Scribd
Upload
80 views

Series 5400 Humidity/Temperature Operating Systems: °F (0-55°C) - Use With ETS or Other Controllers and

This document provides specifications for ETS Series 5400 humidity and temperature operating systems. The systems can independently control humidity from <2% to >98% RH and temperature from <32°F to 135°F in chambers up to 60 cubic feet. The systems use various technologies like desiccant dehumidifiers, ultrasonic humidifiers, thermoelectric coolers, refrigeration, and electric heaters to control humidity and temperature. Specifications are provided for the different components, including dehumidifiers, humidifiers, coolers, and heaters.

Uploaded by

sundariudhayakumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
80 views

Series 5400 Humidity/Temperature Operating Systems: °F (0-55°C) - Use With ETS or Other Controllers and

This document provides specifications for ETS Series 5400 humidity and temperature operating systems. The systems can independently control humidity from <2% to >98% RH and temperature from <32°F to 135°F in chambers up to 60 cubic feet. The systems use various technologies like desiccant dehumidifiers, ultrasonic humidifiers, thermoelectric coolers, refrigeration, and electric heaters to control humidity and temperature. Specifications are provided for the different components, including dehumidifiers, humidifiers, coolers, and heaters.

Uploaded by

sundariudhayakumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

HUMIDITY/TEMPERATURE

OPERATING SYSTEMS

Series 5400

Dehumidify, humidify, heat and cool bench-top and floor


standing chambers, dry boxes, glove boxes and desiccator
cabinets with volumes up to 60 cu. ft. Configured to meet most
humidity and temperature applications requiring independent
control of humidity from <2 to >98% RH and temperature from
<32 to 135F (0-55C). Use with ETS or other controllers and
chambers for testing, weighing, calibration, assembly, storage
and R&D.
Features:
1 Dehumidifiers
Renewable, indicating desiccant
Self-regenerating
Dry gas
1 Ultrasonic humidifiers
1 Cooling
Thermoelectric
Refrigeration
Liquid-to-gas conversion

Humidity

1 Electric Heaters
1 Use with new chambers or
retrofit existing chambers
1 Custom systems available

Temperature

Description:
All ETS Operating Systems require 115 or 230 VAC, 50/60 Hz power. Voltage requirements
must be specified at time of order.
Dehumidifiers: Available in closed and open loop
configurations. Closed loop systems use
desiccant/pump technology with a pump drawing
air from the enclosure, passing it through a drying
column containing indicating calcium sulfate
(CaSO4) then returning dry air to the chamber.
The process is repeated until the desired humidity
level is achieved.
Model 5461

Model 5471

Open loop systems use dry gas or dry


air to purge an enclosure containing
higher humidity air. A valve controls the
flow of dry nitrogen (Ni) or other dry
gas. A dual column self-regenerative
molecular sieve desiccant dryer dries
house air used to purge the chamber.
Model 5465

Model 5478

Desiccant based systems reduce humidity in properly sealed chambers to approximately


10% RH. Dry gas systems can maintain less than 1% RH.
Humidifiers: Ultrasonic humidifiers provide a quick and efficient means to achieve high
humidify levels, even at elevated temperatures. Open and closed loop systems use distilled
or deionized tap water, single or multiple transducers plus self-contained fans, pumps or
house air to drive humidity levels to 100% below 86F (30C) in moderate size enclosures.

Model 5462

Model 5472

Model 5472-3 (3-Head)

Cooling: Cooling systems utilizing thermoelectric, refrigeration and liquid-to-gas conversion


technologies provide precise temperature stability or rapid temperature reduction in properly
configured test chambers. The actual temperature reduction achieved is a function of many
factors including ambient temperature, chamber size, insulation, heat load and humidity. The
Cooling Requirements Table (see specifications) provides an estimate of the correct size
cooling system required for various non-insulated acrylic chamber surface areas without heat
load.
Thermoelectric units are available in single or multiple configurations to increase cooling
capacity up to 400 Watts (1150 BTUs). When used in conjunction with controlled heating,
temperature stability better than 1F/C in non-insulated acrylic enclosures can be achieved.
A 700 Watt (2000 BTU) refrigerator using environmentally friendly R134 refrigerant is the
highest capacity cooler currently available. Evaporator temperatures kept above 32F (0C),
enhancing temperature stability in non-insulated enclosures greater than 20 cu. ft.
Liquid CO2-to-Gas conversion is a cost-effective system that cools through the rapid
expansion of a liquid to gas as it passes through a small orifice, creating gas temperatures
below -100F (-73C). It provides the fastest cooling of the three cooling technologies. Liquid
nitrogen may also be used, but requires a cryogenic valve and hose assembly and is typically
used in conjunction with nitrogen drying systems.

Model 5473-150 Thermoelectric

Model 5463 Gas Cooling

Gas cooling is not recommended for high humidity applications since the cold gas will dry the
environment and may overwhelm the capacity of the humidifier.
Heaters: Electric heaters are supplied as single units or cascaded to achieve heating
capacities from 125 to 1000 Watts. Integrated heating systems include circulating fans,
overload protection, power on indication plus auxiliary weather-tight North American AC
outlets housed in aluminum or stainless steel enclosures.

Model 5474

Model 5474L

Specifications:
Dehumidifiers:
Model 5461: Closed loop, Desiccant/Pump
Drying medium: Renewable, indicating CaSO4
Capacity: 1 lb (.45kg)
Outlet Dew Pt.: -100F @ 100F Sat. air in
Pump/ Output flow rate: Reciprcating/0.21 SCFM
Dimensions: Approx. 12x12x12 (30x30x30cm)
Weight: 3.25 lbs (1.5kg)

Model 5471: Closed Loop, Desiccant/Pump


Drying medium: Renewable, indicating, CaSO4
Capacity: 2.5 lb (1.2kg)
Outlet Dew Pt.: -100F @ 100F Sat. air in
Pump/Outlet flow rate: Diaphragm/0.71 SCFM
Dimensions: 6.5Wx9.5Dx16H (6.5x24x40.6cm)
Weight: 7 lbs (3.2kg)

Model 5465: Open Loop, Dry Gas


Drying medium: Nitrogen, CO2, Dry Air, etc.
Capacity: Determined by source (tank or gas generator)
Control: Solenoid Valve with pressure regulator
Output flow rate: Adjustable 0.2 2.0 SCFM
Weight: 2 lbs (0.9kg)

Model 5478: Self-Regenerating Desiccant


Drying medium: #5A Molecular sieve
Source/Capacity: Continuous, air @ 50-100psi
Outlet Dew Pt.: -40F DP @ 90F Sat. air in
Output flow rate: 0.26 SCFM @ 50 psig
Dimensions: 6.5Wx9.5Dx4.5H (16.5x24x11.5cm)
Weight: 7 lbs (3.2kg)

Humidifiers:
Model 5462: Open Loop, Single-Head Ultrasonic
Air source: Fan, 1.0 (25mm) ID tube
Water: Distilled or deionized
Capacity: 0.5 Gal (1.9 l)
Max RH: 100% @ 72F (22C)
Dimensions: 11Wx6Dx9H (28x15x23cm)
Weight: 3 lbs (1.4kg)
Output: < 0.5 cfm

Model 5472: Open Loop, Single-Head Ultrasonic


Air source: Pump, 1.0 ID tube
Water: Deionized from included deionizer column
Capacity: 5.0 Gal (19 l) tank or deionized tap water
Max RH: 100% @ 72F (22C)
Dimensions: 6.5Wx9.5Dx6.5H (16.5x24x16.5cm)
Weight: 7 lbs (3.2kg)
Options: 3-Head transducer, house air & closed loop
Output: 1-Hd 0.71cfm; 3-Hd 0.71cfm

Coolers:
Model 5473 Thermoelectric
Model 5475 Refrigeration
Cooling capacity: 100, 150, 200, 300 & 400 Watts
Cooling capacity: 700 Watts
Cooling requirements: Refer to Table below
Cooling requirements: Refer to Table below
Power Req.:6A@115/3.5A@230VAC per 200W cooling Power Req.: 8A
Model 5463 Liquid CO2
Model 5466 Liquid Nitrogen
Source: Liquid CO2 tank with dip tube (user supplied)
Source: Liquid Ni Tank, 50psi min (user supplied)
Cooling: To 25F (-4C) in 13 ft3 acrylic chamber
Cooling: To 25F (-4C) in 13 ft3 acrylic chamber
Control: Solenoid valve with pressure regulator
Control: Cryogenic hose & solenoid valve
Cooling requirement Table for non-insulated acrylic chambers
Area (in2)
T - C
5
10
15
20
2000
60
125
200
275
3000
80
175
275
400
4000
100
225
375
500
5000
125
275
450
650
6000
150
325
525
750
7000
175
375
625
900
8000
200
425
700
1000

Heaters:
Model 5474
Capacity: 2x250 Watt Electric strip
Housing: Stainless steel, 16x13x3.125 (41x33x8cm)
Fans: 1x110 cfm
Thermal Protection: 135F (55C)
Aux AC Outlet: Dual North American GFI

Model 5474-L
Capacity: 2x250 Watt Electric strip
Housing: Aluminum, 24x14x4 (60x36x10cm)
Fans: 2x110 cfm
Thermal Protection: 135F (55C)
Aux AC Outlet: Dual North American GFI

Warranty: One (1) Year


Specifications subject to change without notice.

12/07

You might also like