Scribd
Upload
148 views4 pages

85 Microcontroller Based Vehicles Speed Display For Highways

This document describes a microcontroller-based vehicle speed display system for highways. It uses infrared sensors placed at a fixed distance to detect vehicles and measure their speed. When the first sensor detects a vehicle, a timer starts. When the second sensor detects the vehicle, the timer stops, allowing the microcontroller to calculate speed based on the distance and time. The speed is then displayed on an LCD screen. The goal of the project is to control high-speed vehicles on highways and monitor their speeds.

Uploaded by

செங்கை மஜீத் இராவுத்தர்
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
148 views4 pages

85 Microcontroller Based Vehicles Speed Display For Highways

This document describes a microcontroller-based vehicle speed display system for highways. It uses infrared sensors placed at a fixed distance to detect vehicles and measure their speed. When the first sensor detects a vehicle, a timer starts. When the second sensor detects the vehicle, the timer stops, allowing the microcontroller to calculate speed based on the distance and time. The speed is then displayed on an LCD screen. The goal of the project is to control high-speed vehicles on highways and monitor their speeds.

Uploaded by

செங்கை மஜீத் இராவுத்தர்
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

MICROCONTROLLER BASED VEHICLES SPEED

DISPLAY FOR HIGHWAYS

Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail: [email protected] , Ph: 9885112363 /
040 44433434

AIM:
The aim of the project is to design a system to check the speed of the vehicles on
highways.

PURPOSE:
The purpose of the project is to implement system to control the high speed vehicles
in highways.

BLOCK DIAGRAM:-

LCD
POWER
SUPPLY

MICRO
CONTROLLER

IR-Rx 2

IR-Rx 1

IR-TX 2

IR-TX 1

POWER SUPPLY:

Step Down
Transformer

Bridge
Rectifier

Filter
Circuit

Regulator
section

Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail: [email protected] , Ph: 9885112363 /
040 44433434

DESCRIPTION:
A system designed to record and report on discrete activities within a process is called
as Tracking System. In the same procedure we have developed a methodology of vehicle
speed & direction system for robotics to control and achieve accurate direction speed for
a class of non-linear systems in the presence of disturbances and parameter variations by
using wireless communication technique.
In this methodology we are using a micro controller, resulting in the state trajectory
'sliding' along path-varying slides on the surface. This idealized control law achieves
perfect direction & speed however. The method is applied to the control of a two-link
manipulator handling variable loads in a flexible manufacturing system environment.
In our project we use IR sensors to detect the presence of a vehicle. According to this
project, 2 IR sensors are placed apart with a fixed known distance. Whenever IR rays are
interrupted by a vehicle during first sensor the count up timer is started. When the other
IR sensor senses the presence of vehicle, the count up timer is stopped. As the distance
and time the IR receiver receives the IR signals is noted by microcontroller and from that
we need to calculate speed. Here speed is calculated from the well known formula of
speed which is distance/time.
In this circuit we are using LCD display for indicating the speed. It is easy to set up
and supports the required hardware. To design a vehicle that supports the newest
technology available will be more expensive than boards that are already close to
obsolete.

HARDWARE COMPONENTS:

Micro controller

Power supply

Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail: [email protected] , Ph: 9885112363 /
040 44433434

LCD

IR Transmitter

IF Receiver

SOFTWARE TOOLS:

Keil u-Vision

Embedded C

Express PCB

ISP

APPLICATIONS:
1. Used in Industrial applications.
2. Used in General applications.

RESULT:
With this project we can design a system to control the high speed vehicles on
highways.

Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail: [email protected] , Ph: 9885112363 /
040 44433434

You might also like