GRUNDFOS DATA BOOKLET

CR64-3-2 A-F-A-E-HQQE 3x400/690 50 HZ

Grundfos Pump 96123531

Thank you for your interest in our products

Please contact us for more information, or visit our website
http://www.lenntech.com/grundfos/CRFAM/96123531/CR-64-3-2-A-F-A-E-HQQE.html
[email protected]
tel. +31-15-261.09.00
fax. +31-15-261.62.89

BE > THINK > INNOVATE

Company name:
Created by:
Phone:
Fax:
Date:
Position

Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-

Qty. Description
1

CR 64-3-2 A-F-A-E-HQQE

Note! Product picture may differ from actual product

Product No.: 96123531

Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron all
other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling
and easy service and access. Power transmission is via a split coupling. Pipework connection is via
DIN flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product details

The product carries the Grundfos Blueflux label. It represents the best from Grundfos within
energy-efficient motors and frequency converters. Grundfos Blueflux solutions either meet or
exceed legislative requirements such as the EuP IE3 grade.

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.

Pump
A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means
of two coupling guards. The long coupling makes it possible to replace the shaft seal without
removing the motor from the pump.

Printed from Grundfos CAPS [2013.03.059]

1/9

Company name:
Created by:
Phone:
Fax:
Date:

Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-

The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming plug and air
vent screw.

The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is retained in the pump head by a cover and screws. It can be replaced without
removing the motor.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The base is made of cast iron. Both the suction and the discharge side of the base have two
pressure gauge tappings. The pump is secured to the foundation by four bolts through the base
plate. The flanges are fastened to the base by means of locking rings.

Printed from Grundfos CAPS [2013.03.059]

2/9

Company name:
Created by:
Phone:
Fax:
Date:
Position

Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-

Qty. Description

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with free-hole flange (FF).
Motor mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.
The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled
conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the
automatic reset cannot cause accidents. The motors must be connected to a motor-protective circuit
breaker according to local regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any
duty point. Grundfos CUE offers a range of variable speed drives. Please find more information in
Win-/WebCAPS.

Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:

Water
243 .. 393 K
293 K
998.2 kg/m

Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Approvals on nameplate:
Curve tolerance:

2923 rpm
64 m/h
52.8 m
HQQE
CE,TR
ISO 9906:1999 Annex A

Materials:
Pump housing:

Impeller:

Cast iron
EN-JS1050
ASTM 80-55-06
Stainless steel
DIN W.-Nr. 1.4301
AISI 304

Installation:
Maximum ambient temperature: 333 K
Max pressure at stated temp:
16 bar / 120 C
16 bar / -30 C
Flange standard:
DIN
Pipe connection:
DN 100
Pressure stage:
PN 16
Flange size for motor:
FF300
Electrical data:
Motor type:
IE Efficiency class:

Printed from Grundfos CAPS [2013.03.059]

160MD
IE3

3/9

Company name:
Created by:
Phone:
Fax:
Date:
Position

Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-

Qty. Description
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):

2
15 kW
15 kW
50 Hz
3 x 380-415 D/660-690 Y V
28,0-26,0/16,2-15,6 A
660-780 %
0,89-0,87
2930-2950 rpm
IE3 91,9%
91,9-91,9 %
92,4-92,7 %
92,4-92,3 %
55 (Protect. water jets/dust)
F

Others:
Label:
Grundfos Blueflux
Minimum efficiency index, MEI : 0.7
Net weight:
180 kg
Gross weight:
213 kg
Shipping volume:
0.42 m3

Printed from Grundfos CAPS [2013.03.059]

4/9

Company name:
Created by:
Phone:
Fax:
Date:

Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-

96123531 CR 64-3-2 50 Hz
H
[m]

CR 64-3-2, 50Hz

eta
[%]

Pumped liquid = Water

Liquid temperature = 293 K
Density = 998.2 kg/m
75
70
65
60
55
50

100

45

90

40

80

35

70

30

60

25

50

20

40

15

30

10

20

10

0
0

10

15

20

25

30

P2
[kW]

35

40

45

50

55

60

65

70

75

80

85

Q [m/h]
NPSH
[m]

14

14

12

12

10

10

Printed from Grundfos CAPS [2013.03.059]

5/9

Company name:
Created by:
Phone:
Fax:
Date:

10

20

30

40

50

10

8 x 18
G 1/2

331
365

248

190
G 1/2

160MD
IE3
2
15 kW
15 kW
50 Hz
3 x 380-415 D/660-690 Y V
28,0-26,0/16,2-15,6 A
660-780 %
0,89-0,87
2930-2950 rpm
IE3 91,9%
91,9-91,9 %
92,4-92,7 %
92,4-92,3 %
55 (Protect. water jets/dust)
F
PTC

100

PN16

G 1/2

350

Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:

204

Water
243 .. 393 K
293 K
998.2 kg/m

4 x 14

10

314

Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:

80 Q [m/h]

CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY

THERMISTORS PTC ACCORDING TO DIN 44082

Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:

70

266

Cast iron
EN-JS1050
ASTM 80-55-06
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
A
E

333 K
16 bar / 120 C
16 bar / -30 C
DIN
F
DN 100
PN 16
FF300

60

NPSH
[m]

471

Installation:
Maximum ambient temperature:
Max pressure at stated temp:

0
P2
[kW]

836

Material code:
Code for rubber:

100
90
80
70
60
50
40
30
20
10
0

140

Impeller:

70
65
60
55
50
45
40
35
30
25
20
15
10
5
0

45

Materials:
Pump housing:

2923 rpm
64 m/h
52.8 m
70.1 m
3
2
HQQE
CE,TR
ISO 9906:1999 Annex A
CR 64
3
A
A

eta
[%]

150

Technical:
Speed for pump data:
Rated flow:
Rated head:
Head max:
Impellers:
Impeller reduc.:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
Pump type:
Stages:
Pump version:
Model:

CR 64-3-2 A-F-A-E-HQQE
96123531
5700396697413

CR 64-3-2, 50Hz
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m

180

Product name:
Product No:
EAN number:

H
[m]

Value

220

Description

Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-

L2

L3

+T

L1

+T

TO AMPLIFIER
RELAY

+T
TO AMPLIFIER
RELAY

+T

L1

+T

L2

L3

+T

IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE

Printed from Grundfos CAPS [2013.03.059]

6/9

Company name:
Created by:
Phone:
Fax:
Date:
Description

Value

Motor No:

85U17526

Others:
Label:
Minimum efficiency index, MEI :
Net weight:
Gross weight:
Shipping volume:

Grundfos Blueflux
0.7
180 kg
213 kg
0.42 m3

Printed from Grundfos CAPS [2013.03.059]

Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-

7/9

Company name:
Created by:
Phone:
Fax:
Date:

Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-

96123531 CR 64-3-2 50 Hz

204

471

314

350

G 1/2

836

PN16

G 1/2

190

45

248

100
266

365

331

220

140

150

G 1/2

180

8 x 18

4 x 14

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos CAPS [2013.03.059]

8/9

Company name:
Created by:
Phone:
Fax:
Date:

Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-

96123531 CR 64-3-2 50 Hz

+T

+T

TO AMPLIFIER
RELAY

L1

+T

L2

+T

L3

+T

TO AMPLIFIER

IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE

CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
THERMISTORS PTC ACCORDING TO DIN 44082

+T

RELAY

L1

L2

L3

Note! All units are in [mm] unless others are stated.

Printed from Grundfos CAPS [2013.03.059]

9/9

Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.

[email protected]
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89