Scribd Logo
Upload

Welcome to Scribd!

  • 313 views

    Lix 860-I Ti Evh 0134 PDF

    Uploaded by

    Kittiphong Khunkrua
    LIX 860-I, 5-dodecylsalicylaldoxime in a high flash point hydrocarbon diluent, is a very strong copper extractant requiring more than 225 g / l H2SO4 for stripping. It extracts copper according to the equation below: 2RH(org) + Cu+2(aq)

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lix 860-I Ti Evh 0134 PDF

    Uploaded by

    Kittiphong Khunkrua
    313 views2 pages
    LIX 860-I, 5-dodecylsalicylaldoxime in a high flash point hydrocarbon diluent, is a very strong copper extractant requiring more than 225 g / l H2SO4 for stripping. It extracts copper according to the equation below: 2RH(org) + Cu+2(aq)

    Original Title

    LIX_860-I_TI_EVH_0134.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    LIX 860-I, 5-dodecylsalicylaldoxime in a high flash point hydrocarbon diluent, is a very strong copper extractant requiring more than 225 g / l H2SO4 for stripping. It extracts copper according to the equation below: 2RH(org) + Cu+2(aq)

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    313 views2 pages

    Lix 860-I Ti Evh 0134 PDF

    Uploaded by

    Kittiphong Khunkrua
    LIX 860-I, 5-dodecylsalicylaldoxime in a high flash point hydrocarbon diluent, is a very strong copper extractant requiring more than 225 g / l H2SO4 for stripping. It extracts copper according to the equation below: 2RH(org) + Cu+2(aq)

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Information

    TI/EVH 0134 e
    February 2013

    Global Mining Solutions

    Page 1 of 2

    supersedes edition dated May 2012

     = r egistered trademark of BASF SE

    LIX 860-I
    Solvent Extraction Reagent

    Description LIX 860-I, 5-dodecylsalicylaldoxime in a high flash point hydrocarbon diluent,


    is a very strong copper extractant requiring more than 225 g/l H2SO4 for
    stripping.

    Principal uses LIX 860-I can be blended with LIX 84-I over a broad range to give copper
    extraction reagents of variable extractive strength. It extracts copper
    according to the equation below:
    2RH(org) + Cu+2(aq)

    R2Cu(org) + 2H+

    (aq)



    Typical properties



    LIX 860-I will also extract zinc from ammoniacal solutions.

    Performance specifications2:






    Maximum copper loading


    Extraction isotherm point
    Extraction kinetics
    Extraction Cu/Fe selectivity
    Extraction phase separation
    Strip isotherm point
    Strip kinetics
    Strip phase separation

    Physical form:
    Specific gravity (25 /25 C):
    Flash point1:
    Copper complex solubility:
    1

    Fluid amber liquid


    0.900.92 g/cm
    Greater than 160 F
    >30 g/l Cu at 25 C

    Flash point is determined by Setaflash closed cup.

    5.5 to 5.9 g/l Cu


    5.00 g/l Cu
    95% (30 seconds)
    2500
    70 seconds
    3.50 g/l Cu
    95% (30 seconds)
    80 seconds

    Performance parameters are determined using the Standard Quality Control Test Of LIX Reagents


    Shipping & Handling
    LIX 860-I is supplied in 20 kg jerrican, 182 kg drum or 900 kg IBC.

    Technical service Advice and assistance in the running of laboratory and plant tests is given
    by representatives of BASF, who are experienced in mineral processing
    applications.
    Health & Safety Detailed information on handling and any precautions to be observed in the
    use of the product(s) described in this leaflet can be found in our relevant
    health and safety information sheet.

    TI/EVH 0134 e February 2013

    Page 2 of 2

    LIX 860-I

    Note The data contained in this publication are based on our current knowledge
    and experience. In view of the many factors that may affect processing
    and application of our product, these data do not relieve processors from
    carrying out their own investigations and tests; neither do these data imply
    any guarantee of certain properties, nor the suitability of the product for a
    specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and
    do not constitute the agreed contractual quality of the product. It is the
    responsibility of the recipient of our products to ensure that any proprietary
    rights and existing laws and legislation are observed.

    BASF SE
    Global Mining Solutions
    67056 Ludwigshafen, Germany
    www.basf.com/miningsolutions

    February 2013

    BASF Corporation Tucson, Mining Chemistry


    2430 North Huachuca Drive
    Tucson, Arizona 85745-8891, USA

    You might also like