Scribd
Upload
214 views

Manual LSMW Utilizando BAPI

This document provides a step-by-step guide for using BAPIs in LSMW to migrate purchase order data into SAP. It details the necessary pre-requisites and outlines 26 steps for setting up and executing the process, including defining the business object and method, configuring IDoc inbound processing in LSMW, maintaining source structures and fields, mapping fields, assigning files, reading, converting and validating the data, and generating and monitoring the IDoc. The example uses BAPI BUS2012 and method CreateFromData to create a purchase order from external data.

Uploaded by

dolnic
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
214 views

Manual LSMW Utilizando BAPI

This document provides a step-by-step guide for using BAPIs in LSMW to migrate purchase order data into SAP. It details the necessary pre-requisites and outlines 26 steps for setting up and executing the process, including defining the business object and method, configuring IDoc inbound processing in LSMW, maintaining source structures and fields, mapping fields, assigning files, reading, converting and validating the data, and generating and monitoring the IDoc. The example uses BAPI BUS2012 and method CreateFromData to create a purchase order from external data.

Uploaded by

dolnic
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 17

Check out this link:

http://help.sap.com/saphelp_erp2004/helpdata/en/d4/0a43a124e8924ea890cf0855860db5/conte
nt.htm

Step-by-Step Guide for using BAPI in LSMW


Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the
purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business
Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type:

PORDCR

Basic IDoc Type: PORDCR02


Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name

4. Press ENTER
5. Following screen appears:

6. On the left side of the screen, Expand the PurchaseOrder.

7. Select PurchaseOrder and double-click on the same for details.

Building LSMW using BAPI:


1.

Go to Transaction LSMW.

2.

Enter the Project, Subproject and Object information and click on CREATE.

3.

Enter the descriptions for Project, Subproject and Object as prompted.

4.

Now select Settings IDoc Inbound Processing

5.

IDoc Inbound Processing screen appears. Enter the required details as shown below:

6.

Click on Activate IDoc Inbound Processing.

7.

Click on Yes when prompted for Activate IDoc Inbound?

8.

Hit on Back to return to the main screen.

9.

Click on Continue (F8). Following Screen appears:

10. Select the Step 1 Maintain Object Attributes and select Execute.

11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER

12. Save and click on BACK button. Following information message is displayed.

13. Now select step 2 Maintain Source Structures and click Execute.

14. In this step, we need to maintain the source structure. In our example, lets consider the
example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA
and click on Create again to create the child structure. Following popup appears:

Select Lower Level and click on Continue. Enter the Item data structure name.

Click Save and hit BACK button to go to the main screen.

15. Select step 3 Maintain Source Fields and hit execute.


16. Enter the fields as shown below:

17. Click SAVE and return to main screen.


18. Select step 4 Maintain Structure Relations and click Execute.

Select E1PORDCR and click on CREATE RelationShip. Following screen appears:

Select HEADERDATA and hit ENTER


Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.

Click Save and return to main screen.


19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain
the Field Mapping as seen below:

20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test
file with the same structure as defined earlier).

Save and return to main screen.


21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the
structures.

Save and return to the main screen.


22. Select the step Read Data and click on Execute.

Click on Execute.

Return to the main screen.


23. Select the step Display read data and click on execute.

Click on the structure name to get the field level values.

24. Return to main screen and now select Convert Data.

25. Return to the main screen and select Display Converted data.

26. Return to main screen and select Start IDoc generation.

27. Now select the step Start IDoc Processing on the main screen.

28. Return to main screen and click on Create IDoc overview. Here the data record and status
records of the IDoc could be viewed:

You might also like