Scribd Logo
Upload

Welcome to Scribd!

  • 293 views

    Interface Generac G Panel Modbus

    Uploaded by

    balajiboss005
    This document lists alarms and analog parameters available for monitoring on a Generac G Panel system using MODBUS communications. It includes parameters for generator operation, ATS position, load monitoring, fuel level, battery voltage, and more. The document notes that optional accessories may be required to access all parameters and that a technician is recommended for installation and calibration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Interface Generac G Panel Modbus

    Uploaded by

    balajiboss005
    293 views1 page
    This document lists alarms and analog parameters available for monitoring on a Generac G Panel system using MODBUS communications. It includes parameters for generator operation, ATS position, load monitoring, fuel level, battery voltage, and more. The document notes that optional accessories may be required to access all parameters and that a technician is recommended for installation and calibration.

    Original Description:

    gen

    Original Title

    Interface Generac g Panel Modbus

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document lists alarms and analog parameters available for monitoring on a Generac G Panel system using MODBUS communications. It includes parameters for generator operation, ATS position, load monitoring, fuel level, battery voltage, and more. The document notes that optional accessories may be required to access all parameters and that a technician is recommended for installation and calibration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    293 views1 page

    Interface Generac G Panel Modbus

    Uploaded by

    balajiboss005
    This document lists alarms and analog parameters available for monitoring on a Generac G Panel system using MODBUS communications. It includes parameters for generator operation, ATS position, load monitoring, fuel level, battery voltage, and more. The document notes that optional accessories may be required to access all parameters and that a technician is recommended for installation and calibration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    GENERAC G PANEL

    MODBUS
    Alarms

    Alarms
    Remote Start Relay
    Inactive

    Analog Parameters

    Analog Parameters

    Oil Temp

    HTS Backup Battery Volts4

    Generator Running

    Spare Relay Open

    Coolant Temp

    On Generator Power

    Modbus Fault

    Oil Pressure

    Supply Voltage
    Diesel Fuel Level

    On Line Power

    Failed to Report Data

    Coolant Level

    ATS Load kW

    Not In Auto

    ATS Position

    Fuel Level

    ATS Load kWh

    Charger Fail

    Battery Charge Current

    ATS Load kVAR

    Gen Batt Volts High Alarm

    Battery Volts

    ATS Load kVA

    Gen Batt Volts Low Alarm

    Generator Phase A Current

    ATS Load Power Factor

    Coolant Temp High Alarm

    Generator Phase B Current

    ATS Load Average kW

    Coolant Temp Low Alarm

    Generator Phase C Current

    ATS Load Minimum kW

    Coolant Temp High Shutdown

    Generator Current Average

    Pre-Low Oil Pressure Alarm

    Generator Phase AB Volts

    Low Oil Pressure Shutdown


    Emergency Stop Shutdown
    Active

    Generator Phase BC Volts

    ATS Load Maximum kW


    ATS Load Voltage Line
    Line
    ATS Load Voltage Line
    Neutral

    Generator Phase CA Volts

    ATS Load Average Amps

    Over Crank Shutdown

    Generator Average Volts

    Over Speed Shutdown

    Generator Power

    Gen Set Shutdown

    Generator Power Factor

    Low Fuel Level

    Generator Frequency

    Rupture Basin Alarm

    RPM

    Low Coolant Level Shutdown

    Engine Hours

    On Utility Power

    Alarm Count

    On Gen Power

    ATS Utility Average Volts4

    ATS Ready4

    ATS Utility Average Amps4

    System Ready

    All Alarms & Analog Parameters noted above are only available if so configured at Generator and ATS control panel.
    It is recommended that a technician with communications experience be utilized to install and calibrate any optional OMN accessories.
    ATS Position Alarm requires an ATS with available position contacts if information not available through existing Controls. Customer to provide
    materials and labor to install wiring between OMN Monitor and ATS. Please note ATS Position monitoring request at time of order.
    ATS Load Analog Parameters require optional Power Meter Kit (Modbus) installed on load side of ATS if information not available through existing
    Controls. Customer to provide materials and labor to install wiring between OMN Monitor and Power Meter Kit. See OMN Power Meter Kit Spec Sheet
    for more details. Please note that Power Meter Kit can be installed in other locations other than load side of ATS.
    Fuel Level Analog Parameter requires optional Fuel Level Kit (Analog) if information not available through existing Controls. Customer to provide
    material and labor to install wiring between monitor and Fuel Level Kit. Please note depth of tank to ensure correct gauge is ordered. See OMN Fuel
    Level Kit Spec Sheet for more details.
    4

    Alarm and Analog Parameters available when compatible Generac transfer switch is utilized.

    www.omnimetrix.net [email protected]
    4295 Hamilton Mill Road, Suite 100 Buford, GA 30518 770-209-0012
    An Acorn Energy Company (NASDAQ:ACFN) www.acornenergy.com

    IF-005 Rev 4
    July 2013

    You might also like