Scribd Logo
Upload

Welcome to Scribd!

  • 92 views

    Energypack Thermic Fluid Heater

    Uploaded by

    utechprojects
    This document provides information about thermic fluid heaters. It describes the key components of the heaters including coils for circulating thermic fluid that provide three passes of heating, insulation, automatic burners and controls. It lists models varying in heat output from 50,000 to 20,000,000 KCAL/HR and corresponding fuel consumption rates. The document highlights features such as heavy-duty construction, ability to use waste fuels, fully automatic controls, and air pre-heating for high efficiency. It also lists related boiler and heat exchange products from the manufacturer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Energypack Thermic Fluid Heater

    Uploaded by

    utechprojects
    92 views4 pages
    This document provides information about thermic fluid heaters. It describes the key components of the heaters including coils for circulating thermic fluid that provide three passes of heating, insulation, automatic burners and controls. It lists models varying in heat output from 50,000 to 20,000,000 KCAL/HR and corresponding fuel consumption rates. The document highlights features such as heavy-duty construction, ability to use waste fuels, fully automatic controls, and air pre-heating for high efficiency. It also lists related boiler and heat exchange products from the manufacturer.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about thermic fluid heaters. It describes the key components of the heaters including coils for circulating thermic fluid that provide three passes of heating, insulation, automatic burners and controls. It lists models varying in heat output from 50,000 to 20,000,000 KCAL/HR and corresponding fuel consumption rates. The document highlights features such as heavy-duty construction, ability to use waste fuels, fully automatic controls, and air pre-heating for high efficiency. It also lists related boiler and heat exchange products from the manufacturer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    92 views4 pages

    Energypack Thermic Fluid Heater

    Uploaded by

    utechprojects
    This document provides information about thermic fluid heaters. It describes the key components of the heaters including coils for circulating thermic fluid that provide three passes of heating, insulation, automatic burners and controls. It lists models varying in heat output from 50,000 to 20,000,000 KCAL/HR and corresponding fuel consumption rates. The document highlights features such as heavy-duty construction, ability to use waste fuels, fully automatic controls, and air pre-heating for high efficiency. It also lists related boiler and heat exchange products from the manufacturer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    THERMIC FLUID HEATER

    Wood Chips Firing


    External Furnace

    Solid Fired TFH


    with HRU

    Oil / Gas Fired


    TFH System

    Control Panel For


    Automatic Operation

    Higher Efficiency 88 2% For Liquid & Gas, 75 2% For Solid Fuel Firing

    Liquid Sealing Arrangement

    Simplex / Duplex Circulating Pump System

    Turnkey System

    THERMIC FLUID HEATER


    1. Outflow
    2. Return Flow
    3. Drain Valve
    4. Strainer
    5. Oil circulation Pump
    6. Isolating Valve
    7. Header
    8. Suction Valve
    9. Drain Pipe
    10.Drain Tank
    11.Air Expansion pipe
    12.Airvent
    13.Expansion Tank
    14.Separator
    15.Air Vent
    16.Chimney
    17.Airvent Valve
    18.Pressure Gauge

    THREE PASS VERTICAL / HORIZONTAL


    Ist Pass : First pass of the flue gas is downward inside spirally wound coil through which thermic oil
    circulates. Exposed to maximum heating area to radiant heat.
    IInd Pass : Upward in between the two spiraly wound coil. Convective heating area.
    IIIrd Pass : Downward between outside coil & inner shell. Unique shell design reduces stack loss.
    Insulation : Combustion air is forced between the two shells & aluminium radiator which acts as
    insulation for outer shell & preheats the air for better combustion efficiency.
    Burner & it's Controls : Fully automatic, downward firing, pressure jet, On-Off Modulation or High/
    Low modulation. Burner will have all safeties like flame failure device (Photocell), high temperature
    cut off, low flow safety, high pressure cut off. In case of abnormal condition unit will go in lockout
    with audio-visual alarm. The modulation is achieved by providing on-off temperature controller which
    will start & stop the burner according to heat load & reduces fuel consumption in proportion to heat
    load in plant giving best fuel efficiency for plant operation.

    LIQUID SEALING SYSTEM PREVENTS THERMIC OIL OXIDATON

    MODEL

    HEAT
    OUTPUT
    KCAL /
    HR

    GAS
    NM3 /
    HR

    EPT/05

    50,000

    EPT/10

    FUEL CONSUMPTION

    MODEL

    COAL
    KGS /
    HR

    BRIWOOD
    QUETTE KGS /
    KGS /
    HR
    HR

    L.D.O.
    KGS / HR

    F.O.
    KGS / HR

    5.5

    5.9

    EPT-EXT-05

    13

    17

    21

    1,00000

    14

    11

    11.8

    EPT-EXT-010

    26

    34

    42

    EPT/20

    2,00000

    28

    22

    23.6

    EPT-EXT-020

    52

    68

    84

    EPT/30

    3,00000

    42

    33

    35.4

    EPT-EXT-030

    78

    102

    126

    EPT/40

    4,00000

    56

    44

    47.2

    EPT-EXT-040

    104

    136

    168

    EPT/50

    5,00000

    68

    55

    59

    EPT-EXT-050

    130

    170

    210

    EPT/60

    6,00000

    84

    66

    72.8

    EPT-EXT-060

    156

    204

    252

    EPT/100

    10,00,000

    136

    110

    118

    EPT-EXT-100

    260

    340

    420

    EPT/150

    15,00,000

    204

    165

    177

    EPT-EXT-150

    390

    510

    630

    EPT/200

    20,00,000

    272

    220

    236

    EPT-EXT-200

    520

    680

    840

    CALORIFIC VALUE
    FURNACE OIL - 9650 KCAL/HR

    WOOD - 3200 KCAL/KGS

    LDO - 10,250 KCAL/HR

    BRIQUETTE - 4000 KCAL/KGS

    COAL - 5400 KCAL/KGS

    GAS - 8500 NM3/HR

    KEY FEATURES OF ENERGYPACK THERMIC FLUID HEATERS


    1. HEAVY CONSTRUCTION
    Energypack Thermic Fluid Heaters are fabricated as per latest engineering practice to ensure safety
    in operation along with a comparatively high efficiency level.
    2. THREE PASS FORCED CIRCULATION. Thermic Fluid circulates through Double Vertical Coil
    having Single/Double/Triple start depending on capacity. Three pass circulation guarantees a higher
    efficiency level which helps to enhance the most of the energy from the fuel.
    3. ABILITY TO USE WASTE AS A FUEL
    4. FULLY AUTOMATIC CONTROL To enhance the performance and to reduce operator involvement,
    Energypack thermic fluid heaters are supported with fully automatic control system including
    efficiency controls, safety controls and alarm notification. Specifically the high flue gas temperature
    control, controls demand set points such as temperature & pressure to supply energy depending on
    the plant demand.
    5. AIR PRE-HEATER TO ENHANCE THE EFFICIENCY To achieve utmost absorption of heat from
    the fuel, ENERGYPACK thermic fluid heaters are featured with air pre heater to heat the inlet air for
    the combustion process.
    6. COST EFFECTIVE DESIGNS Energypack provides cost effective design for chimneys, piping for
    TFH to reduce the cost involved with the TFH accessories. Energypack is capable to construct guy
    wire rope & self supported chimneys as per the latest available standards and to the clients
    specification.

    OTHER PRODUCTS
    IBR & NON IBR STEAM BOILERS

    Self Supported Chimneys.


    Hot water Boilers.
    Heat Exchangers (TEMA).
    Pressure Vessels (ASME).

    2Nos.CirculatingPumpAssy.

    Waste Heat Boilers.


    Electrode Boilers.
    Dewaxing Autoclave Boilers.
    Incinerators.

    CirculatingPump

    SteamGenerator

    M/S ENERGYPACK BOILERS PVT LTD


    Exclusively Marketed By

    Office :

    Registered Office & Works of Principle Manufacturer:

    9/10, Dattani 5A, Shivaji Road,


    Kandivali (West), Mumbai - 400067.
    Maharashtra, India.

    24-P, Baska - Uijeti Road, Village Uijeti,


    Taluka: Halol, Jilla, Panchamahal, Gujarat - 389350.

    UTECH PROJECTS PVT LTD.

    ENERGYPACK BOILERS PVT LTD.

    Telefax: +91 - 22 - 28642832 / 28642833

    Telefax: +91 - 02676 - 247055 / 247247


    Mumbai Off No: +91 22 26854233 / 26854957

    E mail : [email protected]
    [email protected]

    E mail : [email protected]
    [email protected]

    Website : www.utechprojects.com

    Website : www.energypackboilers.com

    You might also like