Catalogo Trasnfer

Chelsea Power Take-Offs
P.T.O. General Information
WARNING User Responsibility

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND
PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users
having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance,
safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning
the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible
for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed
by the provisions stated in the Offer of Sale.
Copyright 2011, Parker Hannifin Corporation, All Rights Reserved
II
Chelsea P.T.O. Series Information

Mechanical Six Bolt P.T.O.s
Single Gear 6-Bolt
100.................................................................................................................................................................1
Two Gear 6-Bolt
221.................................................................................................................................................................1
290.................................................................................................................................................................2
442.................................................................................................................................................................2
447.................................................................................................................................................................3
660.................................................................................................................................................................3
Options Chart..................................................................................................................................................4-5
Mechanical Eight Bolt P.T.O.s
Single Gear 8-Bolt
812.................................................................................................................................................................6
Two Gear 8-Bolt
489.................................................................................................................................................................6
680.................................................................................................................................................................7
823.................................................................................................................................................................7
880.................................................................................................................................................................8
Options Chart................................................................................................................................................9-10
Powershift (Shift on the Go) Six & Eight Bolt P.T.O.s
6-Bolt
230/231........................................................................................................................................................11
236...............................................................................................................................................................11
238...............................................................................................................................................................12
243...............................................................................................................................................................12
252...............................................................................................................................................................13
270/271........................................................................................................................................................13
8-Bolt
800...............................................................................................................................................................14
852...............................................................................................................................................................14
885...............................................................................................................................................................15
Options Chart..............................................................................................................................................16-17
Powershift (Shift on the Go) Ten Bolt P.T.O.s
Two Gear 10-Bolt P.T.O.s
277...............................................................................................................................................................18
278...............................................................................................................................................................18
859...............................................................................................................................................................19
890/891/892.................................................................................................................................................19
Options Chart...............................................................................................................................................20
Constant Mesh Ten Bolt P.T.O.s
267...............................................................................................................................................................21
269...............................................................................................................................................................21
867...............................................................................................................................................................22
897/898/899.................................................................................................................................................22
Options Chart...............................................................................................................................................23
Ford TorqShift Transmission P.T.O.
247...............................................................................................................................................................24
248...............................................................................................................................................................25
Options Chart...............................................................................................................................................26

IMPORTANT: This publication provides general information about our products. Please refer to the
Application Catalog and Owners Manuals for Installation Instructions and Safety Information.
III
Reversible P.T.O.s
Forward & Reverse 6-Bolt
340...............................................................................................................................................................27
Forward & Reverse 8-Bolt
352...............................................................................................................................................................27
863...............................................................................................................................................................28
Options Chart...................................................................................................................................................28
Rear Mount P.T.O.s
Rear Mount P.T.O. for ZF Meritor FreedomLine Transmissions
522...............................................................................................................................................................29
Thrushaft
541...............................................................................................................................................................29
Rear Mount P.T.O.s for Caterpillar Transmissions
CAT-D...........................................................................................................................................................30
CAT-H...........................................................................................................................................................30
Options Chart...................................................................................................................................................31
Dual Output P.T.O.
452...............................................................................................................................................................32
Options Chart...................................................................................................................................................32
Asia Pacific P.T.O.s
Mitsubishi MO5OS5, MO6OS6 & MO7OS6 Transmissions
429...............................................................................................................................................................33
Hino LF06S & LJ06S Transmissions
435...............................................................................................................................................................33
Options Chart...................................................................................................................................................34
Split Shaft P.T.O.s
901...............................................................................................................................................................35
912...............................................................................................................................................................35
941...............................................................................................................................................................36
Options Chart...................................................................................................................................................36
Crankshaft Driven P.T.O.s
2230U...........................................................................................................................................................37
2442.............................................................................................................................................................37
Options Chart...................................................................................................................................................38
Geared Adapters
Geared Adapters Overview..............................................................................................................................39
Geared Adapters Kits
626 Kit-Style Geared Adapters.....................................................................................................................40
Shifter Options ..................................................................................................................................................43
P.T.O./Dump Pump Combo Valves...................................................................................................................44
Offer of Sale .......................................................................................................................................................47
IV
Mechanical Six Bolt Power Take-Offs

100 Series
Single speed, low torque applications
Compact size for tight areas
Sturdy cast iron housing
Available for most transmissions
Specifications Chart 100 Series

100*R
Standard Output Shaft Size
7/8" Round
Intermittent Torque Rating (Lbs. ft.)
125
Intermittent Torque Rating (N.m.)
169
Horsepower Rating for Intermittent Service
At 500 R.P.M. of Output Shaft (HP)
12
24
At 500 R.P.M. of Output Shaft (Kw)
9
18
Approximate Weight:
10 lbs. [4.5 kg]
221 Series
Manual and Automatic transmissions
Available with both a standard housing or a
special low-profile housing
Pressure Lube option
Wide range of pump flanges

221*C
221*E
221*L
1-1/4" Round w/key
250
250
200
339
339
271
24
24
19
48
48
38
18
18
14
36
36
28
Approximate Weight:
30 lbs. [13.6 kg]

290 Series
290 Series fits the Eatons 4106 used in Mack
Midliners and Macks T2060A transmissions
Mounts directly to transmissions, no geared
adapters needed
Cast iron housing for strength and tapered cone
bearings for increased load capacity

290*F
290*L
290*Q
Standard Output Shaft Size 1-1/4" Round w/key
175
175
175
237
237
237
17
17
17
33
33
33
12
12
12
25
25
25
Approximate Weight: 37 lbs. [16.8 kg]
290*U
175
237
17
33
12
25
442 Series
Engineered to work with virtually all existing transmission applications
Economical workhorse features a cast iron housing
Tapered cone bearings for high torque rating and long service life
Slip fit idler pin for easy interchange from one transmission to another
Easy to set backlash
Wide range of shift and output options

442*A 442*B 442*C 442*F 442*H 442*L 442*Q 442*R 442*S 442*U 442*W 442*X
250
250
250
250 250
250
225
225
200
195
175
140
339
339
339
339 339
339
305
305
271
264
237
190
At 500 R.P.M. of Output Shaft (HP) 24
24
24
24
24
24
21
21
19
19
17
13
48
48
48
48
48
43
43
38
37
33
27
At 500 R.P.M. of Output Shaft (Kw) 18
18
18
18
18
18
16
16
14
14
12
10
36
36
36
36
36
32
32
28
28
25
20

447 Series
Eliminates interference problems inside transmission/P.T.O. opening
One-piece input/ratio gear
Pressure Lube option

447*Q
447*R
447*S
447*U
1-1/4" Round w/key
225
225
200
195
305
305
271
264
21
21
19
19
43
43
38
37
16
16
14
14
32
32
28
28
Approximate Weight:
21 lbs. [9.5 kg]
447*W
175
237
17
33
12
25
660 Series
Flexible design works with most popular transmission applications
Designed for higher torque applications such as pneumatic blowers
Several speed ratios to choose from

660*F
660*Q
660*R
*Intermittent Torque Rating At 1500 R.P.M. or less (Lbs. ft.)
375
375
350
*Intermittent Torque Rating At 1500 R.P.M. or less (N.m.)
508
508
475
36
36
33
71
71
67
107
107
100
27
27
25
53
53
50
80
80
75
Approximate Weight: 28.2 lbs. [12.8 kg]
660*S
325
441
31
62
93
23
46
69
*Above 1500 R.P.M.: Call for Approval
P.T.O. Options Chart 6-Bolt P.T.O.s

Mechanical Six Bolt Series
Lubrication
X
Standard
x
x
x
x
x
P
Pressure

x
x
x
W
Wet Spline
x

Shifting
A
Air
x
x
x
x
x
C
Heavy Duty Bracket Less Cable
x
x
x
x
H
Less Wire Shift
x x
x
x
x
M
Constant Mesh

x
x
x
P
Electric/Air 12V
x
x
x
x
x
S
P.T.O./Dump Pump Combo w/Kick Out & Spring Return
x
x
x
x
x
T
P.T.O. & Pump Valve Less Kick Out & Neutral Spring Return
x

x
x
V
Air Shift Less Installation Kit
x
x
x
x
x
W
Wire
x
x
x
x
X
Wire, Less Cable & Knob
x
x
x
x
U
P.T.O./Pump Valve w/Kick Out
x
x
x
x
x
x
x
x
x
x
x
x
Output

AA
Special Pump for Europe

x
x
x
AF
S.A.E. B 2 or 4-Bolt Flange, BB Shaft (1.00" - 15 Tooth)
x (w) x
x
x
AK
S.A.E. B 2-Bolt Flange, B Shaft (7/8" - 13 Tooth)

x
x
x
x
AZ
Non Standard Flange, C Shaft (1-1/4" - 14Tooth)

x
x
x
x
GA
Rotatable B 2-Bolt Flange, B Shaft (7/8" - 13 Tooth) (Greaseable)

x
x
x
GB

x
x
x
GE
Rotatable S.A.E. A 2 or 4-Bolt Flange, A Shaft (5/8" - 9 Tooth) (Greaseable)
x
x
x
GF
S.A.E. B 2 or 4-Bolt Flange, BB Shaft (1.00" - 15 Tooth) (Greaseable)

x
x
x
GH
Rotatable B 2-Bolt Flange, BB Shaft (1.00" - 15 Tooth) (Greaseable)

x
x
x
x
GJ

x
x
x
x
GK
S.A.E. B 2 or 4-Bolt Flange, B Shaft (7/8" - 13 Tooth) (Greaseable)

x
x
x
GP
S.A.E. A 2-Bolt Flange, B Shaft (7/8" - 13 Tooth) (Greaseable)

x
x
x
GQ**

x
x
x
GR
Chelsea Special Pump Mount, B Shaft (7/8" - 13 Tooth) (Greaseable)

x
x
x
GY
DIN 5462 Pump Mounting (Greaseable)

x
x
x
GZ
Non Standard Flange, C Shaft (1-1/4" - 14 Tooth) (Greaseable)

x
x
x
LA
S.A.E. B 2-Bolt Flange w/Lube Pump (Same as AK)

x
x
x
LB
S.A.E. A 2-Bolt Flange w/Lube Pump (Same as XP)

x
x
x
LC
S.A.E. A 2-Bolt Flange w/Lube Pump (Same as XQ)

x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
NOTE: (w) = Available as a Wet Spline Output

**XQ/GQ same as XK/GK except flange rotated 90

***Order companion (3-1-604) separately
Check the current price book for available options.
100 221 290 442 447 660

x
x

Mechanical Six Bolt Series
100 221 290 442 447 660
LD
1-1/4" Round Shaft w/Lube Pump (Same as XD)

x
x
x
LF
S.A.E. B 2 or 4-Bolt Flange w/Lube Pump (Same as XK)

x
x
x
RA
Rotatable B 2-Bolt Flange, B Shaft (7/8" - 13 Tooth)

x
x
x
x
RB

x
x
x
x
RC
Rotatable A 2-Bolt Flange, A Shaft (5/8" - 9 Tooth)

x
x
x
x
RD
Rotatable A 2-Bolt Flange, B Shaft (7/8" - 13 Tooth)

x
x
x
x
RE
Rotatable B 4-Bolt Flange, BB Shaft (1.00" - 15 Tooth)

x
x
x
x
RF

x
x
x
x
RH
Rotatable S.A.E. A 2-Bolt, S.A.E. 9-14 Shaft (3/4" - 11 Tooth)
x
RY
Rotatable DIN 5462 Pump Flange

x
x
SQ
x
XA
7/8" Round Shaft w/key
x
XD
1-1/4" Round Shaft

x
x
x
x
XE
S.A.E. A 2 or 4-Bolt Flange, A Shaft (5/8" - 9 Tooth)

x
x
x
x
XG
Non Standard S.A.E. B 2-Bolt Flange, Non Standard Shaft (3/4" w/3/16" key)

x
x
x
x
XJ
Non Standard S.A.E. A 2-Bolt Flange, Non Standard Shaft (3/4" w/3/16" key)

x
x
x
x
XK
S.A.E. B 2 or 4-Bolt Flange, B Shaft (7/8" - 13 Tooth)

x
x
x
x
XQ**

x
x
x
XR
Non Standard Flange, B Shaft (7/8" - 13 Tooth)

x
x
x
x
XV
1-1/4" Rd w/1310 Series Flanges

x

XX
No Shaft (Housing Kit)
x
XX***
1-1/4" S.A.E. Tapered Shaft w/keyway

x
x
x
x
XY
DIN 5462 Pump Mounting

x
x
x
x

x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
NOTE: (w) = Available as a Wet Spline Output

**XQ/GQ same as XK/GK except flange rotated 90

***Order companion (3-1-604) separately
Mechanical Eight Bolt Power Take-Offs

812 Series

Only Single gear 8-Bolt P.T.O. in the industry

High torque for extra heavy duty applications
Ideal for Chelsea 912 Series split shaft applications
Rotatable pump flanges available

Approximate Weight:
812R
1-1/4" Round w/key
400
542
38
76
28
57
50 lbs. [22.7 kg]
489 Series
442 Series family, but with an 8-Bolt mounting flange
No adapter plate needed
Less installation time, less expense and less chance of leakage
Wide range of shifters options and pump flanges

489*A 489*C 489*F 489*H 489*L 489*Q 489*R 489*S 489*U 489*W 489*X
250
250
250
250
250
225
225
200
195
175
140
339
339
339
339
339
305
305
271
264
237
190
24
24
24
24
24
21
21
19
19
17
13
48
48
48
48
43
43
38
37
33
27
18
18
18
18
18
16
16
14
14
12
10
36
36
36
36
32
32
28
28
25
20

680 Series
Excellent coverage for transmissions with 8-Bolt openings
Deep mount housing option for Mack applications
Several speed ratios to choose from

680*F
680*Q
680*R
1-1/4" Round w/key
*Intermittent Torque Rating At 1500 R.P.M. or less (Lbs. ft.)
375
375
350
*Intermittent Torque Rating At 1500 R.P.M. or less (N.m.)
508
508
475
36
36
33
71
71
67
107
107
100
27
27
25
53
53
50
80
80
75
Approximate Weight:
28.2 lbs. [12.8 kg]
680*S
325
441
31
62
93
23
46
69
*Above 1500 R.P.M.: Call for Approval
823 Series
Robust design for high torque applications
Lever shift standard
Inspection cover for adjusting backlash
Popular pump mounts available

823*B
823*D
823*G
823*J
823*M
823*R
1-1/2" - 10T Spline w/1410 Flange
500
500
500
500
500
400
678
678
678
678
678
542
48
48
48
48
48
38
95
95
95
95
95
76
36
36
36
36
36
28
71
71
71
71
71
57
823*T
350
475
33
67
25
50

880 Series
Wide coverage for tough applications
Speed ratios for high and low speed applications
Removable shift cover for adjusting backlash
Dual-pump output for mounting a pump on each end of the P.T.O.

880*B
880*D
500
500
678
678
48
48
95
95
36
36
71
71
Approximate Weight:
880*G
880*J
880*M
880*Q
500
500
500
450
678
678
678
610
48
95
36
71
48 48
95 95
36 36
71 71
63 lbs. [28.6 kg]
43
86
32
64
880*R
880*T
400
542
350
475
38
76
28
57
33
67
25
50

P.T.O. Series
489
680
812
823
Lubrication
X
Standard
x
x
x
x
P
Pressure
x
x
x
Shifting
A
Air
x
x
x
x
C
x
x
H
Less Wire Shift Cover
x
x
M
Constant Mesh
x
x
x
P
Electric/Air 12V
x
x
x
S
P.T.O. & Combo Valve
x
x
T
P.T.O. & Pump Valve Less Kick Out & Neutral Spring Return
x
x
U
P.T.O. & Pump Valve with Kick Out Less Neutral Spring Return
x
x
V
x
x
x
W
Wire
x
x
x
X
Less Cable & Knob
x
Y
Lever
x
x
x
x
Z
12 Volt Electronic Shift
x
x
Output
AB
DIN 120 Flange
x
x
AC
DIN 100 Flange
x
x
AF
x
AK
x
x
AZ
Non Standard Flange, C Shaft (1-1/4" - 14 Tooth)
x
x
GA
x
x
GB
x
x
GF
x
x
GH
x
x
GJ
x
x
GK
x
x
GP
x
x
GQ*
x
x
GR
x
GS
S.A.E. C 4-Bolt Flange, C Shaft (1-1/4" - 14 Tooth) (Greasable)
x
GS
S.A.E. C 2 or 4-Bolt Flange, C Shaft (1-1/4" - 14 Tooth) (Greasable)
GY
x
x
GZ
x
x
PA
Special Rotatable S.A.E. B 2-Bolt Flange for Parker P Series

Sculptured Pump, B Shaft (7/8" - 13 Tooth)
x
PF
Special Rotatable S.A.E. B 2-Bolt Flange for Parker P Series

Sculptured Pump, BB Shaft (1.00" - 15 Tooth)
x
LA
x
LB
x
LC
x
LD
x
LF
x
LG
1-1/2" - 10T Spline w/1410 & Lube Pump (Same as XV)
x
LH
S.A.E. C 2 or 4-Bolt Flange w/Lube Pump (Same as XS)
x
LJ
S.A.E. C 2-Bolt Flange w/Lube Pump (Same as XU)
x
RA
x
x
880
x
x
x
x
x
x
x
x
x
x
x
NOTE: *XQ/GQ same as XK/GK except flange rotated 90

Continued on Next Page

P.T.O. Series
489
680
812
823
880
RB
x
x
x
RC
x
x
RD
x
x
RE
x
x
RF
x
x
RY
x
x
SK
Double Pump S.A.E. B 2 & 4-Bolt Flange, B Shaft

(7/8" - 13 Tooth) & S.A.E. C 2 & 4-Bolt Flange,

C Shaft (1-1/4" - 14 Tooth)
x
SS
Double Pump S.A.E. C 2 & 4-Bolt Flanges, C Shafts (1-1/4" - 14 Tooth)
x
XD
1-1/4" Round Shaft
x
x
x
XE
x
x
XG
Non Standard S.A.E. B 2-Bolt Flange, Non Standard Shaft

(3/4" w/3/16" Key)
x
x
XJ
Non Standard S.A.E. A 2-Bolt Flange, Non Standard Shaft

(3/4" w/3/16" Key)
x
x
XK
x
x
x
XQ*
x
x
XR
1-1/2" - 10T Spline w/1410 Series Flange
x
x
x
XS
S.A.E. C 2 or 4-Bolt Flange, C Shaft (1-1/4" - 14 Tooth)
x
x
XS
S.A.E. C 4-Bolt Flange, C Shaft (1-1/4" - 14 Tooth)
x
XU
S.A.E. C 2-Bolt Flange, C Shaft (1-1/4" - 14 Tooth)
x
XV
x
x
x
XW
S.A.E. C 2 or 4-Bolt Wet Spline
x
XX
1-1/4" Tapered Shaft for Companion Flange 3-1-604
x
x
x
XX
No Shaft
XY
x
x
x
x
YY
Double Pump DIN 80
x
x


10
Powershift (Shift on the Go) Six & Eight Bolt Power Take-Offs
230/231 Series
Designed for both Manual and Automatic transmissions
Electric-over-air shifting
231 offers low profile housing for avoiding clearance problems
Pressure lubrication option available for both units
Internal self adjusting shaft brake option (patent # 7159701)
P.T.O./Dump Pump combo valve shift option available
Series Specifications Chart 230/231 Series

230*A,B,D,K & Q
230*A,B,D,K & Q 231*A,B,D,K & Q

w/Pressure Lube
w/Standard Lube w/Pressure Lube
300
250
250
407
339
339
29
24
24
57
48
48
21
18
18
43
36
36
Approximate Weight:
49 lbs. [22 kg]

231*A,B,D,K & Q
w/Standard Lube
225
305
21
43
16
32
236 Series
Wide selection of input gears for virtually all currently
produced transmissions
Helical gears and optional pressure lubrication to extend
P.T.O. service life
Inspection cove for adjusting backlash
Series Specifications Chart 236 Series

236*D,K & Q
1-1/4" Round w/key
250
339
24
48
18
36
Approximate Weight:
49 lbs. [22 kg]
236*U
225
305
21
43
16
32
11
238 Series
Slip Fit Idler Pin for ease of servicing
Comes as a KIT P.T.O. Same input gears as
236 & 442 Series
Inspection Cover for setting backlash accurately
Shaft Brake Option (BD) (patent # 7159701)
Industry setting standard for product pump applications
P.T.O./Dump Pump Combo Valve shift option available

238*D,K & Q
1-1/4" Round w/key
250
339
24
48
18
36
Approximate Weight:
49 lbs. [22 kg]
238*U
225
305
21
43
16
32
243 Series
Designed for Aisin and Mitsubishi transmissions
Lightweight housing allows for maximum heat dissipation
Controlled Compression Interface Gasket eliminates setting backlash
Electronic Overspeed Control available

Approximate Weight:
12
243*G
1" Round w/key
85
115
8
16
6
12
18 lbs. [8.1 kg]
252 Series
Controlled Compression Interface Gasket eliminates the setting of
gear backlash
Lightweight Housing Design allows for maximum heat dissipation
Excellent Gear Contact Ratio provides quiet operation
Weather Tight Electrical Connectors secure under vehicle connections
Integrated Cartridge Valve reduces installation time
Compact Size can fit through dodge floor access panel for
transmission installation saving time
Torque up to 120 Lbs. ft. powers your application requirements
Two Speed Ratios covers varying applications

252*D
1" Round w/key
120
163
11
23
9
17
Approximate Weight:
25 lbs. [11 kg]
252*M
50
68
5
10
4
7
270/271 Series
Designed for Automatic transmissions
Electric-over-hydraulic shifting
271 offers low profile housing for avoiding clearance problems
Pressure lubrication available for both units
Series Specifications Chart 270/271 Series

270*A,B,D & K
270*A,B,D & K

w/Pressure Lube w/Standard Lube
1-1/4" Round w/key
300
250
407
339
29
24
57
48
21
18
43
36
Approximate Weight:
49 lbs. [22 kg]
271*A,B,D & K
All Lube Types
250
339
24
48
18
36
13
800 Series
Only Single Gear Powershift P.T.O. on the market today
Compact size makes it a good solution when space is limited
Electric-over-hydraulic shifting
Pressure Lubrication standard

Approximate Weight:
800*M
1-1/8" Round w/key
250
339
24
48
18
36
38 lbs. [17 kg]
852 Series
Designed for Heavy Duty applications
Three speed ratios to choose from
Pump flanges to fit most popular hydraulic pumps
Pressure Lubrication standard

Approximate Weight:
14
852*B, G, J
500
678
48
95
36
71
88 lbs. [40 kg]
Powershift (Shift on the Go) Power Take-Offs

885 Series
Designed for Heavy Duty applications such as pneumatic blowers
Rugged cast iron housing
Four speed ratios to choose from
Pressure Lubrication available

Approximate Weight:
885*B, G, J, M
500
678
48
95
36
71
88 lbs. [40 kg]
15
P.T.O. Options Chart Powershift 6 & 8-Bolt P.T.O.s

P.T.O. Series
230/231 236
238 243 252 270/271 800 852

Lubrication
X
Standard
x
x
x
x
x
x
P
Pressure
x
x
x
x
x
x
x
Shifting
A
Air Shift (Pilot Valve)
x
x
x
B
Electric/Hydraulic 12V
x
x
x
x
x
D
Electric/Hydraulic 24V
x
x
x
x
x
F
No Valve
x
J
Elec./Air 24V w/E.O.C.
x
K
Elec./Hyd. 12V w/E.O.C.
x
x
x
x
L
Elec./Hyd. 24V w/E.O.C.
x
x
x
x
N
Elec./Air 12V w/E.O.C.
x
P
Electric/Air 12V
x
x
x
Q
Electric/Air 24V
x
x
x
S
Air Shift w/P.T.O./Dump Pump

Combo Valve
x
x
x
x
T
Air Shift w/P.T.O./Dump Pump Combo

Valve less Kick Out & Spring Return
x
x
x
x
V
Air Shift, Less Installation Kit
Output
AB
DIN 120
AD
S.A.E. A 2-Bolt
x
AF
S.A.E. BB 2-Bolt
x
x
x
x
BA
1-1/4" Round Shaft w/Self Adjusting

Shaft Brake (Automatic Transmissions)
x
x
BD*
1-1/4" Round Shaft w/Self Adjusting

Shaft Brake (Manual Transmissions)
x
x
x
RA
Rotatable B 2-Bolt
x
x
x
x
RB
Rotatable B 4-Bolt
x
x
x
x
RF
Rotatable B 2-Bolt
x
x
x
x
XB
1" Round Shaft
x
x
XC
1-1/8" Round Shaft
x
XD
1-1/4" Round Shaft
x
x
x
x
XE
S.A.E. A 2-Bolt
x
x
x
x
x
x
XK
S.A.E. B 2 or 4-Bolt
x
x
x
x
XP
S.A.E. A 2-Bolt
x
x
x
x
XR
Chelsea Special
x
x
x
x
XS
S.A.E. C 2 or 4-Bolt
x
XU
S.A.E. C 2-Bolt
x
XV
x
XX
1-1/4" Tapered Shaft w/DIN 100 Flange
x
x
x
x
XY
Special (DIN 5462)
x
x
x
x
XZ
1-1/8" Tapered Shaft
x
45
P16-45A-1D6
x
65
P16-65A-1D6
x
85
P16-85A-1D6
x
00
P16-100A-1D6
x
15
P16-115A-1D6
x
45
P16-45C-1D6
x
65
P16-65C-1D6
x
*Not For Use on Automatic Transmissions
16
885
x
x
x
x
x
x
x
x
x
x
x
P.T.O. Options Chart Powershift 6 & 8-Bolt P.T.O.s

P.T.O. Series
230/231
236
238
243
252 270/271 800
852
885
85
P16-85C-1D6
x
15
P16-115C-1D6
x
508
CGP-P5C008-1AA
x
510
CGP-P5C010-1AA
x
513
CGP-P5C013-1AA
x
519
CGP-P5C019-1AA
x
1116
CGP-P11C016-1AC
x
1121
CGP-P11C021-1AC
x
1126
CGP-P11C026-1AC
x
1129
CGP-P11C029-1AC
x
1137
CGP-P11C037-1AC
x
1449
CGP-P31C054-1AE
x
1462
CGP-P31C061-1AE
x
*Not For Use on Automatic Transmissions
17
Powershift (Shift on the Go) Ten Bolt Power Take-Offs

277 Series
Exceeds the torque capacity of a 6-Bolt P.T.O. while
offering the tighter sealing of a 10-Bolt pattern
Available with a Rotatable Wet Spline option RK
(patent pending)
Combo Valve shift option available for P.T.O./Dump
Pump systems
SuperTorque gears available for 20% higher intermittent
torque ratings
Cartridge Valve Assembly for reduced interference
Wet Spline Options available
Shaft Brake option (patent # 7159701) available for product pump applications

277*B 277*D 277*G 277*M 277*S 277SB

335
325
300
265
250
402
454
441
407
359
339
545
31
29
25
24
38
62
57
50
48
77
23
21
19
18
29
46
43
38
36
57
Approximate Weight:
49 lbs. [22 kg]
277SD 277SG 277SM 277SS

SuperTorque
390
529
360
488
318
431
265
359
37
74
28
56
34
69
26
51
30
61
23
45
25
50
19
38
278 Series
Enhanced housing design for maximum transmission
clearance when direct mounting a pump
Available with a Rotatable Wet Spline option RK (patent pending)
Combo Valve shift option available for P.T.O./Dump Pump systems
SuperTorque gears available for 20% higher
intermittent torque ratings
Wet Spline Options Available
Shaft Brake option (patent # 7159701) available for product pump applications

278*B 278*D 278*G 278*M 278*S 278*T 278SB 278SD 278SG 278SM 278SS 278ST

SuperTorque

1-1/4" Round w/key
335
325
300
265
250
225 402
390 360
318
265
240
454
441
407
359
339
305 545
529 488
431
359
325
31
29
25
24
21 38
37 34
30
25
23
62
57
50
48
43 77
74 69
61
50
46
23
21
19
18
16 29
28 26
23
19
17
46
43
38
36
32 57
56 51
45
38
34
Approximate Weight:
49 lbs. [22 kg]
18
Powershift (Shift on the Go) Ten Bolt Power Take-Offs

859 Series
Highest torque capacities of any P.T.O. offered for the
Allison World transmissions
P.T.O. Torque ratings from 285 to 575 Lbs. ft.
Electronic Overspeed Control available to protect
driven equipment from overspeeding
Advanced gear design for increased tooth-contact ratio
for quieter operation

859*G
859*J
859*M
859*R
859*S
859*T
575
525
490
415
385
350
780
712
664
563
522
475
55
50
47
40
37
33
109
100
93
79
73
67
41
37
35
30
27
25
82
75
70
59
55
50
Approximate Weight:
66 lbs. [30 kg]
859*W
285
386
27
54
20
41
890/891/892 Series
Moves the P.T.O. mounting flange to the rear of the
transmission allowing larger pumps and in some cases
it will eliminate the need for a drive shaft
Require less space than current P.T.O.s. Will help clear
frame rails etc.
Torque ratings up to 670 Lbs. ft. allows the use of higher
flow and pressure pumps
890 used on Allison 3000/4000 Series Transmissions
891 used on Allison 4000 Series with Integral Oil Cooler
892 used on Allison 4700 Series Transmissions
Wet Spline outputs extends shaft life and eliminates the need to disassemble to frequently grease the splines
Specifications Chart 890/891/892 Series

890/891/892*A 890/891/892*B 890/891/892*C 890/891/892*D 890/891/892*E 890/891/892*F
Standard Output Shaft Size 1-1/4" - 14T Spline
670
630
590
550
485
430
908
854
800
746
658
583

60
56
52
46
41

120
112
105
92
82

45
42
39
35
31

90
84
78
69
61
Approximate Weight: 86 lbs. [39 kg]
NOTE: *Check Application Pages for Actual Torque Ratings
19
P.T.O. Options Chart - Powershift 10-Bolt P.T.O.s

P.T.O. Series
277 278 859 890/892 891

Lubrication

P
Pressure Lube
x
x
x
R
Pressure Lube with Solenoid Cap Rotated 120

x
x
V
Rotated Valve Cap, Wet Spline
x
x
x
x
W
Wet Spline
x
x
x
x
x

Shifting

B
12 Volt Electric/Hydraulic

x
x
x
x
x
D

x
x
x
x
x
G
12 Volt Electric/Hydraulic w/Remote Mounted Solenoid Valve

x
x
x
x
x
H

x
x
x
x
x
K
12 Volt Electric/Hydraulic w/Electronic Overspeed Control

x
x
x
x
x
L

x
x
x
x
x
M
Constant Engagement No Shifter

M
12 Volt w/o Installation Kit (Europe Only)
x
x
x
N
x
x
x
S
Air Shift w/P.T.O./Dump Pump Combo Valve
x
x
T
Air Shift w/P.T.O./Dump Pump Combo Valve less Kick Out & Spring Return x
x

Output

AB
DIN 120 Flange

x
x
x
x
AC
DIN 100 Flange

x
x
x
x
AF*
x (w) x (w)

(w)
AK*

AZ
S.A.E. B 2 or 4-Bolt Flange, C Shaft (1.25" - 14 Tooth)

x
(w)
BA
Shaft Brake w/1-1/4" Round Shaft
x
x
x
BB
Shaft Brake, DIN 120
x
BC
Shaft Brake, DIN 100
x
CS
S.A.E. C 2 or 4-Bolt Flange, C Shaft (1.25" - 14 Tooth)
(w)
CK
(w)
CF
(w)
CZ
(w)
PA
Special Rotatable S.A.E. B 2-Bolt Flange for Parker P Series Sculptured

Pump, B Shaft (7/8" - 13 Tooth)
x
x
PF

Pump, BB Shaft (1.00" - 15 Tooth)
x
x
RC

RD

RE

RF
x
x
RG
x
x
RK
Rotatable B 2 or 4-Bolt Flange, B Shaft (7/8" - 13 Tooth)
x (w) x (w)
RY

XD
x
x
XE
x
x
(w)
XK
x (w) x (w)
XP
Special S.A.E. A Pilot 2 or 4-Bolt Flange, B Shaft (7/8" - 13 Tooth)
x
x
XQ

XR
Non-Standard Flange, B Shaft (7/8" - 13 Tooth)
x
x
XS

x
(w)
XV
10 Tooth Straight Spline Shaft w/1410 Flange (3-1-3881)
x
x
x
x
x
XX
x
x
XY
x
x
x
(w)
ZY
DIN 5462 Pump Mounting (Shorter than XY output)
(w) (w)

NOTE: (w) Wet Spline Flange Option

*Must use the W Lube Option on the 267 Series for this Output

**Any 267 Series using a 3 Arrangement Requiring an S.A.E B Output Must use the XQ or AK Output Option

Due to Interference Between the XK Flange and the Pressure Lube Fitting
20
Constant Mesh Ten Bolt Power Take-Offs
267 Series
Constant Mesh (non-shiftable) P.T.O. that is ideal for

applications requiring continuous power
Three speed ratios and ten output options
SuperTorque gears available for 20% higher
intermittent torque ratings
No backlash to adjust
Wet Spline Output options available

267*B
267*G
267*S 267SB
267SG 267SS
SuperTorque
335
300
250 402
360
265
454
407
339 545
488
359
32
29
24
38
34
25
64
57
48
77
69
50
24
21
18
29
26
19
48
43
36
57
51
38
269 Series
Wet Spline design virtually eliminates spline fretting
Increase shaft life by a factor of 10
Two (2) Year Warranty
Standard intermittent torque rating
of 300 Lbs. ft. and 360 Lbs. ft. for SuperTorque gears
P.T.O. output shaft speed of 96% (G ratio) on Allison MD transmissions
Three other speeds to choose from,
see ALL-13 & 14 application pages
Available with an XY output (DIN 5462) flange
Specially designed to Direct Mount a Parker VP1 Series
pump or similar style pump on Allison MD and HD transmissions

269*B
269*D
269*G
269*M 269SB 269SD 269SG
SuperTorque
Standard Output Shaft Size DIN 5462/ISO 14 (XY Output)
335
325
300
265 402 390 360
454
441
407
359 545 529 488
32
31
29
25 38 37 34
64
62
57
50 77 74 69
24
23
21
19 29 28 26
48
46
43
38 57 56 51
269SM
318
431
30
61
23
45
21
Constant Mesh Ten Bolt Power Take-Offs

867 Series
Constant Mesh (non-shiftable) P.T.O. that is ideal

for applications requiring continuous power
Four speed ratios and five output options
Torque ratings from 350 to 575 Lbs. ft.

867*G
867*M
867*R
867*S
867*T
Standard Output Shaft Size 1-1/2" - 10T Spline w/1410 Flange
575
490
415
385
350
780
664
563
522
475
55
47
40
37
33
109
93
79
73
67
41
35
30
27
25
82
70
59
55
50
Approximate Weight:
64 lbs. [29 kg]
897/898/899 Series
Moves the P.T.O. mounting flange to the rear of the transmission
allowing larger pumps and in some cases it will eliminate the
need for a drive shaft
Require less space than current P.T.O.s. Will help clear frame
rails etc.
Torque ratings up to 670 Lbs. ft. allows the use of higher flow and pressure pumps
897 used on Allison 3000/4000 Series Transmissions
898 used on Allison 4000 Series with Integral Oil Cooler
899 used on Allison 4700 Series Transmissions
Wet Spline outputs extends shaft life and eliminates the need to disassemble to frequently grease the
splines
Specifications Chart 897/898/899 Series

897/898/899*A 897/898/899*B 897/898/899*C 897/898/899*D 897/898/899*E 897/898/899*F
670
630
590 550
485
430
908
854
800 746
658
583
64
60
56
52
46
41
120
112 105
92
82
48
45
42
39
35
31
90
84
78
69
61
Approximate Weight:
86 lbs. [39 kg]
NOTE: *Check Application Pages for Actual Torque Ratings
22
P.T.O. Options Chart - Allison World Transmissions

P.T.O. Series
267** 269 867 897/899 898

Lubrication

P
Pressure Lube
x
x
V
Rotated Valve Cap, Wet Spline
W
Wet Spline
x
x
x
x

Shifting

B

D

G

H

K

L

M
Constant Engagement No Shifter
x
x
x
x
x
M
N
S
Air Shift w/P.T.O./Dump Pump Combo Valve
T
Air Shift w/P.T.O./Dump Pump Combo Valve less Kick Out & Spring Return

Output

AB
DIN 120 Flange

x
x
AC
DIN 100 Flange

x
x
AF*
x (w) x (w) (w)
AK*
x (w)

AZ
x

(w)
CS
(w)
CK
(w)
CF
(w)
CZ
(w)
GA
x
GB
x
GE
Rotatable S.A.E. A 2 or 4-Bolt Flange, A Shaft (5/8" - 9 Tooth) (Greaseable) x
GF
x
GH
x
GJ
x
GK
x
GQ
x
GR
x
GY
x
GZ
x
PA

Pump, B Shaft (7/8" - 13 Tooth)
x
PF

Pump, BB Shaft (1.00" - 15 Tooth)
x
RA
x
RB
x
RC
x

RD
x

RE
x

RF
x
RY
x

XD
x
XE
x
XK
(w)
XQ
x

XR
Non-Standard Flange, B Shaft (7/8" - 13 Tooth)
x
XS
x (w) (w)
XV
10 Tooth Straight Spline Shaft w/1410 Flange (3-1-3881)
x
x
x
XX
x
XY
x x (w) x
(w)
ZY
DIN 5462 Pump Mounting (Shorter than XY output)

NOTE: (w) Wet Spline Flange Option

*Must use the W Lube Option on the 267 Series for this Output

**Any 267 Series using a 3 Arrangement Requiring an S.A.E B Output Must use the XQ or AK Output Option

Due to Interference Between the XK Flange and the Pressure Lube Fitting
23
Power Take-Offs for Ford Transmissions

247 Series TorqShift MY2010 and Prior
The only Ford tested tough P.T.O. for the TorqShift transmission
Operates in all gears
Specially matched P.T.O. and pumps for superior work load capabilities
One P.T.O. for 4 x 2 and 4 x 4 applications
One wiring harness for both gas and diesel engines
Speed Ratio of 154% of Engine Speed
Intermittent Torque Rating of 120 Lbs. ft.

Approximate Weight:
247F
1-1/4" Round Shaft w/key
120
163
42
32
20 lbs. [9 kg]
Chelsea CGP-P11 Series Pump Specifications for 4x4 or 4x2 Vehicles (3/4" - 11 Tooth Pump Spline)
Order Code
w/ P.T.O. (3)

16
26
32
37
42
55
61
71
82
87
Chelsea Pump
Model
CGP-P11A016-5FC
CGP-P11A026-5FC
CGP-P11A032-5FC
CGP-P11A037-5FC
CGP-P11A042-5FC
CGP-P11A055-5FC
CGP-P11A061-5FE
CGP-P11A071-5FE
CGP-P11A082-5FE
CGP-P11A087-5FE
Displacement GPM (1) Pump (1) Torque (1)

Pressure PSI
Max Speed RPM Max Pump
in/rev
HP
Lbs.-ft. Intermittent Continuous Pump
Engine (2) Flow GPM
0.37
0.61
0.73
0.85
0.98
1.28
1.40
1.65
1.89
2.01
2.96
4.89
5.85
6.81
7.85
10.25
11.20
13.21
15.13
16.10
6.3
10.3
12.4
14.4
16.6
20.4
21.3
21.2
21.1
21.1
17.8
29.4
35.1
40.9
47.1
57.9
60.6
60.3
60.0
60.0
3990
3990
3990
3990
3990
3480
3410
2900
2465
2320
3625
3625
3625
3625
3625
3410
3265
2755
2395
2250
3500
3400
2500
2500
2350
1850
2750
2350
2100
2000
2273
2208
1623
1623
1526
1201
1786
1526
1364
1299
5.6
9.0
7.9
9.2
10.0
10.3
16.7
16.8
17.2
17.4
Chelsea FGP-17 Series Pump Specifications for 4x2 Vehicles Only (7/8" - 13 Tooth Pump Spline)
Order Code
w/ P.T.O.
Chelsea Pump
Model

Pressure PSI
in/rev
HP
Engine (2) Flow GPM
50
FGP-P17A050-2AN
1.15
9.21
19.5
55.3
3625
3625
66
FGP-P17A066-2AN
1.53
12.25
25.9
73.6
3625
3625
87
FGP-P17A087-2AN
2.01
16.10
34.0
96.7
3625
3625
10
FGP-P17A100-2AN
2.32
18.58
39.3
111.6
3625
3625
14
FGP-P17A137-2AN
3.14
25.15
42.5
120.8
2900
2900
NOTE: FGP-P17 Pumps have a special housing design for mounting to the Ford TorqShift transmission.
3300
3100
3100
3000
2600
2143
2013
2013
1948
1688
16.4
20.5
27.0
30.1
35.3
Chelsea P16 Series Pump Specifications for 4x2 Vehicles Only (7/8" - 13 Tooth Pump Spline)
Order Code
w/ P.T.O.
Chelsea Pump
Model

Pressure PSI
in/rev
HP
Engine (2) Flow GPM
18
P16-180A-2D1
3.51
28.12
36.1
102.5
2200
2200
2500
1623
20
P16-200A-2D1
3.90
31.25
36.5
103.5
2000
2000
2200
1429
(1) GPM & Pump Input HP @ 1200 Engine RPM & 1850 P.T.O. Output Shaft RPM & Continuous Pressure Rating
(2) Max Engine Speed = (Max Pump Speed) / (1.54) for P.T.O. Ratio Increase
(3) For Pump Codes 61, 71, 82 & 87- 45 degree fittings are required to connect hydraulic hoses for clearance. Order Kit number 329667X
24
38.0
37.2
Power Take-Offs for Ford Transmissions

248 Series TorqShift 6 MY2011 and After
Simpler P.T.O. Installation on 4 x 4 and 4 x 2 Models
Torque Rating up to 200 Lbs. ft. of Torque
Large Selection of Pumps provides maximum clearance for your
tough applications
P.T.O. Output Speed of 124% of Engine allows for wide coverage
of applications
Single Hose Connection, one wiring harness and Integrated
Cartridge Valve. Chelsea set these industry standards with the
247 Series and continues these ease of installation features with
the 248 Series

Approximate Weight:
248F
200
271
57
42
25 lbs. [11 kg]
Chelsea CGP-P11 Series Pump Specifications for 4x4 or 4x2 Vehicles (3/4" - 11 Tooth Pump Spline)
Order Code
w/ P.T.O. (3)

16
26
32
37
42
55
61
71
82
87
Chelsea Pump
Model
CGP-P11A016-5GC
CGP-P11A026-5GC
CGP-P11A032-5GC
CGP-P11A037-5GC
CGP-P11A042-5GC
CGP-P11A055-5GC
CGP-P11A061-5GE
CGP-P11A071-5GE
CGP-P11A082-5GE
CGP-P11A087-5GE

Pressure PSI
in/rev
HP
Engine (2) Flow GPM
0.37
0.61
0.73
0.85
0.98
1.28
1.40
1.65
1.89
2.01
1.99
3.27
3.92
4.56
5.26
6.87
7.52
8.86
10.15
10.79
4.2
6.9
8.3
9.6
11.1
13.7
14.3
14.2
14.2
14.2
17.8
29.3
35.1
40.9
47.1
57.9
60.6
60.3
60.0
60.0
3990
3990
3990
3990
3990
3480
3410
2900
2465
2320
3625
3625
3625
3625
3625
3410
3265
2755
2395
2250
3500
3400
2500
2500
2100
1600
2750
2350
2100
2000
2823
2742
2016
2016
1694
1290
2218
1895
1694
1613
5.6
9.0
7.9
9.2
8.9
8.9
16.7
16.8
17.2
17.4
Chelsea PGP-P315 Series Pump Specifications for 4x2 Vehicles Only (3/4" - 11 Tooth Pump Spline)
Order Code
w/ P.T.O.

08
09
11
Chelsea Pump
Model
CGP-P31B081-5AG
CGP-P31B094-5AG
CGP-P31B107-5AG

Pressure PSI
in/rev
HP
Engine (2) Flow GPM
1.86
2.17
2.48
9.98
11.65
13.31
19.2
19.7
19.4
81.4
83.5
82.2
3300
2900
2500
3300
2900
2500
3000
3000
3000
2419
2419
2419
24.2
28.2
32.2
Chelsea P16 Series Pump Specifications for 4x2 Vehicles Only (7/8" - 13 Tooth Pump Spline)
Order Code
w/ P.T.O.
Chelsea Pump
Model

Pressure PSI
in/rev
HP
Engine (2) Flow GPM
15
P16-150A-2D1
2.93
15.73
27.5
116.6
3000
3000
18
P16-180A-2D1
3.51
18.85
24.2
102.5
2200
2200
20
P16-200A-2D1
3.90
20.95
24.4
103.5
2000
2000
(1) GPM & Pump Input HP @ 1000 Engine RPM & 1240 P.T.O. Output Shaft RPM & Continuous Pressure Rating
(2) Max Engine Speed = (Max Pump Speed) / (1.24) for P.T.O. Ratio Increase
(3) For Pump Codes 61, 71, 82 & 87- 45 degree fittings are required to connect hydraulic
hoses for clearance. Order Kit number 329667X
2800
2500
2200
2258
2016
1774
35.5
38.0
37.2
25
P.T.O. Options Chart Ford Transmissions

P.T.O. Series
247

Lubrication
P
Pressure Lube
x

Shifting
B
x
K
12 Volt Electric Overspeed Control
x

Output
AD
S.A.E. A 2-Bolt Flange w/3/4" - 11 Tooth Splined
x
XD
1.25" Dia. Keyed Shaft
x
XE
x
XP
x

Pumps
16
Hyd. Pump 2.9 G.P.M. @1200 R.P.M. w/3/4" - 11 Tooth Spline
x
26
x
32
x
37
x
42
x
55
x
61
x
71
x
82
x
50
Hyd. Pump 9.3 G.P.M. @1200 R.P.M. w/7/8" - 13 Tooth Spline (4 x 2 Only)
x
66
x
87
x
10
x
14
x
18
x
20
x
16
26
32
37
42
55
61
71
82
87
08
09
11
15
18
20

26
248
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Reversible Power Take-Offs 6-Bolt

340 Series
Single low-speed forward and reverse
Removable cover plate for adjusting backlash
Shift options include air and lever
Variety of input gears to cover most applications
6-Bolt Mounting Pad

Approximate Weight:
340*
1-1/4" Round w/key
200
271
19
38
14
28
32 lbs. [15 kg]
352 Series
Offers faster speeds than the 340 Series
Designed with tapered roller bearings for maximum durability
Shift options include wire, lever and air
Same input gears as the 442 Series
6-Bolt Mounting Pad

Approximate Weight:
352*S
1-1/4" Round w/key
140
190
13
27
10
20
37 lbs. [17 kg]
27
Reversible Power Take-Offs 6 & 8-Bolt

863 Series
Designed to fit transmissions with 8-Bolt openings
Capable of up to 500 Lbs. ft. of intermittent torque
Designed for maximum duty reversible applications
such as large-capacity winches
Lever shift is standard

Approximate Weight:
863
500
678
48
95
36
71
96 lbs. [44 kg]
P.T.O. Options Chart Reversible P.T.O.s

P.T.O. Series
352
863
Lubrication
X
Standard
x
x
P
Pressure
x
x
Shifting
A
C
G
V
W
Y
Air
x
Air Shift w/cyl. Location Opposite of Output
x
A Shift, less installation kit
x
Wire
Lever
x
Output
LG
XD
XV
1-1/2" - 10T Spline w/1410 & Self Lube

1-1/4" Round Shaft
x
x
28
340
x
x
x
x
x
x
Rear Mount Power Take-Offs

522 Series
Designed for the ZF Freedomline transmissions (North America) and
ZF, Eaton and Iveco transmissions (Europe)
Direct mount pump flanges available
Installation is quick and easy
Specification Chart 522 Series

522*T
1-1/4" Round w/key
258
350
At 500 R.P.M. of the Output Shaft (HP)
25
49
At 500 R.P.M. of the Output Shaft (Kw)
18
37
Approximate Weight:
35 lbs. [16 kg]
522*V
258
350
25
49
18
37
541 Series
Thrushaft design for Eaton Fuller transmissions
Three speed ratios available
Two shift options available
Direct mount pump flanges or driveshaft output options

541*L
541*M
541*N
Standard Output Shaft Size 1-1/2" - 10T Spline w/1410 Flange
400
350
300
542
475
407
38
33
29
76
67
57
28
25
21
57
50
43
Approximate Weight:
37 lbs. [17 kg]
29
Rear Mount Power Take-Offs

CAT-D
Direct Drive (non-shiftable) P.T.O. for Caterpillar
This is ideal for applications requiring continuous power (125% of engine)
Five Output Options XV (1410 flange) Standard
Up to 800 Lbs. ft. Torque Available (maximum transmission output)
Unique Design Permits Direct Mounting of Flange to the Transmission
Wet Spline Outputs Available which Increases Spline Life by a Factor of 10
Specification Chart CAT-D

Intermittent Torque Rating (Lbs. ft.)*
Approximate Weight:
CAT-D
800
1085
76
152
57
114
8.2 lbs. [3.7 kg]
note: *For the CAT-D, 800 Lbs. ft. Torque rating is for both Intermittent and Continuous, XV Output Only.
CAT-H
Direct Drive (patent # 7,510,064 B2) Powershift P.T.O. for Caterpillar
Output Speed 125% of Engine
Continuous Torque Rating of 335 Lbs. ft.
Five Output Options XD Output Standard
Unique Design for Maximum Clearance
Lightest Weight Direct Drive Powershift Does Not Exceed
Caterpillar Weight Limits
Wet Spline Output Available which Increases Spline Life by a Factor of 10
Specifications Chart CAT-H

Intermittent Torque Rating (Lbs. ft.)*
Approximate Weight:
CAT-H
335
454
32
64
24
48
42.5 lbs. [19.3 kg]
NOTE: * For the CAT-H, 335 Lbs. ft. Torque Rating is for both Intermittent and Continuous, All Output Options.
30
P.T.O. Options Chart Rear Mount P.T.O.s

P.T.O. Series
522
541 CAT-H CAT-D

Mounting Designator
AA
ZF 6S-850
x
AB
Iveco 2845.6
x
AC
ZF/Meritor Freedomliner Astronic
x
AD
ZF 16S151/181/221
x
AM
Eaton FS-4106
x
AT
Fuller

x
AU
Fuller

x
BD
Fuller

x
BJ
Fuller

x
LA
Caterpillar CX Series
x
x
LG
Fuller
x
LH
Fuller
x

Lubrication

X
Standard
x
x
x
x
W
Wet Spline
x
x

Shifting

A
Air
x
x
B
12 Volt Elec/Air
x
D
24 Volt Elec/Air
x
F
ZMTEC Installation, AC Input Gear (Freedomline Transmissions)
x
H
Less Shifter Kit
x

M
Constant Mesh
x
P
12 Volt Elec/Air
x

Q
24 Volt Elec/Air
x

V
Air, Less Installation kit
x

Y
Lever

x

Output

AF**
S.A.E. B 2 or 4-Bolt Flange, 1.00" - 15 Tooth Shaft
x
x
AZ**
S.A.E. B 2 or 4-Bolt Flange, 1.25" - 14 Tooth Shaft
x
x
XD
1-1/4" Round Shaft w/keyway
x

x
XK**
S.A.E. B 2 or 4-Bolt Flange, 7/8" - 13 Tooth Shaft

x
x
x
XS**
S.A.E. C 2 or 4-Bolt Flange, 1.25" - 14 Tooth Shaft
x
XV**

x
x
XX*
x

XY**
x

x
x

NOTE: *Order companion flange (3-1-604) separately

**Also Available as a Wet Spline W Option
31
Dual Output Shaft Power Take-Off 6-Bolt

452 Series
Only dual shaft P.T.O. offered in the industry
Designed for fuel delivery trucks and other applications requiring
two single-rotation shafts
Same gearing as the 442 Series
Both standard and deep mounting options available

Approximate Weight:
452*S
1-1/4" Round w/key
140
190
13
27
10
20
37 lbs. [17 kg]
P.T.O. Options Chart Dual Output Shaft P.T.O.s

P.T.O. Series
452
Lubrication
X
Standard
Shifting
W
Single Shift Wire Control
Output
DD
1-1/4" Round Dual Shafts
32
Asia Pacific Power Take-Offs 6 & 8-Bolt

429 Series
429 Series fits Mitsubishi MO50S5, MO60S6 and
MO70S6 transmissions
Three speed ratios and eight output options
Five shift options
Mounts directly to transmissions, no geared adapter needed

Approximate Weight:
429*Q
1-1/4" Round w/key
175
237
17
33
12
25
37 lbs. [17 kg]
435 Series
435 Series fits the Hino LF06S and LJ06S transmissions
Three speed ratios and seven output options
Mounts directly to transmissions, no geared adapter needed
Cast iron housing for strength and tapered cone bearings for
increased load capacity

435*S
1-1/4" Round w/key
175
237
17
33
12
25
Approximate Weight:
37 lbs. [17 kg]
435*U
175
237
17
33
12
25
33
P.T.O. Options Chart Asia Pacific P.T.O.s

P.T.O. Series
429 435
Lubrication
X
Standard
x
x
Shifting
A
Air
x
x
P
Electric/Air 12V
x
W
Wire
x
Output
AZ
x
GA
x
GB
Rotatable B 4-Bolt Flange, B Shaft (7/8"13 - Tooth) (Greaseable)
x
GH
x
GJ
x
GQ*
x
GR
x
RA
x
x
RB
x
x
RE
x
x
RF
x
x
XD
1-1/4" Round Shaft
x
x
XE
x

XQ*
x
x
XR
1-1/2" - 10T spline w/1410 Series Flange
x
x

34
Split Shaft Power Take-Offs

901 Series
Used on medium duty trucks that have applications
requiring the torque capacity of an 8-Bolt P.T.O.
Provides 100% of input speed
Mount in any orientation with the P.T.O. shaft going
to the front or rear of the truck
Air and Lever shift available, along with three
direct mount flanges

Approximate Weight:
901
1-1/2" - 10T Spline w/1410 Companion Flange
500
678
48
95
36
71
185 lbs. [84 kg]
912 Series
Three 8-Bolt openings that allow you to operate a
variety of auxiliary equipment
Wide variety of 6-Bolt, 8-Bolt, Powershift, and
Reversible P.T.O.s fit the 912 Series
Air and Lever shift available

912
Max Thru Torque Capacity
Lbs. ft.
N.m.
w/Diesel Engine

Automatic Transmission
13,000

17,625

Manual Transmission
12,000
16,270
w/Gas Engine

16,000
21,693

Manual Transmission
15,000
20,337
35
Split Shaft Power Take-Offs

941 Series
Smaller version of the 912 Series with two 6-Bolt openings
Designed for Class 3, 4, 5 and 6 trucks with automatic
transmissions and no P.T.O. opening or trucks requiring
additional P.T.O. openings
Several 6-Bolt and Reversible P.T.O.s will fit on the 941 Series
Special Park Brake Applications available

941
Max Thru Torque Capacity
Lbs. ft.
N.m.
w/Diesel Engine

3,100
4,203

Manual Transmission
2,900
3,932
w/Gas Engine

4,200

5,694

Manual Transmission
3,900
5,288
P.T.O. Options Chart Split Shafts

P.T.O. Series
901
912

Shifting

A
Air
x
x
Y
Lever
x
x

Input-Output Shaft

C
1-3/4" - 10T Spline
x

G
2-3/4" Shaft w/1710 1/2 Rd Yoke

x
H
2-3/4" Shaft w/1810 1/2 Rd Yoke

x
J
Without Flanges

x
K
1410 Series Flange

L
1550 Series Flange

M
2-3/4" Shaft w/1610 Companion Flange

x
P
Output shaft for Spicer 170-4-521-1X

x
S
Output shaft for Spicer 250-4-241-1X

x

P.T.O. Output Shaft

XV
1-1/2" - 10T Spline w/1410 Companion Flange
x

XK
S.A.E. B 2 or 4-Bolt
x

XS
S.A.E. C 4-Bolt
x

XU
S.A.E. C 2-Bolt
x

XX
No P.T.O. Shaft

XX
Two 8-Bolt P.T.O. openings with air shift or three 8-Bolt openings

x
36
941
x
x

x
x
x
Crank Shaft Power Take-Offs

2230U Series
Allows the driver to shift on the go
Electric-over-air for reliable shifting
2230U Series run at 88% of engine speed
Electronic Overspeed Control (E.O.C.) available
to protect driven equipment
Specifications Chart Crankshaft-Driven P.T.O.s

Percent of Engine Speed
Approximate Weight:
2230U
88%
1-1/4" Round w/key
225
305
21
43
16
32
88 lbs. [40 kg]
2442 Series
The economical 2442 Series is a manual shift P.T.O.
Operator must stop the engine before shifting
Available in 7 different speed ratios ranging from
39% to 123% of engine speed
10 shift options available
Specifications Chart Crankshaft-Driven P.T.O.s

2442*F 2442*L 2442*Q 2442*S 2442*U 2442*W
Percent of Engine Speed
39%
50%
54%
74%
89%
104%
250
250
225
170
140
120
339
339
305
230
190
163
24
24
21
16
13
11
48
48
43
32
27
23
18
18
16
12
10
9
36
36
32
24
20
17
2442*X
123%
100
136
10
19
7
14
37
P.T.O. Options Chart Crank Shaft P.T.O.s

P.T.O. Series
2330U
2442
Shifting
A
Air Shift
x
x
H
Less Wire Shift Cover
x
J
24V Electronic Overspeed Control
x
N
12V Electronic Overspeed Control
x
P
12V Electric Over Air w/o Overspeed Control
x
x
S
P.T.O. & Pump Combo Valve
x
V
x
W
Cable Shift
x
X
Less Cable and Knob
x

Output
AA
Special Pump for England
x
AF
x
x
AK
x
AZ
x
GF
x
GH
x
GJ
x
GK
x
GP
x
GQ*
x
GR
x
GY
x
GZ
x
LA
x
LB
x
LC
x
LD
x
LF
x
RA
x
x
RB
x
x
RC
x
RD
x
RE
x
RF
x
RY
x
XD
1-1/4" Round Shaft
x
x
XE
x
XG
Non Standard S.A.E. B 2-Bolt Flange, Non Standard Shaft (3/4" w/3/16" key)
x
XJ
Non Standard S.A.E. A 2-Bolt Flange, Non Standard Shaft (3/4" w/3/16" key)
x
XK
x
x
XQ*
x
XR
Non Standard Flange, B Shaft (7/8" - 13 Tooth)
x
x
XX**
x
XY
x
x

NOTE:
*XQ/GQ same as XK/GK except flange rotated 90

**Order companion (3-1-604) separately
38
Kit-Style Geared Adapters

626 Series
6-Bolt P.T.O. to a 6-Bolt Transmission Opening
Moves the P.T.O. straight out from the transmission
Uses the same input gears as the 442 and 489 Series
Uses the same mounting hardware and spacers used
to mount a 442 Series to a specific application
628 Series
Moves the P.T.O. straight out from the transmission
Uses the same mounting hardware and spacers used
to mount a 489 Series to a specific application
630 Series
Moves the P.T.O. down at a 30 angle, helping to eliminate
interference problems
630-02 used with Eaton UltraShift I-Brake for interference problems
645 Series
Moves the P.T.O. down at a 45 angle, helping to eliminate
interference problems
39
Kit-Style Geared Adapters 626 Series

Gasket Pack & Stud Kit
P.T.O. to Adapter
Adapter Input Gear
P.T.O. Input Gear
Model
Part No.
Helix
No. Spacer
Stud Kit
P.T.O. Pitch Part No.
Helix
No.
Angle
Teeth
Designator
Angle

626*AB
5-P-1001
Spur
19
7-A-140
7170-3X
*AB
5-P-1001 Spur
626*AH
5-P-1004
Spur
22
7-A-140
7170-3X
*AH
5-P-1004 Spur
626*AP
5-P-1006
Left Hand
21
7-A-140
7170-3X
*GX
5-P-1183 Right Hand
626*AR
5-P-1008
Left Hand
21
7-A-187
7170-3X
*GY
5-P-1184 Right Hand
626*AW 5-P-1009
Left Hand
22
7-A-270
7170-4X
*GZ
5-P-1185 Right Hand

626*BG
5-P-1015
Left Hand
23
7-A-140
7170-3X
*HB
5-P-1187 Right Hand
626*BQ
5-P-1023
Left Hand
25
7-A-200
7170-4X
*BP
5-P-1022 Right Hand

626*CB
5-P-1029
Left Hand
25
7-A-140
7170-3X
*HD
5-P-1189 Right Hand
626*CD
5-P-1031
Left Hand
27
7-A-270
7170-4X
*HE
5-P-1190 Right Hand
626*DA
5-P-1037
Spur
23
*DA
5-P-1037 Spur
626*DU
5-P-1050
Left Hand
28
7-A-240
7170-4X
*HH
5-P-1193 Right Hand

626*ED
5-P-1056
Left Hand
34
7-A-240
7170-4X
*HK
5-P-1195 Right Hand
626*ES
5-P-1059
Left Hand
22
7-A-062
*HL
5-P-1196 Right Hand
626*EV
5-P-1060
Spur
40
7-A-300
7170-4X
*EV
5-P-1060 Spur
626*EW 5-P-1061
Left Hand
20
7-A-125
7170-3X
*HM
5-P-1197 Right Hand
626*FC
5-P-1064
Left Hand
26
7-A-165
7170-3X
*HP
5-P-1199 Right Hand

626*HV
5-P-1300
Spur
24
7-A-140 328170-94X
*HV
5-P-1300 Spur
626*HY
5-P-1237
Left Hand
26
7-A-125 328170-94X
*JB
5-P-1244 Right Hand
626*IT KIT ADAPTER
626*JK
5-P-1261
Left Hand
24
7-A-187
7170-3X
*JL
5-P-1262 Right Hand
626*JM
5-P-1263
Left Hand
22
7-A-125
7170-3X
*JN
5-P-1264 Right Hand
626*JU
626*JW
626*KX
5-P-1316
5-P-1319
5-P-1411
Left Hand
Left Hand
Left Hand
25
23
26
7-A-200
7-A-093
7-A-125
7170-4X
7170-3X
328170-94X
*KA
*KB
*KY
5-P-1318
5-P-1321
5-P-1412
Right Hand
Right Hand
Right Hand
No.
Teeth
19
22
21
21
22
23
26
25
27
23
28
34
22
40
20
26
24
26
24
22
25
23
26

Adapter Input Gear
Model Part No. Helix
No.
Angle
628*AB
628*AH
628*AR
628*BG
628*DA
628*DU
628*EV
628*HV
628*IT

P.T.O. to Adapter
No.
Spacer
Stud Kit
Teeth
P.T.O. Pitch
Part No. Helix
Designator Angle
5-P-1001
Spur
19
7-A-140
7170-3X
*AB
5-P-1001
5-P-1004
Spur
22
7-A-165
7170-3X
*AH
5-P-1004
5-P-1008
Left Hand
21
7-A-200
7170-3X
*GY
5-P-1184
5-P-1015
Left Hand
23
7-A-165
7170-3X
*HB
5-P-1187
5-P-1037
Spur
23
328170-76X
*DA
5-P-1037
5-P-1050
Left Hand
28
7-A-270
7170-5X
*HH
5-P-1193
5-P-1060
Spur
40
7-A-300
7170-5X
*EV
5-P-1060
5-P-1300
Spur
24
7-A-140 328170-94X
*HV
5-P-1300
KIT ADAPTER
40
P.T.O. Input Gear
Spur
Spur
Right Hand
Right Hand
Spur
Right Hand
Spur
Spur
No.
Teeth
19
22
21
23
23
28
40
24

Adapter Input Gear
Model
Part No. Helix
No. Angle

P.T.O. to Adapter
No. Spacer
Stud Kit
Teeth
P.T.O. Input Gear

P.T.O. Pitch Part No. Helix
Designator Angle
630*AB
5-P-1001
Spur
19 7-A-140
7170-3X
*AB
630*AH
5-P-1004
Spur
22 7-A-140
7170-3X
*AH
630*AP
5-P-1006
Left Hand
21 7-A-140
7170-3X
*GX
630*AR 5-P-1008
Left Hand
21 7-A-187
7170-3X
*GY
630*BG
5-P-1015
Left Hand
23 7-A-140
7170-3X
*HB

630*BQ
5-P-1023
Left Hand
25 7-A-200
7170-4X
*BP
630*BS
5-P-1025
Left Hand
26 7-A-062
7170-4X
*BR
630*CD
5-P-1031
Left Hand
27 7-A-270
7170-4X
*HE
630*DA
5-P-1037
Spur
23
*DA

630*DU
5-P-1050
Left Hand
28 7-A-240
7170-4X
*HH
630*ED
5-P-1056
Left Hand
34 7-A-240
7170-4X
*HK
630*ES
5-P-1059
Left Hand
22 7-A-062
*HL
630*EV
5-P-1060
Spur
40 7-A-300
7170-4X
*EV
630*EW
5-P-1061
Left Hand
20 7-A-125
7170-3X
*HM

630*FN
5-P-1070
Left Hand
26 7-A-300
7170-4X
*HR
630*HY
5-P-1237
Left Hand
26 7-A-125
7170-1X
*JB
630*HV
5-P-1300
Spur
24 7-A-140
328170-94X
*HV
630*IT KIT ADAPTER

630*JK
5-P-1261
Left Hand
24 7-A-187
7170-3X
*JL
630*JM
5-P-1263
Left Hand
22 7-A-125
7170-3X
*JN
630*JU
5-P-1316
Left Hand
25 7-A-200
7170-4X
*KA
630*JW
5-P-1319
Left Hand
23 7-A-093
7170-3X
*KB
630*KX
5-P-1411
Left Hand
26 7-A-125
328170-94X
*KY
No.
Teeth
5-P-1001
5-P-1004
5-P-1183
5-P-1184
5-P-1187
Spur
Spur
Right Hand
Right Hand
Right Hand
19
22
21
21
23
5-P-1022
5-P-1024
5-P-1190
5-P-1037
Right Hand
Right Hand
Right Hand
Spur
26
26
27
23
5-P-1193
5-P-1195
5-P-1196
5-P-1060
5-P-1197
Right Hand
Right Hand
Right Hand
Spur
Right Hand
28
34
22
40
20
5-P-1201
5-P-1244
5-P-1300
Right Hand
Right Hand
Spur
26
26
24
5-P-1262
5-P-1264
5-P-1318
5-P-1321
5-P-1412
Right Hand
Right Hand
Right Hand
Right Hand
Right Hand
24
22
25
23
26
41

Adapter Input Gear
Model
Part No.
No.
Helix
Angle

P.T.O. to Adapter
No.
Spacer Stud Kit
Teeth
P.T.O. Input Gear

P.T.O. Pitch
Part No.
Designator
Helix
Angle
645*AB
5-P-1001
Spur
19
7-A-140
7170-3X
*AB
5-P-1001
Spur
645*AG
5-P-1003
Spur
22
7-A-140
7170-3X
*AG
5-P-1003
Spur
645*AH
5-P-1004
Spur
22
7-A-140
7170-3X
*AH
5-P-1004
Spur
645*AP
5-P-1006
Left Hand 21
7-A-140
7170-3X
*GX
5-P-1183
Right Hand
645*AR
5-P-1008
Left Hand 21
7-A-187
7170-3X
*GY
5-P-1184
Right Hand
645*AW
5-P-1009
Left Hand 22
7-A-270
7170-4X
*GZ
5-P-1185
Right Hand

645*BQ
5-P-1023
Left Hand 25
7-A-200
7170-4X
*BP
5-P-1022
Right Hand

645*CB
5-P-1029
Left Hand 25
7-A-140
7170-3X
*HD
5-P-1189
Right Hand
645*CD
5-P-1031
Left Hand 27
7-A-270
7170-4X
*HE
5-P-1190
Right Hand
645*DA
5-P-1037
Spur
23

*DA
5-P-1037
Spur
645*DU
5-P-1050
Left Hand 28
7-A-240
7170-4X
*HH
5-P-1193
Right Hand
645*ED
5-P-1056
Left Hand 34
7-A-240
7170-4X
*HK
5-P-1195
Right Hand

645*ES
5-P-1059
Left Hand 22
7-A-062

*HL
5-P-1196
Right Hand
645*EV
5-P-1060
Spur
40
7-A-300
7170-4X
*EV
5-P-1060
Spur
645*EW
5-P-1061
Left Hand 20
7-A-125
7170-3X
*HM
5-P-1197
Right Hand
645*FC
5-P-1064
Left Hand 26
7-A-165
7170-3X
*HP
5-P-1199
Right Hand
645*FN
5-P-1070
Left Hand 26
7-A-300
7170-4X
*HR
5-P-1201
Right Hand

645*GR
5-P-1157
Spur
23
7-A-062
*GR
5-P-1157
Spur
645*HY
5-P-1237
Left Hand 26
7-A-125 328170-94X
*JB
5-P-1244
Right Hand
645*IT KIT ADAPTER

645*HV
5-P-1300
Spur
24
7-A-140 328170-94X
*HV
5-P-1300
Spur
645*JD
5-P-1248
Left Hand 20
7-A-200
7170-3X
*JE
5-P-1249
Right Hand

645*JK
5-P-1261
Left Hand 24
7-A-187
7170-3X
*JL
5-P-1262
Right Hand
645*JM
5-P-1263
Left Hand 22
7-A-125
7170-3X
*JN
5-P-1264
Right Hand
645*JP
5-P-1268
Left Hand 33
7-A-187
7170-3X
*JQ
5-P-1269
Right Hand
645*JS
5-P-1310
Left Hand 20
7-A-062
*JY
5-P-1312
Right Hand
645*JU
5-P-1316
Left Hand 25
7-A-200
7170-4X
*KA
5-P-1318
Right Hand

645*JW
5-P-1319
Left Hand 23
7-A-093
7170-3X
*KB
5-P-1321
Right Hand
645*KJ
5-P-1405
Left Hand 33
328170-94X
*KK
5-P-1406
Right Hand
645*KL
5-P-1407
Left Hand 29
7-A-200
7170-4X
*KM
5-P-1408
Right Hand
645*KN
5-P-1383
Left Hand 27
7-A-270
7170-4X
*KP
5-P-1384
Right Hand
645*KX
5-P-1411
Left Hand 26
7-A-125 328170-94X
*KY
5-P-1412
Right Hand
42
No.
Teeth
19
22
22
21
21
22
26
25
27
23
28
34
22
40
20
26
26
23
26
24
20
24
22
33
20
25
23
33
29
27
26
Shifter Options
Wire (Cable) Shift

Chelsea wire shift system is economical, easy to install and easy to use
Features a vinyl-covered stainless steel push/pull cable for maximum corrosion protection
Standard cable length is 10 feet
15, 20, 25, and 30 foot long cables available
Air Shift

Simple to install and easy to shift

Chelsea Air shift covers feature heavy-duty seals and precisely machined pistons
Shifter shaft cover provides protection against system contamination
The DOT-required pressure protection valve is included with this option
Electric-Over-Air Shift (12 and 24 Volt)

Available for both mechanically shifted (i.e. 442 Series) and air-shifted Powershift (i.e. 230/231 Series)
Power Take-Offs
Shift option for both types of P.T.O.s features a recessed rocker switch and solenoid combination to air

actuates Power Take-Offs
For mechanically shifted P.T.O.s, when the rocker switch is pressed, the solenoid shifts and allows air to

move the shift rod and fork into the engaged position
On air-actuated Powershift units, air is used to compress a clutch pack which in turn engages the P.T.O. and
eliminates clash shifting
The DOT-required pressure protection valve is included with this option
Electric-Over-Hydraulic Shift (12 and 24 Volt)

This option is used for Chelsea Powershift Power Take-Offs mounted to automatic transmissions
Pressurized fluid from the transmission main pressure port is used to compress the P.T.O. clutch pack
Allows for clash free shifting
Electric Overspeed Control (E.O.C.)

This state of the art Chelsea shift option is used with Powershift P.T.O.s
Protects auxiliary power equipment (P.T.O.s, pumps, and cylinders) by keeping the P.T.O. speed within
owner-determined operational limits
Unit combines solid-state components in a tamper-resistant housing for true reliability
One unit for both 12 Volt and 24 Volt applications
Easy-to-read backlit LED buttons
P.T.O./Dump Pump Combo Valve

Designed to make P.T.O./Dump Pump air shift applications easier

Compact design features a safety interlock to prevent accidental P.T.O. engagement
Controls are easy to operate
Ideal for use in systems with Chelsea dump pumps, wet line reservoirs and P.T.O.s
43
Shifter Options P.T.O./Dump Pump Combo Valves

Available for Hotshift & Mechanical Shift P.T.O.s
P.T.O./Dump Pump Combo Valve Features

Part
Number
P.T.O.
Kick Out
Spring Return to
Neutral on Dump
Valve Control
Manual Return to
Neutral on Dump Safety Lock Detent Lock Smooth
Valve
on P.T.O.
on Neutral Descent
LED
Light
Air Shift P.T.O.s
329214X & -2X

x
x
329316X & -2X
x
329358X
x
x
x
x
x
x
x
x
x
x
x
x
x
x
329214-1X
x
x
329216-1X
x
x
x
x
x
x
x
x
x
Hydraulic Shift P.T.O.s
Order
Code
P.T.O.
Models
Chelsea
Part No.
Installation
Kit
Description
Air Shift P.T.O.s
Hoist-P.T.O. control valve that allows a smooth

descent of the body in the lower position.

S
442/489, 660/680
329214X
328388-65X Features automatic disengagement of the P.T.O.

in lower. Lever on the control valve returns to

S
230/231, 236/238
329214-2X 328388-89X neutral from the raise position when released

(dead mans handle).

T
442/489, 660/680
329316X
328388-72X Hoist-P.T.O. control valve that allows a smooth


T
230/231, 236/238
329316-2X 328388-90X Requires manual disengagement of the P.T.O.

in lower.

U
442/489, 660/680
329358X
328388-79X descent of the body in the lower position.
Features automatic disengagement of the P.T.O.

in lower.
Hydraulic Shift P.T.O.s

S
277/278
329214-1X 328388-85X

S
270/271
329214-1X 328388-87X

T
277/278
329216-1X 328388-86X

T
270/271
329216-1X 328388-88X


Features automatic disengagement of the P.T.O.
in lower. Lever on the control valve returns to
neutral from the raise position when released
(dead mans handle).
Requires manual disengagement of the P.T.O.
in lower.
Dump Pumps General Specifications

Pump
Gear
GPM (US)
Cubic Inch
Horsepower Input
Maximum
Maximum

Width
at 1000 R.P.M.
Displacement (at 2000 PSI) 1000 R.P.M. Pressure
Speed
C101/102-20
C101/102-25
G101/102-1-0.7
G101/102-1-1.5
G101/102-1-2.0
44
2.000"
2.500"
.750"
1.500"
2.000"
22.0
27.6
6.4
12.8
17.0
5.10
6.38
1.48
2.96
3.94
25.6
31.0
6.2
13.7
18.8
2500
2500
2500
2500
2500
2400 R.P.M.
2400 R.P.M.
2400 R.P.M.
2400 R.P.M.
2400 R.P.M.
Notes
45
Notes
46
Offer of Sale
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors.
This offer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyers order for any such
items, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute
acceptance of this offer.
1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Sellers
products are subject to and shall be governed exclusively by the terms
and conditions stated herein. Buyers acceptance of any offer to sell is
limited to these terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in
any acceptance of an offer by Seller, are hereby objected to. No such
additional, different or inconsistent terms and conditions shall become
part of the contract between Buyer and Seller unless expressly accepted
in writing by Seller. Sellers acceptance of any offer to purchase by Buyer
is expressly conditional upon Buyers assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent
with those contained in Buyers offer, Acceptance of Sellers products
shall in all events constitute such assent.
2. Payment: Payment shall be made by Buyer net 30 days from the date
of delivery of the items purchased hereunder. Amounts not timely paid
shall bear interest at the maximum rate permitted by law for each month
or portion thereof that the Buyer is late in making payment. Any claims
by Buyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after Buyers receipt
of the shipment.
3. Delivery: Unless otherwise provided on the face hereof, delivery shall
be made F.O.B. Sellers plant. Regardless of the method of delivery, however, risk of loss shall pass to Buyer upon Sellers delivery to a carrier.
Any delivery dates shown are approximate only and Seller shall have
no liability for any delays in delivery.
4. Warranty: Seller warrants that certain Products, namely PTOs, SEMs,
and Wet Line Kits sold hereunder shall be free from defects in material
or workmanship for a period of twenty four months from the date of
delivery to Buyer. Seller warrants that certain Products namely Pumps,
and Hydraulic Accessories shall be free from defects in material or
workmanship for a period of eighteen months from the date of delivery
to the Buyer. The prices charged for Seller's products are based upon
the exclusive limited warranty stated above, and upon the following disclaimer: DISCLAIMER OF WARRANTY:THIS WARRANTY COMPRISES
THE SOLE AND ENTIRE WARRANTY PERTAINING TO PRODUCTS
PROVIDED HEREUNDER. SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
5. Limitation Of Remedy: SELLERS LIABILITY ARISING FROM OR IN
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT
OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID
BY BUYER, AT SELLERS SOLE OPTION. IN NO EVENT SHALL
SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM
OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS
SOLD HEREUNDER,WHETHER ALLEGEDTO ARISE FROM BREACH
OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT,
INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO
WARN OR STRICT LIABILITY.
6. Changes, Reschedules and Cancellations: Buyer may request to
modify the designs or specifications for the items sold hereunder as well
as the quantities and delivery dates thereof, or may request to cancel
all or part of this order, however, no such requested modification or
cancellation shall become part of the contract between Buyer and Seller
unless accepted by Seller in a written amendment to this Agreement.
Acceptance of any such requested modification or cancellation shall be
at Sellers discretion, and shall be upon such terms and conditions as
Seller may require.
7. Special Tooling: A tooling charge may be imposed for any special
tooling, including without limitation, dies, fixtures, molds and patterns,
acquired to manufacture items sold pursuant to this contract. Such special
tooling shall be and remain Sellers property notwithstanding payment
of any charges by Buyer. In no event will Buyer acquire any interest in
apparatus belonging to Seller which is utilized in the manufacture of the
items sold hereunder, even if such apparatus has been specially converted
or adapted for such manufacture and notwithstanding any charges paid
by Buyer. Unless otherwise agreed, Seller shall have the right to alter,
discard or otherwise dispose of any special tooling or other property in
its sole discretion at any time.
8. Buyers Property: Any designs, tools, patterns, materials, drawings,

confidential information or equipment furnished by Buyer or any other
items which become Buyers property, may be considered obsolete and
may be destroyed by Seller after two (2) consecutive years have elapsed
without Buyer placing an order for the items which are manufactured using
such property, Seller shall not be responsible for any loss or damage to
such property while it is in Sellers possession or control.
9. Taxes: Unless otherwise indicated on the face hereof, all prices and
charges are exclusive of excise, sales, use, property, occupational
or like taxes which may be imposed by any taxing authority upon the
manufacture, sale or delivery of the items sold hereunder. If any such
taxes must be paid by Seller or if Seller is liable for the collection of
such tax, the amount thereof shall be in addition to the amounts for the
items sold. Buyer agrees to pay all such taxes or to reimburse Seller
therefore upon receipt of its invoice. If Buyer claims exemption from
any sales, use or other tax imposed by any taxing authority, Buyer shall
save Seller harmless from and against any such tax, together with any
interest or penalties thereon which may be assessed if the items are
held to be taxable.
10. Indemnity For Infringement of Intellectual Property Rights: Seller
shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in
this Part 10. Seller will defend and indemnify Buyer against allegations
of infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress
and trade secrets (hereinafter Intellectual Property Rights). Seller will
defend at its expense and will pay the cost of any settlement or damages
awarded in an action brought against Buyer based on an allegation that
an item sold pursuant to this contract infringes the Intellectual Property
Rights of a third party. Sellers obligation to defend and indemnify Buyer
is contingent on Buyer notifying Seller within ten (10) days after Buyer
becomes aware of such allegations of infringement, and Seller having
sole control over the defense of any allegations or actions including all
negotiations for settlement or compromise. If an item sold hereunder
is subject to a claim that it infringes the Intellectual Property Rights of
a third party, Seller may, at its sole expense and option, procure for
Buyer the right to continue using said item, replace or modify said item
so as to make it noninfringing, or offer to accept return of said item and
return the purchase price less a reasonable allowance for depreciation.
Notwithstanding the foregoing, Seller shall have no liability for claims
of infringement based on information provided by Buyer, or directed to
items delivered hereunder for which the designs are specified in whole
or part by Buyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. The foregoing
provisions of this Part 10 shall constitute Sellers sole and exclusive
liability and Buyers sole and exclusive remedy for infringement of Intellectual Property Rights.
If a claim is based on information provided by Buyer or if the design for an
item delivered hereunder is specified in whole or in part by Buyer, Buyer
shall defend and indemnify Seller for all costs, expenses or judgments
resulting from any claim that such item infringes any patent, trademark,
copyright, trade dress, trade secret or any similar right.
11. Force Majeure: Seller does not assume the risk of and shall not be
liable for delay or failure to perform any of Sellers obligations by reason
of circumstances beyond the reasonable control of Seller (hereinafter
Events of Force Majeure). Events of Force Majeure shall include without
limitation, accidents, acts of God, strikes or labor disputes, acts, laws,
rules or regulations of any government or government agency, fires,
floods, delays or failures in delivery of carriers or suppliers, shortages
of materials and any other cause beyond Sellers control.
12. Entire Agreement/Governing Law: The terms and conditions set
forth herein, together with any amendments, modifications and any
different terms or conditions expressly accepted by Seller in writing,
shall constitute the entire Agreement concerning the items sold, and
there are no oral or other representations or agreements which pertain
there/to. This Agreement shall be governed in all respects by the law
of the State of Ohio. No actions arising out of the sale of the items sold
hereunder or this Agreement may be brought by either party more than
two (2) years after the cause of action accrues.

10/09-P
47
Sales Offices Worldwide

North America
Canada
Parker Hannifin Canada
160 Chisholm Drive
Milton, Ontario L9T 3G9
Tel: (905) 693-3000
Fax: (905) 867-0789
Mexico
Parker Hannifin Corporation
Via de Ferrocarril a
Matamoros 730
Apodaca, N.L Mexico
Tel: (011) 52 81 8156 6000
Fax: (011) 52 80 8156 6076
South Africa
Parker Hannifin Pty Ltd

Sales Company South Africa
10 Berne Avenue
Aeroport
Kempton Park
SOUTH AFRICA
1620
Tel: +9610700
Fax: +3927213
South America
Latin America
Pan American Div

7400 N W 19th St Suite A
Miami, FL 33126
UNITED STATES
Tel: (305) 470-8800
Fax: (305) 470-8809
Europe
Great Britain
Parker Chelsea Products
Parker Hannifin Limited
Bldg 93, Vantage Point.,
Pensnett Estate,
Kingswinford, W Midlands, DY6
7FR
UNITED KINGDOM
Tel: (011) 44 1384 282777
Fax: (011) 44 1384 401851
South Asia
Chelsea Products
Parker Hannifin India Pvt. Ltd.
TTC Industrial Area, Mahape
Navi Mumbai - 400 709, India
Tel: +91 22 6513 7081 - 85

ext 260
Fax: +91 22 2768 6841
Brazil
Parker Hannifin Industria e
Comercio Ltda.
Hydraulics Division
Av Frederico Ritter 1100
District Industrial
94930-000 Cachoeirinha
RS, Brazil
Tel: 55 51 3470 9131
Fax: 55 51 3470 6090
Asia Pacific
Australia
305 Frankston-Dandenong Road
Dandenong South, Victoria 3175
Tel: 61 3 9768-5555
Fax: 61 3 9768-5556
Australia
Parker Hannifin (Australia)
Pty. Ltd.
9 Carrington Road
Castle Hill
New South Waltes, 2154
Tel: 61 2 9842-5812
Fax: 61 2 9842-5826
Parker Hannifin Singapore Pte
No 11 Fourth Chin Bee Rd
Jurong Town
SINGAPORE
619702
Tel: (+68) 87 -6300
Fax: (+62) 65 -5125
Parker Hannifin Hong Kong Ltd
8/f, Kin Yip Plaza
9 Cheung Yee Street
Cheung Sha Wan Kowloon
HONG KONG
Tel: (+02) 428-8008
Fax: (+02) 480-4256
Parker Hannifin Motion & Control
(Shanghai) Co., Ltd.
280 Yunqiao Road, Jinqiao Export
Processing Zone
Shanghai 201206, P. R. China
Tel: (+86) 21 6455 2002
Fax: (+86) 21 5463 1250
Parker Hannifin Beijing
Suite B9-B11
21/F Hanwei Plaza
No. 7 Guanghua Road
Chaoyang District
Beijing 100004, China
Tel: (+86) 10 6561 0520 - 5
Fax: (+86) 10 6561 0526 - 7
Supersedes HY25-0066/US January 2008
Parker Hannifin Corporation

Chelsea Products Division
8225 Hacks Cross Road
Olive Branch, MS 38654, USA
Phone: (662) 895-1011
Fax: (662) 890-5379
www.parker.com/chelsea
HY25-0066-B1/US 3,000 GLI January 2011
Your Local Authorized Parker Distributor

Catalogo Trasnfer

Uploaded by

Copyright:

Available Formats

Catalogo Trasnfer

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogo Trasnfer

Uploaded by

Copyright:

Available Formats

Chelsea Power Take-Offs

P.T.O. General Information

WARNING User Responsibility

Copyright 2011, Parker Hannifin Corporation, All Rights Reserved

Chelsea P.T.O. Series Information

Mechanical Six Bolt Power Take-Offs

Specifications Chart 100 Series

Specifications Chart 221 Series

Mechanical Six Bolt Power Take-Offs

Specifications Chart 290 Series

Specifications Chart 442 Series

Mechanical Six Bolt Power Take-Offs

Specifications Chart 447 Series

Specifications Chart 660 Series

*Above 1500 R.P.M.: Call for Approval

P.T.O. Options Chart 6-Bolt P.T.O.s

NOTE: (w) = Available as a Wet Spline Output

Check the current price book for available options.

100 221 290 442 447 660

P.T.O. Options Chart 6-Bolt P.T.O.s

100 221 290 442 447 660

NOTE: (w) = Available as a Wet Spline Output

Check the current price book for available options.

Mechanical Eight Bolt Power Take-Offs

Only Single gear 8-Bolt P.T.O. in the industry

Specifications Chart 812 Series

Specifications Chart 489 Series

Mechanical Eight Bolt Power Take-Offs

Specifications Chart 680 Series

*Above 1500 R.P.M.: Call for Approval

Specifications Chart 823 Series

Mechanical Eight Bolt Power Take-Offs

Specifications Chart 880 Series

P.T.O. Options Chart 8-Bolt P.T.O.s

NOTE: *XQ/GQ same as XK/GK except flange rotated 90

Check the current price book for available options.

Continued on Next Page

P.T.O. Options Chart 8-Bolt P.T.O.s

Check the current price book for available options.

Series Specifications Chart 230/231 Series

Series Specifications Chart 236 Series

Series Specifications Chart 238 Series

Series Specifications Chart 243 Series

Series Specifications Chart 252 Series

Series Specifications Chart 270/271 Series

Series Specifications Chart 800 Series

Series Specifications Chart 852 Series

Powershift (Shift on the Go) Power Take-Offs

Series Specifications Chart 885 Series

P.T.O. Options Chart Powershift 6 & 8-Bolt P.T.O.s

Check the current price book for available options.

P.T.O. Options Chart Powershift 6 & 8-Bolt P.T.O.s

252 270/271 800

Check the current price book for available options.

Powershift (Shift on the Go) Ten Bolt Power Take-Offs

Specifications Chart 277 Series

277SD 277SG 277SM 277SS

Specifications Chart 278 Series

Powershift (Shift on the Go) Ten Bolt Power Take-Offs