Twdlcda24drf PDF

Product datasheet
TWDLCDA24DRF
Characteristics
compact PLC base Twido - 24 V DC supply - 14 I 24

V DC - 10 O relay
Main
Range of product
Twido
Product or component type
Compact base controller
Discrete I/O number
24
Discrete input number
14
Discrete input voltage
24 V
Discrete input voltage type
DC
Discrete output number
10 for relay
[Us] rated supply voltage
24 V DC
Use of slot
Memory cartridge or realtime clock cartridge
Data backed up
Internal RAM (lithium) 30 days, charging time = 10

h, battery life = 10 yr
Integrated connection type
Power supply
Serial link interface adaptor (RS232C/RS485)
Non isolated serial link mini DIN,
Modbus/character mode master/slave RTU/ASCII
(RS485) half duplex, 38,4 kbit/s
Complementary function
Event processing
PID
Complementary
Discrete input logic
Sink or source
Input voltage limits
20.4...28.8 V
Discrete input current
11 mA for I0.0 to I0.1

7 mA for I0.2 to I0.13
Input impedance
2100 Ohm for I0.0 to I0.1

3400 Ohm for I0.2 to I0.13
Filter time
150 s + programmed filter time for I0.6 to I0.13 at state 0

Insulation between channel and internal logic
1500 Vrms for 1 minute
Insulation resistance between channel
None
Minimum load
0.1 mA
Contact resistance
<= 30000 Ohm
Load current
2 A at 240 V AC inductive load, operating rate = 30 cyc/mn for relay output

2 A at 240 V AC resistive load, operating rate = 30 cyc/mn for relay output
2 A at 30 V DC inductive load, operating rate = 30 cyc/mn for relay output
2 A at 30 V DC resistive load, operating rate = 30 cyc/mn for relay output
Mechanical durability
>= 20000000 cycles for relay output
Electrical durability
>= 100000 cycles for relay output
Current consumption
36 mA at 5 V DC at state 1
I/O connection
Non-removable screw terminal block
Input/output number
<= 120 with spring terminal block with I/O expansion module
<= 152 with HE-10 connector with I/O expansion module
<= 88 with removable screw terminal block with I/O expansion module
Supply voltage limits
20.4...28.8 V
Inrush current
<= 40 A
Protection type
Power protection with internal fuse
Power consumption
<= 8.7 W
Insulation resistance
> 10 MOhm at 500 V, between I/O and earth terminals
1/4
Theinformationprovidedinthisdocumentationcontainsgeneraldescriptionsand/ortechnicalcharacteristicsoftheperformanceoftheproductscontainedherein.
Thisdocumentationisnotintendedasasubstituteforandisnottobeusedfordeterminingsuitabilityorreliabilityoftheseproductsforspecificuserapplications.
Itisthedutyofanysuchuserorintegratortoperformtheappropriateandcompleteriskanalysis,evaluationandtestingoftheproductswithrespecttotherelevantspecificapplicationorusethereof.
NeitherSchneiderElectricIndustriesSASnoranyofitsaffiliatesorsubsidiariesshallberesponsibleorliableformisuseoftheinformationcontainedherein.
Number of I/O expansion module 4
> 10 MOhm at 500 V, between supply and earth terminals

Program memory
3000 instructions
Exact time for 1 K instruction
1 ms
System overhead
0.5 ms
Memory description
Internal RAM, 128 counters, no floating, no trigonometrical

Internal RAM, 128 timers, no floating, no trigonometrical
Internal RAM, 256 internal bits, no floating, no trigonometrical
Internal RAM, 3000 internal words, no floating, no trigonometrical
Internal RAM, double words, no floating, no trigonometrical
Free slots
Realtime clock
Without
Counting input number
1 channel(s) at 20000 Hz 32 bits

3 channel(s) at 5000 Hz 16 bits
Analogue adjustment points
1 point adjustable from 0...1023

1 point adjustable from 0 to 511 points
Status LED
1 LED for user pilot light (STAT)

1 LED green for PWR
1 LED green for RUN
1 LED per channel green for I/O status
1 LED red for module error (ERR)
Product weight
0.305 kg
Environment
Immunity to microbreaks
10 ms
Dielectric strength
1500 V for 1 minute, between I/O and earth terminals

500 V for 1 minute, between supply and earth terminals
Product certifications
CSA
UL
Marking
CE
Ambient air temperature for operation
0...55 C
Ambient air temperature for storage
-25...70 C
Relative humidity
30...95 % without condensation
IP degree of protection
IP20
Operating altitude
0...2000 m
Storage altitude
0...3000 m
Vibration resistance
0.075 mm, 10...57 Hz mounting on: 35 mm symmetrical DIN rail

1 gn, 57...150 Hz mounting on: 35 mm symmetrical DIN rail
1.6 mm, 2...25 Hz mounting on: plate or panel with fixing kit
4 gn, 25...100 Hz mounting on: plate or panel with fixing kit
Shock resistance
15 gn for 11 ms
Contractual warranty
Period
18 months
Dimensions
8.5 mm (0.33 in) when the clamp is pulled out.
2/4
Minimum Clearances for a Compact Base and Expansion I/O Modules
Mounting Hole Layout
DC Power Supply Wiring Diagram
DC Source Inputs Wiring Diagrams

External Power
Internal Power
Max current: 250mA.
DC Sink Inputs Wiring Diagrams

External Power
3/4
Internal Power
Max current: 250mA.
Relay and Transistor Outputs Wiring Diagram
Performance Curves
I/O Usage Limits
(1)
Limit for TWDLCAA16DRF, TWDLCA24DRF, TWDLCA40DRF and TWDLD40DRF
(2)
All compact bases
4/4

Twdlcda24drf PDF

Uploaded by

Copyright:

Available Formats

Twdlcda24drf PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Twdlcda24drf PDF

Uploaded by

Copyright:

Available Formats

Product datasheet

compact PLC base Twido - 24 V DC supply - 14 I 24

Product or component type

Compact base controller

Discrete I/O number

Discrete input number

Discrete input voltage

Discrete input voltage type

Discrete output number

[Us] rated supply voltage

Memory cartridge or realtime clock cartridge

Internal RAM (lithium) 30 days, charging time = 10

Integrated connection type

Input voltage limits

Discrete input current

11 mA for I0.0 to I0.1

2100 Ohm for I0.0 to I0.1

150 s + programmed filter time for I0.6 to I0.13 at state 0

Insulation between channel and internal logic

1500 Vrms for 1 minute

Insulation resistance between channel

<= 30000 Ohm

2 A at 240 V AC inductive load, operating rate = 30 cyc/mn for relay output

>= 20000000 cycles for relay output

>= 100000 cycles for relay output

Non-removable screw terminal block

Supply voltage limits

Power protection with internal fuse

> 10 MOhm at 500 V, between I/O and earth terminals

Number of I/O expansion module 4

> 10 MOhm at 500 V, between supply and earth terminals

Exact time for 1 K instruction

Internal RAM, 128 counters, no floating, no trigonometrical

Counting input number

1 channel(s) at 20000 Hz 32 bits

Analogue adjustment points

1 point adjustable from 0...1023

1 LED for user pilot light (STAT)

1500 V for 1 minute, between I/O and earth terminals

Ambient air temperature for operation

Ambient air temperature for storage

30...95 % without condensation

0.075 mm, 10...57 Hz mounting on: 35 mm symmetrical DIN rail

8.5 mm (0.33 in) when the clamp is pulled out.

Minimum Clearances for a Compact Base and Expansion I/O Modules

Mounting Hole Layout

DC Power Supply Wiring Diagram

DC Source Inputs Wiring Diagrams

Max current: 250mA.

DC Sink Inputs Wiring Diagrams

Max current: 250mA.

Relay and Transistor Outputs Wiring Diagram

Limit for TWDLCAA16DRF, TWDLCA24DRF, TWDLCA40DRF and TWDLD40DRF

All compact bases

You might also like