Generating clean & sustainable energy

Biodiesel Technologies

#048

Desmet Ballestra : The right partner

Introduction
Desmet Ballestra is an engineering group operating all over the
world in the oils & fats industry
and various areas of the organic/
inorganic chemical industry but
with a special skill in the design
and supply of process units for
the production of surfactants, formulated detergents and other raw
materials for personal and home
care products.
In this field Desmet Ballestra
holds the leading position with
over 1,000 plants supplied in
more than 100 countries and for
clients ranging from small producers to large multinational
companies.
Desmet Ballestra started the development of the Methylester
Technology in the early eighties
through an intensive R&D program in the field of the
methylester production, mainly
finalized to the production of a
convenient raw materials for surfactant production as alternative
to LAB and fatty alcohol.
As a logical consequence of the
deep experience acquired in the
esterification of surfactants intermediate products, Desmet
Ballestra has developed a continuous transesterification process to produce Diesel-Fuel Substitutes (BIODIESEL) starting
from a wide range of vegetables
oils of various purity (crude/neutral/refined), including exhaust
and fried oils from edible/food
applications without the need for
a full refining step up-stream.
This flexibility allows to use raw
material cheaper than traditional
processes based only on refined
oils.

Desmet Ballestra is nowadays in

a position to design and to supply Biodiesel production plants
sized in a wide range of production capacities (from 10,000 up to
200,000 T/y), coping with the
most stringent international
standard specifications.
Optional units such as (upstream)
Oil Refining and (downstream)
Glycerine Upgrading can be
added, upon customer request.
A continuous-type industrial plant
of 30,000 tons/y has been then
installed at the Estereco factory
in Umbertide. This plant has
been started-up in 1993 and
since then it is producing
biodiesel, meeting the latest and
most stringent European quality
standards.
Desmet Ballestra was also
awarded a turn-key contract for
another
30,000
tons/y
methylester production plant form
rapeseed oil to be installed in
Germany and has developed the
basic engineering for plants having capacity ranging up to
150,000 tons/y.

Desmet Ballestra has been recently awarded a contract for the

design of a new biodiesel plant
having a capacity of 100.000 TPY
based on continuous transesterification technology to be installed
in Livorno, Italy for Novaol (Bunge
Group) which is the major
biodiesel producer in Europe.
The new plant was started-up in
November 2004.
In the mean time 2 new biodiesel
plants are under construction in
Greece and Portugal.
The biodiesel can be produced
meeting the latest and most stringent European and/or US ASTM
standard specifications.

......for your Biodiesel Project

Technology

Overall scheme

The Ballestra Technology is

based on a 3-step Continuous
Transesterification Unit that allows to operate under mild operating conditions with constant
quality and minimised specific
consumption of raw materials and
energy.

The overall technological scheme

offered by Ballestra for the production of Biodiesel and Glycerine starting from seeds and/or
crude/neutral and/or refined vegetable oils, mainly:

The plant design is targeted also

to reduce to a negligible extent
the process effluents with consequent virtual elimination of pollutant and process wastes.

- rapeseeds
- sunflower
- soybean
- recovered fried oil
is summarised here below:

DESMET BALLESTRA BIODIESEL TECHNOLOGY

OIL
PRODUCTION

OIL
PRE-TREATMENT

BIODIESEL
PRODUCTION

GLYCERINE
RECOVERY

Seeds cleaning/drying
Oil degumming

Transesterification

Oil neutralization

Biodiesel purification

Seed pressing
Solvent extraction
Glycerine separation
Meal treatment
CH3OH recovery

Oil drying

CRUDE OIL

REFINED OIL

BIODIESEL

Glycerine purification
Glycerine
concentration
Glycerine distillation

DISTILLED
GLYCERINE

OPERATING
PRINCIPLES
How does it operate?

High yields

High Quality Glycerine

The Biodiesel production section,

namely the Transesterification of
Oils and the Biodiesel Purification
step are characterised by unique
features that with reference to the
illustrated Process Block Diagram, are here below described:

The yield of the continuous

transesterification is 99,8% calculated as ratio of Neutral / Refined Oil fed to the transesterification versus the produced
Biodiesel

Partially refined glycerine can be

delivered as such or sent to the
upgrading-distillation section up
to pharmaceutical grade meeting
the most stringent pharmacopea
specifications.

The transesterification reaction is

accomplished in 3 steps with a
methanol surplus with respect to
the stoichiometric quantity, using
an alkali methylate in anhydrous
methanol solution as a catalyst.
Methanol and catalyst are dosed
and recycled to the 3 reaction
steps within prefixed rates.
Reaction temperatures are lower
than 60C and pressure is max
0,5 bar(g). Overall residence time
of the whole plant is 2 hours
approx.

At the end of the transesterification process, two phases are

accurately separated.
Purification of the upper
methylester phase involves separation of unreacted methanol,
washing with water solutions and
final drying.
Purification of the lower glycerine phase involves: neutralisation, separation of unreacted
methanol, dilution with wash liquid stream coming from
methylester washing, splitting of
soaps and final concentration up
to 88 - 90%.

BIODIESEL PRODUCTION DIAGRAM

Catalyst

CH3OH

Oil

Multistep
Transesterification

CH3OH Recovery

CH3OH Stripping
Glycerine -phase

CH3OH Distillation

ME/Glycerine
Separation
ME-phase

CH3OH Stripping

Methylester
Washing

Wet CH3OH

Methylester
Drying

Glycerine
Purification

Wet CH3OH

Glycerine
Concentrat./Distillation

GLYCERINE

BIODIESEL

MAIN
ADVANTAGES
These operations are performed
by means of process sequence
and equipment characterised by:

Mild operating conditions

Completely Computerised
Process Control System

Simple mechanical design of

the process equipment and
negligible maintenance demand

Small overall dimensions of

the Units and equipment

In particular the Transesterification step entails these peculiarities:

Continuous operation-mode
with multiple glycerine separation for each single step
Enhanced reactor Kinetics
due to the Solvation effect
of the excess Methanol vs.
the quantity of oil to be reacted

Limited product hold-up

Operation flexibility deriving

from the possibility to dose
the reactants to the 3 steps
in variable and specifically
pre-set quantities

Possibility to process oils of

widely variable quality and origin
Easy and accurate control of
the process key-parameters
(temperatures pressures and
flow rates)

When accounting for the kinetics

aspects of the transesterification
reaction, a continuous process
shows peculiar advantages with
respect to the traditional batch
process, as herebelow detailed:
The initial step of the reaction
consists in the solvation of the oil
molecules by the excess reactant
(methanol); this step is slow, due
to the scarce affinity between the
two reactants and is accelerated
by the presence of methylester
that, being a mutual solvent, acts
as a phase transfer agent.
In a batch system, where no
methylester is initially present in
the reaction mixture, the
transesterification reaction requires, therefore, a dwell time
before appreciable amount of
methylester are produced.
Conversely, in a continuous process, the two reactants are fed to
a reaction mixture containing the
steady state methylester amount,
and the overall kinetics is enhanced by the resulting fast contact between the two reactants.
An almost tenfold viscosity reduction is observed when oil is converted to methylester; the steady
state viscosity of a continuous
reactor is, therefore, consistently
lower than the initial reaction mixture viscosity of a batch system,
which allows an overall higher
mixing intensity at comparable
mixing energy inputs.
The above aspects add up to the
general advantages of a continuous process (reduced equipment
sizes at given plant capacity
thanks to the elimination of loading/unloading dead times, reduced energy and utilities consumption, easier automation of
process control, higher product
quality uniformity), making it almost a must, once the economics of a commercial scale plant
are accounted for.

As for the plant safety management, the reduced reaction volumes imply that much lower
methanol amounts are present at
any time in the process sections,
which greatly reduces the fire
hazard.
A further feature, unique to the
Ballestra continuous process, resides in the dedicated reactors
design, which allows the continuous separation of the glycerine
phase from the reaction mixture
within each of the three reaction
steps.
This allows shifting the reaction
equilibrium toward the products,
so maximising the yield, and to
minimise the catalyst consumption.
As for the downstream
Methylester purification unit, the
Ballestra technology foresees the
following steps:

Evaporation (BEFORE the

Methylester washing section)
of most (85% approx.) of the
unreacted methanol in dry
form, suitable for direct recycle to the transesterification section.

Washing of the residual glycerine and soaps by means of

water; the water phase leaving from this section is recycled to the glycerine purification section

Final Methylester drying; the

wet methanol stream separated in this section is sent to
a rectification unit, in order to
recover it to the transesterification section.

KEY-FEATURES of BIODIESEL PRODUCTION

1)Continuous MultistepTransesterification of oils with multiple glycerine separation
2)Mild Operating Conditions and High Operation Safety
3)Complete Computer Control of the Process
4)Equipment of simple mechanical design, with high efficiency and negligible maintenance
5)Well proven technology for oil production and refining
6)State-of-the-Art Technology for Glycerine purification, concentration and distillation.

KEY-FEATURES of TRANSESTERIFICATION
1)Small overall dimensions of process unit and equipment
2)Three steps reaction section
3)Limited product hold-up
4)Easy and accurate dosing of reactants
5)Glycerine recuperation at each reaction step.
6)Enhanced reaction kinetic thanks to solvation effect of excess CH3OH versus oil to be reacted.
7)Possibility to process a wide range of natural oils.

Biodiesel according to european specification EN 14214

Property
Density at 15C
Viscosity at 40C
Flash point range
Cold Test CFFP

Unit
kg/m
mm2/s
C

Sulphur content
Carbon residue
Acid value
Cetane number
Ash Content
Water content
Sediment
Total contamination
Copper corrosion
Oxidation Stability
Ester contact
Methanol content
Monoglycerides content
Triglycerides Content
Free glycerine Content
Total glycerine content
Iodine number
Phosphorus
Alkali content (Na+K)

mg/kg
% (m/m)
mg KOH/g
% (m/m)
mg/kg
Vol.%
mg/kg
rating
hours
% (m/m)
% (m/m)
% (m/m)
% (m/m)
% (m/m)
% (m/m)
mg/kg
mg/kg

Limits
Min
Max
860
900
3,5
5.0
120
Summer max 0C
Winter max.-20C
10
0.3
0.5
51.0
0.02
500
0.05
24
Class 1
6
96.5
0.2
0.8
0.2
0.02
0.25
120
10
5

Test Method
EN ISO 3675+12185
EN ISO 3104
ISO/CD 3679

EN ISO 10370
prEN 14104
EN ISO 5165
ISO 3987
EN ISO 12937
EN 12662
EN ISO 2160
prEN 14112
prEN 14103
prEN 14110
prEN 14105
prEN 14105
prEN 14105+6
prEN 14105
prEN 14111
prEN 14107
prEN 14108+9

BIODIESEL PRODUCTION PLANT

BASE PLANT CONFIGURATION
CRUDE OIL
903,95 Kg
3

H3PO4 @ 80%

U.F.O. OIL
129,15 Kg

1A

B.L.

NaOH @ 50%

REFINED OIL
874,11 Kg

CRUDE OIL
PRETREATMENT

Soapstock @
40% Dry matter

UFO DRYING

OIL DRYING

Waste Water
B.L.

Waste
Water

1B

Process water

Water

TOTAL OIL
1002 Kg

Dry Oil

Dry U.F.O.
5

Catalyst: Sodium Methylate

Fresh
Methanol

Esterified U.F.O.

TRANSESTERIFIC.

Methanol

Reaction
Mixture

Citric Acid

CITRIC ACID
SOLUTION
PREPARATION

Acidified Wet
Methanol

SEPARATION

H2SO4 @ 96%

ESTERIFICATION

HCl @ 36%

Crude Glycerine

NaOH @50%

GLYCERINE
TREATMENT

Methylester

Fatty Acid

Wet Methanol

FINAL FLASH

Wet Methanol

METHANOL
DISTILLATION

Dry Methanol

Water

116,87 Kg
Glycerine @ 88 %

1000 Kg
Biodiesel

Water
Dry Methanol
Waste Water
(max. 0,1% of Methanol)
B.L.

Stream 1A + 1B
Refined oil: Rape-Soy-Sun
FFA:
0.1% max
Moisture:
0.1% max
Impurities: 0.1% max
Phosphor: 10 mg/Kg max
Unsaps:
1.0% max

B.L.

Stream 2
U.F.O.: Used Frying Oil
FFA:
5% max
M&I:
0.5% max
Susp.solids: 0.5% max
Stream 4
Dry oil
FFA:
Moisture:
Impurities:
Phosphor:
Unsaps:

0.1% max
0.03% max
0.1% max
10 mg/Kg max
1.0% max

Stream 3
Crude Oil: Rape-Soy
FFA:
2% max
M&I:
0.3% max
Phosfor:
300 mg/Kg max
Stream 5
Dry U.F.O.: Used Frying Oil
FFA:
5% max
M&I:
0.03% max
Susp.solids: 0.5% max

Worldwide presence... close to you

Desmet Ballestra Offices
BELGIUM
ITALY
RUSSIA
TURKEY

UK
SPAIN

CHINA

USA

MEXICO

INDIA

COLOMBIA

MALAYSIA
SINGAPORE

BRAZIL

ARGENTINA

UAE

On line info on our new Website

www.desmetballestraoleo.com

600 People operating in 27 languages

Produced for Desmet Ballestra Oleo S.p.A, 2004/12.
Via dei Castelli Romani, 2L - Pomezia 00040, Rome
Tel.: +39 06 911 821 Fax.: +39 06 910 6762 http://www.desmetballestraoleo.com