T Marc254 DsUS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

T-Marc 250 Series

Ethernet and Circuit Emulation Service Demarcation Solution


Managed multi-service
demarcation integration for
converged services

T-Marc 250 with Gigabit Ethernet uplink

Service synchronization over Layer


2 Ethernet, IEEE-1588v2 - T-Marc254H only
Label Distribution Protocol (LDP) T-Marc 254H only

Certied Compliant

T-Marc 254 and 254H with Gigabit Ethernet uplink and CES

elco Systems T-Marc 250 is a family of costeffective, fully-managed Carrier Ethernet


demarcation devices that provide service termination
and demarcation over service providers packetbased networks. As a multi-port customer-located
intelligent demarcation device, the T-Marc delivers
managed converged services (voice, video and data)
over virtual Ethernet in a metro Ethernet network.
Advanced Layer 2 Networking using Telco Systems
AccessEthernet allows total flexibility in deployment
and delivery of Ethernet services. Physical and logical
channel networking capabilities provide bandwidth
profiles, advanced traffic classes, and complete
control over how subscriber traffic is transported and
managed across a service providers network.
Circuit Emulation Services over Packet
The T-Marc 254 utilizes AccessTDM to deliver legacy
TDM over Ethernet enabling service providers to
extend their reach and addressable customer base
to include both voice and data without sacrificing
revenues from existing TDM services. The T-Marc
254H has been optimized for wireless backhaul
applications with standards-based synchronization and
is temperature-hardened for outdoor installations.
Based on Circuit Emulation Services over Packet (CESoP)
standards for T-Line (T1/E1) services, the T-Marc
protects users legacy equipment investments PBXs,
routers with T1/E1 interfaces while cost effectively
enabling Ethernet service providers the ability to offer
revenue generating services over dedicated, managed
next generation packet networks.

Advanced Networking Features


The T-Marc offers a rich management toolset for
multi-vendor interoperability in element, network and
service management to reduce operational expenses
(OPEX) and scale management to large access
networks.
By augmenting existing IP/SNMP-based management
frameworks with IEEE/ITU-T OAM protocols and MEF
frameworks, the T-Marc family provides proactive
health and status updates on network topology and
application behavior.
The T-Marc supports standards-based management
to enable service provers to use any off-the-shelf
management system to manage a T-Marc device
as an independent network element with its own IP
address.
Telco Systems BiNOSCenter management system
provides both standards-based and extended
standards-based management.
To reduce operational expenses and scale management
to large access networks, existing standards-based
SNMP management is coupled with a secure IP-based
proxy management solution to provide proactive
health and status information on individual links and
connections.
Enhanced troubleshooting tools include optical
power monitoring, quality of equipment monitoring,
and quality of line monitoring to enable fast fault
identification that minimizes the need for expensive
truck rolls.

Flexible architecture supporting


- 4 x 10/100Base-T ports
- 1 Combo 10/100/1000Base-T or
100Base-FX/1000Base-X port
- 1 x 1000Base-X uplink
- 4 T1/E1s CES ports (T-Marc 254)

Extensive Layer 2 functionality with


non-blocking wire-speed switching
capabilities
Comprehensive OAM and
management options
Standards-based proxy
management
Control, monitoring, line testing
and loopback capabilities
T1/E1 CES support for 2G/3G
cellular backhaul and leased-line
replacement
Redundant uplinks for protected
services and link aggregation
Enhanced security and
protection mechanisms
Granular rate limiting for ingress and
egress
MEF and IEEE standards compliance
for multi-vendor interoperability
Certified to MEF 9 and MEF 14 for
Ethernet Services at the UNI
MEF 18 compliant
Compact 1RU design with desktop,
rack, and wall-mounting options
Temperature-hardened T-Marc 254H only

T-Marc 250 Series

Key Applications

CES and Ethernet-based services over Metro Ethernet

Wire-speed copper and fiber Ethernet-based


demarcation between service provider and
enterprise networks

End-to-End Service Assurance

PABX

T-Marc

Ethernet
Nx10/100/1000

T-Metro

Carrier Ethernet
Access

IP/MPLS
Network

Service
Router

Carrier Ethernet
Access

High-performance Private LAN, Private Line,


Ethernet VPN and TLS

Ethernet
Nx10/100/1000

T-Metro

FTTx

GigE

T1

T1/E1 CES for TDM leased-line replacement

T-Marc

PSTN
GigE

PBX-to-PSTN backhaul and PBX-to-PBX (tieline) connectivity

T-Metro

T-Marc

GSM/CDMA BTS and UMTS cellular backhaul

T1
BTS/NodeB

Specifications

Layer 2 Features

Standards and Certifications

Layer-2 performance: 2.9762 Mpps


IEEE 802.1D and IEEE 802.1Q Bridging
Transparent LAN Service (TLS): Q-in-Q-based
4095 system-wide VLAN space
8K MAC address forwarding table
Port-based VLANs and Super VLANs
Layer Two Control Protocol (L2CP) Tunneling
Per-port, flexible MAC-based loopbacks (MAC swap)
Response Time Reporter (RTR)

MEF 9: EPL, EVPL, ELAN


MEF 14: EPL
MEF 8: SAToP, CESoPSN
IETF-PWE3, SAToP, CESoPSN
IEEE 1588v2 (T-Marc 254H only)
IEEE 802.1D; IEEE 802.1Q; IEEE 802.1P
IEEE 802.1p Priority Queuing; IEEE 802.1u-2001
IEEE 802.3x PAUSE: flow control and back pressure
IEEE 802.1x; IEEE 802.3ad
IEEE 802.3; 802.3u; 802.3z Ethernet
IEEE 802.3ah OAM; IEEE 802.1ag CFM
G.823/G.824 synchronization
2G/3G cellular applications compliant
NEBS Level 3 compliant

Interfaces
Flexible Ethernet combo-port interfaces
Dual-speed (100M and 1000M) fiber interfaces
T1/E1 interfaces (T-Marc 254 only)
Pluggable optics, including CWDM
Tri-speed (10/100/1000M) copper interfaces
Baby Giant frames up to 1632 bytes
ASCII/DB9 management port

Traffic Management Features

MEF networking features


Ethernet Service Definition, Phase 2
E-Line (EPL and EVPL) and E-LAN (ELAN) services
CE traffic bundling option: all-to-one
Point-to-point topologies
1 EVC per subscriber/access port
Per-UNI (per-port) single-rate, two-color marker
ingress bandwidth profiles (policing) with programmable burst capability
UNI Type 1

Circuit Emulation Service Features


(T-Marc 254 only)

Security Features
Secure management protocols: SNMPv3, SSHv2
Management VLANs
RADIUS, TACACS+ and IEEE 802.1X authentication

T1/E1 frame transport using Pseudowire (PWE3)


encapsulation over Ethernet, IP, and Martini VLLsLink
aggregation groups
Multiple timing modes: Internal, line, external and
adaptive
Optional 3G cellular-grade clock recovery
Synchronous clock distribution
Line error and alarm detection, propagation,reporting

Ordering Information

Four system-wide traffic classes with flexible hybrid


scheduling. Classification by:
Ingress interface, or port
Source and/or destination MAC address
IEEE 802.1ad priority code points (PCP)
IPv4 TOS/DSCP field

Protection Features

General Line Protection


Spanning Tree: STP, RSTP, MSTP

Management and OAM Features


Element management systems
NetBeacon ESP
BiNOSCenter NG / Proxy-based management
Multiple management access protocols and tools
SNMPv1/v2c/v3; Telnet, SSHv2, TFTP, CLI
DHCP (client)
Syslog
Direct IP-based management mode
Connectivity fault management, performance and
services management: IEEE.1ag
RMON Group 1, 3, 4, and 10

Regulatory Compliance
North America and Canada
EMI - FCC Part 15 Class B
Safety - UL1950, cUL 60950 CSA 22.2 No. 950
International
EMI - EN55022 Class B
Immunity - EN50082-1
Safety - EN 60950

Physical Specifications

Note: 'z' specifies power supply and cord types: NA for North America, EUR: for Europe, UK: for United Kingdom, DC for DC power supply

TMC-250P-z*

Managed Ethernet demarcation gateway : (4) 10/100BaseT ports; (1) unpopulated


SFP-based 1000BaseSX port; (1) universal 100/1000BaseX unpopulated SFP-based or
10/100/1000BaseT port; (1) external power supply

Dimensions: 1.73H x 8.7W x 5.51D



44mm x 221mm x 140.5mm
Weight:
2.42 lbs (0.6 kg)
Power:
5VDC @3A (max) with external power adaptor
(AC to DC, DC to DC)

TMC-254P-z*

Managed Ethernet demarcation gateway: (4) 10/100BaseT ports; (1) unpopulated


SFP-based 1000BaseSX port; (1) universal 100/1000BaseX unpopulated SFP-based or
10/100/1000BaseT port; (4) integrated T1/E1CES (RJ-45 balanced*, distance 200m); (1)
external power supply
TMC-254 with high performance clock recovery (OCXO)

Environmental Specifications

Part Number

TMC-254PHPCR-z*
TMC-254H-z*

Description

Same as TMC-254P-HPCR including


-
Temperature Hardened
-
LDP
-
IEEE-1588v2 Synchronization over Ethernet

Relative humidity:
0% to 95% non-condensing
Storage temperature:
-25C to 80C (-13F to 176F)
Operating temperature 0C to 40C (32F to 104F)
Short term extended temperature:

-20C to 60C (-4F to 140F)
T-Marc 254H only:
Storage temperature:
-40 C to 80 C (-40 F to 176 F)
Operating temperature -40C to 70C (-40F to 158F).

*Unpopulated SFP ports. For full list of optical and PDH modules, please visit us at www.telco.com, contact our sales department,
any of our branches or authorized distributors.

Int'l Headquarters

US Headquarters

Germany

France

Asia Pacific

Japan

Tel: +972-9-866-2525
Fax: +972-9-866-2500
[email protected]
http://w w w.telco.com

Tel: +1-800-221-2849
Fax: +1-781-551-0538
[email protected]
http://w w w.telco.com

Tel: +49-241-4635490
Fax: +49-241-4635491
i [email protected]
http://w w w.telco.com

Tel: +33 (0) 1 -56 7-1 2-7 73


Fax: +33 (0) 1- 43 7-7 1-7 80
[email protected]
http : / / w w w. b atm .f r

Tel: +65-6224-3112
Fax: +65-6220-5848
i n fo.a p a c @ te l co.co m
http://w w w.telco.com

Tel: +81(3)5215-5709
Fax: +81(3)5215-5704
Info.j [email protected]
http://w w w.telco.com

2010 Telco Systems a BATM Company. All rights reserved. All trademarks are property of their respective owners. Specifications are subject to change without notice. PN:TMarc250US Mar10

You might also like