"Casting Process": Bachelor of Technology IN Mechanical Engineering

A
SEMINAR REPORT
ON
CASTING PROCESS
Submitted in partial fulfillment of Award of the Degree of
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
Rajasthan Technical University Kota
(Session-2014-15)
Submitted To:
Submitted By:
Mr. RAGHAV SINGH

Asst. Professor
Deptt. Of Mech. Engineering
PAVAN KUMAR KUMAWAT

11ERIME043
B.Tech 8th Semester
DEPARTMENT OF MECHANICAL ENGINEERING

RAJASTHAN INSTITUTE OF ENGINEERING AND TECHNOLOGY
BHANKROTA,AJMER ROAD,JAIPUR-302026
1
CERTIFICATE
I hereby declare that this seminar, titled CASTING PROCESS is being submitted in
partial fulfillment of the requirement for the reward of B. Tech. in Mechanical Engineering with
specialization in Manufacturing and Assembly in the department of Mechanical Engineering,
Rajasthan Institute of Engineering & Technology, Jaipur.
Date: 2 March 2015
Prof. VINOD SINGH YADAV
Mr. RAGHAV SINGH
(Head of Department)
Asset. Professor
Deptt.Of Mech. Engg.Deptt.Of Mech. Engg.
DEPARTMENT OF MECHANICAL ENGINEERIN

ACKNOWLEDGEMENT
First of all, I would like to thank my course coordinator Mr. Raghav Singh,(Assistant
Professor, Dept. of Mechanical Engineering) for all the support, guidance and encouragement
throughout the course of my study. He devoted considerable time in guiding and checking work
and made valuable suggestions and correction in my draft. I would like to thank my departmental
head Mr. Vinod Singh Yadav for guidance and providing the facilities and assistance to carry out
my work. I would also like to thank my colleagues at Rajasthan Institute of Engineering &
Technology, Jaipur for their suggestions and support at various stages. At last but not the least, I
would like to thank my parents as well as my family for their constant encouragement and
support.
Date: 2 March 2015
PAVAN KUMAR KUMAWAT

B.Tech 8th Semester
Roll No.:- 11ERIME043
DEPARTMENT OF MECHANICAL ENGINEERING

PREFACE
To attain a very high standard on average, it is essential to impart seminar right from
engineering to the specialized executive in every concern. Today due to advancement and mass
production, a very high skill is required, which can only be developed by proper seminar report.
SEMINAR REPORT is the most important of an engineering student. Seminar report is
a way to implement theoretical knowledge to practical use, to become a successful engineer.
Practical Training is the way by which we can acquire skill to work in industry.
This seminar report is my own experience gained at our college RIET, I could understand
the importance of experience gained by practical on the working field. Thus it is very necessary
for mechanical engineering student.
Development of our country depends upon the development and growth in the field of
industries and technology. All industries depend upon machinery for production both in terms of
quality and upon quantity for a well developed industrial base. Every country needs new and
modern technique as well as experienced and qualified engineer. Such practical training plays a
great role in education of an engineering student especially of mechanical engineering student.
CONTENTS
CERTIFICATE................................................ii
ACKNOWLEDGEMENT..............iii
PREFACE...................iv
S.N TITLE
P.N.
CHAPTER:01
1.
INTRODUCTION....................................................................................................1
CHAPTER:02
2.
CASTING PROCESS...2
2.1
BASIC STEPS.............2
2.2 APPLICATION.......3
CHAPTER:03S
3. TYPES OF CASTING.......................4
3.1 SAND CASTING.........................5
3.2 SHELL MOLD CASTING...7
3.3 EXPENDABLE MOLD CASTING.8
3.4 PERMANENT MOLD CASTING...9
3.5
INVESTMENT CASTING10
5
3.6 DIE CASTING....11

3.7 CENTRIFUGAL CASTING..13
3.8 VACCUM CASTING.....16
CHAPTER:04
4.
CASTING DEFECTS.................17
CHAPTER:05
5.
DIFFERENTS TYPES CASTING ADV. DISADV. ...............19
CHAPTER:06
6.
CASTING PROCESS APPLICATION......20
CHAPTER:07
7. METAL MELTING POINT TEMPRETURE.21
LIST OF FIGURE
FIGURE NAME
Casting process
Sand castind(animation)
Sand casting(description)
Shell mould casting
Expendable mold casting
Aluminum piston
Investment casting (description)
Die casting
Vertical, Horizontal casting
Centrifugal casting products
Vacuum casting (description)
Metallic projections
Cavities,Defectives,Inclusions
PAGE NO.
03
05
06
07
08
09
10
11
14
15
16
17
18
LIST OF TABLE
NAME
Diffetrent casting process
Casting process application
Metal melting point Temperature
PAGE NO.
19
20
21-22

"Casting Process": Bachelor of Technology IN Mechanical Engineering

Uploaded by

Copyright:

Available Formats

"Casting Process": Bachelor of Technology IN Mechanical Engineering

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

"Casting Process": Bachelor of Technology IN Mechanical Engineering

Uploaded by

Copyright:

Available Formats

A

Mr. RAGHAV SINGH

PAVAN KUMAR KUMAWAT

DEPARTMENT OF MECHANICAL ENGINEERING

Date: 2 March 2015

Prof. VINOD SINGH YADAV

Mr. RAGHAV SINGH

Deptt.Of Mech. Engg.Deptt.Of Mech. Engg.

DEPARTMENT OF MECHANICAL ENGINEERIN

Date: 2 March 2015

PAVAN KUMAR KUMAWAT

DEPARTMENT OF MECHANICAL ENGINEERING

3.6 DIE CASTING....11

DIFFERENTS TYPES CASTING ADV. DISADV. ...............19

CASTING PROCESS APPLICATION......20

You might also like