Micro Fluidics Applications

Some applications of micro-fluidics
Micro-fluidics is the science and technology of manipulating and analyzing fluid flow in
structures of sub-millimeter dimensions. This field will be essential in a variety of future
high-tech applications, such as micro-channel cooling for electronics, inkjet printing for
displays and biomedical applications, controlled drug delivery systems, pharmaceutical
and chemical high-throughput testing, and biosensors. Considering the various
applications, the fluids to be manipulated may be quite complex, such as blood, saliva,
urine, or polymer solutions.
actuator
radio
battery
outlet
biosensor
reservoir
Figure 1: Artists impression of an electronic pill. The pill is steered through the body, and
releases, in a controlled way, medicine at a desired location and at the precisely controlled dose.
One example is controlled drug delivery. In this application, a drug delivery system is
either implanted in the human body, or attached to the skin, and medicine is released in a
controlled way into the body. Another option is to encapsulate the medicine in a
micrometer-sized container that is introduced into the human body, and which is
subsequently directed to a specific location where the medicine is released (the
electronic pill). Artificial cilia may well be a suitable means of achieving an actively
controlled drug release system. Important features that could be enabled are electronic
pill propulsion, and accurate dosing of liquids, for example to achieve correct mixing
ratios between two substances, or a deterministic amount of reagents.
Reaction chambers
(washing, mixing, reaction)
Sensor
Plastic cartridge
Micro-channels
Figure 2: Artists impression of a disposable cartridge, a key component of a biosensor device,

containing micro-fluidic structures.
Another example of a biomedical applications are biosensors. The purpose of a biosensor

device is to carry out a rapid and sensitive detection of specific bio-molecules such as
certain proteins or DNA, present in biological fluids (e.g. blood). On the basis of the
detection results, a medical diagnosis concerning the presence and/or progression of a
disease may be established. A key component of the device is a disposable cartridge,
schematically shown in Figure 2. It contains micro-channels through which the fluid must
be transported, reaction chambers and other structures in which various required actions
must take place (washing, separation of molecules, mixing, chemical reactions) and,
finally, a sensor at which the detection is done. The latter can be based on various
physical principles, for example optical, magnetic, or electrical detection. A characteristic
of this integrated device is that it is relatively small, typically of credit-card size, in order
to minimize the required amounts of test fluid and chemical species, to speed up the
detection time, and to create a well-controlled environment. The typical cross-sectional
dimensions of the micro-fluidic channels and structures are between 10 and 100 m. The
importance of getting the fluid at the right time at the right position is obvious. In
addition, the process requires that mixing flows (in reaction chambers), or special flow
patterns (e.g. at the sensing location) be generated locally. Controlled fluid manipulation
at these small scales, i.e. the domain of micro-fluidics, is therefore indispensable for the
development of biosensor devices.
The development of biosensors and related molecular diagnostics is a major contribution
to addressing one of the most important societal issues in the world today, which is that
of health and medical care, in relation to economic boundary conditions. Compared to
conventional central laboratory testing for medical diagnosis, the biosensor approach will
lead to lower costs, and much faster and targeted diagnosis. The availability of actively
controlled drug delivery systems would open new ways to treat diseases in a targeted and
effective way. In particular for biosensor-type applications, which belong to the category
of molecular diagnostics devices, the projected market growth is very large. At the
moment some initial applications are on the market, e.g. for glucose level testing, or for
drug-of-abuse testing. The total biosensor market in 2000 was 550 MEuros. The
predictions now are that in a few years the total market value will be over 3.5 billion
Euros, corresponding to an annual growth of 35%.
In addition, applications of micro-fluidics can for example be found in the areas of

micro-channel cooling for electronics, inkjet printing for displays and biomedical
applications, and pharmaceutical and chemical (high-throughput) testing in the chemical
and food industries.
Figure 3: Micro-channels for cooling are integrated in electronic devices.
The micro-fluidics, obviously, is essential in all these developments. Often, not only
transport of the fluid is needed, also local mixing (for example in micro-reaction
chambers), or specific flow pattern generation (for example near the biosensor detection
site), are desired. Various actuation mechanisms have been and are being developed.
Some of these are arrived at by simply scaling down established macroscopic concepts to
smaller dimensions, as e.g. in most micro-fabricated mechanical valves or pumps. The
smallest sizes achieved mostly are still on the order of millimeters or several hundreds of
micrometers, so that a true integration in a micro-fluidic device is not possible. Others
use physical effects that are predominant at small scales, such as surface tension.

Micro Fluidics Applications

Uploaded by

Copyright:

Available Formats

Micro Fluidics Applications

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Micro Fluidics Applications

Uploaded by

Copyright:

Available Formats

Some applications of micro-fluidics

Figure 2: Artists impression of a disposable cartridge, a key component of a biosensor device,

Another example of a biomedical applications are biosensors. The purpose of a biosensor

In addition, applications of micro-fluidics can for example be found in the areas of

Figure 3: Micro-channels for cooling are integrated in electronic devices.

You might also like