Scribd Logo
Upload

Welcome to Scribd!

  • 60 views

    ATS22C41Q: Product Data Sheet

    Uploaded by

    Dheeraj Yadav
    This product data sheet provides specifications for the ATS22C41Q soft starter for asynchronous motors. 1) The soft starter has a power range of 110kW at 230V and 220kW at 400-440V for 3-phase applications. 2) It has a factory setting current of 388A, power dissipation of 177W, IP00 degree of protection, and starts motors with torque control limiting current to 3.5 times the nominal current. 3) Connections include power supply and motor terminals that support cables up to 250mm2, control circuit connections, discrete I/O, and Modbus communication over RS485.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ATS22C41Q: Product Data Sheet

    Uploaded by

    Dheeraj Yadav
    60 views9 pages
    This product data sheet provides specifications for the ATS22C41Q soft starter for asynchronous motors. 1) The soft starter has a power range of 110kW at 230V and 220kW at 400-440V for 3-phase applications. 2) It has a factory setting current of 388A, power dissipation of 177W, IP00 degree of protection, and starts motors with torque control limiting current to 3.5 times the nominal current. 3) Connections include power supply and motor terminals that support cables up to 250mm2, control circuit connections, discrete I/O, and Modbus communication over RS485.

    Original Description:

    manual

    Original Title

    Altistart_22_ATS22C41Q

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This product data sheet provides specifications for the ATS22C41Q soft starter for asynchronous motors. 1) The soft starter has a power range of 110kW at 230V and 220kW at 400-440V for 3-phase applications. 2) It has a factory setting current of 388A, power dissipation of 177W, IP00 degree of protection, and starts motors with torque control limiting current to 3.5 times the nominal current. 3) Connections include power supply and motor terminals that support cables up to 250mm2, control circuit connections, discrete I/O, and Modbus communication over RS485.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    60 views9 pages

    ATS22C41Q: Product Data Sheet

    Uploaded by

    Dheeraj Yadav
    This product data sheet provides specifications for the ATS22C41Q soft starter for asynchronous motors. 1) The soft starter has a power range of 110kW at 230V and 220kW at 400-440V for 3-phase applications. 2) It has a factory setting current of 388A, power dissipation of 177W, IP00 degree of protection, and starts motors with torque control limiting current to 3.5 times the nominal current. 3) Connections include power supply and motor terminals that support cables up to 250mm2, control circuit connections, discrete I/O, and Modbus communication over RS485.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    Product data sheet

    Characteristics

    ATS22C41Q

    soft starter-ATS22-control 220V-power


    230V(110kW)/400...440V(220kW)

    Range of product

    Altistart 22

    Product or component
    type

    Soft starter

    Product destination

    Asynchronous motors

    Product specific application

    Severe and standard applications

    Component name

    ATS22

    Network number of
    phases

    3 phases

    Power supply voltage

    230...440 V (- 15...10 %)

    Motor power kW

    220 kW at 440 V
    220 kW at 400 V
    110 kW at 230 V

    Factory setting current

    388 A

    Power dissipation in W

    177 W for standard applications

    Utilisation category

    AC-53A

    Type of start

    Start with torque control (current limited to 3.5 In)

    Icl nominal current

    410 A (connection in the motor supply line) for standard applications

    IP degree of protection

    IP00

    Complementary
    Assembly style

    With heat sink

    Function available

    Internal bypass

    Power supply voltage limits

    195...484 V

    Power supply frequency

    50...60 Hz (- 10...10 %)

    Network frequency

    45...66 Hz

    Device connection

    In the motor supply line


    To the motor delta terminals

    Control circuit voltage

    220...230 V -15...10 % at 50/60 Hz

    Control circuit consumption

    20 W

    Discrete output number

    Discrete output type

    (R2)Relay outputs 230 V running, alarm, trip, stopped, not stopped, starting,
    ready, C/O
    (R1)Relay outputs 230 V running, alarm, trip, stopped, not stopped, starting,
    ready, C/O

    Minimum switching current

    Relay outputs 100 mA at 12 V, DC

    Maximum switching current

    Relay outputs 2 A at 30 V, DC inductive load, L/R = 7 ms


    Relay outputs 2 A at 250 V, AC inductive load, cos phi = 0.4, L/R = 20 ms
    Relay outputs 5 A at 30 V, DC resistive load, cos phi = 1
    Relay outputs 5 A at 250 V, AC resistive load, cos phi = 1

    Discrete input number

    Discrete input type

    (LI1, LI2, LI3)logic 5 mA 4.3 kOhm

    Discrete input voltage

    24 V (<= 30 V)

    Discrete input logic

    (LI1, LI2, LI3)positive logic state 0 < 5 V and < 2 mA state 1 > 11 V and > 5 mA

    Output current

    0.4...1 Icl adjustable

    PTC probe input

    750 Ohm

    Communication port protocol

    Modbus

    Connector type

    1 RJ45

    Communication data link

    Serial

    Physical interface

    RS485 multidrop

    Jan 23, 2015

    The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
    This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
    It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
    Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

    Main

    Transmission rate

    4800, 9600 or 19200 bps

    Max nodes number

    31

    Protection type

    Thermal protection on starter


    Thermal protection on motor
    Phase failure on line

    Marking

    CE

    Type of cooling

    Forced convection

    Operating position

    Vertical +/- 10 degree

    Height

    425 mm

    Width

    206 mm

    Depth

    299 mm

    Product weight

    33 kg

    Environment
    Electromagnetic compatibility

    Voltage/Current impulse conforming to IEC 61000-4-5 level 3


    Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3
    level 3
    Immunity to electrical transients conforming to IEC 61000-4-4 level 4
    Electrostatic discharge conforming to IEC 61000-4-2 level 3
    Damped oscillating waves conforming to IEC 61000-4-12 level 3
    Conducted and radiated emissions conforming to IEC 60947-4-2 level A

    Standards

    EN/IEC 60947-4-2

    Product certifications

    CCC
    CSA
    C-Tick
    GOST
    UL

    Vibration resistance

    1.5 mm (f = 2...13 Hz) conforming to EN/IEC 60068-2-6


    1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6

    Shock resistance

    15 gn for 11 ms conforming to EN/IEC 60068-2-27

    Noise level

    56 dB

    Pollution degree

    Level 2 conforming to IEC 60664-1

    Relative humidity

    <= 95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

    Ambient air temperature for operation

    > 40...< 60 C with current derating 2.2 % per C


    -10...40 C without derating

    Ambient air temperature for storage

    -25...70 C

    Operating altitude

    > 1000...< 2000 m with current derating of 2.2 % per additional 100 m
    <= 1000 m without derating

    Offer Sustainability
    Sustainable offer status
    RoHS

    Not Green Premium product


    Compliant - since 0939 -

    Schneider Electric declaration of conformity

    Product environmental profile

    Available

    Download Product Environmental

    Product end of life instructions

    Available

    Download End Of Life Manual

    Product data sheet


    Dimensions Drawings

    ATS22C41Q

    Frame Size D
    Dimensions

    Product data sheet


    Mounting and Clearance

    ATS22C41Q

    Precautions
    Standards
    The Altistart 22 soft starter is compliant with pollution Degree 2 as defined in NEMA ICS1-1 or IEC 60664-1.
    For environment pollution degree 3, install the Altistart 22 soft starter inside a cabinet type 12 or IP54.
    DANGER
    HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
    ATS22 soft starters are open devices and must be mounted in a suitable enclosure.
    Failure to follow these instructions will result in death or serious injury.

    Air Circulation
    Leave sufficient free space to help the air required for cooling purposes to circulate from the bottom to the top of the unit.

    Overheating
    To avoid the soft starter to overheat, respect the following recommendations:
    Mount the Altistart 22 Soft Starter within 10 of vertical.
    Do not locate the Altistart 22 Soft Starter near heat radiating elements.
    Electrical current through the Altistart 22 Soft Starter will result in heat losses that must be dissipated into the ambient air immediately
    surrounding the soft starter. To help prevent a thermal fault, provide sufficient enclosure cooling and/or ventilation to limit the ambient
    temperature around the soft starter.
    If several soft starters are installed in a control panel, arrange them in a row. Do not stack soft starters. Heat generated from the
    bottom soft starter can adversely affect the ambient temperature around the top soft starter.

    Wall mounted or Floor-standing Enclosure with IP 23 Degree of protection


    Introduction
    To help proper air circulation in the soft starter, grilles and forced ventilation can be installed.

    Ventilation Grilles

    Forced Ventilation Unit

    ATS22C41Q

    Product data sheet

    Connections and Schema

    Power Terminal
    Bar Style

    Power supply and output to motor

    Bar

    5 mm (0.2 in)

    Bolt

    M12 (0.47 in)

    Cable and protective cover

    Size

    Gauge

    2X250 MCM

    Protective cover

    LA9F703

    Tightening torque

    57 N.m

    2X150 mm

    498.75 lb.in

    Power connections, minimum required wiring section


    IEC cable

    UL cable

    mm (Cu 70C/158F) (1)

    AWG (Cu 75C/167F) (1)

    2 X 150

    2 X 250 MCM

    230 Vac control, logic Inputs (LI) 24 Vdc, 3-wire control


    With Line Contactor, Freewheel or Controlled Stop

    230 Vac control, logic Inputs (LI) 24 Vdc, 2-wire control,freewheel stop
    6

    30 mm (1.18 in)

    Connection in the motor delta winding in series with each winding


    Wiring
    ATS22 soft starters connected to motors with the delta connections can be inserted in series in the motor windings.
    The following wiring requieres particular attention. It is documented in the Altistart 22 Soft start - soft stop unit user manual. Please contact
    Schneider Electric commercial organisation for further informations.

    Example
    A 400 V - 110 kW motor with a line current of 195 A (nominal current for the delta connection). The current in each winding is equal to
    195/1.5 or 130 A. The rating is determined by selecting the soft starter with a permanent nominal current (ICL) just above this current.

    Product data sheet


    Performance Curves

    ATS22C41Q

    Motor Thermal Protection - Cold Curves


    Curves

    A
    B
    C

    Class 10
    Class 20
    Class 30

    Trip time for a Standard Application (Class 10)


    3.5 ln
    32 s

    Trip time for a Severe Application (Class 20)


    3.5 ln
    63 s

    Trip time for a Severe Application (Class 30)


    3.5 ln
    95 s

    Motor Thermal Protection - Warm Curves


    Curves

    A
    B
    C

    Class 10
    Class 20
    Class 30

    Trip time for a Standard Application (Class 10)


    3.5 ln
    16 s

    Trip time for a Severe Application (Class 20)


    3.5 ln
    32 s

    Trip time for a Severe Application (Class 30)


    3.5 ln
    48 s

    You might also like