Scribd
Upload
468 views3 pages

BDD1 Assignment

The document provides instructions for four drawing sheets to design and plan residential buildings. Sheet 1 involves designing a ground plus first floor RCC structure with various rooms and facilities. Dimensions and assumptions for structural elements are provided. Sheet 2 involves designing a ground plus first floor load-bearing structure with pitched roof and various rooms. Sheet 3 requires drawing roof and foundation plans and sections for the Sheet 1 structure. Sheet 4 requires drawing door and window details. Assignment questions involve explaining principles of residential planning, building bye-laws, and structural terms, and designing a staircase.

Uploaded by

Priya Thuwal Bhat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
468 views3 pages

BDD1 Assignment

The document provides instructions for four drawing sheets to design and plan residential buildings. Sheet 1 involves designing a ground plus first floor RCC structure with various rooms and facilities. Dimensions and assumptions for structural elements are provided. Sheet 2 involves designing a ground plus first floor load-bearing structure with pitched roof and various rooms. Sheet 3 requires drawing roof and foundation plans and sections for the Sheet 1 structure. Sheet 4 requires drawing door and window details. Assignment questions involve explaining principles of residential planning, building bye-laws, and structural terms, and designing a staircase.

Uploaded by

Priya Thuwal Bhat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Building Design and Drawing - 1

ASSIGNMENTS AND DRAWING SHEETS


BUILDING DESIGN AND DRAWING - 1
DRAWING SHEET NO.1:
Plan and design the RCC framed structure having ground plus first floor for the plot of size
(40 x 35)m. Following details drawn to scale as per standard practice : site plan, ground floor plan, first
floor plan, elevation, section along longitudinal direction passing through stair and sanitary details,
door and window schedule as per following requirements,
1) It is proposed to Plan, Design and draw a residential bungalow for a contractor as (G+1) RCC
framed structure with all the following facilities:Living room
= 25 m2.
Drawing room
= 22 m2.
Master bed room (with AT) = 22 m2.
Kitchen
= 14 m2.
Dining room
= 16 m2.
Bed room
= 16 m2.
Guest room
= 15 m2.
Pooja room
= 12 m2.
Provide Toilet, Passages etc. as per the Building Bye-Laws and Regulations. Assume Floor
Floor height as 3.3m.
Draw the following according to some suitable scale (1:100):(a) Ground floor plan.
(b) First floor plan.
(NOTE: (1) In the above problem if they dont mention frame structure we can provide Load bearing
structure with foundation.
(2) Hence given RCC framed structure provide footing with assumed dimensions.
(3) Assume Height of plinth = 0.6m(Provide Earth filling = 0.3m, Rubble soling = 0.15, Bed
concrete = 0.1 m, floor finish = 0.05m), thickness of slab RCC = 0.15m, Height of parapet = 0.8m
and thickness = 0.15 m, Sill height = 0.9 m, Internal wall thickness = 0.15 m, External wall
thickness = 0.23 m, Chajja projection = 0.45 m, Thickness of lime water proofing over RCC slab =
0.1 m, Thickness of lintel = 0.1 m, Door D1=(1000x2100)mm; D2=(800x2100)mm, Window
W1=(2000x1200)mm; W2=(1500x1200)mm, Ventilator V = (800x1000)mm.

DRAWING SHEET NO.2:


Prepared by: Mr.Sandeep Gujjar, Asst.Professor, Dept. of Civil Engg., PHCET,
Rasayani.
Page 1

Building Design and Drawing - 1


Plan and design the Load bearing structure having ground plus first floor with pitched roof.
Following details drawn to scale as per standard practice : site plan, ground floor plan, first floor plan,
elevation, section showing maximum details, door and window schedule as per following
requirements,
1) A residential building in a plot of size 20m x 25m the main road abutting 20m wide is on the East side
of plot the following accommodation is to be provided:(a) Living room.
(b) Bed room (2 nos. (RCC) with attached bath and 1 no. (pitched roof) with attach
bath).
(c) Kitchen cum dining room.
(d) Office for the consultant.
Provide adequate passage, verandah, stair and sanitary units. Draw ground floor and first floor plan.
(NOTE: Assume Height of plinth = 0.6m(Provide Earth filling = 0.3m, Rubble soling = 0.15, Bed
concrete = 0.1 m, floor finish = 0.05m), Depth and width of foundation = 0.9m, Thickness of slab
RCC = 0.15m, Height of parapet = 0.8m and thickness = 0.15 m, Sill height = 0.9 m, Internal wall
thickness = 0.15 m, External wall thickness = 0.23 m, Chajja projection = 0.45 m, Thickness of
lime water proofing over RCC slab = 0.1 m, Thickness of lintel = 0.1 m, Door
D1=(1000x2100)mm; D2=(800x2100)mm, Window W1=(2000x1200)mm; W2=(1500x1200)mm,
Ventilator V = (800x1000)mm.

DRAWING SHEET NO.3:


For the RCC framed structure given above (for sheet no.1 & no.2) draw to scale as per standard
practice:
1) roof plan (for sheet no.1 RCC considering any room provided)and its section,
2) foundation plan and its section(for sheet no.2),
3) stair and its section(for sheet no.1).

DRAWING SHEET NO.4:


For the RCC framed structure given above (for sheet no.1) draw to scale as per standard practice:
1) Typical door and its section(Fully paneled door),
2) Window details and its section(Fully paneled window).

Assignment No.1
Prepared by: Mr.Sandeep Gujjar, Asst.Professor, Dept. of Civil Engg., PHCET,
Rasayani.
Page 2

Building Design and Drawing - 1


1) Explain with sketches principles of planning with reference to residential building. (20 marks,
Dec 2011; 10 marks, June 2011, Dec 2010, Dec 2008).
2) Write detailed notes on Building Bye-Laws and Regulations to be used for residential buildings.
(10 marks, Dec 2008).
3) Explain the zoning regulation. What are the necessities of building bye-laws? (10 marks, Dec
2010).
4) Explain the following terms :- (10 marks, Dec 2010)
(1) Plinth area.
(2) FSI (Floor Space Index) or FAR (Floor Area Ratio).
(3) Carpet area.
(4) Working drawing.
(5) Built up area.
(6) Building line.
5) Explain Sun Path Diagram with neat sketch. (10 marks, Dec 2008; 10 marks, June 2011).
6) Write detailed note on Wind rose diagram. (10 marks, June 2011)
7) Design the dog legged staircase for the building you have proposed in sheet no.1.
8) Write the Classification of buildings according to NBC-2005.
Reference books : 1)Building Drawing by MG Shah and CM Kale.
2) Civil Engineering Drawing by M.Chakraborti).
3) Planning and Designing of residential building by Y.N.Raja Rao.
4) Building construction by Rangwala.

Prepared by: Mr.Sandeep Gujjar, Asst.Professor, Dept. of Civil Engg., PHCET,


Rasayani.
Page 3

You might also like