GEP80SP4

GEP80SP4
Diesel Generator Set

Exclusively from your Cat dealer
EU Stage II Emissions Compliant
Output Ratings
Prime*
Standby*
72.0 kVA
80.0 kVA
72.0 kW
80.0 kW
82.0 kVA
90.0 kVA
82.0 kW
90.0 kW
Generating Set Model

220-240V, 50 Hz
240/120V, 60 Hz
* Refer to ratings definitions on page 4.

Ratings at 1.0 power factor.
Technical Data
Engine Make & Model:
Perkins 1104C-44TAG2
Alternator Model:
LL3014F
Base Frame Type:
Fbc2 - (08Hr)
Circuit Breaker Type:
3 Pole MCCB
Frequency:
50 Hz
60 Hz
Engine Speed: RPM
1500
1800
Fuel Tank Capacity: litres (US gal)
250 (66.0)
Fuel Consumption, Prime: l/hr (US gal/hr)
21.0 (5.5)
25.7 (6.8)
Fuel Consumption, Standby : l/hr (US gal/hr)
23.5 (6.2)
28.4 (7.5)
Engine Techncial Data

Physical Data
Lubrication system
Perkins
Manufacturer:
Model:
Oil Filter Type:
1104C-44TAG2
4 / In Line
No. of Cylinders/Alignment:
4 Stroke
Cycle:
Induction:
Turbocharged Air To Air

Charge Cooled
Cooling Method:
Spin-On, Full Flow
Total Oil Capacity l (US gal):
8.0 (2.1)
Oil Pan l (US gal):
7.0 (1.8)
Oil Type:
API CC/SE
Cooling Method:
Water
Water
Governing Type:
Electronic
Governing Class:
ISO 8528 G2
18.3:1
Compression Ratio:
Displacement: l (cu.in)
4.4 (268.5)
Bore/Stroke: mm (in)
105.0 (4.1)/127.0 (5.0)
Moment of Inertia: kg m (lb. in)
1.51 (5160)
Engine Speed: RPM

Gross Engine Power: kW (hp)
-Standby:
-Prime:
12/Negative
-Battery Charger Amps:
65
Weight: kg (lb) - Dry:
500 (1102)
- Wet:
520 (1146)
50 Hz
60 Hz
Air Filter Type:
Replaceable Element
-Standby:
6.3 (221)
7.8 (275)
-Prime:
6.0 (212)
7.8 (274)
Max. Combustion Air Intake

Restriction: kPa (in H2O)
8.0 (32.1)
8.0 (32.1)
Radiator Cooling Air Flow:

m/min (cfm)
187.8 (6632) 244.2 (8624)
External Restriction to
Cooling Air Flow: Pa (in H2O)
Cooling System
125 (0.5)
125 (0.5)
Water Pump Type:
103.0 (138.0)
117.5 (158.0)
93.6 (126.0)
106.8 (143.0)
1873.0 (271.7) 1781.0 (258.3)

1702.0 (246.9) 1619.0 (234.8)
8.2
13.8
Fuel System
Replaceable Element
Recommended Fuel:
Class A2 Diesel
Fuel Consumption: l/hr (US gal/hr)
110%
Load
100%
Load
75%
Load
50%
Load
50 Hz
23.5 (6.2)
21.0 (5.5)
15.8 (4.2)
11.0 (2.9)
60 Hz
28.4 (7.5)
25.7 (6.8)
19.2 (5.1)
13.7 (3.6)
50 Hz
23.5 (6.2)
17.4 (4.6)
12.0 (3.2)
60 Hz
28.4 (7.5)
21.0 (5.5)
14.7 (3.9)
Prime
Standby
(based on diesel fuel with a specific gravity of 0.85 and conforming to

BS2869, Class A2)
50 Hz
60 Hz
17.5 (4.6)
17.5 (4.6)
Cooling System Capacity:

l (US gal)
1800
-Prime:
Regenerative Power: kW
Combustion Air Flow:

m/min (cfm)
1500
-Standby:
Fuel Filter Type:
Air System
60 Hz
BMEP: kPa (psi)
Engine Electrical System:

-Voltage/Ground:
50 Hz
Performance
Centrifugal
50 Hz
Exhaust System
Silencer Type:
Industrial
Silencer Noise Reduction
SD50 (1)
Pressure Drop Across

Silencer System: kPa (in Hg)
Heat Rejected to Water &

Lube Oil: kW (Btu/min)
60 Hz
2.10 (0.620) 3.21 (0.948)
Silencer Noise Reduction

Level: dB
-Standby:
50.7 (2883)
64.0 (3640)
-Prime:
46.1 (2622)
57.7 (3281)
Heat Radiation to Room:

kW (Btu/min)
-Standby:
7.5 (427)
9.4 (535)
Exhaust Gas Flow:
-Prime:
6.8 (387)
8.5 (483)
m/min (cfm)
2.8 (3.8)
4.8 (6.4)
Radiator Fan Load: kW (hp)
22
17
18.0 (5.3)
15.0 (4.4)
-Standby:
15.0 (530)
18.0 (636)
-Prime:
14.0 (494)
17.0 (600)
-Standby:
494 (921)
517 (963)
-Prime:
463 (865)
469 (876)
Max. Allowable Back

Pressure: kPa (in. Hg)
Exhaust Gas Temperature: C (F)

m/min (cfm)
Cooling system designed to operate in ambient conditions up to 50C
(122F). Contact your local Olympian dealer for power ratings at specific
site conditions.
Consult your Olympian representative for more information
Alternator Performance Data

50 Hz
Data Item
240V
Motor Starting
Capability* kVA
230V
60 Hz
220V
220V/110V
240V/120V
285
269
254
223
252
Xd
1.625
1.769
1.934
2.640
2.220
X'd
0.098
0.106
0.116
0.160
0.130
X''d
0.058
0.063
0.068
0.090
0.080
Short Circuit
Capacity** %
Reactances:
Per Unit
Reactances shown are applicable to standby ratings.

* Based on 30% voltage dip.
** With optional Permanent Magnet generator or AREP excitation.
Alternator Technical Data

Physical Data
Manufacturer:
Model:
Operating Data
OLYMPIAN
LL3014F
Overspeed: RPM
2250
Voltage Regulation (steady state) (%):
+/- 0.5
No. of Bearings:
Wave Form NEMA = TIF:
Insulation Class:
Wave Form IEC = THF:
2.0%
Total Harmonic Content LL/LN:
4.0%
Winding Pitch - Code:

Wires:
Ingress Protection Rating:
Excitation System:
AVR Model:
2/3 - 6
12
IP23
SHUNT
R250
Radio Interference:
50
Supression is in line with European

Standard EN61000-6
Radiant Heat: kW (Btu/min)

-50 Hz:
12.6 (717)
-60 Hz:
16.8 (955)
Consult your Olympian representative for more information
Technical Data
1 Phase Ratings and Performance at 50 Hz, 1500 RPM
Voltage
1 Phase Ratings and Performance at 60 Hz, 1800 RPM
Voltage
Standby
Prime
kVA
kW
kVA
kW
240V
72.0
72.0
80.0
80.0
230V
72.0
72.0
80.0
80.0
220V
72.0
72.0
80.0
80.0
Prime
Standby
kVA
kW
kVA
kW
220V/110V
82.0
82.0
90.0
90.0
240V/120V
82.0
82.0
90.0
90.0
Weights & Dimensions

Weights: kg (lb)
Dimensions: mm (in)
Net (+ lube oil)
1292 (2849)
Length
2089 (82.2)
Wet (+ lube oil & coolant)
1310 (2888)
Width
1120 (44.1)
Fuel, lube oil & coolant
1522 (3355)
Height
1367 (53.8)
Note: General configuration not to be used

for installation.
See general dimension
drawings for detail.
Definitions
General Data
Standby Rating
Documents
These ratings are applicable for supplying continuous electrical

power (at variable load) in the event of a utility power failure. No
overload is permitted on these ratings. The alternator on this model
is peak continuous rated (as defined in ISO 8528-3).
A full set of operation and maintenance manuals and circuit wiring

diagrams.
Prime Rating
BS4999, BS5000, BSEN60034, BSEN61000, IEC60034.
These ratings are applicable for supplying continuous electrical

power (at variable load) in lieu of commercially purchased power.
There is no limitation to the annual hours of operation and this
model can supply 10% overload power for 1 hour in 12 hours.
Warranty
Quality Standards
All equipment carries full manufacturer's warranty.
Standard Reference Conditions

Note: Standard reference conditions 25C (77F) air inlet temp,
100m (328ft) A.S.L. 30% relative humidity. Fuel consumption data
at full load with diesel fuel with specific gravity of 0.85 and
conforming to BS2869: 1998, Class A2.
Market: International
LEHF0126-00
Information contained in this publication may be considered confidential.

Discretion is recommended when distributing.
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, their respective logos OLYMPIAN, ''Caterpillar Yellow'' and the "Power Edge" trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
www.CAT-ElectricPower.com
2010 Caterpillar
All rights reserved.
Printed in U.S.A.

GEP80SP4

Uploaded by

Copyright:

Available Formats

GEP80SP4

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GEP80SP4

Uploaded by

Copyright:

Available Formats

GEP80SP4

Diesel Generator Set

EU Stage II Emissions Compliant

Generating Set Model

* Refer to ratings definitions on page 4.

Base Frame Type:

Circuit Breaker Type:

Engine Speed: RPM

Fuel Tank Capacity: litres (US gal)

Fuel Consumption, Prime: l/hr (US gal/hr)

Fuel Consumption, Standby : l/hr (US gal/hr)

Engine Techncial Data

Oil Filter Type:

Turbocharged Air To Air

Spin-On, Full Flow

Total Oil Capacity l (US gal):

Oil Pan l (US gal):

105.0 (4.1)/127.0 (5.0)

Moment of Inertia: kg m (lb. in)

Engine Speed: RPM

-Battery Charger Amps:

Weight: kg (lb) - Dry:

Air Filter Type:

Max. Combustion Air Intake

Radiator Cooling Air Flow:

187.8 (6632) 244.2 (8624)

Water Pump Type:

1873.0 (271.7) 1781.0 (258.3)

(based on diesel fuel with a specific gravity of 0.85 and conforming to

Cooling System Capacity:

Combustion Air Flow:

Fuel Filter Type:

BMEP: kPa (psi)

Engine Electrical System:

Silencer Noise Reduction

Pressure Drop Across

Heat Rejected to Water &

2.10 (0.620) 3.21 (0.948)

Silencer Noise Reduction

Heat Radiation to Room:

Exhaust Gas Flow:

Radiator Fan Load: kW (hp)

Max. Allowable Back

Exhaust Gas Temperature: C (F)

Consult your Olympian representative for more information

Alternator Performance Data

Reactances shown are applicable to standby ratings.

Alternator Technical Data

Voltage Regulation (steady state) (%):

Wave Form NEMA = TIF:

Wave Form IEC = THF:

Total Harmonic Content LL/LN:

Winding Pitch - Code:

Supression is in line with European

Radiant Heat: kW (Btu/min)

Consult your Olympian representative for more information

1 Phase Ratings and Performance at 50 Hz, 1500 RPM

1 Phase Ratings and Performance at 60 Hz, 1800 RPM

Weights & Dimensions

Net (+ lube oil)