2010 Mazda6 OM PDF

Mazda6_8AS3-EA-09E_Edition1 Page1
Wednesday, May 13 2009 2:22 PM
Form No.8AS3-EA-09E
Form No.8AS3-EA-09E
A Word to Mazda Owners

Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete
customer satisfaction in mind.
To help ensure enjoyable and trouble-free operation of your Mazda, read this manual
carefully and follow its recommendations.
An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is
necessary, that's the place to go.
Our nationwide network of Mazda professionals is dedicated to providing you with the best
possible service.
We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure
and in your full satisfaction with your Mazda product.
Mazda North American Operations
Important Notes About This Manual
Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should you
resell the vehicle, leave this manual with it for the next owner.
All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal at
Mazda, we reserve the right to make changes in specifications at any time without notice and without obligation.
Event Data Recorder
This vehicle is equipped with an event data recorder. In the event of a crash, this device records data related to
vehicle dynamics and safety systems for a short period of time. These data can help provide a better
understanding of the circumstances in which crashes and injuries occur and lead to the designing of safer
vehicles.
Air Conditioning and the Environment
Your Mazda's genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not to
damage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized Mazda
Dealer.
Perchlorate
Certain components of this vehicle such as [air bag modules, seat belt pretensioners, lithium batteries, ...] may
contain Perchlorate Material Special handling may apply for service or vehicle end of life disposal. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Please be aware that this manual applies to all models, equipment and options. As a result, you may find
some explanations for equipment not installed on your vehicle.
2009 Mazda North American Operations

Printed in U.S.A. (Print1)
Form No.8AS3-EA-09E
How to Use This Manual

We want to help you get the most driving
pleasure from your vehicle. Your owner's
manual, when read from cover to cover,
can do that in many ways.
Illustrations complement the words of the
manual to best explain how to enjoy your
Mazda. By reading your manual, you can
find out about the features, important
safety information, and driving under
various road conditions.
The symbol below in this manual means
Do not do this or Do not let this
happen.
Index: A good place to start is the Index,

an alphabetical listing of all information
in your manual.
You'll find several WARNINGs,
CAUTIONs, and NOTEs in the manual.
WARNING
A WARNING indicates a situation in
which serious injury or death could
result if the warning is ignored.
CAUTION
A CAUTION indicates a situation in
which bodily injury or damage to
your vehicle, or both, could result if
the caution is ignored.
Form No.8AS3-EA-09E
NOTE
A NOTE provides information and sometimes
suggests how to make better use of your
vehicle.
The symbol below, located on some parts

of the vehicle, indicates that this manual
contains information related to the part.
Please refer to the manual for a detailed
explanation.
Table of Contents
Your Vehicle at a Glance
Interior, exterior views and part identification of your Mazda.
Essential Safety Equipment

Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Knowing Your Mazda

Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
Before Driving Your Mazda

Important information about driving your Mazda.
Driving Your Mazda

Explanation of instruments and controls.
Interior Comfort
Use of various features for drive comfort, including air-conditioning and audio
system.
In Case of an Emergency
Helpful information on what to do in an emergency.
Maintenance and Care

How to keep your Mazda in top condition.
Customer Information and Reporting Safety Defects

Important consumer information including warranties and add-on equipment.
Specifications
Technical information about your Mazda.
Index
Form No.8AS3-EA-09E
1
2
3
4
5
6
7
8
9
10
11
Form No.8AS3-EA-09E

Interior, exterior views and part identification of your Mazda.
Interior Overview ..........................................................................

Interior Equipment (View A) ....................................................
Interior Equipment (View B) ....................................................
Interior Equipment (View C) ....................................................
1-2
1-2
1-3
1-4
Exterior Overview ......................................................................... 1-5

Front .......................................................................................... 1-5
Rear ........................................................................................... 1-6
1-1
Form No.8AS3-EA-09E
Interior Overview
Interior Equipment (View A)
Door-lock knob .................................................................................................. page 3-33

Power door lock switch ..................................................................................... page 3-33
Headlight leveling switch .................................................................................. page 5-62
TCS-OFF switch ................................................................................................ page 5-23
DSC OFF switch ............................................................................................... page 5-25
BSM OFF switch ............................................................................................... page 5-36
Lighting control ................................................................................................. page 5-60
Turn and lane-change signals ............................................................................ page 5-63
Instrument cluster .............................................................................................. page 5-38
Wiper and washer lever ..................................................................................... page 5-64
Lock release lever .............................................................................................. page 3-63
Trunk release button .......................................................................................... page 3-36
Outside mirror switch ........................................................................................ page 3-63
Power window switches .................................................................................... page 3-40
Power window lock switch ................................................................................ page 3-43
1-2
The equipment and installation position varies by vehicle
Form No.8AS3-EA-09E
Interior Overview
Interior Equipment (View B)
Audio control switches ...................................................................................... page 6-81

SRS air bags ...................................................................................................... page 2-41
Cruise control switches ...................................................................................... page 5-19
Navigation system (if equipped) .......................................... Refer to the separate manual
Hazard warning flasher switch .......................................................................... page 5-70
Climate control system ........................................................................................ page 6-2
MT shift lever .................................................................................................... page 5-10
AT shift lever ...................................................................................................... page 5-12
Push button start ................................................................................................ page 3-10
Seat warmer switches ........................................................................................ page 2-13
Hood release handle .......................................................................................... page 3-48
Storage pocket ................................................................................................. page 6-151
Audio system ..................................................................................................... page 6-16
Multi information display .................................................................................. page 6-57
Form No.8AS3-EA-09E
1-3
Interior Overview
Interior Equipment (View C)
SRS air bags ...................................................................................................... page 2-41

Seat belts ............................................................................................................ page 2-15
Remote fuel-filler lid release ............................................................................. page 3-47
Bottle holder .................................................................................................... page 6-150
Vanity mirror .................................................................................................... page 6-142
Overhead lights ................................................................................................ page 6-143
Rearview mirror ................................................................................................. page 3-64
Sunvisor ........................................................................................................... page 6-142
Accessory sockets ............................................................................................ page 6-154
Front seats ............................................................................................................ page 2-2
Parking brake ....................................................................................................... page 5-6
Cup holders ...................................................................................................... page 6-149
Center console ................................................................................................. page 6-152
Rear seat ............................................................................................................ page 2-10
1-4
Form No.8AS3-EA-09E
Exterior Overview
Front
Hood .................................................................................................................. page 3-48

Windshield wiper blades .................................................................................... page 8-28
Moonroof ........................................................................................................... page 3-49
Door lock ........................................................................................................... page 3-32
Fuel-filler lid ...................................................................................................... page 3-47
Tires ................................................................................................................... page 8-32
Light bulbs ......................................................................................................... page 8-37
Form No.8AS3-EA-09E
1-5
Exterior Overview
Rear
Trunk lid ............................................................................................................ page 3-35

Rear window antenna ........................................................................................ page 6-16
Child safety lock ................................................................................................ page 3-35
Outside mirror .................................................................................................... page 3-63
Tires ................................................................................................................... page 8-32
Light bulbs ......................................................................................................... page 8-37
1-6
Form No.8AS3-EA-09E

Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Seats ............................................................................................... 2-2

Front Seats (Manually Operated Seats) ..................................... 2-2
Front Seats (Electrically Operated Seats) .................................. 2-4
Rear Seat ................................................................................. 2-10
Head Restraints ....................................................................... 2-12
Seat Warmer ......................................................................... 2-13
Seat Belt Systems ........................................................................
Seat Belt Precautions ..............................................................
Seat Belt ..................................................................................
Front Seat Belt Pretensioner and Load Limiting Systems .......
Seat Belt Extender ...................................................................
Seat Belt Warning Light/Beep ................................................
2-15
2-15
2-19
2-21
2-24
2-25
Child Restraint ............................................................................

Child Restraint Precautions .....................................................
Installing Child-Restraint Systems ..........................................
LATCH Child-Restraint Systems ............................................
2-27
2-27
2-31
2-37
SRS Air Bags ...............................................................................

Supplemental Restraint System (SRS) Precautions ................
Supplemental Restraint System Components .........................
How the SRS Air Bags Work ..................................................
SRS Air Bag Deployment Criteria ..........................................
Limitations to SRS Air Bag ....................................................
Driver and Front Passenger Occupant Classification
System ..................................................................................
Monitoring and Maintenance ..................................................
2-41
2-41
2-45
2-46
2-50
2-51
Some models.
Form No.8AS3-EA-09E
2-53
2-58
2-1
Seats
Front Seats (Manually
Operated Seats)
WARNING
Do not modify or replace the front
seats:
Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front seats contain air bag
components essential to the
supplemental restraint system. Such
modifications could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
Do not drive with damaged front seats:
Driving with damaged front seats is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag
components. If there was a
subsequent collision, an air bag may
not deploy which could lead to
injuries. Always have an Authorized
Mazda Dealer inspect the front seats,
front seat belt pretensioners and air
bags after a collision.
Make sure the adjustable components

of a seat are locked in place:
Adjustable seats and seatbacks that
are not securely locked are
dangerous. In a sudden stop or
collision, the seat or seatback could
move, causing injury. Make sure the
adjustable components of the seat
are locked in place by attempting to
slide the seat forward and backward
and rocking the seatback.
qSeat Slide
WARNING
Adjust the driver's seat only when the
vehicle is stopped:
Adjusting the driver's seat while the
vehicle is moving is dangerous. The
driver could lose control of the vehicle
and have an accident.
To move a seat forward or backward, raise
the lever and slide the seat to the desired
position and release the lever.
Make sure the lever returns to its original

position and the seat is locked in place by
attempting to push it forward and
backward.
2-2
Form No.8AS3-EA-09E
Seats
qSeat Recline
WARNING
Do not drive with either front seat
reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you do not get the full
protection from seat belts. During
sudden braking or a collision, you
can slide under the lap belt and
suffer serious internal injuries. For
maximum protection, sit well back
and upright.
Always sit in the passenger seat
properly with the seatback upright and
feet on the floor (With Driver and Front
Passenger Occupant Classification
System):
Your front passenger seat has weight
sensors, sitting in the front passenger
seat improperly out of position or
with the seatback reclined too far
while the vehicle is moving is
dangerous as it can take off weight
from the seat bottom and affect the
weight determination of the front
passenger sensing system. As a result
the front passenger will not have the
supplementary protection of the air
bag and seat belt pretensioner, which
could result in serious injury. Always
sit upright against the seatback with
your feet on the floor.
Do not drive with the seatback

unlocked:
All of the seatbacks play an
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
occupants in a sudden stop or
collision, resulting in severe injury.
After adjusting the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Make sure the lever returns to its original

position and the seatback is locked in
place by attempting to push it forward and
backward.
2-3
Form No.8AS3-EA-09E
Seats
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
seatback with your other hand while
operating the lever. If the seatback is
not supported, it will flip forward
suddenly and could cause injury.
qHeight Adjustment (Driver's Seat)

By moving the seat lever up or down, the
driver's seat bottom height can be
adjusted.
Up
Down
2-4
Form No.8AS3-EA-09E
Front Seats (Electrically

Operated Seats)
WARNING
Do not modify or replace the front
seats:
Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front seats contain air bag
components essential to the
supplemental restraint system. Such
modifications could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
Do not drive with damaged front seats:
Driving with damaged front seats is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag
components. If there was a
subsequent collision, an air bag may
not deploy which could lead to
injuries. Always have an Authorized
Mazda Dealer inspect the front seats,
front seat belt pretensioners and air
bags after a collision.
Seats
CAUTION
The seat-bottom power
adjustment is operated by motors.
Avoid extended operation because
excessive use can damage the
motors.
To prevent the battery from
running down, avoid using the
power adjustment when the
engine is stopped. The adjuster
uses a large amount of electrical
power.
Do not use the switch to make
more than one adjustment at a
time.
qSeat Slide
To slide the seat, move the slide lifter
switch on the outside of the seat to the
front or back and hold it. Release the
switch at the desired position.
qSeat Recline
WARNING
Do not drive with either front seat
reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you do not get the full
protection from seat belts. During
sudden braking or a collision, you
can slide under the lap belt and
suffer serious internal injuries. For
maximum protection, sit well back
and upright.
Always sit in the front passenger seat
properly with the seatback upright and
feet on the floor (With Driver and Front
System):
Your front passenger seat has weight
sensors, sitting in the front passenger
seat improperly out of position or
with the seatback reclined too far
dangerous as it can take off weight
from the seat bottom and affect the
weight determination of the front
passenger sensing system. As a result
the front passenger will not have the
supplementary protection of the air
bag and seat belt pretensioner, which
could result in serious injury. Always
sit upright against the seatback with
your feet on the floor.
2-5
Form No.8AS3-EA-09E
Seats
To change the seatback angle, press the
front or rear side of the reclining switch.
Release the switch at the desired position.
qSeat Position Memory (Driver's

Seat)
qHeight Adjustment (Driver's Seat)
The seat height can be adjusted by
moving the switch up or down.
One-touch seat position programming and

activation is available on the driver's seat.
CAUTION
When activating the seat position, do
not place your hands or fingers
around the seat bottom. The seat
moves to the desired position
automatically, and if your hands or
fingers are placed around the seat
bottom, it could cause injury.
Set button
Programming of the driver's seat positions

is possible using the following functions:
l Programming buttons 1, 2, or 3 and the
set button.
2-6
Some models.
Form No.8AS3-EA-09E
Seats
Operation using the advanced key/
retractable type key
Programmed seat positions can activated
using the following functions:
l Programming buttons 1, 2, or 3.
l Operation using advanced keyless
functions/keyless entry system
l
NOTE
Individual seat positions can be programmed
to the three available programming buttons on
the side of the driver's seat, plus one seat
position for each advanced key/retractable
type key used with the vehicle.
Setting the driver's seat to a preprogrammed position

There are two methods for setting the
driver's seat to a pre-programmed
position. For example, the type A method
can be used before sitting in the seat and
while the driver's door is open, and the
type B method can be used after getting in
the vehicle with the driver's door closed.
Operation using the seat-side buttons
TYPE A
When the ignition switched off and the
driver's door is open, press the
programming button 1, 2, or 3 for the
desired seating position.
Programming
NOTE
Park the vehicle in a safe location before

performing the seat position
programming. (Vehicle must be stopped)
In the following cases, the seat position set

function cancels:
l Any of the seat adjustment switches are
operated.
l The set switch is pressed.
l A programming button 1, 2, or 3 is pressed.
l The vehicle starts moving.
l Vehicle locking/unlocking is done using the
transmitter.
l Vehicle unlocking is done by pressing the
request switch on a front door while the
advanced key is being carried.
l Vehicle unlocking is done by touching the
sensor area on the backside of the front
door handle while the advanced key is
being carried.
1. Adjust the seat to the desired position.

For each seat position adjustment
method refer to the following pages:
Seat Slide (page 2-5)
Seat Recline (page 2-5)
Height Adjustment (page 2-6)
2. Press the desired programming button
1, 2, or 3 while pressing the set button
until a beep sound is heard.
The button is programmed after a beep
sound is heard. Other buttons can be
programmed using the same procedure.
NOTE
Vehicle maintenance or other reasons
requiring the vehicle battery to be
disconnected will result in the seat position
memory being erased.
In this case, re-program the seat positions.
TYPE B
When the ignition is switched ON or the
driver's door is closed, press and hold the
desired programming button 1, 2, or 3.
2-7
Form No.8AS3-EA-09E
Seats
NOTE
In the following cases, the seat position set
function cancels:
l Any of the seat adjustment switches are
operated.
l The vehicle starts moving.
Operation using the advanced key/

retractable type key
With advanced key
Lock button
Unlock button
After the following conditions have been

met, operate the seat and the advanced
key/retractable type key to program the
seat positions.
l The ignition switched off
(The auxiliary key/retractable type key
is removed from the ignition switch)
l The driver's door is open
1. Adjust the seat to the desired position.
For each seat position adjustment
method, refer to the following pages:
Seat Slide (page 2-5)
Seat Recline (page 2-5)
Height Adjustment (page 2-6)
2. Press and hold the unlock button on the
advanced key/retractable type key
while pressing the set button until a
beep sound is heard.
The advanced key/retractable type key
is programmed after a beep sound is
heard.
With retractable type key

Unlock button
Lock button
Operation
indicator light
Programming
One seat position can be programmed into
each advanced key/retractable type key.
2-8
Form No.8AS3-EA-09E
Seat position activation

With the ignition switched off, unlock the
doors using any of the following methods
and open the driver's door within about 40
seconds to set the driver's seat to a preprogrammed position.
l Press the unlock switch on the
advanced key/retractable type key.
l Touch the sensor area on the backside
of the front door handle while the
Seats
NOTE
If any of the following occurs, the seat position
activation function cancels:
l Press the lock/unlock button while the key
is not inserted into the ignition switch or
the key slot.
l A seat adjustment switch is operated.
l The vehicle moves or starts to move.
l The selected programming button 1, 2, or 3
or the set button is pressed again.
l Press the request switch on a front door
while the advanced key is being carried.
l Touch the sensor area on the backside of
the front door handle while the advanced
key is being carried.
qLumbar Support Adjustment

(Driver's Seat)
The amount of lumbar support can be
adjusted by rotating dial.
Erasing memory
After the following conditions have been
met, press the lock button on the
advanced key/retractable type key while
pressing the set button until a beep sound
is heard.
l The ignition switch is in the LOCK
position
(The auxiliary key/retractable type key
is removed from the ignition switch)
l The driver's door is open
NOTE
Memory will also be erased if any of the
following operations are performed:
l The advanced key/retractable type key code
has been changed.
Refer to Immobilizer System (with
Advanced Key) on page 3-52.
Refer to Immobilizer System (without
Advanced Key) on page 3-56.
l The vehicle battery is disconnected for
vehicle maintenance or other reasons.
2-9
Form No.8AS3-EA-09E
Seats
Rear Seat
WARNING
Make sure luggage and cargo is
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
Do not drive with the seatback
unlocked:
All of the seatbacks play an
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
occupants in a sudden stop or
collision, resulting in severe injury.
After returning the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
Never give the car keys to children and
do not allow them to play in the
vehicle:
Playing with the folding rear seats is
dangerous. Once the seatbacks are
back up, a child in the trunk would
not be able to get out the way they
had entered. If you have small
children, keep the seatbacks locked.
2-10
Form No.8AS3-EA-09E
Always leave your car locked and keep

the car keys safely away from children:
Leaving your car unlocked or the
keys in reach of children is
dangerous. Children who find their
way into the trunk through an
unlocked rear seatback or an open
trunk can become accidentally locked
in the trunk. This could result in
death or brain damage from heat
prostration, particularly in the
summer. Always lock the doors and
the trunk, and as an added measure,
keep the rear seatbacks locked,
whether you have children in your
home or not.
Do not leave the key in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. Children may find these new
kinds of keys to be an interesting toy
to play with and could cause the
power windows or other controls to
operate, or even make the vehicle
move.
NOTE
When returning a rear seat to its original
position, also replace the seat belt to its
normal position. Verify that the seat belt pulls
out and retracts.
Seats
qSplit-Folding Rear Seatback
The seatbacks can be folded down to
provide more space in the trunk.
To fold down the seatbacks
WARNING
Always remove the child-restraint
system from the rear seat before
operating the straps (in trunk) for the
rear seat:
Operating (pulling) the straps (in
trunk) while a rear-facing childrestraint system is in the rear seat is
dangerous. It could cause injury to a
child seated in the child-restraint
system when the seatback suddenly
flips forward.
Make sure there is nobody in the rear
seat area before operating (pulling) the
straps (in trunk):
Not checking the rear seat area for
persons before folding the seatbacks
down with the straps (in trunk) is
dangerous. The rear seat area is
difficult to see from the rear of the
vehicle. Operating (pulling) the straps
(in trunk) without checking could
cause injury to a person when a
seatback suddenly flips forward.
CAUTION
Before folding the seatbacks down
with the straps (in trunk), make sure
there is no cup in a rear cup holder.
Folding the seatbacks with the straps
(in trunk) while a cup is in the cup
holder could soil or damage the seat
bottom and seatback.
CAUTION
Be careful of the following when
using the straps (in trunk):
On a downward slope, the seatback
could flip forward faster than on a
flat surface.
1. After checking that the rear seats are
clear, open the trunk and pull the straps
(in trunk) on the left and right sides of
the trunk.
2. Open the rear door and fold the rear

seatbacks forward.
To return the seatbacks to the upright
position
1. Lift the seatbacks upright.
2. Pull on the top of the seatbacks from
inside the vehicle to make sure they are
locked.
WARNING
Always make sure the seat belts are
fully pulled out from under the
seatbacks:
A seat belt caught under a seatback
after the seatback is returned to its
upright position is dangerous. In a
collision or sudden stop, the seat belt
cannot provide adequate protection.
2-11
Form No.8AS3-EA-09E
Seats
qArmrest
The rear armrest in the center of the rear
seatback can be used (no occupant in the
center seat) or placed upright.
Head Restraints
Head restraints are intended to help
protect you and the passengers from neck
injury.
WARNING
Armrest
Always drive with the head restraints

installed when seats are being used
and make sure they are properly
adjusted:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stopcatch release, then push the head restraint
down.
Adjust the head restraint so that the top is
even with the top of the passenger's ears,
never the passenger's neck to prevent
injury.
Front seat
2-12
Form No.8AS3-EA-09E
Seats
Rear seat
Seat Warmer
Press the HI or LO side of the seat warmer
switch with the ignition is switched ON.
The indicator on the switch illuminates
and the seat warms up.
If a higher temperature is preferred, press
the HI side of the switch, and for a lower
temperature, press the LO side.
When not using the seat warmer, set the
switch to neutral with neither HI or LO
depressed.
Some models.
Form No.8AS3-EA-09E
2-13
Seats
WARNING
Be careful when using the seat
warmer. The heat from the seat
warmer may be too hot for some
people, as indicated below, and
could cause a low-temperature
burn.
Infants, small babies, elderly
people, and physically
challenged people
People with delicate skin
People who are excessively
fatigued
People who are drunk
People who have taken sleepinducing medicine such as
sleeping pills or cold medicine
Do not use the seat warmer with
anything having high moistureretention ability such as a blanket
or cushion on the seat. The seat
may be heated excessively and
cause a low-temperature burn.
Do not use the seat warmer even
when taking a short nap in the
vehicle. The seat may be heated
excessively and cause a lowtemperature burn.
Do not place heavy objects with
sharp projections on the seat, or
insert needles or pins into it. This
could cause the seat to become
excessively heated and result in
injury from a minor burn.
CAUTION
Do not use organic solvents to clean
the seat. It may damage the seat
surface and the heater.
2-14
Form No.8AS3-EA-09E
NOTE
Use the seat warmer when the engine is
running, and do not continue to use it for a
long period of time.
The temperature of the seat warmer cannot be
adjusted beyond High and Low because the
seat warmer is controlled by a thermostat.
Seat Belt Systems

Seat Belt Precautions
Seat belts help to decrease the possibility of severe injury during accidents and sudden
stops. Mazda recommends that the driver and all passengers always wear seat belts.
All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way
when not in use.
The driver's seat belt has no provisions for child-restraint systems and has only an
emergency locking mode. The driver may wear it comfortably, and it will lock during a
collision.
However, the front passenger's seat and all rear lap/shoulder belt retractors operate in two
modes: emergency locking mode, and for child-restraint systems, automatic locking mode.
While we recommend you put all children in the rear seats, if you must use the front
passenger seat for a child, slide the front passenger seat as far back as possible and make
sure any child-restraint system is secured properly.
2-15
Form No.8AS3-EA-09E
Seat Belt Systems

WARNING
Always wear your seat belt and make sure all occupants are properly restrained:
Not wearing a seat belt is extremely dangerous. During a collision, occupants not
wearing seat belts could hit someone or things inside the vehicle or even be thrown
out of the vehicle. They could be seriously injured or even killed. In the same
collision, occupants wearing seat belts would be much safer.
Do not wear twisted seat belts:
Twisted seat belts are dangerous. In a collision, the full width of the belt is not
available to absorb the impact. This puts more force on the bones beneath the belt,
which could cause serious injury or death.
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt
used in this way cannot spread the impact forces properly and the two passengers
could be crushed together and seriously injured or even killed. Never use one belt for
more than one person at a time and always operate the vehicle with each occupant
properly restrained.
Do not operate a vehicle with a damaged seat belt:
Using a damaged seat belt is dangerous. An accident could damage the belt
webbing of the seat belt in use. A damaged seat belt cannot provide adequate
protection in a collision. Have an Authorized Mazda Dealer inspect all seat belt
systems in use during an accident before they are used again.
Have your seat belts changed immediately if the pretensioner or load limiter has
been expended:
One or both front air bags may deploy, and the corresponding pretensioner(s) may
also deploy at the same time. Like the air bags, the seat belt pretensioners will only
function once. While it is safer to use a post-crash (a seat belt that was used in an
accident) than no seat belt at all, using a seat belt with an expended pretensioner or
load limiter loaded reduces the safety available to you. If the seat belt pretensioners
are not replaced, the risk of injury in a collision will increase. Expended seat belt
pretensioners and air bags must be replaced after any collision which caused them
to deploy. Additionally, the load limiter will only limit loads on the chest once in a
collision and this is another reason to have the front seat belts inspected. Always
have an Authorized Mazda Dealer inspect the seat belt pretensioners and air bags
after any collision.
2-16
Form No.8AS3-EA-09E
Seat Belt Systems

CAUTION
Belt retraction may become difficult if the belts and rings are soiled, so try to keep
them clean. For more details about cleaning the seat belts, refer to Cleaning the
Lap/Shoulder Belt Webbing (page 8-57).
qPregnant Women and Persons with Serious Medical Conditions

Pregnant women should always wear seat belts. Ask your doctor for specific
recommendations.
The lap belt should be worn SNUGLY AND AS LOW AS POSSIBLE OVER THE HIPS.
The shoulder belt should be worn across your shoulder properly, but never across the
stomach area.
Persons with serious medical conditions also should wear seat belts. Check with your
doctor for any special instructions regarding specific medical conditions.
qEmergency Locking Mode

In the emergency locking mode, the belt remains comfortable on the occupant and the
retractor will lock in position during a collision. When the seat belt is fastened, it will
always be in the emergency locking mode until it is switched to automatic locking mode by
pulling it all the way out to its full length. If the belt feels tight and hinders comfortable
movement while the vehicle is stopped or in motion, it may be in the automatic locking
mode because the belt has been pulled too far out. To return the belt to the more
comfortable emergency locking mode, wait until the vehicle has stopped in a safe, level
area, retract the belt fully to convert it back to emergency locking mode and then extend it
around you again.
If the belt is locked and cannot be pulled out, retract the belt once, and then try pulling it
out slowly. If this fails, pull the belt strongly one time and loosen, then pull it out again
slowly.
2-17
Form No.8AS3-EA-09E
Seat Belt Systems

qAutomatic Locking Mode
Always use the automatic locking mode to keep the child-restraint system from shifting to
an unsafe position in the event of an accident. To enable seat belt automatic locking mode,
pull it all the way out and connect it as instructed on the child-restraint system. It will
retract down to the child-restraint system and stay locked on it. See the section on child
restraint (page 2-27).
2-18
Form No.8AS3-EA-09E
Seat Belt Systems

WARNING
Seat Belt
qFastening the Seat Belt
1. Grasp the seat belt tongue.
2. Slowly pull out the lap/shoulder belt.
Lap/shoulder
belt
Seat belt
tongue
3. Insert the seat belt tongue into the seat

belt buckle until you hear a click
sound.
Seat belt tongue
Positioning the Shoulder Portion of the

Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
4. Position the lap belt as low as possible,
not on the abdominal area, then adjust
the shoulder belt so that it fits snugly
against your body.
Take up slack
Keep low on
hip bone
Too high
WARNING
Seat belt
buckle
Positioning the Lap Portion of the Seat

Belt:
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low
as possible.
2-19
Form No.8AS3-EA-09E
Seat Belt Systems

qUnfastening the Seat Belt
qFront Shoulder Belt Adjuster
Depress the button on the seat belt buckle.

If the belt does not fully retract, pull it out
and check for kinks or twists. Then make
sure it remains untwisted as it retracts.
Adjust the height of the shoulder belt if

the seat belt touches your neck, or if it
crosses your arm instead of your shoulder.
To raise the shoulder belt adjuster, push
the adjuster up. To lower the shoulder belt
adjuster, pull the adjuster and slide it
down. Make sure the adjuster is locked.
To raise
To lower
Button
NOTE
If a belt does not fully retract, inspect it for
kinks and twists. If it is still not retracting
properly, have it inspected at an Authorized
Mazda Dealer.
2-20
Form No.8AS3-EA-09E
WARNING
Positioning the Shoulder Portion of the
Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
Seat Belt Systems

Front Seat Belt Pretensioner
and Load Limiting Systems
For optimum protection, the driver and
front passenger seat belts are equipped
with pretensioner and load limiting
systems. For both these systems to work
properly you must wear the seat belt
properly.
Pretensioners:
In moderate or severe frontal or nearfrontal accidents, the front air bag and
pretensioner systems deploy
simultaneously. The front seat belt
retractors remove slack quickly as the air
bags are expanding. Any time the air bags
and front seat belt pretensioners have fired
they must be replaced.
(With Driver and Front Passenger
Occupant Classification System)
In addition, the pretensioner system for
the front passenger, like the front
passenger air bag, is designed to only
deploy in accordance with the total seated
weight on the front passenger seat.
For details, refer to the front passenger
seat weight sensors (page 2-53).
Load limiter:
The load limiting system releases belt
webbing in a controlled manner to reduce
belt force on the occupant's chest. While
the most severe load on a seat belt occurs
in frontal collisions, the load limiter has
an automatic mechanical function and can
activate in any accident mode with
sufficient occupant movement.
Even if the pretensioners have not fired,
the load limiting function must be
checked by an Authorized Mazda Dealer
after any collision.
WARNING
Wear seat belts only as recommended
in this owner's manual:
Incorrect positioning of the driver and
front passenger seat belts is
dangerous. Without proper
positioning, the pretensioner and
load limiting systems cannot provide
adequate protection in an accident
and this could result in serious injury.
For more details about wearing seat
belts, refer to Fastening the seat
belts (page 2-19).
Have your seat belts changed
immediately if the pretensioner or load
limiter has been expended:
One or both front air bags may
deploy, and the corresponding
pretensioner(s) may also deploy at
the same time. Like the air bags, the
front seat belt pretensioners will only
function once. While it is safer to use
a post-crash (a seat belt that was
used in an accident) than no front
seat belt at all, using a front seat belt
with an expended pretensioner or
load limiter loaded reduces the safety
available to you. If the front seat belt
pretensioners are not replaced, the
risk of injury in a collision will
increase. Expended front seat belt
pretensioners and air bags must be
replaced after any collision which
caused them to deploy. Additionally,
the load limiter will only limit loads
on the chest once in a collision and
this is another reason to have the
front seat belts inspected. Always
have an Authorized Mazda Dealer
inspect the front seat belt
pretensioners and air bags after any
collision.
2-21
Form No.8AS3-EA-09E
Seat Belt Systems

Do not modify the components or
wiring, or use electronic testing devices
on the pretensioner system:
Modifying the components or wiring
of the pretensioner system, including
the use of electronic testing devices is
dangerous. You could accidentally
activate it or make it inoperable
which would prevent it from
activating in an accident. The
occupants or repairers could be
seriously injured.
Properly dispose of the pretensioner
system:
Improper disposal of the pretensioner
system or a vehicle with nondeactivated pretensioners is
dangerous. Unless all safety
procedures are followed, injury could
result. Ask an Authorized Mazda
Dealer how to safely dispose of the
pretensioner system or how to scrap
a pretensioner-equipped vehicle.
NOTE
l
The pretensioner system will activate in a

moderate or greater frontal or near-frontal
collision. It will not activate in most
rollovers, side or rear impacts.
(With Driver and Front Passenger
The pretensioner system for the front
passenger is designed to only deploy in
accordance with the total seated weight on
the front passenger seat.
Some smoke (non-toxic gas) will be
released when the air bags and
pretensioners deploy. This does not indicate
a fire. This gas normally has no effect on
occupants, however, those with sensitive
skin may experience light skin irritation. If
residue from the deployment of the air bags
or the front pretensioner system gets on the
skin or in the eyes, wash it off as soon as
possible.
qAir Bag/Front Seat Belt

Pretensioner System Warning Light
If the air bag/front seat belt pretensioner

system is working properly, the warning
light illuminates when the ignition is
switched ON or after the engine is
cranked. The warning light turns off after
a specified period of time.
2-22
Form No.8AS3-EA-09E
Seat Belt Systems

A system malfunction is indicated if the
warning light constantly flashes,
constantly illuminates or does not
illuminate at all when the ignition is
switched ON. If any of these occur,
consult an Authorized Mazda Dealer as
soon as possible. The system may not
work in an accident.
WARNING
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death.
WARNING
Do not drive the vehicle with the air
bag/front seat belt pretensioner system
warning beep sounding:
Driving the vehicle with the air bag/
front seat belt pretensioner system
warning beep sounding is dangerous.
In a collision, the air bags and the
will not deploy and this could result
in death or serious injury.
Contact an Authorized Mazda Dealer
to have the vehicle inspected as soon
as possible.

Pretensioner System Warning Beep
If a malfunction is detected in the air bag/
front seat belt pretensioner systems and
the warning light, a warning beep sound
will be heard for about 5 seconds every
minute.
The air bag and seat belt pretensioner
system warning beep sound will continue
to be heard for approximately 35 minutes.
Have your vehicle inspected at an
Authorized Mazda Dealer as soon as
possible.
2-23
Form No.8AS3-EA-09E
Seat Belt Systems

Seat Belt Extender
If your seat belt is not long enough, even
when fully extended, a seat belt extender
may be available to you at no charge from
your Authorized Mazda Dealer.
This extender will be only for you and for
the particular vehicle and seat. Even if it
plugs into other seat belts, it may not hold
in the critical moment of a crash.
When ordering an extender, only order
one that provides the necessary additional
length to fasten the seat belt properly.
Please contact your Authorized Mazda
Dealer for more information.
WARNING
Do not use a seat belt extender unless
it is necessary:
Using a seat belt extender when not
necessary is dangerous. The seat belt
will be too long and not fit properly.
In an accident, the seat belt will not
provide adequate protection and you
could be seriously injured. Only use
the extender when it is required to
fasten the seat belt properly.
Do not use an improper extender:
Using a seat belt extender that is for
another person or a different vehicle
or seat is dangerous. The seat belt
will not provide adequate protection
and the user could be seriously
injured in an accident. Only use the
extender provided for you and for the
particular vehicle and seat. NEVER
use the extender in a different vehicle
or seat. If you sell your Mazda, do
not leave your seat belt extender in
the vehicle. It could be used
accidentally by the new owner of the
vehicle. After removing the seat belt
extender, discard it. Never use the
seat belt extender in any other
vehicle you may own in the future.
Do not use an extender that is too
long:
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured.
Do not use the extender or choose
one shorter in length if the distance
between the extender's buckle and
the center of the user's body is less
than 15 cm (6 in).
2-24
Form No.8AS3-EA-09E
Seat Belt Systems

NOTE
When not in use, remove the seat belt extender
and store it in the vehicle. If the seat belt
extender is left connected, the seat belt
extender might get damaged as it will not
retract with the rest of the seat belt and can
easily fall out of the door when not in use and
be damaged. In addition, the seat belt warning
light will not illuminate and function properly.
Seat Belt Warning Light/Beep
The seat belt warning light illuminates

and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition is switched ON.
Conditions of operation
Condition
Result
The warning light
The driver's seat belt is not illuminates for about 1
fastened when the ignition is minute and a beep
switched ON.
sound will be heard
for about 6 seconds.
The driver's seat belt is
The warning light
fastened while the warning
turns off and the beep
light and the beep sound are
sound stops.
activated.
The warning light will
not illuminate and the
fastened before the ignition
beep sound will not be
is switched ON.
heard.
qBelt Minder
NOTE
The belt minder can be deactivated. Consult an
Authorized Mazda Dealer to deactivate or
restore the seat belt minder.
2-25
Form No.8AS3-EA-09E
Seat Belt Systems

Driver seated/Front passenger not
seated*
The belt minder is a supplemental
warning to the seat belt warning function.
If the driver's seat belt is not fastened
when the ignition is switched ON, the
warning light/beep operates to give you
further reminders according to the chart
below.
*: The belt minder operates according to
the chart below even if the front
passenger is seated (Without Driver
and Front Passenger Occupant
Classification System).
Condition
Driver seated/Front passenger seated

The seat belt warning function reminds
the front passenger to fasten the seat belt
according to the chart below.
Condition
Seat belt
(Driver)
Seat belt
(Passenger)
Indicator
Beep
Vehicle speed
Between 0 20
20 km/h
km/h
(12 mph) or
(0 12 mph)
more
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
Seat belt
Indicator
Beep
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
Once the beep sound is heard, it continues

sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period has passed.
Placing heavy items on the front

passenger seat may cause the front
passenger seat belt warning function to
operate depending on the weight of the
item.
period has passed.
NOTE
l
2-26
Form No.8AS3-EA-09E
Vehicle speed
Between 0 20
20 km/h
km/h
(12 mph) or
(0 12 mph)
more
To allow the front passenger seat weight

sensor to function properly, do not place
and sit on an additional seat cushion on the
front passenger seat. The sensor may not
function properly because the additional
seat cushion could cause sensor
interference.
When a small child sits on the front
passenger seat, it is possible that neither
the warning light nor the warning beep
operate.
Child Restraint
Child Restraint Precautions
Mazda strongly urges the use of child-restraint systems for children small enough to use
them.
You are required by law to use a child-restraint system for children in the U.S. and Canada.
Check your local and state or provincial laws for specific requirements regarding the safety
of children riding in your vehicle.
Whatever child-restraint system you consider, please pick the appropriate one for the age
and size of the child, obey the law and follow the instructions that come with the individual
child-restraint system.
A child who has outgrown child-restraint systems should sit in the rear and use seat belts,
both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer to
the center of the vehicle in the outboard seats, and towards the buckle on the right if the
child is seated on the center seat.
Statistics confirm that the rear seat is the best place for all children up to 12 years of age,
and more so with a supplemental restraint system (air bags).
A rear-facing child-restraint system should NEVER be used on the front seat with the air
bag system activated. The front passenger's seat is also the least preferred seat for other
child-restraint systems.
(With Driver and Front Passenger Occupant Classification System)
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
front passenger seat weight sensors work as a part of the supplemental restraint system.
This system deactivates the front passenger front and side air bags and also the front
passenger seat belt pretensioner system when the total seated weight on the front passenger
seat is less than approximately 30 kg (66 lb).
When an infant or small child sits on the front passenger seat, the system shuts off the front
passenger front and side air bags and seat belt pretensioner system, so make sure the front
passenger air bag deactivation indicator light illuminates.
Even if the front passenger air bag is shut off, Mazda strongly recommends that children be
properly restrained and child-restraint systems of all kinds are properly secured on the rear
seats which are the best place for children.
For more details, refer to Front passenger seat weight sensors (page 2-53).
2-27
Form No.8AS3-EA-09E
Child Restraint
WARNING
Use the correct size child-restraint system:
For effective protection in vehicle accidents and sudden stops, a child must be
properly restrained using a seat belt or child-restraint system depending on age and
size. If not, the child could be seriously injured or even killed in an accident.
Follow the manufacturer's instructions and always keep the child-restraint system
buckled down:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Make
sure any child-restraint system is properly secured in place according to the childrestraint system manufacturer's instructions. When not in use, remove it from the
vehicle or fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors
for LATCH child-restraint systems and the corresponding tether anchor.
Always secure a child in a proper child-restraint system:
Holding a child in your arms while the vehicle is moving is extremely dangerous. No
matter how strong the person may be, he or she cannot hold onto a child in a
sudden stop or collision and it could result in serious injury or death to the child or
other occupants. Even in a moderate accident, the child may be exposed to air bag
forces that could result in serious injury or death to the child, or the child may be
slammed into an adult, causing injury to both child and adult.
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates. The
child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
2-28
Form No.8AS3-EA-09E
Child Restraint
Do not install a front-facing child-restraint system on the front passenger seat unless
it is unavoidable:
In a collision, the force of a deploying air bag could cause serious injury or death to
the child. If installing a front-facing child-restraint system on the front passenger
seat is unavoidable, move the front passenger seat as far back as possible.
Seating a child in a child-restraint system on the front passenger seat is dangerous

(With Driver and Front Passenger Occupant Classification System):
Your vehicle is equipped with front passenger seat weight sensors. Even with the
front passenger seat weight sensors, if you must use the front passenger seat to seat
a child, using a child in a child-restraint system on the front passenger seat under
the following conditions increases the danger of the front passenger air bag
deploying and could result in serious injury or death to the child.
The total seated weight of the child with the child-restraint system on the front
passenger seat is approximately 30 kg (66 lb) or more with a child in the childrestraint system.
Luggage or other items are placed on the seat with the child in the child-restraint
system.
A rear passenger or luggage pushing or pulling down on the front passenger
seatback.
A rear passenger puts their feet on the front seat rails.
Luggage or other items are placed on the seatback or hung on the head restraint.
Heavy items are placed in the seatback map pocket.
The seat is washed.
Liquids are spilled on the seat.
The front passenger seat is moved backward, pushing into luggage or other items
placed behind it.
The front passenger seatback contacts the rear seat.
Luggage or other items are placed between the front passenger seat and driver
seat.
Any accessories, which might increase the total seated weight on the front
passenger seat, are attached to the front passenger seat.
The designated positions with seat belts on the rear seats are the safest places for
children. Always use seat belts and child restraints.
2-29
Form No.8AS3-EA-09E
Child Restraint
Do not allow a child or anyone to lean over or against the side window of a vehicle
with side and curtain air bags:
It is dangerous to allow anyone to lean over or against the side window, the area of
the front passenger seat, the front and rear window pillars and the roof edge along
both sides from which the side and curtain air bags deploy, even if a child-restraint
system is used. The impact of inflation from a side or curtain air bag could cause
serious injury or death to an out of position child. Furthermore, leaning over or
against the front door could block the side and curtain air bags and eliminate the
advantages of supplemental protection. With the front air bag and the additional
side air bag that comes out of the front seat, the rear seat is always a better location
for children. Take special care not to allow a child to lean over or against the side
window, even if the child is seated in a child-restraint system.
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt
used in this way cannot spread the impact forces properly and the two passengers
could be crushed together and seriously injured or even killed. Never use one belt for
more than one person at a time and always operate the vehicle with each occupant
properly restrained.
CAUTION
A seat belt or child-restraint system can become very hot in a closed vehicle during
warm weather. To avoid burning yourself or a child, check them before you or your
child touches them.
NOTE
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH
child-restraint systems in the rear seat. When using these anchors to secure a child-restraint system,
refer to LATCH Child-Restraint Systems (page 2-37).
2-30
Form No.8AS3-EA-09E
Child Restraint
Installing Child-Restraint
Systems
Accident statistics reveal that a child is
safer in the rear seat. The front passenger's
seat is clearly the worst choice for any
child under 12, and with rear-facing childrestraint systems it is clearly unsafe due to
air bags.
NOTE
Even if your vehicle is equipped with front
passenger seat weight sensors (page 2-53),
which automatically deactivates the front
passenger air bag, a rear seat is the safest
place for a child of any age or size.
Some child-restraint systems now come

with tethers and therefore must be
installed on the seats that take tethers to
be effective. In your Mazda, tethered
child-restraint systems can only be
accommodated in the three positions on
the rear seat.
Some child-restraint systems also employ
specially designed LATCH attachments;
refer to LATCH Child-Restraint
Systems (page 2-37).
WARNING
Tethered Child-Restraint Systems Work
Only on Tether-Equipped Rear Seats:
Installation of a tether equipped
child-restraint system in the front
passenger's seat defeats the safety
design of the system and will result in
an increased chance of serious injury
if the child-restraint system goes
forward without benefit of being
tethered.
Place tether equipped child-restraint
systems where there are tether
anchors.
qRear Seat Child-Restraint System

Installation
Follow these instructions when using a
child-restraint system, unless you are
attaching a LATCH-equipped childrestraint system to the rear LATCH lower
anchors. Refer to LATCH ChildRestraint Systems (page 2-37).
NOTE
Follow the child-restraint system
manufacturer's instructions carefully. If you
are not sure whether you have a LATCH
system or tether, check in the child-restraint
system manufacturer's instructions and follow
them accordingly. Depending on the type of
child-restraint system, it may use LATCH
system instead of seat belts or if the belt goes
across the child's chest, may recommend
against using automatic locking mode.
1. Raise the head restraint to the top

locked position (except center seat
position).
Refer to Head restraints on page 2-12.
2-31
Form No.8AS3-EA-09E
Child Restraint
2. Secure the child-restraint system with
the lap portion of the lap/shoulder belt.
See the manufacturer's instructions on
the child-restraint system for belt
routing instructions.
3. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
NOTE
Inspect this function before each use of the
child-restraint system. You should not be able
to pull the shoulder belt out of the retractor
while the system is in the automatic locking
mode. When you remove the child-restraint
system, be sure the belt fully retracts to return
the system to emergency locking mode before
occupants use the seat belts.
5. If your child-restraint system requires

the use of a tether strap, refer to the
manufacturer's instructions to hook and
tighten the tether strap (except center
position).
Anchor bracket location
4. Push the child-restraint system firmly

into the vehicle seat. Be sure the belt
retracts as snugly as possible. A
clicking noise from the retractor will be
heard during retraction if the system is
in the automatic locking mode. If the
belt does not lock the seat down tight,
repeat this step.
Tether strap position
Tether
strap
Anchor
bracket
2-32
Form No.8AS3-EA-09E
Child Restraint
WARNING
Use the tether and tether anchor only
for a child-restraint system:
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or
tether anchor and result in injury.
Always route the tether strap between
the head restraint and the seatback
(Except center seat position):
Routing the tether strap on top of the
head restraint is dangerous. In a
collision the tether strap could slide
off the head restraint and loosen the
child-restraint system. The childrestraint system could move which
may result in death or injury to the
child.
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the childrestraint system moves it could result
in death or injury to the child.
qIf You Must Use the Front Seat

for Children
If you cannot put all children in the rear
seat, at least put the smallest children in
the rear and be sure the largest child up
front uses the shoulder belt over the
shoulder.
NEVER put a rear-facing child-restraint
system on the front passenger seat
whether your vehicle is equipped with a
seat weight sensor or not.
This seat is also not set up for tethered
child-restraint systems, put them in one of
the rear seat positions set up with tether
anchors.
Likewise the LATCH child-restraint
system cannot be secured in the front
passenger's seat and should be used in the
rear seat.
Do not allow anyone to sleep against the
side window if you have an optional side
and curtain air bag, it could cause serious
injuries to an out of position occupant. As
children more often sleep in cars, it is
better to put them in the rear seat. If
installing the child-restraint system on the
front seat is unavoidable, follow these
instructions when using a front-facing
child-restraint system in the front
passenger's seat.
NOTE
l
To check if your front seats have side air

bags:
Mazda vehicles equipped with side air bag
will have a SRS AIRBAG tag on the
outboard shoulder of the front seats.
To check if your vehicle has curtain air
bags:
Mazda vehicles equipped with curtain air
bag will have an SRS AIRBAG marking
on the window pillars along the roof edge.
2-33
Form No.8AS3-EA-09E
Child Restraint
WARNING
Always move the front passenger seat
as far back as possible if installing a
front-facing child-restraint system on it
is unavoidable:
As your vehicle has front air bags
and doubly so because your vehicle
has side air bags, a front-facing
child-restraint system should be put
on the front passenger seat only
when it is unavoidable.
Even if the front passenger air bag
deactivation indicator light
illuminates, always move the seat as
far back as possible, because the
force of a deploying air bag could
cause serious injury or death to the
child.
Never use a rear-facing child-restraint
system in the front seat with an air bag
that could deploy:
Rear-facing child-restraint systems
on the front seat are particularly
dangerous.
Even in a moderate collision, the
child-restraint system can be hit by a
deploying air bag and moved
violently backward resulting in
serious injury or death to the child.
Even though you may feel assured
that the front passenger air bag will
not deploy based on the fact that the
front passenger air bag deactivation
indicator light illuminates.
2-34
Form No.8AS3-EA-09E
Do not allow a child or anyone to lean

over or against the side window of a
vehicle with side and curtain air bags:
It is dangerous to allow anyone to
lean over or against the side window,
the area of the front passenger seat,
the front and rear window pillars and
the roof edge along both sides from
which the side and curtain air bags
deploy, even if a child-restraint
system is used. The impact of
inflation from a side or curtain air
bag could cause serious injury or
death to an out of position child.
Furthermore, leaning over or against
the front door could block the side
and curtain air bags and eliminate
the advantages of supplemental
protection. With the front air bag and
the additional side air bag that
comes out of the front seat, the rear
seat is always a better location for
children. Take special care not to
allow a child to lean over or against
the side window, even if the child is
seated in a child-restraint system.
qFront Passenger's Seat ChildRestraint System Installation

1. Slide the seat as far back as possible.
Child Restraint
2. Secure the child-restraint system with
the lap portion of the lap/shoulder belt.
See the manufacturer's instructions on
the child-restraint system for belt
routing instructions.
3. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
5. (With Driver and Front Passenger

Make sure the front passenger air bag
deactivation indicator light illuminates
after installing a child-restraint system
on the front passenger seat.
Refer to Front passenger air bag
deactivation indicator light on page
2-53.
4. Push the child-restraint system firmly

into the vehicle seat. Be sure the belt
retracts as snugly as possible. A
clicking noise from the retractor will be
heard during retraction if the system is
in automatic locking mode. If the belt
does not lock the seat down tight,
repeat the previous step and also this
one.
NOTE
l
Inspect this function before each use of the

child-restraint system. You should not be
able to pull the shoulder belt out of the
retractor while the system is in the
automatic locking mode. When you remove
the child-restraint system, be sure the belt
fully retracts to return the system to
emergency locking mode before occupants
use the seat belts.
Follow the child-restraint system
manufacturer's instructions carefully.
Depending on the type of child-restraint
system, it may not employ seat belts which
are in automatic locking mode.
2-35
Form No.8AS3-EA-09E
Child Restraint
WARNING
Do not seat a child in a child-restraint
system on the front passenger seat if
the front passenger air bag
deactivation indicator light does not
illuminate (With Driver and Front
System):
While it is always better to install any
child-restraint system on the rear
seat, it is imperative that a childrestraint system ONLY be used on the
front passenger seat if the
illuminates when the child is seated
in the child-restraint system (page
2-53). Seating a child in a childrestraint system installed on the front
passenger seat with the front
passenger air bag deactivation
indicator light not illuminated is
dangerous. If this indicator light does
not illuminate even when the total
seated weight is less than
approximately 30 kg (66 lb), this
means that the front passenger front
and side air bags, and seat belt
pretensioner are ready for
deployment. If an accident were to
deploy an air bag, a child in a childrestraint system sitting in the front
passenger seat could be seriously
injured or killed. If the indicator light
does not illuminate after seating a
child in a child-restraint system on
the front passenger seat, seat a child
in a child-restraint system on the rear
seat and consult an Authorized
Mazda Dealer as soon as possible.
2-36
Form No.8AS3-EA-09E
Child Restraint
LATCH Child-Restraint Systems
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed
LATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise the
seat will bounce around and put the child in danger. Most LATCH child-restraint systems
must also be used in conjunction with a tether to be effective. If they have a tether you
must use it to better assure your child's safety.
WARNING
Follow the manufacturer's instructions for the use of the child-restraint system:
could move causing serious injury or death to the child or other occupants. Make
sure the child-restraint system is properly secured in place according to the childrestraint system manufacturer's instructions.
Never attach two child-restraint systems to the same LATCH lower anchor:
Attaching two child-restraint systems to the same LATCH lower anchor is dangerous.
In a collision, one anchor may not be strong enough to hold two child-restraint
system attachments, and it may break, causing serious injury or death. If you use the
seat position for another child-restraint system when an outboard LATCH position is
occupied, use the center seat belts instead, and the tether if tether-equipped.
Make sure the child-restraint system is properly secured:
could move causing serious injury or death to the child or other occupants. Follow
the child-restraint system manufacturer's instructions on belt routing to secure the
seat just as you would with a child in it so that nobody is tempted to put a child in
an improperly secured seat later on. When not in use, remove it from the vehicle or
fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH
child-restraint systems.
Make sure there are no seat belts or foreign objects near or around the LATCH childrestraint system:
Not following the child-restraint system manufacturer's instructions when installing
the child-restraint system is dangerous. If seat belts or a foreign object prevent the
child-restraint system from being securely attached to the LATCH lower anchors and
the child-restraint system is installed improperly, the child-restraint system could
move in a sudden stop or collision causing serious injury or death to the child or
other occupants. When installing the child-restraint system, make sure there are no
seat belts or foreign objects near or around the LATCH lower anchors. Always follow
the child-restraint system manufacturer's instructions.
NOTE
To install a child-restraint system on the rear-seat center position, use a seat belt-secured childrestraint system.
2-37
Form No.8AS3-EA-09E
Child Restraint
qLATCH Child-Restraint System
Installation Procedure (Rear
Outboard Seats)
1. Make sure the seatback is securely

latched by pushing it back until it is
fully locked.
2. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
Tether
strap
3. Raise the head restraint to the top

locked position.
Refer to Head restraints on page 2-12.
4. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction. Pull on the
child-restraint to be sure both anchors
are engaged.
5. If your child-restraint system came
equipped with a tether, that means it is
very important to properly secure the
tether for child safety. Please carefully
follow the child-restraint system
manufacturer's instructions when
installing tethers.
2-38
Form No.8AS3-EA-09E
Anchor
bracket
Child Restraint
WARNING
Always route the tether strap between
the head restraint and the seatback:
Routing the tether strap on top of the
head restraint is dangerous. In a
collision the tether strap could slide
off the head restraint and loosen the
child-restraint system. The childrestraint system could move which
may result in death or injury to the
child.
qLATCH Child-Restraint System

Installation Procedure (Rear
Center Seat)
The LATCH lower anchors at the center
of the rear seat are much further apart than
the sets of LATCH lower anchors for
child-restraint system installation at other
seating positions. Child-restraint systems
with rigid LATCH attachments cannot be
installed on the center seating position.
Some LATCH equipped child-restraint
systems can be placed in the center
position and will reach the nearest
LATCH lower anchors which are 466 mm
(18.35 in) apart. LATCH compatible
child-restraint systems (with attachments
on belt webbing) can be used at this
seating position only if the child-restraint
system manufacturer's instructions state
that the child-restraint system can be
installed to LATCH lower anchors that are
466 mm (18.35 in) apart. Do not attach
two child-restraint systems to the same
LATCH lower anchor. If your childrestraint system has a tether, it must also
be used for your child's optimum safety.
2-39
Form No.8AS3-EA-09E
Child Restraint
WARNING
3. Secure the child-restraint system using

BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instructions. Pull on the
child-restraint to be sure both anchors
are engaged.
4. If your child-restraint system came
equipped with a tether, that means it is
very important to properly secure the
tether for child safety. Please carefully
follow the child-restraint system
manufacturer's instructions when
installing tethers.
1. Make sure the seatback is securely

latched by pushing it back until it is
fully locked.
2. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
Tether
strap
Anchor
bracket
2-40
Form No.8AS3-EA-09E
SRS Air Bags

Supplemental Restraint System (SRS) Precautions
The front and side supplemental restraint systems (SRS) include 6 air bags. Please verify
the air bags equipped on your vehicle by locating the SRS AIRBAG location
indicators. These indicators are visible in the area where the air bags are installed.
The air bags are installed in the following locations:
l
l
l
l
The steering wheel hub (driver air bag)

The front passenger dashboard (front passenger air bag)
The outboard sides of the front seatbacks (side air bags)
The front and rear window pillars, and the roof edge along both sides (curtain air bags)
The air bag supplemental restraint systems are designed to provide supplemental protection
in certain situations, so seat belts are always important in the following ways:
Without seat belt usage, the air bags cannot provide adequate protection during an accident.
Seat belt usage is necessary to:
l Keep the occupant from being thrown into an inflating air bag.
l Reduce the possibility of injuries during an accident that is not designed for air bag
inflation, such as roll-over or rear impact.
l Reduce the possibility of injuries in frontal, near frontal, side collisions that are not
severe enough to activate the air bags.
l Reduce the possibility of being thrown from your vehicle.
l Reduce the possibility of injuries to lower body and legs during an accident because the
air bags provide no protection to these parts of the body.
l Hold the driver in a position which allows better control of the vehicle.
If your vehicle is also equipped with a driver and front passenger occupant
classification system, refer to the Driver and Front Passenger Occupant Classification
System (page 2-53) for details.
Small children must be protected by a child-restraint system as stipulated by law in every
state and province. In certain states and provinces, larger children must use a child-restraint
system (page 2-27).
Carefully consider which child-restraint system is necessary for your child and follow the
installation directions in this Owner's Manual as well as the child-restraint system
manufacturer's instructions.
2-41
Form No.8AS3-EA-09E
SRS Air Bags

WARNING
Seat belts must be worn in air bag equipped vehicles:
Depending only on the air bags for protection during an accident is dangerous.
Alone, air bags may not prevent serious injuries. The appropriate air bags can be
expected to inflate only in the first accident, such as frontal, near frontal, side
collisions that are at least moderate. Vehicle occupants should always wear seat
belts.
Children should not ride in the front passenger seat:
Placing a child, 12 years or under, in the front seat is dangerous. The child could be
hit by a deploying air bag and be seriously injured or even killed. Even if the front
passenger air bag deactivation indicator light illuminates, always move the front
passenger seat as far back as possible. A sleeping child is more likely to lean against
the door and be hit by the side air bag in a moderate, right-side collision. Whenever
possible, always secure a child 12 years and under on the rear seat with an
appropriate child-restraint system for the child's age and size.
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates. The
child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
Do not sit too close to the driver and front passenger air bags:
Sitting too close to the driver and front passenger air bag modules or placing hands
or feet on them is extremely dangerous. The driver and front passenger air bags
inflate with great force and speed. Serious injuries could occur if someone is too
close. The driver should always hold onto only the rim of the steering wheel. The
front seat passenger should keep both feet on the floor. Front seat occupants should
adjust their seats as far back as possible and always sit upright against the
seatbacks with seat belts worn properly.
2-42
Form No.8AS3-EA-09E
SRS Air Bags

Sit in the center of the seat and wear seat belts properly:
Sitting too close to the side air bag modules or placing hands on them, or sleeping
up against the door or hanging out the windows is extremely dangerous. The side
and curtain air bags inflate with great force and speed directly expanding along the
door on the side the car is hit. Serious injury could occur if someone is sitting too
close to the door or leaning against a window, or if rear seat occupants grab the
sides of the front seatbacks. Give the side and curtain air bags room to work by
sitting in the center of the seat while the vehicle is moving with seat belts worn
properly.
Do not attach objects on or around the area where driver and front passenger air
bags deploy:
Attaching an object to the driver and front passenger air bag modules or placing
something in front of them is dangerous. In an accident, an object could interfere
with air bag inflation and injure the occupants.
Do not attach objects on or around the area where a side air bag deploys:
Attaching things to the front seat in such a way as to cover the outboard side of the
seat in any way is dangerous. In an accident the object could interfere with the side
air bag, which inflates from the outboard side of the front seats, impeding the added
protection of the side air bag system or redirecting the air bag in a way that is
dangerous. Furthermore, the bag could be cut open releasing the gas.
Do not hang net bags, map pouches or backpacks with side straps on the front
seats. Never use seat covers on the front seats. Always keep the side air bag modules
in your front seats free to deploy in the event of a side collision.
Do not attach objects on or around the area where a curtain air bag deploys:
Attaching objects to the areas where the curtain air bag activates such as on the
windshield glass, side door glass, front and rear window pillars and along the roof
edge and assist grips is dangerous. In an accident the object could interfere with the
curtain air bag, which inflates from the front and rear window pillars and along the
roof edge, impeding the added protection of the curtain air bag system or redirecting
the air bag in a way that is dangerous. Furthermore, the bag could be cut open
releasing the gas.
Do not place hangers or any other objects on the assist grips. When hanging clothes,
hang them on the coat hook directly. Always keep the curtain air bag modules free
to deploy in the event of a side collision.
Do not place luggage or other objects under the front seats:
Placing luggage or other objects under the front seats is dangerous. The components
essential to the supplemental restraint system could be damaged, and in the event of
a side collision, the appropriate air bags may not deploy, which could result in death
or serious injury. To prevent damage to the components essential to the
supplemental restraint system, do not place luggage or other objects under the front
seats.
2-43
Form No.8AS3-EA-09E
SRS Air Bags

Do not touch the components of the supplemental restraint system after the air bags
have inflated:
Touching the components of the supplemental restraint system after the air bags
have inflated is dangerous. Immediately after inflation, they are very hot. You could
get burned.
Never install any front-end equipment to your vehicle:
Installation of front-end equipment, such as frontal protection bar (kangaroo bar,
bull bar, push bar, or other similar devices), snowplow, or winches, is dangerous. The
air bag crash sensor system could be affected. This could cause air bags to inflate
unexpectedly, or it could prevent the air bags from inflating during an accident.
Front occupants could be seriously injured.
Do not modify the suspension:
Modifying the vehicle suspension is dangerous. If the vehicle's height or the
suspension is modified, the vehicle will be unable to accurately detect a collision
resulting in incorrect or unexpected air bag deployment and the possibility of serious
injuries.
Do not modify the supplemental restraint system:
Modifying the components or wiring of the supplemental restraint system is
dangerous. You could accidentally activate it or make it inoperable. Do not make
any modifications to the supplemental restraint system. This includes installing trim,
badges, or anything else over the air bag modules. It also includes installing extra
electrical equipment on or near system components or wiring. An Authorized Mazda
Dealer can provide the special care needed in the removal and installation of front
seats. It is important to protect the air bag wiring and connections to assure that the
bags do not accidentally deploy, the driver seat slide position sensor and front
passenger seat weight sensors are not damaged and that the seats retain an
undamaged air bag connection.
NOTE
l
When an air bag deploys, a loud inflation noise can be heard and some smoke will be released.
Neither is likely to cause injury, however, the texture of the air bags may cause light skin injuries
on body parts not covered with clothing through friction.
Should you sell your Mazda, we urge you to tell the new owner of its air bag systems and that
familiarization with all instructions about them, from the Owner's Manual, is important.
2-44
Form No.8AS3-EA-09E
SRS Air Bags

Supplemental Restraint System Components
Driver/Front passenger inflators and air bags

Crash sensor, and diagnostic module (SAS unit)
Front seat belt pretensioner and load limiting systems (page 2-21)
Front air bag sensor
Side crash sensors
Air bag/front seat belt pretensioner system warning light (page 2-48)
Side and curtain inflators and air bags
Front passenger air bag deactivation indicator light (page 2-53)
Front passenger seat weight sensors (page 2-53)
Front passenger seat weight sensor control module
Driver and front passenger seat belt buckle switches (page 2-57)
Driver seat slide position sensor (page 2-53)
NOTE
system.
are equipped only on models with the driver and front passenger occupant classification
2-45
Form No.8AS3-EA-09E
SRS Air Bags

How the SRS Air Bags Work
Your Mazda is equipped with the following types of SRS air bags. SRS air bags are
designed to work together with the seat belts to help to reduce injuries during an accident.
The SRS air bags are designed to provide further protection for passengers in addition to
the seat belt functions. Be sure to wear seat belts properly.
qFront Seat Belt Pretensioners

The front seat belt pretensioners are designed to deploy in moderate or severe frontal, near
frontal collisions.
qDriver Air Bag

The driver's air bag is mounted in the steering wheels.
When air bag crash sensors detect a frontal impact of greater than moderate force, the
driver's air bag inflates quickly helping to reduce injury mainly to the driver's head or chest
caused by directly hitting the steering wheel.
The driver's dual-stage air bag controls air bag inflation in two energy stages. During an
impact of moderate severity the driver's air bag deploys with lesser energy, whereas during
more severe impacts, it deploys with more energy.
2-46
Form No.8AS3-EA-09E
SRS Air Bags

qFront Passenger Air Bag
The front passenger air bag is mounted in the front passenger dashboard. The inflation
mechanism for the front passenger air bag is the same as the driver's air bag, as mentioned
above.
In addition, the front passenger air bag is designed to only deploy in accordance with the
total seated weight on the front passenger seat. For details, refer to the driver and front
passenger occupant classification system (page 2-53).
qSide Air Bags

The side air bags are mounted in the outboard sides of the front seatbacks.
When the air bag crash sensors detect a side impact of greater than moderate force, the
system inflates the side air bag only on the side in which the vehicle was hit. The side air
bag inflates quickly to reduce injury to the driver or front passenger's chest caused by
directly hitting interior parts such as a door or window.
In addition, the front passenger side air bag is designed to only deploy in accordance with
the total seated weight on the front passenger seat. For details, refer to the driver and front
passenger occupant classification system (page 2-53).
2-47
Form No.8AS3-EA-09E
SRS Air Bags

qCurtain Air Bags
The curtain air bags are mounted in the front and rear window pillars, and the roof edge
along both sides.
When the air bag crash sensors detect a side impact of greater than moderate force, the
curtain air bag inflates quickly and helps to reduce injury mainly to the rear outboard
passenger's head caused by directly hitting interior parts such as a door or window.
In a side impact:
Greater than moderate impact to one side of the vehicle will cause the curtain air bag on
that side only to inflate.
The side and curtain air bags will deploy only
on the side the vehicle receives the force of
the impact.
qAir Bag/Front Seat Belt Pretensioner System Warning Light
If the air bag/front seat belt pretensioner system is working properly, the warning light
illuminates when the ignition is switched ON or after the engine is cranked. The warning
light turns off after a specified period of time.
A system malfunction is indicated if the warning light constantly flashes, constantly
illuminates or does not illuminate at all when the ignition is switched ON. If any of these
occur, consult an Authorized Mazda Dealer as soon as possible. The system may not work
in an accident.
2-48
Form No.8AS3-EA-09E
SRS Air Bags

WARNING
Never tamper with the air bag/pretensioner systems and always have an Authorized
Mazda Dealer perform all servicing and repairs:
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner
could accidentally activate or become disabled causing serious injury or death.
qAir Bag/Front Seat Belt Pretensioner System Warning Beep

If a malfunction is detected in the air bag/front seat belt pretensioner systems and the
warning light, a warning beep sound will be heard for about 5 seconds every minute.
The air bag and seat belt pretensioner system warning beep sound will continue to be heard
for approximately 35 minutes.
Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible.
WARNING
Do not drive the vehicle with the air bag/front seat belt pretensioner system warning
beep sounding:
Driving the vehicle with the air bag/front seat belt pretensioner system warning beep
sounding is dangerous. In a collision, the air bags and the front seat belt
pretensioner system will not deploy and this could result in death or serious injury.
Contact an Authorized Mazda Dealer to have the vehicle inspected as soon as
possible.
2-49
Form No.8AS3-EA-09E
SRS Air Bags

SRS Air Bag Deployment Criteria
This chart indicates the applicable SRS equipment that will deploy depending on the type
of collision.
(The illustrations are the representative cases of collisions.)
A severe frontal/near frontal collision
Types of collision
A severe side collision
A rear collision
SRS
equipment
Front seat
belt
pretensioner
Driver air
bag
Front
passenger air
bag
X*1(both sides)
X
No air bag and front seat
belt pretensioner will be
activated in a rear collision.
*1
Side air bag

Curtain air
bag
X*1(impact side only)

X (impact side only)
X: The SRS air bag equipment is designed to deploy in a collision.

*1: (With Driver and Front Passenger Occupant Classification System)
The front passenger front and side air bags and the seat belt pretensioner are designed
to deploy depending on the condition of the total seated weight on the front passenger
seat.
2-50
Form No.8AS3-EA-09E
SRS Air Bags

Limitations to SRS Air Bag
In severe collisions such as those described previously in SRS Air Bag Deployment
Criteria, the applicable SRS air bag equipment will deploy. However, in some accidents,
the equipment may not deploy depending on the type of collision and its severity.
Limitations to front/near front collision detection:
The following illustrations are examples of front/near front collisions that may not be
detected as severe enough to deploy the SRS air bag equipment.
Impacts involving trees or poles
Frontal offset impact to the vehicle
Rear-ending or running under a truck's tail gate
Limitations to side collision detection:

The following illustrations are examples of side collisions that may not be detected as
severe enough to deploy the SRS air bag equipment.
Side impacts involving trees or poles
Side impacts with two-wheeled vehicles
2-51
Form No.8AS3-EA-09E
SRS Air Bags
Roll-over
2-52
Form No.8AS3-EA-09E
SRS Air Bags

Driver and Front Passenger Occupant Classification System
First, please read Supplemental Restraint System (SRS) Precautions (page 2-41)
carefully.
NOTE
This system is equipped on models for the U.S., Canadian and Puerto Rican markets.
qDriver Seat Slide Position Sensor

Your vehicle is equipped with a driver seat slide position sensor as a part of the
supplemental restraint system. The sensor is located under the driver seat. The sensor
determines whether the driver seat is fore or aft of a reference position and sends the seat
position to the diagnostic module (SAS unit). The SAS unit is designed to control the
deployment of the driver air bag depending on how close the driver seat is to the steering
wheel.
The air bag/front seat belt pretensioner system warning light flashes if the sensor has a
possible malfunction (page 2-48).
qFront Passenger Seat Weight Sensors

Your vehicle is equipped with a front passenger seat weight sensors as a part of the
supplemental restraint system. These sensors are located under both of the front passenger
seat rails. These sensors determine the total seated weight on the front passenger seat. The
SAS unit is designed to prevent the front passenger front and side air bags and seat belt
pretensioner system from deploying if the total seated weight is less than approximately 30
kg (66 lbs).
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
system deactivates the front passenger front and side air bags and also the seat belt
pretensioner system when:
l
There is no passenger in the front passenger seat. (The front passenger air bag
deactivation indicator light does not illuminate.)
The total seated weight on the front passenger seat is less than approximately 30 kg (66
lbs). (The front passenger air bag deactivation indicator light illuminates.)
This system shuts off the front passenger front and side air bags and seat belt pretensioner
system, so make sure the front passenger air bag deactivation indicator light illuminates
according to the following table.
The air bag/front seat belt pretensioner system warning light flashes and the front
passenger air bag deactivation indicator light illuminates if the sensors have a possible
malfunction. If this happens, the front passenger front and side air bags and seat belt
pretensioner system will not deploy.
Some models.
Form No.8AS3-EA-09E
2-53
SRS Air Bags

Front passenger air bag deactivation indicator light
This indicator light illuminates to remind you that the front passenger front and side air
bags and seat belt pretensioner will not deploy during a collision.
If the front passenger weight sensors are normal, the indicator light illuminates when the
ignition switch is turned to the ON position. For a specified of time it goes out.
The front passenger air bag deactivation indicator light illuminates or is off under the following conditions:
OFF
Deactivated
Front passenger seat

belt pretensioner
system
Deactivated
ON
Deactivated
Deactivated
OFF
Ready
Ready
Total seated weight on the Front passenger air bag Front passenger front and
front passenger seat
side air bags
Empty (Not occupied)*
Less than approx. 30 kg
(66 lbs)
Approx. 42 kg (93 lbs) or
more
* If the front passenger seat belt is buckled, the front passenger air bag deactivation indicator light illuminates,
however this does not indicate a malfunction.
The curtain air bag is ready for inflating despite the chart above.
If the front passenger air bag deactivation indicator light does not illuminate when the
ignition switch is turned to the ON position and does not illuminate as indicated in the
above chart, do not allow a child to sit in the front passenger seat and consult an
Authorized Mazda Dealer as soon as possible. The system may not work properly in an
accident.
2-54
Form No.8AS3-EA-09E
SRS Air Bags

WARNING
Do not decrease the total seated weight on the front passenger seat:
When an adult or large child sits on the front passenger seat, decreasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 42 kg (93 lbs) required for air bag deployment is dangerous. The front
passenger seat weight sensors will detect the reduced total seated weight condition
and the front passenger front and side air bags and seat belt pretensioner system
will not deploy during an accident. The front passenger will not have the
supplementary protection of the air bag, which could result in serious injury.
Decreasing the total seated weight on the front passenger seat from the total seated
weight of approximately 42 kg (93 lbs) could result in an air bag not deploying under
the following conditions, for example:
A rear passenger pushes up on the front passenger seat with their feet.
Luggage or other items placed under the front passenger seat or between the
front passenger seat and driver seat that push up the front passenger seat
bottom.
The front passenger seat occupant sits in a manner that does not place the entire
weight of the occupant on the seat such as by sitting too close to the door,
grasping the assist grip or the rim of the moonroof and sitting with the seatback
reclined too far.
Any accessories which might decrease the total seated weight on the front
passenger seat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the total seated weight on the front passenger seat is close to 30 kg (66
lbs) and they will reactivate before the weight exceeds 42 kg (93 lbs).
2-55
Form No.8AS3-EA-09E
SRS Air Bags

Do not increase the total seated weight on the front passenger seat:
When an infant or small child sits on the front passenger seat, increasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 30 kg (66 lbs) is dangerous. The front passenger seat weight sensors
will detect the increased total seated weight, which could result in the unexpected
deployment of the front passenger front and side air bags and seat belt pretensioner
system in an accident and may cause serious injury. Increasing the total seated
weight on the front passenger seat beyond the total seated weight of approximately
30 kg (66 lbs) could result in the front passenger front and side air bags and seat
belt pretensioner system deployment in an accident under the following conditions,
for example:
Luggage or other items are placed on the seat with the child in the child-restraint
system.
A rear passenger or luggage push or pull down on the front passenger seatback.
A rear passenger steps on the front passenger seat rails with their feet.
Luggage or other items are placed on the seatback or hung on the head restraint.
Heavy items are placed in the seatback map pocket.
The seat is washed.
Liquids are spilled on the seat.
The front passenger seat is moved backward, pushing into luggage or other items
placed behind it.
The front passenger seatback contacts the rear seat.
Luggage or other items are placed between the front passenger seat and driver
seat.
Any accessories which might increase the total seated weight on the front
passenger seat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the total seated weight on the front passenger seat is close to 30 kg (66
lbs) and they will reactivate before the weight exceeds 42 kg (93 lbs).
CAUTION
To assure proper deployment of the front air bag and to prevent damage to the
sensors in the front seat bottoms:
Do not place sharp objects on the front seat bottoms or leave heavy luggage on
them.
Do not spill any liquids on the front seats or under the front seats.
To allow the sensors to function properly, always perform the following:
Adjust the front seats as far back as possible and always sit upright against the
seatbacks with seat belts worn properly.
If you place your child on the front passenger seat, secure the child-restraint
system properly and slide the front passenger seat as far back as possible (page
2-34).
2-56
Form No.8AS3-EA-09E
SRS Air Bags

NOTE
l
The system requires about 10 seconds to alternate between turning the front passenger front and
side air bags and seat belt pretensioner system on or off.
The front passenger air bag deactivation indicator light may illuminate repeatedly if luggage or
other items are put on the front passenger seat, or if the temperature of the vehicle's interior
changes suddenly.
The front passenger air bag deactivation indicator light may illuminate for 10 seconds if the total
seated weight on the front passenger seat changes.
If the front passenger air bag deactivation indicator light does not illuminate after installing a
child-restraint system on the front passenger seat, install the child-restraint system on the rear
seat and consult an Authorized Mazda Dealer as soon as possible.
qDriver and Front Passenger Buckle Switches

The buckle switches on the front seat belts detect whether or not the front seat belts are
securely fastened and further control the deployment of the air bags.
2-57
Form No.8AS3-EA-09E
SRS Air Bags

Monitoring and Maintenance
qConstant Monitoring
The following components of the air bag systems are monitored by a diagnostic system:
Crash sensors, and diagnostic module (SAS unit)
Front air bag sensor
l Air bag modules
l Side crash sensors
l Air bag/Front seat belt pretensioner system warning light
l Front seat belt pretensioners
l Related wiring
l Front passenger air bag deactivation indicator light
l Driver seat slide position sensor
l Front passenger seat weight sensors
l Front passenger seat weight sensor control module
l
l
The diagnostic module continuously monitors the system's readiness. This begins when the
ignition is switched ON and continues while the vehicle is being driven.
qMaintenance
The air bag systems do not require regular maintenance. But if any of the following occurs,
take your vehicle to an Authorized Mazda Dealer as soon as possible:
l The air bag system warning light flashes.
l The air bag system warning light remains illuminated.
l The air bag system warning light does not illuminate when the ignition is switched ON.
l The air bag system warning beep sound is heard.
l The air bags have deployed.
l (With Driver and Front Passenger Occupant Classification System)
Front passenger air bag deactivation indicator light does not illuminate when the ignition
is switched ON or does not illuminate as indicated in the chart. For more details about
this indicator light and this chart, refer to Front passenger seat weight sensors (page
2-53).
2-58
Form No.8AS3-EA-09E
SRS Air Bags

WARNING
Do not operate a vehicle with damaged air bag/seat belt pretensioner system
components:
Expended or damaged air bag/seat belt pretensioner system components must be
replaced after any collision which caused them to deploy or damage them. Only a
trained Authorized Mazda Dealer can fully evaluate these systems to see that they
will work in any subsequent accident. Driving with an expended or damaged air bag
or pretensioner unit will not afford you the necessary protection in the event of any
subsequent accident which could result in serious injury or death.
Do not remove interior air bag parts:
Removing any components such as the front seats, front dashboard, the steering
wheel or parts on the front and rear window pillars and along the roof edge,
containing air bag parts or sensors is dangerous. These parts contain essential air
bag components. The air bag could accidentally activate and cause serious injuries.
Always have an Authorized Mazda Dealer remove these parts.
Dispose of the air bag properly:
Improper disposal of an air bag or a vehicle with live air bags in it can be extremely
dangerous. Unless all safety procedures are followed, injury can result. Ask an
Authorized Mazda Dealer how to safely dispose of an air bag or how to scrap an air
bag equipped vehicle.
NOTE
If it becomes necessary to have the components or wiring system for the supplementary restraint
system modified to accommodate a person with certain medical conditions in accordance with a
certified physician, contact an Authorized Mazda Dealer, refer to Customer Assistance (U.S.A.)
(page 9-2).
2-59
Form No.8AS3-EA-09E
2-60
Form No.8AS3-EA-09E
Knowing Your Mazda

Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
Advanced Keyless Entry and Start System ................................ 3-2

Advanced Keys ...................................................................... 3-2
Operation Using Advanced Keyless Functions ......................... 3-7
Operation Using Advanced Key Functions ............................. 3-15
Advanced Key Suspend Function ........................................... 3-19
Warning Lights and Beep Sounds ........................................... 3-20
When Warning Indicator/Beep is Activated ............................ 3-23
Doors and Locks .........................................................................
Keys ........................................................................................
Keyless Entry System ..........................................................
Door Locks .............................................................................
Trunk Lid ................................................................................
Inside Trunk Release Lever .....................................................
Power Windows ......................................................................
Fuel-Filler Lid and Cap ...........................................................
Hood .......................................................................................
Moonroof .............................................................................
3-24
3-24
3-25
3-32
3-35
3-38
3-40
3-47
3-48
3-49
Security System ...........................................................................

Immobilizer System (with Advanced Key) .............................
Immobilizer System (without Advanced Key) ........................
Theft-Deterrent System ........................................................
3-52
3-52
3-56
3-60
Steering Wheel and Mirrors ...................................................... 3-63

Steering Wheel ........................................................................ 3-63
Mirrors .................................................................................... 3-63
Some models.
Form No.8AS3-EA-09E
3-1
Knowing Your Mazda
Advanced Keyless Entry and Start System

Advanced Keys
The advanced keyless functions (advanced keyless entry and start system) enables the
following operations while the advanced key is being carried (page 3-7).
l Locking/unlocking the doors, and opening the trunk lid, without operating the key.
l Starting the engine without operating the key.
Additional functions are available using the buttons on the advanced key.
Refer to Operation Using Advanced Key Functions on page 3-15.
l The following operations are possible using the transmitter of the keyless entry system
from a distance (Lock/Unlock/Trunk/Panic button):
Locking/unlocking the doors.
Opening the trunk lid.
Opening the power windows and the moonroof .
Operating the theft-deterrent system .
Turning on the alarm.
l Locking/unlocking the doors or starting the engine using the auxiliary key.
l
l
l
l
l
WARNING
Do not leave the key in your vehicle with children and keep them in a place where
your children will not find or play with them:
Leaving children in a vehicle with the key is dangerous. This could result in someone
being badly injured or even killed. Children may find these new kinds of keys to be
an interesting toy to play with and could cause the power windows or other controls
to operate, or even make the vehicle move.
Radio waves from the advanced key may affect medical equipment such as
pacemakers:
Before using the advanced key near people who use medical equipment, ask the
medical equipment manufacturer or your physician if radio waves from the
advanced key will affect the equipment.
NOTE
l
l
l
The driver must carry the advanced key to ensure the system functions properly.
Refer to Immobilizer System (page 3-52) for information regarding keys and engine starting.
(With theft-deterrent system)
Refer to Theft-Deterrent System (page 3-60) for information regarding keys and the prevention of
vehicle and vehicle contents theft.
The advanced keyless functions can be turned off.
Refer to Personalization Features on page 10-8.
3-2
Some models.
Form No.8AS3-EA-09E
Knowing Your Mazda
Lock button
Unlock button
Trunk button
Panic button
Operation indicator light
Auxiliary key
Key code number plate
A code number is stamped on the plate attached to the key set; detach this plate and store it
in a safe place (not in the vehicle) for use if you need to make a replacement key.
Also write down the code number and keep it in another safe and handy place, but not in
the vehicle.
If your key is lost, consult your Authorized Mazda Dealer with the code number ready.
3-3
Form No.8AS3-EA-09E
Knowing Your Mazda

CAUTION
Because the advanced key uses low-intensity radio waves, it may not function
correctly under the following conditions:
The advanced key is carried with communication devices such as cellular
phones.
The advanced key contacts or is covered by a metal object.
The advanced key is near electronic devices such as personal computers or cell
phones.
Non-Mazda genuine electronic equipment is installed in the vehicle.
There is equipment which discharges radio waves near the vehicle.
If the vehicle is near equipment such as wireless pay devices installed at certain
gas stations.
The advanced key may consume battery power excessively if it receives highintensity radio waves. Do not place the advanced key near electronic devices such
as televisions or personal computers.
To avoid damage to the advanced key, DO NOT:
Drop the advanced key.
Get the advanced key wet.
Disassemble the advanced key.
Expose the advanced key to high temperatures on places such as the
dashboard or hood, under direct sunlight.
Place heavy objects on the advanced key.
Put the advanced key in an ultrasonic cleaner.
Put any magnetized objects close to the advanced key.
NOTE
l
Battery life is about one year. Be sure to replace the battery as soon as you see the green KEY
indicator light in the instrument cluster begin flashing for 30 seconds after turning off the engine,
otherwise, you will not be able to start the engine using the advanced keyless start system once the
battery is completely dead Refer to KEY warning light (red) on page 5-53. If this occurs, you will
have to either force-start the engine or use the auxiliary key Refer to Advanced Key Battery Dead
Warning on page 3-21.
Additional advanced keys can be obtained at an Authorized Mazda Dealer. Up to 6 advanced keys
can be used with the advanced keyless functions per vehicle.
3-4
Form No.8AS3-EA-09E
Knowing Your Mazda

qAdvanced Key Maintenance
CAUTION
Make sure the battery is installed
with the correct pole facing
upward. Battery leakage could
occur if it is not installed correctly.
When replacing the battery, be
careful not to bend the electrical
terminals or get oil on them. Also
be careful not to get dirt in the
transmitter as it could be
damaged.
There is the danger of explosion if
the battery is not correctly
replaced.
Replace only with the same type
battery (CR2025 or equivalent).
Dispose of used batteries
according to the following
instructions.
Insulate the plus and minus
terminals of the battery using
cellophane or equivalent tape.
Never disassemble.
Never throw the battery into
fire or water.
Never deform or crush.
Replacing the battery at an Authorized

Mazda Dealer is recommended to prevent
damage to the advanced key. If replacing
the battery by yourself, follow the
instruction below.
Replacing the advanced key battery
1. Pull out the auxiliary key.
2. Gently and slowly pry open the cover

using a small flathead screwdriver.
The following conditions indicate that the

battery power is low:
l The KEY indicator light (green) flashes
in the instrument cluster for about 30
seconds after the engine is turned off.
l The system does not operate and the
operation indicator light on the
transmitter does not flash when the
buttons are pressed.
l The system's operational range is
reduced.
3-5
Form No.8AS3-EA-09E
Knowing Your Mazda

3. Remove the battery by pressing its
edge.
qService
If you have a problem with the advanced
keyless functions, consult an Authorized
Mazda Dealer.
If your advanced key is lost or stolen,
bring all remaining advanced keys to an
possible for a replacement and to make
the lost or stolen advanced key
inoperative.
CAUTION
4. Install a new battery (CR2025 or
equivalent) with the positive pole
facing down.
5. Close the cover.

6. Reinsert the auxiliary key.
3-6
Form No.8AS3-EA-09E
Radio equipment like this is governed

by laws in the United States.
Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
Knowing Your Mazda

Operation Using Advanced
Keyless Functions
qOperational Range
Opening the trunk lid

The operational range for opening the
trunk lid is an area of up to 80 cm (2.6 ft)
from the center of the trunk lid.
Exterior transmitter
The system operates only when the driver

is in the vehicle or within operational
range while the advanced key is being
carried.
NOTE
When the battery power is low, or in places
where there are high-intensity radio waves or
noise, the operational range may become
narrower or the system may not operate.
Operational range
Locking, unlocking the doors

The operational range for locking/
unlocking the doors is an area of up to 80
cm (2.6 ft) from the center of the front
door handles.
Exterior transmitter
Operational range
Starting the engine

The operational range for starting the
engine includes nearly the entire cabin
area.
Interior transmitter
Operational range
NOTE
The system may not operate if you are too
close to the windows, door handles.
3-7
Form No.8AS3-EA-09E
Knowing Your Mazda

NOTE
l
The trunk is out of the operational range,

however, starting the engine may be
possible.
The engine may not start if the advanced
key is placed in the following areas:
Around the dashboard
In the storage compartments such as the
glove box
On the rear parcel shelf
Starting the engine may be possible even if
the advanced key is outside of the vehicle
and extremely close to a door and window,
however, always start the engine from the
driver's seat.
If the vehicle is started and driven away
while the advanced key is not in the vehicle,
the vehicle will not restart after it is turned
off and the push button start will switch off.
If the advanced key is detected within
operational range, the operation indicator
light on the transmitter flashes
momentarily.
NOTE
l
qLocking, Unlocking Doors

To lock
All the doors can be locked by pressing
the request switch on either front door
A beep sound will be heard once and the
hazard warning lights will flash once.
Request switch
3-8
Form No.8AS3-EA-09E
The request switch on driver's door can be

used to close the power windows, refer to
Opening/Closing Power Windows from
Outside (page 3-43).
Confirm that all the doors are securely
locked.
All the doors cannot be locked when any
door is open.
If your vehicle has a theft-deterrent system,
the hazard warning lights only flash when
the system is armed.
Refer to the theft-deterrent system on page
3-60.
A beep sound is heard for confirmation
when the doors are locked using the request
switch. If you prefer, the beep sound can be
turned off.
The volume of the beep sound can also be
changed.
Refer to Personalization Features on page
10-8.
The setting can be changed so that the
doors are locked automatically without
pressing the request switch when walking
away from the vehicle (page 10-8).
(Auto-lock function)
Three seconds after the doors and the trunk
lid are closed and the advanced key is out
of the operational range, the doors will lock
automatically. Also, the hazard warning
lights flash once. (Even if the driver is in
the operational range, all doors are locked
automatically after about 30 seconds.)
If you are out of the operational range
before the doors are completely closed or
another advanced key is left in the vehicle,
the auto-lock function will not work.
Always make sure that all doors are closed
and locked before leaving the vehicle.
The auto-lock function does not close the
power windows or moonroof.
Knowing Your Mazda

To unlock
Driver's door handle

To unlock the driver's door, touch the
sensor area on the inside of the driver's
door handle. A beep sound will be heard
twice and the hazard warning lights will
flash twice.
After unlocking the driver's door, unlock
all the other doors by pressing the doorlock switch on the inside of the driver's
door.
Front passenger door handle
To unlock the doors, touch the sensor area
on the inside of a front passenger door
handle. A beep sound will be heard twice
and the hazard warning lights will flash
twice.
NOTE
l
The doors cannot be unlocked for about

three seconds after they are locked even if
the sensor area on the inside of either front
door handle is touched.
Grasp either front door handle properly to
unlock the doors, and make sure it is
unlocked before opening it.
If the door handle is pulled before the door
is unlocked, the door may not open. If this
happens, lock the door and securely grasp
the door handle again to confirm that the
door is unlocked, then open the door.
The sensor is installed on the inside of the

front door handles. The doors cannot be
unlocked by touching any area other than
the sensor area.
If you grasp a front door handle while
wearing gloves, the doors may not unlock,
or they could require extra time to unlock.
The doors could unlock if someone is
carrying the advanced key near the front
door handle and the front door handle is
splashed with water such as by rain, or by
a car wash.
If your vehicle has a theft-deterrent system,
the hazard warning lights only flash when
the system is turned off.
3-60.
The method for unlocking the doors can be
changed.
10-8.
A beep sound is heard for confirmation
when the doors are unlocked using a door
handle. If you prefer, the beep sound can be
turned off.
The volume of the beep sound can also be
adjusted.
10-8.
(Auto re-lock function)
After unlocking the doors using the sensor
on the inside of the door handle, all the
doors will automatically lock if any of the
following operations are not done within
about 30 seconds. If your vehicle has a
theft-deterrent system, the hazard warning
lights will flash for confirmation.
A door or the trunk lid is opened.
The auxiliary key is inserted into the key
slot.
The push button start is in any position
except off position.
l
l
3-9
Form No.8AS3-EA-09E
Knowing Your Mazda

l
It may require a few seconds for the doors

to unlock after touching the sensor area on
the inside of either front door handle.
qOpening the Trunk Lid with

Request Switch
The trunk lid can be opened by pressing
the request switch on the under side of the
trunk lid above the license plate while the
Request switch
qStarting the Engine

Locking, unlocking the steering wheel
The steering wheel is locked if a door is
opened/closed/locked after the power is
turned off using the push button start
while the vehicle is stopped.
This is an automatic safety device to
protect the vehicle against theft.
The steering wheel can be unlocked by
pressing the push button start.
If the electronic steering lock warning
light is flashing and the beep sound is
heard, this indicates that the steering
wheel is not unlocked. To unlock the
steering wheel, jiggle the steering wheel
from side to side while pressing the push
button start.
Ignition positions
NOTE
l
If the advanced key is left in the trunk, the

trunk lid will close, however, the trunk lid
can be opened using the request switch and
the vehicle could be stolen.
While the ignition is switched ON, the trunk
lid can be opened only when the vehicle is
stopped with the parking brake applied
(manual transaxle) or with the selector
lever in the P position (automatic
transaxle).
3-10
Form No.8AS3-EA-09E
Each time the push button start is pressed,

the ignition switches in the order of off,
ACC, and ON. Pressing the push button
start again from ON switches the ignition
off.
Indicator light
Indicator
light (ACC)
Indicator
light (ON)
Knowing Your Mazda

NOTE
l
The order in which the ignition is switched

can be changed.
10-8.
The engine starts by pressing the push
button start while depressing the clutch
pedal (manual transaxle) or the brake
pedal (automatic transaxle). To switch the
ignition position, press the push button start
without depressing the pedal.
Do not leave the ignition switched ON
while the engine is not running. Doing so
could result in the battery going dead. If the
ignition is left in ACC (For automatic
transaxle, the shift lever is in the P position,
and the ignition is in ACC), the ignition
switches off automatically after one hour.
The setting can be changed to not switch
the ignition off automatically.
10-8.
Off
The steering wheel locks to help protect
against theft. Also, the power supply to
electrical devices is turned off.
The push button start indicator lights
(ACC and ON) turn off.
WARNING
Before leaving the driver's seat, always
switch the ignition off, set the parking
brake, and make sure the shift lever is
in P (automatic transaxle) or in 1st gear
or R (manual transaxle):
Leaving the driver's seat without
switching off the ignition, setting the
parking brake, and shifting the shift
lever to P (automatic transaxle) or to
1st gear or R (manual transaxle) is
dangerous. Unexpected vehicle
movement could occur which could
result in an accident.
In addition, if your intention is to
leave the vehicle for even a short
period, it is important to switch the
ignition off, as leaving it in another
position will disable some of the
vehicle's security systems and run the
battery down.
ACC (Accessory)
The steering wheel unlocks and some
electrical accessories will operate.
The indicator light (ACC) illuminates.
NOTE
The advanced keyless entry system does not
function while the push button start has been
pressed to ACC, and the doors will not lock/
unlock even if they have been locked manually.
ON
This is the normal running position after
the engine is started. The indicator light
(ON) turns off. (The indicator light (ON)
illuminates when the ignition is switched
ON and the engine is not running.)
The warning lights (except brakes) should
be inspected before the engine is started
(page 5-43).
3-11
Form No.8AS3-EA-09E
Knowing Your Mazda

NOTE
NOTE
(With headlight auto-leveling)

When the push button start is pressed to the
ON position, the sound of the headlight
leveling motors operating at the front of the
engine compartment can be heard. This does
not indicate an abnormality.
(Manual transaxle)
The starter will not operate if the clutch pedal
is not depressed sufficiently.
(Automatic transaxle)
The starter will not operate if the shift lever is
not in P or N and the brake pedal is not
depressed sufficiently.
Starting the engine

NOTE
l
The advanced key must be carried because

the advanced key carries an immobilizer
chip that must communicate with the engine
controls at short range.
The engine can be started when the push
button start is pressed from off, ACC, or
ON.
1. Make sure you are carrying the

advanced key.
6. Verify that the KEY indicator light

(green) in the instrument cluster and
the push button start indicator light
(green) illuminate. If the KEY indicator
light (green) does not illuminate, make
sure that the advanced key is being
carried. If the KEY indicator light
(green) does not illuminate while the
advanced key is being carried, you may
have to use the auxiliary key to start
the engine instead (page 3-23).
2. Occupants should fasten their seat

belts.
3. Make sure the parking brake is on.
4. Continue to press the brake pedal
firmly until the engine has completely
started.
5. (Manual transaxle)
Continue to press the clutch pedal
firmly until the engine has completely
started.
Put the vehicle in park (P). If you must
restart the engine while the vehicle is
moving, shift into neutral (N).
3-12
Form No.8AS3-EA-09E
CAUTION
If the KEY warning light (red)
illuminates, and the push button
start indicator light (red) illuminates,
this could indicate a problem with
the engine starting system and the
inability to start the engine or switch
the ignition to ACC or ON. Have your
vehicle inspected at an Authorized
Knowing Your Mazda

NOTE
l
Under the following conditions, the KEY

warning light (red) flashes to inform the
driver that the push button start will not
switch to ACC even if it is pressed from off.
The advanced key battery is dead.
The advanced key is out of operational
range.
The advanced key is placed in areas
where it is difficult for the system to
detect the signal (page 3-7).
A key from another manufacturer similar
to the advanced key is in the operational
range.
(Forced engine starting method)
If the KEY warning light (red) illuminates,
and the push button start indicator light
(red) flashes, this could indicate a problem
with the engine starting system. Have your
vehicle inspected at an Authorized Mazda
Dealer as soon as possible. If this occurs,
the engine can be force-started. Press and
hold the push button start until the engine
starts. Other procedures necessary for
starting the engine such as having the
advanced key in the cabin, and depressing
the brake pedal (Automatic transaxle) or
the clutch pedal (Manual transaxle) are
required.
When the engine is force-started, the key
warning light (red) remains illuminated and
the key indicator light (green) does not
illuminate.
If the attempt to start the engine using the
forced-start method is unsuccessful, it may
be necessary to use the auxiliary key.
NOTE
l
l
l
7. Press the push button start after the

KEY indicator light (green) in the
instrument cluster, and the push button
start indicator light (green) illuminate.
After starting the engine, the push button

start indicator lights (ACC and ON) turn
off and the ignition is in the ON position.
After pressing the push button start and
before the engine starts, the operation
sound of the fuel pump motor from near the
fuel tank can be heard, however, this does
not indicate a malfunction.
(With headlight auto-leveling)
After pressing the push button start and
before the engine starts, the operation
sound of the headlight leveling motors
operating at the front of the engine
compartment can be heard, however, this
does not indicate a malfunction.
8. After starting the engine, let it idle for

about ten seconds.
NOTE
l
Whether the engine is cold or warm, it

should be started without the use of the
accelerator.
If the engine does not start the first time,
refer to Starting a Flooded Engine under
Emergency Starting. If the engine still does
not start, have your vehicle inspected by an
Authorized Mazda Dealer (page 7-13).
Starting the engine using the auxiliary

key
If the engine cannot be started for reasons
such as the advanced key battery is dead
or the engine cannot be started using the
forced-start method, the engine can be
started using the auxiliary key.
1. Slide the auxiliary key out from the
bottom of the advanced key.
2. Use the auxiliary key to remove the
key slot cover.
3-13
Form No.8AS3-EA-09E
Knowing Your Mazda

3. Depress the clutch (manual transaxle)
or brake pedal (automatic transaxle)
until the ring around the key slot starts
flashing.
NOTE
l
4. Insert the auxiliary key into the slot

while it is flashing, but DO NOT
TURN THE AUXILIARY KEY IN
THE SLOT.
l
Leave the auxiliary key in the key slot while

the engine is running.
When leaving the vehicle, remove the
auxiliary key from the key slot and the
vehicle.
A thief does not need your advanced key to
steal the vehicle if the thief has your
auxiliary key.
To switch the ignition position, insert the
auxiliary key into the key slot, depress the
clutch pedal (manual transaxle) or the
brake pedal (automatic transaxle), and then
press the push button start right after
releasing the pedal.
Turning off the engine

1. Stop the vehicle completely.
CAUTION
After inserting the auxiliary key, do
not attempt to turn it in the key slot.
It could damage the vehicle or the
auxiliary key.
5. Press the push button start to start the
engine.
3-14
Form No.8AS3-EA-09E
Shift into neutral.
Shift the shift lever to the P position.
3. Press the push button start to turn off
the engine.
CAUTION
When leaving the vehicle, make sure
the push button start is pressed to
off.
Knowing Your Mazda

NOTE
l
When the push button start is pressed to off

from ON, the KEY indicator light (green)
flashes for approximately 30 seconds
indicating that the remaining battery power
of the advanced key is low. Replace with a
new battery before the advanced key
becomes unusable.
Refer to Advanced Key Maintenance (page
3-5)
If the engine is turned off while the shift
lever is in a position other than P, the
ignition switches to ACC.
Operation Using Advanced

Key Functions
qKeyless Entry System
This system uses the more traditional
keyless entry buttons to remotely lock and
unlock the doors and opens the trunk lid,
and opens the power windows and the
moonroof.
It can also help you signal for attention.
Press the buttons slowly and carefully.
NOTE
l
Emergency engine stop

Continuously pressing the push button
start while the engine is running and the
vehicle is stopped, or quickly pressing it
any number of times will stop turn the
engine off immediately.
CAUTION
Other than an emergency situation,
do not attempt to stop the engine
while driving the vehicle.
The keyless entry system is designed to

operate up to about 2.5 m (8 ft) from the
center of the vehicle, but this may vary due
to local conditions.
The system does not operate when the
auxiliary key is in the key slot.
The keyless entry system is fully operational
when the push button start is switched off.
The system does not operate if the push
button start is switched to any position
other than off.
All doors cannot be locked by pressing the
lock button while any door is open. The
hazard warning lights will also not flash.
If the transmitter does not operate when
pressing a button or the operational range
becomes too small, the battery may be
dead. To install a new battery, refer to
Maintenance (page 3-5).
3-15
Form No.8AS3-EA-09E
Knowing Your Mazda

NOTE
Transmitter
Lock button
Operation indicator light
Unlock button
Trunk button
Panic button
NOTE
The unlock button can be used to open the
power windows and the moonroof, but the lock
button cannot be used to close the power
windows and the moonroof.
Refer to the following pages:
Opening/Closing the Power Windows (page
3-43)
Opening/Closing the Moonroof (page 3-51)
The operation indicator light flashes when

the buttons are pressed.
Lock button
To lock the doors, press the lock button. A
beep sound will be heard once and the
hazard warning lights will flash once.
To confirm that all doors have been
locked, press the lock button again within
5 seconds. If they are closed and locked,
the horn will sound.
The system can be set not to sound the
horn.
10-8.
3-16
Form No.8AS3-EA-09E
A beep sound can be heard for confirmation

when the doors are locked using the
advanced keyless transmitter. If you prefer,
the beep sound can be turned off. The
volume of the beep sound can be changed.
10-8.
(Without theft-deterrent system)
The hazard warning lights will flash once
to indicate that all doors are locked.
The hazard warning lights flash when the
theft deterrent system is armed.
The hazard warning lights do not flash if all
the doors are locked before the theftdeterrent system is properly armed.
When the doors are locked by pressing the
lock button on the transmitter while the
theft-deterrent system is armed, the hazard
warning lights will flash once to indicate
that the system is armed.
3-60.
NOTE
l
All doors cannot be locked when any door

is open.
Confirm that all doors are locked visually
or audibly by use of the double click.
Unlock button
To unlock the driver's door, press the
unlock button. A beep will be heard twice
and the hazard warning lights will flash
twice.
To unlock all doors, press the unlock
button again within 3 seconds and two
more beep sounds will be heard.
Knowing Your Mazda

NOTE
l
A beep sound can be heard for confirmation

when the doors are locked using the
advanced keyless transmitter. If you prefer,
the beep sound can be turned off. The
volume of the beep sound can be changed.
10-8.
The system can be set to unlock all doors by
performing a single operation.
10-8.
The hazard warning lights will flash twice
to indicate that all doors are unlocked.
theft deterrent system is turned off.
The hazard warning lights do not flash
unless the theft deterrent system has been
properly turned off.
When the doors are unlocked by pressing
the unlock button on the transmitter while
the theft-deterrent system is turned off, the
hazard warning lights will flash twice to
indicate that the system is turned off.
3-60.
Trunk button
To open the trunk, press and hold the
trunk button until the trunk lid opens.
NOTE
To open the trunk when the ignition is switched
to a position other than off, use the remote
release button inside the vehicle (page 3-36).
Panic button
If you witness from a distance someone
attempting to break into or damage your
vehicle, pressing the panic button will
activate the vehicle's alarm.
NOTE
The panic button will work whether any door
or the trunk lid is open or closed.
(Turning on the alarm)

Pressing the panic button for 1 second or
more will trigger the alarm for about 2
minutes and 30 seconds, and the
following will occur:
l The horn sounds intermittently.
l The hazard warning lights flash.
NOTE
However, if the driver is too close to the
vehicle the panic button may not function.
NOTE
(Auto re-lock function)
After unlocking with the transmitter, All doors
will automatically lock if any of the following
operations are not performed within about 30
seconds. If your vehicle has a theft-deterrent
system, the hazard warning lights will flash for
confirmation.
l A door or the trunk lid is opened.
l The auxiliary key is inserted into the key
slot.
l The push button start is in any position
except off position.
(Turning off the alarm)

The alarm stops by pressing any button on
the transmitter.
3-17
Form No.8AS3-EA-09E
Knowing Your Mazda

Declaration of Conformity
Keyless entry system
3-18
Form No.8AS3-EA-09E
Knowing Your Mazda

qAuxiliary Key Function
Use the auxiliary key stored in the
advanced key in the event of a dead
transmitter battery or malfunction.
Removing the auxiliary key
Pull out the auxiliary key from the
advanced key.
Locking, unlocking the doors

The doors can be locked/unlocked using
the auxiliary key, refer to Locking,
Unlocking with Key (page 3-32).
Advanced Key Suspend

Function
If an advanced key is left in the vehicle,
the functions of the advanced key left in
the vehicle are temporarily suspended to
prevent theft of the vehicle.
The following are inoperable:
l Starting the engine using the push
button start.
l Operating the request switches.
To restore these functions, perform any
one of the following:
l Press a switch on the advanced key
which has had its functions temporarily
suspended.
l (Manual transaxle)
When carrying another advanced key,
depress the clutch pedal until the KEY
indicator light (green) illuminates.
When carrying another advanced key,
depress the brake pedal until the KEY
indicator light (green) illuminates.
Starting the engine

The engine can be started with the
auxiliary key, refer to Starting the engine
(page 3-10).
Locking, unlocking the glove box
The glove box can be locked/unlocked
using the auxiliary key, refer to Glove
Box (page 6-151).
3-19
Form No.8AS3-EA-09E
Knowing Your Mazda

Warning Lights and Beep
Sounds
qSystem Malfunction Warning Light
If any malfunction occurs in the advanced
keyless function, the KEY warning light
(red) in the instrument cluster illuminates
continuously.
CAUTION
If the KEY warning light (red) remains
illuminated, do not continue to drive
the vehicle with the advanced keyless
function. Park the vehicle in a safe
place and use the auxiliary key to
continue driving the vehicle. Have the
vehicle inspected at an Authorized
Refer to Starting the engine (page
3-10).
qIgnition Not Switched Off

(STOP) Warning Beep
If the driver's door is opened while the
ignition is switched to ACC, a continuous
beep sound will be heard to notify the
driver that the ignition has not been
switched off (STOP). Left in this
condition, the keyless entry system will
not operate, the car cannot be locked, and
the battery power will be depleted.
3-20
Form No.8AS3-EA-09E
qAdvanced Key Removed from

Vehicle Warning Beep
Under the following conditions, a beep
sound will be heard and the KEY warning
light (red) will flash continuously when
the push button start has not been
switched off to notify the driver that the
advanced key has been removed. The
KEY warning light (red) will stop flashing
when the advanced key is back inside the
vehicle:
l The push button start has not been
switched off, the driver's door is open,
and the advanced key is removed from
the vehicle. (A beep sound will be
heard 3 times.)
However the beep sound will be heard
continuously when the push button
start is switched to ACC and the door
is open due to the activation of the
warning beep sound indicating that the
push button start is not switched off.
switched off and all the doors are
closed after removing the advanced
key from the vehicle. (A beep sound
will be heard 6 times. The volume of
the beep sound can be changed.)
Refer to Personalization Features on
page 10-8.
NOTE
Because the advanced key utilizes low-intensity
radio waves, the Advanced Key Removed From
Vehicle Warning may activate if the advanced
key is carried together with a metal object or it
is placed in a poor signal reception area
within the vehicle.
Knowing Your Mazda

qRequest Switch Inoperable
Warning Beep
If the request switch for a front door is
pressed under the following conditions
while the advanced key is being carried, a
beep will be heard 6 times to indicate that
the front doors cannot be locked.
l A door is open (door ajar included).
switched to off.
l The auxiliary key is inserted into the
key slot.
qAdvanced Key Battery Dead

Warning
When the push button start is pressed off
indicating that the remaining battery
power is low. Replace with a new battery
before the advanced key becomes
unusable.
Refer to Advanced Key Maintenance
(page 3-5).
NOTE
The advanced key can be set so that the KEY
indicator light (green) does not flash even if
the battery power is low.
10-8.

A key from another manufacturer
similar to the advanced key is in the
operational range.
qAdvanced Key Left-in-trunk

Warning Beep
If the advanced key is left in the trunk
compartment with all doors locked and
the trunk lid closed, a beep sound is heard
for about 10 seconds to remind the driver
the advanced key has been left in the
trunk compartment. If this happens, open
the trunk lid by pressing the request
switch and remove the advanced key. An
advanced key removed from the trunk
may not function because its functions
may have been temporarily suspended. To
restore the advanced key function,
perform the applicable procedure (page
3-19).
The system can be set not to open the
trunk.
10-8.
qEngine Start Not Permitted Warning

Under the following conditions, the KEY
warning light (red) flashes to inform the
driver that the push button start will not
switch to ACC even if it is switched from
off.
l The advanced key battery is dead.
l The advanced key is not within
operational range.
3-21
Form No.8AS3-EA-09E
Knowing Your Mazda

qAdvanced Key Left-in-vehicle
Warning Beep
If an advanced key is left in the vehicle
cabin and all the doors are locked using a
separate advanced key, a beep sound is
heard for about 10 seconds to remind the
driver that the advanced key has been left
in the vehicle cabin. If this happens, the
doors lock but the functions of the
advanced key left in the vehicle cabin
may be temporarily suspended. Perform
the following procedure to restore the
functions of the advanced key (page
3-19).
The volume of the beep sound can be
changed.
10-8.
NOTE
The warning beep does not sound while the
trunk is open. The warning beep sounds after
the trunk is closed.
qAuxiliary Key Removed Warning

Beep
If the auxiliary key is removed under the
following conditions while it is in use and
in the ACC or ON position, the warning
beep sounds three times.
l The advanced key is not in the vehicle.
l The battery for the advanced key is
dead.
3-22
Form No.8AS3-EA-09E
Knowing Your Mazda

When Warning Indicator/Beep is Activated
Under the following conditions, warning beeps are heard and a warning/indicator light in
the instrument cluster illuminates to notify the driver of improper operation of the
advanced key to prevent theft of the vehicle (page 3-20).
Warning
When a door is open, a continuous beep sound will be
heard.
When a door is open, 3 beep sounds are heard, and the
KEY warning light (red) in the instrument cluster
flashes.
When a door is closed, a beep sound is heard 6 times,
and the KEY warning light (red) in the instrument
cluster flashes.
When locking the doors or closing the trunk, the chime
sounds for about ten seconds.
How to check
Check whether the push button start has been switched
off.
Check whether the advanced key has been removed
from the vehicle.
Check whether the advanced key has been removed
from the vehicle.
Check whether the advanced key has been left in the

vehicle or the trunk.
Check whether the push button start has been switched
When attempting to lock the doors by pressing the
request switch on the front doors, and six beep sounds off.
are heard.
Check whether a door is open.
The advanced key battery power is low. Replace the
When the KEY indicator light (green) flashes in the
battery with a new one.
instrument cluster.
Refer to Advanced Key Maintenance on page 3-5.
The advanced key is malfunctioning. Park the vehicle in
When the KEY warning light (red) remains illuminated a safe place, and use the auxiliary key to continue
in the instrument cluster.
driving the vehicle. Have the vehicle inspected at an
Authorized Mazda Dealer as soon as possible.
3-23
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

Without keyless entry system
Keys
WARNING
play with them:
killed. Children may find these new
kinds of keys to be an interesting toy
to play with and could cause the
power windows or other controls to
operate, or even make the vehicle
move.
NOTE
l
Refer to Immobilizer System (page 3-56) for

information regarding keys and engine
starting.
Refer to Theft-Deterrent System (page 3-60)
for information regarding keys and the
prevention of vehicle and vehicle contents
theft.
The keys operate all locks.

With keyless entry system
A code number is stamped on the plate

attached to the key set; detach this plate
and store it in a safe place (not in the
vehicle) for use if you need to make a
replacement key.
NOTE
l
Write down the code number and keep it in

a separate safe and convenient place, but
not in the vehicle.
If your key is lost, consult your Authorized
Mazda Dealer and have your code number
ready.
Some types of key chains cannot be
attached to the retractable type key. In this
case, use the key ring provided with the
transmitter which has the key code number
plate attached.
Retractable
type key

Key ring
3-24
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

Key extend/retract method (Retractable
type key)
To extend the key, press the release
button.
Keyless Entry System

This system remotely locks and unlocks
the doors and opens the trunk lid, and
opens the power windows and the
moonroof.
It can also help you signal for attention.
Operating the theft-deterrent system with
the keyless entry system transmitter is
also possible on theft-deterrent systemequipped vehicles.
Press the buttons slowly and carefully.
CAUTION
To retract the key, rotate it into the holder
while pressing the release button.
To avoid damage to the transmitter,

do not:
Drop the transmitter.
Get the transmitter wet.
Disassemble the transmitter.
Expose the transmitter to any kind
of magnetic field.
Expose the transmitter to high
temperatures on places such as
the dashboard or hood, under
direct sunlight.
Some models.
Form No.8AS3-EA-09E
3-25
Knowing Your Mazda
Doors and Locks

NOTE
l
The keyless entry system is designed to

operate up to about 2.5 m (8 ft) from the
center of the vehicle, but this may vary due
to local conditions.
The system does not operate when the key is
in the ignition switch.
Doors can be locked by pressing the lock
button while any other door is open.
However, the hazard warning lights will not
flash and the horn will not sound.
If the transmitter does not operate when
pressing a button or the operation range
becomes too small, the battery may be
dead. To install a new battery, refer to
Maintenance (page 3-29).
Additional transmitters can be obtained at
an Authorized Mazda Dealer. Up to 3
transmitters can be used with the keyless
entry system per vehicle. Bring all
transmitters to an Authorized Mazda
Dealer when additional transmitters are
required.
qTransmitter
Lock button
Unlock button
Panic button
Operation
indicator light
Trunk button
NOTE
The unlock button can be used to open the
power windows and the moonroof, but the lock
button cannot be used to close the power
windows and the moonroof.
Refer to the following pages:
Opening/Closing the Power Windows (page
3-43)
Opening/Closing the Moonroof (page 3-51)
The operation indicator light flashes when

the buttons are pressed.
Lock button
To lock the doors, press the lock button.
To confirm that all doors have been
locked, press the lock button again within
5 seconds. If they are closed and locked,
the horn will sound.
The system can be set not to sound the
horn.
10-8.
3-26
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

NOTE
l
Pressing the transmitter lock button to lock

the doors while any door is open does not
sound the horn.
The hazard warning lights will flash once
to indicate that all doors are locked.
theft deterrent system is armed.
The hazard warning lights do not flash if all
the doors are locked before the theftdeterrent system is properly armed.
lock button on the transmitter while the
theft-deterrent system is armed, the hazard
warning lights will flash once to indicate
that the system is armed.
3-60.
NOTE
l
All doors cannot be locked when the key is

in the ignition switch.
Confirm that all doors are locked visually
or audibly by use of the double click.
Unlock button
To unlock the driver's door, press the
unlock button.
To unlock all doors, press the unlock
button again within 5 seconds.
NOTE
The hazard warning lights will flash twice to
indicate that all doors are unlocked.
The hazard warning lights flash when the theft
deterrent system is turned off.
The hazard warning lights do not flash unless
the theft deterrent system has been properly
turned off.
When the doors are unlocked by pressing the
unlock button on the transmitter while the
theft-deterrent system is turned off, the hazard
warning lights will flash twice to indicate that
the system is turned off.
3-60.
10-8.
NOTE
Auto re-lock function
After unlocking with the transmitter, all doors
will automatically lock if one of the doors or
the trunk lid is not opened within about 30
seconds.
The time required for the doors to lock
automatically can be changed.
10-8.
Trunk button
To open the trunk, press and hold the
trunk button until the trunk lid opens.
NOTE
To open the trunk when the ignition is switched
to a position other than off, use the remote
release button inside the vehicle (page 3-36).
3-27
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

Panic button
If you witness from a distance someone
attempting to break into or damage your
vehicle, pressing the panic button will
activate the vehicle's alarm.
NOTE
The panic button will work whether any door
or the trunk lid is open or closed.
Turning on the alarm

Pressing the panic button for 1 second or
more will trigger the alarm for about 2
minutes and 30 seconds, and the
following will occur:
l The horn sounds intermittently.
l The hazard warning lights flash.
Turning off the alarm
Press any button on the transmitter.
3-28
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

qTransmitter Maintenance
If the buttons on the transmitter are
inoperable and the operation indicator
light does not flash, the battery may be
dead.
Replace with a new battery before the
transmitter becomes unusable.
2. Insert a screwdriver into the slot and

push the tab to remove the key from
the transmitter.
Tab
CAUTION
Install the battery with the positive
pole ( ) facing down. Battery
leakage could occur if it is not
installed correctly.
When replacing the battery, be
careful not to bend the electrical
terminals or get oil on them. Also
be careful not to get dirt in the
transmitter as it could be
damaged.
There is the danger of explosion if
the battery is not correctly
replaced.
Replace only with the same type
battery (CR1620 or equivalent).
Dispose of used batteries
according to the following
instructions.
Insulate the plus and minus
terminals of the battery using
cellophane or equivalent tape.
Never disassemble.
Never throw the battery into
fire and/or water.
Never deform or crush.
3. Insert a screwdriver into the slot and

gently pry open the transmitter.
4. Remove the battery.
Replacing the transmitter battery

1. Unfold the key (page 3-24).
3-29
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

5. Put in the new battery (CR1620 or
equivalent) with the positive pole (
facing down.
qService
If you have a problem with the keyless
entry system, consult an Authorized
Mazda Dealer.
If your transmitter is lost or stolen, bring
all remaining transmitters to an
possible for a replacement and to make
the lost or stolen transmitter inoperative.
CAUTION
6. Align the front and back covers and
snap the transmitter shut.
7. Align the key with the transmitter as
shown in the figure, and insert the key
until a click sound is heard.
CAUTION
Insert the key into the transmitter
securely until a click sound is heard.
If it is not inserted securely, it could
detach from the transmitter.
3-30
Form No.8AS3-EA-09E
Radio equipment like this is governed

by laws in the United States.
equipment.
Knowing Your Mazda
Doors and Locks

qDeclaration of Conformity
Keyless entry system
3-31
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

Door Locks
WARNING
Always take all children and pets with
you or leave a responsible person with
them:
Leaving a child or a pet unattended
in a parked vehicle is dangerous. In
hot weather, temperatures inside a
vehicle can become high enough to
cause brain damage or even death.
play with them:
killed.
Keep all doors locked when driving:
Unlocked doors in a moving vehicle
are dangerous. Passengers can fall
out if a door is accidentally opened
and can more easily be thrown out in
an accident.
Always close all the windows and the
moonroof, lock the doors and take the
key with you when leaving your vehicle
unattended:
Leaving your vehicle unlocked is
dangerous as children could lock
themselves in a hot vehicle, which
could result in death. Also, a vehicle
left unlocked becomes an easy target
for thieves and intruders.
qLocking, Unlocking with Key

The driver's door can be locked/unlocked
with the key.
Turn the key toward the front to lock,
toward the back to unlock.
Lock
Unlock
qLocking with Request Switch

(with Advanced Key)
The doors can be locked by operating the
request switch while carrying the
advanced key outside the vehicle, refer to
Operations Using Advanced Keyless
Functions (page 3-7).
qUnlocking with Door Handle

(With Advanced Key)
The doors can be unlocked by operating
the door handle on the front doors while
carrying the advanced key outside the
vehicle, refer to Operations Using
Advanced Keyless Functions (page 3-7).
qLocking, Unlocking with

Transmitter (with Advanced Key)
The doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-15).
3-32
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

qLocking, Unlocking with Transmitter
(with Retractable Type Key)
The doors can be locked/unlocked by
(page 3-25).
To lock any door with the door-lock knob

from the outside, push the door-lock knob
to the lock position and close the door.
This does not operate the other door
locks.
Door-lock knob
qLocking, Unlocking with DoorLock Knob

To lock any door from the inside, push the
door-lock knob.
To unlock, pull it out.
This does not operate the other door
locks.
NOTE
l
Lock
l
Unlock
(With advanced key)

The driver's door cannot be locked using
the door-lock knob from the outside.
(Without advanced key)
The driver's door cannot be locked using
the door-lock knob from the outside if the
key is in the ignition switch.
When locking the doors this way, be careful
not to leave the key inside the vehicle.
qPower Door Locks

Vehicle lock-out prevention
(With advanced key)
The vehicle lock-out prevention feature
prevents you from locking yourself out of
the vehicle. All doors will automatically
unlock if they are locked using the power
door locks with any door open.
3-33
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

(With retractable type key)
The vehicle lock-out prevention feature
prevents you from locking yourself out of
the vehicle. With the key in the ignition
switch, all doors will automatically unlock
if they are locked using the power door
locks with any door open.
Locking, unlocking with key
All doors lock automatically when the
driver's door is locked with the key. All
doors unlock when the driver's door is
unlocked and the key is held in the unlock
position for one second or longer.
Lock
Unlock
NOTE
l
Holding the key in the unlocked position in

the driver's door lock for about a second
unlocks all doors. To unlock only the
driver's door, insert the key into the driver's
door lock and turn the key briefly to the
unlock position and then immediately
return it to the center position.
10-8.
3-34
Form No.8AS3-EA-09E
Locking, unlocking with door-lock

switch
All doors lock automatically when lock
side is pressed. They all unlock when
unlock side is pressed.
Unlock
Lock
Locking with request switch (with

advanced key)
All doors can be locked by operating the
request switch on the front doors while
Unlocking with door handle (with
advanced key)
Driver's door or all doors can be unlocked
by operating the door handle on the front
doors while carrying the advanced key
outside the vehicle, refer to Operating
Using Advanced Keyless Functions (page
3-7).
Locking, unlocking with transmitter
(with advanced key)
All doors can be locked/unlocked by
(page 3-15).
Knowing Your Mazda
Doors and Locks

Locking, unlocking with transmitter
(with retractable type key)
All doors can be locked/unlocked by
(page 3-25).
qRear Door Child Safety Locks

These locks are intended to help prevent
children from accidentally opening the
rear doors. Use them both whenever a
child rides in the vehicle.
If you slide the child safety lock to the
lock position before closing that door, the
door cannot be opened from the inside.
The door can be opened only by pulling
the outside handle.
Trunk Lid
WARNING
Never allow a person to ride in the
trunk:
Allowing a person to ride in the trunk
is dangerous. In addition, the person
in the trunk could be seriously
injured or killed during sudden
braking or a collision.
Keep the trunk closed when driving:
Exhaust gas entering the cabin of a
vehicle through an open trunk is
dangerous. This gas contains CO
(carbon monoxide), which is
colorless, odorless, and highly
poisonous. If inhaled, it can cause
loss of consciousness and death.
Unlock
Lock
3-35
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

qOpening and Closing the Trunk Lid
WARNING
Close the trunk lid, be sure the seat
backs are latched and do not allow
children to play inside the vehicle:
Leaving the trunk lid open or leaving
children in the vehicle with the keys is
dangerous. Children could open the
trunk lid and climb inside resulting in
possible injury or death from heat
exposure.
Always keep the car from being a
tempting place to play by latching the
rear seats, doors and the trunk, and
keeping the keys where children can
not play with them:
Leaving children or animals
unattended in a parked vehicle is
dangerous. Babies left sleeping and
children who lock themselves in cars
or trunks can die very quickly from
heat prostration. Do not leave your
children or pets alone in a car at any
time. Do not leave the car, the rear
folding seats or the trunk unlocked.
Opening the trunk lid with the request
switch (with advanced key)
The trunk lid can be opened by operating
the request switch on the trunk lid while
Opening the trunk lid with the
transmitter (with advanced key)
the keyless entry system transmitter, refer
to Keyless Entry System (page 3-15).
3-36
Form No.8AS3-EA-09E
Opening the trunk lid with the

transmitter (with retractable type key)
the keyless entry system transmitter, refer
to Keyless Entry System (page 3-25).
Opening the trunk lid with the remote
release button
Push the release button.
NOTE
While the ignition is switched ON, the trunk lid
can be opened only when the vehicle is stopped
with the parking brake applied (manual
transaxle) or with the selector lever in the P
position (automatic transaxle).
Knowing Your Mazda
Doors and Locks

When the trunk lid cannot be opened
If the vehicle battery is dead or there is a
malfunction in the electrical system and
the trunk lid cannot be opened, perform
the following procedure as an emergency
measure to Open it:
4. Slide the inside trunk release lever in

the direction of the arrow.
1. Open the cover behind the right rear

passenger seat head restraint.
Cover
Lever
Cover
After performing this emergency measure,

have the vehicle inspected at an
possible.
Closing the trunk lid
Use both hands to push the trunk lid down
until the lock snaps shut. Do not slam it.
Pull up on the trunk lid to make sure it is
secure.
qTrunk Light
The trunk light is on when the lid is open
and off when it's closed.
2. Pull the lever forward and fold down
the seatback.
3. Carefully climb into the trunk from the
back seat.
3-37
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

NOTE
To prevent the battery from being discharged,
do not leave the trunk open for a long period
when the engine is not running.
Inside Trunk Release Lever

Your vehicle is equipped with an inside
trunk release lever that provides a means
of escape for children and adults in the
event they become locked inside the
trunk.
No matter how careful adults might be
with keys and locking their cars, parents
should be aware that children may be
tempted to play around vehicles and use
the trunk as a hiding place.
Adults are advised to familiarize
themselves with the operation and
location of the inside trunk release lever
so that all children can be told about it in
an appropriate way, keeping in mind that
most vehicles do not have such levers.
3-38
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

WARNING
Close the trunk lid, be sure the seat
backs are latched and do not allow
children to play inside the vehicle:
Leaving the trunk lid open or leaving
children in the vehicle with the keys is
dangerous. Children could open the
trunk lid and climb inside resulting in
possible injury or death from heat
exposure.
qOpening the Trunk Lid from the

Inside
Slide the inside trunk release lever in the
direction of the arrow. The lever is made
of material that will glow for hours in the
darkness of the trunk following a brief
exposure to ambient light.
The inside trunk release lever is located
on the inside of the trunk lid.
Always keep the car from being a

tempting place to play by latching the
rear seats, doors and the trunk, and
keeping the keys where children can
not play with them:
Leaving children or animals
unattended in a parked vehicle is
dangerous. Babies left sleeping and
children who lock themselves in cars
or trunks can die very quickly from
heat prostration. Do not leave your
children or pets alone in a car at any
time. Do not leave the car, the rear
folding seats or the trunk unlocked.
3-39
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

Power Windows
The ignition must be ON for the power
windows to operate.
qOperating the Front Power Windows

NOTE
l
WARNING
Make sure the opening is clear before
closing a window:
Closing power windows are
dangerous. A person's hands, head,
or even neck could be caught by the
window and result in serious injury
or even death.
This warning applies especially to
children.
Always lock all passenger power
windows with the power window lock
switch on the driver's side while
children are in the vehicle, and never
allow children to play with power
window switches, the advanced key or
the keyless entry system:
Leaving the power window switches
unlocked while children are in the
vehicle is dangerous. Power window
switches that are not locked with the
power window lock switch would
allow children to operate power
windows unintentionally which could
result in serious injury if a child's
hands, head or neck becomes caught
by the window.
Letting children play with advanced
keys or keyless entry systems are just
as dangerous.
CAUTION
To prevent burning out the fuse and
damaging the power window system,
do not open or close more than three
windows at once.
3-40
Form No.8AS3-EA-09E
Each passenger power window can be

operated with each door switch when the
power window lock switch on the driver's
door is in the unlocked position (page
3-43).
Each passenger power window can also be
operated by the power window master
control switches on the driver's door.
Owner master control switch
Driver's window
Left rear window
Front passenger's
window
Right rear window
Power window lock switch
l
The following functions can be performed

for the front power windows using the
power window master control switches on
the driver's door or front passenger's door
switch.
Manual opening/closing
Auto-opening/closing
l
l
Knowing Your Mazda
Doors and Locks

Manual opening/closing
NOTE
To open a power window to the desired

position, lightly hold down the switch.
To close the power window to the desired
position, lightly pull up the switch.
(POWER WINDOW RESET PROCEDURE)

If the battery was disconnected during vehicle
maintenance, or for other reasons such as a
switch continues to be operated after the
window is fully open/close, the power windows
will not fully open and close automatically.
Resetting of the automatic function can be
performed using the driver's master control
switch or the front passenger door switch.
The power window auto function reset
procedure can be done on one or both door
switches. The power window auto function will
only resume on the side that has been reset.
Owner master control switch
Close
Driver's
window
Open
Front passenger's
window
Front passenger switch
Close
Open
1. Switch the ignition ON.

2. Make sure that the power window lock
switch located on the driver's door is not
depressed.
3. Press the switch and fully open the power
window.
4. Pull up the switch to fully close the power
window and continue holding the switch for
about 2 seconds after the window fully
closes.
5. Repeat Steps 3-4 for the passenger power
window.
Auto-opening/closing
To fully open a power window
automatically, press the switch completely
down.
To fully close the power window
automatically, pull the switch completely
up.
To stop the power window partway, pull
or press the switch in the opposite
direction and then release it.
6. Make sure that the power windows operate

correctly using the door switches.
Jam-safe window
If a person's hands, head or an object
blocks the window during the manual
closing operation or the auto-closing
operation, the window will stop and open
halfway.
3-41
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

WARNING
Make sure nothing blocks the window
just before it reaches the fully closed
position or while fully holding up the
power window switch:
Blocking the power window just
before it reaches the fully closed
position or while fully holding up the
power window switch is dangerous.
In this case, the jam-safe function
cannot prevent the window from
closing all the way. If fingers are
caught, serious injuries could occur.
qOperating the Rear Power Windows

The power windows may be operated
when the power window lock switch on
the driver's door is in the unlocked
position.
The rear power windows may be opened
or closed using the power window master
control switches on the driver's door.
Left rear window
NOTE
l
Depending on driving conditions, a closing

power window could stop and start opening
when the window feels a shock that is
similar to something blocking it.
In the event the jam-safe function activates
and the power window cannot be closed
automatically, pull and hold the switch fully
and the window will close.
The jam-safe window function does not
operate until the system is re-initialized.
Right rear window

Power window lock switch
To open the power window to the desired

position, hold down the switch.
To close the power window to the desired
position, pull up the switch.
Engine-off power window operation

The power window can be operated for
about 40 seconds after the ignition is
switched from ON to ACC or off with all
doors closed. If either front door is
opened, the power window will be
inoperable.
NOTE
For engine-off operation of the power window,
the switch must be held up firmly throughout
window closure because the auto-closing
function will be inoperable.
3-42
Form No.8AS3-EA-09E
Close
Open
Knowing Your Mazda
Doors and Locks

qPower Window Lock Switch
With the lock switch in the unlocked
position (button not depressed), all power
windows on each door can be operated.
With the lock switch in the locked
position (button depressed), only the
driver's side power window can be
operated.
Locked position
Unlocked position
WARNING
qOpening/Closing the Power Windows

and the Moonroof from Outside
The front power windows and the
moonroof can be opened or closed from
outside the vehicle after the doors and the
trunk lid are closed.
The front power windows may be
operated remotely when the power
window lock switch on the driver's door is
in the lock or unlocked position.
WARNING
closing a window and the moonroof:
Closing power windows and the
moonroof are dangerous. A person's
hands, head, or even neck could be
caught by the window or the
moonroof and result in serious injury
or even death.
This warning applies especially to
children.
Unless a passenger needs to operate a

power window, keep the power window
lock switch in the locked position:
Unintentional power window
operation is dangerous. A person's
hands, head, or neck could be caught
by the window and result in serious
injury.
NOTE
When the power window lock switch is in the
locked position, the light on front passenger's
power window switch turns off. The light may
be difficult to see depending on the
surrounding brightness.
Some models.
Form No.8AS3-EA-09E
3-43
Knowing Your Mazda
Doors and Locks

NOTE
l
The power windows and the moonroof

cannot be opened or closed from outside
the vehicle under the following condition:
A door or the trunk lid is opened.
The key is inserted into the ignition
switch.
The auxiliary key is inserted into the key
slot. (With advanced key)
The push button start is in any position
except off. (With advanced key)
The power windows and the moonroof may
not close completely. Make sure all the
windows and the moonroof are closed.
l
l
If the power windows and the moonroof

cannot be closed completely, operate each
power window switch or the tilt/slide switch
from inside the vehicle. After closing the
windows and the moonroof from outside the
vehicle, verify that they are completely
closed.
Opening
Because nobody likes getting into a very
hot car, Mazda has introduced a way to
open the two front windows and the
moonroof as you approach the vehicle to
get the air moving before you get in.
3-44
Form No.8AS3-EA-09E
WARNING
Use the remote auto-window and the
auto-moonroof function only when you
can see the vehicle and it is in a secure
area:
Do not let children play with your
keys. If they open the window and
moonroof without your knowing, the
open windows and moonroof are an
even bigger invitation to a thief than
leaving the doors unlocked.
Children playing with cars can get
themselves jammed in windows and
moonroof, and killed without making
a sound.
The windows and moonroof can be
opened for ventilating the cabin before
getting in the vehicle.
With unlock button
Press the unlock button on the transmitter
once, then press again within 1.5 seconds
and hold.
After the doors are unlocked, both
windows and the moonroof open while
the unlock button is pressed.
To stop the windows and the moonroof
while opening, release the button.
If the operation is performed from the
beginning again, the windows and the
moonroof open.
Knowing Your Mazda
Doors and Locks

Advanced key
With key
Operation
indicator light
Lock button
Unlock button
Trunk button
1. Insert the key in the driver's door key

cylinder.
2. Rotate the key clockwise and hold until
the windows and the moonroof are
completely open. After the doors are
unlocked, the windows fully open
automatically.
Panic button
Retractable type key

Open
Lock button
Unlock button
Panic button
Operation
indicator light
Trunk button
NOTE
l
The unlock button does not operate unless

it is pressed twice sequentially.
The lock button cannot be used to close the
power windows and the moonroof.
However, you can insert the key in the door
and lock the doors again and put up all the
windows if you do not want to climb back in
the car to operate the windows.
To stop this operation, turn the key to the

center position, then turn it clockwise
again.
NOTE
The window and the moonroof opening
operation also can be stopped by turning the
key counterclockwise. However, the doors will
lock.
Closing
The windows and the moonroof can be
closed in case they are left open after
getting out of the vehicle.
(With advanced key)

However, you can use the request switch on
either front door or insert the Auxiliary key
in the door and lock the doors again and
put up the windows if you do not want to
climb back in the car to operate the
windows.
3-45
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

NOTE
(With advanced key)
If the auto-lock function (page 3-8) has been
activated, the doors and the trunk lid
automatically lock as you walk away from the
vehicle, however, the power windows and the
moonroof cannot be closed. When leaving the
vehicle, close the windows and the moonroof
using the power window switch or the tilt or
slide switch inside the vehicle, the key, or a
request switch on the front door handles.
2. Press and hold the request switch on

the driver's door. After the doors are
locked, the windows and the moonroof
close as long as the request switch is
pressed.
Request switch
With key
1. Check that all openings are clear of
heads, hands and pets.
2. Insert the key in the driver's door key
cylinder.
3. Rotate the key counterclockwise and
hold until the windows and the
moonroof are completely open. After
the doors are locked, the windows and
the moonroof close as long as the key
is turned.
Close
With request switch on the driver's

door (Advanced key)
1. If the doors are locked, unlock them.
3-46
Form No.8AS3-EA-09E
To stop the windows and the moonroof

from closing, release the request switch. If
the operation is performed from the
beginning again, the windows and the
moonroof close.
Knowing Your Mazda
Doors and Locks

Fuel-Filler Lid and Cap
WARNING
When removing the fuel cap, loosen the
cap slightly and wait for any hissing to
stop. Then remove it:
Fuel spray is dangerous. Fuel can
burn skin and eyes and cause illness
if ingested. Fuel spray is released
when there is pressure in the fuel
tank and the fuel cap is removed too
quickly.
Before refueling, stop the engine, and
always keep sparks and flames away
from the filler neck:
Fuel vapor is dangerous. It could be
ignited by sparks or flames causing
serious burns and injuries.
Additionally, use of the incorrect fuel
filler cap or not using a fuel filler cap
may result in fuel leak, which could
result in serious burns or death in an
accident.
qFuel-Filler Lid
To open, pull the remote fuel-filler lid
release.
Remote fuel-filler
lid release
qFuel-Filler Cap
To remove the fuel-filler cap, turn it
counterclockwise.
To close the fuel-filler cap, turn it
clockwise until two or more click sounds
are heard.
CAUTION
Always use only a genuine Mazda
fuel cap or an approved equivalent,
available at an Authorized Mazda
Dealer. The wrong cap can result in a
serious malfunction of the fuel and
emission control systems. It may also
cause the check engine light in the
instrument cluster to illuminate.
Open
Close
3-47
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

CAUTION
If the check fuel cap warning light
illuminates, the fuel-filler cap may
not be properly installed. If the
warning light illuminates, park your
vehicle safely off the right-of-way,
remove the fuel-filler cap and
reinstall it correctly. After the cap has
been correctly installed, the fuel cap
warning light may continue to
illuminate until a number of driving
cycles have been completed. A drive
cycle consists of starting the engine
(after four or more hours with the
engine off) and driving the vehicle on
city and highway roads.
Continuing to drive with the check
fuel cap warning light illuminated
could cause the check engine light to
illuminate as well.
NOTE
Hood
WARNING
Always check that the hood is closed
and securely locked:
A hood that is not closed and
securely locked is dangerous as it
could fly open while the vehicle is
moving and block the driver's vision
which could result in a serious
accident.
qOpening the Hood

1. With the vehicle parked, pull the
release handle to unlock the hood.
Release handle
The removed cap can be attached to the inner

side of the lid during refueling to prevent fuel
on the cap from dripping onto the vehicle.
2. Insert your hand into the hood opening

and slide the hood latch lever to the
right and lift the hood.
3-48
Form No.8AS3-EA-09E
Knowing Your Mazda
Doors and Locks

3. Grasp the support rod in the padded
area and secure it in the stay hole
indicated by the arrow to hold the hood
open.
Pad
Moonroof
The moonroof can be opened or closed
electrically only when the ignition is
switched ON.
Slide switch
Tilt switch
Clip
Support rod
qClosing the Hood
WARNING
Do not leave items in the engine
compartment:
After you have finished checking or
doing servicing in the engine
compartment, do not forget and
leave items such as tools or rags in
the engine compartment.
Tools or other items left in the engine
compartment could cause engine
damage or a fire leading to an
unexpected accident.
1. Check under the hood area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Insert the support rod in its clip while
holding up the hood. Verify that the
support rod is secured in the clip before
closing the hood.
WARNING
Do not let passengers stand up or
extend part of their body through the
open moonroof while the vehicle is
moving:
Extending the head, arms, or other
parts of the body through the
moonroof is dangerous. The head or
arms could hit something while the
vehicle is moving. This could cause
closing the moonroof:
A closing moonroof is dangerous. The
hands, head, or even neck of a
person especially a child could
be caught in it as it closes, causing
serious injury or even death.
3. Close the hood so that it locks securely.
Some models.
Form No.8AS3-EA-09E
3-49
Knowing Your Mazda
Doors and Locks

NOTE
Before washing your Mazda, make sure the
moonroof is completely closed so that water
does not get inside the cabin area. After
washing your Mazda or after it rains, wipe the
water off the moonroof before operating it to
avoid water penetration which could cause
rust and water damage to your headliner.
To stop sliding partway, press any part of

the tilt or slide switch.
Open
qOperating the Moonroof

Tilt Operation
The rear of the moonroof can be tilted
open to provide more ventilation.
To fully tilt automatically, momentarily
press the tilt switch.
To fully close automatically, momentarily
pull the tilt switch or press the front of the
slide switch.
To stop tilting partway, press any part of
the tilt or slide switch.
Close
Tilt down
(Close)
Power moonroof re-set procedure

If the battery had been disconnected
during vehicle maintenance or for other
reasons, the moonroof may not fully open
or close. The moonroof's jam-safe
function does not function while the
moonroof is re-setting. Carry out the
following procedure to resume operation:
2. Press the tilt switch, to partially tilt
open the rear of the moonroof.
NOTE
Tilt down
Close
(Tilt down)
Tilt up
Slide Operation
To fully open automatically, momentarily
press the rear of the slide switch.
To fully close automatically, momentarily
press the front of the slide switch or pull
the tilt switch.
3-50
Form No.8AS3-EA-09E
If the re-set procedure is performed while the

moonroof is in the slide position (partially
open) it closes before the rear tilts opens.
3. Repeat the procedure in Step 2. The

rear of the moonroof tilts open to the
fully open position, then closes a little.
Knowing Your Mazda
Doors and Locks

qEngine-off Moonroof Operation
The moonroof can be operated for about
40 seconds after the ignition is switched
from ON to the ACC or LOCK with all
doors closed. If any door is opened, the
moonroof will be inoperable.
NOTE
NOTE
l
Depending on driving conditions, a closing

moonroof could stop and start opening
when the moonroof feels a shock that is
similar to something blocking it.
The moonroof's jam-safe function does not
function while the moonroof is initializing.
For engine-off operation of the moonroof, the

switch must be pushed firmly throughout
moonroof closure because the auto-closing
function will be inoperable.
qSunshade
qOpening/Closing the Moonroof

from the Outside
The sunshade opens automatically when

the moonroof is opened, but must be
closed by hand.
The sunshade can be opened and closed

by hand.
The moonroof can be opened or closed

from outside the vehicle after the doors
are closed.
Refer to Opening/Closing the Power
Windows and the Moonroof from the
Outside on page 3-43.
Sunshade
qJam-safe Moonroof
If a person's hands, head or an object
blocks the moonroof during closing
operation, the moonroof will stop and
open halfway.
WARNING
Make sure nothing blocks the
moonroof just before it reaches the
fully closed position:
Blocking the moonroof just before it
reaches the closed position is
dangerous.
In this case, the jam-safe function
cannot prevent the moonroof from
stopping. If fingers are caught,
serious injuries could occur.
CAUTION
The sunshade does not tilt. To
avoid damaging the sunshade, do
not push up on it.
Do not close the sunshade while
the moonroof is opening. Trying to
force the sunshade closed could
damage it.
3-51
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
Immobilizer System (with
Advanced Key)
The immobilizer system allows the engine
to start only with an advanced key the
system recognizes.
If someone attempts to start the engine
with an unrecognized advanced key, the
engine will not start, thereby helping to
prevent the theft of your vehicle.
If you have a problem with the
immobilizer system or the advanced key
(including auxiliary key), consult an
Authorized Mazda Dealer.
CAUTION
Do not allow the following when
starting the engine with the auxiliary
key due to an advanced key dead
battery or other malfunction.
Otherwise the signal from the
auxiliary key will not be received
correctly and the engine may not
start.
A key ring rests on the key grip.
CAUTION
Radio equipment like this is
governed by laws in the United
States.
responsible for compliance could
void the user's authority to
operate the equipment.
To avoid damage to the key, do
not:
Drop the key.
Get the key wet.
Expose the key to any kind of
magnetic field.
Expose the key to high
direct sunlight.
Metal parts of other keys or metal

objects touch the auxiliary key
grip.
Spare auxiliary keys or keys for

other vehicles equipped with an
immobilizer system touch or come
near the auxiliary key.
Devices for electronic purchases, or

security passage which touch or
come near the auxiliary key.
3-52
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
NOTE
l
The advanced keys (including auxiliary key)

carry a unique electronic code. For this
reason, and to assure your safety, obtaining
a replacement advanced key (including
auxiliary key) requires some waiting time.
They are only available through an
Always keep a spare advanced key in case
one is lost. If an advanced key is lost,
soon as possible.
If you lose an advanced key (including
auxiliary key), an Authorized Mazda Dealer
will reset the electronic codes of your
remaining advanced keys (including
auxiliary keys) and immobilizer system.
Bring all the remaining advanced keys
(including auxiliary keys) to an Authorized
Mazda Dealer to reset.
Starting the vehicle with a key that has not
been reset is not possible.
3-53
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
Immobilizer system
3-54
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
qOperation
Arming
NOTE
l
The system is armed when the ignition is

switched from ON to ACC or off. The
security indicator light in the instrument
cluster flashes every 2 seconds until the
system is disarmed.
l
Disarming
The system is disarmed when the ignition
is switched to ON with the registered
advanced key.
The security indicator light illuminates for
about 3 seconds and goes out.
If the engine does not start with the
correct advanced key, and the security
indicator light keeps illuminating or
flashing, the system may have a
malfunction. Consult an Authorized
Mazda Dealer.
The engine may not start and the security

indicator light may illuminate or flash if the
advanced key is placed in an area where it
is difficult for the system to detect the
signal, such as on the dashboard, or in the
glove box. Move the advanced key to
another place, switch the ignition off, and
then restart the engine.
Signals from a TV or radio station, or from
a transceiver or a mobile telephone could
interfere with your immobilizer system. If
you are using the proper advanced key and
the engine fails to start, check the security
indicator light. If the indicator light is
flashing, switch the ignition to ACC or off
and wait for a while, then restart the
engine. If it does not start after 3 or more
tries, contact an Authorized Mazda Dealer.
If the security indicator light flashes
continuously while you are driving, do not
shut off the engine. Go to an Authorized
Mazda Dealer and have it checked. If the
engine is shut off while the indicator light is
flashing, you will not be able to restart it.
Since the electronic codes are reset when
repairing the immobilizer system, the
advanced key (including auxiliary key) are
needed. Bring all the advanced keys
(including auxiliary keys) to an Authorized
Mazda Dealer.
3-55
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
qModification and Add-On
Equipment
Mazda cannot guarantee the immobilizer
system's operation if the system has been
modified or if any add-on equipment has
been installed.
CAUTION
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the immobilizer
system or the vehicle.
Immobilizer System
(without Advanced Key)
The immobilizer system allows the engine
to start only with a key the system
recognizes.
If someone attempts to start the engine
with an unrecognized key, the engine will
not start, thereby helping to prevent the
theft of your vehicle.
If you have a problem with the
immobilizer system or the key, consult an
CAUTION
Radio equipment like this is
governed by laws in the United
States.
responsible for compliance could
void the user's authority to
operate the equipment.
To avoid damage to the key, do
not:
Drop the key.
Get the key wet.
Expose the key to any kind of
magnetic field.
Expose the key to high
direct sunlight.
3-56
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
CAUTION
When starting the engine do not
allow the following, as the engine
may not start due to the electronic
signal from the ignition key not being
transmitted correctly.
A key ring rests on the key grip.
NOTE
l
Metal parts of other keys or metal

objects touch the key grip.
The keys carry a unique electronic code.

For this reason, and to assure your safety,
obtaining a replacement key requires some
waiting time. They are only available
through an Authorized Mazda Dealer.
Always keep a spare key, in case one is lost.
If a key is lost, contact an Authorized
If you lose a key, an Authorized Mazda
Dealer will reset the electronic codes of
your remaining keys and immobilizer
system. Bring all the remaining keys to an
Authorized Mazda Dealer to reset.
Starting the vehicle with a key that has not
been reset is not possible.
Spare keys or keys for other

vehicles equipped with an
immobilizer system touch or come
near the key grip.
Devices for electronic purchases, or

security passage which touch or
come near the key.
3-57
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
Immobilizer system
3-58
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
qOperation
Arming
NOTE
l
The system is armed when the ignition

switch is turned from the ON to the ACC
or LOCK position.
The security indicator light in the
instrument cluster flashes every two
seconds until the system is disarmed.
Disarming
The system is disarmed when the ignition
switch is turned to the ON position with
the correct ignition key.
The security indicator light illuminates for
about three seconds and goes out.
correct ignition key, and the security
Mazda Dealer.
Signals from a TV or radio station, or from

a transceiver or a mobile telephone, could
interfere with your immobilizer system. If
you are using the proper key and your
engine fails to start, check the security
indicator light. If it is flashing, remove the
ignition key and wait 2 seconds or more,
then reinsert it and try starting the engine
again. If it does not start after 3 or more
tries, contact an Authorized Mazda Dealer.
If the security indicator light flashes
continuously while you are driving, do not
shut off the engine. Go to an Authorized
Mazda Dealer and have it checked. If you
shut off the engine while the light is
flashing you will not be able to restart it.
Since the electronic codes are reset when
repairing the immobilizer system, the keys
are needed. Bring all the existing keys to an
qModification and Add-On

Equipment
Mazda cannot guarantee the immobilizer
system's operation if the system has been
modified or if any add-on equipment has
been installed.
CAUTION
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the immobilizer
system or the vehicle.
3-59
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
Theft-Deterrent System
If the theft deterrent system detects an
inappropriate entry into the vehicle, which
could result in the vehicle or its contents
being stolen, the alarm alerts the
surrounding area of an abnormality by
sounding the horn and flashing the hazard
warning lights.
Refer to Operation on page 3-60.
NOTE
l
The theft-deterrent system operates with the

key or the keyless entry system transmitter.
(With advanced key)
The theft-deterrent system can also be
operated using the advanced keyless
function.
The system operates only when the driver is
in the vehicle or within operational range
The system will not function unless it is
properly armed. To properly secure the
vehicle, always make sure all windows are
completely closed and all doors and the
trunk lid are locked before leaving the
vehicle. Remember to take your key and
transmitter.
qOperation
System triggering conditions
The horn sounds intermittently and the
hazard warning lights flash for about 30
seconds when the system is triggered by
any one of the following:
l Forcing open a door, the hood or the
trunk lid.
l Unlocking a door with the inside doorlock knob.
l Unlocking a door with the door lock
switch.
l Opening a door by operating an inside
door-lock knob.
3-60
Some models.
Form No.8AS3-EA-09E
Opening the hood by operating the

hood release handle.
l (Without advanced key)
Switching the ignition ON without the
key.
(With advanced key)
Switching the ignition ON without
using the push button start.
l Opening the trunk lid by operating the
trunk lid release button.
If the system is triggered again, the lights
and horn will activate until a door is
unlocked or the trunk lid is opened with
the key or with the transmitter.
(With advanced key)
The lights and horn can also be
deactivated by unlocking a door using the
sensor on the inside of the door handle.
l
NOTE
If the battery goes dead while the theftdeterrent system is armed, the horn will
activate and the hazard warning lights will
flash when the battery is charged or replaced.
Knowing Your Mazda
Security System
qHow to Arm the System
1. Remove the key from the ignition
switch.
(With advanced key)
Press the push button start to off
position, if the auxiliary key is inserted
in the key slot, remove it.
NOTE
l
2. Make sure the hood and the trunk lid

are closed. Close and lock all doors and
the trunk lid from the outside using the
key. If you have the keyless entry
system, press the lock button on the
transmitter.
(With advanced key)
Press a request switch on the doors or
the lock button on the transmitter.
(Without advanced key)
The following method will also arm the
theft-deterrent system:
Close the hood and the trunk lid . Press
the area on the door-lock switch
marked once. Close all doors.
The hazard warning lights will flash
once to indicate that the system is
armed.
The theft deterrent system can also be
armed by activating the auto re-lock
function with all the doors, the trunk lid
and the hood closed.
3. After 20 seconds, the system is fully
armed.
The system will disarm if one of the

following operations takes place within 20
seconds after closing the trunk lid and
locking all the doors:
Pressing the unlock button on the
transmitter.
Any door or the trunk lid is opened.
Unlocking a door with the inside doorlock knob.
The hood is opened.
The key is inserted in the ignition switch.
The auxiliary key inserted into the key
slot (with advanced key).
(With advanced key)
The push button start is pressed or a
door is unlocked using the sensor on the
inside of the door handle.
The ignition is switched on.
To rearm the system, do the arming
procedure again.
lock button on the transmitter or using the
key while the theft-deterrent system is
armed, the hazard warning lights will flash
once to indicate that the system is armed.
There is nothing to sense that a window or
moonroof is open in the system, you must
confirm the windows and moonroof before
you activate the system, and be careful with
the advanced key not to open the windows
and moonroof unintentionally when
unlocking the vehicle.
l
l
l
l
qTo Turn Off an Armed System

An armed system can be turned off by any
one of the following methods:
l Unlock a door with the key.
l Press the unlock button on the keyless
entry system transmitter.
l Insert the key into the ignition switch
(key slot) and switch the ignition to
ON.
3-61
Form No.8AS3-EA-09E
Knowing Your Mazda
Security System
l
(With advanced key)

Unlock a door using the sensor on
the inside of the door handle.
The ignition is switched on.
qTheft-Deterrent Labels
The hazard warning lights will flash twice

to indicate that the system is turned off.
NOTE
When the doors are unlocked by pressing the
unlock button on the transmitter or using the
key while the theft-deterrent system is turned
off, the hazard warning lights will flash twice
to indicate that the system is turned off.
qTo Stop the Alarm

A triggered alarm can be turned off by
any one of the following methods:
l Unlock a door with the key.
l Press the unlock button or press and
hold the trunk button on the keyless
entry system transmitter.
l The engine is started with the ignition
key or the start knob.
l (With advanced key)
Press the unlock button or press and
hold the trunk button on the
transmitter.
Unlock a door using the sensor on
the inside of the door handle.
The engine is started with the push
button start.
l
NOTE
If you have any problem with the theftdeterrent system, consult an Authorized Mazda
Dealer.
3-62
Form No.8AS3-EA-09E
A label indicating that your vehicle is

equipped with a Theft-Deterrent System is
in the glove compartment.
Mazda recommends that you affix it to the
lower rear corner of a front door window.
Knowing Your Mazda
Steering Wheel and Mirrors

Steering Wheel
WARNING
Never adjust the steering wheel while
the vehicle is moving:
Adjusting the steering wheel while
the vehicle is moving is dangerous.
Moving it can very easily cause the
driver to abruptly turn to the left or
right. This can lead to loss of control
or an accident.
qSteering Wheel Adjustment

To change the angle or length of the
steering wheel:
1. Stop the vehicle, pull down the lock
release lever under the steering
column.
Lock release lever
Mirrors
qOutside Mirrors
Check the mirror angles before driving.
Mirror type
Flat type (driver's side)
Flat surface mirror.
Convex type (front passenger side)
The mirror has single curvature on its
surface.
WARNING
Be sure to look over your shoulder
before changing lanes:
Changing lanes without looking over
the appropriate shoulder is
dangerous, particularly not taking
the actual distance of the vehicle in
the right convex mirror. You could
have a serious accident. What you
see in the convex mirror is closer than
it appears.
Power mirror
The ignition must be switched ACC or
ON.
To adjust:
2. Tilt the steering wheel and/or adjust the

steering column length to the desired
positions, push the lever up to lock the
column.
1. Press the left or right side of the

selector switch to choose the left or
right side mirror.
3. Push the wheel up and down to be

certain it's locked before driving.
3-63
Form No.8AS3-EA-09E
Knowing Your Mazda

2. Depress the mirror switch in the
appropriate direction.
Selector switch
Mirror switch
After adjusting the mirror, lock the control

by placing the selector switch in the
middle position.
qRearview Mirror
WARNING
Do not stack cargo or objects higher
than the seatbacks:
Cargo stacked higher than the
seatbacks is dangerous. It can block
your view in the rearview mirror,
which might cause you to hit another
car when changing lanes.
Rearview mirror adjustment
Before driving, adjust the rearview mirror
to center on the scene through the rear
window.
Manual day/night mirror
Ground illumination light

Light is on or off when the illuminated
entry system is on (page 6-143).
Auto-dimming mirror
Auto-dimming door mirrors

The movement of the auto-dimming door
mirrors is interlocked with the autodimming rearview mirror in the interior to
automatically reduce glare from rear oncoming vehicles.
Refer to Rearview mirror on page 3-64.
3-64
Some models.
Form No.8AS3-EA-09E
Knowing Your Mazda

NOTE
For the manual day/night mirror, perform the
adjustment with the day/night lever in the day
position.
Reducing glare from headlights
Press the OFF button ( ) to cancel the

automatic dimming function. The
indicator light will turn off.
To reactivate the automatic dimming
function, press the ON button ( ). The
indicator light will illuminate.
Manual day/night mirror

Push the day/night lever forward for day
driving. Pull it back to reduce glare of
headlights from cars at the rear.
Day/Night lever
Indicator light
OFF button
ON button
Day
Night
Auto-dimming mirror
The auto-dimming mirror automatically
reduces glare of headlights from cars at
the rear when the ignition is switched ON.
The door mirrors also adjust in
conjunction with the interior rear view
mirror.
3-65
Form No.8AS3-EA-09E
Knowing Your Mazda

NOTE
l
Do not use glass cleaner or suspend objects

on or around the light sensor. Otherwise,
light sensor sensitivity will be affected and
may not operate normally.
Light sensor
Light sensor
For information regarding the 3 buttons

,
,
) on the auto-dimming
(
mirror, refer to HomeLink Wireless Control
System (page 5-70).
The auto-dimmer function is canceled when
the ignition is switched ON and the shift
lever/selector lever is in reverse (R).
3-66
Form No.8AS3-EA-09E

Important information about driving your Mazda.
Fuel and Engine Exhaust Precautions ........................................

Fuel Requirements ....................................................................
Emission Control System ..........................................................
Engine Exhaust (Carbon Monoxide) .........................................
4-2
4-2
4-3
4-4
Before Starting the Engine ........................................................... 4-5

Before Getting In ...................................................................... 4-5
After Getting In ......................................................................... 4-5
Driving Tips ................................................................................... 4-6
Break-In Period ......................................................................... 4-6
Money-Saving Suggestions ...................................................... 4-6
Hazardous Driving .................................................................... 4-7
Floor Mat .................................................................................. 4-7
Rocking the Vehicle .................................................................. 4-8
Winter Driving .......................................................................... 4-8
Driving In Flooded Area ........................................................... 4-9
Overloading ............................................................................ 4-10
Driving on Uneven Road ........................................................ 4-11
Towing ......................................................................................... 4-12
Trailer Towing ......................................................................... 4-12
4-1
Form No.8AS3-EA-09E
Fuel and Engine Exhaust Precautions

Fuel Requirements
Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,
which will reduce exhaust emissions and keep spark plug fouling to a minimum.
Your Mazda will perform best with fuel listed in the table.
Fuel
Regular unleaded fuel
Octane Rating*(Anti-knock index)

87 [ (R+M)/2 method] or above (91 RON or above)
* U.S. federal law requires that octane ratings be posted on gasoline station pumps.
Fuel with a rating lower than 87 octane (91 RON) could cause the emission control system to lose effectiveness. It
could also cause engine knocking and serious engine damage.
CAUTION
USE ONLY UNLEADED FUEL.
Leaded fuel is harmful to the catalytic converter and oxygen sensors and will lead
to deterioration of the emission control system and or failures.
Your vehicle can only use oxygenated fuels containing no more than 10 % ethanol
by volume. Damage to your vehicle may occur when ethanol exceeds this
recommendation, or if the gasoline contains any methanol. Stop using gasohol of
any kind if your vehicle engine is performing poorly.
Never add fuel system additives. Never add cleaning agents other than those
specified by Mazda. Other cleaning agents and additives may damage the system.
Consult an Authorized Mazda Dealer.
Gasoline blended with oxygenates such as alcohol or ether compounds are generally
referred to as oxygenated fuels. The common gasoline blend that can be used with your
vehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such as
ethanol or methanol, may be marketed under the name Gasohol.
Vehicle damage and drivability problems resulting from the use of the following may not
be covered by the Mazda warranty.
l Gasohol containing more than 10% ethanol.
l Gasoline or gasohol containing methanol.
l Leaded fuel or leaded gasohol.
4-2
Form No.8AS3-EA-09E

Emission Control System
Your vehicle is equipped with an emission control system (the catalytic converter is part of
this system) that enables your vehicle to comply with existing exhaust emissions
requirements.
WARNING
Never park over or near anything flammable:
Parking over or near anything flammable, such as dry grass, is dangerous. Even with
the engine turned off, the exhaust system remains very hot after normal use and
could ignite anything flammable. A resulting fire could cause serious injury or death.
CAUTION
Ignoring the following precautions could cause lead to accumulate on the catalyst
inside the converter or cause the converter to get very hot. Either condition will
damage the converter and cause poor performance.
USE ONLY UNLEADED FUEL.
Do not drive your Mazda with any sign of engine malfunction.
Do not coast with the ignition switched off.
Do not descend steep grades in gear with the ignition switched off.
Do not operate the engine at high idle for more than 5 minutes.
Do not tamper with the emission control system. All inspections and adjustments
must be made by a qualified technician.
Do not push-start or pull-start your vehicle.
NOTE
Under U.S. federal law, any modification to the original-equipment emission control system before
the first sale and registration of a vehicle is subject to penalties. In some states, such modification
made on a used vehicle is also subject to penalties.
NOTE
After the vehicle has been driven a certain distance and the engine is turned off, the sound of a valve
opening and closing can be heard. This does not indicate an abnormality. Your vehicle has a selfchecking mechanism which operates after the engine is turned off.
4-3
Form No.8AS3-EA-09E

Engine Exhaust (Carbon Monoxide)
WARNING
Do not drive your vehicle if you smell exhaust gas inside the vehicle:
Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is
colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness
and death. If you smell exhaust gas inside your vehicle, keep all windows fully open
and contact an Authorized Mazda Dealer immediately.
Do not run the engine when inside an enclosed area:
Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaust
gas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss
of consciousness or even death could occur.
Open the windows or adjust the heating or cooling system to draw fresh air when
idling the engine:
Exhaust gas is dangerous. When your vehicle is stopped with the windows closed
and the engine running for a long time even in an open area, exhaust gas, which
contains poisonous carbon monoxide, could enter the cabin. Loss of consciousness or
even death could occur.
Clear snow from underneath and around your vehicle, particularly the tail pipe,
before starting the engine:
Running the engine when a vehicle is stopped in deep snow is dangerous. The
exhaust pipe could be blocked by the snow, allowing exhaust gas to enter the cabin.
Because exhaust gas contains poisonous carbon monoxide, it could cause loss of
consciousness or even death to occupants in the cabin.
4-4
Form No.8AS3-EA-09E
Before Starting the Engine

Before Getting In
l
Be sure the windows, outside mirrors,

and outside lights are clean.
Inspect inflation pressures and
condition of tires.
Look under the vehicle for any sign of
fluid leaks.
If you plan to back up, make sure
nothing is in your way.
NOTE
Engine oil, engine coolant, brake/clutch fluid,
washer fluid, and other fluid levels should be
inspected. See Maintenance, Section 8.
After Getting In
Are all doors closed and locked?
Is the seat adjusted properly?
l Are the inside and outside mirrors
adjusted?
l Is the steering wheel adjusted properly?
l Is everyone's seat belt fastened?
l Check all gauges.
l Check all warning lights when the
l Release the parking brake and make
sure the brake warning light goes off.
Always be thoroughly familiar with your
Mazda.
l
l
4-5
Form No.8AS3-EA-09E
Driving Tips
Break-In Period
Money-Saving Suggestions
No special break-in is necessary, but a few

precautions in the first 1,000 km (600
miles) may add to the performance,
economy, and life of your Mazda.
l Do not race the engine.
l Do not maintain one constant speed,
either slow or fast, for a long period of
time.
l Do not drive constantly at full-throttle
or high engine rpm for extended
periods of time.
l Avoid unnecessary hard stops.
l Avoid full-throttle starts.
How you operate your Mazda determines

how far it will travel on a tank of fuel. Use
these suggestions to help save money on
fuel and repairs.
l Avoid long warm-ups. Once the engine
runs smoothly, begin driving.
l Avoid fast starts.
l Keep the engine tuned. Follow the
maintenance schedule (page 8-3) and
have an Authorized Mazda Dealer
perform inspections and servicing.
l Use the air conditioner only when
necessary.
l Slow down on rough roads.
l Keep the tires properly inflated.
l Do not carry unnecessary weight.
l Do not rest your foot on the brake
pedal while driving.
l Keep the wheels in correct alignment.
l Keep windows closed at high speeds.
l Slow down when driving in crosswinds
and headwinds.
WARNING
Never stop the engine when going
down a hill:
Stopping the engine when going
down a hill is dangerous. This causes
the loss of power steering and power
brake control, and may cause
damage to the drivetrain. Any loss of
steering or braking control could
cause an accident.
4-6
Form No.8AS3-EA-09E
Driving Tips
Hazardous Driving
WARNING
Be extremely careful if it is necessary to
downshift on slippery surfaces:
Downshifting into lower gear while
driving on slippery surfaces is
dangerous. The sudden change in tire
speed could cause the tires to skid.
This could lead to loss of vehicle
control and an accident.
Do not rely on ABS as a substitute for
safe driving:
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident.
When driving on ice or in water, snow,
mud, sand, or similar hazards:
l Be cautious and allow extra distance
for braking.
l Avoid sudden braking and sudden
maneuvering.
l Do not pump the brakes. Continue to
press down on the brake pedal.
Refer to Anti-Lock Brake System
(ABS) on page 5-7.
l If you get stuck, select a lower gear and
accelerate slowly. Do not spin the front
wheels.
l For more traction in starting on
slippery surfaces such as ice or packed
snow, use sand, rock salt, chains,
carpeting, or other nonslip material
under the front wheels.
NOTE
Use snow chains only on the front wheels.
Floor Mat
WARNING
Make sure the floor mats are hooked
on the retention pins to prevent them
from bunching up under the foot
pedals:
Using a floor mat that is not secured
is dangerous as it will interfere with
the accelerator and brake pedal
operation, which could result in an
accident.
Do not install two floor mats, one on
top of the other, on the driver's side:
Installing two floor mats, one on top
of the other, on the driver's side is
dangerous as the retention pins can
only keep one floor mat from sliding
forward.
In using a heavy duty floor mat for
winter use always remove the
original floor mat.
Loose floor mat(s) will interfere with
the foot pedal and could result in an
accident.
When setting a floor mat, position the

floor mat so that its eyelets are inserted
over the pointed end of the retention
posts.
4-7
Form No.8AS3-EA-09E
Driving Tips
Rocking the Vehicle
WARNING
Do not spin the wheels at more than 56
km/h (35 mph), and do not allow
anyone to stand behind a wheel when
pushing the vehicle:
When the vehicle is stuck, spinning
the wheels at high speed is
dangerous. The spinning tire could
overheat and explode. This could
cause serious injuries.
CAUTION
Too much rocking may cause engine
overheating, transaxle failure, and
tire damage.
If you must rock the vehicle to free it from
snow, sand or mud, depress the
accelerator slightly and slowly move the
shift lever from 1 (D) to R.
4-8
Form No.8AS3-EA-09E
Winter Driving
Carry emergency gear, window
scraper, flares, a small shovel, jumper
cables, and a small bag of sand or salt.
Ask an Authorized Mazda Dealer to
perform the following precautions:
l Have the proper ratio of antifreeze in
the radiator.
Refer to Engine Coolant on page 8-21.
l Inspect the battery and its cables. Cold
reduces battery capacity.
l Use only cold-weather engine oil (page
8-19).
l Inspect the ignition system for damage
and loose connections.
l Use washer fluid made with
antifreezebut do not use engine
coolant antifreeze for washer fluid
(page 8-27).
l Do not use the parking brake in
freezing weather as it may freeze.
Instead, shift to P with an automatic
transaxle and to 1 or R with a manual
transaxle. Block the rear wheels.
l Do not apply excessive force to a
window scraper when removing ice or
frozen snow on the mirror glass and
windshield.
l Never use warm or hot water for
removing snow or ice from windows
and mirrors as it could result in the
glass cracking.
l
Driving Tips
qSnow Tires
Use snow tires on all four wheels
Do not go faster than 120 km/h (75 mph)
while driving with snow tires. Inflate
snow tires 30 kPa (0.3 kgf/cm2, 4.3 psi)
more than recommended on the tire
pressure label (driver's door frame), but
never more than the maximum cold-tire
pressure shown on the tires.
Your vehicle is originally equipped with
all season radials designed to be used all
year around. In some extreme climates
you may find it necessary to replace them
with snow tires during the winter months
to further improve traction on snow and
ice covered roads.
WARNING
Use only the same size and type tires
(snow, radial, or non-radial) on all four
wheels:
Using tires different in size or type is
dangerous. Your vehicle's handling
could be greatly affected and result
in an accident.
Driving In Flooded Area

WARNING
Dry wet brakes by driving very slowly
and applying the brakes lightly until
brake performance returns to normal:
Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.
CAUTION
Do not drive the vehicle on flooded
roads as it could cause short
circuiting of electrical/electronic
parts, or engine damage or stalling
from water absorption. If the vehicle
has been immersed in water, consult
an Authorized Mazda Dealer.
CAUTION
Check local regulations before using
studded tires.
qTire Chains
This vehicle cannot be operated with tire
chains because it could cause interference
with the vehicle body and scratching.
4-9
Form No.8AS3-EA-09E
Driving Tips
Overloading
WARNING
Be careful not to overload your vehicle:
The gross axle weight rating (GAWR)
and the gross vehicle weight rating
(GVWR) of your vehicle are on the
Motor Vehicle Safety Standard Label
on the driver's door frame. Exceeding
these ratings can cause an accident
or vehicle damage. You can estimate
the weight of your load by weighing
the items (or people) before putting
them in the vehicle.
4-10
Form No.8AS3-EA-09E
Driving Tips
Driving on Uneven Road
Your vehicle's suspension and underbody can be damaged if driven on rough/uneven roads
or over speed bumps at excessive speeds. Use care and reduce speed when traveling on
rough/uneven roads or over speed bumps.
Use care not to damage the vehicle's underbody, bumpers or muffler(s) when driving under
the following conditions:
l Ascending or descending a slope with a sharp transition angle
l Ascending or descending a driveway or trailer ramp with a sharp transition angle
Your vehicle is equipped with low profile tires allowing class-leading performance and
handling. As a result, the sidewall of the tires are very thin and the tires and wheels can be
damaged if driven through potholes or on rough/uneven roads at excessive speeds. Use
care and reduce speed when traveling on rough/uneven roads or through potholes.
4-11
Form No.8AS3-EA-09E
Towing
Trailer Towing
The Mazda6 is not designed for towing.
Never tow a trailer with your Mazda6.
4-12
Form No.8AS3-EA-09E
Driving Your Mazda

Explanation of instruments and controls.
Starting and Driving ..................................................................... 5-2

Ignition Switch .......................................................................... 5-2
Starting the Engine .................................................................... 5-4
Brake System ............................................................................ 5-5
Manual Transaxle Operation ................................................... 5-10
Automatic Transaxle Controls ................................................ 5-12
Power Steering ........................................................................ 5-19
Cruise Control ...................................................................... 5-19
Traction Control System (TCS) .............................................. 5-23
Dynamic Stability Control (DSC) ........................................ 5-25
Tire Pressure Monitoring System ......................................... 5-27
Blind Spot Monitoring (BSM) System ................................. 5-33
Instrument Cluster and Indicators ............................................ 5-38
Meters and Gauges .................................................................. 5-38
Warning/Indicator Lights and Beep Sounds ............................ 5-43
Warning/Indicator Lights ........................................................ 5-43
Beep Sounds ........................................................................... 5-59
Switches and Controls ................................................................
Lighting Control .....................................................................
Turn and Lane-Change Signals ...............................................
Fog Lights ............................................................................
Windshield Wipers and Washer ..............................................
Rear Window Defroster ...........................................................
Horn ........................................................................................
Hazard Warning Flasher ..........................................................
HomeLink Wireless Control System ....................................
Some models.
Form No.8AS3-EA-09E
5-60
5-60
5-63
5-64
5-64
5-68
5-69
5-70
5-70
5-1
Driving Your Mazda
Starting and Driving

Ignition Switch
With advanced key
Refer to Starting the engine (page 3-10)
for information on how to use the ignition
switch.
Automatic transaxle
To turn the key from the ACC to the
LOCK position, the shift lever must be in
the P position.
qIgnition Switch Positions

(Without Advanced Key)
Shift lever
engaged in P
(park)
LOCK
The steering wheel locks to protect
against theft. Only in this position can the
key be removed.
Manual transaxle
To turn the key from the ACC to the
LOCK position, push the key in at the
ACC position, then turn it to the LOCK
position.
Push the key
5-2
Some models.
Form No.8AS3-EA-09E
Driving Your Mazda

WARNING
Remove the key only when the vehicle
is parked:
Removing the key from the ignition
switch while the vehicle is moving is
dangerous. Removing the key allows
the steering wheel to lock. You will
lose steering control and a serious
accident could occur.
battery down.
ON
This is the normal running position after
the engine is started. Some indicator
lights/warning lights should be inspected
before the engine is started (page 5-43).
NOTE
When the ignition switch is turned to the ON
position, the sound of the fuel pump motor
operating near the fuel tank can be heard. This
does not indicate an abnormality.
START
The engine is started in this position. It
will crank until you release the key. It
then returns to the ON position.
qIgnition Key Reminder

If the ignition is switched to off (LOCK)
or ACC with the key inserted, a
continuous beep sound will be heard
when the driver's door is opened.
NOTE
If turning the key is difficult, jiggle the steering
wheel from side to side.
Leaving the key in any position but LOCK
position also disables some of the security
features and may run the battery down.
ACC (Accessory)
The steering wheel unlocks and some
electrical accessories will operate.
5-3
Form No.8AS3-EA-09E
Driving Your Mazda

CAUTION
Starting the Engine
Do not try the starter for more than

10 seconds at a time. If the engine
stalls or fails to start, wait 10 seconds
before trying again. Otherwise, you
may damage the starter and drain
the battery.
With advanced key

Refer to Starting the engine (page 3-10)
for information on how to start the engine.
NOTE
Engine-starting is controlled by the spark
ignition system.
This system meets all Canadian InterferenceCausing Equipment Standard requirements
regulating the impulse electrical field strength
of radio noise.
6. After starting the engine, let it idle for

about 10 seconds.
NOTE
l
1. Occupants should fasten their seat

belts.
2. Make sure the parking brake is on.
3. Depress the brake pedal.

Depress the clutch pedal all the way
and shift into neutral.
Keep the clutch pedal depressed while
cranking the engine.
Put the vehicle in park (P). If you must
restart the engine while the vehicle is
moving, shift into neutral (N).
NOTE
(Manual transaxle)
The starter will not operate unless the clutch is
depressed sufficiently.
The starter will not operate if the shift lever is
not in P or N.
5. Turn the ignition switch to the START

position and hold (up to 10 seconds at
a time) until the engine starts.
5-4
Form No.8AS3-EA-09E
In extremely cold weather or after the

vehicle has not been driven in several days,
let the engine warm up without operating
the accelerator.
Whether the engine is cold or warm, it
should be started without use of the
accelerator.
If the engine does not start the first time,
refer to Starting a Flooded Engine under
Emergency Starting. If the engine still does
not start, have your vehicle inspected by an
Authorized Mazda Dealer (page 7-13).
Driving Your Mazda

Brake System
qFoot Brake
Your Mazda has power-assisted brakes
that adjust automatically through normal
use.
Should power-assist fail, you can stop by
applying greater force than normal to the
brake pedal. But the distance required to
stop will be greater than usual.
WARNING
Do not coast with the engine stalled or
turned off, find a safe place to stop:
Coasting with the engine stalled or
turned off is dangerous. Braking will
require more effort, and the brake's
power-assist could be depleted if you
pump the brake. This will cause
longer stopping distances or even an
accident.
Shift to a lower gear when going down
steep hills:
Driving with your foot continuously
on the brake pedal or steadily
applying the brakes for long
distances is dangerous. This causes
overheated brakes, resulting in
longer stopping distances or even
total brake failure. This could cause
loss of vehicle control and a serious
accident. Avoid continuous
application of the brakes.
Dry brakes that have become wet by
driving very slowly and applying the
brakes lightly until brake performance
is normal:
been affected.
5-5
Form No.8AS3-EA-09E
Driving Your Mazda

qParking Brake
WARNING
battery down.
CAUTION
Driving with the parking brake on
will cause excessive wear of the brake
linings or pads.
NOTE
For parking in snow, refer to Winter Driving
(page 4-8) regarding parking brake use.
5-6
Form No.8AS3-EA-09E
Setting the parking brake

Depress the brake pedal and then firmly
pull the parking brake lever fully upwards
with sufficient force to hold the vehicle in
a stationary position.
Releasing the parking brake

Depress the brake pedal and pull the
parking brake lever upwards, then press
the release button. While holding the
button, lower the parking brake lever all
the way down to the released position.
Driving Your Mazda

qBrake System Warning Light
NOTE
Having to add brake fluid is sometimes an
indicator of leakage. Consult an Authorized
Mazda Dealer as soon as possible even if the
brake light is no longer illuminated.
WARNING
This warning has the following functions:
Parking brake warning
The light illuminates when the parking
brake is applied with the ignition switched
to START or ON. It turns off when the
parking brake is fully released.
Low brake fluid level warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
Drive to the side of the road and park off
the right-of-way.
You may notice that the pedal is harder to
depress or that it may go closer to the
floor. In either case, it will take longer to
stop the vehicle.
1. With the engine stopped, open the
hood and check the brake fluid level
immediately, and then add fluid if
required (page 8-22).
2. After adding fluid, check the light
again.
Do not drive with the brake system

warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:
Driving with the brake system
warning light illuminated is
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.
qAnti-Lock Brake System (ABS)

The ABS control unit continuously
monitors the speed of each wheel. If one
is about to lock up, the ABS responds by
automatically releasing and reapplying
that wheel's brake.
The driver will feel a slight vibration in
the brake pedal and may hear a chattering
noise from the brake system. This is
normal when the ABS operates. Continue
to depress the brake pedal without
pumping the brakes.
If the warning light remains on, or if the

brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Even if the light turns off have your brake
system inspected as soon as possible by
5-7
Form No.8AS3-EA-09E
Driving Your Mazda

WARNING
Do not rely on ABS as a substitute for
safe driving:
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident.
If the ABS warning light stays on while

you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
Should this happen, consult an Authorized
NOTE
l
NOTE
l
Braking distances may be longer on loose

surfaces (snow or gravel, for example)
which usually have a hard foundation. A
vehicle with a normal braking system may
require less distance to stop under these
conditions because the tires will build up a
wedge of surface layer when the wheels
skid.
The sound of the ABS operating may be
heard when starting the engine or
immediately after starting the vehicle.
However, it does not indicate a malfunction.
When the engine is jump-started to charge

the battery, uneven rpm occurs and the ABS
warning light may illuminate. If this occurs,
it is the result of the weak battery and does
not indicate an ABS malfunction.
Recharge the battery.
(With DSC vehicles)
The brake assist system does not operate
while the ABS warning light is illuminated.
qElectronic Brake Force

Distribution System Warning
qABS Warning Light
The warning light stays on for a few

seconds when the ignition is switched
ON.
5-8
Form No.8AS3-EA-09E
If the electronic brake force distribution

control unit determines that some
components are operating incorrectly, the
control unit may illuminate the brake
system warning light and the ABS
warning light on simultaneously. The
problem is likely to be the electronic
brake force distribution system.
Driving Your Mazda

WARNING
Do not drive with both the ABS warning
light and brake warning light
illuminated. Have the vehicle towed to
an Authorized Mazda Dealer to have
the brakes inspected as soon as
possible:
Driving when the brake system
warning light and ABS warning light
are illuminated simultaneously is
dangerous.
When both lights are illuminated, the
rear wheels could lock more quickly
in an emergency stop than under
normal circumstances.
NOTE
l
qBrake Assist
During emergency braking situations
when it is necessary to depress the brake
pedal with greater force, the brake assist
system provides braking assistance, thus
enhancing braking performance.
When the brake pedal is depressed hard or
depressed more quickly, the brakes apply
more firmly.

depressed more quickly, the pedal will feel
softer but the brakes will apply more firmly.
This is a normal effect of the brake assist
operation and does not indicate an
abnormality.
(Without DSC vehicles)
depressed more quickly, a clicking noise
from the brake booster may be heard. This
is a normal effect of the brake assist and
does not indicate an abnormality.
(With DSC vehicles)
depressed more quickly, a motor/pump
operation noise may be heard. This is a
normal effect of the brake assist and does
not indicate an abnormality.
The brake assist equipment does not
supersede the functionality of the vehicle's
main braking system.
qBrake Pad Wear Indicator

When the disc brake pads become worn,
the built-in wear indicators contact the
disc plates. This causes a screeching noise
to warn that the pads should be replaced.
When you hear this noise, consult an

possible.
5-9
Form No.8AS3-EA-09E
Driving Your Mazda

WARNING
Do not drive with worn disc pads:
Driving with worn disc pads is
dangerous. The brakes could fail and
cause a serious accident. As soon as
you hear a screeching noise consult
Manual Transaxle Operation

qManual Transaxle Shift Pattern
Neutral position
The shift pattern of the transaxle is

conventional, as shown.
Depress the clutch pedal all the way down
while shifting; then release it slowly.
Your vehicle is equipped with a device to
prevent shifting to R (reverse) by mistake.
Push the shift lever downward and shift to
R.
5-10
Form No.8AS3-EA-09E
Driving Your Mazda

WARNING
Do not use sudden engine braking on
slippery road surfaces or at high
speeds:
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed
could cause the tires to skid. This
could lead to loss of vehicle control
and an accident.
Be sure to leave the shift lever in 1 or R
position and set the parking brake
when leaving the vehicle unattended:
Otherwise the vehicle could move
and cause an accident.
CAUTION
Keep your foot off the clutch pedal
except when shifting gears. Also,
do not use the clutch to hold the
vehicle on an upgrade. Riding the
clutch will cause needless clutch
wear and damage.
Do not apply any excessive lateral
force to the gear lever when
changing from 5th to 4th gear.
This could lead to the accidental
selection of 2nd gear, which can
result in damage to the transaxle.
Make sure the vehicle comes to a
complete stop before shifting to R.
Shifting to R while the vehicle is
still moving may damage the
transaxle.
qRecommendations for Shifting

Upshifting
For normal acceleration, we recommend these shift
points.
Gear
1 to 2
2 to 3
3 to 4
4 to 5
5 to 6
Vehicle speed
24 km/h (15 mph)
43 km/h (27 mph)
56 km/h (35 mph)
72 km/h (45 mph)
90 km/h (56 mph)
For cruising
Gear
1 to 2
2 to 3
3 to 4
4 to 5
5 to 6
Vehicle speed
16 km/h (10 mph)
32 km/h (20 mph)
48 km/h (30 mph)
60 km/h (37 mph)
71 km/h (44 mph)
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork. This
reduces the chance of stalling and gives
better acceleration when you need more
speed.
On a steep downgrade, downshifting
helps maintain safe speed and prolongs
brake life.
NOTE
If shifting to R is difficult, shift back into
neutral, release the clutch pedal, and try
again.
5-11
Form No.8AS3-EA-09E
Driving Your Mazda

Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress the brake pedal to shift (The ignition
must be switched to ACC or ON).
Indicates the shift lever can be shifted freely into any position.
NOTE
The Sport AT has an option that is not included in the traditional automatic transaxle giving the
driver the option of selecting each gear instead of leaving it to the transaxle to shift gears. Even if
you intend to use the automatic transaxle functions as a traditional automatic, you should also be
aware that you can inadvertently shift into manual shift mode and an inappropriate gear may be
retained as the vehicle speed increases. If you notice the engine speed going higher or hear the
engine racing, confirm you have not accidentally slipped into manual shift mode (page 5-15).
5-12
Form No.8AS3-EA-09E
Driving Your Mazda

qTransaxle Ranges
The shift lever must be in P or N to
operate the starter.
P (Park)
P locks the transaxle and prevents the
front wheels from rotating.
WARNING
Always set the shift lever to P and set
the parking brake:
Only setting the shift lever to the P
position without using the parking
brake to hold the vehicle is
dangerous. If P fails to hold, the
vehicle could move and cause an
accident.
CAUTION
Shifting into P, N or R while the
vehicle is moving can damage
your transaxle.
Shifting into a driving gear or
reverse when the engine is running
faster than idle can damage the
transaxle.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 4-8).
N (Neutral)
In N, the wheels and transaxle are not
locked. The vehicle will roll freely even
on the slightest incline unless the parking
brake or brakes are on.
WARNING
If the engine is running faster than idle,
do not shift from N or P into a driving
gear:
It's dangerous to shift from N or P
into a driving gear when the engine
is running faster than idle. If this is
done, the vehicle could move
suddenly, causing an accident or
serious injury.
Do not shift into N when driving the
vehicle:
Shifting into N while driving is
dangerous. Engine braking cannot be
applied when decelerating which
could lead to an accident or serious
injury.
CAUTION
Do not shift into N when driving the
vehicle. Doing so can cause transaxle
damage.
NOTE
Apply the parking brake or depress the brake
pedal before moving the shift lever from N to
prevent the vehicle from moving unexpectedly.
D (Drive)
D is the normal driving position. From a
stop, the transaxle will automatically shift
through a 5-gear/6-gear* sequence.
* 3.7-liter engine
M (Manual)
M is the manual shift mode position.
Gears can be shifted up or down by
operating the shift lever.
Refer to Manual Shift Mode (page 5-15).
5-13
Form No.8AS3-EA-09E
Driving Your Mazda

qActive Adaptive Shift (AAS)
Active Adaptive Shift (AAS)
automatically controls the transaxle shift
points to best suit the road conditions and
driver input. This optimizes engine
performance and improves driving
comfort. When cornering the vehicle,
AAS mode will hold the transaxle in the
gear the vehicle was in before entering the
curve, allowing the vehicle to be
accelerated from the same gear after
exiting the curve.
If the driver accelerates rapidly, or
accelerates and decelerates rapidly by
operating the accelerator and brake pedal
for a certain period of time while the
selector lever is in the D position, AAS
mode could activate. When this occurs,
AAS mode will maintain the transaxle in
the optimum gear and the driver may
sense that the transaxle is not shifting,
however this does not indicate an
abnormality.
NOTE
l
When the ignition is switched off (LOCK),

the shift lever cannot be shifted from P.
To be sure the vehicle is in park, the
ignition key cannot be removed unless the
shift lever is in P.
(With Advanced Key)
The ignition cannot be switched from ACC
to off (LOCK) when the shift lever is not in
P.
qShift-Lock Override
If the shift lever will not move from P
using the proper shift procedure, continue
to hold down the pedal.
1. Remove the shift-lock override cover
using a cloth-wrapped flat head
screwdriver.
2. Insert a screwdriver and push it down.
Cover
qShift-Lock System
The shift-lock system prevents shifting
out of P unless the brake pedal is
depressed.
To shift from P:
1. Depress and hold the brake pedal.
2. Start the engine.
3. Move the shift lever.
3. Move the shift lever.
4. Take the vehicle to an Authorized

Mazda Dealer to have the system
checked.
5-14
Form No.8AS3-EA-09E
Driving Your Mazda

qManual Shift Mode
Indicators
This mode gives you the feel of driving a

manual transaxle vehicle by operating the
shift lever and allows you to control
engine rpm and torque to the front wheels
much like a manual transaxle when more
control is desired.
Shift position indicator
To change to manual shift mode, shift the

lever from D to M.
The numeral for the selected gear

illuminates.
In manual shift mode, the M of the shift

position indicator in the instrument panel
illuminates.
Gear position indicator
NOTE
Shift position indicator
Changing to manual mode can be done while

driving the vehicle with no damage occurring
to the transaxle.
D range/gear position indicator
NOTE
l
To return to automatic shift mode, shift

the lever from M to D.
NOTE
l
If you change to manual shift mode when

the vehicle is stopped, the gear will shift to
M1.
If you change to manual shift mode without
depressing the accelerator pedal when
driving in D range, 5th gear, the gear will
shift to M4.
(3.7-liter engine model)
If you change to manual shift mode without
depressing the accelerator pedal when
driving in D range, 6th gear, the gear will
shift to M5.
If the gears cannot be shifted down when

driving at higher speeds, the gear position
indicator will flash twice to signal that the
gears cannot be shifted down.
If the automatic transaxle fluid (ATF)
temperature becomes too high, there is the
possibility that the transaxle will switch to
automatic shift mode, canceling manual
shift mode and turning off the gear position
indicator illumination. This is a normal
function to protect the AT. After the ATF
temperature has decreased, the gear
position indicator illumination turns back
on and driving in manual shift mode is
restored.
5-15
Form No.8AS3-EA-09E
Driving Your Mazda

Shifting
Manually Shifting down
Manually Shifting up
(M1 M2 M3 M4 M5
M6 )
To shift up to a higher gear, tap the shift
lever back ( ) once.
( M6 M5 M4 M3 M2
M1)
To shift down to a lower gear, tap the shift
lever forward ( ) once.
WARNING
NOTE
l
When driving slowly, the gears may not

shift up depending on vehicle speed.
In manual shift mode, gears do not shift up
automatically. Do not run the engine with
the tachometer needle in the RED ZONE. If
the tachometer needle enters the RED
ZONE, you may feel engine-braking
because the fuel delivery will be stopped to
protect the engine. However, this does not
indicate an abnormality.
When depressing the accelerator fully, the
transaxle will shift to a lower gear,
depending on vehicle speed.
Do not use engine braking on slippery

road surfaces or at high speeds:
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed
could cause the tires to skid. This
could lead to loss of vehicle control
and an accident.
NOTE
l
5-16
Some models.
Form No.8AS3-EA-09E
When driving at high speeds, the gear may

not shift down depending on vehicle speed.
During deceleration, the gear may
automatically shift down depending on
vehicle speed.
When depressing the accelerator fully, the
transaxle will shift to a lower gear,
depending on vehicle speed.
Driving Your Mazda

Second gear fixed mode
Shifting down
When the shift lever is tapped back ( )

while the vehicle is stopped or driven at
about 10 km/h (6 mph) or less, the
transaxle is set in the second gear fixed
mode. The gear is fixed in second while in
this mode for easier starting and driving
on slippery roads. If the shift lever is
tapped back ( ) or forward ( ) while in
the second gear fixed mode, the mode will
be canceled.
If the vehicle speed is higher than the

speed specified for each gear, the gear
cannot be shifted to a lower gear so as to
protect the transaxle.
Shifting specification
Shifting up
Gear
M6M5
M5M4
M4M3
M3M2
M2M1
If the vehicle speed is lower than the

speed specified for each gear, the gear
cannot be shifted up to a higher gear.
Gear
M1M2
M2M3
M3M4
M4M5
Vehicle speed
You can shift up to M2 whether
the vehicle is stopped or
moving.
20.5 km/h (12.8 mph)
33.9 km/h (21.1 mph)
34.1 km/h (21.2 mph)

Gear
M1M2
M2M3
M3M4
M4M5
M5M6
Vehicle speed
You can shift up to M2 whether
the vehicle is stopped or
moving.
15 km/h (10 mph)
30.8 km/h (19.2 mph)
42.1 km/h (26.2 mph)
54.4 km/h (33.9 mph)

Gear
M5M4
M4M3
M3M2
M2M1
Vehicle speed
190 km/h (118 mph)
135.1 km/h (83.9 mph)
89.7 km/h (55.7 mph)
44.9 km/h (27.8 mph)
Vehicle speed
230 km/h (142 mph)
187.3 km/h (116.3 mph)
130 km/h (80 mph)
82 km/h (50 mph)
40.7 km/h (25.2 mph)
During deceleration, the gears shift down

automatically when speed is reduced to
the following:
Gear
M5 or M4M3
M3 or M2M1
Vehicle speed
30.8 km/h (19.1 mph)
10 km/h (6 mph)

Gear
M6M5
M5M4
M4M3
M3 or M2M1
Vehicle speed
51.4 km/h (31.9 mph)
39.1 km/h (24.2 mph)
27.8 km/h (17.2 mph)
7.2 km/h (4.4 mph)
NOTE
The gear does not shift down to M1
automatically while in the second gear fixed
mode.
5-17
Form No.8AS3-EA-09E
Driving Your Mazda

If the vehicle is kicked down at the
following speeds or lower, the gears shift
down automatically:
On a steep downgrade, downshifting

helps maintain safe speed and prolongs
brake life.

Gear
M5M4
M4M3
M3M2
Vehicle speed
180 km/h (111 mph)
126 km/h (78 mph)
49.4 km/h (30.6 mph)

Gear
M6M5
M5M4
M4M3
M3M2
Vehicle speed
230 km/h (142 mph)
166 km/h (103 mph)
72 km/h (44 mph)
47 km/h (29 mph)
Recommendations for shifting

Upshifting
For normal acceleration and cruising, we
recommend these shift points.
Gear
M1 to M2
M2 to M3
M3 to M4
M4 to M5
Vehicle speed
24 km/h (15 mph)
40 km/h (25 mph)
65 km/h (40 mph)
73 km/h (45 mph)

Gear
M1 to M2
M2 to M3
M3 to M4
M4 to M5
M5 to M6
Vehicle speed
24 km/h (15 mph)
40 km/h (25 mph)
65 km/h (40 mph)
73 km/h (45 mph)
80 km/h (50 mph)
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork. This
gives better acceleration when you need
more speed.
5-18
Form No.8AS3-EA-09E
qDriving Tips
WARNING
Do not allow the vehicle to move in
reverse on an up-slope while the
selector lever is in a forward gear
position, or move forward on a downslope while the selector lever is in the
reverse position.
Otherwise, the engine will stop,
causing the loss of the power brake
and power steering functions, and
make it difficult to control the vehicle
which could result in an accident.
Passing
For extra power when passing another
vehicle or climbing steep grades, depress
the accelerator fully. The transaxle will
shift to a lower gear, depending on vehicle
speed.
Climbing steep grades from a stop
To climb a steep grade from a stopped
position:
1. Depress the brake pedal.
2. Shift to D or M1, depending on the
load weight and grade steepness.
3. Release the brake pedal while
gradually accelerating.
Descending steep grades
When descending a steep grade, shift to
lower gears, depending on load weight
and grade steepness. Descend slowly,
using the brakes only occasionally to
prevent them from overheating.
Driving Your Mazda

Power Steering
Cruise Control
Power steering is only operable when the

engine is running. If the engine is off or if
the power steering system is inoperable,
you can still steer, but it requires more
physical effort.
With cruise control, you can set and

automatically maintain any speed of more
than about 32 km/h (20 mph).
If the steering feels stiffer than usual

during normal driving, consult an
CAUTION
Never hold the steering wheel to the
extreme left or right for more than 5
seconds with the engine running.
This could damage the power
steering system.
WARNING
Do not use the cruise control under the
following conditions:
Using the cruise control under the
following conditions is dangerous
and could result in loss of vehicle
control.
Hilly terrain
Steep inclines
Heavy or unsteady traffic
Slippery or winding roads
Similar restrictions that require
inconsistent speed
qCruise Main Indicator Light

(Amber)/Cruise Set Indicator
Light (Green)
The indicator light has two colors.

Cruise Main Indicator Light (Amber)
The indicator light illuminates amber
when the ON/OFF switch is pressed up
and the cruise control system is activated.
Cruise Set Indicator Light (Green)
The indicator light illuminates green when
a cruising speed has been set.
Some models.
Form No.8AS3-EA-09E
5-19
Driving Your Mazda

qActivation/Deactivation
To activate the system, press up on the
ON/OFF switch.
The cruise main indicator light
illuminates.
3. Immediately release the cruise control

SET+/SET- switch by pressing it up or
down when the vehicle reaches the
desired speed. Release the accelerator
pedal simultaneously.
To deactivate the system, press down on

the ON/OFF switch.
The cruise main indicator light turns off.
Cruise control switch
NOTE
l
WARNING
Keep the ON/OFF switch off when
cruise control is not in use:
Leaving the ON/OFF switch on when
not using the cruise control is
dangerous as you may hit one of the
other buttons and put the vehicle in
cruise control unexpectedly. This
could result in loss of vehicle control.
qTo Set Speed

1. Activate the cruise control system by
momentarily pressing up the ON/OFF
switch.
2. Accelerate to the desired speed, which
must be more than 32 km/h (20 mph).
5-20
Form No.8AS3-EA-09E
Release the cruise control switch at the

desired speed, otherwise the speed will
continue increasing while the switch is
pulled up, and continue decreasing while it
is pulled down (except when the accelerator
pedal is depressed).
On a steep grade, the vehicle may
momentarily slow down while ascending,
or speed up while descending.
Cruise control will turn off if vehicle speed
drops below about 27 km/h (17 mph) when
cruise is activated, such as when climbing a
steep grade.
Driving Your Mazda

qTo Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Press up the cruise control SET + switch
and hold it. Your vehicle will accelerate.
Release the switch at the speed you want.
To increase speed using accelerator

pedal
Depress the accelerator pedal to accelerate
to the desired speed.
Press down or press up on the cruise
control SET +/SET - switch and release it
immediately.

NOTE
Your vehicle has a tap-up feature that
allows you to increase your current speed
in increments of 1.6 km/h (1 mph) by a
momentary tap of the cruise control SET
+ switch. Multiple taps will increase your
vehicle speed 1.6 km/h (1 mph) for each
tap.
Accelerate if you want to speed up temporarily

when the cruise control is on. Greater speed
will not interfere with or change the set speed.
Take your foot off the accelerator to return to
the set speed.
qTo Decrease Cruising Speed

Press down the cruise control SET switch and hold it. The vehicle will
gradually slow.
Release the switch at the speed you want.
5-21
Form No.8AS3-EA-09E
Driving Your Mazda

Your vehicle has a tap-down feature that
allows you to decrease your current speed
in decrements of 1.6 km/h (1 mph) by a
momentary tap of the cruise control SET switch. Multiple taps will decrease your
vehicle speed 1.6 km/h (1 mph) for each
tap.
Press the CANCEL switch.
qTo Resume Cruising Speed at

More Than 32 km/h (20 mph)
If some other method besides the ON/
OFF switch was used to cancel cruising
speed (such as applying the brake pedal)
and the system is still activated, the most
recent set speed will automatically resume
when the RESUME switch is pressed.
If vehicle speed is below 32 km/h (20
mph), increase the vehicle speed up to 32
km/h (20 mph) or more and press the
RESUME switch.
qTo Cancel
To cancel the system, use one of these
methods:
l Pull down the ON/OFF switch.
l Slightly depress the brake pedal.
l Depress the clutch pedal (Manual
transaxle only).
5-22
Form No.8AS3-EA-09E
The system turns off when the ignition is

off.
NOTE
Cruise control will cancel at about 15 km/h (9
mph) below the preset speed (such as may
happen when climbing a long, steep grade).
Driving Your Mazda

Traction Control System
(TCS)
The Traction Control System (TCS)
enhances traction and safety by
controlling engine torque and braking*.
When the TCS detects driving wheel
slippage, it lowers engine torque and
operates the brakes* to prevent loss of
traction.
This means that on a slick surface, the
engine adjusts automatically to provide
optimum power to the drive wheels
without causing them to spin and lose
traction.
* DSC-equipped vehicles only
WARNING
Do not rely on the traction control
system as a substitute for safe driving:
The traction control system (TCS)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road
contact because of water on the road
surface). You can still have an
accident.
qTCS/DSC Indicator Light
This indicator light stays on for a few

ON. If the TCS or DSC* is operating, the
indicator light flashes.
If the light stays on, the TCS, DSC* or the
brake assist system* may have a
malfunction and they may not operate
correctly. Take your vehicle to an
*
DSC-equipped vehicles only
NOTE
l
In addition to the indicator light flashing, a

slight lugging sound will come from the
engine. This indicates that the TCS is
operating properly.
On slippery surfaces, such as fresh snow, it
will be impossible to achieve high rpm
when the TCS is on.
Use snow tires and drive at reduced

speeds when roads are covered with ice
and/or snow:
Driving without proper traction
devices on snow and/or ice-covered
roads is dangerous. The traction
control system (TCS) alone cannot
provide adequate traction and you
could still have an accident.
5-23
Form No.8AS3-EA-09E
Driving Your Mazda

qTCS OFF Indicator Light
qTCS OFF Switch

Press the TCS OFF switch to turn off the
TCS. The TCS OFF indicator light will
illuminate.

ON.
It also illuminates when the TCS OFF
switch is pressed and TCS is switched off.
Refer to TCS OFF Switch on page 5-24.
If the light remains illuminated and the
TCS is not switched off, take your vehicle
to an Authorized Mazda Dealer. The TCS
may have a malfunction.
NOTE
(3.7-liter engine)
If the battery is disconnected or a fuse is
replaced, the TCS will be inoperable. When
this happens, the TCS OFF indicator light
flashes and the TCS indicator light illuminates.
To reactivate the TCS, perform the following
procedure with the battery connected.
Press the switch again to turn the TCS

back on. The TCS OFF indicator light
will turn off.
NOTE
l
1. Switch the ignition ON

l
2. Turn the steering clockwise fully, then turn

it counterclockwise fully.
3. Make sure the TCS OFF indicator light and
TCS indicator light turn off.
If the TCS indicator light and the TCS OFF
indicator light remain illuminated even after
switching the ignition ON, attempt the
procedure again. If this still does not work,
consult an Authorized Mazda Dealer.
5-24
Some models.
Form No.8AS3-EA-09E
When TCS is on and you attempt to free the

vehicle when it is stuck, or drive it out of
freshly fallen snow, the TCS will activate.
Depressing the accelerator will not
increase engine power and freeing the
vehicle may be difficult. When this happens,
turn off the TCS.
(DSC-equipped vehicles)
Press the DSC OFF switch to turn off the
TCS (page 5-26).
If the TCS is off when the engine is turned
off, it automatically activates when the
ignition switch is turned on.
Leaving the TCS on will provide the best
traction.
Driving Your Mazda

Dynamic Stability Control
(DSC)
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such
as ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive maneuvering,
enhancing vehicle safety.
Refer to ABS (page 5-7) and TCS (page
5-23).
DSC operation is possible at speeds
greater than15 km/h (9 mph).
CAUTION
The DSC may not operate correctly
unless the following are observed:
Use tires of the correct size
specified for your Mazda on all
four wheels.
Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.
Do not mix worn tires.
The DSC may not operate correctly
when a temporary spare tire is
installed because the tire diameter
changes.
WARNING
Do not rely on the dynamic stability
control as a substitute for safe driving:
The dynamic stability control (DSC)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road
contact because of water on the road
surface). You can still have an
accident.

ON. If the TCS or DSC is operating, the
If the light stays on, the TCS, DSC or the
brake assist system may have a
Some models.
Form No.8AS3-EA-09E
5-25
Driving Your Mazda

qDSC OFF Indicator Light
qDSC OFF Switch

Press the DSC OFF switch to turn off the
TCS/DSC. The DSC OFF indicator light
will illuminate.

ON.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-26).
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
NOTE
replaced, the DSC will be inoperable. In this
case, the DSC OFF indicator light flashes and
the TCS/DSC indicator light illuminates.
To make the DSC operable, do the following
Press the switch again to turn the TCS/

DSC back on. The DSC OFF indicator
light will go out.
NOTE
l

l

3. Make sure the DSC OFF indicator and the
TCS/DSC indicator go off.
If the TCS/DSC indicator light and the DSC
OFF indicator light remain illuminated even
after switching the ignition ON, consult an
5-26
Form No.8AS3-EA-09E
When DSC is on and you attempt to free the

vehicle when it is stuck, or drive it out of
freshly fallen snow, the TCS (part of the
DSC system) will activate. Depressing the
accelerator will not increase engine power
and freeing the vehicle may be difficult.
When this happens, turn off the TCS/DSC.
If the TCS/DSC is off when the engine is
turned off, it automatically activates when
the ignition is switched on.
Leaving the TCS/DSC on will provide the
best stability.
Driving Your Mazda

Tire Pressure Monitoring System
The tire pressure monitoring system (TPMS) monitors the pressure for each tire.
If tire pressure is too low in one or more tires, the system will inform the driver via the
warning light in the instrument panel and by the warning beep sound.
The tire pressure sensors installed on each wheel send tire pressure data by radio signal to
the receiver unit in the vehicle.
Tire pressure sensors
NOTE
When the ambient temperature is low due to seasonal changes, tire temperatures are also lower.
When the tire temperature decreases, the air pressure decreases as well. The TPMS warning light
may illuminate more frequently. Visually inspect the tires daily before driving, and check tire
pressures monthly with a tire pressure gauge. When checking tire pressures, use of a digital tire
pressure gauge is recommended.
TPMS does not alleviate your need to check the pressure and condition of all four tires
regularly.
Some models.
Form No.8AS3-EA-09E
5-27
Driving Your Mazda

CAUTION
Each tire, including the spare (if provided), should be checked monthly when cold
and inflated to the inflation pressure recommended by the vehicle manufacturer
on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a
different size than the size indicated on the vehicle placard or tire inflation
pressure label, you should determine the proper tire inflation pressure for those
tires.)
As an added safety feature, your vehicle has been equipped with a tire pressure
monitoring system (TPMS) that illuminates a low tire pressure telltale when one
or more of your tires is significantly under-inflated. Accordingly, when the low tire
pressure telltale illuminates, you should stop and check your tires as soon as
possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Under-inflation
also reduces fuel efficiency and tire tread life, and may affect the vehicle's
handling and stopping ability.
Please note that the TPMS is not a substitute for proper tire maintenance, and it
is the driver's responsibility to maintain correct tire pressure, even if underinflation has not reached the level to trigger illumination of the TPMS low tire
pressure telltale.
Your vehicle has also been equipped with a TPMS malfunction indicator to
indicate when the system is not operating properly.
The TPMS malfunction indicator is combined with the low tire pressure telltale.
When the system detects a malfunction, the telltale will flash for approximately
one minute and then remain continuously illuminated. This sequence will
continue upon subsequent vehicle start-ups as long as the malfunction exists.
When the malfunction indicator is illuminated, the system may not be able to
detect or signal low tire pressure as intended. TPMS malfunctions may occur for a
variety of reasons, including the installation of replacement or alternate tires or
wheels on the vehicle that prevent the TPMS from functioning properly. Always
check the TPMS malfunction telltale after replacing one or more tires or wheels on
your vehicle to ensure that the replacement or alternate tires and wheels allow
the TPMS to continue to function properly.
To avoid false readings, the system samples for a little while before indicating a
problem. As a result it will not instantaneously register a rapid tire deflation or
blow out.
NOTE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
5-28
Form No.8AS3-EA-09E
Driving Your Mazda

qTire Pressure Monitoring System
Warning Light
This warning light illuminates for a few

ON.
Thereafter, the warning light illuminates
and a beep is heard when tire pressure is
too low in one or more tires, and flashes
when there is a system malfunction.
WARNING
If the tire pressure monitoring system
warning light illuminates or flashes, or
the tire pressure warning beep sound is
heard, decrease vehicle speed
immediately and avoid sudden
maneuvering and braking:
warning light illuminates or flashes,
or the tire pressure warning beep
sound is heard, it is dangerous to
drive the vehicle at high speeds, or
perform sudden maneuvering or
braking. Vehicle drivability could
worsen and result in an accident.
To determine if you have a slow leak
or a flat, pull over to a safe position
where you can check the visual
condition of the tire and determine if
you have enough air to proceed to a
place where air may be added and
the system monitored again, an
Authorized Mazda Dealer or a tire
repair station.
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is
dangerous, even if you know why it is
illuminated. Have the problem taken
care of as soon as possible before it
develops into a more serious
situation that could lead to tire
failure and a dangerous accident.
Warning light illuminates/Warning
beep sounds
When the warning light illuminates, and
the warning beep sound is heard (about 3
seconds), tire pressure is too low in one or
more tires.
5-29
Form No.8AS3-EA-09E
Driving Your Mazda

Adjust the tire pressure to the correct tire
pressure. Refer to the specification charts
(page 10-7).
NOTE
l
CAUTION
When replacing/repairing the tires or
wheels or both, have the work done
by an Authorized Mazda Dealer, or
the tire pressure sensors may be
damaged.
5-30
Form No.8AS3-EA-09E
Perform tire pressure adjustment when the

tires are cold. Tire pressure will vary
according to the tire temperature, therefore
let the vehicle stand for 1 hour or only drive
it 1.6 km (1 mile) or less before adjusting
the tire pressures. When pressure is
adjusted on hot tires to the cold inflation
pressure, the TPMS warning light/beep may
turn on after the tires cool and pressure
drops below specification.
Also, an illuminated TPMS warning light,
resulting from the tire air pressure dropping
due to cold ambient temperature, may turn
off if the ambient temperature rises. In this
case, it will also be necessary to adjust the
tire air pressures. If the TPMS warning
light illuminates due to a drop in tire air
pressure, make sure to check and adjust the
tire air pressures.
After adjusting the tire air pressures, it may
require some time for the TPMS warning
light to turn off. If the TPMS warning light
remains illuminated, drive the vehicle at a
speed of at least 25 km/h (16 mph) for 10
minutes, and then verify that it turns off.
Tires loose air naturally over time and the
TPMS cannot tell if the tires are getting too
soft over time or you have a flat. However,
when you find one low tire in a set of fourthat is an indication of trouble; you should
have someone drive the vehicle slowly
forward so you can inspect any low tire for
cuts and any metal objects sticking through
tread or sidewall. Put a few drops of water
in the valve stem to see if it bubbles
indicating a bad valve. Leaks need to be
addressed by more than simply refilling the
trouble tire as leaks are dangerous - take it
to an Authorized Mazda Dealer which has
all the equipment to fix tires, TPMS systems
and order the best replacement tire for your
vehicle.
Driving Your Mazda

If the warning light illuminates again even
after the tire pressures are adjusted, there
may be a tire puncture. Replace the
punctured tire with the temporary spare
tire (page 7-6).
NOTE
qTires and Wheels
CAUTION
When inspecting or adjusting the tire
air pressures, do not apply excessive
force to the stem part of the wheel
unit. The stem part could be
damaged.
A tire pressure sensor is not installed to the

temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used.
Changing tires and wheels
Warning light flashes

When the warning light flashes, there may
be a system malfunction. Consult an
The following procedure allows the

TPMS to recognize a tire pressure sensor's
unique ID signal code whenever tires or
wheels are changed, such as changing to
and from winter tires.
qSystem Error Activation

A system error activation may occur in
the following cases:
l When there is equipment or a device
near the vehicle using the same radio
frequency as that of the tire pressure
sensors.
l When using the following devices in
the vehicle that may cause radio
interference with the receiver unit.
A digital device such as a personal
computer.
A current converter device such as a
DC-AC converter.
l When excess snow or ice adheres to
the vehicle, especially around the
wheels.
l When the tire pressure sensor batteries
are exhausted.
l When using a wheel with no tire
pressure sensor installed.
l When using tires with steel wire
reinforcement in the side walls.
NOTE
Each tire pressure sensor has a unique ID
signal code. The signal code must be
registered with the TPMS before it can work.
The easiest way to do it is to have an
Authorized Mazda Dealer change your tire and
complete ID signal code registration.
When having tires changed at an

Authorized Mazda Dealer
Tire pressure sensor ID signal code
registration is completed when an
Authorized Mazda Dealer changes your
vehicle's tires.
When changing tires yourself

If you or someone else changes tires, you
or someone else can also undertake the
steps for the TPMS to complete the ID
signal code registration.
1. After tires have been changed, switch
the ignition ON, then back to ACC or
off (LOCK).
2. Wait for about 15 minutes.
5-31
Form No.8AS3-EA-09E
Driving Your Mazda

3. After about 15 minutes, drive the
vehicle at a speed of at least 25 km/h
(16 mph) for 10 minutes and the tire
pressure sensor ID signal code will be
registered automatically.
NOTE
l
NOTE
If the vehicle is driven within about 15 minutes
of changing tires, the tire pressure monitoring
system warning light will flash because the
sensor ID signal code would not have been
registered. If this happens, park the vehicle for
about 15 minutes, after which the sensor ID
signal code will register upon driving the
vehicle for 10 minutes.
Replacing tires and wheels
CAUTION
When replacing/repairing the tires
or wheels or both, have the work
done by an Authorized Mazda
Dealer, or the tire pressure sensors
may be damaged.
The wheels equipped on your
Mazda are specially designed for
installation of the tire pressure
sensors. Do not use non-genuine
wheels, otherwise it may not be
possible to install the tire pressure
sensors.
Be sure to have the tire pressure sensors
installed whenever tires or wheels are
replaced.
When having a tire or wheel or both
replaced, the following types of tire
pressure sensor installations are possible.
l The tire pressure sensor is removed
from the old wheel and installed to the
new one.
l The same tire pressure sensor is used
with the same wheel. Only the tire is
replaced.
5-32
Form No.8AS3-EA-09E
A new tire pressure sensor is installed

to a new wheel.
The tire pressure sensor ID signal code

must be registered when a new tire pressure
sensor is purchased. For purchase of a tire
pressure sensor and registration of the tire
pressure sensor ID signal code, consult an
When reinstalling a previously removed tire
pressure sensor to a wheel, replace the
grommet (seal between valve body/sensor
and wheel) for the tire pressure sensor.
Driving Your Mazda

Blind Spot Monitoring (BSM) System
The Blind Spot Monitoring (BSM) system is designed to assist the driver by monitoring
blind spots on both sides of the vehicle to the rear in certain situations such as when
changing lanes on roads and freeways.
The BSM system monitors the detection areas on both sides of the vehicle to the rear when
the vehicle speed is about 32 km/h (20 mph) or more, and notifies the driver of vehicles in
the detection area by illuminating the BSM warning light.
If the turn signal lever is operated in the direction the BSM warning light is illuminated, the
system warns the driver of the vehicle in the detection area with a beep sound.
Detection areas
WARNING
Do not rely completely on the BSM system and be sure to look over your shoulder
before changing lanes:
The BSM system can assist the driver in confirming the safety of the surroundings
but is not a complete substitute. The driver is responsible for assuring lane changes
and other maneuvers. Always pay attention to the direction in which the vehicle is
traveling and the vehicle's surroundings.
NOTE
l
l
l
The BSM system does not operate when the vehicle speed is lower than about 32 km/h (20 mph).
The radar sensors are equipped inside the rear bumper. (page 5-36)
The radar sensors do not detect human, animal, or static objects such as fences. In addition, the
system pauses when the selector lever is shifted to the R position. (The system resumes
automatically when the selector lever is shifted from the R position.)
Some models.
Form No.8AS3-EA-09E
5-33
Driving Your Mazda

l
The detectability of the radar sensors has its limitations. The BSM system may not operate
properly under the following conditions:
Ice, snow, or soil adheres to the rear bumper surface around the radar sensors.
During adverse weather conditions such as rain or snow, or under conditions where water is
sprayed.
The rear bumper area around the radar sensors is blocked by foreign material (such as
stickers or a bicycle carrier).
The radar sensors may not detect all types of vehicles around your vehicle, especially the
following types of vehicles:
Motorcycles
Vehicles with body shapes that radar may not reflect such as a flatbed trailer with no cargo.
Vehicles with lower body height such as sports cars.
Have the radar sensors inspected at an Authorized Mazda Dealer if any shock is applied to the
rear bumper, even in a minor accident. If the vehicle is driven with a damaged radar sensor, the
system may not operate properly resulting in an accident.
For repairs or paintwork around the radar sensors, or replacement of the bumper, consult an
The radar sensors of the BSM system may be regulated under the radio wave related laws of the
country where the vehicle is driven. The sensors in this system are approved for use in the U.S.A.
(including territories), Canada, and Mexico. If a vehicle with a BSM system is driven in a country
other than the U.S.A., Canada, or Mexico, the system has to be turned off using the BSM OFF
switch.
The detection area of the system has been determined based on the lane width of general
freeways. Therefore on a road with a narrower lane width, the system may detect vehicles on a
lane next to the adjacent lane and operate the warning light/beep. On a road with wider lane
width, the system may not detect vehicles on the adjacent lane and may not operate the warning
light/beep.
Operation of the warning light/beep may be delayed or the system may not operate the warning
light/beep under the following conditions:
The vehicle accelerates from a standing-start with a vehicle alongside.
A vehicle moves from a lane two lanes over to the adjacent lane.
The difference in vehicle speed between your vehicle and another vehicle is larger when
passing or being passed, and the vehicle passes the detection area within a short period of
time.
On a steep incline, or when there is a difference in height between lanes.
Immediately after the system has been activated by pressing the BSM OFF switch again after it
has been turned off (BSM OFF indicator light in instrument panel illuminates) by pressing the
switch.
Although the system may detect objects on the road side such as parked vehicles or guardrails and
operate the warning light/beep, it does not indicate a malfunction.
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can
detect, the system may pause (The BSM OFF indicator light in the instrument panel flashes).
However, it does not indicate a malfunction.
l
l
l
l
l
l
l
l
l
l
5-34
Form No.8AS3-EA-09E
Driving Your Mazda

l
The following conditions may affect the visibility of the BSM warning lights on the outside mirror,
making it difficult to confirm the illumination of the lights:
Ice or snow adheres to the surface of the outside mirrors.
The door window glass is tinted.
l
l
qBSM Warning Light/Beep
BSM warning beep
BSM warning light
The warning beep operates when the turn

signal lever is operated to the side where
the BSM warning light is illuminated.
Equipped on the left and right door

mirrors.
NOTE
The system can be personalized so that the
BSM warning beep does not operate. Refer to
Personalization Features on page 10-8.
qBSM OFF Indicator Light

ON.
If the BSM system detects a vehicle in the
detection area while the vehicle is driven
at a speed of about 32 km/h (20 mph) or
more, the BSM warning light illuminates
on the side of the vehicle where the rear
on-coming vehicle is detected.
NOTE
l
If ice or snow adhere to the outer mirror

surface, the BSM warning light may not be
visible.
If the door window glass is tinted, it may
affect the visibility of the BSM warning
light, making it difficult to confirm the
illumination of the light.
This indicator light illuminates for a few

ON.
The BSM OFF indicator light illuminates
when the BSM system is turned off by
pressing the BSM OFF switch.
The indicator light flashes if the BSM
system has a malfunction. Consult an
NOTE
If the vehicle is driven on a road with less
traffic and few vehicles that the radar sensors
can detect, the system may pause (The BSM
OFF indicator light in the instrument panel
flashes). However, it does not indicate a
malfunction.
5-35
Form No.8AS3-EA-09E
Driving Your Mazda

qBSM OFF Switch
When the BSM switch is pressed, the
BSM system turns off and the BSM OFF
indicator light illuminates.
Always keep the bumper surface near the

radar sensor area clean so that the BSM
system operates normally. Refer to the
Exterior Care (page 8-54).
NOTE
l
The BSM OFF indicator light flashes if the

radar sensors cannot operate normally. If
the light remains flashing after cleaning the
bumper surface near the radar sensor area,
For repairs or paintwork around the radar
sensors, or replacement of the bumper,
qSafety Certification
Radiation Hazard
Press the BSM OFF switch again to turn
on the BSM system. The BSM OFF
indicator light turns off.
NOTE
If the ignition is switched off (LOCK) with the
BSM system turned off, the system becomes
operable automatically when the ignition is
switched ON.
qCare of Radar Sensors

The radar sensors are equipped inside the
rear bumper.
This BSM (blind spot monitoring) device

emits intentional electromagnetic
radiation in the 24 GHz to 25 GHz
frequency range. The total radiated
average power over the entire bandwidth
is below _14 dBm (40 W). The active
emitting antenna surface is 72 cm2;
therefore the radiated power density in
front of the BSM device is 0.55 W/cm2.
This value is far below the legal human
exposure protection limit of 1 mW/
cm2(MPE) in Europe and US.
Declaration of compliance for 24 GHz
blind spot radar
(U.S.A)
FCC ID: KR5SV2008BSD
This vehicle is equipped with a 24 GHz
blind spot monitoring (BSM) radar
system, which complies with part 15 of
the FCC rules. Operation is subject to the
Radar sensors
5-36
Form No.8AS3-EA-09E
1. This device may not cause harmful

interference, and
Driving Your Mazda

2. This device must accept any
interference received, including
interference that may cause undesired
operation.
3. This device may only work when the
vehicle is in operation pursuant to 15.
252 (a) (4).
WARNING
expressively approved by the party
equipment.
(CANADA)
ICDCE2008075 (temporary permission
until RSS-220 is in force)
This vehicle is equipped with a 24 GHz
blind spot monitoring (BSM) radar
system, which complies with the (actually
draft) RSS-220 standard of Industry
Canada. Operation is subject to the
1. This device may not cause harmful
interference, and
2. This device must accept any
operation.
3. This device may only work when the
vehicle is in operation pursuant to
RSS-220 5.2 (b)
(MEXICO)
RLVSISV07-725 (duration: June 18,
2008)
Brand: Siemens VDO
Model: TYPE SV2007 BSD
NOTE
During printing time of this user manual the
approvals listed below are granted. Further
countries may become available or actual
certification identifiers may be subject to
change or update.
5-37
Form No.8AS3-EA-09E
Driving Your Mazda
Instrument Cluster and Indicators

Meters and Gauges
(Black-out meter)
When the ignition is switched ON, the dashboard gauges illuminate.
Speedometer ...................................................................................................... page 5-39

Odometer, Trip Meter and Trip Meter Selector .................................................. page 5-39
Tachometer ........................................................................................................ page 5-40
Engine Coolant Temperature Gauge .................................................................. page 5-40
Fuel Gauge ........................................................................................................ page 5-41
Dashboard Illumination ..................................................................................... page 5-41
Outside Temperature Display ............................................................................. page 5-42
5-38
Form No.8AS3-EA-09E
Driving Your Mazda

qSpeedometer
NOTE
The speedometer indicates the speed of

the vehicle.
qOdometer, Trip Meter and Trip

Meter Selector
The display mode can be changed
between trip meter A and trip meter B by
pressing the selector while one of them is
displayed. The selected mode will be
displayed.
(Standard meter)
The odometer and trip meter can be displayed
as follows even when the ignition is switched
to ACC or off (LOCK).
or
The headlight switch must be in the
position to see the display.
l Displays for 10 minutes after the ignition is
switched to ACC or off (LOCK) from ON.
l Displays for 10 minutes after the driver's
door is opened.
Odometer
The odometer records the total distance
the vehicle has been driven.
Trip meter
The trip meter can record the total
distance of two trips. One is recorded in
trip meter A, and the other is recorded in
trip meter B.
Odometer
Trip meter A
Press the selector
Odometer
Trip meter B
Press the selector
For instance, trip meter A can record the

distance from the point of origin, and trip
meter B can record the distance from
where the fuel tank is filled.
When trip meter A is selected, pressing
the selector again within one second will
change to trip meter B mode.
When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.
The trip meter records the total distance
the vehicle is driven until the meter is
again reset. Return it to 0.0 by holding
the selector depressed for 1 second or
more. Use this meter to measure trip
distances and to compute fuel
consumption.
5-39
Form No.8AS3-EA-09E
Driving Your Mazda

NOTE
l
Only the trip meters record tenths of

kilometers (miles).
The trip record will be erased when:
The power supply is interrupted (blown
fuse or the battery is disconnected).
The vehicle is driven over 999.9 km
(mile).
l
CAUTION
Do not run the engine with the
tachometer needle in the RED ZONE.
This may cause severe engine
damage.
qTachometer
The tachometer shows engine speed in
thousands of revolutions per minute
(rpm).
3.7-liter engine
qEngine Coolant Temperature Gauge

The engine coolant temperature gauge
shows the temperature of the engine
coolant.
Red zone
If the needle is near H, it indicates

overheating.
CAUTION
2.5-liter engine
Driving with an overheated engine

can cause serious engine damage
(page 7-11).
Red zone
5-40
Form No.8AS3-EA-09E
Driving Your Mazda

qFuel Gauge
qDashboard Illumination
The fuel gauge shows approximately how

much fuel is remaining in the tank when
the ignition is switched ON.
We recommend keeping the tank over 1/4
full. When the low fuel warning light
illuminates or when the needle is near E,
refuel as soon as possible.
Rotate the knob to adjust the brightness of

the instrument cluster and other
illuminations in the dashboard.
NOTE
l
Low fuel
warning light
The brightness of dashboard illuminations

can be adjusted when the headlight switch
or
position.
is in the
When the dashboard illumination
brightness cannot be adjusted any more, a
beep sound will be heard.
(Black-out meter)
The brightness of the instrument cluster
illumination can be adjusted when the
headlight switch is in any position.
Dim
NOTE
l
After refueling, it may require some time for

the needle to stabilize. In addition, the
needle may deviate while driving on a slope
or curve since the fuel moves in the tank.
The direction of the arrow (
) shows next
to the low fuel warning light indicates that
the fuel-filler lid is on the left side of the
vehicle.
Bright
Canceling the illumination dimmer

(Black-out meter and dashboard
illuminations)
When the headlight switch is in the
or
position, the illumination of the
instrument cluster and the information
display dims.
When driving on snowy or foggy roads,
or in other situations when the instrument
cluster or information display's visibility
is reduced due to glare from surrounding
brightness, cancel the illumination
dimmer and increase the illumination
intensity.
5-41
Form No.8AS3-EA-09E
Driving Your Mazda

To cancel the illumination dimmer, press
the dashboard illumination knob.
NOTE
l
This symbol ( ) indicates the knob to

adjust the brightness of the dashboard
illumination.
If the illumination dimmer is cancelled, the
instrument cluster and the information
display will not dim when the headlight
or
position
switch is turned to the
again.
qOutside Temperature Display

The outside temperature is displayed
when the ignition is switched ON.
NOTE
l
The displayed ambient temperature varies

from the actual ambient temperature
depending on the surrounding conditions as
well as the driving conditions.
To have the ambient temperature display
changed from Fahrenheit (F) to
Centigrade (C), contact an Authorized
Mazda Dealer.
5-42
Form No.8AS3-EA-09E
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds

Warning/Indicator Lights
Warning/Indicator lights will appear in any of the highlighted areas
Signal
Page
Brake System Warning Light
5-45
Charging System Warning Light
5-47
Engine Oil Pressure Warning Light
5-47
Check Engine Light
5-47
Powertrain Malfunction/Reduced Power Warning Light
5-48
ABS Warning Light
5-46
Air Bag/Front Seat Belt Pretensioner System Warning Light
5-48
5-43
Form No.8AS3-EA-09E
Driving Your Mazda

Signal
Page
Low Fuel Warning Light
5-49
Check Fuel Cap Warning Light
5-49
Seat Belt Warning Light/Beep
5-49
Door-Ajar Warning Light
5-51
Low Washer Fluid Level Warning Light
5-51
Automatic Transaxle Warning Light
5-51
Tire Pressure Monitoring System Warning Light
5-51
KEY Warning Light (Red)/KEY Indicator Light (Green)
5-53
Electronic Steering Lock Warning Light
5-55
Security Indicator Light
5-55
Headlight High-Beam Indicator Light
5-55
Shift Position Indicator Light
5-56
TCS/DSC Indicator Light
5-56
TCS OFF Indicator Light
5-56
DSC OFF Indicator Light
5-57
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)
5-57
5-44
Form No.8AS3-EA-09E
Driving Your Mazda

Signal
Page
BSM OFF Indicator Light
5-58
Lights-On Indicator Light
5-58
Turn Signal/Hazard Warning Indicator Lights
5-58
qBrake System Warning Light
2. After adding fluid, check the light

again.
If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
This warning has the following functions:

Parking brake warning
The light illuminates when the parking
brake is applied with the ignition switched
to START or ON. It turns off when the
parking brake is fully released.
Low brake fluid level warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
the right-of-way.
You may notice that the pedal is harder to
depress or that it may go closer to the
floor. In either case, it will take longer to
stop the vehicle.
1. With the engine stopped, open the
hood and check the brake fluid level
immediately, and then add fluid if
required (page 8-22).
Even if the light turns off have your brake

system inspected as soon as possible by
NOTE
Having to add brake fluid is sometimes an
indicator of leakage. Consult an Authorized
Mazda Dealer as soon as possible even if the
brake light is no longer illuminated.
WARNING
Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:
Driving with the brake system
warning light illuminated is
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.
5-45
Form No.8AS3-EA-09E
Driving Your Mazda

qABS Warning Light
The warning light stays on for a few

ON.
If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
Should this happen, consult an Authorized
NOTE
l
When the engine is jump-started to charge

the battery, uneven rpm occurs and the ABS
warning light may illuminate. If this occurs,
it is the result of the weak battery and does
not indicate an ABS malfunction.
Recharge the battery.
(With DSC vehicles)
The brake assist system does not operate
while the ABS warning light is illuminated.
5-46
Form No.8AS3-EA-09E
qElectronic Brake Force

Distribution System Warning
If the electronic brake force distribution

control unit determines that some
components are operating incorrectly, the
control unit may illuminate the brake
system warning light and the ABS
warning light on simultaneously. The
problem is likely to be the electronic
brake force distribution system.
WARNING
Do not drive with both the ABS warning
light and brake warning light
illuminated. Have the vehicle towed to
an Authorized Mazda Dealer to have
the brakes inspected as soon as
possible:
Driving when the brake system
warning light and ABS warning light
are illuminated simultaneously is
dangerous.
When both lights are illuminated, the
rear wheels could lock more quickly
in an emergency stop than under
normal circumstances.
Driving Your Mazda

qCharging System Warning Light
If the light illuminates while driving:

1. Drive to the side of the road and park
off the right-of-way on level ground.
2. Turn off the engine and wait 5 minutes
for the oil to drain back into the oil
pan.
This warning light illuminates when the

ignition is switched ON and turns off
when the engine is started.
If the warning light illuminates while
driving, it indicates a malfunction of the
alternator or of the charging system.
the right-of-way. Consult an Authorized
Mazda Dealer.
CAUTION
Do not continue driving when the
charging system warning light is
illuminated because the engine could
stop unexpectedly.
qEngine Oil Pressure Warning Light
This warning light illuminates when the

This warning light indicates low engine
oil pressure.
3. Inspect the engine oil level (page 8-20).

If it's low, add the appropriate amount
of engine oil while being careful not to
overfill.
4. Start the engine and check the warning
light.
If the light remains illuminated even after
you add oil, stop the engine immediately
and have your vehicle towed to an
CAUTION
Do not run the engine if the oil
pressure is low. It could result in
extensive engine damage.
qCheck Engine Light
This indicator light illuminates when the

If this light illuminates while driving, the
vehicle may have a problem. It is
important to note the driving conditions
when the light illuminated and consult an
5-47
Form No.8AS3-EA-09E
Driving Your Mazda

The check engine light may illuminate in
the following cases:
l The fuel tank level being very low or
approaching empty.
l The engine's electrical system has a
problem.
l The emission control system has a
problem.
If the powertrain malfunction/reduced

power warning light remains on, do not
drive at high speeds and consult an
possible.

Pretensioner System Warning Light
If the check engine light remains on or

flashes continuously, do not drive at high
speeds and consult an Authorized Mazda
Dealer as soon as possible.
qPowertrain Malfunction/Reduced
Power Warning Light (3.7-liter
engine)

ON.
If this light illuminates while driving, the
vehicle may have a problem. It is
important to note the driving conditions
when the light illuminated and consult an
The powertrain malfunction/reduced
power warning light may illuminate in the
following cases:
l The engine's electrical system has a
problem.
l The emission control system has a
problem.
5-48
Form No.8AS3-EA-09E
If the air bag/front seat belt pretensioner

system is working properly, the warning
light illuminates when the ignition is
switched ON or after the engine is
cranked. The warning light turns off after
a specified period of time.
A system malfunction is indicated if the
warning light constantly flashes,
constantly illuminates or does not
illuminate at all when the ignition is
switched ON. If any of these occur,
soon as possible. The system may not
work in an accident.
WARNING
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
Driving Your Mazda

qLow Fuel Warning Light
Low fuel
warning light
This warning light in the fuel gauge

signals that the fuel tank will soon be
empty.
Refuel as soon as possible.
qCheck Fuel Cap Warning Light

ON.
If the check fuel cap warning light
illuminates while driving, the fuel-filler
cap may not be installed properly. Stop
the engine and reinstall the fuel-filler cap.
Refer to the fuel-filler cap on page 3-47.
qSeat Belt Warning Light/Beep
The seat belt warning light illuminates

and a beep sound will be heard if the
driver's seat belt is not fastened when the
Conditions of operation
Condition
Result
The warning light
The driver's seat belt is not illuminates for about 1
fastened when the ignition is minute and a beep
switched ON.
sound will be heard
for about 6 seconds.
The warning light
fastened while the warning
turns off and the beep
light and the beep sound are
sound stops.
activated.
The warning light will
not illuminate and the
fastened before the ignition
beep sound will not be
is switched ON.
heard.
Belt minder
NOTE
The belt minder can be deactivated. Consult an
Authorized Mazda Dealer to deactivate or
restore the seat belt minder.
5-49
Form No.8AS3-EA-09E
Driving Your Mazda

Driver seated/Front passenger not
seated*
The belt minder is a supplemental
warning to the seat belt warning function.
when the ignition is switched ON, the
warning light/beep operates to give you
further reminders according to the chart
below.
*: The belt minder operates according to
the chart below even if the front
passenger is seated (Without Driver
and Front Passenger Occupant
Classification System).
Condition
Driver seated/Front passenger seated

The seat belt warning function reminds
the front passenger to fasten the seat belt
according to the chart below.
Condition
Seat belt
(Driver)
Seat belt
(Passenger)
Indicator
Beep
Vehicle speed
Between 0 20
20 km/h
km/h
(12 mph) or
(0 12 mph)
more
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
Seat belt
Indicator
Beep
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep

period has passed.
Placing heavy items on the front

passenger seat may cause the front
passenger seat belt warning function to
operate depending on the weight of the
item.
period has passed.
NOTE
l
5-50
Form No.8AS3-EA-09E
Vehicle speed
Between 0 20
20 km/h
km/h
(12 mph) or
(0 12 mph)
more
To allow the front passenger seat weight

sensor to function properly, do not place
and sit on an additional seat cushion on the
front passenger seat. The sensor may not
function properly because the additional
seat cushion could cause sensor
interference.
When a small child sits on the front
passenger seat, it is possible that neither
the warning light nor the warning beep
operate.
Driving Your Mazda

qDoor-Ajar Warning Light
This warning light illuminates when any

door or the trunk is not securely closed.
Close the door or the trunk securely
before driving the vehicle.
CAUTION
If the automatic transaxle warning
light illuminates, the transaxle has
an electrical problem. Continuing to
drive your Mazda in this condition
could cause damage to your
transaxle. Consult an Authorized
qTire Pressure Monitoring System

(TPMS) Warning Light
qLow Washer Fluid Level

Warning Light

ON.
This warning light indicates that little
washer fluid remains. Add fluid (page
8-27).
qAutomatic Transaxle Warning Light
Thereafter, the warning light illuminates

and a beep is heard when tire pressure is
too low in one or more tires, and flashes
when there is a system malfunction.
This warning light stays on for a few

ON.
The light illuminates when the transaxle
has a problem.
5-51
Form No.8AS3-EA-09E
Driving Your Mazda

WARNING
warning light illuminates or flashes, or
the tire pressure warning beep sound is
heard, decrease vehicle speed
immediately and avoid sudden
maneuvering and braking:
warning light illuminates or flashes,
or the tire pressure warning beep
sound is heard, it is dangerous to
drive the vehicle at high speeds, or
perform sudden maneuvering or
braking. Vehicle drivability could
worsen and result in an accident.
To determine if you have a slow leak
or a flat, pull over to a safe position
where you can check the visual
condition of the tire and determine if
you have enough air to proceed to a
place where air may be added and
the system monitored again, an
Authorized Mazda Dealer or a tire
repair station.
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is
dangerous, even if you know why it is
illuminated. Have the problem taken
care of as soon as possible before it
develops into a more serious
situation that could lead to tire
failure and a dangerous accident.
Warning light illuminates/Warning
beep sounds
When the warning light illuminates, and
the warning beep sound is heard (about 3
seconds), tire pressure is too low in one or
more tires.
5-52
Form No.8AS3-EA-09E
Adjust the tire pressure to the correct tire

pressure. Refer to the specification charts
(page 10-7).
CAUTION
damaged.
Driving Your Mazda

NOTE
l
Perform tire pressure adjustment when the

tires are cold. Tire pressure will vary
according to the tire temperature, therefore
let the vehicle stand for 1 hour or only drive
it 1.6 km (1 mile) or less before adjusting
the tire pressures. When pressure is
adjusted on hot tires to the cold inflation
pressure, the TPMS warning light/beep may
turn on after the tires cool and pressure
drops below specification.
Also, an illuminated TPMS warning light,
resulting from the tire air pressure dropping
due to cold ambient temperature, may turn
off if the ambient temperature rises. In this
case, it will also be necessary to adjust the
tire air pressures. If the TPMS warning
light illuminates due to a drop in tire air
pressure, make sure to check and adjust the
tire air pressures.
After adjusting the tire air pressures, it may
require some time for the TPMS warning
light to turn off. If the TPMS warning light
remains illuminated, drive the vehicle at a
speed of at least 25 km/h (16 mph) for 10
minutes, and then verify that it turns off.
Tires loose air naturally over time and the
TPMS cannot tell if the tires are getting too
soft over time or you have a flat. However,
when you find one low tire in a set of fourthat is an indication of trouble; you should
have someone drive the vehicle slowly
forward so you can inspect any low tire for
cuts and any metal objects sticking through
tread or sidewall. Put a few drops of water
in the valve stem to see if it bubbles
indicating a bad valve. Leaks need to be
addressed by more than simply refilling the
trouble tire as leaks are dangerous - take it
to an Authorized Mazda Dealer which has
all the equipment to fix tires, TPMS systems
and order the best replacement tire for your
vehicle.
If the warning light illuminates again even

after the tire pressures are adjusted, there
may be a tire puncture. Replace the
punctured tire with the temporary spare
tire (page 7-6).
NOTE
A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used.
Warning light flashes

qKEY Warning Light (Red)/KEY

Indicator Light (Green) (with
Advanced Key)
This indicator has two colors.

KEY Warning Light (Red)
When illuminated
l When the push button start is pressed
ON, it illuminates momentarily and
then turns off.
l If any malfunction occurs in the
advanced keyless system, it illuminates
continuously.
5-53
Form No.8AS3-EA-09E
Driving Your Mazda

WARNING
Do not drive the vehicle with the KEY
warning light illuminated:
If the KEY warning light remains
illuminated, do not continue to drive
using the advanced key system. Park
the vehicle in a safe place and use
the auxiliary key to continue driving
the vehicle. Have the vehicle
inspected at an Authorized Mazda
Dealer as soon as possible.
When flashing
l
Under the following conditions, the

KEY warning light (red) flashes to
inform the driver that the push button
start will not switch to ACC even if it
is pressed from off.
The advanced key battery is dead.
The advanced key is not within
operational range.
A key from another manufacturer
similar to the advanced key is in the
operational range.
l
l
Under the following conditions, the

KEY warning light (red) will flash
continuously when the push button
start has not been pressed off to notify
the driver that the advanced key has
been removed. The KEY warning light
(red) will stop flashing when the
advanced key is back inside the
vehicle:
The push button start has not been
pressed off, the driver's door is
open, and the advanced key is
removed from the vehicle.
The push button start has not been
pressed off and all the doors are
closed after removing the advanced
key from the vehicle.
l
NOTE
Because the advanced key utilizes low-intensity
radio waves, the Advanced Key Removed From
Vehicle Warning may activate if the advanced
key is carried together with a metal object or it
is placed in a poor signal reception area.
KEY Indicator Light (Green)
When illuminated
When the brake pedal is depressed with
an automatic transaxle or the clutch pedal
is depressed with a manual transaxle, the
system confirms that the correct advanced
key is inside the vehicle, the KEY
indicator light (green) illuminates, and the
push button start can be pressed to ACC
(page 3-10).
When flashing
When the push button start is pressed off
indicating that the remaining battery
power is low. Replace with a new battery
before the advanced key becomes
unusable.
5-54
Form No.8AS3-EA-09E
Driving Your Mazda

Refer to Advanced Key Maintenance on
page 3-6.
NOTE
The advanced key can be set so that the KEY
indicator light (green) does not flash even if
the battery power is low.
10-8.
qElectronic Steering Lock

Warning Light
The light stops flashing when the ignition

is switched ON with the correct ignition
key.
At this time, the immobilizer system is
disarmed and the light illuminates for
about 3 seconds and then turns off.
correct ignition key, and the security
Mazda Dealer.
qHeadlight High-Beam Indicator

Light
The warning light remains illuminated for

a few seconds after the push button start is
pressed ON.
It flashes if the steering wheel is not
unlocked after the push button start is
pressed (page 3-10).
qSecurity Indicator Light
This light indicates one of two things:

l The high-beam headlights are on.
l The turn signal lever is in the flash-topass position.
This indicator light starts flashing every 2

from ON to ACC and the immobilizer
system is armed.
Some models.
Form No.8AS3-EA-09E
5-55
Driving Your Mazda

qShift Position Indicator Light
(Automatic Transaxle)
This indicates the selected shift position.
If the light stays on, the TCS, DSC or the

brake assist system may have a
qTCS OFF Indicator Light
Gear position indicator
In manual mode, the M of the shift

position indicator illuminates and the
numeral for the selected gear displays in
the gear position indicator.

ON. If the TCS or DSC is operating, the
5-56
Some models.
Form No.8AS3-EA-09E

ON.
It also illuminates when the TCS OFF
switch is pressed and TCS is switched off.
Refer to TCS OFF Switch on page 5-24.
If the light remains illuminated and the
TCS is not switched off, take your vehicle
to an Authorized Mazda Dealer. The TCS
may have a malfunction.
Driving Your Mazda

NOTE
NOTE
(3.7-liter engine)
replaced, the TCS will be inoperable. When
this happens, the TCS OFF indicator light
flashes and the TCS indicator light illuminates.
To reactivate the TCS, perform the following

replaced, the DSC will be inoperable. In this
case, the DSC OFF indicator light flashes and
the TCS/DSC indicator light illuminates.
To make the DSC operable, do the following
1. Switch the ignition ON

3. Make sure the TCS OFF indicator light and
TCS indicator light turn off.
If the TCS indicator light and the TCS OFF
indicator light remain illuminated even after
switching the ignition ON, attempt the
procedure again. If this still does not work,
qDSC OFF Indicator Light

3. Make sure the DSC OFF indicator and the
TCS/DSC indicator goes off.
If the TCS/DSC indicator light and the DSC
OFF indicator light remain illuminated even
after switching the ignition ON, consult an
qCruise Main Indicator Light

(Amber)/Cruise Set Indicator
Light (Green)

ON.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-26).
The indicator light has two colors.
If the light stays on when the TCS/DSC is

not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
Cruise Set Indicator Light (Green)

The indicator light illuminates green when
a cruising speed has been set.
Cruise Main Indicator Light (Amber)

The indicator light illuminates amber
when the ON/OFF switch is pressed and
the cruise control system is activated.
Some models.
Form No.8AS3-EA-09E
5-57
Driving Your Mazda

qBSM OFF Indicator Light
This indicator light illuminates for a few

ON.
The BSM OFF indicator light illuminates
when the BSM system is turned off by
pressing the BSM OFF switch.
The indicator light flashes if the BSM
system has a malfunction. Consult an
NOTE
If the vehicle is driven on a road with less
traffic and few vehicles that the radar sensors
can detect, the system may pause (The BSM
OFF indicator light in the instrument panel
flashes). However, it does not indicate a
malfunction.
qLights-On Indicator Light

(Black-out meter)
This indicator light illuminates when the

exterior lights and dashboard illumination
are on.
5-58
Some models.
Form No.8AS3-EA-09E
qTurn Signal/Hazard Warning

Indicator Lights
When operating the turn signal lights, the

left or right turn signal indicator light
flashes to indicate which turn signal light
is operating (page 5-63).
When operating the hazard warning
lights, both turn signal indicator lights
flash (page 5-70).
NOTE
If an indicator light remains illuminated (does
not flash) or if it flashes abnormally, one of the
turn signal bulbs may be burned out.
Driving Your Mazda

Beep Sounds
Pretensioner System Warning Beep
If a malfunction is detected in the air bag/
front seat belt pretensioner systems and
the warning light, a warning beep sound
will be heard for about 5 seconds every
minute.
The air bag and seat belt pretensioner
system warning beep sound will continue
to be heard for approximately 35 minutes.
Have your vehicle inspected at an
possible.
WARNING
Do not drive the vehicle with the air
bag/front seat belt pretensioner system
warning beep sounding:
Driving the vehicle with the air bag/
warning beep sounding is dangerous.
In a collision, the air bags and the
will not deploy and this could result
in death or serious injury.
Contact an Authorized Mazda Dealer
to have the vehicle inspected as soon
as possible.
qSeat Belt Warning Beep

when the ignition is switched ON, a beep
sound will be heard for about 6 seconds.
If the driver or the front passenger's seat
belt is not fastened and the vehicle is
driven at a speed faster than about 20
km/h (12 mph), a beep sound will be
heard again for a specified period of time.
Refer to Seat Belt Warning Light/Beep on
page 5-49.
qIgnition Key Reminder

If the ignition is switched to off (LOCK)
or ACC with the key inserted, a
continuous beep sound will be heard
when the driver's door is opened.
qTire Inflation Pressure Warning

Beep
The warning beep sound will be heard for
about 3 seconds when there is any
abnormality in tire inflation pressures
(page 5-27).
qAdvanced Keyless Warning

Warning indicators for the advanced key,
such as the advanced key removed from
vehicle warning, use a beep sound and
warning/indicator lights in the instrument
cluster.
Refer to Warning and Beep Sounds on
page 3-20.
qElectronic Steering Lock

Warning Beep
The warning beep operates if the steering
wheel is not unlocked after the push
button start is pressed. (page 3-10)
Some models.
Form No.8AS3-EA-09E
5-59
Driving Your Mazda
Switches and Controls

Type B (With AUTO position)
Lighting Control
qHeadlights
Type A (Without AUTO position)
Turn the headlight switch to turn the

headlights, other exterior lights and
dashboard illumination on or off.
Switch Position
Turn the headlight switch to turn the

headlights, other exterior lights and
dashboard illumination on or off.
Switch Position
Headlights
Taillights
Parking lights
License lights
Dashboard illumination
Off
Off
On
Off
On
On
Headlights
Taillights
Parking lights
License lights
Dashboard
illumination
If the light switch is left on, the lights will

automatically switch off approximately 30
seconds after switching the ignition to ACC
or off (LOCK). The time setting can be
changed. Refer to Personalization Features
on page 10-8.
To prevent discharging the battery, do not
leave the lights on while the engine is off
unless safety requires them.
5-60
Form No.8AS3-EA-09E
Off
On
Off
On
On
Auto
NOTE
l
NOTE
l
Off
If the light switch is left on, the lights will

automatically switch off approximately 30
seconds after switching the ignition to ACC
or off (LOCK). The time setting can be
changed. Refer to Personalization Features
on page 10-8.
To prevent discharging the battery, do not
leave the lights on while the engine is off
unless safety requires them.
AUTO (Auto-light control)

When the headlight is in the AUTO
position and the ignition is switched ON,
the light sensor senses the surrounding
lightness or darkness and automatically
turns on or off the headlights, other
exterior lights and dashboard illumination
(see chart above).
Driving Your Mazda

CAUTION
NOTE
l
Do not shade the light sensor by

adhering a sticker or a label on
the windshield. Otherwise the light
sensor will not operate correctly.
Light sensor
The light sensor also works as a

rain sensor for the auto-wiper
control. Keep hands and scrapers
clear of the windshield when the
ignition is switched ON as fingers
could be pinched or the wipers and
wiper blades damaged when the
wipers activate automatically. If
you are going to clean the
windshield, be sure the wipers are
turned off completely - this is
particularly important when
clearing ice and snow - when it is
particularly tempting to leave the
engine running.
The light may not turn off immediately even

if the surrounding area becomes well-lit
because the light sensor determines that it
is nighttime if the surrounding area is
continuously dark for several minutes such
as inside long tunnels, traffic jams inside
tunnels, or in indoor parking lots.
In this case, the light turns off if the light
switch is turned to the OFF position.
The timing for turning on the headlights,
other exterior lights and dashboard
illumination can be delayed by adjusting
the sensitivity of the light sensor. Consult an
Authorized Mazda Dealer regarding sensor
adjustment.
The sensitivity of the AUTO lights may be
changed.Refer to Personalization Features
on page 10-8.
Xenon fusion headlight bulbs

The low-beam bulbs of the headlights
have xenon fusion bulbs that produce a
bright white beam over a wide area.
WARNING
Do not replace the xenon fusion bulbs
yourself:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement
is necessary.
NOTE
If the headlights flicker, or the brightness
weakens, the bulb-life may be depleted and a
replacement is necessary. Consult an
Some models.
Form No.8AS3-EA-09E
5-61
Driving Your Mazda

qHeadlight High-Low Beam
qHeadlight Leveling
Push the lever forward for high beam.

Pull back to original position for low
beam.
The number of passengers and weight of

cargo in the luggage compartment change
the angle of the headlights.
High beam
The headlight leveling switch adjusts this

angle.
Low beam
qFlashing the Headlights

To flash the headlights, pull the lever fully
toward you. The headlight switch does
not need to be on, and the lever will return
to the normal position when released.
Select the proper setting from the following chart.

Front seat
Driver Passenger
Rear
seat
Load
Switch
Position
0
0
1
2
3
: Yes
: No
qDaytime Running Lights (Canada)

In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition is
switched ON.
NOTE
The Daytime Running Lights turn off when the
parking brake is applied.
5-62
Some models.
Form No.8AS3-EA-09E
Driving Your Mazda

Turn and Lane-Change
Signals
NOTE
l
qTurn Signal
Move the signal lever down (for a left

turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash

after a turn, manually return the lever to
its original position.
If an indicator light stays on without

flashing or if it flashes abnormally, one of
the turn signal bulbs may be burned out.
A personalized function is available to
change the number of flashes.Refer to
Personalization Features on page 10-8.
A personalized function is available to
change the turn indicator sound
volume.Refer to Personalization Features
on page 10-8.
Right turn
Right lane
change
OFF
Left lane
change
Left turn
Green indicators on the dashboard show

which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change until the
indicator flashes and hold it there. It
will return to the off position when
released.
5-63
Form No.8AS3-EA-09E
Driving Your Mazda

Fog Lights
Use this switch to turn on the fog lights.
They help you to see as well as to be seen.
To turn the fog lights on, rotate the fog
light switch to the
position.
The headlight switch must be in the
position to turn on the fog lights.
Fog light switch
To turn them off, rotate the fog light

switch to the OFF position or turn the
headlight switch to the
or OFF
position.
NOTE
l
The fog lights will turn off when the

headlights are set at high beam.
(With auto-light control)
If the fog light switch is in the ON position
and the headlight switch is in the AUTO
position, the fog lights will be turned on
when the headlights, the exterior lights and
dashboard illumination are automatically
turned on.
5-64
Some models.
Form No.8AS3-EA-09E
Windshield Wipers and

Washer
The ignition must be switched ON.
WARNING
Use only windshield washer fluid or
plain water in the reservoir:
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the
windshield, affect your visibility, and
could result in an accident.
Only use windshield washer fluid
mixed with anti-freeze protection in
freezing weather conditions:
Using windshield washer fluid
without anti-freeze protection in
freezing weather conditions is
dangerous as it could freeze on the
windshield and block your vision
which could cause an accident.
In addition, make sure the
windshield is sufficiently warmed
using the defroster before spraying
the washer fluid.
Driving Your Mazda

NOTE
Variable-speed intermittent wipers
Because heavy ice and snow can jam the wiper

blades, the wiper motor is protected from
motor breakdown, overheating and possible
fire by a circuit breaker. This mechanism will
automatically stop operation of the blades, but
only for about 5 minutes.
If this happens, turn off the wiper switch and
park off the right-of-way, and remove the snow
and ice.
After 5 minutes, turn on the switch and the
blades should operate normally. If they do not
resume functioning, consult an Authorized
Mazda Dealer as soon as possible. Drive to
the side of the road and park off the right-ofway. Wait until the weather clears before trying
to drive with the wipers inoperative.
Set the lever to INT and choose the

interval timing by rotating the ring.
INT ring
Type B (With AUTO position)
qWindshield Wipers
Type A (With INT position)
Turn the wipers on by pulling the lever

down.
INT Intermittent
LO Low speed
HI High speed
Turn the wipers on by pulling the lever

down.
AUTO Auto control
LO Low speed
HI High speed
For a single wiping cycle, press the lever
up to MIST.
MIST Mist
For a single wiping cycle, press the lever

up to MIST.
MIST Mist
5-65
Form No.8AS3-EA-09E
Driving Your Mazda

AUTO (Auto-wiper control)
When the wiper lever is in the AUTO
position, the rain sensor senses the
amount of rainfall on the windshield and
turns the wiper on or off automatically
(offintermittentlow speedhigh
speed).
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the center position (normal), turn
the switch towards (+) for higher
sensitivity (faster response) or turn the
switch towards (_) for less sensitivity
(slower response).
Higher sensitivity
Switch
Center
position
Less sensitivity
5-66
Form No.8AS3-EA-09E
CAUTION
Do not shade the rain sensor by
adhering a sticker or a label on
the windshield. Otherwise the rain
sensor will not operate correctly.
Rain sensor
Driving Your Mazda

When the wiper lever is in the
AUTO position and the ignition is
switched ON, the wipers may
move automatically in the
following cases:
If the windshield above the rain
sensor is touched.
sensor is wiped with a cloth.
If the windshield is struck with
a hand or other object.
If the rain sensor is struck with
a hand or other object from
inside the vehicle.
Keep hands and scrapers clear of
the windshield when the ignition is
switched ON as fingers could be
pinched or the wipers and wiper
blades damaged when they
activate automatically.
If you are going to clean the
windshield, be sure the wipers are
turned off completely - this is
particularly important when
clearing ice and snow - when it is
particularly tempting to leave the
engine running.
NOTE
l
Switching the auto-wiper lever from the

OFF to the AUTO position while driving at
a vehicle speed of 4 km/h (2 mph) or higher
(or after driving the vehicle) activates the
windshield wipers once, after which they
operate according to the rainfall amount.
The auto-wiper control may not operate
when the rain sensor temperature is about
_10 C (14 F) or lower, or about 85 C
(185 F) or higher.
If the windshield is coated with water
repellent, the rain sensor may not be able to
sense the amount of rainfall correctly and
auto-wiper control may not operate
properly.
If dirt or foreign matter (e.g. ice or matter
containing salt water) adheres to the
windshield above the rain sensor or if the
windshield is iced, it could cause the wipers
to move automatically. However, if the
wipers cannot remove this ice, dirt or
foreign matter, the auto-wiper control will
stop operation. In this case, pull the wiper
lever to the low speed or high speed
position for manual operation, or remove
the ice, dirt or foreign matter by hand to
restore the auto-wiper operation.
5-67
Form No.8AS3-EA-09E
Driving Your Mazda

qWindshield Washer
Rear Window Defroster
Pull the lever toward you and hold it to

spray washer fluid.
The rear window defroster clears frost,

fog, and thin ice from the rear window.
The ignition must be switched ON.
OFF
Washer
NOTE
With the wiper lever in the OFF or INT (Type
A)/AUTO (Type B) position, the wipers will
operate continuously until the lever is
released.
If the washer does not work, inspect the

fluid level (page 8-27). If it's normal,
5-68
Form No.8AS3-EA-09E
Press the switch to turn on the rear

window defroster. The rear window
defroster operates for about 15 minutes
and turns off automatically.
The indicator light illuminates during
operation.
To turn off the rear window defroster
before the 15 minutes has elapsed, press
the switch again.
Fully Automatic Type Air-Conditioning
Indicator light
Driving Your Mazda

Manual Type Air-Conditioning
Indicator light
Horn
To sound the horn, press the
the steering wheel.
mark on
CAUTION
Do not use sharp instruments or
window cleaners with abrasives to
clean the inside of the rear window
surface. They may damage the
defroster grid inside the window.
NOTE
This defroster is not designed for melting snow.
If there is an accumulation of snow on the rear
window, remove it before using the defroster.
qMirror Defroster
To turn on the mirror defrosters, switch
the ignition ON and press the rear window
defroster switch (page 5-68).
NOTE
For vehicles equipped with mirror de-fogging
is indicated on each door
equipment,
mirror.
Some models.
Form No.8AS3-EA-09E
5-69
Driving Your Mazda

Hazard Warning Flasher
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
HomeLink Wireless
Control System
NOTE
HomeLink and HomeLink house are registered
trademarks of Johnson Controls.
The HomeLink system replaces up to 3

hand-held transmitters with a single builtin component in the auto-dimming mirror.
Pressing the HomeLink button on the
auto-dimming mirror activates garage
doors, gates and other devices
surrounding your home.
Indicator light
Depress the hazard warning flasher and all

the turn signals will flash.
HomeLink button
NOTE
l
The turn signals do not work when the

hazard warning lights are on.
Check local regulations about the use of
hazard warning lights while the vehicle is
being towed to verify that it is not in
violation of the law.
5-70
Some models.
Form No.8AS3-EA-09E
Driving Your Mazda

WARNING
Do not use the HomeLink system with
any garage door opener that lacks the
safety stop and reverse feature:
Using the HomeLink system with any
garage door opener that lacks the
safety stop and reverse feature as
required by federal safety standards
is dangerous. (This includes garage
doors manufactured before April 1,
1982.)
Using these garage door openers can
increase the risk of serious injury or
death. For further information,
contact HomeLink at 1-800-355-3515
or www.homelink.com or your
Always check the areas surrounding
garage doors and gates for people or
obstructions before programming or
during operation of the HomeLink
system:
Programming or operating the
HomeLink system without verifying
the safety of areas surrounding
garage doors and gates is dangerous
and could result in an unexpected
accident and serious injury if
someone were to be hit.
CAUTION
HomeLink has been tested and
complies with FCC and Industry
Canada rules. Changes or
modifications not expressly approved
by the party responsible for
compliance could void the user's
authority to operate the device.
NOTE
FCC ID: NZLOBIHL3
CANADA:4112A-OBIHL3
This device complies with FCC rules part 15.
Operation is subject to the following
conditions:
1- This device may not cause any harmful
interference and
2- This device must accept any interference
that may be received including interference
that may cause undesired operation.
NOTE
The programming will not be erased even if
the battery is disconnected.
qPre-programming the HomeLink

System
NOTE
It is recommended that a new battery be
placed in the hand-held transmitter of the
device being programmed to HomeLink for
quicker training and accurate transmission of
the radio-frequency signal.
l
Verify that there is a remote control

transmitter available for the device you
would like to program.
Disconnect the power to the device.
qProgramming the HomeLink System
CAUTION
When programming a garage door
opener or a gate, disconnect the
power to these devices before
performing programming, as
continuous operation of the devices
could damage the motor.
5-71
Form No.8AS3-EA-09E
Driving Your Mazda

The HomeLink system provides 3 buttons
which can be individually selected and
programmed using the transmitters for
current, on-market devices as follows:
1. Press and hold the two outer
HomeLink buttons (buttons one and
three) releasing only when the
indicator light begins to flash (after 20
seconds). Do not hold the buttons for
longer than 30 seconds and do not
repeat step 1 to program a second and/
or third hand-held transmitter to the
remaining two HomeLink buttons.
2. Position the end of your hand-held
transmitter 2.57.5 cm (13 inches)
away from the HomeLink button you
wish to program while keeping the
indicator light in view.
3. Simultaneously press and hold both the
chosen HomeLink and hand-held
transmitter buttons. Do not release the
buttons until step 4 has been
completed.
5. Press and hold the just-trained

HomeLink button and observe the
indicator light.
If the indicator light stays on constantly,
programming is complete and your
device should activate when the
HomeLink button is pressed and released.
NOTE
To program the remaining two HomeLink
buttons, begin with Programming step 2.
Do not repeat step 1.
If the indicator light blinks rapidly for

two seconds and then turns to a
constant light, continue with
Programming steps 68 to complete
the programming of a rolling code
equipped device (most commonly a
garage door opener).
NOTE
6. At the garage door opener receiver

(motor-head unit) in the garage, locate
the learn or smart button. This can
usually be found where the hanging
antenna wire is attached to the motorhead unit.
Some gate operators and garage door openers

may require you to replace this Programming
Step 3 with procedures noted in the Gate
Operator/Canadian Programming section.
7. Firmly press and release the learn or

smart button. (The name and color of
the button may vary by manufacturer.)
4. After the HomeLink indicator light

changes from a slow to a rapidly
blinking light, release both the
HomeLink and hand-held transmitter
buttons.
NOTE
If the HomeLink indicator light does not
change to a rapidly blinking light, contact
HomeLink at www.homelink.com or call 1800-355-3515 for assistance.
5-72
Form No.8AS3-EA-09E
NOTE
There are 30 seconds in which to initiate step
8.
8. Return to the vehicle and firmly press,

hold for two seconds and release the
programmed HomeLink button. Repeat
the press/hold/release sequence a
second time, and, depending on the
brand of the garage door opener (or
other rolling code equipped device),
repeat this sequence a third time to
complete the programming process.
Driving Your Mazda

HomeLink should now activate your
rolling code equipped device.
NOTE
To program the remaining two HomeLink
buttons, begin with Programming step 2.
Do not repeat step 1.
For questions or comments, please contact

HomeLink at www.homelink.com or 1800-355-3515.
qGate operator/Canadian
Programming
Canadian radio-frequency laws require
transmitter signals to time-out (or quit)
after several seconds of transmission
which may not be long enough for
HomeLink to pick up the signal during
programming. Similar to this Canadian
law, some U.S. gate operators are
designed to time-out in the same
manner.
If you live in Canada or you are having
difficulties programming a gate operator
by using the Programming procedures
(regardless of where you live), replace
Programming HomeLink step 3 with
the following:
NOTE
If programming a garage door opener or gate
operator, it is advised to unplug the device
during the cycling process to prevent
possible overheating.
Continue to press and hold the HomeLink

button while you press and release
every two seconds (cycle) your handheld transmitter until the frequency signal
has successfully been accepted by
HomeLink. (The indicator light will flash
slowly and then rapidly.)
Proceed with Programming step 4 to
complete.
qOperating the HomeLink System

Press the programmed HomeLink button
to operate a programmed device. The
code will continue being transmitted for a
maximum of 20 seconds.
qReprogramming the HomeLink

system
To program a device to HomeLink using a
HomeLink button previously trained,
follow these steps:
1. Press and hold the desired HomeLink
button. DO NOT release the button.
2. The indicator light will begin to flash
after 20 seconds. Without releasing the
HomeLink button, proceed with
Programming - step 2.
qErasing Programmed HomeLink

Buttons
To erase the existing programming from
all three operating channels, press and
hold the two outside buttons (
,
)
on the auto-dimming mirror until the
HomeLink indicator light begins to flash
after approximately 20 seconds.
Verify that the programming has been
erased when you resell the vehicle.
5-73
Form No.8AS3-EA-09E
5-74
Form No.8AS3-EA-09E
Interior Comfort
Use of various features for drive comfort, including air-conditioning and audio
system.
Climate Control System .......................... 6-2

Operating Tips .................................... 6-2
Vent Operation .................................... 6-3
Types of the Climate Control
System ................................................. 6-5
Manual Type ....................................... 6-6
Fully Automatic Type ....................... 6-11
Audio System .........................................
Antenna .............................................
Operating Tips for Audio System .....
Types of the Audio Set ......................
Audio Set (Type A) ...........................
Audio Set (Type B) ...........................
Audio Control Switch Operation ....
AUX Mode (Auxiliary input) ........
Safety Certification ...........................
6-16
6-16
6-16
6-25
6-27
6-57
6-81
6-84
6-87
Bluetooth Audio (Type A) ..................... 6-88

Bluetooth Audio (Type A) ............. 6-88
Bluetooth Hands-Free (Panel

Operation) ............................................ 6-131
Bluetooth Hands-Free .................. 6-131
Basic Bluetooth Hands-Free
Operation ........................................ 6-133
Convenient Use of the Hands-Free
System ............................................. 6-136
Hands-Free Setting .......................... 6-138
When Bluetooth Hands-Free Cannot be
Used ................................................ 6-140
Safety Certification ......................... 6-141
Mazda Bluetooth Hands-Free Customer
Service ............................................ 6-141
Interior Equipment .............................
Sunvisors .........................................
Interior Lights .................................
Information Display ........................
Cup Holder ......................................
Bottle Holder ...................................
Storage Compartments ....................
Accessory Sockets ..........................
6-142
6-142
6-143
6-145
6-149
6-150
6-151
6-154
Bluetooth Audio (Type B) ..................... 6-97

Bluetooth Audio (Type B) .............. 6-97
Bluetooth Hands-Free (Voice
Recognition) ......................................... 6-104
Bluetooth Hands-Free .................. 6-104
Operation ........................................ 6-109
System ............................................. 6-113
Hands-Free Setting .......................... 6-121
When Bluetooth Hands-Free Cannot be
Used ................................................ 6-129
Safety Certification ......................... 6-129
Mazda Bluetooth Hands-Free Customer
Service ............................................ 6-130
Some models.
Form No.8AS3-EA-09E
6-1
Interior Comfort
Climate Control System

Operating Tips
qOperating the Climate Control
System
Operate the climate control system with
the engine running.
NOTE
do not leave the fan control dial on for a long
period of time with the ignition in ON when the
engine is not running.
qClearing the Air Inlet

Clear all obstructions such as leaves,
snow and ice from the hood and the air
inlet in the cowl grille to improve the
system efficiency.
qFoggy Windows
The windows may fog up easily in humid
weather. Use the climate control system to
defog the windows.
To help defog the windows, operate the
air conditioner to dehumidify the air.
NOTE
The air conditioner may be used along with the
heater to dehumidify the air.
qParking in Direct Sunlight

If the vehicle has been parked in direct
sunlight during hot weather, open the
windows to let warm air escape, then run
the climate control system.
6-2
Form No.8AS3-EA-09E
qNot Using for a Long Period

Run the air conditioner about 10 minutes
at least once a month to keep internal
parts lubricated.
qCheck the Refrigerant before the

Weather Gets Hot
Have the air conditioner checked before
the weather gets hot. Lack of refrigerant
may make the air conditioner less
efficient. Consult an Authorized Mazda
Dealer for refrigerant inspection.
The air conditioner is filled with
HFC134a (R134a), a refrigerant that will
not damage the ozone layer.
If the air conditioner is low on refrigerant
or has a malfunction, consult an
qReplacement of the Cabin Air Filter

If your vehicle is equipped with an air
filter for the air conditioner, it is necessary
to change the filter periodically as
indicated in scheduled maintenance (page
8-3). Consult an Authorized Mazda
Dealer for replacement of the cabin air
filter.
Interior Comfort

Vent Operation
qAdjusting the Vents
Center Vents
To adjust the direction of airflow, move
the adjustment knob.
Directing airflow
Side Vents
To adjust the direction of airflow, open the
vents and rotate them left and right.
Dial
Open
Knob
Push
Close
NOTE
When using the air conditioner under humid
ambient temperature conditions, the system
may blow fog from the vents. This is not a sign
of trouble but a result of humid air being
suddenly cooled.
6-3
Form No.8AS3-EA-09E
Interior Comfort

qSelecting the Airflow Mode
Dashboard Vents
Defroster and Floor Vents
Dashboard and Floor Vents
Defroster Vents
Floor Vents
6-4
Form No.8AS3-EA-09E
Interior Comfort

Types of the Climate Control System
Manual type and fully automatic type climate control systems are explained separately.
Check your vehicle's climate control type and read the appropriate pages.
Manual Type ............................................................................................................ page 6-6
Fully Automatic Type ............................................................................................. page 6-11
6-5
Form No.8AS3-EA-09E
Interior Comfort

Manual Type
A/C switch
Air intake selector
Temperature control dial
Fan control dial
qControl Switches
MAX-A/C position
For quick cabin cooling, rotate the
temperature control dial counterclockwise
to the MAX-A/C position. The A/C
system automatically turns on and the air
intake mode switches to the recirculation
position automatically.
Cold
Mode selector dial
Hot
This dial controls temperature. Turn it

clockwise for hot and counterclockwise
for cold.
6-6
Form No.8AS3-EA-09E
NOTE
When the mode is set to
or
with the fan
control dial in a position other than 0 and the
temperature control dial in the maximum cold
position, the air intake selector switches to the
recirculated air mode and the A/C turns on
automatically.
If A/C is not desired, press the A/C switch to
turn it off.
Interior Comfort

Fan control dial
A/C switch
Slow
Fast
This dial allows variable fan speeds.

0Fan off
1Low speed
2Medium low speed
3Medium high speed
4High speed
Mode selector dial
Press the A/C switch to turn the air

conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
Press the switch once again to turn the air
conditioner off.
NOTE
The air conditioner may not function when the
outside temperature approaches 0 C (32 F).
Air intake selector
Turn the mode selector dial to select

airflow mode (page 6-4).
NOTE
l
The mode selector dial can be set at the

intermediate positions ( ) between each
mode. Set the dial to an intermediate
position if you want to slightly adjust the
airflow amount.
For example, when the mode selector dial is
position between the
and
at the
positions, airflow from the floor vent is less
position.
than that of the
This switch controls the source of air

entering the vehicle.
Press the
switch to alternate
between the outside air and recirculated
air modes.
It is recommended that under normal
conditions the switch be kept in the
outside air mode.
Some models.
Form No.8AS3-EA-09E
6-7
Interior Comfort

Outside air mode (indicator light
turned off)
Outside air is taken into the vehicle. Use
this mode for normal ventilation and
heating.
Recirculated air mode (indicator light
illuminated)
NOTE
l
Outside air is shut off. Air within the

vehicle is recirculated.
This mode can be used when driving on a
dusty road or in similar conditions. It also
helps to provide quicker cooling of the
interior.
WARNING
Do not use the recirculated air mode in
cold or rainy weather:
Using the recirculated air mode in
cold or rainy weather is dangerous as
it will cause the windows to fog up.
Your vision will be hampered, which
could lead to a serious accident.
qHeating
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
hot position.
3. Set the fan control dial to the desired
speed.
6-8
Some models.
Form No.8AS3-EA-09E
If the windshield fogs up easily, set the

position.
mode selector dial to the
If cooler air is desired at face level, set the
position and
mode selector dial at the
adjust the temperature control dial to
maintain maximum comfort.
The air to the floor is warmer than air to
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
In the
or
position, the air
conditioner is automatically turned on
(however, the indicator light does not
illuminate) and the outside air mode is
automatically selected to defrost the
windshield.
or
position, the outside air
In the
mode cannot be changed to the recirculated
air mode.
qCooling (With Air Conditioner)

position.
cold position.
speed.
4. Turn on the air conditioner by pressing
the A/C switch.
5. Adjust the fan control dial and
temperature control dial to maintain
maximum comfort.
Interior Comfort

CAUTION
When using the air conditioner while
driving up long hills or in heavy
traffic, closely monitor the
temperature gauge (page 5-40).
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner
off (page 7-11).
NOTE
l
When maximum cooling is desired, set the

temperature control dial to the extreme cold
position and set the air intake selector to
the recirculated air mode, then set the fan
control dial to position 4.
If warmer air is desired at floor level, set
position
the mode selector dial at the
and adjust the temperature control dial to
maintain maximum comfort.
The air to the floor is warmer than air to
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
qWindshield Defrosting and Defogging

position.
desired position.
speed.
WARNING
Do not defog the windshield using the
position with the temperature
control set to the cold position:
Using the
position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious
accident. Set the temperature control
to the hot or warm position when
using the
position.
qVentilation
position.
2. Set the air intake selector to the outside
air mode.
desired position.
speed.
6-9
Form No.8AS3-EA-09E
Interior Comfort

NOTE
NOTE
l
For quick cabin cooling, rotate the

temperature control dial counterclockwise
to the MAX-A/C position. The A/C system
automatically turns on and the air intake
mode switches to the recirculation position
automatically.
For maximum defrosting, set the
temperature control dial to the extreme hot
position and the fan control dial to position
4.
If warm air is desired at the floor, set the
position.
mode selector dial to the
In the
, or
position, the air
conditioner is automatically turned on
(however, the indicator light does not
illuminate) and the outside air mode is
automatically selected to defrost the
windshield.
or
In the
air mode.
qDehumidifying (With Air

Conditioner)
Operate the air conditioner in cool or cold
weather to help defog the windshield and
side windows.
desired position.
2. Set the air intake selector to the outside
air mode.
desired position.
speed.
5. Turn on the air conditioner by pressing
the A/C switch.
6-10
Some models.
Form No.8AS3-EA-09E
One of the functions of the air conditioner is

dehumidifying the air and, to use this function,
the temperature does not have to be set to cold.
Therefore, set the temperature control dial to
the desired position (hot or cold) and turn on
the air conditioner when you want to
dehumidify the cabin air.
Interior Comfort

Fully Automatic Type
Climate control information is displayed on the information display.
Information display
AUTO
Air intake display
A/C
Fan speed display
Temperature setting display (passenger)
Mode selector display

Temperature setting display (driver)
Mode selector switch
Windshield defroster switch
Rear window defroster switch

Air intake selector
AUTO switch
Driver temperature control dial
OFF switch
Fan control dial
A/C switch
DUAL switch
Passenger temperature control dial
6-11
Form No.8AS3-EA-09E
Interior Comfort

qControl Switches
AUTO switch
Pressing the OFF switch shuts off the

climate control system.
Cold
By pressing the AUTO switch the

following functions will be automatically
controlled in accordance with the selected
set temperature:
l Airflow temperature
l Amount of airflow
l Selection of airflow mode
l Outside/Recirculated air selection
l Air conditioner operation
NOTE
AUTO switch indicator light
l When on, it indicates AUTO operation, and
the system will function automatically.
l If any of the following dials or switches are
operated while in AUTO control, the AUTO
switch indicator turns off.
Fan control dial
The functions for dials and switches other
than those operated in the above continue
to operate in AUTO control.
l
l
l
Hot
This dial controls temperature. Turn it

clockwise for hot and counterclockwise
for cold.
l When the DUAL switch is off:
Turn the driver temperature control dial
to control the temperature.
l When the DUAL switch is on:
Turn the driver or front passenger
temperature control dial to control the
temperature.
NOTE
The system changes to the individual operation
mode (DUAL switch indicator light
illuminated) by turning the front passenger
temperature control dial even when the DUAL
switch is off, which allows individual control
of the set temperature for the driver and front
passenger.
Fan control dial
OFF switch
Slow
Fast
The fan has seven speeds. The selected

speed will be displayed.
6-12
Form No.8AS3-EA-09E
Interior Comfort

NOTE
l
The air conditioning operates when the A/C

switch is pressed even if the fan is off.
The air conditioner may not function when
the outside temperature approaches 0 C
(32 F). (Indicator light remains on even
when system is off.)
Air intake selector

The desired airflow mode can be selected
(page 6-4).
NOTE
l
With the airflow mode set to the

position and the temperature control dial
set at a medium temperature, heated air is
directed to the feet and a comparably lower
air temperature will flow through the
central, left and right vents.
To set the air vent to
, press the
windshield defroster switch.
In the
position, the air conditioner is
automatically turned on and the outside air
mode is automatically selected to defrost
position, the
the windshield. In the
outside air mode cannot be changed to the
recirculated air mode.
A/C switch
Outside or recirculated air positions can

be selected. Press the switch to select
outside/recirculated air positions.
Recirculated air position (
)
Use this position when going through
tunnels, driving in congested traffic (high
engine exhaust areas) or when quick
cooling is desired.
Outside air position (
)
Use this position for normal conditions
and defogging.
WARNING
Pressing the A/C switch while the AUTO

switch is turned on will turn off the air
conditioning (cooling/dehumidifying
functions). The air conditioning can be
turned on and off by pressing the A/C
switch while the fan control dial is on.
Do not use the

position in cold or
rainy weather:
Using the
position in cold or
rainy weather is dangerous as it will
cause the windows to fog up. Your
vision will be hampered, which could
lead to a serious accident.
6-13
Form No.8AS3-EA-09E
Interior Comfort

DUAL switch
Press the switch to defrost the windshield

and front door windows.
NOTE
In the
position, the air conditioner is
automatically turned on and the outside air
mode is automatically selected to defrost the
windshield. In the
air mode.
Use the DUAL switch to change the mode

between the individual operation (driver
and passenger) and interconnection
modes.
Individual operation mode (indicator
light illuminated)
The set temperature can be controlled
individually for the driver and front
passenger.
qOperation of Automatic Air

Conditioning
1. Press the AUTO switch. Selection of
the airflow mode, air intake selector
and amount of airflow will be
automatically controlled.
Interconnection mode (indicator light

turned off)
The set temperature for the driver and
front passenger is controlled
simultaneously.
NOTE
The system changes to the interconnection
mode automatically if the windshield defroster
switch is pressed. The system will not change
to the individual operation mode by pressing
the DUAL switch or turning the front
passenger temperature control dial.
2. Use the temperature control dial to

select a desired temperature.
Press the DUAL switch or turn the
front passenger temperature control
dial to control the set temperature
individually for the driver and front
passenger.
To turn off the system, press the OFF

switch.
6-14
Form No.8AS3-EA-09E
Interior Comfort

NOTE
l
Setting the temperature to the maximum

high or low will not provide the desired
temperature at a faster rate.
When selecting heat, the system will restrict
airflow until it has warmed to prevent cold
air from blowing out of the vents.
qWindshield Defrosting and Defogging
NOTE
Use the temperature control dial to increase
the air flow temperature and defog the
windshield more quickly.
qSunlight/Temperature Sensor
The fully automatic air conditioner
function measures inside and outside
temperatures, and sunlight. It then sets
temperatures inside the passenger
compartment accordingly.
CAUTION
Do not obstruct either sensor,
otherwise the automatic air
conditioner will not operate properly.
Press the windshield defroster switch.

In this position, the outside air position is
automatically selected, and the air
conditioner automatically turns on. The
air conditioner will directly dehumidify
the air to the front windshield and side
windows (page 6-4). Airflow amount will
be increased.
Sunlight sensor
WARNING
Set the temperature control to the hot
or warm position when defogging (
position):
Using the
position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious
accident.
Interior temperature sensor
6-15
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Antenna
qAM/FM Radio Antenna
The rear window antenna receives both
AM and FM signals.
CAUTION
When washing the inside rear
window, use a soft cloth dampened
in lukewarm water, gently wiping the
antenna lines.
Use of glass cleaning products could
damage the antenna.
qSatellite Radio Antenna

The satellite radio antenna receives
SIRIUS signals.
Operating Tips for Audio

System
WARNING
Do not adjust the audio control
switches while driving the vehicle:
Adjusting the audio while driving the
vehicle is dangerous as it could
distract your attention from the
vehicle operation which could lead to
a serious accident. Always adjust the
audio while the vehicle is stopped.
Even if the audio control switches are
equipped on the steering wheel, learn
to use the switches without looking
down at them so that you can keep
your maximum attention on the road
while driving the vehicle.
Satellite radio antenna
CAUTION
For the purposes of safe driving,
adjust the audio volume to a level
that allows you to hear sounds
outside of the vehicle including car
horns and particularly emergency
vehicle sirens.
NOTE
l
6-16
Some models.
Form No.8AS3-EA-09E
To prevent the battery from being

discharged, do not leave the audio system
on for a long period of time when the
engine is not running.
If a cellular phone or CB radio is used in
or near the vehicle, it could cause noise to
occur from the audio system, however, this
does not indicate that the system has been
damaged.
Interior Comfort
Audio System
qRadio Reception
AM characteristics
AM signals bend around such things as
buildings or mountains and bounce off the
ionosphere. Therefore, they can reach
longer distances than FM signals. Because
of this, two stations may sometimes be
picked up on the same frequency at the
same time.
Signals from an FM transmitter are similar

to beams of light because they do not
bend around corners, but they do reflect.
Unlike AM signals, FM signals cannot
travel beyond the horizon. Therefore, FM
stations cannot be received at the great
distances possible with AM reception.
Ionosphere
FM wave
AM wave
Ionosphere
FM wave
100200 km (60120 miles)
Station 1
Station 2
FM characteristics
An FM broadcast range is usually about
4050 km (2530 miles) from the
source. Because of extra coding needed to
break the sound into two channels, stereo
FM has even less range than monaural
(non-stereo) FM.
FM Station
4050km
(2530 miles)
Atmospheric conditions can also affect

FM reception. High humidity will cause
poor reception. However, cloudy days
may provide better reception than clear
days.
Multipath noise
Since FM signals can be reflected by
obstructions, it is possible to receive both
the direct signal and the reflected signal at
the same time. This causes a slight delay
in reception and may be heard as a broken
sound or a distortion. This problem may
also be encountered when in close
proximity to the transmitter.
Reflected wave
Direct
6-17
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Flutter/Skip noise
Strong signal noise
Signals from an FM transmitter move in

straight lines and become weak in valleys
between tall buildings, mountains, and
other obstacles. When a vehicle passes
through such an area, the reception
conditions may change suddenly, resulting
in annoying noise.
This occurs very close to a transmitter

tower. The broadcast signals are
extremely strong, so the result is noise and
sound breakup at the radio receiver.
Station drift noise

Weak signal noise
In suburban areas, broadcast signals
become weak because of distance from
the transmitter. Reception in such fringe
areas is characterized by sound breakup.
6-18
Form No.8AS3-EA-09E
When a vehicle reaches the area of two

strong stations broadcasting at similar
frequencies, the original station may be
temporarily lost and the second station
picked up. At this time there will be some
noise from this disturbance.
Station 1
88.1 MHz
Station 2
88.3 MHz
Interior Comfort
Audio System
qOperating Tips for CD Player/InDash CD Changer
Condensation phenomenon
Immediately after turning on the heater
when the vehicle is cold, the CD or
optical components (prism and lens) in the
CD player/In-dash CD changer may
become clouded with condensation. At
this time, the CD will eject immediately
when placed in the unit. A clouded CD
can be corrected simply by wiping it with
a soft cloth. Clouded optical components
will clear naturally in about an hour. Wait
for normal operation to return before
attempting to use the unit.
The CD revolves at high speed within

the unit. Defective (cracked or badly
bent) CDs should never be used.
Do not use non-conventional discs

such as heart-shaped, octagonal discs,
etc. The disc may not eject resulting in
a malfunction.
If the memory portion of the CD is

transparent or translucent, do not use
the disc.
Handling the CD player/In-dash CD

changer
The following precautions should be
observed.
l Do not spill any liquid on the audio
system.
Do not insert any objects, other than

CDs, into the slot.
Transparent
6-19
Form No.8AS3-EA-09E
Interior Comfort
Audio System
l
A new CD may have rough edges on

its inner and outer perimeters. If a disc
with rough edges is used, proper
setting will not be possible and the CD
player/In-dash CD changer will not
play the CD. In addition, the disc may
not eject resulting in a malfunction.
Remove the rough edges in advance by
using a ball-point pen or pencil as
shown below. To remove the rough
edges, rub the side of the pen or pencil
against the inner and outer perimeter of
the CD.
Use discs that have been legitimately

produced. If illegally-copied discs such
as pirated discs are used, the system
may not operate properly.
Be sure never to touch the signal

surface when handling the CDs. Pick
up a CD by grasping the outer edge or
the edge of the hole and the outer edge.
Do not stick paper or tape on the CD.

Avoid scratching the reverse side (the
side without a label). The disc may not
eject resulting in a malfunction.
Dust, finger smudges, and dirt can
decrease the amount of light reflected
from the signal surface, thus affecting
sound quality. If the CD should
become soiled, gently wipe it with a
soft cloth from the center of the CD to
the edge.
Do not use record sprays, antistatic
agents, or household spray cleaners.
Volatile chemicals such as benzine and
thinner can also damage the surface of
the CD and must not be used. Anything
that can damage, warp, or fog plastic
should never be used to clean CDs.
When driving over uneven surfaces,

the sound may jump.
The CD player/In-dash CD changer has

been designed to play CDs bearing the
identification logo as shown. No other
discs can be played.
l
6-20
Form No.8AS3-EA-09E
Interior Comfort
Audio System
l
Insert discs one by one. If two discs are

inserted at the same time, the system
may not operate properly.
The CD player/In-dash CD changer
ejects the CD if the CD is inserted
upside down. Also dirty and/or
defective CDs may be ejected.
Do not insert cleaning discs in the CD
player/In-dash CD changer.
Do not insert any disc with a peel-off
seal affixed to it.
This unit may not be able to play
certain CD-R/CD-RWs made using a
computer or music CD recorder due to
disc characteristics, scratches,
smudges, dirt, etc., or due to dust or
condensation on the lens inside the
unit.
Storing CDs in the vehicle exposed to
direct sunlight or high temperature may
damage the CD-R/CD-RWs, and make
them unplayable.
CD-R/CD-RW exceeding 700 MB
cannot be played.
This unit may not be able to play
certain discs made using a computer
due to the application (writing
software) setting used. (For details,
consult the store where the application
was purchased.)
It is possible that certain text data, such
as titles, recorded on a CD-R/CD-RW
may not be displayed when musical
data (CD-DA) is playing.
The period from when a CD-RW is
inserted to when it begins playing is
longer than a normal CD or CD-R.
Completely read the instruction manual
and cautions for CD-R/CD-RWs.
Do not use discs with cellophane tape

adhering, partially peeled off labels, or
adhesive material exuding from the
edges of the CD label. Also, do not use
discs with a commercially-available
CD-R label affixed. The disc may not
eject resulting in a malfunction.
qOperating Tips for MP3

NOTE
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use this
product in any commercial (i.e. revenuegenerating) real time broadcasting (terrestrial,
satellite, cable and/or any other media),
broadcasting/streaming via the Internet,
intranets and/or other networks or in other
electronic content distribution systems, such as
pay-audio or audio-on-demand applications.
An independent license for such use is
required. For details, please visit
http://www.mp3licensing.com.
l
This audio system handles MP3 files

that have been recorded on CD-R/CDRW/CD-ROMs. Discs that have been
recorded using the following formats
can be played:
ISO 9660 level 1
ISO 9660 level 2
Joliet extended format
Romeo extended format
This unit handles MP3 files
conforming to the MP3 format
containing both header frames and data
frames.
This unit can play multi-session
recorded discs that have up to 40
sessions.
This unit can play MP3s with sampling
frequencies of 16/22.05/24/32/44.1/48
kHz.
l
l
l
l
6-21
Form No.8AS3-EA-09E
Interior Comfort
Audio System
l
This unit can play MP3 files that have

been recorded in bit rates of 8 kbps to
320 kbps. Nonetheless, to insure
enjoyment of music with consistent
sound quality, it is recommended to use
discs that have been recorded at a bit
rate of 128 kbps or more.
If a disc has both music data (CD-DA)
and MP3 files, playback of the two file
types differs depending on how the
disc was recorded.
Packet written discs cannot be played
on this unit.
This unit does not play CDs recorded
using MP3i (MP3 interactive), MP3
PRO and RIFF MP3 formats.
Folder
No.
: Folder
: Track (File)
01
02
04
3
03
2
05
4
06
5
1
About folders and files

l
The order of hierarchy for MP3 files

and folders during playback or other
functions is from shallow to deep. The
arrangement and playing order of a
recorded disc containing MP3 files is
as follows:
File number
A numerical file number is assigned
to each file in a folder in the order of
hierarchy from shallow to deep.
Folder number
A numerical folder number is
assigned to each folder in the order
of hierarchy from shallow to deep.
Level1 Level2 Level3 Level4

Playback may not occur in the above
hierarchy depending on the audio unit.
l
NOTE
Folders and tracks (files) within the same

hierarchy play in the order they were written to
the disc depending on the write software.
l
6-22
Form No.8AS3-EA-09E
The folder order is automatically

assigned and this order cannot be
optionally set.
Any folder without an MP3 file will be
ignored. (It will be skipped and the
folder number will not be displayed.)
MP3 files not conforming to the MP3
format containing both header frames
and data frames will be skipped and
not played.
This unit will play MP3 files that have
up to eight levels. However, the more
levels a disc has, the longer it will take
to initially start playing. It is
recommended to record discs with two
levels or less.
A single disc with up to 512 files can
be played and a single folder with up to
255 files can be played.
When naming an MP3 file, be sure to
add an MP3 file extension (.mp3) after
the file name.
Interior Comfort
Audio System
l
The maximum number of characters

that can be used for file names is as
follows. However, this unit will only
display up to 32 characters, including
the file extension (.mp3).
ISO9660 level 1
ISO9660 level 2
Joliet extended
format
Romeo extended
format
Maximum number of
characters in a file name
(including a separator .
and the three letters of the
file extension)
12*
31*
64
128
* English one-byte characters (capitalized only) and

underbar _ are available.
CAUTION
This unit can only play MP3 files that
have an MP3 file extension (.mp3)
attached. Do not attach an MP3 file
extension to any other type file as it
could cause noise to be emitted or a
malfunction in the unit.
About ID3 Tag display
l
This unit can only display ID3 Tag

album, track and artist names that have
been input using Ver.1.0/1.1/2.2/2.3
formats. Any other data that may have
been input cannot be displayed.
This unit can only display English
(including numerals) one-byte
characters. Use only English (including
numerals) one-byte characters when
inputting ID3 tags. Two-byte characters
and some special symbols cannot be
displayed.
Specialized glossary
MP3
Abbreviation for MPEG Audio Layer 3.
A technical standard for audio
compression as decided by an ISO
(International Organization for
Standardization) MPEG working group.
Use of MP3 allows for audio data to be
compressed to approximately a tenth of
the source data size.
ISO 9660
An international standard for logical
formatting of CD-ROM files and folders.
It is divided into three separate levels
based on differences in file naming
procedures, data configuration and other
characteristics.
Multi-session
A session is the complete amount of data
recorded from the beginning to the end of
a single period of CD-ROM, CD-R/CDRW data recording. Multi-session refers to
the existence of data from two or more
sessions on a single disc.
Sampling
Refers to the process of encoding analog
audio data at regular intervals and
converting it to digital data. The sampling
rate refers to the number of times a
sample is taken in one second and is
expressed in Hz units. Increasing the
sampling rate improves the sound quality
but also increases the data size.
6-23
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Bit rate
Playable WMA file specification
Refers to the volume of data per second,

expressed in bps (bits per second).
Generally, the larger the number of the
transfer bit rate when compressing an
MP3 file, the more information regarding
musical reproduction it carries, and
therefore the better the sound quality.
CD-R and CD-RW including WMA files

can be played with this unit. Discs which
conform to the following formats can be
played.
Playable WMA files are as follows:
Packet writing
Specification
A general term for the method, similar to

that used for floppy discs or hard drives,
of recording the required file in a single
increment on a CD-R and similar.
Sampling
frequency
ID3 Tag
ID3 tag is a method for storing
information related to the music in an
MP3 file. Information such as track, artist
and album name can be stored. This
content can be freely edited using ID3
editing function software.
VBR
Abbreviation for Variable Bit Rate. While
CBR (Constant Bit Rate) is generally
used, VBR varies the bit rate for audio
compression according to compression
conditions and this allows for
compression with preference given to
sound quality.
qOperating Tips for WMA

WMA is short for Windows Media Audio
and is the audio compression format used
by Microsoft.
Audio data can be created and stored at a
higher compression ratio than MP3.
* Microsoft and Windows Media are
registered trademarks of Microsoft
Corporation U.S. in the United States
and other countries.
6-24
Form No.8AS3-EA-09E
Item
Bit rate
VBR (Variable Bit Rate)

Channel mode
WMA tag
Content
Windows Media
Audio Version 7.0,
8.0, 9.0
32kHz. . . . . . . 32, 40,
48 kbps
44.1kHz . . . . . 32, 48,
64, 80, 96, 128, 160,
192, 256, 320 kbps
48kHz. . . . . . . 64, 96,
128, 160, 192 kbps
Supported
Stereo/Monaural
Title, artist name,
album name
CAUTION
This unit plays files with the (.wma)
file extension as a WMA file. Do not
use the WMA file extension for files
other than WMA files. It may cause
noise or a malfunction.
l
In a WMA file, the track name, artist

name and album name are recorded
with data called WMA-Tag, and the
information can be displayed.
WMA files which do not comply with
the specific standard may not be played
correctly or its file and folder name
may not be displayed correctly.
The file extension may not be provided
depending on the computer operating
system, version, software, or settings.
In this case, add the file extension
.wma to the end of the file name, and
then write the disc.
Interior Comfort
Audio System
Types of the Audio Set
Audio Set (Type A) ................................................................................................ page 6-27
Audio Set (Type B) ................................................................................................ page 6-57
6-25
Form No.8AS3-EA-09E
MEMO
6-26
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Audio Set (Type A)
Audio information is displayed on the information display.
CD Player
In-Dash CD Changer
Power/Volume/Sound Controls .............................................................................. page 6-28

Operating the Radio ............................................................................................... page 6-32
Operating the Satellite Radio ................................................................................. page 6-34
Operating the Compact Disc (CD) Player .............................................................. page 6-46
Operating the In-Dash CD Changer ....................................................................... page 6-50
Operating the Auxiliary jack .................................................................................. page 6-54
Error Indications ..................................................................................................... page 6-55
6-27
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qPower/Volume/Sound Controls
Power/Volume dial
Power ON/OFF
Switch the ignition to ACC or ON.
Press the power/volume dial to turn the
audio system on.
Press the power/volume dial again to turn
the audio system off.
NOTE
do not leave the audio system on for a long
period of time when the engine is not running.
Volume adjustment
To adjust the volume, turn the power/
volume dial.
Turn the power/volume dial to the right to
increase volume, to the left to decrease it.
6-28
Form No.8AS3-EA-09E
Audio control dial
Audio sound adjustment

1. Press the audio control dial to select the
function. The selected function will be
indicated.
Interior Comfort
Audio System
Standard audio-equipped model

*1
*1 Depending on the mode selected, the

indication changes.
*2 Depending on the model, this
function, may not be available.
2. Turn the audio control dial to adjust the
selected functions as follows:
Indication
Turn Left Turn Right

Select mode
*1
*1
*1 *2
*2
Decrease
Increase
bass
bass
Decrease
Increase
treble
treble
Shift the
Shift the
sound to the sound to the
front
rear
Shift the
Shift the
left
right
OFF
ON
OFF
ON
OFF
ON
Bose Sound System-equipped model

*1
*1
Select mode
*1
*1
*1*2
*2
6-29
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Indication
Turn Left Turn Right
Select the desired ALC mode.

Mode
Volume change
OFF
ON
No change
OFF
ON
Minimum
Decrease
Increase
bass
bass
Decrease
Increase
treble
treble
Shift the
Shift the
front
rear
Shift the
Shift the
left
right
OFF
ON
OFF
ON
OFF
ON
Select mode
NOTE
About 5 seconds after selecting any mode, the
volume function will be automatically selected.
To reset bass, treble, fade, and balance, press
the audio control dial for 2 seconds. The unit
will beep and CLEAR will be displayed.
Automatic Level Control (ALC)

The automatic level control is a feature
that automatically adjusts audio volume
and sound quality according to the vehicle
speed.
The volume increases in accordance with
the increase in vehicle speed, and
decreases as vehicle speed decreases.
6-30
Form No.8AS3-EA-09E
Medium
Maximum
Turn the audio control dial to select ALC

OFF or ALC LEVEL17 modes. The
selected mode will be indicated.
Interior Comfort
Audio System
*
AudioPilot 2 (Bose Sound Systemequipped model)

AudioPilot 2 automatically adjusts audio
volume and sound quality in accordance
with the level of noise entering the vehicle
interior while driving. When AudioPilot
2 is turned on, the system automatically
calculates the conditions for optimum
hearing of sound which may be difficult
to hear depending on exterior noise.
* AudioPilot 2 is a registered trademark
of Bose Corporation.
*
Centerpoint (Bose Sound Systemequipped model)

Centerpoint offers you the experience of
5.1-channel surround sound in your
vehicle even with your conventional 2channel stereo CDs.
Centerpoint can be set on or off.
NOTE
l
Centerpoint operates optimally with a 2channel stereo CD. MP3 audio files can be
played, however, MP3 audio files encoded
with high compression may result in poor
sound quality.
Centerpoint is available for 2-channel
stereo audio except for AM radio/FM radio/
SIRIUS digital satellite radio/AUX/BT
audio.
Welcome mode
The welcome mode provides the
following presentation:
l Sound is heard when the ignition is
turned on.
l Illumination turns on when a door is
opened after unlocking the doors.
Only the sound effect can be switched on
or off.
BT SETUP mode
Music and other audio such as voice data
recorded on portable audio devices and
mobile phones available on the market
which are equipped with the Bluetooth
transmission function can be listened to
via wireless transmission over the
vehicle's speakers. Using the BT SETUP
mode, these devices can be programmed
to the Bluetooth unit or changed. For
details, refer to Bluetooth audio (page
6-88).
* Centerpoint is a registered trademark

BEEP setting
The beep-sound when operating the audio
system can be set on or off.
ILLM EFT setting (Illumination setting
during operation)
The audio system illumination during
operation can be set on or off.
Some models.
Form No.8AS3-EA-09E
6-31
Interior Comfort
Audio System
qOperating the Radio
Channel preset buttons

Band selector buttons
Seek
tuning
buttons
Auto memory
button
Manual tuning
dial
Scan button
Radio ON
Press a band selector button (
turn the radio on.
) to
Band selection
Choose AM by pressing the AM button
( ) and FM by pressing the FM button
( ).
The selected mode will be indicated. If
FM stereo is being received, ST will be
displayed.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise, and the
ST indicator will go out.
6-32
Form No.8AS3-EA-09E
Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
Seek tuning
Pressing the seek tuning button ( , )
will cause the tuner to seek a higher or
lower frequency automatically.
Interior Comfort
Audio System
NOTE
If you continue to press and hold the button,
the frequency will continue changing without
stopping.
Scan tuning
Press the scan button (
) to
automatically sample strong stations.
Scanning stops at each station for about 5
seconds. To hold a station, press the scan
button (
) again during this interval.
Preset channel tuning
The 6 preset channels can be used to store
6 AM and 12 FM stations.
1. To set a channel first select AM, FM1,
or FM2. Tune to the desired station.
2. Depress a channel preset button for
about 2 seconds until a beep sound is
heard. The preset channel number and
station frequency will be displayed.
The station is now held in the memory.
Press and hold the auto memory button

(
) for about 2 seconds until a beep
sound is heard; the system will
automatically scan and temporarily store
up to 6 stations with the strongest
frequencies in each selected band in that
area.
After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed.
Press and release the auto memory button
(
) to recall stations from the autostored stations. One stored station will be
selected each time; its frequency and
channel number will be displayed.
NOTE
If no stations can be tuned after scanning
operations, A will be displayed.
3. Repeat this operation for the other

stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.
NOTE
Auto memory tuning

This is especially useful when driving in
an area where the local stations are not
known. Additional AM/FM stations can
be stored without disturbing the
previously set channels.
6-33
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qOperating the Satellite Radio
Band selector buttons
Seek
tuning
buttons
Category
button
Electronic Serial
number/Display
button
Text button
Manual tuning
dial
Scan button
Instant replay button
Satellite button
Information display
All operations of the satellite radio are displayed on the Information display.
Channel number, Channel name, Category name, Artist name, Song title,
ID code, Preset channel number, Bank number, Error signs
6-34
Some models.
Form No.8AS3-EA-09E
Interior Comfort
Audio System
NOTE
What is satellite radio?
This equipment has been tested and found to

comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
- Increase the separation between the
equipment and tuner.
- Connect the equipment into an outlet on a
circuit different from that to which the tuner is
connected.
- Consult the dealer or an experienced radio/
TV technician for help.
With over 130 channels, SIRIUS Satellite

Radio brings you more of what you love.
Get 69 channels of 100 % commercialfree music, plus all your favorite sports,
news, talk and entertainment. Everything
worth listening to is now on SIRIUS.
100 % Commercial-free MusicWith
music from every genre, artist-dedicated
channels, live performances and more,
SIRIUS is the home of 100 %
commercial-free music.
Live Sports Play-by-Play & Expert
TalkHear every NFL game, every
NASCAR race and college sports
coverage from over 150 schools. Plus
24/7 sports talk with channels like
SIRIUS NFL Radio, SIRIUS NASCAR
Radio and more.
Exclusive Entertainment and
TalkThe biggest names, compelling
talk, hilarious comedy. Hear Howard
Stern, Martha Stewart, Jamie Foxx, Blue
Collar Comedy, Playboy Radio, political
talk and more.
World-class NewsStay informed with
FOX, CNN, CNBC, NPR, BBC and
more.
Plus local traffic and weather.
Family & KidsEntertain the entire
family with Radio Disney, Kids Place
Live, Laugh USA and more.
Sign up for SIRIUS Radio today! For
more information, visit www.sirius.com.
Satellite radio can be subscribed to and
received in the United States. (Except
Alaska and Hawaii) and Canada.
How to Activate Satellite Radio
You must call SIRIUS to activate your
service. Activation is free and takes only a
few minutes.
6-35
Form No.8AS3-EA-09E
Interior Comfort
Audio System
SIRIUS service uses an ID code to
identify your radio. This code is needed to
activate SIRIUS service, and report any
problems.
To activate you SIRIUS radio tuner, call a
SIRIUS customer service specialist at 1888-539-7474 or you can visit SIRIUS
online at www.sirius.com.
Please have the following information
ready:
l SIRIUS ID (12-digit electronic serial
no., or ESN*)
l Valid credit card information (may not
be required at initial sign-up)
Be sure you are parked outside with a
clear view of open sky, you will be
instructed to turn on your radio (in SAT
mode and tuned to channel 184).
Activation typically takes only 25
minutes.
*ESN: Electronic Serial Number
SIRIUS operation
All operations of the satellite radio are
conducted by means of the audio unit.
SIRIUS radio mode selection
When the satellite button is pressed during
ACC ON, it will play the last SIRIUS
channel in use before the mode was
switched over to another mode or the
power was turned off.
When the satellite button is pressed in a
mode other than the SIRIUS mode, the
last channel in use will be received.
6-36
Form No.8AS3-EA-09E
Every time the satellite button is pressed,

the bank changes in the order shown
below.
SR1
SR2
SR3
NOTE
SR1, SR2 and SR3: six stations can be stored
in each bank for convenient access to your
favorite stations.
Operation in the initial state

It may take some time to start up the
equipment when it is in the initial state,
when there is a change in the user's
subscription condition, or when the
SIRIUS channel map is changed.
UPDATING xx% is displayed when the
SIRIUS channel map is changed. If the
unit is initialized or the user contract
content is changed, UPDATING is
displayed. Updating could take as long as
three minutes depending on the
geographical area. When the unit is in an
initialized state, channel 184 is displayed
after the display indicates
UPDATING 100%. If the SIRIUS
channel map or the user contract content
is changed, the channel prior to the
change is displayed after UPDATING is
displayed. After the initialization display,
it may take as long as 12 seconds to
receive channel 184.
Interior Comfort
Audio System
NOTE
NOTE
Do not perform the following operation while

UPDATING is displayed. Otherwise, the
updating procedure will be cancelled.
l Turning off the audio power
l Switching to other modes
l Switching the ignition off
If the last channel selected has become

unavailable because of a channel update the
above indication is displayed until any button
is pressed.
When the SIRIUS mode is switched to

another mode, or when the power is
turned off, the present channel which is
being received is stored as the last
channel.
Channel selection
Turning the manual tuning dial allows you
to select the desired receiving channel.
l Turn the knob clockwise: Channel Up
l Turn the knob counterclockwise:
Channel Down
Unsubscribed channel
When a selected station has not been
subscribed to, the display indicates the
following:
[CALL
888] and [539
SIRI]
(Flashes alternately)
NOTE
When the subscription contract is canceled, all
of the channels including channel 184 appear
as unsubscribed.
Invalid channel
When a selected channel is not
broadcasting, [SR
(bank number)
INVALID] is displayed for one second,
followed by [SR
(bank number)
CHANNEL], which is also displayed for
one second. The display then returns to
the previous valid channel.
Preset channel programming

(Programming with channel number
display)
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
[SR
(bank number)
(channel
number)]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the channel number flashes. Then,
[SR
(bank number)] is displayed
and a beep sound is heard at the same
time.
(bank number)
CH
3. [SR
(preset number)
(channel number)]
are displayed.
(Programming with text display (e.g.
channel name))
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
[SR
(bank number)
(selected
text (e.g. channel name))]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the text (e.g. channel name)
flashes. Then, [SR
(bank number)]
is displayed and you will hear beep
sound at the same time.
6-37
Form No.8AS3-EA-09E
Interior Comfort
Audio System
3. SR
(bank number)
CH
(preset number)
(channel number)]
are displayed.
Highest category All categories

Lowest category
4. Three seconds later, it returns to normal

display. [SR
(bank number)
(text
(e.g. channel name))]
While all categories are selected, all channels

covering a category can be accessed
(Category off condition).
NOTE
Channel selection within a category

If you are in a selected category and the
channel number is displayed, turning the
manual tuning dial moves the channel
number up/down in that category.
l Turn the manual tuning dial clockwise:
Channel Up
l Turn the manual tuning dial
counterclockwise: Channel Down
Six stations can be stored in each bank, SR1,

SR2, and SR3 for convenient access to your
favorite stations.
Preset channel call-up

Press and release the channel preset
button,
[SR
(bank number)
CH
(preset
number)
(channel number)] appears.
When the preset button is pressed during
text mode, its channel number is
displayed first for three second and then
its text is displayed.
NOTE
In the initial setting, all channels are preset to
184.
Category change
Press the category button (UP or DOWN)
and select the desired category.
l Press the category button (UP):
Category up
l Press the category button (DOWN):
Category down
Every time the category (UP) button is
pressed for 1.5 second or less, the
category is changed over in the order
shown below.
At this time, the lowest (smallest-number)
channel within the category indicated is
received.
When the highest (or lowest) category is
reached, the category is changed over in
the order shown below.
6-38
Form No.8AS3-EA-09E
NOTE
NOTE
The channel number needs to be indicated in
the display to use manual tuning dial for this
function.
Scan tuning
) to
automatically sample stations. Scanning
stops at each station for about five
button (
NOTE
l
Unsubscribed channels, invalid channels,

parental lock channels and channel 0 are
not subject to the scan, therefore these
channels will skip automatically.
You can scan all channels while all
categories are selected. If you are in a
selected category, you can only scan the
channels in that category.
Interior Comfort
Audio System
Channel number, channel name,
category, artist, song titles and info
display
Each time the display button is pressed
during SIRIUS reception, the display of
the text data is changed over in the order
shown below.
Channel number
Channel name
Category
name
Info
Song title
Artist name
NOTE
l
Eight characters are displayed on one

screen.
To display the rest of the characters of a
).
long title, press the text button (
The display scrolls the next eight
)
characters. Press the text button (
again after the last eight characters have
been displayed to return to the beginning of
the title.
(Channel number display)

l When the display button is pressed
while in info display mode, the mode
changes to the channel number display
mode.
(Channel name display)
while in channel number display mode,
it changes to channel name display
mode.
l There are short (eight fixed characters)
and long names for the channel name.
The long name is displayed first, and

three seconds later the short name is
displayed. If there is no short name, the
long name is displayed.
To display the rest of the characters of
the channel name, press the text button
(
). The display scrolls the next
eight characters. Press the text button
(
) again after the last eight
characters have been displayed to
return to the beginning of the title.
Press the text button while the short
name is displayed to switch the display
to the long name.
Three seconds after scrolling the long
name, the display automatically returns
to the first part of the long name. Three
more seconds and the short name
appears.
If there is no channel name,
No TITLE is displayed.
(Category name display)

while in channel name display mode, it
changes to the category name display
mode.
l There are short (eight fixed characters)
and long names for the category name.
l The long name is displayed first, and
three seconds later the short name is
displayed. If there is no short name, the
long name is displayed.
l To display the rest of the characters of
the category name, press the text
button (
). The display scrolls the
next eight characters. Press the text
button (
) again after the last
eight characters have been displayed to
l Press the text button while the short
name is displayed to switch the display
to the long name.
6-39
Form No.8AS3-EA-09E
Interior Comfort
Audio System
l
Three seconds after scrolling the long

name, the display automatically returns
to display the first part of the long
name. Three more seconds and the
short name appears.
If there is no category name,
No CATEGORY is displayed.
(Artist name display)

while in category name display mode,
it changes to the artist name display
mode.
the artist's name, press the text button
(
(
l Three seconds after scrolling the artist
name, the display automatically return
to display the first part of the artist's
name.
l If there is no artist's name,
No ARTIST is displayed.
(Song title display)
while in artist name display mode, it
changes to the song title display mode.
the song title, press the text button
(
(
l Three more seconds after scrolling the
song title, the display automatically
returns to display the first part of the
song title.
l If there is no song title, No SONG is
displayed.
6-40
Form No.8AS3-EA-09E
(INFO (such as composer's name)

display)
while in song title display mode, it
changes to the INFO display mode.
the composer's name, press the text
button (
). The display scrolls the
next eight characters. Press the text
button (
) again after the last
eight characters have been displayed to
l Three seconds after scrolling the text,
the display automatically returns to
display the first part of the text.
l If there is no composer name,
No INFO is displayed.
Instant replay
This function allows you to rewind and
replay the program that you were
previously or are currently listening to.
Press the instant replay button ( ).
When the seek tuning button ( ) is
pressed (about 1.5 seconds), playback
starts from the beginning of the current
program.
pressed twice, playback starts from the
beginning of the previous program.
pressed for about 1.5 seconds or longer,
the program is reversed while the button
is being pressed.
pressed (about 1.5 seconds), playback
starts from the beginning of the next
program. When the seek tuning button
( ) is pressed (about 1.5 seconds) while
the last program is being played, the
instant replay mode is cancelled.
Interior Comfort
Audio System
pressed for 1.5 seconds or longer, the
program is fast-forwarded while the
button is being pressed. When pressing
and holding the button until the end of the
program, the instant replay mode is
cancelled.
When the instant replay button is pressed
again, playback is paused, or playback
starts if it has been paused.
Instant replay (PAUSE)
If the instant replay button is pressed
while the instant replay mode is off,
instant replay mode is turned on in a
paused condition (PAUSE). Press the
instant replay button again to resume
playback from the point at which it was
paused.
NOTE
l
If the channel is changed, the instant replay

buffer data is deleted.
After turning on the power and switching to
SIRIUS digital satellite radio mode, the
instant replay mode is not available for
several seconds after changing channels.
Displaying the SIRIUS ID (ESN)

When the ESN button is pressed for 1.5
seconds or longer, a 12-digit Electronic
Serial Number (ESN) for the SIRIUS
tuner is displayed.
(If the SIRIUS ID (ESN) for the tuner
does not display)
If ESN
FAIL is displayed after
pressing the ESN button for 1.5 seconds
or longer, contact an Authorized Mazda
Dealer.
Initialization of ID code
If the registered ID code is forgotten,
return the ID code to the default [0000] by
performing the following steps:
Setting condition: SAT mode
(Master code input preparation)
1. Press and hold the scan button, then
press channel preset button 4. Hold
both buttons together for 1.5 seconds.
2. ENTER PIN appears for three
seconds which indicates that it is in
code input mode.
3. SR1 - - - - appears, which indicates
that it is ready for code input.
(Master code input)
4. Input the master code using the channel
preset buttons 1-4.
(The master code is already set at the
time of factory shipment.)
(Master code input determination)
5. Determine the master code which has
been input by pressing the scan button.
6. PIN CLEARED appears which
indicates that the master code input has
been completed.
7. The ID code is set to the default [0000]
and the initialization process is
completed.
6-41
Form No.8AS3-EA-09E
Interior Comfort
Audio System
NOTE
Master code:
The Master Code is used to initialize or reinitialize the ID code in the event that the code
is not set to [0000] and/or the personalized ID
code is not known. The initialization process
resets the ID code to [0000]. The master code
can potentially defeat the intent of the security
of the parental lock if it is located by persons
not authorized by the owner to access certain
channels.
SIRIUS Satellite Radio Master Code: [0913]
NOTE
l
When a numeric value other than the

master code is input and the scan button is
pressed, SR1 Err is displayed and then it
returns to the SR1 - - - - display again.
If an ID code is not input for ten seconds,
Err is displayed and it returns to the
former display.
Channel preset buttons 1, 2, 3, 4 and the
scan button are used for inputting the ID
code. Buttons 5 and 6 cannot be used.
Change of ID code
When changing the ID code, the new ID
code is input after the previous one is
input first.
(Registered ID code input)
code input mode.
6-42
Form No.8AS3-EA-09E
4. Input the registered ID code using

channel preset buttons 1-4.
Example: When the registered ID code
is 2323, input 2323. At this time
SR1 2323 is displayed.
Press 1 for the first digit, 2 for the
second, 3 for the third, and 4 for the
last digit. For example, if your number
is 2323, press 1 three times (includes
0), 2 four times, 3 three times, and 4
four times. If the display goes off while
inputting, begin from Step 1.
NOTE
The registered ID code is the default [0000] at
the time of factory shipment. If [0000] results
in Err on the display, go to the
INITIALIZATION OF ID CODE section to
reset to [0000].
(Verification with the registered ID

code)
5. Determine the input code by pressing
the scan button.
6. If it does not match with the previously
registered code, SR1 Err is displayed
and then it returns to SR1 - - - -.
7. If it matches with the previously
registered code, ENTER PIN appears
again and it switches to code input
mode.
8. SR1 - - - - appears, and it is ready for
input of the new ID code.
(New ID code input)
9. Input the new ID code using channel
preset buttons 1-4.
Example: If 1234 is input as the new
code, SR1 1234 is displayed.
Interior Comfort
Audio System
(New ID code input determination)
10. Determine the new ID code which

has been input by pressing the scan
button.

channel preset buttons 1-4. Example: If
the registered ID code is 2323, input
2323. At this time SR1 2323 is
displayed.
11. PIN CHANGED appears for three

seconds which indicates that the new
ID code input has been completed.
12. It returns to the former display.
NOTE
l

former display.
scan button are used for input of the ID
Individual channel locking

If a channel is locked, the channel is
muted.
NOTE
If the registered ID code is forgotten, return
the ID code to the default [0000]. (See
INTIALIZATION OF ID CODE section)
(Registered ID code input

determination)
6. Determine the code which has been
input by pressing the scan button.
7. If it does not match the registered code,
SR1 Err is displayed and then it
returns to SR1 - - - -.
8. If it matches the registered code,
SR1 LOCK appears for three
seconds which indicates that the code
input has been completed.
9. SR1 LOCK 100 appears which
indicates that the parental lock is
activated. At this time, mute is on and
no sound is heard.
NOTE
l
(Locking a channel)
1. Select a channel to be locked by
turning the manual tuning dial.
Example: Select channel 100

former display.
(Registered ID code input preparation)

code input mode.
4. SR1 - - - - appears which indicates
Lock cancellation
(Releasing a locked channel)
1. Select a channel to be released by
Example: Select the locked channel
(i.e. 100). At this time,
SR1 LOCK 100 is displayed.
6-43
Form No.8AS3-EA-09E
Interior Comfort
Audio System
code input mode.
channel preset buttons 1-4. Example:
When the registered ID code is 2323,
input 2323. At this time SR1 2323
is displayed.
NOTE
If Err is displayed, go to the
INITIALIZATION OF ID CODE section to
reset the ID code to [0000].

determination)
6. Determine the input code by pressing
the scan button.
7. If it does not match the registered code,
SR1 Err is displayed and then it
returns to SR1 - - - -.
8. If it matches the registered code,
SR1 UNLOCK appears for three
seconds which indicates that the code
input has been completed.
9. SR1 100 appears which indicates that
the parental lock is off. At this time,
sound is heard.
6-44
Form No.8AS3-EA-09E
NOTE
l

former display.
MEMO
6-45
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qOperating the Compact Disc (CD) Player
Track up/Fast-forward button
CD slot
Load button
CD play button
CD eject button
Display button
Folder up
button
Folder
down button
Random
button
Repeat button
Scan button
Text button
Track down/Reverse button
Type
Playable data
Music/MP3/WMA CD Music data (CD-DA)
player
MP3/WMA file
NOTE
If a disc has both music data (CD-DA) and
MP3/WMA files, playback of the two or three
file types differs depending on how the disc
was recorded.
Inserting the CD
Insert the CD into the slot, label-side up.
The auto-loading mechanism will set the
CD and begin play.
NOTE
There will be a short lapse before play begins
while the player reads the digital signals on
the CD.
6-46
Form No.8AS3-EA-09E
Ejecting the CD
Press the CD eject button (
CD.
) to eject the
Playback
Press the CD play button ( ) to start
play when a CD is in the unit.
If a CD is not in the unit when the CD
play button ( ) is pressed, NO DISC
will flash on and off.
NOTE
When the load button (
) is pressed, the
CD will load and play even if the CD eject
button ( ) had been previously pressed.
Interior Comfort
Audio System
Fast-forward/Reverse
During MP3/WMA CD playback
Press and hold the fast-forward button

( ) to advance through a track at high
speed.
Press and hold the reverse button ( ) to
reverse through a track at high speed.
(Track repeat)
Track search
Press the track up button ( ) once to skip
forward to the beginning of the next track.
Press the track down button ( ) once to
skip back to the beginning of the current
track.
Folder search (during MP3/WMA CD
playback)
To change to the previous folder, press the
folder down button ( ), or press the
folder up button ( ) to advance to the
next folder.
1. Press the repeat button (

) during
playback to play the current track
repeatedly. TRACK RPT is
displayed.
2. To cancel the repeat playback, press the
button again after 3 seconds.
(Folder repeat)
) during
playback, and then press the button
again within 3 seconds to play the
tracks in the current folder repeatedly.
FOLDER RPT is displayed.
2. Press the button again to cancel the
repeat playback.
Random playback
Music scan
Tracks are randomly selected and played.
This feature helps to find a program by

playing about the first 10 seconds of each
track.
During music CD playback

) during
playback to start the scan play operation
(the track number will flash).
) again to
cancel scan playback.

random playback.
NOTE
(Folder random)
If the unit is left in scan, normal playback will

resume where scan was selected.
Repeat playback
) during
repeatedly. RPT is displayed.
1. Press the random button (

) during
playback to play the tracks on the CD
randomly. RDM is displayed.

) during
playback to play the tracks in the folder
randomly. FOLDER RDM is
displayed.
2. To cancel the random playback, press
the button again after 3 seconds.

repeat playback.
6-47
Form No.8AS3-EA-09E
Interior Comfort
Audio System
(CD random)
MP3/WMA CD

) during
tracks on the CD randomly.
DISC RDM is displayed.
File number/Elapsed time
Folder number/File number

random playback.
File name
Switching the display

For files with a file name or other name
that have been input, the display changes
in the order of the file names or other
names each time the display button (
)
is pressed during playback.
Music CD
Folder name
Album name (ID3 Tag)
Song name (ID3 Tag)
Track number/Elapsed time

Artist name (ID3 Tag)
Track name*
Album name*
Artist name*
*Depending on the CD, this information
may not be available.
NOTE
(MP3/WMA CD)
This unit can only read English (including
numerals) one-byte characters. Depending on
the CD writing software used, proper display
may not be possible.
Display scroll
Only 8 characters (File name) or 12
characters (Except file name) can be
displayed at one time. To display the rest
of the characters of a long title, press the
text button (
). The display scrolls
the next 12 characters. Press the text
button (
) again after the last 12
characters have been displayed to return
to the beginning of the title.
6-48
Form No.8AS3-EA-09E
Interior Comfort
Audio System
NOTE
The displayable number of characters is
limited. If the number of characters, including
the file extension (.mp3/.wma), exceeds 32
characters, it may not be fully displayed.
Message display
If CHECK CD is displayed, it means
that there is some CD malfunction. Check
the CD for damage, dirt, or smudges, and
then properly reinsert. If the message
appears again, take the unit to an
Authorized Mazda Dealer for service.
6-49
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qOperating the In-Dash CD Changer
Track up/Fast-forward button
CD eject button
Load button
Display button
Disc
up/Folder up
button
Disc
down/Folder
down button
Random
button
Repeat
button
Scan button
Text button
CD play button
CD slot
Track down/Reverse button

Type
Playable data
Music/MP3/WMA CD Music data (CD-DA)
player
MP3/WMA file
NOTE
was recorded.
Inserting the CD
The CD must be label-side up when
inserting. The auto-loading mechanism
will set the CD and begin play.
NOTE
the CD.
6-50
Form No.8AS3-EA-09E
Normal insertion
1. Press the load button (
).
2. When IN is displayed, insert the CD.

Inserting CDs into desired tray number
1. Press and hold the load button (
)
for about 2 seconds until a beep sound
is heard.
2. Press the channel preset button for the
desired tray number while WAIT is
displayed.
NOTE
The CD cannot be inserted to the desired tray
number if the number is already occupied.
Interior Comfort
Audio System
Multiple insertion
Multiple ejection

)
is heard.
1. Press and hold the CD eject button ( )

is heard.
The DISC OUT display flashes.

3. When IN is displayed again, insert
the next CD.
2. Press the CD eject button ( ) again

for less than 5 seconds after the beep
sound is heard.
NOTE
NOTE
The first-inserted CD will be played

automatically when:
l No other CD is inserted within 15 seconds
after IN is displayed.
l The CD trays are full.
Ejecting the CD
Normal ejection
1. Press the CD eject button ( ). The
disc number and DISC OUT will be
displayed.
2. Pull out the CD.
NOTE
When the CD is ejected during play, the next
CD will be played automatically.
Ejecting CDs from desired tray number

1. Press and hold the CD eject button ( )
is heard.
The DISC OUT display flashes.
2. Press the channel preset button for the
desired CD number for less than 5
seconds after the beep sound is heard.
3. Pull out the CD.
If the button is not pressed and about 5

seconds have elapsed while DISC OUT is
flashing, CDs are automatically ejected.
3. Pull out the CD, then the next CD will

be ejected.
NOTE
l
CDs will be ejected starting with the one

with the lowest number.
All CDs in the tray will be ejected
continuously.
CDs can be ejected when the ignition is
switched off. Press and hold the CD eject
button ( ) for about 2 seconds and all
CDs will eject.
Playback
Press the CD play button ( ) to start
If a CD is not in the unit when the CD
play button ( ) is pressed, NO DISC
will flash on and off.
( ) to advance through a track at high
speed.
Press and hold the reverse button ( ) to
reverse through a track at high speed.
Track search
Press the track up button ( ) once to skip
forward to the beginning of the next track.
6-51
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Press the track down button ( ) once to
skip back to the beginning of the current
track.
Disc search
To change the disc, press the DISC button
( or ) during playback.
To change the disc, press the DISC button
( or ) for 1.5 seconds or more during
playback.
playback)
To change to the previous folder, press the
folder down button ( ) for less than 1.5
seconds, or press the folder up button ( )
for less than 1.5 seconds to advance to the
next folder.
Music scan
This feature helps to find a program by
playing about the first 10 seconds of each
track.

repeat playback.
(Track repeat)
) during
repeatedly. TRACK RPT is
displayed.
2. To cancel the repeat playback, press the
button again after 3 seconds.
(Folder repeat)
) during
tracks in the current folder repeatedly.
FOLDER RPT is displayed.
repeat playback.
Random playback
) during
playback to play the tracks in the CD
randomly. RDM is displayed.

) during
playback to start the scan play operation
(the track number will flash).
) again to

random playback.
NOTE

(Folder random)
Repeat playback
) during
repeatedly. RPT is displayed.
6-52
Form No.8AS3-EA-09E

) during
randomly. FOLDER RDM is
displayed.
2. To cancel the random playback, press
the button again after 3 seconds.
Interior Comfort
Audio System
(CD random)
MP3/WMA CD

) during
tracks on the CD randomly.
DISC RDM is displayed.
Disc number/File
number/Elapsed time
Disc tray number

random playback.
Disc number/Folder
number/File number
Switching the display

File name
For files with a file name or other name

that have been input, the display changes
in the order of the file names or other
names each time the display button (
)
is pressed during playback.
Music CD
Folder name
Album name (ID3 Tag)
Disc number/Track
number/Elapsed time
Song name (ID3 Tag)

Artist name (ID3 Tag)
Disc tray number

Track name*
NOTE
Album name*
Artist name*
*Depending on the CD, this information
(MP3/WMA CD)
This unit can only read English (including
numerals) one-byte characters. Depending on
the CD writing software used, proper display
may not be possible.
Display scroll
Only 8 characters (File name) or 12
characters (Except file name) can be
displayed at one time. To display the rest
of the characters of a long title, press the
text button (
). The display scrolls
the next 12 characters. Press the text
button (
) again after the last 12
characters have been displayed to return
to the beginning of the title.
6-53
Form No.8AS3-EA-09E
Interior Comfort
Audio System
NOTE
The displayable number of characters is
limited. If the number of characters, including
the file extension (.mp3/.wma), exceeds 32
characters, it may not be fully displayed.
Message display
If CHECK CD is displayed, it means
that there is some CD malfunction. Check
the CD for damage, dirt, or smudges, and
then properly reinsert. If the message
appears again, take the unit to an
Authorized Mazda Dealer for service.
qOperating the Auxiliary jack

You can connect portable audio units or
similar products on the market to the
auxiliary jack to listen to music or audio
over the vehicle's speakers, refer to
Auxiliary Input (page 6-84).
6-54
Some models.
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qError Indications
If you see an error indication on the display, find the cause in the chart. If you cannot clear
the error indication, take the vehicle to an Authorized Mazda Dealer.
Indication
ACQUIRING
ANTENNA FAIL
CHECK CD
Cause
Solution
Depending on the
surrounding conditions
(such as large trees, buildImprove reception by moving away from possible
ings, or tunnels) and special
obstructions. If the error indication continues to display,
weather conditions,
SIRIUS radio reception
may be diminished or
temporarily interrupted.
Check the satellite radio antenna, antenna cable and
DLP antenna connector. If the error indication continues
malfunction
to display, consult an Authorized Mazda Dealer.
Insert the CD properly. If the error indication continues
CD is inserted upside down
Insert another CD properly. If the error indication
CD is defective
continues to display, consult an Authorized Mazda
Dealer.
NOTE
If a broken DLP* unit is replaced with a new unit, cancel the license for the broken unit and make
sure to carry out new registration for the replaced unit. If the license for the broken unit is not
canceled, you will be charged a reception fee for both units.
* DLP: Down Link Processor (SATELLITE RADIO Module)
6-55
Form No.8AS3-EA-09E
MEMO
6-56
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Audio Set (Type B)
Functions and information available for the selected mode are displayed on the left and
right of the audio unit screen. To select and operate a desired function, or select
information, press the corresponding selection button 18.
Selection
button 1
Selection
button 5
Selection
button 2
Selection
button 3
Selection
button 6
Selection
button 7
Selection
button 4
Selection
button 8
Screen Adjustments and Other Settings ................................................................. page 6-58

Power/Volume/Sound Controls .............................................................................. page 6-60
Operating the Radio ............................................................................................... page 6-64
Operating the Satellite Radio ................................................................................. page 6-66
Operating the In-Dash CD Changer ....................................................................... page 6-76
Operating the Auxiliary Jack .................................................................................. page 6-79
Error Indications ..................................................................................................... page 6-80
6-57
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qScreen Adjustments and Other Settings
Selection
button 1
Selection
button 5
Selection
button 2
Selection
button 3
Selection
button 6
Selection
button 7
Selection
button 4
Selection
button 8
Display button
Press the display button (

) to
display the tone adjustment screen.
Press the button again to return to the
previous screen.
Next page display*
Press selection button 1.
Previous page display*
Initialization
Returns all the adjusted screen adjustment
settings and language settings to their
initial setting.
Decrease brightness
Contrast adjustment
Higher contrast
Lower contrast
Tint adjustment*
Green tint enhancement
Brightness adjustment
Red tint enhancement
Increase brightness
6-58
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Color adjustment*
NOTE
To deepen a color
A language setting is unavailable for the

satellite radio. English is constantly displayed.

To fade color
* Adjustment is available depending on
the display.
Screen display off

Press the display button (
) to
return to the previously selected mode's
screen.
NOTE
Continuous adjustment of the brightness,
contrast, tint, and color can be done by longpressing the selection button for the adjustment
item.
Daytime/Night screen
When the headlights are on, daytime
mode can also be selected (if a brighter
screen is needed at night). This selection
can only be done when the headlights are
on.
The screen can be returned to the daytime
screen while the headlights or running
lights are on by pressing the dashboard
illumination knob.
Language setting
The displayed language can be changed to
one of the three available languages.
Press selection button 5 to display the
language setting screen.
English display
French display
Spanish display
6-59
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qPower/Volume/Sound Controls
Selection
button 1
Selection
button 5
Selection
button 2
Selection
button 3
Selection
button 6
Selection
button 7
Selection
button 8
Power/Volume dial
Power ON/OFF
Switch the ignition to ACC or ON.
Press the power/volume dial to turn the
audio system on.
Press the power/volume dial again to turn
the audio system off.
NOTE
do not leave the audio system on for a long
period of time when the engine is not running.
Volume adjustment
To adjust the volume, turn the power/
volume dial.
Turn the power/volume dial to the right to
6-60
Form No.8AS3-EA-09E
Audio control button
Audio sound adjustment

When the audio control button
(
) is pressed, the audio settings
screen is displayed.
Press the button to return to the previous
screen.
Next page display
Previous page display
Initialization
Returns all of the audio setting items to
their initial setting.
Interior Comfort
Audio System
Setting item
Bass
Treble
Fader
Balance
Beep
AudioPilot 2
Centerpoint
Welcome
Setting value
Down
Up
Down
Up
Rear
Front
Left
Right
Off
On
Off
On
Off
On
Off
On
NOTE
Continuous adjustment of the bass, treble,
fader, and balance can be done by longpressing the selection button for each
adjustment item.
Beep setting
The beep-sound when operating the audio
system can be set on or off.
Beep on
Bass (low pitch sound)
Low pitch enhancement
Beep off
AudioPilot 2
AudioPilot 2 automatically adjusts audio
volume and sound quality in accordance
with the level of noise entering the vehicle
interior while driving. When AudioPilot
2 is turned on, the system automatically
calculates the conditions for optimum
hearing of sound which may be difficult
to hear depending on exterior noise.
AudioPilot 2 can be set on or off.
Fader (front/back volume balance)
AudioPilot 2 on
Rear speaker volume reduction

Low pitch attenuation

Treble (treble sound)
Treble enhancement
Treble attenuation
Front speaker volume reduction

Balance (left/right volume balance)
Left side volume reduction
Right side volume reduction
AudioPilot 2 off
* AudioPilot 2 is a registered trademark
*Centerpoint
Centerpoint offers you the experience of
5.1-channel surround sound in your
vehicle even with your conventional 2channel stereo CDs.
Centerpoint can be set on or off.
Centerpoint on
6-61
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Centerpoint off
NOTE
l
Centerpoint operates optimally with a 2channel stereo CD. MP3 audio files can be
played, however, MP3 audio files encoded
with high compression may result in poor
sound quality.
Centerpoint is available for 2-channel
stereo audio except for AM radio/FM radio/
SIRIUS digital satellite radio/AUX/BT
audio.
* Centerpoint is a registered trademark

Welcome mode
Sound is heard when the ignition is
switched on.
The Welcome mode can be set on or off.
Welcome on
Welcome off
6-62
Form No.8AS3-EA-09E
MEMO
6-63
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qOperating the Radio
Band selector button
Selection
button 2
Selection
button 5
Seek tuning
buttons
Selection
button 6
Selection
button 7
Selection
button 3
Selection
button 4
Selection
button 8
Scan button
Mute button Auto memory button
Radio ON
Press a band selector button (
turn the radio on.
) to
Band selection
Successively pressing the band selector
button (
) switches the bands as
follows: FM1 FM2 AM.
The selected mode will be indicated. If
FM stereo is being received, ST will be
displayed.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise, and the
ST indicator will no longer display.
6-64
Form No.8AS3-EA-09E
Manual tuning dial
Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
Seek tuning
Pressing the seek tuning button ( , )
will cause the tuner to seek a higher or
lower frequency automatically.
Interior Comfort
Audio System
NOTE
If you continue to press and hold the seek
), the frequency will
tuning button ( ,
continue changing without stopping.
Scan tuning
) to
automatically sample stations with the
strongest frequencies. Scanning stops at
each station for about five seconds. To
hold a station, press the scan button
(
Preset channel tuning
The six preset channels can be used to
store six AM and twelve FM stations.
1. To set a channel, first select AM, FM1,
or FM2. Tune to the desired station.
2. Press and hold selection button 2, 3, 4,
6, 7, or 8. The station frequency will be
displayed. The station is now held in
the memory.
3. Repeat this operation for the other
stations and bands you want to store.
To tune into one stored in the memory,
select AM, FM1, or FM2 and then
press its selection button. The station
frequency will be displayed.
Press and hold the auto memory button

(
). The system will automatically
scan and temporarily store up to six
stations with the strongest frequencies in
each selected band in that area.
After scanning is completed, the radio
tunes into the station with the strongest
frequency, and its frequency is displayed.
Press the auto memory button (
) to
recall stations from the auto-stored
stations. One stored station will be
selected each time, and its frequency will
be displayed.
NOTE
If the radio is unable to tune into any station
after the scanning operation is completed,
No Channel will be displayed.
Mute
Press the mute button (
) once to
mute the audio. Press it again to resume
audio output.
Radio Data System (RDS)
Radio text information display
A maximum of 64 characters of radio text
information sent from a broadcasting
station is displayed in the audio display.
NOTE
Auto memory tuning

This is especially useful when driving in
an area where the local stations are
unknown. Additional AM/FM stations
can be stored without disturbing the
previously set channels.
6-65
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qOperating the Satellite Radio
Band selector button
Selection
Selection SIRIUS button
button 3
button 8
Selection
Selection
button 4
button 7
Selection
button 1
Selection
button 5
Selection
button 2
Selection
button 6
Category up
button
Seek tuning
buttons
Scan button
Play/Pause button
6-66
Form No.8AS3-EA-09E
Return button
Category down
button
Manual tuning dial/Enter button
Interior Comfort
Audio System
NOTE
What is satellite radio?
This equipment has been tested and found to

comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
l Increase the separation between the
equipment and tuner.
l Connect the equipment into an outlet on a
circuit different from that to which the tuner
is connected.
l Consult the dealer or an experienced radio/
TV technician for help.
With over 130 channels, SIRIUS Satellite

Radio brings you more of what you love.
Get 69 channels of 100 % commercialfree music, plus all your favorite sports,
news, talk and entertainment. Everything
worth listening to is now on SIRIUS.
100 % Commercial-free MusicWith
music from every genre, artist-dedicated
channels, live performances and more,
SIRIUS is the home of 100 %
commercial-free music.
Live Sports Play-by-Play & Expert
TalkHear every NFL game, every
NASCAR race and college sports
coverage from over 150 schools. Plus
24/7 sports talk with channels like
SIRIUS NFL Radio, SIRIUS NASCAR
Radio and more.
Exclusive Entertainment and
TalkThe biggest names, compelling
talk, hilarious comedy. Hear Howard
Stern, Martha Stewart, Jamie Foxx, Blue
Collar Comedy, Playboy Radio, political
talk and more.
World-class NewsStay informed with
FOX, CNN, CNBC, NPR, BBC and
more.
Plus local traffic and weather.
Family & KidsEntertain the entire
family with Radio Disney, Kids Place
Live, Laugh USA and more.
Sign up for SIRIUS Radio today! For
more information, visit www.sirius.com.
Satellite radio can be subscribed to and
received in the United States (Except
Alaska and Hawaii) and Canada.
How to Activate Satellite Radio
You must call SIRIUS to activate your
service. Activation is free and takes only a
few minutes.
6-67
Form No.8AS3-EA-09E
Interior Comfort
Audio System
SIRIUS service uses an ID code to
identify your radio. This code is needed to
activate SIRIUS service, and report any
problems.
To activate you SIRIUS radio tuner, call a
SIRIUS customer service specialist at 1888-539-7474 or you can visit SIRIUS
online at www.sirius.com.
Please have the following information
ready:
l SIRIUS ID (12-digit electronic serial
no., or ESN*)
l Valid credit card information (may not
be required at initial sign-up)
Be sure you are parked outside with a
clear view of open sky, you will be
instructed to turn on your radio (in
SIRIUS mode and tuned to channel 184).
Activation typically takes only 25
minutes.
* ESN: Electronic Serial Number
SIRIUS operation
All operations of the satellite radio are
conducted by means of the audio unit.
SIRIUS radio mode selection
When the SIRIUS button (
) is
pressed during ACC ON, it will play the
last SIRIUS channel in use before the
mode was switched over to another mode
or the power was turned off.
6-68
Form No.8AS3-EA-09E
When the SIRIUS button (

) is
pressed in a mode other than the SIRIUS
mode, the last channel in use will be
received. Every time the SIRIUS button
(
) is pressed, the bank changes in
SIRIUS1
SIRIUS2
SIRIUS3
NOTE
SIRIUS1, SIRIUS2 and SIRIUS3: six stations
can be stored in each bank for convenient
access to your favorite stations.
Operation in the initial state

It may take some time to start up the
equipment when it is in the initial state,
when there is a change in the user's
subscription condition, or when the
SIRIUS channel map is changed.
Interior Comfort
Audio System
Updating channels XXX% complete is
displayed when the SIRIUS channel map
is changed. If the Updating channels
XXX% complete display is not available,
Updating channels is displayed. If the
unit is initialized or the user contract
content is changed, Updating channels.
Subscription Updated. is displayed.
Updating could take as long as a few
minutes depending on the geographical
area. When the unit is in an initialized
state, channel 184 is displayed after the
display indicates Updating channels
XXX% complete. If the SIRIUS channel
map or the user contract content is
changed, the channel prior to the change
is displayed after Updating channels
XXX% complete is displayed. After the
initialization display, it may take as long
as ten seconds or more to receive channel
184.
Unsubscribed channel
When a selected station has not been
subscribed to, the display indicates the
following:
Call 888-539-7474
To Subscribe
NOTE
When the subscription contract is canceled, all
of the channels including channel 184 appear
as unsubscribed.
Invalid channel
When a selected channel is not
broadcasting, Invalid is displayed.
NOTE
If the last channel selected has become
unavailable because of a channel update the
above indication is displayed until any button
is pressed.
NOTE
Preset channel programming
Do not perform the following operation while

Updating is displayed. Otherwise, the
updating procedure will be canceled.
l Turning off the audio power
l Switching to other modes
l Switching the ignition off
1. Turn the manual tuning dial and select

the desired channel.
When the SIRIUS mode is switched to

another mode, or when the power is
turned off, the present channel which is
being received is stored as the last
channel.
Six stations can be stored in each bank,

SIRIUS1, SIRIUS2 and SIRIUS3 for
convenient access to your favorite stations.
Channel selection
Turning the manual tuning dial allows you
to select the desired receiving channel.
Channel up
Turn the manual tuning dial clockwise.
Channel down
Turn the manual tuning dial
counterclockwise.
2. Press and hold selection button 2, 3, 4,

6, 7, or 8.
NOTE
Preset channel call-up

Press selection button 2, 3, 4, 6, 7, or 8.
NOTE
In the initial setting, all channels are preset to
184.
Category change
Press the category button (
select the desired category.
) and
6-69
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Category up
Press the category up button ( ).
Category down
Press the category down button ( ).
Every time the category up button ( ) is
pressed, the category is changed over in
At this time, the lowest (smallest-number)
channel within the category indicated is
received.
When the highest (or lowest) category is
reached, the category is changed over in
Highest category Lowest category
XXX category
Category set (Category lock)
Press selection button 1 to lock the
category of the channel being received.
Press selection button 1 again to clear the
lock.
NOTE
l
Channel number, channel name,

category name, artist name, song titles
and information display
The information regarding the channel
which is currently being received is
displayed.
NOTE
l
NOTE
A category can be set only when a channel
which belongs to a category is being received.
Channel selection within a category

To select a radio station in a set category,
turn the manual tuning dial.
NOTE
l
The channel number needs to be indicated

in the display to use the manual tuning dial
for this function.
To select a radio station other than one in a
set category, turn the manual tuning dial.
Scan tuning
) to
automatically sample stations. Scanning
stops at each station for about five
button (
6-70
Form No.8AS3-EA-09E
Unsubscribed channels, invalid channels,

parental lock channels and channel 0 are
not subject to the scan, therefore these
channels will skip automatically.
If a category is set, scan channels in the
category. If a category is not set, scan all
channels.
If the entire title cannot be displayed, ...

is added at the end to the part of the title
which can be displayed.
If a channel other than a parental-locked
channel is received, channel name,
category name, artist name, song title, and
information are displayed.
(Channel number display)

The channel number for the channel
currently being received is displayed.
(Channel name display)
l
The channel name for the channel

A channel name may have a full title
and an abbreviated title. In this case,
the full title is displayed. If the channel
only has an abbreviated title, it is
displayed.
If there is no channel name, No Title
is displayed.
(Category name display)

l The category name for the channel
Interior Comfort
Audio System
(Artist name display)

l The artist name for the channel
l If there is no artist name, No Artist is
displayed.

pressed while the last program is being
played, the instant replay mode is
canceled.
Press and hold the seek tuning button
( ) to fast-forward the program while
the button is being pressed. When
pressing and holding the button until the
end of the program, the instant replay
mode is canceled.
When the Play/Pause button ( ) is
pressed again, playback is paused, or
playback starts if it has been paused.
(Song title display)
Instant replay (PAUSE)
A category name may have a full title

and an abbreviated title. In this case,
the full title is displayed. If the
category only has an abbreviated title,
it is displayed.
If there is no category name, No
Category is displayed.
The song title for the channel currently

being received is displayed.
If there is no song title, No Song is
displayed.
(Information display)
l
The information for the channel

If there is no information, No
Information is displayed.
Instant replay
This function allows you to rewind and
replay the program that you were
previously or are currently listening to.
Press the Play/Pause button ( ).
pressed, playback starts from the
beginning of the current program.
pressed twice, playback starts from the
beginning of the previous program.
Press and hold the seek tuning button
( ) to reverse the program while the
button is being pressed.
pressed, playback starts from the
beginning of the next program.
If the Play/Pause button ( ) is pressed

while the instant replay mode is off,
instant replay mode is turned on in a
paused condition (PAUSE). Press the
Play/Pause button ( ) again to resume
playback from the point at which it was
paused.
Displaying the SIRIUS ID (ESN)
Method 1
Turn the manual tuning dial and select
channel 0 to display the twelve-digit
Electronic Serial Number (ESN) for the
SIRIUS tuner.
Method 2
1. Press selection button 5 to display the
settings screen.
2. Press selection button 5 again to
display the twelve-digit Electronic
Serial Number (ESN) for the SIRIUS
tuner.
(If the SIRIUS ID (ESN) for the tuner
does not display)
If ESN Fail is displayed, contact an
6-71
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Parental lock
Parental lock, parental lock ID change,
parental unlock, and parental lock ID reset
can be set.
NOTE
l
Press the return button (

) during
all the settings to return to the previous
display.
Turn the manual tuning dial during the ID
code or master code input to select CLR,
) to
and then press the enter button (
delete an input number.
If there is no input for ten seconds during
the ID code or master code input, the
system returns to the settings screen.
If only a four-digit ID code or master code
is input, OK can be selected.
If the registered ID code has been forgotten,
reset the code in Parental-lock ID reset
to [0000].
Parental lock
If a channel is locked, the channel is
muted.
(Channel locking)
1. Turn the manual tuning dial to select
the desired channel.

confirmation)
6. After inputting the four digits, turn the
manual tuning dial and select OK,
and then press the enter button
(
) to confirm the four digits.
7. If the four digits match the registered
ID code, Parental lock appears and
mute is turned on.
If they do not match the registered ID
code, Error appears and then the
display returns to - - - -.
Parental-lock ID change
When changing the ID code, the new ID
code is input after the previous one is
input first.
settings screen.
ID code change screen.
3. Enter Pin and - - - - are displayed,
and input of the registered ID code is
possible.

settings screen.
4. Turn the manual tuning dial to select a

number and press the enter button
(
) to input the number.

parental lock settings screen.

confirmation)

possible.

(

(
6-72
Form No.8AS3-EA-09E
Interior Comfort
Audio System
ID code, Enter Pin and - - - - are
displayed.
(New ID code input)
(
(New ID code input confirmation)
(
9. Pin Changed appears to indicate that
the new ID code input has been
completed.
10. The display returns to its normal
display.
NOTE
Channels locked before changing the ID code
remain after changing the ID code. To unlock a
channel, input the changed ID code.
Parental unlock
Channels locked using the parental lock
function can be unlocked.
(Channel unlocking)
1. Select a channel to be unlocked by
settings screen.
parental unlock screen.

possible.
(
confirmation)
(
ID code, Parental unlock appears and
mute is canceled.
Parental-lock ID reset
If the registered ID code has been
forgotten, reset the ID code to the default
[0000] code.
(Master code input preparation)
settings screen.
ID code initial screen.
possible.
(Master code input)
number and then press the enter button
(
6-73
Form No.8AS3-EA-09E
Interior Comfort
Audio System
NOTE
Master code:
The Master Code is used to initialize or reinitialize the ID code in the event that the code
is not set to [0000] and/or the personalized ID
code is not known. The initialization process
resets the ID code to [0000]. The master code
can potentially defeat the intent of the security
of the parental lock if it is located by persons
not authorized by the owner to access certain
channels.
SIRIUS Satellite Radio Master Code: [0913]
(Master code input confirmation)

(
6. If the four digits match the master
code, Pin Cleared appears.
If they do not match the master code,
Error appears and the display returns
to - - - -.
7. The ID code returns to the default
[0000] code.
6-74
Form No.8AS3-EA-09E
MEMO
6-75
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qOperating the In-Dash CD Changer
Load button
Selection
Selection
button 3
button 8
Selection
Selection
CD play button
button 4
button 7
CD eject button
Selection
button 5
Selection
button 6
Folder up
button
Selection
button 1
Selection
button 2
Track up
button
Track down
button
Folder down
button
Scan button
File dial
Play/Pause button
Type
Music/MP3/WMA CD
player
l
l
Playable data
Music data (CD-DA)
MP3/WMA file
NOTE
was recorded.
Inserting the CD
The CD must be label-side up when
inserting. The auto-loading mechanism
will set the CD and begin play.
NOTE
The CD will begin playback automatically
after insertion. A CD cannot be inserted while
the display reads Please Wait.
the CD.
6-76
Form No.8AS3-EA-09E
Normal CD insertion
).
2. When Please Insert a Disc is

displayed, insert the CD.
Inserting CDs into desired tray number
).
2. Press the selection button for the

desired tray number while
Please Wait is displayed.
NOTE
The CD cannot be inserted to the desired tray
number if the number is already occupied.
Interior Comfort
Audio System
NOTE
Multiple CD insertion
If the button is not pressed and about five

seconds have elapsed while Disc Ejecting is
displaying, CDs are automatically ejected.
).

) again.
When Please Insert a Disc is
3. Remove the CD, then the next CD will

be ejected.

displayed again, insert the next CD.
NOTE
l
NOTE
The first-inserted CD will be played
automatically when:
l No other CD is inserted within 15 seconds
after Please Insert a Disc is displayed.
l The CD trays are full.
CDs will be ejected starting from the one in

the tray with the lowest number.
All CDs in the trays will be ejected
continuously.
CDs can be ejected when the ignition
switch is off. Press and hold the CD eject
button ( ) to eject all CDs.
Ejecting CDs
Playback
Normal ejection
Press the CD play button (

) to start
If the CD play button (
) is pressed
when a CD is not inserted and an external
device is not connected, No Disc is
displayed.
All of the following information is
displayed during playback.
1. Press the CD eject button ( ).

Disc Ejecting will be displayed.
2. Remove the CD.
NOTE
When the CD is ejected during play, the next
CD will be played automatically.
Ejecting CDs from desired tray number

1. Press and hold the CD eject button (
2. Press the selection button for the
desired tray number while
Disc Ejecting is displayed.
3. Remove the CD.
Music CD
The track number, elapsed time, album
name, artist name, and song name are
displayed.
MP3/WMA CD
The folder number, track number, elapsed
time, folder name, album name, artist
name, and song name are displayed.
Multiple CD ejection
1. Press and hold the CD eject button
( ).
2. Press the CD eject button (
) again.
6-77
Form No.8AS3-EA-09E
Interior Comfort
Audio System
NOTE
NOTE
If the entire title cannot be displayed, ... is

added at the end to the part of the title which
can be displayed.
If title information is not available,
NO TITLE is displayed.
If there are any undisplayable characters in
the title, - - - - - - - - is displayed.
Some CDs cannot display information.
Press and hold the ( ) or ( ) button to

continuously move up or down through the
folders.
Pause
Press the button again to resume
playback.
Fast-forward
( ).
Reverse
).
Track search
This function scans the titles on a CD and

plays ten seconds of each song to aid you
in finding a song you want to listen to.
This function scans the titles in a folder
currently being played and plays ten
seconds of each song to aid you in finding
a song you want to listen to.
) during
playback to start the scan play operation.
) again to
NOTE
Track up
Press the track up button (
file dial clockwise.
Press and hold the reverse button (
Music scan
) or turn the
Repeat playback
Track down
Press the track down button ( ) or turn
the file dial counterclockwise.
Disc search
Press the selection button for the desired
tray number.
1. Press selection button 1 during

repeatedly. Repeat Track is
displayed.
2. Press selection button 1 again to cancel
the repeat playback.

playback)
Folder up
Press the folder up button (

repeatedly. Repeat Track is
displayed.
).
Folder down
Press the folder down button (
).
6-78
Form No.8AS3-EA-09E
(Track repeat)
Interior Comfort
Audio System
2. Press selection button 1 twice to cancel
(Folder repeat)
1. Press selection button 1 twice during
playback to play the tracks in the
current folder repeatedly.
Repeat Folder is displayed.
Random playback
Message display
If Check Disc is displayed, it means that
there is a CD malfunction. Check the CD
for damage, dirt, or smudges, and then
properly reinsert. If the message appears
again, take the unit to an Authorized
Mazda Dealer for service.
qOperating the Auxiliary Jack

over the vehicle's speakers, refer to
Auxiliary Input (page 6-84).

playback to play the tracks in the CD
randomly. Random Disc is displayed.
the random playback.
(Folder random)
randomly. Random Folder is
displayed.
2. Press selection button 5 twice to cancel
(All random)
1. Press selection button 5 twice during
playback to play the tracks on the CD
randomly. Random All is displayed.
6-79
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qError Indications
If you see an error indication on the display, find the cause in the chart. If you cannot clear
the error indication, take the vehicle to an Authorized Mazda Dealer.
Indication
Acquiring Signal
Antenna Fail
Check Disc
Cause
Solution
Depending on the
surrounding conditions
(such as large trees, buildImprove reception by moving away from possible
ings, or tunnels) and special
obstructions. If the error indication continues to display,
weather conditions,
SIRIUS radio reception
may be diminished or
temporarily interrupted.
Check the satellite radio antenna, antenna cable and
DLP antenna connector. If the error indication continues
malfunction
Insert the CD properly. If the error indication continues
CD is inserted upside down
Insert another CD properly. If the error indication
CD is defective
continues to display, consult an Authorized Mazda
Dealer.
NOTE
If a broken DLP* unit is replaced with a new unit, cancel the license for the broken unit and make
sure to carry out new registration for the replaced unit. If the license for the broken unit is not
canceled, you will be charged a reception fee for both units.
* DLP: Down Link Processor (SATELLITE RADIO Module)
6-80
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Audio Control Switch
Operation
When the audio unit is turned on,
operation of the audio unit from the
steering wheel is possible.
NOTE
Because the audio unit will be turned off under
the following conditions, the switches will be
inoperable.
l When the ignition is turned off (LOCK).
l When the power button on the audio unit is
pressed and the audio unit is turned off.
l When the CD being played is ejected and
the audio unit is turned off.
With Bluetooth Hands-Free only/

Bluetooth Hands-Free and navigation
system
Use the talk button, pick-up button, and
hang-up button for navigation system
sound operation.
For details, refer to the separate manual
NAVIGATION SYSTEM Owner's
Manual.
Pick-up button
Hang-up button
Talk button
Without Bluetooth Hands-Free and

navigation system
NOTE
l
The talk button, pick-up button, and hangup button are operable with the audio unit
turned off.
Mazda has installed this system to prevent
distraction while driving the vehicle and
using audio controls on the dashboard.
Always make safe driving your first priority.
qAdjusting the Volume

To increase the volume, press up the
volume switch.
To decrease the volume, press down the
volume switch.
Some models.
Form No.8AS3-EA-09E
6-81
Interior Comfort
Audio System
navigation system
(Type B)
Press the mode switch (
) to change
the audio source (FM1 radio FM2
radio AM radio CD changer
SIRIUS1 SIRIUS2 SIRIUS3
AUX BT audio cyclical).
navigation system

system

system
qChanging the Source

(Type A)
Press the mode switch (
) to change
the audio source (FM1 radio FM2
radio AM radio CD player or CD
changer SIRIUS* AUX BT
audio cyclical).
* With the SIRIUS digital satellite radio,
the mode which was selected last is
displayed.
6-82
Form No.8AS3-EA-09E
Interior Comfort
Audio System
NOTE
CD, CD changer, SIRIUS digital satellite
radio, and BT audio modes cannot be selected
in the following cases:
SIRIUS digital satellite radio unit, or BT
audio unit is not equipped on the audio
system.
CD has not been inserted.
The AUX mode is locked out unless you
connect a commercially available portable
audio unit to the auxiliary jack. Connect a
portable audio unit or similar product on the
market to the auxiliary jack to listen to music
or audio over the vehicle's speakers. Change
the audio source to AUX mode (page 6-84).
qSeek Switch
navigation system

system
When listening to the radio or SIRIUS

digital satellite radio
Press the seek switch up or down. The
radio switches to the next/previous stored
station in the order that it was stored
(16).
Press the seek switch up or down for
about 2 seconds until a beep sound is
heard to seek all usable stations at a
higher or lower frequency whether
programmed or not.
When playing a CD or BT audio
Press up the seek switch to skip to the
next track.
Press down the seek switch to repeat the
current track.
Press and hold the seek switch in the up or
down position to continuously switch the
tracks up or down.
6-83
Form No.8AS3-EA-09E
Interior Comfort
Audio System
qMute Switch
Press the mute switch ( ) once to mute
audio, press it again to resume audio
output.
NOTE
If the ignition is turned off (LOCK) with the
audio muted, the mute will be canceled.
Therefore, when the engine is restarted, the
audio is not muted. To mute the audio again,
press the mute switch ( ).
AUX Mode (Auxiliary

input)
over the vehicle's speakers.
Auxiliary jack

navigation system
WARNING
Do not adjust the portable audio unit
or a similar product while driving the
vehicle:
Adjusting the portable audio unit or
a similar product while driving the
vehicle is dangerous as it could
distract your attention from the
vehicle operation which could lead to
a serious accident. Always adjust the
portable audio unit or a similar
product while the vehicle is stopped.
6-84
Some models.
Form No.8AS3-EA-09E
Interior Comfort
Audio System
CAUTION
Close the lid when the auxiliary
jack is not in use to prevent
foreign objects and liquids from
penetrating the auxiliary jack.
Depending on the portable audio
device, noise may occur when
using the device with it connected
to the accessory socket equipped
on the vehicle. (If noise occurs, do
not use the accessory socket.)
2. Pass the connection plug cord through

the cutout of the console and insert the
plug into the auxiliary jack.
Plug
NOTE
l
Before using the auxiliary jack, read the

manufacturer's instructions for the product
being connected.
Use a commercially-available, nonimpedance (3.5 ) stereo mini plug for
connecting the portable audio unit to the
auxiliary jack. Before using the auxiliary
jack, read the manufacture's instructions
for connecting a portable audio unit to the
auxiliary jack.
To prevent discharging of the battery, do
not use the auxiliary input for long periods
with the engine off or idling.
Noise may occur depending on the product
connected to the auxiliary jack.
With regard to connecting a portable audio
or similar device to a power source, use the
battery for the device, not the accessory
socket.
WARNING
Do not allow the connection plug cord
to get tangled with the parking brake
or the shift lever:
Allowing the plug cord to become
tangled with the parking brake or
the shift lever is dangerous as it
could interfere with driving, resulting
in an accident.
CAUTION
Do not place objects or apply force to
the auxiliary jack with the plug
connected.
NOTE
l
Connecting the auxiliary jack

1. Open the console lid.
Insert the plug to the auxiliary jack

securely.
Insert or remove the plug with the plug
perpendicular to the auxiliary jack hole.
Insert or remove the plug by holding its
base.
To listen to a portable audio unit

1. Switch the ignition to ACC or ON.
2. Press the power/volume dial to turn the
audio system on.
6-85
Form No.8AS3-EA-09E
Interior Comfort
Audio System
3. (Type A)
Press the AUX button (
) of the
audio unit or the mode switch (
)
of the audio control switches on the
steering wheel to change to the AUX
mode.
(Type B)
) of the
audio unit or the mode switch (
)
of the audio control switches on the
steering wheel to change to the AUX
mode.
Audio Unit
Audio Control
Switches
NOTE
l
Set the volume of the portable audio unit to

the maximum within the range that the
sound does not become distorted, then
adjust the volume using the power/volume
dial of the audio unit or the up/down switch
of the audio control switch.
Audio adjustments other than audio volume
can only be done using the portable audio
device.
If the connection plug is pulled out from the
auxiliary jack while in AUX mode, noise
may occur.
6-86
Form No.8AS3-EA-09E
Interior Comfort
Audio System
Safety Certification
This CD player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety performance standards of the U.S. Department of
Health and Human Services.
CAUTION
This CD player should not be adjusted or repaired by anyone except qualified
service personnel.
If servicing is required, contact an Authorized Mazda Dealer.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser exposure. Never operate the CD
player with the top case of the unit removed.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
NOTE
For CD player section:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
6-87
Form No.8AS3-EA-09E
Interior Comfort
Bluetooth Audio (Type A)

qWhat is Bluetooth Audio?
Bluetooth audio outline
By programming portable audio devices
equipped with the Bluetooth
communication function to the vehicle's
Bluetooth unit, you can listen to music or
audio recorded on these audio devices
from the vehicle's speakers. Bluetooth
audio devices do not need to be plugged
into the auxiliary jack.
After programming, operate the audio
system's control panel or the navigation
system to play/stop the music or audio.
CAUTION
Always program audio devices to
the Bluetooth audio system while
the vehicle is stopped.
Because only specified Bluetooth
audio devices can be used, consult
an Authorized Mazda Dealer when
purchasing or changing devices.
Bluetooth audio devices which
correspond to specified Bluetooth
versions and profiles can be
Bluetooth-connected to the
vehicle's Bluetooth unit, however,
even among these devices are ones
which cannot be Bluetoothconnected or have limited
functionality. Each device to be
used with the vehicle's Bluetooth
unit needs to be checked
individually for compatibility.
Consult an Authorized Mazda
Dealer concerning device
compatibility.
Phone: 800-430-0153
Web: www.MazdaUSA.com/
bluetooth
6-88
Some models.
Form No.8AS3-EA-09E
Applicable Bluetooth specification

Ver. 2.0 or higher
Audio profile
l A2DP (Advanced Audio Distribution
Profile) Ver. 1.0
l AVRCP (Audio/Video Remote Control
Profile) Ver. 1.0
A2DP is a profile which transmits only
audio to the Bluetooth unit. If your
Bluetooth audio device corresponds only
to A2DP, but not AVRCP, you cannot
operate it using the control panel of the
vehicle's audio or navigation systems. In
this case, the Bluetooth audio device can
be operated by controlling the device
itself, the same as when a portable audio
system without the Bluetooth
communication function is connected to
the AUX terminal.
Function
Playback
Pause
File (Track)
up/down
A2DP
No
No
A2DPAVRCP
Yes
Yes
No
Yes
Yes: Available
No: Not available
Bluetooth is the registered trademark of

Bluetooth SIG. Inc.
Interior Comfort

NOTE
l
It may not be possible to play a Bluetooth

audio device if it is placed anywhere
transmission is compromised, such as
inside a metal container or the trunk. Move
the Bluetooth audio device to a location
where transmission is possible.
Battery consumption of Bluetooth audio
devices is higher while Bluetoothconnected.
If a non-Bluetooth device is to be used, a
commercially-available Bluetooth adapter
is required. When playing an audio device
with a Bluetooth adapter installed,
programming of the audio device may not
be possible or audio may not be heard from
the vehicle speakers if the connection of the
adapter and the device is poor. If this
happens, check if the Bluetooth adapter is
properly connected.
qBluetooth Audio Preparation

Bluetooth audio device set-up
Bluetooth audio programming, changes,
deletions, and display of programmed
device information can be performed.
1. The mode changes as follows each
time the audio control dial is pressed.
Select BT SETUP.
*1
*1
*1
*1 *2
6-89
Form No.8AS3-EA-09E
Interior Comfort

Display

PAIR DEVICE
*1
*1
LINK CHANGE
PAIR DELETE
DEVICE INFO
Mode
Function
Bluetooth
Pairing
audio device
program mode
programming
Changing link
Link change
to Bluetooth
mode
audio device
Deleting link
Pairing
to Bluetooth
deletion mode
audio device
Displaying
Device
vehicle's
information
Bluetooth unit
display mode
information
3. Press the audio control dial to

determine the mode.
*1
*1
*1*2
*1 Depending on the mode selected, the

indication changes.
*2 Depending on the model, this function
2. Turn the audio control dial and select a
desired mode.
6-90
Form No.8AS3-EA-09E
Bluetooth audio device programming

Any Bluetooth audio device must be
programmed to the vehicle's Bluetooth
unit before it can be listened to over the
vehicle's speakers.
A maximum of seven devices including
Bluetooth audio devices and hands-free
mobile phones can be programmed to one
vehicle.
Interior Comfort

NOTE
l
Always perform Bluetooth audio device

programming while the vehicle is stopped.
If a Bluetooth device has already been
programmed to the vehicle as a hands-free
mobile phone, it does not need to be
programmed again when using the device
as a Bluetooth audio device. Conversely, it
does not need to be programmed again as a
hands-free mobile phone if it has already
been programmed as a Bluetooth audio
device.
Look around to be sure other likely
Bluetooth audio devices are not in range
when you start to program. If in doubt,
move your car to another location. The
transmission range of a Bluetooth audio
device is about 10 m (32 ft). Therefore, if
there is another Bluetooth audio device
within a 10 m (32 ft) radius of the vehicle,
the device may be identified and
programmed instead.
Device registration can also be done using
voice recognition (page 6-109).
Concerning the operation of a Bluetooth

audio device itself, refer to its instruction
manual.
Some Bluetooth audio devices have PIN
codes (four digits). Refer to the audio
device's instruction manual because the
programming procedure differs depending
on whether it has a PIN code or not.
Programming a Bluetooth audio device
which has a PIN code (4 digits)
1. Using the audio control dial, select the
pairing program mode
PAIR DEVICE in the BT SETUP
mode. (Refer to
Bluetooth audio device set-up for
details.)

determine the mode.
After ENTER PIN is displayed on
the information display for three
seconds, PIN 0000 is displayed and
the PIN code can be input.
3. Input the PIN code of your Bluetooth
audio device by pressing channel
preset buttons 1 to 4 while PIN 0000
is displayed.
Press channel preset button 1 to input
the first digit, 2 for the second, 3 for
the third, and 4 for the forth. For
example, if the PIN code were 4213,
press channel preset button 1 four
times (1, 2, 3, 4), button 2 twice (1, 2),
button 3 once (1), and button 4 three
times (1, 2, 3). If the PIN 0000
display disappears before finishing the
PIN code input, repeat the procedure
from Step 1.
NOTE
Some devices accept only a particular pairing
code (Usually, 0000 or 1234).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and try
those numbers if necessary.
4. Press the audio control dial while the

input PIN code is displayed.
PAIRING flashes on the display.
5. Operate the Bluetooth audio device and
set it to the program mode while
PAIRING is flashing.
6. When the programming is completed,
and PAIR SUCCESS are
displayed after about 10-30 seconds,
after which PAIR SUCCESS
continues to be displayed for three
seconds, and then the unit returns to the
normal display.
6-91
Form No.8AS3-EA-09E
Interior Comfort

NOTE
l
Some Bluetooth audio devices need a

certain amount of time before the
symbol is displayed.
If the programming failed, Err flashes
for three seconds then it returns to the
normal display.
Programming cannot be performed while
the vehicle is moving. If you attempt to
perform programming while the vehicle is
moving, PAIR DISABLE is displayed and
it returns to the normal display.
If seven Bluetooth audio devices have
already been programmed to the vehicle,
programming cannot be performed and
MEMORY FULL is displayed. Delete
one programmed device to program
another one.
6. When the programming is completed,

and PAIR SUCCESS are
displayed after about 10-30 seconds,
after which PAIR SUCCESS
continues to be displayed for three
seconds, and then the unit returns to the
normal display.
NOTE
l

which does not have a PIN code (4
digits)
pairing program mode
PAIR DEVICE in the BT SETUP
mode. (Refer to
Bluetooth audio set up for details.)
determine the mode.
After ENTER PIN is displayed on
the information display for three
seconds, PIN 0000 is displayed and
the PIN code can be input.
3. Press the audio control dial while
PIN 0000 is displayed.
PAIRING flashes on the display.
PAIRING is flashing.
5. As the Bluetooth audio device requires
a PIN code, input 0000.
6-92
Form No.8AS3-EA-09E
If pairing cannot be completed, try 1234

instead. Refer to the owner's manual of
your mobile device for the right PIN code.
If the programming failed, Err flashes
for three seconds then it returns to the
normal display.
moving, PAIR DISABLE is displayed and
it returns to the normal display.
If seven Bluetooth audio devices have
already been programmed to the vehicle,
programming cannot be performed and
MEMORY FULL is displayed. Delete
one programmed device to program
another one.
Interior Comfort

Changing the link to a Bluetooth audio
device
If several devices have been programmed,
the Bluetooth unit links the device last
programmed. If you would like to link a
different programmed device, it is
necessary to change the link. The order of
device priority after the link has been
changed is maintained even when the
ignition is switched off (LOCK).
4. Turn the audio control dial to select the

name of the device you would like to
link.
Device name 1
Device name 2
Device name 3

link change mode LINK CHANGE
in the BT SETUP mode. (Refer to
details.)
Device name 4
Device name 5

determine the mode.
3. The name of the currently linked
Bluetooth audio device is displayed.
If no Bluetooth audio device is
currently linked, the name of the first
device among the programmed devices
is displayed.
Device name 6
Device name 7
5. Press the audio control dial to select the

device you would like to link.
The symbol disappears, and
PAIRING flashes in the display.
NOTE
When GO BACK is selected and the audio
control dial is pressed, the display returns to
LINK CHANGE.
6. If the link to the desired device is

successful, the symbol is
displayed again, together with
LINK CHANGED.
LINK CHANGED is displayed for
three seconds, then it returns to the
normal display.
6-93
Form No.8AS3-EA-09E
Interior Comfort

NOTE
l

If a hands-free type mobile phone has been
the most recently programmed device, the
Bluetooth unit links this device. If you
would like to use a Bluetooth audio type
device which has been previously
programmed to the Bluetooth unit, the link
must be changed to this device.
If an error occurs while trying to link a
device, Err flashes in the display for
three seconds, and the display returns to
LINK CHANGE. If this occurs, check the
programming status of the Bluetooth audio
device and the location of the device in the
vehicle (not in the trunk or a metal-type
box), and then try the link operation again.
Device selection can also be done using
4. Rotate the audio control dial and select

the name of the programmed device
you would like to delete.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
How to confirm the device currently

linked
Switch to the link-change mode. (Refer to
device)
The device name displayed first is the
device which is currently linked.
NOTE
Deleting the link to a Bluetooth audio

device
5. If a selection other than GO BACK

is made and the audio control dial is
pressed, SURE ? NO is displayed.

pairing delete mode PAIR DELETE
in the BT SETUP mode. (Refer to
details.)
determine the mode.
3. The name of the first device among the
programmed devices is displayed.
6-94
Form No.8AS3-EA-09E
Only the names of programmed devices can be

displayed. If only one device is programmed,
only the name for this device is displayed.
6. Rotate the audio control dial clockwise

and switch the display to SURE ?
YES.
NOTE
The display changes as follows depending on
whether the audio control dial is rotated
clockwise or counterclockwise.
-Clockwise: SURE ? YES displayed
-Counterclockwise: SURE ? NO displayed
Interior Comfort

7. Press the audio control dial to delete
the selected device.
NOTE
4. Rotate the audio control dial to select

the information for the Bluetooth unit
which you would like to view.
Select GO BACK and press the audio

control dial to return to the PAIR DELETE
display.
Device name
8. PAIR DELETED is displayed for

three seconds after the deletion is
completed, and then it returns to the
normal display.
BT address
NOTE
If an error occurs while trying to delete the
programmed device, Err flashes in the
display for three seconds and the display
returns to LINK DELETE.
Bluetooth audio device information

display
pair device information display mode
DEVICE INFO in the BT SETUP
mode. (Refer to
details.)
determine the mode.
3. The name of the Bluetooth unit device
is displayed.
NOTE
When GO BACK is selected and the audio
control dial is pressed, the display returns to
DEVICE INFO.
qHow to Use the Bluetooth Audio

System
Switching to Bluetooth audio mode
To listen to music or voice audio recorded
to a Bluetooth audio device, switch to the
Bluetooth audio mode to operate the
audio device using the audio system or
navigation system control panels.
unit before it can be used. (Refer to
Bluetooth audio device programming)
2. Turn on the Bluetooth audio device's
power.
Make sure that the symbol is
displayed in the information display.
The symbol is not displayed if an
unprogrammed Bluetooth audio device
is being used or the vehicle's Bluetooth
unit has a malfunction.
6-95
Form No.8AS3-EA-09E
Interior Comfort

NOTE
Some Bluetooth audio devices need a certain
amount of time before the symbol is
displayed.
3. Press the AUX button to switch the

Bluetooth audio mode to BT.
4. The audio recorded to the Bluetooth
audio device begins playback.
NOTE
l
If the Bluetooth audio device does not begin

playback, press the Play/Pause button
).
(
If the mode is switched from Bluetooth
audio mode to another mode (radio mode),
audio playback from the Bluetooth audio
device stops.
If a call is received on a hands-free mobile
phone during playback from the Bluetooth
audio device, the playback is stopped.
Playback from the Bluetooth audio device
resumes after the call ends.
Playback
1. To listen to a Bluetooth audio device
over the vehicle's speaker system,
switch the mode to Bluetooth audio
mode. (Refer to
Switching to Bluetooth audio mode)
2. To stop playback, press the Play/Pause
button ( ).
3. Press the button again to resume
playback.
Selecting a file (track)
Short-press the track down button ( ):
Selects the beginning of the current file
(track).
Short-press the track up button ( ):
Selects the next file (track).
6-96
Form No.8AS3-EA-09E
NOTE
l
If the track down button ( ) is pressed

while the first file (track) in the folder is
displayed, the audio unit displays the last
file (track) in the folder.
Conversely, if the track up button ( ) is
pressed while the last file (track) in the
folder is displayed, the audio unit displays
the first file (track) in the folder.
Interior Comfort
Bluetooth Audio (Type B)

qWhat is Bluetooth Audio?
Bluetooth audio outline
By programming portable audio devices
equipped with the Bluetooth
communication function to the vehicle's
Bluetooth unit, you can listen to music or
audio recorded on these audio devices
from the vehicle's speakers. Bluetooth
audio devices do not need to be plugged
into the auxiliary jack.
After programming, operate the audio
system's control panel to play/stop the
music or audio.
CAUTION
Always program audio devices to
the Bluetooth audio system while
the vehicle is stopped.
Because only specified Bluetooth
audio devices can be used, consult
an Authorized Mazda Dealer when
purchasing or changing devices.
Bluetooth audio devices which
correspond to specified Bluetooth
versions and profiles can be
Bluetooth-connected to the
vehicle's Bluetooth unit, however,
even among these devices are ones
which cannot be Bluetoothconnected or have limited
functionality. Each device to be
used with the vehicle's Bluetooth
unit needs to be checked
individually for compatibility.
Consult an Authorized Mazda
Dealer concerning device
compatibility.
Phone: 800-430-0153
bluetooth

Ver. 2.0 or higher
Audio profile
A2DP (Advanced Audio Distribution
Profile) Ver. 1.0
Profile) Ver. 1.0/1.3
A2DP is a profile which transmits only
audio to the Bluetooth unit. If your
Bluetooth audio device corresponds only
to A2DP, but not AVRCP, you cannot
operate it using the control panel of the
vehicle's audio system. In this case, the
Bluetooth audio device can be operated
by controlling the device itself, the same
as when a portable audio system without
the Bluetooth communication function is
connected to the AUX terminal.
l
Function
Playback
Pause
File (Track)
up/down
Reverse
Fast-forward
Text display
A2DP
No
No
A2DPAVRCP
Ver. 1.3 or
Ver. 1.3
lower
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
Yes: Available
No: Not available
NOTE
l
The system may not operate normally

depending on the Bluetooth audio device.
To make sure that your Bluetooth audio
device is Ver. 1.0 or 1.3, refer to the
Owner's Manual for the Bluetooth audio
device.
Some models.
Form No.8AS3-EA-09E
6-97
Interior Comfort

Bluetooth audio device programming
unit before it can be listened to over the
vehicle's speakers.
Bluetooth audio devices and hands-free
mobile phones can be programmed to one
vehicle.
NOTE
l

Bluetooth SIG. Inc.
NOTE
l
It may not be possible to play a Bluetooth

audio device if it is placed in a location
where transmission is compromised, such
as inside a metal container or the trunk.
Move the Bluetooth audio device to a
location where transmission is possible.
The battery consumption of Bluetooth audio
devices is higher while Bluetoothconnected.
If a non-Bluetooth device is to be used, a
commercially-available Bluetooth adapter
is required. When playing an audio device
with a Bluetooth adapter installed,
programming of the audio device may not
be possible or audio may not be heard from
the vehicle speakers if the connection of the
adapter and the device is poor. If this
happens, check whether the Bluetooth
adapter is properly connected.
qBluetooth Audio Preparation

Bluetooth audio device set-up
Bluetooth audio programming, changes,
deletions, and display of programmed
device information can be performed.
6-98
Form No.8AS3-EA-09E
Always perform Bluetooth audio device

programming while the vehicle is stopped.
moving, Pairing prohibited is displayed.
A total of seven devices can be programmed
to one vehicle. If you require an additional
device to be programmed to a vehicle with
seven devices already programmed, delete
one of the programmed devices before
programming the latest one.
programmed to the vehicle as a hands-free
mobile phone, it does not need to be
as a Bluetooth audio device. Conversely, it
does not need to be programmed again as a
hands-free mobile phone if it has already
been programmed as a Bluetooth audio
device.
Look around to be sure other likely
Bluetooth audio devices are not in range
when you start to program. If in doubt,
move your car to another location. The
transmission range of a Bluetooth audio
device is about 10 m (32 ft). Therefore, if
there is another Bluetooth audio device
within a 10 m (32 ft) radius of the vehicle,
the device may be identified and
programmed instead.
Interior Comfort

Concerning the operation of a Bluetooth
audio device itself, refer to its instruction
manual.
Some Bluetooth audio devices have PIN
codes (four digits). Refer to the audio
device's instruction manual because the
programming procedure differs depending
on whether it has a PIN code or not.

Pairing is in progress. Please start
pairing procedure on your Bluetooth
device. Use the PIN xxxx. is
displayed.

display the pairing program screen.
7. When the pairing programming is

completed, a symbol and
Pairing complete are displayed, and
then the display returns to the normal
display.
If an error occurs during program
pairing, Error is displayed and the
display returns to the pairing program
screen.
3. Enter Pin:0000 and

Rotate/Press TUNE dial to change
code. Select OK when complete. are
displayed for input of the PIN code.

displayed.

which has a PIN code (four digits)
Bluetooth audio setting menu screen.

the specified number for the Bluetooth
audio device and press the enter button
(
NOTE
Some devices accept only a particular pairing
code (Usually, 0000 or 1234).
owner's manual of your mobile device, and try
those numbers if necessary.

(
) to set the four digits and
display
device. Use the PIN xxxx..
NOTE

which does not have a PIN code (four
digits)
display the pairing program screen.
3. Enter Pin:0000 and
OK, and then press the enter button
(
display
device. Use the PIN 0000..
6-99
Form No.8AS3-EA-09E
Interior Comfort

device. Use the PIN 0000. is
displayed.
6. The Bluetooth audio device will
request input of a PIN code. Input
0000.
then it returns to the normal display.
screen.
NOTE
l

instead. Refer to the owner's manual of
your mobile device for the right PIN code.

device
6-100
Form No.8AS3-EA-09E
NOTE
l
If a hands-free type mobile phone has been

the most recently programmed device, the
Bluetooth unit links this device. If you
would like to use a Bluetooth audio type
device which has been previously
programmed to the Bluetooth unit, the link
must be changed to this device.
If the device name cannot be displayed,
... is added at the end to the part of the
title which can be displayed.
Changing the link to only a Bluetooth

audio device
link change screen and the current
pairing programming device name.
3. Press selection button 1, 2, 3, 4, 5, 6, or
7 to select the name of the device you
would like to change.
The symbol disappears, and the
device name and
Connection is in progress. are
displayed.
4. When the link change is completed, a
symbol and Link Changed are
displayed, and then it returns to the
normal display.
device, Error is displayed and the
display returns to the link change
screen.
Interior Comfort

NOTE
l

If a link change error occurs, check the
NOTE
l

If a link change error occurs, check the
Changing the link to a Bluetooth

Hands-Free and Bluetooth audio device
Deleting the link to a Bluetooth audio

device

NOTE

4. The device name and
Please Select Device are displayed.
5. Press selection button 3 to select
Audio. The symbol disappears,
and then Connection is in progress.
is displayed.
normal display.
If an error occurs while trying to
change the link, Error is displayed,
and then it returns to the link change
screen.
If the device name and Bluetooth address

cannot be displayed, ... is added at the end
to the part of the title which can be displayed.

pair link deletion screen and the current
would like to delete.
4. The link delete confirmation screen is
displayed, and then
Delete select device?, the device
name, and the Bluetooth address are
displayed.
5. Press selection button 1 to delete the
selected device.
NOTE
to the previous display.
) to return
6-101
Form No.8AS3-EA-09E
Interior Comfort

6. When the link deletion is completed,
Deleted is displayed, and then it
returns to the normal display.
If an error occurs while trying to delete
the link, Error is displayed, and then
it returns to the link deletion screen.
NOTE
If a device is deleted while it is being linked,
linking to other devices will not be possible.
Bluetooth audio device information

display
device information display screen.
If the device information is available,
the device name and Bluetooth address
are displayed, and then it returns to the
If the device information is not
available,
Failed to obtain device information.
is displayed, and then it returns to the
NOTE
qHow to Use the Bluetooth Audio

System
Switching to Bluetooth audio mode
To listen to music or voice audio recorded
to a Bluetooth audio device, switch to the
Bluetooth audio mode to operate the
audio device using the audio system
control panel.
unit before it can be used. (Refer to
Bluetooth audio device programming)
2. Turn on the Bluetooth audio device's
power.
Make sure that the symbol is
displayed in the audio unit screen.
The symbol is not displayed if an
unprogrammed Bluetooth audio device
is being used or the vehicle's Bluetooth
unit has a malfunction.
NOTE
displayed.
3. Press the AUX button (

) to
switch the Bluetooth audio mode.
4. The audio recorded to the Bluetooth
audio device begins playback.
6-102
Form No.8AS3-EA-09E
Interior Comfort

NOTE
l

playback, press the Play/Pause button
).
(
If the mode is switched from Bluetooth
audio mode to another mode (radio mode),
audio playback from the Bluetooth audio
device stops.
If a call is received on a hands-free mobile
phone during playback from the Bluetooth
audio device, the playback is stopped.
Playback from the Bluetooth audio device
resumes after the call ends.
Playback
) to switch
the Bluetooth audio mode and start
playback.
File (track) search

File (track) up
Press the track up button (
file dial clockwise.
) or turn the
File (track) down

Press the track down button ( ) or turn
the file dial counterclockwise.
Fast-forward/Reverse (only AVRCP
Ver. 1.3)
Fast-forward
Press and hold the track up button (
).
Reverse
Press and hold the track down button
( ).
NOTE
).
playback, press the Play/Pause button (
The current device is lower than

AVRCP Ver. 1.3
Bluetooth-Audio is displayed.
The current device is AVRCP Ver. 1.3
Bluetooth-Audio, track number, elapsed
time, album name, artist name, and song
name are displayed.
NOTE
l
If the entire title cannot be displayed, ...

is added at the end to the part of the title
which can be displayed.
If title information is not available,
NO TITLE is displayed.
If there are any undisplayable characters in
the title, - - - - - - - - is displayed.
Pause
Press the button again to resume
playback.
6-103
Form No.8AS3-EA-09E
Interior Comfort
Bluetooth Hands-Free (Voice Recognition)

Bluetooth Hands-Free
qWhat is Bluetooth Hands-Free?
Bluetooth Hands-Free Outline
By connecting a Bluetooth equipped
device (Mobile phone) to the hands-free
unit equipped on the vehicle, making and
receiving calls are possible using the talk
button, pick-up button and hang-up button
located on the steering wheel, and saying
the voice commands.
WARNING
Perform phonebook registration related
operations while the vehicle is parked:
Performing phonebook registration
while driving the vehicle could be a
distraction to your driving and result
in an accident. In addition, a mistake
in performing the phonebook
operation could result in the loss of
important data.
Bluetooth equipped device (Mobile
phone)
A Bluetooth equipped device (Mobile
phone) communicates with the hands-free
unit equipped on the vehicle using radio
transmission (Bluetooth).
For example, if the device (Mobile phone)
is placed in a coat pocket, the phone calls
can be made through your mobile service
without taking out and handling the
device (Mobile phone).
6-104
Some models.
Form No.8AS3-EA-09E
CAUTION
The types of devices (Mobile phone)
which can be connected to the
hands-free unit are limited, so before
purchasing or changing your device
(Mobile phone) model, consult
Mazda Bluetooth Hands-Free
Customer Service or visit
www.MazdaUSA.com/bluetooth for a
complete list of compatible phones.
Devices (Mobile phone) which can be
connected to the hands-free system
need to be compliant with Bluetooth
specifications and the appropriate
profile, however, even among these
Bluetooth devices (Mobile phone) are
some which will not connect with
your Mazda or will have limited
function. Therefore, consult Mazda
Bluetooth Hands-Free Customer
Service for information regarding
device (Mobile phone) compatibility:
Phone: 800-430-0153
bluetooth
Ver. 2.0 or higher
Response profile
l HFP (Hands Free Profile) Ver. 1.5
l DUN (Dial-up Networking Profile)
Ver. 1.1
l PBAP (Phone Book Access Profile)
Ver. 1.0
Profile) Ver. 1.0
Interior Comfort

l
OPP (Object Push Profile) Ver. 1.1

Bluetooth SIG. Inc.
Talk button, Pick-Up button and HangUp button

Basic functions of Bluetooth Hands-Free
can be used for such things as making
calls or hanging up using the talk button,
pick-up button and hang-up button on the
steering wheel.
Pick-up button
Hang-up button
Talk button
NOTE
l
The Bluetooth Hands-Free system is

operable several seconds after the ignition
is switched to ACC or ON (requires less
than 15 seconds).
If the ignition is switched off (LOCK)
during a hands-free call, the line is
transferred to the device (Mobile phone)
automatically.
If the device (Mobile phone) is in a location
where radio reception is difficult such as a
metal container or in the trunk, the call may
not be connected using Bluetooth. If
communication is not possible, change the
location of the device (Mobile phone).
qComponent Parts
Talk button operations

A short press or a long press of the talk
button is used to operate the system as
follows:
l Short press (Press the button less than
0.7 sec.)
l Long press (Press the button 0.7 sec. or
more.)
Bluetooth Hands-Free consists of the

following items:
l Talk button
l Pick-up button
l Hang-up button
l Information display (Type A/
Navigation system)
l Microphone
l Audio unit/Navigation system
6-105
Form No.8AS3-EA-09E
Interior Comfort

Information display (Type A/
Navigation system)
When available, the information display
shows telephone numbers, Bluetooth
Hands-Free messages, and operation
status.
Bluetooth phone connected
qVoice
To prevent the deterioration in voice
recognition rate and voice quality, the
following points must be observed:
l It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
l Close the windows and/or the
moonroof to reduce loud noises from
outside the vehicle, or turn down the
airflow of the climate control system
while Bluetooth Hands-Free is being
used. Voice recognition may not
function correctly or voice quality may
deteriorate under the following
conditions.
A passenger is speaking.
Driving with the window and/or the
moonroof open.
Driving on bumpy roads.
Noise outside of the vehicle is loud.
(Construction sites, inside tunnels,
excess oncoming traffic, or heavy
rain.)
Operation noise from turn signals,
wipers, or the horn is heard.
A/C airflow is strong or wind is
blowing on the microphone.
There is noise coming from cargo
loaded in the vehicle.
l Voice commands may not be
recognized depending on the voice. If
the voice commands are not recognized
correctly, repeat the commands in a
louder voice, at a natural pace, as if
speaking to another person.
l Dialects or different wording other than
hands-free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
l
Microphone
The microphone is used for speaking
voice commands or exchanging
conversation.
Microphone
l
l
Audio unit/Navigation system

The audio unit or navigation system is
used for adjusting the volume.
6-106
Form No.8AS3-EA-09E
Interior Comfort

NOTE
If the voice recognition performance is not
satisfactory, refer to Voice Recognition
Learning Function (Speaker Enrollment)
(page 6-126).
Please be aware that the voice recognition

may error despite following the above
points.
qFunction Restrictions While

Using Bluetooth Hands-Free
Some functions are limited while
Bluetooth Hands-Free is being used. They
include:
l Beep sound and voice guidance related
to the audio unit and navigation system
are not heard.
l Beep sound related to the A/C
operation is not heard.
l The navigation system's voice
recognition command does not
function.
qHow to Use This Section

Descriptions in the text are as follows:
Say: Voice commands to be spoken by
you.
Prompt: Voice guidance output from the
speaker.
NOTE
Say voice commands after the beep sound
[Beep] is heard.
Example)
Say: [Beep] Dial
Prompt: Number, please
Say: [Beep] XXXXXXXXXXX (Ex.
555-1234) (Telephone number)
Bluetooth Hands-Free Activation

Method
Press the pick-up button (with/without
navigation system) or talk button with a
short press (without navigation system) or
a long press (with navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] Telephone or
Phone.
The hands-free system is activated.

Functions of the hands-free telephone,
such as making and receiving calls, can be
used after the activation. (For details on
the telephone functions, refer to Basic
Bluetooth Hands-Free Operation or
System.)
NOTE
For vehicles with a navigation system, the
system operates by speaking the voice
recognition command of the navigation system
after pressing the talk button with a short
press. For voice recognition details with the
navigation system, refer to the separate
NAVIGATION SYSTEM Owner's Manual.
Tutorial
The tutorial explains how to use
Bluetooth Hands-Free.
To activate the tutorial, do the following:
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
6-107
Form No.8AS3-EA-09E
Interior Comfort

NOTE
Voice guidance interrupt operation

can also press the talk button with a short
press and say: [Beep] Telephone or
Phone.
Voice guidance can be stopped by

pressing the talk button with a short press
while it is being heard. A new voice input
command can then be spoken by the user.
Press the talk button with a short press.
2. Say: [Beep] Tutorial

3. Follow the prompts to receive the
appropriate voice guidance
instructions.
qUseful Commands at Anytime,

Convenient Operations
Help function use
The help function informs the user of all
the available voice commands under the
current conditions.
1. Press the talk button with a short press.
2. Say: [Beep] Help
3. Follow the prompts to receive the
appropriate voice guidance
instructions.
Cancel
The Bluetooth Hands-Free system
transitions to idling status if the following
operation is performed while the system is
activating.
Press the hang-up button, or the talk
button with a long press.
Returning to previous operation (Type
B/Navigation system)
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep] Go Back
6-108
Form No.8AS3-EA-09E
Voice recognition mode cancel

If you want to cancel the voice
recognition mode during a call, the voice
recognition mode can be canceled without
having to end the call.
Press the talk button with a long press.
Interior Comfort

Basic Bluetooth HandsFree Operation
qBluetooth Hands-Free Preparation
Language setting
The available languages are English,
Spanish, and Canadian French. If the
language setting is changed, all of the
voice guidance and voice input
commands are done in the selected
language.
NOTE
l
If the language setting is changed, device

registration is maintained.
Phonebook records are not cleared, but
each language has a separate phonebook.
Therefore, entries created in one language
will need to be re-entered in the phonebook
of the new language.
Do these steps before you start driving.
These less used functions are too
distracting to undertake while driving until
you are fully familiar with the system.
Method 1
navigation system).
NOTE
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
Telephone or Phone.
2. Say: [Beep] Setup

3. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Language

5. Prompt: Select a language: English,
French, or Spanish.
6. Say: [Beep] French (Speak the
desired language: English, French
or Spanish)
NOTE
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
7. Prompt: French (Desired language)

selected. Is this correct?
8. Say: [Beep] Yes
9. Prompt: French (Desired language)
selected, returning to main menu
(Spoken in the newly selected
language).
Method 2
navigation system).
NOTE
Telephone or Phone.
2. Say: [Beep] French (Say the desired

language: English, French, or
Spanish.) (Change the desired
language by saying the language
name.)
NOTE
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
6-109
Form No.8AS3-EA-09E
Interior Comfort

3. Prompt: Would you like to change
the language to French (Desired
language) ?
1. Activate the Bluetooth application of

the device.
4. Say: [Beep] Yes
For the operation of the device, refer to its

instruction manual.
5. Prompt: Please wait. Switching to

French phonebook. French selected,
returning to main menu (Spoken in
the newly selected language).
Device programming (Pairing)
To use Bluetooth Hands-Free, the device
equipped with Bluetooth has to be
programmed to the hands-free unit using
the following procedure.
hands-free mobile phones and Bluetooth
audio devices can be programmed to one
vehicle.
NOTE
l
A device can be programmed only when the

vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving pair up your device before you start
driving. Park the car in a safe place before
programming.
programmed to the vehicle as a Bluetooth
audio device, it does not need to be
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
a Bluetooth audio device if it has already
been programmed as a hands-free mobile
phone.
Since the communication range of a
Bluetooth equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
6-110
Form No.8AS3-EA-09E
NOTE

navigation system).
NOTE
Telephone or Phone.

5. Say: [Beep] Pairing options
Pair, edit, delete, or list.
7. Say: [Beep] Pair
8. Prompt: Please say a 4-digit pairing
code.
9. Say: [Beep] XXXX (Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
l
Some devices accept only a particular

pairing code (Usually, 0000 or 1234).
owner's manual of your mobile device, and
try those numbers if necessary.
Record the code as it will be used to
program your device in Step 16.
Interior Comfort

10. Prompt: Pairing code XXXX (4digit number). Is this correct?
11. Say: [Beep] Yes or No
12. If Yes, go to Step 13.
If No, the procedure returns to Step
8.
13. Prompt: Start pairing procedure on
the device. See the device manual for
instructions.
14. Using the device, perform a search
for the Bluetooth device (Peripheral
device).
After a device is registered, the system

automatically identifies the device. By
activating Bluetooth Hands-Free again, or
by activating Bluetooth Hands-Free first
after switching the ignition from off
(LOCK) to ACC, the system reads out a
voice guidance, XXXXXX - - - (Ex.
Stan's device) (Device tag) is
connected.
NOTE
l
NOTE
For the operation of the device, refer to its
instruction manual.
l
15. Select Mazda from the device list

searched by the device.
16. Input the 4-digit pairing code set in
Step 9 to the device.
17. Prompt: Please say the name of the
device after the beep.
18. Say: [Beep] XXXX - - - (Speak a
device tag, an arbitrary name for
the device.)
Example: Stan's device.
NOTE
Speak a programmed device tag within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar device tag.
19. Prompt: Adding XXXXXX - - (Ex. Stan's device) (Device tag). Is

this correct?
20. Say: [Beep] Yes
21. Prompt: Pairing complete
Device registration can also be done by

operating the audio unit or panel buttons
on the navigation unit. Refer to Bluetooth
Audio Preparation (page 6-89)(For audio
unit) or the separate manual
NAVIGATION SYSTEM Owner's Manual
(For navigation unit).
Depending on the device, the registration
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
qMaking a Call Using a Telephone

Number
NOTE
Practice this while parked until you are
confident you can do it while driving in a nontaxing road situation. If you are not completely
comfortable, make all calls from a safe
parking position, and move out only when fully
under control and you can devote your eyes
and mind to driving.
(Type A)
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] Dial
3. Prompt: Number, please
4. Say: [Beep] XXXXXXXXXXX (Ex.
6-111
Form No.8AS3-EA-09E
Interior Comfort

5. Prompt: Dialing XXXXXXXXXXX
(Ex. 555-1234) (Telephone number)
is this correct?
6. Say: [Beep] Yes or No.
7. When Yes is spoken, the procedure
proceeds to Step 8.
When No is spoken, the procedure
returns to Step 3.
8. Prompt: Dialing
(Type B/Navigation system)
navigation system).
NOTE
Telephone or Phone.
2. Say: [Beep] Dial

4. Say: [Beep] XXXXXXXXXXX
(Telephone number)
5. Prompt: XXXXXXXXXXX.
(Telephone number) After the beep,
continue to add numbers, or say GoBack to re-enter the last entered
numbers, or press the Pick-Up button
to execute dialing.
6-112
Form No.8AS3-EA-09E
6. (Dialing)
Press the pick-up button or say Dial,
then go to Step 7.
(Adding/inputting telephone
number)
Say, XXXX (desired telephone
number), then go back to Step 5.
(Telephone number correction)
After voice guidance outputs, Go
Back. The last entered numbers have
been removed. say, Go Back. Then
go back to Step 3.
7. Prompt: Dialing
NOTE
The Dial command and a telephone number
can be combined.
Ex. In Step 2, say, Dial 123-4567, then,
Steps 3 and 4 can be skipped.
qReceiving an Incoming Call

1. Prompt: Incoming call, press the
pickup button to answer.
2. To accept the call, press the pick-up
button.
To reject the call, press the hang-up
button.
qHanging Up a Call
Press the hang-up button during the call.
A beep sound will confirm that call is
ended.
Interior Comfort

qVolume Adjustment
The power/volume dial of the audio unit
or navigation system is used to adjust the
volume. Turn the dial to the right to
Convenient Use of the

Hands-Free System
qPhonebook Usage
Phonebook registration
Audio unit
Navigation system
Phone numbers can be registered to the

Bluetooth Hands-Free phonebook.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
(Type A)
1. Press the pick-up button or talk button
with a short press.
NOTE
l
The volume can also be adjusted using the

volume button on the steering wheel.
The music volume of the audio unit and the
navigation system cannot be adjusted while
Bluetooth Hands-Free is being used.
2. Say: [Beep] Phonebook

New entry, edit, list names, delete,
erase all or import contact.
4. Say: [Beep] New entry
5. Prompt: Name please.
6. Say: [Beep] XXXXX... (Ex. Mary's
phone) (Say a voice tag for the name
registered.)
7. Prompt: Adding XXXXX... (Ex.
Mary's phone) (Registered voice
tag). Is this correct?
8. Say: [Beep] Yes
9. Prompt: Home, Work, Mobile, or
Other?
10. Say: [Beep] Mobile (Say Home,
Work, Mobile, or Other, for the
desired location to be registered.)
11. Prompt: Mobile (Location to be
registered). Is this correct?
6-113
Form No.8AS3-EA-09E
Interior Comfort
13. Prompt: Number, please.

registered.)

(Ex. 555-1234) (Say the phone
number to be registered.)

Mary's phone) (Registered voice
tag). Is this correct?
12. Say: [Beep] Yes
15. Prompt: XXXXXXXXXXX (Ex.

555-1234) (Phone number
registration). Is this correct?
16. Say: [Beep] Yes
17. Prompt: Number saved. Would you
like to add another number for this
entry?
19. If Yes, an additional phone number
registration can be made for the same
entry.
If No, the procedure proceeds to
Step 20.
20. Prompt: Returning to main menu.
(Type B/Navigation system)
navigation system).
NOTE
Telephone or Phone.

4. Say: [Beep] New entry
6-114
Form No.8AS3-EA-09E
8. Say: [Beep] Yes

Other?
10. Say: [Beep] Mobile (Say Home,
Work, Mobile, or Other, for the
desired location to be registered.)
11. Prompt: Mobile (Location to be
registered). Is this correct?
12. Say: [Beep] Yes
13. Prompt: Number, please.
(Say the phone number to be
registered.)
15. Prompt: XXXXXXXXXXX
(Phone number registration). After the
beep, continue to add numbers, or say
Go-Back to re-enter the last entered
numbers, or press the Pick-Up button
to save the number.
16. (Registration)
Press the pick-up button or say
Enter, then go to Step 17.
(Adding/inputting telephone
number)
Say, XXXX (desired telephone
number), then go back to Step 15.
(Telephone number correction)
After voice guidance outputs, Go
Back. The last entered numbers have
been removed. say, Go Back.
Then go back to Step 13.
Interior Comfort

like to add another number for this
entry?
19. If Yes, an additional phone number
registration can be made for the same
entry.
If No, the system returns to idling
status.
Import contact
Phonebook data from your device (Mobile
phone) can be sent and registered to your
Bluetooth Hands-Free phonebook using
Bluetooth.
navigation system).
NOTE
Telephone or Phone.

4. Say: [Beep] Import contact
5. Prompt: Ready to receive a contact
from the phone.
6. Device (Mobile phone) operation:
Select one entry from the phonebook
and send it using Bluetooth.
7. Prompt: X (Number of locations

which include data) numbers have been
imported. What name would you like
to use for these numbers?
registered.)
Mary's phone) (Voice tag). Is this
correct?
10. Say: [Beep] Yes
like to import another contact?
12. Say: [Beep] Yes or No
13. If Yes, the procedure proceeds to
Step 5.
If No, the procedure proceeds to
Step 14.
Making calls using the phonebook
Telephone calls can be made by saying
the name of a person (voice tag) whose
phone number has been registered in
Bluetooth Hands-Free in advance.
For the phonebook setting method, refer
to (page 6-118).
navigation system).
NOTE
Telephone or Phone.
2. Say: [Beep] Call
6-115
Form No.8AS3-EA-09E
Interior Comfort

qEmergency Calls
4. Say: [Beep] XXXXX... (Ex. John's

phone) (Say a voice tag registered in
the phonebook.)
A call can be made to the emergency

phone number (911) using the voice input
command.
5. Prompt: Calling XXXXX... (Ex.

John's phone) XXXX (Ex. at
home). Is this correct? (Voice tag and
phone number location registered in
phonebook).

navigation system).
6. Say: [Beep] Yes
NOTE
7. Prompt: Dialing

Telephone or Phone.
NOTE
The Call command and the voice tag can be
combined.
Ex. In Step 2, say, Call John's phone, then,
Steps 3 and 4 can be skipped.
qRedialing Function
2. Say: [Beep] Emergency

3. Prompt: Dialing911, is this
correct?
4. Say: [Beep] Yes
Redialing the number of the person

previously dialed using the phone is
possible.
5. Prompt: Dialing

navigation system).
For incoming call refusal, refer to

Receiving an incoming call (page
6-112).
NOTE
Telephone or Phone.
2. Say: [Beep] Redial

3. Prompt: Dialing
qRefusing an Incoming Call
qMute
The microphone can be muted during a
call.
2. Say: [Beep] Mute
3. Prompt: Microphone muted
Canceling mute
2. Say: [Beep] Mute off
3. Prompt: Microphone unmuted
6-116
Form No.8AS3-EA-09E
Interior Comfort

qTransferring a Call
3. Prompt: Swapping calls
Transferring a call from Hands-Free to

a device (Mobile phone)
Communication between the hands-free
unit and a device (Mobile phone) is
canceled, and the line can be switched to a
standard call using a device (Mobile
phone).
NOTE
l
To refuse an incoming call, press the hangup button.

After receiving a new incoming call, the
previous call is placed on hold.
Switching calls
Switching back to the previous call can

also be done.
2. Say: [Beep] Transfer call
Method 1
3. Prompt: Transferred call to phone
1. Press the pick-up button.
Transferring a call from a device

(Mobile phone) to Hands-Free
2. Prompt: Swapping calls.
Communication between devices (Mobile

phone) can be switched to Bluetooth
Hands-Free.

2. Say: [Beep] Transfer call
Method 2
2. Say: [Beep] Swap call
3. Prompt: Swapping calls
Three-way call function
3. Prompt: Transferred call to Hands

Free system
qMulti-Call Functions
3. Prompt: Joining calls
Call waiting
Making a call using a telephone

number
A call can be interrupted to receive an

incoming call from a third party.
Call interrupt
2. Say: [Beep] Join call

2. Say: [Beep] Dial
A call can be switched to a new incoming

call.
Method 1
4. Say: [Beep] XXXXXXXXXXX (Ex.

1. Press the pick-up button.
Method 2
5. Prompt: Dialing XXXXXXXXXXX

(Ex. 555-1234) (Telephone number)
is this correct?
2. Prompt: Swapping calls.
2. Say: [Beep] Swap call
6-117
Form No.8AS3-EA-09E
Interior Comfort

7. When Yes is spoken, the procedure
proceeds to Step 8.
When No is spoken, the procedure
returns to Step 3.
8. Prompt: Dialing
2. Say: [Beep] Call
phone) (Say a voice tag registered in
the phonebook.)
5. Prompt: Calling XXXXX... (Ex.
John's phone) XXXX (Ex. at
home). Is this correct? (Voice tag and
phone number location registered in
phonebook).
6. Say: [Beep] Yes
7. Prompt: Dialing
Redialing function
2. Say: [Beep] Redial
3. Prompt: Dialing
Ending the current call
Press the hang-up button during the call.
qPhonebook Settings
Editing phonebook
The data registered to the Bluetooth
Hands-Free phonebook can be edited.
NOTE
6-118
Form No.8AS3-EA-09E

navigation system).
NOTE
Telephone or Phone.

4. Say: [Beep] Edit
entry you would like to edit or say,
List names.
phone) (Say the voice tag for the
registered name to be edited in the
phonebook.)
Other?
8. Say: [Beep] Home (Say the
registered location to be edited:
Home, Work, Mobile, or
Other).
9. Prompt: XXXXX... (Ex. Mary's
phone) (Registered voice tag) XXXX
(Ex. Home) (Registered location). Is
this correct?
10. Say: [Beep] Yes
11. Prompt: The current number is
XXXXXXXXXXX (Ex. 555-1234)
(Currently registered number). New
number, please.
Interior Comfort

NOTE
If there was no previous phone number
registered to a location (Ex. Work), the
prompt will only read out Number, please.

(Ex. 555-5678) (Say the new
phone number to be registered.)

entry you would like to delete or say,
List names.
phone) (Say the registered voice tag
to be deleted from the phonebook.)
13. Prompt: XXXXXXXXXXX (Ex.

555-5678) (The new phone number
to be registered). Is this correct?
7. Prompt: Deleting XXXXX... (Ex.

John's phone) (Registered voice tag)
Home (Registered location). Is this
correct?
14. Say: [Beep] Yes
8. Say: [Beep] Yes
15. Prompt: Number changed, returning

to main menu.
9. Prompt: XXXXX... (Ex. John's

phone) (Registered voice tag) Home
(Registered location) deleted, returning
to main menu.
Phonebook data deletion

Erasing individual phonebook data
Individual data registered to the Bluetooth
Hands-Free phonebook can be cleared.
NOTE

navigation system).
NOTE
Telephone or Phone.

4. Say: [Beep] Delete
Complete deletion of the phonebook

data
All data registered to the Bluetooth
Hands-Free phonebook can be erased.
NOTE

navigation system).
NOTE
Telephone or Phone.

6-119
Form No.8AS3-EA-09E
Interior Comfort

4. Say: [Beep] Erase all
5. Prompt: Are you sure you want to
erase everything from your Hands Free
system phonebook?
6. Say: [Beep] Yes
7. Prompt: You are about to delete
everything from your Hands Free
system phonebook. Do you want to
continue?
8. Say: [Beep] Yes
9. Prompt: Please wait, erasing the
Hands Free system phonebook.
10. Prompt: Hands-Free system
phonebook erased, returning to main
menu.
Read-out of names registered to the
Bluetooth Hands-Free phonebook
Bluetooth Hands-Free can read out the list
of names registered to its phonebook.
navigation system).
NOTE
Telephone or Phone.

4. Say: [Beep] List names
5. Prompt: XXXXX..., XXXXX...,

XXXXX... (Ex. John's phone, Mary's
phone, Bill's phone) (Voice guidance
reads out the voice tags registered to
the phonebook.)
Press the talk button with a short press
during the read-out at the desired name,
and then say one of the following voice
commands to execute it.
l Continue: Continues the list readout.
l Call: Calls the registered phonebook
data when the talk button is shortpressed.
l Edit: Edits the registered phonebook
data when the talk button is shortpressed.
l Delete: Deletes the registered
phonebook data when the talk button is
short-pressed.
l Previous: Returns to the previous
phonebook data in read-out when the
talk button is short-pressed.
6. Prompt: End of list, would you like
to start from the beginning?
7. Say: [Beep] No
qDTMF (Dual Tone MultiFrequency Signal) Transmission

This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
6-120
Form No.8AS3-EA-09E
Interior Comfort

2. Say: [Beep] XXXX... send (Say
DTMF code)
3. Prompt: Sending XXXX... (DTMF
code)
Hands-Free Setting
qDevice
Device registration
For the registration of a Bluetooth
equipped device to Bluetooth Hands-Free,
refer to Bluetooth Hands-Free
Preparation (page 6-109).
Registered device read-out
Bluetooth Hands-Free can read-out the
devices registered to its system.
NOTE

navigation system).
NOTE
Telephone or Phone.

6. Say: [Beep] List
6-121
Form No.8AS3-EA-09E
Interior Comfort

7. Prompt: XXXXX..., XXXXX...,
XXXXX... (Ex. Device A, device B,
device C) (The voice guidance reads
out the device tags registered to the
hands-free system.)
Press the talk button with a short press
during the read-out at the desired device,
and then say one of the following voice
commands to execute it.
l Select phone: Selects device (Mobile
phone) when the talk button is shortpressed.
l Select music player: Selects device
(Music player) when the talk button is
short-pressed.
l Edit: Edits device when the talk
button is short-pressed.
l Continue: Continues the list readout.
l Delete: Deletes the registered device
when the talk button is short-pressed.
l Previous: Returns to the previous
device in read-out when the talk button
is short-pressed.
8. Prompt: End of list, would you like
to start from the beginning?
9. Say: [Beep] No
Device selection
6-122
Form No.8AS3-EA-09E
Hands-free phone
navigation system).
NOTE
Telephone or Phone.

4. Say: [Beep] Select phone
5. Prompt: Please say 1 for XXXXX...
(Ex. device A), 2 for XXXXX... (Ex.
device B...)
6. Say: [Beep] X (Say the number for
the mobile phone to be connected.)
7. Prompt: XXXXX... (Ex. device B...)
(Registered device tag) selected, is this
correct?
8. Say: [Beep] Yes
(Device tag) will temporarily override
phone priorities, returning to main
menu.
Music player
navigation system).
Interior Comfort

Telephone or Phone.

navigation system).
NOTE
NOTE

4. Say: [Beep] Select music player

Telephone or Phone.

device B...)

6. Say: [Beep] X (Say the number for

the music player to be connected.)

(Registered device tag) selected, is this
correct?
8. Say: [Beep] Yes
(Device tag) selected.
NOTE
Device (Music player) selection can also be
done by operating the panel button (page
6-89).

NOTE
A registered device (Mobile phone) can be
deleted using the registration list.
6. Say: [Beep] Delete

device B...) (The device tag of the
registered device is read out by the
HFP.).
Registered device (Mobile phone)

deletion
8. Say: [Beep] X (Say the number of

the device to be deleted.)
Registered devices (Mobile phone) can be

deleted individually or collectively.
NOTE
NOTE
Say All to delete all devices (Mobile phone).
9. Prompt: Deleting XXXXX... (Ex.

device B...) (Registered device tag). Is
this correct?
10. Say: [Beep] Yes
11. Prompt: Deleted
6-123
Form No.8AS3-EA-09E
Interior Comfort

Registered device editing
qSecurity Setting

navigation system).
If a passcode is set, the system cannot be

activated unless the passcode is input.
NOTE
Telephone or Phone.

6. Say: [Beep] Edit
device B...), which device please?
(The device tag of the registered device
is read out by the HFP.)
8. Say: [Beep] X (Say the number of
the device to be edited.)
9. Prompt: New name please?
10. Say: [Beep] XXXXX... (Ex. device
C) (Speak a device tag, an
arbitrary name for the device.)
11. Prompt: XXXXX... (Ex. device C)
(Device tag), is this correct?
NOTE
Passcode setting
navigation system).
NOTE
Telephone or Phone.

3. Prompt:Select one of the following:
4. Say: [Beep] Passcode
5. Prompt: Passcode is disabled. Would
you like to enable it?
6. Say: [Beep] Yes
7. Prompt:Please say a 4-digit passcode.
Remember this passcode. It will be
required to use this system.
8. Say: [Beep] XXXX (Say a desired 4digit passcode, PCode.)
12. Say: [Beep] Yes
9. Prompt:Passcode XXXX (Passcode,

PCode). Is this correct?
13. Prompt: New name saved, returning

to main menu.
10. Say: [Beep] Yes
6-124
Form No.8AS3-EA-09E
Interior Comfort

11. Prompt:Passcode is enabled,
returning to main menu.
Using Bluetooth Hands-Free with a
passcode
navigation system).
NOTE
Telephone or Phone.
2. Prompt:Hands-Free system is locked.

State the passcode to continue.
3. Say: [Beep] XXXX (Say the set
passcode PCode.)
4. If the correct passcode is input, voice
guidance XXXXXX... (Ex. Mary's
device) (Device tag) is connected is
announced.
If the passcode is incorrect, voice
guidance XXXX (4-digit passcode,
Pcode) incorrect passcode, please try
again is announced.
Canceling the passcode
NOTE

navigation system).
NOTE
Telephone or Phone.

4. Say: [Beep] Passcode
5. Prompt:Passcode is enabled. Would
you like to disable it?
6. Say: [Beep] Yes
7. Prompt:Passcode is disabled,
returning to main menu.
Confirmation Prompts
The confirmation prompt confirms the
command content to the user before
advancing to the operation requested by
the user. When this function is turned on,
the system reads out the voice input
command previously received and
confirms whether the command is correct
before advancing to the command
execution.
When the confirmation prompt function is
turned on:
(Ex. Calling John's device. Is this
correct?)
When the confirmation prompt function is
turned off:
(Ex. Calling John's device.)
NOTE
If the confirmation prompt function is turned
off when making an emergency call, the system
reads out and confirms the command before
executing it.
6-125
Form No.8AS3-EA-09E
Interior Comfort

navigation system).
qVoice Recognition Learning

Function (Speaker Enrollment)
6. Say: [Beep] Yes
The voice recognition learning function

enables voice recognition appropriate to
the characteristics of the user's voice.
If the recognition of the voice input
commands to the system is not adequate,
this function can largely improve the
system's voice recognition of the user. If
your voice can be recognized sufficiently
without using this function, you may not
realize the added benefit of the function.
To register your voice, the voice input
command list must be read out. Read out
the list when the vehicle is parked.
Perform the registration in as quiet a place
as possible (page 6-106).
The registration must be performed
completely. The required time is a few
minutes. The user needs to be seated in
the driver's seat with the voice input
command list for voice recognition
learning open to the page indicated below.
7. Prompt:Confirmation prompts are

off/on, returning to main menu.
When voice recognition learning is

done for the first time
NOTE
Telephone or Phone.

3. Prompt:Select one of the following:
4. Say: [Beep] Confirmation prompts
5. Prompt:Confirmation prompts are
on/off. Would you like to turn
confirmation prompts off/on?

navigation system).
NOTE
Telephone or Phone.
2. Say: [Beep] Voice training
6-126
Form No.8AS3-EA-09E
Interior Comfort

3. Prompt: This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hangup button to cancel at
any time.
5. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. Please read
phrase 1)
6. Say: [Beep] 0123456789 (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
7. Prompt: Speaker enrollment is
complete, returning to main menu.
NOTE
If an error occurred in the voice recognition
learning, re-learning can be done by pressing
the talk button with a short press.
Voice recognition re-learning

If voice recognition learning has already
been done.
navigation system).
NOTE
Telephone or Phone.
3. Prompt: Enrollment is enabled/

disabled. Would you like to disable/
enable or retrain?
4. Say: [Beep] Retrain
5. Prompt: This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hangup button to cancel at
any time.
7. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. Please read
phrase 1)
8. Say: [Beep] 0123456789 (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
9. Prompt: Speaker enrollment is
complete, returning to main menu.
NOTE
If an error occurred in the voice recognition
learning, re-learning can be done by pressing
the talk button with a short press.
Voice input command list for voice

recognition learning
When reading out, the following points
must be observed:
l Read out the numbers one at a time
correctly and naturally.
6-127
Form No.8AS3-EA-09E
Interior Comfort

(For example, 1234 must be read out
one, two, three, four, not twelve, thirty
four.)
l Do not read out parentheses. ( and
hyphens - are used for separating
numbers in a phone number.
Ex.
(888) 555-1212 must be spoken Eight,
eight, eight, five, five, five, one, two, one,
two.
Phrase
1
2
3
4
5
6
7
8
Command
0123456789
(888) 555-1212
Call
Dial
Setup
Cancel
Continue
Help
NOTE
l
The applicable phrase appears in the

display.
After user voice registration is completed,
voice guidance Speaker enrollment is
complete, returning to main menu is
announced.
Voice recognition learning on/off

navigation system).
NOTE
Telephone or Phone.
6-128
Form No.8AS3-EA-09E
3. Prompt: Enrollment is enabled/

disabled. Would you like to disable/
enable or retrain?
4. Say: [Beep] Disable or Enable
5. When Disable is spoken, the voice
recognition learning is turned off.
When Enable is spoken, the voice
recognition learning is turned on.
6. Prompt: Speaker Enrollment is
disabled/enabled, returning to main
menu.
Interior Comfort

When Bluetooth HandsFree Cannot be Used
Bluetooth Hands-Free cannot be used
under the following conditions:
l The device is outside of the
communication area.
l The device has a malfunction.
l The device is not connected to the
hands-free unit equipped on the
vehicle.
l The device's battery is weak.
l The device is turned off.
l The device is placed where radio
reception is difficult.
l The ignition is switched off (LOCK).
FCC ID: CB2MBLUEC07 IC:279BMBLUEC07
This device complies with Part 15 of the
FCC Rules and with RSS-210 of Industry
following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any
operation.
WARNING
equipment.
The term IC: before the radio
certification number only signifies that
Industry Canada technical specifications
were met.
The antenna used for this transmitter must
not be co-located or operating in
conjunction with any other antenna or
transmitter. End-users and installers must
be provided with installation instructions
and transmitter operating conditions for
satisfying RF exposure compliance.
6-129
Form No.8AS3-EA-09E
Interior Comfort

Mazda Bluetooth HandsFree Customer Service
For toll-free Bluetooth Hands-Free
customer service call 800-430-0153 or go
to www.MazdaUSA.com/bluetooth for
assistance.
6-130
Form No.8AS3-EA-09E
Interior Comfort
Bluetooth Hands-Free (Panel Operation)

qWhat is Bluetooth Hands-Free?
Bluetooth Hands-Free Outline
By connecting a Bluetooth equipped
device (Mobile phone) to the hands-free
unit equipped on the vehicle, making and
receiving calls are possible using the
audio unit, and the pick-up and hang-up
buttons located on the steering wheel.
WARNING
Perform phonebook registration related
operations while the vehicle is parked:
Performing phonebook registration
while driving the vehicle could be a
distraction to your driving and result
in an accident. In addition, a mistake
in performing the phonebook
operation could result in the loss of
important data.
Bluetooth equipped device (Mobile
phone)
A Bluetooth equipped device (Mobile
phone) communicates with the hands-free
unit equipped on the vehicle using radio
transmission (Bluetooth).
For example, if the device (Mobile phone)
is placed in a coat pocket, the phone calls
can be made through your mobile service
without taking out and handling the
device (Mobile phone).
CAUTION
The types of devices (Mobile phone)
which can be connected to the
hands-free unit are limited, so before
purchasing or changing your device
(Mobile phone) model, consult
Customer Service or visit
www.MazdaUSA.com/bluetooth for a
complete list of compatible phones.
Devices (Mobile phone) which can be
connected to the hands-free system
need to be compliant with Bluetooth
specifications and the appropriate
profile, however, even among these
Bluetooth devices (Mobile phone) are
some which will not connect with
your Mazda or will have limited
function. Therefore, consult Mazda
Bluetooth Hands-Free Customer
Service for information regarding
device (Mobile phone) compatibility:
Phone: 800-430-0153
bluetooth
Ver. 2.0 or higher
Response profile
l HFP (Hands Free Profile) Ver. 1.5
l DUN (Dial-up Networking Profile)
Ver. 1.1
l PBAP (Phone Book Access Profile)
Ver. 1.0
Profile) Ver. 1.0
Some models.
Form No.8AS3-EA-09E
6-131
Interior Comfort

l
OPP (Object Push Profile) Ver. 1.1
Pick-up button and Hang-up button

Basic functions of Bluetooth Hands-Free
can be used for such things as making
calls or hanging up using the pick-up
button and hang-up button on the steering
wheel.
qHow to Use This Section

Bluetooth SIG. Inc.
NOTE
l
The Bluetooth Hands-Free system is

operable several seconds after the ignition
is switched to ACC or ON (requires less
than 15 seconds).
If the ignition is switched off (LOCK)
during a hands-free call, the line is
transferred to the device (Mobile phone)
automatically.
If the device (Mobile phone) is in a location
where radio reception is difficult such as a
metal container or in the trunk, the call may
not be connected using Bluetooth. If
communication is not possible, change the
location of the device (Mobile phone).
qComponent Parts
Bluetooth Hands-Free consists of the
following items:
l Audio unit
l Pick-up button
l Hang-up button
Audio unit
The audio unit can be used for Bluetooth
Hands-Free activation, making calls,
hanging up, device programming, device
selection, device deletion, device
information display, import contact, and
volume adjustment.
6-132
Form No.8AS3-EA-09E
Bluetooth Hands-Free activation

method
Press the phone button.
The hands-free system is activated.
Functions of the hands-free telephone,
such as making and receiving calls, can be
used after the activation. (For details on
the telephone functions, refer to
Basic Bluetooth Hands-Free Operation
or
System.)
Interior Comfort

Basic Bluetooth HandsFree Operation
NOTE
l
qBluetooth Hands-Free Preparation

Device programming (Pairing)
To use Bluetooth Hands-Free, the device
equipped with Bluetooth has to be
programmed to the hands-free unit using
the following procedure.
hands-free mobile phones and Bluetooth
audio devices can be programmed to one
vehicle.
A device can be programmed only when the

vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving pair up your device before you start
driving. Park the car in a safe place before
programming.
A total of seven devices can be programmed
to one vehicle. If you require an additional
device to be programmed to a vehicle with
seven devices already programmed, delete
one of the programmed devices before
programming the latest one.
programmed to the vehicle as a Bluetooth
audio device, it does not need to be
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
a Bluetooth audio device if it has already
been programmed as a hands-free mobile
phone.
Since the communication range of a
Bluetooth equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
Device registration can also be done by
operating the audio unit. Refer to
Bluetooth Audio Preparation (page
6-98).
Depending on the device, the registration
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
6-133
Form No.8AS3-EA-09E
Interior Comfort

Programming a Bluetooth Hands-Free
device which has a PIN code (four
digits)
Bluetooth Hands-Free setting menu
screen.
pairing program screen.
3. Enter Pin: 0000 and
the specified number for the Bluetooth
Hands-Free device and press the enter
button (
NOTE
l
Some devices accept only a particular

pairing code (Usually, 0000 or 1234).
owner's manual of your mobile device, and
try those numbers if necessary.

(
display
device. Use the PIN xxxx..
6. Operate the Bluetooth Hands-Free
device while
device. Use the PIN xxxx. is
displayed and set it to the program
mode.
6-134
Form No.8AS3-EA-09E

display.
screen.
Programming a Bluetooth Hands-Free
device which does not have a PIN code
(four digits)
screen.
pairing program screen.
3. Enter Pin: 0000 and
OK, and then press the enter button
(
display
device. Use the PIN 0000..
5. Operate the Bluetooth Hands-Free
device while
device. Use the PIN 0000. is
displayed and set it to the program
mode.
6. The Bluetooth Hands-Free device will
request input of a PIN code. Input
0000.
Interior Comfort

display.
screen.
qHanging Up a Call
NOTE
Increasing volume
Turn the power/volume dial clockwise.

instead. Refer to the owner's manual of your
mobile device for the right PIN code.
qMaking a Call Using a Telephone

Number
NOTE
Practice this while parked until you are
confident you can do it while driving in a nontaxing road situation. If you are not completely
comfortable, make all calls from a safe
parking position, and move out only when fully
under control and you can devote your eyes
and mind to driving.
Press selection button 5 or the hang-up

button of the audio control switch during
a call.
qVolume Adjustment
The power/volume dial of the audio unit
is used to adjust the volume.
Decreasing volume
Turn the power/volume dial
counterclockwise.
NOTE
l
The volume can be adjusted using the

volume switch of the audio control switch.
The music volume of the audio unit cannot
be adjusted while Bluetooth Hands-Free is
being used.

number and then press the enter button
(
2. After inputting the telephone number,
press selection button 1 or the pick-up
button of the audio control switch to
make a call.
qReceiving an Incoming Call

Receiving an incoming call
Press selection button 1 or the pick-up
button of the audio control switch.
Refusing an incoming call
Press selection button 5 or the hang-up
button of the audio control switch.
6-135
Form No.8AS3-EA-09E
Interior Comfort

Convenient Use of the
Hands-Free System
qPhonebook Usage
NOTE
Import contact
Phonebook data from your device (Mobile
phone) can be sent and registered to your
Bluetooth Hands-Free phonebook using
Bluetooth.
NOTE
When the import begins, the previous
phonebook data is deleted. The previous
phonebook data remains deleted even if the
operation is canceled during the import.

import screen.
It takes time to import. is displayed.
2. Press selection button 1 and select
Start to start import.
Importing is displayed.
NOTE

list and then press the enter button
(
) to display the Bluetooth
Hands-Free phonebook screen
containing the detailed information
recorded.
NOTE
Press each selection button to display the
alphabetical sequence for the selection button
selected.
l Each time the selection button is pressed a
letter is displayed in alphabetical order.
(Ex. selection button 1: A B C A)
l Each time selection button 8 is pressed, the
display shows the last four letters of the
alphabet (W, X, Y, Z), followed by symbols,
and then numerals.
3. Press selection button 1 or the pick-up

make a call.
qMute
The microphone can be muted during a
call.
qTransferring a Call
If you want to cancel the import, press

selection button 2 and select Cancel. The
phonebook data being imported is deleted.
Transferring a call from Hands-Free to

a device (Mobile phone)
3. When import is completed, the

screen is displayed.
qOutgoing Call Records

screen.
6-136
Form No.8AS3-EA-09E
A maximum of six outgoing call records

are displayed.
Making phone calls using the outgoing
call record or deleting one or all outgoing
call records is possible.
Interior Comfort

Making a call using the outgoing call
record
Making a call using the incoming call

record

outgoing call record screen.

incoming call record screen.
2. Press the desired selection button of the

outgoing call record.
The content of the outgoing call record
is displayed.

incoming call record.
The content of the incoming call record
is displayed.

make a call.

make a call.
Deleting one outgoing call record
Deleting one incoming call record



The content of the outgoing call record
is displayed.

The content of the incoming call record
is displayed.
3. Press selection button 2 to display

Delete recent outgoing call?.

Delete recent incoming call?.


Deleting all the outgoing call records
Deleting all the incoming call records



Delete all recent outgoing calls?.

Delete all recent incoming calls?.
3. Press selection button 1 to delete all

outgoing call records.
3. Press selection button 1 to delete all the

incoming call records.
qIncoming Call Records

A maximum of six incoming call records
are displayed.
Making phone calls using the incoming
call record or deleting one or all incoming
call records is possible.
6-137
Form No.8AS3-EA-09E
Interior Comfort

qDTMF (Dual Tone MultiFrequency Signal) Transmission
This function is used when transmitting
DTMF via the audio control panel's
manual tuning dial.
The receiver of a DTMF transmission is
generally a home telephone answering
machine or a company's automated
guidance call center.
1. Press selection button 4 after
connecting to a home device or service
to display the tone transmission screen.
number or symbol and then press the
enter button (
) to transmit the
code.
NOTE
If the DTMF code has two or more digits or
symbols, each one must be transmitted
individually.
Hands-Free Setting
qDevice
Device registration
For the registration of a Bluetooth
equipped device to Bluetooth Hands-Free,
refer to
Bluetooth Hands-Free Preparation
(page 6-133).
Device selection
NOTE
If the device name cannot be displayed, ... is
added at the end to the part of the title which
can be displayed.
Changing the link to only a Bluetooth

Hands-Free device
screen.
The symbol disappears, and the
device name and
Connection is in progress. are
displayed.
6-138
Form No.8AS3-EA-09E
Interior Comfort

normal display.
device, Error is displayed and the
display returns to the link change
screen.
NOTE
l
NOTE
If a link error occurs, check the

programming status of the Bluetooth
Hands-Free device and the location of the
device in the vehicle (not in the trunk or a
metal-type box), and then try the link
operation again.
Device (Music player) selection can also be
done by operating the panel button (page
6-98).
If a link error occurs, check the programming

status of the Bluetooth Hands-Free device and
the location of the device in the vehicle (not in
the trunk or a metal-type box), and then try the
link operation again.
Registered device (Mobile phone)

deletion
Changing the link to a Bluetooth

Hands-Free and Bluetooth audio device
NOTE

screen.
link change screen and the present
An individually registered device can be

cleared.
l

cannot be displayed, ... is added at the
end to the part of the title which can be
displayed.

screen.
4. The device name and

Please Select Device are displayed.

pair link deletion screen and the current
5. Press selection button 2 to select

Phone. The symbol disappears,
and then Connection is in progress.
is displayed.


normal display.
If an error occurs while trying to
change the link, Error is displayed,
and then it returns to the link change
screen.
4. The link delete confirmation screen is

displayed, and then
Delete select device?, the device
name, and the Bluetooth address are
displayed.
selected device.
6-139
Form No.8AS3-EA-09E
Interior Comfort

NOTE
to the previous display.
) to return
6. When the link deletion is completed,

Deleted is displayed, and then it
returns to the normal display.
If an error occurs while trying to delete
the link, Error is displayed, and then
it returns to the link deletion screen.
NOTE
If a device is deleted while it is being linked,
linking to other devices will not be possible.
Bluetooth Hands-Free device

information display
screen.
device information display screen.
If the device information is available,
the device name and Bluetooth address
are displayed, and then it returns to the
screen.
If the device information is not
available,
Failed to obtain device information.
is displayed, and then it returns to the
screen.
NOTE
6-140
Form No.8AS3-EA-09E
When Bluetooth HandsFree Cannot be Used

Bluetooth Hands-Free cannot be used
under the following conditions:
l The device is outside of the
communication area.
l The device has a malfunction.
l The device is not connected to the
hands-free unit equipped on the
vehicle.
l The device's battery is weak.
l The device is turned off.
l The device is placed where radio
reception is difficult.
l The ignition is switched off (LOCK).
Interior Comfort

FCC ID: CB2MBLUEC07 IC:279BMBLUEC07
This device complies with Part 15 of the
FCC Rules and with RSS-210 of Industry
following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any
operation.
Mazda Bluetooth HandsFree Customer Service

For toll-free Bluetooth Hands-Free
customer service call 800-430-0153 or go
to www.MazdaUSA.com/bluetooth for
assistance.
WARNING
equipment.
The term IC: before the radio
certification number only signifies that
Industry Canada technical specifications
were met.
The antenna used for this transmitter must
not be co-located or operating in
conjunction with any other antenna or
transmitter. End-users and installers must
be provided with installation instructions
and transmitter operating conditions for
satisfying RF exposure compliance.
6-141
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
Sunvisors
When you need a sunvisor, lower it for
use in front or swing it to the side.
Sunvisor
qSide Extension Sunvisors

The visor extender extends the sunvisor's
range of sun shading.
To use, pull it out.
CAUTION
When moving the sunvisor, retract
the visor extender to its original
position. Otherwise, the visor
extender could hit the rearview
mirror, headliner, or overhead
console.
6-142
Form No.8AS3-EA-09E
qVanity Mirrors
To use the vanity mirror, lower the
sunvisor.
The vanity mirror light will illuminate
when you open the cover.
Interior Comfort
Interior Equipment
Interior Lights
qIlluminated Entry System
When the illuminated entry system
operates, the overhead light (switch is in
the DOOR position), the courtesy lights
and the ground illumination light turn on
for:
l About 30 seconds after the driver's
door is unlocked and the ignition key is
removed (without advanced key) or the
ignition is switched off (with advanced
key).
l About 15 seconds after all doors are
closed.
(With Advanced key)
About 5 seconds after all doors when
the advanced key is outside of the
vehicle.
l About 15 seconds after the ignition is
switched off (LOCK) and the ignition
key removed (without advanced key)
with all doors closed.
The light also turns off when:
l The ignition is switched on and all
doors are closed.
l The driver's door is locked.
NOTE
l
Battery saver
If any door is left opened, the light turns off
after about 30 minutes to save the battery.
The light turns on again when the ignition
is switched on, or when any door is opened
after all doors have been closed.
The operation of the illuminated entry
system can be changed.
10-8.
qOverhead Lights
Front
Rear
Switch
Position
Overhead Lights
Light off
l
l
Light is on when any door is open

Light is on or off when the
illuminated entry system is on
Light on
6-143
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
qMap Lights
The map lights are switched on or off by
pressing the switches.
qCourtesy Lights
Turns on when any door is open or the
illuminated entry system is on.
Courtesy light
6-144
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
Information Display
With multi information display
Climate control display

Without multi information display
Climate control display
Clock
Trip
computer/clock
display
With trip computer
Trip computer
Climate control
display
Climate control
display
Audio/hands-free display
With trip computer
Without trip computer
qInformation Display Functions

The information display has the following functions:
l Clock
l Climate Control Display (Fully Automatic Type Air Conditioning System)
l Audio Display
l Trip Computer
l Bluetooth Hands-Free Display

Refer to Bluetooth Hands-Free on page 6-104.
Some models.
Form No.8AS3-EA-09E
6-145
Interior Comfort
Interior Equipment
qClock
NOTE
When the trip computer is being displayed,
press the CLOCK button to change the display
to the time.
The time is displayed when the ignition is

switched to ACC or ON.
3. When the button is released, the time

will be reset as follows:
(Example)
12:0112:2912:00
12:3012:591:00
NOTE
When the :00 button is released, the seconds
will start at 00.
NOTE
(With trip computer type only)
The clock display can be switched on or off by
pressing the CLOCK button.
With navigation system

Refer to the separate manual
NAVIGATION SYSTEM.
NOTE
Without navigation system
Time setting
1. Turn the ignition switch to the ACC or
ON position.
2. Adjust the time using the time setting
buttons ( , ).
The hours advance while the time
setting button ( ) is pressed.
The minutes advance while the time
setting button ( ) is pressed.
Minutes and seconds are adjusted by the GPS,

however, it is necessary to adjust hours under
the following conditions:
l Driving across different time zones
l Daylight saving time start and end
qClimate Control Display (Fully

Automatic Type)
The climate control system status is
displayed. To operate the climate control
system, refer to Climate Control System
(page 6-2).
Time resetting (Without trip computer

type only)
qAudio Display
1. Turn the ignition switch to the ACC or

ON position.
The audio system status is displayed. To

operate the audio system, refer to
Audio System (page 6-16).
2. Press and hold the :00 button for 1.5

seconds or more. The displayed time
flashes.
6-146
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
qTrip Computer
U.S.A.
The trip computer can display the

following:
l The current fuel economy.
l The average fuel economy.
l The approximate distance you can
travel on the available fuel.
l The average vehicle speed.
Switch the ignition ON.
Press the INFO switch to change the
display mode.
NOTE
When the time is being displayed, press the
INFO switch to change the display to the trip
computer.
CANADA
If you have any problems with your trip

computer, consult an Authorized Mazda
Dealer.
Current fuel economy mode
This mode displays the current fuel
economy by calculating the amount of
fuel consumption and the distance
traveled.
Current fuel economy will be calculated
and displayed every 2 seconds.
When this mode is selected, CONSUM
CUR will be displayed.
When you've slowed to about 5 km/h (3

mph), L/100 km (mpg) will be
displayed.
Average fuel economy mode
This mode displays the average fuel
economy by calculating the fuel
consumption and the distance traveled
since connecting the battery or resetting
the data.
Average fuel economy will be calculated
and displayed every minute.
When this mode is selected, CONSUM
AV will be displayed.
Some models.
Form No.8AS3-EA-09E
6-147
Interior Comfort
Interior Equipment
U.S.A.
When this mode is selected, REMNG will

be displayed.
U.S.A.
CANADA
CANADA
To clear the data being displayed, press

the INFO switch for more than 1.5
second.
After pressing the INFO switch, L/100
km ( mpg) will be displayed for about 1
minute before the fuel economy is
recalculated and displayed.
NOTE
l
Distance-to-empty mode
This mode displays the approximate
distance you can travel on the remaining
fuel based on the fuel economy.
The distance-to-empty will be calculated
and displayed every second.
6-148
Form No.8AS3-EA-09E
Even though the distance-to-empty display

may indicate a sufficient amount of
remaining mileage before refueling is
required, refuel as soon as possible if the
fuel gauge needle nears E or the low fuel
warning light illuminates.
The display won't change unless you add
more than approximately 20 L (5.3 gal) of
fuel.
Interior Comfort
Interior Equipment
Average vehicle speed mode
This mode displays the average vehicle
speed by calculating the distance and the
time traveled since connecting the battery
or resetting the data.
Average vehicle speed will be calculated
and displayed every 10 seconds.
When this mode is selected, AV will be
displayed.
U.S.A.
Cup Holder
WARNING
Never use a cup holder to hold hot
liquids while the vehicle is moving:
Using a cup holder to hold hot liquids
dangerous. If the contents spill, you
could be scalded.
CAUTION
To reduce the possibility of injury in
an accident or a sudden stop, keep
the cup holders closed when they are
not in use, or when using them for
storage.
qFront
To use the cup holder, open the center
console by pressing the lower center part
of its cover.
CANADA
To clear the data being displayed, press

the INFO switch for more than 1.5
second. After pressing the INFO switch,
km/h ( mile/h) will be displayed for
about 1 minute before the vehicle speed is
recalculated and displayed.
6-149
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
To fit small items in the cup holder,
remove the flexible divider.
Flexible divider
Bottle Holder
Bottle holders are on the inside of the
front doors.
qRear
Bottle holder
The rear cup holder is on the rear center

armrest.
CAUTION
Do not use the bottle holders for
containers without caps. The
contents may spill when the door is
opened or closed.
6-150
Some models.
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
Storage Compartments
WARNING
qStorage Pocket
To open, push the release catch down and
pull the lid downward.
Keep storage boxes closed when

driving:
Driving with the storage boxes open
is dangerous. To reduce the
possibility of injury in an accident or
a sudden stop, keep the storage
boxes closed when driving.
CAUTION
Do not leave lighters or eyeglasses in
the storage boxes while parked under
the sun. A lighter could explode or
the plastic material in eyeglasses
could deform and crack from high
temperature.
qOverhead Console
This console box is designed to store a
garage door opener or other accessories.
Push and release to open.
qGlove Box
To open the glove box, pull the latch
toward you.
Insert the key (auxiliary key*) and turn it
clockwise to lock, counterclockwise to
unlock.
* Advanced key equipped vehicle
Unlock
Lock
6-151
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
qCenter Console
Installing to the back side
To open, pull the lower release handle.

Storage tray
Using the armrest

Storage tray
The storage tray can be installed to the
front/back side of the center console.
Installing to the front side
Storage tray
CAUTION
When sliding the armrest, be careful
not to hit a drink cup placed in a cup
holder and spill its contents. Remove
cups or other drink containers from
the cup holders before pulling out the
armrest.
Press the button to slide the armrest
frontward.
6-152
Some models.
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
When storing the armrest, press and hold
the button while pulling the armrest back,
and remove your hand once it is in its
stored position.
qRear Coat Hooks
WARNING
Never hang heavy or sharp objects on
the assist grips and coat hooks:
Hanging heavy or sharp-ended
objects such as a coat hanger from
the assist grips or coat hooks is
dangerous as they can fly off and hit
an occupant in the cabin if a curtain
air bag was to deploy, which could
result in serious injury or death.
Always hang clothes on the coat hooks
and the assist grips without hangers.
qShopping Bag Hook

The shopping bag hook can be used for
hanging shopping bags.
CAUTION
Do not hang excessive weight on the
shopping bag hook as it could be
damaged.
Coat hook
Shopping bag hook

(tensile strength: 5.0
kg (11 lb))
6-153
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
Accessory Sockets
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
Center Console
The accessory sockets can be used
regardless of the position of the ignition
switch.
Front
The ignition switch must be in the ACC
or ON position.
With Advanced Key
To use, press the cover and open it.
CAUTION
Without Advanced Key
To prevent accessory socket damage

or electrical failure, pay attention to
the following:
Do not use accessories that require
more than 120 W (DC 12 V, 10 A).
Do not use accessories that are not
genuine Mazda accessories or the
equivalent.
Close the cover when the accessory
socket is not in use to prevent
foreign objects and liquids from
getting into the accessory socket.
Correctly insert the plug into the
accessory socket.
Do not insert the cigarette lighter
into the accessory socket.
Noise may occur on the audio
playback depending on the device
connected to the accessory socket.
NOTE
To prevent discharging of the battery, do not
use the socket for long periods with the engine
off or idling.
6-154
Form No.8AS3-EA-09E
Interior Comfort
Interior Equipment
Connecting the accessory socket
1. Open the lid.
2. Pass the connection plug cord through
the cutout of the console and insert the
plug into the accessory socket.
Plug
6-155
Form No.8AS3-EA-09E
6-156
Form No.8AS3-EA-09E
Helpful information on what to do in an emergency.
Parking in an Emergency ............................................................. 7-2

Parking in an Emergency .......................................................... 7-2
Flat Tire ......................................................................................... 7-3
Spare Tire and Tool Storage ...................................................... 7-3
Changing a Flat Tire ................................................................. 7-6
Overheating ................................................................................. 7-11
Overheating ............................................................................. 7-11
Emergency Starting ....................................................................
Starting a Flooded Engine .......................................................
Jump-Starting ..........................................................................
Push-Starting ...........................................................................
7-13
7-13
7-14
7-16
Emergency Towing ..................................................................... 7-17

Towing Description ................................................................. 7-17
Recreational Towing ............................................................... 7-18
7-1
Form No.8AS3-EA-09E
Parking in an Emergency
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning flasher and all

the turn signals will flash.
NOTE
l
The turn signals do not work when the

hazard warning lights are on.
Check local regulations about the use of
hazard warning lights while the vehicle is
being towed to verify that it is not in
violation of the law.
7-2
Form No.8AS3-EA-09E
Flat Tire
Spare Tire and Tool Storage
Spare tire and tools are stored in the locations illustrated in the diagram.
Jack
Long bolt for flat tire

Short bolt for flat tire
Lug wrench
Spare tire
7-3
Form No.8AS3-EA-09E
Flat Tire
qJack
To secure the jack
To remove the jack
1. Insert the wing bolt into the jack with

the jack screw pointing front and turn
the wing bolt clockwise to temporarily
tighten it.
1. Open the trunk mat.
2. Turn the jack screw in the direction

shown in the figure.
Wing bolt
2. Remove the jack container lid.

Jack screw
3. Turn the wing bolt completely to

secure the jack.
NOTE
If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.
qSpare Tire
3. Turn the wing bolt and jack screw
counterclockwise.
Wing bolt
Jack screw
7-4
Form No.8AS3-EA-09E
Your Mazda has a temporary spare tire.

The temporary spare tire is lighter and
smaller than a conventional tire, and is
designed only for emergency use and
should be used only for VERY short
periods. Temporary spare tires should
NEVER be used for long drives or
extended periods.
Flat Tire
WARNING
Do not install the temporary spare tire
on the front wheels (driving wheels):
Driving with the temporary spare tire
on one of the front driving wheels is
dangerous. Handling will be affected.
You could lose control of the vehicle,
especially on ice or snow bound
roads, and have an accident. Move a
regular tire to the front wheel and
install the temporary spare tire to the
rear.
To remove the spare tire

1. Remove the trunk mat, and if a trunk
board is equipped remove it also.
CAUTION
When using the temporary spare
tire, driving stability may decrease
compared to when using only the
conventional tire. Drive carefully.
To avoid damage to the temporary
spare tire or to the vehicle, observe
the following precautions:
Do not exceed 80 km/h (50
mph).
Avoid driving over obstacles.
Also, do not drive through an
automatic car wash. This tire's
diameter is smaller than a
conventional tire, so the ground
clearance is reduced about
7 mm (0.3 in).
Do not use tire chains on any
type of tire, including the spare
tire.
Do not use your temporary
spare tire on any other vehicle,
it has been designed only for
your Mazda.
Use only one temporary spare
tire on your vehicle at the same
time.
2. Turn the tire hold-down bolt

counterclockwise using the lug wrench.
To secure the spare tire

Perform the removal procedure in reverse.
7-5
Form No.8AS3-EA-09E
Flat Tire
Changing a Flat Tire
NOTE
If the following occurs while driving, it could
indicate a flat tire.
l Steering becomes difficult.
l The vehicle begins to vibrate excessively.
l The vehicle pulls in one direction.
If you have a flat tire, drive slowly to a

level spot that is well off the road and out
of the way of traffic to change the tire.
Stopping in traffic or on the shoulder of a
busy road is dangerous.
3. Turn on the hazard warning flasher.

4. Have everyone get out of the vehicle
and away from the vehicle and traffic.
5. Remove the jack, tool, and spare tire
(page 7-3).
6. Block the wheel diagonally opposite
the flat tire. When blocking a wheel,
place a tire block both in front and
behind the tire.
WARNING
Be sure to follow the directions for
changing a tire, and never get under a
vehicle that is supported only by a jack:
Changing a tire is dangerous if not
done properly. The vehicle can slip off
the jack and seriously injure
someone. If getting under the vehicle
becomes necessary use vehicle
support stands.
Never allow anyone inside a vehicle
supported by a jack:
Allowing someone to remain in a
vehicle supported by a jack is
dangerous. The occupant could cause
the vehicle to fall resulting in serious
injury.
NOTE
Make sure the jack is well lubricated before
using it.
1. Park on a level surface off the right-ofway and firmly set the parking brake.
2. Put a vehicle with an automatic
transaxle in Park (P), a manual
transaxle in Reverse (R) or 1, and turn
off the engine.
7-6
Form No.8AS3-EA-09E
NOTE
When blocking a tire, use rocks or wood blocks
of sufficient size if possible to hold the tire in
place.
Flat Tire
qRemoving a Flat Tire
1. If your vehicle is equipped with a
wheel cover, pry off the wheel cover
with the beveled end of the lug wrench.
NOTE
Force the end of the lug wrench firmly between
wheel and cover, or removal will be difficult.
2. Loosen the lug nuts by turning them

counterclockwise one turn each, but do
not remove any lug nuts until the tire
has been raised off the ground.
3. Place the jack under the jacking

position closest to the tire being
changed.
CAUTION
Align the notch on the wheel cover
with the valve stem when installing
it.
Notch
Jacking position
Tire valve
Damage could occur during

installation if the wheel cover is not
properly aligned.
7-7
Form No.8AS3-EA-09E
Flat Tire
WARNING
Use only the front and rear jacking
positions recommended in this manual:
Attempting to jack the vehicle in
positions other than those
recommended in this manual is
dangerous. The vehicle could slip off
the jack and seriously injure or even
kill someone.
Use only the jack provided with your
Mazda:
Using a jack that is not designed for
your Mazda is dangerous. The vehicle
could slip off the jack and seriously
injure someone.
Never place objects under the jack:
Jacking the vehicle with an object
under the jack is dangerous. The jack
could slip and someone could be
seriously injured by the jack or the
falling vehicle.
5. Remove the lug nuts by turning them

counterclockwise; then remove the
wheel and center cap.
qLocking Lug Nuts

If your vehicle has optional antitheft
wheel lug nuts, one on each wheel will
lock the tires and you must use a special
key to unlock them. This key is attached
to the lug wrench and is stored with the
spare tire. Register them with the lock
manufacturer by filling out the card
provided in the glove box and mailing it
in the accompanying envelope. If you lose
this key, consult an Authorized Mazda
Dealer or use the lock manufacturer's
order form, which is with the registration
card.
Antitheft lug nut
Special key
4. Turn the lug wrench clockwise and

raise the vehicle high enough so that
the spare tire can be installed. Before
removing the lug nuts, make sure your
Mazda is firmly in position and that it
cannot slip or move.
To remove an antitheft lug nut
1. Obtain the key for the antitheft lug nut.
2. Place the key on top of the nut, and be
sure to hold the key square to it. If you
hold the key at an angle, you may
damage both key and nut. Don't use a
power impact wrench.
3. Place the lug wrench on top of the key
and apply pressure. Turn the wrench
counterclockwise.
7-8
Some models.
Form No.8AS3-EA-09E
Flat Tire
To install the nut
1. Place the key on top of the nut, and be
sure to hold the key square to it. If you
hold the key at an angle, you may
damage both key and nut. Don't use a
power impact wrench.
3. Install the lug nuts with the beveled

edge inward; tighten them by hand.
2. Place the lug wrench on top of the key,

apply pressure, and turn it clockwise.
qMounting the Spare Tire

1. Remove dirt and grime from the
mounting surfaces of the wheel and
hub, including the hub bolts, with a
cloth.
WARNING
Do not apply oil or grease to lug nuts
and bolts and do not tighten the lug
nuts beyond the recommended
tightening torque:
Applying oil or grease to lug nuts and
bolts is dangerous. The lug nuts
could loosen while driving and cause
the tire to come off, resulting in an
accident. In addition, lug nuts and
bolts could be damaged if tightened
more than necessary.
WARNING
Make sure the mounting surfaces of
the wheel, hub and lug nuts are clean
before changing or replacing tires:
When changing or replacing a tire,
not removing dirt and grime from the
mounting surfaces of the wheel, hub
and hub bolts is dangerous. The lug
nuts could loosen while driving and
cause the tire to come off, resulting in
an accident.
4. Turn the lug wrench counterclockwise

and lower the vehicle. Use the lug
wrench to tighten the nuts in the order
shown.
2. Mount the spare tire.
7-9
Form No.8AS3-EA-09E
Flat Tire
If you are unsure of how tight the nuts
should be, have them inspected at an
Nut tightening torque
Nm (kgfm, ftlbf) 88118 (9.012, 6587)
WARNING
Always securely and correctly tighten
the lug nuts:
Improperly or loosely tightened lug
nuts are dangerous. The wheel could
wobble or come off. This could result
in loss of vehicle control and cause a
serious accident.
Be sure to reinstall the same nuts you
removed or replace them with metric
nuts of the same configuration:
Because the wheel studs and lug nuts
on your Mazda have metric threads,
using a non-metric nut is dangerous.
On a metric stud, it would not secure
the wheel and would damage the
stud, which could cause the wheel to
slip off and cause an accident.
5. Remove the center cap by tapping it
with the lug wrench.
6. Store the damaged tire, using the tire
hold-down bolt to hold it in place.
Bolt
16-inch wheel
18-inch wheel
Tire clamp
17-inch wheel
7-10
Form No.8AS3-EA-09E
Bolt type
Wheel size
Short bolt 16-inch wheel
Long bolt 17-inch wheel, 18-inch wheel
7. Store the damaged tire in the trunk

(page 7-4).
8. Remove the tire blocks and store the
tools and jack.
9. Check the inflation pressure. Refer to
the specification charts on page 10-7.
10. Have the flat tire repaired or replaced
as soon as possible.
WARNING
Do not drive with any tires that have
incorrect air pressure:
Driving on tires with incorrect air
pressure is dangerous. Tires with
incorrect pressure could affect
handling and result in an accident.
When you check the regular tires' air
pressure, check the spare tire, too.
NOTE
To prevent the jack and tool from rattling, store
them properly.
Overheating
Overheating
If the temperature gauge indicates
overheating, the vehicle loses power, or
you hear a loud knocking or pinging
noise, the engine is probably too hot.
WARNING
Switch the ignition to off and
make sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan
could continue running indefinitely
even if the engine has stopped and
the engine compartment temperature
is high. You could be hit by the fan
and seriously injured.
2. Put a vehicle with an automatic

transaxle in park (P), a manual
transaxle in neutral.
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam is
escaping from under the hood or from
the engine compartment.
If steam is coming from the engine
compartment:
Don't go near the front of the vehicle.
Stop the engine.
Wait until the steam dissipates, then
open the hood and start the engine.
If neither coolant nor steam is
escaping:
Open the hood and idle the engine until
it cools.
CAUTION
Do not remove either cooling
system caps when the engine and
radiator are hot:
When the engine and radiator are
hot, scalding coolant and steam may
shoot out under pressure and cause
serious injury.
Open the hood ONLY after steam is no
longer escaping from the engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you.
If the cooling fan does not operate

while the engine is running, the
engine temperature will increase.
Stop the engine and call an
6. Make sure the cooling fan is operating,
then turn off the engine after the
temperature has decreased.
7. When cool, check the coolant level.
If it's low, look for coolant leaks from
the radiator and hoses.
If the temperature gauge indicates

overheating:
1. Drive safely to the side of the road and
park off the right-of-way.
7-11
Form No.8AS3-EA-09E
Overheating
If you find a leak or other damage, or if
coolant is still leaking:
Stop the engine and call an Authorized
Mazda Dealer.
If you find no problems, the engine is

cool, and no leaks are obvious:
Carefully add coolant as required (page
8-21).
CAUTION
If the engine continues to overheat or
frequently overheats, have the
cooling system inspected. The engine
could be seriously damaged unless
repairs are made. Consult an
7-12
Form No.8AS3-EA-09E
Emergency Starting
Starting a Flooded Engine
Except 3.7-liter engine
If the engine fails to start, it may be
flooded (excessive fuel in the engine).
If the engine still does not start using the

above procedure, have your vehicle
inspected by an Authorized Mazda
Dealer.
Follow this procedure:

(Without Advanced Keyless Entry &
Push Button Start System)
1. If the engine does not start within five
seconds on the first try, turn the key to
the LOCK position, wait ten seconds
and try again.
2. Depress the accelerator all the way and
hold it there.
3. Turn the ignition switch to the START
position and hold it therefor up to
ten seconds. If the engine starts, release
the key and accelerator immediately
because the engine will suddenly rev
up.
4. If the engine fails to start, crank it
without depressing the acceleratorfor
up to ten seconds.
(With Advanced Keyless Entry & Push
Button Start System)
1. If the engine does not start within five
seconds on the first try, wait ten
seconds and try again.
2. Depress the accelerator all the way and
hold it there.
3. Depress the clutch pedal then press the
push button start. If the engine starts,
release the key and accelerator
immediately because the engine will
suddenly rev up.
4. If the engine fails to start, crank it
without depressing the accelerator.
7-13
Form No.8AS3-EA-09E
Emergency Starting
Jump-Starting
Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you
feel unsure about jump-starting, we strongly recommend that you have a competent service
technician do the work.
WARNING
Follow These Precautions Carefully:
To ensure safe and correct handling of the battery, read the following precautions
carefully before using the battery or inspecting it.
Always wear eye protection when working near the battery:

Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID
which could cause blindness if splashed into your eyes. Also, hydrogen gas produced
during normal battery operation, could ignite and cause the battery to explode.
Wear eye protection and protective gloves to prevent contact with battery
fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets in
eyes, skin or clothing. If this happens, immediately flush your eyes with water for 15
minutes or wash your skin thoroughly and get medical attention.
Always keep batteries out of the reach of children:

Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin.
Do not allow the positive ( ) terminal to contact any other metal object that
could cause sparks:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. When working near a
battery, do not allow metal tools to contact the positive ( ) or negative ( )
terminal of the battery.
7-14
Form No.8AS3-EA-09E
Emergency Starting
Keep all flames, including cigarettes, and sparks away from open battery cells:
exploding battery can cause serious burns and injuries.
Do not jump-start a frozen battery or one with a low fluid level:
Jump-starting a frozen battery or one with a low fluid level is dangerous. It may
rupture or explode, causing serious injury.
Connect the negative cable to a good ground point away from the battery:
Connecting the end of the second jumper cable to the negative ( ) terminal of the
discharged battery is dangerous.
A spark could cause the gas around the battery to explode and injure someone.
Route the jumper cables away from parts that will be moving:
Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.
The cable could get caught when the engine starts and cause serious injury.
CAUTION
Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and
other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in
series or a 24 V motor generator set).
Connect cables in numerical order and disconnect in reverse order.
2.5-liter engine
Discharged battery 3.7-liter engine
Jumper cables
Booster battery
Discharged battery
Jumper cables
Booster battery
7-15
Form No.8AS3-EA-09E
Emergency Starting
1. Make sure the booster battery is 12 V
and that its negative terminal is
grounded.
2. If the booster battery is in another
vehicle, don't allow both vehicles to
touch. Turn off the engine of the
vehicle with the booster battery and all
unnecessary electrical loads in both
vehicles.
3. Connect the jumper cables in the exact
sequence as in the illustration.
l
Connect one end of a cable to the

positive terminal on the discharged
battery (1).
Attach the other end to the positive
terminal on the booster battery (2).
Connect one end of the other cable
to the negative terminal of the
booster battery (3).
Connect the other end to the ground
point indicated in the illustration
away from the discharged battery
(4).
4. Start the engine of the booster vehicle

and run it a few minutes. Then start the
engine of the other vehicle.
5. When finished, carefully disconnect the
cables in the reverse order described in
the illustration.
7-16
Form No.8AS3-EA-09E
Push-Starting
Do not push-start your Mazda.
WARNING
Never tow a vehicle to start it:
Towing a vehicle to start it is
dangerous. The vehicle being towed
could surge forward when its engine
starts, causing the two vehicles to
collide. The occupants could be
injured.
CAUTION
Do not push-start a vehicle that has
a manual transaxle. It can damage
the emission control system.
NOTE
You can't start a vehicle with an automatic
transaxle by pushing it.
Emergency Towing
Towing Description
We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.
CAUTION
Do not tow the vehicle pointed
backward with driving wheels on the
ground. This may cause internal
damage to the transaxle.
Proper lifting and towing are necessary to

prevent damage to the vehicle.
Government and local laws must be
followed.
A towed vehicle usually should have its
drive wheels (front wheels) off the
ground. If excessive damage or other
conditions prevent this, use wheel dollies.
CAUTION
Wheel dollies
Do not tow with sling-type

equipment. This could damage your
vehicle. Use wheel-lift or flatbed
equipment.
When towing with the rear wheels on the

ground, release the parking brake.
7-17
Form No.8AS3-EA-09E
Emergency Towing
Recreational Towing
An example of recreational towing is
towing your vehicle behind a motorhome.
The transaxle is not designed for towing
this vehicle on all 4 wheels.
When doing recreational towing refer to
Towing Description (page 7-17) and
carefully follow the instructions.
7-18
Form No.8AS3-EA-09E

How to keep your Mazda in top condition.
Introduction .................................................................................. 8-2

Introduction ............................................................................... 8-2
Scheduled Maintenance ................................................................ 8-3
Scheduled Maintenance (USA, Canada, and Puerto Rico) ....... 8-3
Scheduled Maintenance (Mexico) ............................................. 8-8
Owner Maintenance ...................................................................
Owner Maintenance Schedule ................................................
Owner Maintenance Precautions .............................................
Engine Compartment Overview ..............................................
Engine Oil ...............................................................................
Engine Coolant .......................................................................
Brake/Clutch Fluid ..................................................................
Power Steering Fluid ...............................................................
Automatic Transaxle Fluid (ATF) ...........................................
Washer Fluid ...........................................................................
Body Lubrication ....................................................................
Wiper Blades ...........................................................................
Battery .....................................................................................
Tires ........................................................................................
Light Bulbs .............................................................................
Fuses .......................................................................................
8-15
8-15
8-16
8-18
8-19
8-21
8-22
8-23
8-24
8-27
8-28
8-28
8-31
8-32
8-37
8-46
Appearance Care ........................................................................

How to Minimize Environmental Paint Damage ....................
Exterior Care ...........................................................................
Interior Care ............................................................................
8-52
8-52
8-54
8-57
8-1
Form No.8AS3-EA-09E
Introduction
Introduction
Be extremely careful and prevent injury to yourself and others or damage to your vehicle
when using this manual for inspection and maintenance.
If you are unsure about any procedure it describes, we strongly urge you to have a reliable
and qualified service shop perform the work, preferably an Authorized Mazda Dealer.
Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.
Without this expertise and the parts that have been designed and made especially for your
Mazda, inadequate, incomplete, and insufficient servicing may result in problems. This
could lead to vehicle damage or an accident and injuries.
For expert advice and quality service, consult an Authorized Mazda Dealer.
The owner should retain evidence that proper maintenance has been performed as
prescribed.
Claims against the warranty resulting from lack of maintenance, as opposed to defective
materials or authorized Mazda workmanship, will not be honored.
Any auto repair shop using parts equivalent to your Mazda's original equipment may
perform maintenance. But we recommend that it always be done by an Authorized
Mazda Dealer using genuine Mazda parts.
8-2
Form No.8AS3-EA-09E
Scheduled Maintenance
Scheduled Maintenance (USA, Canada, and Puerto Rico)
Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.
l Repeated short-distance driving
l Driving in dusty conditions
l Driving with extended use of brakes
l Driving in areas where salt or other corrosive materials are used
l Driving on rough or muddy roads
l Extended periods of idling or low-speed operation
l Driving for long periods in cold temperatures or extremely humid climates
l Driving in extremely hot conditions
l Driving in mountainous conditions continually
If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).
NOTE
After the prescribed period, continue to follow the described maintenance at the recommended
intervals.
8-3
Form No.8AS3-EA-09E
qSchedule 1
Number of months or kilometers (miles), whichever comes first
Months
6
12
18
24
30
36
42
48
1000 km
12
24
36
48
60
72
84
96
1000 miles
7.5
15
22.5
30
37.5
45
52.5
60
Maintenance Interval
ENGINE
Audibly inspect every 120,000 km (75,000 miles),
if noisy, adjust
Engine valve clearance (for 2.5-liter engine)

2.5-liter engine
Drive belts
3.7-liter engine
Engine oil
Engine oil filter
COOLING SYSTEM
R
R
FL22 type*1
Engine coolant
Others
I
Inspect every 168,000 km (105,000 miles)
Replace every 240,000 km (150,000 miles)
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Replace at first 192,000 km (120,000 miles) or 10 years; after

that, every 96,000 km (60,000 miles) or 5 years
Replace at first 96,000 km (60,000 miles) or 4 years; after that,
every 2 years
FUEL SYSTEM
Air filter
2.5-liter engine
3.7-liter engine
Fuel lines and hoses*2
R
I
Hoses and tubes for emission*2

IGNITION SYSTEM
Spark plugs
C
I
I
2.5-liter engine
3.7-liter engine

CHASSIS and BODY

Brake lines, hoses and connections
Disc brakes
Tire (Rotation)
Steering operation and linkages
Front and rear suspension, ball joints and wheel
bearing axial play
Driveshaft dust boots
Bolts and nuts on chassis and body
Exhaust system and heat shields
All locks and hinges
8-4
Form No.8AS3-EA-09E
I
I
I
I
Rotate every 12,000 km (7,500 miles)
I
I
I
I
T
T
Inspect every 72,000 km (45,000 miles) or 5 years
L
L
L
L
L
L
L
L

Months
6
12
18
24
30
36
42
48
1000 km
12
24
36
48
60
72
84
96
1000 miles
7.5
15
22.5
30
37.5
45
52.5
60
AIR CONDITIONER SYSTEM

Cabin air filter
Replace every 40,000 km (25,000 miles) or 2 years
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
L: Lubricate
T: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription FL22 on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
8-5
Form No.8AS3-EA-09E
qSchedule 2

Months
4
8 12 16 20 24 28 32 36 40 44
1000 km
8 16 24 32 40 48 56 64 72 80 88
1000 miles
5 10 15 20 25 30 35 40 45 50 55
48
96
60
ENGINE
Audibly inspect every 120,000 km (75,000 miles), if noisy,

adjust
2.5-liter engine
Drive belts
Engine oil
3.7-liter engine
Puerto Rico
Others
Engine oil filter

COOLING SYSTEM
FL22 type*1
Engine coolant
Others
Engine coolant level
FUEL SYSTEM
Air filter (for 2.5-liter engine)
Air filter (for 3.7-liter engine)
R
R
I
Inspect every 160,000 km (100,000 miles)
Replace every 5,000 km (3,000 miles) or 3 months
R R R R R R R R R R
R R R R R R R R R R
R
R
Replace at first 192,000 km (120,000 miles) or 10 years ;after

that, every 96,000 km (60,000 miles) or 5 years
Replace at first 96,000 km (60,000 miles) or 4 years; after that,
every 2 years
I
I
I
I
I
I
I
I
I
I
I
I
Puerto Rico
Others
R
R
Puerto Rico
Others
R
C
Fuel lines and hoses*2
Hoses and tubes for emission*2
IGNITION SYSTEM
USA
Others*3
USA
Spark plugs (for 3.7-liter engine)
Others*3
ELECTRICAL SYSTEM
Function of all lights

Spark plugs (for 2.5-liter engine)
8-6
Form No.8AS3-EA-09E

Months
4
8 12 16 20 24 28 32 36 40 44
1000 km
8 16 24 32 40 48 56 64 72 80 88
1000 miles
5 10 15 20 25 30 35 40 45 50 55
CHASSIS and BODY

Brake fluid level

Disc brakes
Tire (Rotation)
Tire inflation pressure and tire wear
Power steering fluid level

bearing axial play

Washer fluid level
Cabin air filter
I
I
I
I
I
I
I
I
I
Rotate every 8,000 km (5,000 miles)
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
L
I
48
96
60
T
Inspect every 72,000 km (45,000 miles) or 5 years
L
L
L
L
L
L
L
L
L
L
I
I
I
I
I
I
I
I
I
I
I
I
T
L
I
Replace every 40,000 km (25,000 miles) or 2 years
Chart symbols:
R: Replace
C: Clean
L: Lubricate
T: Tighten
Remarks:
the recommended time or mileage/kilometer period to ensure long-term reliability.
*3 If the vehicle is operated primarily under any of the following conditions, replace the spark plugs at every
96,000 km (60,000 miles) or shorter.
a) Repeated short-distance driving
b) Extended periods of idling or low-speed operation
c) Driving for long periods in cold temperatures or extremely humid climates
8-7
Form No.8AS3-EA-09E
Scheduled Maintenance (Mexico)
Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.
l Repeated short-distance driving
l Driving in dusty conditions
l Driving with extended use of brakes
l Driving in areas where salt or other corrosive materials are used
l Driving on rough or muddy roads
l Extended periods of idling or low-speed operation
l Driving for long periods in cold temperatures or extremely humid climates
l Driving in extremely hot conditions
l Driving in mountainous conditions continually
If any do apply, follow Schedule 2.
NOTE
After the prescribed period, continue to follow the described maintenance at the recommended
intervals.
8-8
Form No.8AS3-EA-09E
qSchedule 1
Number of months or kilometers, whichever comes first
Months
6 12 18 24 30 36 42 48 54 60 66 72
1000 km
10 20 30 40 50 60 70 80 90 100 110 120
ENGINE
2.5-liter engine
Drive belts
3.7-liter engine
Engine oil
Engine oil filter
COOLING SYSTEM
R
R
Cooling system
R
R
I
I
I
Replace at first 190,000 km or 10 years; after that, every
60,000 km or 3 years
*1
Engine coolant
Audibly inspect every 120,000 km, if noisy, adjust

I
I
Inspect every 40,000 km or 2 years
Replace every 240,000 km
R R R R R R R R R R
R R R R R R R R R R
FL22 type
Others
FUEL SYSTEM
Air filter
Fuel lines and hoses
I*2
I*2
Hoses and tubes for emission
I*2
I*2
Fuel filter
IGNITION SYSTEM
Spark plugs
CHASSIS and BODY
Brake fluid level

Brake fluid
Disc brakes
Tire (Rotation)
bearing axial play

I
I
I
I
I
I
I
I
I
I
I
I
I
I
R
I
R
I
I
I
I
Rotate every 10,000 km
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
R
I
I
I
I
I
I
I
I
I
I
I
I
I

Washer fluid level
L
I
I
L
I
L
I
I
L
I
L
I
I
L
I
L
I
I
L
I
L
I
I
L
I
L
I
I
L
I
8-9
Form No.8AS3-EA-09E

Months
6 12 18 24 30 36 42 48 54 60 66 72
1000 km
10 20 30 40 50 60 70 80 90 100 110 120

Cabin air filter
Chart symbols:
R: Replace
L: Lubricate
T: Tighten
Remarks:
the recommended time or kilometer period to ensure long-term reliability.
8-10
Form No.8AS3-EA-09E
qSchedule 2

Months
3
6
9 12 15 18 21 24 27 30 33
1000 km
5 10 15 20 25 30 35 40 45 50 55
ENGINE
2.5-liter engine
Drive belts
3.7-liter engine
Engine oil
Engine oil filter
COOLING SYSTEM
R
R
Cooling system

I
R R R R R R R R R R
R R R R R R R R R R
FL22 type
Others

FUEL SYSTEM
Air filter
R
R
I
*1
Engine coolant
36
60
R
I
I*2
I*2
Fuel filter
IGNITION SYSTEM
Spark plugs
ELECTRICAL SYSTEM
I
R

I
8-11
Form No.8AS3-EA-09E

Months
3
6
9 12 15 18 21 24 27 30 33
1000 km
5 10 15 20 25 30 35 40 45 50 55
CHASSIS and BODY

Brake fluid level
I
I
I
I
Brake fluid
Disc brakes
36
60
I
R
I
Tire (Rotation)

I
I
I

bearing axial play

I
I
Washer fluid level

Cabin air filter
Chart symbols:
R: Replace
C: Clean
L: Lubricate
T: Tighten
Remarks:
8-12
Form No.8AS3-EA-09E
(Cont.)

Months
39 42 45 48 51 54 57 60 63 66 69 72
1000 km
65 70 75 80 85 90 95 100 105 110 115 120
ENGINE
2.5-liter engine
Drive belts
3.7-liter engine
Engine oil
Engine oil filter
COOLING SYSTEM
Cooling system
R
R

R R R R R R R R
R R R R R R R R
R
R
R
R
R
R
I
*1
Engine coolant

I
FL22 type
Others

FUEL SYSTEM
Air filter

R
R
I
I
I
I
I
I
I
I
I
I
I
I
C
I*2
I*2
Fuel filter
IGNITION SYSTEM
Spark plugs
ELECTRICAL SYSTEM

I
8-13
Form No.8AS3-EA-09E

Months
39 42 45 48 51 54 57 60 63 66 69 72
1000 km
65 70 75 80 85 90 95 100 105 110 115 120
CHASSIS and BODY

Brake fluid level
I
I
Brake fluid
Disc brakes
Tire (Rotation)

I
I
I

bearing axial play

I
I
Washer fluid level

Cabin air filter
Chart symbols:
R: Replace
C: Clean
L: Lubricate
T: Tighten
Remarks:
8-14
Form No.8AS3-EA-09E
Owner Maintenance
Owner Maintenance Schedule
The owner or a qualified service technician should make these vehicle inspections at the
indicated intervals to ensure safe and dependable operation.
Bring any problem to the attention of an Authorized Mazda Dealer or qualified service
technician as soon as possible.
qWhen Refueling
l
l
l
l
Brake and clutch fluid level (page 8-22)

Engine coolant level (page 8-21)
Engine oil level (page 8-20)
Washer fluid level (page 8-27)
qAt Least Monthly

Tire inflation pressures (page 8-32)
qAt Least Twice a Year (For Example, Every Spring and Fall)
l Automatic transaxle fluid level (page 8-24)
You can do the following scheduled maintenance items if you have some mechanical
ability and a few basic tools and if you closely follow the directions in this manual.
l Engine coolant (page 8-21)
l Engine oil (page 8-19)
8-15
Form No.8AS3-EA-09E
Owner Maintenance
Owner Maintenance Precautions
Improper or incomplete service may result in problems. This section gives instructions only
for items that are easy to perform.
As explained in the Introduction (page 8-2), several procedures can be done only by a
qualified service technician with special tools.
Improper owner maintenance during the warranty period may affect warranty coverage.
For details, read the separate Mazda Warranty statement provided with the vehicle. If
you're unsure about any servicing or maintenance procedure, have it done by an
There are strict environmental laws regarding the disposal of waste oil and fluids. Please
dispose of your waste properly and with due regard to the environment.
We recommend that you entrust the oil and fluid changes of your vehicle to an Authorized
Mazda Dealer.
8-16
Form No.8AS3-EA-09E
Owner Maintenance
WARNING
Do not perform maintenance work if you lack sufficient knowledge and experience or
the proper tools and equipment to do the work. Have maintenance work done by a
qualified technician:
Performing maintenance work on a vehicle is dangerous if not done properly. You
can be seriously injured while performing some maintenance procedures.
If you must run the engine while working under the hood, make certain that you
remove all jewelry (especially rings, bracelets, watches, and necklaces) and all
neckties, scarves, and similar loose clothing before getting near the engine or cooling
fan which may turn on unexpectedly:
Working under the hood with the engine running is dangerous. It becomes even
more dangerous when you wear jewelry or loose clothing.
Either can become entangled in moving parts and result in injury.
Switch the ignition to off and make sure the fan is not running before
attempting to work near the cooling fan:
Working near the cooling fan when it is running is dangerous. The fan could
continue running indefinitely even if the engine has stopped and the engine
compartment temperature is high. You could be hit by the fan and seriously injured.
Do not leave items in the engine compartment:
After you have finished checking or doing servicing in the engine compartment, do
not forget and leave items such as tools or rags in the engine compartment.
Tools or other items left in the engine compartment could cause engine damage or a
fire leading to an unexpected accident.
NOTE
Once the engine coolant exceeds a preset temperature, an electrical cooling fan turns on. It will
continue running for about 10 minutes after the ignition is switched off.
8-17
Form No.8AS3-EA-09E
Owner Maintenance
Engine Compartment Overview
2.5-liter engine
Fuse block
Automatic transaxle fluid-level dipstick

(only for automatic transaxle)
Engine coolant
reservoir
Brake/Clutch
fluid reservoir
Engine oil-filler cap
Battery
Windscreen washer
Engine oil dipstick
fluid reservoir
Power steering fluid reservoir
3.7-liter engine
Engine coolant
reservoir
Brake fluid reservoir

Power steering fluid reservoir
Fuse block
Battery
Engine oil dipstick
Windscreen washer
fluid reservoir
Engine oil-filler cap
8-18
Form No.8AS3-EA-09E
Automatic transaxle fluid-level dipstick
Owner Maintenance
Engine Oil
NOTE
Changing the engine oil should be done by an
qRecommended Oil
Use SAE 5W-20 engine oil.
Oil container labels provide important
information.
A chief contribution this type of oil makes
to fuel economy is reducing the amount of
fuel necessary to overcome engine
friction.
U.S.A. and CANADA
Only use oils Certified For Gasoline

Engines by the American Petroleum
Institute (API). An oil with this trademark
symbol conforms to the current engine
and emission system protection standards
and fuel economy requirements of the
International Lubricant Standardization
and Approval Committee (ILSAC),
comprised of U.S. and Japanese
automobile manufacturers.
30 20 10
20
20
10
40
20
60
30
40
50
80 100 120
5W-20
Except U.S.A. and CANADA

(ILSAC)
(ILSAC)
(Mexico)
2.5-liter engine
Use SAE 5W-20 engine oil. If SAE 5W20 engine oil is not available, use SAE
5W-30 engine oil.
8-19
Form No.8AS3-EA-09E
Owner Maintenance
3.7-liter engine
Use SAE 5W-20 engine oil. If SAE 5W20 engine oil is not available, use SAE
10W-30 10W-40 5W-40 engine oil.
3.7-liter engine
Full
Low
The quality designation SM, or ILSAC

must be on the label.
30 20 10
20
20
10
40
20
60
30
40
50
80 100 120
5W-20
qInspecting Engine Oil Level

1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5 minutes
for the oil to return to the oil pan.
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
2.5-liter engine
Full
OK
Low
8-20
Form No.8AS3-EA-09E
5. 2.5-liter engine
Pull it out again and examine the level.
The level is normal if it is between
Low and Full.
If it is near or below Low, add enough
oil to bring the level to Full.
3.7-liter engine
Pull it out again and examine the level.
The level is normal if it is between
Low and Full. If it is below Low, add
oil to raise the level within the hatching
zone.
CAUTION
Do not add engine oil over Full. This
may cause engine damage.
6. Make sure the O-ring on the dipstick is
positioned properly before reinserting
the dipstick.
Owner Maintenance
Engine Coolant
qInspecting Coolant Level
WARNING
Do not use a match or live flame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS HOT:
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become
very hot. You could be burned.
Carefully inspect the engine coolant
in the coolant reservoir, but do not
open it.
Switch the ignition to off and

make sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan
could continue running indefinitely
even if the engine has stopped and
the engine compartment temperature
is high. You could be hit by the fan
and seriously injured.
Do not remove the cooling

system cap when the engine and
radiator are hot:
When the engine and radiator are
hot, scalding coolant and steam may
shoot out under pressure and cause
serious injury.
Inspect the antifreeze protection and

coolant level in the coolant reservoir at
least once a yearat the beginning of the
winter seasonand before traveling
where temperatures may drop below
freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the FULL or F and
LOW or L marks on the coolant reservoir
when the engine is cool.
If it's at or near LOW or L, add enough

coolant to the coolant reservoir to provide
freezing and corrosion protection and to
bring the level to FULL or F.
NOTE
Changing the coolant should be done by an
8-21
Form No.8AS3-EA-09E
Owner Maintenance
CAUTION
Radiator coolant will damage
paint.
Rinse it off quickly if spilled.
Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.
Don't add only water. Always add
a proper coolant mixture.
The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.
DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.
DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.
Don't use a solution that contains
more than 60% antifreeze.
This would reduce effectiveness.
If the coolant reservoir is empty or new
coolant is required frequently, consult an
8-22
Form No.8AS3-EA-09E
Brake/Clutch Fluid
qInspecting Brake/Clutch Fluid Level
The brakes and clutch draw fluid from the
same reservoir.
Inspect the fluid level in the reservoir
regularly. It should be kept at MAX.
The level normally drops with
accumulated distance, a condition
associated with wear of brake and clutch
linings. If it is excessively low, have the
brake/clutch system inspected by an
2.5-liter engine
3.7-liter engine
Owner Maintenance
qAdding Brake/Clutch Fluid
WARNING
Be careful not to spill brake fluid on
yourself or on the engine:
Spilled brake fluid is dangerous. If it
gets in your eyes, they could be
seriously injured. If this happens,
immediately flush your eyes with
water and get medical attention.
Brake fluid spilled on a hot engine
could cause a fire.
If the brake/clutch fluid level is low,
have the brakes and clutch inspected:
Low brake/clutch fluid levels are
dangerous. Low levels could signal
brake lining wear or a brake system
leak. Your brakes could fail and
cause an accident.
Power Steering Fluid

qInspecting Power Steering Fluid
Level
CAUTION
To avoid damage to the power
steering pump, don't operate the
vehicle for long periods when the
power steering fluid level is low.
NOTE
Use specified power steering fluid (page 10-4).
Inspect the fluid level in the reservoir at

each engine oil change with the engine off
and cold. Add fluid if necessary; it does
not require periodic changing.
2.5-liter engine
If the fluid level is low, add fluid until it

reaches MAX.
Before adding fluid, thoroughly clean the
area around the cap.
CAUTION
Brake and clutch fluid will
damage painted surfaces. If brake
or clutch fluid does get on a
painted surface, wash it off with
water immediately.
Using nonspecified brake and
clutch fluids (page 10-4) will
damage the systems. Mixing
different fluids will also damage
them.
If the brake/clutch system
frequently requires new fluid,
consult an Authorized Mazda
Dealer.
3.7-liter engine
8-23
Form No.8AS3-EA-09E
Owner Maintenance
The level must be kept between MIN and
MAX.
Visually examine the lines and hoses for
leaks and damage.
If new fluid is required frequently, consult
Automatic Transaxle Fluid

(ATF)
qInspecting Automatic Transaxle
Fluid Level
The automatic transaxle fluid level should
be inspected regularly. Measure it as
described below.
2.5-liter engine
CAUTION
Always check the automatic
transaxle fluid level according to
the following procedure. If the
procedure is not done correctly,
the automatic transaxle fluid level
cannot be measured accurately
which could lead to automatic
transaxle damage.
A low fluid level can cause
transaxle slippage. Overfilling can
cause foaming, loss of fluid, and
transaxle malfunction.
Use only the specified fluid. A nonspecified fluid could result in
transaxle malfunction and failure.
1. Park on a level surface and set the
parking brake firmly.
2. Make sure there is no ATF leakage
from the ATF hose or the housing.
3. Shift the shift lever to the park position
(P), start the engine and warm it up.
CAUTION
Do not shift the shift lever while the
engine is warming up. If the ATF level
is extremely low, the automatic
transaxle could be damaged.
8-24
Form No.8AS3-EA-09E
Owner Maintenance
4. While the engine is still idling, pull out
the dipstick and wipe it clean, and then
put it back.
5. Check the ATF level. If there is no ATF
adhering 5 mm from the end of the
dipstick, add ATF.
CAUTION
If there is no ATF adhering to the
dipstick even after the engine has
been warmed up, do not drive the
vehicle. Otherwise, the automatic
transaxle could be damaged.
3.7-liter engine
The volume of fluid changes with
temperature. Fluid must be checked while
idling the engine without driving at
normal operating temperature.
CAUTION
Low fluid level causes transaxle
slippage. Overfilling can cause
foaming, loss of fluid, and
transaxle malfunction.
Use specified fluid (page 10-4). A
nonspecified fluid could result in
transaxle malfunction and failure.
6. Shift the shift lever to each range and

position, and make sure there is no
abnormality.

7. Drive the vehicle on city roads for

5 km (3.1 mile) or more.
2. Start the engine and depress the brake

pedal.

3. Move the shift lever through all ranges,

then set it at P.
9. Shift the shift lever to the park position

(P), check the ATF level while the
engine is idling, and make sure that the
ATF level is within the proper level. If
the ATF level is not within the proper
level, add ATF.
The proper fluid level is marked on the
dipstick as follows.
Make sure the brake pedal is applied

before shifting the shift lever:
Shifting the shift lever without first
depressing the brake pedal is
dangerous. The vehicle could move
suddenly and cause an accident.
Full
WARNING
4. With the engine still idling, pull out the

dipstick, wipe it clean, and put it back.
Low
8-25
Form No.8AS3-EA-09E
Owner Maintenance
5. Pull it out again.
The proper fluid level is marked on the
dipstick as follows.
Fully insert the dipstick. When adding

fluid, inspect with the dipstick to make
sure it doesn't pass full.
NOTE
Full
A
Low
Inspect the fluid on both sides of the dipstick in

a well lit area for an accurate reading.
Full
B
Low
Fluid hot scale A

When the vehicle has been driven and the
fluid is at normal operating temperature,
about 65C (150F), the level must be
between Full and Low.
Fluid cold scale B
When the engine has not been running
and the outside temperature is about 20C
(70F), the fluid level should be close to,
but not above, the bottom notch on the
dipstick.
CAUTION
Use the cold scale only as a
reference.
If outside temperature is lower
than about 20C (70F), start the
engine and inspect the fluid level
after the engine reaches operating
temperature.
If the vehicle has been driven for
an extended period at high speeds
or in city traffic in hot weather,
inspect the level only after
stopping the engine and allowing
the fluid to cool for 30 minutes.
8-26
Form No.8AS3-EA-09E
Owner Maintenance
Washer Fluid
Inspect fluid level in the washer fluid

reservoir; add fluid if necessary.
qInspecting Washer Fluid Level
WARNING
Use only windshield washer fluid or
plain water in the reservoir:
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the
windshield, affect your visibility, and
could result in an accident.
Using Washer Fluid Without Anti-freeze
Protection in Cold Weather:
Operating your vehicle in
temperatures below 4 degrees C (40
degrees F) using washer fluid without
anti-freeze protection is dangerous
as it could cause impaired windshield
vision and result in an accident. In
cold weather, always use washer
fluid with anti-freeze protection.
Use plain water if washer fluid is

unavailable.
But use only washer fluid in cold weather
to prevent it from freezing.
NOTE
State or local regulations may restrict the use
of volatile organic compounds (VOCs), which
are commonly used as anti-freeze agents in
washer fluid. A washer fluid with limited VOC
content should be used only if it provides
adequate freeze resistance for all regions and
climates in which the vehicle will be operated.
8-27
Form No.8AS3-EA-09E
Owner Maintenance
Body Lubrication
All moving points of the body, such as
door and hood hinges and locks, should
be lubricated each time the engine oil is
changed. Use a nonfreezing lubricant on
locks during cold weather.
Make sure the hood's secondary latch
keeps the hood from opening when the
primary latch is released.
Wiper Blades
CAUTION
Hot waxes applied by automatic
car washers have been known to
affect the wiper's ability to clean
windows.
To prevent damage to the wiper
blades, don't use gasoline,
kerosene, paint thinner, or other
solvents on or near them.
Contamination of either the windshield or
the blades with foreign matter can reduce
wiper effectiveness. Common sources are
insects, tree sap, and hot wax treatments
used by some commercial car washes.
If the blades are not wiping properly,
clean the window and blades with a good
cleaner or mild detergent; then rinse
thoroughly with clean water. Repeat if
necessary.
qReplacing Windshield Wiper Blades

When the wipers no longer clean well, the
blades are probably worn or cracked.
Replace them.
CAUTION
To prevent damage to the wiper arms
and other components, don't try to
sweep the wiper arm by hand.
NOTE
To prevent damage to the wiper arm blades
when raising both the driver and passenger
side wiper arms, raise the driver side wiper
arm first. Conversely, when setting down the
wiper arms, set the passenger side wiper arm
down first.
1. Raise the wiper arm.
8-28
Form No.8AS3-EA-09E
Owner Maintenance
2. Open the clip and slide the blade
assembly in the direction of the arrow.
4. Pull down the blade rubber and slide it

out of blade holder.
3. Tilt the blade assembly and remove it

from the arm.
5. Remove the metal stiffeners from each

blade rubber and install them in the
new blade.
CAUTION
To prevent damage to the windshield
let the wiper arm down easily, don't
let it slap down on the windshield.
8-29
Form No.8AS3-EA-09E
Owner Maintenance
CAUTION
Don't bend or discard the
stiffeners. You need to use them
again.
If the metal stiffeners are
switched, the blade's wiping
efficiency could be reduced.
So don't use the driver's side metal
stiffeners on the passenger's side,
or vice versa.
Be sure to reinstall the metal
stiffeners in the new blade rubber
so that the curve is the same as it
was in the old blade rubber.
6. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
8-30
Form No.8AS3-EA-09E
Owner Maintenance
Battery
WARNING
Wash hands after handling the battery and related accessories:
Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the State of California to cause cancer and reproductive harm.
Always wear eye protection when working near the battery:
Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID
which could cause blindness if splashed into your eyes. Also, hydrogen gas produced
during normal battery operation, could ignite and cause the battery to explode.
Wear eye protection and protective gloves to prevent contact with battery fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets in
eyes, or on the skin or clothing. If this happens, immediately flush your eyes with
water for 15 minutes or wash your skin thoroughly and get medical attention.
Always keep batteries out of the reach of children:
Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin.
Keep flames and sparks away from open battery cells and do not allow metal tools
to contact the positive ( ) or negative ( ) terminal of the battery when working
near a battery. Do not allow the positive ( ) terminal to contact the vehicle body:
exploding battery can cause serious burns and injuries. Keep all flames including
cigarettes and sparks away from open battery cells.
Keep all flames, including cigarettes, and sparks away from open battery cells:
exploding battery can cause serious burns and injuries.
8-31
Form No.8AS3-EA-09E
Owner Maintenance
qBattery Maintenance
Tires
For reasons of proper performance, safety,
and better fuel economy, always maintain
recommended tire inflation pressures and
stay within the recommended load limits
and weight distribution.
WARNING
To get the best service from a battery:

l Keep it securely mounted.
l Keep the top clean and dry.
l Keep terminals and connections clean,
tight, and coated with petroleum jelly
or terminal grease.
l Rinse off spilled electrolyte
immediately with a solution of water
and baking soda.
l If the vehicle will not be used for an
extended time, disconnect the battery
cables and charge the battery every six
weeks.
Using Different Tire Types:

Driving your vehicle with different
types of tires is dangerous. It could
cause poor handling and poor
braking; leading to loss of control.
Except for the limited use of the
temporary spare tire, use only the
same type tires (radial, bias-belted,
bias-type) on all four wheels.
Using Wrong-Sized Tires:
Using any other tire size than what is
specified for your Mazda (page 10-7)
is dangerous. It could seriously affect
ride, handling, ground clearance, tire
clearance, and speedometer
calibration. This could cause you to
have an accident. Use only tires that
are the correct size specified for your
Mazda.
qTire Inflation Pressure
WARNING
Always inflate the tires to the correct
pressure:
Overinflation or underinflation of
tires is dangerous. Adverse handling
or unexpected tire failure could result
in a serious accident.
Refer to specification charts on page
10-7.
8-32
Form No.8AS3-EA-09E
Owner Maintenance
Inspect all tire pressures monthly
(including the spare) when the tires are
cold. Maintain recommended pressures
for the best ride, handling, and minimum
tire wear.
qTire Rotation
To equalize tread wear, rotate the tires if
irregular wear develops. According to the
scheduled maintenance charts.Refer to
Scheduled Maintenance on page 8-3.
During rotation, inspect them for correct
balance.
Forward
Refer to the specification charts (page

10-7).
NOTE
l
Always check tire pressure when tires are

cold.
Warm tires normally exceed recommended
pressures. Don't release air from warm tires
to adjust the pressure.
Underinflation can cause reduced fuel
economy, uneven and accelerated tire wear,
and poor sealing of the tire bead, which
will deform the wheel and cause separation
of tire from rim.
Overinflation can produce a harsh ride,
uneven and accelerated tire wear, and a
greater possibility of damage from road
hazards.
Keep your tire pressure at the correct
levels. If one frequently needs inflating,
have it inspected.
Do not include (TEMPORARY USE ONLY)

spare tire in rotation.
Also, inspect them for uneven wear and

damage. Abnormal wear is usually caused
by one or a combination of the following:
l
l
l
l
Incorrect tire pressure

Improper wheel alignment
Out-of-balance wheel
Severe braking
After rotation, inflate all tire pressures to

specification (page 10-7) and inspect the
lug nuts for tightness.
CAUTION
Rotate unidirectional tires and radial
tires that have an asymmetrical tread
pattern or studs only from front to
rear, not from side to side. Tire
performance will be reduced if
rotated from side to side.
8-33
Form No.8AS3-EA-09E
Owner Maintenance
qReplacing a Tire
WARNING
Always use tires that are in good
condition:
Driving with worn tires is dangerous.
Reduced braking, steering, and
traction could result in an accident.
If a tire wears evenly, a wear indicator

will appear as a solid band across the
tread.
Replace the tire when this happens.
Tread wear indicator
CAUTION
(With Tire Pressure Monitoring
System)
damaged.
New tread
Worn tread
You should replace it before the band is

across the entire tread.
NOTE
NOTE
(With Tire Pressure Monitoring System)

l When tires with steel wire reinforcement in
the sidewalls are used, the system may not
function correctly even with a genuine
wheel.
Refer to System Error Activation on page
5-31.
l Be sure to install the tire pressure sensors
whenever tires or wheels are replaced.
Refer to Tires and Wheels on page 5-31.
Tires degrade over time, even when they are

not being used on the road. It is recommended
that tires generally be replaced when they are
6 years or older. Heat caused by hot climates
or frequent high loading conditions can
accelerate the aging process. You should
replace the spare tire when you replace the
other road tires due to the aging of the spare
tire. Regarding the manufacturing week and
year is indicated with 4 digit.
Refer to The tire labeling on page 9-22.
qTemporary Spare Tire

Inspect the temporary spare tire at least
monthly to make sure it's properly inflated
and stored.
NOTE
The temporary spare tire condition gradually
deteriorates even if it has not been used.
8-34
Form No.8AS3-EA-09E
Owner Maintenance
The temporary spare tire is easier to
handle because of its construction which
is lighter and smaller than a conventional
tire. This tire should be used only for an
emergency and only for a short distance.
Use the temporary spare tire only until the
conventional tire is repaired, which should
be as soon as possible.
Maintain its pressure at 420 kPa (4.2
kgf/cm2 or bar, 60 psi).
CAUTION
Do not use your temporary spare
tire rim with a snow tire or a
conventional tire. Neither will
properly fit and could damage
both tire and rim.
The temporary spare tire has a
tread life of less than 5,000 km
(3,000 miles). The tread life may
be shorter depending on driving
conditions.
The temporary spare tire is for
limited use, however, if the tread
wear solid-band indicator
appears, replace the tire with the
same type of temporary spare
(page 8-34).
NOTE
Tires degrade over time, even when they are
not being used on the road. It is recommended
that tires generally be replaced when they are
6 years or older. Heat caused by hot climates
or frequent high loading conditions can
accelerate the aging process. You should
replace the spare tire when you replace the
other road tires due to the aging of the spare
tire. Regarding the manufacturing week and
year is indicated with 4 digit.
Refer to The tire labeling on page 9-22.
qReplacing a Wheel
WARNING
Always use wheels of the correct size
on your vehicle:
Using a wrong-sized wheel is
dangerous. Braking and handling
could be affected, leading to loss of
control and an accident.
CAUTION
A wrong-sized wheel may
adversely affect:
Tire fit
Wheel and bearing life
Ground clearance
Speedometer calibration
Headlight aim
Bumper height
Tire Pressure Monitoring
System
(With Tire Pressure Monitoring
System)
When replacing/repairing the
tires or wheels or both, have the
work done by an Authorized
Mazda Dealer, or the tire
pressure sensors may be
damaged.
The wheels equipped on your
Mazda are specially designed
for installation of the tire
pressure sensors. Do not use
non-genuine wheels, otherwise
it may not be possible to install
the tire pressure sensors.
NOTE
Be sure to install the tire pressure sensors
whenever tires or wheels are replaced. Refer to
Tires and Wheels on page 5-31.
8-35
Form No.8AS3-EA-09E
Owner Maintenance
When replacing a wheel, make sure the
new one is the same as the original factory
wheel in diameter, rim width, and offset.
Proper tire balancing provides the best
riding comfort and helps reduce tread
wear. Out-of-balance tires can cause
vibration and uneven wear, such as
cupping and flat spots.
8-36
Form No.8AS3-EA-09E
Owner Maintenance
Light Bulbs
Overhead light/Map light (Front)
Overhead light (Rear)
Front turn signal lights/

Parking lights
Front side marker lights
Head lights (High beam)
Fog lights
License plate lights

Reverse lights
Head lights (Low beam)
Rear side marker lights

Brake lights/Tail lights
Rear turn signal lights
Some models.
8-37
Form No.8AS3-EA-09E
Owner Maintenance
WARNING
Do not replace the xenon fusion bulbs
yourself:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement
is necessary.
Never touch the glass portion of a
halogen bulb with your bare hands and
always wear eye protection when
handling or working around the bulbs:
When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it
will explode and serious injuries
could be caused by the flying glass.
If the glass portion is touched with
bare hands, body oil could cause the
bulb to overheat and explode when
lit.
Always keep halogen bulbs out of the
reach of children:
Playing with a halogen bulb is
dangerous. Serious injuries could be
caused by dropping a halogen bulb
or breaking it some other way.
8-38
Form No.8AS3-EA-09E
qReplacing Exterior Light Bulbs

Replacing a headlight bulb
High-beam bulb
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Remove the attachment bolts and set
the coolant reservoir a side before
replacing the right bulb.
3. Disconnect the electrical connector

from the bulb by pressing the tab on
the connector with your finger and
pulling the connector downward.
4. Turn the socket and bulb assembly
counterclockwise and remove it.
Carefully remove the bulb from its
socket in the reflector by gently pulling
it straight backward out of the socket.
Owner Maintenance
5. Install the new bulb in the reverse order
of removal.
6. Install the coolant reservoir. If you are
unsure of how tight the bolts should be,
have them inspected at an Authorized
Mazda Dealer.
3. Turn the screws and the center section

of the plastic retainers
counterclockwise and remove them,
then partially peel back the mudguard.
Removal
Bolt tightening torque

7.810.8
(0.81.1, 5.88.0)
Nm (kgfm, ftlbf)
NOTE
l
Installation
To replace the bulb, contact an Authorized

Mazda Dealer.
If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.
Use the protective cover and carton for the
replacement bulb to dispose of the old bulb
promptly and out of the reach of children.
Low-beam bulb
(Xenon fusion bulb)
You cannot replace the low beam bulbs by
yourself.
The bulbs must be replaced at an
(Halogen bulbs)
1. If you are changing the right headlight
bulb, start the engine, turn the steering
wheel all the way to the right, and turn
off engine. If you are changing the left
headlight bulb, turn the steering wheel
to the left.
4. Turn the cover counterclockwise and

remove it.

8-39
Form No.8AS3-EA-09E
Owner Maintenance
5. Detach the electrical connector from
the bulb by pulling it to the rear.
NOTE
l

Mazda Dealer.
before being used.
Fog light bulbs

6. Unhook the bulb retaining spring.
7. Swing the retaining spring out and

away to free the headlight bulb.
8. Carefully remove the headlight bulb
from the socket by pulling it straight
back.
9. Replace the bulb.
10. Install the new bulb in the reverse
order of removal.
8-40
Some models.
Form No.8AS3-EA-09E

of counterclockwise and remove them,
Owner Maintenance
3. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector downward.
NOTE
l

Mazda Dealer.
before being used.
Front side marker lights
4. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.
1. If you are changing the right sidemaker light, start the engine, turn the
steering wheel all the way to the right,
and turn off the engine. If you are
changing the left side-maker light, turn
the steering wheel to the left.
of the plastic retainers
Removal
Installation

of removal.
8-41
Form No.8AS3-EA-09E
Owner Maintenance
3. Turn the bolt, the screws and the center
section of the plastic retainers
Removal
Installation

5. Disconnect the bulb from the socket.
6. Install the new side turn signal unit in

the reverse order of removal.

Front turn signal lights/Parking lights
1. If you are changing the right headlight

bulb, start the engine, turn the steering
wheel all the way to the right, and turn
off engine. If you are changing the left
headlight bulb, turn the steering wheel
to the left.
2. Make sure the ignition switch is turned
off and the headlight switch is off.
8-42
Form No.8AS3-EA-09E
Owner Maintenance
of removal.
High-mount brake light, Ground

illumination lights
Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.
Brake lights/Taillights (Rear side
marker lights)
With LED bulb
Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

of removal.
NOTE
NOTE
LED bulb replacement is not possible. The

rear combination component must be replaced.

Mazda Dealer.
With Non-LED bulb
1. 1.Pull the center section of the plastic

retainer and remove the retainers and
partially open the trunk side trim.
1. Pull the center section of the plastic

retainer and remove the retainers and
partially open the trunk side trim.
Removal
Removal
Installation
Installation


8-43
Form No.8AS3-EA-09E
Owner Maintenance

of removal.

of removal.
NOTE

Mazda Dealer.
Reverse lights
retainer and remove the retainers, then
partially peel back the trunk rear trim.

retainer and remove the retainers, then
partially peel back the trunk rear trim.
Removal
Removal
Installation
Installation

8-44
Form No.8AS3-EA-09E
Owner Maintenance
Edge

of removal.
Courtesy lights
qReplacing Interior Light Bulbs

Overhead light/Map light (Front),
Overhead light (Rear), Courtesy lights,
Vanity mirror lights
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
flathead screwdriver.
2. Disconnect the bulb by pulling it out.
Overhead light/Map light (Front)
Edge

of removal.
8-45
Form No.8AS3-EA-09E
Owner Maintenance
Trunk light
1. Press both sides of the lens cap to
remove it.
Fuses
Your vehicle's electrical system is
protected by fuses.
2. Disconnect the bulb by pulling it out.

If any lights, accessories, or controls don't
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
qFuse Replacement
of removal.
Replacing the fuses on the driver's side

kick-panel
If the electrical system does not work,
first inspect the fuses on the driver's side
kick-panel.
1. Turn off the ignition switch and other
switches.
2. Open the fuse panel cover by sliding
the cover straight back toward you.
CAUTION
Pulling the cover off sideways may
break the retaining tabs off.
8-46
Form No.8AS3-EA-09E
Owner Maintenance
3. Pull the fuse straight out with the fuse
puller provided on the fuse block
located in the engine compartment.
Replacing the fuses under the hood

If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
4. Inspect the fuse and replace it if it's

blown.
3. If any fuse but the MAIN fuse is

blown, replace it with a new one of the
same amperage rating.
Normal
Blown
5. Insert a new fuse of the same amperage

rating, and make sure it fits tightly. If it
does not fit tightly, have an expert
install it. We recommend an
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or CIGAR circuit.
Normal
Blown
CAUTION
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
8-47
Form No.8AS3-EA-09E
Owner Maintenance
4. Install the right side of the fuse block
cover first as shown the figure.
WARNING
Do not replace the main fuse by
yourself. Have an Authorized Mazda
Dealer perform the replacement:
Replacing the fuse by yourself is
dangerous because the MAIN fuse is
a high current fuse. Incorrect
replacement could cause an electrical
shock or a short circuit resulting in a
fire.
8-48
Form No.8AS3-EA-09E
Owner Maintenance
qFuse Panel Description
Fuse block (Engine compartment)
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
M.DEF
ST SIG
ABS SOL
P.WIND (P)
P.SEAT (P)
SUN ROOF
TAIL
P.OUTLET (R)
AUDIO
ABS MOTOR
P.WIND (D)
DEFOG
SEAT HEAT
A/C
FOG
BLOWER 2
FAN
FUSE
RATING
10 A
5A
30 A
25 A
30 A
15 A
15 A
15 A
30 A
60 A
40 A
40 A
20 A
10 A
15 A
15 A
60 A
PROTECTED COMPONENT
Mirror defroster
Starter sig
ABS, DSC
Power window
Power seat
Moonroof
BCM, Tail lamp
Accessory sockets
Audio system (Bose Sound System-equipped model)
ABS, DSC
Power window
Rear window defroster
Seat heat
Air conditioner
Fog lights
Blower motor
Cooling fan
Some models.
Form No.8AS3-EA-09E
8-49
Owner Maintenance
DESCRIPTION
18
19
20
21
22
23
24
25
P.SEAT (D)
BTN
IG KEY2
BLOWER
FUEL PUMP
ENGINE2
EGI INJ
PCM
26
ENGINE
27
28
29
30
31
32
33
34
35
36
37
38
39
40
IG
TCM
ESCL
IG KEY1
MAIN
DRL
HAZARD
ENG+B
STOP
HORN
HEAD HI RH
HEAD LO RH
HEAD HI LH
HEAD LO LH
FUSE
RATING
30 A
30 A
40 A
40 A
25 A
15 A
15 A
10 A
10 A*1
20 A*2
20 A
20 A
10 A
40 A
125 A
20 A
10 A
10 A
10 A
15 A
15 A
10 A
15 A
10 A
*1 2.5-liter engine
*2 3.7-liter engine
8-50
Some models.
Form No.8AS3-EA-09E
PROTECTED COMPONENT
Power seat
For protection of various circuits
Starting system
Blower motor
Fuel pump
Engine control system
Injector
TCM
Electronic steering lock
For protection of all circuits
DRL
Hazard warning flashers
PCM
Brake lights
Horn
Headlight-high beam (Right)
Headlight-low beam (Right)
Headlight-high beam (Left)
Headlight-low beam (Left)
Owner Maintenance
Fuse block (Passenger's side)
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
P.WIND
METER IG
ILLUMI
MIRROR
SAS
INT, LOCK/SHIFT
HEGO
A/C
P.OUTLET/CIGAR
D.LOOK
ENGINE IG
WIPER
ROOM
SPARE
SPARE
SPARE
FUSE
RATING
30 A
15 A
7.5 A
5A
5A
5A
5A
10 A
15 A
25 A
15 A
25 A
15 A
PROTECTED COMPONENT
Power window
BCM, Illumination
Power control mirror
Air bag, ABS
AT shift
Power control mirror

Air conditioner
Lighter
BCM, Door lock motor
Windshield wiper and washer
Interior lights
Some models.
Form No.8AS3-EA-09E
8-51
Appearance Care
How to Minimize
Environmental Paint Damage
The paintwork on your Mazda represents
the latest technical developments in
composition and methods of application.
Environmental hazards, however, can
harm the paint's protective properties, if
proper care is not taken.
Here are some examples of possible
damage, with tips on how to prevent
them.
qEtching Caused by Acid Rain or

Industrial Fallout
Occurrence
Industrial pollutants and vehicle emissions
drift into the air and mix with rain or dew
to form acids. These acids can settle on a
vehicle's finish. As the water evaporates,
the acid becomes concentrated and can
damage the finish.
And the longer the acid remains on the
surface, the greater the chance is for
damage.
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you suspect that acid rain has settled on
your vehicle's finish.
qDamage Caused by Bird

Dropping, Insects, or Tree Sap
Occurrence
Bird droppings contain acids. If these
aren't removed they can eat away the clear
and color base coat of the vehicle's
paintwork.
When insects stick to the paint surface
and decompose, corrosive compounds
form. These can erode the clear and color
base coat of the vehicle's paintwork if
they are not removed.
Tree sap will harden and adhere
permanently to the paint finish. If you
scratch the sap off while it is hard, some
vehicle paint could come off with it.
Prevention
It is necessary to have your Mazda
washed and waxed to preserve its finish
according to the instructions in this
section. This should be done as soon as
possible.
Bird droppings can be removed with a
soft sponge and water. If you are traveling
and these are not available, a moistened
tissue may also take care of the problem.
The cleaned area should be waxed
according to the instructions in this
section.
Insects and tree sap are best removed with
a soft sponge and water or a commercially
available chemical cleaner.
Another method is to cover the affected
area with dampened newspaper for one to
two hours. After removing the newspaper,
rinse off the loosened debris with water.
8-52
Form No.8AS3-EA-09E
Appearance Care
qWater Marks
Occurrence
Rain, fog, dew, and even tap water can
contain harmful minerals such as salt and
lime. If moisture containing these
minerals settles on the vehicle and
evaporates, the minerals will concentrate
and harden to form white rings. The rings
can damage your vehicle's finish.
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you find water marks on your vehicle's
finish.
NOTE
l
The paint chipping zone varies with the

speed of the vehicle. For example, when
traveling at 90 km/h (56 mph), the paint
chipping zone is 50 m (164 ft).
In low temperatures a vehicle's finish
hardens. This increases the chance of paint
chipping.
Chipped paint can lead to rust forming on
your Mazda. Before this happens, repair the
damage by using Mazda touch-up paint
according to the instructions in this section.
Failure to repair the affected area could
lead to serious rusting and expensive
repairs.
qPaint Chipping
Occurrence
Paint chipping occurs when gravel thrown
in the air by another vehicle's tires hits
your vehicle.
How to avoid paint chipping
Keeping a safe distance between you and
the vehicle ahead reduces the chances of
having your paint chipped by flying
gravel.
8-53
Form No.8AS3-EA-09E
Appearance Care
Exterior Care
Follow all label and container directions
when using a chemical cleaner or polish.
Read all warnings and cautions.
qMaintaining the Finish

Washing
CAUTION
When the wiper lever is in the AUTO
position and the ignition switch is in
the ON position, the wipers may
move automatically in the following
cases:
sensor is touched.
sensor is wiped with a cloth.
If the windshield is struck with a
hand or other object.
If the rain sensor is struck with a
hand or other object from inside
the vehicle.
Be careful not to pinch hands or
fingers as it may cause injury, or
damage the wipers. When washing
or servicing your Mazda, make sure
the wiper lever is in the OFF position.
To help protect the finish from rust and
deterioration, wash your Mazda
thoroughly and frequently, at least once a
month, with lukewarm or cold water.
If the vehicle is washed improperly, the
paint surface could be scratched. Here are
some examples of how scratching could
occur.
8-54
Form No.8AS3-EA-09E
Scratches occur on the paint surface

when:
l The vehicle is washed without first
rinsing off dirt and other foreign
matter.
l The vehicle is washed with a rough,
dry, or dirty cloth.
l The vehicle is washed at a car wash
that uses brushes that are dirty or too
stiff.
l Cleansers or wax containing abrasives
are used.
NOTE
l
Mazda is not responsible for scratches

caused by automatic car washes or
improper washing.
Scratches are more noticeable on vehicles
with darker paint finishes.
To minimize scratches on the vehicle's

paint finish:
l Rinse off any dirt or other foreign
matter using lukewarm or cold water
before washing.
l Use plenty of lukewarm or cold water
and a soft cloth when washing the
vehicle. Do not use a nylon cloth.
l Rub gently when washing or drying the
vehicle.
l Take your vehicle only to a car wash
that keeps its brushes well maintained.
l Don't use abrasive cleansers or wax
that contain abrasives.
CAUTION
Don't use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or anodized
aluminum parts. This may damage
the protective coating; also, cleaners
and detergents may discolor or
deteriorate the paint.
Appearance Care
Pay special attention to removing salt,
dirt, mud, and other foreign material from
the underside of the fenders, and make
sure the drain holes in the lower edges of
the doors and rocker panels are clean.
2. Use a good grade of natural wax for

metallic, mica, and solid colors.
3. When waxing, coat evenly with the
sponge supplied or a soft cloth.
4. Wipe off the wax with a soft cloth.
Insects, tar, tree sap, bird droppings,

industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.
Thoroughly rinse off all soap with
lukewarm or cold water. Don't allow soap
to dry on the finish.
After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.
NOTE
A spot remover to remove oil, tar, and similar
materials will usually also take off the wax.
Rewax these areas even if the rest of the
vehicle doesn't need it.
qRepairing Damage to the Finish

Deep scratches or chips on the finish
should be repaired promptly. Exposed
metal quickly rusts and can lead to major
repairs.
CAUTION
WARNING
brake performance is normal:
been affected.
Waxing
Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle before
waxing it. In addition to the vehicle body,
wax the metal trim to maintain its luster.
1. Use wax which contains no abrasives.
Waxes containing abrasive will remove
paint and could damage bright metal
parts.
If your Mazda is damaged and needs

metal parts repaired or replaced,
make sure the body shop applies
anti-corrosion materials to all parts,
both repaired and new. This will
prevent them from rusting.
qBright-Metal Maintenance
l
Use tar remover to remove road tar and

insects. Never do this with a knife or
similar tool.
To prevent corrosion on bright-metal
surfaces, apply wax or chrome
preservative and rub it to a high luster.
During cold weather or in coastal areas,
cover bright-metal parts with a coating
of wax or preservative heavier than
usual. It would also help to coat them
with noncorrosive petroleum jelly or
some other protective compound.
8-55
Form No.8AS3-EA-09E
Appearance Care
WARNING
CAUTION
Don't use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or anodized
aluminum parts. This may result in
damage to the protective coating and
cause discoloration or paint
deterioration.
qUnderbody Maintenance
Road chemicals and salt used for ice and
snow removal and solvents used for dust
control may collect on the underbody. If
not removed, they will speed up rusting
and deterioration of such underbody parts
as fuel lines, frame, floor pan, and exhaust
system, even though these parts may be
coated with anti-corrosive material.
Thoroughly flush the underbody and
wheel housings with lukewarm or cold
water at the end of each winter. Try also
to do this every month.
Pay special attention to these areas
because they easily hide mud and dirt. It
will do more harm than good to wet
down the road grime without removing
it.
The lower edges of doors, rocker panels,
and frame members have drain holes that
should not be clogged. Water trapped
there will cause rusting.
8-56
Some models.
Form No.8AS3-EA-09E

brake performance is normal:
been affected.
qAluminum Wheel Maintenance

A protective coating is provided over the
aluminum wheels. Special care is needed
to protect this coating.
NOTE
Do not use a wire brush or any abrasive
cleaner, polishing compound, or solvent on
aluminum wheels. They may damage the
coating.
l Only use a mild soap or neutral detergent
and always use a sponge or soft cloth to
clean the wheels.
Rinse thoroughly with lukewarm or cold
water. Also, be sure to clean the wheels
after driving on dusty or salted roads. This
helps prevent corrosion.
l Avoid washing your vehicle in an automatic
car wash that uses high-speed or hard
brushes.
l If your aluminum wheels lose luster, wax
the wheels.
(With Tire Pressure Monitoring System)
Check special requirements for Tire Pressure
Monitoring System.
Refer to Tires and Wheels on page 5-31.
l
Appearance Care
Interior Care
qDashboard Precautions
Prevent caustic solutions such as perfume
and cosmetic oils from contacting the
dashboard. They'll damage and discolor it.
If these solutions get on the dashboard,
wipe them off immediately.
CAUTION
Do not use glazing agents.
Glazing agents contain ingredients
which may cause discoloration,
wrinkling, cracks and peeling.
qCleaning the Upholstery and

Interior Trim
Vinyl
Remove dust and loose dirt from vinyl
with a whisk broom or vacuum cleaner.
Clean vinyl with a leather-and-vinyl
cleaner.
Leather
Real leather is not uniform and may have

scars, scratches, and wrinkles. Clean it
with a leather cleaner or mild soap.
Wipe it with a damp soft cloth; then dry
and buff it with a dry soft cloth.
To keep the fabric looking clean and

fresh, take care of it. Otherwise its color
will be affected, it can be stained easily,
and its fire-resistance may be reduced.
CAUTION
Use only recommended cleaners and
procedures. Others may affect
appearance and fire-resistance.
qCleaning the Lap/Shoulder Belt

Webbing
Clean the webbing with a mild soap
solution recommended for upholstery or
carpets. Follow instructions. Don't bleach
or dye the webbing; this may weaken it.
After cleaning the belts, thoroughly dry
the belt webbing and make sure there is
no remaining moisture before retracting
them.
WARNING
Have an Authorized Mazda Dealer
replace damaged seat belts
immediately:
Using damaged seat belts is
dangerous. In a collision, damaged
belts cannot provide adequate
protection.
Fabric
Remove dust and loose dirt from fabric
with a whisk broom or vacuum cleaner.
Clean it with a mild soap solution good
for upholstery and carpets. Remove fresh
spots immediately with a fabric spot
cleaner.
Some models.
Form No.8AS3-EA-09E
8-57
Appearance Care
qCleaning the Window Interiors
If the windows become covered with an
oily, greasy, or waxy film, clean them
with glass cleaner. Follow the directions
on the container.
CAUTION
Don't scrape or scratch the inside
of the rear window. You may
damage the rear window defroster
grid.
When washing the inside rear
window, use a soft cloth
dampened in lukewarm water,
gently wiping the antenna lines.
Use of glass cleaning products
could damage the antenna.
8-58
Form No.8AS3-EA-09E
Customer Information and Reporting

Safety Defects
Important consumer information including warranties and add-on equipment.
Customer Assistance ............................... 9-2

Customer Assistance (U.S.A.) ............ 9-2
Customer Assistance (Canada) ........... 9-6
Customer Assistance (Puerto Rico) .... 9-9
Customer Assistance (Mexico) ......... 9-10
Reporting Safety Defects ....................... 9-41

Reporting Safety Defects (U.S.A.) .... 9-41
Reporting Safety Defects (Canada) ... 9-42
Service Publications .............................. 9-43
Service Publications .......................... 9-43
Mazda Importer/Distributors ............... 9-12

Importer/Distributor .......................... 9-12
Distributor in Each Area ................... 9-12
Warranty ................................................ 9-14
Warranties for Your Mazda ............... 9-14
Outside the United States .................. 9-15
Outside Canada ................................. 9-16
Registering Your Vehicle in A Foreign
Country (Except United States and
Canada) ............................................. 9-17
Add-On Non-Genuine Parts and
Accessories ....................................... 9-18
Cell Phones ............................................. 9-19
Cell Phones Warning ......................... 9-19
Uniform Tire Quality Grading System
(UTQGS) ................................................ 9-20
Uniform Tire Quality Grading System
(UTQGS) .......................................... 9-20
Tire Information (U.S.A.) ..................... 9-22
Tire Labeling ..................................... 9-22
Location of the Tire Label
(Placard) ............................................ 9-28
Tire Maintenance .............................. 9-31
Vehicle Loading ................................ 9-34
Steps for Determining the Correct Load
Limit: ................................................ 9-40
9-1
Form No.8AS3-EA-09E
Customer Assistance
Customer Assistance (U.S.A.)
Your complete and permanent satisfaction is our business. We are here to serve you. All
Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle
in top condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
qSTEP 1: Contact Your Mazda Dealer

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,
SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL
MANAGER of the dealership or the OWNER.
qSTEP 2: Contact Mazda North American Operations

If for any reason you feel the need for further assistance after contacting your dealership
management, you can reach Mazda North American Operations by one of the following
ways.
Log on: at www.mazdaUSA.com
Answers to many questions, including how to locate or contact a local Mazda dealership in
the U.S., can be found here.
E-mail: click on Contact Us located on the Inside Mazda tab, or at the bottom of the
page at www.mazdaUSA.com
By phone at: 1 (800) 222-5500
By letter at:
Attn: Customer Assistance
7755 Irvine Center Drive
Irvine, CA 92618-2922
P.O. Box 19734
Irvine, CA 92623-9734
In order to serve you efficiently and effectively, please help us by providing the following
information:
1. Your name, address, and telephone number
9-2
Form No.8AS3-EA-09E
Customer Assistance
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
If you live outside the U.S.A., please contact your nearest Mazda Distributor.
qSTEP 3: Contact Better Business Bureau (BBB)

Mazda North American Operations realizes that mutual agreement on some issues may not
be possible. As a final step to ensure that your concerns are being fairly considered, Mazda
North American Operations has agreed to participate in a dispute settlement program
administered by the Better Business Bureau (BBB) system, at no cost to you the consumer.
BBB AUTO LINE works with consumers and the manufacturer in an attempt to reach a
mutually acceptable resolution of any warranty related concerns. If the BBB is not able to
facilitate a settlement they will provide an informal hearing before an arbitrator.
You are required to resort to BBB AUTO LINE before exercising rights or seeking
remedies under the Federal Magnuson-Moss Warranty Act, 15 U.S.C. 2301 et seq. To the
extent permitted by the applicable state Lemon Law, you are also required to resort to
BBB AUTO LINE before exercising any rights or seeking remedies under the Lemon
Law. If you choose to seek remedies that are not created by the Magnuson-Moss Warranty
Act or the applicable state Lemon Law, you are not required to first use BBB AUTO
LINE.
The whole process normally takes 40 days or less. The arbitration decision is not binding
on you or Mazda else you accept the decision. For more information about BBB AUTO
LINE, including current eligibility standards, please call 1-800-955-5100 or visit the BBB
website at www.lemonlaw.bbb.org.
Being truly committed to customer satisfaction is more than a phrase with Mazda. We hope
to satisfy every customer directly, but if there is ever a question about our decision, Mazda
believes in providing a fast, fair and free method such as the BBB AUTO LINE to ensure
Mazda delivers on our commitment to do the right thing for our customers!
9-3
Form No.8AS3-EA-09E
Customer Assistance
qCalifornia Customers
1. Mazda North American Operations participates in BBB AUTO LINE, a mediation/
arbitration program administered by the Council of Better Business Bureaus [4200
Wilson Boulevard, Arlington, Virginia 22203] through local Better Business Bureaus.
BBB AUTO LINE and Mazda have been certified by the Arbitration Certification
Program of the California Department of Consumer Affairs.
2. If you have a problem arising under a Mazda written warranty, we encourage you to
bring it to our attention. If we are unable to resolve it, you may file a claim with BBB
AUTO LINE. Claims must be filed with BBB AUTO LINE within six (6) months after
the expiration of the warranty.
3. To file a claim with BBB AUTO LINE, call 1-800-955-5100. There is no charge for the
call.
4. In order to file a claim with BBB AUTO LINE, you will have to provide your name and
address, the brand name and vehicle identification number (VIN) of your vehicle, and a
statement of the nature of your problem or complaint. You will also be asked to provide:
the approximate date of your acquisition of the vehicle, the vehicle's current mileage, the
approximate date and mileage at the time any problem(s) were first brought to the
attention of Mazda or one of our dealers, and a statement of the relief you are seeking.
5. BBB AUTO LINE staff may try to help resolve your dispute through mediation. If
mediation is not successful, or if you do not wish to participate in mediation, claims
within the program's jurisdiction may be presented to an arbitrator at an informal
hearing. The arbitrator's decision should ordinarily be issued within 40 days from the
time your complaint is filed; there may be a delay of 7 days if you did not first contact
Mazda about your problem, or a delay of up to 30 days if the arbitrator requests an
inspection/report by an impartial technical expert or further investigation and report by
BBB AUTO LINE.
6. You are required to use BBB AUTO LINE before asserting in court any rights or
remedies conferred by California Civil Code Section 1793.22. You are also required to
use BBB AUTO LINE before exercising rights or seeking remedies created by Title I of
the Magnuson-Moss Warranty Act, 15 U.S.C. sec. 2301 et seq. If you choose to seek
redress by pursuing rights and remedies not created by California Civil Code Section
1793.22 or Title I of the Magnuson-Moss Warranty Act, resort to BBB AUTO LINE is
not required by those statutes.
9-4
Form No.8AS3-EA-09E
Customer Assistance
7. California Civil Code Section 1793.2 (d) requires that, if Mazda or its representative is
unable to repair a new motor vehicle to conform to the vehicle's applicable express
warranty after a reasonable number of attempts, Mazda may be required to replace or
repurchase the vehicle. California Civil Code Section 1793.22 (b) creates a presumption
that Mazda has had a reasonable number of attempts to conform the vehicle to its
applicable express warranties if, within 18 months from delivery to the buyer or 18,000
miles on the vehicle's odometer, whichever occurs first, one or more of the following
occurs:
l The same nonconformity [a failure to conform to the written warranty that
substantially impairs the use, value or safety of the vehicle] results in a condition that
is likely to cause death or serious bodily injury if the vehicle is driven AND the
nonconformity has been subject to repair two or more times by Mazda or its agents
AND the buyer or lessee has directly notified Mazda of the need for the repair of the
nonconformity; OR
l The same nonconformity has been subject to repair 4 or more times by Mazda or its
agents AND the buyer has notified Mazda of the need for the repair of the
nonconformity; OR
l The vehicle is out of service by reason of repair of nonconformities by Mazda or its
agents for a cumulative total of more than 30 calendar days after delivery of the
vehicle to the buyer.
NOTICE TO Mazda AS REQUIRED ABOVE SHALL BE SENT TO THE
FOLLOWING ADDRESS:
Irvine, CA 92618
ATTN: Customer Mediation
8. The following remedies may be sought in BBB AUTO LINE: repairs, reimbursement
for money paid to repair a vehicle or other expenses incurred as result of a vehicle
nonconformity, repurchase or replacement of your vehicle, and compensation for
damages and remedies available under Mazda's written warranty or applicable law.
9. The following remedies may not be sought in BBB AUTO LINE: punitive or multiple
damages, attorneys' fees, or consequential damages other than as provided in California
Civil Code Section 1794 (a) and (b).
10. You may reject the decision issued by a BBB AUTO LINE arbitrator. If you reject the
decision, you will be free to pursue further legal action. The arbitrator's decision and
any findings will be admissible in a court action.
11. If you accept the arbitrator's decision, Mazda will be bound by the decision, and will
comply with the decision within a reasonable time not to exceed 30 days after we
receive notice of your acceptance of the decision.
12. Please call BBB AUTO LINE at 1-800-955-5100 for further details about the program.
9-5
Form No.8AS3-EA-09E
Customer Assistance
Customer Assistance (Canada)
qSatisfaction Review Process
Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized
Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In
our experience, any questions, problems, or complaints regarding the operation of your
Mazda or any other general service transactions are most effectively resolved by your
dealer. If the cause of your dissatisfaction cannot adequately be addressed by normal
dealership procedures, we recommend that you take the following steps:
qSTEP 1: Contact the Mazda Dealer

Discuss the matter with a member of dealership management. If the Service Manager has
already reviewed your concerns, contact the owner of the dealership or its General
Manager.
qSTEP 2: Contact the Mazda Regional Office

If you feel that you still require assistance, ask the dealer Service Manager to arrange for
you to meet the local Mazda Service Representative. If more expedient, contact Mazda
Canada Inc.Regional Office nearest you for such arrangements. Regional Office address
and phone numbers are shown (page 9-8).
qSTEP 3: Contact the Mazda Customer Relations Department

If still not substantially satisfied, contact the Customer Relations Department, Mazda
Canada Inc., 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL: 1 (800)
263-4680.
Provide the Department with the following information:
1. Your name, address and telephone number
3. Vehicle Identification Number (VIN). Refer to the Vehicle Identification Labels page
of section 10 of this manual for the location of the VIN.
4. Purchase date
5. Present odometer reading
7. The nature of your problem and/or cause of dissatisfaction
The Department, in cooperation with the local Mazda Service Representative, will review
the case to determine if everything possible has been done to ensure your satisfaction.
9-6
Form No.8AS3-EA-09E
Customer Assistance
Please recognize that the resolution of service problems in most cases requires the use of
your Mazda dealer's service facilities, personnel and equipment. We urge you to follow the
above three steps in sequence for most effective results.
qMediation/Arbitration Program
Occasionally a customer concern cannot be resolved through Mazda's Customer
Satisfaction Program. If after exhausting the procedures in this manual your concern is still
not resolved, you have another option.
Mazda Canada Inc. participates in an arbitration program administered by the
Canadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you about
how your concern may be reviewed and resolved by an independent third party through
binding arbitration.
Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers.
Mazda's participation in CAMVAP makes a valuable contribution to our achieving that
goal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as the
award is binding on both you and Mazda Canada Inc.
qCanadian Motor Vehicle Arbitration Plan (CAMVAP)

If a specific item of concern arises, where a solution cannot be reached between an owner,
Mazda, and/or one of it's dealers (that all parties cannot agree upon), the owner may wish
to use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
CAMVAP uses the services of Provincial Administrators to assist consumers in scheduling
and preparing for their arbitration hearings. However, before you can proceed with
CAMVAP you must follow your Mazda dispute resolution process as outlined previously.
9-7
Form No.8AS3-EA-09E
Customer Assistance
CAMVAP is fully implemented in all provinces and territories.
Consumers wishing to obtain further information about the Program should contact the
Provincial Administrator at 1 (800) 207-0685, or by contacting the
Canadian Motor Vehicle Arbitration Plan Office at:
Canadian Motor Vehicle Arbitration Plan
235 Yorkland Boulevard, suite 300
North York, Ontario
M2J 4Y8
http://camvap.ca
Provincial Administrators may be reached locally as listed below:
Province/Territory
British Columbia & Yukon Territories
Alberta & Northwest Territories
Saskatchewan
Manitoba
Ontario
Atlantic Canada
Quebec
CAMVAP Number
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
qRegional Offices
REGIONAL OFFICES
MAZDA CANADA INC.
WESTERN REGION
8171 ACKROYD ROAD
SUITE 2000
RICHMOND B.C.
V6X 3K1
(604) 303-5670
MAZDA CANADA INC.
CENTRAL/ATLANTIC REGION
55 VOGELL ROAD,
RICHMOND HILL,
ONTARIO, L4B 3K5
(905) 787-7000
MAZDA CANADA INC.
QUEBEC REGION
6111 ROUTE TRANS
CANADIENNE
POINTE CLAIRE, QUEBEC
H9R 5A5
(514) 694-6390
9-8
Form No.8AS3-EA-09E
AREAS COVERED
ALBERTA,
BRITISH COLUMBIA,
MANITOBA,
SASKATCHEWAN,
YUKON
ONTARIO
QUEBEC,
NEW BRUNSWICK,
NOVA SCOTIA,
PRINCE EDWARD ISLAND,
NEWFOUNDLAND
Customer Assistance
Customer Assistance (Puerto Rico)
Your complete and permanent satisfaction is our business. That is why all Authorized
Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top
condition.
qSTEP 1
address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,
SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL
MANAGER of the dealership or the OWNER.
qSTEP 2
If, after following STEP 1, you feel the need for further assistance, please contact your
area's Mazda representative (Indicated on the next page).
Please help us by providing the following information:
6. Your question(s)
9-9
Form No.8AS3-EA-09E
Customer Assistance
Customer Assistance (Mexico)
Your complete and permanent satisfaction is our business. We are here to serve you. All
Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle
in top condition.
qSTEP 1: Contact Your Mazda Dealer

address the issue.
l If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,
SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of
the dealership or the OWNER.
l If it becomes necessary to have the components or wiring system for the supplementary
restraint system modified to accommodate a person with certain medical conditions in
accordance with a certified physician, go to STEP2.
qSTEP 2: Contact Mazda Motor de Mexico

If for any reason you feel the need for further assistance after contacting your dealership
management and it becomes necessary to have the components or wiring system for the
supplementary restraint system modified to accommodate a person with certain medical
conditions in accordance with a certified physician, you can reach Mazda Motor de Mexico
by one of the following ways.
Log on: at www.MazdaMexico.com.mx
Answers to many questions, including how to locate or contact a local Mazda dealership in
Mexico, can be found here.
E-mail: click on Contactanos at the top of the page at www.MazdaMexico.com.mx
By phone at: 1 (866) 315 0220
By letter at:
Attn: Customer Assistance
Irvine, CA 92618-2922
P.O. Box 19734
Irvine, CA 92623-9734
9-10
Form No.8AS3-EA-09E
Customer Assistance
In order to serve you efficiently and effectively, please help us by providing the following
information:
6. Your question(s)
9-11
Form No.8AS3-EA-09E
Mazda Importer/Distributors
Importer/Distributor
Distributor in Each Area
qU.S.A.
qCANADA

Irvine, CA 92618-2922 U.S.A.
P.O. Box 19734
Irvine, CA 92623-9734 U.S.A.
TEL: 1 (800) 222-5500 (in U.S.A.)
(949) 727-1990 (outside U.S.A.)
Mazda Canada Inc.

55 Vogell Road, Richmond Hill,
Ontario, L4B 3K5 Canada
TEL: 1 (800) 263-4680 (in Canada)
(905) 787-7000 (outside Canada)
qPUERTO RICO/U.S. Virgin Islands

Plaza Motors Corp. (Mazda de Puerto
Rico)
P.O. Box 362722, San Juan, Puerto Rico
00936-2722
TEL: (787) 641-9300
qMEXICO
Mazda Motor de Mexico
Circuito Guillermo Gonzalez Camarena N
1500 Col. Centro de Ciudad Santa Fe.
01210, Mexico, D.F.
TEL: Center of Attention to Clients:
01 (800) 016 2932. in Mexico
qGUAM
Triple J Motors
157 South Marine Drive, Tamuning,
GUAM 96911 USA
P.O. Box 6066 Tamuning, Guam 96931
TEL: (671) 649-6555
qSAIPAN
Pacific International Marianas, Inc.
(d.b.a. Midway Motors)
P.O. Box 887 Saipan, MP 96950
TEL: (670) 234-7524
9-12
Form No.8AS3-EA-09E
Mazda Importer/Distributors
Triple J Saipan, Inc.
(d.b.a. Triple J Motors)
P.O. Box 500487 Saipan, MP 96950-0487
TEL: (670) 234-7133/3051
qAMERICAN SAMOA
Polynesia Motors, Inc.
P.O. Box 1120, Pago Pago, American
Samoa 96799
TEL: (684) 699-9347
9-13
Form No.8AS3-EA-09E
Warranty
Warranties for Your Mazda
l
l
l
l
l
New Vehicle Limited Warranty

Distributor Major Component Limited Warranty (Canada only)
Safety Restraint System Limited Warranty
Anti-perforation Limited Warranty
Federal Emission Control Warranty (U.S.A. only)
Emission Defect Warranty
Emission Performance Warranty
California Emission Control Warranty (U.S.A. only)
Emission Control Warranty (Canada only)
Replacement Parts and Accessories Limited Warranty
Tire Warranty
l
l
l
l
l
l
NOTE
Detailed warranty information is provided with your Mazda.
9-14
Form No.8AS3-EA-09E
Warranty
Outside the United States
Government regulations in the United States require that automobiles meet specific
emission regulations and safety standards. Therefore, vehicles built for use in the United
States may differ from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside the United States. However, in the event that you are moving to Canada
permanently, Mazda vehicles built for use in the United States could be eligible for
exportation to Canada with specific vehicle modifications to comply with the Canadian
Motor Vehicle Safety requirements (CMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to travelers on
vacation.
You may have the following problems if you do take your vehicle outside of the United
States:
l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
l Proper repair facilities, tools, testing equipment, and replacement parts may not be
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-15
Form No.8AS3-EA-09E
Warranty
Outside Canada
Government regulations in Canada require that automobiles meet specific emission
regulations and safety regulations. Therefore, vehicles built for use in Canada may differ
from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside Canada. However, in the event that you are moving to the United States
permanently, Mazda vehicles built for use in Canada could be eligible for exportation to the
United States with specific vehicle modifications to comply with the United States Federal
Motor Vehicle Safety Standards (FMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to travelers on
vacation.
You may have the following problems if you do take your vehicle outside of Canada:
l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
l Proper repair facilities, tools, testing equipment, and replacement parts may not be
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-16
Form No.8AS3-EA-09E
Warranty
Registering Your Vehicle in A Foreign Country (Except
United States and Canada)
Government regulations in your country could require that automobiles meet specific
emission and safety standards.
Vehicles built for your country may differ from those built for other countries. In addition
to registration problems, satisfactory service may be difficult or even impossible in another
country.
The fuel specified for your vehicle may be unavailable.
Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be
unavailable.
There might not be an Authorized Mazda Dealer in the country you plan to take your
vehicle.
The Mazda warranty is valid only in certain countries.
9-17
Form No.8AS3-EA-09E
Warranty
Add-On Non-Genuine Parts and Accessories
Non-genuine parts and accessories for Mazda vehicles can be found in stores.
These may fit your vehicle, but they are not approved by Mazda for use with Mazda
vehicles. When you install non-genuine parts or accessories, they could affect your
vehicle's performance or safety systems; the Mazda warranty doesn't cover this. Before you
install any non-genuine parts or accessories, consult an Authorized Mazda Dealer.
WARNING
Always consult an Authorized Mazda Dealer before you install non-genuine parts or
accessories:
Installation of non-genuine parts or accessories is dangerous. Improperly designed
parts or accessories could seriously affect your vehicle's performance or safety
systems. This could cause you to have an accident or increase your chances of
injuries in an accident.
Be very careful in choosing and installing add-on electrical equipment, such as
mobile telephones, two-way radios, stereo systems, and car alarm systems:
Incorrectly choosing or installing improper add-on equipment or choosing an
improper installer is dangerous. Essential systems could be damaged, causing engine
stalling, air-bag (SRS) activation, ABS/TCS/DSC inactivation, or a fire in the vehicle.
Mazda assumes no responsibility for death, injury, or expenses that may result from the
installation of add-on non-genuine parts or accessories.
9-18
Form No.8AS3-EA-09E
Cell Phones
Cell Phones Warning
WARNING
Please comply with the legal regulations concerning the use of communication
equipment in vehicles in your State or Province:
Use of any electrical devices such as cell phones, computers, portable radios, vehicle
navigation or other devices by the driver while the vehicle is moving is dangerous.
Dialing a number on a cell phone while driving also ties-up the driver's hands. Use of
these devices will cause the driver to be distracted and could lead to a serious
accident. If a passenger is unable to use the device, pull off the right-of-way to a safe
area before use. If use of a cell phone is necessary despite this warning, use a handsfree system to at least leave the hands free to drive the vehicle. Never use a cell
phone or other electrical devices while the vehicle is moving and, instead,
concentrate on the full-time job of driving.
9-19
Form No.8AS3-EA-09E
Uniform Tire Quality Grading System (UTQGS)

This information relates to the tire grading system developed by the U.S. National
Highway Traffic Safety Administration for grading tires by tread wear, traction, and
temperature performance.
qTread Wear
The tread wear grade is a comparative rating based on the wear rate of the tire when tested
under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one-and-a-half times as well on the government
course as a tire graded 100.
The relative performance of tires depends upon the actual conditions of their use, however,
and may depart significantly from the norm because of variations in driving habits, service
practices and differences in road characteristics and climate.
qTraction-AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent
the tire's ability to stop on wet pavement as measured under controlled conditions on
specified government test surfaces of asphalt and concrete. A tire marked C may have poor
traction performance.
WARNING
The traction grade assigned to this tire is based on braking (straight ahead) traction
tests and does not include acceleration cornering (turning), hydroplaning, or peak
traction characteristics.
qTemperature-A, B, C
The temperature grades A (the highest), B, and C, represent the tire's resistance to the
generation of heat and its ability to dissipate heat when tested under controlled conditions
on a specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and reduce tire
life, and excessive temperatures can lead to sudden tire failure.
Grade C corresponds to a level of performance which all passenger vehicle tires must meet
under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent
higher levels of performance on the laboratory test wheel than the minimum required by
law.
9-20
Form No.8AS3-EA-09E

WARNING
Keep your vehicle's tires properly inflated and not overloaded:
Driving with improperly inflated or overloaded tires is dangerous. Excessive speed,
underinflation, or excessive loading, either separately or in combination, can cause
heat buildup and possible tire failure. The temperature grade for this tire is
established for a tire that is properly inflated and not overloaded.
These grades will be added to the sidewalls of passenger vehicle tires over the next several
years according to a schedule established by the NHTSA and the tire manufacturers.
The grade of tires available as standard or optional equipment on Mazda vehicles may vary
with respect to grade.
ALL PASSENGER VEHICLE TIRES MUST CONFORM TO THESE GRADES AND
TO ALL OTHER FEDERAL TIRE-SAFETY REQUIREMENTS.
qUniform Tire Quality Grading

Quality grades can be found where applicable on the tire sidewall between tread shoulder
and maximum section width.
For example:
Treadwear 200 Traction AA Temperature A
UTQGS MARK (example)
TREADWEAR 200 TRACTION AA

TEMPERATURE A
9-21
Form No.8AS3-EA-09E
Tire Information (U.S.A.)

Tire Labeling
Federal law requires tire manufacturers to place standardized information on the sidewall of
all tires. This information identifies and describes the fundamental characteristics of the tire
and also provides a tire identification number for safety standard certification and in case of
a recall.
qInformation on Passenger Vehicle Tires

Please refer to the diagram below.
1. TIN: U.S. DOT tire identification number

2. Passenger car tire
3. Nominal width of tire in millimeters
4. Ratio of height to width (aspect ratio)
5. Radial
6. Rim diameter code
7. Load index & speed symbol
8. Severe snow conditions
9. Tire ply composition and materials used
10. Max. load rating
9-22
Form No.8AS3-EA-09E

11. Tread wear, traction and temperature grades
12. Max. permissible inflation pressure
13. SAFETY WARNING
P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation
of the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
P
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
NOTE
If your tire size does not begin with a letter this may mean it is designated by either ETRTO
(European Tire and Rim Technical Organization) or JATMA (Japan Tire Manufacturing Association).
215
215 is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
65
65 is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
R
R is the tire construction symbol. R indicates Radial ply construction.
15
15 is the wheel rim diameter in inches.
95
95 is the Load Index. This two-or three-digit number indicates how much weight each
tire can support.
9-23
Form No.8AS3-EA-09E

H
H is the speed rating. The speed rating denotes the maximum speed for which the use of
the tire is rated.
Letter Rating
Q
R
S
T
U
H
V
W
Y
Speed Rating
99 mph
106 mph
112 mph
118 mph
124 mph
130 mph
149 mph
168* mph
186* mph
* For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. For
tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.
M+S or M/S: Mud and Snow

AT: All Terrain.
AS: All Season. The M+S or M/S indicates that the tire has some functional use in
mud and snow.
U.S. DOT Tire Identification Number (TIN)
This begins with the letters DOT which indicates the tire meets all federal standards. The
next two numbers or letters are the plant code where it was manufactured, and the last four
numbers represent the week and year the tire was manufactured. For example, the numbers
457 means the 45st week of 1997. After 2000 the numbers go to four digits. For example,
the number 2102 means the 21th week of 2002. The other numbers are marketing codes
used at the manufacturer's discretion. This information is used to contact consumers if a tire
defect requires a recall.
Tire Ply Composition and Materials Used
The number of plies indicates the number of layers of rubber-coated fabric in the tire. In
general, the greater the number of plies, the more weight a tire can support. Tire
manufacturers also must indicate the tire materials, which include steel, nylon, polyester,
and other.
Maximum Load Rating
This number indicates the maximum load in kilograms and pounds that can be carried by
the tire.
Maximum Permissible Inflation Pressure
This number is the greatest amount of air pressure that should ever be put in the tire under
normal driving conditions.
9-24
Form No.8AS3-EA-09E

Tread Wear, Traction and Temperature Grades
Tread wear: The tread wear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test course. For
example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the
government course as a tire graded 100.
Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades
represent the tire's ability to stop on wet pavement as measured under controlled conditions
on specified government test surfaces of asphalt and concrete. A tire marked C may have
poor traction performance.
Temperature: The temperature grades are A (the highest), B and C, representing the tire's
resistance to the generation of heat and its ability to dissipate heat when tested under
controlled conditions on a specified indoor laboratory test wheel.
Snow Tires
In some heavy snow areas, local governments may require true snow tires, those with very
deeply cut tread. These tires should only be used in pairs or placed on all four wheels.
Make sure you purchase snow tires that are the same size and construction type as the other
tires on your vehicle.
SAFETY WARNING
The following safety warning appears on the tire's sidewall.
SERIOUS INJURY MAY RESULT FROM:
l EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTINGMATCH TIRE DIAMETER TO RIM DIAMETER; NEVER EXCEED 40 psi (275 kPa)
TO SEAT BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNT
TIRES.
l TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/DAMAGEFOLLOW OWNER'S MANUAL AND PLACARD IN VEHICLE-FREQUENTLY
CHECK INFLATION PRESSURE AND INSPECT FOR DAMAGE.
9-25
Form No.8AS3-EA-09E

qInformation on Temporary Tires
Please refer to the diagram below.
1. Temporary tires
2. Nominal width of tire in millimeters
3. Ratio of height to width (aspect ratio)
4. Diagonal
5. Rim diameter code
6. Load index&speed symbol
T115/70D 16 90M is an example of a tire size and load index rating. Here is an explanation
of the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
T
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
115
115 is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
9-26
Form No.8AS3-EA-09E

70
70 is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
D
D is the tire construction symbol. D indicates diagonal ply construction.
16
16 is the wheel rim diameter in inches.
90
90 is the Load Index. This two-or three-digit number indicates how much weight each
tire can support.
M
M is the speed rating. The speed rating denotes the maximum speed for which the use of
the tire is rated.
Letter Rating
M
Speed Rating
81 mph
9-27
Form No.8AS3-EA-09E

Location of the Tire Label (Placard)
You will find the tire label containing tire inflation pressure by tire size and other important
information on the driver's side B-pillar or on the edge of the driver's door frame.
SAMPLE
qRecommended Tire Inflation Pressure

On the tire label you will find the recommended tire inflation pressure in both kPa and psi
for the tires installed as original equipment on the vehicle. It is very important that the
inflation pressure of the tires on your vehicle is maintained at the recommended pressure.
You should check the tire pressure regularly to insure that the proper inflation pressure is
maintained.
Refer to Tires on page 10-7.
NOTE
Tire pressures listed on the vehicle placard or tire information label indicate the recommended cold
tire inflation pressure, measured when the tires are cold, after the vehicle has been parked for at least
3 hours. As you drive, the temperature in the tire warms up, increasing the tire pressure.
9-28
Form No.8AS3-EA-09E

WARNING
Always check the tire inflation pressures on a regular basis according to the
recommended tire inflation pressure on the tire label and in conjunction with the
information in this owner's manual:
Driving your vehicle with under-inflated tires is dangerous.
Under-inflation is the most common cause of failures in any kind of tire and may
result in severe cracking, tread separation or blowout, with unexpected loss of
vehicle control and increased risk of injury. Under-inflation increases sidewall flexing
and rolling resistance, resulting in heat buildup and internal damage to the tire. It
results in unnecessary tire stress, irregular wear, loss of control and accidents. A tire
can lose up to half of its air pressure and not appear to be flat!
It is impossible to determine whether or not tires are properly inflated just by looking
at them.
qChecking Tire Pressure

1. When you check the air pressure, make sure the tires are cold meaning they are not
hot from driving even a mile.
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release air by pushing on the metal stem in the center of the
valve. Then recheck the pressure with your tire gauge.
6. Replace the valve cap.
7. Repeat with each tire, including the spare.
NOTE
Some spare tires require higher inflation pressure.
8. Visually inspect the tires to make sure there are no nails or other objects embedded that
could poke a hole in the tire and cause an air leak.
9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or other
irregularities.
NOTE
Warm tires normally exceed recommended pressures. Don't release air from warm tires to adjust the
pressure.
Under-inflation can cause serious failures and accidents.
Over-inflation can produce a harsh ride and the greater possibility of damage from road hazards.
9-29
Form No.8AS3-EA-09E

qGlossary of Terms
Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and
the maximum weight the vehicle can carry.
Tire Identification Number (TIN): A number on the sidewall of each tire providing
information about the tire brand and manufacturing plant, tire size, and date of
manufacture.
Inflation Pressure: A measure of the amount of air in a tire.
kPa: Kilopascal, the metric unit for air pressure.
psi: Pounds per square inch, the English unit for air pressure.
B-pillar: The structural member at the side of the vehicle behind the front door.
Original Equipment (OE): Describes components originally equipped on the vehicle.
Vehicle Load Limit: The maximum value of the combination weight of occupants and
cargo.
Bead Area of the Tire: Area of the tire next to the rim.
Sidewall Area of the Tire: Area between the bead area and the tread.
Tread Area of the Tire: Area on the perimeter of the tire that contacts the road when it's
mounted on the vehicle.
Seating capacity means the total allowable number of vehicle occupants. Seating capacity
is described on the tire label.
Production options weight is the combination weight of installed regular production
options weighing over 2.3 kilograms in excess of the standard items which they replace,
and not previously considered in the curb weight or accessory weight, including heavy
duty brakes, ride levelers, roof rack, heavy duty battery, and special trim.
Rim is the metal support (wheel) for a tire or a tire and tube assembly upon which the tire
beads are seated.
9-30
Form No.8AS3-EA-09E

Tire Maintenance
Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are
some important maintenance points:
qTire Inflation Pressure

Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintain
recommended pressures for the best ride, top handling, and minimum tire wear. Use the
pressures specified on the vehicle tire information placard or tire label for optimum service.
qTire Rotation
To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregular
wear develops. During rotation, inspect them for correct balance.
Forward
Do not include (TEMPORARY USE ONLY)
spare tire in rotation.
Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or a
combination of the following:
l Incorrect tire pressure
l Improper wheel alignment
l Out-of-balance wheel
l Severe braking
After rotation, inflate all tire pressures to specification (page 10-7) and inspect the lug nuts
for tightness.
CAUTION
Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern
or studs only from front to rear, not from side to side. Tire performance will be
weakened if rotated from side to side.
9-31
Form No.8AS3-EA-09E

qReplacing a Tire
WARNING
Always use tires that are in good condition:
Driving with worn tires is dangerous. Reduced braking, steering, and traction could
If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replace
the tire when this happens.
Tread wear indicator
New tread
Worn tread
You should replace it before the band is across the entire tread.
NOTE
Tires degrade over time, even when they are not being used on the road. It is recommended that tires
generally be replaced when they are 6 years or older. Heat caused by hot climates or frequent high
loading conditions can accelerate the aging process. You should replace the spare tire when you
replace the other road tires due to the aging of the spare tire. Regarding the manufacturing week and
year is indicated with 4 digit. Refer to The tire labeling on page 9-22.
qSafety Practices
The way you drive has a great deal to do with your tire mileage and safety. So cultivate
good driving habits for your own benefit.
l Observe posted speed limits
l Avoid fast starts, stops and turns
l Avoid potholes and objects on the road
l Do no run over curbs or hit the tire against the curb when parking
9-32
Form No.8AS3-EA-09E

CAUTION
If you feel a sudden vibration or ride disturbance while driving or you suspect your
tire or vehicle has been damaged, immediately reduce your speed. Drive with caution
until you can safely pull off the road. Stop and inspect the tire for damage. If the tire
is under-inflated or damaged, deflate it, remove the tire and rim and replace it with
your spare tire. If you cannot detect a cause, have the vehicle towed to the nearest
vehicle or tire dealer to have the vehicle inspected.
9-33
Form No.8AS3-EA-09E

Vehicle Loading
WARNING
Do not tow a trailer with this vehicle:
Towing a trailer with this vehicle is dangerous because it has not been designed to
tow a trailer and doing so will affect the drive system which could result in vehicle
damage.
This section will guide you in the proper loading of your vehicle, to keep your loaded
vehicle weight within its design rating capability. Properly loading your vehicle will
provide maximum return of vehicle design performance. Before loading your vehicle,
familiarize yourself with the following terms for determining your vehicle's weight ratings,
from the vehicle's Safety Certification Label and Tire and Load Information Label:
WARNING
Overloaded Vehicle:
Overloading a vehicle is dangerous. The results of overloading can have serious
consequences in terms of passenger safety. Too much weight on a vehicle's
suspension system can cause spring or shock absorber failure, brake failure,
handling or steering problems, irregular tire wear, tire failure or other damage.
Overloading makes a vehicle harder to drive and control. It also increases the
distance required for stopping. In cases of serious overloading, brakes can fail
completely, particularly on steep grades. The load a tire will carry safely is a
combination of the size of the tire, its load range, and corresponding inflation
pressure.
Never overload the vehicle and always observe the vehicle's weight ratings from the
vehicle's Safety Certification and Tire and Load Information labels.
9-34
Form No.8AS3-EA-09E

Base Curb Weight is the weight of the vehicle including a full tank of fuel and all
standard equipment. It does not include passengers, cargo, or optional equipment.
Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your
dealer plus any aftermarket equipment.
PAYLOAD
Payload is the combination weight of cargo and passengers that the vehicle is designed to
carry. The maximum payload for your vehicle can be found on the Tire and Load
Information label on the driver's door frame or door pillar. Look for THE
COMBINATION WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER
EXCEED XXX kg or XXX lbs for your maximum payload. The payload listed on the tire
label is the maximum payload for the vehicle as built by the assembly plant. If any
aftermarket or dealer installed equipment has been installed on the vehicle, the weight of
the equipment must be subtracted from the payload listed on the tire label in order to be
accurate.
9-35
Form No.8AS3-EA-09E

SAMPLE
CARGO
Cargo Weight includes all weight added to the Base Curb Weight, including cargo and
optional equipment.
The cargo weight limit decreases depending on the number of vehicle occupants. The cargo
weight limit can be calculated by subtracting the total weight of the vehicle occupants from
the combination weight of occupants and cargo should never exceed value on the tire
label.
9-36
Form No.8AS3-EA-09E

Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg
(849 lbs) for the combination weight of occupants and cargo should never exceed:
The cargo weight limit with one occupant is 385 kg (849 lbs) _ 68 kg (150 lbs) = 317 kg
(699 lbs)
The cargo weight limit with two occupants is 385 kg (849 lbs) _ (68 2) kg ( (150 2)
lbs) = 249 kg (549 lbs)
If the weight of the occupant increases, the cargo weight limit decreases by that much.
GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) including vehicle curb weight and all payload.
GAWR (Gross Axle Weight Rating) is the maximum allowable weight that can be carried
by a single axle (front or rear). These numbers are shown on the Safety Compliance
Certification Label located on the driver's door frame or door pillar. The total load on
each axle must never exceed its GAWR.
GVW
GVW (Gross Vehicle Weight) is the Vehicle Curb Weight
cargo
passengers.
GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fully
loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is
shown on the Safety Compliance Certification Label located on the driver's door
frame or door pillar. The GVW must never exceed the GVWR.
9-37
Form No.8AS3-EA-09E

SAMPLE
WARNING
Exceeding Axle Weight Rating Limits:
Exceeding the Safety Certification Label axle weight rating limits is dangerous and
could result in death or serious injury as a result of substandard vehicle handling,
performance, engine, transmission and/or structural damage, serious damage to the
vehicle, or loss of control.
Always keep the vehicle within the axle weight rating limits.
Do not tow a trailer with this vehicle:
Towing a trailer with this vehicle is dangerous because it has not been designed to
tow a trailer and doing so will affect the drive system which could result in vehicle
damage.
9-38
Form No.8AS3-EA-09E
GCW
GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW).
GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the
vehicle - including all cargo and passengers - that the vehicle can handle without risking
damage. The GCW must never exceed the GCWR.
WARNING
Exceeding GVWR or GAWR Specifications:
Exceeding the GVWR or the GAWR specified on the certification label is dangerous.
Exceeding any vehicle rating limitation could result in a serious accident, injury, or
damage to the vehicle.
Do not use replacement tires with lower load carrying capacities than the originals
because they may lower the vehicle's GVWR and GAWR limitations. Replacement
tires with a higher limit than the originals do not increase the GVWR and GAWR
limitations.
Never exceed the GVWR or the GAWR specified on the certification label.
9-39
Form No.8AS3-EA-09E

Steps for Determining the Correct Load Limit:
Steps for Determining Correct Load Limit:
(1) Locate the statement The combined weight of occupants and cargo should
never exceed XXX kg or XXX lbs on your vehicle's placard.
(2) Determine the combined weight of the driver and passengers that will be
riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX kg
or XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage load
capacity. For example, if the XXX amount equals 1400 lbs. and there
will be five 150 lb passengers in your vehicle, the amount of available
cargo and luggage load capacity is 650 lbs. (1400_ 750 (5 150) = 650
lbs.)
(5) Determine the combined weight of luggage and cargo being loaded on the
vehicle. That weight may not safely exceed the available cargo and luggage
load capacity calculated in Step 4.
9-40
Form No.8AS3-EA-09E
Reporting Safety Defects

Reporting Safety Defects (U.S.A.)
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway
Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor
Corporation (Your Mazda Importer/Distributor).
If NHTSA receives similar complaints, it may open an investigation, and if it
finds that a safety defect exists in a group of vehicles, it may order a recall and
remedy campaign. However, NHTSA cannot become involved in individual
problems between you, your dealer, or Mazda Motor Corporation (Your Mazda
Importer/Distributor).
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888327-4236 (TTY:1-800-424-9153) ; go to http://www.safercar.gov; or write to:
Administrator, NHTSA, 1200 New Jersey Avenue, SE., Washington, DC,
20590. You can also obtain other information about motor vehicle safety from
http://www.safercar.gov.
NOTE
If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be forwarded to:
Irvine, California 92618-2922
or
P.O. Box 19734
Irvine, CA 92623-9734
Customer Assistance Center or toll free at 1 (800) 222-5500
If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown (page 9-12) in
this booklet.
9-41
Form No.8AS3-EA-09E
Reporting Safety Defects

Reporting Safety Defects (Canada)
Canadian customers who wish to report a safety-related defect to Transport Canada, Defect
Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contact
Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330
Sparks Street, Ottawa ON K1A 0N5.
For additional road safety information, please visit the Road Safety website at:
http://www.tc.gc.ca/roadsafety/menu.htm
9-42
Form No.8AS3-EA-09E
Service Publications
Factory-authorized Mazda service publications are available for owners who wish to do
some of their own maintenance and repair.
When requesting any of our publications through an Authorized Mazda Dealer, refer to the
chart below.
If they do not have what you need in stock, they can order it for you.
PUBLICATION ORDER NUMBER
9999-95-063B-10
9999-MX-063B-10
9999-95-039G-10
9999-MX-039G-10
9999-95-078C-10 (U.S.A. only)
9999-EC-078C-10 (Canada only)
9999-PR-078C-10 (Puerto Rico, Mexico only)
9999-95-101F-10
9999-95-078C-10NAV (U.S.A. only)
9999-EC-078C-10NAV (Canada only)
9999-PR-078C-10NAV (Puerto Rico, Mexico only)
PUBLICATION DESCRIPTION
2010 WORKSHOP MANUAL (English)
2010 WORKSHOP MANUAL (Spanish)
2010 WIRING DIAGRAM (English)
2010 WIRING DIAGRAM (Spanish)
2010 OWNER'S MANUAL
2010 OWNER'S MANUAL
2010 OWNER'S MANUAL
2010 SERVICE HIGHLIGHTS
2010 NAVIGATION SYSTEM OWNER'S MANUAL
qWORKSHOP MANUAL:
Covers recommended maintenance and repair procedures of the drive train, body and
chassis.
qWIRING DIAGRAM:
Provides electrical schematics as well as component location for the entire electrical
system.
qOWNER'S MANUAL:
This booklet contains information regarding the proper care and operation of your vehicle.
This is not a technician's manual.
qSERVICE HIGHLIGHTS:
Provides description and operation of the many systems of your Mazda.
9-43
Form No.8AS3-EA-09E
qNAVIGATION SYSTEM OWNER'S MANUAL:
This booklet contains information regarding the proper operation and use of the navigation
system. This is not a technician's manual.
9-44
Form No.8AS3-EA-09E
10
Specifications
Technical information about your Mazda.
Identification Numbers ............................................................... 10-2

Vehicle Information Labels ..................................................... 10-2
Specifications ............................................................................... 10-4
Specifications .......................................................................... 10-4
Personalization Features ............................................................ 10-8
Personalization Features .......................................................... 10-8
10-1
Form No.8AS3-EA-09E
Identification Numbers
Vehicle Information Labels
qVehicle Identification Number
qChassis Number
Open the cover shown in the figure to
check the chassis number.
The vehicle identification number legally

identifies your vehicle. The number is on
a plate attached to the left top side of the
dashboard. This plate can easily be seen
through the windshield.
qVehicle Emission Control

Information Label
qMotor Vehicle Safety Standard Label
10-2
Form No.8AS3-EA-09E
Identification Numbers
qTire Pressure Label
qEngine Number
2.5-liter engine
Forward
3.7-liter engine
Forward
10-3
Form No.8AS3-EA-09E
Specifications
Specifications
qEngine
Specification
2.5-liter engine
3.7-liter engine
DOHC-16V in-line, 4-cylinder
DOHC-24V 60V, 6-cylinder
89.0 100 mm (3.50 3.94 in)
95.5 86.7 mm (3.75 3.41 in)
2,488 ml (2,488 cc, 151.8 cu in)
3,726 ml (3,726 cc, 227.4 cu in)
9.7
10.3
Item
Type
BoreStroke
Displacement
Compression ratio
qElectrical System
Item
Battery
2.5-liter engine
Spark-plug number
3.7-liter engine
2.5-liter engine
3.7-liter engine
Spark-plug gap
Classification
12V-46AH/5HR
LFG1 18 110*1
L3Y2 18 110
CY01 18 110*1
1.251.35 mm (0.0490.053 in)
1.291.45 mm (0.0510.057 in)
*1 ex factory
CAUTION
When cleaning the iridium plugs, do not use a wire brush.
(2.5-liter engine) The fine particulate coating on the iridium alloy and platinum tips
could be damaged.
(3.7-liter engine) The fine particulate coating on the platinum alloy could be
damaged.
qLubricant Quality
Lubricant
Engine oil
Any temperature
Manual transaxle oil
Above 10C (50F)
Automatic transaxle fluid
2.5-liter engine
3.7-liter engine
Power steering fluid

Brake/Clutch fluid
10-4
Form No.8AS3-EA-09E
Classification
Refer to the recommended SAE viscosity numbers on page
8-19.
API Service
GL-4 or GL-5
SAE
75W-90
API Service
GL-4 or GL-5
SAE
80W-90
ATF M-V
JWS3309
ATF M-V
SAE J1703 or FMVSS116 DOT-3
Specifications
qCapacities
(Approximate Quantities)
Item
2.5-liter engine
Engine oil
3.7-liter engine
Coolant
With oil filter replacement

Without oil filter replacement
With oil filter replacement
Without oil filter replacement
2.5-liter engine
3.7-liter engine
Manual transaxle oil

Automatic transaxle fluid
2.5-liter engine
3.7-liter engine
Fuel tank
Capacity
5.0 L (5.3 US qt. 4.4 Imp qt)
4.6 L (4.9 US qt. 4.0 Imp qt)
5.2 L (5.5 US qt. 4.6 Imp qt)
4.7 L (5.0 US qt. 4.1 Imp qt)
9.4 L (9.9 US qt. 8.3 Imp qt)
9.8 L (10 US qt. 8.6 Imp qt)
2.85 L (3.01 US qt, 2.51 Imp qt)
8.14 L (8.60 US qt, 7.16 Imp qt)
7.0 L (7.4 US qt, 6.2 Imp qt)
70.0 L (18.5 US gal, 15.4 Imp gal)
Check oil and fluid levels with dipsticks or reservoir gauges.
qDimensions
Overall length
Item
Without license plate holder
With license plate holder
Overall width
Overall height
Front tread
Rear tread
16-inch
17-inch
18-inch
16-inch
17-inch
18-inch
Wheelbase
Specification
4,920 mm (193.7 in)
4,940 mm (194.5 in)
1,840 mm (72.4 in)
1,470 mm (57.9 in)
1,595 mm (62.8 in)
1,595 mm (62.8 in)
1,585 mm (62.4 in)
1,595 mm (62.8 in)
1,595 mm (62.8 in)
1,585 mm (62.4 in)
2,790 mm (109.8 in)
qWeights
2.5-liter engine
Manual transaxle
Item
GVWR (Gross Vehicle Weight Rating)
Front
GAWR (Gross Axle Weight Rating)
Rear
Weight
1,969 kg (4,340 lb)
1,037 kg (2,286 lb)
935 kg (2,062 lb)
10-5
Form No.8AS3-EA-09E
Specifications
Automatic transaxle
Item
Front
Rear
Weight
1,996 kg (4,400 lb)
1,066 kg (2,350 lb)
934 kg (2,059 lb)
3.7-liter engine
Item
Front
Rear
Weight
2,082 kg (4,590 lb)
1,140 kg (2,513 lb)
943 kg (2,079 lb)
qAir Conditioner
Item
Classification
HFC134a (R-134a)
Refrigerant Type
qLight Bulbs
Exterior light
Category
Light bulb
High beam
Headlights
Low beam
Halogen
Xenon fusion
Front turn signal lights/Parking lights

Fog lights
Front side-marker lights
High-mount brake light
Brake lights/Taillights (Rear side-marker lights)
Reverse lights
Ground illumination light
*1 LED is the abbreviation for Light Emitting Diode.
10-6
Some models.
Form No.8AS3-EA-09E
Wattage
65
55
35
28/8
55
4.9
LED*1
26.9
26.9/6.7
LED*1
17.9
4.8
5.5
ECE R (SAE)
H9 (H9)
H7 (H7)
D2S (D2S)
(#7444NA)
H11 (H11)
(#168)
()
(#3757A)
(#3057A)
()
W16W (#921)
(t94)
()
Specifications
Interior light
Light bulb
Trunk light
Overhead light/Map lights (Front)
Courtesy lights
Category
Wattage
3
8
10
5
2.1
ECE R
W5W
qTires
NOTE
l
The tires have been optimally matched with the chassis of your vehicle.
When replacing tires, Mazda recommends that you replace tires of the same type originally fitted
to your vehicle. For details, contact an Authorized Mazda Dealer.
When changing tires extra care must be taken to be sure the TPMS is working. (page 5-27)
Check the tire pressure label for tire size and inflation pressure.
Refer to Tire Inflation Pressure on page 8-32.
Standard tire
Inflation pressure
Tire size
Front
220 kPa (32 psi)
220 kPa (32 psi)
220 kPa (32 psi)
P205/65R16 94H
P215/55R17 93V
P235/45R18 94W
Rear
220 kPa (32 psi)
220 kPa (32 psi)
220 kPa (32 psi)
Temporary spare tire

Tire size
T115/70D16 92M
Inflation pressure
420 kPa (60 psi)
qFuses
Refer to the fuse rating on page 8-46.
10-7
Form No.8AS3-EA-09E
Personalization Features
The following Personalization Features are possible. These settings can only be changed by an Authorized
Mazda Dealer.
Setting
Auto headlight on/off
Auto headlight off
Turn indicator
Blind spot warning
Illumination entry
Smart turn
Keyless entry
Function
Adjusts headlight illumination on/off timing
based on surrounding lightness/darkness
Time required for headlights to turn off after
ignition is switched off
Sets beep sound volume level
Deactivates warning beep function
Time required for interior lamp to turn off
automatically after all doors are closed
Deactivates function that allows interior lamp
to illuminate automatically when ignition is
switched off
Deactivates function that allows interior lamp
to illuminate automatically when doors are
unlocked
Time required for interior lamp to turn off
automatically
(prevents battery depletion when a door is
open/ajar)
Activates function that allows turn signal lights
to flash three times with momentary turn switch
operation (when changing lanes)
Selects unlocking method with the retractable
key
Time required for doors to relock automatically
after unlocking with transmitter
Deactivates function that allows horn to sound
automatically when doors are locked by
pressing transmitter two consecutive times
10-8
Form No.8AS3-EA-09E
Initial Setting
After Setting Change
20004000 lx
10002000 lx
30 seconds
0/60/120 seconds
High
Activated
Low
Deactivated
15 seconds
7.5/30/60 seconds
Activated
Deactivated
Activated
Deactivated
30 minutes
10 minutes
Deactivated
Activated
Press2
Press1
30 seconds
60/90 seconds
Activated
Deactivated
Setting
Advanced keyless
entry
Function
Activates function to automatically lock doors
when leaving vehicle
(with key being carried away)
Deactivates advanced key remaining battery
level warning light in instrument cluster
Adjusts sound volume of answer-back beep
during keyless entry system operation
Adjusts sound volume of warning beep for
advanced keyless entry system
Chooses whether permission is given to open
trunk when advanced keys are both inside trunk
or outside vehicle
Deactivates function that allows power supply
to turn off automatically when ignition has been
switched to ACC for a long period of time
Selects a transition pattern in which ignition
position can be switched when pressing push
button start
Deactivates advanced key function
Selects door unlocking method with the door

handle sensor and/or the request switch.
Initial Setting
Deactivated
Activated
Activated
Deactivated
High
Low/Deactivated
High
Low
Permitted
Not permitted
Activated
Deactivated
ON Off
ON ACC Off
Activated
Deactivated
2. Touch the handle,
and all doors unlock./3.
Press the request
switch once to unlock
1. Touch the
driver's door. Press
handle, and only again to unlock the
the driver's door rest./4. Touch the
unlocks.
handle to unlock
driver's door, then
press the request
switch to unlock the
rest.
The following Personalization Features can be changed by customer.

Setting
Welcome sound
Function
Deactivates welcome sound function 6-28
Initial Setting
Activated

Deactivated
10-9
Form No.8AS3-EA-09E
10-10
Form No.8AS3-EA-09E
11
Index
11-1
Form No.8AS3-EA-09E
Index
A
Accessory Socket ............................ 6-154

Add-On Non-Genuine Parts and
Accessories ....................................... 9-18
Advanced Key ..................................... 3-2
Advanced key maintenance ......... 3-5
Advanced key suspend
function ...................................... 3-19
Auxiliary key .............................. 3-19
Locking, unlocking doors ............ 3-8
Opening the trunk lid with request
switch ......................................... 3-10
Operational range ......................... 3-7
Remote control function ............. 3-15
Service ......................................... 3-6
Warning and beep sounds .......... 3-20
When warning indicator/beep is
activated ..................................... 3-23
Air Bag Systems ............................... 2-41
Antenna ............................................. 6-16
Anti-Lock Brake System (ABS) ......... 5-7
Warning light ............................... 5-8
Appearance Care ............................... 8-52
Audio System ................................... 6-16
Audio control switch .................. 6-81
Audio set (Type A) ..................... 6-27
Audio set (Type B) ..................... 6-57
AUX mode ................................. 6-84
Operating tips for audio
system ........................................ 6-16
Safety certification ..................... 6-87
Automatic Transaxle
Driving tips ................................ 5-18
Fluid ........................................... 8-24
Manual shift mode ..................... 5-15
Shift-lock override ..................... 5-14
Shift-lock system ....................... 5-14
Transaxle ranges ........................ 5-13
Battery
Emergency starting .................... 7-13
Maintenance ............................... 8-31
Specifications ............................. 10-4
Beeps
Electronic steering lock
warning ...................................... 5-59
Ignition key reminder ................. 5-59
Seat belt warning ........................ 5-59
Tire inflation pressure warning... 5-59
Before Starting the Engine .................. 4-5
After getting in ............................. 4-5
Before getting in .......................... 4-5
Blind Spot Monitoring
(BSM) System .................................. 5-33
BSM OFF Indicator Light .......... 5-35
BSM OFF Switch ....................... 5-36
Care of Radar Sensors ................ 5-36
Warning Light/Beep ................... 5-35
Bluetooth Audio (Type A) ................ 6-88
Bluetooth Audio (Type B) ................ 6-97
(Panel Operation) ............................ 6-131
Operation ................................. 6-133
System ...................................... 6-136
Hands-Free Setting ................... 6-138
Customer Service ..................... 6-141
Safety Certification .................. 6-141
When Bluetooth Hands-Free Cannot
be Used .................................... 6-140
11-2
Form No.8AS3-EA-09E
Index
B
(Voice Recognition) ........................ 6-104
Operation ................................. 6-109
System ...................................... 6-113
Hands-Free Setting ................... 6-121
Customer Service ..................... 6-130
Safety Certification .................. 6-129
When Bluetooth Hands-Free Cannot
be Used .................................... 6-129
Body Lubrication .............................. 8-28
Bottle Holder ................................... 6-150
Brake/Clutch
Fluid ........................................... 8-22
Brakes
Anti-lock brake system (ABS) ..... 5-7
Brakes assist ................................. 5-9
Foot brake .................................... 5-5
Pad wear indicator ........................ 5-9
Parking brake ............................... 5-6
Warning light ............................... 5-7
Break-In Period ................................... 4-6
Bulb Replacement ............................. 8-37
Child Restraint
Child restraint precautions ......... 2-27
Installing child-restraint
systems ....................................... 2-31
LATCH child-restraint
systems ....................................... 2-37
Child Safety Locks for Rear Doors ... 3-35
Climate Control System ...................... 6-2
Gas specifications ...................... 10-6
Clock ............................................... 6-146
Courtesy Lights ............................... 6-144
Cruise Control ................................... 5-19
Cup Holder ...................................... 6-149
Customer Assistance ........................... 9-2
C
Capacities .......................................... 10-5
Carbon Monoxide ............................... 4-4
Catalytic Converter ............................. 4-3
Cell Phones ....................................... 9-19
Center Console ................................ 6-152
D
Dashboard Illumination .................... 5-41
Daytime Running Lights ................... 5-62
Defroster
Mirror ......................................... 5-69
Rear window .............................. 5-68
Dimensions ....................................... 10-5
Door Locks ....................................... 3-32
Driving In Flooded Area ..................... 4-9
Driving on Uneven Road .................. 4-11
Driving Tips ........................................ 4-6
Automatic transaxle ................... 5-18
Break-in period ............................ 4-6
Driving in flooded area ................ 4-9
Driving on uneven road .............. 4-11
Hazardous driving ........................ 4-7
Money-saving suggestions ........... 4-6
Rocking the vehicle ...................... 4-8
Winter driving .............................. 4-8
11-3
Form No.8AS3-EA-09E
Index
D
Dynamic Stability Control (DSC) ..... 5-25

DSC OFF indicator light ............ 5-26
DSC OFF switch ........................ 5-26
TCS/DSC indicator light ............ 5-25
Fluids
Classification .............................. 10-4
Owner maintenance ................... 8-15
Fog Lights ......................................... 5-64
Foot Brake .......................................... 5-5
Front Seats
(Electrically Operated Seats) ............... 2-4
Front Seats
(Manually Operated Seats) ................. 2-2
Fuel
Filler lid and cap ........................ 3-47
Gauge ......................................... 5-41
Requirements ............................... 4-2
Tank capacity ............................. 10-5
Fuses ................................................. 8-46
Panel description ........................ 8-49
Replacement ............................... 8-46
E
Emergency Starting ........................... 7-13
Flooded engine ........................... 7-13
Jump-starting .............................. 7-14
Push-starting .............................. 7-16
Emergency Towing ........................... 7-17
Emission Control System .................... 4-3
Engine
Coolant ....................................... 8-21
Exhaust gas .................................. 4-4
Hood release .............................. 3-48
Oil .............................................. 8-19
Overheating ................................ 7-11
Starting ......................................... 5-4
Engine Compartment Overview ........ 8-18
Engine Coolant
Overheating ................................ 7-11
Engine Coolant Temperature
Gauge ................................................ 5-40
Exhaust Gas ........................................ 4-4
Exterior Care ..................................... 8-54
F
Flasher
Hazard warning .......................... 5-70
Headlights .................................. 5-60
Flat Tire ............................................... 7-3
Changing ...................................... 7-6
Spare tire and tool storage ............ 7-3
11-4
Form No.8AS3-EA-09E
G
Gauges .............................................. 5-38
Glove Box ....................................... 6-151
H
Hazard Warning Flasher .................... 5-70
Hazardous Driving .............................. 4-7
Headlights
Control ....................................... 5-60
Flashing ...................................... 5-62
High-low beam .......................... 5-62
Leveling ..................................... 5-62
HomeLink Wireless Control
System .............................................. 5-70
Hood Release .................................... 3-48
Horn .................................................. 5-69
Index
I
Ignition
Keys ........................................... 3-24
Switch .......................................... 5-2
Illuminated Entry System ............... 6-143
Immobilizer System
(with Advanced Key) ........................ 3-52
Immobilizer System
(without Advanced Key) ................... 3-56
Indicator Lights ................................. 5-43
BSM OFF ................................... 5-58
Cruise ......................................... 5-57
DSC OFF .................................... 5-57
Headlight high-beam .................. 5-55
KEY ............................................ 5-53
Security ...................................... 5-55
Shift position .............................. 5-56
TCS OFF .................................... 5-56
TCS/DSC ................................... 5-56
Turn signal/hazard warning ........ 5-58
Information Display ........................ 6-145
Audio display ........................... 6-146
Climate control display ............ 6-146
Clock ........................................ 6-146
Information display functions... 6-145
Trip computer ........................... 6-147
Inside Trunk Release Lever ............... 3-38
Instrument Cluster ............................. 5-38
Interior Care ...................................... 8-57
Interior Lights ................................. 6-143
Label Information ............................. 10-2

Lane-Change Signals ........................ 5-63
Light Bulbs
Replacement ............................... 8-37
Specifications ............................. 10-6
Lighting Control ............................... 5-60
Lubricant Quality .............................. 10-4
J
Jump-Starting .................................... 7-14
M
Maintenance
Introduction .................................. 8-2
Owner maintenance
precautions ................................. 8-16
Owner maintenance schedule ..... 8-15
Scheduled ..................................... 8-3
Manual Transaxle Operation ............. 5-10
Recommendations for shifting.... 5-11
Map Lights ...................................... 6-144
Meters and Gauges ........................... 5-38
Mirror Defroster ................................ 5-69
Mirrors
Outside mirrors .......................... 3-63
Rearview mirror ......................... 3-64
Money-Saving Suggestions ................ 4-6
Moonroof .......................................... 3-49
O
Odometer and Trip Meter .................. 5-39
Outside Mirrors ................................. 3-63
Outside Temperature Display ............ 5-42
Overhead Console ........................... 6-151
Overhead Lights .............................. 6-143
Overheating ....................................... 7-11
Overloading ...................................... 4-10
Keyless Entry System ....................... 3-25

Keys .................................................. 3-24
11-5
Form No.8AS3-EA-09E
Index
P
Paint Damage .................................... 8-52

Parking Brake ..................................... 5-6
Parking in an Emergency .................... 7-2
Personalization Features ................... 10-8
Power Door Locks ............................ 3-33
Power Steering .................................. 5-19
Fluid ........................................... 8-23
Power Windows ................................ 3-40
Push-Starting ..................................... 7-16
Seats
Front seat
(Electrically operated seats) ......... 2-4
Front seat
(Manually operated seats) ............ 2-2
Rear seat ..................................... 2-10
Seat warmer ................................ 2-13
Security System
Immobilizer system
(with advanced key) ................... 3-52
Immobilizer system
(without advanced key) .............. 3-56
Theft-deterrent system ............... 3-60
Service Publications .......................... 9-43
Shopping Bag Hook ........................ 6-153
Side Extention Sunvisors ................ 6-142
Spare Tire and Tool Storage ................ 7-3
Specifications .................................... 10-4
Speedometer ...................................... 5-39
SRS Air Bags
Driver and front passenger occupant
classification system .................. 2-53
How the SRS air bags work ....... 2-46
Limitations to SRS air bag ......... 2-51
Monitoring and maintenance ..... 2-58
SRS air bag deployment
criteria ........................................ 2-50
Supplemental restraint system
(SRS) precautions ...................... 2-41
Supplemental restraint system
components ................................ 2-45
Starting the Engine .............................. 5-4
Steering Wheel .................................. 3-63
Horn ........................................... 5-69
R
Rear Coat Hooks ............................. 6-153
Rear Door Child Safety Locks .......... 3-35
Rear Seat ........................................... 2-10
Rear Window Defroster .................... 5-68
Rearview Mirror ................................ 3-64
Recreational Towing ......................... 7-18
Registering Your Vehicle in A Foreign
Country ............................................. 9-17
Rocking the Vehicle ............................ 4-8
S
Safety Defects, Reporting ................. 9-41
Seat Belt System
3-point type ................................ 2-19
Automatic locking ...................... 2-18
Belt minder ................................. 2-25
Emergency locking .................... 2-17
Extender ..................................... 2-24
Pregnant women ........................ 2-17
Pretensioner and load limiting .... 2-21
Seat belt precautions .................. 2-15
Warning light/beep ..................... 2-25
11-6
Form No.8AS3-EA-09E
Index
S
Storage Compartments .................... 6-151

Center console .......................... 6-152
Glove box ................................. 6-151
Overhead console ..................... 6-151
Rear coat hooks ........................ 6-153
Shopping bag hook .................. 6-153
Storage pocket .......................... 6-151
Storage Pocket ................................ 6-151
Sunshade ........................................... 3-51
Sunvisors ........................................ 6-142
Towing
Description ................................. 7-17
Emergency towing ..................... 7-17
Recreational towing ................... 7-18
Trailer towing ............................. 4-12
Traction Control System (TCS) ........ 5-23
TCS OFF indicator light ............ 5-24
TCS OFF switch ........................ 5-24
TCS/DSC indicator light ............ 5-23
Trailer Towing .................................. 4-12
Trip Meter ......................................... 5-39
Trunk Lid .......................................... 3-35
Inside trunk release lever ............ 3-38
Trunk Light ....................................... 3-37
Turn and Lane-Change Signals ......... 5-63
T
Tachometer ........................................ 5-40
Temporary Spare Tire ....................... 8-34
Theft-Deterrent System ..................... 3-60
Tire Information ................................ 9-22
Tire Pressure Monitoring System ...... 5-27
System error activation .............. 5-31
Tire pressure monitoring system
warning light .............................. 5-29
Tires and wheels ......................... 5-31
Tires
Flat tire ......................................... 7-3
Inflation pressure ........................ 8-32
Replacement ............................... 8-34
Rotation ...................................... 8-33
Snow tires .................................... 4-9
Spare tire and tool storage ............ 7-3
Specifications ............................. 10-7
Tire chains .................................... 4-9
Uniform tire quality grading system
(UTQGS) ................................... 9-20
Tool ..................................................... 7-3
V
Vanity Mirrors ................................. 6-142
Vehicle Information Labels ............... 10-2
11-7
Form No.8AS3-EA-09E
Index
W
Warning Lights ................................. 5-43
ABS ............................................ 5-46
Air bag system ........................... 5-48
Automatic transaxle ................... 5-51
Brake system .............................. 5-45
Charging system ......................... 5-47
Check engine .............................. 5-47
Check fuel cap ........................... 5-49
Door-ajar .................................... 5-51
Electronic Steering Lock ............ 5-55
Engine oil pressure ..................... 5-47
Front seat belt pretensioner
system ........................................ 5-48
KEY ............................................ 5-53
Low fuel ..................................... 5-49
Low washer fluid level ............... 5-51
Powertrain malfunction/reduced
power .......................................... 5-48
Seat belt ...................................... 5-49
Tire pressure monitoring
system ........................................ 5-51
Warranty ............................................ 9-14
Washer Fluid ..................................... 8-27
Weights ............................................. 10-5
Wheel Replacement .......................... 8-35
Windows
Power windows .......................... 3-40
Windshield Washer ........................... 5-68
Windshield Wipers ............................ 5-65
Blades replacement .................... 8-28
Winter Driving .................................... 4-8
11-8
Form No.8AS3-EA-09E

2010 Mazda6 OM PDF

Uploaded by

Copyright:

Available Formats

2010 Mazda6 OM PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2010 Mazda6 OM PDF

Uploaded by

Copyright:

Available Formats

Mazda6_8AS3-EA-09E_Edition1 Page1

Wednesday, May 13 2009 2:22 PM

A Word to Mazda Owners

2009 Mazda North American Operations

How to Use This Manual

Index: A good place to start is the Index,

The symbol below, located on some parts

Essential Safety Equipment

Knowing Your Mazda

Before Driving Your Mazda

Driving Your Mazda

Maintenance and Care

Customer Information and Reporting Safety Defects

Your Vehicle at a Glance

Interior Overview ..........................................................................

Exterior Overview ......................................................................... 1-5

Your Vehicle at a Glance

Door-lock knob .................................................................................................. page 3-33

The equipment and installation position varies by vehicle

Your Vehicle at a Glance

Audio control switches ...................................................................................... page 6-81

The equipment and installation position varies by vehicle

Your Vehicle at a Glance

SRS air bags ...................................................................................................... page 2-41

The equipment and installation position varies by vehicle

Your Vehicle at a Glance

Hood .................................................................................................................. page 3-48

The equipment and installation position varies by vehicle

Your Vehicle at a Glance

Trunk lid ............................................................................................................ page 3-35

The equipment and installation position varies by vehicle

Essential Safety Equipment

Seats ............................................................................................... 2-2

Child Restraint ............................................................................

SRS Air Bags ...............................................................................

Essential Safety Equipment

Make sure the adjustable components

Make sure the lever returns to its original

Essential Safety Equipment

Do not drive with the seatback

Make sure the lever returns to its original

Essential Safety Equipment

qHeight Adjustment (Driver's Seat)

Front Seats (Electrically

Essential Safety Equipment

Essential Safety Equipment

qSeat Position Memory (Driver's

One-touch seat position programming and

Programming of the driver's seat positions

Essential Safety Equipment

Setting the driver's seat to a preprogrammed position

Operation using the seat-side buttons

Park the vehicle in a safe location before

In the following cases, the seat position set

1. Adjust the seat to the desired position.

Essential Safety Equipment

Operation using the advanced key/

After the following conditions have been

With retractable type key