Datasheet Safir C GB

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

SAFIR C

- ETHERNET

DIGITAL INDICATOR
MULTI-COLOUR & MULTI-FUNCTION
Le sens de la mesure sur toute la gamme

F.T. : 230 A - 07/04

STANDARD SPECIFICATIONS

7 ETHERNET Communication

ELECTRICAL INPUT
E0 With
E1 Without (Up to 10 V or 20 mA)

MANUAL VERSION
0 French
1 English

SAFIR C

OPTIONS
O P00 Without
O P01 Shunt (quantity and values to be specified)
O P02 Tropicalization
O P00

Dans un souci damlioration du produit, ses spcifications peuvent tre modifies sans pravis. Spcifications subject to change without notice. Impression CentrImprim 36100 Issoudun

*3 display colours available


(green, amber or red)

S
S
S
S
S

*Universal input
Temperature, current, voltage, frequency
*Display of physical or electrical values
*2 isolated logic inputs
*1 isolated auxiliary power supply
*6 alarm thresholds
with display colour selection
*8 warning led in front panel
*Linearization on 20 segments
*Statistics and ratio calculations
*Auto/manu station, setpoint generator
*Configuration on keyboard
or through a software
*Infrared remote control transfer
UNIVERSAL DIGITAL INDICATOR
6 DIGITS
SAFIR C is a single channel digital indicator that
admits all input signal type used in the process
industry. It is the first unit which can admit all the
input signals such as process ones, direct
temperature, resistances and potentiometers, voltage
and current high or low level AC and DC, frequency,
tachometer and periodmeter.
In standard version, SAFIR C includes two logic inputs
and an auxiliary power supply 24 Vdc for transmitters
or 2-wire sensors.

COLOUR CHANGING
AT ANY ALARM POINT
WEB :http : // www.mcc-instrumentation.com
M.C.C. Socit Anonyme au capital de 320 000
333 855 096 RCS ISSOUDUN - SIRET 333 855 096 00033 - APE 332 B
Head office & plant

Ile-de-France Agency

Rue G. Massicot
F - 36100 ISSOUDUN
Tl. : 33 2 54 21 44 14
Fax : 33 2 54 03 17 69
e.mail : [email protected]

10, Av de Camberwell
F - 92330 SCEAUX
Tl. : 33 1 46 61 61 32
Fax : 33 1 46 60 47 67
e.mail : [email protected]

SAFIR C, that offers all the calculation and processing


functions of SAFIR model, such as linearization,
totalization, auto/manu, or setpoint generator, is
equipped with a colour-changing display.

The 6 digit-display colour is selected through


configuration and colour changing is achieved once
each preset alarm threshold has been reached.
Any combination is possible with the 3 colours : red,
amber and green, and the 6 software alarm points.

VISUALIZATION THROUGH
ETHERNET
SAFIR C is MCC first digital indicator that integrates
an embedded ETHERNET communication board.
In replacement of Modbus communication, this option
offers input signals and alarms status visualization
through a standard Web browser, without any specific
processing software.
This communication, immediately operational after IP
address recognition, provides remote changing of alarm
setpoints.
A standard RJ45 connector on SAFIR C terminals allows
the connection of the unit to the ETHERNET network.

Continuous display on one channel.


A 7-segment display, 6 digits of 13.6 mm height (green, amber or red)
8 red LEDS, status lights.

*
ETHERNET Communication*: RJ 45
In case of the ETHERNET option, slot 3 is equipped with a RJ 45
connector, with 2 leds for status visualization.

* : Incompatible Options

Continuous display on one channel.


A 7-segment display, 6 digits of 13.6 mm height (green, amber or red)
8 red LEDS, status lights.

*
ETHERNET Communication*: RJ 45
In case of the ETHERNET option, slot 3 is equipped with a RJ 45
connector, with 2 leds for status visualization.

* : Incompatible Options

SAFIR C

- ETHERNET

DIGITAL INDICATOR
MULTI-COLOUR & MULTI-FUNCTION

S
S
S
S
S

7 ETHERNET Communication

ELECTRICAL INPUT
E0 With
E1 Without (Up to 10 V or 20 mA)

MANUAL VERSION
0 French
1 English

SAFIR C

OPTIONS
O P00 Without
O P01 Shunt (quantity and values to be specified)
O P02 Tropicalization
O P00

Dans un soucis d'amlioration du produit, ses spcifications peuvent tre modifies sans pravis. Secifications subject to change without notice.

Le sens de la mesure sur toute la gamme

STANDARD SPECIFICATIONS
*3 display colours available
(green, amber or red)
*Universal input
Temperature, current, voltage, frequency
*Display of physical or electrical values
*2 isolated logic inputs
*1 isolated auxiliary power supply
*6 alarm thresholds
with display colour selection
*8 warning led in front panel
*Linearization on 20 segments
*Statistics and ratio calculations
*Auto/manu station, setpoint generator
*Configuration on keyboard
or through a software
*Infrared remote control transfer
UNIVERSAL DIGITAL INDICATOR
6 DIGITS
SAFIR C is a single channel digital indicator that
admits all input signal type used in the process
industry. It is the first unit which can admit all the
input signals such as process ones, direct
temperature, resistances and potentiometers, voltage
and current high or low level AC and DC, frequency,
tachometer and periodmeter.
In standard version, SAFIR C includes two logic inputs
and an auxiliary power supply 24 Vdc for transmitters
or 2-wire sensors.

COLOUR CHANGING
AT ANY ALARM POINT
MESURE CONTROLE COMMANDE
74, alle Helsinki
Z.E. Jean Monnet Nord
83500 La Seyne sur Mer - France
Tl : +33 (0)4 94 22 00 24
Fax : +33 (0)4 94 22 10 82
Email : [email protected]
Web : www.mcc-instrumentation.com

SAFIR C, that offers all the calculation and processing


functions of SAFIR model, such as linearization,
totalization, auto/manu, or setpoint generator, is
equipped with a colour-changing display.

The 6 digit-display colour is selected through


configuration and colour changing is achieved once
each preset alarm threshold has been reached.
Any combination is possible with the 3 colours : red,
amber and green, and the 6 software alarm points.

VISUALIZATION THROUGH
ETHERNET
SAFIR C is MCC first digital indicator that integrates
an embedded ETHERNET communication board.
In replacement of Modbus communication, this option
offers input signals and alarms status visualization
through a standard Web browser, without any specific
processing software.
This communication, immediately operational after IP
address recognition, provides remote changing of alarm
setpoints.
A standard RJ45 connector on SAFIR C terminals allows
the connection of the unit to the ETHERNET network.

You might also like