Electronics Lab Report

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7
At a glance
Powered by AI
The key takeaways are that the Electronics Laboratory provides undergraduate and graduate students a place to implement electronics circuits and projects practically and bring their skills up to industrial standards. It also allows students to simulate projects and check feasibility. Research is also conducted in the laboratory.

The purpose of the Electronics Laboratory is to provide a platform for undergraduate and graduate students to implement electronics circuits and projects practically, bring their skills up to industrial standards, provide an environment to simulate projects and check feasibility, and integrate academics and research.

The main equipment available in the laboratory includes oscilloscopes, signal generators, dual regulated variable power supplies, digital multimeters, and software like Proteus and PSPICE.

ELECTRONICSLABORATORY

ElectricalEngineeringDepartment, UniversityofEngineeringand
Technology|Mr.MuhammadMoghees&Mr.AliArshadNasir

Objective:
1. Provide a platform for undergraduate and graduate students for practical
implementation of Electronics Circuits and Projects.
2. Bring Engineering students to level of industrial standards in field of
Electronics circuits and Projects.
3. Provide students with an environment for simulation of projects and check their
feasibility.
4. This Laboratory provides the platform for the integration of academics and
research.

Lab Director: Dr. Tahir Izhar

ELECTRONICS LABORATORY

Ground Floor, Electrical Engineering Department,


University of Engineering and Technology, Lahore.

Electrical
University
ofyEngineering
and Technology,
Lahore.
[Type
yourEngineering
address] y Department,
[Type your phone
number]
[Type your e-mail
address]

VENUE:

[Pick the date]

1.
2.
3.
4.
5.
6.

[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]

Dr. Tahir Izhar


Mr. Muhammad Moghees
Mr. Ali Arshad Nasir
Miss Hifsa Bano
Miss Rimla Javaid
Miss Sidra Farid

Lab Staff:
1.
2.
3.
4.
5.
6.

Mr. Tariq Mahmood


Mr. Jamshed Khan
Mr. Rashid Mahmood
Mr. Nadir Ali Shah
Mr. Omer Draz
Mr. Mushtaq

Lab equipment:
1.
2.
3.
4.

Oscilloscope
Signal Generator
Dual Regulated Variable Power Supply
Digital Multimeter

Lab Softwares:
1.
2.
3.

Proteus
PSPICE
Electronic Workbench

ELECTRONICS LABORATORY

Email Contact

Electrical
University
ofyEngineering
and Technology,
Lahore.
[Type
yourEngineering
address] y Department,
[Type your phone
number]
[Type your e-mail
address]

Lab Engineer (Instructors)

[Pick the date]

1.
2.

Semiconductor Devices and Electronics


Analog Electronics and Devices

Courses during Spring 2008:


Semiconductor Devices and Electronics
Course Objectives:
1.
2.
3.

Introduction to fundamental electronic devices and their applications using


hardware and Proteus 6 Professional software
The electronic devices taught include PN junction diodes, zener diodes,
LEDs, photodiodes, BJTs, phototransistor, opto-coupler and MOSFETs
The course also includes a simple end semester project of designing a simple
DC power supply

Expected Outcomes:
1.
2.
3.
4.
5.
6.
7.

Understand the theory and applications of semiconductor diodes or PN


junction diodes
Understand the theory and applications of special purpose diodes e.g Zener
diode, LEDs and photodiodes
Understand the biasing techniques of BJTs
Understand the working and use of phototransistor and opto-coupler
Understand the drain characteristics of MOSFETs
Be able to simulate simple electronic circuits using Proteus 6 Professional
software
Design the circuit of a simple DC power supply of given specifications and
implement it on a PCB or vero board

ELECTRONICS LABORATORY

Electrical
Engineering
University
ofyEngineering
and Technology,
Lahore.
[Type your
address] y Department,
[Type your phone
number]
[Type your e-mail
address]

Courses Related to Laboratory:

[Pick the date]

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

Introduction to Proteus 6 Professional software


To study the V-I characteristics of PN-junction diode.
To study diodes clipping action.
To study diodes clamping action
To demonstrate the use of diode as a half wave rectifier
To demonstrate the use of diode as a full wave rectifier, and bridge rectifier
To demonstrate the operation of voltage multiplier.
Zener diodes characteristics and zener regulation under varying load and
with varying applied voltage.
To study V-I characteristics of LED
To construct a set of common base input output characteristic curve based
on practical measurements.
To construct a set of common emitter/collector input and output
characteristic curves based on practical measurements and to determine
current gain.
To construct relation between the light falling on phototransistor and
current flowing through it.
To demonstrate the use of opto-coupler as an insulating device.
To construct relation between the light falling on photodiode and current
flowing through it.
To investigate the drain characteristics of a MOSFET transistor.

ELECTRONICS LABORATORY

Electrical
Engineering
University
ofyEngineering
and Technology,
Lahore.
[Type
your
address] y Department,
[Type your phone
number]
[Type your e-mail
address]

List of Experiments:

[Pick the date]

A Novel Technique for Optimization of Generic SRM Drive


Yasir Saleem, Tahir Izhar
Conference on Electrical Engineering Lahore-Pakistan (ICEE 2007)
11-12 April 2007. IEEE Catalog No. 07EX1653, ISBN 1-4244-0893-8,
Library of Congress: 2006939760

Development of Zero Voltage Switching Resonant Converter Using Single


Switch
M. Shafique, Tahir Izhar
Submitted for presentation at International Conference on Electrical
Engineering Lahore-Pakistan (ICEE 2008)
24-25 March 2008.

Researchers:

Mr. Tahir Izhar


Mr. Yasir Saleem
Mr. M. Shafique

Academic Projects:

Sentinel controller emulation with strategic traffic management and remote


monitoring.
Micro-controller based controlled rectifier training module.
Conversion of DC voltage into 3 Phase AC voltages.

ELECTRONICS LABORATORY
LABORATORY
ELECTRONICS

Electrical
Engineering
University
ofyEngineering
and Technology,
Lahore.
[Type
your
address] y Department,
[Type your phone
number]
[Type your e-mail
address]

Research Conducted:

[Pick the date]

ELECTRONICS LABORATORY
LABORATORY
ELECTRONICS
Electrical
University
ofyEngineering
and Technology,
Lahore.
[Type
yourEngineering
address] y Department,
[Type your phone
number]
[Type your e-mail
address]

You might also like