This document provides specifications for the D1400N pump including dimensions, weights, maximum stages and part numbers for different housing lengths and materials. Performance curves are given showing the relationship between head pressure, power required and flow rate for various pump speeds.
This document provides specifications for the D1400N pump including dimensions, weights, maximum stages and part numbers for different housing lengths and materials. Performance curves are given showing the relationship between head pressure, power required and flow rate for various pump speeds.
This document provides specifications for the D1400N pump including dimensions, weights, maximum stages and part numbers for different housing lengths and materials. Performance curves are given showing the relationship between head pressure, power required and flow rate for various pump speeds.
This document provides specifications for the D1400N pump including dimensions, weights, maximum stages and part numbers for different housing lengths and materials. Performance curves are given showing the relationship between head pressure, power required and flow rate for various pump speeds.
Requires use of buttress threads in uppermost pump Requires use of high-strength shaft in lowermost pump
ESP Catalog
2005 Schlumberger. All rights reserved.
Return to Pumps
Pumps
D1400N Pump
Head (ft)
500
750
1,000
1,500
1,750
125 hp 200 hp 5,000 psi 6,000 psi 6,000 psi
3.00
Power (hp)
250
Power
2005 Schlumberger. All rights reserved.
*Mark of Schlumberger
Return to Pumps
This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power, and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
Capacity (B/D)
1,250
0 2,000
0.50
1.00
1.50
10
15
2.00
Operating range
Standard High strength Standard Buttress Welded
60 Hz, 3,500 rpm
20
Efficiency
Housing burst-pressure limit
Shaft brake-power limit
Curve computed for one stage in fluid of 1.00 sg.
2.50
Head
9601,700 B/D 4.00 in. 0.688 in. 0.371 in.2 5.500 in.
Return to Pumps D1400N Pump Performance Curve
25
30
Optimum operating range
Nominal housing diameter Shaft diameter Shaft cross-sectional area Min. casing size
REDA* ESP
10
20
30
40
50
60
Efficiency (%)
Return to Pumps
REDA* Pump D1400N Performance Curve
Curve computed for one stage in fluid of 1.00 sg.
40 70 Hz
35
65 Hz
30
Head (ft)
60 Hz
25
55 Hz 20 50 Hz 15 10 5
70 Hz
0.50 65 Hz
0.40 Power (hp)
60 Hz
0.30 55 Hz 0.20
50 Hz
0.10
250
500
750
1,000
1,250
1,500
1,750
2,000
2,250
2,500
Capacity (B/D)
2005 Schlumberger. All rights reserved.
*Mark of Schlumberger
ESP Catalog
Return to Pumps
Pumps
D1400N Pump
Head (m)
25
75
100
125
150
200
225
250
104 hp 167 hp 34,475 kPa 41,370 kPa 41,370 kPa
3.00
Power (hp)
0 Capacity (m3d)
2005 Schlumberger. All rights reserved.
*Mark of Schlumberger
Return to Pumps
This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for Head, Power, and Efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.
50
Power 175
0 275
0.50
1.00
2.00
1.00
1.50
3.00
2.00
Operating range
Standard High strength Standard Buttress Welded
50 Hz, 2,917 rpm
4.00
Efficiency
Housing burst-pressure limit
Shaft brake-power limit
Curve computed for one stage in fluid of 1.00 sg.
2.50
Head
127225 m3 d 10.16 cm 1.75 cm 2.39 cm2 13.97 cm
Return to Pumps D1400N Pump Performance Curve
5.00
6.00
Optimum operating range
Nominal housing diameter Shaft diameter Shaft cross-sectional area Min. casing size
