Scribd
Upload
751 views

Science - Physics - Lab Report: Hypothesis Part A: Planning

This lab report outlines an experiment to test the hypothesis that the closer an object is to a converging lens, the greater its magnified image will be. The experiment will measure the focal length of a lens using the distant object method and then measure the height of the magnified image on a screen as the distance between the lens and object is varied. Key equipment includes an illuminated object, lens, stands, clamps, rulers, and white screen. The distance between the lens and screen will be changed while keeping other variables like the equipment constant. Potential risks include the lens chipping or breaking and the light bulb getting hot or breaking.

Uploaded by

OmarMustafa
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
751 views

Science - Physics - Lab Report: Hypothesis Part A: Planning

This lab report outlines an experiment to test the hypothesis that the closer an object is to a converging lens, the greater its magnified image will be. The experiment will measure the focal length of a lens using the distant object method and then measure the height of the magnified image on a screen as the distance between the lens and object is varied. Key equipment includes an illuminated object, lens, stands, clamps, rulers, and white screen. The distance between the lens and screen will be changed while keeping other variables like the equipment constant. Potential risks include the lens chipping or breaking and the light bulb getting hot or breaking.

Uploaded by

OmarMustafa
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Science - Physics - Lab Report

Hypothesis
Our hypothesis is that the closer an object is to a converging lens, the greater its
magnified image will be

Part A: Planning
Equipment:

Illuminated object: We will need this in our investigation because we need light for
the practical itself. Without this, the practical would be incomplete.
Lens: We need the lens as we need to measure the focal distance of the lens.
Once again, without this there would be no practical.
Stands and clamps: The stands and clamps are necessary, as we need these in
order to hold the ruler, lens, white screen up. Without these would need a person
to hold the ruler, someone to hold the lens and someone to hold the white screen,
it would be extremely unpractical
Metre ruler marked in millimetres : The metre ruler in millimetres is essential as it
is long and is easy to handle. If it was to be short, it would be much harder to
work with. Furthermore, by having it in millimetres, the readings will be much
more accurate in comparison to centimetres.
Ruler marked in millimetres: We will need this to measure the reflected object on
the white screen. In millimetres as we will have accurate readings resulting in
accurate results.

White screen: The white screen is essential for our investigation because the
object will be shown on this. Without this, we will not be able to see the image
that should show. Which basically that we have no experiment

Variables
Keep the same:
Metre stick: By measuring on the same metre stick, it will ensure that there is no
confusion in the type of measurement.
Ruler in millimetres: This would also be kept the same so that there is no
confusion in the type of measurement that we are using.

White screen: The white screen shall be kept the same, this is because, if we
change the screen which in be impractical .
Stands and clamps: The stands and clamps will also stay the same, because if
we were to change them, then we would have to reposition it in the exactly same
position. This would require pin-point accuracy.

Change:
Distance from lens and screen: We will change the distance from the lens to the
screen to measure different focal lengths from various distances.

Risks and Hazards:


Lens chipping: The lens could fall out of position and could break or chip. If
broken then the glass could get into our body resulting in casualties. If chipped
then there could be sharp edges it gut cause a deep cut which is a large risk. This
could be preventing by focusing on our task and taking care of everything we do.
Hot bulb: If the bulb is hot and we accidently touch it then there is a high
possibility of us burning our hands. This is dangerous as it can severely harm our
body.
Bulb breaking: The bulb could break and could shatter. If this happens we could
damage ourselves as glass could get into our bodies and cause harm. By the
bulb shattering, it could also cause harm to those around us as it is not easy to
spot small glass pieces.
This could be prevented by concentrating on out task and doing our investigation
with care.

What we are going to do

We will start by measuring the focal length of our lens using the distant
object method
We tehn measure the height of out object
Then we set up the object and screen between them so that we can focus
a clear image of the object onto the screen
Then we set the distance from the lens to the object at twice the focal
length

You might also like