Bu Suelos GB

Raised access
floors
Raised access
floors
technical solutions
The contents of this catalog are protected by Intellectual Property Law, Royal Decree 1 / 1996. Any reproduction of it, in whole or in
part, without the consent of Porelanosa Grupo is liable under the Penal Code.
Index
Raised access flooring

System application areas
Panels with chipboard core
Panels with calcium sulfate core
Structure
Sound proofing properites of RAF
Installation of RAF
6
6
8
12
16
28
34
Raised access flooring for exteriors

Outdoor tiles to RAF for exteriors
Structure to RAF for exteriors
Plots properties
Installations of RAF for exteriors
39
40
40
40
42
Cli-ker n
Advantages
Components
Installation
45
46
47
48
Cli-ker n exterior
Advantages
Features
Components
Installation
50
50
50
52
53
How to get a budget of a butech system?
55
Raised access flooring

Raised access flooring (RAF) was created in response to the need to hide large volumes of cables, pipework, tubing, etc. that are typically found in offices,
technical rooms, and other locations. The installation of a raised floor creates a space under the floor where all these services, including equipment and room
cooling systems, can be neatly housed and hidden away.
System application areas

Facilities with a high volume of services or in rooms that house technical equipment that requires special ventilation.
Commercial applications: offices, libraries, museums, schools, shopping centres, etc.
Technical applications: telecommunications/electricity plants, control rooms, laboratories, data centres, etc.
Advantages

Ability to hide away all types of ugly and dangerous cables, pipes etc under the floor.
Improved installation efficiency in comparison to conventional floors (installation rate of about 40 m2/day).
Easy to take with you when relocating offices.
Option of rerouting services following installation of floor.
Advantages over other raised access floor systems

Able to withstand a high mechanical load.

The potential for combining different structures, as required in each particular case.
A high resistance to fire under laboratory tests.
Very low dimensional tolerances, between +0,1 and -0,2 mm. This means that the panels can easily be interchanged.
Cores made of high-performance materials with very high densities.
Compliance with UNE EN ISO 9001, guaranteeing quality controls during each stage of the manufacturing process.
On the top surface, any 60 x 60 ceramic tile by Porcelanosa or other non-ceramic coverings (plastic laminate, linoleum, vinyl, granite, aluminium, steel, carpet, parquet etc)
can be used.
Tiles protected by a plastic surround to prevent the edges from breaking.
A wide range of complementary products to ensure a good finish.
Panels with chipboard core

They are made of chipboard with a high-performance resin binder. Available in a thickness of 38mm, they feature an aluminum, galvanized steel or plastic
lower covering, thus offering slightly different properties to suit each individual case.
The panels have a plastic surround to prevent the edges from breaking.
Mechanical features
Table Technical Properties

Test standard EN 12825
U.M.
SIN
38M1F
Type of stringers
SIN
Coverage: A V D G C
Edging
Edging
Covering piece
38M1A
Type of stringers
Wood panel
Concentrated load centre of side of the panel (2.5 mm deflection)
kN
1.7
1.7
2.4
2.8
2.3
2.3
2.8
3.1
Maximum allowed load centre of side of the panel
kN
4.6
4.6
4.8
4.9
6.4
6.4
6.5
6.6
Concentrated load at the center of the panel (2.5 mm deflection)
kN
2.7
2.7
3.4
3.8
4.0
4.0
4.6
5.1
Maximum load allowed in the center of the panel
kN
6.7
6.7
6.9
7.0
7.6
7.6
7.7
7.8
Uniformly distributed load
kN/m2
Class according to EN 12825
14.0
14.0
18.0
22.0
21.0
21.0
25.0
30.0
1.9
1.9
2.6
2.6
2.6
3.2
3.5
Coverage: F L
Lower covering
Panel 38M1
kN
3.0
kN
4.8
4.8
5.0
5.1
6.5
6.5
6.6
6.7
kN
3.0
3.0
3.7
4.1
4.2
4.2
4.9
5.3
kN
7.1
7.1
7.3
7.4
7.7
7.7
7.8
7.9
kN/m2
15.0
15.0
19.0
23.0
22.0
22.0
26.0
31.0
Panel consisting of a chipboard core with a thickness 38 mm with a high-performance resin binder.
Coverage: T R S
Lower coating 38M1A:

With aluminum sheet of thickness of 0.15 or 0.05 mm to create an excellent barrier against fire and moisture, while forming an equipotential frame to maintain electrical continuity
features of the floor.
kN
1.1
1.1
1.2
1.4
1.8
1.8
1.9
2.0
kN
2.0
2.0
2.0
2.1
4.1
4.1
4.2
4.3
kN
2.0
2.0
2.2
2.3
3.0
3.0
3.4
3.5
Inside coating 38M1F:

To increase the flexural stiffness and the total mechanical resistance, the panel comes with a galvanized steel sheet of thickness of 0.05 mm on the inside. This allows, in addition obtaining
an excellent barrier against fire and moisture, while forming an equipotential frame to maintain electrical continuity features of the floor.
kN
2.4
2.4
2.4
2.5
6.3
6.3
6.4
6.4
kN/m2
The perimeter is beaded with anti-crunching plastic material with a thickness of 1 mm of ABS to upper ceramic coating with a thickness of 0.45 mm of ABS to the rest of upper coatings.
Note: the breaking load is obtained by multiplying by 2 the maximum load allowed.
8.0
8.0
9.0
11.0
12.0
12.0
13.0
14.0
Physical features (not including coating material):
U.M.
Tolerance
Nominal size
Standard Test
mm
-0.1 +0.2
598 x 598
600 x 600
Thickness
mm
-0.1 +0.2
38
Diagonal difference
mm
Mx.
0.4
Slope
15`
Density
Kg/m3
5%
720
Weight
Kg
5%
9.8
Mx.
1010
38M1A
38M1F
Transverse electrical resistance
EN 1081
Upper coating
Fire Resistance
EN 13501-2
Clase Bfl
Clase Bfl
Fire Reaction
EN 13501-1
30
30
A = Aluminum Sheet
F = Galvanized steel sheet
L = Plastic Laminate
V =Vinyl
D = Linoleum
G = Rubber
C = Carpet
P = Parquet
T = Ceramic
R = Stone recomposed
S = Natural Granite
Panel 38M2
Panel consisting of a chipboard core with a thickness 38 mm with a high-performance resin binder.
Mechanical features:
Lower coating 38M2a:

Lower coating 38M2F:
To increase the flexural stiffness and the mechanical resistance, it is applied in the panel a sheet of galvanized steel of thickness 0.5 mm on the lower side.
This allows, in addition obtaining an excellent barrier against fire and moisture, to form an equipotential frame to maintain electrical continuity features of the floor.

U.M.
U.M.
Tolerance
Upper coati
mm
-0.1 +0.2
598 x 598
600 x 600
Thickness
mm
-0.1 +0.2
38
Diagonal difference
mm
Mx.
0.4
Slope
15`
Density
Kg/m3
5%
650
Weight
Kg
5%
8.9
Max.
1010
EN 1081
SIN
kN
1.5
1.5
2.0
2.4
2.0
2.0
2.4
2.6
kN
3.9
3.9
4.1
4.2
5.4
5.4
5.5
5.6
kN
2.4
2.4
3.0
3.4
3.6
3.6
4.1
4.6
kN
6.0
6.0
6.2
6.3
6.9
6.9
7.0
7.1
kN/m2
13.0
13.0
16.0
19.0
19.0
19.0
22.0
27.0
1.6
1.6
2.2
2.2
2.2
2.7
3.0
Coverage: F L
Nominal size

Standard Test
38M2F
Type of stringers
Coverage: A V D G C
SIN
38M2A
Type of stringers
38M2A
38M2F
Fire Resistance
EN 13501-2
Clase Bfl
Clase Bfl
Fire Reaction
EN 13501-1
30
30
A = Aluminum Sheet
V =Vinyl
kN
kN
4.1
4.1
4.2
4.3
5.6
5.6
5.7
5.8
kN
2.7
2.7
3.3
3.7
3.8
3.8
4.4
4.8
kN
6.4
6.4
6.6
6.7
7.0
7.0
7.1
7.2
kN/m2
14.0
14.0
17.0
20.0
20.0
20.0
23.0
28.0
Coverage: T R S
D = Linoleum
G = Rubber
C = Carpet
P = Parquet
T = Ceramic
S = Natural Granite
2.6
kN
0.8
0.8
0.9
1.1
1.3
1.3
1.4
1.5
kN
1.7
1.7
1.7
1.8
3.3
3.3
3.4
3.5
kN
1.8
1.8
1.9
3.1
2.4
2.4
2.5
2.6
kN
2.1
2.1
2.1
2.2
5.0
5.0
5.1
5.2
kN/m2
7.0
7.0
8.0
10.0
10.0
10.0
12.0
13.0
10
11
Panels with calcium sulfate core

It consists of a mineral soul of a single layer based on calcium sulfate of high density. It can be found in thicknesses of 15, 29 and 34 mm and with lower
coating of aluminum or galvanized steel. As in the wood panels, the perimeter of all the panels has a plastic surround to prevent the edges from breaking.

U.M.
SIN
30SF
Type of stringers
SIN
Coverage: A V D G C
Perimeter protection
Perimeter protection
Upper coating
30SA
Type of stringers
Calcium sulphate core
kN
1.8
1.8
2.6
3.0
3.0
3.0
3.9
4.5
kN
2.6
2.6
2.7
2.8
4.9
4.9
5.0
5.1
kN
2.8
2.8
3.6
4.0
4.4
4.4
4.9
5.2
kN
4.1
4.1
4.3
4.5
8.2
8.2
8.3
8.4
kN/m2
15.0
15.0
19.0
23.0
21.0
21.0
24.0
29.0
1.9
1.9
2.7
3.1
3.1
4.0
4.6
Coverage: F L
Lower coating
Panel 30S
It is formed by a core of mineral of a single layer based of calcium sulfate, high-density 30 mm thickness, with a high-performance resin binder and completely free of wood particles.
Lower coating 30SA:
kN
3.1
kN
2.7
2.7
2.8
2.9
5.0
5.0
5.1
5.2
kN
3.1
3.1
3.9
4.2
4.6
4.6
5.2
5.5
kN
4.2
4.2
4.4
4.6
8.4
8.4
8.5
8.6
kN/m2
16.0
16.0
20.0
25.0
23.0
23.0
26.0
31.0
Coverage: T R S
kN
1.4
1.5
1.6
1.7
1.6
1.6
1.8
1.9
kN
2.1
2.1
2.1
2.2
2.2
2.2
2.2
2.3
kN
2.4
2.5
2.6
2.7
2.6
2.6
2.7
2.9
Lower coating 30SF:

kN
3.0
3.0
3.1
3.1
3.1
3.1
3.2
3.3
kN/m2
10.0
10.0
11.0
13.0
11.0
11.0
12.0
14.0
U.M.
Tolerance
Nominal size
Standard Test
mm
-0.1 +0.2
598 x 598
600 x 600
Thickness
mm
-0.1 +0.2
30
Diagonal difference
mm
Mx.
0.4
Slope
15`
Density
Kg/m3
5%
1.500
Weight
Kg
5%
16.2
Max.
107
30SA
30SF
12
EN 1081
Upper coati
Fire Resistance
EN 13501-2
Clase Bfl
Clase Bfl
Fire Reaction
EN 13501-1
30
30
A = Aluminum Sheet
V =Vinyl
D = Linoleum
G = Rubber
C = Carpet
P = Parquet
T = Ceramic
S = Natural Granite
13
Panel 15K
Consisting of mineral support material with a layer of inert nominal thickness 12.5 mm.
Upper coating consisting of whole stone of natural stone materials (marble or granite), nominal thickness of 20 mm, rectifying, polishing and chamfering.
The elaboration of the panel includes the rectification of precision to ensure the dimensional tolerances in both the perimeter and the thickness of the panel, to ensure a perfect modularity.
Lower coating 15kf:
The perimeter is beaded with anti-crunching plastic material with a thickness of 1 mm of ABS to upper ceramic coating with a thickness of 0.45 mm of PVC to the rest of upper coatings.
U.M.
Tolerance
Nominal size
Standard Test
mm
-0.1 +0.2
594 x 594
Thickness
mm
-0.1 +0.2
12.5
Diagonal difference
mm
Mx.
0.4
Slope
15`
Density
Kg/m3
5%
1.100
Kg
5%
4.8
Mx.
107
Weight
EN 1081
Upper coati
S = Natural Granite
15KF
Fire Resistance
EN 13501-2
Clase Bfl
Fire Reaction
EN 13501-1
30
15KF
Type of stringers
U.M.
SIN
Coverage: S
kN
1.4
1.4
1.6
1.8
kN
4.1
4.1
4.2
4.3
kN
2.4
2.4
2.6
2.9
kN
4.9
4.9
5.0
5.1
kN/m2
12.0
12.0
14.0
17.0
14
15
Structure
Pedestals
The structure is made up of pedestals and stringers, which support the floor covering and ensure the necessary height and rigidness.
The pedestal is available in two versions:
Pedestals
Stringers
100% galvanised steel structure. This pedestals dictate the floor height according to the
project requirements. Each pedestal incorporates a series of plastic noise-reduction heads
fitted with four positioning lugs.
One of the main advantages of the pedestal system is that it is fitted with a 14 mm threaded bolt that can be adjusted to accommodate different floor height requirements.
Like the pedestals, the stringers are made entirely of galvanised steel. Their main function
is to increase the strength of the floor. They are covered with special noise-reduction strips.
Version with screw-in fitting for reduced height (nominal values of 55.70 and 85
Version with tube for higher heights (from 100 mm nominal).
In both versions, the pedestal is made entirely of galvanized steel (minimum thickness of
3, white color) on all surfaces (both visible as not) and including the cut parts by galvanizing bath based of ions Cr3 + electro deposited.
Model (nominal height)
055
Versions
070
085
100
130
150
with screw-in fitting
190
220 620
with tube
Nominal height
mm
55
70
85
100
130
150
190
from 220 to 620 mm

with 40 mm step
Nominal range of height adjustment
mm
10
15
-15
+20
20
30
-30
+35
40
50
Permissible axial load with safety factor 2

(ref. UNE EN 12825)(*)
kN
40
30
25
22
21
20.5
20
20
(*): The allowable axial load is given to the first deformation. The breaking load or collapse load is obtained by multiplying the permissible axial safety factor equal to 2.
The nominal heights and the way of the pedestals have been selected for greater overlap between two successive pedestals using a long screwed bolt.
Because of this, it has obtained a greater range of height adjustment for each type of pedestal (nominal - / +50 mm) with the ability to better adapt to the unevenness of the floor, without
resorting constantly to systematic measurements.
From the point of view of performance, it presents a high resistance to bending vertical load and / or eccentric, thanks to a screwed bolt M16 section, a tube of diameter 20 mm of thickness
of 2 mm, internally calibrated to obtain a coupling with smaller tolerances and therefore less spaces and a direct connection between the screwed bolt of the disc base and tube, without
need of interposing deformable plastic elements.
To ensure electrical continuity of the pedestal, the base disc has been drilled to accommodate the screw and nut for electrical connection.
In the disc of base have been added 4 holes of 8,5 mm and 3 holes of 6,5 mm, at the height of the radial nerves, to enable and facilitate the injection of fluid adhesive on the back of the
base when the pedestal is already installed.
When necessary, and with a simple intervention without special tools, the structure offers the possibility to adjust the height of the pedestal shortening the tube if necessary.
>100 mm
<100 mm
Screw-in fitting version
16
Tube version
17
psa pedestals
It is supplied in a unique version with adjustment under the head to cover a range of nominal heights of finished pavement of a minimum of 110 mm up to 500 mm.
The nominal height of the finished pavement is achieved by adding the thickness of the panel to the nominal height of the pedestal. The pedestal is made completely of steel with galvanized superficial treatment of minimum thickness of 3 by galvanizing bath based on chromium ions electro deposited, applied to all surfaces.
The pedestal consists of two main elements: the head riveted to the screwed bolt and base disc riveted to the tube.
The pedestals are supplied with joints to the head, semi-rigid plastic printing, black, conductor, carrying an anti vibration function of air sealing and centering of the panel.
Model (nominal height)
75
95
130
Versions
170
200
260
310
360
410
With adjustment under the head
Nominal height
mm
75
95
130
170
200
260
310
360
410
Nominal range of height adjustment
mm
15
15
30
30
30
40
40
40
40
Permissible axial load with safety factor 2

(ref. UNE EN 12825)(*)
kN
70
70
70
68
65
60
48
35
26
(*): The allowable axial load is given to the first deformation. The breaking load or collapse load is obtained by multiplying the permissible axial safety factor equal to 2.
It recognizes that the raised technical floor has obtained the certification PSA Medium Grade with the following settings:

35SF panel
Structure with pedestal of nominal height of 410 mm, set at a maximum height of 450 mm, and stringers of type P.
Therefore, for heights higher to 450 mm and with panels or other structures, the obtained certification is not applicable.
Overview of the pedestal
The following is an overview of the pedestal above mentioned.
18
19
References
Joints to head of pedestal
KEA
Description
SAP
KEA
Description
SAP
B80305602
PEDESTAL H = 55 MM (-10/+10)
100091646
B80305598
PEDESTAL H = 500 MM (-50/+50)
100091644
B80305609
PEDESTAL H = 70 MM (-15/+15)
100091649
B80305603
PEDESTAL H = 540 MM (-50/+50)
100091645
B80305605
PEDESTAL H = 85 MM (-15/+20)
100091650
B80305613
PEDESTAL H = 580 MM (-50/+50)
100091647
B80305614
PEDESTAL H = 100 MM (-20/+20)
100091624
B80305616
PEDESTAL H = 620 MM (-50/+50)
100091648
B80305606
PEDESTAL H = 130 MM (-30/+30)
100091625
B80305584
PEDESTAL H = 75 MM (-15/+15) PSA
100090839
B80305589
PEDESTAL H = 150 MM (-30/+35)
100091079
B80305374
PEDESTAL H = 95 MM (-15/+15) PSA
100084397
B80305612
PEDESTAL H = 190 MM (-40/+40)
100091626
B80305266
PEDESTAL H = 120MM (-30/+30) PSA
100072166
B80305599
PEDESTAL H = 220 MM (-50/+50)
100091627
B80305272
100072716
B80305608
PEDESTAL H = 260 MM (-50/+50)
100091628
B80305265
100072167
B80305601
PEDESTAL H = 300 MM (-50/+50)
100091629
B80305273
100072717
B80305600
PEDESTAL H = 340 MM (-50/+50)
100091640
B80305375
100084396
B80305615
PEDESTAL H = 380 MM (-50/+50)
100091641
B80305351
PEDESTAL H = 420MM (+50/-50) PSA
100082735
B80305604
PEDESTAL H = 420 MM (-50/+50)
100091642
B80305352
PEDESTAL H = 460MM (+50/-50) PSA
100082736
B80305607
PEDESTAL H = 460 MM (-50/+50)
100091643
Junta para la cabeza del pedestal, de plstico semirrgido estampado, no conductora (resistencia elctrica R>1010 Ohm) de color negro opaco, espesor nominal 2,5mm, y de forma cuadrada con ngulos redondeados. Cada ngulo est provisto de un diente de agarre para centrar y enganchar al cabezal de la base de sujecin. En la parte superior, est provista de cuatro
dientes para el posicionamiento y el centrado de los paneles. La junta acta tambin atenuando los ruidos. Su peso nominal es 5 gr.
Joints to head of PSA pedestal

Semi-rigid plastic stamped in black, conductive electrical resistance R <104 , is shaped and fitted with 4 teeth on the lower surface for better accommodation self-centered in the head
and 4 teeth of knife on the upper surface for positioning and centering the panels. The number of rays (4 or 8) depends on the chosen configuration. The special shape and variable thickness (from 2 mm at least at the ends of each radio) are perfectly adapted to the head of the pedestal to ensure greater comfort underfoot. The joint also plays an anti vibration function.
Joint for head without stringers
Joint for head with stringers L, M and P
Type of stringer: S.
Type of joint: 8 radios.
Section thickness (pz/m2): 3.3
Type of stringer: L, M y P.
Type of joint: 4 radios.
Section thickness (pz/m2): 3.3
References
20
KEA
Description
SAP
B80305238
junta de pedestal 4r. PSA
100072188
B80305236
junta de pedestal 8r. PSA
100071935
B80305590
junta de pedestal
100091081
21
Stringers
butech can supply two different types of stringers:
Stringers version P. Heavy.
Heavy Stringer (P) has obtained a special profiling of galvanised steel which increases its performance with respect to the L and M models (material: Dx51D + Z150 according to EN
10142 with minimum thickness 15 hot dip galvanizing). They are closed section (30 mm wide, 30 mm high and 1 mm thick) and 600 gr. weight. The ends are fitted with a system of
special hook that allows optimum and fast placement on the radii of the head of the pedestals. The stringer is equipped with a hole for the ground connection.
Basic stringer of orthogonal direction connection (versions L, M or P);

Additional stringers of diagonal direction connection (versions D or X).
All stringers are produced by cold stamping galvanized steel sheet (minimum thickness of 3),
with special profile and are designed to improve mechanical endurance and ensure reduced tolerances of modules and the ease of exchange them.
Its blockage in the radios by auto-tapping metric screws ensures the electric continuity of the
system and gives a great stability to the structure.
Stringers version L (light)
Lightweight Stringer (L) has been obtained by means of stamping cold from galvanized steel
sheet (material Dx51D + Z 150 according to EN 10142 with minimum thickness 15 hot dip
galvanizing). They are opened section (30 mm width, 21mm height, 0.8 mm thick) and 220 gr.
weight. The stringer is equipped at both ends with the snap-on system, a system of special hook that allows optimum and fast placement on the radii of the head of the pedestals, that
ensures electrical continuity of the system.
Stringer section P
30x30x1 mm
Length
VARIABLE
Unit Weight
580 gr
Nominal amount
5,7 pz/m2
Nominal amount screws
11,4 pz/m2
Stringers of diagonal connection (version D or X)
Stringer section L
30x21x0,8 mm
Length
VARIABLE
Unit Weight
220 gr.
Nominal amount
5,7 pz/m2
11,4 pz/m2
All the stringers are supplied with special joints of black extruded plastic with anti vibration function and air tightness. They do not have sharp edges, especially dangerous
during handling and assembly, which may damage the plastic covering to pass underneath.
Stringers version M (medium)

Medium Stringer (M) has been obtained by means of stamping cold from galvanized steel sheet (material: Dx51D + Z 150 according to EN 10142 with minimum thickness 15 hot dip
galvanizing). They are opened section (30 mm wide and 38 mm height, 0.8 mm thick), and 390 gr. weight. It has longitudinal nerves, present also in the vertical sides and the laps of the
bottom side, to increase benefits with respect to bending, in comparison with the previous type L, and improve the way to control the deformations. In addition to the hole for the ground
connection, the ends are equipped with the system of special hook snap-on that allows optimum and fast placement on the radii of the head of the pedestals for the lock with screw,
ensuring in that way, electrical continuity of the system.
22
Stringer section M
30x38x0,8 mm
Length
VARIABLE
Unit Weight
390 gr
Nominal amount
5,7 pz/m2
11,4 pz/m2
Stringer section D
20x40x1 mm
Length
792 mm
Unit Weight
0,73 Kg
Nominal amount
2,8 pz/m2
5,6 pz/m2
Stringer section X
20x40x1 mm
Length
368 mm
Unit Weight
0,34 Kg
Nominal amount
11,1 pz/m2
22,2 pz/m2
Screws for stringers L/M/P types of structure
References
KEA
Description
SAP
B80305592
tornillos para travesaos l/m/p
100091083
B80305617
travesao ligero 598x598
100091655
B80305618
travesao medio 598x598
100091659
B80305232
travesao pesado 598X598
100071899
The screws, made of galvanized steel, are used to connect the STRINGER at the head of the
pedestal to give greater security and stiffness to the system stiffness.
23
Joint for stringers
Types of structure
Extruded black plastic, thickness of 1 mm, non-conductive, anti vibration function and air tightness. The joint is applied in the stringer with a simple hand pressure.
The structure offers several configuration options that can be performed using both orthogonal and diagonal stringers, increasing the mechanical stability and capacity of the
pavement. Such stringers are used light, medium and heavy which are placed in the radii of the head of the pedestals. The diagonal stringer D or X (stringers shape) can be used
with any orthogonal stringer (L, M or P).
Joint for stringers type L, M and P

Section dimensions
30x8 mm
Nominal length
546 mm
Nominal amount
5,7 pz/m2
Configuration
Type S
Without stringers
Range 55 620 mm.
Type L
Light stringers.
Range 55 620 mm.
Type M
Medium stringers.
Range 55 620 mm.
Type P
Heavy stringers.
Range 55 620 mm.
Configuration perimeter zones
Joint for stringers type X and D

Type D
Section dimensions
20x8 mm
Nominal length
783 mm
Nominal amount
2,8 pz/m2
Type X
Section dimensions
20x8 mm
Nominal length
358 mm
Nominal amount
11,2 pz/m2
References
24
KEA
Description
SAP
B80305234
junta de travesaos PSA
100071897
B80305591
junta de travesaos l/m/p
100091082
25
26
27
Sound proofing properites of RAF

A rooms soundproofing capacity depends on the soundproofing properties of each of its components, including the floor.
The factors that influence a RAFs soundproofing capacity are the material that the top covering is made of, the material of the core and its density, and the height of the plenum.
butechs RAFs are made of ideal soundproofing materials with the right densities to guarantee the best soundproof protection, with cores with a density of up to 1.500 kg/m3.
To ensure maximum comfort and good soundproof protection, butech conducts rigorous soundproofing tests of its floors, in accordance with DIN 52210. This standard analyses four
different cases: protection against airborne noise, impact noise, horizontal airborne noise and vertical airborne noise.
Horizontal transmission of noise

In the data presented are the steps taken in a real building in accordance with current regulations (EN ISO 14012), to assess the effect of reduction of the floor of modular access in relation to the horizontal transmission of
aerial noise ( or how a person on a floor of a building perceives the ambient noise present in an adjacent floor).
In this case, measures are taken with a modular access floor already installed. The noise pressure levels are taken
in the two adjacent floors and the horizontal aerial noise attenuation expressed by the norm of the parameter
Dnfw, measured in dB (decibels).
The higher the value the greater the reduction in relation to the object to be tested and therefore the greater the
reduction in aerial noise transmission from one floor to the adjacent.
The following data were collected from the panels:
The first diagram shows the values of Dnfw obtained in different structural configurations panels 38M1A and
35SA. The observed conditions differed depending on whether there were stringers or not, if there was a noise
insulation sheet placed between the substrate and the tile, and if it was adhered or not (it is required to paste the pieces that have been installed without stringers). On the other hand, it
was also considered installing an acoustic partition under the floor.
NOTE: The height of the supports was 300 mm for all configurations.
Attenuation of horizontal aerial noise (Dnfw) depending on access floor configuration
42
40
38
36
34
32
30
28
34
36
34
36
29
29
26
24
Structure without stringers
Structure with stringers
Structure P with acoustic insulation sheet without stick
34
36
Structure P with acoustic insulation sheet stuck
37
38
The same as previous situation

+ acoustic partition under
the floor
The table below allows obtaining the dB correction factors, which need to be added or removed for panels with multiple covers, starting with those without coating (those listed in the
first table).
Type of coating
28
Correction factor [dB]
Vinyl (V), rubber (G), linoleum (D)
Laminate (L), Steel (F)
-1
Natural stone (S) and reconstructed (R), Gres (T)
-1
Parquet (P)
29
The correction factors in dB, which are necessary to obtain the corresponding data for 38M2A panels (of 38M1A) and 30SA (of 35SA) are shown in the table below.
Type of coating
Calcium sulfate 30S

-1
Chipboard 38M2
Natural stone (S) and reconstructed (R), Ceramic tile (T)
-1
Finally, the correction factors in dB are shown below for obtaining panel data with a lower cover in steel instead of aluminum.
Type of coating
Steel (F)

0
Vertical transmission of noise

In the presented data are the steps taken in a real building in accordance with current regulations (EN ISO 140-8),
to evaluate the effect of reducing the modular access floor in relation to the transmission of noise surface of the
panel (or how a person in a . floor of a building perceives the noise present in an upper floor). In this case, measures are taken first without the modular access floor in order to determine the features of the building itself. The
same measures are taken then with the modular access floor already installed. The measurements are recorded
for the description of the differences of the effect of the added element (modular access floor). We present the
test results of impact noise reduction panel expressed by the parameter ALW measured in dB. The higher the
value the greater the reduction in relation to the object to be tested and therefore the greater the reduction in
the transmission of noise when walking on the floor that is transmitted to the lower floor.
The following data were collected from the panels:
The first diagram shows ALw values obtained in different structural configurations, and panels 38M1A and 35SA.
The observed conditions differed depending on whether there were stringers or not, if there was a noise insulation sheet placed between the support and the tile and if it was stuck or not (required to stick the pieces have
been installed without stringers).
NOTE: The height of the supports was 300 mm for all configurations.
Vertical impact noise attenuation (Lw) depending on the configuration of the access floor
36
34
32
30
28
26
24
36
34
21
23
22
20
18
21
23
25
25
28
28
34
34
16
Structure without stringers
Structure with stringers
Structure P with acoustic insulation sheet without stick
Structure P with acoustic insulation sheet stuck
The same as previous situation

+ acoustic partition under
the floor
The table below allows obtaining the dB correction factors, which need to be added or removed for panels with multiple covers, starting with those without coating (those listed in the
first table).
Type of coating
Vinyl (V), rubber (G), linoleum (D)
30

2
Laminate (L), Steel (F)
Natural stone (S) and reconstructed (R), Gres (T)
-2
Parquet (P)
31
The correction factors in dB, which are necessary to obtain the corresponding data for 38M1A panels and 30SA are shown in the table below.
Type of coating
Factor [dB]
Calcium sulfate 30S
-2
Chipboarda 38M1
-1
Finally, the correction factors in dB are shown below for obtaining panel data with a lower cover in steel instead of aluminum.
Type of coating
Steel (F)
Factor [dB]
-1
Installation of RAF
General information
The first stage of the installation begins with the definition of the two initial orthogonal axes, previously agreed with the Director of Operations and / or verifiable tracings or drawings.The
operation is carried out by attaching to the walls, a pair of orthogonally twisted nylon threads, at a height slightly higher than the system where it will be installed. To determine the angle
(90 ) of the two threads use the Pythagoras Theorem or simply 3-4-5 formula: starting at the crossing of the two threads, that delimits 3 m. in one and 4 m. in the other. The diagonal
between the 2 points should be 5m. (The larger the diagonal, the smaller the margin of error).
Installing a structure without stringers
The four pedestals must be completed with joints and already be leveled according to the altitude.
Place the first panel so that one corner is perfectly placed at the point where the threads cross (the position in terms of height can be obtained using a bubble level or laser level.
Note: before placing the pedestals, apply glue to the base to ensure that the pedestals are fixed firmly to the floor.
Continue installing the other pedestals; fill them with joints, and its related panels, aligning with one of the two threads of reference. Always check that the panels are installed at the
correct height and that the glue covers the base to ensure that the entire base is firmly fixed.
Continue placing the parallel rows of panels, using the same method described above, until all the inside panels have been installed. Be particularly careful about making sure the panels
are at right angles, lined and flat.
To ensure that all panels form a smooth surface, it is important not to disturb the floor during installation and for a minimum of 24 hours after the glue has been applied, the minimum
time required for fixing the glue properly.
NOTE: All supports must have joints.
Installing the stringers structure

Starting at the points where the two octagonal threads cross and aligning with them, install and screw in the different components of the structure, pedestals, stringers and screws.
Place the first wood panel so that one corner is perfectly placed at the point where the threads are crossed, then set the second panel being careful to align with the reference panel.
Continue placing panels in parallel with nylon threads until all panels have been placed, ensuring that all panels are at right angles, lined and flat.
All pedestals and stringers must have joints.
When Installing floor over 500 mm. of high it is advisable to fix pedestals to concrete slab with glue (taking care not to disturb the floor at least 24 hours after being applied).
Installation in perimeter zone
With structures of stringers, cut the stringers of perimeter to the required measure, fixing them with the proper screws and adjusting to the required height pedestals (the hole at the end
of the stringers-cutting can be done directly with fixing screws). Cover the stringers and pedestals with joints which have been cut to size.
Finish the floor cutting all the panels to the correct perimeter at correct measure, making sure that follow the shape of the wall perfectly. One of the simplest ways to do this is by placing
the panel that needs to be cut next to the row adjacent to the perimeter, using a separator ribbon panel, pass through the wall, supporting a pencil in the separator so that the exact part
to be cut can be marked.
When so requested, it is possible to apply a layer of varnish to act as anti-dust protection on the sides of the molded panels.
32
33
Installation design
Suggested procedure
Bolting the design dimensions is possible to draw a grid floor installation.

The grid is drawn according to strict procedures with regard to customer requirements that are stipulated in the contract for the installation (for example with a 45o installation, or
according to a principal axis, or a project reference, etc. .).
If no such indications, the grid should be positioned by calculating the minimum possible waste and avoiding small perimeter panel sections, setting initial two orthogonal axes.
To place them correctly, you should cut all perimeter panels. D
Avoid adjust complete panels to the perimeter walls if the walls are not perfectly linear, and therefore do not offer enough support or assurances that the panels are aligned properly. When possible, avoid close perimeters with panels less than 150 mm size, because they are less stable.
This procedure of graphic design can be carried by placing a sheet of paper with a squared tracing to the same scale on a map of the area or, alternatively, using a computer program
design. This procedure is extremely important to install the panels properly as it allows the necessary amount of material is determined and shown to planners and installers the
position of the pedestals and, thus, where the systems themselves fit.
To make the system easier to fit, it is also possible to trace the design of the floor in advance and thus mark the position of the pedestals with paint color.
This procedure can be carried out in different ways, but always in multiples of 600 mm.
It is often advisable to trace the surface with a suitable anti-dust varnish, usually vinyl or polyurethane. This serves to fix the concrete surface of the slab and prevent accumulation of
dust. This varnish is essential when the floor is to be used for air conditioning. This varnish is essential when the subfloor is to be used for air conditioning. To ensure that the concrete
slab is painted correctly, it must be thoroughly cleaned. After its application is advisable to let the varnish dry for a day at least. The procedure of varnishing will be faster and more
efficient if done before the installation system is installed. It is necessary to ensure that the anti-dust varnish is compatible with the adhesive used to attach the supports. Any dirt
or dust appeared of the work in the floor can be removed using a vacuum cleaner.
Assembly sequence
Working procedure
1.
2.
3.
4.
The correct assembly sequence is:

Check the status of progress of the construction site.
Check the installations design follows the lines of the tracing.
Install high technical floor.
During the installation procedure is necessary:

Decide the best assembly sequence for any interior wall or false ceiling.

Limit access to the area. If adhesives are used for fixing the panels to the structure, the panels should not be stepped on at least 48 hours after the placement has been completed.

Maintaining access to the building site and the building where the floor is being installed free of obstacles, so that materials can be unloaded near the place or lifting equipment.

Maintain the horizontal access to the area and free obstacle lifting devices to facilitate transportation between pallets.

Ensure clear routes for trucks of pallets to transport materials for the zone can be efficiently carried out.

Stipulate by contract the features and use of lifting devices for vertical transport.

The raised technical floor should be formally approved as soon as it has been installed in each individual environment, before any protection and coating are applied and in any case
before any other operation by the employees of the installation.
34
35
General site conditions

General information
The in-situ inspection allows that the general conditions of the place, the dimensions of the installation area, floor level, and / or correspondence from the planimetry
To gather any additional information and useful details for proper installation, in-situ inspection must be performed by authorized personnel from the workplace, including:

Customer.
Director of operations.
Foreman of the place.
Required information
Pallet of 60x120 with cardboard protection.

Average height 120 m
You need the following information:

The structure and shape of the perimeter walls.

A clear definition of the devices used to transport between building floors (e.g. trucks, road trains, etc.)..
The method used to download material (crane, tower crane, forklift ...) and the work involved.
The method of transport to be used to transport material within the installation area (crane, hoist, etc.)..
The dimensions and sizes must be compatible with the methods of transportation.
The height of the floor must be the indicated on the final draft.
Predisposition of an area for collecting material to dispose.
The presence of pipes that alter the hygrothermal parameters.It is recommended to isolate all sources of heat and provide an adequate ventilation system fitted with bars to ensure
constant environmental conditions.
The condition of the construction operations of the wall. All wall construction must be completed at least 60 days prior to installation; the activities of other operators should be
completed at least 30 days prior to installation.
The condition of the installation of windows and doors frames. The sizes and dimensions must be compatible with the transport devices when using a crane.
The condition of the concrete slab.
Compatibility with anti-dust products (if applicable) with the adhesive glue used to attach the pedestals.
Pallet of 60x120 with cardboard protection.

Average height 120 m
General site conditions

The state of the place of work of construction.

The construction zone should be cleared of all materials of access and to be clean before starting the installation. No worker or installer that is not one of those who work in installing
the floor should have access to the area.
Distribution of service. All service installations must comply with the design of the floor and take into account the overall dimensions of all components.
Specifications related to the installation of the floor level. The floor level of access must be clearly indicated by the Director of Operations. The floor level compatibility with any
eventual external constraint must be defined before starting the installation, all restrictions must be clearly communicated in the installation contract.
The presence of transport routes for the relocation of material.
General storage conditions

General information
The environments where technical raised floor is to be installed must be checked beforehand to ensure their suitability.
Recommended parameters are:

36
NO
The pallets can be stacked and transported by truck standar
forklifts or pallet trucks.
YES
The Environment should be dry and have sealed windows and door frames.
The level of moisture and temperature of storage should comply with the specifications described on the packaging.
The packaging must be handled with appropriate means of transport, such as pallet, etc
It is not advisable to stack the box.
The packaging should be protected from impacts.
Store away from heat sources.
Store near the area in which to settle the floor.
Do not unpack the materials unless strictly necessary. When unpacking, be careful when handling components to avoid damage and to ensure traceability.
Follow the manufacturers instructions that are on the packing.
37
Installation of finishes of perimeter.
Raised access flooring for exteriors
The finish on the perimeter, where no spikes against a wall, made of chipboard covered with tape on both sides of melanin, closes the perimeter area is visible and can be placed with a
metal in an L. In some cases, for example, when the difference in height between the floors is less than 17 cm, can also be used as a step.
The raised access floor (RAF) system for terraces has been specially created to provide an aesthetic solution for terraces containing unsightly drainage slopes.
By building a completely flat floor over the existing terrace floor, these slopes are conveniently hidden underneath.
Height deviations are offset with height-adjustable plots and any accumulated water is drained through open joints on the newly paved surface and then
channelled down the terraces waterproofed slopes to the drain.
When you set the position where the steps are to be installed, it is necessary to remove the pedestals 4.5 cm. and align with the axis of the panels. At this point, place the board that acts
as a lift against the axis of the panels and adjust it to the slab using screw caps and supports.
Perimeter boards are installed at the same height as the floor have an aluminum corner that can be easily fixed with wood screws and cover the thickness of the board itself and complete
it from an aesthetic standpoint.
Advantages

38
The system can be used to create a flat paved surface over sloping masonry floors with height deviations of up to 2%. Any height deviations over 2% will need to be corrected with
mortar or with wedges.
The creation of an air void under the newly paved surface generates a continuous flow of air through the pavement joints, which prevents the build-up of condensation and also
produces an insulation layer.
The under floor void, can also be used to house cables, pipes, etc.
Easy to access this space under the floor (do not use P-404 to bond tiles and plots in areas where you need to access the services underneath and be able to have space to work on it).
The cavity between the raised floor and the living area below also helps to reduce the penetration of noise into the home.
The system is quick to install as the tiles and supports are installed at the same time.
Advantages of PORCELANOSA Grupo pavement: Easy to clean, low dimensional tolerances, wide variety of finishes, hardness, etc.
39
The external RAF is an over-raised type of pavement developed by PORCELANOSA Grupo used for terrace covering and external areas. This type of over-raised pavement allows
flat surfaces on exterior supports that have slope, improving the aesthetic vision, the waterproofing and the drainage.
It is a type of over-raised pavement with special ceramic tiles that are arranged on plastic PVC plots of adjustable height, so that a hollow space is determined between the support and
the floor tiles.
The elements that make up this system are as follow:
Outdoor tiles to RAF for exterior

PORCELANOSA Grupo ceramic pieces.
The external RAF ceramic tiles consist of two porcelain stoneware slabs or technical porcelain stoneware by PORCELANOSA Grupo astuck with hot melt reactive to moisture.
They are made with a sufficient thickness to withstand the breaking load demanded on these over-raised pavements.
Thus, its main technical features are as follow:

Format: variable.
Thickness: between 20 mm and 30 mm approx.
Water absorption <0,5 %.
Breaking load > up to 9.8 kN.
Resistance to chemical attack: UA
These porcelain stoneware slabs or technical porcelain stoneware by PORCELANOSA Grupo are manufactured with needed thickness to withstand the breaking load indicated
above, which does not mean that on heavy shock or falls of heavy objects cannot produce the breaking of the same.
Structure of RAF for exterior

Plots with adjustable height.
These plots, made of weatherproof plastic, are the support on which the ceramic tile of external RAF rests. They determine the height of the system and width of the joint between slabs.
This element consists of the following parts:

Plot base: Large diameter base that distributes the weight on the support system.
Adjustable height rod that allows adapting height of the plot to the needs of the pavement over-raised.
Head: It is where the extrernal RAF rests. It has 4 dividers that determine joints of placement of a width of 4 mm.
The total height of the plot can be adjusted for different adjustable heights.
Plots properties

40
Manufactured by thermo-injection.
Colour: black.
Base of the material: polypropylene with mineral calcium carbonate side.
Technical stability (-25C + 120C).
Dimensional stability.
Mechanical average capacity to compression (up to 1,200 kg / unit).
Resistant to aqueous solutions of inorganic salts, acids and alkalies.
Resistant to most organic solvents as alcohol, esters and ketones.
Resistant to commercial detergents and bleach solutions.
Resistant to microorganisms for not being cultivation ground for these.
It does not punch the waterproofing sheets or thermal insulations.
Plots come marked with the slope to compensate (1% or 2%) and the installer will
point the distinctive flange towards the drain. This flange determines the maximum
height, which has to point towards the drain.
In angle or wall areas, top support flanges can be cut off to make the finishes fixing
easier.
Not resistant to oxidizing substances as nitric or sulfuric acid and halogenated hydrocarbon solvents such as gasoline.
Finishes of surfaces which allow the installation of plots:
-Mortar compression layers.
-Chlorine Rubber primers.
----
Butyl fabrics.
Auto protected asphalt fabrics.
Directly on the thermal insulation (extruded polystyrene with density 25
kg/m3).
-Sheets of PCV and TPO.
-Folding of common brick.
Prohibited its installation:
-in its entirety in facilities of animals such as pigs farms, etc.
-in facilities where there is road traffic (cars, trucks, etc.).
-on chippings, cellular concrete, directly on the ground and on not protected
asphalt sheets.
41
Installation of RAF for exterior

The weft of ceramic tiles is determined by the position of the plots. The external RAF slabs rest on these placed on the four corners of the tile, at least, although other positions may be
placed depending on the format size. Plot consumption per m2 depends on the chosen format.
The plots are fixed to the support using polyurethane adhesive (P-404). Similarly, and to avoid the tiles shaking, they are adhered to the plot.
This system is adapted to the needs of each customer, so in that way and from the project data, butech adapts the external RAF to the particularities of each project.
This position ensures good stability to the system and allows greater flexibility in the design of the ceramic weft, and it can design placements with catch joint.
The plots are to be placed on a solid support and a maximum gradient of 2%. For indoors, the support must be covered by a waterproof sheet, while outdoors, where no waterproofing
system is required, the plots may rest directly on the support, if it is solid and stable, with the flap fitted directed toward the drain.
This type of pavement in terraces avoids the need of cement mortar screeds for subsequent placement of cement-based tile adhesive. This system avoids the disadvantages of terraces that
may arise from the traditional placement of direct adhesion. The problems arising from variations in temperature, structural settlements or poor performance of the flooring are eliminated. It also allows obtaining additional benefits as a convenient accessibility at any time, allowing correct possible defects in the existing waterproofing and easy start work without the
need for highly specialized, reduced noise transmission and thermal protection of the room beneath the system due to the creation of an air chamber that is in constant ventilation and
the joints between tile and tile 4 mm left open for drainage of water.
References
KEA
SAP
Description
B80305010
100005802
basic plot 10
Height
10 mm
B80305011
100005803
basic plot 15
15 mm
B80305020
100005804
normal plot 50/70
50 - 70 mm
B80305021
100005805
normal plot 70/100
70 - 100 mm
B80305001
100005794
ultra plot 65/100
65 - 100 mm
B80305004
100005797
ultr aplot 100/130
100 - 130 mm
B80305003
100005796
ultra plot 130/220
130 - 220 mm
B80305005
100005798
ultra plot 220/310
220 - 310 mm
B80305006
100005799
ultra plot 310/400
310 - 400 mm
B80305007
100005800
ultra plot 400/490
400 - 490 mm
B80305008
100005801
ultra plot 490/580
490 - 580 mm
Ask for higher heights
42
43
Dry installation floor

New ceramic pavement system placed dry, without use of adhesives or joints, for indoor use. Quick and easy installation, accessible, recoverable, wide range of finishes and
minimal maintenance. Quick come into service, once placed it is ready to transit on it.
Coating for pavements of dry inside areas in premises of individual or collective use:

Office buildings.
Buildings of public use (administration, culture, museums, cinemas, etc ...)
Shopping centers.
Hotels.
Showrooms.
Shops.
Norm
UNE 10545-3
UNE 10545-4
UNE 10545-8
UNE 53130
Testing method
System
Length
598+-0,2 mm
Width
598+-0,2 mm
Thickness
16+-0,2mm
Water absorption
0,10%
Breaking module
3,87 Mpa
Breaking strenght
3,47 kN
Deflection
2,5 mm
Linear thermal expansion
2,5837E-05
Heradness shore (Polyurethane)
Method A 92
Density (Polyurethane)
1210 kg/m3
Dry installation floor

Because cli-Ker is a lift-up tile system, the tiles can be swiftly and easily changed if needed.
The tiles click into place thanks to a simple

tongue and grooved backing system.
44
Close-up of how the tiles fit together.
In this way, you can gain access to the under-floor area just by lifting up a tile.
45
Advantages
Components
The piece made in factory consists of the following:

Ceramic tile or porcelain of groups Blb and Bla as ISO 13006 and NF-EN 14411 of Porcelanosa Grupo.

Joint of polyurethane of 1 mm wide available in gray.

Base of polyurethane two-component rigid with cracks in the 4 corners shaped blade.
Quick and easy installation.

Clean.
Accessible.
Reusable.
Wide range of finishes.
Minimum maintenance.
Quick come into service, once placed it is ready to transit on it
Additional elements for placement are:

Pieces of union, locks in the form of blade of 5 mm height in polyurethane.

Pieces of regulation or compensation; rises and plugs of polyurethane, for leveling of the system. Thicknesses of 0.5 - 1 mm for the rises and 5 mm for the plugs.

Leveling sheet viscoelastic and acoustic attenuation.
Cli-ker n piece. 598x598 mm.
Levelling sheet
Cintex.
Catches. 5 mm high
Plug. 5 mm high
Compensation piece. 0,5 - 1 mm high.
References
46
SAP
KEA
Description
100096030
B81200209
Compensation piece 0,5mm
100096031
B81200207
Compensation piece 1mm
100096038
B81200208
Plug 5mm
100102785
B81200228
Catches 5mm
100103280
B15901003
Levelling sheet (9mt2)
47
Installation
Foregoing considerations

The support must be dry, free of dirt, construction debris or irregularities.

Check that the irregularity does not exceed 1.5 mm every rule of 2 m. The accumulated irregularity shall not exceed the deflection of the piece. There will be a previous rethink taking
as origin the intersection of 2 offset axis. It will be previously installed all the pavement with locks of 5 mm high.
There will be a taking of levels later and a visual inspection verifying that the pavement is firm, smooth and without lipping of tiles. It is possible the devasting of the base of
polyurethane for surface leveling.
It must be left a perimeter joint of 0,5 cm, which will be hidden once placed the skirting board.
In addition to the components supplied for placement, we must have pliers, cutter, machine of ceramic cutting and rubber mallet.
Step 5:
Use a level to place all the pieces appropriately. Plots are put on the
catches to help levelling the floor.
Installation steps
First of all, you must check that the bracket fulfills the minimum requirements to put the cli-ker n described above.
From that moment on youll have to follow next steps:
Step 6:
Close to walls or columns, catches should be cut with a cutter or pliers,
to join pieces and level them with that wall or column.
Step 1:
We cover the area to be paved with leveling sheet.
Step 7:
In case that it is required cutting the pieces, we will use a ceramic
cutting machine.
Once the piece is marked with ceramic cutting machine, in case of being the buttons of ceramics on the optimistic side, we will review the
trimmings with a radial provided that necessary, then through a dry
knock we split the piece.
Step 2:
Use Cintex to seal the joints between sheets.
Step 8:
When cutting the piece, we will lose the mechanized of the corner in
which to place the lock.
For these purposes we will use some plugs of polyurethane, placing
as many as necessary, fitting and sticking them on the basis of polyurethane.
Step 3:
Fix the catch on the piece that is going to be laid. Then we put the
piece on the levelling sheet placed on the floor.
* For the installation of screens on the system, it will be used a plug of polyurethane for proper fixation, protecting the ceramics with the same.
Step 4:
Repeat the process with the help of a rubber mallet to fit the pieces
until covering all the area.
48
49
exterior
Cli-ker n exterior is a new ceramic flooring system created by PORCELANOSA butech, for quick and
easy, dry installation of exterior floors. No use of mortar or joints needed.
Quick and easy installation, accessible, recoverable, wide range of finishes and minimal maintenance.. Usable
right after its installation.
Advantages

Easy installation
Clean and quick
No maintenance
No adhesives or grout needed.
Anti-slip tile
Adapted to all slopes
Wide range of finishes from PORCELANOSA
Reusable
Frost-resistants tile
Features
The use of cli-ker n exterior system is recommended when the surface to tile meets the following requirements:
Terraces with 1 slope, 2 slopes or 4 slopes, when the angles form 90 degrees.

Tile format: 44.8 x 44.8 cm

5 mm hollow joint between tiles
Machined base and pieces to allow water evacuation
Standard
UNE 10545-3
UNE 10545-4
UNE 10545-8
UNE 53130
50
Testing method
Systeme
Length
448 +/- 0,2 mm
Width
448 +/- 0,2 mm
Thickness
21 +/- 0,2mm
Water absorption
0,10%
Breaking strength
3,53 kN
Deflection
4,2 mm
Linear thermal expansion
2,5837E-05
Shore hardness polyurethane
Mthode A 92
Density (Polyurethane)
1210 kg/m3
51
Components
Steps for a successful installation
Step 1:
Cli-ker n exterior is a system that adapts to the existing slopes. We recommend that the slope lines be marked to make installation easier,
and to redefine the surface. Start installation from the lowest point.
Cli-ker n exterior base
Finishing profile
Step 2:
The tiles must be cut using a tile cutter or a radial saw. To install the
cut pieces, use the bases instead of the joining pieces.
Glue the bases to the back of the cli-ker piece with P-404 mastic.
Step 3:
When the cli-ker n exterior system finishes against a wall, column o
other obstacles that do not allow to install the joining piece, cut it
with a hand saw or radial saw.
P-404 mastic
Joining piece
Step 4:
To reduce the small level defects that might be found on the support
on which we are going to install the system, lower the base of the
cli-ker n exterior. In case you need to slightly raise the tile, place a
compensation piece on the joining piece.
Compensation piece
Plug
Pass 5:
The finishing pieces are stainless steel L profiles that will be installed over the perimeter of the surface formed by cli-ker n exterior. For
installation, cut the profile to size and fit it on the edge of the cli-ker
n exterior.
Step 6:
The finishing profile must be glued to the cli-ker n exterior piece with
P-404 mastic.
Step 7:
To allow for water evacuation, the profile must not cover the full length of the piece.
52
53
How to get a budget of a

butech system?

54
Come to one of our stores/ distributors, where you will be attended by our
professionals, who will show you the products that best suit your needs.
To provide you with the best service, you should provide us the plans of the
project and fill a study sheet customized to your product.
Once delivered the plans and the sheet correctly completed, from the Technical
Deptartment of butech, a first budget will be done.
In less than 15 days, the same professional who attended you will deliver the
budget.
In case of acceptance, and if you wish, you will receive the visit of one of our
technicians for the preparation of the final budget.
55
Showrooms
Showrooms
A CORUA
A CORUA - SUMINISTROS VIA-MAR
Avda. Finisterre, 11. T: 981 279 431
BETANZOS - SUMINISTROS VIA-MAR
Avenida Fraga Iribarne, s/n. T: 981 772 190
FERROL - NEIRA & ORTEGAL S.L.
Carretera Catabois, 258. T: 981 326 532 - F: 981 324 951
ORTIGUEIRA - NEIRA & ORTEGAL S.L.
Carretera C-642 s/n, Cuia. T: 981 400 880 - F: 981 400 883
SANTIAGO DE COMPOSTELA -PORCELANOSA
General Pardias, 13-Bajo. T: 981 569 230
SANTIAGO DE COMPOSTELA - JOS OTERO
Rua Clara Campoamor, 13-15 (Montouto)- Teo
T: 981 509 270 - F: 981 819 334
SANTIAGO DE COMPOSTELA - PORCELANOSA
Pol. Comercial Costa Vella s/n. T: 981 897 595 F:981 530 901
VIELHA - COMERCIAL RIBERA

Ctra. Frana, 40 (Mig Aran). T: 973 641 460 - F: 973 642 271
TARREGA- NOUMAG
C/Jpiter,7 (Pol. Ind. La Canaleta). T:607 497 330 - F:
Espaa
LAVA
VITORIA-GASTEIZ - JORGE FERNNDEZ
Los Herrn, 30. T: 945 254 755 - F: 945 259 668
VITORIA-GASTEIZ - JORGE FERNNDEZ
Polgono Jundiz. Paduleta, 53. T: 945 244 250 - F: 945 229 321
ALBACETE
ALBACETE - PORCELANOSA
Avda. Gregorio Arcos, 32 (Polgono Campollano)
T: 967 243 658 - F: 967 193 465
VILLAROBLEDO - OLIVARES MATERIALES DE CONSTRUCCION
Avda. Reyes Catlicos, 168. T: 967 138 105 - F: 967 138 023
ALICANTE
ALICANTE - PORCELANOSA
Pol. Las Atalayas, Parcela VI. Calle del Franco.
T: 965 109 561 - F: 965 106 965
BENISSA - HIJOS DE JUAN RIBES
Avda. de la Estacin, 2. T: 965 730 419
CALPE - HIJOS JUAN RIBES
Avenida Ejrcitos Espaoles, Edificio Apolo VII, Local 10.
T: 965 839 105
DENIA - LLACER INSTALACIONES Y SERVICIOS
Pedreguer 10-12. T: 965 781 635 - F: 965 789 821
ELCHE - PORCELANOSA
Avda. Alicante, 105 T: 966 610 676 - F: 966 610 700
JAVEA - AZULEJOS JAVEA
C/Liverpool, 4. T: 965 791 036
SAN JUAN - PORCELANOSA
Carretera Valencia, km 88. T: 965 656 200 - F: 965 655 644
TORREVIEJA - PORCELANOSA
Avda. Cortes Valencianas, 58 Esq. Crucero Baleares.
T: 966 708 445 - F: 965 718 722
ALMERA
ALMERA - PORCELANOSA
Avenida Mediterrneo, 2 tramo. T: 950 143 567 - F: 950 142 067
EL EJIDO - PORCELANOSA
Ctra. N-340, km. 411. T: 950 483 285 - F: 950 486 500
VICAR - PORCELANOSA
Centro Comercial Viapark, Parcela 1. T: 950 325 575 - F: 950 338 651
ASTURIAS
OVIEDO- PORCELANOSA
Pol.Espritu Santo C/ Dinamarca s/n. T: 985 791 526- F: 985 985 963
VILA
VILA - PAVIMARSA
Pol. industrial Vicolozano - Parcela 2. T: 920 259 820 - F: 920 259 821
BADAJOZ
MRIDA - PORCELANOSA
Avenida Reina Sofa, 8. T: 924 330 218 - F: 924 330 315
BADAJOZ - GALLERY CERAMIC
Carretera N-V Madrid-Lisboa, km 399. T: 924 229 144 - F: 924 229 143
AZUAGA - CORVILLO VERA
Pol. Industrial Parcela 5. T: 924 892 579- F: 924 890 688
LLERENA - CERAMIC
C/ Convento Santa Isabel, 2 Local Comercial. T: 924 108 318
BARCELONA
LHOSPITALET DE LLOBREGAT - PORCELANOSA
Cincies, 65. Gran Va lHospitalet. T: 932 642 500 - F: 932 007 036 CALAF - PLANELL
Ctra. Manresa Km.31 . T: 938 698 750 - F: 938 600 181
CANOVELLES - COMERCIAL MAESTRO CANET
Pol. Can Castells, nau 7-8. T: 938 466 568 - F: 938 409 216
CASSERES - MATERIALS CASSERRES
Sant Rafael. T: 938 213 770
MANRESA - PRAT MATERIALS I MAQUINARIA
C/ Mossen Jacint Verdaguer, 26. T: 938 741 903 - F: 938 741 903
NAVAS - PRAT MATERIALS I MAQUINARIA
C/ De Mujar, 52. T: 938 204 033 - F: 938 204 098
SABADELL - CASANOVA
Avda. Rafael Casanova 24 T: 937 481 015 - F: 937 274 834
ST. BOI DE LLOBREGAT - GARRO
Ctra. Sta. Creu de Calafell, km. 10,7. T: 936 545 952 - F: 938 400 620
ST. FRUITOS DE BAGS - CASANOVA
Ctra. De Manresa a Berga Km. 1. Naus 2-7.
T: 938 770 625- F: 938 776 530
56
TARADELL - JODUL
Ctra. de Vic, Km 5,8. T: 938 800 800 - F: 938 126 054
TORELL - JOAN DOT
C/ Ter, 50. T: 938 504 646 - F: 938 504 286
VILANOVA DEL CAMI - PLANELL
Ctra. Vilafranca 108-111. T: 938 060 240 - F: 938 060 239
BURGOS
MEDINA DE POMAR - CERMICA DE LAS MERINDADES
Avda. Bilbao, 11. T: 947 192 081 - F: 947 192 082
MIRANDA DE EBRO - JORGE FERNNDEZ
Camino Fuente Basilio, s/n. T: 947 323 351 - F: 947 314 589
BURGOS -BIGMAT FONTECHA
Alcalde Martn Cobos, 15. Nave 5 y 6. T: 947 483 902 - F: 947 483 941
CCERES
CCERES - PORCELANOSA
Avda. Juan Pablo II, 130. T: 927 236 337 - F: 927 236 205
MORALEJA - BIGMAT CAYUELA
Avda. Extremadura, 26. T: 927 515 198 - F: 927 147 266
PLASENCIA - ALICATADORES ROMU S.A.
Avda. del Valle, 59. T: 927 426 493 - F: 927 426 495
CDIZ
EL PUERTO DE SANTA MARA - PORCELANOSA
Pol. El Palmar. Carretera Madrid-Cdiz, km 653,2 .
T: 956 540 084 - F: 956 872 464
ALGECIRAS - PORCELANOSA
Ctra. de Mlaga, km 109. T: 956 635 282 - F: 956 635 285
JEREZ DE LA FRONTERA - PORCELANOSA
Carretera N-IV. Parque Empresarial, parcela D1.
T: 956 187 160 - F: 956 302 904
OLVERA - ALMECOR
Avda Julin Besteiro, 29. T: 956 120 776 - F: 956 120 776
SAN FERNANDO - PORCELANOSA
Polgono Tres Caminos, s/n. T: 956 592 360 - F: 956 884 677
UBRIQUE - DOCURRI
Paseo del Prado 38-40. T: 956 461 838 - F: 956 460 384
VILLAMARTIN - AZULGRIF
C/ Rosario, 9. T: 956 730 687 - F: 956 730 911
CANTABRIA
SANTANDER - PORCELANOSA
Avenida Parayas, s/n. T: 942 352 510 - F: 942 352 638
TORRELAVEGA - PORCELANOSA
Boulevard Demetrio Herrero, 1. T: 942 835 026 - F: 942 881 787
CASTELLN
CASTELLN DE LA PLANA - PORCELANOSA
Asensi, 9. T: 964 239 162 - F: 964 238 930
VILLARREAL - PORCELANOSA
Ctra.Vila-real - Puebla de Arenoso (CV- 20) Km. 0,7
T: 964 506 800 - F: 964 525 418
VINAROZ - PORCELANOSA
Carretera N-340, km 1.050,1. T: 964 400 944 - F: 964 400 650
CEUTA
CEUTA - BAEZA.
Ampliacin muelle de Poniente, 96. T: 956 511 312 - F: 956 511 309
CIUDAD REAL
CIUDAD REAL - PORCELANOSA
Carretera de Carrin, Km.1. T: 926 251 730 - F: 926 255 741
ALCAZAR DE SAN JUAN - PORCELANOSA
Corredera, 56. T: 926 546 727 - F: 926 546 727
TOMELLOSO - PORCELANOSA
Avda. de los industriales, parcela 9. (P.I. El Bombo)
T: 926 529 206 - F: 926 529 207
CRDOBA
CRDOBA - PORCELANOSA
Ctra. Nacional IV Km.404. Pol. de Torrecilla.
T: 957 760 024 - F: 957 760 123
LUCENA - FRAPECO DECO S.L.
Ejido Plaza de Toros. T: 957 509 334
POZOBLANCO - ACAIAS CABRERA
Ctra. pozoblanco-Alcaracejos Km 3,3
T: 957 772 999- F: 957 131 170
VILLA DEL RIO - JUAN PRIETO E HIJOS S.L.
Ctra. Bujalance, s/n T: 957 177 693 - F: 957 177 335
HINOJOSA DEL DUQUE - HORMIGONES SAN FRANCISCO
C/ Velzquez, 13 T: 957 140 181
SANEAMIENTO Y REVESTIMIENTOS JULIO
C/ Camino Fontanal s/n T: 957 540 943
CUENCA
CUENCA - PORCELANOSA
Hermanos Becerril, 6 bajo. T: 969 233 200 - F: 969 234 475
CASAS DE HARO - MAT. CONST. MARTINEZ ORTEGA
C/ Dos de Mayo, 28. T: 969 380 708 - F: 969 380 708
TARANCN - VICENTE DE LOS RIOS S.A.
Avda del Progreso, 19. T: 969 321 323 - F: 969 321 334
VILLANUEVA DE LA JARA - ALMACENES PAOS S.L.
Camino de Rubielos, 8. T: 967 498 000 - F: 967 498 000
GIRONA
BLANES - BRECOR SL
Ctra.Tordera,79. Blanes. T: 972 336 062 - F: 972 358 482
CORNELLA DEL TERRI - OLIVERAS

Ctra. De Girona a Banyoles Km. 12,8.
T: 972 594 131 - F: 972 594 552
ESCLANY-BEGUR - MATERIALES CREIXELL
C/Palafrugel Regencos P.I. Riera Esclanya, 1.
T: 972 300 628 - F: 972 610 772
FIGUERES - OLIVERAS
Ctra. N-II Km. 759. T: 972 672 259 - F: 972 672 255
LES PRESSES - OLIVERAS
Pol. Ind. Les Presses. Parcel.la 20.
T: 972 694 704 - F: 972 693 003
PALOL DONYAR-QUART - OLIVERAS
Ctra. Comarcal C-250 Km. 4,3. T: 972 468 119 - F: 972 468 123
GRANADA
ARMILLA - TECMACER
Avenida San Rafael. (Junto Sprinter).
T: 958 253 081 - F: 958 183 367
GUIPZCOA
SAN SEBASTIN - JORGE FERNNDEZ
Polgono Belartza. Fernando Mgika, 15.
T: 943 376 966 - F: 943 376 841
HUELVA
HUELVA - PORCELANOSA
Ctra. Trfico Pesado, s/n Pol. La Paz.
T: 959 543 600 - F: 959 234 652
HUESCA
HUESCA - PORCELANOSA
Pol. Sepes. C/ Ronda la Industria 1-3 nave C.
T: 974 242 738 - F: 974 242 676
FRAGA - BERGES CENTRO COMERCIAL
Avda. Aragn, 70. T: 974 471 439 - F: 974 471 439
AINSA - COMERCIAL CAMPODARVE
Pol. Ind. Sobrarbe, naves 11 y 12
T: 974 500 267 - F: 974 500 865
ILLES BALEARS
PALMA DE MALLORCA - PORCELANOSA
Gran Via Asima, 21 Pol. Son Castell.
T: 971 430 667 - F: 971 297 094
INCA (MALLORCA)- PORCELANOSA
C/Pagesos s/n. Pol. Inca. T: 971 507 650 - F: 971 507 656
LLUCMAJOR (MALLORCA) - MAGATZEM SES FORQUES
C/ Doctor Fleming, 10. T: 971 662 114 - F: 971 662 816
SOLLER- CAN SOLER
c/ del Mar,193. T: 971 630 219
MANACOR- GALMES
c/ Via Palma. T: 971 554 502
CALA D OR- MACODOR
Ctra. Calonge-Cala Dor. T: 971 658 210
ANDRAITX - TUCASA
C/ Habana. T: 971 136 476
SANT ANTONI DE PORTMANY (IBIZA)- PORCELANOSA
Pol. Monte Cristo, s/n. Ctra. Ibiza. T: 971 317 292 - F: 971 317 293
JAN
JAN - PORCELANOSA
Polgono Olivares. Carretera Bailn-Motril, km 323.
T: 953 280 757 - F: 953 284 035
ALCALA LA REAL - PAVIMENTOS AZUGRISA
Polgono Ind. Fte. Granada.Vial II. T: 953 582 963
BEAS DE SEGURA - GRUPO PEREA MORANTE S.L.
Polgono El Cornicabral, parcela 517 T: 953 424 565
HUELMA - VIFERSAN S.L.
C/ Virgen de la Fuensanta, 61. T: 953 391 413
LINARES - HERNNDEZ GMEZ S.L.
Ctra. Torreblascopedro, s/n. T: 953 693 423 - F: 953 693 444
BEDA - HERNANDEZ GAMEZ
Avenida de la libertad, 88. T: 953 795 168 - F: 953 795 168
VILLACARRILLO - MAT. CONST. Y SAN. HIJOS MARTIN SANCHEZ
C/ Jos Rodero Mataran, 53. T: 953 454 167
LA RIOJA
LOGROO - RIOJACER
Avenida de Burgos, 43-45. T: 941 286 021 - F: 941 202 271
LAS PALMAS
LAS PALMAS DE GRAN CANARIA - PORC. Y PAV. CANARIOS
Avenida Mesa y Lpez, 63. T: 928 472 949 - F: 928 472 944
LEN
SAN ANDRS DE RABANEDO - PORCELANOSA
Ctra Len-Astorga, km 3,5. - San Andrs de Rabanedo T: 987 801 570 - F: 987 801 475
LLEIDA
EL PONT DE SUERT - PRETENSADOS RIBERA
Ctra. N-230 Km. 124,5. T: 973 690 063 - F: 973 690 400
LA SEU DURGEL - MATERIALS PIRINEU
Ctra. de Lleida, 28. T: 973 351 850 - F: 973 353 410
LLEIDA - PUJOL ELEMENTS
Ctra. Tarragona Km 40. T: 973 202 350 - F: 973 203 113
GOLMES - ARCIAR
Avda Mediterranea, 40-44 Pol. Golparc
T: 973 601 589 - F: 973 711 448
Espaa
LUGO
FOZ - ALMACENES BAHA
Maestro Lugilde, 6. T: 982 140 957
LUGO - ARIAS NADELA
Tolda de Castilla, s/n. T: 982 245 725
XOVE - ESTABLECIMIENTOS REY,S.L.
Avda. Diputacin, 88 T: 982 592 006 - F:982 592 071
MADRID
LEGANS - PORCELANOSA
Avda. Recomba, 13. Pol. la Laguna Salida 53 - M50.
T: 914 819 200 - F: 916 930 292
ALCOBENDAS - PORCELANOSA
Parque Ro Norte. T: 916 623 232 - F: 916 624 607
ALCORCN - PORCELANOSA
Ctra. N-V, km 15,5. Parque Oeste de Alcorcn.
T: 916 890 172 - F: 916 890 170
MADRID - PORCELANOSA
Ortega y Gasset, 62. Esquina Conde Pealver.
T: 914 448 460 - F: 914 025 111
MADRID - PORCELANOSA
Alcal, 514. T: 917 545 161 - F: 917 545 555
MLAGA
MLAGA - PORCELANOSA
Avda. Velzquez, 77. T: 952 241 375 - F: 952 240 092
ANTEQUERA - PORCELANOSA
Ro de la Villa, 3. Pol. Industrial. T: 952 701 819 - F: 952 843 751
MARBELLA - PORCELANOSA
Avda. Ricardo Soriano, 65. T: 952 826 868 - F: 952 822 880
MURCIA
MURCIA - PORCELANOSA
Avda. Juan de Borbn, s/n. Parque Comercial Thader.
T: 968 879 527 - F:968 831 725
CARAVACA DE LA CRUZ - PORCELANOSA
Avenida Ctra. Granada, 20. T: 968 705 647 - F: 968 705 648
CARTAGENA - PORCELANOSA
C/ Belgrado. Parcela 81. Pol. Ind. Cabezo Beaza.
T: 968 529 302 - F: 968 528 362
LORCA - PORCELANOSA
Ctra. de Granada, 127. Polgono Los Peones.
T: 968 478 130 - F: 968 470 820
YECLA - PORCELANOSA
Avenida de la Paz, 195. T: 968 718 048 - F: 968 718 048
NAVARRA
MULTIVA BAJA - MONTEJO CERMICAS
Pol. Ctra. Tajonar, Calle 2, Naves 2-4.
T: 948 239 065 - F: 948 230 503
CINTRUNIGO - CERMICAS CECILIO CHIVITE
Pol. Ind. s/n. Variante N-113. T: 948 811 973 - F: 948 815 249
PAMPLONA - MONTEJO CERMICAS
Navas de Tolosa, s/n. T: 948 224 000 - F: 948 226 424
TUDELA - MONTEJO CERMICAS
Ctra. Tudela -Tarazona, Pol. Centro de Servicios de Tudela.
T: 948 848 365- F: 948 848 573
OURENSE
OURENSE - BLANCO QUINTAS
C/ Nosa Seora da Sainza, 48. T: 988 391 114 - F: 988 250 413
CARBALLIO - JOSE R. PITEIRA,S.L.
Avda. Julio Rodriguez Soto,63. T: 988 271 071 - F: 988 274 780
PALENCIA
PALENCIA - CANTALAPIEDRA
C/ La Puebla,2. T: 979 706 421 - F: 979 702 652
PONTEVEDRA
DENA - PREFABRICADOS DENA S.L.
Rua Galicia, 24 T: 986 743 121
SEIXO, MARN - SANEAMIENTOS ROSALES
Avenida Doctor Otero Ulloa, 1. T: 986 702 041 - F: 986 702 080
O GROVE - PREFABRICADOS DENA S.L.
C/Alexandre Boveda,82 T: 986 733 230 - F: 986 733 415
LALN - ALMACENES CANDA, S.L.
Calle Monserrat, 36-39 - B. T: 986 780 184 - F: 986 782 301
MOS- BLANCO QUINTAS, S.L.
Monte Faquia s/n - B. T: 986 288 041 - F: 986 486 316
VIGO - SANEAMIENTOS ROSALES
Garca Barbn, 139 - B. T: 986 228 806
SALAMANCA
SALAMANCA - PORCELANOSA
Pol. Villares. Ctra. Salamanca - Valladolid, km 2,5.
T: 923 243 811 - F: 923 123 414
SANTA CRUZ DE TENERIFE
SANTA CRUZ DE TENERIFE - PORC. Y PAV. CANARIOS
Avda. 3 de Mayo, 18. T: 922 209 595 - F: 922 209 596
LOS LLANOS DE ARIDANE - AFELSA
Las Rosas, s/n. T: 922 461 112 - F: 922 461 166
SANTA CRUZ DE LA PALMA - AFELSA

Abenguareme, 3. T: 922 412 143 - F: 922 420 012
Parque Cial. Puerto Venecia. T: 976 930 800 - F: 976 930 603
SEGOVIA
EL ESPINAR - SEGOCER
Carretera Madrid - La Corua, km 64.
T: 921 172 426 - F: 921 171 828
SEGOVIA - SEGOCER
Jos Zorrilla, 134. T: 921 444 122
SEVILLA
SEVILLA - PORCELANOSA
Pol. Ind.La Negrilla. C/ Tipografa,2.(Autova A-92 Mlaga-Granada) T: 954
260540 - F: 954 261 391
DOS HERMANAS - PORCELANOSA
Parque Cial., Zona 2. Doctor Fleming, Sector 13, Parcela 3.
T: 955 661 368 - F: 955 661 368
LORA DEL RO - HERNNDEZ CARBALLO S.L.
C/ Betis s/n. T: 955 800 473 - F: 955 801 439
TOMARES - PORCELANOSA
San Roque, s/n. Polgono El Manchn.
T: 954 152 792 - F: 954 153 188
SORIA
SORIA - MAT. CONSTRUCCIN ODORICIO S.L.
Polgono las Casas-II. Calles A y J, Parcela 201.
T: 975 233 228 - F: 975 232 188
TARRAGONA
CAMBRILS - MONSERRATE ESTIL CERAMIC SL
Pol. Ind. Belianes nau 5 Ctra. Cambrils-Montbri.
T: 977 364 900 - F: 977 364 953
ALCOVER - EXPOMAT
C/ Tramuntana, s/n (pol. Roques Roges)
T: 977 760 476 - F:
EL VENDRELL - VIUDA DE ANTONIO FONT
C/ Valls, 12. T: 977 660 794 - F: 977 662 217
REUS - COMERCIAL STC
C/Pz de les Oques, 8. T: 977 31 25 02 - F: 977 317 211
RODA DE BARA - CONSTRUCCIONS CIURO
Acceso a Roda de Bara Km. 1. T:977 802 951 - F:977 802 012
VALLS - RAMN MAGRIA BATALLA
C/ Montblanc 14. T:977 600 210 - F:977 603 302
TORTOSA - MATERIALS GISBERT
Ctra. Gandesa Km 3,5. T:977 500 306 - F:977 501 550
TERUEL
TERUEL - GARGN
Polgono La Paz, Parcela 143-149. T: 978 609 661
TOLEDO
TOLEDO - PORCELANOSA
Pol.Ind.Sta. Mara de Benquerencia, C/del Ro Marchs,123
T: 925 232 402 F:925 232 406
ILLESCAS - PORCELANOSA
Ctra. A-42 Km. 32 T: 925 532 011 F:925 513 055
VALENCIA
ALBUIXECH - PORCELANOSA
Avda. Mediterrneo, Parcela 6. Pol. Ind. del Mediterrneo.
T: 96 141 7227-F: 961 401 078
GANDA - PORCELANOSA
Zona Cial. La Vital, Avda de la Vital, 43-A
T: 962 954 105 - F: 962 965 980
PATERNA - PORCELANOSA
Zona Cial. Heron City, Pista Ademuz, S. 6-7 - Calle V-1. Parc.1 Sec.14.
T: 963 160 348 - F: 963 160 599
SEDAV - PORCELANOSA
Avenida Mediterrneo. Zona Cial. de Sedav.
T: 963 185 021 - F: 963 180 094
VALENCIA - PORCELANOSA
Coln, 56. T: 963 530 230 - F: 963 531 688
VALLADOLID
VALLADOLID - CANTALAPIEDRA
Carretera de Soria A-24, km 5,5. T: 983 217 010 - F: 983 200 921
VIZCAYA
AMOREBIETA - BILBU
Barrio Boroa, s/n. T: 946 731 158 - F: 946 733 265
BILBAO - BILBU
Iturriaga, 78. T: 944 113 018 - F: 944 128 637
BILBAO - BILBU
Alameda Recalde, 39 - 41. T: 944 218 625 - F:944 218 879
ZAMORA
ZAMORA - PORCELANOSA
Avenida Cardenal Cisneros, s/n. T: 980 519 283 - F: 980 529 404
ZARAGOZA
ZARAGOZA - PORCELANOSA
Autova de Logroo, km 2. T: 976 403 131 - F: 976 300 094
Plataforma Logstica PLA-ZA. C/ Taormina, 2.
T: 876 269 500 - F: 876 269 389
57
Showrooms
Showrooms
ALBANIA
TIRANA - ALBA CERAMICA PORCELANOSA GRUPO
T: +355 42233817 - F: +355 42233817
TIRANA - ALBA CERAMICA
T: +355 48300084 - F: +355 48300084
T: +86 577 8872 8111 - F: +86 577 8971 2066

WUHAN - HENG HUI BUILDINGS MATERIALS
T: +86 27 8388 9169 - F: +86 27 8398 4795
XIAN - WEI YANG BAO LU SHA BUILDINGS MATERIALS
T: +86 29 8612 2404 - F: +86 29 8612 2404
XIANMEN - PO YICK CERAMIC TILES
T: +86 2952 3755123 - F: +86 591 88055823
international
ALEMANIA
ASCHAFFENBURG - KALKWERKE
T: +49 (0) 60 213 601 62 - F: +49 (0) 60 213 602 93
BAD SALZUFLEN - W. LINNENBECKER GmbH
T: +49 (0) 5222 / 5301 221 - F: +49 (0) 5222 / 5301 209
BAUTZEN - FLIESEN LEHMANN GmbH
T: +49 (0) 3591 / 3726 32 - F: +49 (0) 351 / 8931420
BEESKOW-BADERBAUSTOFFE&WERKZEUGE,HANDELSGESELLSCHAFTT:GmbH+49 (0) 3366 /
417 0 - F: +49 (0) 3366 / 417 90
BERGISCH GLADBACH - SCHMIDT RUDERSDORF GmbH & Co
T: +49 (0) 2204 / 4007 0 771 - F: +49 (0) 3320 / 854715
BERLIN - W. LINNENBECKER GMBH & CO. KG
T: +49 (0) 30 / 756 888 - F: +49 (0) 30 / 756 88 756
BERLIN - FLIESENPARADIES GLAESKE + SEFZIG GMBH
T: +49 (0) 30 650 737 0 - F: +49 (0) 30 650 737 34
BERLIN - BERLINER FLIESENMARKT GMBH
T: +49 (0) 30 326 725 10 - F: +49 (0) 30 326 725 58
BONN-BUSCHDORF - SCHMIDT-RUDERSDORF
T: +49 0228 55916-0 - F:
BOFFZEN - HERMANN BACH GMBH & CO. KG
T: +49 (0) 5271 / 955 251 - F: +49 (0) 5271 / 955 200
BOTTROP - W. LINNENBECKER GMBH & CO. KG
T: +49 (0) 2041 / 7958 13 - F: +49 (0) 2041 / 7958 10
BRUCHSAL - TAXIS - BRUCHSAL
T: +49 (0) 72 518 005 0 - F: +49 (0) 72 518 005 40
BURGSTDT - FLIESEN THOMAS FLIESENGROHANDEL GMBH
T: +49 (0) 3724 / 1856 0 - F: +49 (0) 3724 / 1856 70
CRAILSHEIM - TAXIS - CRAILSHEIM
T: +49 (0) 7951 301 0 - F: +49 (0) 7951 301 100
DORTMUND - W. LINNENBECKER GMBH & CO. KG
T: +49 (0) 231 / 562 090 22 - F: +49 (0) 231 / 562 090 88
ELTERLEIN - FLIESNHAUS MULLER
T: +49 (0) 37349 / 7305 - F: +49 (0) 37349 / 6093
ERFURT - FLIESENZENTRUM ERFURT
T: +49 (0) 361 427070 - F: +49 (0) 361 4270777
ERKRATH - W. LINNENBECKER GMBH
T: +49 (0) 211 / 92503 19 - F: +49 (0) 211 / 92503 34
FRANKFURT - J. N. KBIG GMBH - FRANKFURT
T: +49 (0) 69 959 645 5 - F: +49 (0) 69 959 645 79
FREIBURG - GTZ & MORIZ GMBH
T: +49 (0) 76 145 180 - F: +49 (0) 76 145 711 2
FULDA - OSWALD KERAMIK UND STEIN GMBH
T: +49 (0) 66 194 151 0 - F: +49 (0) 66 194 151 40
GERA - BAUSTOFFE GEBR.LFFLER GMBH
T: +49 (0) 365 430 701 9 - F: +49 (0) 365 430 701 4
GRLITZ - FLIESEN-PEDERSEN GMBH
T: +49 (0) 3581 / 402809 - F: +49 (0) 3581 / 409166
HAMBURG - LURUP - CROONEN FLIESENHANDEL GMBH
T: +49 (0) 40 / 83383 377 - F: +49 (0) 40 / 83383 301
KARLSTADT - FLIESEN GEHRET
T: +49 (0) 93 539 731 0 - F: +49 (0) 93 539 731 26
KEHL / RHEIN - TAXIS - KEHL
T: +49 (0) 78 519 383 16 - F: +49 (0) 78 519 383 20
KOBLENZ - J. N. KBIG GMBH - KOBLENZ
T: +49 (0) 26 198 169 20 - F: +49 (0) 26 198 169 10
KRANICHFELD - MHL 24 - KRANICHFELD
T: +49 (0) 36 450 330 - F: +49 (0) 36 450 332 89
LEVERKUSEN-BUSCHDORF - SCHMIDT-RUDERSDORF
T: +49 02 14 - 8 68 13 0 - F:+49 02 14 - 8 68 13 13
LBNITZ - SACHSENKERAM GBR
T: +49 (0) 34208 / 7400 - F: +49 (0) 34208 / 7400
LBECK - HEINRICHS FLIESENMARKT
T: +49 (0) 451 8966693 - F: +49 (0) 451 8973494
MAINZ - J. N. KBIG GMBH - MAINZ
T: +49 (0) 61 313 942 27 - F: +49 (0) 61 316 942 75
MESCHEDE - W. LINNENBECKER GMBH & CO. KG
T: +49 (0) 291 / 952 82 21 - F: +49 (0) 291 / 952 82 82
MNCHEN - CERAMICAS OHG
T: +49 (0) 89 318 280 0 - F: +49 (0) 89 318 280 20
MNSTER - W. LINNENBECKER GMBH & CO. KG
T: +49 (0) 251 / 979 12 21 - F: +49 (0) 251 / 979 1220
NORDHAUSEN - HERMANN BACH GMBH & CO. KG
T: +49 (0) 3631 / 633 126 - F: +49 (0) 3631 / 633 143
NRNBERG/HAFEN - HEINRICH CHRIST GMBH & CO. KG
T: +49 (0) 91 164 318 0 - F: +49 (0) 91 164 318 50
PLAUEN - MATTHIAS SCHUH
T: +49(0) 374 1203 881
POTSDAMOTFAHRLAND-KERANAKERAMIK-GMBH
T: +49 (0) 33208 / 547 16 - F: +49 (0) 33208 / 547 15
RADEBEUL - FLIESEN EHRLICH & CO. GMBH
T: +49 (0) 351 / 89314 10 - F: +49 (0) 351 / 89314 20
REUTLINGEN - TAXIS - REUTLINGEN
T: +49 (0) 71 219 884 0 - F: +49 (0) 71 219 884 40
RONNENBERG / EMPELDE - W. LINNENBECKER GMBH & CO. KG
T: +49 (0) 511 / 438 90 36 - F: +49 (0) 511 / 438 90 49
SCHRAMBERG - SULGEN - ARMBRUSTER GMBH
T: +49 (0) 7422 28008-0 - F: +49 (0) 7422 28008-20
STUHR-MOORDERCH - NORBERT BANG
T: +49 (0) 42 156 591 78 - F: +49 (0) 42 156 591 79
STUTTGART - TAXIS - STUTTGART
T: +49 (0) 71 189 003 121 - F: +49 (0) 71 189 003 104
VLKLINGEN - NIEDERER GMBH
T: +49 (0) 68 989 802 21 - F: +49 (0) 68 989 802 30
VS-SCHWENNINGEN - TAXIS - SCHWENNINGEN
T: +49 (0) 77 206 927 0 - F: +49 (0) 77 206 927 35
WEINSBERG - BSF BAU CENTER GMBH
T: +49 (0) 71 349 130 - F: +49 (0) 71 349 131 00
58
WIESBADEN-BIEBRICH - J. N. KBIG GMBH - WIESBADEN

T: +49 (0) 611 27810 - F: +49 (0) 611 25674
WRSELEN - SCHMIDT-RUDERSDORF
T: +49 (0) 24 05 - 41 38 50 - F:+49 (0) 24 05 - 41 38 55
ZWETHAU - GRAMER GMBH
T: +49 (0) 3421 / 7327 18 - F: +49 (0) 3421 / 7326 73
ANGOLA
LUANDA-PORCELANOSA ANGOLA
T: +244931173551 - F: +244222372374
ARABIA SAUD
JEDDAH - MANART AL ANDALOS EST
T: +966 2 629 3402 - F: +966 2 629 3416
RIYADH - MANART AL ANDALOS EST
T: +966 1 282 1500
ARGELIA
ALGER - NOVACASA
T: +00213 2121 1939 - F: +00213 2121 1939
ARGENTINA
BUENOS AIRES - NESTOR O. MACAGNO
T: +54 11 477 630 08 - F: +54 11 477 630 08
BUENOS AIRES - BLAISTEN S.A.
T: +54 11 463 620 00 - F: +54 11 463 614 86
MAR DEL PLATA - IMEPHO S.A.
T: +54 02 234 813 827 - F: +54 02 234 813 827
MENDOZA - VICTOR JOSE GULLO
T: +54 26 143 142 00 - F: +54 26 143 142 00
ARMENIA
YEREVAN - SACO & ARARAT-SALON BOMOND
T: +37 410 55 08 99 - F: +37 410 51 75 81
AUSTRALIA
OCEANIA:
AUSTRALIAN REPRESENTATIVE - AUSTRALIAN FACTORY REPRESENTATIVE
T: +61 8 81186244 - F: +61 8 8118 6220
NEW SOUTH WALES:
NEWCASTLE WEST - EARP BROS
T: +61 2 4925 4555 - F: +61 2 4929 4932
SYDNEY - EARP BROS
T: +61 2 4962 5500 - F: +61 2 9410 2011
QUEENSLAND:
BRISBANE - TILESCOPE IMPORTS
T: +61 7 3371 5777 - F: +61 7 3371 5133
SUNSHINE COAST - BRISBANE - ACE STONE & TILES
T: +61 7 5493 3344 - F: +61 7 5493 3117
BRISBANE - MAJER TILES
T: +61 7 3852 4444 - F: +61 7 3852 4344
SOUTH AUSTRALIA:
ADELAIDE - ITALIA CERAMICS
T: +61 8 8336 2366 - F: +61 8 8336 9016
TASMANIA:
HOBART - ROSSETTO TILING
T: +61 3 6231 2931 - F: +61 3 6231 5783
LAUNCESTON - ROSSETTO TILING
T: +61 3 6326 4955 - F: +61 3 6326 6003
VICTORIA:
MELBOURNE - EARP BROS
T: +61 3 9328 8598 - F: +61 3 9348 9996
WESTERN AUSTRALIA:
PERTH - CERAMO
T: +61 8 9445 1777 - F: +61 8 9446 3127
AUSTRIA
GRAZ - FLIESEN TENNE
T: +43 316 262 524 0 - F: +43 316 262 524 22
GRAZ - TENNE
T: +43 316 26 25 24 - F: +43 316 26 25 24-22
BADKULT-NORT - TENNE WIEN 22
T: +43 1 20 20 520 - F: +43 1 20 20 520-20
BRUCK - TENNE
T: +43 3862 588 44 - F: +43 3862 588 44-22
LEIBNITZ - TENNE KINDERMANN BAD & HEIZTECHNIK
T: +43 3452 707-65 - F: +43 3452 707-29
LINZ - BEINKOFER
T: +43 732 776 543 0 - F: +43 732 776 543 60
SALZBURG - STURMBERGER KERAMIKAGENTUR
T: +43 662 879 322 - F: +43 662 872 389
VSENDORF - TENNE
T: +43 1 699 33 33 - F: +43 1 699 33 33-22
AZERBAIYN
BAKU - AKSESUAR PORCELANOSA GRUPO
T: +994 12 5962548/+994 12 4973103 - F: +994 12 4474383
BAKU - AKSESUAR INSAAT
T: +994 12 4409970/+994 12 4403145 - F: +994 12 4403145
BANGLADESH
DHAKA - SAS PROGRESSIVE CO.
T: +88-02-8813796 - F: +88-02-8713501
BAHRIN
MANAMA - AL ABBAS GALLERY
T: +973 741 919 - F: +973 741 747
BLGICA
HEIST-OP-DEN-BERG - PGB CERAMICA NV
T: +32 (0) 15 253366 - F: +32 (0) 15 253367
BERMUDAS
PEMBROKE - PEMBROKE TILE & STONE Co. LTD
T: +441 292 8453 - F: +441 295 8453

BIELORRSIA
GOMEL - POLCAR IMPEX
T: +375 2327 76919 - F: +375 2327 76757
MINSK - POLCAR IMPEX
T: +375 1721 78785 - F: +375 1721 75632
MINSK - INTERIOR HALL DOMIART
T: +375 1725 96026 - F: +375 1725 96212
BOLIVIA
SANTA CRUZ - ELEMENTO DISEO & ARQUITECTURA
T: +591 3 364 7313 - F: +591 3 347 6226
BOSNIA Y HERZEGOVINA
CITLUK - BROTIS d.o.o.
T: +387 633 21500 - F: +387 366 50950
Sarajevo - Luk d.o.o.
T: +387 33 777 888 - F: +387 33 777 889
BANJA LUKA - Luk d.o.o.
T: +387 51 379 261/262 - F: +387 51 370 877
BIJELJINA - Luk d.o.o.
T: +387 55 228 100 - F: +387 55 228 101
BRASIL
PARAN - CAMPO LARGO - PORCELANOSA BRASIL REVESTIMENTOS LTDA
T: +55 (41) 3392 1500 - F: +55 (41) 3392 1400
SAO PAULO - TELHANORTE - Saint Gobain
T:+55 11 2139 9650 9655 F:+55 11 2139 9655
BULGARIA
BURGAS - ELIS G.
T: +359 56 842 849
PETRICH - NIKMAR
T: +359 886 321 111 - F: +359 745 665 03
SANDANSKI - NIKMAR
T: +359 888 143 313
SOFIA - NIKMAR
T: +359 2 868 93 95
SOFIA - NIKMAR
T: +359 888 143 313
SOFIA - ELIS-GE EOOD
T: +359 2 860 60 60
VARNA- ELIS-GE EOOD
T: +395 52 500 555
CAMBOYA
PHNOM PENH - UY HOUT MODERN CERAMIC TILES
T: +855 23 210658 - F: +855 11 307777
CAMERN
DOUALA - NOUVEAUX AFFAIRES S.A.R.L.
T: +237 33 92161 - F: +237 34 32917
CANAD
BRITISH COLUMBIA:
VANCOUVER - FONTILE DISTRIBUTORS
T: +604 683 9358 - F: +604 683 6758
NEW BRUNSWICK:
MONCTON - DOMINION TILE & SUPPLIES
T: +506 857 8906 - F: +506 857 4149
ONTARIO:
WOODBRIDGE - STREAMLINE SALES & MARKETING INC.
T: +905 850 1508 - F: +905 850 1509
CHILE
SANTIAGO DE CHILE - BUDNIK HERMANOS S.A.
T: +562 398 0100 - F: +562 212 3058
CHINA
BEIJING - PO YICK BUILDING MATERIALS CO. LTD
T: +86 10 8527 1313 - F: +86 10 6422 9976
CHENGDU - DE HUA SANITARYWARE
T: +86 28 8775100181 - F: +86 28 8774721681
CHONGQUING - YAO CHENG BUILDING MATERIALS
T: +86 23 86358360 - F: +86 23 86357182
DALIAN - PO YICK CERAMIC TILES
T: +86 411 8230 1911 - F: +86 411 8230 1911
FUZHOU - PO YICK CERAMIC TILES
T: +86 591 8805 5823 - F: +86 591 8805 5823
GUANGZHOU - PO YICK DECORATION AND DESIGN (FAFA)
T: +86 20 2200 8228 - F: +86 20 8252 4902
GUANGZHOU - PO YICK DECORATION AND DESIGN (MAFO)
T: +86 20 8071 8223- F: +86 20 8701 8226
HAIKOU - XIN HUA XIN BUILDINGS MATERIALS
T: +86 898 6532 2417 - F: +86 898 6533 4893
HANGZHOU - MING OU BUILDING MATERIALS
T: +86 571 8658 2691 - F: +86 571 8658 2691
KUNMING - BE NEW FORM BUILDING MATERIALS
T: +86 871 466 9550 - F: +86 871 466 9550
QUINDAO - TOLI SPACE MATERIALS
T: +86 532 80995657 - F: +86 532 80995657
SHANGHAI - PO YICK DECORATION AND DESIGN
T: +86 21 6438 3735 - F: +86 21 6428 1607
SHENYANG - PO YICK CERAMIC TILES
T: +86 24 8563 7137 - F: +86 24 8563 7137
SHENZHEN -PO YICK BUILDING MATERIALS (HONGHU LU)
T: +86 755 2562 0359 - F: +86 755 2550 5297
SHENZHEN - PO YICK BUILDING MATERIALS (BAILIMA)
T: +86 755 8240 7728 - F: +86 755 8240 7738
TIANJIN - OU LIN HUI BUJILDING MATERIALS
T: +86 22 23528765 - F: +86 22 88277023
WENZHOU - MING HOME INTERNATIONAL MATERIALS CO. LTD
international
CHIPRE
LIMASSOL-THEENGINEERINGANDCOMMERCIALASSOCIATION(EKA)
T: +357 2585 4444 - F: +357 2585 4545
GIRNE - MEPAS LTD
T: +9039 28152964 - F: +9039 28155651
COLOMBIA
BOGOT - PROSEIN
T: +57 743 5566
BOGOT - DECORCERAMICA
T: +57 1 625 4439- F: +57 1 615 2554
T: +57 1 742 7690- F: +57 1 742 3983
T: +57 1 747 0555- F: +57 1 621 1197
CALI - DECORCERAMICA
T: +57 2 330 1124 - F: +57 2 330 1997
T: +57 2 668 9535 - F: +57 2 661 8063
MEDELLIN - DECORCERAMICA
T: +57 4 604 5888- F: +57 4 604 5888
BARRANQUILLA - D.I.M.C.E.
T: +57 5 300 6208 - F:+57 4 604 5888
CONGO, REPBLICA DEMOCRTICA
KINSHASA - SOCIETE PANACHE
T: +243 884 1677 - F: +243 983 13893
COREA DEL SUR
SEOUL - T&S TRADING CO. LTD
T: +82 2 5163123 - F: +82 2 5163009
COSTA RICA
SAN JOS - FERNANDEZ AGUILAR S.A.
T: +506 2222 5674 - F: +506 221 9952
CROACIA
DUBROVNIK - OTP DUBROVNIK
T: +385 20 412478 - F: +385 20 311521
POREC - SPINA
T: +385 52 451 348 - F: +385 52 434 005
PULA - SPINA
T: +385 52 219 002 - F: +385 52 219 118
RIJEKA - SPINA
T: +385 51 741 300 - F: +385 51 741 298
SPLIT - CREDO CENTAR
T: +385 21 476 333 - F: +385 21 476 332
SPLIT - SPINA
T: +385 21 668 991 - F: +385 21 668 992
VARAZDIN - SPINA
T: +385 42 303 707 - F: +385 42 303 709
ZAGREB - SPINA
T: +385 13 492 552 - F: +385 13 492 560
DINAMARCA
GLOSTRUP - MOSAIKHJORNET
T: +45 43 633 900 - F: +45 43 663 857
ODENSE M - DANESP FLISE KOMPAGNIET APS
T: +45 66 173 221 - F: +45 66 173 821
COPENHAGUEN S - GENESTHO APS
T: +45 53 354 242
ECUADOR
GUAYAQUIL - ARKETIPS CA
T: +593 422 467 52 - F: +593 422 403 96
QUITO - ARKETIPS CA
T: +593 422 498 39 - F: +593 225 573 99
EGIPTO
EL CAIRO - MAHGOUB TRADING & IMPORTING
T: +20 2 57 12 565 - F: +20 2 57 39 344
EMIRATOS RABES UNIDOS
ABU-DHABI - GALAXY BUILDING MATERIALS TRADING
T: +971 2 632 0333 - F: +971 2 632 2242
ESLOVAQUIA
BRATISLAVA - CERSA DOO
T: +4212 44442833 - F:
ESLOVENIA
LJUBLJANA - KEOR d.o.o.
T: +386 1 542 14 86 - F: +386 1 542 14 88
MARIBOR - KEOR d.o.o.
T: +386 2 480 54 15 - F: +386 2 471 06 33
MARIBOR - MAVI d.o.o.
T: +386 2 23 50 316 - F: +386 2 23 50 312
ESTADOS UNIDOS
CALIFORNIA:
ANAHEIM - PORCELANOSA ANAHEIM
T: +1 714 772 3183 - F: +1 714 772 9851
SAN FRANCISCO - PORCELANOSA SAN FRANCISCO
T: +1 415 593 7763 - F: +1 714 772 985
SAN FRANCISCO - PORCELANOSA WEST HOLLYWOOD
T: +1 310 300 2090 - F: +1 310 300 2095
SAN JOSE - PORCELANOSA SAN JOSE
T: +1 408 467 9400 - F: +1 408 467 9410
BEVERLY HILLS - PORCELANOSA BEVERLY HILLS
T: +1 714 772 3183

CONNECTICUT:
RIVERSIDE - PORCELANOSA RIVERSIDE
T: +1 203 698 7618 - F: +1 203 698 7619
FLORIDA:
MIAMI - PORCELANOSA MIAMI
T: +1 305 715 7153 - F: +1 305 592 6999
POMPANO BEACH - PORCELANOSA POMPANO BEACH
T: +1 954 968 7666 - F: +1 954 968 7699
GEORGIA:
ATLANTA - PORCELANOSA ATLANTA
T: +1 305 715 7153
ILLINOIS:
CHICAGO - PORCELANOSA CHICAGO
T: +1 312 204 6220 - F: +1 312 204 6240
MARYLAND:
ROCKVILLE - PORCELANOSA ROCKVILLE
T: +1 301 294 8193 - F: +1 301 294 8194
NEW JERSEY:
EAST BRUNSWICK - PORCELANOSA EAST BRUNSWICK
T: +1 732 613 1915 - F: +1 732 613 9181
PARAMUS - PORCELANOSA PARAMUS
T: +1 201 712 0556 - F: +1 201 599 1520
RAMSEY - PORCELANOSA RAMSEY
T: +1 201 995 1310 - F: +1 201 995 1960
NEW YORK:
NEW YORK - PORCELANOSA NYDC
T: +1 212 252 7370
WESTBURY - PORCELANOSA WESTBURY
T: +1 516 338 0097 - F: +1 516 338 0098
TEXAS:
DALLAS - PORCELANOSA DALLAS
T: +1 214 377 2327 - F: +1 214 234 1340
EL SALVADOR
SAN SALVADOR-FERRETERIA DE LA CONSTRUCCIN FERCO
T: 503 2510 8888 - F: 503 2510 8810

ESTONIA
TALLINN - PLAADIPUNKT
T: +372 650 0720 - F: +372 650 0723
FILIPINAS
MANILA - CASA EUROPA
T: +632 519 5818 - F: +632 553 2446
FINLANDIA
VANTAA - LAATTAPISTE OY
T: +358 9 878031 - F: +358 9 890832
France
ALSACE ET LORRAINE:
VENDENHEIM - PORCELANOSA STRASBOURG
T: +33 (0)388 209 212 - F: +33 (0)388 209 107
WITTENHEIM - PORCELANOSA MULHOUSE
T: +33 (0)389 570 260 - F: +33 (0)389 570 261
AQUITAINE:
MERIGNAC - PORCELANOSA BORDEAUX
T: +33 (0)556 124 848 - F: +33 (0)556 124 849
BASSE NORMANDIE:
MONDEVILLE - PORCELANOSA CAEN
T: +33 (0)231 820 000 - F: +33 (0)231 820 019
BOURGOGNE:
CHENVE - PORCELANOSA DIJON
T: +33 (0)380 588 701 - F: +33 (0)380 588 595
BRETAGNE:
BREST - PORCELANOSA BREST
T: +33 (0)298 025 100 - F: +33 (0)298 415 401
LORIENT - PORCELANOSA LORIENT
T: +33 (0)297 875 000 - F: +33 (0)297 370 607
SAINT GRGOIRE - RENNES - PORCELANOSA RENNES
T: +33 (0)223 200 808 - F: +33 (0)299 369 688
VANNES - PORCELANOSA VANNES
T: +33 (0)297 460 292 - F: +33 (0)297 461 210
CENTRE:
CHAMBRAY LES TOURS - PORCELANOSA TOURS
T: +33 (0)247 808 787 - F: +33 (0)247 808 789
OLIVET - PORCELANOSA ORLEANS
T: +33 (0)238 496 961 - F: +33 (0)238 496 969
CORSE:
AJACCIO - ART ET STYLES
T: +33 (0)495 221 999 - F: +33 (0)495 231 547
BIGUGLIA - ART ET STYLES
T: +33 (0)495 589 898 - F: +33 (0)495 305 318
FRANCHE COMT:
BESANON - PORCELANOSA BESANON
T: +33 (0)381 416 363 - F: +33 (0)381 416 369
HAUTE NORMANDIE:
SOTTEVILLE LES ROUEN - PORCELANOSA ROUEN
T: +33 (0)235 650 655 - F: +33 (0)235 650 656
LE DE FRANCE:
ARCUEIL - PORCELANOSA PARIS PORTE DORLEANS
T: +33 (0)149 121 257 - F: +33 (0)149 121 258
COIGNIERES - PORCELANOSA COIGNIERES
T: +33 (0)130 491280 - F: +33 (0)130 491328
MONTIGNY - LES CORMEILLES - PORCELANOSA MONTIGNY
T: +33 (0)139 311979 - F: +33 (0)139 311492
VERT SAINT DENIS - PORCELANOSA MELUN
T: +33 (0)160 565 747 - F: +33 (0)160 569 080
LANGUEDOC - ROUSSILLON:
NMES - PORCELANOSA NMES
T: +33 (0)466 282 780 - F: +33 (0)466 282 781
PROLS - PORCELANOSA MONTPELLIER
T: +33 (0)467 503 600 - F: +33 (0)467 501 121

NORD - PAS - DE - CALAIS:
LEZENNES - PORCELANOSA LILLE
T: +33 (0)20 340 340 - F: +33 (0)320 340 341
PAYS DE LA LOIRE:
BEAUCOUZ - PORCELANOSA ANGERS
T: +33 (0)241 738 100 - F: +33 (0)241 733 721
GUERANDE - PORCELANOSA LA BAULE
T: +33 (0)240 607 273 - F: +33 (0)240 110 659
LA CHAPELLE SAINT AUBIN - PORCELANOSA LE MANS
T: +33 (0)243 236 520 - F: +33 (0)243 240 512
LA ROCHE SUR YON - PORCELANOSA LA ROCHE S/YON
T: +33 (0)251 241 217 - F: +33 (0)251 242 399
ORVAULT - PORCELANOSA NANTES
T: +33 (0)228 073 950 - F: +33 (0)228 073 957
POITOU - CHARENTES:
CHASSENEUIL DU POITOU - PORCELANOSA POITIERS
T: +33 (0)549 119 787 - F: +33 (0)549 119 788
PROVENCE - ALPES - CTE DAZUR:
AUBAGNE - PORCELANOSA MARSEILLE
T: +33 (0)442 624 330 - F: +33 (0)442 624 339
MANDELIEU LA NAPOULE - PORCELANOSA CANNES
T: +33 (0)493 470 645 - F:
LES PENNES MIRABEAU (PLAN DE CAMPAGNE) - PORCELANOSA PLAN DE CAMPAGNE
T: +33 (0)442 466 120 - F: +33 (0)442 466 129
RHNE ALPES ET AUVERGNE:
CHAMPAGNE AU MONT DOR - PORCELANOSA LYON
T: +33 (0)478 668 151 - F: +33 (0)478 432 003
GEORGIA
TBILISI - COMODIN LTD
T: +995 32 332960 - F: +995 33001368
GHANA
ROUGE INTERIORS
T: +233 (0) 302 734752 - F:
GRECIA
ATTICA - AURORA BAGNO
T: +30 2105 594 520 - F: +30 2105 594 521
HATZ GROUP - PORCELANA:
ATHENS
T: 210 810 53 30
ATHENS
T: 210 96 07 010
ATHENS
T: 210 5156 163
ATHENS
T: 2299063750
LARISA
T: 2410 619 999
LEFKADA
T: 2645 0 72100
LOANNINA
T: 26510 92735-7
SERRES
T: 23210 36157
THESSALONIKI T: +30 2310 752 902 - F: +30 2310 753 564
THESSALONIKI
T: 2310 47 47 67
THESSALONIKI
T: 2310 672 340
GUADALUPE (ANTILLAS FRANCESAS)
BAIE MAHAULT - GUADELOUPE CERAMIQUE
T: 590 266 261 - F: 590 266 412
SAINT BARTHELEMY - ALMA QUINCAILLERIE
T: +590 276 494 - F: +590 276 738
GUATEMALA
GUATEMALA- FERRETERIA DE LA CONSTRUCCION FERCO
T: 502 2421 9000 - F: 502 2421 9009
GUAYANA FRANCESA
CAYENNE - ETS HENRY LE GAC
T: +594 302 719 - F: +594 300 713
HAIT
PUERTO PRINCIPE - EUROCERAM
T: +509 250 57 14 - F: +509 250 57 15
PETION VILLE -CERAMEX
T: +509 712 88 33 - F: +509 256 53 44
HONG KONG
HONG KONG - TAI YICK BUILDING MATERIALS
T: +852 23 956 670 - F: +852 23 957 831
HUNGRA
BUDAPEST - PORCAHUNGARY KFT
T: +36 1 237 08 78
BUDAPEST - PALATINUS FURDOSZOBASZALONOK
T: +36 61-430-04-17 - F: +36 1-387-91-36
DEBRECEN -PALATINUS FURDOSZOBASZALONOK
T: +36 52-531-476 - F: +36 52 536-822
EGER - PALATINUS FURDOSZOBASZALONOK
T: +36 36-312-013 - F: +36 36-313-270
GYNGYS -PALATINUS FURDOSZOBASZALONOK
59
Showrooms
Showrooms
T: +36 37-500-162 - F: +36 37-500-163

MISKOLC - PALATINUS FURDOSZOBASZALONOK
T: +36 46-412-256 - F: +36 46-412-741
KECSKEMT - PALATINUS FURDOSZOBASZALONOK
T: +36 76-412-272 - F: +36 76-509-204
BKSCSABA -PALATINUS FURDOSZOBASZALONOK
T: +36 66-328-432 - F: +36 66-328-432
BIELSKO BIALA - P.H.U. CERAMED

T: +48 33 829 8770 - F: +48 33 829 8773
BYDGOSZCZ - CERMAG POZNAN
T: +48 33 829 8770 - F: +48 33 829 8773
CZESTOCHOWA - P.H.U. FUGA
T: +48 343682944 - F: +48 343682944
GLIWICE - ADARI
T: +48 32 232 2155 - F: +48 32 232 2155
GORZW - WLKP
T: +48 95 721 41 08 - F: +48 95 721 41 08
KATOWICE - ADARI
T: +48 32 258 9574 - F: +48 32 258 9574
KIELCE - EXCLUSIVE
T: +48 41 345 75 49
KOLOBRZEG - CERMAG POZNAN
T: +48 94 355 18 88 - F: +48 94 355 18 80
KONIN - STREFA ARCHITEKTA
T: +48 63 243 31 14 - F: +48 63 243 30 97
KRAKW - MAX FLIZ
T: +48 01 229 07060 - F: +48 01 229 07060
LESZNO - CREMG POSNAN
T: +48 65 529 63 63 - F: +48 65 529 63 63
LODZ - FUMINO
T: +48 426373767
LUBLIN - EGEN
T: +48 81 441 58 42 - F: +48 81 441 80 74
OSTRW - WIELKOPOLSKI - CERMAG POZNAN
T: +48 62 735 81 12 - F: +48 62 737 28 91
POZNAN - CERMAG POZNAN
T: +48 616 616 161 - F: +48 618 302 378
RADOM - CERAMIKA PRIMUS
T: +48 48 381 0287 - F: +48 48 381 0290
RZESZW - F.H. BOZ S.A.
T: +48 17 850 0315 - F: +48 17 850 0341
SOPOT - AGENA SP. Z O.O
T: +48 58 550 4235 - F: +48 58 550 5459
SZCZECIN - STREFA ARCHITEKTA
T: +48 91 434 00 48 - F: +48 91 434 00 48
SLUPSK - GRESMAX
T: +48 59 843 41 53
WARSZAWA - WOIS SP Z.O.O
T: +48 22 6127213 - F: +48 22 6127216
WARSZAWA - GRESTON
T: +48 022 720 5525 - F: +48 022 720 5524
WARSZAWA - STREFA ARCHITEKTA
T: +48 22 252 57 39- F: +48 22 252 57 39
WROCLAW - CERMAG WROCLAW
T: +48 717 820 021 - F: +48 717 820 031
WATFORD - PORCELANOSA SOUTH EAST

T: +44 0844 481 8951 - F: +44 0844 481 8961
READING - PORCELANOSA SOUTH EAST
T: +44 0844 481 8954 - F: +44 0844 481 8964
SOUTHAMPTON - PORCELANOSA SOUTH EAST
T: +44 0844 481 8956 - F: +44 0844 481 8966
BRISTOL - PORCELANOSA WESTERN
T: +44 0117 959 71 51 - F: +44 0117 959 71 55
CARDIFF - PORCELANOSA WESTERN
T: +44 0292 0465 166 - F: +44 0292 0465 156
EXETER - PORCELANOSA SOUTH WEST
T: +44 01392 215 552 - F: +44 01392 215 557
DONCASTER - PORCELANOSA YORKSHIRE
T: +44 01302 30 47 13 - F: +44 01302 30 47 15
LEEDS - PORCELANOSA YORKSHIRE
T: +44 0113 24 44 223 - F: +44 0113 24 34 024
SHEFFIELD - PORCELANOSA YORKSHIRE
T: +44 0114 250 01 08 - F: +44 0114 255 22 65
GLASGOW - CTD GLASGOW
T: +44 0141 425 2666 - F: +44 0141 425 2662
NEW CASTLE-UPON-TYNE - CTD NEWCASTLE
T: +44 0191 276 1506 - F: +44 0191 265 0663
MANCHESTER - CTD DENTON
T: +44 0161 337 3050 - F: +44 0161 337 3051
LONDON - WORLDS END TILES
T: +44 0207 819 2100 - F: +44 0207 819 2101
BIRMINGHAM - CTD KINGS NORTON
T: +44 01214 338 787 - F: +44 01214 338 788
NORWICH - CTD NORWICH
T: +44 01603 775 300 - F: +44 01603 789 040
KENLEY - CTD KENLEY
T: +44 0208 668 3236 - F: +44 0208 660 6425
PORTUGAL
PORTO - PORCELANOSA PORTO S.A.
Rue Eng. Luis Delgado dos Santos 76, Apartado 1011
T: +351 226 166 600 - F: +351 226 161 959
LISBOA - PORCELANOSA LISBOA
Av. Infante D. Henrique 19/20
T: +351 21 831 3020 F: +351 21 831 3029
VISEU - PORCELANOSA VISEU
Edificio Paulo VI, Praa Paulo VI R/C Loja A
T: +351 232 430 440 - F: +351 232 430 449
RUMANIA
BACAU - SSAB IMPEX
T: +40 234 513 957 - F: +40 234 518 436
BACAU - DELTA DESING
T: 0372 710827
BRASOV - DELTA DESING
T: 0372 710812
BUCAREST - SSAB IMPEX
T: +40 214 113 009 - F: +40 214 120 097
BUCAREST - DELTA DESING
T: 021 4934129
T: 0372 710802
T: 021 4112546
BUCAREST - DELTA CONCEPT STORE
T: 0372 710808
BUCAREST - DISENO-GLAMOUR DESIGN
T: +40 31 22 93 210 - F: +40 31 22 93 215
CONSTANZA - SSAB IMPEX
T: +40 241 508 446 - F: +40 241 508 436
CRAIOVA - SC MYDWAY IMPEX SRL
T: +0040 722 285 029 - F: +0040 251 427 946
IASI - DELTA CONCEPT STORE
T: 0350 416701- F: 0350 416701
ORADEA - MAISON DESING
T: 0040 410 170
PITESTI - DELTA DESING
T: 0372 710832
PLOIESTI - DELTA DESING
T: 0372 710834
ORADEA - MAISON DESING
T: +40 743 507 811 F: +40 259 410 170
international
INDIA
NEW DELHI - MARMO HOME PVT. LTD.
T: +91 11 2321 6112 - F: +91 11 2321 8728
LBANO
LIBANO - GEAHCHAN GROUP
T: +961 1480520 - F: +961 1496607
LIBIA
BENGHAZI - EL RAGUOBI
T: 218 61 3370895 - F: 218 61 2237328
TRIPOLI - EL RAGUOBI
T: 218 91 3274885
INDONESIA
BANDUNG - WISMA SEHATI (BANDUNG)
T: +62 22 723 8515 - F: +62 22 723 8516
JAKARTA - WISMA SEHATI (MANGGA DUA)
T: +62 21 6013303 - F: +62 21 6251221
JAKARTA - WISMA SEHATI (POLIM)
T: +62 21 7278 7711 - F: +62 21 7278 7878
JAKARTA - WISMA SEHATI (BSD)
T: +62 21 537 7278 - F: +62 21 537 7880
SEMARANG - WISMA SEHATI (SEMARANG)
T: +62 24 356 2233 - F: +62 24 356 2222
SURABAYA - WISMA SEHATI (SURABAYA)
T: +62 31 546 2868 - F: +62 31 546 1468IRN
TEHRAN - FARBAR CO. LTD.
T: +98 21 88 03 6364 - F: +98 21 88 03 8283
LITUANIA
ALYTUS - IRIS LTD
T: +370 315 55969 - F: +370 315 55968
IRLANDA
CORK - ORIGINAL BATHROOM & TILES
T: +353 0 214 310 000 - F: +353 0 214 310 003
DUBLIN - TILESTYLE LTD
T: +00 353 1 8555200 - F: +00 353 1 8557471
POROSA TILE DISTRIBUTION LTD
T: +353 (087) 0909997 - F: +353 (087) 6335551
ISLA DE LA REUNIN (France)
SAINT DENIS - RAVATE PROFESSIONNEL SAS
T: +262 904 024 - F: +262 904 057
SAINT PIERRE - RAVATE PROFESSIONNEL SAS
T: +262 961 517 - F: +262 255 465
MARRUECOS
CASABLANCA - CERAMEX
T: +00212 945 3646166 - F: +00212 522 395363
CASABLANCA - SANITAIRE 2000
T: +212 22 363 225 - F: +212 22 394 100
MARRAKECH - ARCHIC
T: +212 5 24302929 - F: +212 5 24335954
RABAT - ARCHIC
T: +212 5 37792197 - F: +212 5 37792202
TANGER - FACENOR S.A.
T: +212 39 941 910 - F: +212 39 945 445
IRAK
ERBIL - AKSESUAR INSAAT ERBIL
T: +964 750 835 0055 - F: +964 66 210 1900
ISLANDIA
REYKJAVIK - ALFABORG EHF
T: +354 568 6755 - F: +354 568 1277
ISRAEL
ISRAEL REPRESENTATIVE - YECHIEL TOPOLSKI
T: +972 5 2327 6095 - F: +972 4 811 1729
HAIFA - TOPOLSKI & CO Ltd.
T: +972 4 904 0496 - F: +972 4 904 0455
BNEY BRAK - HEZI BANK
T: +972 3 616 6641 - F: +972 4 904 6643
MODIIN - LEVY BROS CERAMICS IMPORTERS LTD
T: +972 3 973 9977 - F: +972 3 973 9933
RAANANA - AMOZI NAGAR IMP. MARK. OGEN LTD.
T: +972 9 760 1501 - F: +972 9 741 1997
RISHON LE ZION - NEGEV CERAMICS
T: +972 9 943 6676 - F: +972 9 6661
JERUSALEM - BAR-AMI 1990 LTD.
T: +972 2 531 3444 - F: +972 2 538 3740
ITALIA
ANDRIA - MIDIL-CERAMICHE S.A.S
T: +39 08 835 66466 - F: +39 08 835 49260
CORSICO - PORCELANOSA LOMBARDIA S.P.A
T: +39 02 458 64310 - F: +39 02 458 64415
SASSUOLO - PORCELANOSA S.P.A
T: +39 05 368 06677 - F: +39 05 368 02184
ROMA - PORCELANOSA ROMA S.P.A
T: +39 06 888 9977 - F: +39 06 888 7056
JERSEY
ST. SAVIOUR - PASTELLA GROUP
T: 01534 870167 - F: 01534 723199
JORDANIA
AMMAN - AYMAN ABDALLAT & PARTNERS CO.
T: +962 65 672 376 - F: +962 65 672 476
KAZAJISTN
ALMATY - TISACO
T: +7 327 273 3848 - F: +7 327 258 1169
ALMATY - NOEL
T: +7 3272 4214 47 - F: +7 3272 5016 42
ALMATY - SHEBER-MARKET LTD
T: +7 3272 4353 86 - F: +7 3272 4324 64
STROYMART - KARAGANDA
T: (3212) 563 333
KOSOVO
PRISHTINA - N P KERASAN
T: +381 38 602 667 - F: +381 38 602 667
KUWAIT
SAFAT - HASSAN ABUL HASSAN SADIQ
T: +965 262 4466 - F: +965 265 1444
LETONIA
RIGA - TORMANIS UN PARTNERI
60
T: +371 784 5361 - F: +371 784 5360
MACEDONIA
SKOPJE - TE LINDI D.o.o.
T: +389 2 2 602 628- F: +389 2 2 602638
MALTA
BIRKIRKARA - ROGER SATARIANO & SONS LTD
T: +356 21 442 769 - F: +356 21 497 017
MALASIA
KUALA LUMPUR - APEX CERAMICS CITY
T: 603 4043 8333 - F: 603 4044 3339
MARTINICA (ANTILLAS FRANCESAS)

LAMENTIN - JOSEPH COTTRELL S.A.
T: +596 509 810 - F: +596 506 524
MXICO
INTERLOMAS - PORCELANOSA MXICO
T: (+55) 36 05 00 84 (+55) 36 05 00 65 (+55) 36 05 00 67
TLALNEPANTLA - PORCELANOSA MXICO
T: (+55) 26 20 04 62 (+55) 26 20 09 58
MXICO DF - PORCELANOSA MXICO
T: (+55) 5831 7340
MOLDAVIA
CHISINAU - PLIMED (CASA MODERNA)
T: +373 2 2501252/54/55/56 - F: +373 2 2716824
CHISINAU - CASA MODERNA
T: +373 22 810 260/810 201/810 202/810 207 - F: +373 22 810221
MONTENEGRO
BAR - VIP HOMES
T: +382 304 100 - F: +382 340 900
NEPAL
KATMANDU - BAJRA & BAJRACHARYA ENT.
T: +977 1 552 4851 - F: +977 1 552 4851
NICARAGUA
MANAGUA - DECO CENTER - GRUPO IBERICA NICARAGUA
T: +505 270 2121 - F: +505 277 0834
NIGERIA
LAGOS - VICTORIA ISLANDS-PN LIFESTYLE
T: +23 480 552 63043 - F: +23 480 222 38012
NORUEGA
OSLO - FAGFLIS
T: +47 22 808 560
NUEVA ZELANDA
AUCKLAND - TILECO LTD
T: +64 9 573 5736 - F: +64 9 573 5737
PASES BAJOS
VENLO - PGN CERAMICA B.V.
T: +32 (0)15 253366 - F: +31 (0)15 253367
PAKISTN
KARACHI - S. ABDULLA & CO.
T: +92 21 585 0490 - F: +92 21 585 0230
PANAM
PANAM - COCINAS ITALIANAS S.A. - SPAZIO
T: +507 214 3756 - F: +507 264 2542
PER
LIMA - CASSINELLI
T: +51 14 513 712 - F: +51 15 612 757
POLONIA
BIALYSTOK - AKCESS
T: +48 85 6643436 - F: +48 85 6643434
BIELSKO BIALA - ADARI
T: +48 33 822 0449 - F: +48 33 822 0449
PRINCIPADO DE ANDORRA
ANDORRA LA VELLA - MATERIALS PIRINEU
Avda. Tarragona, 20
T: +376 822 353
PUERTO RICO
SAN JUAN-THE TILE SHOP
T:+1787 775 2030 - F:+1787 707 0137
GUAYNABO-THE TILE SHOP
T: +1787 720 2030 - F: +1787 287 2030
QATAR
QATAR - UNITED SUPPLIES
T: +974 46 85 164 - F: +974 46 85 165
REINO UNIDO
NORWICH - PORCELANOSA ANGLIA
T: +44 01603 789 363 - F: +44 01603 789 375
PETERBOROUGH - PORCELANOSA ANGLIA
T: +44 01733 325 111 - F: +44 01733 384 003
NOTTINGHAM - PORCELANOSA MIDLANDS
T: +44 0115 983 65 00 - F: +44 0115 983 65 65
SOLIHULL - PORCELANOSA MIDLANDS
T: +44 0121 746 64 64 - F: +44 0121 746 64 65
SOLIHULL - PORCELANOSA MIDLANDS - REGIONAL HEAD OFFICE AND
DISTRIBUTION CENTRE
T: +44 0121 780 00 00 - F: +44 0121 780 00 99
NEWCASTLE - PORCELANOSA NORTH EAST
T: +44 0191 272 5224 - F: +44 0191 272 29 86
MANCHESTER - PORCELANOSA NORTH WEST
T: +44 0161 817 33 00 - F: +44 0161 817 33 01
WARRINGTON - PORCELANOSA NORTH WEST
T: +44 01925 237 807 - F: +44 0192 523 78 88
EDINBURGH - PORCELANOSA EDINBURGH
T: +44 0131 335 38 83 - F: +44 0131 335 38 84
GLASGOW - PORCELANOSA SCOTLAND - SHOWROOM & DESIGN CENTER
T: +44 0141 552 8110 - F: +44 0141 552 5883
GLASGOW - PORCELANOSA SCOTLAND - SHOWROOM & HEAD QUARTERS
T: + 44 0141 533 1000 - F: +44 0141 533 1006
CROYDON - PORCELANOSA SOUTH EAST
T: +44 0844 481 8953 - F: +44 0844 481 8963
FULHAM - PORCELANOSA SOUTH EAST
T: +44 0844 481 8952 - F: +44 0844 481 8962
international
REPBLICA CHECA
BRNO - DESIGN BATH SE.
T: +420 547 216 621
PRAGUE - DESIGN BATH SE.
T: +420 22 984 951
REPBLICA DOMINICANA
SANTO DOMINGO - CARABELA S.R.L.
T: + 1 809 544 2560 - F: + 1 809 541 0818
SANTIAGO - CARABELA S.R.L. PORCELANOSA
T: + 1 809 971 1234 - F: + 1 809 971 6728
LA ROMANA - CARABELA S.R.L.
T: + 1 809 556 3606/ 1 809 550 9006 - F: + 1 809 221 7416
BVARO - CARABELA S.R.L.
T: + 1 809 466 0020 - F: + 1 809 466 2006
RUSIA
BRYANSK - ESCOBAR
T: +7 483 266 55 56
EKATERINBURG - DOM PLITKI TERRA
T: +7 343 270 00 26
IRKUTSK - PIRAMIDA
T: +7 395 248 31 13
KALININGRAD - KERAMIKA & KERAMOGRANIT
T: +7 4012 370 460 - F: +7 4012 370 460
KAZAN - ALAN VEST
T: +7 843 262 34 19
KRASNODAR - BOMOND
T: +7 861 210 26 83 - F: +7 861 234 10 75
KRASNOYARSK - SIBLINE
T: +7 3912 75 20 45
MAKHACHKALA - T.D. MODERN
T: +7 8722 67 65 69
MOSCU - ARTISAN
T: +7 495 742 40 40 - F: +7 495 937 52 19
MOSCU - KERAMIKA ELIT
T: +7 495 724 18 18
MOSCU - UNDERGROUND
T: +7 495 253 53 30 / +7 495 253 69 32
MOSCU - ZODIAK KERAMIKA
T: +7 495 730 97 97
MOSCU - INTERIER KERAMIKA
T: +7 495 730 97 97 - F:
NOVOSIBIRSK - ARTLUX
T: +7 383 208 00 07
NOVOSIBIRSK - LAVERNA
T: +7 383 334 02 40
PYATIGORSK - BOMOND
T: +7 8 (8793) 975544
ROSTOV NA DONU - BOMOND
T: +7 863 266 50 34 - F: +7 863 268 73 39
SAMARA - ANTAREX
T: +7 846 267 39 34 - F: +7 846 267 39 33
SOCHI - BOMOND
T: +7 8622 61 23 17
ST. PETERSBURG - DOM LAVERNA
T: +7 812 331 27 00 - F: +7 812 331 27 16
ST. PETERSBURG - NOVUS
T: +7 812 320 69 50 - +7 812 320 68 81 - F: +7 812 328 17 93
ST. PETERSBURG - INTERIER KERAMIKA
T: +7 812 994 79 49 - F:
STAVROPOL - VALENCIA
T: +7 865 229 81 41 - F: +7 865 229 81 51
SURGUT - DOM PLITKI TERRA
T: +7 346 237 92 13
TYUMEN - DOM PLITKI TERRA
T: +7 345 241 09 61 - +7 345 241 04 74
SENEGAL
DAKAR - C.C.S.
T: +221 33 849 04 04 - F: +221 33 823 13 10
SERBIA
BELGRADO - CERAMIC BY PORCEL.
T: +381 11 3343026 - F: +381 11 3343297
NOVI SAD - RACA KOMERC
T: +381 21 451 534 - F: +381 21 472 0668
SINGAPUR
SINGAPUR - FERNANDO MARTIN BENITO
T: +65 97801472 - F: +65 64621620
SIRIA
SIRIA - DAMASK ROSE
T: +963 11 334 6600 - F: +963 11 334 6601
SRI LANKA
COLOMBO - NAVEEN CERAMIC (PVT)
T: +94112325406 - F: +94112335637
SUDFRICA
CAPE TOWN - KENZAN TILES
T: +27 21 5108310 - F: +27 21 5108317
CAPE TOWN - TACTILE
T: +27 21 70249
DURBAN - CLASSIC TRADING
T: +27 31 577 8382 - F: +27 31 577 7056
T: +27 31 579 1900 - F: +27 31 579 1666
JOHANESBURGO - CLASSIC TRADING
T: +27 11 656 0400 - F: +27 11 656 0403
SUDN
KHARTOUM - ALMASSARRA FOR IMPORT EXPORT
T: +249 183579399 - F: +249 183579499
SUECIA
BORAS - KAKELPALATZET I BORAS AB
T: +46 (0)33 226 180 - F: +46 (0)33 226 181
BROMMA - KAKELPALATZET I BROMA AB
T: +46 (0)8 56 487 831 - F: +46 (0)8-988 620
GTEBORG - KAKELPALATZET I BCKEBOL AB
T: +46 (0)31 571 478 - F: +46 (0)31-571 477
KATRINEHOLM - KAKELPALATZET I KATRINEHOLM AB
T: +46 (0)8150-51 740 - F: +46 (0)150-51 775
NYKPING - KAKELPALATZET I NYKPING AB
T: +46 (0)155 200 999 - F: +46 (0)155-211 244
UDDEVALLA - KAKELPALATZET I UDDEVALLA AB
T: +46 (0)522 64 54 00 - F: +46 (0)0522-64 54
HASSLEHOLM - STENMONTOREN I HASSLEHOLM
T: +46 451 381 970 - F: +46 451 381 979
MALM - KERMA KAKEL AB
T: +46 403 122 40 - F: +46 403 122 59
MOLNDAL - KAKELPALATZET I MOLNDAL (CENTRAL)
T: +46 (0)31 776 50 51 - F: +46 (0)31 86 39 62
SUIZA
BASEL - HG COMMERCIALE SPONAGEL
T: +41 61 337 50 20 - F: +41 61 337 50 01
BERN - HG COMMERCIALE SPONAGEL
T: +41 31 99 622 88 - F: +41 31 99 622 01
CRISSIER - SABAG SA
T: +41 21 633 06 84 - F: +41 21 633 06 85
GENEVE - SABAG SA
T: +41 22 908 06 90 - F: +41 22 908 06 95
LANDQUART - HG COMMERCIALE SPONAGEL
T: +41 81 300 00 15 - F: +41 81 300 00 16
LOSONE - BAZZI PIASTRELLE
T: +41 91 792 16 02 - F: +41 91 792 18 02
LUZERN - HG COMMERCIALE SPONAGEL
T: +41 41 367 60 90 - F: +41 41 367 60 99

PURA - SACCOMANNO TRADE AGENCY
T: +41 796 20 85 90 - F: +41 916 00 97 71
SCHLIEREN - HG COMMERCIALE SPONAGEL
T: +41 1 732 44 44 - F: +41 1 732 44 00
TAILANDIA
BANGKOK - BOONTHAVORN CERAMIC (RATCHADAPISEK)
T: +66 2 275 0029 - F: +66 2 275 2057
BANGKOK - BOONTHAVORN CERAMIC CO. LTD (RANGSIT)
T: +66 2 902 0171 - F: +66 2 902 0184
BANGKOK - BOONTHAVORN CERAMIC CO. LTD(PINKLAO)
T: +66 2 441 3075 - F: +66 2 441 4049
BANGKOK - BOONTHAVORN CERAMIC CO. LTD(SUVARNABHUMI)
T: +66 2 316 0429 - F: +66 2 316 0439
BANGKOK - BOONTHAVORN CERAMIC CO. LTD
(THONBUREE-PAKTHOR)
T: +66 2 896 4471 - F: +66 2 896 4473
BANGKOK - BOONTHAVORN CERAMIC CO. LTD (KASET NAVAMIN))
T: +66 2 791 2777 - F: +66 2 943 9058
PATTAYA - BOONTHAVORN CERAMIC CO. LTD (PATTAYA)
T: +66 38 052 222 - F: +66 38 052 221
HUAHIN - BOONTHAVORN CERAMIC CO. LTD (HUAHIN)
T: +66 3252-2555// +668-5488-4144 - F: +66 3252 0141
TAIWN
KAOHSIUNG - NEW CENTURY CONSTRUCTIONAL
T: +886 7 384 8834 - F: +886 7 387 1043
TAINAN - NEW CENTURY CONSTRUCTIONAL
T: +886 6 261 3290 - F: +886 6 261 4373
TAIPEI - NEW CENTURY CONSTRUCTIONAL
T: +886 2 3393 3123 - F: +886 2 3393 3138
TAICHUNG - NEW CENTURY CONSTRUCTIONAL
T: +886 4 2372 8166 - F: +886 4 2376 2818
TNEZ
TNEZ - LIFE STYLE
T: +216 71 861 551 - F: +216 71 861 549
TUNIS CEDEX - ABDENNADHER BRICOLAGE CENTER
T: +216 71 725 777 - F: +216 71 760 046
SFAX - ABDENNADHER BRICOLAGE CENTER
T: +216 74 468 072- F:
H SOUSSE - ABDENNADHER BRICOLAGE CENTER
T: +216 73 224 424- F:
HAMMAMET - ABDENNADHER BRICOLAGE CENTER
T: +216 72 260 477- F:
TURQUA
ISTAMBUL - YTAS
T: +90 2 1227 44720 - F: +90 2 1227 20874
ISTAMBUL - FANTASIA SERAMIK TICARET
T: +90 0212 275 7511-272 85 48 - F: +90 212 272 2301
UCRANIA
KHARKIV - EUROPA
T: +380 482 37 85 40 - F: +380 57 771 4509
KYIV - MILLENNIUM CONCEPT
T: +38 044 2796060 - +38 044 2796010 - F: +38 044 5676554
KYIV - CERAMIC FASHION
T: +38 044 281 07 27 KYIV - CERAMIC FASHION
T: +38 044 246 79 79
KYIV - SVIT KERAMIKI
T: +38 044 423 00 03
LVIV - KERAM MISTO
T: +38 32 293 98 89
LVIV - SALON KARMEN
T: +380 32 244 40 55 F: +380 32 252 70 94
ODESSA - FIRMENIY SALON PORCELANOSA GRUPO
T: + 38 482 37 85 40 F: +380 482 423111
DONETSK - DI-ART
T: +38 062 387 22 22
DONETSK - CERAMIC FASHION
T: +38 062 381 23 31
DONETSK - NAUTILUS
T: +38 062 387 58 08
URUGUAY
MONTEVIDEO - ACHER
T: +598 2487 5630 - F: +598 2487 5630
PUNTA DEL ESTE - ACHER
T: +598 42 248 343
T: + 598 42 250 869
VENEZUELA
CARACAS - PROSEIN
T: +58 212 239 2911 - F: +58 212 239 9460
VIETNAM
HANOI - MILAN ARCHITECTURAL
T: 84 4 3791 3567 - F: 84 4 3791 3568
HOCHIMINH CITY - MILAN ARCHITECTURAL
T: 84 8 5412 1819 - F: 84 8 5412 1820
YEMEN
AL-YAMAMAH GROUP ABO JALAL TAHER CORPORATION FOR GENERAL TRADE
T: +967 1 470 375 - F: +967 1 405 665
61
butech building technology, s.a.

Ctra. Vila-real - Puebla de Arenoso (CV-20), Km. 2.5 Apartado de Correos 372 12540 Villarreal, Castelln - ESPAA.
Telfono (+34) 964 53 62 00 Fax: (+34) 964 53 00 34 E-mail: [email protected] www.butech.es
62
122012
63
64

Bu Suelos GB

Uploaded by

Copyright:

Available Formats

Bu Suelos GB

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bu Suelos GB

Uploaded by

Copyright:

Available Formats

Raised access

Raised access flooring

Raised access flooring for exteriors

How to get a budget of a butech system?

Raised access flooring

System application areas

Advantages over other raised access floor systems

Able to withstand a high mechanical load.

Panels with chipboard core

Table Technical Properties

Concentrated load centre of side of the panel (2.5 mm deflection)

Maximum allowed load centre of side of the panel

Concentrated load at the center of the panel (2.5 mm deflection)

Maximum load allowed in the center of the panel

Uniformly distributed load

Class according to EN 12825

Concentrated load centre of side of the panel (2.5 mm deflection)

Maximum allowed load centre of side of the panel

Concentrated load at the center of the panel (2.5 mm deflection)

Maximum load allowed in the center of the panel

Uniformly distributed load

Class according to EN 12825

Lower coating 38M1A:

Concentrated load centre of side of the panel (2.5 mm deflection)

Maximum allowed load centre of side of the panel

Concentrated load at the center of the panel (2.5 mm deflection)

Inside coating 38M1F:

Maximum load allowed in the center of the panel

Uniformly distributed load

Class according to EN 12825

Physical features (not including coating material):

Transverse electrical resistance

Lower coating 38M2a:

Table Technical Properties

Concentrated load centre of side of the panel (2.5 mm deflection)

Concentrated load at the center of the panel (2.5 mm deflection)

Maximum load allowed in the center of the panel

Uniformly distributed load

Transverse electrical resistance

Maximum allowed load centre of side of the panel

Concentrated load centre of side of the panel (2.5 mm deflection)

Class according to EN 12825

Physical features (not including coating material):

Maximum allowed load centre of side of the panel

Concentrated load at the center of the panel (2.5 mm deflection)

Maximum load allowed in the center of the panel

Uniformly distributed load

Class according to EN 12825

Concentrated load centre of side of the panel (2.5 mm deflection)

Maximum allowed load centre of side of the panel

Concentrated load at the center of the panel (2.5 mm deflection)

Maximum load allowed in the center of the panel

Uniformly distributed load

Class according to EN 12825

Panels with calcium sulfate core

Table Technical Properties

Calcium sulphate core

Concentrated load centre of side of the panel (2.5 mm deflection)