Thinner Plasite 19

Date Printed: 4/24/2013
Page 1 / 5
Material Safety
Data Sheet
CHEMTREC Transportation Emergency Phone:

800-424-9300
Pittsburgh Poison Control Center Health
Emergency No.: 412-681-6669
NOTE: The CHEMTREC Transportation Emergency
Phone is to be used only in the event of chemical
emergencies involving a spill, leak, fire, exposure, or
accident involving chemicals
1. Identification
Product Name:
URETHANE CONVERTER 811
Revision Date:
4/24/2013
Identification Number:
0856B1NL
Supercedes Date:
3/28/2011
Product Use/Class:
Catalyst for Polyurethane Products - FOR INDUSTRIAL USE ONLY
Manufacturer:
Carboline Company
2150 Schuetz Road
St. Louis, MO 63146
800-848-4645
Preparer:
Regulatory Department
2. Hazard Identification
EMERGENCY OVERVIEW: Harmful if inhaled. Violent chemical reaction; water reactive Keep away from oxidising agents,
strongly acid or alkaline materials, as well as of amines, alcohols and water. Causes eye, skin, and respiratory tract irritation. May
cause sensitization of susceptible persons. Combustible liquid and vapour. Keep away from heat and sources of ignition. Use with
adequate ventilation. May be harmful if swallowed.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: May cause eye irritation.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May cause allergic skin reaction. May cause skin irritation.
EFFECTS OF OVEREXPOSURE - INHALATION: Vapours may be irritating to eyes, nose, throat, and lungs. May cause allergic
respiratory reaction. Harmful if inhaled. Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting.
Liver and kidney injuries may occur.
EFFECTS OF OVEREXPOSURE - INGESTION: Harmful if swallowed.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Repeated and prolonged exposure to solvents may cause brain and
nervous system damage. Prolonged exposure can be harmful for certain organs, e.g. liver, kidneys, blood, nervous system and
skin.
MEDICAL CONDITIONS PRONE TO AGGRAVATION: Persons allergic to isocyanates, and particularly those suffering from
asthma or other respiratory conditions, should not work with isocyanates.
PRIMARY ROUTE(S) OF ENTRY: Eye Contact, Ingestion, Skin Absorption, Skin Contact
3. Composition/Information On Ingredients
Hazardous Ingredients
Chemical Name
CAS-No.
HOMOPOLYMER OF HDI
N-BUTYL ACETATE
AROMATIC HYDROCARBON
HEXAMETHYLENE
DIISOCYANATE
28182-81-2
123-86-4
64742-95-6
822-06-0
Weight %
Less Than
ACGIH TLVTWA
90.0 N/E
5.0 150 PPM
5.0 N/E
1.0 0.005 PPM
ACGIH TLVSTEL
OSHA PEL-TWA
OSHA PELCEILING
N/E
200 PPM
N/E
N/E
710 MG/M3
N/E
N/E
N/E
N/E
N/E
N/E
N/E
Page 2 / 5
4. First-aid Measures
AFTER EYE CONTACT: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
AFTER SKIN CONTACT: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing
contaminated clothing and shoes. If skin irritation persists, call a physician.
AFTER INHALATION: Give oxygen or artificial respiration if needed. Remove person to fresh air. If signs/symptoms continue, get
medical attention.
AFTER INGESTION: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. If swallowed, call a
poison control centre or doctor immediately.
5. Fire-fighting Measures
Flash Point, F:
(Setaflash)
127F (53C)
Extinguishing Media:
Carbon Dioxide, Dry Chemical, Foam
Lower Explosive Limit, %:
0.9
Upper Explosive Limit, %:
7.6
UNUSUAL FIRE AND EXPLOSION HAZARDS: Combustible Liquid Provide adequate ventilation. Keep away from
heat/sparks/open flames/hot surfaces. - No smoking.
SPECIAL FIREFIGHTING PROCEDURES: Combustible material Cool containers / tanks with water spray. In the event of fire,
wear self-contained breathing apparatus.
6. Accidental Release Measures

PERSONAL SAFETY MEASURES/ENVIRONMENTAL MEASURES/METHOD OF CLEANING/CONTAINMENT: Remove all
sources of ignition. To avoid ignition of vapours by static electricity discharge, all metal parts of the equipment must be grounded.
Evacuate personnel to safe areas. Wear personal protective equipment. For personal protection see section 8. Contain spillage,
soak up with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a container for
disposal according to local / national regulations (see section 13). Do not allow material to contaminate ground water system.
Prevent product from entering drains.
7. Handling and Storage

INSTRUCTIONS FOR SAFE HANDLING : Do not breathe vapours or spray mist. Do not get in eyes, on skin, or on clothing. Keep
containers dry and tightly closed to avoid moisture absorption and contamination. Use only with adequate ventilation/personal
protection. Wash thoroughly after handling. Ensure all equipment is electrically grounded before beginning transfer operations. Do
not use sparking tools. Prepare the working solution as given on the label(s) and/or the user instructions.
STORAGE CONDITIONS: Keep container closed when not in use. Store in a dry, well ventilated place away from sources of heat,
ignition and direct sunlight.
8. Exposure Controls/Personal Protection

ENGINEERING CONTROLS: Avoid contact with skin, eyes and clothing. Ensure adequate ventilation, especially in confined
areas.
RESPIRATORY PROTECTION: In order to avoid inhalation of spray-mist and sanding dust, all spraying and sanding must be done
wearing adequate respirator. Use only with ventilation to keep levels below exposure guidelines reported in this document. User
should test and monitor exposure levels to ensure all personnel are below guidelines. If not sure, or not able to monitor, use State or
federally approved supplied air respirator. For silica containing coatings in a liquid state, and/or if no exposure limits are established
above, air-supplied respirators are generally not required.
SKIN PROTECTION: Lightweight protective clothing Impervious gloves Gloves should be discarded and replaced if there is any
indication of degradation or chemical breakthrough. Request information on glove permeation properties from the glove supplier.
Page 3 / 5
EYE PROTECTION: Safety glasses with side-shields

OTHER PROTECTIVE EQUIPMENT: Ensure that eyewash stations and safety showers are close to the workstation location.
PROTECTION AND HYGIENE MEASURES : Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and at the end of workday. When using, do not eat, drink or smoke.
9. Physical and Chemical Properties

Boiling Range:
262 F (128 C) - 262F (128C)
Vapor Density:
Heavier than Air
Odor:
Slight Odor
Odor Threshold:
N/D
Appearance:
Colorless, Mobil Liquid
Evaporation Rate:
Slower Than Ether
Solubility in Water:
Reacts
Specific Gravity:
1.12
Freeze Point:
N/D
pH:
N/D
Physical State:
Liquid
Vapor Pressure:
No Information
(See section 16 for abbreviation legend)
10. Stability and Reactivity

CONDITIONS TO AVOID: Heat, flames and sparks.
MATERIALS TO AVOID: Strong oxidizing agents
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen (NOx), dense
black smoke.
HAZARDOUS POLYMERIZATION: Hazardous polymerisation does not occur.
STABILITY: Stable under normal conditions.
11. Toxicological Information

Chemical Name
CAS-No.
LD50
LC50
HOMOPOLYMER OF HDI
28182-81-2
5000 mg/kg, oral, rat
390 mg/m3, inhalation, rat
N-BUTYL ACETATE
123-86-4
10760 mg/kg, rat, oral
23.4 mg/l/4/h (rat)
AROMATIC HYDROCARBON
64742-95-6
4700 mg/kg, oral, rat
3670 ppm/8 hours, rat, inhalation
HEXAMETHYLENE DIISOCYANATE
822-06-0
710 mg/kg, oral rat
23 ppm / 4 hrs
12. Ecological Information

ECOLOGICAL INFORMATION: No information available.
13. Disposal Information

DISPOSAL INFORMATION: Dispose of in accordance with local regulations.
Page 4 / 5
14. Transport Information

DOT Proper Shipping Name:
Paint
Packing Group:
III
DOT Technical Name:
N/A
Hazard Subclass:
N/A
DOT Hazard Class:
Resp. Guide Page:
128
DOT UN/NA Number:
UN 1263
Additional Notes:
No Information
15. Regulatory Information

U.S. Federal Regulations:
CERCLA - SARA Hazard Category
This product has been reviewed according to the EPA Hazard Categories promulgated under Sections 311 and 312 of the
Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to
meet the following categories:
Fire Hazard, Acute Health Hazard
Sara Section 313:

This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Chemical Name
CAS-No.
HEXAMETHYLENE DIISOCYANATE
822-06-0
Toxic Substances Control Act:

This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported
from the United States:
No TSCA 12(b) components exist in this product.
U.S. State Regulations:

New Jersey Right-to-Know:
The following materials are non-hazardous, but are among the top five components in this product.
No NJ Right-To-Know components exist in this product.
Pennsylvania Right-To-Know:
The following non-hazardous ingredients are present in the product at greater than 3%.
No PA Right-To-Know components exist in this product.
CALIFORNIA PROPOSITION 65:

Warning: The following ingredients present in the product are known to the state of California to cause Cancer:
Chemical Name
CAS-No.
ETHYL BENZENE
CUMENE
100-41-4
98-82-8
Warning: The following ingredients present in the product are known to the state of California to cause birth defects, or other
reproductive hazards.
Chemical Name
CAS-No.
TOLUENE
108-88-3
Page 5 / 5
International Regulations:
CANADIAN WHMIS:
This MSDS has been prepared in compliance with Controlled Product Regulations except for the use of the 16 headings.
Canadian WHMIS Class:
B3 D2A D2B
16. Other Information

HMIS Ratings:
Health:
Flammability:
Reactivity:
Personal Protection:
VOLATILE ORGANIC COMPOUNDS, GR/LTR MIXED (UNTHINNED): Refer to Part A MSDS

Legend: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
The information contained herein is, to the best of our knowledge and belief accurate. However, since the conditions of handling
and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this
material. It is the responsibility of the user to comply with all applicable federal, state, and local laws and regulations.

Thinner Plasite 19

Uploaded by

Copyright:

Available Formats

Thinner Plasite 19

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Thinner Plasite 19

Uploaded by

Copyright:

Available Formats

Date Printed: 4/24/2013

CHEMTREC Transportation Emergency Phone:

URETHANE CONVERTER 811

Catalyst for Polyurethane Products - FOR INDUSTRIAL USE ONLY

Date Printed: 4/24/2013

Carbon Dioxide, Dry Chemical, Foam

Lower Explosive Limit, %:

Upper Explosive Limit, %:

6. Accidental Release Measures

7. Handling and Storage

8. Exposure Controls/Personal Protection

Date Printed: 4/24/2013

EYE PROTECTION: Safety glasses with side-shields

9. Physical and Chemical Properties

262 F (128 C) - 262F (128C)

Heavier than Air

Colorless, Mobil Liquid

Slower Than Ether

(See section 16 for abbreviation legend)

10. Stability and Reactivity

11. Toxicological Information

5000 mg/kg, oral, rat

390 mg/m3, inhalation, rat

10760 mg/kg, rat, oral

23.4 mg/l/4/h (rat)

4700 mg/kg, oral, rat

3670 ppm/8 hours, rat, inhalation

710 mg/kg, oral rat

12. Ecological Information

13. Disposal Information

Date Printed: 4/24/2013

14. Transport Information

DOT Technical Name:

DOT Hazard Class:

Resp. Guide Page:

DOT UN/NA Number:

15. Regulatory Information

Sara Section 313:

Toxic Substances Control Act:

No TSCA 12(b) components exist in this product.

U.S. State Regulations:

CALIFORNIA PROPOSITION 65:

Date Printed: 4/24/2013

Canadian WHMIS Class:

16. Other Information

VOLATILE ORGANIC COMPOUNDS, GR/LTR MIXED (UNTHINNED): Refer to Part A MSDS

You might also like