N OVA C O N T R O L S

L E A D I N G

T H E

W A Y

SystemsCompany

TOTAL ECLIPSE Quick Start Guide

for the TOTAL ECLIPSE CHEMICAL MANAGEMENT SYSTEM
The TOTAL ECLIPSE Controller is an integral part of the TOTAL ECLIPSE Chemical Management System, which also includes:
The Machine Interface Accepts washer signals and converts them to safe, low-voltage inputs.
The Pump Module Provides product transfer to the wash machine. The TOTAL ECLIPSE Controller is compatible with
any Nova Controls modular pumpstand. including the Eclipse, Orion or any of the Large Laundry dispensers.
The Flush Manifold (optional) Available for water flush chemical transfer applications.
Designed for maximum versatility in OPL or large laundry machines, the TOTAL ECLIPSE Controllers selectable Operating
Modes allow the system to work with trigger signals from fully-programmable washers or with manually triggered signals (or cycle
time extenders) from non-programmable, fixed-time washers. The Controllers easy-to-understand, plain-text LCD display (available
in a variety of languages), make operator training simple. Installation time and cost is significantly reduced with the computer based
Formula Editor program, allowing an off-site technician to create sets of up to 20 industry-specific, efficient and cost-effective
formulas that are loaded onto a controller with a customer-supplied USB flash drive (2 GB or smaller). Summary Reports can be
saved to the same USB flash drive, providing usage and programming information to effectively analyze and manage each machine.
Components Supplied

Wall Mount Bracket, Kit

(P/N 13-08462-00, Grey)
(P/N 13-08916-00, Black)

TOTAL ECLIPSE Controller

(P/N 01-08500-00, Grey/Teal)
(P/N 01-08900-00, Black/Red)

Quick Start Guide

(P/N 20-08808-00)

DOWNLOAD from the Nova Controls website (http://www.novacontrols.com):

Formula Editor Software for Windows 2000/XP/Vista, Linux & Mac OS 10.4
(Minimum requirements: Java JRE 1.5 or higher [90 MB disc space]; 1024 x 768 screen resolution; 128 MB RAM; 10 MB
disc space; USB 2.0 and a USB flash drive [2GB or smaller, FAT32 format] for data transfer to TOTAL ECLIPSE controller
Additional Language Files Two Types (for Formula Editor Software and for TOTAL ECLIPSE Controller Menus )
TOTAL ECLIPSE Complete Reference Manual at www.novacontrols.com/instructions.htm (P/N 20-08490-00)
How to Use the TOTAL ECLIPSE Quick Start Guide
Use this Quick Start Guide if you are already familiar
with installing and using dispensing systems. Please
refer to the TOTAL ECLIPSE Reference Manual for
detailed instructions, including information on the
optional Relay, Event, Occurrence and Group
Operating Modes. Refer also to the Installation and
Operations manual that is included with your
pumpstand or upgrade kit for additional instructions.

TOTAL ECLIPSE Controller Specifications

Size
Weight
Power Rating
Data Input Field Size
Pump Capacity
Environmental
Temperature
Humidity
Indoor Installation
Altitude

5.25" W x 4.0" H x 2.5" D ( 13.4 cm W x 10.2 cm H x 6.4 cm D)

0.65 lb. (0.30 kg)
SELV Power source is pumpstand
15 characters maximum input for custom names
99.99 oz. (2999 ml.) 8 pump (with 3 amount settings per pump) maximum
IP Rating 44
Pollution Category 2
Installation Category II
10 to 49 C (50 to 120 F) maximum
95% relative humidity, maximum
Approved for indoor use only. Must not be installed outdoors.
Install at or below 6,500 ft. (2000 m) maximum

IMPORTANT NOTE: Quick Start instructions

assume that Formula/Setup files will be loaded via a USB
Specifications subject to change without notice.
flash drive, which may override the following factory
default settings: Standard Operation; Eclipse Flush P.I.; Flush Time0 sec.; Cycle Time90 min.; Signal Filter Time2 sec.; User Prime Disabled;
Bleach DefeatOff; Units of Measure = SAE. Default Passwords are Installer = 01234; Manager = 0123. It is recommended that default passwords
are changed via the controllers keypad (and noted) after installation and system setup are complete. To change formulas, settings or passwords
using controller keys, or to add a machine or company name, see the Guide to Keypad and Menus (p. 5) and Initial Setup on Installer Menus (p. 6).
P/N 20-08808-00C

Copyright 2008 Nova Controls, Inc.

Installation
WARNING

ADVERTENCIA

Disconnect all power to the pumpstand during installation, service, and/or any time pump cabinet is opened. The TOTAL
ECLIPSE should be installed by a qualified technician only, in accordance with all applicable electrical and plumbing codes.
Desconecte toda la corriente elctrica al dosificador durante la instalacin, servicio y / o siempre que se abra el gabinete de la
bomba. El equipo TOTAL ECLIPSE debe ser instalado slo por tcnicos calificados y de acuerdo con todas las normas de
plomera y elctricas que apliquen.

Step 1. Install the Machine Interface (MI)

WARNING

ADVERTENCIA

Keep MI and communication cable away from high voltage wires and relays. NEVER parallel the cable with high voltage lines.
Mantenga M.I. y los cables de comunicacin separados de los cables de alta tensin y rels. NUNCA instale el cable paralelo
con las lneas de alta tensin.

1. Route MI signal wires through 1/2 inch knock-out on washer (within the wiring area).
Secure MI to washer with lock nut (provided).
2. Plug J2 cable into MI. Bundle excess J2 cable outside washer and connect other end
to J2 connector on rear of Controller.
3. Connect J1 cable from pump module to J1 connector on Controller. The maximum
distance for a J1 cable is 75 ft. (22.9 m.) unless using a break out box and hard wiring.
Contact Nova Controls for additional cables, a coupler or detailed instructions.
4. Secure J1 and J2 cables to controller tie-down posts with tie wraps.

MACHINE INTERFACE
(Front)

J2
Cable
Connection

(Rear)

Signal
Wires

TOTAL ECLIPSE Controller (Rear)

J2 Cable

J1 Cable

Step 2. Connect Signal Wires

Tie
Wraps

Voltage

The Machine Interface will work with any signal voltage between 24 240VAC or 22 24VDC. With DC signals, polarity
must be observed. Common is negative. The signals should be positive voltages.
CAUTION

Always verify all voltage sources with a meter. Electrical wiring connections for supply triggers are to be done inside the junction box.

CUIDADO

Siempre verifique la alimentacin de corriente con un voltmetro. Las conexiones elctricas a los disparadores de suministro
(supply) deben hacerse dentro del recinto donde se encuentran los suministros (supply).

Supply Trigger Wiring

Identify the washer supply signals. In Standard or

Group Mode of Operation, use appropriate terminal
connectors to connect the signal wires to the Machine
Interface wires, per table at right. (Do not use this
table for Event or Occurrence Modes; see Manual.)
Trigger Signal Wiring Notes:

Trigger

Supply
Signal

Signal
Common

Connect to:
Standard (US) Group (EU)

Signal 1

Black wire

White/Black

Pump 1

Signal 2

Brown wire

White/Brown

Pump 2

Group 1

Signal 3

Red wire

White/Red

Pump 3

Group 2

Signal 4

Orange wire

White/Orange

Pump 4

Group 2

Signal 5

Yellow wire

White/Yellow

Pump 5

Group 3

Group 1

If one or more pump signals are not used, they

Signal 6
Blue wire
White/Blue
Pump 6
Group 4
do not need to be connected.
If you are triggering more than one pump from a single signal, connect all MI signal wires for those pumps to that signal.
Wire nut unused wires. If washer has a single common, wire nut all commons together.
Step 3. Mount the Controller
1. Mount bracket with velcro-style strips, according the directions at
right. Install wall board screws or nuts and allen bolts, if needed.
2. Slide controller down onto mounting bracket until it snaps in place.
3. Install pump module and make all electrical and plumbing
connections for the system, but do not apply power to the TOTAL
ECLIPSE until you are ready to select a language of operation.

1 Attach Velcro-style Strips and Mount

2 (Optional)
Install Wall Board
Screws or Masonry
Nuts & Allen Bolts
Mounting Bracket
3 With J1 and J2 cables
connected, slide Controller
onto mounting bracket until it snaps into place.

Controller Language Options

Each TOTAL ECLIPSE controller is shipped with two languages installed: English/Spanish (Americas); English/German (EU); or
English/Simple Chinese (Asia). Additional languages may be downloaded from the Nova website directly to your USB flash drive
(2GB or smaller). If changing from a default languages, you will need your language-enabled USB flash drive for the next step.
2

P/N 20-08808-00C

Step 4. Select the Controller Menu Language (Before Applying Power)

EXIT
UP
ENTER
1. To select one of the pre-installed languages, skip to Step 2. To replace the non-English
language with a different language, connect a USB flash drive containing the new language
to the controllers USB port (under flap on right side of controller) BEFORE power-up.
LEFT
RIGHT
2. Apply power to pumpstand & power-up Controller. Each available LANGUAGE is displayed.
DOWN
3.
Move the selection box by using the UP or DOWN ARROWS until the correct
TOTAL ECLIPSE Keypad
language is contained within the box.
(Press & Hold for Auto-Key Repeat)
4.
Press Enter to select that language. All menu and application items are translated into
the new language. Text that was input by the installer remains in the original language and is not translated.
5. The Home Screen appears. You must now program the controller with formula and operational set-up files, using either a USB
flash drive or the controllers keypad.
Step 5. Program the Controller via USB Flash Drive
The easiest way to program the controller is by loading previously created set-up files from a USB flash drive onto the controller.
Settings that are not transferred via a USB drive are: Passwords (Installer & Manager); Machine Name; Company Name; Calibration.
1. Connect the USB flash drive containing set up files that were created in either the Formula Editor or on another controller.
2.
From the Home Screen, press ENTER to launch the MAIN MENU.
3.
Move the selection box to INSTALLER MENU (last item in the MAIN MENU) by pressing and holding the DOWN ARROW.
4.

Press ENTER and input the default Installer Password of 01234, using the UP
ARROW to move the cursor.

ARROW to increment the number and the

RIGHT

Press ENTER to accept the password input. Continue with Steps 3, 4, and 5 in the sequence illustrated below.

6. Remove USB flash drive. Press EXIT

to return to the Installer Menu, in order to calibrate (required) and prime pumps

Default Home Screen

1. Select Installer Menu

2. Input Password

3. Select Data Transfer

NOVA CONTROLS
F01

MAIN MENU

INSTL PASSWORD

INSTALLER MENU

01234

EMERGENCY PUMP STOP

LOAD SIZE: 200 LB
BLEACH DEFEAT: OFF
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS

INSTALLER MENU

OK

4. Display Files on USB

DATA TRANSFER

OK

EXIT

KEY until

1. Select Installer Service

2. Select Service Pumps

3. Select Prime Pump

5. Select Pump to Prime

INSTALLER MENU

INSTALLER SERVICE

SERVICE PUMPS

SET PRIME PUMP

INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE

SERVICE PUMPS
VIEW LOAD COUNT
VIEW LOAD WEIGHT
VIEW AMOUNT PUMPED
CLEAR DATA LOG

PRIME PUMP
PUMP CALIBRATION
NAME PUMPS
ENTER PRODUCT COSTS
DATE TUBE CHANGED

POG Restaurants
BLS Services
Eclipse Hotel
Hospital Settings
International Hotel
AA School District

WRITE REPORTS
READ SETUP
WRITE SETUP
UPDATE FIRMWARE

INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE

Step 6. Prime Pumps

to start and stop prime. After priming is complete, press the EXIT
Press Enter

5. Send File to Controller

SETUP FILE


5.

EXIT

you reach the Home Screen.

6. Start/Stop Prime
PRIME
P2

P1
P2
P3
P4
P5
P6

START/STOP

EXIT

Step 7. Calibrate Pumps

You must calibrate all pumps that will be used in a formula. Programmed formulas will not run if pumps are not calibrated.
Use CALIBRATE (VOLUME) only for medium (12 or 18 oz. / 355 or 532 ml. per minute) pumps.
2. Select Service Pumps

INSTALLER MENU

INSTALLER SERVICE

INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE

SERVICE PUMPS
VIEW LOAD COUNT
VIEW LOAD WEIGHT
VIEW AMOUNT PUMPED
CLEAR DATA LOG

3. Select Pump Calibration

SERVICE PUMPS
PRIME PUMP
PUMP CALIBRATION
NAME PUMPS
ENTER PRODUCT COSTS
DATE TUBE CHANGED

Use CALIBRATE (TIME) for large displacement pumps or

for a flush installation. Press START
and the timer
counts down 20 seconds. DO NOT stop the pump; run it
for a full 20 seconds, then enter the amount pumped.

P/N 20-08808-00C

4. Select Calibration Method

PUMP CALIBRATION
VIEW CALIBRATION
CALIBRATE (TIME)
CALIBRATE (VOLUME)

5. Select Pump to Calibrate

CALIBRATE (TIME)
P1
P2
P3
P4
P5
P6

5. Select Pump to Calibrate

CALIBRATE (VOL.)
P1
P2
P3
P4
P5
P6

P2
STOP PUMP AT 8 OZ
WARNING! PLACE
CONTAINER AT OUTPUT!
START/STOP
EXIT

6. Run Pump Full 20 Seconds

CALIBRATE
P2

6. Collect 8 oz [250 ml]

CALIBRATE

20.0

0.0

WARNING! PLACE
CONTAINER AT OUTPUT!
START/STOP
EXIT

6.1 Input Amount Collected

DISPENSED VOLUME
ENTER AMOUNT PUMPED


00.0 OZ

1. Select Installer Service

OK

EXIT

Home Screen

The Home Screen appears after the controller language has been selected or whenever the controller is active. If no key is pressed
for 15 minutes, Power Save turns off the displays backlight. Press any key to turn the backlight on and resume normal operation.
If the controller is powered off, the last formula selected is the active formula on the Home Screen when power is turned back
on. See the following graphic for an explanation of the information and symbols that may appear on the Home Screen.
Home Screen

Company Name (can be changed during System Setup)

NOVA CONTROLS
F03 TOWELS

Current Formula (or Next Formula to Run)

(Formula number appears if no name is input during System Setup)
NON-ACTIVE Pump Not programmed or calibrated; not in formula

Pumps

1 2 _

Trigger
Signals

5 6

_ 2 _ 4 _ _

ACTIVE Pump Currently running

READY Pump Calibrated and has amount(s) programmed
ERROR in Pump Amount(s) programmed; not calibrated

Non-Active
Signal

Qualified
Signal

Receiving
Signal
(unqualified)

Hot Keys: Formula Quick-Select

Main Menu

Formula Quick-Select

To prevent errors in data logging or chemical dispensing: Select the correct formula before
washer operation starts and be sure that all programmed pumps are triggered during the cycle.
From the Home Screen, press the EXIT key (also called FORMULA SELECT).
1.
2.
Press the UP or DOWN ARROW to move the selection box to the correct formula.
All formulas appear, but only formulas with programmed pumps are selectable.
3.
Press ENTER to start the formula and return to the Home Screen.
4. (Optional) Press ENTER

to reach the load size or bleach defeat settings.

Main Menu

Formula Quick-Select
NOVA CONTROLS
F03 TOWELS
1 2

_ _

SELECT FORMULA

FO1 PADS
F02 CURTAINS
FO3 TOWELS
F04 BED LINEN
F05 BLANKETS
F06 TABLE LINEN

To reach the Main Menu from the Home Screen, press any key (except the EXIT key).
Move Box

Main Menu

MAIN MENU
EMERGENCY PUMP STOP
LOAD SIZE
075 LB
BLEACH DEFEAT
OFF
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS

INSTALLER MENU

Emergency Pump Stop (stops all pumps and formulas)

Bleach Defeat Menu (default is OFF)

Load Size Menu (displays default load weight for formula.

Input actual weight at start of each load).

Selection Box Move box to select menu item.

Press ENTER

Select Formula

to launch selected menu

More Items Available (move Selection Box to view additional menus)

Return to Home Screen: Press EXIT

or wait 15 seconds without pressing a key.

Limited Warranty
SELLER warrants solely to BUYER the Products will be free from defects in material and workmanship under normal use and service for a period of one year
from the date of completion of manufacture. This limited warranty does not apply to (a) hoses; (b) and products that have a normal life shorter than one year; or
(c) failure in performance or damage caused by chemicals, abrasive materials, corrosion, lightning, improper voltage supply, physical abuse, mishandling or misapplication. In the event the Products are altered or repaired by BUYER without SELLERS prior written approval, all warranties will be void. NO OTHER WARRANTY, ORAL, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR
PURPOSE, IS MADE FOR THESE PRODUCTS, AND ALL OTHER WARRANTIES ARE HEREBY EXPRESSLY EXCLUDED.
SELLERS sole obligation under this warranty will be, at SELLERS option, to repair or replace F.O.B. SELLERS facility in Watsonville, California any Products
found to be other than as warranted.
Limitation of Liability
SELLERS WARRANTY OBLIGATIONS AND BUYERS REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED HEREIN. SELLER SHALL HAVE
NO OTHER LIABILITY, DIRECT OR INDIRECT, OF ANY KIND, INCLUDING LIABILITY FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OR FOR ANY OTHER CLAIMS FOR DAMAGE OR LOSS RESULTING FROM ANY CAUSE WHATSOEVER, WHETHER BASED ON
NEGLIGENCE, STRICT LIABILITY, BREACH OF CONTRACT OR BREACH OF WARRANTY.

P/N 20-08808-00C

TOTAL ECLIPSE Operator Menus

Home Screen

Formula Select

Guide to Keypad & Menus

SELECT FORMULA

NOVA CONTROLS
F02 CURTAINS
123X56788
_ 2 _ _ _ _
Main Menu

F01 PADS
F02 CURTAINS
F03 TOWELS
F04 BED LINEN
F05 BLANKETS
F06 TABLE LINEN

Select
& Return
to Home
 Screen

SELECTION
BOX

EMERGENCY STOP

350 LBS =

STOP ALL PUMPS

AND FORMULAS

STOP

EDIT
VALUE

UP/DOWN
LEFT/RIGHT
Arrows Input Arrows Move
Value (0-9, A-Z)
Cursor

MENU
SYMBOLS

Input Actual Load Weight

LOAD WEIGHT

MAIN MENU

HOME
SCREEN


220 LB

F02 
FO3
FO4 

More Items

Installer Menu Access

Bleach Defeat On/Off (Default Off)

MAIN MENU

OFF
ON

LOAD SIZE
180 LB
BLEACH DEFEAT
OFF
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS
INSTALLER MENUS

(SINGLE LOAD)
OK

EXIT

Select Pump to Prime (if enabled)

01234

P3 LIQUID BLEACH

OK

START/STOP

EXIT

EXIT

MANUAL FLUSH

EXIT

Input Manager Password

MGR PASSWORD
0123

OK

Set Date for Report Header

Set SAVE AS File Name & Date

REPORT DATE

REPORT NAME

00-00-00

EMERGENCY PUMP STOP

LOAD SIZE
220 LB
BLEACH DEFEAT
ON
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS

Start/Stop Flush (if flush enabled)

START/STOP

Main Menu (Manager Reports)

PRIME

WASH23 12-10-08

EMERGENCY PUMP STOP

LOAD SIZE
220 LB
BLEACH DEFEAT
ON
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS

P1 PRE-WASH

P2 DETERGENT
P3 LIQUID BLEACH
P4 BLEACH ALTERNATIVE
P5 SOUR/CONDITI
P6 ENZYME LIFT


INSTL PASSWORD

Start / Stop Prime Pump

EXIT

OK

Main Menu (User Manual Flush)

Trigger Signal Icon

(SINGLE LOAD)
OK
EXIT

SET PRIME PUMP

MAIN MENU
EMERGENCY PUMP STOP
LOAD SIZE
220 LB
BLEACH DEFEAT
ON
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS


Pumping &
Flushing

Main Menu (User Prime Pump)

Flushing

Pump Icon

BLEACH DEFEAT

EMERGENCY PUMP STOP

LOAD SIZE
220 LB
BLEACH DEFEAT OFF
USER PRIME PUMPS
USER MANUAL FLUSH

MANAGER REPORTS

Steady On

Pumping
(Flush Off)

Main Menu (Bleach Defeat)

EXIT
Only

MAIN MENU
EMERGENCY PUMP STOP
LOAD SIZE
275 LB
BLEACH DEFEAT OFF
USER PRIME PUMPS
USER MANUAL FLUSH

MANAGER REPORTS

ENTER
Saves
& Exits

EXIT

INSTALLER MENUS

Main Menu

or

EMERGENCY PUMP STOP

LOAD SIZE
275 LB
BLEACH DEFEAT OFF
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS


MAIN MENU

ENTER also
Starts/Stops
Action

Emergency Pump Stop

MAIN MENU

MAIN MENU

UP/DOWN
ENTER Key
Arrows Move
Launches
Selection Box Menu Item

EXIT

INSERT USB DRIVE

OK
EXIT

Display returns to Main Menu after data transfer is complete.

P/N 20-08808-00C

_ _

SAE / IMPERIAL (LB/OZ)

METRIC (KG/ML)

UNITS-MEASURE

5. Set Units of Measure

WRITE REPORTS
READ SETUP
WRITE SETUP
UPDATE FIRMWARE

DATA TRANSFER

4. Upload / Download Data

F01
F02 CURTAINS
F03 TOWELS
F04 BED LINEN
F05 BLANKETS
F06 TABLE LINEN

PROGRAM FORMULAS

3. Formula Programming

SET PUMP INTERFACE

SET CYCLE TIME
SIGNAL FILTER TIME
SET AFS TRIGGER
SET USER PRIME
SET LCD CONTRAST
CLEAR SETTINGS
VIEW SOFTWARE ID

EDIT INST PASSWORD

EDIT MGR PASSWORD
OPERATION MODE
EDIT ACCOUNT NAME
EDIT MACHINE NAME
EDIT COMPANY NAME

SYSTEM SETUP

2. Initial System Setup

EXIT

01234

EXIT

OK

01-01-08

EXIT

REPORT DATE

01234

OK

EXIT

0123

2.2 Edit Manager Password

MGR PASSWORD

F01 PADS
F02 CURTAINS
F03 TOWELS
F04 BED LINEN
F05 BLANKETS
F06 TABLE LINEN

HI-CAP 01-01-08

OK

EXIT

INSERT USB DRIVE

EXIT

P1
P1A
P1B
P1C

0 0 0 SEC
00.00 OZ
00.00 OZ
00.00 OZ

EXIT

OK

Overwrites ALL settings &

formulas, except passwords,
machine name, company
name & calibrations.

EXIT

EXIT

P2 DETERGENT
P3 LIQUID BLEACH
P4 BLEACH ALT
P5 SOUR/CONDITI
P6 ENZYME LIFT
P7

3.3 Set Count Pump

F01 COUNT PUMP

OK

50



2.12 Adjust Screen Contrast

LCD CONTRAST

OK

HOUSEKEEPING 01

HOTEL 17

SETUP NAME

EXIT

Overwrites le of same
name on USB ash drive.
Does not transfer passwords,
machine name, company
name or calibrations.

OK

INSERT USB DRIVE

EXIT

EXIT

EXIT

EXIT

OK

EXIT

STOP!!! DO NOT
PROCEED WITHOUT
PC UPDATE PROGRAM!

UPDATE FIRMWARE

4.4 Update Firmware

OK

NEW NAME

3.4 Edit Formula Name

NAME F01

OK

WARNING! ALL SETUPS

WILL BE CLEARED TO
FACTORY DEFAULTS!

2.13 Clear Controller Settings

CLEAR SETTINGS

OK

NOVA CONTROLS

2.6 Edit Company Name

COMPANY NAME

OK

WARNING! ALL LOGS

(LOADS & VOLUMES)
WILL BE CLEARED!

ZERO DATA LOG

1.5 Clear Data Log

4.3 Write Setup - Name File being sent

(from Controller to USB flash drive)

EXIT

0 0 0 LB

3.2 Default Load Weight

F01 LOAD SIZE

OK

DISABLE
ENABLE
LIMITED 30 SEC

SETUP FILE
POG Restaurants
BLS Services
Eclipse Hotel
Hospital Settings
International Hotel
AA School District

EXIT

2.11 User Prime Enable

SET USER PRIME

OK

0.0
0.0
0.0
0.0
0.0
0.0

2.5 Edit Machine Name

MACHINE NAME

P1 PRE-WASH
P2 DETERGENT
P3 LIQUID BLEAC
P4 BLEACH ALT
P5 SOUR/CONDITI
P6 ENZYME LIFT

HOTEL ECLIPSE - 67

4.2 Read Setup - Select File to

load from USB to Controller

DELAY
AMOUNT
AMOUNT
AMOUNT

F01 P1

3.1.3 Pump Settings

(0 = OFF)
OK

REPORT NAME_DATE

4.1.2 Set SAVE AS

File Name & Date

P1 PRE-WASH
P2 DETERGENT
P3 LIQUID BLEACH
P4 BLEACH ALT
P5 SOUR/CONDITI
P6 ENZYME LIFT

3.1.2 Add Pumps to Formula

F01 PUMPS

2 SECONDS
10 SECONDS
20 SECONDS
30 SECONDS
60 SECONDS
90 SECONDS

2.10 Auto-Formula Select

AFS TRIGGER

STANDARD
RELAY
EVENT
GROUP
OCCURRENCE

0
0
0
0
0
0

PUMPED (GAL)

1.4 View Amount Pumped

2.4 Edit Account Name

ACCOUNT NAME

F01 PADS
F02 CURTAINS
F03 TOWELS
F04 BED LINEN
F05 BLANKETS
F06 TABLE LINEN

TOTAL WEIGHT

1.3 View Load Weight

INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE

INSTALLER MENU

Installer Top Level Menu

2.3 Set-up Operating Mode

OPERATION MODE

0
0
0
0
0
0

TOTAL LOAD COUNT

1.2 View Load Count

OK

EXIT

INSTL PASSWORD

Input Installer Password

2.9 Set Trigger Signal Filter

TRIGGER FILTER

4.1 Set Date for Report Header

PUMP SETTINGS
SET DEFAULT WEIGHT
SET COUNT PUMP
EDIT NAME
CLEAR FORMULA

3.1 Set Formula

F01

OK

(0 = OFF)

9 0 MINUTES

2.8 Set Cycle Time Limit

CYCLE TIME LIMIT

OK

2.1 Edit Installer Password

INST PASSWORD

PRIME PUMP
PUMP CALIBRATION
NAME PUMPS
ENTER PRODUCT COSTS
DATE TUBE CHANGED

SERVICE PUMPS

INSTALLER SERVICE

SERVICE PUMPS
VIEW LOAD COUNT
VIEW LOAD WEIGHT
VIEW AMOUNT PUMPED
CLEAR DATA LOG

1.1 Pump Maintenance /Service

1. Service / Routine Maintenance

_ 2 _ 4 _ _

1 2 3

LOAD SIZE:
175 LB
BLEACH DEFEAT: OFF
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS
INSTALLER MENUS

MAIN MENU

Main Menu

NOVA CONTROLS
F03 TOWELS

225 Westridge Drive, Watsonville, California, USA 95076-4168

8 3 1 . 7 8 6 . 1 4 7 0  8 0 0 . 2 5 2 . N OVA ( 6 6 8 2 )  FA X : 8 3 1 . 7 8 6 . 1 6 5 2
www.novac ont rols.c om


Home Screen

(factory default settings shown in selection boxes)

TOTAL ECLIPSE Top Level Installer Menus



Systems Company


W A Y

T H E

L E A D I N G

N OVA C O N T R O L S


P/N 20-08808-00C

EXIT

DO NOT attempt firmware

update unless you have your
PC Update Program and
proper computer cable.

WARNING!

OK

WARNING! FORMULA
WILL BE CLEARED TO
FACTORY DEFAULT!

3.5 Clear Formula

CLEAR F01

TOTAL ECLIPSE
P / N : 95-08489-00A
REV: 687

2.14 Software Version ID

SOFTWARE VER

NON-FLUSH
ECLIPSE FLUSH P. I.
ORION I I FLUSH P. I.
8-PUMP FLUSH P. I.

2.7 Set Pump Interface

(and Flush Time, if needed)
PUMP INTERFACE

Enter / Save Key

- Launches selected menu item
- Saves changes & exits menu

Right / Left Arrow

During input, moves the
cursor (  ) to the next digit

Up / Down Arrow
- Moves Selection Box
- Changes digit value