COMPLETE REVISION

December 2005

Process Industry Practices

Piping

PIP PN06CB1S01
Piping Material Specification 6CB1S01
Class 600, Killed Carbon Steel,
Socket Weld, 0.063" C.A. Process

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has
been prepared from the technical requirements in the existing standards of major
industrial users, contractors, or standards organizations. By harmonizing these technical
requirements into a single set of Practices, administrative, application, and engineering
costs to both the purchaser and the manufacturer should be reduced. While this Practice
is expected to incorporate the majority of requirements of most users, individual
applications may involve requirements that will be appended to and take precedence
over this Practice. Determinations concerning fitness for purpose and particular matters
or application of the Practice to particular project or engineering situations should not
be made solely on information contained in these materials. The use of trade names
from time to time should not be viewed as an expression of preference but rather
recognized as normal usage in the trade. Other brands having the same specifications
are equally correct and may be substituted for those named. All Practices or guidelines
are intended to be consistent with applicable laws and regulations including OSHA
requirements. To the extent these Practices or guidelines should conflict with OSHA or
other applicable laws or regulations, such laws or regulations must be followed.
Consult an appropriate professional before applying or acting on any material
contained in or suggested by the Practice.

This Practice is subject to revision at any time by the responsible Function Team and will
be reviewed every 5 years. This Practice will be revised, reaffirmed, or withdrawn.
Information on whether this Practice has been revised may be found at www.pip.org.

Process Industry Practices (PIP), Construction Industry Institute, The

University of Texas at Austin, 3925 West Braker Lane (R4500), Austin,
Texas 78759. PIP member companies and subscribers may copy this Practice
for their internal use. Changes, overlays, addenda, or modifications of any
kind are not permitted within any PIP Practice without the express written
authorization of PIP.

PIP will not consider requests for interpretations (inquiries) for this Practice.
PRINTING HISTORY
October 1995
February 1999

Issued as PIP PN06CB1P

Revision

Not printed with State funds

June 1999
May 2000

Revision
Revision

December 2005

Complete Revision

COMPLETE REVISION

PIP PN06CB1S01
Piping Material Specification Line Class 6CB1S01

December 2005
SERVICE:
RATING CLASS:
TEMPERATURE LIMIT:
NOMINAL CORROSION ALLOWANCE:
PRESSURE - TEMPERATURE RATINGS
TEMP F
-20 to 100
200
TEMP C
-29 to 38
93

Process
600, ASME B16.5a-1998
-20F to 800F (Note 09, 27)
0.063 in. (0.05 in. MIN)

300
149

400
204

500
260

MATERIAL:
DESIGN CODE:
STRESS RELIEF:
EXAMINATION:

Killed Carbon Steel

ASME B31.3-2002
Per ASME B31.3
Per ASME B31.3

600
316

700
371

800
427

For NPS 1/2 through NPS 8 (Full flange ratings per ASME B16.5, Table 2-1.1.)
psig
1480
1350
kPag
10205
9310
For NPS 10 through NPS 48 (Note 01)
psig
Calc
Calc
kPag
Calc
Calc
ITEM
PIPE

NIPPLES
Branch
Swage (CONC)
Swage (ECC)
FITTINGS
Sockolet
Thredolet
SW Latrolet
THRD Latrolet
SW Elbolet
THRD Elbolet
90 ELL
45 ELL
Tee
Tee (RED)
Plug
Coupling
Coupling (RED)
Coupling
Coupling (RED)
Cap
Cap
Reducing Insert
Union (GJ)
Reducer (CONC)
Reducer (CONC)
Reducer (ECC)
Reducer (ECC)
Weldolet
90 LR ELL
90 LR ELL
45 LR ELL
45 LR ELL
Tee
Tee
Cap

NOTES
01, 19, 137

1315
9065

1270
8755

1200
8275

1095
7550

1065
7345

825
5690

Calc
Calc

Calc
Calc

Calc
Calc

Calc
Calc

Calc
Calc

Calc
Calc

NPS

SCH/RAT

ENDS

DESCRIPTION

1/2 - 2
3
4-8
10 - 24
26 - 48

XS
STD
XS
Calc
Calc

CS, SMLS, ASTM A106-B (Ej=1.00)

CS, SMLS, ASTM A106-B (Ej=1.00)
CS, SMLS, ASTM A106-B (Ej=1.00)
CS, SMLS, ASTM A106-B (Ej=1.00)
CS, EFW, ASTM A671-CB60, CLASS 12 (Ej=1.00)

1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 1-1/2

XS
XS
XS

CS, SMLS, ASTM A106-B (Ej=1.00)

CS, ASTM A234-WPB-S, MSS SP-95
CS, ASTM A234-WPB-S, MSS SP-95

1/2 - 1-1/2
1/2 - 2
1/2 - 1-1/2
1/2 - 2
1/2 - 1-1/2
1/2 - 2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 2
1/2 - 2
1/2 - 1-1/2
1/2 - 2
1/2 - 1-1/2
1/2 - 1-1/2
2 - 24
26 - 48
2 - 24
26 - 48
2 - 42
2 - 24
26 - 48
2 - 24
26 - 48
2 - 24
26 - 48
2 - 48

Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000

USER CODE

03, 19

02
03
03
03

03

03
03
03

05

Process Industry Practices

Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000

Weld
Weld
Weld
Weld
Weld
Weld
SW
SW
SW
SW
THRD
SW
SW
THRD
THRD
SW
THRD
SW
SW
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld

CS, ASTM A105, MSS SP-97

CS, ASTM A105, MSS SP-97
CS, ASTM A105
CS, ASTM A105
CS, ASTM A105
CS, ASTM A105
CS, ASTM A105, ASME B16.11
CS, ASTM A105, ASME B16.11
CS, ASTM A105, ASME B16.11
CS, ASTM A105, ASME B16.11
CS, ASTM A105, round head, ASME B16.11
CS, ASTM A105, ASME B16.11
CS, ASTM A105, ASME B16.11
CS, ASTM A105, ASME B16.11
CS, ASTM A105, ASME B16.11
CS, ASTM A105, ASME B16.11
CS, ASTM A105, ASME B16.11
CS, ASTM A105, MSS SP-79
CS, ASTM A105, integral seat, MSS SP-83
CS, ASTM A234-WPB-S, ASME B16.9
CS, ASTM A234-WPB-W, ASME B16.9
CS, ASTM A234-WPB-S, ASME B16.9
CS, ASTM A234-WPB-W, ASME B16.9
CS, ASTM A105, MSS SP-97
CS, ASTM A234-WPB-S, ASME B16.9
CS, ASTM A234-WPB-W, ASME B16.9
CS, ASTM A234-WPB-S, ASME B16.9
CS, ASTM A234-WPB-W, ASME B16.9
CS, ASTM A234-WPB-S, ASME B16.9
CS, ASTM A234-WPB-W, ASME B16.9
CS, ASTM A234-WPB-S, ASME B16.9

Page 1 of 3

COMPLETE REVISION

PIP PN06CB1S01
Piping Material Specification Line Class 6CB1S01

ITEM

December 2005

NOTES

NPS

SCH/RA
T

ENDS

DESCRIPTION

15

1/2 - 2
1/2 - 2
1/2 - 2
3 - 24
26 - 48
1/2 - 2
3-8
1/2 - 2
3 - 24
26 - 48
3 - 24
26 - 42
1/2 - 2
3-4
3
6 - 24
26 - 48
4 - 24
26 - 48
3 - 24
26 - 48

Class 600
Class 800
Class 800
Class 600
Class 600
Class 800
Class 600
Class 800
Class 600
Class 600
Class 600
Class 600
Class 600
Class 600
Class 600
Class 600
Class 600
Class 600
Class 600
Class 600
Class 600

RF
SW
T/SW
RF
RF
SW
RF
SW
RF
RF

SW
RF
RF
RF
RF
RF
RF
RF
RF

CS body w/ 13 CR trim, HF ST
CS body w/ 13 CR trim, HF ST
CS body w/ 13 CR trim, HF ST
CS body w/ 13 CR trim, HF ST, FP
CS body w/ 13 CR trim, HF ST, FP
CS body w/ 13 CR trim, HF ST
CS body w/ 13 CR trim, HF ST
CS body w/ 13 CR trim, HF ST, piston
CS body w/ 13 CR trim, HF ST
CS body w/ 13 CR trim, HF ST
CS body w/ 410 SS disc/ST
CS body w/ 410 SS disc/ST
CS body w/ 316 SS trim, RTFE ST
CS body w/ 316 SS trim, RTFE ST
CS body w/ 316 SS trim, RTFE ST, FP
CS body w/ 316 SS trim, RTFE ST, GO
CS body w/ 316 SS trim, RTFE ST, GO
CS body w/ 316 SS trim, RTFE ST, GO, FP
CS body w/ 316 SS trim, RTFE ST, GO, FP
CS body w/ 316 SS trim, RTFE ST, GO
CS body w/ 316 SS trim, RTFE ST, GO

1/2 - 1-1/2
1/2 - 24
26 - 48
2 - 24
26 - 48
2 - 24

Class 600
Class 600
Class 600
Class 600
Class 600
Class 600

RF
RF
RF
RF
RF
RF

CS, ASTM A105, ASME B16.5

CS, ASTM A105, ASME B16.5
CS, ASTM A105, ASME B16.47 Series B
CS, ASTM A105, ASME B16.5
CS, ASTM A 105, ASME B16.47 Series B
CS, ASTM A105, ASME B16.36, SW taps

1/2 - 24

Class 600

26 - 48

Class 600

USER CODE

VALVES
Gate
Gate
Gate
Gate
Gate
Globe
Globe
Lift Check
Swing Check
Swing Check
Dual PLT Check
Dual PLT Check
Ball
Ball
Ball
Ball
Ball
Ball
Ball
Lug Butterfly
Lug Butterfly
FLANGES
Socket Weld
Blind
Blind
Weld Neck
Weld Neck
Pair WN Orifice
GASKETS

BOLTING
Stud Bolts

Page 2 of 3

06

61
62
62
07, 26, 63
07, 26, 63
09
09
08, 09
09
09
08, 09
08, 09
09
09
02

GA06CB500
GA08CB300
GA08CB200
GA06CB501
GA06CB503
GL08CB300
GL06CB500
CL08CB300
CS06CB500
CS06CB501
CD06CB700
CD06CB701
BA06CB300
BA06CB500
BA06CB501
BA06CB502
BA06CB504
BA06CB503
BA06CB505
BF06CB700
BF06CB701

Spiral wound Type 304 SS, w/ flexible graphite filler,

ASME B16.20
Spiral wound Type 304 SS, w/ flexible graphite filler,
ASME B16.20, ASME B16.47 Series B dimensions
ASTM A193, B7 stud w/ 2 heavy hex nuts ASTM A194, GR
2H

Process Industry Practices

COMPLETE REVISION

PIP PN06CB1S01
Piping Material Specification Line Class 6CB1S01

December 2005

BRANCH SIZE

90 BRANCH CONNECTION
Legend and Chart

E
P
S
T
W

48
42
36
30
24
20
18
16
14
12
10
8
6
4
3
2
1-1/2
1
3/4
1/2

T
P
P
P
P
P
P
P
P
P
P
P
W
W
W
W
S
S
S
S
48

T
P
P
P
P
P
P
P
P
P
P
W
W
W
W
S
S
S
S
42

T
P
P
P
P
P
P
P
P
P
W
W
W
W
S
S
S
S
36

T
P
P
P
P
P
P
P
P
W
W
W
W
S
S
S
S
30

T
P
P
P
P
P
P
P
W
W
W
W
S
S
S
S
24

T
P
P
P
P
P
P
W
W
W
W
S
S
S
S
20

T
P
P
P
P
P
W
W
W
W
S
S
S
S
18

T
P
P
P
P
W
W
W
W
S
S
S
S
16

T
P
P
P
W
W
W
W
S
S
S
S
14

T
P
T
P
P
W
W
W
W
W
W
W
W
S
S
S
S
S
S
S
S
12
10
HEADER SIZE

T
W
W
W
W
S
S
S
S
8

T
W
W
W
S
S
S
S
6

T
W
W
S
S
S
S
4

T
W
S
S
S
S
3

T
S
S
S
S
2

T
E
E
E
1-1/2

T
E
E
1

T
E
3/4

T
1/2

Reducing Tee
Branch Weld w/ Reinforcing Pad (Pad thickness equals run pipe thickness. Pad width equals 1/2 branch OD.)
Sockolet
Tee
Weldolet (Note 05)

NOTES:
01 If a pipe schedule is shown under "SCH/RAT," it shall be adequate for the full flange rating. If "CALC" is shown, the pressure limit may be lower than full
flange rating.
02 All butt-welded component thicknesses shall match the pipe thickness.
03 Threaded joints are permitted only at the outlet of vent and drain valves, hydrostatic connections, outlet instrument take-off valves, and to match equipment.
05 Integrally reinforced branch connections outside the sizes shown in the branch connection table are permitted. Weld thickness of integrally reinforced branch
connections shall be checked to determine if PWHT is required.
06 These valves shall be used only for vent, drain, and instrument connections.
07 These valves have no flanges but are installed between line flanges with extra-length bolts.
08 Full-port valves shall be used if indicated on the P&ID.
09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature
restrictions shall be consulted.
15 These valves shall be used if mating to flanged nozzles.
19 Sch 160 pipe and pipe nipples shall be used for threaded connections for sizes NPS 1/2 through NPS 1-1/2.
26 These check valves shall be used only if indicated on the P&ID.
27 Pipe and pipe components thicker than 1/2-inch may require impact-tested materials if the minimum design metal temperature is below 100F (38C). See
ASME B31.3, Paragraph 323.2.2.
61 These check valves shall be installed in a horizontal position with cover up.
62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow.
63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow.
137 Sch 160 pipe shall be used for threaded connections for NPS 2.

REFERENCES:
Process Industry Practices (PIP)
PIP PNF0200 - Vents, Drains, and Instrument Connection Details
PIP PNSMV003 - Carbon Steel Gate Valve Descriptions
PIP PNSMV004 - Carbon Steel Globe Valve Descriptions
PIP PNSMV005 - Carbon Steel Check Valve Descriptions
PIP PNSMV006 - Carbon Steel Ball Valve Descriptions
PIP PNSMV007 - Carbon Steel Butterfly Valve Descriptions

Process Industry Practices

Page 3 of 3