Repsol Industrial Catalogue

LUBRICANTS
for Industry
We present you our Lubricants Catalogue for Industry.

In a sector such as this one in Industry, where new technological breakthroughs are introduced daily, in our company Repsol YPF Lubricants and Specialities, S.A. we work to develop
a wide range of industrial lubricants. To achieve this, we put in all our efforts in terms of
resources, research and technology.
Throughout the entire processing of our lubricants, from the design stage to manufacture,
we work with the best standards and the most demanding quality regulations. Only in this
way we can ensure that the machines and systems which select Repsol for its industries can
be perfectly lubricated.
We are certain that this is the best possible investment to improve the working life of your
systems and, therefore, we are pleased to be able to offer all the qualities required from our
lubricants to protect them, boosting their functions, improving their performance, contributing to economice energy and prolonging their useful life.
This is what we have been demonstrating to date and we pretend to continue in the future,
both in daily life and in the large scale industrial challenges that are our best test bank.
Repsol industrial lubricants are the best for your machines and industrial systems.
LUBRICANTS FOR INDUSTRY

INDEX
HYDRAULIC OILS
Page
4REPSOL HIDROFLUX HL ....................................................................................................................................

4REPSOL TELEX .....................................................................................................................................................
4REPSOL HIDROFLUX EP . ...................................................................................................................................
4REPSOL TELEX E ..................................................................................................................................................
4REPSOL TELEX HVLP ..........................................................................................................................................
4REPSOL HIDRULICO SC ..................................................................................................................................
4REPSOL HIDRLEO ............................................................................................................................................
4REPSOL TELEX W ................................................................................................................................................
4REPSOL HIDRULICO C-3 EP ...........................................................................................................................
GEAR OILS
4
4
4
5
5
6
6
7
7
Page
4REPSOL TAURO . ................................................................................................................................................. 8

4REPSOL SPER TAURO ...................................................................................................................................... 8
4REPSOL SPER TAURO SINTTICO ................................................................................................................. 9
4REPSOL SPER TAURO PAG ............................................................................................................................. 10
4REPSOL ZEUS EP GL-5 ........................................................................................................................................ 10
TURBINES AND COMPRESSORS
Page
4REPSOL ARIES ...................................................................................................................................................... 11

4REPSOL TURBO ARIES ....................................................................................................................................... 11
4REPSOL ARIES TURBO GAS . ............................................................................................................................. 12
4REPSOL ARIES TURBO GAS CC ........................................................................................................................ 12
4REPSOL COMANDER EHC . ............................................................................................................................... 13
4REPSOL MERAK VDL .......................................................................................................................................... 13
4REPSOL SINTTICO THOR ................................................................................................................................ 13
REFIGERATION OILS
Page
4REPSOL POLAR ................................................................................................................................................... 14

SLIDEWAYS OIL
Page
4REPSOL ZEUS GUA ............................................................................................................................................ 14

HEAT TRANSFER OILS
Page
4REPSOL MULTIGRADO TRMICO ................................................................................................................... 14

4REPSOL HELIOTERMO 2550 ............................................................................................................................. 15
GENERAL PURPOSE OILS
Page
4REPSOL MULTIUSO EXTRA ............................................................................................................................... 15

4REPSOL V-W ........................................................................................................................................................ 15
ROLLING OILS
Page
4REPSOL CIRCULACIN . .................................................................................................................................... 16

4REPSOL CIRCULACIN EP ................................................................................................................................ 16
PNEUMATIC TOOLS
Page
4REPSOL ASTRA .................................................................................................................................................... 17
NDEX
ELECTRICAL OILS
Page
4REPSOL ELECTRA 3 . ........................................................................................................................................... 17

4REPSOL TENSIN CENTAURO . ........................................................................................................................ 17
STEAM OILS
Page
4REPSOL HELEN .................................................................................................................................................... 18

QUENCHING OILS
Page
4REPSOL IBERTEM 15 .......................................................................................................................................... 19

4REPSOL IBERTEM 15 R ....................................................................................................................................... 19
4REPSOL IBERTEM 24 .......................................................................................................................................... 19
4REPSOL IBERTEM 34 .......................................................................................................................................... 19
4REPSOL IBERTEM 99 F ....................................................................................................................................... 19
CUTTING OILS
Page
4REPSOL IBERCUT EDM 2 ................................................................................................................................... 20

4REPSOL IBERCUT 12 AM ................................................................................................................................... 20
4REPSOL IBERCUT 20 C ....................................................................................................................................... 20
4REPSOL IBERCUT 30 A ....................................................................................................................................... 20
4REPSOL IBERCUT A . ........................................................................................................................................... 20
TECHNICAL CHARACTERISTICS
Pages 22 - 25
COMMERCIAL PRESENTATIONS
Pages 26 - 28

HYDRAULIC OILS
REPSOL HIDROFLUX HL
CHARACTERISTICS
Mineral, highly refined paraffin oils. Their specially selected

additives improve their stability against oxidation and corrosion.
Recommended for hydraulic circuits under moderate working
conditions. They are also suitable for all types of machinery
where R&O type oils are required.
=RESISTANCE TO AGEING AND FORMING SLUDG

=HIGH VISCOSITY INDEX
=EASILY SEPARATED FROM WATER
=EXCELLENT ANTI-FOAM PROPERTIES
iSO GRADES: 32, 46 and 68.

QUALITY LEVEL: ISO 11158 - 6743/4: HL
REPSOL TELEX
CHARACTERISTICS
Oils designed for hydraulic circuits requiring lubricants with

anticorrosion, antioxidizing and antifoaming properties. They are
formulated with select bases to give high stability.
=LOW FREEZING POINT

=RESISTANCE TO OXIDATION AND SLUDGE
FORMING
They are specially indicated for hydraulic circuits of general use,

for example in machine tools, heads, gear boxes, speed variators,
among others.
=HIGH AIR REMOVAL CAPACITY

=ANTI-WEAR CAPACITY
ISO GRADES: 32, 46, 68 and 100.

QUALITY LEVEL: ISO 11158 - HL

DIN 51524 - HL
REPSOL HIDROFLUX EP
CHARACTERISTICS
The lubricants included in this range are manufactured with

selected bases and additives carefully added to obtain hydraulic
oils for general use.
=RESISTANCE TO OXIDATION, AGEAING AND

SLUDGE FORMING
Oils highly appropriate for the majority of hydraulic circuits,

including those requiring special anti-wear protection, both in
industry and in automotion (dumpers, public works machinery,
etc.) regardless of the type of pump fitted or the pressures
worked at.
=LOW FREEZING POINT

=JOINT COMPATIBLE
=GOOD ANTI-FOAMING PROPERTIES
=NOTABLE ANTI-WEAR PROPERTIES
ISO GRADES: 22, 32, 46, 68, 100 and 150.

CUALITY LEVEL: ISO
11158 - HM

DIN 51524 - HLP
Customer service: +34 901 111 999

HYDRAULIC OIL
REPSOL TELEX E
CHARACTERISTICS
Oils specially designed for use in hydraulic circuits requiring

lubricants with notable anti-wear properties. Produced with
carefully selected bases with the addition of specific additives to
improve their properties considerably.
=HIGH RESISTANCE TO OXIDATION AND SLUDGE

FORMING
=LOW FREEZING POINT
Specially indicated for hydraulic circuits and public works

machinery, giving high performance for extreme pressure working
conditions where reaching and exceeding maximum anti-wear
levels is required according with international standards.
=HIGH AIR RELEASED CAPACITY

=ANTI-FOAM AND ANTI-RUSTING HIGH QUALITIES
=EXCELLENT FILTRABILITY
ISO GRADES: 5, 10, 15, 22, 32, 46, 68 and 100.
=COMPATIBILITY WITH JOINTS AND GRIPS
QUALITY LEVEL: ISO 11158 - HM

=EXCELLENT DEMULSIBILITY
=EXCELLENT LOAD CAPACITY
DIN 51524 - HLP

DENISON HF - 0
=HIGH THERMAL AND HYDROLITHIC STABILITY
REPSOL TELEX HVLP
CHARACTERISTICS
Special oils for hydraulic circuits subject to changes of

temperature and where good anti-wear properties are required.
Also specific for hydraulic circuits outdoors or with low
temperatures and for systems where it is essential to maintain
viscosity variations well below those of a normal fluid.
=HIGH RESISTANCE TO OXIDATION, AGEING AND

SLUDGE FORMING
=EXCELLENT ANTI-WEAR PROPERTIES
=VERY HIGH VISCOSITY INDEX
Excellent performance in hydraulic systems for all types of public

works machinery.
=EXCELLENT WATER SEPARATION

=VERY GOOD ANTI-FOAMING QUALITIES
ISO GRADES: 32, 46 and 68.
=EXCELLENT METAL PROTECTION AGAINST

CORROSION
QUALITY LEVEL: ISO 11158 - HV
=COMPATIBILITY WITH THE JOINTS NORMALLY

USED IN HYDRAULIC CIRCUITS
DIN 51524 - HVLP
=HIGH CAPACITY TO WITHSTAND LOAD


HYDRAULIC OILS
REPSOL HIDRULICO SC
CHARACTERISTICS
Top quality oils for hydraulic circuits.
=HIGH RESISTANCE TO AGEING AND TO SLUDGE

FORMINGs
Manufactured from paraffin bases with ashless technology.
=EXCELLENT EP PROPERTIES
Include special additives for hydraulic systems with extremely

fine tolerance servo-valves where an excellent filterability in the
hydraulic fluid is required.
=VERY EASY WATER SEPARATION
=EXTREMELY HIGH CAPACITY TO ELIMINATE AIR

=EXCELLENT FILTERABILITY
=GOOD ANTI-IRON RUST AND ANTI-CORROSION
QUALITY LEVEL: ISO 11158 - HM

=COMPATIBLE WITH JOINTS AND ELASTOMERS
DIN 51524 - HLP
REPSOL HIDRLEO
CHARACTERISTICS
Oils manufactured with top quality bases from paraffin crude oils
subject to a refining process to give it high stability against rust
and a high viscosity index. The additives used in the formulation
are of the ashless type. Using in the formulation, ashless type
additives.
=EXCELLENT ANTI-WEAR PROPERTIES

=LOW FREEZING POINT
=GOOD ANTI-IRON RUST AND ANTI-CORROSION
POWER
=VERY GOOD WATER SEPARATION PROPERTIES
(DEMULSIBILITY))
Recommended for systems working in a very harsh regime where

filterability is very demanding, such as in servo-valves or control
systems. Also for use in hydraulic motors working at very high
pressure and temperature loads where there are wide variations
in the temperature range.
=RESISTANCE TO FOAM FORMING AND EXTREMELY

EASY AIR RELEASE
=HIGH RESISTANCE TO OXIDATION. EXCELLENT
THERMAL STABILITY
ISO GRADES: 32, 46, 68 and 100.
=EXCELLENT FILTERABILITY
QUALITY LEVEL: ISO 11158 - HV
=VERY GOOD PERFORMANCE IN JOINTS AND

ELASTOMERS
DIN 51524 - HVLP

HYDRAULIC OILS
REPSOL TELEX W
CHARACTERISTICS
High quality multigrade oil produced with highly refined paraffin

based oils, including specially selected additives to improve
characteristics such as resistance to oxidation, high anti-wear and
detergency-dispersion power, among others.
=EXCELLENT ANTI-OXIDIZING PROPERTIES

=HIGH ANTI-WEAR POWER
=GOOD AGEING RESISTANCE
A product primarily designed for working as a hydraulic fluid in

public works machinery requiring this viscosimetric grade, as well
as some transmissions incorporated in these systems.
=LOW FREEZING POINT

=HIGH DETERGENT-DISPERSANT POWER
VISCOSITY GRADES: SAE 10 W/20.

QUALITY LEVEL: GM Allison type C-4

Caterpillar TO-2
REPSOL HIDRULICO C-3 EP
CHARACTERISTICS
Repsol Hidrulico C-3 EP oils are hydraulic transmission fluids

manufactured with high refined paraffin bases, with a special
additive to comply with the requirements for GM Allison type
C-3 fluids. They have exceptional resistance to oxidation, iron
rust and to foam as well as anti-wear qualities.
=ANTI-RUST PROPERTIES
=GOOD STABILITY AGAINST FOAM FORMING
=EXCELLENT RESISTANCE TO AGEING AND SLUDGE
FORMING
Recommended for hydraulic transmissions in lorries, buses and

coaches, Public Works and Mining machinery, which are subject
to very harsh conditions. May also be used in conventional
hydraulic circuits.
=LOW FREEZING POINT

=GOOD COMPATIBILITY WITH JOINTS
=GOOD VISCOSITY PERFORMANCE AT HIGH
TEMPERATURES
ISO GRADES: 32 and 46.

QUALITY LEVEL: GM Allison type C-3


GEAR OILS
REPSOL TAURO
CHARACTERISTICS
These oils, designed for lubricating all types of industrial gearing,

are obtained by incorporating a series of selected additives in
the bases, including sulphur-phosphor, to give them their specific
extreme pressure (EP) characteristics.
=HIGH RESISTANCE TO BREAKAGE OF THE

LUBRICATING FILM
=GOOD STABILITY AGAINST RUSTING
=PROTECTION AGAINST IRON RUSTING
Specially indicated for all types of reducing gears or industrial

multipliers lubricated by sputtering or flow, whether they
incorporate pre-heating systems or otherwise, or even oil cooling.
=REDUCE VIBRATIONS, KNOCKS OR NOISE
QUALITY LEVEL: ISO 6743/6 - CKC

DIN 51517 - CLP
ANSI/AGMA 9005-E02 - EP
REPSOL SPER TAURO
CHARACTERISTICS
Oils developed for lubricating all types of industrial gearing,

including heavily loaded gearing operating in harsh conditions.
Obtained by incorporating additives to the selected high viscosity
bases in order to improve properties such as resistance to rust,
foam forming, anti-iron rusting and including sulphur-phosphor
additives to give excellent properties at extreme pressure (EP).
=REDUCE WEAR IN EXTREME LUBRICATION

CONDITIONS
=EXCELLENT STABILITY AGAINST RUST
=VERY GOOD ANTI-IRON RUST PROTECTION
=HIGH CAPACITY TO SEPARATE WATER
=NON-CORROSIVE AGAINST STEEL OR ITS ALLOYS
Highly appropriate for all cases requiring maximum levels of

resistance to rust and/or load capacity.
=GOOD ANTI-FOAM CHARACTERISTICS

=RESISTANCE TO BREAKAGE OF LUBRICANT FILM
ISO GRADES: 68, 100, 150, 220, 320, 460, 680 and 1.000.
QUALITY LEVEL: ISO 6743/6 - CKD

=NON-CORROSSIVE AGAINST STEEL OR ITS ALLOYS

=GOOD PERFORMANCE IN THE PRESENCE OF
WATER
ISO GRADES: 100, 150, 220, 320, 460 and 680.
=STABILITY AGAINST FOAM FORMING
DIN 51517 - CLP


GEAR OILS
REPSOL SPER TAURO SINTTICO
CHARACTERISTICS
High performance lubricant fluids, formulated with specially

selected synthetic bases (PAO, esters) and latest generation
additives. Ideal for harsh applications with high loads, low speeds
and high/low temperatures.
Mainly designed for bearings and industrial gearing working in
harsh conditions and in a wide range of temperatures. Includes
all systems working by forced oil flow, bath or spatter. Especially
appropriate for working in high temperatures, its excellent
resistance to rust makes it possible to extend changeover periods,
thus saving on costs of oil change, cleaning and stopping systems.
=EXCEPTIONAL RESISTANCE TO RUST AT HIGH

TEMPERATURE
=VERY LOW FREEZING POINT
=VERY HIGH VISCOSITY INDEX, ALLOWING
FOR LUBRICATION IN A WIDE RANGE OF
TEMPERATURES
=LOWER FRICTION COEFFICIENT THAN
CONVENTIONAL OILS
=COMPATIBLE WITH ELASTOMERS AND JOINTS
=MISCIBLE WITH MINERAL OILS
ISO GRADES: 100, 150, 220, 320 and 460.
=EXCELLENT WATER SEPARATION AND ANTI-FOAM

PROPERTIESS
QUALITY LEVEL:ISO 6743/6 - CKT
=VERY GOOD PROTECTION AGAINST IRON RUST

AND CORROSION
DIN 51517 - CLP

=OPTIMUM EP PROPERTIES
=GOOD RESISTANCE TO THE PHENOMENON OF
MICROPITTING


GEAR OILS
REPSOL SPER TAURO PAG
CHARACTERISTICS
High performance lubricants, 100% synthetic polyglycol based.

Incorporate latest generation additives, making them ideal for
harsh applications in a wide range of temperatures, from -30C
to temperatures of over 200C. Developed to provide added
protection against corrosion.
=EXCEPTIONAL RESISTANCE TO RUST AT HIGH

TEMPERATURE
=LOW FREEZING POINT
=EXCEPTIONAL FRICTION COEFFICIENT
Bearings and industrial gearing working in very harsh conditions

and at high temperatures, high loads and considerable sliding
such as wormscrews. Also applicable for ball-bearings and in
mechanisms in general requiring EP lubricants with high thermal
stability. Due to its excellent resistance to rust, it is possible to
extend the change-over periods.
=MINIMUM FORMATON OF DEPOSITS

=VERY GOOD PROTECTION AGAINST IRON RUST
AND CORROSION
=OPTIMUM EP PROPERTIES AND MICROPITTING
As a precaution, it is not miscible with mineral oils. So it is

essential to clean the equipment when changing from a mineral
oil to Super Tauro PAG.
ISO GRADES: 150, 220, 320, 460, 680 and 1.000.

The viscosity grades 680 and 1,000 have been developed with
bases to allow for a certain degree of contamination with water,
while maintaining its characteristics.
QUALITY LEVEL: ISO 6743/6 - CKT

DIN 51517 - CLP
REPSOL ZEUS EP GL-5

Extreme pressure oils specially developed to meet the lubrication
requirements of all types of gearing, both industrial and hypoid
used in automotion. With these, it is possible to achieve an
interesting unification of oils in plants where, apart from
industrial gearing, there is also a large number of or intensely
used automotion gearings.
VISCOSITY GRADES: SAE 80W, SAE 90 and SAE 140.

QUALITY LEVEL:API GL - 5
MIL-L - 2105-D
CHARACTERISTICS
=CONSIDERABLE LOAD CAPACITY
=LOW FREEZING POINT
=COMPATIBLE WITH TRADITIONAL OILS FOR
GEARBOXES AND TRANSMISSIONS

10

REPSOL ARIES
CHARACTERISTICS
A wide range of oils obtained from paraffin bases, incorporating

additives to inhibit rust, iron rust and anti-foam, giving them
excellent properties and an excellent performance in service.
=HIGH RESISTANCE TO AGEING AND SLUDGE

FORMING
The lower viscosity oils (ISO grades 7, 15 and 22) are generally
used in large adjustment or highly revved mechanisms. The ISO
grades ranging from 32 to 100 inclusive are normally used in
turbines, preferably steam or hydraulic turbines, but are also
suitable for compressors, hydraulic systems, etc. The higher
viscosity oils (types 125, 150, 220 and 380) are suitable for
lubricating diverse mechanisms in the crankcase or by circulation.
Apart from the ISO viscosity grades specified, there is a 125 cSt
and a 380 cSt oil at 40C available.
=EXCELLENT ANTI-FOAM PROPERTIES AND AIR

ELIMINATION CAPACITY
=VERY EASILY SEPARATED FROM WATER AND
RESISTANCE TO IRON RUSTING
VISCOSITY GRADES: 7, 15, 22, 32, 46, 68, 100, 125, 150,
220 and 380.
QUALITY LEVEL:
Compressors: DIN 51506 - VCL
Turbines: ISO 6743/5 - TGA/TSA
DIN 51515 - L-TD
DIN 51506 - VBL
DIN 51524 - HL
DIN 51517 - CL
REPSOL TURBO ARIES

Oils formulated with mineral bases and additives giving them
excellent characteristics of resistance to rust, anti-foam, anti iron
rust and water separation capacity.
CHARACTERISTICS
Specially recommended for steam turbines in nuclear and thermal

plants and combined cycles requiring oils inhibited against rust,
providing a very long duration in service. Can also be applied in
all uses of Aries to give greater durability.
=EXTRAORDINARY RESISTANCE TO AGEING AND

SLUDGE FORMING
=HIGH ANTI IRON RUST POWER
=EXCELLENT ANTI-FOAM QUALITIES
=VERY GOOD WATER SEPARATION
QUALITY LEVEL:
Compressors: DIN 51506 - VCL
Turbines: ISO 6743/5 - TGB/TSA
DIN 51515 - L-TG
REPSOL TURBO ARIES EP
ISO GRADES: (80).
In this type of oil, an 80 cSt oil is used at 40C incorporating

extreme pressure additives.
QUALITY LEVEL: ISO 6743/5

11

REPSOL ARIES TURBO GAS
CHARACTERISTICS
Oil formulated with highly refined mineral bases and with

selected additives to give the final product excellent resistance
properties to rust, iron rusting, water separation and anti-foam.
Includes extreme pressure additives so that it can be used in
systems incorporating reducing gears.
=VERY GOOD RESISTANCE TO AGEING AND SLUDGE

FORMING
=COMPATIBLE WITH CALCIUM
=HIGH WATER SEPARATING CAPACITY
Especially appropriate for turbines and compressors fitted with

reducing gears.

=GOOD AIR SEPARATION
Extreme pressure properties required.
=HIGH EXTREME PRESSURE (EP) PROPERTIES)

QUALITY LEVEL: ISO 6743/5 - TGE/TSE
DIN 51515 - L-TGP
REPSOL ARIES TURBO GAS CC
CHARACTERISTICS
Oil produced with hydrotreated bases, specially designed for

lubricating latest generation gas turbines and combined cycles.
Basically characterized by an exceptional resistance to rust, which
multiplies its useful life in service. Includes extreme pressure
additives to give lubrication for reducing gear boxes located in
the generating turbine shaft.
=EXCEPTIONAL RESISTANCE TO AGEING AND

SLUDGE FORMING
Lubricant appropriate for gas turbine, steam turbines and turbocompressor working at high temperatures demanding a high
performance from the lubricant. Presents optimum results for
lubricating ammonia compressors.
=GOOD WATER SEPARATION

=HIGH WATER SEPARATING POWER
=OPTIMUM EXTREME PRESSURE PROPERTIES
ISO GRADES: 32 and 46..

QUALITY LEVEL: ISO 6743/5 - TGE/TSE
DIN 51515 - L-TGP

12

REPSOL COMANDER EHC
CHARACTERISTICS
A hydraulic, high performance, fire resistant fluid, designed

for use in electro-hydraulic control systems in steam turbines,
including systems using fine tolerance servo-valves.
=FIRE RESISTANT (MUTUAL-STANDARD-6930)

=EXCELLENT ANTI-WEAR CAPACITY
Steam turbine control systems in conventional thermal and

nuclear power plants and combined cycles.
ISO GRADE: 46.

QUALITY LEVEL: ISO 6743/5 - TCD-TCD
REPSOL MERAK VDL
CHARACTERISTICS
Apart from extraordinary quality base oils, this carefully

formulated oil incorporates additives essential for increasing
resistance to rust and to ensure good anti-wear properties as well
as protection against corrosion.
The Merak VDL oils are specially recommended for lubricating
rotary and alternative compressors, either using air or inert gases,
with high discharge temperatures (up to 220C).
=MINIMUM TENDENCY TO FORM DEPOSITS

=EXCELLENT RESISTANCE TO RUST
=GOOD AIR REMOVAL CAPACITY
=HIGH LOAD CAPACITY
ISO GRADES: 32, 46, 68 and 100.

QUALITY LEVEL: Quality DIN 51506 - VDL
REPSOL SINTTICO THOR

Synthetic fluid developed for lubricating compressors requiring
maximum durability of oil in service.
ISO GRADE: 100.

QUALITY LEVEL: Quality DIN 51506 - VDL
CHARACTERISTICS
=LONGER DRAINING INTERVALS
=REDUCTION OF DEPOSITS OF VARNISH AND
SLUDGE
=REDUCTION OF LUBRICANT CONSUMPTIONE
=REDUCTION OF MAINTENANCE COSTS

13

REFRIGERATION MACHINERY
REPSOL POLAR
CHARACTERISTICS
Various naphtenic oils for coldstore machine compressors, using

ammonia or carbon dioxide, among others. With excellent
lubrication power for industrial systems and low freezing points.
=HIGH RESISTANCE TO RUST

=HIGH CHEMICAL RESISTANCE
=MINIMUM CARBON FORMING
=LOW FREEZING POINT
QUALITY LEVEL: Quality DIN 51506 - KAA, KC
SLIDEWAYS
REPSOL ZEUS GUA
CHARACTERISTICS
Lubricant oils specially formulated for lubricating horizontal

and vertical slideways on machine tools. Produced with mineral
oils obtained from highly refined paraffin bases and a special
selection of latest generation additives. These include specific
additives designed to improve their adhering qualities, extreme
pressure and anti stick-slip.
=EXCELLENT SLIPPERINESS
=LOW STATIC FRICTION COEFFICIENT
=SPECIALLY DESIGNED TO MINIMIZE THE EFFECT OF
START-UP/STOP
ISO-32 and 68 grades are used as hydraulic fluids in systems

where, apart from the hydraulic circuit, it is necessary to lubricate
the slideways.
ISO GRADES: 32, 68, 150 and 220.

QUALITY LEVEL:ISO 6743/13 - G
Cincinnati Machine P
-53 (ISO 32)
P-47 (ISO 68)
P-50 (ISO 220)
HEAT TRANSFER
REPSOL MULTIGRADO TRMICO
CHARACTERISTICS
Fluid formulated especially for use as a heat transmission agent.

It is formulated with highly refined mineral bases, with a specific
additivation to give it an extraordinary resistance to rust.
=HIGH THERMAL STABILITY AND RESISTANCE TO

RUST
=LONG LIFE IN SERVICE
A specific oil for use in heat transmission systems in closed circuit

and with forced flow, where maximum working temperatures are
around 300C.
=WIDE RANGE OF OPERATION TEMPERATURES
QUALITY LEVEL: ISO 6743/12 - QB
=NON-CORROSIVE

14
=GOOD HEAT TRANSMISSION COEFFICIENT

=LOW TENDENCY TO FORM CARBONOSE WASTE
HEAT TRANSFER
REPSOL HELIOTERMO 2550
CHARACTERISTICS
Product developed for use as a heat transmission fluid.

Manufactured with selected bases, additivized to give an
extraordinary resistance to rust. A specific oil for use in heat
transmission systems where temperatures are not over 290C.
=HIGH THERMAL STABILITY

=LONG LIFE IN SERVICE
=LOW TENDENCY TO FORM CARBONOSE WASTE
=NON-CORROSIVE
QUALITY LEVEL: ISO 6743/12 - QB
GENERAL GRASING
REPSOL MULTIUSO EXTRA
CHARACTERISTICS
General greasing oils very suitable for lost greasing applications

(oil pot, brush ).
Specially recommended for lubricating chainsaw chains.
=GOOD ANTI-CORROSION PROTECTION
=NOTABLE SLIPPERINESS
VISCOSITY GRADES: SAE 30 and 40

QUALITY LEVEL: ISO 6743/1 - AN
REPSOL V-W
CHARACTERISTICS
The Repsol V-W product range is recommended for all types of

mechanisms requiring lost greasing lubrication where greasing
conditions do not require any specific qualities.
=HIGH QUALITY FOR OILS NON-INHIBITED OILS

=GOOD SLIPPERINESS
ISO GRADES: V: 15, 46 and 68
=EXCELLENT LUBRICITY
W: 100, 130 cSt a 40 C and 150
=LOW FREEZING POINT

15

ROLLING OILS
REPSOL CIRCULACIN
CHARACTERISTICS
These oils are manufactured from carefully selected and

especially treated paraffin bases, giving to the finished
products high viscosity indexes, good resistance to rust and
excellent demulsifiability. Available in the viscosity grades used
traditionally in lubrication of bearings in rolling mills
(MORGAN and DANIELI).
Oils typical for lubricating by circulation of bearings subject

to very harsh service. Due to their characteristics, they are also
suitable for crankcases in some compressors requiring these
viscosities and not requiring oils with anti-wear capacity.
=GOOD ANTI-IRON RUST PROPERTIES
=LOW FREEZING POINT

=HIGH STABILITY
=LOW CARBON WASTE
=GOOD WATER SEPARATION
GRADOS ISO: 220, 320, 390 cSt a 40C,

460 and 680.
NIVEL DE CALIDAD: ISO 6743/2 - FC

DIN 51517 - CL
DIN 51524 - HL
REPSOL CIRCULACIN EP
These oils are manufactured from carefully selected paraffin
bases and especially treated, giving notable extreme pressure
properties.
Oils for lubricating bearings subject to very harsh services,
including strong water contamination, normally used in rolling
mills (MORGAN and DANIELI). Due to its characteristics, also
suitable for lubricating industrial reducing gears not subject to
knocks, although subject to medium loads.
ISO GRADES: 100, 220, 320, 460 and 680.

QUALITY LEVEL: ISO 6743/2 - FD
CHARACTERISTICS
DIN 51517 - CL
DIN 51524 - HLP

=LOW FREEZING POINT
=LOW CARBON WASTE
=EXCELLENT WATER SEPARATION
=VERY GOOD ANTI-IRON RUST PROPERTIES
=NOTABLE EXTREME PRESSURE PROPERTIESIN

16
ONEUMATIC TOOLS
REPSOL ASTRA
CHARACTERISTICS
Extreme pressure oils, especially indicated for lubricating drills,

hammers and pneumatic tools, even in harsh working conditions.
Also for pneumatic mechanisms requiring a fluid with capacity to
capture water drops to avoid contact with metal surfaces.
=GOOD ANTI-CORROSION AND ANTI IRON RUST

CHARACTERISTICS, BOTH AT HIGH AND LOW
TEMPERATURES
=FORMS STABLE EMULSIN WITH WATER

=GOOD ADHESION
QUALITY LEVEL: ISO 6743/11 - PAC and PBC
ELECTRICAL OILS
REPSOL ELECTRA 3
CHARACTERISTICS
An uninhibited oil produced from highly refined paraffin bases.
=HIGH DIELECTRICAL POWER

=VERY GOOD HEAT DISSIPATION
It possesses an excellent natural stability against rust, good

dielectric rigidity and good behaviour at low temperatures.
=HIGH STABILITY AGAINST RUST

=LOW DIELECTRICAL LOSS (DISSIPATION FACTOR)
Suitable as a insulating fluid for all types of electric equipment

and switch gearing.
=LACK OF MOISTURE AND SOLIDS IN SUSPENSION

=FULLY EXEMPT FROM PCBs AND PTCs
QUALITY LEVEL: IEC - 60296:2003
REPSOL TENSIN CENTAURO

An uninhibited oil produced from refined gasoline bases.
Especially recommended as an insulating fluid in electric
equipment and switch gearing.
It offers high stability against rust, excellent dielectric rigidity
and good properties at low temperatures.
QUALITY LEVEL: IEC - 60296:2003

17

STEAM MACHINES
REPSOL HELEN
CHARACTERISTICS
Mineral oils produced from a blend of paraffin and synthetic

bases, designed for lubricating steam machine cylinders. Able to
maintain a highly stable lubricating film between metal parts in
contact, and avoid steam leaks, either through valves, pistons or
gaskets.
=EXCELLENT SLIPPERINESS
=HIGH FLASH POINT
=MINIMUM LOSSES DUE TO VOLATILITY
=LOW CARBONOSE WASTE
Used according to increasing order of viscosity, for saturated

steam, re-heated steam and with a high degree of re-heating.
Valid for general greasing, low loaded greasing and other
mechanical elements and other mechanical elements where high
temperature conditions may occur.
Can be used as heat transfer fluids in the case of thermal circuits
open to the free air.
ISO GRADES: 460 (140), 680 (200) and 1.000 (240).

QUALITY LEVEL: DIN 51510 - ZA (Grade 200)

ZB (Grade 240)
ISO 6743/6 - CKB
ISO 6743/12 - QA

18
QUENCHING OILS
Paraffin based mineral oils in a wide range of viscosities, formulated with refined bases and additives to give adequate cooling velocities
depending on the process in point.
REPSOL IBERTEM 15
REPSOL IBERTEM 34
Low viscosity oil indicated for use in normal hardening

velocity work where the bath temperature ranges from 40C
to 80C.
For fast hardening of hot steel where the bath temperature

ranges from 85C to 125C at a closed environment over
95C.
REPSOL IBERTEM 15 R
REPSOL IBERTEM 99 F
Application similar to the IBERTERM 15 with a slightly lower

cooling velocity.
The Iberterm-99 F is specially designed for use in fast

hardening works at heat where the bath temperature
ranges from 150 to 180C, and even higher if in a closed
environment. This type of oil is used with carbonized steel
parts or low alloy content parts. It is advisable to consult the
technical department in view of the special characteristics
for use.
REPSOL IBERTEM 24
For fast hardening of carbonized steel with high hardness.
It is advisable to consult the technical department in view of the special characteristics for use.

19

CUTTING OILS
Oils prepared with paraffin based refined oil bases with
additives specially selected for machining processes.
REPSOL IBERCUT EDM 2

REPSOL IBERCUT 12 AM
REPSOL IBERCUT 20 C
REPSOL IBERCUT 30 A
REPSOL IBERCUT A

20
TRADE PRESENTATIONS
HYDRAULIC OILS

32
ISO
GRADE
32
VISCOSITIES
cSt (40 C)
cSt (100 C)
Point of
Viscosity Rate
Pour Point (C)
32 5,3 95
-9
Flash Point (C)
Mn FZG
Scale
190 6
Time for
neutralization
N 2 (h)
Quality
Level
DIN 51524
>2500
HL
46 46 46 6,7 95
Hidroflux HL
-9
200 6
>2500
HL
68 68 68 8,5 95
-9
215 6
>2500
HL
32 5,3 98
-24
218 8
>1000
HL
46 46 46 6,7 98
Telex
68 68 68 8,8 98
32
-24
230 8
>1000
HL
-24
240 8
>1000
HL
-24
250 8
>1000
HL
100

32
100
100
11 97
22
22
22 4,3
103
-24
202
10
>1500
HLP
32
32
32 5,3 98
-24
218
10
>1500
HLP
46 46 46 6,7 98
Hidroflux EP
68 68 68 8,8 98
-24
230
10
>1500
HLP
-24
240
10
>1500
HLP
100
100
100
11 97
-21
250
10
>1500
HLP
150
150
150
14,6 96
-21
252
10
>1500
1,6
-27
110
>1000
HLP
5 5 5
10
10
10
2,7
108
-24
146
>1000
HLP
15
15
15
3,5
113
-30
184
12
>2500
HLP
Telex E

22
22
22 4,4
107
-27
202
12
>2500
HLP
32
32
32 5,4
104
-24
218
12
>2500
HLP
46 46 46 6,7 98
-24
230
12
>2500
HLP
68 68 68 8,6 98
-24
240
12
>2500
HLP
-21
250
12
>2500
HLP
100
100
100
32
32
32 6,3
150
-30
218
12
>2500
HVLP
Telex HVLP
46 46 46 8,1
150
-30
230
12
>2500
HVLP
68 68 68
11,2 97
10,9
150
-30
240
12
>2500
HVLP
32 5,4
102
-14
218
10
>1500
HLP
46 46 46 6,7 98
Hidrulico SC
-30
230
10
>1500
HLP
68 68 68 8,6 99
-27
240
10
>1500
HLP
32
32 6,3
150
-33
218
10
>1500
HVLP
46 46 46 8,1
Hidrleo
68 68 68
10,9
150
-33
230
10
>1500
HVLP
150
-30
240
10
>1500
HVLP
14,5
15
-36
250
10
>1500
HVLP
- 43 6,8
115
-24
230
32
32
32 5,5
Hidrulico C-3 EP
46 46 46 7
108
-30
218
109
-30
230
Telex W
32
32
100
-
32
100
100
The characteristics shown are for typical values. There may be variations between the specification limits.
The data shown are in force as of their publication. June 2007.
22
GEAR OILS
VISCOSITIES
ISO
GRADE
cSt (40 C)
100
100
cSt (100 C)
Point of
Viscosity Rate
11,3 99
Pour Point (C)
-9
Flash Point (C)
Min FZG
Scale
DIN 51517/
ISO 6743/6
195
12
CLP/CKC
100
150
150
150
14,6 96
-9
200
12
CLP/CKC

Tauro

220
220
220
30,5 95
-9
205
12
CLP/CKC
320
320
320
24 95
-9
210
12
CLP/CKC
460 460 460
30 95
-9
215
12
CLP/CKC
680 680 680
39 95
-9
215
12
CLP/CKC
68 68 68 8,8 98
-9
190
12
CLP/CKD
100
100
100
11,3 99
-9
195
12
CLP/CKD
150
150
150
14,6 96
-9
200
12
CLP/CKD

Sper Tauro

220
220
220
30,5 95
-9
205
12
CLP/CKD
320
320
320
24 95
-9
210
12
CLP/CKD
460 460 460
30 95
-9
215
12
CLP/CKD
680 680 680
39 95
-9
215
12
CLP/CKD

Sper Tauro

Sinttico

1000
1000
1000 50
100
-6
230
12
CLP/CKD
100
100
100
150
-54
205
12
CLP/CKS
14,5
150
150
150
21
153
-51
205
12
CLP/CKS
220
220
220
26,7
156
-42
205
12
CLP/CKS
320
320
320
35,5
460 460 460 46

158
-42
210
12
CLP/CKS
160
-39
215
12
CLP/CKS
150
150
150
25,31
202
-39
260
12
CLP/CKS
220
220
220
32,51
193
-33
294
12
CLP/CKS

320
320
320 43,93
Sper Tauro PAG
460 460 460 67,67
196
-36
296
12
CLP/CKS
225
-36
286
12
CLP/CKS
680 680 725
122
272
-30
287
12
CLP/CKS
165
284
-27
296
12
CLP/CKS
100 81,0 9,6 95
-25
190
12
220
1000
1000
1000
Aprox.

Zeus EP GL-5

SAE 80W
205,0
18,0 95
-18
200
12
SAE 140 460 423,0
29,0 95
-18
205
12
SAE 90
23
ISO
GRADE
TURBINES AND
COMPRESSORS
VISCOSITIES
cSt (40 C) cSt (100 C)
Point of
Viscosity
Rate
7 7 6,4
2,1 95
Pour Point (C) Flash Point (C)
-9
Time for
neutralization
N 2 (h)
Quality
Level
128
15
15
13,8
3,2 95
-9
170
>2000
DIN 51524 HL
22
22
24,2 4,5 95
-9
180
>2000
DIN 51524 HL
32
32
32 5,3 95
-9
190
>2000
DIN 51515 L-TD
46 46 46 6,7 95
-9
200
>2000
DIN 51515 L-TD
68 68 68 8,5 95
Aries
-9
215
>2000
DIN 51515 L-TD
-9
230
>2000
DIN 51515 L-TD
100
100
100
11 95
125
123
12,7 95
-9
235
>2000
150
150
150
14,6 95
-9
235
>2000
DIN 51506 VCL
220
220
220
30,5 95
-9
240
>2000
DIN 51517 CL
380
380
26,7 95
-9
265
>2000
DIN 51517 CL
32
32
32 5,3 95
-9
190
>3000
DIN 51515 L-TG
46 46 46 6,7 95
Turbo Aries
-9
200
>3000
DIN 51515 L-TG
68 68 68 8,5 95
-9
215
>2500
DIN 51515 L-TD
Turbo Aries EP
- 80 9,5 95
-9
220
>1000

32
32
32 5,3 95
Aries Turbo Gas
46 46 46 6,7 95
-15
190
>3000
DIN 51515 L-TGP
-15
200
>3000
DIN 51515 L-TGP

32
32
32 5,3
Aries Turbo Gas CC
46 46 46 6,7
120
-15
220
>7000
DIN 51515 L-TGP
120
-15
230
>7000
DIN 51515 L-TGP
EP
Aeroemulsin
50 C min
Self-igniting
Temperature (C)
Comander EHC
46 46 43,4
-20
250 575
<2
Rust with Fe2 O3

Conradson
Carbon (%)
32
32
32 5,3
100
-12
190
Losses of
Evaporation (%)
0,94 9,11
DIN 51506 VDL
Merak VDL
46 46 46 6,7 98
-12
210
1,2 5
DIN 51506 VDL
68 68 68 8,5 97
-12
210
2,73 4,28
DIN 51506 VDL
-12
225
100
Sinttico Thor
100
100
ISO
GRADE
REFRIGERATION
OILS

100
32
32
100
100
11 96
13
125
-21
Self-igniting
temperature (C)
4 ball welding
loads (Kg)
250 425
130
cSt (0 C)
cSt (-15 C)
Freezing Point (C)
Fog
2700
-41
It does not appear
Polar
46 46 46 900 5700
-39
It does not appear
68 68 68
-33
It does not appear
ISO
GRADE
32 500
DIN 51506 VDL
Point of
VISCOSITIES
cSt (40 C)
DIN 51506 VDL
1700
12000
VISCOSITIES
Pour Point (C)
Flash Point (C)
32 5,6
114
-9
180
200
68 68 68 9
Zeus Gua

150
150
150
15,2
106
-9
190
200
101
-9
200
250
19,2 98
-9
210
250
Flash Point (C)
Thermal stability
C
32
220
HEAT
TRANSFER OILS
32
220
ISO
GRADE
220
cSt (100 C)
4 ball welding
loads (kg)
cSt (-15 C)
SLIDEWAYS OIL
cSt (40 C)
Point of
VISCOSITIES
cSt (40 C)
Point of
cSt (100 C)
cSt (-15 C)
Pour Point (C)
Multigrado Trmico
37 5,8 96
-15
200
300
Heliotermo 2550
37 5,8 95
-15
190
280
24
VISCOSITIES
GENERAL
PURPOSE OILS
Point of
ISO
GRADE
cSt (40 C)
SAE 30
100
100
11 95
-15
210
SAE 40
150
150
14,5 95
-10
220
15
15
15
3,4 95
-24
170
V
46 46 46 6,7 95
-21
200
68 68 68 8,5 95
-21
210

Multiuso Extra

cSt (100 C)
Viscosity Rate
Pour Point (C)
Flash Point (C)
100
100
100
11 95
-21
220
130
128
13,1 95
-18
225
150
150
150
14,5 95
-15
230
ROLLING OILS

Point of
VISCOSITIES
ISO
GRADE
cSt (40 C)
cSt (100 C)
Viscosity Rate
Pour Point (C)
Flash Point (C)
Min FZG
Scale
Time for
neutralization
N 2 (h)
ISO 6743/2
220
220
220
30,5 95
-9
240
>1000
FC
320
320
320
24 95
-9
240
>1000
FC
Circulacin
390
390
27 95
-9
240
>1000
FC
460 460 460
30 95
-9
260
>1000
FC
680 680 680
39 95
-9
260
>1000
FC
100 90
10,3 95
-9
224
12
>1000
FD
220
220
220
30,5 95
-9
228
12
>1000
FD
320
320
320
24 95
-9
234
12
>1000
FD
39 95
-9
260
12
>1000
FD
100
Circulacin EP

680 680 680

ISO
GRADE
PNEUMATIC
TOOLS
Point of
VISCOSITIES
cSt (40 C) cSt (100 C)
Viscosity
Rate
Electra 3
200
0,42
0-0-80
220
0,36
0-0-80
-21
-15
Point of
VISCOSITIES
cSt (40 C)
Emulsion
30 min
Flash Point (C)
46 46 46 6,8
100
Astra

100
100
100 8 97
ELECTRICAL
OILS
4 diameter welding
marker balls at 40 kg
Pour Point (C)
cSt (-30 C)
Pour Point (C)
Flash Point (C)
Rigidity
(kV)
Loss factor
at 90 C
10,5 680
-42
168 70
0,00056
Tensin Centauro 9,6 936
-51
150 70
0,00048
STEAM OILS
ISO
GRADE
Point Of
VISCOSITIES
Pour Point (C)
Flash Point (C)
30,5 95
-9
240
Helen

200 680 680 40 95
-9
240
240
-9
240
cSt (40 C)
140 460 460

1000
cSt (100 C)
Viscosity Rate
1000 50 95
25
TRADE PRESENTATIONS

ISO
HYDRAULIC OILS GRADE
5 L
18 Kg 25 L* 40 Kg* 45 Kg* 160 Kg 180 Kg 185 Kg 200 Kg 205 Kg 830 Kg 875 Kg

68

32

n
46
n

n
n
Telex
68
n n n

100

22

32

46

n
Hydroflux EP
68

n

100

150

5

32
Hydroflux
46
HL

n
n
n
10
15

Telex E

22
32
46
68

100

32
Telex
46
HVLP
68

n
n

n
n
n

n
n
n

n
n
n
32
Hidrulico
46
SC

68

100

SAE 10W/20

n
32
46
Hidrleo
68

Telex W

32
Hidrulico C3-EP
46
GEAR OILS
ISO

220
Tauro

320
460
5 L
n
n
n
n
n
n
n
n
n
n
n
n
n

n
n
n
n
n
n
n

n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n

n
n

n
100
150
n
n
n
n
n
680
n
68
n

100

n

150
n

220
n
Sper Tauro

320
n
460
n
680
n

1000
n

n
n
n

* The 25 L, 40 and 45 Kg presentations are soon to be replaced by the 18 Kg format.
26

Bulk
n
n
n
n
n
n
n
n
n
Bulk
n

n

n
n
n
n
n
n
n
n
n
n
TRADE PRESENTATIONS
ISO
GRADE
GEAR OILS
5 L
18 Kg 25 L* 40 Kg* 45 Kg* 160 Kg
100
150

Sper
Tauro Sinttico
220
320
460

220
320
Sper Tauro PAG
150
460
680

1000

n

n

n n
n
n

180 Kg 185 Kg 200 Kg 205 Kg 830 Kg 875 Kg
SAE 80W
Zeus

EP GL-5
SAE 90
SAE 140
TURBINES AND
COMPRESSORS
ISO
5 L

n
n

n

n
n
n
n
n
18 Kg 25 L* 40 Kg* 45 Kg* 160 Kg 180 Kg 185 Kg 200 Kg 205 Kg 830 Kg

n
n
n
15

Bulk
875 Kg
Bulk
n
n
n
n
n
46
n
n n
Aries
68
n n
n n

100

n n n

125
n

150
n
n
n

220
n n n

380
n

32
n
n n n
Turbo
Aries
46

n
n n
68

n
n n

32

n

n n
Aries Turbo Gas
46

n
n n

32

n

n

n
Aries Turbo Gas CC
46
n

n
n
Comander EHC 46
n

32
n
46
n
Merak VDL
68
n

100
n
Sinttico Thor
100
n

22
32
REFRIGERATION
OILS

ISO
5 L
32
Polar
46
68
SLIDEWAYS OILS

ISO
5 L
32
n
n
68
Zeus Gua

150

n
n
n
220
27
n
n
n
n
875 Kg
Bulk
n
875 Kg
Bulk
TRADE PRESENTATIONS
HEAT
TRANSFER OILS
Multigrado Trmico
Heliotermo 2550

GENERAL
PURPOSE
OILS

5 L
GRADO
ISO

5 L
n
n
ROLLING OILS
n
n

n
n

SAE 30
SAE 40
ISO

Circulacin

390
460
680

100

220
Circulacin
EP

320

220
320
460
680
PNEUMATIC

TOOLS
ISO
5 L
18 Kg 25 L* 40 Kg* 45 Kg* 160 Kg
ISO
Electra 3
Tensin Centauro
STEAM
OILS
ISO

5 L
140 460
200 680
240
QUENCHING
OILS
5 L

5 L
n
n
n
n
n
n
n
n

5 L
Ibertem 24
Ibertem 34
Ibertem 44 H
Ibertem 99 F
Ibercut EDM 2
Ibercut 12 AM
Ibercut 20 C
Ibercut 30 A
Ibercut A

n
n
n
n
n
n
n
n
n
n

n

n
n
n

n
n

n
28
n
n
n
n
n
n
n
n
n
Bulk

n
n
n
Bulk
n
n
Bulk
n
Bulk

n

n

n

n
n

n
Bulk
n
n
5 L
Bulk
n n
n n

n
Ibertem 15 R
Ibertem 15
CUTTING
OILS
n
n

1000

Helen

180 Kg 185 Kg 200 Kg 205 Kg 830 Kg 875 Kg
46
Astra

100

ELECTRICAL
OILS
Bulk
n
n

15
n
V 46
n
68
n

100
n
W

130
n

150
n

Multiuso Extra

875 Kg
n
n
n

Bulk
n
n
n
n
Glorieta Mar Caribe, 1. 28043 Madrid

repsolypf.com
Customer Service: 901 111 999
June 2007
Repsol YPF Lubricants and Specialities, S.A.

Repsol Industrial Catalogue

Uploaded by

Copyright:

Available Formats

Repsol Industrial Catalogue

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Repsol Industrial Catalogue

Uploaded by

Copyright:

Available Formats

LUBRICANTS

We present you our Lubricants Catalogue for Industry.

LUBRICANTS FOR INDUSTRY

4REPSOL HIDROFLUX HL ....................................................................................................................................

4REPSOL TAURO . ................................................................................................................................................. 8

4REPSOL ARIES ...................................................................................................................................................... 11

4REPSOL POLAR ................................................................................................................................................... 14

4REPSOL ZEUS GUA ............................................................................................................................................ 14

4REPSOL MULTIGRADO TRMICO ................................................................................................................... 14

4REPSOL MULTIUSO EXTRA ............................................................................................................................... 15

4REPSOL CIRCULACIN . .................................................................................................................................... 16

4REPSOL ASTRA .................................................................................................................................................... 17

4REPSOL ELECTRA 3 . ........................................................................................................................................... 17

4REPSOL HELEN .................................................................................................................................................... 18

4REPSOL IBERTEM 15 .......................................................................................................................................... 19

4REPSOL IBERCUT EDM 2 ................................................................................................................................... 20

LUBRICANTS FOR INDUSTRY

Mineral, highly refined paraffin oils. Their specially selected

=RESISTANCE TO AGEING AND FORMING SLUDG

iSO GRADES: 32, 46 and 68.

Oils designed for hydraulic circuits requiring lubricants with

=LOW FREEZING POINT

They are specially indicated for hydraulic circuits of general use,

=HIGH AIR REMOVAL CAPACITY

ISO GRADES: 32, 46, 68 and 100.

The lubricants included in this range are manufactured with

=RESISTANCE TO OXIDATION, AGEAING AND

Oils highly appropriate for the majority of hydraulic circuits,

=HIGH VISCOSITY INDEX

=LOW FREEZING POINT

ISO GRADES: 22, 32, 46, 68, 100 and 150.

DIN 51524 - HLP

Customer service: +34 901 111 999

Oils specially designed for use in hydraulic circuits requiring

=HIGH RESISTANCE TO OXIDATION AND SLUDGE

Specially indicated for hydraulic circuits and public works

=HIGH AIR RELEASED CAPACITY

ISO GRADES: 5, 10, 15, 22, 32, 46, 68 and 100.

=COMPATIBILITY WITH JOINTS AND GRIPS

QUALITY LEVEL: ISO 11158 - HM

=EXCELLENT LOAD CAPACITY

DIN 51524 - HLP

=HIGH THERMAL AND HYDROLITHIC STABILITY

REPSOL TELEX HVLP

Special oils for hydraulic circuits subject to changes of

=HIGH RESISTANCE TO OXIDATION, AGEING AND

Excellent performance in hydraulic systems for all types of public

=EXCELLENT WATER SEPARATION

ISO GRADES: 32, 46 and 68.

=EXCELLENT METAL PROTECTION AGAINST

QUALITY LEVEL: ISO 11158 - HV

=COMPATIBILITY WITH THE JOINTS NORMALLY

DIN 51524 - HVLP

=HIGH CAPACITY TO WITHSTAND LOAD

Customer service: +34 901 111 999

LUBRICANTS FOR INDUSTRY

Top quality oils for hydraulic circuits.

=HIGH RESISTANCE TO AGEING AND TO SLUDGE

Manufactured from paraffin bases with ashless technology.

=RESISTANCE TO AGEING AND FORMING SLUDG

=RESISTANCE TO OXIDATION, AGEAING AND

=HIGH RESISTANCE TO OXIDATION AND SLUDGE

=HIGH AIR RELEASED CAPACITY

=COMPATIBILITY WITH JOINTS AND GRIPS

=HIGH THERMAL AND HYDROLITHIC STABILITY

=HIGH RESISTANCE TO OXIDATION, AGEING AND

=EXCELLENT WATER SEPARATION

=EXCELLENT METAL PROTECTION AGAINST

=COMPATIBILITY WITH THE JOINTS NORMALLY

=HIGH CAPACITY TO WITHSTAND LOAD

=HIGH RESISTANCE TO AGEING AND TO SLUDGE

=EXCELLENT ANTI-FOAM PROPERTIES

=COMPATIBLE WITH JOINTS AND ELASTOMERS

=EXCELLENT ANTI-WEAR PROPERTIES

=RESISTANCE TO FOAM FORMING AND EXTREMELY

=VERY GOOD PERFORMANCE IN JOINTS AND

=HIGH RESISTANCE TO BREAKAGE OF THE

=REDUCE VIBRATIONS, KNOCKS OR NOISE

=REDUCE WEAR IN EXTREME LUBRICATION

=GOOD ANTI-FOAM CHARACTERISTICS

=NON-CORROSSIVE AGAINST STEEL OR ITS ALLOYS

=STABILITY AGAINST FOAM FORMING

=EXCEPTIONAL RESISTANCE TO RUST AT HIGH

=EXCELLENT WATER SEPARATION AND ANTI-FOAM

QUALITY LEVEL:ISO 6743/6 - CKT

=VERY GOOD PROTECTION AGAINST IRON RUST

=EXCEPTIONAL RESISTANCE TO RUST AT HIGH

=MINIMUM FORMATON OF DEPOSITS

QUALITY LEVEL: ISO 6743/6 - CKT

=HIGH RESISTANCE TO AGEING AND SLUDGE

=EXCELLENT ANTI-FOAM PROPERTIES AND AIR

=EXTRAORDINARY RESISTANCE TO AGEING AND