A
SEMINAR REPORT
ON
HY-WIRE CAR
Submitted in partial fulfillment of Award of the Degree of
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
Rajasthan Technical University Kota
(Session-2014-15)
Submitted To:
Submitted By:
Mr. RAGHAV SINGH
Assistant Professor
Deptt. Of Mech. Engineering
JAIRAM TANWAR
11ERIME029
B.Tech 8th Semester
DEPARTMENT OF MECHANICAL ENGINEERING
RAJASTHAN INSTITUTE OF ENGINEERING AND TECHNOLOGY
BHANKROTA,AJMER ROAD,JAIPUR-302026
CERTIFICATE
I hereby declare that this seminar, titled HY-WIRE CAR is being submitted in
partial fulfillment of the requirement for the reward of B. Tech. in Mechanical Engineering
with specialization in Manufacturing and Assembly in the department of Mechanical
Engineering, Rajasthan Institute of Engineering & Technology, Jaipur.
Dr. VINOD SINGH YADAV
Mr. RAGHAV SINGH
(Head of Department)
Assistent Professor
Deptt.Of Mech. Engg.
Deptt.Of Mech. Engg.
DEPARTMENT OF MECHANICAL ENGINEERIN
RAJASTHAN INSTITUTE OF ENGINEERING AND TECHNOLOGY
BHANKROTA,AJMER ROAD,JAIPUR-302026
ACKNOWLEDGEMENT
First of all, I would like to thank my course coordinator Mr. Raghav Singh,
(Assistant Professor, Dept. of Mechanical Engineering) for all the support, guidance and
encouragement throughout the course of my study. He devoted considerable time in guiding
and checking work and made valuable suggestions and correction in my draft. I would like to
thank my departmental head Dr. Vinod Singh Yadav
for guidance and providing the
facilities and assistance to carry out my work. I would also like to thank my colleagues at
Rajasthan Institute of Engineering & Technology, Jaipur for their suggestions and support at
various stages. At last but not the least, I would like to thank my parents as well as my family
for their constant encouragement and support.
JAIRAM TANWAR
B.Tech 8th Semester
Roll No.:- 11ERIME029
DEPARTMENT OF MECHANICAL ENGINEERING
RAJASTHAN INSTITUTE OF ENGINEERING AND TECHNOLOGY
BHANKROTA,AJMER ROAD,JAIPUR-302026
PREFACE
To attain a very high standard on average, it is essential to impart seminar right from
engineering to the specialized executive in every concern. Today due to advancement and
mass production, a very high skill is required, which can only be developed by proper
seminar report.
SEMINAR REPORT is the most important of an engineering student. Seminar
report is a way to implement theoretical knowledge to practical use, to become a successful
engineer. Practical Training is the way by which we can acquire skill to work in industry.
This seminar report is my own experience gained at our college RIET, I could
understand the importance of experience gained by practical on the working field. Thus it is
very necessary for mechanical engineering student.
Development of our country depends upon the development and growth in the field of
industries and technology. All industries depend upon machinery for production both in terms
of quality and upon quantity for a well developed industrial base. Every country needs new
and modern technique as well as experienced and qualified engineer. Such practical training
plays a great role in education of an engineering student especially of mechanical engineering
student.
CONTENTS
PRELIMINARY PAGE.i
CERTIFICATE ................................................ii
ACKNOWLEDGEMENT................iii
PREFACE.....................iv
S.N. TITLE
P.N.
CHAPTER:01
1.
INTRODUCTION.............................................................................................1
CHAPTER:02
2.
HY-WIRE CAR BASIC.......2
CHAPTER:03
3. POWER..............................................5
CHAPTER:04
4.
CONTROL.................................................9
CHAPTER:05
5.
HY-WIRE CAR SPECIFICATION ................13
CHAPTER:06
6.1 ADVANTAGE........................................................16
6.2 DISADVANTAGE..17
CHAPTER:07
7. FUTURE OF HY-WIRE........18
CHAPTER:08
8. CONCLUSION......19
CHAPTER:09
9. BIBLOGRAPHY......20
LIST OF FIGURE
FIGURE NAME
Fig.no.1GM,S sedan madel Hy-wire
Fig.no.2side view of car
Fig.no.3 hydrogen fuel cell
Fig.no. 4 hydrogen tank and fuel cell Stack in the wire
Fig.no. 5Gm diagram of the autonomy design
Fig.no.6The hy-wire x drive
Fig.no.7 The x- drive can slide of vehicle
PAGE NO.
01
03
05
06
08
09
10
