1.
Shell installation
Installation Shell
First window that pop up
when you insert the
installation CD.
Press Install 800xA
System Installation Shell
Then push Run on the
other windows who are
popping up.
Installation Shell
This will install the system
shell on your computer.
Press Install
If not Microsoft.NET Framework 1.1 is not installed. This system shell wizard will
automatically install this. When this is done system shell is finished with installation
42
2. Automated installation
Automated Installation
Press Run Automated
Installation
System Planner
This is the system planner.
It will make the system you
want for your
network/computers.
Press Next
43
Choose Medium
Choose CD/DVD and push
DVD button in this window
44
System planner wizard
Press Next
Windows
Here you can choose to use
computer with Windows
installed or if you want to
install windows.
If you choose to use
preinstalled Windows read
the System Installation
guide for prerequisites
before installing the
software.
We have used blank pcs
This option makes a silent
installation of Windows on
c:\
Press Next
45
Nodes
The wizard prompts you to
choose a node setup.
We have used single nodes,
this creates the entire
system on one computer.
Click for Single
Engineering Node
Press Next
Connectivity
Choose the device
connectivity. In this system
there is only the AC 800M.
Press Next
46
Field bus
There is no usage of field
bus.
Press Next
Workgroup/Domain
In this system we use
workgroups.
Press Next
47
Summary
Press Next
Installation
Press Next
48
System Configuration
Choose workgroup, service
account,
password(Narvik8515) and
system description.
Press Next
Summary
Use the default settings on
all but password. Choose
an easier password. We
have used abb here.
Press Next
49
Node Name
Write in the name you
want to use for your
node/nodes
Press advanced
If you want to change the
IP-adress of the
node/nodes. This is not
necessary.
Press Next
System configuration IP
Mark the box as shown in
figure.
Press Next
50
System configuration IP
This will show the IPaddress for the node.
Press Next
Summary
Press Next
51
Setup Package
Choose where to store the
package. Use a diskette.
Press Next
Setup Package
Press Next
52
Setup Package
For information about the
setup package click on the
link in the window.
Press Next
Finished
You have now completed the
System Planner and are
ready to start with the
installation of Industrial IT.
Press Finish
53
Computers without Windows
If you are using computer without Windows, or want to reinstall Windows you have to
choose this in the System Planner.
To do a silent installation insert the Windows CD and the diskette created in System
Planner. This will install Windows automatically with the needed configurations on your
local hard drive (c:\). NB: Silent installation will format all data on local hard drive (c:\)
Installing Windows with the help of the disk you have created in System Planner is the
safest way of installing the system. This is because most of the settings needed by
Industrial IT are set automatically.
When using a pre-installed Windows there are a lot of requisites that have to be done to
your system. These are described in the System Installation book.
54
3. Industrial IT Single node installation guide
The installation of Industrial IT on a computer is self-explaining. We have done a single
node installation and created an installation guide. It is very important that you read the
information given in each step, and that you have patience with each step. If you rush
trough the installation and dont let each step finish it might compromise the rest of the
installation.
Required assets for installing Industrial IT on a computer
Windows XP Professional CD
CD/DVD Package from ABB
Administrator rights on the computer
Microsoft Word and Excel 2003 or newer
Diskette with a system created in System Planner
Turn off Windows Firewall and other firewalls that are included in some virus
programs.
Download all hot fixes for your OS from Windows update on the Internet.
This must be done to have a stable and safe OS before you do anymore
installation. Note: This can only be done if you are using computers with preinstalled Windows. If you are using a blank computer you will be prompted to
install hot-fixes during the installation. This should be done.
If the installation should crash there is two ways of starting it again.
Restart PC, and the installation process should continue.
The other way is to manually restart it as shown in figure below.
- Start
- Programs
- ABB industrial IT 800xA
System
- System Installation Shell
-Continue System installation
55
Manual start of installation, this requires a System Planner diskette
- Start
- Programs
- ABB industrial IT 800xA
System
- System Installation Shell
- Setup a new system
Manually Installation
Start
Manually Installation
Start
Click on Browse
56
Manually Installation Start
Browse after the stored
installed package. File
ending *.cct
Press Next
Manually Installation Start
Example:
*.cct file stored on floppy A:\
Press Next
57
Automated installation, this requires a System Planner diskette.
Installation Start
This is the start of the
installation of Industrial It
on your computer.
This will automatically
start when you have done a
silent Windows
installation.
Press Next
Installation Wizard
The wizard shows what is
about to be done.
Press Next
58
Network Settings
On the installation the
network settings from the
diskette will be used.
Press Next
Network Settings
Shows computer name and
network settings.
Press Next
59
Network Checklist
Press Next
Network Checklist
Press Next
60
Restart
Finish
Installation
Press Next
61
Installation Wizard
Press Next
Windows Components
Press Next
62
Checklist Windows
Press Next
Checklist Windows
Press Next
63
Restart
Press Next
Installation Wizard
Press Next
64
Choosing Workgroup
Here you choose the
workgroup you want to
use.
Press Next
Checklist Windows
Press Next
65
Checklist Windows
Press Next
Restart
Press Next
66
Installation Wizard
Press Next
Add Groups
Creating the groups used in
the 800xA program.
Use the default settings.
Press Next
67
Add Users
Setting up the users.
Press Next
Create Service Account
Setting up the service
account in Windows.
Press Advanced
Input password. We have
used Narvik8515.
Press Next
68
Checklist Windows
Press Next
Checklist Windows
Press Next
Insert the IIT800xA-41-1 DVD#1 in the
DVD-rom.
Press OK
69
Installation Wizard
Press Next
System Checker
Gives you general
information about the
system. Also checks if you
have the needed
administrator rights.
Press Next
70
System Checker
Checks if your PC satisfy
the requirements.
Press Next
System Checker
Checks if needed programs
are installed.
Press Install
This has to be done until all
required programs are
installed.
Press Next
Restart the PC
71
Installation Wizard
Press Next
Installation Wizard
Press Next
72
Check user rights
Press Next
Check hardware
Press Next
73
System Checker
Checks if the Windows
components where
installed.
Press Install
If there is a program
missing, press install on it.
Press Next
System Checker
Checks if 3rd programs are
installed.
Press Install
Install the programs
needed.
Press Info
This will give additional
information on the 3rd party
programs needed.
74
WMI SNMP Provider
This message appears
when pressing info.
Follow this to install WMI
SNMP.
WMI SNMP Provider
Mark the Management
and.. as shown in the
figure.
Press Details
75
WMI SNMP Provider
Mark the checkbox as
shown in the figure.
Press OK
Press Next
When Windows
Component Wizard
window opens. This will
install the component.
System Checker
Press Next
When all 3rd party
programs have been
installed1.
Visual Basic 6.0 does not need to be installed at this point.
76
System Checker
Displays the installation
report.
Press Finish
Backup
We have chosen not do
make a backup in the
installation.
Press Skip
77
Install Industrial IT
This is when you start to
install the Industrial IT
software.
Press Install
Choose installation medium
Choose the medium you want to install the
software package from.
Press Cancel
78
Information Box
Press OK
Installation
Write the password you
have chosen in the
password block.
Press Next
79
Installation
Settings that will be
executed.
Press Next
Installation
Press Next
80
Installation
The rest of the steps are
automated.
When installation is
complete, do a restart of
the computer.
The installation takes time
and you should not restart
the computer or start any
other programs while
install.
81
Appendix VI. Post installation
After system installation has been done, your new system must be configured on your
computer. This is a walkthrough of what is necessary to do in the post installation.
Open Post installation document file [6]. Follow this instruction and start Configuration
wizard from the Start menu as shown in Figure 22.
Figure 22 Configuration Wizard start
Configuration wizard window will pop up, as shown in Figure 23
1. Chose Create system, see Figure 23. After choosing your configuration options
the system will configure itself with your options. This configuration will take
approximately 35 minutes. Do nothing on your computer while this is being
installed.
2. Check that connectivity server is running.
3. Check that firmware version in AC 800M controller is similar to the version in the
program Control builder M professional.
Figure 23 Configuration Wizard
82
