Raytek Mi Data Sheet
Uploaded by
mateusT850Raytek Mi Data Sheet
Uploaded by
mateusT850RAYTEK COMPACT SERIES
MI
Noncontact Temperature Measurement for Industrial Applications
MI Highlights
n
n
n
n
Small sensing head fits where other sensors cant
T
hree Ambient operating ranges
MID 85C (185F) MIC 125C (257F) MIH 180C (356F)
5-digit backlit LCD user interface
A
djustable Emissivity, Peak Hold, Valley Hold and
Averaging functions
Measurement Specifications
Spectral Response:
Model
LT (Low Temp.)
8 to 14 microns
Optical Resolution:
LT
10:1, 22:1
Temperature Range:
Model
LT
-40C to 600C (-40F to 1112F);
-25C to 600C for J-thermocouple output
1% of reading or 1C,
whichever is greater
Thermocouple output accuracy
1% of reading or 2.5C,
whichever is greater
0.5% of reading or 0.5C (1F),
whichever is greater
1% accuracy from -40C to 600C (-40F to 1112F)
10:1, 22:1 optics
Powered by 12-24 VDC at 100 mA
Accessories for cooling and air purging
Remote electronics box
System Accuracy:
R
S-232 or optional RS-485 digital communications
for remote setup and monitoring
System Repeatability:
The Raytek MI is a two-piece infrared temperature
measurement system with miniature sensing head and
separate electronics. The sensor is small enough to be
installed just about anywhere, yet it performs as well as much
larger systems. The MI electronics include a host of signal
processing features which you wont normally find in systems
in this price range, including Emissivity, Peak Hold, Valley
Hold, and Averaging function, all of which are adjustable on
the 5-digit LCD user interface.
Designed for a wide range of applications where the target
temperature is in the -40C to 600C (-40F to 1,112F)
range, the sensor is housed in a rugged stainless steel
enclosure to ensure long term performance, even in harsh
industrial environments with ambient temperatures up to
180C (356F) without cooling. Although the MI unit is small
in size, it still has the features you need, with 1% accuracy,
10:1 or 22:1 optics and user selectable output signals. And
the MI systems response time is as fast or faster than many
advanced systems.
Temperature Coefficient:
MID
0.15K per K or 0.15% per K,
MIC
0.05K per K or 0.05% per K
MIH
0.05K per K or 0.05% per K
whichever is greater*
Temperature Resolution:
LT
0.3C or 0.5F
System Response Time: 150ms (95%)
Emissivity:
0.100 to 1.100 digitally adjustable
increments of .001
Transmission:
0.100 to 1.100 digitally adjustable
increments of .001
Signal Processing:
Peak hold, valley hold, variable
averaging filter, adjustable up to
998 seconds
* NIST/DKD certified models available with 0.05K per K
Nominal Optical Specifications
Even more features are available with the RS-232 or optional
RS-485 communications and the DataTemp Multidrop
Software. These features include remote control and
monitoring of all sensor variables, a 5V alarm signal triggered
by a target temperature or head ambient temperature, an
8-position recipe table that can be easily interfaced to
an external control system, an external reset signal input
for signal processing, and even external inputs for analog
emissivity adjustment or reflected energy compensation.
The MI units miniature size and low cost make it ideal for
installation at multiple points along your process. Accurate.
Rugged. Easy to install. Affordable. With the MI, precision
infrared temperature measurement is now an economical
alternative.
Raytek MI miniature sensor, maximum performance!
D:S is the optical resolution expressed as a ratio of the distance to
the measurement spot divided by the diameter of the spot.
Optical resolution for the MI is 10:1, 22:1.
Nominal spot size based on 90% energy.
Electrical Specifications
Outputs:
Scalable 4-20mA, 0-20mA,
0-5V, J or K thermocouple
Alarm Relay:
10mV/C Head Ambient signal
Cable Length:
1m (3.2ft) standard,
3m (10ft), 8m (26ft) and
15m (50ft) lengths available
Output Impedance
(T/C output):
20 ohms
Minimum Load Impedance
(mV output):
100K ohms
Maximum Loop Impedance
(mA output):
500 ohms with 24 VDC
power supply
Current Draw:
100 mA
Power Supply:
12-24 VDC
Sensor Specifications
Environmental Rating:
NEMA-4 (IP 65)
Ambient Temperature Range:
MID
MIC
MIH
0C to 85C (32F to 185F)
0C to 125C (32F to 257F)
0C to 180C (32F to 356F)
Electronics housing
0C to 65C (32F to 150F)
Storage Temperature:
-18C to 85C (0F to 185F)
Relative Humidity:
10 to 95%, non-condensing
Accessories / Options
Each standard MI package includes a sensing head, one
mounting nut, 1m (3.2ft) of cable, die-cast housing with
premounted electronics, and an operators manual. Longer
cables up to 15m (50ft) maximum are available and must be
specified at time of order.
Adjustable or fixed
mounting bracket for
sensing head (XXXMIACAB or
XXXMIACFB)
Air purge jacket to keep lens or right
angle mirror clean (XXXMIACAJ)
Viewport accessory
for MI electronics
(XXXMIACV)
Construction:
Sensing head
Stainless steel
Electronics housing
Zinc, die-cast
Weight:
Sensing head (w/1 m cable) 50g (1.75oz)
Electronics housing
270g (9.5oz)
Shock IEC 68-2-27 (MIC ST 810D)-50gs, 11ms on any axis
Vibration 68-2-27 (MIC ST 810D)-3gs, 11-200Hz on any axis
Sensor Dimensions
Sensing Head
Preinstalled cable
standard cable length
1 m (3.2 ft) 5 (.2)
Electronics Housing
DataTemp Multidrop
software puts you in control.
Multidrop Network Installation
RS-485 sensors can be configured in a multidrop network or
point-to-point installation. In multidrop networks, a dedicated
PC with DataTemp Multidrop software supports online system
monitoring and configuration.
Model
Optics
Temperature
Range
Options
RAYMI
Model
RAYMI
Code A
Description
Modular Infrared Thermometer
Model
Standard model includes selectable 4-20mA/0-20mA, 0-5 V, or J/K thermocouple output and head temperature output
85C (185F) ambient operating range .15k/k temperature coefficient
MID with DKD/NIST calibration certificate and optimized performance 125C (257F) ambient operating range
.05k/k temperature coefficient
MID with DKD/NIST calibration certificate and optimized performance 180C (356F) ambient operating range
.05k/k temperature coefficient
Code B
10
20
Code C
LT
Code D
4
CB 3
CB8
CB15
V
Typical
Model
Number
Optics
10:1 D:S sensor with 1m wiring cable
22:1 D:S sensor with 1m wiring cable
Temperature Range
-40C to 600C (-40F to 1112F); 8 14 microns
Options
RS-485 communication for multidrop networks
3m (9.8) cable
8m (26) cable
15m (49) cable
Display window for electronics housing
RAYMIH10LTCB3
The Worldwide Leader in Noncontact Temperature Measurement
Raytek Corporation
Worldwide Headquarters
Santa Cruz, CA USA
Tel: 1 800 227 8074 (USA and Canada, only)
1 831 458 3900
[email protected]
European Headquarters
Berlin, Germany
France
Tel: 49 30 4 78 00 80 Tel: 0800 888 244
[email protected]
[email protected]
www.raytek.com
United Kingdom
Tel: +44 1908 630 800
[email protected]
China Headquarters
Beijing, China
Tel: 8610 6438 4691
[email protected]
To find a Raytek office near you, please visit www.raytek.com
Worldwide Service
Raytek offers services, including repair and calibration.
For more information, contact your local office or e-mail [email protected]
2008 Raytek Corporation (3111626 Rev. H) 8/2008
Raytek and the Raytek logo are registered trademarks of Raytek Corporation.
Specifications subject to change without notice.
