COLPOSCOPE

MODEL 955 LED

OWNERS MANUAL

PRECISION MICROSCOPES

PRECISION MICROSCOPES
We are here to serve you!
If you have any questions regarding Seilers products or services,
please feel free to contact us.
Toll-Free: 800.489.2282
Local: 314.968.2282
Fax: 314.968.3601
E-mail: [email protected]
www.seilerinst.com

Microscope Division Manager

Dane Carlson

ext. 365 [email protected]

Corporate Marketing/Sales Representative

Nicole Rasch

ext. 345 [email protected]

Technical Product Information

Tony Leise

ext. 363 [email protected]
Bulb Order Information

Sandra Jeremich

ext. 336 [email protected]

Register your product warranty online:

http://www.seilermicro.com/warranty-registration/
2

TABLE OF CONTENTS
INDICATIONS FOR USE
TECHNICAL DATA
BINOCULARS
OBJECTIVE
COLPOSCOPE ASSEMBLY
COLPOSCOPE HANDLING
HOW TO FOCUS THE COLPOSCOPE
OPTICAL AND FIELD MAGNIFICATION TABLE
CLEANING
TROUBLESHOOTING TIPS
LED LIGHTSOURCE
OWNERS RECORD
NOTES

4
4
5
5
6
8
8
9
9
9
10
16
16

INDICATIONS FOR USE

The Seiler Colposcope is intended to provide magnified visualization of the tissues of the vulva, vagina, cervix, and anogenital area. It is used to evaluate these tissues, select areas for biopsy, as necessary, and to facilitate related procedures, e.g., LEEP, conization, etc.
Caution: Federal law restricts this device to sale by or on the order of a physician or practitioner trained in its use.
This manual is intended to give assistance in the assembly and operation of the Colposcope Model 955.

This handbook includes a chapter to acquaint the user with the assembly process.

Read this handbook carefully prior to operating the colposcope.
Do not allow persons unfamiliar with the equipment to operate the colposcope.

TECHNICAL DATA
A - Colposcope Head

Microscope Galilean System

Binoculars
F= 170 MM (optional: Inclined, F=135 mm)

Objective (focus)
300 mm (optional: 200 400 mm)

Eyepieces
Wide angle type 12,5x, adjustable
(-6 to +6 dioptries)
Magnification See table

Observation field
See table

Illumination field
See table

Interpupillary distance
Adjustable between 42 mm and 75 mm

Illumination System:
Source LED Illumination System
Filter Green filter
Focusing:
Macro Moving the pantographic arm

Micro
Manual, with rack and pinion

Total weight of the head
3.0 Kg
B- Colposcope stand

Horizontal reach
Angular rotation (arms)
Distance between the floor
and the objective
Load adjustment
Base
Total floor stand set weight

725 mm. - first arm 600 mm, second arm 110 mm.
340
635 mm to 1295 mm
4 to 7 kg
Base with five casters, two with brakes
34 kg

BINOCULARS
1
2

3
1. Binoculars body
2. Eyepieces with diopter adjustment
3. Eye Protectors

OBJECTIVE
The Colposcopes are factory shipped with the following objective:
F = 300 mm
The following optional objectives are available:
F = 200 mm
F = 250 mm
F = 300 MM
F = 400 mm

COLPOSCOPE ASSEMBLY

Place post into base with pin in

base, lined up with notch in post.

Install bolt and tighten securely

with Allen wrench (provided).

Step 3
Place Pantographic arm into
Lighthouse.

Step 2

Step 1

Step 4
Install Light Guide into bottom
cover of arm.

Step 5

Install extension arm by pulling

plunger and inserting into
Pantographic arm.

Plunger

t
Step 6
Install Optic Pod into the
extension arm.

Step 7
Install Binocular Head onto the
Optic Pod and tighten thumb screw.

Remove these parts from the packing case, with maximum care:
a) Optical Head Support b) Binoculars
Introduce the spindle into the terminal. Screw the safety knob and lock the
spindle with the knob.
At first release the screw. Place the binoculars on the flange of the body
making sure the pin fits into the slit of the binoculars flange. Tighten the fixing screw and make sure that the binoculars
are firmly secured to the Colposcope.
The correct position of the Binoculars to the Colposcope
Align the guide-pin to the groove, adjust the base of the Binoculars to point the flange, and t ighten the set screw.
Finally check if the Binoculars are well secured and do not move.
The Binoculars Eyepieces
The eyepieces are mounted to the binocular housings. Make sure that they are well seated.
The Eye Protectors
The Eye Protectors are threaded to the Binoculars. The Eye Protectors protect the eyes, prevent the intake of lateral
lights and create a suitable darkroom to the observer.
Precautions
The Binoculars contain optical parts internally that cannot be cleaned without disassembly.
It is therefore advisable to keep the eyepieces inserted in the eye tubes at all times in order to keep impurities from
getting inside the housing. It is recommended that if the eyepieces are removed, a clean cloth be placed over the
openings.

COLPOSCOPE HANDLING
a- MAGNIFICATION SELECTOR
The magnification selector has 6 positions, engraved from 1 to 5. Note that the position 3 repeats. The position being
used is the one aligned to the black dot, engraved on the body. The magnification factors are found in the table
appended.
b- PANTOGRAPHIC ARM BALANCING
The Colposcope Model 955 is factory adjusted for balancing, using the regular optical head, and may only require
adjustment at the tension knob when accessories are added.

HOW TO FOCUS THE COLPOSCOPE

Preliminarily:
Displace the Articulated Arm of the stand set where the colposcope is fixed, and point its
objective to the direction of the field to be observed. For an objective with focal distance of 300 mm, keep a gap of
about 300 mm between the lens and the specimen.
NOTE: It is easier to focus when the illumination system is on. The illuminated field coincides with the focused object.
Parfocalizing Procedure:
1)
Depress the orange tab on each eyepiece and rotate the zero (0) marking on the index line on the
eyepiece tube.
2)
Turn the magnification drum to the highest setting (5) and focus sharply on a target, such as a
piece of paper with an X drawn on it, by using the focusing knobs.
3)
The turn the magnification drum to the lowest setting (1) and focus by turning eyepieces

clockwise or counter clockwise until you reach sharp focus. Be sure to depress the orange tab
when turning the eyepiece.
4)
Now the microscope is in focus for your eyes throughout all the magnification settings.

Eyepieces

Binocular Head

Thumb Screw

Magnification Turret
Tension Adjustment Knob

Objective Lens

Handle
Fine Focus Knob

Green Filter (Push/Pull Knob)

OPTICAL AND FIELD MAGNIFICATION TABLE

The optical magnifications achieved with the Colposcope are determined by 3 variables: the objective focal distance, the
position of the Magnification Selector and the by
eyepiece used.
The table shows the optical magnification and the observed field diameters, in millimeters, depending on those
variables. At the bottom line of the table the illuminated field is shown, corresponding to the light disk incident on the
field, with a diameter that depends only on the focus of the work objective.
The magnification selector has 6 positions: 1, 2, 3, 4, and 5. The 3 position is repeated in the selector. The working
position is the one aligned to the red dot mark.
Magnica(on Table for 985
Binocular Head Focal Length: F=170mm
Eyepiece

Posi(on of
BuNon

1(0.4)
2(0.6)
3(1.0)
10X/18
4(1.6)
5(2.5)
1(0.4)
2(0.6)
12.5X/16 3(1.0)
4(1.6)
5(2.5)
1(0.4)
2(0.6)
3(1.0)
16X/16
4(1.6)
5(2.5)
Illuminated Field

Objec(ve Lenses
175
200
250
300
400
Magnica(on
Field
Magnica(on
Field
Magnica(on
Field
Magnica(on
Field
Magnica(on
Field
3.89 46.32
3.40
52.94
2.72
66.18
2.27
79.41
1.70
105.88
5.83 30.88
5.10
35.29
4.08
44.12
3.4
52.94
2.55
70.59
9.71 18.53
8.50
21.18
6.80
26.47
5.67
31.76
4.25
42.35
15.54 11.58
13.60
13.24
10.88
16.54
9.07
19.85
6.80
26.47
24.29
7.41
21.25
8.47
17.00
10.59
14.17
12.71
10.63
16.94
4.86 41.18
4.25
47.06
3.40
58.82
2.83
70.59
2.13
94.12
7.29 27.45
6.38
31.37
5.10
39.22
4.25
47.06
3.19
62.75
12.14 16.47
10.63
18.82
8.50
23.53
7.08
28.24
5.31
37.65
19.43 10.29
17.00
11.76
13.60
14.71
11.33
17.65
8.50
23.53
30.36
6.59
26.56
7.53
21.25
9.41
17.71
11.29
13.28
15.06
6.22 41.18
5.44
47.06
4.35
58.82
3.63
70.59
2.72
94.12
9.33 27.45
8.16
31.37
6.53
39.22
5.44
47.06
4.08
62.75
15.54 16.47
13.60
18.82
10.88
23.53
9.07
28.24
6.80
37.65
24.87 10.29
21.76
11.76
17.41
14.71
14.51
17.65
10.88
23.53
38.86
6.59
34.00
7.53
27.20
9.41
22.67
11.29
17.00
15.06
65
72
90
108
144

CLEANING
The Objective, pointed to the field under clinical or surgical treatment, is exposed to blood and other bodily fluids. Spots
on the objective dim the passage of the light. Stains blur the light, reducing the luminosity of the optical observation.
Cotton padding wetted in alcohol rubbed softly, in CIRCULAR MOVEMENTS over the optical surface, is enough to clean
the stains, except those of clotted blood. Clotted blood shall be cleaned with cotton and hydrogen peroxide.

If the eyepieces are too dirty, change the cotton at each circular friction motion to avoid spreading out the dirt.

On the other hand, there is an effective protector for the objective, fitted under pressure at the outer edge of the lens
which protects the objective against splatter and contamination.

To have the eyepieces and objective well cleaned for clinical use, it is sufficient to use cotton.

The metallic parts (chrome-plated or painted) can be cleaned with cotton and alcohol.

TROUBLESHOOTING TIPS
ELECTRIC CONNECTIONS

Ensure that none of the following are present:

Broken wires inside the cable.

Loose wires at the connector.

Broken wires at the fixation, inside the connector.

Oxidized connectors terminals.

LED LIGHTSOURCE
1. INTRODUCTION
Congratulations on the purchase of your new SSL-2000 Light Source! This user-friendly LED light source is a high
efficiency light source utilizing state of-the-art superior illumination technology. It offers a variety of features such as:
6500 K daylight brightness for good color definition
Quiet operation
Long life, 50,000 hrs.
Compact and light weight
Pulse-width Modulation (PWM) Electrical Dimming
This section of the manual will help you to install the device and optimally integrate it with other components of
your system. It will also instruct you how to operate the LED Light Source and how to keep it clean. It will give you
maintenance and service guidelines as well as recommendations for best performance results.
1.1 INDICATIONS FOR USE: The LED Light Source is used to illuminate the site of surgery during minimally invasive
surgical procedures. The light is transmitted from the light source through a fiber optic cable and a scope.
2. WARNINGS
To prevent fire or electric shock, do not open or expose the LED light source unit to rain or moisture. Refer all servicing to
qualified personnel only.
Not suitable for use in presence of flammable anesthetic mixture with air or with oxygen or nitrate oxide.
To prevent any potential electro-magnetic interference, do not use any kind of cellular phone near the
light source.
This product should be used only with type BF endoscopic instruments which have been certified
according to IEC 601-1 for medical equipment and IEC 601-2-18 for endoscopic equipment.
Caution: This product is not provided as sterile.
Caution: All devices connecting to the LED Light Source must be classified as medical equipment. When
additional information processing equipment is connected to the LED Light Source, the operator must
determine that all equipment complies with the appropriate end-product standards (such as IEC 60950
or IEC 60065 and the Standard for Medical System, IEC 60601-1-1).
Caution: The LED Light source can cause permanent eye damage if viewed directly with unprotected eye.
To reduce the chance of eye damage, set the intensity control always to the minimum level and plug the
fiber optic cable into the unit before turning on the power.

EQUIPMENT CONNECTION
Caution: The fiber optic cable must be a NON-CONDUCTIVE CABLE. It should not have conductive
shielding or any other conductive connection between the patient and equipment. Such connection will
impair safety of the equipment. It must be rinsed free of soaking/disinfectant solution and dried before
plugging into the LED light source receptacle. Ensure the optical surface is clean before engaging into the
light source.

10

3. SPECIFICATIONS

Item
Light Source Type
Power
Color Temperature

Specification
LED (Light Emitting Diode)
50 Watt

Led life
Light guide adapter

50,000 hours (typical)

Brightness control
Input voltage
Rated Power
Regulatory Approvals

PWM (Pulse-width Modulation) 0-100% Dimming

100-240V AC, 50/60 Hz
52 watt
UL60601-1,CAN/CSA C22.2 No.601.1 (SUP1+AM2),EN 60601-1-2 and CE
marked
Class I, BF-type
Continuous operation
Not Protected Equipment, IPX0

6500 K

Equipment Class
Mode of Operation
Water Resistant
Operating Environment
Temperature
Relative Humidity
Air Pressure
Storage Environment
Temperature
Relative Humidity
Air Pressure
Dimensions
Weight

+0 to +40 C (32 to 104 F)

0 to 85%rh, non condensing
700 to 1060 hPa

-20 to +60 C (-4 to 140 F)
30 to 95%rh, non condensing
700 to 1060 hPa
4.65 W x 3.32 H x 7.25 D
2.5 lbs./1.14 kg

4. OPERATING ELEMENTS, SYMBOLS AND FUNCTIONS

4.1 FRONT PANEL

No.
1
2
3

Name
Power switch
Light Guide Adapter
Intensity Control

Function
Turns the light source on and off. Fan will operate
Electronically controls the light output
11

4.2 REAR PANEL

2
3

1
Figure 2. LED Light Source Rear Panel

No.
1
2
3
4

Name
AC main inlet
Fuse
Grounding Connector
Venting grids

Function
Accepts AC power cord
2A, 250V (1/4 x 1 ) time delay
For potential equalization
Allows adequate ventilation and cooling of the light source

4.3 Bottom Panel

Figure 3. LED Light Source Product Label

12

5. INSTALLATION
5.1 SETTING UP THE LED LIGHT SOURCE
Place the LED light source on a stable surface (cart, counter, stand, etc.).
NOTE: Avoid places where the light source may be splashed with liquid.

Absolutely DO NOT use in any environment with explosive or flammable gases.

DO NOT block the venting grids of the LED light source.
Make sure the power switch is in OFF position.
Connect AC power cord to the power inlet located on the rear panel of the light source.
CAUTION: Use only cords provided with the light source.
Plug the AC power cord into a wall outlet using the three-prong plug supplied with the unit.
CAUTION: To prevent electric shock, connect power cords of peripheral equipment through medical isolation
transformers.
NOTE: When using medical isolation transformer, be sure to check the transformer power ratings.
Make sure that the power cord is connected to the main power with three-prong plug (USA use UL2601-1 rated
isolation transformers and/or power strips only).
CAUTION: When used in clinical or residential areas near radio or TV units, this equipment may be subjected to radio
interference. To avoid adverse electromagnetic effects, DO NOT operate this equipment near RF energy equipment.
5.2 CONNECTING THE FIBER OPTIC CABLE
Turn intensity control to the minimum setting. Connect the light cable to the instrument and then plug the light cable
endfitting into the port on the front panel.
6. OPERATION
6.1 POWERING UP THE LED LIGHT SOURCE
To operate the LED light source: Turn on the power switch. The indicator on power switch will light.
6.2 LIGHT BRIGHTNESS DISPLAY AND CONTROL
The light brightness adjustment enables the user to obtain a brighter or darker illumination of the object of observation.
Adjust the light intensity by turning the intensity control knob.
7. CLEANING
NOTE: Always disconnect the power cord before cleaning the system.
The unit can be cleaned with any cleaning agent, which is used for external cleaning of electric equipment, according to
instructions given by the manufacturer of the cleaning solution.
Do not allow excessive moisture or liquids to come in direct contact with the unit.
Do not use cleaning agents that are not permitted for use with plastics, i.e., ammonia, acetone, salty acids (HCl), etc.
Do not allow cleaning agents or liquids to enter the unit outlets.
8. DISINFECTION
8.1 DISINFECTING THE UNIT
NOTE: Always disconnect the power cord before cleaning the system.
Use any disinfectant agents which are commonly applied while disinfecting surfaces of electric medical equipment. Such

13

disinfectant agents are usually in the form of sprays or damp cloths.

Follow the instructions given by the manufacturer of the disinfectant solution.
9. SERVICING AND REPAIR
Defective items of equipment are to be serviced and repaired exclusively by persons authorized by the manufacturer. All
repair work shall employ original manufacturers parts only.
9.1 FUSE REPLACEMENT
CAUTION: Always disconnect power cord and turn main switch off before fuse replacement.
Turn light source off and unplug power cord. On back of unit remove fuse by turning fuse cover and pulling out fuse.
Replace fuse with 2 AMP (1/4 x 1 ) time delay 250V rated fuse. Insert back into fuse housing.
Re-connect the power cord and turn the LED light source on according to section 6.1.
9.2 LIMITED WARRANTY
Your LED light source carries a 1-year warranty from the date of shipment on workmanship and all defects of material, excluding replaceable sweatbands, headband, fiberoptic cable and lamps. Should your product prove to have such
defects within one year of the shipment. Seiler Instrument will repair or replace the product or component part without
charge. Should your LED Light Source product(s) need servicing under this warranty, please contact, Seiler Instrument
return authorization documentation. You should carefully pack unit in a sturdy carton and ship it to the factory. Please
include a note describing the defects, your name, telephone number and a return address. Warranty does not cover
equipment subject to misuse, accidental damage, normal wear and tear or if transferred to a new owner without authorization from Seiler Instrument. This warranty gives you specific legal rights and you may also have other rights that vary
from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to the factory. Your product will
be inspected and an estimate of repair charges will be submitted to you for approval. Payment must be received before
repairs are completed.
In the US: 800-489-2282 (toll free)
FAX number: 314-968-3601
Customer Service: 314-218-6336
10. END OF PRODUCT LIFE
We encourage our customers to recycle this product whenever possible. Disposal of this unit must be performed in accordance with the applicable local environmental regulations.
In the United States a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to manufacturer at the end of product
life.
11. TROUBLESHOOTING

Problem
The power indicator (refer to 4.1)
is not lit.
The power indicator is lit, but the
lamp will not ignite.
14

Solution
A. Check that the AC power cord is properly connected.
B. Check the unit fuses. If necessary, replace.
Turn intensity control know clockwise to increase light output intensity.

OWNERS RECORD
Model Number
Serial Number
Date Purchased
Location Purchased

NOTES

15

PRECISION MICROSCOPES
3433 Tree Court Industrial Blvd.
St. Louis, Missouri 63122
Toll Free: (800) 489-2282
Local: (314) 968-2282
Email: [email protected]
Web: www.seilerinst.com
Version 09/22/14