Chem Tech Series Brochure en
Chem Tech Series Brochure en
Chem Tech Series Brochure en
pulsafeeder.com
XP Series Only
Pulsafeeder Expertise
CM
In the water conditioning market the CHEM-TECH product line has addressed the needs of professionals for
over 50 years through products that are:
Reliable: Products, people and services that are dependable trustworthy and available when needed.
Easy-to-Use: Simple, intuitive products to operate and maintain, with as few parts as possible.
Affordable: True value, including initial purchase, operating costs and maintenance leading up to total cost
of ownership benefit.
Long-lasting: Robust, durable components, products and systems designed and manufactured to withstand
the conditions of service.
Product Specifications
Materials of Construction
Typical Applications
Car Wash
Water Conditioning
Water Treatment
Ware Wash
17
16
14
13
11
10
11
140
10
120
100
Series 200
80
XP
60
5.5
XPV
Prime Performance and Series 100-150
Including 100D-150D
40
4
3
20
0
Flow (GPD)
Pressure (BAR)
Pressure (PSI)
160
Flow (LPH)
The CHEM-TECH family is comprised of either mechanical diaphragm metering pumps and peristaltic
metering pumps.
Diaphragm Pumps- The key element which differentiates these pumps from other types is the elastomer
diaphragm. This diaphragm is sealed against the reagent head forming a seal-less, leak free pumping
chamber. The motor is connected to the diaphragm to create the pumping motion. As the diaphragm
moves away from the face of the reagent head, it creates a vacuum which closes the discharge check
valve and opens the suction check valve, drawing the pumped fluid into the pumping chamber. As the
motor forces the diaphragm toward the face of the reagent head, the suction check valve closes and the
discharge check valve opens allowing the liquid to flow out the discharge valve.
Peristaltic Pumps- The head on a peristaltic pump consists of a piece of tubing and a roller assembly
that moves chemical around the circular head. The engineered composite, three piece roller assembly
reduces friction, while allowing a greater load capacity and longer tube life. No tools are required to
remove the tubing; Stainless Steel wing bolts allow for quick and easy tube replacement when needed.
Computer Generated
Head Design
No Tools Required
Electronic Control
Large Motor Bearings
Metal Bearing
Housing
XPV Series
200 Series
Diaphragm Pumps
Bleed Valve Assembly
Peristaltic Pumps
Automatic Degassing Technology
Prime Performance Series
Degas valve system
XP and XPV Series
Mixed fluid capable
Inherently degassing
Self priming
Pre-Engineered Feed
System
Valve Options
Pressure Relief
Back Pressure
Anti-Siphon
Air Bleed
Discharge Drain
Typical Applications
KOPkits
When you need a part, youve
got it. A KOPkit can help you cut
downtime and put you back in
business fast.
Calibration Kit
Calibration columns are used on
the supply side of the pump to
permit flow calibration.
Corporation Stop
Pulsafeeders high quality brass
corporation stop and nozzle
assembly disperses chemical
into the center of a line for even
mixing.
Pump Shelf
Designed to safely and securely
mount your metering pumps on a
wall or level surface and contain
any potential spills.
Solution Tanks
Available in sizes from 15 to 500
gallon.
pulsafeeder.com
An IDEX Water & Wastewater Business
27101 Airport Rd
Punta Gorda, FL 33982
Phone: ++1(941) 575-3800
Fax: ++1 (941) 575-4085
CTI007 H11