Scribd
Upload
217 views

GOT Program Restore Using GT Designer3

This document provides instructions for restoring all program files to a GOT (Graphic Operation Terminal) using GT Designer 3 software. The procedure involves connecting a PC running GT Designer 3 to the GOT via USB, opening a backup project file, selecting the USB communication method, and using the "Write to GOT" function to restore all files and programming to the GOT. Once complete, the GOT will reboot with all programs and settings restored from the backup file.

Uploaded by

Jacob B Chacko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
217 views

GOT Program Restore Using GT Designer3

This document provides instructions for restoring all program files to a GOT (Graphic Operation Terminal) using GT Designer 3 software. The procedure involves connecting a PC running GT Designer 3 to the GOT via USB, opening a backup project file, selecting the USB communication method, and using the "Write to GOT" function to restore all files and programming to the GOT. Once complete, the GOT will reboot with all programs and settings restored from the backup file.

Uploaded by

Jacob B Chacko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Mitsubishi Electric Automation, Inc.

500 Corporate Woods Parkway, Vernon Hills, IL 60061 phone: 847.478.2100


An ISO9001 Certified Company

How To Procedure
GOT Program Restore using GT Designer 3
Revision: A
Purpose: To restore all program files to the GOT

Required Tools:

PC with GT Designer 3 installed


Generic USB Mini B cable

Consumable Parts:

None

1|Page

R72-121-SLSASG-005

Mitsubishi Electric Automation, Inc.


500 Corporate Woods Parkway, Vernon Hills, IL 60061 phone: 847.478.2100
An ISO9001 Certified Company

Task 1: Connect the USB MINI B cable between PCs USB port and GT1000 Front USB port.
When cable is connected for the first time the USB Driver will automatically be installed.
.

Pull here to
access the
USB port

2|Page

R72-121-SLSASG-005

Pull here to
access the
USB port

Mitsubishi Electric Automation, Inc.


500 Corporate Woods Parkway, Vernon Hills, IL 60061 phone: 847.478.2100
An ISO9001 Certified Company

Task 2: Open the GT Designer3 back up saved Project File from hard drive location and double click on
the [*.GTW] file.

Task 3: Select the communication method


Step1: Follow this step to set the communication Method to connect the personal computer to the GOT
with a USB cable.
a) Select [Communication Configuration] from the Communication Menu.

3|Page

R72-121-SLSASG-005

Mitsubishi Electric Automation, Inc.


500 Corporate Woods Parkway, Vernon Hills, IL 60061 phone: 847.478.2100
An ISO9001 Certified Company

b) Select [USB]

c) Click on the [Test] Button


d) The following Window should appear. If it does not, disconnect the USB cable from PC and
reconnnect to try again. Click on the [OK] button to close.

e) Click on the [OK] button to close Communication Configuration Window.

4|Page

R72-121-SLSASG-005

Mitsubishi Electric Automation, Inc.


500 Corporate Woods Parkway, Vernon Hills, IL 60061 phone: 847.478.2100
An ISO9001 Certified Company

Task4: Write to GOT


Step 1: From the [Communication] Menu, Select [Write to GOT]

Step 2: Click the [OK] Button, USB should be the Communication method selected.

5|Page

R72-121-SLSASG-005

Mitsubishi Electric Automation, Inc.


500 Corporate Woods Parkway, Vernon Hills, IL 60061 phone: 847.478.2100
An ISO9001 Certified Company

Step 3: Click the [GOT Write] button. All other items should be kept at Default as shown here except the
two items below.
1. If a Compact Flash Card is installed and the Project Files are too large to fit in the [C:
Built-in Flash Memory], Select [A: Standard CF Card] in the Destination Drive
Selection. Item a.
2. If this is a NEW GOT, the selection [Include required OS in the project data] must also
be selected. Item b.

b
a

6|Page

R72-121-SLSASG-005

Mitsubishi Electric Automation, Inc.


500 Corporate Woods Parkway, Vernon Hills, IL 60061 phone: 847.478.2100
An ISO9001 Certified Company

Step 4: The following Window will appear.

Click the [YES] button to continue


When Finished the following window will appear and the GOT Hardware will Reboot itself.

Click the [OK] button to continue

7|Page

R72-121-SLSASG-005

Mitsubishi Electric Automation, Inc.


500 Corporate Woods Parkway, Vernon Hills, IL 60061 phone: 847.478.2100
An ISO9001 Certified Company

The Communicate with GOT Window will now appear and show you the Write Data Size and the
Write Drive Information.

Step 5: Click the [Close] button

Task5: Recycle the GOT Power


If the GOT prompts you to Cycle Power do so at this time. Otherwise the Restore procedure is
complete.

8|Page

R72-121-SLSASG-005

You might also like