Scribd
Upload
150 views3 pages

2 Cre

A chemical reaction engineering exam covers several topics: 1) Calculating conversion of a second order reaction in a PFR and CSTR reactor. Conversion is 50% in the PFR and the question asks to calculate CSTR conversion. 2) Equations to model concentration over time for two sequential irreversible reactions in a batch reactor and to calculate activation energy from rate data. 3) Calculating steady state temperature and conversion in a CSTR for a first order reaction. 4) Determining the intrinsic rate constant and predicted rate for a catalyst particle size from rate data accounting for intraparticle diffusion effects. 5) Calculating average residence time and conversions for first and second order reactions in a reactor with an

Uploaded by

Damien Marley
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
150 views3 pages

2 Cre

A chemical reaction engineering exam covers several topics: 1) Calculating conversion of a second order reaction in a PFR and CSTR reactor. Conversion is 50% in the PFR and the question asks to calculate CSTR conversion. 2) Equations to model concentration over time for two sequential irreversible reactions in a batch reactor and to calculate activation energy from rate data. 3) Calculating steady state temperature and conversion in a CSTR for a first order reaction. 4) Determining the intrinsic rate constant and predicted rate for a catalyst particle size from rate data accounting for intraparticle diffusion effects. 5) Calculating average residence time and conversions for first and second order reactions in a reactor with an

Uploaded by

Damien Marley
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Chemical Reaction Engineering

Ph. D. Qualifier examination


Open book (Scott Fogler) exam
1. A second order irreversible liquid phase reaction A +B C takes place in a Plug
flow reactor (PFR). The feed to the reactor is 50 kmol/hr of each reactant. The
total conversion is 50%. The reaction kinetics is rA = -k CACB where k is 0.5 m3/
kmol/hr. The same reaction is to be performed in a CSTR of equal volume.
Calculate the conversion in the latter case. The concentration of A in the feed is 5
mol/lit.
If the reaction was in gas phase, would the answer be different? If yes, write the
relevant equations (do not solve) to recalculate the conversion.
[20]
2. a. For a reaction A B C (all are irreversible and elementary reactions), give
the equations to be solved to obtain the concentration of B in a batch reactor as a
function of time. Give qualitative profiles of all the species as a function of time.
b.
For an irreversible reaction the reaction rate doubles when
temperature is increased from 300K to 310 K. Calculate the activation energy.
c.For the following graph of a solid-catalytic reaction, in each case which process
governs the overall rate? -intrinsic kinetics, external mass transfer or intraparticle
diffusion. Justify your answer.
C
A
ln (-rA)

1/T
[20]
3. A first order homogeneous liquid-phase reaction is carried out in an ideal stirred
tank reactor. The concentration of the reactant in the feed is 3.0 kmol/m3 and the
volumetric flow rate is 60 x 10-6 m3/sec. The density and specific heat for the
reaction mixture are constant at 1000 kg/m3 and 4.19 kJ/kg.K, respectively. The
reactor volume is 18 lit. There is no product in the feed stream and reactor
operates adiabatically. The heat and rate of reaction are -2.09 x 108 J/kmol and
rA = - 4.48 x 106 CA exp (- 62,800/RT) kmol/m3/sec
where, activation energy is in SI units. CA is the reactant concentration in
kmol/m3. T is in K and R= 8.314 J/mol/K. If the feed is at 273 K what is the

steady state product temperature and conversion? (Hint: the conversion is beyond
90%).
[20]
4. The rate of isomerization of n-butane on a silica-alumna spherical catalyst
measured at 5 atm and 50oC, in a laboratory reactor with high turbulence in the
gas phase surrounding the catalyst pellet is given below. Turbulence ensures that
the external diffusion resistances are negligible. Kinetic studies indicate that the
rate is first order and irreversible. The effective diffusivity is 0.08 cm2/sec at the
reaction conditions, and the density of the catalyst pellet is 1 g/cm3 regardless of
the size. The measured rates when pure n-butane surrounds the catalyst are as
follows:
Particle
diameter (in)

1/16

1/8

3/8

Rate
mol/sec/g of
catalyst

4.88 x 10-4

4.85 x 10-4

4.01 x 10-4

3.54 x 10-4

1 x 10-5

From the above data, determine the intrinsic first order rate constant in the
absence of intraparticle diffusion. Also predict the rate if the particle size is 1.5
inch. It may be assumed that effectiveness factor () is inverse of Thiele modulus
() (i.e. = 1/) when 0.25.
[20]
5. A reactor of irregular geometry offers following E curve. Calculate the average
residence time. Also determine the conversion in each of the following cases (i
and ii) if complete segregation of feed streams is assumed to take place.
i)
For a first order reaction rA = -0.1 CA (kmols/hr/m3)
ii)
For a second order reaction in problem 1,
Also, what will be the conversion for the first order reaction in case-i for the
maximum mixedness case?

E(t) hr-1
2.0

0.0

0.5

1.0

Time (hr)
[20]

You might also like