Beam Analyzer 05

Analyzer USB
Multiple Scanning Knife-Edge Beam Profiler
Main Applications:
- Laser beam analysis:
Profile, beam size, position, power
- QC of lasers
- Monitor multiple beams centroids
High precision beam diagnostics for CW lasers

Patented technology: Unique tomographic image
reconstruction of 2D/3D images
Versatile: Meaure beam profile, beam size, beam shape,
position and power
Flexible: Wide spectral range, from 190nm

through 1800nm
Accurate: Beam sizes from 3m to 9mm

with 0.1m resolution
Compact: Based on USB 2.0 manifold box, measuring
head, software
DUMA OPTRONICS LTD.
M a i n F e a t u re s
New! 12 bit A/D

High resolution sampling for all modes simultaneously
Real time beam profiles, beam size and gaussian fit
2D/3D plots of beam in real time
Beam centroid and ellipticity, Power measurement
Direct data logging to Excel files
Data streaming via RS232 or TCP/IP
Save image and snapshot files
Automatic Pass/Fail analysis report
Windows control library for user's application program
1st Hazait St., P.O.Box 3370 Nesher 20306, Israel Tel:972-4-8200577 Fax: 972-4-8204190
We b s i t e : h t t p : / / w w w . d u m a . c o . i l E - m a i l : s a l e s @ d u m a . c o . i l
Patented Technology
The Beam Analyzer provides a bridging technology, producing the 3D intensity
reconstruction of CCD cameras, while being capable of measuring very
small spots at high resolution and huge dynamic range
The measuring technique is based on a multiple scanning knife-edge technology, combined with a tomographic image
reconstruction for the creation of the 2D/3D display. When the drum spins, the knife-edges cut across the beam in an
orthogonal plane to the direction of propagation. A stationary large detector inside the spinning drum measures light
intensity. For attenuation, when needed, a built-in distortion free optical filter is inserted between the spinning drum
and the detector. This technique provides the required attenuation without affecting beam quality. Each scanning
knife-edge is oriented at a different angle on the drum and moves across the beam path in a different direction as the
drum rotates. Consequently, during a single rotation of the drum, the instrument generates a set of profile curves, each
representing the intensity profile of the beam from a different direction. This data is the input for the tomographic
reconstruction algorithm to generate the 2D/3D intensity profile
of the beam.
The Beam Analyzer is offered in two types of measuring heads:
The BA7 uses seven individual knife-edges, providing more accurate
Knife edge
Filter
measurement of the true beam shape and dimensions by gathering
data from all 7 scans, while the BA3 uses only three knife-edges, and
is recommended for smaller beams measurement as well as for a
Laser Beam
Sensor
near-Gaussian beams. The more knife-edges, the greater the level of
detail obtained. For a beam distribution that is significantly
non-Gaussian the BA7 would reconstruct a plot that closely matches
Rotating drum
the real beam.
System Presentations
Beam Analyzer provides an extensive range of graphical presentations and analysis of laser beam parameters.
Beam Profiles and Width

Beam Analyzer control software simultaneously displays two profiles from two
orthogonal knife-edges, or show each profile individually for greater visual detail.
These main profiles, located at 45 degrees from the base of the head, are called
V and W.
Beam widths are digitally displayed for any three user selected clip levels, with up
to 0.1m resolution. The beam profile displays are auto-scaled (optional) to
maximize on-screen detail and resolution. Added detail can be obtained in a
special high-resolution mode. A Gaussian fit profile can be overlaid on profiles in
real time, while the correlation and fit values are displayed digitally. Zoom
function automatically increases the displayed spatial resolution.
Chart mode
It is frequently necessary to monitor the Beam Width (or
alternatively Beam Position) as a function of time. In Chart
Mode, these parameters can be viewed in strip chart format,
showing long term time-dependent stability or drift. The
measured data can be viewed on screen, saved or printed for
further analysis.
Beam Analyzer USB by DUMA OPTRONICS LTD.
System Presentations (cont.)

2D and 3D Intensity Plots
The Projection function provides either a 2D or a 3D plot of the beam intensity profile,
and is created using reconstructive tomography.
The 2D contour maps and the 3D isometric plots can be displayed with or without scan axis and grids. These plots
can be rotated along the beam optical axis, as well as be flipped. This feature enables the user to view the image
from various angles around the beam. It is also possible to control the 3D plot wire density, as well as view the 3D
figure projections on XZ and YZ planes
Data about the beam size and centroid position is displayed digitally along with centroid and beam size data.
2D Plot
3D Plot
Power Measurement
The beam power can be displayed either as a digital readout, or as a bar-type
display or in combination with an analog needle. Power presentation units
can be chosen as mW, W or dBm. The user can offset the zero to deactivate
the ambient light suppression. Pre-defined filter transmission files can be
selected. A test range can be defined and displayed to monitor beam power
within specific limits, audio alarms are optional.
Beam Position and Ellipticity

The beam centroid position is continuously monitored relative
to the center of the sensor area in real-time, along with beam
shape, ellipticity (major and minor axes) and angular
orientation. A zoom function is available for viewing the
footprint of small beams more clearly.
Observing beam position stability versus time is available upon
setting up of the Chart function to monitor beam position at the
selected clip level.
More Software Features

- Pass/Fail testing can be performed on measured results for
acceptance within specific tolerances.
- Data logging to a Text file or to Excel file
- Live Snapshot files replay for complete analysis of results
- Average setting, Zooming
- TCP/IP communication protocol and remote control
- Data transmission via RS-232 link to another computer
- Slave Mode controlling the measurements upon request
- Screen images can be saved as BMP/JPG files or printed out
- ActiveX software for integration in users application program
Beam Analyzer USB by DUMA OPTRONICS LTD.
Specifications
Manifold box drawing
BA3 / BA7 Head Drawing

BA7
15
68
11
162 Ref.
87
105
50
152.8 Ref.
31
121
3x M4
Thread
127
5.4
37.6
35.2
15
BA3
M22x0.5
Thread
3.5
15
M4 Thread
Cable outlet
13
15
2x M4 Thread
Deep 3.5
60
Dimensions are in mm
Sensor type
Wavelength range
Number of blades
Beam size range
3m-5mm
15m-10mm
15m-9mm
3m-3mm
15m-3mm
3m-5mm
15m-5mm
Beamwidth resolution
Silicon (Si), UV-Silicon (UV-Si)

InGaAs (IR) or IR Enhanced (IRE)
Si
350-1100nm
UV-Si
190-1100nm
IR
800-1800nm
IR Enhanced (E) 1200-2700nm
3 for BA3 heads, 7 for BA7 heads
for BA3-Si and BA3-UV

for BA7-Si and BA7-UV (Oval)
for BA7-Si and BA7-UV (Round)
for BA3-IR3 and BA3-IR3-E
for BA7-IR3 and BA7-IR3-E
for BA3-IR5
for BA7-IR5
1m for beams>100 m in size,
0.1m for beams<100m in size
Beamwidth accuracy
2%
Power accuracy
5% for Si and UV-Si heads,
10% for InGaAs heads
Power range
10W to 1W with filters for Si and
UV-Si heads, 10W to 5mW (no
filters provided) for the InGaAs
heads
Saturation
0.1 W/cm without filter, 20W/cm
with NG9 (Si and UV-Si )
Power resolution
0.1W
Position accuracy
15m
Position resolution
1m
PC interface
USB 2.0
Operating Temperature 10 to 35c
Weight
Sensor head 755 gr with cable,
manifold box 350 gr
Measurement rate
5Hz
CE Compliance
Host Computer Requirements

Pentium IV Core 2 Duo, 1GB RAM, 300MB Free HDD, 128 MB
16 bit VGA card, CD Drive any type, 1 free High Speed USB 2.0
port. OS: Windows XP/VISTA/7, 32 & 64 bit.
Ordering Information
The system consists of a measuring head with 2.5m long attached
cable, a post, USB 2.0 manifold Box, NG4 and NG9 filters in housing
(for Si and UV-Si heads), software on CD disk, carrying case.
BA3-Si
BA7-Si
BA3-UV
BA7-UV
BA3-IR3
BA3-IR3E
BA7-IR3
BA7-IR3E
BA3-IR5
BA7-IR5
3-blades, Si detector 5mm circular

7-blades, Si detector 9mm square
3-blades, UV-Si detector 5mm circular
7-blades, UV-Si detector 9mm square
3-blades, InGaAs detector 3mm circular
3-blades, InGaAs Enhanced 3mm circular
7-blades, InGaAs Enhanced 3mm circular
Optional Accessories
SAM3-B
Beam Sampler, with mounting adapter - sampling

reduction factor 0.0016 average
BA-Fiber
BA-Mount
A fiber adapter with an FC connector

A mount enabling head rotation about the optical axis
DUMA OPTRONICS LTD.
1st Hazait St., P.O.Box 3370 Nesher 20306, Israel Tel:972-4-8200577 Fax: 972-4-8204190
We b s i t e : h t t p : / / w w w . d u m a . c o . i l E - m a i l : s a l e s @ d u m a . c o . i l

Beam Analyzer 05

Uploaded by

Copyright:

Available Formats

Beam Analyzer 05

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Beam Analyzer 05

Uploaded by

Copyright:

Available Formats

Analyzer USB

Multiple Scanning Knife-Edge Beam Profiler

High precision beam diagnostics for CW lasers

Flexible: Wide spectral range, from 190nm

Accurate: Beam sizes from 3m to 9mm

DUMA OPTRONICS LTD.

New! 12 bit A/D

Beam Profiles and Width

Beam Analyzer USB by DUMA OPTRONICS LTD.

System Presentations (cont.)

Beam Position and Ellipticity

More Software Features

Beam Analyzer USB by DUMA OPTRONICS LTD.

BA3 / BA7 Head Drawing

Silicon (Si), UV-Silicon (UV-Si)

for BA3-Si and BA3-UV

Host Computer Requirements

3-blades, Si detector 5mm circular

Beam Sampler, with mounting adapter - sampling

A fiber adapter with an FC connector

DUMA OPTRONICS LTD.

You might also like