QuickTime 7.

3
Users Guide
Includes instructions for
using QuickTime Pro
For Mac OS X version 10.3.9 or later, and Windows

K Apple Inc.
2007 Apple Inc. All rights reserved.
Under the copyright laws, this manual may not be
copied, in whole or in part, without the written consent
of Apple. Your rights to the software are governed by
the accompanying software license agreement.
The Apple logo is a trademark of Apple Inc., registered
in the U.S. and other countries. Use of the keyboard
Apple logo (Option-Shift-K) for commercial purposes
without the prior written consent of Apple may
constitute trademark infringement and unfair
competition in violation of federal and state laws.
Every effort has been made to ensure that the
information in this manual is accurate. Apple is not
responsible for printing or clerical errors.
Apple
1 Infinite Loop
Cupertino, CA 95014-2084
408-996-1010
www.apple.com

Apple, the Apple logo, AppleScript, Final Cut Pro,

FireWire, iMovie, iPod, iTunes, Mac, Mac OS, Macintosh,
QuickDraw, and QuickTime are trademarks of Apple Inc.,
registered in the U.S. and other countries. Finder,
iPhone, and Tiger are trademarks of Apple Inc. Apple
Store is a service mark of Apple Inc., registered in the
U.S. and other countries. .Mac is a service mark of Apple
Inc.
Intel, Intel Core, and Xeon are trademarks of Intel Corp.
in the U.S. and other countries.
PowerPC is a trademark of International Business
Machines Corporation, used under license therefrom.
Other company and product names mentioned herein
are trademarks of their respective companies. Mention
of third-party products is for informational purposes
only and constitutes neither an endorsement nor a
recommendation. Apple assumes no responsibility with
regard to the performance or use of these products.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
UnPublished Works, 19921997 Dolby Laboratories,
Inc. All rights reserved.
Simultaneously published in the United States and
Canada. 019-1032/2007-09-01

Contents

Preface

6
6
6
7
7
8
9
9
10
10
10

Welcome to QuickTime
What Is QuickTime?
What Is QuickTime Pro?
Whats New in QuickTime 7?
New in QuickTime Player
New in QuickTime Pro
System Requirements
Types of Files QuickTime Supports
Checking for New Versions of QuickTime
Using Onscreen Help
Where to Go for Additional Information

Chapter 1

11
11
11
12
15
16
16
17
17
17
18
18
18
18
19
20
20
20
21
21
22

Using QuickTime Player

Opening and Playing Files
Opening and Playing Movies in QuickTime Player
Opening and Playing Files in a Web Browser
Viewing QuickTime Virtual Reality (QTVR) Movies
Viewing Still Images
Playing MIDI Files
Opening Recently Used Files
Finding Movies Quickly Using QuickTime Favorites
Playing Copy-Protected Movies
Viewing Information About a File
Controlling Playback
Adjusting Audio and Video Settings
Changing Playback Preferences
Viewing Movies at Full Screen
Changing Movie Size for Playback
Looping a Movie
Simultaneously Playing Multiple Movies
Using Frame Number and Time Codes
Navigating a Movie by Frame Number or Time Code
Finding Text in a Text Track

22
22

Preventing Users from Changing QuickTime Settings

Viewing Movies that have Flash Content

Chapter 2

23
23
23
23
24
24
25
25
25
26
27
27
28
28
29
29

Getting Started with QuickTime Pro

Getting QuickTime Pro
Using Advanced Playback Options
Playing a Movie on a Second Display
Presenting a Movie as a Slideshow
Changing the Color Around a Movie
Loading Movies into RAM for Better Playback
Creating Movies and Other Media
Recording Video and Audio
About Saving Movies
Saving Movies from the Internet
Creating a Slideshow or Animation from Still Images
Creating a Still Image from a Movie
Converting Files into QuickTime Movies
Sharing Movies by Email or the Web
Sharing Movies for Podcast Producer

Chapter 3

30
30
30
31
31
32
32
32
33
34
35
35
37
38
38
38
39
39
39
41
41
41

Editing and Authoring with QuickTime Pro

Simple Editing
Selecting and Playing Part of a Movie
Cutting, Copying, or Deleting a Section of a Movie
Combining Two QuickTime Movies into One
Working with Tracks
Turning Tracks On or Off
Extracting, Adding, and Moving Tracks
Working with Audio Tracks
Presenting Multiple Movies in the Same Window
Pasting Graphics and Text into a Movie
Working with Text Tracks
Specifying Languages for Individual Tracks
Changing Movie Properties
Adding Annotations to a Movie
Resizing, Flipping, or Rotating a Movie
Changing a Movies Shape with a Video Mask
Changing a Tracks Transparency
Creating a Chapter List for a Movie
Setting a Movies Poster Frame
Saving a Movie with Specific Playback Settings
Changing the Movie Controller Type

Contents

Chapter 4

42
42
43
43
43
45
45
46
46
47
47
48
48
49
49
50
51
51
52
52
53
54
54
54

Exporting Files with QuickTime Pro

About Video and Audio Compression
Exporting Files Using Presets
Customizing Export Settings
Customizing Video Export Settings
Adding Special Effects and Filters to a QuickTime Movie
Changing Image (Frame) Size
Customizing Sound Export Settings
Preparing Movies for Internet Delivery
Preparing a Movie for Fast Start
Preparing a Movie for Real-Time Streaming
Creating Reference Movies to Optimize Web Playback
Creating Movies Optimized for iPhone and Web Delivery
Exporting MPEG-4 Files
MPEG-4 Video Export Options
MPEG-4 Audio Export Options
MPEG-4 Streaming Export Options
Exporting 3G Files
3G File Format Export Options
3G Video Export Options
3G Audio Export Options
3G Text Options
3G Streaming Options
3G Advanced Options

Appendix

55
55
56
57
58

Shortcuts and Tips

QuickTime Player Keyboard Shortcuts
QuickTime Pro Keyboard Shortcuts
Automating QuickTime Player with AppleScript
Automating QuickTime Player on Windows

Glossary

59

Index

62

Contents

Want to play movies from your hard disk or the Internet?

QuickTime Player makes it easy.
What Is QuickTime?
QuickTime Player is a free multimedia player. You can use it to view many kinds of files,
including video, audio, still images, graphics, and virtual reality (VR) movies. QuickTime
supports the most popular formats on the Internet for news, sports, education, movie
trailers, and other entertainment.
QuickTime is also a multimedia architecture that other applications can leverage. Some
of the most popular softwaresuch as iTunes, iMovie, and Final Cut Pro from Apple, as
well as many third-party programsuses the QuickTime architecture for important
multimedia functions. These applications require QuickTime to be installed in order to
function properly.

What Is QuickTime Pro?

You can easily add a host of useful features to your QuickTime software by purchasing
QuickTime Pro. With QuickTime Pro, you can:
Save files from the Internet
Edit audio and video
Record audio (Mac OS X and Windows) and video (Mac OS X only)
Add special effects
Create slideshows
Convert and save video, audio, and images to more than a hundred standard formats
For information about how to start using QuickTime Pro, see Getting QuickTime Pro
on page 23.

Preface

Welcome to QuickTime

Whats New in QuickTime 7?

Both the free QuickTime Player and QuickTime Pro provide a host of new features.

New in QuickTime Player

H.264 video support. This state-of-the-art, standards-based codec delivers
exceptional-quality video at the lowest data rate possible, across data rates ranging
from 3G to HD and beyond.
Live resize. Playback continues smoothly as you change the size of the QuickTime
Player window. (Some hardware requirements may apply.)
Zero-configuration streaming. You no longer need to set your Internet connection
speed in QuickTime Preferences. QuickTime automatically determines the best
connection speed for your computer. If a connection is lost during streaming,
QuickTime automatically reconnects to the server.
Surround sound. QuickTime Player can now play up to 24 channels of audio. With
QuickTime 7, your Mac, and surround speakers, you can enjoy the full effect of your
surround sound movie or game.
New and improved playback controls. Use the new A/V Controls window to adjust
settings for the best viewing experience. Easily change settings including jog shuttle,
playback speed, bass, treble, and balance.
All-new content guide. The all-new QuickTime Content Guide provides the latest in
entertainment on the Internet.
Full-screen playback. Get the most out of your display by using every pixel possible.
Thee new modes allow you fit the content to any size screen.
Floating controls. Full-screen mode now provides floating DVD-like controls for easy
access to functions like pause, play, fast-forward, rewind, and full-screen options.
Move your mouse and the full-screen controller appears on the screen for several
seconds.
Additional keyboard shortcuts. QuickTime Player now supports the same transport
control keyboard shortcuts as Final Cut Pro. While viewing a movie, press J, K, or L to
rewind, pause, or resume playback at variable speeds.
Closed Captioning. An option in QuickTime Player Preferences allows you to display
standard CEA-608 closed captions, when theyre available in your movies.
Timecode Display. QuickTime Player now allows you to switch between displaying
movie time, timecode, and frame count. You can also jump to a specific timecode or
frame number using the keyboard.
Spotlight-friendly media. With Mac OS X v10.4 or later, you can use Spotlight to
easily find your QuickTime content. Spotlight can search for movie attributes such as
artist, copyright, codec, and so on.
Screen reader compatibility. Using VoiceOver, included with Mac OS X v10.4 or later,
visually impaired users can enjoy QuickTime Player features.

Preface Welcome to QuickTime

 Easy access to QuickTime Pro. When you use the free QuickTime Player, features
available only in QuickTime Pro display Pro by their name. If you choose one of
these items, youll see a definition of the feature and learn how to purchase
QuickTime Pro. (To purchase QuickTime Pro, you must be connected to the Internet
using the computer on which you want to install the software.)

New in QuickTime Pro

QuickTime 7 Pro users enjoy not only all the great features in QuickTime Player, but also
the following new QuickTime Pro capabilities:
Create H.264 video. Use this codec for all your video encoding needs. Create
content ranging in size from HD (high definition) to 3G (for mobile devices), and
everything in between.
Create surround audio. Create a rich multimedia experience for your customers by
adding multi-channel audio to your movie. If some of your customers dont have
surround speakers, dont worry; QuickTime automatically mixes the audio to work
with the speaker setup of each user.
Improved movie authoring. Editing tasks are much easier with new hot keys for in
and out points. In addition, the Movie Properties interface has been completely
redesigned to facilitate simple and efficient movie authoring.
New AAC constant-quality mode. Create AAC audio files optimized for constant
quality rather than a constant bit rate for a consistently high-quality listening
experience.
3G streaming. Create 3G files for RTSP streaming that are fully interoperable with
other 3G streaming handsets and delivery architectures.
Conform to Aperture. View a movies aperture mode, and choose to have the movie
conform to new aperture settings, including pixel shape.
Deinterlace source video. When exporting with the Movie to QuickTime Movie
option, you can now deinterlace the video by setting an option in Export Size
settings.
Export to Apple TV, iPod, and iPhone. New presets allow you to easily export your
movies in formats optimized for use with Apple TV, iPod, and iPhone.
Export for Web. Automatically creates versions of a movie that are optimized for
both web and iPhone delivery, a reference movie that automatically selects the
appropriate version for playback, and an HTML snippet file that you can use to
embed the movie on a web page.
Concurrent exports. Export multiple files simultaneouslyand continue with your
next playback or editing task.
New for Mac OS X
In addition to the capabilities above, QuickTime Pro for Mac OS X provides these
capabilities:
Video recording. With a digital video camera connected to your Mac, you can
quickly create video postcards to share with family and friends.
8

Preface Welcome to QuickTime

 Movie sharing. Easily create a movie file for sending via email or posting to a
website.
Automator integration. With Mac OS X v10.4 Tiger or later, employ the easy-to-use
interface of Automator for streamlining your QuickTime workflow. QuickTime 7 Pro
users have exclusive access to a set of QuickTime-based Automator actions for easily
automating such tasks as starting and stopping captures, hinting movies, enabling
tracks, and more. With Automator and QuickTime 7 Pro, you can also create your own
personal set of QuickTime-based Automator actions.
Podcast sharing. With Mac OS X v10.5 Leopard, you can easily send a movie file to
Podcast Producer, on a computer with Mac OS X Server v10.5 Leopard, for automatic
creation and delivery of podcasts.

System Requirements
For Mac OS computers:
A 400 MHz or faster G3 PowerPCbased or Intel-based Macintosh computer
At least 128 MB of RAM
Mac OS X version 10.3.9 or later
For Windows computers:
A Pentium processorbased PC or compatible computer
At least 128 MB of RAM
Windows XP Service Pack 2 or Windows Vista

Types of Files QuickTime Supports

You can open (import) dozens of types of media with QuickTime. Some of the formats
you can open in QuickTime include the following:
Video formats: MOV, MPEG-1, MPEG-2,1 MPEG-4, 3GPP, 3GPP2, JPEG, DV,
Motion JPEG, AVI, MQV, H.264
Audio formats: AIFF/AIFC, Audio CD, CAF, MOV, MP3, MPEG-4, AU, WAV, iTunes audio
Still-image formats: BMP, GIF, JPEG/JFIF, JPEG 2000, PDF, MacPaint, PICT, PNG,
Photoshop (including layers), SGI, Targa, FlashPix (including layers), TIFF (including
layers)
Animation formats: Animated GIF, FLC, Flash, PICS
Other formats: KAR (Karaoke), MIDI, QuickDraw GX, QuickTime Image File,
QuickTime VR, Text

1. MPEG-2

playback is available via the QuickTime MPEG-2 Playback Component, sold separately at the Apple Store
online. Because some file formats can contain many different kinds of audio and video, QuickTime may not be able
to play all audio and video formats within a particular file format.

Preface Welcome to QuickTime

For a complete list of supported formats, see the Products area of the QuickTime
website.
To determine if QuickTime Player can open a file, choose File > Open File and select the
file you want to open. You will be able to select only files that can be imported.

Checking for New Versions of QuickTime

From time to time, Apple releases new versions of QuickTime. If youre connected to
the Internet while using QuickTime Player, youll be notified when theres a newer
version of QuickTime available. Its a good idea to have the latest version of the
software installed on your computer.
To check for a new version of QuickTime (if you are using Mac OS X), choose QuickTime
Player > Update Existing Software. In Windows, choose Edit > Preferences > QuickTime
Preferences, and then choose Update Check.

Using Onscreen Help

While QuickTime is open, you can see instructions for performing tasks by choosing
Help > QuickTime Player Help.

Where to Go for Additional Information

Consult the resources listed below for more information about QuickTime:
Latest QuickTime content listings. QuickTime Player includes an up-to-the-minute
guide to the best in QuickTime content. You can view the latest news, entertainment,
educational features, and more. You can also listen to audio programs. To view the
content guide, open QuickTime Player and choose Window > Show Content Guide.
You can also visit www.apple.com/quicktime.
QuickTime News. For the latest news about QuickTime content and products, sign
up for the QuickTime newsletter at applenews.lists.apple.com/subscribe.
Tutorials and tips. For step-by-step tutorials and a collection of instructional books
and CDs, visit www.apple.com/quicktime/resources.
Discussion lists. Sign up with one of the many QuickTime-specific discussion lists to
post messages, exchange ideas and information, and keep current with the latest
QuickTime developments at www.apple.com/quicktime/resources.
Developer support. If youre interested in developing products using QuickTime, go
to developer.apple.com/quicktime.
Technical support. To view all the support resources available, visit
www.apple.com/support.

10

Preface Welcome to QuickTime

Using QuickTime Player

This chapter explains the basics of using

QuickTime Player.
Opening and Playing Files
You can open and play QuickTime movies in QuickTime Player or in your web browser.

Opening and Playing Movies in QuickTime Player

You can use QuickTime Player to play media stored on your computers hard disk, a CD,
a DVD, or the Internet.
To open a movie on your hard disk, a CD, or a DVD, do one of the following:
In the Finder (or Windows Explorer), double-click the file or drag it to the QuickTime
Player application icon.
Choose File > Open and select the file.
Drag the file to the QuickTime Player icon in the Dock (Mac OS X only).
To open a movie on the Internet, open QuickTime Player, choose File > Open URL, and
enter the URL (the Internet address) for the movie file.

When audio is
detected, youll
see activity in
the equalizer.

Playhead
Volume

Drag to resize
the window.
Go to
beginning;
rewind

Fast-forward; go to end
Play/Pause

11

QuickTime Player has onscreen controls similar to those found on CD players and DVD
players. Use the controls to play, pause, rewind, fast-forward, jump to the beginning or
end, and adjust the volume of a QuickTime movie. You can also use the controls to
move forward or backward in a movie.
To go to a specific point in the movie, drag the playhead (the small black triangle) in
the timeline. To step through frame-by-frame, first click the small black triangle and
then press the Right or Left Arrow keys on your keyboard.
Some movies have chapter lists you can use to jump to a specific point in a movie. If a
movie has a chapter list, a pop-up menu appears between the timeline and the
equalizer.
Choose a chapter from
the pop-up menu to
jump to that chapter.

You can drag the handle in the lower-right corner of the window to resize the viewing
space.

Opening and Playing Files in a Web Browser

With the QuickTime plug-in (part of the free QuickTime software), you can play most
multimedia you encounter on the Internet within your web browser. On some
websites, movies play automatically. On other sites, you need to click an image of the
movie or a play button.
When a movie plays on a webpage, you typically see controls you can use to play,
pause, fast-forward, rewind, and adjust the volume of the movie.

The playhead
Volume

QuickTime Pro menu

Play/Pause

Rewind; fast-forward

To play a movie in a web browser, go to the website and follow the sites instructions to
watch the movie.

12

Chapter 1 Using QuickTime Player

With QuickTime Pro, you also have the option of saving the movie to your hard disk (if
the author of the movie allows it). To save a movie from the web, click the downwardpointing arrow on the right and choose Save as QuickTime Movie or Save as Source
from the QuickTime Pro menu. If the movie is a Real-Time Streaming Protocol (RTSP)
movie, it is saved as a small reference movie that points to the actual movie on the
Internet.
The QuickTime website has a number of QuickTime movies (including the latest movie
trailers) that you can view in your web browser. Go to www.apple.com/quicktime.
Adjusting Playback Preferences for Internet Movies
When you watch movies on the Internet, they start playing automatically. You can,
however, download entire movies to your hard disk before they start playing so that
you can watch the movies at your convenience.
To download movies before they start playing (in Mac OS X):
1 Choose QuickTime Player > QuickTime Preferences and click Browser.
2 Deselect Play movies automatically.
To download movies before they start playing (in Windows):
1 Choose Edit > Preferences > QuickTime Preferences.
2 Choose Browser.
3 Deselect Play movies automatically.
So that you dont have to download movies and images each time you view them on a
website, QuickTime can save these files in a storage area called a cache. If you view a
movie or image more than once, having the item cached improves performance. To
have QuickTime cache movies and images you view on the Internet, select Save
movies in disk cache. You might not want to select this option if you don't have
sufficient free space on your hard disk to allocate a cache, or if, for security reasons, you
don't want movie data stored in a cache file.
You can specify how big to make the cache by changing the Movie Cache Size setting.
How big you make the cache depends on how much free space your hard disk has. A
larger cache can hold more files (or larger files), but it takes up more space on your
hard disk.
After the QuickTime cache fills all the space reserved for it, older items are
automatically deleted from the cache when new items are added. To clear the cache,
click Empty Download Cache (in Windows, choose Download Cache in QuickTime
Settings and then click Empty Cache Now). You might want to clear the cache for
security or privacy reasons, or to recover free space on your hard disk.

Chapter 1 Using QuickTime Player

13

QuickTime automatically detects your Internet connection speed so that you get the
highest-quality QuickTime content that your Internet connection can support. If movies
youre watching on the Internet dont play properly, however, it may help to change the
connection speed setting.
To change the connection speed setting in Mac OS X, open QuickTime Preferences and
click Streaming. In Windows, open QuickTime Preferences and choose Connection
Speed.
QuickTime tries to play versions of the movie authored to match the connection speed
you choose. If you choose a speed slower than your actual connection speed, the
resulting movie may be smaller in size and lower in quality than your connection can
actually support.
If you choose a speed faster than your actual connection, QuickTime playback may
stutter or appear jerky because it is sending more data than your connection can
support.
If youre unsure of your connection speed, check with your Internet service provider
(ISP).
If you change your connection speed setting and later want to make QuickTime
automatically detect your speed again, choose Automatic from the Streaming Speed
pop-up menu (in Mac OS X).
To set the Internet connection speed in Windows, choose Edit > Preferences >
QuickTime Preferences, and then follow the directions above.
Instant-On
QuickTime includes Instant-On, a technology that dramatically reduces buffer (wait)
time when you view streamed video. Instant-On provides an instantaneous viewing
experience; you can navigate quickly through video as if it were on your hard disk.
To experience Instant-On, you must have a broadband connection. The responsiveness
of Instant-On is affected by available bandwidth and the size, or data rate, of the
content. It can also be affected by the codec used to compress the streaming video.
Instant-On is on by default. If you experience problems with streamed video, you can
change the wait time (drag the Play slider) or turn off Instant-On (open QuickTime
Preferences and click Streaming).
Viewing Streamed Files Behind a Firewall
QuickTime streaming chooses the best protocol (a method of communicating via the
Internet) for your needs. Typically, QuickTime streaming uses Real-Time Streaming
Protocol (RTSP) to ensure the best performance. If your network connection is
protected by a firewall, you may want to use the HTTP protocol instead.

14

Chapter 1 Using QuickTime Player

To use HTTP streaming (in Mac OS X):

1 In QuickTime Player, choose QuickTime Player > QuickTime Preferences (or open
System Preferences and click QuickTime).
2 Click Advanced.
3 Choose Custom from the Transport Setup pop-up menu.
4 Choose HTTP from the Transport Protocol pop-up menu.
To use HTTP streaming (in Windows):
1 In QuickTime Player, choose Edit > Preferences > QuickTime Preferences.
2 Choose Advanced.
3 Choose Custom from the Transport Setup pop-up menu.
4 Choose HTTP from the Transport Protocol pop-up menu.
If QuickTime can configure itself for your firewall, you can now watch streaming
QuickTime movies. If you still experience problems, contact your network administrator
or see the information on the Apple QuickTime website (www.apple.com/quicktime).
Setting QuickTime to Handle More or Fewer File Types (MIME Settings)
When files are downloaded over the Internet, each file is assigned a MIME type to
indicate what kind of file it is. Your browser keeps track of which plug-in should be
used to display each kind of file.
QuickTime can display a wide variety of file types. To make QuickTime handle more or
fewer file types, you can edit the MIME type settings. If you edit the list, you can return
to the default list by following the instructions below and clicking Use Defaults.
To edit MIME settings in Mac OS X, open QuickTime Preferences and click Advanced. In
Windows, choose Edit > Preferences > QuickTime Preferences, choose Browser, and
click MIME Settings.

Viewing QuickTime Virtual Reality (QTVR) Movies

QTVR movies display three-dimensional places (panoramas) and objects with which the
user can interact. With a QTVR panorama, its as if youre standing in the scene and you
can look around you up to 360 degrees in any direction. In a QTVR movie of an object,
you can rotate the object in any direction.
To pan through a QTVR movie, drag the cursor through the scene. To zoom in or out,
click the + or button. (If the buttons are not showing, zoom in by pressing Shift; zoom
out by pressing Control.)

Chapter 1 Using QuickTime Player

15

Some QTVR movies have hot spots that take you from one scene (or node) to another.
As you move the mouse over a hot spot, the cursor changes to an arrow. To see all the
places where you can jump from one node in a scene to another, click the Show Hot
Spot button (an arrow with a question mark in it). A translucent blue outline of any hot
spots within the currently visible VR scene appears. (If there are no hot spots, clicking
this button has no effect.) Click a hot spot to jump to a new scene.
To step backward scene by scene, click the Back button. (The Back button appears only
on QTVR movie windows, not in all QuickTime movie windows.)

Viewing Still Images

You can view still images in QuickTime Player. Choose File > Open File and select the
file, or drag the file to the QuickTime Player icon in the Dock (Mac OS X only).
Mac OS X: You can use Preview to convert a still image to other formats (Preview is in
the Applications folder on your hard disk). You can also convert many kinds of files
using QuickTime Pro. For more information, see Converting Files into QuickTime
Movies on page 28.
Windows: If you have QuickTime Pro, you can use PictureViewer to import and export
various types of still image file formats and to rotate images. PictureViewer is in the
QuickTime folder on your hard disk.

Playing MIDI Files

QuickTime Player can import MIDI (Karaoke MIDI, Standard MIDI, and General MIDI)
formats. To open a MIDI file, choose File > Open File and select the file.
QuickTime uses its built-in synthesizer to play MIDI files. You can also set QuickTime to
use an external synthesizer instead of the built-in one.
To specify a different synthesizer (in Mac OS X):
1 Open System Preferences, click QuickTime, and then click Advanced.
2 Choose the synthesizer you want from the Default Synthesizer pop-up menu.
To specify a different synthesizer (in Windows):
1 Choose Edit > Preferences > QuickTime Preferences.
2 Click Audio.
3 Select the synthesizer you want from the Default Music Synthesizer pop-up menu.

16

Chapter 1 Using QuickTime Player

Opening Recently Used Files

You can easily open recently used files.
To open recently used files:
m Choose File > Open Recent > [option]
To change the number of items that appear in the Open Recent submenu (in
Mac OS X), choose QuickTime Player > Preferences, click General, and choose an option
from the Number of Recent Items pop-up menu. In Windows, choose Edit >
Preferences > Player Preferences.

Finding Movies Quickly Using QuickTime Favorites

You can easily find and open movies by putting pointers to them in your QuickTime
Favorites window. To view your list of favorites, choose Window > Favorites > Show
Favorites.
To add a movie to the Favorites list:
1 Open the movie in QuickTime Player.
2 Choose Window > Favorites > Add Movie As Favorite.
You can also drag a file to the Favorites list window.
To rearrange movies in the list, drag them. To delete an item from the list, drag the item
to the Trash or select the item and press the Delete key. (In Windows, drag the item to
the Recycle Bin or select the item and press the Backspace key.) Deleting an item from
the Favorites list does not delete the file from your hard disk (or wherever the file is
saved).

Playing Copy-Protected Movies

QuickTime movies can be encrypted so that only authorized viewers can watch them.
Such movies are known as secured media files. To use such a file, you must enter a
media key, which is usually available from the media file provider.
To enter a media key (in Mac OS X):
1 Open System Preferences, click QuickTime, and click Advanced.
2 Click Media Keys.
3 Click the Add button and then enter the key provided by the author or vendor.
To enter a media key (in Windows):
1 Choose Edit > Preferences > QuickTime Preferences.
2 Click Advanced.
3 Click Media Keys.
4 Click Add and then enter the key provided by the author or vendor.

Chapter 1 Using QuickTime Player

17

Viewing Information About a File

QuickTime Player can display information about a QuickTime file, such as its
compression format, size, and frame rate while playing.
To view information about a file:
1 Open the file.
2 Choose Window > Show Movie Info.
With QuickTime Pro, you can see additional information about a movie by choosing
Window > Show Movie Properties. For more information about movie properties, see
Changing Movie Properties on page 38.

Controlling Playback
You can change playback options such as balance, playback speed, the size at which a
movie plays, and whether the QuickTime Player window shows. You can also optimize
movies for playback on certain computers.

Adjusting Audio and Video Settings

For any QuickTime movie with an audio track, you can adjust the right/left balance, as
well as the volume, bass, and treble levels. For any movie, you can also set playback
options such as speed and playback rate (the jog shuttle).
To set audio and video controls:
1 Choose Window > Show A/V Controls.
2 Drag a slider to adjust the setting.
Other playback options (for playing several movies at once or for playing a movie while
using another application, for example) are available in QuickTime Player Preferences.
To open QuickTime Player Preferences (in Mac OS X), choose QuickTime Player >
Preferences. In Windows, choose Edit > Preferences > Player Preferences. For more
information, see Changing Playback Preferences.

Changing Playback Preferences

You can change playback preferences by choosing QuickTime Player > Preferences. The
available options include:
Open movies in new players: Select to open movies in a new player window;
deselect to replace the movie in the current player window with the new movie.
Automatically play movies when opened: Select to make all movies start playing
when theyre opened; deselect to have the movie start when you click the Play
button.
Use high-quality video settings when available: When this option is selected, video
looks sharper and smoother, but more processor capacity is used.

18

Chapter 1 Using QuickTime Player

 Play sound in frontmost player only: Select to play the audio for only one
QuickTime Player window (the active window); deselect to play the sound of all
playing movies simultaneously.
Play sound when application is in background: Select to play audio even if
QuickTime is not the frontmost application; deselect to mute the audio when
QuickTime is not the active application.
Show equalizer: Select or deselect to show or hide the equalizer (which shows the
presence of audio) in the QuickTime Player window.
Show Content Guide automatically: Select to see the latest content listings when
QuickTime Player first opens (unless you open a specific movie file).
Pause movie before switching users: Select to automatically pause a movie when
you use fast user switching to let another person use your computer.
Hide selection indicators for empty selection: Select to have the selection
indicators in the timeline removed when no frames are selected.
Show closed captioning when available: Select to see the closed caption
information, if captions have been provided by the movies creators.
With QuickTime Pro, more options are available. For information about them, see
Getting QuickTime Pro on page 23.

Viewing Movies at Full Screen

You can set the screen so that only the movie is visible, not the QuickTime Player
window, desktop, or other windows. This presentation setting is called full-screen
mode. (You can also set a movie to play at half size, double size, or other sizes.)
To play a movie at full screen, do one of the following:
Choose View > Full Screen.
Choose View > Present Movie, choose Full Screen, and click Play.
To quit full-screen mode, press Esc. To adjust the way the picture is sized to fit your
screen, such as stretched to fit or in letterbox format, move the pointer to the top of
the screen to display the QuickTime Player menu options, and then choose a setting
from the View menu. The following additional options are available in full-screen mode:
Fit to Screen: The content is scaled to fill your screen as fully as possible without
cropping the movie or changing the aspect ratio.
Zoom: The content is scaled and cropped to completely fill your screen in at least
one dimension. This can eliminate black areas on the top (letterboxing) or side
(pillarboxing) but may hide or distort the content.
Panoramic: The content is scaled to fit your screen and the outer horizontal edges
compressed to avoid cropping the image.
You can also cycle through all of the available full-screen options by clicking the button
in the movie controls that appear when you move the pointer.
Chapter 1 Using QuickTime Player

19

You can also set options for all movies playing at full screen. For example, you can hide
the movie controls or change the amount of time theyre displayed before being
hidden. To set these options in Mac OS X, choose QuickTime Player > Preferences and
click Full Screen. To set these options in Windows, choose Edit > Preferences >
Player Preferences, and then click Full Screen.
Note: As long as Display full-screen controls is selected in QuickTime Player
Preferences, you can make hidden controls appear by moving the pointer.

Changing Movie Size for Playback

QuickTime Player includes several options for changing movie playback size.
To change a movies playback size, choose View > [a size], or drag the resize control in
the lower-right corner of the window. To stretch the movie in any direction, hold down
the Shift key when you drag (holding down the Shift key while dragging doesnt
preserve the aspect ratio).
To return the movie to its default size and aspect ratio, press Command-1 (in Windows,
press Alt-1).
You can also view movies at full screen, with additional sizing options available during
full-screen playback. For more information, see Viewing Movies at Full Screen on
page 19.

Looping a Movie
You can play a movie repeatedly. When the movie finishes, it automatically starts
playing again.
To loop a movie:
m Choose View > Loop.
With QuickTime Pro, you can also play the movie forward and then backward
repeatedly by choosing View > Loop Back and Forth.

Simultaneously Playing Multiple Movies

You can have more than one QuickTime Player window open at a time.
To open more than one QuickTime Player window, do one of the following:
Double-click another movie file.
Choose View > Play All Movies.
By default, when you have more than one QuickTime Player window open, the audio
plays only on the active (frontmost) QuickTime Player window. For information about
changing this setting, see Changing Playback Preferences on page 18.

20

Chapter 1 Using QuickTime Player

Using Frame Number and Time Codes

When youre viewing a movie in QuickTime Player, you can display the current movie
time or frame number, or the SMPTE time code if the movie has a time code track.
(Some applications, such as Final Cut Pro, automatically add a time code during
capture.)
Displaying Frame Numbers, Movie Time, or Time Code
The area next to the timeline in QuickTime Player displays the time information for the
current movie.
1 Click the time display area.
2 Choose an option from the pop-up menu that appears:
Standard: Displays movie time in HH:MM:SS format.
Time Code: Displays the movies time code in HH:MM:SS:Frame format. Either the
time code or drop-frame time code will be displayed, depending on the frames per
second of the movie. A colon in the frame segment of the time notation indicates
that a non-drop time code is being displayed. A semicolon indicates a drop-frame
time code. If the movie has a time code track, it will be used. Otherwise, the time
code will be calculated from 00:00:00:00 at the start of the movie.
Frame Number: Displays the frame number, incrementing from 0 at the start of the
movie. An f in the time display area indicates that the frame count is being
displayed.

Navigating a Movie by Frame Number or Time Code

You can jump to a point in a movie by entering a specific frame number or time code.
Double-click the time display, and then press the arrow keys or type a new time or
frame number.
To select the entire time display, double-click the area, or click the area and then
press Command-A (in Mac OS X) or Control-A (in Windows).
To enter a time, separate each unit with a period. For example, 5.02.10 will go to five
minutes, two seconds, and 10 frames. To go to five minutes, zero seconds, and 10
frames you can enter 5..10.

Chapter 1 Using QuickTime Player

21

Finding Text in a Text Track

Some movies contain text such as titles, credits, subtitles, or section headings. You can
search for text in a movie so that, for example, you can find specific frames in the
movie.
To search for text in a QuickTime movie:
1 Choose Edit > Find > Find.
If this command is unavailable, the movie does not have a text track.
2 In the Find dialog, type the text you are looking for and click Next.

Preventing Users from Changing QuickTime Settings

If youre using a computer in a public setting (at a kiosk, for example), you can prevent
users from changing QuickTime settings and saving movies from the Internet.
To set up QuickTime for use on a public computer (in Mac OS X):
1 Open System Preferences, click QuickTime, and click Advanced.
2 Select Enable kiosk mode.
To set up QuickTime for use on a public computer (in Windows):
1 Choose Edit > Preferences > QuickTime Preferences.
2 Choose Browser Plug-in.
3 Select Enable kiosk mode.

Viewing Movies that have Flash Content

Some QuickTime movies contain a Flash track . To enable these movies to play properly,
you must turn on support for Flash within QuickTime.
To enable Flash playback in QuickTime movies (in Mac OS X):
1 Open System Preferences, click QuickTime, and click Advanced.
2 Select Enable Flash.
To enable Flash playback in QuickTime movies (in Windows):
1 Choose Edit > Preferences > QuickTime Preferences.
2 Choose Advanced.
3 Select Enable Flash.

22

Chapter 1 Using QuickTime Player

Getting Started
with QuickTime Pro

Learn how to use the advanced playback options in

QuickTime Pro, create movie postcards, and share them
via email or the web.
Getting QuickTime Pro
To get QuickTime Pro, choose a QuickTime Pro menu item and click Buy Now, or choose
QuickTime Player > Buy QuickTime Pro.
You must be connected to the Internet using the computer on which you want
QuickTime Pro installed. You may need to restart QuickTime Player to make the new
options available.

Using Advanced Playback Options

With QuickTime Pro, you have additional options for playing movies, such as playing a
movie on a second display, and more.

Playing a Movie on a Second Display

With QuickTime Pro and a two-display setup with dual display support, you can play a
movie on one display while working in another application on the other display. This
arrangement is useful for presentations.
Mac OS X: Make sure Mirror Displays is not selected. (Open System Preferences, click
Displays, and click Arrangement. If you dont see an Arrangement button, your
computer does not support this feature.)
Windows: Whether you can play a movie on a second display depends on your
computer and monitor. Open the Display control panel, click Settings, and make sure
that the second display is enabled. If it is not enabled, click it and make sure Extend
my Windows desktop onto this monitor is selected.

23

To play a movie on a second display:

1 Open a movie in QuickTime Player.
2 Choose View > Present Movie.
The two displays are shown side by side; one contains the menu bar. The letter Q
appears on the display on which the movie will play. To play the movie on the other
display, click it.
3 Choose an option from the pop-up menu.
To play the movie without displaying the QuickTime Player controls, choose Full Screen.
4 Select Movie or Slideshow mode.
In slideshow mode, you can advance frames by clicking the mouse or pressing the
Right Arrow or Left Arrow key.
5 Click Play.
You can open other applications while the movie is playing. To make another
application active, press Command-Tab (in Windows, Alt-Tab). You can now use the
mouse and keyboard in other applications while the movie continues to play.
To stop the movie before it ends, press Command-Tab (in Windows, Alt-Tab) to make
QuickTime Player active, and then click the mouse.
All QuickTime movie playback keyboard shortcuts are available in full-screen mode.

Presenting a Movie as a Slideshow

In a slideshow, the viewer clicks to advance to the next frame. With QuickTime Pro, you
can set a movie to play as a slideshow.
To play a movie as a slideshow:
1 Choose View > Present Movie.
2 Click Slideshow, then click Play.
3 To advance the slideshow, click the mouse or press the Left or Right Arrow keys.

Changing the Color Around a Movie

By default, the onscreen area around the edge of a movie playing in full-screen mode is
black, but you can change it to another color.
To change a movies border color:
1 Choose View > Present Movie.
2 Click the color well to the right of the pop-up menu, then choose a color from the
Colors window.
If you have more than one display, you can have this color appear on all displays (not
just the one playing the movie), by selecting Display background color on all screens.

24

Chapter 2 Getting Started with QuickTime Pro

Loading Movies into RAM for Better Playback

QuickTime has two memory (RAM) options you can use to improve playback
performance. Preload puts the entire movie into memory before it is played; Cache
keeps movie data in memory after it has played. This option is useful for small files you
want to loop.
With QuickTime Pro, you can adjust memory options for a QuickTime movie track.
To adjust memory options for a track:
1 Choose Window > Show Movie Properties.
2 Select the track you want to adjust and click Other Settings.
3 To put the track into memory, select Preload this track.
4 To keep track data in memory, select Cache.
Use these options only with tracks that contain very small amounts of data; too much
data in memory may cause poor performance, system errors, or unpredictable results.

Creating Movies and Other Media

With QuickTime Pro, you can create movies in various ways.

Recording Video and Audio

With a video camera and a Macintosh computer you can use QuickTime Pro to record a
movie. QuickTime Pro can capture video from most FireWire-equipped sources,
including the Apple iSight, DV cameras, and some webcams. With a Macintosh or
Windows computer, you can also record audio using a built-in or external microphone.
To record audio or video with QuickTime Pro:
1 Connect the camera or microphone to the computer (unless you are using a built-in
microphone).
2 In QuickTime Pro, choose File > New Movie Recording (or File > New Audio Recording).
A preview window appears, which you can use to adjust settings such as camera
position, lighting, and audio level before you start recording.
3 To start recording, click the Record button at the bottom of the window.
4 To stop recording, click the button again.
The movie you just recorded appears in a QuickTime movie window. By default, the
movie is saved on the desktop, but you can choose a different default location in the
Recording pane of QuickTime Player Preferences. To see where the movie has been
saved, Command-click the icon at the top of the window.

Chapter 2 Getting Started with QuickTime Pro

25

Setting Recording Options

When you first use QuickTime Pro to record video or audio, settings are automatically
chosen for you. If you want, you can change settings such as which recording device
and format to use, and where recorded movies are stored.
To change recording options:
1 Choose QuickTime Player > Preferences.
2 Click Recording (or Audio Recording in Windows).
3 Choose the desired options for your video source, microphone, and quality, and then
choose a default location to store recorded files.

About Saving Movies

With QuickTime Pro, you can create and edit movies, and then save them. When you
choose File > Save As, you can save the movie as one of the following:
A self-contained movie includes all the data (video, audio, and so on) you used to
create the movie within a single file.
A reference movie contains pointers to other movies (or parts of movies) stored
elsewhere, such as in different folders on your hard disk or even on a web server.
Pointers to other movies are created when, for example, you copy and paste part of
a movie from one movie into another.
If you are concerned about free space on your hard disk and can be sure your
source movies wont change location, you can save your movie as a reference
movie; the media you copy and paste is stored as a space-saving pointer to that
media, rather than being stored entirely inside your new movie file.
When you play a reference movie, QuickTime follows the pointers to access and
play the other movies (or parts of movies). To determine whether a movie contains
pointers to other data, choose Window > Show Movie Properties, select the movie
at the top of the window, and click Resources. If the file containing the movie does
not appear in the list, then the movie has pointers and is not self-contained. In Mac
OS X, you can Command-click the icon to see the name and location of the file that
contains the movie.
The term reference movie is also used for the files you can create to intelligently
deliver different-sized streams to different users depending on their connection
speeds. For more information, see Creating Reference Movies to Optimize Web
Playback on page 48.

26

Chapter 2 Getting Started with QuickTime Pro

Saving Movies from the Internet

With QuickTime Pro, you can save (download) a movie viewed in your web browser to
your hard disk. (The movie must be authored to allow for saving.) If its a streaming
movie, QuickTime Pro saves a small reference movie that points to the stream.
To save an Internet movie on your hard disk:
1 When the movie finishes loading (when the entire progress bar is filled with gray), click
the down arrow in the playback controls.
2 Choose Save as QuickTime Movie.
If this command is not available, the movie is authored so that it cannot be saved.

Creating a Slideshow or Animation from Still Images

With QuickTime Pro, you can combine a series of still images to create a movie that
plays like a slideshow. This process is an easy way to share the pictures from your
digital camera or mobile phone.
Note: Slideshows look best when all the images are the same size.
To create a slideshow from still images:
1 Put all the graphic files you want to include in a folder.
2 Name each file with the same name followed by an increasing number; for example,
picture1, picture2.
Most digital cameras number files automatically. The numbers must be increasing but
dont have to be precisely sequential (for example, you could name the files picture1,
picture5, picture10, and so on).
3 In QuickTime Player, choose File > Open Image Sequence, and then select the first file.
4 Choose a frame rate (the number of frames displayed per second) from the Frame Rate
pop-up menu.
Slideshows usually work best when slides are shown at 2 to 3 seconds per frame.
QuickTime Pro creates the movie, which shows each picture in sequence.
5 Choose File > Save to name and save the movie.

Chapter 2 Getting Started with QuickTime Pro

27

You can add music to your slideshow by adding an audio track to your movie before
saving it. Open an audio file, select the portion you want to add to the slideshow, and
choose Edit > Copy. Select the slideshow (or a portion of it) and choose Edit > Select
All, then choose Edit > Add to Selection and Scale. The audio is sped up or slowed
down to fit the length of the paste destination (the pitch remains the same). For best
results, make the slideshow length match that of the audio as closely as possible. You
can also lengthen a soundtrack by adding multiple audio files to the movie, each
beginning at a different point.
Alternatively, you can keep the original audio speed and alter the image speed by
opening a new player window, copying and pasting the audio into the new window,
and then copying the slideshow and pasting it into the new window by choosing
Edit > Add to Selection and Scale.
If youre using Mac OS X: You can also use the recording feature in QuickTime Pro to
narrate your slideshow. See Recording Video and Audio on page 25.

Creating a Still Image from a Movie

With QuickTime Pro, you can export a single frame from a movie as an image file.
To save a still image from a movie:
1 Move the playhead to the frame you want to export.
2 Choose File > Export.
3 Choose Movie to Picture from the Export pop-up menu.
4 Click Options and choose a format from the Compression type pop-up menu.
To export every frame from the movie as a series of images, choose Movie to Image
Sequence. Exporting every frame can generate a very large number of files; you may
want to export to a folder rather than to the desktop.

Converting Files into QuickTime Movies

If you have QuickTime Pro, you can use QuickTime Player to convert many types of
video, audio, graphics, and animation files (including Flash files) into QuickTime movies.
To convert a file into a QuickTime movie, open it in QuickTime Player and then choose
File > Save.

28

Chapter 2 Getting Started with QuickTime Pro

Sharing Movies by Email or the Web

With QuickTime Pro and Mac OS X its easy to create movies that are just right for
sharing with others by email or on your .Mac HomePage. Simply select how you want
to share your movie, and QuickTime Pro automatically creates a file suitable for that
delivery method. (To use the Share feature to put your movie on the web, you need a
.Mac account.)
To share a movie:
1 Choose File > Share.
2 Click Email or HomePage.
3 Choose a name and size for the movie.
4 If you are going to publish your movie on the web, you can type a name for the movie
(the name you type will appear on the webpage).
5 Click Share.
While the movie is being exported, you can click the x to cancel the export if
necessary.
If you click Email, a new message window opens in Mail, with your movie attached. If
you click HomePage, your browser opens to the specified webpage, with the movie
embedded. Send the URL to friends so that they can view the movie.

Sharing Movies for Podcast Producer

With QuickTime Pro and Mac OS X, you can create a movie for use with Podcast
Producer, an application included with Mac OS X Server v10.5 Leopard.
Note: This option is available only if you have the Podcast Capture application installed
on your computer.
To share a movie to Podcast Producer:
1 Choose File > Share.
2 Click Podcast Producer.
3 Enter your user name, password, and server name, then click Login.
4 Choose a Podcast Producer workflow from the pop-up menu.
See the Podcast Producer Administration Guide, or your network administrator, for
information about these settings.
5 Click Share.

Chapter 2 Getting Started with QuickTime Pro

29

Editing and Authoring

with QuickTime Pro

Learn how to use QuickTime Pro to edit movies,

manipulate movie tracks, and much more.
Simple Editing
With QuickTime Pro, you can perform movie-editing tasks.

Selecting and Playing Part of a Movie

To perform editing functions such as Copy and Delete, in most cases you need to first
select the desired portion of a movie. (If you dont select anything, the edit commands
work on the current frame.)
To select a portion of a movie, move the In and Out selection markers. The darkened
area between the two markers indicates the selected portion. To fine-tune the
selection, select a marker and move it with the arrow keys. You can also move the
playhead and press I (for In) or O (for Out) to set the start or end point of the selection,
even while the movie is playing.
The playhead

In and Out markers,

showing the selected
portion of the movie

Tip: To move the In or Out marker

to a different position, drag the
playhead to the desired position
(or use the arrow keys), then press
I or O.

To play the selection, choose View > Play Selection Only (so that the checkmark
appears), then click Play. To play the whole movie, choose View > Play Selection again
(to remove the checkmark).
With QuickTime Pro, you can save the movie (choose File > Save) so that the next time
it is opened, only the part you selected plays.

30

Note: By default, the selection markers hide when nothing is selected, making it easy
to determine whether or not a frame is selected. To turn off this option so that the
selection markers appear even when nothing is selected, change the Hide selection
indicators for empty selection option in QuickTime Player preferences.

Cutting, Copying, or Deleting a Section of a Movie

Selecting and moving, copying, or deleting (trimming) part of a movie is easy in
QuickTime Pro.
To cut, copy, or delete part of a movie:
1 Move the playhead until the desired frame appears, or select the part of the movie you
want to modify (use the In and Out selection markers and the arrow keys).
2 Choose Edit > Copy, Cut, or Delete.
If you choose Copy or Cut, you can paste the selection elsewhere.
3 Position the playhead where you want to paste the selection and choose Edit > Paste.
QuickTime Pro inserts the selection you pasted at the position of the playhead.
You can also delete all parts of a movie that are not selected by choosing Edit > Trim
to Selection.
Note: After you delete parts of a movie, the file size stays the same until you choose
File > Save As and select Save as a self-contained movie.

Combining Two QuickTime Movies into One

With QuickTime Pro, you can easily add one movie to another to make one longer
movie.
To combine two movies:
1 In QuickTime Player, choose Edit > Select All to select the entire contents of the first
movie.
2 Choose Edit > Copy, then open the second movie.
3 Move the playhead to the point at which you want to insert the movie (usually the very
beginning or end of the original movie), and choose Edit > Paste.
4 Choose File > Save As to name and save the new movie.

Chapter 3 Editing and Authoring with QuickTime Pro

31

Working with Tracks

A QuickTime movie is made up of one or more tracks. Each track stores a particular
kind of data. For example, a QuickTime movie could have a video track, music tracks,
and sound effects tracks.
With QuickTime Pro, you can edit tracks individually. You can move tracks from one
movie to another, turn a track on or off, delete tracks, or modify the information
contained in a track.
Audio narration
Video 1
Video 2
Audio sound effects
Text title
Text credits

Turning Tracks On or Off

With QuickTime Pro, you can choose one or more tracks to enable or disable. For
example, you might want to turn off tracks to simplify editing, or to hide a track in a
final movie. When you export a movie, only enabled tracks are exported.
To turn movie tracks on or off:
1 In QuickTime Player, choose Window > Show Movie Properties.
The movies tracks appear in the list at the top of the Properties window.
2 Use the Enable checkboxes to turn tracks on (selected) or off (deselected).
To delete a track, drag it to the Trash, or select it and click Delete,.You can also choose
Edit > Cut, or press the Delete key.
Note: For audio tracks, other options are available by clicking Audio Settings. To play
only the audio in the selected track, select Solo. To play the movie without audio, select
Mute.

Extracting, Adding, and Moving Tracks

With QuickTime Pro, you can create a new movie from one or more tracks of an existing
movie, while leaving the original movie file intact. For example, you could create a
movie that uses only the audio from an existing movie. To do so, you extract the
desired tracks.
You can also add the extracted track to an existing movie.

32

Chapter 3 Editing and Authoring with QuickTime Pro

To extract a track (and add it to another movie):

1 Choose Window > Show Movie Properties.
2 Select the desired track or tracks and click Extract.
You can select more than one track by holding down the Shift key when you click.
QuickTime creates a new movie containing the extracted tracks.
3 To add the extracted track to another movie, select the movie (or the portion of it you
want your pasted media to fit into) and choose Edit > Add to Movie.
When you add a track to a movie, the tracks duration is unaltered. For example, if you
add a 10-second sound track to a 1-minute movie, the sound track plays for 10 seconds,
starting at the position in the movie where you added the track.
To scale a track so that it stretches or compresses to a particular length, drag the In
and Out markers of the target movie to select the duration you want the new track to
cover and then choose Edit > Add to Selection and Scale in step 3. Scaling audio may
change the speed of the audio (although the pitch remains the same when you play
the movie in QuickTime Player). You could add video to sound instead, and speed up or
slow down the video to match the audio. You might have better results if you compare
the timelines of the two tracks and cut from one or the other until they have the same
duration.

Working with Audio Tracks

QuickTime audio includes music tracks, which contain MIDI or other data, and sound
tracks, which contain digitized audio.
Adding an Audio Track to a QuickTime Movie
You can easily add audio and other tracks to a QuickTime movie.
To add an audio track to a movie:
1 In QuickTime Player, choose File > Open File and select the audio file you want to
import.
2 In the QuickTime Player window that opens, choose Edit > Select All to select the entire
audio file, then choose Edit > Copy.
3 Open the movie to which you want to add the audio.
4 To add the audio to the whole movie, choose Edit > Add. To add the audio to a part of
the movie, select a part and choose Edit > Add to Selection and Scale.
Add to Selection and Scale slows down or speeds up the audio track to fit the length
of the selected part of the movie; the pitch remains the same (when you play the
movie in QuickTime Player). You could add video to sound instead, and speed up or
slow down the video to match the audio. You might have better results if you compare
the timelines of the two tracks and cut from one or the other until they have the same
duration.

Chapter 3 Editing and Authoring with QuickTime Pro

33

Note: If your audio and video are created by the same device, such as a DV camera,
and are created at the same time, the audio and video will be synchronized.
Changing Sound Track Volume Levels and Other Audio Settings
With QuickTime Pro, you can change the volume and balance of audio and music
tracks. For example, if a movie has more than one audio track, you can adjust the
volume of the tracks relative to one another. You can also change the bass and treble
levels.
To change settings for an audio track:
1 In QuickTime Player, choose Window > Show Movie Properties.
2 In the Properties window, select the audio track and click Audio Settings.
3 Drag the sliders to adjust the settings.
4 Use the pop-up menu to the right of each audio channel to specify where the channels
sound should be directed.
To direct a channel's sound to the subwoofer, choose LFE Screen. To specify a particular
output for the audio device, choose one of the Discrete options. To silence a channel,
choose Unused.
5 To turn off the audio (without having to delete the track), select Mute. To play only the
selected audio track, select Solo.
6 To save the balance and channel settings with your movie, choose File > Save or
Save As.

Presenting Multiple Movies in the Same Window

With QuickTime Pro, you can place multiple video tracks in the same window to play
movies side by side or to create a picture-in-picture effect.
To present multiple movies in the same window:
1 In QuickTime Player, choose Edit > Select All to select the entire contents of the first
movie.
2 Choose Edit > Copy, then open the second movie.
3 Move the playhead to the point at which you want the first movie to begin playing
(usually the beginning or end of the original movie), and choose Edit > Add to Movie.
4 Choose Window > Show Movie Properties, select the new video track, and click Visual
Settings.
5 Use the Current Size and Layer controls to set the new video to a desired size and layer
(layers with lower numbers are farther forward, or more on top).
For example, for a picture-within-a-picture effect, with the added movie inside the
original movie, make the new movie smaller and assign it a lower layer number.

34

Chapter 3 Editing and Authoring with QuickTime Pro

Pasting Graphics and Text into a Movie

With QuickTime Pro, you can paste graphics and text into a QuickTime movie.
If a pasted graphic is larger than the movies dimensions, QuickTime Pro resizes the
movie to fit the dimensions of the graphic. For best results, size graphics (using a
graphics program) to match the movie size before you insert them. You can export a
single frame from the movie to use as a guide for text placement. (See Creating a Still
Image from a Movie on page 28.)
To find a movies dimensions, choose Window > Show Movie Properties, select the
video track, and click Visual Settings.
To add graphics or text:
1 Copy the text or graphic to the Clipboard.
2 In QuickTime Player, move the playhead to the point at which you want the copied
item to appear.
3 Choose Edit > Paste.
This procedure inserts the graphic into the movie at the Paste location, in its own
frame. To paste the graphic onto the frame at the Paste location, choose Edit >Add to
Movie.
To make a graphic show up in more than one frame, select the portion of the movie
you want to add it to and choose Edit > Add to Selection and Scale. You can use this
technique to add a company logo throughout a movie. (Also see Changing a Tracks
Transparency on page 39.)

Working with Text Tracks

You can add text to a QuickTime movie to create titles, credits, and subtitles. With
QuickTime Pro, text tracks are searchable, so you can use keywords to find precise
frames in the movie. The following topics provide details about adding text tracks.
Adding a Text Track to a QuickTime Movie
With QuickTime Pro, you can import a text file into a QuickTime movie.
To add a text track:
1 Create a text file containing the text you want in the movie, and save the file as text
only (.txt).
Separate each paragraph with a return character. Each paragraph appears in a separate
frame of the movie. By default, each text frame is displayed for 2 seconds.
2 In QuickTime Player, choose File > Open File and select the text file.
3 Click Open.

Chapter 3 Editing and Authoring with QuickTime Pro

35

Overlaying a Movie with Text

With QuickTime Pro, you can use QuickTime Player to overlay (superimpose) text on a
specific part of an existing movie.
To overlay text:
1 In QuickTime Player, choose File > Open File and then select the text file.
2 Choose Edit > Select All and then choose Edit > Copy. (In Windows, click Options,
select the Keyed Text checkbox, and copy the track).
3 Select the part of the movie on which you want to overlay the text.
4 Choose Edit > Add to Selection and Scale.
5 Save as a self-contained movie.
The text appears throughout the part of the movie you selected. For information about
adjusting how long each line of text displays, see Setting the Frame Duration of a Text
Track on page 36.
Specifying Font Styles for Text Tracks
With QuickTime Pro you can change the font attributes of a text track already in a
movie. To do so, you export the track, make changes, then reimport the track.
To change font styles for the text track:
1 In QuickTime Player, choose File > Export.
2 Choose Text to Text from the Export pop-up menu.
3 Click Options and select Show Text, Descriptors, and Time.
4 Use a text editor to alter the values after the {QTtext} tag.
5 Import the text track back into your movie.
In Windows, click Convert. To import the text with the default settings, click Save. To
select different settings (such as font attributes), click Options.
You can also insert tags throughout the text to change values while the movie plays.
Setting the Frame Duration of a Text Track
With QuickTime Pro, you can set the duration of each frame in an existing text track to
a value other than 2 seconds. To do so, you export the track, make changes, then
reimport the track.
To change the current text frame information:
1 In QuickTime Player, choose File > Export and choose Text to Text from the Export
pop-up menu.
2 Click Options and select Show Text, Descriptors, and Time.
3 Edit the information in the text file and then import the track back into the movie.

36

Chapter 3 Editing and Authoring with QuickTime Pro

The duration for each line of text in the text file appears on a separate line before the
line of text. The time you type is the length of time after the movie has started at which
this line of text will appear.
Timestamps are specified as hours:minutes:seconds:fractions of a second (the default
Text to Text export setting is 1/600th of a second). For example, if you enter the time
00:02:11:00, the text on the following line appears at 2 minutes and 11 seconds into
the movie.
For information about the other text track descriptors, see the developer section of the
QuickTime website at www.apple.com/quicktime.

Specifying Languages for Individual Tracks

With QuickTime Pro, you can create a movie with support for multiple languages by
specifying a language for an individual track. For example, you can create a movie that
contains a separate audio track for each language. QuickTime automatically plays the
correct track, based on the language setting of the users computer.
To specify languages:
1 Create or assemble the alternate tracks.
Record voiceovers in each desired language or create text tracks to use as subtitles.
Save each alternate track as a self-contained movie, and put all the alternates together
in a single folder.
2 Put a copy of your original movie, self-contained and minus any tracks that are now
stored as alternates, in the folder with the alternates.
3 Open the movie and choose Window > Show Movie Properties.
4 In the Properties window, select a sound or text track and click Other Settings.
5 Choose the language of this track from the Language pop-up menu.
6 Choose a track to use when a different language is selected from the Alternate pop-up
menu.
7 Save as a self-contained movie (choose Edit > Save As and make sure Make movie selfcontained is selected).
8 Repeat these steps for additional language tracks; each time, choose the previously
selected language from the Alternate pop-up menu.

Chapter 3 Editing and Authoring with QuickTime Pro

37

Changing Movie Properties

The following sections describe how to resize or rotate a movie, set a movies poster
frame, and more.

Adding Annotations to a Movie

With QuickTime Pro, you can add annotations to document information about the
movie, such as its author, director, and copyright information. You can annotate the
entire movie and any of its individual tracks.
To annotate a movie:
1 In QuickTime Player, choose Window > Show Movie Properties.
2 Select an item from the list and click Annotations.
3 Choose an annotation to add from the Add Annotation pop-up menu.
4 Enter the annotation in the Value column of the list.
Users who dont have QuickTime Pro see only three of the annotations the movie
contains. (Which three appear depends on which annotations the movie contains.)

Resizing, Flipping, or Rotating a Movie

With QuickTime Pro, you can change the size and orientation of a video track of a
movie.
To resize or rotate a QuickTime movie:
1 In QuickTime Player, choose Window > Show Movie Properties.
2 In the Properties window, select a video track and click Visual Settings.
3 To resize the movie, type new numbers in the Current Size fields.
To keep the same height-to-width proportions, select Preserve Aspect Ratio.
4 To rotate the movie, click one of the rotate buttons.
Flip horizontal
or vertical

Rotate right or left

To restore the movie to its original appearance, click Reset.

38

Chapter 3 Editing and Authoring with QuickTime Pro

Changing a Movies Shape with a Video Mask

With QuickTime Pro, you can change the shape of a movie from rectangular to other
shapes using a video mask. In combination with a media skin; you can skin a movie so
that it plays in a non-rectangular region (for example, a movie could play from within a
ship porthole), and then use a mask to restrict the movies shape to the desired
playback region.
Use a graphics program to create the mask and save it as a QuickTime-compatible file
(for example, BMP, GIF, JPEG, or PICT). The mask should be a black shape on a white
background. The movie appears through the black shape.
To add a video mask:
1 In QuickTime Player, choose Window > Show Movie Properties.
2 Select the video track you want to assign the mask to, then click Visual Settings.
3 Drag the mask file to the Mask well in the Properties window, or click Choose to select
the file.

Changing a Tracks Transparency

With QuickTime Pro, you can create a track that is partly transparent. This technique is
useful, for example, for overlaying a movie with a logo.
To change a tracks transparency:
1 Add the track to the movie. (See Extracting, Adding, and Moving Tracks on page 32.)
2 Choose Window > Show Movie Properties.
3 Select the track and click Visual Settings.
4 Choose Blend from the Transparency pop-up menu and drag the Transparency Level
slider.

Creating a Chapter List for a Movie

With QuickTime Pro, you can create a pop-up chapter list to navigate to specific points
in a movie. First you create a list of topics (or entry points), and then you import the list
into the movie as a text track. When you play the movie in QuickTime Player, the
current chapter displays in the movie controller. (See Opening and Playing Movies in
QuickTime Player on page 11.)
To create a chapter list:
1 In a text editor or word processor, type your list of chapters and save the document as
plain text.
Make each item very short (preferably one word but no more than two or three words)
and separate each item with a return character.
2 In QuickTime Player, choose File > Open File, select the text file, and click Open.

Chapter 3 Editing and Authoring with QuickTime Pro

39

3 Choose File > Export. In the Export pop-up menu, choose Text to Text. In the Use
pop-up menu, choose Text with Descriptors.
4 Click Options. In the Text Export Settings dialog, select Show Text, Descriptors, and
Time; select Show time relative to start of Movie; and set fractions of seconds to 1/30
(the default is 1/1000).
5 Click OK, then click Save to create a text file with descriptors.
6 Open the exported list in your text editor or word processor, and open the target
movie in QuickTime Player.
7 Choose Window > Show Movie Info.
8 In QuickTime Player, drag the playhead on the timeline to find the first point in the
movie where you want to begin a new chapter.
Use the Right and Left Arrow keys to step forward or backward a frame at a time as
needed. Note the current time in the Properties window.
9 In the text file, find the first chapter title and change the timestamp just before that
chapter title to the time you noted in the Properties window.
The timestamp might now read, for example, [00:01:30.15], meaning that selecting the
first chapter title will jump the viewer 1 minute, 30 seconds, and 15 frames into the
movie.
10 Repeat steps 9 through 11 until youve identified all the places in the movie that
correspond to the chapter divisions and youve entered the proper timestamps in the
text file.
11 Change the last timestamp (the one after the last chapter title in the text file) to match
the duration of the movie.
12 Save the text file and import it into QuickTime Player.
QuickTime creates a new movie with just a text track.
13 Choose Edit > Select All, choose Edit > Copy, and close the movie.
14 Click in the main movie, choose Edit > Select All, and then choose Edit > Add to
Movie.
QuickTime adds the text track to the movie.
15 Choose Window > Show Movie Properties.
16 In the Properties window, select the video or audio track you want to associate with
the chapter track, and click Other Settings.
17 Choose the main video or audio track from the Chapters pop-up menu.
If you have a movie with alternate subtitle or sound tracks, you can create multiple
chapter lists in different languages and set the appropriate subtitle or sound track as
the owner of each chapter list. The chapter list will change to match the selected
language.

40

Chapter 3 Editing and Authoring with QuickTime Pro

18 Select the text track, then select Preload this track (to make the chapter track load
first).
19 Deselect the new text track so that it doesnt display on top of the video.
The new track will still function as a chapter track.
20 Save the movie as a self-contained movie.
You can now choose a chapter title from the pop-up menu to the right of the timeline.

Setting a Movies Poster Frame

A poster frame is a still image of a movie that represents the movie in places like the
QuickTime Player Favorites window and the Finder. The default poster frame is the first
frame in the movie. With QuickTime Pro, you can change the poster frame.
To change a movies poster frame:
1 In QuickTime Player, drag the playhead (or use the arrow keys to move the playhead) to
the desired frame.
2 Choose View > Set Poster Frame.
To view a movies poster frame, choose View > Go to Poster Frame.

Saving a Movie with Specific Playback Settings

With QuickTime Pro, you can specify how a movie should open and play, what happens
when the movie finishes, and the method QuickTime uses to resize the video.
To specify playback options:
1 Choose Window > Show Movie Properties.
2 Select the movie name, and then click Presentation.
3 Select the desired options.
4 Save the movie.

Changing the Movie Controller Type

With QuickTime Pro, you can specify the kind of playback controls available on the
QuickTime Player window. For a QTVR movie, for example, you can save the movie with
one of the QTVR movie controllers.
To specify a movie controller type:
1 Choose Window > Show Movie Properties.
2 Select Movie and click Presentation.
3 Choose an option from the Movie Controller Type pop-up menu.
4 Save the movie.

Chapter 3 Editing and Authoring with QuickTime Pro

41

Exporting Files
with QuickTime Pro

If you want more control over how QuickTime creates

a file, use the Export feature of QuickTime Pro.
With QuickTime Pro, you can export a movie to a number of different file formats, such
as QuickTime movie (MOV), MPEG-4, 3GPP, 3GPP2, AVI, and DV. In addition, you can
export an audio track to several different audio formats, export the individual frames of
a movie as separate image files, or export a text track to a text file.
To see the list of file formats available for a movie open in QuickTime Player, choose
File > Export and browse the list of file format choices in the Export pop-up menu.

About Video and Audio Compression

Because uncompressed video and audio require a lot of disk space to store and a lot of
bandwidth (the rate at which data can be transferred) to deliver, youll want to
compress (encode) your movie before sending it to another computer or on the web.
Movies are usually compressed (encoded) as part of the export process.

42

Exporting Files Using Presets

QuickTime Pro offers a myriad of settings and options for compressing video and audio
during export. To help simplify the process of compressing and exporting,
QuickTime Pro also offers export presets. Different presets are available for each file
format.
To export a movie using presets:
1 In QuickTime Player, open the movie you wish to export.
2 Choose File > Export.
3 Choose a file format from the Export pop-up menu.
4 Choose the preset that best meets your needs from the Use pop-up menu.
For example, to export a movie for use with a video-capable iPod, choose Movie to
iPod. To export a movie that is optimized for Apple TV, choose Movie to Apple TV.
You can also create movies for iPhone by choosing one of the Movie to iPhone
options.
5 Choose a filename and location, and click Save.
Note: To use the same settings you used during the last export, choose Most Recent
Settings from the Use pop-up menu.

Customizing Export Settings

For the greatest possible control when compressing and exporting media files, use the
export options available in QuickTime Pro.
For video compression and export, QuickTime Pro offers customizable settings in three
categories: video settings, filters (also known as special effects), and image size.
QuickTime Pro also offers many options for customizing compression settings for
sound.
The following topics provide information about which options to choose when
exporting and compressing movies.

Customizing Video Export Settings

To customize video settings for export:
1 Choose File > Export.
2 Choose a file format from the Export pop-up menu. For the options discussed below,
choose Movie to QuickTime Movie.
3 Click Options.

Chapter 4 Exporting Files with QuickTime Pro

43

4 In the Video area of the Movie Settings dialog, click Settings, and then choose your
settings.
Compression type: Choose the video compressor (codec) you want to use to
compress your video. For the highest quality at the lowest data rate (or the smallest
file), H.264 is recommended.
Data rate (bit rate): In general, the higher the data rate, the better the quality, but
the bigger the file. In most cases, youll want to set a data rate based on the way your
movie will be viewed. For example, for streaming to Internet dialup connections, limit
the data rate to around 45 kilobits per second to leave room for network traffic. If the
file will be downloaded for playback, the data rate can be higher (a 56K modem user,
however, has longer to wait before playback begins). The data rate of a movie is also
affected by other compression options you set, such as the frame rate. To let the
compressor choose an appropriate data rate, select Automatic.
Optimized for: Choose your intended delivery method from the Optimized for
pop-up menu. This setting informs the codec how much the data rate can vary
above and below the data rate you choose. This option is available only for
compressors that can apply limits, such as H.264.
Key frame options: Many compressors use frame differencing to compress moving
images. Frame differencing is the process of determining what information has
changed from a starting frame (called a key frame) to subsequent frames. The key
frame contains all of the information for an image. Subsequent frames contain only
the information that has changed.
Depending on the compressor you use, you can specify how often you want key
frames to occur. If you dont have enough key frames, the quality of your movie
might be lower because most frames are generated from others. However, more key
frames result in a larger movie with a higher data rate. With some compressors, an
additional key frame is inserted automatically if too much of the image has changed
from one frame to the next. A good rule of thumb for general use is to have one key
frame every 5 seconds (multiply the frames per second by 5). If you are creating a file
for RTSP streaming and have concerns about the reliability of the delivery network
(as with the public Internet), you may want to increase key frame frequency to one
key frame every 1 or 2 seconds. To let the compressor choose the key frame interval,
select Automatic.
Frame rate: Frame rate is the number of individual images shown every second.
Standard (NTSC) video has a frame rate of 29.97 frames per second (fps), and the
standard for film is 24 fps. The European standard (PAL) is 25 fps. QuickTime movies
are sometimes created with a slower frame rate to reduce bandwidth and CPU
requirements.

44

Chapter 4 Exporting Files with QuickTime Pro

Movies with higher frame rates show motion better but have larger file sizes. If you
choose a frame rate thats lower than the movies current frame rate, frames will be
deleted. If you choose a number thats higher than the movies current frame rate,
existing frames will be duplicated (not recommended, since it increases file size
without improving quality). When choosing a frame rate, use a simple fraction of
your current frame rate, such as 1/2, 1/3, and so on. For example, if your current
frame rate is 30 (29.97), use 15 or 10.
Other options: Some compressors or codecs offer options specific to the codec.
After you select a compressor (codec), any special options appear.

Adding Special Effects and Filters to a QuickTime Movie

With QuickTime Pro, you can add special effects such as blur, emboss, and film noise to
a movie before you export it. You add special effects by using filters.
To set a filter for a movie:
1 In QuickTime Player, choose File > Export.
2 Choose Movie to QuickTime Movie from the Export pop-up menu.
3 Click Options, click Filter, and select the filter and settings you want to use.
The selected filter is applied to the entire movie.

Changing Image (Frame) Size

With QuickTime Pro, you can change the size of a movies video frame. For example, if
your movie will be viewed on a small screen (such as a mobile device), you can change
the movies dimensions to match the target device. You can experiment with making
the frame size smaller for a given data rate to get better encoding results.
To change the size of a movies video frame:
1 Choose File > Export.
2 Choose a file format from the Export pop-up menu.
3 Click Options.
4 In the Video area of the Movie Settings dialog, click Size and then choose an option:
Use current size: This option (the default) keeps the exported movies image size the
same as your original source movie.
Use custom size: When you choose this option, you can specify (in pixels) a height
and width for the exported movies image size. For best results, choose dimensions
smaller than your source movie, and keep the height-to-width ratio the same as the
source (so that objects dont appear distorted).

Chapter 4 Exporting Files with QuickTime Pro

45

Customizing Sound Export Settings

To customize sound settings for export:
1 Choose File > Export.
2 Choose Movie to QuickTime Movie from the Export pop-up menu.
3 Click Options.
4 In the Sound area of the Movie Settings dialog, click Settings and then choose your
options:
Format: Choose the compressor (codec) you want to use for compressing sound. For
general use and Internet delivery of music, MPEG-4 Audio (AAC) is recommended.
Channels: Choose between mono (1 channel) or stereo (2 channels).
Rate: Digitized sound is made up of sound samples. The more samples per second,
the higher the sound quality. To maintain quality, music requires a higher sampling
rate than spoken voice because music uses a wider range of frequencies. Audio CDs
use a sampling rate of 44.1 kHz.
Render Settings: Choose the quality of the signal processing that will be used;
higher quality settings take longer to process.
Other options: To see any additional options specific to your chosen codec, click the
Options button. if its available.

Preparing Movies for Internet Delivery

With QuickTime Pro, you can create movies so that they can be delivered over the
Internet. You can deliver a movie over the Internet in two ways:
With HTTP download, the movie is downloaded to the clients hard disk. Fast Start is
a QuickTime feature that enables users to watch or listen to media as it is being
downloaded (long before the whole movie has been downloaded) from a standard
web server to their hard disks. Fast Start works well for short-form movies where file
size is limited. It ensures high-quality playback regardless of users Internet
connection speeds, although those with slower connections will wait longer before
media starts to play.
Real-time streaming provided by QuickTime Streaming Server (QTSS) delivers media
in real time over the Internet, from modem rates to broadband. No file is ever
downloaded to a viewers hard disk. Media is played, but not stored, by the client
software as it is delivered. You would choose real-time streaming rather than Fast
Start for webcasts of live events in real time, delivery of long-form video, 24/7
Internet radio and TV channels, and other cases in which you dont files stored on a
users hard disk. QTSS uses the RTSP protocol.

46

Chapter 4 Exporting Files with QuickTime Pro

Preparing a Movie for Fast Start

With QuickTime Pro, you can set up a movie to start playing from a web server before
the movie has completely downloaded to the users hard disk. This is called a Fast
Start movie.
Set the Fast Start setting just before you distribute your movie; making other changes
and resaving may undo the Fast Start setting.
If the movie is in the format you want, you can set it up for Fast Start by choosing
File > Save As and then selecting Save as a self-contained movie. If the movie is not
in the format you want, you need to encode it first by following the steps below.
To convert a movie and set it up for Fast Start:
1 In QuickTime Player, choose File > Export.
2 Choose Movie to QuickTime Movie from the Export pop-up menu.
3 Click Options and select video and sound compression options appropriate for web
delivery.
For more information, see Customizing Video Export Settings on page 43,
Customizing Sound Export Settings on page 46, and the tutorials at
www.apple.com/quicktime/resources.
4 Make sure the Prepare for Internet Streaming checkbox is selected and Fast Start
appears in the pop-up menu.

Preparing a Movie for Real-Time Streaming

With QuickTime Pro, you can set up a movie to be streamed over the Internet. To do so,
you should compress the movie so that its data rate is appropriate for the bandwidth at
which your users will connect.
Hinted streaming format is for use with QuickTime Streaming Server or Darwin
Streaming Server. When you choose hinted streaming, hint tracks (information
needed to stream the movie) are added to the movie. If the movie is already in the
desired format, you can prepare a movie for streaming by choosing File > Export and
then choosing Movie to Hinted Movie. If you want to change the movies format,
follow the steps below.
To set up a movie for Internet streaming:
1 In QuickTime Player, choose File > Export.
2 Choose Movie to QuickTime Movie from the Export pop-up menu.
3 Choose a streaming option from the Use pop-up menu.
4 Click Options and select the Prepare for Internet Streaming checkbox.
5 Choose Hinted Streaming from the pop-up menu.

Chapter 4 Exporting Files with QuickTime Pro

47

If you want to stream a QuickTime movie using QuickTime Streaming Server, you
should use a web-optimized video or audio compressor to compress the movie file. All
QuickTime compressors are compatible with QuickTime Streaming Server, but the
compressors listed here are optimized to give the best results for delivery over the
Internet. For a complete list of compressors that QuickTime supports, see the Products
area of the QuickTime website (www.apple.com/quicktime/products).
Video compressors: H.264, MPEG-4, Sorenson Video (any version), H.263, H.261
Audio compressors: AAC, QUALCOMM PureVoice, AMR, QDesign
For more information about preparing a movie for streaming, go to
www.apple.com/quicktime/resources.

Creating Reference Movies to Optimize Web Playback

You can use reference movies to provide the appropriate movie for different users
connection speeds. For example, you can have a smaller movie streamed to users
connected over a standard modem, and a larger version of the movie streamed to
users connected over a broadband connection.
Apple provides a free tool, MakeRefMovie X, that greatly simplifies the process of
creating reference movies. You can download this software at:
developer.apple.com/quicktime/quicktimeintro/tools
For more information about reference movies see Creating Movies Optimized for
iPhone and Web Delivery on page 48

Creating Movies Optimized for iPhone and Web Delivery

With QuickTime Pro you can easily create versions of your movie that are optimized for
iPhone and desktop viewing. This saves you several steps in creating movies for online
distribution and ensures that your audience automatically receives the best viewing
experience for the device theyre using.
To export for iPhone and web delivery:
1 Choose File > Export for Web.
2 In the dialog that appears, specify a filename and select a location for the exported
movies and HTML snippet file.
3 Select the versions you want to create.
iPhone: Creates a movie that is optimized for delivery to iPhone over a Wi-Fi
connection.
iPhone (cellular): Creates a move that is optimized for delivery to iPhone over a
cellular (EDGE) connection.
Desktop: Creates a movie optimized for delivery to computers over broadband
connections.

48

Chapter 4 Exporting Files with QuickTime Pro

4 Choose a poster frame option for the movie.

The poster frame determines the still image viewers will see when they load the web
page with the embedded reference movie. If you want to set a new poster frame
before exporting the versions, click Cancel. Then navigate to the frame you want to use
and choose View > Set Poster Frame.
5 Click Export to create the files necessary for the options you selected.
The exporting process creates several files, including files for each version of the movie
you select, a reference movie that will automatically deliver the correct version to the
viewer, and an HTML file that contains a snippet of code you can use to embed the
movie in a web page. All of these files must be copied to your web server, in the same
location relative to each other and with the same file names, in order for the reference
movie and HTML snippet to function correctly.

Exporting MPEG-4 Files

MPEG-4 is the latest worldwide industry standard for delivering professional-quality
audio and video over a wide range of bandwidths, from mobile multimedia to high
definition. When you want to create a file that will work with another MPEG-4 device,
use QuickTime Pro to create MPEG-4 content by exporting a movie.
To export a file to the MPEG-4 format:
1 Open the movie you want to export in QuickTime Player, then choose File > Export.
2 Choose Movie to MPEG-4 from the Export pop-up menu.
Note: To create an MPEG-4 movie that is optimized for use with Apple TV, iPhone, or
iPod, select Movie to Apple TV , Movie to iPhone, or Movie to iPod from the Export
pop-up menu. All of the MPEG-4 options will be set to the appropriate values for you.
To adjust settings such as file format, compression, and distribution restrictions, click
Options. The options you choose depend on the network over which youll deliver the
file and the viewers connection. The following sections describe the options in detail.

MPEG-4 Video Export Options

When you export a movie to MPEG-4 format (by choosing File > Export and then
choosing Movie to MPEG-4), you access the following options by clicking Options and
then clicking Video.
File Format: To ensure operability with devices made by ISMA members, choose
MP4 (ISMA). For more information, go to www.isma.tv.

Chapter 4 Exporting Files with QuickTime Pro

49

 Video Format: Choose the video compressor (codec) you want to use to compress
your video. For the highest quality at the lowest data rate (or the smallest file), H.264
is recommended. If you need the file to play on a device that supports MPEG-4 video,
choose MPEG-4 Basic or MPEG-4 Improved, depending on the target device. If your
source movies video track is already compressed, you can choose Pass through so
that the video doesnt get compressed again.
Data Rate: The more kilobits per second (kbps), the better the movie quality. For
best playback, however, dont choose a data rate higher than the available
bandwidth.
Optimized for: If you choose H.264 from the Video Format pop-up menu, choose
your intended delivery method from the Optimized for pop-up menu. This setting
tells the codec how much the data rate can vary above and below the data rate you
choose.
Image Size: Current maintains the source material size. To choose a size not listed in
the pop-up menu, choose Custom.
Preserve Aspect Ratio Using: If you are changing the image size, use this option to
specify an option in case the movie needs to be scaled to the new dimensions.
Letterbox will scale the source proportionally to fit into the clean aperture, adding
black bars to the top and bottom or sides as necessary. Crop centers, scales, and
trims to the clean aperture. Fit Within Dimensions adjusts to the destination size by
fitting to the longest side, scaling if necessary.
Frame Rate: In most cases, your video will look better if you choose a number that is
exactly divisible by the FPS (frames per second) of your source. For example, if your
source is captured at 30 FPS, choose a frame rate of 10 or 15. Dont choose a rate
larger than that of your source material.
Key Frame: The more often you specify a key frame (the lower the number), the
better the video quality, but the bigger the file.
If you choose MP4 from the File Format pop-up menu and H.264 from the Video
Format pop-up menu, and then click Video Options, you get the following additional
options:
Restrict Profile(s) to: If you need the file to play on a device that conforms to one or
more of the standards profiles, check those profiles here.
Encoding Mode: Choose whether you want the best quality or faster encoding.

MPEG-4 Audio Export Options

When you export a movie to MPEG-4 format (by choosing File > Export and then
choosing Movie to MPEG-4), you access the following options by clicking Options and
then clicking Audio.
Audio Format: Choose your audio compressor (codec) here. If your source movie has
only one audio track and it is already compressed, you can choose Pass through so
that the audio doesnt get compressed again.

50

Chapter 4 Exporting Files with QuickTime Pro

 Data Rate: As with video, the more kilobits per second, the better the audio quality.
Channels: Choose between mono (1 channel) or stereo (2 channels).
Output Sample Rate: Available only with AAC audio. Its best to match the sample
rate to that of the target device.
Encoding Quality: Available only with AAC audio. The Good setting is optimized for
the highest-speed encoding, for higher-quality, choose Best for 16-bit audio, or Better
if your audio source is 24-bit.

MPEG-4 Streaming Export Options

When you export a movie to MPEG-4 format (by choosing File > Export and then
choosing Movie to MPEG-4), you access the following options by clicking Options and
then clicking Streaming.
If youre going to deliver the exported file using RTSP streaming, select Enable
streaming.
Streamed data must be sent in smaller-size packets. Some networks have limitations on
packet size and packet duration. If your network provider gives you information about
size limitations, you can change the packet size and the maximum packet duration to
comply with your delivery network. Otherwise, use the default values.

Exporting 3G Files
QuickTime Player can import and play back files for use on 3G networkshigh-speed
mobile networks that enable multimedia to be sent between mobile devices.
QuickTime supports standards for nearly any kind of 3G mobile network.
To import a 3G file, choose File > Open File and then select the file. You can also open a
3G file in QuickTime by dragging it to the QuickTime icon in the Dock or doubleclicking the file (Mac OS X only).
With QuickTime Pro, you can export video, audio, and text to one of the many 3G
formats that QuickTime supports.
To export a file to the 3G format:
1 Open the movie you want to export in QuickTime Player, then choose File > Export.
2 Choose Movie to 3G from the Export pop-up menu.
To adjust settings such as file format, compression, and distribution restrictions, click
Options. The options you choose depend on the mobile network over which youll
deliver the file and the capabilities of the viewers phone. The following sections
describe the options in detail.

Chapter 4 Exporting Files with QuickTime Pro

51

3G File Format Export Options

After you choose File > Export and click Options, the first two items in the File Format
pop-up menu are the standard formats.
3GPP is for GSM networks. With this format, you can use:
MPEG-4, H.263, or H.264 video
AAC or AMR audio
3G timed text
3GPP2 is for CDMA 2000 networks. With this format, you can use:
MPEG-4, H.263, or H.264 video
AAC, AMR, or QCELP audio
3G timed text
Movie fragments (enables playback to start sooner for longer movies, since only
the fragment, not the whole movie, must fit on the handset)
The remaining formats are provided for specific networks. With these formats, you can
restrict distribution so that a file cant be shared from the recipients phone (set this
option in the Advanced pane). These formats may limit the acceptable file size or data
rate; check with the service provider for more information.
3GPP (Mobile MP4) is for NTT DoCoMos i-motion 3G service. With this format, you
can use the 3GPP options described above.
3GPP2 (EZmovie) is for KDDIs 3G network service. This format provides the same
options as 3GPP2 (described above), except for AMR audio support.
AMC (EZmovie) is for KDDI subscribers with AMC-capable phones. With this format,
you can use:
MPEG-4 video
QCELP audio
KDDIs text format

3G Video Export Options

Video Format: If your source movie has only one video track and it is already
compressed, you can choose Pass through (so that the video doesnt get
compressed again).
Data Rate: The more kilobits per second (kbps), the better the movie quality. For
best playback, however, dont choose a data rate higher than the available
bandwidth.
Optimized for: If you choose H.264 from the Video Format pop-up menu, choose
your intended delivery method from the Optimized for pop-up menu. This setting
tells the codec how much the data rate can vary above and below the data rate you
choose.

52

Chapter 4 Exporting Files with QuickTime Pro

 Image Size: If youre sending the file to a mobile phone, choose one of the
standards. Current maintains the source material size; the resulting file may not play
on a mobile phone. To choose a size not listed in the pop-up menu, choose Custom.
Preserve Aspect Ratio Using: If you are changing the image size, use this option to
specify an option in case the movie needs to be scaled to the new dimensions.
Letterbox will scale the source proportionally to fit into the clean aperture, adding
black bars to the top and bottom or sides as necessary. Crop centers, scales, and
trims to the clean aperture. Fit Within Dimensions adjusts to the destination size by
fitting to the longest side, scaling if necessary.
Frame Rate: In most cases, your video will look better if you choose a number that is
exactly divisible by the FPS (frames per second) of your source. For example, if your
source is captured at 30 FPS, choose a frame rate of 10 or 15. Dont choose a rate
larger than that of your source material.
Key Frame: The more often you specify a key frame (the lower the number), the
better the video quality, but the bigger the file.
These additional options are available when you click Video Options:
Re-sync markers: Adds re-sync markers inside the video frames to help with packet
loss recovery when streaming.
Encoding Mode: With H.264 video, you can speed up the compression process (for
preview purposes, for example) by choosing Faster encode (Single-pass). With the
default option, Best quality (Multi-pass), the codec determines how many passes
are needed to compress the data for the best quality.

3G Audio Export Options

When you export a movie to 3G format (by choosing File > Export and then choosing
Movie to 3G), you access the following options by clicking Options and then clicking
Audio.
Audio Format: If your source movie has only one audio track and it is already
compressed, you can choose Pass through (so that the audio doesnt get
compressed again).
Data Rate: As with video, the more kilobits per second, the better the audio quality.
Channels: Choose between mono (1 channel) or stereo (2 channels).
Frames per sample: Available only with AMR audio, this option enables exported
audio data to be packed more efficiently.
Silence detection: Available only with AMR audio, this option detects audio portions
with low signal levels and adjusts the data rate of the output accordingly.
Output Sample Rate: Available only with AAC audio. Its best to match the sample
rate to that of the target device.
Encoding Quality: Available only with AAC audio. By choosing Best, you can get
higher-quality audio but it takes longer to encode.

Chapter 4 Exporting Files with QuickTime Pro

53

3G Text Options
When you export a movie to 3G format (by choosing File > Export and then choosing
Movie to 3G), you access the following options by clicking Options and then clicking
Text.
These options are available if your movie has a text track (credits, titles, subtitles, and so
on).
Some mobile devices cant play text in a movie. To allow the movie to play only if the
text can be displayed on the receiving device, select Require text capability on
handset. Deselect this checkbox to allow the audio and video to play even if the text
cant be displayed on the device.

3G Streaming Options
When you export a movie to 3G format (by choosing File > Export and then choosing
Movie to 3G), you access the following options by clicking Options and then clicking
Streaming.
To create a file for RTSP streaming to QuickTime Player, select Enable streaming. This
option creates a hint track (instructions necessary for streaming a file).
Optimize for server helps the server to process the file faster, but increases the file
size.

3G Advanced Options
When you export a movie to 3G format (by choosing File > Export and then choosing
Movie to 3G), you access the following options by clicking Options and then clicking
Advanced.
If your file is in Mobile MP4 or EZmovie format, you can restrict distribution so that
once the file is on a handset it cant be sent or copied anywhere else. You can specify
how many times the file can play back on the handset once downloaded, or make the
file expire after a certain number of days or on a certain date.
Fragment movie enables the file to download via HTTP in small pieces so that
playback can start faster and so that larger files can be played on the handset (only the
fragment, not the entire movie, must fit on the handset at one time).

54

Chapter 4 Exporting Files with QuickTime Pro

Appendix

Shortcuts and Tips

Learn keyboard shortcuts and other tips for using

QuickTime efficiently.
QuickTime Player Keyboard Shortcuts
QuickTime Player and QuickTime Pro provide keyboard shortcuts for most playback
options. When available, each of these shortcuts appears to the right of its associated
menu item. A few keyboard shortcuts have no menu equivalents.
For this control

Press

Play/pause

Space bar

Play or pause all movies

Command-Return

Play movie backward

Shiftdouble-click, CommandLeft Arrow

Stop playback and go back one frame

Left Arrow

Stop playback and go forward one frame

Right Arrow

Go to beginning of selection or movie

OptionLeft Arrow

Go to end of selection or movie

OptionRight Arrow

Turn volume up

Up Arrow

Turn volume down

Down Arrow

Turn volume up to maximum level

OptionUp Arrow

Turn volume down to minimum level

OptionDown Arrow

55

For this control

Press (Mac OS X)

Press (Windows)

Play/pause

Space bar

Space bar

Play or pause all movies

Command-Return

Control-Enter

Play movie backward

Shiftdouble-click
CommandLeft Arrow

Shiftdouble-click

Stop playback and go back one

frame

Left Arrow

Left Arrow

Stop playback and go forward

one frame

Right Arrow

Right Arrow

Go to beginning of selection or
movie

OptionLeft Arrow

ControlLeft Arrow

Go to end of selection or movie

OptionRight Arrow

ControlRight Arrow

Turn volume up

Up Arrow

Up Arrow

Turn volume down

Down Arrow

Down Arrow

Turn volume up to maximum

level

OptionUp Arrow

ControlUp Arrow

Turn volume down to minimum

level

OptionDown Arrow

ControlDown Arrow

QuickTime Pro Keyboard Shortcuts

56

To do this...

Press

Enter full-screen mode

Command-F

Exit full-screen mode

Command-period or Esc

Play movie at half size

Command-0

Play movie at normal size

Command-1

Play movie at double size

Command-2

Play movie at full size

Command-3

Move In marker to playhead location

Move Out marker to playhead location

Extend selection to the left

OptionShiftLeft Arrow

Extend selection to the right

OptionShiftRight Arrow

Extend selection to point clicked in LCD

Shift-click

Appendix

Shortcuts and Tips

To do this

Press (Mac OS X)

Press (Windows)

Enter full-screen mode

Command-F

Control-F

Exit full-screen mode

Command-period or Esc

Control-period or Esc

Play movie at half size

Command-0

Control-0

Play movie at normal size

Command-1

Control-1

Play movie at double size

Command-2

Control-2

Play movie at full size

Command-3

Control-3

Move In marker to playhead

location

Move Out marker to playhead

location

Extend selection to the left

OptionShiftLeft Arrow

Extend selection to the right

OptionShift
Right Arrow

Extend selection to point clicked Shift-click

in LCD

Automating QuickTime Player with AppleScript

In Mac OS X, you can use AppleScript to automate QuickTime Player functions. For
example, you can open a movie and tell it to play for a specific duration; automate the
conversion of movies from one format to another; adjust track playback properties
such as start time, volume, and layer; or adjust movie properties such as copyright and
author.
To determine all of the AppleScript commands you can use to control QuickTime
Player, install AppleScript and look at the QuickTime Player AppleScript dictionary.
1 Open Script Editor.
2 Choose File > Open Dictionary.
3 Select QuickTime Player.
Sample QuickTime Player scripts can be found on the AppleScript website
(www.apple.com/applescript/quicktime).

Appendix

Shortcuts and Tips

57

Automating QuickTime Player on Windows

In Windows, you can use JavaScript, Visual Basic, or other Active Scripting languages to
automate QuickTime Player functions. As with AppleScript on Mac OS X, you can
control movie playback, convert movies from one format to another, adjust movie and
track properties, and more.
There are three QuickTime Player objects available for use:
QuickTimePlayerApp
The application object. This object has a Players property which returns a collection
of the QuickTime Player windows. The Quit method exits the program.
QuickTimePlayers
Use this object to enumerate player windows; the Remove and Add methods permit
the removal and creation of new QuickTime Player windows.
QuickTimePlayer
This object has properties and methods to open movies, control the windows
position and appearance, and to interact with its menus. The QTControl property
returns the ActiveX control hosting the windows movie.
To examine the QuickTime Player or QuickTime Control interfaces in detail, look at the
Apple QuickTime Player Library 1.0 or Apple QuickTime Control 2.0 interfaces in a COM
object browser.

58

Appendix

Shortcuts and Tips

Glossary

Glossary

AIFF (Audio Interchange File Format) An audio file format used widely on the web.
aspect ratio The relationship between the height and width of an image.
audio channel Audio tracks can contain one or more channels of audio data. Each
channel represents the sound directed to a particular speaker. For instance, stereo
tracks contain two audio channels.
audio channel label Each audio channel may be labeled to specify where its sound
should be directed. In a stereo track, the channels are typically labeled Left and Right.
In a 5.1 surround sound track, there are labels for Left, Right, Center, Left Surround,
Right Surround, and LFE Screen (the subwoofer).
bandwidth The capacity of a network connection, measured in bits or bytes per
second (bps or Bps), for carrying data.
BMP A bitmapped graphics format used for still images in the Windows environment.
bitmapped Represented by pixels.
chapter list A list of locations in a movie. A user can choose an item from the chapter
list to go to that point in the movie.
codec From compressor/decompressor. A codec is technology for compressing and
decompressing data. Codecs can be implemented in software, hardware, or a
combination of the two. Codecs can by lossy or lossless, depending on whether data
is lost during compression.
compression The process of reducing the data size of a file.
Darwin Streaming Server A technology for delivering media over the Internet in real
time. Based on the same code as Apples QuickTime Streaming Server (QTSS), Darwin
Streaming Server is an open-source streaming server.

59

Fast Start A method of delivering a movie so that it can start playing before it is fully
downloaded.
frame A single image in a movie.
frame rate The number of frames displayed per second.
GIF (Graphics Interchange Format) A file format for images.
hint track In a streamed movie, a hint track specifies for the server how the movies
content is to be transmitted.
hot spot A place in a virtual reality movie where the user can interact with the movie
using the mouse.
Instant-On A technology that dramatically improves access to streaming content for
broadband users.
JPEG (Joint Photographic Experts Group) A standard for compressing still images.
layer In QuickTime movies, how an image is displayed depends on its layer; images
with lower layer numbers are displayed on top.
MIDI (Musical Instrument Digital Interface) A software and hardware standard set by
the music industry that enables electronic instruments to communicate with one
another and with computers.
MP3 (MPEG-1 layer 3) A format for compressing music.
MPEG-4 An ISO standard based on the QuickTime file format that defines multimedia
file and compression formats.
node In QuickTime VR, a point from which an object or panorama can be viewed.
NTSC (National Television System Committee) The organization that defines North
American broadcast standards. The term NTSC video also refers to the video standard
defined by the committee, which is 29.97 fps, 525 lines per frame, and interlaced.
PAL (Phase Alternation by Line) A video format used by many European countries and
other countries outside North America. The PAL standard is 25 fps, 625 lines per frame,
and interlaced.
PICT A Mac OS picture file format that does not apply compression to an image and
therefore maintains the same quality level from copy to copy.
pixel The onscreen dots that form text and graphics. A contraction of the words picture
and element.
plug-in Software that helps a web browser interpret certain types of media files.

60

Glossary

PNG (Portable Network Graphics) A file format for images.

poster In QuickTime, a still image, usually a single frame from a movie, used to
represent the movie to users.
protocol A set of standards for sending and receiving information on a network.
QTSS (QuickTime Streaming Server) A technology used to deliver media over the
Internet in real time.
QuickTime Player An application that opens and plays QuickTime movies, as well as
many other kinds of files.
QuickTime Pro A version of QuickTime Player with advanced features, primarily the
addition of editing capabilities.
QuickTime VR A QuickTime media type with which users can interact with threedimensional places and objects.
reference movie A file that contains the location of one or more media files. A
reference file linked from a webpage, for example, can direct a QuickTime Player to the
version encoded for a particular connection speed.
RGB Red, green, blue; a way of representing colors onscreen.
RTSP (Real-Time Streaming Protocol) A protocol for controlling a stream of real-time
multimedia content. Sources of data can include both live feeds and stored digital
video.
sprite An image that is defined once and is then animated by commands that change
its position or appearance.
streaming Delivery of video or audio data over a network in real time, in packets
instead of in a single file download.
TIFF (Tagged Image File Format) A format for graphics, commonly used to transfer
bitmapped images between applications.
track A single data type in a QuickTime movie. A movie may contain one or more
tracks.
tween track A track that modifies the display of other tracks.
virtual reality (VR) The effect achieved by QuickTime VR, where users can manipulate
objects or environments.
wav A Windows format for sound files.

Glossary

61

3G files
exporting 5153

A/V Controls 18
animations 27
annotations 38
AppleScript 57
audio
adding an audio track 33
audio controls 18, 34

balance
changing for an audio track 34
balance controls 18
bass level 18, 34
bit rate. See data rate
browser
playing movies in a 12

Cache checkbox 25
chapter lists 12, 39
color
changing a movies border 24
compressing audio and video 4253
connection speed 14
content guide 19
converting files to QuickTime 28
copy-protected movies 17
cropping movies 31

data rate 14, 44, 47, 50, 52

dimensions of a movie
changing 20, 45
determining 35
disk cache 13
displays
using more than one 23

editing QuickTime movies 3039

62

Index

Index

email
sharing movies via 29
Empty Download Cache checkbox 13
Enable kiosk mode checkbox 22
Encoding Mode 53
equalizer 11, 19
exporting movies 4253

Fast Start 47
Favorites 17
file formats 9
filters (special effects) 45
firewalls 14
frame rate 18, 27, 44, 50, 53
full-screen mode 19

help
getting additional 10
onscreen 10
hinting 47
HomePage 29
HTTP 14

importing files 9
Instant-On streaming 14
Internet
connection speed 14
preparing movies for delivery over the 4648
saving movies from the 27
sharing movies via the 29

jog shuttle 18

keyboard shortcuts 55
key frame options 44

languages 37
Layer control 34

locked media files 17

looping 20

rotating a movie 38
RTSP 14

media keys 17
memory options 25
MIDI 16
MIME Settings 15
Mirror Displays 23
monitors. See displays
movie controller 41
Movie Download Cache Size slider 13
MPEG-4 files
exporting 4951
Multi-pass mode 53
Mute checkbox 32, 34

Open Image Sequence command 27

opening files 9, 11
opening files automatically 18
opening more than one movie at a time 20
Open Recent command 17

Save movies in disk cache checkbox 13

saving a movie 27
secured media files 17
selecting part of a movie 30
self-contained movies 26
sharing movies 29
Show Movie Info command 18
Single-pass mode 53
size
changing movie 20, 45
slideshow
creating from still images 27
slideshows 24, 27
Solo checkbox 32, 34
special effects 45
still images
converting to slideshow 27
exporting frames from a QuickTime movie 28
viewing and modifying 16
streaming 47
subtitles 22
system requirements 9

new features in QuickTime 7 7

pass through 53
pasting items into a movie 35
playback options 13, 18, 41
playhead 11
playing movies 11
playing sound 19
Play movies automatically checkbox 13
poster frames 41
Preferences 18
Preload this track checkbox 25, 41
Preview application 16
protocols 14

QuickTime Player Preferences 18

QuickTime plug-in 12
QuickTime Pro
defined 6
getting 23
QuickTime Streaming 47
QuickTime VR movies 15
QuickTime website 13

recording audio and video 25

reference movies 13, 26, 27, 48
repeating a movie 20
resizing a movie 38

Index

technical support 10
text
adding a text track 35
finding 22
overlaying a movie with text 36
specifying font styles 36
titles 22
tracks 3237
adding an audio track 33
adding a text track 35
disabling 32
transparency 39
treble level 18, 34
Trim to Selection 31

versions
getting new versions of QuickTime 10
video frame
changing the size of 45
video masks 39
virtual reality movies 15
volume 11, 34
adjusting during playback 12
changing sound track volume 34

web. See Internet

63