Ap Chemistry Course and Exam Description PDF

AP CHEMISTRY
Course and Exam Description
Revised edition
Effective Fall 2014
AP CHEMISTRY
Course and Exam Description

Revised Edition
Effective Fall 2014
The College Board

New York, NY
About the College Board

The College Board is a mission-driven not-for-profit organization that connects students
to college success and opportunity. Founded in 1900, the College Board was created to
expand access to higher education. Today, the membership association is made up of
over 6,000 of the worlds leading educational institutions and is dedicated to promoting
excellence and equity in education. Each year, the College Board helps more than seven
million students prepare for a successful transition to college through programs and
services in college readiness and college success including the SAT and the Advanced
Placement Program. The organization also serves the education community through
research and advocacy on behalf of students, educators and schools.
For further information, visit www.collegeboard.org.
AP Equity and Access Policy

The College Board strongly encourages educators to make equitable access a guiding
principle for their AP programs by giving all willing and academically prepared students
the opportunity to participate in AP. We encourage the elimination of barriers that
restrict access to AP for students from ethnic, racial and socioeconomic groups that have
been traditionally underserved. Schools should make every effort to ensure their AP
classes reflect the diversity of their student population. The College Board also believes
that all students should have access to academically challenging course work before
they enroll in AP classes, which can prepare them for AP success. It is only through a
commitment to equitable preparation and access that true equity and excellence can be
achieved.
This edition includes updated exam information and minor revisions to Appendix A.
See About This Edition on page v for details.
Third reprint. 2014 The College Board. College Board, Advanced Placement Program, AP, AP Central and the acorn logo are
registered trademarks of the College Board. All other products and services may be trademarks of their respective owners. Visit the
College Board on the Web: www.collegeboard.org.
ii
Contents
About This Edition......................................................................................................... v
About AP......................................................................................................................... 1
About the AP Chemistry Course and Exam........................................................................... 2
How AP Courses and Exams Are Developed........................................................................ 2
How AP Exams Are Scored........................................................................................................ 3
Using and Interpreting AP Scores............................................................................................ 4
Additional Resources................................................................................................................... 4
AP Chemistry Curriculum Framework................................................................... 5

Introduction..................................................................................................................................... 5
The Emphasis on Science Practices................................................................................. 5
Overview of the Concept Outline..................................................................................... 6
The Concept Outline......................................................................................................... 8
Big Idea 1: The chemical elements are fundamental building materials of
matter, and all matter can be understood in terms of arrangements of
atoms. These atoms retain their identity in chemical reactions........................... 8
Big Idea 2: Chemical and physical properties of materials can be explained
by the structure and the arrangement of atoms, ions, or molecules and
the forces between them. ...................................................................................... 19
Big Idea 3: Changes in matter involve the rearrangement and/or reorganization
of atoms and/or the transfer of electrons..............................................................38
Big Idea 4: Rates of chemical reactions are determined by details of the
molecular collisions. ...............................................................................................46
Big Idea 5: The laws of thermodynamics describe the essential role of energy
and explain and predict the direction of changes in matter................................53
Big Idea 6: Any bond or intermolecular attraction that can be formed can be
broken. These two processes are in a dynamic competition, sensitive to
initial conditions and external perturbations. .....................................................68
Science Practices for AP Chemistry.......................................................................................82

References.....................................................................................................................................87
Appendix: AP Chemistry Concepts at a Glance...........................................................88
The Laboratory Investigations .............................................................................. 107

Inquiry Instruction in the AP Science Classroom.............................................................107
Time and Resources.................................................................................................................108
Recommended Experiments..................................................................................................109
2014 The College Board.
iii
Participating in the AP Course Audit................................................................... 111

Curricular Requirements ........................................................................................................ 111
Resource Requirements.......................................................................................................... 112
Exam Information...................................................................................................... 113

How the Curriculum Framework Is Assessed.................................................................... 116
Sample Multiple-Choice Questions...................................................................................... 117
Answers to Multiple-Choice Questions................................................................ 135
Sample Free-Response Questions.......................................................................................136
Scoring Guidelines ............................................................................................. 142
Appendix A: Preparing Students for Success in AP Chemistry .................. 150

Appendix B: AP Chemistry Equations and Constants.................................... 161
Appendix C: How to Set Up a Lab Program........................................................163
iv
About This Edition
About This Edition

This edition of the AP Chemistry Course and Exam Description includes the following
changes, which take effect in fall 2014:
The Exam Information section has been edited to reflect the addition of
15minutes to the free-response section of the exam. Starting with the May 2015
exam administration, the exam will be 3 hours and 15 minutes long and include
both a 90-minute multiple-choice section and a 105-minute free-response section.
The descriptions of desired performance in Appendix A have been minimally
revised for clarity and ease of use.
This edition also reflects changes to the curriculum framework that were made in previous
editions, as described in Table 1 and Table 2 below.
Table 1. Spring 2014 Revisions
Fall 2013 Curriculum Framework
Essential Knowledge
2.D.2.b
Spring 2014 revisions
1. Substitutional alloys form between

1. Substitutional alloys form between
atoms of comparable radius, where one
atoms of comparable radius, where one
atom substitutes for the other in the
atom substitutes for the other in the
lattice. (Brass is an example in which
lattice. (Brass is an example in which
some copper atoms are substituted
some copper atoms are substituted
with a different element, usually zinc.)
with a different element, usually zinc.)
The density typically lies between
The density typically lies between
those of the component metals and the
those of the component metals, as with
alloy remains malleable and ductile.
interstitial alloys, substitutional alloys
are less malleable and ductile than pure
2. Alloys typically retain a sea of mobile
metals.
electrons and so remain conducting
2. Alloys typically retain a sea of mobile
3. In some cases, alloy formation alters
electrons and so remain conducting
the chemistry of the surface. An
example is formation of a chemically
3. Often the surface of a metal or alloy is
inert oxide layer in stainless steel.
changed through a chemical reaction.
An example is formation of a chemically
inert oxide layer in stainless steel,
through reaction with oxygen in the air.
Essential Knowledge 2.D.3 Covalent network solids generally have

extremely high melting points and are hard
and are thermal insulators. Some conduct
electricity.
Covalent network solids have properties

that reflect their underlying 2-D or 3-D
networks of covalent bonds. Covalent
network solids generally have extremely
high melting points and are hard.
Return to the Table of Contents

AP Chemistry Course and Exam Description
Table 2. Spring 2013 Revisions

Exclusion Statements
Original Curriculum Framework
Spring 2013 revisions
No rationale provided for exclusions.
A rationale for each exclusion statement

has been provided.
Essential Knowledge 2.B.2 Dipole forces result from the attraction

among the positive ends and negative
ends of polar molecules. Hydrogen
bonding is a strong type of dipoledipole force.
Dipole forces result from the attraction

among the positive ends and negative
ends of polar molecules. Hydrogen
bonding is a strong type of dipoledipole force that exists when very
electronegative atoms (N, O, and F) are
involved.
Essential Knowledge
2.B.2.b
Hydrogen bonding is a relatively strong

type of intermolecular interaction that
occurs when hydrogen atoms that
are covalently bonded to the highly
also attracted to the negative end of a
dipole formed by the electronegative atom
(N, O, and F) in a different molecule, or a
different part of the same molecule. When
hydrogen bonding is present, even small
molecules may have strong intermolecular
attractions.
Hydrogen bonding is a relatively strong

type of intermolecular interaction
that exists when hydrogen atoms that
are covalently bonded to the highly
also attracted to the negative end of a
dipole formed by the electronegative atom
(N, O, and F) in a different molecule or a
different part of the same molecule. When
hydrogen bonding is present, even small
molecules may have strong intermolecular
attractions.
Essential Knowledge
3.C.3.d
Many real systems do not operate

at standard conditions; the electrical
potential determination must account
for the effect of concentrations. Le
Chateliers principle can be used to predict
qualitatively the differences in electrical
potential and electron flow compared to
those at standard conditions.
Many real systems do not operate at

standard conditions and the electrical
potential determination must account
for the effect of concentrations. The
qualitative effects of concentration on
the cell potential can be understood by
considering the cell potential as a driving
force toward equilibrium, in that the
farther the reaction is from equilibrium,
the greater the magnitude of the cell
potential. The standard cell potential, ,
corresponds to the standard conditions
of
. As the system approaches
equilibrium, the magnitude (i.e., absolute
value) of the cell potential decreases,
reaching zero at equilibrium (when
).
Deviations from standard conditions that
take the cell further from equilibrium than
will increase the magnitude of the
cell potential relative to . Deviations
from standard conditions that take the
cell closer to equilibrium than
will decrease the magnitude of the cell
potential relative to . In concentration
cells, the direction of spontaneous
electron flow can be determined by
considering the direction needed to reach
equilibrium.

vi
About This Edition
Essential Knowledge
3.C.3.e
The magnitude of the standard cell

potential is proportional to
(standard
Gibbs free energy) for the redox reaction
from which it is constructed.
(standard Gibbs free energy) is

proportional to the negative of the cell
potential for the redox reaction from which
it is constructed.
Essential Knowledge 5.B.4 Calorimetry is an experimental technique

that is used to measure the change in
energy of a chemical system.
Calorimetry is an experimental technique

that is used to determine the heat
exchanged/transferred in a chemical
system.
Learning Objective 1.15
SP 6.4 added
SP 6.4 added
SP 6.4 added
SP 6.4 added
SP 6.4 added
SP 6.4 added
SP 6.4 added
SP 6.4 added
SP 6.4 added
SP 6.4 added
SP 6.4 added
SP 6.4 added

vii
Page viii has been intentionally left blank
About AP
About AP
AP enables students to pursue college-level studies while still in high school. Through
more than 30 courses, each culminating in a rigorous exam, AP provides willing and
academically prepared students with the opportunity to earn college credit and/or
advanced placement. Taking AP courses also demonstrates to college admission officers
that students have sought out the most rigorous course work available to them.
Each AP course is modeled upon a comparable college course, and college and university
faculty play a vital role in ensuring that AP courses align with college-level standards.
Talented and dedicated AP teachers help AP students in classrooms around the world
develop and apply the content knowledge and skills they will need later in college.
Each AP course concludes with a college-level assessment developed and scored by
college and university faculty, as well as experienced AP teachers. AP Exams are an
essential part of the AP experience, enabling students to demonstrate their mastery of
college-level course work. Most four-year colleges and universities in the United States
and universities in 60 countries recognize AP in the admission process and grant students
credit, placement or both on the basis of successful AP Exam scores. Visit
www.collegeboard.org/apcreditpolicy to view AP credit and placement policies at more
than 1,000 colleges and universities.
Performing well on an AP Exam means more than just the successful completion of a
course; it is a gateway to success in college. Research consistently shows that students who
score a 3 or higher on AP Exams typically experience greater academic success in college
and have higher graduation rates than their non-AP peers.1 Additional AP studies are
available at www.collegeboard.org/research.
1. See the following research studies for more details:

Linda Hargrove, Donn Godin, and Barbara Dodd, College Outcomes Comparisons by AP and Non-AP High School Experiences
(New York: The College Board, 2008).
Chrys Dougherty, Lynn Mellor, and Shuling Jian, The Relationship Between Advanced Placement and College Graduation
(Austin, Texas: National Center for Educational Accountability, 2006).

About the AP Chemistry Course and Exam

This AP Chemistry Course and Exam Description details the essential information
required to understand the objectives and expectations of an AP course. The AP Program
unequivocally supports the principle that each school develops and implements its
own curriculum that will enable students to develop the content knowledge and skills
described here.
The AP Chemistry course is designed to be taken only after the successful completion of
a first course in high school chemistry. Surveys of students who take the AP Chemistry
Exam indicate that the probability of achieving a score of 3 or higher is significantly
greater for students who successfully complete a first course in high-school chemistry
prior to undertaking the AP course. Thus it is strongly recommended that credit in a firstyear high school chemistry course be a prerequisite for enrollment in an AP Chemistry
class. In addition, the recommended mathematics prerequisite for an AP Chemistry
class is the successful completion of a second-year algebra course. The advanced work
in chemistry should not displace any other part of the students science curriculum. It is
highly desirable that a student have a course in secondary school physics and a four-year
college-preparatory program in mathematics.
Schools wishing to offer AP courses must participate in the AP Course Audit, a process
through which AP teachers syllabi are reviewed by college faculty. The AP Course
Audit was created at the request of College Board members who sought a means for the
College Board to provide teachers and administrators with clear guidelines on curricular
and resource requirements for AP courses and to help colleges and universities validate
courses marked AP on students transcripts. This process ensures that AP teachers
syllabi meet or exceed the curricular and resource expectations that college and secondary
school faculty have established for college-level courses. For more information on the AP
Course Audit, visit www.collegeboard.com/apcourseaudit.
How AP Courses and Exams Are Developed

AP courses and exams are designed by committees of college faculty and expert AP
teachers who ensure that each AP subject reflects and assesses college-level expectations.
To find a list of each subjects current AP Development Committee members, please
visit press.collegeboard.org/ap/committees. AP Development Committees define the
scope and expectations of the course, articulating through a curriculum framework what
students should know and be able to do upon completion of the AP course. Their work
is informed by data collected from a range of colleges and universities to ensure that AP
course work reflects current scholarship and advances in the discipline.
The AP Development Committees are also responsible for drawing clear and wellarticulated connections between the AP course and AP Exam work that includes

2
About AP
designing and approving exam specifications and exam questions. The AP Exam
development process is a multiyear endeavor; all AP Exams undergo extensive review,
revision, piloting, and analysis to ensure that questions are high quality and fair and that
there is an appropriate spread of difficulty across the questions.
Throughout AP course and exam development, the College Board gathers feedback from
various stakeholders in both secondary schools and higher education institutions. This
feedback is carefully considered to ensure that AP courses and exams are able to provide
students with a college-level learning experience and the opportunity to demonstrate
their qualifications for advanced placement upon college entrance.
How AP Exams Are Scored

The exam scoring process, like the course and exam development process, relies on the
expertise of both AP teachers and college faculty. While multiple-choice questions are
scored by machine, the free-response questions are scored by thousands of college faculty
and expert AP teachers at the annual AP Reading. AP Exam Readers are thoroughly
trained, and their work is monitored throughout the Reading for fairness and consistency.
In each subject, a highly respected college faculty member fills the role of Chief Reader,
who, with the help of AP readers in leadership positions, maintains the accuracy of the
scoring standards. Scores on the free-response questions are weighted and combined
with the results of the computer-scored multiple-choice questions, and this raw score is
converted into a composite AP score of 5, 4, 3, 2, or 1.
The score-setting process is both precise and labor intensive, involving numerous
psychometric analyses of the results of a specific AP Exam in a specific year and of the
particular group of students who took that exam. Additionally, to ensure alignment
with college-level standards, part of the score-setting process involves comparing the
performance of AP students with the performance of students enrolled in comparable
courses in colleges throughout the United States. In general, the AP composite score
points are set so that the lowest raw score needed to earn an AP score of 5 is equivalent
to the average score among college students earning grades of A in the college course.
Similarly, AP Exam scores of 4 are equivalent to college grades of , , and B. AP Exam
scores of 3 are equivalent to college grades of , , and C.

Using and Interpreting AP Scores

The extensive work done by college faculty and AP teachers in the development of the
course and the exam and throughout the scoring process ensures that AP Exam scores
accurately represent students achievement in the equivalent college course. While
colleges and universities are responsible for setting their own credit and placement
policies, AP scores signify how qualified students are to receive college credit and
placement:
AP Score
Recommendation
Extremely well qualified
Well qualified
Qualified
Possibly qualified
No recommendation
Additional Resources
Visit apcentral.collegeboard.org for more information about the AP Program.

4
AP Chemistry Curriculum Framework
AP Chemistry Curriculum
Framework
Introduction
Given the speed with which scientific discoveries and research continuously expand
scientific knowledge, many educators are faced with the challenge of balancing breadth of
content coverage with depth of understanding. The AP Chemistry course addresses this
challenge by focusing on a model of instruction which promotes enduring, conceptual
understandings and the content that supports them. This approach enables students to
spend less time on factual recall and more time on inquiry-based learning of essential
concepts, and helps them develop the reasoning skills necessary to engage in the science
practices used throughout their study of AP Chemistry.
To foster this deeper level of learning, the breadth of content coverage in AP Chemistry
is defined in a way that distinguishes content essential to support the enduring
understandings from the many examples or applications that can overburden the course.
Illustrative examples are provided that offer teachers a variety of optional instructional
contexts to help their students achieve deeper understanding. Additionally, content that is
outside the scope of the course and exam is also identified.
Students who take an AP Chemistry course, designed with this curriculum framework as
its foundation, will also develop advanced inquiry and reasoning skills, such as designing
a plan for collecting data, analyzing data, applying mathematical routines, and connecting
concepts in and across domains. The result will be readiness for the study of advanced
topics in subsequent college courses a goal of every AP course.
The AP Chemistry course is designed to be the equivalent of the general chemistry
course usually taken during the first college year. For some students, this course enables
them to undertake, in their first year, second-year work in the chemistry sequence at
their institution or to register in courses in other fields where general chemistry is a
prerequisite. For other students, the AP Chemistry course fulfills the laboratory science
requirement and frees time for other courses.
The Emphasis on Science Practices

A practice is a way to coordinate knowledge and skills in order to accomplish a goal or
task. The science practices enable students to establish lines of evidence and use them to
develop and refine testable explanations and predictions of natural phenomena. Because
content, inquiry, and reasoning are equally important in AP Chemistry, each learning
objective described in the concept outline combines content with inquiry and reasoning
skills described in the science practices.

The science practices that follow the concept outline of this framework capture important
aspects of the work that scientists engage in, at the level of competence expected of AP
Chemistry students. AP Chemistry teachers will see within the learning objectives how
these practices are effectively integrated with the course content, and will be able to design
instruction with these practices in mind.
Overview of the Concept Outline

The key concepts and related content that define the revised AP Chemistry course
and exam are organized around a few underlying principles called the big ideas, which
encompass the core scientific principles, theories, and processes governing chemical
systems. For each of the big ideas, enduring understandings, which incorporate the core
concepts that students should retain from the learning experience, are also identified.
Each enduring understanding is followed by statements of the essential knowledge
necessary to support it. Unless otherwise specified, all of the details in the outline are
required elements of the course and may be needed to successfully meet the learning
objectives tested by the AP Chemistry Exam questions. To help teachers distinguish
content that is essential to support the enduring understandings from the many possible
examples and applications that can overburden a course and to see where important
connections exist among the different content areas particular content components are
emphasized as follows:
Exclusion statements define content or specific details about the content, which
do not need to be included in the course because teaching this level of detail does
not foster students conceptual understanding, or the level of detail represents
knowledge students should have acquired prior to participating in this course.
The content in the exclusion statements will not be assessed on the AP Chemistry
Exam. Exclusion statements are denoted as shown in this example:
Memorization of exceptions to the Aufbau principle is beyond the scope of this

course and the AP Exam.
ote: While excluded content will not be assessed on the AP Chemistry

N
Exam, such content may be provided in the body of exam questions as
background information for the concept and science practice(s) being
assessed. The text indicates if content is excluded because it is prior
knowledge or if it is excluded because it is not essential to an understanding
of the big ideas.
Learning objectives provide clear and detailed articulation of what students
should know and be able to do. Questions for the AP Chemistry Exam will be
written based upon both the content and the science practice designated in the
learning objectives. Each learning objective is designed to help teachers integrate
science practices with specific content, and to provide them with clear information
about how students will be expected to demonstrate their knowledge and abilities.

6
Alignment of the learning objectives to the science practices is denoted in

brackets. For example, in the first learning objective under 1.A.1: The student can
justify the observation that the ratio of the masses of the constituent elements in
any pure sample of that compound is always identical on the basis of the atomic
molecular theory. [See SP 6.1], the bracketed reference points to this science
practice: 6.1 The student can justify claims with evidence.
ote: To develop conceptual understanding, it is essential that the student can
N
draw connections between concepts and engage in reasoning that combines
essential knowledge components from across the curriculum framework. For
this reason, learning objectives may occur at the level of big ideas, enduring
understandings, or essential knowledge. The learning objectives are listed
immediately following the description of the associated big idea, enduring
understanding, or essential knowledge. In addition, some learning objectives
connect to different portions of the curriculum, which is indicated with the
addition of [connects to] at the end of the learning objective.

The Concept Outline

Big Idea 1: The chemical elements are fundamental building
materials of matter, and all matter can be understood in
terms of arrangements of atoms. These atoms retain their
identity in chemical reactions.
The atomic theory of matter is the most fundamental premise of chemistry. A limited
number of chemical elements exist, and the fundamental unit of the chemical identities
they carry is the atom. Although atoms represent the foundational level of chemistry,
observations of chemical properties are always made on collections of atoms, and
macroscopic systems involve such large numbers that they are typically counted in the
unit known as the mole rather than as individual atoms. For elements, many chemical
and physical properties exhibit predictable periodicity as a function of atomic number. In
all chemical and physical changes, atoms are conserved.
Enduring understanding 1.A: All matter is made of atoms. There

are a limited number of types of atoms; these are the elements.
The concept of atoms as the building blocks of all matter is a fundamental premise of
the discipline of chemistry. This concept provides the foundation for conceptualizing,
interpreting, and explaining the macroscopic properties and transformations observed
inside and outside the laboratory in terms of the structure and properties of the
constituent materials. The concept of the mole enables chemists to relate measured masses
in the laboratory to the number of particles present in a sample. These two concepts also
provide the basis for the experimental determination of the purity of a sample through
chemical analysis. The most important aspect of chemistry is not the memorization of the
laws and definitions, but rather the ability to explain how the laws and relationships arise
because of the atomic nature of matter.
Essential knowledge 1.A.1: Molecules are composed of specific

combinations of atoms; different molecules are composed of
combinations of different elements and of combinations of the same
elements in differing amounts and proportions.
a. The average mass of any large number of atoms of a given element is always the
same for a given element.
b. A pure sample contains particles (or units) of one specific atom or molecule; a
mixture contains particles (or units) of more than one specific atom or molecule.
c. Because the molecules of a particular compound are always composed of the
identical combination of atoms in a specific ratio, the ratio of the masses of the
constituent elements in any pure sample of that compound is always the same.
8
d. Pairs of elements that form more than one type of molecule are nonetheless
limited by their atomic nature to combine in whole number ratios. This discrete
nature can be confirmed by calculating the difference in mass percent ratios
between such types of molecules.
Learning Objective for EK 1.A.1:
LO 1.1 The student can justify the observation that the ratio of the masses of the
constituent elements in any pure sample of that compound is always identical on
the basis of the atomic molecular theory. [See SP 6.1]
Essential knowledge 1.A.2: Chemical analysis provides a method for

determining the relative number of atoms in a substance, which can be
used to identify the substance or determine its purity.
a. Because compounds are composed of atoms with known masses, there is a
correspondence between the mass percent of the elements in a compound and the
relative number of atoms of each element.
b. An empirical formula is the lowest whole number ratio of atoms in a compound.
Two molecules of the same elements with identical mass percent of their
constituent atoms will have identical empirical formulas.
c. Because pure compounds have a specific mass percent of each element,
experimental measurements of mass percents can be used to verify the purity of
compounds.
Learning Objectives for EK 1.A.2:
LO 1.2 The student is able to select and apply mathematical routines to mass
data to identify or infer the composition of pure substances and/or mixtures.
[See SP 2.2]
LO 1.3 The student is able to select and apply mathematical relationships to mass
data in order to justify a claim regarding the identity and/or estimated purity of a
substance. [See SP 2.2, 6.1]

Essential knowledge 1.A.3: The mole is the fundamental unit for

counting numbers of particles on the macroscopic level and allows
quantitative connections to be drawn between laboratory experiments,
which occur at the macroscopic level, and chemical processes, which
occur at the atomic level.
a. Atoms and molecules interact with one another on the atomic level. Balanced
chemical equations give the number of particles that react and the number of
particles produced. Because of this, expressing the amount of a substance in terms
of the number of particles, or moles of particles, is essential to understanding
chemical processes.
b. Expressing the mass of an individual atom or molecule in atomic mass unit (amu)
is useful because the average mass in amu of one particle (atom or molecule) of a
substance will always be numerically equal to the molar mass of that substance in
grams.
c. Avogadros number provides the connection between the number of moles in a
pure sample of a substance and the number of constituent particles (or units) of
that substance.
d. Thus, for any sample of a pure substance, there is a specific numerical relationship
between the molar mass of the substance, the mass of the sample, and the number
of particles (or units) present.
LO 1.4 The student is able to connect the number of particles, moles, mass, and
volume of substances to one another, both qualitatively and quantitatively.
[See SP 7.1]
Enduring understanding 1.B: The atoms of each element have

unique structures arising from interactions between electrons
and nuclei.
The shell model arises from experimental data. The shell model forms a basis for
understanding the relative energies of electrons in an atom. The model is based on
Coulombs law and qualitatively predicts ionization energies, which can be measured in
the lab. Understanding how the shell model is consistent with the experimental data is a
key learning goal for this content, beyond simple memorization of the patterns of electron
configurations.

10
Essential knowledge 1.B.1: The atom is composed of negatively charged

electrons, which can leave the atom, and a positively charged nucleus
that is made of protons and neutrons. The attraction of the electrons to
the nucleus is the basis of the structure of the atom. Coulombs law is
qualitatively useful for understanding the structure of the atom.
a. Based on Coulombs law, the force between two charged particles is proportional
to the magnitude of each of the two charges
, and inversely proportional
to the square of the distance, r, between them. (Potential energy is proportional to
) If the two charges are of opposite sign, the force between them is attractive;
if they are of the same sign, the force is repulsive.
b. The first ionization energy is the minimum energy needed to remove the least
tightly held electron from an atom or ion. In general, the ionization energy of any
electron in an atom or ion is the minimum energy needed to remove that electron
from the atom or ion.
c. The relative magnitude of the ionization energy can be estimated through
qualitative application of Coulombs law. The farther an electron is from the
nucleus, the lower its ionization energy. When comparing two species with the
same arrangement of electrons, the higher the nuclear charge, the higher the
ionization energy of an electron in a given subshell.
d. Photoelectron spectroscopy (PES) provides a useful means to engage students
in the use of quantum mechanics to interpret spectroscopic data and extract
information on atomic structure from such data. In particular, low-resolution
PES of atoms provides direct evidence for the shell model. Light consists of
photons, each of which has energy
, where is Plancks constant and is
the frequency of the light. In the photoelectric effect, incident light ejects electrons
from a material. This requires the photon to have sufficient energy to eject the
electron. Photoelectron spectroscopy determines the energy needed to eject
electrons from the material. Measurement of these energies provides a method to
deduce the shell structure of an atom. The intensity of the photoelectron signal at a
given energy is a measure of the number of electrons in that energy level.
e. The electronic structure of atoms with multiple electrons can be inferred from
evidence provided by PES. For instance, both electrons in
are identical, and
they are both roughly the same distance from the nucleus as in H, while there
are two shells of electrons in , and the outermost electron is further from the
nucleus than in H.

11
Learning Objectives for EK 1.B.1:

LO 1.5 The student is able to explain the distribution of electrons in an atom or
ion based upon data. [See SP 1.5, 6.2]
LO 1.6 The student is able to analyze data relating to electron energies for
patterns and relationships. [See SP 5.1]
Essential knowledge 1.B.2: The electronic structure of the atom can

be described using an electron configuration that reflects the concept
of electrons in quantized energy levels or shells; the energetics of the
electrons in the atom can be understood by consideration of Coulombs
law.
a. Electron configurations provide a method for describing the distribution of
electrons in an atom or ion.
b. Each electron in an atom has a different ionization energy, which can be
qualitatively explained through Coulombs law.
c. In multielectron atoms and ions, the electrons can be thought of as being in
shells and subshells, as indicated by the relatively close ionization energies
associated with some groups of electrons. Inner electrons are called core electrons,
and outer electrons are called valence electrons.
d. Core electrons are generally closer to the nucleus than valence electrons, and
they are considered to shield the valence electrons from the full electrostatic
attraction of the nucleus. This phenomenon can be used in conjunction with
Coulombs law to explain/rationalize/predict relative ionization energies.
Differences in electron-electron repulsion are responsible for the differences in
energy between electrons in different orbitals in the same shell.
LO 1.7 The student is able to describe the electronic structure of the atom, using
PES data, ionization energy data, and/or Coulombs law to construct explanations
of how the energies of electrons within shells in atoms vary.
[See SP 5.1, 6.2]
LO 1.8 The student is able to explain the distribution of electrons using
Coulombs law to analyze measured energies. [See SP 6.2]

12
Enduring understanding 1.C: Elements display periodicity in

their properties when the elements are organized according to
increasing atomic number. This periodicity can be explained
by the regular variations that occur in the electronic structures
of atoms. Periodicity is a useful principle for understanding
properties and predicting trends in properties. Its modern-day
uses range from examining the composition of materials to
generating ideas for designing new materials.
Although a simple shell model is not the currently accepted best model of atomic
structure, it is an extremely useful model that can be used qualitatively to explain and/
or predict many atomic properties and trends in atomic properties. In particular, the
arrangement of electrons into shells and subshells is reflected in the structure of the
periodic table and in the periodicity of many atomic properties. Many of these trends in
atomic properties are important for understanding the properties of molecules, and in
being able to explain how the structure of the constituent molecules or atoms relates to
the macroscopic properties of materials. Students should be aware that the shells reflect
the quantization inherent in quantum mechanics and that the labels given to the atomic
orbitals are examples of the quantum numbers used to label the resulting quantized states.
Being aware of the quantum mechanical model as the currently accepted best model for
the atom is important for scientific literacy.
Essential knowledge 1.C.1: Many properties of atoms exhibit periodic

trends that are reflective of the periodicity of electronic structure.
a. The structure of the periodic table is a consequence of the pattern of electron
configurations and the presence of shells (and subshells) of electrons in atoms.
b. Ignoring the few exceptions, the electron configuration for an atom can be
deduced from the elements position in the periodic table.
Memorization of exceptions to the Aufbau principle is beyond the scope of this

course and the AP Exam.
Rationale: The mere rote recall of the exceptions does not match the goals of
the curriculum revision. If given an exception on the AP Exam, students will be
responsible for providing possible reasons for the exceptions based on theory.
c. For many atomic properties, trends within the periodic table (and relative values
for different atoms and ions) can be qualitatively understood and explained using
Coulombs law, the shell model, and the concept of shielding/effective nuclear
charge. These properties include:
1. First ionization energy
2. Atomic and ionic radii

13
3. Electronegativity
4. Typical ionic charges
d. Periodicity is a useful tool when designing new molecules or materials, since
replacing an element of one group with another of the same group may lead to a
new substance with similar properties. For instance, since
can be a ceramic,
may be as well.
Learning Objectives for EK 1.C.1:
LO 1.9 The student is able to predict and/or justify trends in atomic properties
based on location on the periodic table and/or the shell model. [See SP 6.4]
LO 1.10 Students can justify with evidence the arrangement of the periodic table
and can apply periodic properties to chemical reactivity. [See SP 6.1]
LO 1.11 The student can analyze data, based on periodicity and the properties
of binary compounds, to identify patterns and generate hypotheses related to the
molecular design of compounds for which data are not supplied. [See SP 3.1, 5.1]
Essential knowledge 1.C.2: The currently accepted best model of the

atom is based on the quantum mechanical model.
a. Coulombs law is the basis for describing the energy of interaction between
protons and electrons.
b. Electrons are not considered to follow specific orbits. Chemists refer to the region
of space in which an electron is found as an orbital.
c. Electrons in atoms have an intrinsic property known as spin that can result in
atoms having a magnetic moment. There can be at most two electrons in any
orbital, and these electrons must have opposite spin.
d. The quantum mechanical (QM) model addresses known problems with the
classical shell model and is also consistent with atomic electronic structures that
correspond with the periodic table.
e. The QM model can be approximately solved using computers and serves as the
basis for software that calculates the structure and reactivity of molecules.
Assignment of quantum numbers to electrons is beyond the scope of this course and
the AP Exam.
Rationale: Assignment of quantum numbers to electrons does not increase students

conceptual understanding of quantum theory.

14
Learning Objective for EK 1.C.2:

LO 1.12 The student is able to explain why a given set of data suggests, or does
not suggest, the need to refine the atomic model from a classical shell model with
the quantum mechanical model. [See SP 6.3]
Enduring understanding 1.D: Atoms are so small that they are

difficult to study directly; atomic models are constructed to
explain experimental data on collections of atoms.
Because the experimental measurement of ionization energy provides a window into the
overall electronic structure of the atom, this content provides rich opportunities to explore
how scientific models can be constructed and refined in response to available data. The
modern use of mass spectrometry provides another example of how experimental data
can be used to test or reject a scientific model.
Essential knowledge 1.D.1: As is the case with all scientific models, any
model of the atom is subject to refinement and change in response to
new experimental results. In that sense, an atomic model is not regarded
as an exact description of the atom, but rather a theoretical construct
that fits a set of experimental data.
a. Scientists use experimental results to test scientific models. When experimental
results are not consistent with the predictions of a scientific model, the model must
be revised or replaced with a new model that is able to predict/explain the new
experimental results. A robust scientific model is one that can be used to explain/
predict numerous results over a wide range of experimental circumstances.
b. The construction of a shell model of the atom through ionization energy
information provides an opportunity to show how a model can be refined and
changed as additional information is considered.
Learning Objective for EK 1.D.1:
LO 1.13 Given information about a particular model of the atom, the student is
able to determine if the model is consistent with specified evidence. [See SP 5.3]

15
Essential knowledge 1.D.2: An early model of the atom stated that all
atoms of an element are identical. Mass spectrometry data demonstrate
evidence that contradicts this early model.
a. Data from mass spectrometry demonstrate evidence that an early model of the
atom (Daltons model) is incorrect; these data then require a modification of that
model.
b. Data from mass spectrometry also demonstrate direct evidence of different
isotopes from the same element.
c. The average atomic mass can be estimated from mass spectra.
LO 1.14 The student is able to use data from mass spectrometry to identify the
elements and the masses of individual atoms of a specific element.
[See SP 1.4, 1.5]
Essential knowledge 1.D.3: The interaction of electromagnetic waves or

light with matter is a powerful means to probe the structure of atoms
and molecules, and to measure their concentration.
a. The energy of a photon is related to the frequency of the electromagnetic wave
through Plancks equation
. When a photon is absorbed (or emitted) by
a molecule, the energy of the molecule is increased (or decreased) by an amount
equal to the energy of the photon.
b. Different types of molecular motion lead to absorption or emission of photons
in different spectral regions. Infrared radiation is associated with transitions in
molecular vibrations and so can be used to detect the presence of different types
of bonds. Ultraviolet/visible radiation is associated with transitions in electronic
energy levels and so can be used to probe electronic structure.
c. The amount of light absorbed by a solution can be used to determine the
concentration of the absorbing molecules in that solution, via the Beer-Lambert
law.

16
Learning Objectives for EK 1.D.3:

LO 1.15 The student can justify the selection of a particular type of spectroscopy
to measure properties associated with vibrational or electronic motions of
molecules. [See SP 4.1, 6.4]
LO 1.16 The student can design and/or interpret the results of an experiment
regarding the absorption of light to determine the concentration of an absorbing
species in a solution. [See SP 4.2, 5.1]
Enduring understanding 1.E: Atoms are conserved in physical

and chemical processes.
The conservation of mass in chemical and physical transformations is a fundamental
concept, and is a reflection of the atomic model of matter. This concept plays a key role in
much of chemistry, in both quantitative determinations of quantities of materials involved
in chemical systems and transformations, and in the conceptualization and representation
of those systems and transformations.
Essential knowledge 1.E.1: Physical and chemical processes can be

depicted symbolically; when this is done, the illustration must conserve
all atoms of all types.
a. Various types of representations can be used to show that matter is conserved
during chemical and physical processes.
1. Symbolic representations
2. Particulate drawings
b. Because atoms must be conserved during a chemical process, it is possible to
calculate product masses given known reactant masses, or to calculate reactant
masses given product masses.
c. The concept of conservation of atoms plays an important role in the interpretation
and analysis of many chemical processes on the macroscopic scale. Conservation
of atoms should be related to how nonradioactive atoms are neither lost nor gained
as they cycle among land, water, atmosphere, and living organisms.
Learning Objective for EK 1.E.1:
LO 1.17 The student is able to express the law of conservation of mass
quantitatively and qualitatively using symbolic representations and particulate
drawings. [See SP 1.5]

17
Essential knowledge 1.E.2: Conservation of atoms makes it possible

to compute the masses of substances involved in physical and
chemical processes. Chemical processes result in the formation of new
substances, and the amount of these depends on the number and the
types and masses of elements in the reactants, as well as the efficiency
of the transformation.
a. The number of atoms, molecules, or formula units in a given mass of substance
can be calculated.
b. The subscripts in a chemical formula represent the number of atoms of each type
in a molecule.
c. The coefficients in a balanced chemical equation represent the relative numbers of
particles that are consumed and created when the process occurs.
d. The concept of conservation of atoms plays an important role in the interpretation
and analysis of many chemical processes on the macroscopic scale.
e. In gravimetric analysis, a substance is added to a solution that reacts specifically
with a dissolved analyte (the chemical species that is the target of the analysis) to
form a solid. The mass of solid formed can be used to infer the concentration of
the analyte in the initial sample.
f. Titrations may be used to determine the concentration of an analyte in a solution.
The titrant has a known concentration of a species that reacts specifically
with the analyte. The equivalence of the titration occurs when the analyte is
totally consumed by the reacting species in the titrant. The equivalence point is
often indicated by a change in a property (such as color) that occurs when the
equivalence point is reached. This observable event is called the end point of the
titration.
Learning Objectives for EK 1.E.2:
LO 1.18 The student is able to apply conservation of atoms to the rearrangement
of atoms in various processes. [See SP 1.4]
LO 1.19 The student can design, and/or interpret data from, an experiment
that uses gravimetric analysis to determine the concentration of an analyte in a
solution. [See SP 4.2, 5.1, 6.4]
LO 1.20 The student can design, and/or interpret data from, an experiment that
uses titration to determine the concentration of an analyte in a solution.
[See SP 4.2, 5.1, 6.4]

18
Big Idea 2: Chemical and physical properties of materials

can be explained by the structure and the arrangement of
atoms, ions, or molecules and the forces between them.
Transformations of matter can be observed in multiple ways that are generally categorized
as either chemical or physical change. These categories can generally be distinguished
through consideration of the electrostatic (Coulombic) forces that are associated with a
given change at the particulate level. The strength of such forces falls along a continuum,
with the strongest forces generally being chemical bonds. Chemical changes involve the
making and breaking of chemical bonds. For physical changes, the forces being overcome
are weaker intermolecular interactions, which are also Coulombic in nature. The shapes
of the particles involved, and the space between them, are key factors in determining the
nature of these physical changes. Using only these general concepts of varying strengths of
chemical bonds and weaker intermolecular interactions, many properties of a wide range
of chemical systems can be understood.
Learning Objectives for Big Idea 2:

LO 2.1 Students can predict properties of substances based on their chemical
formulas, and provide explanations of their properties based on particle views.
[See SP 6.4, 7.1]
LO 2.2 The student is able to explain the relative strengths of acids and bases
based on molecular structure, interparticle forces, and solution equilibrium.
[See SP 7.2, connects to Big Idea 5, Big Idea 6]
Note: These learning objectives apply to essential knowledge components of
2A2D.
Enduring understanding 2.A: Matter can be described by its

physical properties. The physical properties of a substance
generally depend on the spacing between the particles (atoms,
molecules, ions) that make up the substance and the forces of
attraction among them.
There is a relationship between the macroscopic properties of solids, liquids, and gases, and
the structure of the constituent particles of those materials on the molecular and atomic
scale. The properties of solids, liquids, and gases also reflect the relative orderliness of the
arrangement of particles in those states, their relative freedom of motion, and the nature and
strength of the interactions between them. For gases, volumetric relationships can be used to
describe ideal behavior, and a conceptual understanding of that behavior can be constructed
based on the atomic model and a relatively simple kinetic molecular theory (KMT).

19
Solutions are an important class of mixtures; of particular importance is a conceptual

understanding on the molecular level of the structure and composition of a liquid
solution. In addition, the energetics of solution formation can be understood qualitatively
through consideration of the interactions and structure of the components before and
after the creation of the solution.
Essential knowledge 2.A.1: The different properties of solids and

liquids can be explained by differences in their structures, both at the
particulate level and in their supramolecular structures.
a. Solids can be crystalline, where the particles are arranged in a regular 3-D
structure, or they can be amorphous, where the particles do not have a regular,
orderly arrangement. In both cases, the motion of the individual particles is
limited, and the particles do not undergo any overall translation with respect to
each other. Interparticle interactions and the ability to pack the particles together
provide the main criteria for the structures of solids.
b. The constituent particles in liquids are very close to each other, and they are
continually moving and colliding. The particles are able to undergo translation
with respect to each other and their arrangement, and movement is influenced by
the nature and strength of the intermolecular forces that are present.
c. The solid and liquid phases for a particular substance generally have relatively
small differences in molar volume because in both cases the constituent particles
are very close to each other at all times.
d. The differences in other properties, such as viscosity, surface tension, and volumes
of mixing (for liquids), and hardness and macroscopic crystal structure (for
solids), can be explained by differences in the strength of attraction between the
particles and/or their overall organization.
e. Heating and cooling curves for pure substances provide insight into the energetics
of liquid/solid phase changes.
LO 2.3 The student is able to use aspects of particulate models (i.e., particle
spacing, motion, and forces of attraction) to reason about observed differences
between solid and liquid phases and among solid and liquid materials.
[See SP 6.4, 7.1]

20
Essential knowledge 2.A.2: The gaseous state can be effectively

modeled with a mathematical equation relating various macroscopic
properties. A gas has neither a definite volume nor a definite shape;
because the effects of attractive forces are minimal, we usually assume
that the particles move independently.
a. Ideal gases exhibit specific mathematical relationships among the number of
particles present, the temperature, the pressure, and the volume.
b. In a mixture of ideal gases, the pressure exerted by each component (the partial
pressure) is independent of the other components. Therefore, the total pressure is
the sum of the partial pressures.
c. Graphical representations of the relationships between P, V, and T are useful to
describe gas behavior.
d. Kinetic molecular theory combined with a qualitative use of the MaxwellBoltzmann distribution provides a robust model for qualitative explanations of
these mathematical relationships.
e. Some real gases exhibit ideal or near-ideal behavior under typical laboratory
conditions. Laboratory data can be used to generate or investigate the relationships
in 2.A.2.a and to estimate absolute zero on the Celsius scale.
f. All real gases are observed to deviate from ideal behavior, particularly under
conditions that are close to those resulting in condensation. Except at extremely
high pressures that are not typically seen in the laboratory, deviations from
ideal behavior are the result of intermolecular attractions among gas molecules.
These forces are strongly distance-dependent, so they are most significant during
collisions.
g. Observed deviations from ideal gas behavior can be explained through an
understanding of the structure of atoms and molecules and their intermolecular
interactions.
Phase diagrams are beyond the scope of this course and the AP Exam.
Rationale: Phase diagrams are standard in all high school chemistry textbooks and
therefore are considered prior knowledge.

21

LO 2.4 The student is able to use KMT and concepts of intermolecular forces to
make predictions about the macroscopic properties of gases, including both ideal
and nonideal behaviors. [See SP 1.4, 6.4]
LO 2.5 The student is able to refine multiple representations of a sample of matter
in the gas phase to accurately represent the effect of changes in macroscopic
properties on the sample. [See SP 1.3, 6.4, 7.2]
LO 2.6 The student can apply mathematical relationships or estimation to
determine macroscopic variables for ideal gases. [See SP 2.2, 2.3]
Essential knowledge 2.A.3: Solutions are homogenous mixtures in which

the physical properties are dependent on the concentration of the solute
and the strengths of all interactions among the particles of the solutes
and solvent.
a. In a solution (homogeneous mixture), the macroscopic properties do not vary
throughout the sample. This is in contrast to a heterogeneous mixture in which
the macroscopic properties depend upon the location in the mixture. The
distinction between heterogeneous and homogeneous depends on the length
scale of interest. As an example, colloids may be heterogeneous on the scale of
micrometers, but homogeneous on the scale of centimeters.
b. Solutions come in the form of solids, liquids, and gases.
c. For liquid solutions, the solute may be a gas, a liquid, or a solid.
d. Based on the reflections of their structure on the microscopic scale, liquid
solutions exhibit several general properties:
1. The components cannot be separated by using filter paper.
2. There are no components large enough to scatter visible light.
3. The components can be separated using processes that are a result of the
intermolecular interactions between and among the components.
e. Chromatography (paper and column) separates chemical species by taking
advantage of the differential strength of intermolecular interactions between and
among the components.
f. Distillation is used to separate chemical species by taking advantage of the
differential strength of intermolecular interactions between and among the
components and the effects these interactions have on the vapor pressures of the
components in the mixture.

22
g. The formation of a solution may be an exothermic or endothermic process,

depending on the relative strengths of intermolecular/interparticle interactions
before and after the dissolution process.
h. Generally, when ionic compounds are dissolved in water, the component ions are
separated and dispersed. The presence of ions in a solution can be detected by use
of conductivity measurements.
i. Solution composition can be expressed in a variety of ways; molarity is the most
common method used in the laboratory. Molarity is defined as the number of
moles of solute per liter of solution.
j. Understanding how to prepare solutions of specified molarity through direct
mixing of the components, through use of volumetric glassware, and by
dilution of a solution of known molarity with additional solvent is important for
performing laboratory work in chemistry.
Colligative properties are beyond the scope of this course and the AP Exam and are
therefore considered prior knowledge and not directly assessed on the exam.
Calculations of molality, percent by mass, and percent by volume are beyond the
scope of this course and the AP Exam.
Rationale: Molality pertains to colligative properties, which are considered prior

knowledge and therefore molality will not be assessed on the exam.
LO 2.7 The student is able to explain how solutes can be separated by
chromatography based on intermolecular interactions. [See SP 6.2]
LO 2.8 The student can draw and/or interpret representations of solutions that
show the interactions between the solute and solvent. [See SP 1.1, 1.2, 6.4]
LO 2.9 The student is able to create or interpret representations that link the
concept of molarity with particle views of solutions. [See SP 1.1, 1.4]
LO 2.10 The student can design and/or interpret the results of a separation
experiment (filtration, paper chromatography, column chromatography, or
distillation) in terms of the relative strength of interactions among and between
the components. [See SP 4.2, 5.1, 6.4]

23
Enduring understanding 2.B: Forces of attraction between

particles (including the noble gases and also different parts
of some large molecules) are important in determining many
macroscopic properties of a substance, including how the
observable physical state changes with temperature.
Chemists categorize intermolecular interactions based on the structural features giving
rise to the interaction. Although there are some trends in the relative strengths of
these interactions, the specific structure and size of the particles involved can play a
very important role in determining the overall strength of a particular intermolecular
(or intramolecular) interaction. The properties of condensed phases and of many
crucial biological structures are determined by the nature and strength of these
interactions. Deviation from ideal gas behavior is generally a reflection of the presence
of intermolecular interactions between gas particles. Thus, in all phases, the structure of
particles on the molecular level is directly related to the properties of both the particles
themselves and the behavior of macroscopic collections of those molecules.
Essential knowledge 2.B.1: London dispersion forces are attractive forces

present between all atoms and molecules. London dispersion forces are
often the strongest net intermolecular force between large molecules.
a. A temporary, instantaneous dipole may be created by an uneven distribution of
electrons around the nucleus (nuclei) of an atom (molecule).
b. London dispersion forces arise due to the Coulombic interaction of the temporary
dipole with the electron distribution in neighboring atoms and molecules.
c. Dispersion forces increase with contact area between molecules and with
increasing polarizability of the molecules. The polarizability of a molecule
increases with the number of electrons in the molecule, and is enhanced by the
presence of pi bonding.
Learning Objective for EK 2.B.1:
LO 2.11 The student is able to explain the trends in properties and/or predict
properties of samples consisting of particles with no permanent dipole on the
basis of London dispersion forces. [See SP 6.2, 6.4]

24
Essential knowledge 2.B.2: Dipole forces result from the attraction among
the positive ends and negative ends of polar molecules. Hydrogen
bonding is a strong type of dipole-dipole force that exists when very
electronegative atoms (N, O, and F) are involved.
a. Molecules with dipole moments experience Coulombic interactions that result in a
net attractive interaction when they are near each other.
1. Intermolecular dipole-dipole forces are weaker than ionic forces or covalent
bonds.
2. Interactions between polar molecules are typically greater than between
nonpolar molecules of comparable size because these interactions act in
addition to London dispersion forces.
3. Dipole-dipole attractions can be represented by diagrams of attraction
between the positive and negative ends of polar molecules trying to maximize
attractions and minimize repulsions in the liquid or solid state.
4. Dipole-induced dipole interactions are present between a polar and nonpolar
molecule. The strength of these forces increases with the magnitude of the
dipole of the polar molecule and with the polarizability of the nonpolar
molecule.
b. Hydrogen bonding is a relatively strong type of intermolecular interaction
that exists when hydrogen atoms that are covalently bonded to the highly
electronegative atoms (N, O, and F) are also attracted to the negative end of a
dipole formed by the electronegative atom (N, O, and F) in a different molecule,
or a different part of the same molecule. When hydrogen bonding is present, even
small molecules may have strong intermolecular attractions.
Other cases of much weaker hydrogen bonding are beyond the scope of the
AP Chemistry course and exam.
Rationale: The hydrogen bonding that occurs when hydrogen is bonded to highly
electronegative atoms (N, O, and F) will be emphasized as will the electrostatic
versus covalent nature of the bond. We will not include other cases of much weaker
hydrogen bonding in the AP Chemistry course.
c. Hydrogen bonding between molecules, or between different parts of a single
molecule, may be represented by diagrams of molecules with hydrogen bonding
and indications of location of hydrogen bonding.
d. Ionic interactions with dipoles are important in the solubility of ionic compounds
in polar solvents.

25

LO 2.12 The student can qualitatively analyze data regarding real gases
to identify deviations from ideal behavior and relate these to molecular
interactions.
[See SP 5.1, 6.5, connects to 2.A.2]
LO 2.13 The student is able to describe the relationships between the structural
features of polar molecules and the forces of attraction between the particles.
[See SP 1.4, 6.4]
LO 2.14 The student is able to apply Coulombs law qualitatively (including using
representations) to describe the interactions of ions, and the attractions between
ions and solvents to explain the factors that contribute to the solubility of ionic
compounds. [See SP 1.4, 6.4]
Essential knowledge 2.B.3: Intermolecular forces play a key role in

determining the properties of substances, including biological structures
and interactions.
a. Many properties of liquids and solids are determined by the strengths and types of
intermolecular forces present.
1. Boiling point
2. Surface tension
3. Capillary action
4. Vapor pressure
b. Substances with similar intermolecular interactions tend to be miscible or soluble
in one another.
c. The presence of intermolecular forces among gaseous particles, including noble
gases, leads to deviations from ideal behavior, and it can lead to condensation at
sufficiently low temperatures and/or sufficiently high pressures.
d. Graphs of the pressure-volume relationship for real gases can demonstrate the
deviation from ideal behavior; these deviations can be interpreted in terms of the
presence and strengths of intermolecular forces.

26
e. The structure and function of many biological systems depend on the strength and
nature of the various Coulombic forces.
1. Substrate interactions with the active sites in enzyme catalysis
2. Hydrophilic and hydrophobic regions in proteins that determine threedimensional structure in water solutions
LO 2.15 The student is able to explain observations regarding the solubility of
ionic solids and molecules in water and other solvents on the basis of particle
views that include intermolecular interactions and entropic effects. [See SP 1.4,
6.2, connects to 5.E.1]
LO 2.16 The student is able to explain the properties (phase, vapor pressure,
viscosity, etc.) of small and large molecular compounds in terms of the strengths
and types of intermolecular forces. [See SP 6.2]
Enduring understanding 2.C: The strong electrostatic forces of

attraction holding atoms together in a unit are called chemical
bonds.
Covalent bonds, ionic bonds, and metallic bonds are distinct from (and significantly
stronger than) typical intermolecular interactions. Electronegativity can be used to reason
about the type of bonding present between two atoms. Covalent chemical bonds can be
modeled as the sharing of one or more pairs of valence electrons between two atoms in a
molecule. The extent to which this sharing is unequal can be predicted from the relative
electronegativities of the atoms involved; the relative electronegativities can generally
be understood through application of the shell model and Coulombs law. The Lewis
structure model, combined with valence shell electron pair repulsion (VSEPR), can be
used to predict many structural features of covalently bonded molecules and ions. Ionic
bonding is the phrase used to describe the strong Coulombic interaction between ions in
an ionic substance. The bonding in metals is characterized by delocalization of valence
electrons.
Learning Objective for EU 2.C:

LO 2.17 The student can predict the type of bonding present between two
atoms in a binary compound based on position in the periodic table and the
electronegativity of the elements. [See SP 6.4]

27
Essential knowledge 2.C.1: In covalent bonding, electrons are shared

between the nuclei of two atoms to form a molecule or polyatomic ion.
Electronegativity differences between the two atoms account for the
distribution of the shared electrons and the polarity of the bond.
a. Electronegativity is the ability of an atom in a molecule to attract shared electrons
to it.
b. Electronegativity values for the representative elements increase going from left
to right across a period and decrease going down a group. These trends can be
understood qualitatively through the electronic structure of the atoms, the shell
model, and Coulombs law.
c. Two or more valence electrons shared between atoms of identical electronegativity
constitute a nonpolar covalent bond.
d. However, bonds between carbon and hydrogen are often considered to be
nonpolar even though carbon is slightly more electronegative than hydrogen. The
formation of a nonpolar covalent bond can be represented graphically as a plot of
potential energy vs. distance for the interaction of two identical atoms. Hydrogen
atoms are often used as an example.
1. The relative strengths of attractive and repulsive forces as a function of
distance determine the shape of the graph.
2. The bond length is the distance between the bonded atoms nuclei, and is the
distance of minimum potential energy where the attractive and repulsive
forces are balanced.
3. The bond energy is the energy required for the dissociation of the bond. This
is the net energy of stabilization of the bond compared to the two separated
atoms. Typically, bond energy is given on a per mole basis.
e. Two or more valence electrons shared between atoms of unequal electronegativity
constitute a polar covalent bond.
1. The difference in electronegativity for the two atoms involved in a polar
covalent bond is not equal to zero.
2. The atom with a higher electronegativity will develop a partial negative charge
relative to the other atom in the bond. For diatomic molecules, the partial
negative charge on the more electronegative atom is equal in magnitude to the
partial positive charge on the less electronegative atom.
3. Greater differences in electronegativity lead to greater partial charges, and
consequently greater bond dipoles.
4. The sum of partial charges in any molecule or ion must be equal to the overall
charge on the species.

28
f. All bonds have some ionic character, and the difference between ionic and
covalent bonding is not distinct but rather a continuum. The difference in
electronegativity is not the only factor in determining if a bond is designated
ionic or covalent. Generally, bonds between a metal and nonmetal are ionic, and
between two nonmetals the bonds are covalent. Examination of the properties of
a compound is the best way to determine the type of bonding.
LO 2.18 The student is able to rank and justify the ranking of bond polarity on
the basis of the locations of the bonded atoms in the periodic table. [See SP 6.1]
Essential knowledge 2.C.2: Ionic bonding results from the net attraction
between oppositely charged ions, closely packed together in a crystal
lattice.
a. The cations and anions in an ionic crystal are arranged in a systematic, periodic
3-D array that maximizes the attractive forces among cations and anions while
minimizing the repulsive forces.
Knowledge of specific types of crystal structures is beyond the scope of this course
and the AP Exam.
Rationale: The study of crystal structures does not strengthen understanding of the
big ideas.
b. Coulombs law describes the force of attraction between the cations and anions in
an ionic crystal.
1. Because the force is proportional to the charge on each ion, larger charges lead
to stronger interactions.
2. Because the force is inversely proportional to the square of the distance
between the centers of the ions (nuclei), smaller ions lead to stronger
interactions.
LO 2.19 The student can create visual representations of ionic substances
that connect the microscopic structure to macroscopic properties, and/or use
representations to connect the microscopic structure to macroscopic properties
(e.g., boiling point, solubility, hardness, brittleness, low volatility, lack of
malleability, ductility, or conductivity). [See SP 1.1, 1.4, 7.1, connects to 2.D.1,
2.D.2]

29
Essential knowledge 2.C.3: Metallic bonding describes an array of

positively charged metal cores surrounded by a sea of mobile valence
electrons.
a. The valence electrons from the metal atoms are considered to be delocalized and
not associated with any individual atom.
b. Metallic bonding can be represented as an array of positive metal ions with
valence electrons drawn among them, as if the electrons were moving (i.e., a sea of
electrons).
c. The electron sea model can be used to explain several properties of metals,
including electrical conductivity, malleability, ductility, and low volatility.
d. The number of valence electrons involved in metallic bonding, via the shell model,
can be used to understand patterns in these properties, and can be related to the
shell model to reinforce the connections between metallic bonding and other
forms of bonding.
LO 2.20 The student is able to explain how a bonding model involving
delocalized electrons is consistent with macroscopic properties of metals (e.g.,
conductivity, malleability, ductility, and low volatility) and the shell model of the
atom. [See SP 6.2, 7.1, connects to 2.D.2]
Essential knowledge 2.C.4: The localized electron bonding model

describes and predicts molecular geometry using Lewis diagrams and
the VSEPR model.
a. Lewis diagrams can be constructed according to a well-established set of
principles.
b. The VSEPR model uses the Coulombic repulsion between electrons as a basis for
predicting the arrangement of electron pairs around a central atom.
c. In cases where more than one equivalent Lewis structure can be constructed,
resonance must be included as a refinement to the Lewis structure approach in
order to provide qualitatively accurate predictions of molecular structure and
properties (in some cases).
d. Formal charge can be used as a criterion for determining which of several possible
valid Lewis diagrams provides the best model for predicting molecular structure
and properties.
The use of formal charge to explain why certain molecules do not obey the octet rule
is beyond the scope of this course and the AP Exam.

30
Rationale: Explaining why certain molecules do NOT obey the octet rule is beyond
the scope of the course. The scope of the course DOES include the use of formal
charge to evaluate different structures that follow the octet rule and the limitations
of using Lewis structures for molecules with odd numbers of electrons or expanded
octets.
e. The combination of Lewis diagrams with the VSEPR model provides a powerful
model for predicting structural properties of many covalently bonded molecules
and polyatomic ions, including the following:
1. Molecular geometry
2. Bond angles
3. Relative bond energies based on bond order
4. Relative bond lengths (multiple bonds, effects of atomic radius)
5. Presence of a dipole moment
f. As with any model, there are limitations to the use of the Lewis structure model,
particularly in cases with an odd number of valence electrons. Recognizing that
Lewis diagrams have limitations is of significance.
Learning how to defend Lewis models based on assumptions about the limitations of
the models is beyond the scope of this course and the AP Exam.
Rationale: Learning how to defend Lewis models does not strengthen understanding
of the big ideas.
g. Organic chemists commonly use the terms hybridization and hybrid orbital
to describe the arrangement of electrons around a central atom. When there is
a bond angle of 180, the central atom is said to be sp hybridized; for 120, the
central atom is
hybridized; and for 109, the central atom is
hybridized.
Students should be aware of this terminology, and be able to use it. When an atom
has more than four pairs of electrons surrounding the central atom, students are
only responsible for the shape of the resulting molecule.
An understanding of the derivation and depiction of these orbitals is beyond the
scope of this course and the AP Exam. Current evidence suggests that hybridization
involving d orbitals does not exist, and there is controversy about the need to teach
any hybridization. Until there is agreement in the chemistry community, we will
continue to include sp, , and
hybridization in the current course.
Rationale: The course includes the distinction between sigma and pi bonding,
the use of VSEPR to explain the shapes of molecules, and the sp, , and
nomenclature. Additional aspects related to hybridization are both controversial
and do not substantially enhance understanding of molecular structure.
h. Bond formation is associated with overlap between atomic orbitals. In multiple

bonds, such overlap leads to the formation of both sigma and pi bonds. The overlap
31
is stronger in sigma than pi bonds, which is reflected in sigma bonds having larger
bond energy than pi bonds. The presence of a pi bond also prevents the rotation of
the bond, and leads to structural isomers. In systems, such as benzene, where atomic
p-orbitals overlap strongly with more than one other p-orbital, extended pi bonding
exists, which is delocalized across more than two nuclei. Such descriptions provide
an alternative description to resonance in Lewis structures. A useful example of
delocalized pi bonding is molecular solids that conduct electricity. The discovery
of such materials at the end of the 1970s overturned a long-standing assumption in
chemistry that molecular solids will always be insulators.
i. Molecular orbital theory describes covalent bonding in a manner that can
capture a wider array of systems and phenomena than the Lewis or VSEPR
models. Molecular orbital diagrams, showing the correlation between atomic and
molecular orbitals, are a useful qualitative tool related to molecular orbital theory.
Other aspects of molecular orbital theory, such as recall or filling of molecular

orbital diagrams, are beyond the scope of this course and the AP Exam.
Rationale: As currently covered in freshman college chemistry textbooks, molecular

orbital theory is superficially taught and limited to homonuclear molecules in the
second period. Algorithmic filling of such MO diagrams does not lead to a deeper
conceptual understanding of bonding. The course does include the important
distinction between sigma and pi bonding.
LO 2.21 The student is able to use Lewis diagrams and VSEPR to predict the
geometry of molecules, identify hybridization, and make predictions about
polarity. [See SP 1.4]
Enduring understanding 2.D: The type of bonding in the solid

state can be deduced from the properties of the solid state.
In solids, the properties of the material reflect the nature and strength of the interactions
between the constituent particles. For this reason, the type of bonding that predominates
in a solid material, and the nature of the interactions between the particles comprising the
solid, can generally be inferred from the observed macroscopic properties of the material.
Properties such as vapor pressure, conductivity as a solid and in aqueous solution, and
relative brittleness or hardness can generally be explained in this way.
Although recognizing the properties that can be associated with a particular type of
bonding is valuable in categorizing materials, relating those properties to the structure
of the materials on the molecular scale, and being able to make reasoned predictions of
the properties of a solid based on its constituent particles, provides evidence of deeper
conceptual understanding.

32
Learning Objective for EU 2.D:

LO 2.22 The student is able to design or evaluate a plan to collect and/or
interpret data needed to deduce the type of bonding in a sample of a solid. [See
SP 4.2, 6.4]
Essential knowledge 2.D.1: Ionic solids have high melting points, are
brittle, and conduct electricity only when molten or in solution.
a. Many properties of ionic solids are related to their structure.
1. Ionic solids generally have low vapor pressure due to the strong Coulombic
interactions of positive and negative ions arranged in a regular threedimensional array.
2. Ionic solids tend to be brittle due to the repulsion of like charges caused when
one layer slides across another layer.
3. Ionic solids do not conduct electricity. However, when ionic solids are melted,
they do conduct electricity because the ions are free to move.
4. When ionic solids are dissolved in water, the separated ions are free to move;
therefore, these solutions will conduct electricity. Dissolving a nonconducting
solid in water, and observing the solutions ability to conduct electricity, is one
way to identify an ionic solid.
5. Ionic compounds tend not to dissolve in nonpolar solvents because the
attractions among the ions are much stronger than the attractions among the
separated ions and the nonpolar solvent molecules.
b. The attractive force between any two ions is governed by Coulombs law: The force
is directly proportional to the charge of each ion and inversely proportional to the
square of the distance between the centers of the ions.
1. For ions of a given charge, the smaller the ions, and thus the smaller the
distance between ion centers, the stronger the Coulombic force of attraction,
and the higher the melting point.
2. Ions with higher charges lead to higher Coulombic forces, and therefore higher
melting points.
The study of the specific varieties of crystal lattices for ionic compounds is beyond
the scope of this course and the AP Exam.
Rationale: This topic has not been part of AP Chemistry for many years and
including the topic in the new course was not viewed as the best way to deepen
understanding of the big ideas.

33

LO 2.23 The student can create a representation of an ionic solid that shows
essential characteristics of the structure and interactions present in the
substance. [See SP 1.1]
LO 2.24 The student is able to explain a representation that connects properties
of an ionic solid to its structural attributes and to the interactions present at the
atomic level. [See SP 1.1, 6.2, 7.1]
Essential knowledge 2.D.2: Metallic solids are good conductors of heat

and electricity, have a wide range of melting points, and are shiny,
malleable, ductile, and readily alloyed.
a. A metallic solid can be represented as positive kernels (or cores) consisting of the
nucleus and inner electrons of each atom surrounded by a sea of mobile valence
electrons.
1. Metals are good conductors because the electrons are delocalized and relatively
free to move.
2. Metals are malleable and ductile because deforming the solid does not change
the environment immediately surrounding each metal core.
b. Metallic solids are often pure substances, but may also be mixtures called alloys.
1. Some properties of alloys can be understood in terms of the size of the
component atoms:
Interstitial alloys form between atoms of different radius, where the smaller
atoms fill the interstitial spaces between the larger atoms. (Steel is an example
in which carbon occupies the interstices in iron.) The interstitial atoms make
the lattice more rigid, decreasing malleability and ductility.
Substitutional alloys form between atoms of comparable radius, where one
atom substitutes for the other in the lattice. (Brass is an example in which some
copper atoms are substituted with a different element, usually zinc.) The density
typically lies between those of the component metals, as with interstitial alloys,
substitutional alloys are less malleable and ductile than pure metals.
2. Alloys typically retain a sea of mobile electrons and so remain conducting.
3. Often the surface of a metal or alloy is changed through a chemical reaction.
An example is formation of a chemically inert oxide layer in stainless steel,
through reaction with oxygen in the air.

34

LO 2.25 The student is able to compare the properties of metal alloys with their
constituent elements to determine if an alloy has formed, identify the type of
alloy formed, and explain the differences in properties using particulate level
reasoning. [See SP 1.4, 7.2]
LO 2.26 Students can use the electron sea model of metallic bonding to predict
or make claims about the macroscopic properties of metals or alloys.
[See SP 6.4, 7.1]
LO 2.27 The student can create a representation of a metallic solid that shows
essential characteristics of the structure and interactions present in the substance.
[See SP 1.1]
of a metallic solid to its structural attributes and to the interactions present at the
Essential knowledge 2.D.3: Covalent network solids have properties

that reflect their underlying 2-D or 3-D networks of covalent bonds.
Covalent network solids generally have extremely high melting
points and are hard.
a. Covalent network solids consist of atoms that are covalently bonded together into
a two-dimensional or three-dimensional network.
1. Covalent network solids are only formed from nonmetals: elemental (diamond,
graphite) or two nonmetals (silicon dioxide and silicon carbide).
2. The properties of covalent network solids are a reflection of their structure.
3. Covalent network solids have high melting points because all of the atoms are
covalently bonded.
4. Three-dimensional covalent networks tend to be rigid and hard because the
covalent bond angles are fixed.
5. Generally, covalent network solids form in the carbon group because of their
ability to form four covalent bonds.
b. Graphite is an allotrope of carbon that forms sheets of two-dimensional networks.
1. Graphite has a high melting point because the covalent bonds between the
carbon atoms making up each layer are relatively strong.
2. Graphite is soft because adjacent layers can slide past each other relatively easily;
the major forces of attraction between the layers are London dispersion forces.
35
c. Silicon is a covalent network solid and a semiconductor.

1. Silicon forms a three-dimensional network similar in geometry to a diamond.
2. Silicons conductivity increases as temperature increases.
3. Periodicity can be used to understand why doping with an element with one
extra valence electron converts silicon into an n-type semiconducting (negative
charge carrying) material, while doping with an element with one less valence
electron converts silicon into a p-type semiconducting (positive charge
carrying) material. Junctions between n-doped and p-doped materials can be
used to control electron flow, and thereby are the basis of modern electronics.
LO 2.29 The student can create a representation of a covalent solid that
shows essential characteristics of the structure and interactions present in the
of a covalent solid to its structural attributes and to the interactions present at the
Essential knowledge 2.D.4: Molecular solids with low molecular weight

usually have low melting points and are not expected to conduct
electricity as solids, in solution, or when molten.
a. Molecular solids consist of nonmetals, diatomic elements, or compounds formed
from two or more nonmetals.
b. Molecular solids are composed of distinct, individual units of covalently bonded
molecules attracted to each other through relatively weak intermolecular forces.
1. Molecular solids are not expected to conduct electricity because their electrons
are tightly held within the covalent bonds of each constituent molecule.
2. Molecular solids generally have a low melting point because of the relatively
weak intermolecular forces present between the molecules.
3. Molecular solids are sometimes composed of very large molecules, or
polymers, with important commercial and biological applications.

36

LO 2.31 The student can create a representation of a molecular solid that
shows essential characteristics of the structure and interactions present in the
of a molecular solid to its structural attributes and to the interactions present at
the atomic level. [See SP 1.1, 6.2, 7.1]

37
Big Idea 3: Changes in matter involve the rearrangement

and/or reorganization of atoms and/or the transfer of
electrons.
When chemical changes occur, the new substances formed have properties that are
distinguishable from the initial substance or substances. Such chemical processes may
be observed in a variety of ways, and often involve changes in energy as well. Chemical
change is depicted in several ways, with the most important and informative one being
the balanced chemical equation for the reaction. Because there is a large diversity of
possible chemical reactions, it is useful to categorize reactions and be able to recognize the
category into which a given reaction falls.
Learning Objective for Big Idea 3:

LO 3.1 Students can translate among macroscopic observations of change, chemical
equations, and particle views. [See SP 1.5, 7.1]
Note: This learning objective applies to essential knowledge components of 3A3C.
Enduring understanding 3.A: Chemical changes are represented

by a balanced chemical equation that identifies the ratios with
which reactants react and products form.
Chemical reactions are the primary means by which transformations in matter occur.
Chemical equations for reactions efficiently communicate the rearrangements of atoms that
occur during a chemical reaction. Describing a chemical change can include different forms
of the equation, such as molecular, ionic, and net ionic. The equation provides information
about atoms, ions and/or molecules reacting (not how they react) at the particulate level, as
well as quantitative information about stoichiometry at the macroscopic level. Many chemical
reactions involve small whole number ratios of reactants and products as expressed by the
stoichiometric coefficients of the balanced equation. Many modern materials are composed of
non-stoichiometric combinations of the constituent elements.
Essential knowledge 3.A.1: A chemical change may be represented by a

molecular, ionic, or net ionic equation.
a. Chemical equations represent chemical changes, and therefore must contain equal
numbers of atoms of every element on each side to be balanced.
b. Depending on the context in which it is used, there are different forms of the
balanced chemical equations that are used by chemists. It is important not only to
write a balanced molecular, ionic, or net ionic reaction equation, but also to have
an understanding of the circumstances under which any of them might be the
most useful form.
38
c. The balanced chemical equation for a reaction is capable of representing chemistry

at any level, and thus it is important that it can be translated into a symbolic
depiction at the particulate level, where much of the reasoning of chemistry
occurs.
d. Because chemistry is ultimately an experimental science, it is important that
students be able to describe chemical reactions observed in a variety of laboratory
contexts.
LO 3.2 The student can translate an observed chemical change into a balanced
chemical equation and justify the choice of equation type (molecular, ionic, or
net ionic) in terms of utility for the given circumstances. [See SP 1.5, 7.1]
Essential knowledge 3.A.2: Quantitative information can be derived from

stoichiometric calculations that utilize the mole ratios from the balanced
chemical equations. The role of stoichiometry in real-world applications
is important to note, so that it does not seem to be simply an exercise
done only by chemists.
a. Coefficients of balanced chemical equations contain information regarding the
proportionality of the amounts of substances involved in the reaction. These
values can be used in chemical calculations that apply the mole concept; the most
important place for this type of quantitative exercise is the laboratory.
1. Calculate amount of product expected to be produced in a laboratory
experiment.
2. Identify limiting and excess reactant; calculate percent and theoretical yield for
a given laboratory experiment.
b. The use of stoichiometry with gases also has the potential for laboratory
experimentation, particularly with respect to the experimental determination of
molar mass of a gas.
c. Solution chemistry provides an additional avenue for laboratory calculations of
stoichiometry, including titrations.

39

LO 3.3 The student is able to use stoichiometric calculations to predict the results
of performing a reaction in the laboratory and/or to analyze deviations from the
expected results. [See SP 2.2, 5.1]
LO 3.4 The student is able to relate quantities (measured mass of substances,
volumes of solutions, or volumes and pressures of gases) to identify stoichiometric
relationships for a reaction, including situations involving limiting reactants and
situations in which the reaction has not gone to completion. [See SP 2.2, 5.1, 6.4]
Enduring understanding 3.B: Chemical reactions can be classified

by considering what the reactants are, what the products are,
or how they change from one into the other. Classes of chemical
reactions include synthesis, decomposition, acid-base, and
oxidation-reduction reactions.
There are a vast number of possible chemical reactions. In order to study and make predictions
and comparisons concerning such a wide array of reactions, chemists have devised ways to
classify them. Because of their prevalence in the laboratory and in real-world applications, two
categories of reactions that are of particular importance are acid-base reactions and oxidationreduction reactions. Also, a key contribution of chemistry to society is the creation of new
materials or compounds that benefit the health and welfare of people in the community. Most
often the creation of new materials or compounds can be considered as synthesis reactions,
another important reaction category.
Essential knowledge 3.B.1: Synthesis reactions are those in which atoms

and/or molecules combine to form a new compound. Decomposition is
the reverse of synthesis, a process whereby molecules are decomposed,
often by the use of heat.
a. Synthesis or decomposition reactions can be used for acquisition of basic lab
techniques and observations that help students deal with the abstractions of atoms
and stoichiometric calculations.

40

LO 3.5 The student is able to design a plan in order to collect data on the synthesis or
decomposition of a compound to confirm the conservation of matter and the law of
definite proportions. [See SP 2.1, 4.2, 6.4]
LO 3.6 The student is able to use data from synthesis or decomposition of a
compound to confirm the conservation of matter and the law of definite proportions.
[See SP 2.2, 6.1]
Essential knowledge 3.B.2: In a neutralization reaction, protons are

transferred from an acid to a base.
a. The amphoteric nature of water plays an important role in the chemistry of
aqueous solutions, since water can both accept protons from and donate protons
to dissolved species.
b. Acid-base reactions:
1. Only reactions in aqueous solutions are considered.
2. The Brnsted-Lowry concept of acids and bases is the focus of the course.
Lewis acid-base concepts are beyond the scope of this course and the AP Exam.
Rationale: The definition of Lewis acids is commonly taught in a first-year high
school chemistry course and is therefore considered prior knowledge. Note: The
formation of complex ions and the qualitative impact on solubility are both part of
the AP Chemistry course.
3. When an acid or base ionizes in water, the conjugate acid-base pairs can be
identified and their relative strengths compared.
LO 3.7 The student is able to identify compounds as Brnsted-Lowry acids, bases,
and/or conjugate acid-base pairs, using proton-transfer reactions to justify the
identification. [See SP 6.1]
Essential knowledge 3.B.3: In oxidation-reduction (redox) reactions, there

is a net transfer of electrons. The species that loses electrons is oxidized,
and the species that gains electrons is reduced.
a. In a redox reaction, electrons are transferred from the species that is oxidized to
the species that is reduced.

41
Language of reducing agent and oxidizing agent is beyond the scope of this course
and the AP Exam.
Rationale: Understanding this terminology is not necessary for reasoning about

redox chemistry.
b. Oxidation numbers may be assigned to each of the atoms in the reactant and
products; this is often an effective way to identify the oxidized and reduced species
in a redox reaction.
c. Balanced chemical equations for redox reactions can be constructed from
tabulated half-reactions.
d. Recognizing that a reaction is a redox reaction is an important skill; an apt
application of this type of reaction is a laboratory exercise where students perform
redox titrations.
e. There are a number of important redox reactions in energy production processes
(combustion of hydrocarbons and metabolism of sugars, fats, and proteins).
LO 3.8 The student is able to identify redox reactions and justify the identification in
terms of electron transfer. [See SP 6.1]
LO 3.9 The student is able to design and/or interpret the results of an experiment
involving a redox titration. [See SP 4.2, 5.1]
Enduring understanding 3.C: Chemical and physical

transformations may be observed in several ways and typically
involve a change in energy.
An important component of a full understanding of chemical change involves direct
observation of that change; thus, laboratory experiences are essential for the AP
Chemistry student to develop an appreciation of the discipline. At the AP course level,
observations are made on macroscopically large samples of chemicals; these observations
must be used to infer what is occurring at the particulate level. This ability to reason
about observations at one level (macroscopic) using models at another level (particulate)
provides an important demonstration of conceptual understanding and requires
extensive laboratory experience. The difference between physical and chemical change
is best explained at the particulate level. Laboratory observations of temperature change
accompanying physical and chemical transformations are manifestations of the energy
changes occurring at the particulate level. This has practical applications, such as energy
production via combustion of fuels (chemical energy conversion to thermal energy) and/
or batteries (chemical energy conversion to electrical energy).

42
Essential knowledge 3.C.1: Production of heat or light, formation of a

gas, and formation of a precipitate and/or a color change are possible
evidences that a chemical change has occurred.
a. Laboratory observations are made at the macroscopic level, so students must
be able to characterize changes in matter using visual clues and then make
representations or written descriptions.
b. Distinguishing the difference between chemical and physical changes at the
macroscopic level is a challenge; therefore, the ability to investigate chemical
properties is important.
c. In order to develop the ability to distinguish experimentally between chemical and
physical changes, students must make observations and collect data from a variety
of reactions and physical changes within the laboratory setting.
d. Classification of reactions provides important organizational clarity for chemistry;
therefore, students need to identify precipitation, acid-base, and redox reactions.
LO 3.10 The student is able to evaluate the classification of a process as
a physical change, chemical change, or ambiguous change based on both
macroscopic observations and the distinction between rearrangement of
covalent interactions and noncovalent interactions. [See SP 1.4, 6.1, connects to
5.D.2]
Essential knowledge 3.C.2: Net changes in energy for a chemical

reaction can be endothermic or exothermic.
a. Macroscopic observations of energy changes when chemicals react are made
possible by measuring temperature changes.
b. These observations should be placed within the context of the language of
exothermic and endothermic change.
c. The ability to translate observations made at the macroscopic level in the
laboratory to a conceptual framework is aided by a graphical depiction of the
process called an energy diagram, which provides a visual representation of the
exothermic or endothermic nature of a reaction.
d. It is important to be able to use an understanding of energy changes in chemical
reactions to identify the role of endothermic and exothermic reactions in realworld processes.

43

LO 3.11 The student is able to interpret observations regarding macroscopic
energy changes associated with a reaction or process to generate a relevant
symbolic and/or graphical representation of the energy changes. [See SP 1.5, 4.4]
Essential knowledge 3.C.3: Electrochemistry shows the interconversion

between chemical and electrical energy in galvanic and electrolytic
cells.
a. Electrochemistry encompasses the study of redox reactions that occur within
electrochemical cells. The reactions either generate electrical current in galvanic
cells, or are driven by an externally applied electrical potential in electrolytic cells.
Visual representations of galvanic and electrolytic cells are tools of analysis to
identify where half-reactions occur and the direction of current flow.
b. Oxidation occurs at the anode, and reduction occurs at the cathode for all
electrochemical cells.
Labeling an electrode as positive or negative is beyond the scope of this course and
the AP Exam.
Rationale: The sign on the electrode is different for electrochemical and electrolytic
cells, but the most important concept is that oxidation always takes place at
the anode in either cell type. Labeling electrodes does not provide a deeper
understanding of electrochemistry.
c. The overall electrical potential of galvanic cells can be calculated by identifying
the oxidation half-reaction and reduction half-reaction, and using a table of
Standard Reduction Potentials.
d. Many real systems do not operate at standard conditions and the electrical
potential determination must account for the effect of concentrations. The
qualitative effects of concentration on the cell potential can be understood by
considering the cell potential as a driving force toward equilibrium, in that the
farther the reaction is from equilibrium, the greater the magnitude of the cell
potential. The standard cell potential, Eo, corresponds to the standard conditions
of
. As the system approaches equilibrium, the magnitude (i.e., absolute
value) of the cell potential decreases, reaching zero at equilibrium (when
).
Deviations from standard conditions that take the cell further from equilibrium
than
will increase the magnitude of the cell potential relative to .
Deviations from standard conditions that take the cell closer to equilibrium
than
will decrease the magnitude of the cell potential relative to . In
concentration cells, the direction of spontaneous electron flow can be determined
by considering the direction needed to reach equilibrium.

44
The Nernst equation is beyond the scope of this course and the AP Exam.
Rationale: Qualitative reasoning about the effects of concentration on cell potential
is part of the course. However, inclusion of algorithmic calculations was not viewed
as the best way to deepen understanding of the big ideas.
e.
(standard Gibbs free energy) is proportional to the negative of the cell

potential for the redox reaction from which it is constructed.
f. Faradays laws can be used to determine the stoichiometry of the redox reactions
occurring in an electrochemical cell with respect to the following:
i. Number of electrons transferred
ii. Mass of material deposited or removed from an electrode
iii. Current
iv. Time elapsed
v. Charge of ionic species
LO 3.12 The student can make qualitative or quantitative predictions about
galvanic or electrolytic reactions based on half-cell reactions and potentials and/
or Faradays laws. [See SP 2.2, 2.3, 6.4]
LO 3.13 The student can analyze data regarding galvanic or electrolytic cells to
identify properties of the underlying redox reactions. [See SP 5.1]

45
Big Idea 4: Rates of chemical reactions are determined by

details of the molecular collisions.
Chemical changes occur over a wide range of time scales. Practically, the manner in
which the rate of change is observed is to measure changes in concentration of reactant or
product species as a function of time. There are a number of possible factors that influence
the observed speed of reaction at the macroscopic level, including the concentration
of reactants, the temperature, and other environmental factors. Measured rates for
reactions observed at the macroscopic level can generally be characterized mathematically
in an expression referred to as the rate law. In addition to these macroscopic-level
characterizations, the progress of reactions at the particulate level can be connected to the
rate law. Factors that influence the rate of reaction, including speeding of the reaction by
the use of a catalyst, can be delineated as well.
Enduring understanding 4.A: Reaction rates that depend on

temperature and other environmental factors are determined by
measuring changes in concentrations of reactants or products
over time.
The rate of a reaction is the rate at which reactants are converted to products, and is given
in terms of the change in concentrations with time. Rates of reactions span a wide range,
and generally increase with reactant concentrations and with temperature. The rate may
be measured by monitoring concentrations as a function of time, and the results of many
experiments may be summarized with a mathematical expression known as the rate law.
The rate law gives the dependence of the rate on reactant concentrations, and contains a
proportionality constant called the rate constant.
Essential knowledge 4.A.1: The rate of a reaction is influenced by the

concentration or pressure of reactants, the phase of the reactants and
products, and environmental factors such as temperature and solvent.
a. The rate of a reaction is measured by the amount of reactants converted to
products per unit of time.
b. A variety of means exist to experimentally measure the loss of reactants or
increase of products as a function of time. One important method involves the
spectroscopic determination of concentration through Beers law.
c. The rate of a reaction is influenced by reactant concentrations (except in zeroorder processes), temperature, surface area, and other environmental factors.

46

regarding the factors (i.e., temperature, concentration, surface area) that may
influence the rate of a reaction. [See SP 4.2, 5.1]
Essential knowledge 4.A.2: The rate law shows how the rate depends on
reactant concentrations.
a. The rate law expresses the rate of a reaction as proportional to the concentration
of each reactant raised to a power. The power of each reactant in the rate law is the
order of the reaction with respect to that reactant. The sum of the powers of the
reactant concentrations in the rate law is the overall order of the reaction. When
the rate is independent of the concentration of a reactant, the reaction is zeroth
order in that reactant, since raising the reactant concentration to the power zero is
equivalent to the reactant concentration being absent from the rate law.
b. In cases in which the concentration of any other reactants remain essentially
constant during the course of the reaction, the order of a reaction with respect to a
reactant concentration can be inferred from plots of the concentration of reactant
versus time. An appropriate laboratory experience would be for students to use
spectrophotometry to determine how concentration varies with time.
c. The method of initial rates is useful for developing conceptual understanding
of what a rate law represents, but simple algorithmic application should not be
considered mastery of the concept. Investigation of data for initial rates enables
prediction of how concentration will vary as the reaction progresses.
LO 4.2 The student is able to analyze concentration vs. time data to determine
the rate law for a zeroth-, first-, or second-order reaction.
[See SP 5.1, 6.4, connects to 4.A.3]
Essential knowledge 4.A.3: The magnitude and temperature dependence

of the rate of reaction is contained quantitatively in the rate constant.
a. The proportionality constant in the rate law is called the rate constant.
b. The rate constant is an important measurable quantity that characterizes a
chemical reaction.
c. Rate constants vary over many orders of magnitude because reaction rates vary
widely.
47
d. The temperature dependence of reaction rates is contained in the temperature

dependence of the rate constant.
e. For first-order reactions, half-life is often used as a representation for the rate
constant because they are inversely proportional, and the half-life is independent
of concentration. For example, radioactive decay processes provide real-world
context.
LO 4.3 The student is able to connect the half-life of a reaction to the rate
constant of a first-order reaction and justify the use of this relation in terms of
the reaction being a first-order reaction. [See SP 2.1, 2.2]
Enduring understanding 4.B: Elementary reactions are mediated

by collisions between molecules. Only collisions having sufficient
energy and proper relative orientation of reactants lead to
products.
Reactions proceed through elementary steps involving one or more reactants. In a
unimolecular reaction, collisions with other molecules activate the reactant such that it
is converted into product. In bimolecular and higher-order reactions, collisions between
reactants lead to formation of products, provided both the energy of the collision and
the relative orientation of reactants are favorable for reaction. A successful collision can
be viewed as proceeding along some single reaction coordinate. The energy profile along
this reaction coordinate provides a useful construct for reasoning about the connection
between the energetics of a reaction and the rate of the reaction. In particular, this profile
includes the activation energy required to overcome the energy barrier between reactants
and products.
Essential knowledge 4.B.1: Elementary reactions can be unimolecular or

involve collisions between two or more molecules.
a. The order of an elementary reaction can be inferred from the number of molecules
participating in a collision: unimolecular reactions are first order, reactions
involving bimolecular collisions are second order, etc.
b. Elementary reactions involving the simultaneous collision of three particles are
rare.

48

LO 4.4 The student is able to connect the rate law for an elementary reaction
to the frequency and success of molecular collisions, including connecting the
frequency and success to the order and rate constant, respectively.
[See SP 7.1, connects to 4.A.3, 4.B.2]
Essential knowledge 4.B.2: Not all collisions are successful. To get

over the activation energy barrier, the colliding species need sufficient
energy. Also, the orientations of the reactant molecules during the
collision must allow for the rearrangement of reactant bonds to form
product bonds.
a. Unimolecular reactions occur because collisions with solvent or background
molecules activate the molecule in a way that can be understood in terms of a
Maxwell-Boltzmann thermal distribution of particle energies.
b. Collision models provide a qualitative explanation for order of elementary
reactions and the temperature dependence of the rate constant.
c. In most reactions, only a small fraction of the collisions leads to a reaction.
Successful collisions have both sufficient energy to overcome activation energy
barriers and orientations that allow the bonds to rearrange in the required
manner.
d. The Maxwell-Boltzmann distribution describes the distribution of particle
energies; this distribution can be used to gain a qualitative estimate of the fraction
of collisions with sufficient energy to lead to a reaction, and also how that fraction
depends on temperature.
Learning Objective EK 4.B.2:
LO 4.5 The student is able to explain the difference between collisions that
convert reactants to products and those that do not in terms of energy
distributions and molecular orientation. [See SP 6.2]
Essential knowledge 4.B.3: A successful collision can be viewed as

following a reaction path with an associated energy profile.
a. Elementary reactions typically involve the breaking of some bonds and the
forming of new ones. It is usually possible to view the complex set of motions
involved in this rearrangement as occurring along a single reaction coordinate.

49
b. The energy profile gives the energy along this path, which typically proceeds from
reactants, through a transition state, to products.
c. The Arrhenius equation can be used to summarize experiments on the
temperature dependence of the rate of an elementary reaction and to interpret this
dependence in terms of the activation energy needed to reach the transition state.
Calculations involving the Arrhenius equation are beyond the scope of this course
and the AP Exam.
Rationale: The conceptual aspects of the Arrhenius equation and the interpretation
of graphs is part of the course. However, inclusion of algorithmic calculations was
not viewed as the best way to deepen understanding of the big ideas.
Learning Objective for for EK 4.B.3:
LO 4.6 The student is able to use representations of the energy profile for an
elementary reaction (from the reactants, through the transition state, to the
products) to make qualitative predictions regarding the relative temperature
dependence of the reaction rate. [See SP 1.4, 6.4]
Enduring understanding 4.C: Many reactions proceed via a series

of elementary reactions.
Many reactions proceed through a series of elementary reactions or steps, and this series
of steps is referred to as the reaction mechanism. The steps of the mechanism sum to
give the overall reaction; the balanced chemical equation for the overall reaction specifies
the stoichiometry. The overall rate of the reaction is an emergent property of the rates of
the individual reaction steps. For many reactions, one step in the reaction mechanism is
sufficiently slow so that it limits the rate of the overall reaction. For such reactions, this
rate-limiting step sets the rate of the overall reaction. Reaction intermediates, which are
formed by a step in the reaction mechanism and then consumed by a following step, play
an important role in multistep reactions, and their experimental detection is an important
means of investigating reaction mechanisms.
Learning Objective for EU 4C:

LO 4.7 The student is able to evaluate alternative explanations, as expressed by
reaction mechanisms, to determine which are consistent with data regarding
the overall rate of a reaction, and data that can be used to infer the presence of a
reaction intermediate. [See SP 6.5, connects to 4.C.1, 4.C.2, 4.C.3]

50
Essential knowledge 4.C.1: The mechanism of a multistep reaction

consists of a series of elementary reactions that add up to the overall
reaction.
a. The rate law of an elementary step is related to the number of reactants, as
accounted for by collision theory.
b. The elementary steps add to give the overall reaction. The balanced chemical
equation for the overall reaction specifies only the stoichiometry of the reaction,
not the rate.
c. A number of mechanisms may be postulated for most reactions, and
experimentally determining the dominant pathway of such reactions is a central
activity of chemistry.
Essential knowledge 4.C.2: In many reactions, the rate is set by the

slowest elementary reaction, or rate-limiting step.
a. For reactions in which each elementary step is irreversible, the rate of the reaction
is set by the slowest elementary step (i.e., the rate-limiting step).
Essential knowledge 4.C.3: Reaction intermediates, which are formed

during the reaction but not present in the overall reaction, play an
important role in multistep reactions.
a. A reaction intermediate is produced by some elementary steps and consumed by
others, such that it is present only while a reaction is occurring.
b. Experimental detection of a reaction intermediate is a common way to build
evidence in support of one reaction mechanism over an alternative mechanism.
Collection of data pertaining to 4.C.3b is beyond the scope of this course and the AP
Exam.
Rationale: Designing an experiment to identify reaction intermediates often

requires knowledge that is beyond the scope of a general chemistry course.
Enduring understanding 4.D: Reaction rates may be increased by

the presence of a catalyst.
Catalysts, such as enzymes in biological systems and the surfaces in an automobiles
catalytic converter, increase the rate of a chemical reaction. Catalysts may function by
lowering the activation energy of an elementary step in a reaction, thereby increasing
the rate of that elementary step, but leaving the mechanism of the reaction otherwise
unchanged. Other catalysts participate in the formation of a new reaction intermediate,
thereby providing a new reaction mechanism that provides a faster pathway between
reactants and products.

51
Essential knowledge 4.D.1: Catalysts function by lowering the activation

energy of an elementary step in a reaction mechanism, and by providing
a new and faster reaction mechanism.
a. A catalyst can stabilize a transition state, lowering the activation energy and thus
increasing the rate of a reaction.
b. A catalyst can increase a reaction rate by participating in the formation of a new
reaction intermediate, thereby providing a new reaction pathway or mechanism.
LO 4.8 The student can translate among reaction energy profile representations,
particulate representations, and symbolic representations (chemical equations)
of a chemical reaction occurring in the presence and absence of a catalyst.
[See SP 1.5]
Essential knowledge 4.D.2: Important classes in catalysis include acidbase catalysis, surface catalysis, and enzyme catalysis.
a. In acid-base catalysis, a reactant either gains or loses a proton; this changes the
rate of the reaction.
b. In surface catalysis, either a new reaction intermediate is formed, or the
probability of successful collisions is modified.
c. Some enzymes accelerate reactions by binding to the reactants in a way that lowers
the activation energy. Other enzymes react with reactant species to form a new
reaction intermediate.
LO 4.9 The student is able to explain changes in reaction rates arising from
the use of acid-base catalysts, surface catalysts, or enzyme catalysts, including
selecting appropriate mechanisms with or without the catalyst present.
[See SP 6.2, 7.2]

52
Big Idea 5: The laws of thermodynamics describe the

essential role of energy and explain and predict the
direction of changes in matter.
All changes in matter involve some form of energy change. Thus, the availability
or disposition of energy plays a role in virtually all observed chemical processes.
Thermodynamics provides a number of tools for understanding this key role, particularly
the conservation of energy, including energy transfer in the forms of heat and work.
Chemical bonding is central to chemistry, so one key concept associated with energy is that
the breaking of a chemical bond inherently requires an energy input, and because bond
formation is the reverse process, it will release energy. One key determinant of chemical
transformations is the change in potential energy that results from changes in electrostatic
forces. In addition to the transfer of energy, the thermodynamic concept of entropy is an
important component in determining the direction of chemical or physical change.
Learning Objective for Big Idea 5:

LO 5.1 The student is able to create or use graphical representations in order
to connect the dependence of potential energy to the distance between atoms
and factors, such as bond order (for covalent interactions) and polarity (for
intermolecular interactions), which influence the interaction strength.
[See SP 1.1, 1.4, 7.2, connects to Big Idea 2]
Note: This learning objective applies to essential knowledge components of
5A5E.
Enduring understanding 5.A: Two systems with different

temperatures that are in thermal contact will exchange energy.
The quantity of thermal energy transferred from one system to
another is called heat.
The particles in chemical systems are continually undergoing random motion. The
temperature of a system is a direct measure of the average kinetic energy associated with
this random motion. When chemical systems that have different temperatures are placed
in thermal contact, kinetic energy is transferred from the hotter object to the cooler object
until the temperatures become equal. This transfer of kinetic energy is referred to in this
course as heat transfer. An understanding of heat as the transfer of energy between a
system at higher temperature and a system at lower temperature is fundamental. Many
practical applications exist, such as weather prediction, design of heating and cooling
systems, and regulation of the rates of chemical reactions.

53
Essential knowledge 5.A.1: Temperature is a measure of the average

kinetic energy of atoms and molecules.
a. All of the molecules in a sample are in motion.
b. The Kelvin temperature of a sample of matter is proportional to the average
kinetic energy of the particles in the sample. When the average kinetic energy
of the particles in the sample doubles, the Kelvin temperature is doubled. As the
temperature approaches
(zero Kelvin), the average kinetic energy of a system
approaches a minimum near zero.
c. The Maxwell-Boltzmann distribution shows that the distribution of kinetic
energies becomes greater (more disperse) as temperature increases.
LO 5.2 The student is able to relate temperature to the motions of particles,
either via particulate representations, such as drawings of particles with arrows
indicating velocities, and/or via representations of average kinetic energy and
distribution of kinetic energies of the particles, such as plots of the MaxwellBoltzmann distribution. [See SP 1.1, 1.4, 7.1]
Essential knowledge 5.A.2: The process of kinetic energy transfer at the

particulate scale is referred to in this course as heat transfer, and the
spontaneous direction of the transfer is always from a hot to a cold body.
a. On average, molecules in the warmer body have more kinetic energy than the
molecules in the cooler body.
b. Collisions of molecules that are in thermal contact transfer energy.
c. Scientists describe this process as energy is transferred as heat.
d. Eventually, thermal equilibrium is reached as the molecular collisions continue.
The average kinetic energy of both substances is the same at thermal equilibrium.
e. Heat is not a substance, i.e., it makes no sense to say that an object contains a
certain amount of heat. Rather, heat exchange or transfer of energy as heat
refers to the process in which energy is transferred from a hot to a cold body in
thermal contact.
f. The transfer of a given amount of thermal energy will not produce the same
temperature change in equal masses of matter with differing specific heat
capacities.

54

LO 5.3 The student can generate explanations or make predictions about the
transfer of thermal energy between systems based on this transfer being due to a
kinetic energy transfer between systems arising from molecular collisions.
[See SP 7.1]
Enduring understanding 5.B: Energy is neither created nor

destroyed, but only transformed from one form to another.
The conservation of energy plays an important role in reasoning about the transfer of
energy in chemical systems. A molecular system has energy that is a function of its
current state. The energy of a system changes when the state of the system changes; for
instance, when the temperature of the system changes, when a substance melts or boils,
or when a chemical reaction occurs, the energy changes. Conservation of energy implies
that any change in the energy of a system must be balanced by the transfer of energy
either into or out of the system. This energy transfer can take the form of either heat
transfer or work. Work includes all forms of energy transfer other than heat transfer.
Examples of mechanical work include the expansion of a gas against a piston in engines.
The change in energy associated with a chemical process is an important aspect of such
processes characterizing, for instance, the amount of energy that can be obtained from a
fuel system. Because the change in energy associated with a given process is proportional
to the amount of substance undergoing that process, this change is best described on a per
mole (or per gram) basis, as in heat capacities (for heating/cooling), enthalpies of fusion
or vaporization (for physical transformations), and enthalpies of reaction (for chemical
transformations). Calorimetry provides a convenient means to measure changes in energy,
and thus is used experimentally to determine heat capacities or enthalpies of physical and
chemical transformations.
Essential knowledge 5.B.1: Energy is transferred between systems either

through heat transfer or through one system doing work on the other
system.
a. Heating a cold body with a hot body is a form of energy transfer between
two systems. The transfer of thermal energy is an important concept in
thermodynamics.
b. An additional form of energy transfer is through work. Work is described by other
scientific frameworks, such as Newtonian Mechanics or electromagnetism.
c. In this course, calculations involving work are limited to that associated with
changes in volume of a gas. An example of the transfer of energy between systems
through work is the expansion of gas in a steam engine or car piston. Reasoning
about this energy transfer can be based on molecular collisions with the piston:

55
The gas is doing work on the piston, and energy is transferred from the gas to the
piston.
Essential knowledge 5.B.2: When two systems are in contact with

each other and are otherwise isolated, the energy that comes out of
one system is equal to the energy that goes into the other system. The
combined energy of the two systems remains fixed. Energy transfer can
occur through either heat exchange or work.
a. When energy is transferred from system 1 to system 2, the energy transferred
from system 1 is equal in magnitude to the energy transferred to system 2.
b. If a system transfers energy to another system, its energy must decrease. Likewise,
if energy is transferred into a system, its energy must increase.
Learning Objectives for EK 5.B.1 and 5.B.2:
LO 5.4 The student is able to use conservation of energy to relate the magnitudes
of the energy changes occurring in two or more interacting systems, including
identification of the systems, the type (heat versus work), or the direction of
energy flow. [See SP 1.4, 2.2, connects to 5.B.1, 5.B.2]
LO 5.5 The student is able to use conservation of energy to relate the magnitudes
of the energy changes when two nonreacting substances are mixed or brought
into contact with one another. [See SP 2.2, connects to 5.B.1, 5.B.2]
Essential knowledge 5.B.3: Chemical systems undergo three main

processes that change their energy: heating/cooling, phase transitions,
and chemical reactions.
a. Heating a system increases the energy of the system, while cooling a system
decreases the energy. A liter of water at
has more energy than a liter of water
at
.
b. The amount of energy needed to heat one gram of a substance by
specific heat capacity of that substance.
is the
c. Energy must be transferred to a system to cause it to melt (or boil). The energy of
the system therefore increases as the system undergoes a solid-liquid (or liquidgas) phase transition. Likewise, a system gives off energy when it freezes (or
condenses). The energy of the system decreases as the system undergoes a liquidsolid (or gas-liquid) phase transition.
d. The amount of energy needed to vaporize one mole of a pure substance is the
molar enthalpy of vaporization, and the energy released in condensation has an
equal magnitude. The molar enthalpy of fusion is the energy absorbed when one
56
mole of a pure solid melts or changes from the solid to liquid state and the energy
released when the liquid solidifies has an equal magnitude.
e. When a chemical reaction occurs, the energy of the system decreases (exothermic
reaction), increases (endothermic reaction), or remains the same. For exothermic
reactions, the energy lost by the reacting molecules (system) is gained by the
surroundings. The energy is transferred to the surroundings by either heat or
work. Likewise, for endothermic reactions, the system gains energy from the
surroundings by heat transfer or work done on the system.
f. The enthalpy change of reaction gives the amount of energy released (for negative
values) or absorbed (for positive values) by a chemical reaction at constant
pressure.
LO 5.6 The student is able to use calculations or estimations to relate energy
changes associated with heating/cooling a substance to the heat capacity, relate
energy changes associated with a phase transition to the enthalpy of fusion/
vaporization, relate energy changes associated with a chemical reaction to the
enthalpy of the reaction, and relate energy changes to
work.
[See SP 2.2, 2.3]
Essential knowledge 5.B.4: Calorimetry is an experimental technique

that is used to determine the heat exchanged/transferred in a chemical
system.
a. The experimental setup for calorimetry is the following: A chemical system is put
in thermal contact with a heat bath. The heat bath is a substance, such as water,
whose heat capacity has been well established by previous experiments. A process
is initiated in the chemical system (heating/cooling, phase transition, or chemical
reaction), and the change in temperature of the heat bath is determined.
b. Because the heat capacity of the heat bath is known, the observed change in
temperature can be used to determine the amount of energy exchanged between
the system and the heat bath.
c. The energy exchanged between the system and the heat bath is equal in magnitude
to the change in energy of the system. If the heat bath increased in temperature,
its energy increased, and the energy of the system decreased by this amount. If the
heat bath decreased in temperature, and therefore energy, the energy of the system
increased by this amount.
d. Because calorimetry measures the change in energy of a system, it can be used
to determine the heat associated with each of the processes listed in 5.B.3. In
57
this manner, calorimetry may be used to determine heat capacities, enthalpies

of vaporization, enthalpies of fusion, and enthalpies of reactions. Only constant
pressure calorimetry is required in the course.
in which calorimetry is used to determine the change in enthalpy of a chemical
process (heating/cooling, phase transition, or chemical reaction) at constant
pressure. [See SP 4.2, 5.1, 6.4]
Enduring understanding 5.C: Breaking bonds requires energy,

and making bonds releases energy.
Chemical bonds arise from attractive interactions between negatively charged electrons
and the positively charged nuclei of the atoms that make up the bond. As electrons
approach a positive charge, the potential energy of a system is lowered. Therefore, having
electrons shared between atoms results in the system being in a lower energy state, which
can only happen if energy is somehow released. Thus, making chemical bonds releases
energy. The converse is true for the opposing process. In order to break a chemical
bond, energy must be put into the system to overcome the attractive interaction between
the shared electrons and the nuclei of the bonded atoms. When considering chemical
reactions, however, it is important to recognize that in most cases both bond breaking
and bond formation occurs. The overall energy change is determinable from looking
at all the energy inputs (to break bonds) and the energy outputs (from the formation
of bonds). There are several ways to calculate energy changes for reactions, including
traditionally used methods involving enthalpy of formation. One compelling conceptual
model for this calculation is to use average bond energies or enthalpies to determine the
energy change of a reaction. Many practical examples of chemistry take place in solvents
(often water); thus, the determination of overall changes in energy for a reaction must
include consideration of any solvent interactions with reactants and products. Energy may
appear in different forms, such as potential energy or kinetic energy. In chemical systems,
the stored energy is called chemical energy, and the energy of motion (translational,
rotational, or vibrational) is called thermal energy. Chemical energy is the potential
energy associated with chemical systems. The amount of chemical energy in a system
changes when the chemicals are allowed to react. The energy transferred to or from
the surroundings when a chemical system undergoes a reaction is often in the form of
thermal energy.

58
Essential knowledge 5.C.1: Potential energy is associated with a

particular geometric arrangement of atoms or ions and the electrostatic
interactions between them.
a. The attraction between the electrons of one atom and the protons of another
explains the tendency for the atoms to approach one another. The repulsion
between the nuclei (or core electrons) explains why the atoms repel one another
at close distance. The distance at which the energy of interaction is minimized
is called the bond length, and the atoms vibrate about this minimum energy
position.
b. A graph of energy versus the distance between atoms can be plotted and
interpreted. Using this graph, it is possible to identify bond length and bond
energy.
c. Conceptually, bond making and bond breaking are opposing processes that have
the same magnitude of energy associated with them. Thus, convention becomes
important, so we define the bond energy as the energy required to break a bond.
d. Because chemical bonding arises from electrostatic interaction between electrons
and nuclei, larger charges tend to lead to larger strengths of interaction. Thus,
triple bonds are stronger than double or single bonds because they share more
pairs of electrons.
e. Stronger bonds tend to be shorter bonds.
Essential knowledge 5.C.2: The net energy change during a reaction

is the sum of the energy required to break the bonds in the reactant
molecules and the energy released in forming the bonds of the product
molecules. The net change in energy may be positive for endothermic
reactions where energy is required, or negative for exothermic reactions
where energy is released.
a. During a chemical reaction, bonds are broken and/or formed, and these events
change the potential energy of the reaction system.
b. The average energy required to break all of the bonds in the reactant molecules
can be estimated by adding up the average bond energies or bond enthalpies for
all the bonds in the reactant molecules. Likewise, the average energy released
in forming the bonds in the products can be estimated. If the energy released is
greater than the energy required, then the reaction is exothermic. If the energy
required is greater than the energy released, then the reaction is endothermic.
c. For an exothermic reaction, the products are at a lower potential energy compared
with the reactants. For an endothermic reaction, the products are at a higher
potential energy than the reactants.
d. In an isolated system, energy is conserved. Thus, if the potential energy of
the products is lower than that of the reactants, then the kinetic energy of the
59
products must be higher. For an exothermic reaction, the products are at a higher
kinetic energy. This means that they are at a higher temperature. Likewise, for an
endothermic reaction, the products are at a lower kinetic energy and, thus, at a
lower temperature.
e. Because the products of a reaction are at a higher or lower temperature than their
surroundings, the products of the reaction move toward thermal equilibrium with
the surroundings. Thermal energy is transferred to the surroundings from the
hot products in an exothermic reaction. Thermal energy is transferred from the
surroundings to the cold products in an endothermic reaction.
f. Although the concept of state functions is not required for the course, students
should understand these Hesss law ideas: When a reaction is reversed, the sign of
the enthalpy of the reaction is changed; when two (or more) reactions are summed
to obtain an overall reaction, the enthalpies of reaction are summed to obtain the
net enthalpy of reaction.
g. Tables of standard enthalpies of formation can be used to calculate the standard
enthalpy of reactions. Uses should go beyond algorithmic calculations and include,
for instance, the use of such tables to compare related reactions, such as extraction
of elemental metals from metal oxides.
Learning Objective for 5.C.2:
LO 5.8 The student is able to draw qualitative and quantitative connections
between the reaction enthalpy and the energies involved in the breaking and
formation of chemical bonds. [See SP 2.3, 7.1, 7.2]
Enduring understanding 5.D: Electrostatic forces exist between

molecules as well as between atoms or ions, and breaking the
resultant intermolecular interactions requires energy.
The same essential interaction that forms chemical bonds, electrostatic attraction, also
explains the attractive forces as non-bonded atoms draw near each other. When atoms
approach each other, there is always an electrostatic attraction between the positive
charges of the nucleus in each atom and the electrons of the approaching atom. When a
chemical bond does not form between the two atoms, this attraction is described as an
intermolecular force. For molecular systems, these intermolecular forces are understood
in terms of charge distributions leading to dipoles (permanent or induced) that then
attract each other. The most common categories for these interactions are (a) dipoledipole, (b) dipole-induced dipole, and (c) induced dipole-induced dipole (dispersion)
forces. Hydrogen bonding is an important, specialized form of dipole-dipole interactions.
These forces may occur (a) between small molecules, (b) between different large

60
molecules, or (c) between different regions of the same large molecule. The distinction
at the particulate level between electrostatic interactions of nonbonded atoms and those
of chemically bonded atoms provides the cleanest distinction between a chemical and
physical process. A physical process generally involves nonbonded interactions, and a
chemical process involves breaking and/or forming covalent bonds. In many systems
involving large molecules (both biochemical systems and synthetic polymer systems), the
nonbonded interactions play important roles in the observed functions of the systems.
Essential knowledge 5.D.1: Potential energy is associated with the

interaction of molecules; as molecules draw near each other, they
experience an attractive force.
a. Chemists categorize intermolecular forces in terms of the nature of the charge
distributions in the molecules involved. Thus, dipole-dipole, dipole-induced
dipole, and induced dipole-induced dipole (dispersion) can be defined.
b. All substances will manifest dispersion forces, and these forces tend to be larger
when the molecules involved have more electrons or have a larger surface area.
c. Hydrogen bonding is a relatively strong type of intermolecular interaction
that occurs when hydrogen atoms that are covalently bonded to the highly
electronegative atoms (N, O, and F) are also attracted to the negative end of a
dipole formed by the electronegative atom (N, O, and F) in a different molecule,
or a different part of the same molecule. When hydrogen bonding is present, even
small molecules may have strong intermolecular attractions.
Learning Objective for 5.D.1:
LO 5.9 The student is able to make claims and/or predictions regarding relative
magnitudes of the forces acting within collections of interacting molecules
based on the distribution of electrons within the molecules and the types of
intermolecular forces through which the molecules interact. [See SP 6.4]
Essential knowledge 5.D.2: At the particulate scale, chemical processes

can be distinguished from physical processes because chemical bonds
can be distinguished from intermolecular interactions.
a. The distinction between chemical and physical processes relates to the nature of
the change in molecular interactions. Processes that involve the breaking and/or
formation of chemical bonds are classified as chemical processes. Processes that
involve only changes in weak intermolecular interactions, such as phase changes,
are classified as physical processes.

61
b. A gray area exists between these two extremes. For instance, the dissolution of a
salt in water involves breaking of ionic bonds and the formation of interactions
between ions and solvent. The magnitude of these interactions can be comparable
to covalent bond strengths, and so plausible arguments can be made for classifying
dissolution of a salt as either a physical or chemical process.
LO 5.10 The student can support the claim about whether a process is a chemical
or physical change (or may be classified as both) based on whether the process
involves changes in intramolecular versus intermolecular interactions.
[See SP 5.1]
Essential knowledge 5.D.3: Noncovalent and intermolecular interactions

play important roles in many biological and polymer systems.
a. In large biomolecules, noncovalent interactions may occur between different
molecules or between different regions of the same large biomolecule.
b. The functionality and properties of molecules depend strongly on the shape of
the molecule, which is largely dictated by noncovalent interactions. For example,
the function of enzymes is dictated by their structure, and properties of synthetic
polymers are modified by manipulating their chemical composition and structure.
LO 5.11 The student is able to identify the noncovalent interactions within and
between large molecules, and/or connect the shape and function of the large
molecule to the presence and magnitude of these interactions. [See SP 7.2]
Enduring understanding 5.E: Chemical or physical processes are

driven by a decrease in enthalpy or an increase in entropy, or
both.
One of the most powerful applications of thermodynamic principles is the ability to
determine whether a process corresponding to a physical or chemical change will lie
toward the reactant or product side when the process reaches a steady equilibrium
state. The standard change in Gibbs free energy,
, is used to make this
determination. If
, then products are favored at equilibrium, and the forward
process is considered to be thermodynamically favored. Conversely, if
,
then reactants are favored at equilibrium, and the reverse process is considered to be
thermodynamically favored. Both the enthalpy change
and the entropy change
62
are closely related to the structure and nature of the components of the system;
for this reason, it is often possible to make qualitative determinations concerning the
sign (and magnitude) of
without explicit calculation. Enthalpy changes are closely
related to the relative bond energies (and relative strengths of intermolecular interactions)
of the reactants and products; entropy changes are generally related to the states of
the components and the number of individual particles present. In this way, the Gibbs
free energy provides a framework based on molecular structure and intermolecular
interactions for understanding why some chemical reactions are observed to proceed to
near completion, while others reach equilibrium with almost no products being formed.
Some processes that are not thermodynamically favored (for example, the recharging of a
battery) can be driven to occur through the application of energy from an external source
in this case, an electrical current. Importantly, in biochemical systems, some reactions
that oppose the thermodynamically favored direction are driven by coupled reactions.
Thus, a cell can use energy to create order (a direction that is not thermodynamically
favored) via coupling with thermodynamically favored reactions. For example, many
biochemical syntheses are coupled to the reaction in which ATP is converted to
phosphate.
In some cases, processes that are thermodynamically favored are not observed to occur
because of some kinetic constraint; quite often there is a high activation energy to
overcome in order for the process to proceed. Thus, although Gibbs free energy can be
used to determine which direction of a chemical process is thermodynamically favored, it
provides no information about the rate of the process, or the nature of the process on the
microscopic scale.
Essential knowledge 5.E.1: Entropy is a measure of the dispersal of

matter and energy.
a. Entropy may be understood in qualitative terms rather than formal statistical
terms. Although this is not the most rigorous approach to entropy, the use of
qualitative reasoning emphasizes that the goal is for students to be able to make
predictions about the direction of entropy change,
, for many typical chemical
and physical processes.
b. Entropy increases when matter is dispersed. The phase change from solid to
liquid, or from liquid to gas, results in a dispersal of matter in the sense that the
individual particles become more free to move, and generally occupy a larger
volume. Another way in which entropy increases in this context is when the
number of individual particles increases when a chemical reaction precedes
whose stoichiometry results in a larger number of product species than reacting
species. Also, for a gas, the entropy increases when there is an increase in volume
(at constant temperature), and the gas molecules are able to move within a larger
space.

63
c. Entropy increases when energy is dispersed. From KMT, we know that the
distribution of kinetic energy among the particles of a gas broadens as the
temperature increases. This is an increase in the dispersal of energy, as the total
kinetic energy of the system becomes spread more broadly among all of the gas
molecules. Thus, as temperature increases, the entropy increases.
LO 5.12 The student is able to use representations and models to predict the
sign and relative magnitude of the entropy change associated with chemical or
physical processes. [See SP 1.4]
Essential knowledge 5.E.2: Some physical or chemical processes involve

both a decrease in the internal energy of the components
under consideration and an increase in the entropy of those components
. These processes are necessarily thermodynamically favored
.
a. For the purposes of thermodynamic analysis in this course, the enthalpy and the
internal energy will not be distinguished.
b. The phrase thermodynamically favored means that products are favored at
equilibrium
.
c. Historically, the term spontaneous has been used to describe processes for
which
. The phrase thermodynamically favored is used here to avoid
misunderstanding and confusion that can occur because of the common
connotation of the term spontaneous, which students may believe means
immediately or without cause.
d. For many processes, students will be able to determine, either quantitatively or
qualitatively, the signs of both
and
for a physical or chemical process. In
those cases where
and
, there is no need to calculate
in order
to determine that the process is thermodynamically favored.
e. As noted below in 5.E.5, the fact that a process is thermodynamically favored does
not mean that it will proceed at a measurable rate.
f. Any process in which both
and
are not thermodynamically
favored,
and the process must favor reactants at equilibrium
.
Because the signs of
and
reverse when a chemical or physical process is
reversed, this must be the case.

64

LO 5.13 The student is able to predict whether or not a physical or chemical
process is thermodynamically favored by determination of (either quantitatively
or qualitatively) the signs of both
and
, and calculation or estimation of
when needed. [See SP 2.2, 2.3, 6.4, connects to 5.E.3]
Essential knowledge 5.E.3: If a chemical or physical process is not

driven by both entropy and enthalpy changes, then the Gibbs free
energy change can be used to determine whether the process is
thermodynamically favored.
a. Some exothermic reactions involve decreases in entropy.
b. When
, the process is not thermodynamically favorable. When
the process is thermodynamically favorable.
c. In some reactions, it is necessary to consider both enthalpy and entropy to

determine if a reaction will be thermodynamically favorable. The freezing of water
and the dissolution of sodium nitrate in water provide good examples of such
situations.
LO 5.14 The student is able to determine whether a chemical or physical process
is thermodynamically favorable by calculating the change in standard Gibbs free
energy. [See SP 2.2, connects to 5.E.2]
Essential knowledge 5.E.4: External sources of energy can be used to

drive change in cases where the Gibbs free energy change is positive.
a. Electricity may be used to cause a process to occur that is not thermodynamically
favored. Useful examples are charging of a battery and the process of electrolysis.
b. Light may also be a source of energy for driving a process that in isolation is not
thermodynamically favored. Useful examples are as follows:
1. The photoionization of an atom, because although the separation of a
negatively charged electron from the remaining positively charged ion is
highly endothermic, ionization is observed to occur in conjunction with the
absorption of a photon.
2. The overall conversion of carbon dioxide to glucose through photosynthesis, for
which
has
,
65
yet is observed to occur through a multistep process that is initiated by the

absorption of several photons in the range of
.
c. A thermodynamically unfavorable reaction may be made favorable by coupling
it to a favorable reaction, such as the conversion of ATP to ADP in biological
systems. In this context, coupling means the process involves a series of reactions
with common intermediates, such that the reactions add up to produce an overall
reaction with a negative
.
Learning Objectives for EK 5.E.4:
LO 5.15 The student is able to explain how the application of external energy
sources or the coupling of favorable with unfavorable reactions can be used to
cause processes that are not thermodynamically favorable to become favorable.
[See SP 6.2]
LO 5.16 The student can use Le Chateliers principle to make qualitative
predictions for systems in which coupled reactions that share a common
intermediate drive formation of a product. [See SP 6.4, connects to 6.B.1]
LO 5.17 The student can make quantitative predictions for systems involving
coupled reactions that share a common intermediate, based on the equilibrium
constant for the combined reaction. [See SP 6.4, connects to 6.A.2]
Essential knowledge 5.E.5: A thermodynamically favored process may

not occur due to kinetic constraints (kinetic vs. thermodynamic control).
a. Many processes that are thermodynamically favored do not occur to any
measurable extent, or they occur at extremely slow rates.
b. Processes that are thermodynamically favored, but do not proceed at a measurable
rate, are said to be under kinetic control. High activation energy is a common
reason for a process to be under kinetic control. The fact that a process does
not proceed at a noticeable rate does not mean that the chemical system is at
equilibrium. If a process is known to be thermodynamically favored (through
qualitative and/or quantitative analysis of
and
), and yet it is not
occurring at a measurable rate, then the conclusion is that the process is under
kinetic control.

66

LO 5.18 The student can explain why a thermodynamically favored chemical
reaction may not produce large amounts of product (based on consideration
of both initial conditions and kinetic effects), or why a thermodynamically
unfavored chemical reaction can produce large amounts of product for certain
sets of initial conditions. [See SP 1.3, 7.2, connects to 6.D.1]

67
Big Idea 6: Any bond or intermolecular attraction that can

be formed can be broken. These two processes are in a
dynamic competition, sensitive to initial conditions and
external perturbations.
Many processes in nature, including large numbers of chemical reactions, are reversible,
i.e., these processes can proceed in either direction. Chemical reactions can be reversible
at the atomic or molecular level. When opposing processes occur at the same rate, a stable
but dynamic state called equilibrium is established. The expression for the equilibrium
constant, K, is a mathematical expression that describes the equilibrium state associated
with a chemical change. An analogous expression for the reaction quotient, Q, describes
a chemical reaction at any point, enabling comparison to the equilibrium state. A wide
range of equilibrium constants is possible; of particular significance are those that arise
from acid-base chemistry, particularly as embodied in biochemical systems where the
value of K is such that significant amounts of both reactants and products are present.
Equilibrium states can be perturbed in a variety of ways, and the response to such a
perturbation is predictable.
Enduring understanding 6.A: Chemical equilibrium is a dynamic,

reversible state in which rates of opposing processes are equal.
A collection of molecules undergoing a reversible reaction can adopt a number of
configurations that are constrained by the stoichiometry and that can be ordered by the
extent to which the reactants have been converted to products. As reactants are converted
to products, the reactant concentrations drop; thus, the rate of the forward reaction
decreases. Simultaneously, the product concentrations increase and the rate of the reverse
reaction increases. At some intermediate point, the concentrations of reactants and
products are such that the rates of the forward and reverse reactions balance, and there is
no net conversion between reactants and products. A system that has reached this state is
at chemical equilibrium. The relative proportions of reactants and products at equilibrium
is specified by the equilibrium constant, K, which may be used both quantitatively (to
predict concentrations at equilibrium) and qualitatively (to reason about the relative
amounts of reactants and products present at equilibrium).
Essential knowledge 6.A.1: In many classes of reactions, it is important

to consider both the forward and reverse reaction.
a. Many readily observable processes are reversible. Examples include evaporating
and condensing water, absorption of a gas, or dissolving and precipitating a salt.
Relevant and interesting contexts include biological examples (binding of oxygen
to hemoglobin and the attachment of molecules to receptor sites in the nose) and
environmental examples (transfer of carbon between atmosphere and biosphere
and transfer of dissolved substances between atmosphere and hydrosphere).

68
b. Dissolution of a solid, transfer of protons in acid-base reactions, and transfer of

electrons in redox reactions are important examples of reversible reactions.
LO 6.1 The student is able to, given a set of experimental observations regarding
physical, chemical, biological, or environmental processes that are reversible,
construct an explanation that connects the observations to the reversibility of the
underlying chemical reactions or processes. [See SP 6.2]
Essential knowledge 6.A.2: The current state of a system undergoing a

reversible reaction can be characterized by the extent to which reactants
have been converted to products. The relative quantities of reaction
components are quantitatively described by the reaction quotient, Q.
a. Given an initial set of reactant and product concentrations, only those sets of
concentrations that are consistent with the reaction stoichiometry can be attained.
ICE (initial, change, equilibrium) tables are useful for determining which sets of
concentration values are possible.
b. The reaction quotient, Q, provides a convenient measure of the current progress of
a reaction. Q does not include substances whose concentrations are independent
of the amount of substance, such as for a solid in contact with a liquid solution or
with a gas, or for a pure solid or liquid in contact with a gas.
c. The value of Q (and so also K) changes when a reaction is reversed. When
reactions are added together through the presence of a common intermediate, Q
(and so also K) of the resulting reaction is a product of the values of Q (or K) for
the original reactions.
LO 6.2 The student can, given a manipulation of a chemical reaction or set of
reactions (e.g., reversal of reaction or addition of two reactions), determine the
effects of that manipulation on Q or K. [See SP 2.2]
Essential knowledge 6.A.3: When a system is at equilibrium, all

macroscopic variables, such as concentrations, partial pressures, and
temperature, do not change over time. Equilibrium results from an
equality between the rates of the forward and reverse reactions, at which
point
.
a. When equilibrium is reached, no observable changes occur in the system.
69
1. Reactant and product molecules are present.

2. Concentration of all species remains constant.
b. If the rate of the forward reaction is greater than the reverse reaction, there is a
net conversion of reactants to products. If the rate of the reverse reaction is greater
than the forward reaction, there is a net conversion of products to reactants. An
equilibrium state is reached when these rates balance, at which point the progress
of reaction, Q, becomes equal to the equilibrium constant, K.
c. Comparing Q to K allows the determination of whether the reaction is at
equilibrium, or will proceed toward products or reactants to reach equilibrium.
d. Equilibrium constants can be determined from experimental measurements of the
concentrations of the reactants and products at equilibrium.
e. Given a single reaction, initial concentrations, and K, the concentrations at
equilibrium may be predicted.
f. Graphs of concentration over time for simple chemical reactions can be used to
understand the establishment of chemical equilibrium.
LO 6.3 The student can connect kinetics to equilibrium by using reasoning
about equilibrium, such as Le Chateliers principle, to infer the relative rates of
the forward and reverse reactions. [See SP 7.2]
LO 6.4 The student can, given a set of initial conditions (concentrations or partial
pressures) and the equilibrium constant, K, use the tendency of Q to approach
K to predict and justify the prediction as to whether the reaction will proceed
toward products or reactants as equilibrium is approached. [See SP 2.2, 6.4]
LO 6.5 The student can, given data (tabular, graphical, etc.) from which the state
of a system at equilibrium can be obtained, calculate the equilibrium constant, K.
[See SP 2.2]
LO 6.6 The student can, given a set of initial conditions (concentrations or partial
pressures) and the equilibrium constant, K, use stoichiometric relationships and
the law of mass action (Q equals K at equilibrium) to determine qualitatively
and/or quantitatively the conditions at equilibrium for a system involving a single
reversible reaction. [See SP 2.2, 6.4]

70
Essential knowledge 6.A.4: The magnitude of the equilibrium constant,

K, can be used to determine whether the equilibrium lies toward the
reactant side or product side.
a. For many aqueous reactions, K is either very large or very small, and this may be
used to reason qualitatively about equilibrium systems.
b. Particulate representations can be used to describe the relationship between the
numbers of reactant and product particles present at equilibrium, and the value of
the equilibrium constant.
LO 6.7 The student is able, for a reversible reaction that has a large or small
K, to determine which chemical species will have very large versus very small
concentrations at equilibrium. [See SP 2.2, 2.3]

71
Enduring understanding 6.B: Systems at equilibrium are

responsive to external perturbations, with the response leading
to a change in the composition of the system.
Chemical equilibrium is a dynamic state in which the rates of the forward and reverse
reactions are equal. A change in conditions, such as addition of a chemical species,
change in temperature, or change in volume, can cause the rate of the forward and reverse
reactions to fall out of balance. Such a change is called a stress on the system. The system
is then temporarily out of equilibrium, and there is a net conversion between reactants
and products until a new equilibrium state is established. This net conversion is referred
to as a shift of the chemical reaction. Le Chateliers principle provides a convenient means
to reason qualitatively about the direction of the shift in an equilibrium system resulting
from various possible stresses.
Essential knowledge 6.B.1: Systems at equilibrium respond to

disturbances by partially countering the effect of the disturbance (Le
Chateliers principle).
a. Le Chateliers principle can be used to predict the response of a system to
the following stresses: addition or removal of a chemical species, change in
temperature, change in volume/pressure of a gas phase system, and dilution of a
reaction system with water or other solvent.
b. Le Chateliers principle can be used to reason about the effects a stress will have
on experimentally measurable properties, such as , temperature, and color of a
solution.
LO 6.8 The student is able to use Le Chateliers principle to predict the direction
of the shift resulting from various possible stresses on a system at chemical
equilibrium. [See SP 1.4, 6.4]
LO 6.9 The student is able to use Le Chateliers principle to design a set of
conditions that will optimize a desired outcome, such as product yield.
[See SP 4.2]
Essential knowledge 6.B.2: A disturbance to a system at equilibrium

causes Q to differ from K, thereby taking the system out of the original
equilibrium state. The system responds by bringing Q back into
agreement with K, thereby establishing a new equilibrium state.
a. Le Chateliers principle involves qualitative reasoning that is closely connected to
the quantitative approach of 6.A.3.
72
b. Some stresses, such as changes in concentration, cause a change in Q. A change in

temperature causes a change in K. In either case, the reaction shifts to bring Q and
K back into equality.
LO 6.10 The student is able to connect Le Chateliers principle to the
comparison of Q to K by explaining the effects of the stress on Q and K. [See SP
1.4, 7.2]
Enduring understanding 6.C: Chemical equilibrium plays an

important role in acid-base chemistry and in solubility.
The proton-exchange reactions of acid-base chemistry are reversible reactions that reach
equilibrium quickly, and much of acid-base chemistry can be understood by applying the
principles of chemical equilibrium. Most acid-base reactions have either large or small
K, and so qualitative conclusions regarding the equilibrium state can often be drawn
without extensive computations. The dissolution of a solid in a solvent is also a reversible
reaction that often reaches equilibrium quickly, and so can be understood by applying the
principles of chemical equilibrium.
Essential knowledge 6.C.1: Chemical equilibrium reasoning can be used

to describe the proton-transfer reactions of acid-base chemistry.
a. The concentrations of hydronium ion and hydroxide ion are often reported as
and
, respectively.
b. Water autoionizes with an equilibrium constant, . For pure water,
and this condition is called neutrality, or a neutral solution. At
,
and thus
and
add to 14. In pure water at
,
.
c. Common strong acids include

, and
. The
molecules of strong acids completely ionize in solution to produce hydronium
ions. In other words, 100 percent of the molecules of the strong acid are ionized
in a solution (assuming that the concentration is not extremely high). As such, the
concentration of
in a strong acid solution is equal to the initial concentration
of the strong acid, and thus the
of the strong acid solution is easily calculated.
d. Common strong bases include group I and II hydroxides. When dissolved in
solution, strong bases completely dissociate to produce hydroxide ions. Note that
some group II hydroxides are slightly soluble in water. However, 100 percent of the
dissolved base is ionized.

73
e. Weak acid molecules react with water to transfer a proton to the water molecule.
However, weak acid molecules only partially ionize in this way. In other
words, only a small percentage of the molecules of a weak acid are ionized in a
solution (assuming that the initial concentration is not extremely low). Thus, the
concentration of
does not equal the initial concentration of the molecular
acid, and the vast majority of the acid molecules remain un-ionized. A solution
of a weak acid thus involves equilibrium between an un-ionized acid and its
conjugate base. The equilibrium constant for this reaction is , often reported
as
. The
of a weak acid solution can be determined from the initial acid
concentration and the
. The common weak acids include carboxylic acids.
The relative magnitudes of
are influenced by structural factors such as bond
strength, solvation, and electronegativity of the atom bonded to the labile proton.
f. The common weak bases include ammonia, amines and pyridines, other
nitrogenous bases, and conjugate bases (defined below in g). Weak base molecules
in aqueous solutions react with water molecules to produce hydroxide ions.
However, only a small percentage of the molecules of a weak base in a solution
ionize in this way (assuming that the initial concentration is not extremely
low). Thus, the concentration of
in the solution does not equal the initial
concentration of the molecular base, and the vast majority of the base molecules
remain un-ionized. A solution of a weak base thus involves an equilibrium
between an un-ionized base and its conjugate acid. The equilibrium constant for
this reaction is , often reported as
. The
of a weak base solution can be
determined from the initial base concentration and the
.
g. When an acid molecule loses its proton, it becomes a base, since the resultant ion
could react with water as a base. The acid and base are referred to as a conjugate
acid-base pair. The ionization constants for the acid-base pair are related to ,
and at
,
. This relation can be used to reason qualitatively about
the relative strengths of conjugate acids and bases. For example, the conjugate base
of a strong acid is a much weaker base than
, and therefore does not react as a
base in aqueous solutions.
h. The
of an acid solution depends on both the strength of the acid and the
concentration of the acid. If we compare solutions of a weak acid and of a strong
acid at the same , we find that both solutions have the same concentration of
. However, the strong acid is completely dissociated into ions in solution,
whereas the weak acid is only partially dissociated into ions in solution. Thus,
there are vastly more un-ionized acid molecules in the weak acid solution than in
the strong acid solution at the same . Thus, to achieve solutions of equal ,
the weak acid solution must be a much greater concentration than the strong acid
solution. If we compare solutions of a weak acid and of a strong acid of the same
initial concentration, the concentration of
in the strong acid solution is
much larger (and the
thus lower) since the strong acid is 100 percent ionized.

74
i. Reactions of acids and bases are called neutralization reactions, and these
reactions generally have
, and thus can be considered to go to completion.
i. For a mixture of a strong acid with a strong base, the neutralization
reaction is
. The K for this reaction is
at
, so
the reaction goes to completion. This allows the
of mixtures of strong
acids and bases to be determined from the limiting reactant, either the acid
or the base.
ii. When a strong base is added to a solution of a weak acid, a neutralization
reaction occurs:
iii. When a strong acid is added to a solution of a weak base, a neutralization
reaction occurs:
j. For a weak acid solution and a strong acid solution with the same , it takes
much more base to neutralize the weak acid solution because the initial acid
concentration is much larger. The weak acid solution contains a large amount of
un-ionized acid molecules. Therefore, a weak acid solution resists changes in
for a much greater amount of added base.
k. A titration technique exists for neutralization reactions. At the equivalence
point, the moles of titrant and the moles of titrate are present in stoichiometric
proportions. In the vicinity of the equivalence point, the
rapidly changes. This
can be used to determine the concentration of the titrant.
l. As base is added to either a strong acid solution or a weak acid solution, the
concentration does not change much. The change in
is less than
for the region where 10 to 90 percent of the base needed to reach the equivalence
point has been added.
m. The
of an acid can be determined from the
at the half equivalence point of
the titration if the equivalence point is known (i.e., the concentration of both the
titrant and analyte are known).
n. For polyprotic acids, the use of titration curves to evaluate the number of labile
protons is important, as well as knowing which species are present in large
concentrations at any region along the curve.
Numerical computation of the concentration of each species present in the titration

curve for polyprotic acids is beyond the scope of this course and the AP Exam.
Rationale: Such computations for titration of monoprotic acids are within the scope
of the course, as is qualitative reasoning regarding what species are present in large
versus small concentrations at any point in titration of a polyprotic acid. However,
additional computations of the concentration of each species present in the titration
curve for polyprotic acids may encourage algorithmic calculations and were not
viewed as the best way to deepen understanding of the big ideas.
o. Halfway to the equivalence point, the contents of a solution, formed by titrating
a weak acid, is different from that formed by titrating a strong acid. For a strong
75
acid, the main species in a solution halfway to the equivalence point are
,
the anion from the acid (e.g., ,
), and the cation from the base (e.g.,
).
The total positive charge is equal to the total negative charge. For a weak acid,
the main species in a solution halfway to the equivalence point are
, the
anion from the acid (e.g.,
, ), the cation from the base (e.g.,
), and
undissociated acid,
. The total positive charge is equal to the total negative
charge, and
.
LO 6.11 The student can generate or use a particulate representation of an acid
(strong or weak or polyprotic) and a strong base to explain the species that will
have large versus small concentrations at equilibrium. [See SP 1.1, 1.4, 2.3]
LO 6.12 The student can reason about the distinction between strong and weak
acid solutions with similar values of , including the percent ionization of the
acids, the concentrations needed to achieve the same , and the amount of base
needed to reach the equivalence point in a titration. [See SP 1.4, 6.4, connects to
1.E.2]
LO 6.13 The student can interpret titration data for monoprotic or polyprotic
acids involving titration of a weak or strong acid by a strong base (or a weak or
strong base by a strong acid) to determine the concentration of the titrant and
the
for a weak acid, or the
for a weak base. [See SP 5.1, 6.4, connects to
1.E.2]
LO 6.14 The student can, based on the dependence of
on temperature, reason
that neutrality requires
as opposed to requiring
, including
especially the applications to biological systems. [See SP 2.2, 6.2]
LO 6.15 The student can identify a given solution as containing a mixture of
strong acids and/or bases and calculate or estimate the
(and concentrations of
all chemical species) in the resulting solution. [See SP 2.2, 2.3, 6.4]
LO 6.16 The student can identify a given solution as being the solution of a
monoprotic weak acid or base (including salts in which one ion is a weak acid
and concentration of all species in the solution, and/
or base), calculate the
or infer the relative strengths of the weak acids or bases from given equilibrium
concentrations. [See SP 2.2, 6.4]
LO 6.17 The student can, given an arbitrary mixture of weak and strong acids
and bases (including polyprotic systems), determine which species will react
strongly with one another (i.e., with
) and what species will be present in
large concentrations at equilibrium. [See SP 6.4]

76
Essential knowledge 6.C.2: The pH is an important characteristic of

aqueous solutions that can be controlled with buffers. Comparing pH to
pKa allows one to determine the protonation state of a molecule with a
labile proton.
The
of an aqueous solution is determined by the identity and concentration of the
substance that is dissolved in water. The value of the
is an important feature of the
solution because it characterizes the relative tendency of the solution to accept a proton
from an acid added to the solution, or to donate a proton to a base that is added. For acidbase systems,
characterizes the relative availability of protons, much as temperature
characterizes the relative availability of kinetic energy in the environment. It is often
desirable to use a solution as an environment that maintains a relatively constant
so
that the addition of an acid or base does not change the
(e.g., amino acids and proteins
in the body the blood maintains a relatively constant ).
a. A buffer solution contains a large concentration of both members in a conjugate
acid-base pair. The conjugate acid reacts with added base and the conjugate
base reacts with added acid. The
of the buffer is related to the
and the
concentration ratio of acid and base forms. The buffer capacity is related to
absolute concentrations of the acid and base forms. These relationships can be
used both quantitatively and qualitatively to reason about issues such as the ratio
of acid to base forms in a given buffer, the impact of this on the buffer capacity for
added acid or base, and the choice of an appropriate conjugate acid-base pair for a
desired buffer
(including polyprotic acids).
Computing the change in pH resulting from the addition of an acid or a base to a

buffer is beyond the scope of this course and the AP Exam.
Rationale: Algorithmic calculations of pH changes are not viewed as the best way to
deepen understanding of the big ideas.
The production of the Henderson-Hasselbalch equation by algebraic manipulation

of the relevant equilibrium constant expression is beyond the scope of this course
and the AP Exam.
Rationale: Reasoning about the protonation states of weak acids in solution and
the functioning of buffers is within the scope of the course. However, since the
Henderson-Hasselbalch equation is merely a rearrangement of the law of mass
action for a weak acid, inclusion of its derivation was not viewed as the best way to
deepen understanding of the big ideas.
b. If
starts as 1, it is not until the ratio changes by a factor of 10 that a 1
unit change occurs; adding small amounts of either acid or base does not change
the ratio much, so the
changes are much smaller for buffers than unbuffered
solutions.
c. Weak acids and their conjugate bases make good buffers. Strong acids and bases
do not. It takes much more base to change the
of a weak acid solution because
there is a large reservoir of undissociated weak acid.
77
d. By comparing the pH of a solution to the

of any acid in the solution, the
concentration ratio between the acid and base forms of that acid (the protonation
state) can be determined. For example, if
, the acid form has a higher
concentration than the base form. If
, the base form has a higher
concentration than the acid form. Applications of this relationship include the
use of acid-base indicators, the protonation state of protein side chains (including
acids or proteins with multiple labile protons), and the pH required for acidcatalyzed reactions in organic chemistry.
LO 6.18 The student can design a buffer solution with a target pH and buffer
capacity by selecting an appropriate conjugate acid-base pair and estimating the
concentrations needed to achieve the desired capacity. [See SP 2.3, 4.2, 6.4]
LO 6.19 The student can relate the predominant form of a chemical species
involving a labile proton (i.e., protonated/deprotonated form of a weak acid) to
the
of a solution and the
associated with the labile proton. [See SP 2.3,
5.1, 6.4]
LO 6.20 The student can identify a solution as being a buffer solution and
explain the buffer mechanism in terms of the reactions that would occur on
addition of acid or base. [See SP 6.4]
Essential knowledge 6.C.3: The solubility of a substance can be

understood in terms of chemical equilibrium.
a. The dissolution of a substance in a solvent is a reversible reaction, and so has an
associated equilibrium constant. For dissolution of a salt, the reaction quotient,
Q, is referred to as the solubility product, and the equilibrium constant for this
reaction is denoted as , the solubility-product constant.
b. The solubility of a substance can be calculated from the
for the dissolution
reaction. This relation can also be used to reason qualitatively about the relative
solubility of different substances.
c. The free energy change
for dissolution of a substance reflects both the
breaking of the forces that hold the solid together and the interaction of the
dissolved species with the solvent. In addition, entropic effects must be considered.
Qualitative reasoning regarding solubility requires consideration of all of these
contributions to the free energy.
d. All sodium, potassium, ammonium, and nitrate salts are soluble in water.

78
Memorization of other solubility rules is beyond the scope of this course and the
AP Exam.
Rationale: Memorization of solubility rules does not deepen understanding of the

big ideas.
e. A salt is less soluble in a solution that has an ion in common with the salt. This
has important consequences for solubility of salts in sea water and other natural
bodies of water. This phenomenon can be understood qualitatively using Le
Chateliers principle.
f. The solubility of a salt will be
sensitive when one of the ions is an acid or base.
Applications include the iron hydroxides of acid-mine drainage and the effects of
acid rain on solubility of carbonates. These effects can be understood qualitatively
with Le Chateliers principle.
Computations of solubility as a function of pH are beyond the scope of this course

and the AP Exam.
Rationale: Computations of solubility as a function of pH do not deepen

Computations of solubility in such solutions are beyond the scope of this course and
the AP Exam.
Rationale: Computations of solubility in such solutions do not deepen

LO 6.21 The student can predict the solubility of a salt, or rank the solubility of
values. [See SP 2.2, 2.3, 6.4]
salts, given the relevant
LO 6.22 The student can interpret data regarding solubility of salts to determine,
or rank, the relevant
values. [See SP 2.2, 2.3, 6.4]
LO 6.23 The student can interpret data regarding the relative solubility of salts
in terms of factors (common ions, ) that influence the solubility. [See SP 5.1,
6.4]
LO 6.24 The student can analyze the enthalpic and entropic changes
associated with the dissolution of a salt, using particulate level interactions and
representations. [See SP 1.4, 7.1, connects to 5.E]

79
Enduring understanding 6.D: The equilibrium constant is related

to temperature and the difference in Gibbs free energy between
reactants and products.
The magnitude of the equilibrium constant, K, specifies the relative proportion of
reactants and products present at equilibrium. This is directly related to the change in
Gibbs free energy associated with the reaction,
. The species that have the lower free
energy (reactants versus products) have larger relative concentrations at equilibrium. For
both reactants and products to be present with significant concentrations at equilibrium,
i.e., for K to be near 1, the magnitude of
must be roughly equivalent to the thermal
energy
.
Essential knowledge 6.D.1: When the difference in Gibbs free energy

between reactants and products
is much larger than the thermal
energy
, the equilibrium constant is either very small
or
very large
. When
is comparable to the thermal energy
(RT), the equilibrium constant is near 1.
a. The free energy change for a chemical process in which all of the reactants and
products are present in a standard state (as pure substances, as solutions of 1 molar
concentration, or as gases at a pressure of 1 bar, or 1 atm) is given a particular
symbol,
.
b. The equilibrium constant is related to free energy by
. This relation
may be used to connect thermodynamic reasoning about a chemical process
to equilibrium reasoning about this process. This reasoning can be done
quantitatively through numerical examples or qualitatively through estimation.
For example, the thermal energy
at room temperature is
. This sets
the energy scale for relating the enthalpy and entropy changes to the magnitude of
K, since when the magnitude of
is large compared to the thermal energy, then
K deviates strongly from 1.
c. The relation
provides a refinement of the statement in 5.E that
processes with
favor products, while those with
favor reactants.
If
, then
, while if
, then
. The phrase favors products
in 5.E is therefore more precisely stated as
, while favors reactants in 5.E is
more precisely stated as
.
d. Since K is directly related to free energy, when the magnitude of K is of primary
interest, it is useful to consider whether a reaction is exergonic
or
endergonic
. (Exothermic versus endothermic is the useful distinction
when the issue of interest is whether a reaction releases or consumes energy.) In
many biological applications, the magnitude of K is of central importance, and so
the exergonic/endergonic distinction is useful.

80

LO 6.25 The student is able to express the equilibrium constant in terms of
and
and use this relationship to estimate the magnitude of K and,
consequently, the thermodynamic favorability of the process. [See SP 2.3]

81
Science Practices for AP Chemistry

Science Practice 1: The student can use representations and
models to communicate scientific phenomena and solve
scientific problems.
The ability to use models and pictures to explain/represent what is happening at the
particulate level is fundamental to understanding chemistry. The student must be able
to draw representations of these particles (atoms, ions, molecules) whose behaviors we
observe macroscopically in the laboratory. Students should be able to draw pictures
that represent the particles we cannot observe but that match the accepted models for
various phenomena, such as ionic solids vs. metallic solids (SP 1.1). The student should
also be able to label representations of common chemical systems, such as the hydrogen
bonding between ethanol molecules vs. the covalent bonding within the molecules (SP
1.2). It is expected that the student can use experimental evidence to refine a model, such
as describing modifications to the Bohr model that are required by PES data (SP 1.3).
The student needs to be able to use representations and models to make predictions,
such as using VSEPR to draw molecules and predict their polarity (SP 1.4). The student
also should be able to translate between various representations, such as reading
photoelectron spectroscopy data and then writing an electron configuration consistent
with the data, or using the periodic table to predict either the photoelectron spectrum or
the electron configuration (SP 1.5).
1.1 The student can create representations and models of natural or man-made
phenomena and systems in the domain.
1.2 The student can describe representations and models of natural or man-made
1.3 The student can refine representations and models of natural or man-made
1.4 The student can use representations and models to analyze situations or solve
problems qualitatively and quantitatively.
1.5 The student can re-express key elements of natural phenomena across multiple
representations in the domain.
Science Practice 2: The student can use mathematics

appropriately.
Mathematical reasoning skills are essential for success in chemistry. The student should be
able to cite reasons for using a particular mathematical routine, such as graphical evidence
for the inverse relationship between P and V to justify the use of inverse proportionality
in mathematical problem solving, or justify the use of the ideal gas law based on the
82
underlying assumptions of ideal gas behavior (SP 2.1). The student should also be able to
use mathematics to solve problems that describe the physical world, such as predicting
the empirical formula for a compound based on experimental data (SP 2.2). Sometimes
students apply algorithms to solve problems, but have little conceptual understanding. An
important skill for the student is the ability to estimate the approximate value rather than
use routine application of an algorithm. For example, students should be able to predict
the sign and approximate magnitude of the enthalpy change for a spontaneous reaction
that has a negative entropy change (SP 2.3).
2.1 The student can justify the selection of a mathematical routine to solve problems.
2.2 The student can apply mathematical routines to quantities that describe natural
phenomena.
2.3 The student can estimate numerically quantities that describe natural phenomena.
Science Practice 3: The student can engage in scientific

questioning to extend thinking or to guide investigations
within the context of the AP course.
Scientists ask questions about the natural world that will help them develop further
understanding of how things work. The student in AP Chemistry should be encouraged to
ask questions that can be answered with empirical data. The laboratory experience should
include opportunities for the student to formulate hypotheses, such as in an inquiry lab
in which the student decides what questions to investigate concerning the variables that
determine the rate of a chemical reaction. Or, the student could formulate questions that
must be answered to determine the identity of an unknown (SP 3.1). The student should
be able to modify a hypothesis based on data collected, such as determining further
questions that would need to be answered to determine the mechanism for a reaction, or
completely identifying an unknown (SP 3.2). Additionally, the student should be able to
examine evidence to determine if it supports the hypothesis; for instance, are PES data
consistent with the Bohr model, or can Coulombs law and the shell model be used to
explain why the ionization energy of
is higher than that of (SP 3.3)?
3.1 The student can pose scientific questions.
3.2 The student can refine scientific questions.
3.3 The student can evaluate scientific questions.

83
Science Practice 4: The student can plan and implement

data collection strategies in relation to a particular scientific
question. [Note: Data can be collected from many different
sources, e.g., investigations, scientific observations, the
findings of others, historic reconstruction, and/or archived
data.]
An important part of chemistry is the collection of data that can be used to answer a
particular scientific question. Students should be able to justify why a particular kind of
data is most useful for addressing a question, such as the use of mass spectra to support
the existence of isotopes, or the trapping of a particular reaction intermediate to support
a hypothesized reaction mechanism (SP 4.1). The student should also be able to design
a plan that will generate useful data, such as a plan for measuring a reaction rate that
controls the relevant variables (temperatures and concentrations), or a plan to determine
homogeneity of a substance by collecting and analyzing small samples from different
regions of a substance (SP 4.2). The student should also know which data should be
collected to achieve a certain goal, such as monitoring concentrations versus time to
measure a reaction rate (SP 4.3). Finally, the student should be able to evaluate sources of
data to identify which are most useful for addressing a certain question, such as deciding
which properties (melting point, boiling point, density) are most useful for determining
the relative strength of intermolecular forces (SP 4.4).
4.1 The student can justify the selection of the kind of data needed to answer a particular
scientific question.
4.2 The student can design a plan for collecting data to answer a particular scientific
question.
4.3 The student can collect data to answer a particular scientific question.
4.4 The student can evaluate sources of data to answer a particular scientific question.
Science Practice 5: The student can perform data analysis

and evaluation of evidence.
Critical analysis of data is an essential part of chemistry. Many of the most useful concepts
in chemistry relate to patterns in the behavior of chemical systems, such as periodic trends
in atomic and molecular properties, direct and inverse proportionalities in the properties
of gases, and the coefficient-exponent relationships in a rate law derived from elementary
processes. Students should be able to analyze data to identify these types of patterns and
relationships (SP 5.1). Once such a pattern is identified, students should be able to use the
pattern to refine observations and measurements, such as indicating whether sufficient
data were collected to determine a reaction rate law, and suggesting additional data that

84
may be needed (SP 5.2). Students should also be able to evaluate the degree to which a
set of evidence can address a scientific question, such as evaluating the degree to which
a particular set of observations indicates that a process is chemical versus physical, or
indicates that a process is driven by entropy, enthalpy, or both (SP 5.3).
5.1 The student can analyze data to identify patterns or relationships.
5.2 The student can refine observations and measurements based on data analysis.
5.3 The student can evaluate the evidence provided by data sets in relation to a particular
scientific question.
Science Practice 6: The student can work with scientific

explanations and theories.
A goal of the AP course is to instill in students the ability to work with scientific
explanations and theories. This higher level of the cognitive framework builds on the
lower levels, and so the tasks will typically involve other portions of the framework,
such as the generation and use of graphical representations (SP 1) or application of
mathematical reasoning (SP 2). Students should be able to justify claims with evidence,
such as justifying a reaction as being a redox reaction based on evidence regarding
oxidation states, or justifying the relative strength of acids based on evidence regarding
of various solutions (SP 6.1). Students should also be able to construct explanations
based on evidence, such as constructing a reaction mechanism that is consistent with an
observed rate law (SP 6.2). The student should also be able to articulate reasons why a
theory is refined or replaced, such as citing specific evidence that led to revisions in the
atomic theory, or explaining how free energy as criteria for spontaneity can be viewed as a
refinement of the idea that all processes go downhill in energy (SP 6.3). The use of models
and theories to generate predictions or claims occurs in nearly all facets of chemistry,
including, for instance, the use of VSEPR theory to predict the structure of a molecule,
or the use of Le Chateliers principle to predict the response of a system to an external
stress (SP 6.4). Evaluation of alternative explanations is an important aspect of scientific
practice, and shows up particularly well in AP Chemistry with regard to using evidence to
decide between various plausible mechanisms for a chemical reaction (SP 6.5).
6.1 The student can justify claims with evidence.
6.2 The student can construct explanations of phenomena based on evidence produced
through scientific practices.
6.3 The student can articulate the reasons that scientific explanations and theories are
refined or replaced.
6.4 The student can make claims and predictions about natural phenomena based on
scientific theories and models.
6.5 The student can evaluate alternative scientific explanations.
85
Science Practice 7: The student is able to connect and

relate knowledge across various scales, concepts, and
representations in and across domains.
Students develop and demonstrate deep understanding of a subject by linking ideas both
within a particular domain and across domains. A central aspect of chemistry is linking
atomic level phenomena and models to macroscopic phenomena (SP 7.1). Such links
occur, for instance, in relating the properties of gases to kinetic theory, connecting the
properties of solids to the underlying atomic structure (covalent, molecular, metallic),
and relating concentrations of species to the dynamic nature of chemical equilibrium.
The conceptual structure of chemistry is also highly interconnected. For instance, the
thermodynamics of a chemical reaction is connected both to the structural aspects of
the reaction (i.e., which atomic-level interactions are being broken and formed), and to
the macroscopic outcomes of the reaction (i.e., the concentrations at equilibrium, the
rate at which it reaches equilibrium, and the energy released or absorbed as the reaction
progresses). In addition to connecting concepts within chemistry, students should be
able to draw connections to domains outside chemistry, such as the connection between
protein structure (primary, secondary, and tertiary) in biology, and covalent versus noncovalent interactions in chemistry (SP 7.2).
7.1 The student can connect phenomena and models across spatial and temporal scales.
7.2 The student can connect concepts in and across domain(s) to generalize or
extrapolate in and/or across enduring understandings and/or big ideas.

86
References
The AP course and exam development process relies on groups of nationally renowned
subject-matter experts in each discipline, including professionals in secondary and
postsecondary education as well as from professional organizations. These experts ensure
that AP courses and exams reflect the most up-to-date information available, that the
courses and exams are appropriate for a college-level course, and that student proficiency
is assessed properly. To help ensure that the knowledge, skills, and abilities identified in
the course and exam are articulated in a manner that will serve as a strong foundation
for both curriculum and assessment design, the subject-matter experts for AP Chemistry
utilized principles and tools from the following works.
Mislevy, R. J., and M. M. Riconscente. 2005. Evidence-Centered Assessment Design:
Layers, Structures, and Terminology (PADI Technical Report 9). Menlo Park, CA: SRI
International and University of Maryland. Retrieved May 1, 2006, from
http://padi.sri.com/downloads/TR9_ECD.pdf.
Riconscente, M. M., R. J. Mislevy, and L. Hamel. 2005. An Introduction to PADI Task
Templates (PADI Technical Report 3). Menlo Park, CA: SRI International and
University of Maryland. Retrieved May 1, 2006, from
http://padi.sri.com/downloads/TR3_Templates.pdf.
Wiggins, G., and J. McTighe. 2005. Understanding by Design. 2nd ed. Alexandria, VA:
Association for Supervision and Curriculum Development.

87
Appendix: AP Chemistry Concepts at

a Glance
Big Idea 1: The chemical elements are fundamental building
materials of matter, and all matter can be understood in terms
of arrangements of atoms. These atoms retain their identity in
chemical reactions.
Enduring understanding 1.A: All matter is made of
atoms. There are a limited number of types of atoms;
these are the elements.
Essential knowledge 1.A.1: Molecules are composed

of specific combinations of atoms; different molecules
are composed of combinations of different elements
and of combinations of the same elements in differing
amounts and proportions.
Essential knowledge 1.A.2: Chemical analysis
provides a method for determining the relative number of
atoms in a substance, which can be used to identify the
substance or determine its purity.
Essential knowledge 1.A.3: The mole is the
fundamental unit for counting numbers of particles on the
macroscopic level and allows quantitative connections to
be drawn between laboratory experiments, which occur
at the macroscopic level, and chemical processes, which
occur at the atomic level.
Enduring understanding 1.B: The atoms of each

element have unique structures arising from interactions
between electrons and nuclei.
Essential knowledge 1.B.1: The atom is composed

of negatively charged electrons, which can leave the
atom, and a positively charged nucleus that is made of
protons and neutrons. The attraction of the electrons
to the nucleus is the basis of the structure of the atom.
Coulombs law is qualitatively useful for understanding
the structure of the atom.
Essential knowledge 1.B.2: The electronic structure
of the atom can be described using an electron
configuration that reflects the concept of electrons in
quantized energy levels or shells; the energetics of the
electrons in the atom can be understood by consideration
of Coulombs law.
Enduring understanding 1.C: Elements display

periodicity in their properties when the elements are
organized according to increasing atomic number. This
periodicity can be explained by the regular variations that
occur in the electronic structures of atoms. Periodicity
is a useful principle for understanding properties and
predicting trends in properties. Its modern-day uses
range from examining the composition of materials to
generating ideas for designing new materials.
Essential knowledge 1.C.1: Many properties of

atoms exhibit periodic trends that are reflective of the
periodicity of electronic structure.
Essential knowledge 1.C.2: The currently accepted
best model of the atom is based on the quantum
mechanical model.

88
Enduring understanding 1.D: Atoms are so small that

they are difficult to study directly; atomic models are
constructed to explain experimental data on collections
of atoms.
Essential knowledge 1.D.1: As is the case with all

scientific models, any model of the atom is subject to
refinement and change in response to new experimental
results. In that sense, an atomic model is not regarded as
an exact description of the atom, but rather a theoretical
construct that fits a set of experimental data.
Essential knowledge 1.D.2: An early model of the
atom stated that all atoms of an element are identical.
Mass spectrometry data demonstrate evidence that
contradicts this early model.
Essential knowledge 1.D.3: The interaction of
electromagnetic waves or light with matter is a powerful
means to probe the structure of atoms and molecules,
and to measure their concentration.
Enduring understanding 1.E: Atoms are conserved in

physical and chemical processes.
Essential knowledge 1.E.1: Physical and chemical

processes can be depicted symbolically; when this is
done, the illustration must conserve all atoms of all
types.
Essential knowledge 1.E.2: Conservation of atoms
makes it possible to compute the masses of substances
involved in physical and chemical processes. Chemical
processes result in the formation of new substances,
and the amount of these depends on the number and the
types and masses of elements in the reactants, as well
as the efficiency of the transformation.

89
Big Idea 2: Chemical and physical properties of materials can be

explained by the structure and the arrangement of atoms, ions,
or molecules and the forces between them.
Enduring understanding 2.A: Matter can be described
by its physical properties. The physical properties of
a substance generally depend on the spacing between
the particles (atoms, molecules, ions) that make up the
substance and the forces of attraction among them.
Essential knowledge 2.A.1: The different properties

of solids and liquids can be explained by differences in
their structures, both at the particulate level and in their
supramolecular structures.
Essential knowledge 2.A.2: The gaseous state can
be effectively modeled with a mathematical equation
relating various macroscopic properties. A gas has
neither a definite volume nor a definite shape; because
the effects of attractive forces are minimal, we usually
assume that the particles move independently.
Essential knowledge 2.A.3: Solutions are homogenous
mixtures in which the physical properties are dependent
on the concentration of the solute and the strengths of
all interactions among the particles of the solutes and
solvent.
Enduring understanding 2.B: Forces of attraction

between particles (including the noble gases and also
different parts of some large molecules) are important in
determining many macroscopic properties of a substance,
including how the observable physical state changes
with temperature.
Essential knowledge 2.B.1: London dispersion

forces are attractive forces present between all atoms
and molecules. London dispersion forces are often
the strongest net intermolecular force between large
molecules.
Essential knowledge 2.B.2: Dipole forces result from
the attraction among the positive ends and negative ends
of polar molecules. Hydrogen bonding is a strong type of
dipole-dipole force that exists when very electronegative
atoms (N, O, and F) are involved.
Essential knowledge 2.B.3: Intermolecular forces play
a key role in determining the properties of substances,
including biological structures and interactions.
Enduring understanding 2.C: The strong electrostatic

forces of attraction holding atoms together in a unit are
called chemical bonds.
Essential knowledge 2.C.1: In covalent bonding,

electrons are shared between the nuclei of two atoms
to form a molecule or polyatomic ion. Electronegativity
differences between the two atoms account for the
distribution of the shared electrons and the polarity of
the bond.
Essential knowledge 2.C.2: Ionic bonding results from
the net attraction between oppositely charged ions,
closely packed together in a crystal lattice.
Essential knowledge 2.C.3: Metallic bonding describes
an array of positively charged metal cores surrounded by
a sea of mobile valence electrons.
Essential knowledge 2.C.4: The localized electron
bonding model describes and predicts molecular
geometry using Lewis diagrams and the VSEPR model.

90
Enduring understanding 2.D: The type of bonding in

the solid state can be deduced from the properties of the
solid state.
Essential knowledge 2.D.1: Ionic solids have high

melting points, are brittle, and conduct electricity only
when molten or in solution.
Essential knowledge 2.D.2: Metallic solids are good
conductors of heat and electricity, have a wide range
of melting points, and are shiny, malleable, ductile, and
readily alloyed.
Essential knowledge 2.D.3: Covalent network solids
have properties that reflect their underlying 2-D or
3-D networks of covalent bonds. Covalent network
solids generally have extremely high melting points
and are hard.
Essential knowledge 2.D.4: Molecular solids with
low molecular weight usually have low melting points
and are not expected to conduct electricity as solids, in
solution, or when molten.

91
Big Idea 3: Changes in matter involve the rearrangement and/or

reorganization of atoms and/or the transfer of electrons.
Enduring understanding 3.A: Chemical changes
are represented by a balanced chemical equation that
identifies the ratios with which reactants react and
products form.
Essential knowledge 3.A.1: A chemical change may be

represented by a molecular, ionic, or net ionic equation.
Enduring understanding 3.B: Chemical reactions can

be classified by considering what the reactants are, what
the products are, or how they change from one into the
other. Classes of chemical reactions include synthesis,
decomposition, acid-base, and oxidation-reduction
reactions.
Essential knowledge 3.B.1: Synthesis reactions

are those in which atoms and/or molecules combine
to form a new compound. Decomposition is the
reverse of synthesis, a process whereby molecules are
decomposed, often by the use of heat.
Essential knowledge 3.A.2: Quantitative information

can be derived from stoichiometric calculations that
utilize the mole ratios from the balanced chemical
equations. The role of stoichiometry in real-world
applications is important to note, so that it does not
seem to be simply an exercise done only by chemists.
Essential knowledge 3.B.2: In a neutralization

reaction, protons are transferred from an acid to a base.
Essential knowledge 3.B.3: In oxidation-reduction
(redox) reactions, there is a net transfer of electrons. The
species that loses electrons is oxidized, and the species
that gains electrons is reduced.
Enduring understanding 3.C: Chemical and physical

transformations may be observed in several ways and
typically involve a change in energy.
Essential knowledge 3.C.1: Production of heat or light,

formation of a gas, and formation of a precipitate and/
or a color change are possible evidences that a chemical
change has occurred.
Essential knowledge 3.C.2: Net changes in energy for
a chemical reaction can be endothermic or exothermic.
Essential knowledge 3.C.3: Electrochemistry shows
the interconversion between chemical and electrical
energy in galvanic and electrolytic cells.

92
Big Idea 4: Rates of chemical reactions are determined by details

of the molecular collisions.
Enduring understanding 4.A: Reaction rates that
depend on temperature and other environmental factors
are determined by measuring changes in concentrations
of reactants or products over time.
Essential knowledge 4.A.1: The rate of a reaction

is influenced by the concentration or pressure of
reactants, the phase of the reactants and products, and
environmental factors such as temperature and solvent.
Essential knowledge 4.A.2: The rate law shows how
the rate depends on reactant concentrations.
Essential knowledge 4.A.3: The magnitude and
temperature dependence of the rate of reaction is
contained quantitatively in the rate constant.
Enduring understanding 4.B: Elementary reactions

are mediated by collisions between molecules. Only
collisions having sufficient energy and proper relative
orientation of reactants lead to products.
Essential knowledge 4.B.1: Elementary reactions can

be unimolecular or involve collisions between two or
more molecules.
Essential knowledge 4.B.2: Not all collisions are
successful. To get over the activation energy barrier,
the colliding species need sufficient energy. Also,
the orientations of the reactant molecules during the
collision must allow for the rearrangement of reactant
bonds to form product bonds.
Essential knowledge 4.B.3: A successful collision
can be viewed as following a reaction path with an
associated energy profile.
Enduring understanding 4.C: Many reactions proceed

via a series of elementary reactions.
Essential knowledge 4.C.1: The mechanism of a

multistep reaction consists of a series of elementary
reactions that add up to the overall reaction.
Essential knowledge 4.C.2: In many reactions, the rate
is set by the slowest elementary reaction, or rate-limiting
step.
Essential knowledge 4.C.3: Reaction intermediates,
which are formed during the reaction but not present in
the overall reaction, play an important role in multistep
reactions.
Enduring understanding 4.D: Reaction rates may be

increased by the presence of a catalyst.
Essential knowledge 4.D.1: Catalysts function by

lowering the activation energy of an elementary step in a
reaction mechanism, and by providing a new and faster
reaction mechanism.
Essential knowledge 4.D.2: Important classes in
catalysis include acid-base catalysis, surface catalysis,
and enzyme catalysis.

93
Big Idea 5: The laws of thermodynamics describe the essential

role of energy and explain and predict the direction of changes
in matter.
Enduring understanding 5.A: Two systems with
different temperatures that are in thermal contact
will exchange energy. The quantity of thermal energy
transferred from one system to another is called heat.
Essential knowledge 5.A.1: Temperature is a measure

of the average kinetic energy of atoms and molecules.
Essential knowledge 5.A.2: The process of kinetic
energy transfer at the particulate scale is referred to
in this course as heat transfer, and the spontaneous
direction of the transfer is always from a hot to a cold
body.
Enduring understanding 5.B: Energy is neither created Essential knowledge 5.B.1: Energy is transferred
nor destroyed, but only transformed from one form to
between systems either through heat transfer or through
another.
one system doing work on the other system.
Essential knowledge 5.B.2: When two systems are
in contact with each other and are otherwise isolated,
the energy that comes out of one system is equal to the
energy that goes into the other system. The combined
energy of the two systems remains fixed. Energy transfer
can occur through either heat exchange or work.
Essential knowledge 5.B.3: Chemical systems undergo
three main processes that change their energy: heating/
cooling, phase transitions, and chemical reactions.
Essential knowledge 5.B.4: Calorimetry is an
experimental technique that is used to determine the
heat exchanged/transferred in a chemical system.
Enduring understanding 5.C: Breaking bonds requires
energy, and making bonds releases energy.
Essential knowledge 5.C.1: Potential energy is

associated with a particular geometric arrangement of
atoms or ions and the electrostatic interactions between
them.
Essential knowledge 5.C.2: The net energy change
during a reaction is the sum of the energy required
to break the bonds in the reactant molecules and the
energy released in forming the bonds of the product
molecules. The net change in energy may be positive
for endothermic reactions where energy is required,
or negative for exothermic reactions where energy is
released.

94
Enduring understanding 5.D: Electrostatic forces exist

between molecules as well as between atoms or ions,
and breaking the resultant intermolecular interactions
requires energy.
Essential knowledge 5.D.1: Potential energy is

associated with the interaction of molecules; as
molecules draw near each other, they experience an
attractive force.
Essential knowledge 5.D.2: At the particulate scale,
chemical processes can be distinguished from physical
processes because chemical bonds can be distinguished
from intermolecular interactions.
Essential knowledge 5.D.3: Noncovalent and
intermolecular interactions play important roles in many
biological and polymer systems.
Enduring understanding 5.E: Chemical or physical

processes are driven by a decrease in enthalpy or an
increase in entropy, or both.
Essential knowledge 5.E.1: Entropy is a measure of

the dispersal of matter and energy.
Essential knowledge 5.E.2: Some physical or chemical
processes involve both a decrease in the internal energy
of the components
under consideration and an
increase in the entropy of those components
. These processes are necessarily
thermodynamically favored
.
Essential knowledge 5.E.3: If a chemical or physical
process is not driven by both entropy and enthalpy
changes, then the Gibbs free energy change can be used
to determine whether the process is thermodynamically
favored.
Essential knowledge 5.E.4: External sources of energy
can be used to drive change in cases where the Gibbs
free energy change is positive.
Essential knowledge 5.E.5: A thermodynamically
favored process may not occur due to kinetic constraints
(kinetic vs. thermodynamic control).

95
Big Idea 6: Any bond or intermolecular attraction that can be

formed can be broken. These two processes are in a dynamic
competition, sensitive to initial conditions and external
perturbations.
Enduring understanding 6.A: Chemical equilibrium is
a dynamic, reversible state in which rates of opposing
processes are equal.
Essential knowledge 6.A.1: In many classes of

reactions, it is important to consider both the forward
and reverse reaction.
Essential knowledge 6.A.2: The current state of
a system undergoing a reversible reaction can be
characterized by the extent to which reactants have been
converted to products. The relative quantities of reaction
components are quantitatively described by the reaction
quotient, Q.
Essential knowledge 6.A.3: When a system is
at equilibrium, all macroscopic variables, such as
concentrations, partial pressures, and temperature,
do not change over time. Equilibrium results from an
equality between the rates of the forward and reverse
reactions, at which point
.
Essential knowledge 6.A.4: The magnitude of the
equilibrium constant, K, can be used to determine
whether the equilibrium lies toward the reactant side or
product side.
Enduring understanding 6.B: Systems at equilibrium

are responsive to external perturbations, with the
response leading to a change in the composition of the
system.
Essential knowledge 6.B.1: Systems at equilibrium

respond to disturbances by partially countering the effect
of the disturbance (Le Chateliers principle).
Enduring understanding 6.C: Chemical equilibrium

plays an important role in acid-base chemistry and in
solubility.
Essential knowledge 6.C.1: Chemical equilibrium

reasoning can be used to describe the proton-transfer
reactions of acid-base chemistry.
Essential knowledge 6.B.2: A disturbance to a system

at equilibrium causes Q to differ from K, thereby taking
the system out of the original equilibrium state. The
system responds by bringing Q back into agreement with
K, thereby establishing a new equilibrium state.
Essential knowledge 6.C.2: The is an important

characteristic of aqueous solutions that can be controlled
with buffers. Comparing to
allows one to
determine the protonation state of a molecule with a
labile proton.
Essential knowledge 6.C.3: The solubility of a
substance can be understood in terms of chemical
equilibrium.

96
Enduring understanding 6.D: The equilibrium constant Essential knowledge 6.D.1: When the difference
is related to temperature and the difference in Gibbs free in Gibbs free energy between reactants and products
energy between reactants and products.
is much larger than the thermal energy
, the
equilibrium constant is either very small
or
very large
. When
is comparable to the
thermal energy
, the equilibrium constant is near 1.

97
Learning Objectives
Learning objective 1.1 The student can justify the observation that the ratio of the masses of the constituent
elements in any pure sample of that compound is always identical on the basis of the atomic molecular theory. [See
SP 6.1; Essential knowledge 1.A.1]
Learning objective 1.2 The student is able to select and apply mathematical routines to mass data to identify or
infer the composition of pure substances and/or mixtures. [See SP 2.2; Essential knowledge 1.A.2]
Learning objective 1.3 The student is able to select and apply mathematical relationships to mass data in
order to justify a claim regarding the identity and/or estimated purity of a substance. [See SP 2.2, 6.1; Essential
knowledge 1.A.2]
Learning objective 1.4 The student is able to connect the number of particles, moles, mass, and volume of
substances to one another, both qualitatively and quantitatively. [See SP 7.1; Essential knowledge 1.A.3]
Learning objective 1.5 The student is able to explain the distribution of electrons in an atom or ion based upon
data. [See SP 1.5, 6.2; Essential knowledge 1.B.1]
Learning objective 1.6 The student is able to analyze data relating to electron energies for patterns and
relationships. [See SP 5.1; Essential knowledge 1.B.1]
Learning objective 1.7 The student is able to describe the electronic structure of the atom, using PES data,
ionization energy data, and/or Coulombs law to construct explanations of how the energies of electrons within
shells in atoms vary. [See SP 5.1, 6.2; Essential knowledge 1.B.2]
Learning objective 1.8 The student is able to explain the distribution of electrons using Coulombs law to analyze
measured energies. [See SP 6.2; Essential knowledge 1.B.2]
Learning objective 1.9 The student is able to predict and/or justify trends in atomic properties based on location
on the periodic table and/or the shell model. [See SP 6.4; Essential knowledge 1.C.1]
Learning objective 1.10 Students can justify with evidence the arrangement of the periodic table and can apply
periodic properties to chemical reactivity. [See SP 6.1; Essential knowledge 1.C.1]
Learning objective 1.11 The student can analyze data, based on periodicity and the properties of binary
compounds, to identify patterns and generate hypotheses related to the molecular design of compounds for which
data are not supplied. [See SP 3.1, 5.1; Essential knowledge 1.C.1]
Learning objective 1.12 The student is able to explain why a given set of data suggests, or does not suggest,
the need to refine the atomic model from a classical shell model with the quantum mechanical model. [See SP 6.3;
Essential knowledge 1.C.2]
Learning objective 1.13 Given information about a particular model of the atom, the student is able to determine
if the model is consistent with specified evidence. [See SP 5.3; Essential knowledge 1.D.1]
Learning objective 1.14 The student is able to use data from mass spectrometry to identify the elements and the
masses of individual atoms of a specific element. [See SP 1.4, 1.5; Essential knowledge 1.D.2]
Learning objective 1.15 The student can justify the selection of a particular type of spectroscopy to measure
properties associated with vibrational or electronic motions of molecules. [See SP 4.1, 6.4; Essential knowledge
1.D.3]
Learning objective 1.16 The student can design and/or interpret the results of an experiment regarding the
absorption of light to determine the concentration of an absorbing species in a solution. [See SP 4.2, 5.1; Essential
knowledge 1.D.3]

98
Learning objective 1.17 The student is able to express the law of conservation of mass quantitatively and
qualitatively using symbolic representations and particulate drawings. [See SP 1.5; Essential knowledge 1.E.1]
Learning objective 1.18 The student is able to apply conservation of atoms to the rearrangement of atoms in
various processes. [See SP 1.4; Essential knowledge 1.E.2]
Learning objective 1.19 The student can design, and/or interpret data from, an experiment that uses gravimetric
analysis to determine the concentration of an analyte in a solution. [See SP 4.2, 5.1, 6.4; Essential knowledge
1.E.2]
Learning objective 1.20 The student can design, and/or interpret data from, an experiment that uses titration to
determine the concentration of an analyte in a solution. [See SP 4.2, 5.1, 6.4; Essential knowledge 1.E.2]
Learning objective 2.1 Students can predict properties of substances based on their chemical formulas, and
provide explanations of their properties based on particle views. [See SP 6.4, 7.1; Essential knowledge
components of 2.A2.D]
Learning objective 2.2 The student is able to explain the relative strengths of acids and bases based on molecular
structure, interparticle forces, and solution equilibrium. [See SP 7.2, connects to Big Idea 5, Big Idea 6; Essential
knowledge components of 2.A2.D]
Learning objective 2.3 The student is able to use aspects of particulate models (i.e., particle spacing, motion, and
forces of attraction) to reason about observed differences between solid and liquid phases and among solid and
liquid materials. [See SP 6.4, 7.1; Essential knowledge 2.A.1]
Learning objective 2.4 The student is able to use KMT and concepts of intermolecular forces to make predictions
about the macroscopic properties of gases, including both ideal and nonideal behaviors. [See SP 1.4, 6.4; Essential
knowledge 2.A.2]
Learning objective 2.5 The student is able to refine multiple representations of a sample of matter in the gas
phase to accurately represent the effect of changes in macroscopic properties on the sample. [See SP 1.3, 6.4, 7.2;
Essential knowledge 2.A.2]
Learning objective 2.6 The student can apply mathematical relationships or estimation to determine macroscopic
variables for ideal gases. [See SP 2.2, 2.3; Essential knowledge 2.A.2]
Learning objective 2.7 The student is able to explain how solutes can be separated by chromatography based on
intermolecular interactions. [See SP 6.2; Essential knowledge 2.A.3]
Learning objective 2.8 The student can draw and/or interpret representations of solutions that show the
interactions between the solute and solvent. [See SP 1.1, 1.2, 6.4; Essential knowledge 2.A.3]
Learning objective 2.9 The student is able to create or interpret representations that link the concept of molarity
with particle views of solutions. [See SP 1.1, 1.4; Essential knowledge 2.A.3]
Learning objective 2.10 The student can design and/or interpret the results of a separation experiment (filtration,
paper chromatography, column chromatography, or distillation) in terms of the relative strength of interactions
among and between the components. [See SP 4.2, 5.1, 6.4; Essential knowledge 2.A.3]
Learning objective 2.11 The student is able to explain the trends in properties and/or predict properties of
samples consisting of particles with no permanent dipole on the basis of London dispersion forces. [See SP 6.2, 6.4;
Essential knowledge 2.B.1]
Learning objective 2.12 The student can qualitatively analyze data regarding real gases to identify deviations
from ideal behavior and relate these to molecular interactions. [See SP 5.1, 6.5; Essential knowledge 2.B.2,
connects to 2.A.2]

99
Learning objective 2.13 The student is able to describe the relationships between the structural features of polar
molecules and the forces of attraction between the particles. [See SP 1.4, 6.4; Essential knowledge 2.B.2]
Learning objective 2.14 The student is able to apply Coulombs law qualitatively (including using representations)
to describe the interactions of ions, and the attractions between ions and solvents to explain the factors that
contribute to the solubility of ionic compounds. [See SP 1.4, 6.4; Essential knowledge 2.B.2]
Learning objective 2.15 The student is able to explain observations regarding the solubility of ionic solids and
molecules in water and other solvents on the basis of particle views that include intermolecular interactions and
entropic effects. [See SP 1.4, 6.2; Essential knowledge 2.B.3, connects to 5.E.1]
Learning objective 2.16 The student is able to explain the properties (phase, vapor pressure, viscosity, etc.) of
small and large molecular compounds in terms of the strengths and types of intermolecular forces. [See SP 6.2;
Essential knowledge 2.B.3]
Learning objective 2.17 The student can predict the type of bonding present between two atoms in a binary
compound based on position in the periodic table and the electronegativity of the elements. [See SP 6.4; Essential
knowledge components of 2.C]
Learning objective 2.18 The student is able to rank and justify the ranking of bond polarity on the basis of the
locations of the bonded atoms in the periodic table. [See SP 6.1; Essential knowledge 2.C.1]
Learning objective 2.19 The student can create visual representations of ionic substances that connect the
microscopic structure to macroscopic properties, and/or use representations to connect the microscopic structure
to macroscopic properties (e.g., boiling point, solubility, hardness, brittleness, low volatility, lack of malleability,
ductility, or conductivity). [See SP 1.1, 1.4, 7.1; Essential knowledge 2.C.2, connects to 2.D.1, 2.D.2]
Learning objective 2.20 The student is able to explain how a bonding model involving delocalized electrons is
consistent with macroscopic properties of metals (e.g., conductivity, malleability, ductility, and low volatility) and the
shell model of the atom. [See SP 6.2, 7.1; Essential knowledge 2.C.3, connects to 2.D.2]
Learning objective 2.21 The student is able to use Lewis diagrams and VSEPR to predict the geometry of
molecules, identify hybridization, and make predictions about polarity. [See SP 1.4; Essential knowledge 2.C.4]
Learning objective 2.22 The student is able to design or evaluate a plan to collect and/or interpret data needed to
deduce the type of bonding in a sample of a solid. [See SP 4.2, 6.4; Essential knowledge components of 2.D]
Learning objective 2.23 The student can create a representation of an ionic solid that shows essential
characteristics of the structure and interactions present in the substance. [See SP 1.1; Essential knowledge
2.D.1]
Learning objective 2.24 The student is able to explain a representation that connects properties of an ionic solid
to its structural attributes and to the interactions present at the atomic level. [See SP 1.1, 6.2, 7.1; Essential
knowledge 2.D.1]
Learning objective 2.25 The student is able to compare the properties of metal alloys with their constituent
elements to determine if an alloy has formed, identify the type of alloy formed, and explain the differences in
properties using particulate level reasoning. [See SP 1.4, 7.2; Essential knowledge 2.D.2]
Learning objective 2.26 Students can use the electron sea model of metallic bonding to predict or make claims
about the macroscopic properties of metals or alloys. [See SP 6.4, 7.1; Essential knowledge 2.D.2]
Learning objective 2.27 The student can create a representation of a metallic solid that shows essential
2.D.2]

100
Learning objective 2.28 The student is able to explain a representation that connects properties of a metallic
solid to its structural attributes and to the interactions present at the atomic level. [See SP 1.1, 6.2, 7.1; Essential
knowledge 2.D.2]
Learning objective 2.29 The student can create a representation of a covalent solid that shows essential
2.D.3]
Learning objective 2.30 The student is able to explain a representation that connects properties of a covalent
knowledge 2.D.3]
Learning objective 2.31 The student can create a representation of a molecular solid that shows essential
2.D.4]
Learning objective 2.32 The student is able to explain a representation that connects properties of a molecular
knowledge 2.D.4]
Learning objective 3.1 Students can translate among macroscopic observations of change, chemical equations,
and particle views. [See SP 1.5, 7.1; Essential knowledge components of 3.A3.C]
Learning objective 3.2 The student can translate an observed chemical change into a balanced chemical equation
and justify the choice of equation type (molecular, ionic, or net ionic) in terms of utility for the given circumstances.
[See SP 1.5, 7.1; Essential knowledge 3.A.1]
Learning objective 3.3 The student is able to use stoichiometric calculations to predict the results of performing
a reaction in the laboratory and/or to analyze deviations from the expected results. [See SP 2.2, 5.1; Essential
knowledge 3.A.2]
Learning objective 3.4 The student is able to relate quantities (measured mass of substances, volumes of
solutions, or volumes and pressures of gases) to identify stoichiometric relationships for a reaction, including
situations involving limiting reactants and situations in which the reaction has not gone to completion. [See SP 2.2,
5.1, 6.4; Essential knowledge 3.A.2]
Learning objective 3.5 The student is able to design a plan in order to collect data on the synthesis or
decomposition of a compound to confirm the conservation of matter and the law of definite proportions. [See SP
2.1, 4.2, 6.4; Essential knowledge 3.B.1]
Learning objective 3.6 The student is able to use data from synthesis or decomposition of a compound to confirm
the conservation of matter and the law of definite proportions. [See SP 2.2, 6.1; Essential knowledge 3.B.1]
Learning objective 3.7 The student is able to identify compounds as Brnsted-Lowry acids, bases, and/or
conjugate acid-base pairs, using proton-transfer reactions to justify the identification. [See SP 6.1; Essential
knowledge 3.B.2]
Learning objective 3.8 The student is able to identify redox reactions and justify the identification in terms of
electron transfer. [See SP 6.1; Essential knowledge 3.B.3]
Learning objective 3.9 The student is able to design and/or interpret the results of an experiment involving a
redox titration. [See SP 4.2, 5.1; Essential knowledge 3.B.3]
Learning objective 3.10 The student is able to evaluate the classification of a process as a physical change,
chemical change, or ambiguous change based on both macroscopic observations and the distinction between
rearrangement of covalent interactions and noncovalent interactions. [See SP 1.4, 6.1; Essential knowledge
3.C.1, connects to 5.D.2]

101
Learning objective 3.11 The student is able to interpret observations regarding macroscopic energy changes
associated with a reaction or process to generate a relevant symbolic and/or graphical representation of the energy
changes. [See SP 1.5, 4.4; Essential knowledge 3.C.2]
Learning objective 3.12 The student can make qualitative or quantitative predictions about galvanic or electrolytic
reactions based on half-cell reactions and potentials and/or Faradays laws. [See SP 2.2, 2.3, 6.4; Essential
knowledge 3.C.3]
Learning objective 3.13 The student can analyze data regarding galvanic or electrolytic cells to identify properties
of the underlying redox reactions. [See SP 5.1; Essential knowledge 3.C.3]
Learning objective 4.1 The student is able to design and/or interpret the results of an experiment regarding the
factors (i.e., temperature, concentration, surface area) that may influence the rate of a reaction. [See SP 4.2, 5.1;
Learning objective 4.2 The student is able to analyze concentration vs. time data to determine the rate law for a
zeroth-, first-, or second-order reaction. [See SP 5.1, 6.4; Essential knowledge 4.A.2, connects to 4.A.3]
Learning objective 4.3 The student is able to connect the half-life of a reaction to the rate constant of a first-order
reaction and justify the use of this relation in terms of the reaction being a first-order reaction. [See SP 2.1, 2.2;
Learning objective 4.4 The student is able to connect the rate law for an elementary reaction to the frequency
and success of molecular collisions, including connecting the frequency and success to the order and rate constant,
respectively. [See SP 7.1; Essential knowledge 4.B.1, connects to 4.A.3, 4.B.2]
Learning objective 4.5 The student is able to explain the difference between collisions that convert reactants to
products and those that do not in terms of energy distributions and molecular orientation. [See SP 6.2; Essential
knowledge 4.B.2]
Learning objective 4.6 The student is able to use representations of the energy profile for an elementary reaction
(from the reactants, through the transition state, to the products) to make qualitative predictions regarding the
relative temperature dependence of the reaction rate. [See SP 1.4, 6.4; Essential knowledge 4.B.3]
Learning objective 4.7 The student is able to evaluate alternative explanations, as expressed by reaction
mechanisms, to determine which are consistent with data regarding the overall rate of a reaction, and data that can
be used to infer the presence of a reaction intermediate. [See SP 6.5; connects to Essential knowledge 4.C.1,
4.C.2, 4.C.3]
Learning objective 4.8 The student can translate among reaction energy profile representations, particulate
representations, and symbolic representations (chemical equations) of a chemical reaction occurring in the presence
and absence of a catalyst. [See SP 1.5; Essential knowledge 4.D.1]
Learning objective 4.9 The student is able to explain changes in reaction rates arising from the use of acid-base
catalysts, surface catalysts, or enzyme catalysts, including selecting appropriate mechanisms with or without the
catalyst present. [See SP 6.2, 7.2; Essential knowledge 4.D.2]
Learning objective 5.1 The student is able to create or use graphical representations in order to connect the
dependence of potential energy to the distance between atoms and factors, such as bond order (for covalent
interactions) and polarity (for intermolecular interactions), which influence the interaction strength. [See SP 1.1, 1.4,
7.2, connects to Big Idea 2; Essential knowledge components of 5.A5.E]
Learning objective 5.2 The student is able to relate temperature to the motions of particles, either via particulate
representations, such as drawings of particles with arrows indicating velocities, and/or via representations of
average kinetic energy and distribution of kinetic energies of the particles, such as plots of the Maxwell-Boltzmann
distribution. [See SP 1.1, 1.4, 7.1; Essential knowledge 5.A.1]

102
Learning objective 5.3 The student can generate explanations or make predictions about the transfer of thermal
energy between systems based on this transfer being due to a kinetic energy transfer between systems arising from
molecular collisions. [See SP 7.1; Essential knowledge 5.A.2]
Learning objective 5.4 The student is able to use conservation of energy to relate the magnitudes of the energy
changes occurring in two or more interacting systems, including identification of the systems, the type (heat versus
work), or the direction of energy flow. [See SP 1.4, 2.2, connects to Essential knowledge 5.B.1, 5.B.2]
Learning objective 5.5 The student is able to use conservation of energy to relate the magnitudes of the energy
changes when two nonreacting substances are mixed or brought into contact with one another. [See SP 2.2,
connects to Essential knowledge 5.B.1, 5.B.2]
Learning objective 5.6 The student is able to use calculations or estimations to relate energy changes associated
with heating/cooling a substance to the heat capacity, relate energy changes associated with a phase transition to
the enthalpy of fusion/vaporization, relate energy changes associated with a chemical reaction to the enthalpy of
the reaction, and relate energy changes to
work. [See SP 2.2, 2.3; Essential knowledge 5.B.3]
Learning objective 5.7 The student is able to design and/or interpret the results of an experiment in which
calorimetry is used to determine the change in enthalpy of a chemical process (heating/cooling, phase transition, or
chemical reaction) at constant pressure. [See SP 4.2, 5.1, 6.4; Essential knowledge 5.B.4]
Learning objective 5.8 The student is able to draw qualitative and quantitative connections between the
reaction enthalpy and the energies involved in the breaking and formation of chemical bonds. [See SP 2.3, 7.1, 7.2;
Essential knowledge 5.C.2]
Learning objective 5.9 The student is able to make claims and/or predictions regarding relative magnitudes of the
forces acting within collections of interacting molecules based on the distribution of electrons within the molecules
and the types of intermolecular forces through which the molecules interact. [See SP 6.4; Essential knowledge
5.D.1]
Learning objective 5.10 The student can support the claim about whether a process is a chemical or physical
change (or may be classified as both) based on whether the process involves changes in intramolecular versus
intermolecular interactions. [See SP 5.1; Essential knowledge 5.D.2]
Learning objective 5.11 The student is able to identify the noncovalent interactions within and between large
molecules, and/or connect the shape and function of the large molecule to the presence and magnitude of these
interactions. [See SP 7.2; Essential knowledge 5.D.3]
Learning objective 5.12 The student is able to use representations and models to predict the sign and relative
magnitude of the entropy change associated with chemical or physical processes. [See SP 1.4; Essential
knowledge 5.E.1]
Learning objective 5.13 The student is able to predict whether or not a physical or chemical process is
thermodynamically favored by determination of (either quantitatively or qualitatively) the signs of both
and
,
and calculation or estimation of
when needed. [See SP 2.2, 2.3, 6.4; Essential knowledge 5.E.2, connects to
5.E.3]
Learning objective 5.14 The student is able to determine whether a chemical or physical process is
thermodynamically favorable by calculating the change in standard Gibbs free energy. [See SP 2.2; Essential
knowledge 5.E.3, connects to 5.E.2]
Learning objective 5.15 The student is able to explain how the application of external energy sources or the
coupling of favorable with unfavorable reactions can be used to cause processes that are not thermodynamically
favorable to become favorable. [See SP 6.2; Essential knowledge 5.E.4]

103
Learning objective 5.16 The student can use Le Chateliers principle to make qualitative predictions for systems
in which coupled reactions that share a common intermediate drive formation of a product. [See SP 6.4; Essential
knowledge 5.E.4, connects to 6.B.1]
Learning objective 5.17 The student can make quantitative predictions for systems involving coupled reactions
that share a common intermediate, based on the equilibrium constant for the combined reaction. [See SP 6.4;
Essential knowledge 5.E.4, connects to 6.A.2]
Learning objective 5.18 The student can explain why a thermodynamically favored chemical reaction may not
produce large amounts of product (based on consideration of both initial conditions and kinetic effects), or why a
thermodynamically unfavored chemical reaction can produce large amounts of product for certain sets of initial
conditions. [See SP 1.3, 7.2; Essential knowledge 5.E.5, connects to 6.D.1]
Learning objective 6.1 The student is able to, given a set of experimental observations regarding physical,
chemical, biological, or environmental processes that are reversible, construct an explanation that connects
the observations to the reversibility of the underlying chemical reactions or processes. [See SP 6.2; Essential
knowledge 6.A.1]
Learning objective 6.2 The student can, given a manipulation of a chemical reaction or set of reactions (e.g.,
reversal of reaction or addition of two reactions), determine the effects of that manipulation on Q or K. [See SP 2.2;
Learning objective 6.3 The student can connect kinetics to equilibrium by using reasoning about equilibrium, such
as Le Chateliers principle, to infer the relative rates of the forward and reverse reactions. [See SP 7.2; Essential
knowledge 6.A.3]
Learning objective 6.4 The student can, given a set of initial conditions (concentrations or partial pressures) and
the equilibrium constant, K, use the tendency of Q to approach K to predict and justify the prediction as to whether
the reaction will proceed toward products or reactants as equilibrium is approached. [See SP 2.2, 6.4; Essential
knowledge 6.A.3]
Learning objective 6.5 The student can, given data (tabular, graphical, etc.) from which the state of a system at
equilibrium can be obtained, calculate the equilibrium constant, K. [See SP 2.2; Essential knowledge 6.A.3]
Learning objective 6.6 The student can, given a set of initial conditions (concentrations or partial pressures) and
the equilibrium constant, K, use stoichiometric relationships and the law of mass action (Q equals K at equilibrium)
to determine qualitatively and/or quantitatively the conditions at equilibrium for a system involving a single
reversible reaction. [See SP 2.2, 6.4; Essential knowledge 6.A.3]
Learning objective 6.7 The student is able, for a reversible reaction that has a large or small K, to determine
which chemical species will have very large versus very small concentrations at equilibrium. [See SP 2.2, 2.3;
Learning objective 6.8 The student is able to use Le Chateliers principle to predict the direction of the shift
resulting from various possible stresses on a system at chemical equilibrium. [See SP 1.4, 6.4; Essential
knowledge 6.B.1]
Learning objective 6.9 The student is able to use Le Chateliers principle to design a set of conditions that will
optimize a desired outcome, such as product yield. [See SP 4.2; Essential knowledge 6.B.1]
Learning objective 6.10 The student is able to connect Le Chateliers principle to the comparison of Q to K by
explaining the effects of the stress on Q and K. [See SP 1.4, 7.2; Essential knowledge 6.B.2]
Learning objective 6.11 The student can generate or use a particulate representation of an acid (strong or weak or
polyprotic) and a strong base to explain the species that will have large versus small concentrations at equilibrium.
[See SP 1.1, 1.4, 2.3; Essential knowledge 6.C.1]

104
Learning objective 6.12 The student can reason about the distinction between strong and weak acid solutions
with similar values of , including the percent ionization of the acids, the concentrations needed to achieve the
same pH, and the amount of base needed to reach the equivalence point in a titration. [See SP 1.4, 6.4; Essential
knowledge 6.C.1, connects to 1.E.2]
Learning objective 6.13 The student can interpret titration data for monoprotic or polyprotic acids involving
titration of a weak or strong acid by a strong base (or a weak or strong base by a strong acid) to determine the
concentration of the titrant and the
for a weak acid, or the
for a weak base. [See SP 5.1, 6.4; Essential
knowledge 6.C.1, connects to I.E.2]
Learning objective 6.14 The student can, based on the dependence of on temperature, reason that neutrality
requires
as opposed to requiring
, including especially the applications to biological systems. [See
SP 2.2, 6.2; Essential knowledge 6.C.1]
Learning objective 6.15 The student can identify a given solution as containing a mixture of strong acids and/or
bases and calculate or estimate the (and concentrations of all chemical species) in the resulting solution. [See
SP 2.2, 2.3, 6.4; Essential knowledge 6.C.1]
Learning objective 6.16 The student can identify a given solution as being the solution of a monoprotic weak acid
or base (including salts in which one ion is a weak acid or base), calculate the and concentration of all species
in the solution, and/or infer the relative strengths of the weak acids or bases from given equilibrium concentrations.
[See SP 2.2, 6.4; Essential knowledge 6.C.1]
Learning objective 6.17 The student can, given an arbitrary mixture of weak and strong acids and bases (including
polyprotic systems), determine which species will react strongly with one another (i.e., with
) and what species
will be present in large concentrations at equilibrium. [See SP 6.4; Essential knowledge 6.C.1]
Learning objective 6.18 The student can design a buffer solution with a target and buffer capacity by selecting
an appropriate conjugate acid-base pair and estimating the concentrations needed to achieve the desired capacity.
[See SP 2.3, 4.2, 6.4; Essential knowledge 6.C.2]
Learning objective 6.19 The student can relate the predominant form of a chemical species involving a labile
proton (i.e., protonated/deprotonated form of a weak acid) to the of a solution and the
associated with the
labile proton. [See SP 2.3, 5.1, 6.4; Essential knowledge 6.C.2]
Learning objective 6.20 The student can identify a solution as being a buffer solution and explain the buffer
mechanism in terms of the reactions that would occur on addition of acid or base. [See SP 6.4; Essential
knowledge 6.C.2]
Learning objective 6.21 The student can predict the solubility of a salt, or rank the solubility of salts, given the
relevant values. [See SP 2.2, 2.3, 6.4; Essential knowledge 6.C.3]
Learning objective 6.22 The student can interpret data regarding solubility of salts to determine, or rank, the
relevant values. [See SP 2.2, 2.3, 6.4; Essential knowledge 6.C.3]
Learning objective 6.23 The student can interpret data regarding the relative solubility of salts in terms of factors
(common ions, ) that influence the solubility. [See SP 5.1, 6.4; Essential knowledge 6.C.3]
Learning objective 6.24 The student can analyze the enthalpic and entropic changes associated with the
dissolution of a salt, using particulate level interactions and representations. [See SP 1.4, 7.1; Essential
knowledge 6.C.3, connects to 5.E]
Learning objective 6.25 The student is able to express the equilibrium constant in terms of
and and use
this relationship to estimate the magnitude of K and, consequently, the thermodynamic favorability of the process.
[See SP 2.3; Essential knowledge 6.D.1]

105
Page 106 has been intentionally left blank
The Laboratory Investigations

A more student-directed, inquiry-based lab experience supports the AP Chemistry course
and AP Course Audit curricular requirements as it provides opportunities for students to
design experiments, collect data, apply mathematical routines and methods, and refine
testable explanations and predictions. The 2013 lab manual, AP Chemistry Guided-Inquiry
Experiments: Applying the Science Practices, supports the recommendation by the National
Science Foundation (NSF) that science teachers build into their curriculum opportunities
for students to develop skills in communication, teamwork, critical thinking, and
commitment to lifelong learning. This inquiry approach also allows you, the teacher, to
develop and use investigations you design based on your own experiences.
Teachers are expected to devote a minimum of 25 percent of instructional time to lab
investigations and to conduct at least 16 hands-on laboratory investigations to support
the learning objectives in the curriculum framework. Additionally, teachers are expected
to provide guided inquiry-based labs for at least six of the aforementioned 16 lab
investigations. In conducting lab investigations, students will be encouraged to engage in
the following:
Generate questions for investigation
Choose which variables to investigate
Design and conduct their own experimental procedures
Collect, analyze, interpret, and display data
Determine how to present their conclusions
Inquiry Instruction in the AP Science Classroom

AP inquiry instruction incorporates any teaching method that encourages students to
construct and/or discover knowledge with an understanding of how scientists study the
natural world. Inquiry teaching expands beyond lab investigations and field experiments
to include classroom experiences, such as scientific model development and revision
and peer-to-peer critique of explanations. The approach to inquiry instruction may
vary for investigations, field experiments, and classroom experiences, depending on the
science practices and content being developed, the amount of necessary content or skills
scaffolding, the extent of teacher involvement to support that scaffolding, and student
readiness.
Scientific inquiry experiences in the AP classroom should be designed and implemented
with increasing student involvement to help enhance inquiry learning. Adaptations of
Herrons approach (1971) and that of Rezba, Auldridge, and Rhea (1999) identify four
incremental levels of inquiry:

107
Confirmation: Students confirm a principle through an activity in which the results are
known in advance.
Structured: Students investigate a teacher-presented question through a prescribed
procedure.
Guided: Students investigate a teacher-presented question using student-designed/
selected procedures.
Open: Students investigate topic-related questions that are formulated through studentdesigned/selected procedures.
AP inquiry instruction focuses primarily on the continuum between guided inquiry and
open inquiry. Some structured inquiry may be required as students learn particular skills
needed to conduct more student-directed forms of inquiry. Student activities that support
the learning of science concepts through scientific inquiry in AP classrooms may include
reading about known scientific theories and ideas; generating scientifically oriented
questions; making predictions or posing preliminary hypotheses; planning investigations;
making observations; using tools to gather and analyze data; constructing explanations;
creating, critiquing, and revising models; engaging in scientific argumentation; reviewing
known theories and concepts in light of empirical data; and communicating the
results (National Research Council, 1996; Grady, 2010; Grandy and Duschl, 2007; and
Windschitl, 2008). For AP Chemistry, teachers are expected to engage students in guided
inquiry instead of open inquiry laboratory investigations.
Time and Resources

To qualify for accreditation by the American Chemical Society, college chemistry
departments typically schedule a weekly laboratory period of three hours. It is critical
that laboratory work be an important part of an AP Chemistry course so that the course
is comparable to a college general chemistry course. Analysis of data from AP Chemistry
examinees regarding the length of time they spent per week in the laboratory shows
that increased laboratory time is correlated with higher AP scores. Flexible or modular
scheduling must be implemented in order to meet the time requirements identified in the
course outline. At minimum, one double period a week is needed.
Furthermore, it is important that the AP Chemistry laboratory program be adapted to
local conditions and funding even while it aims to offer the students a well-rounded
experience with experimental chemistry. Adequate laboratory facilities should be
provided so that each student has a work space where equipment and materials can be left
overnight if necessary. Sufficient laboratory glassware for the anticipated enrollment and
appropriate instruments (sensitive balances, spectrophotometers, and
meters) should
be provided. Students in AP Chemistry should have access to computers with software
appropriate for processing laboratory data and writing reports. A laboratory assistant
should be provided in the form of a paid or unpaid aide.

108
Recommended Experiments
Since the AP Chemistry Exam directly assesses the learning objectives of the curriculum
framework, the inclusion in the course of appropriate experiments aligned with such
learning objectives is important for student success. The goal when selecting experiments
should be to provide students with the broadest laboratory experience possible.
Accordingly, teachers should engage students in performing a minimum of 16 handson laboratory investigations, with six of those investigations following a guided-inquiry
format. The traditional, teacher-directed labs that support the learning objectives of
the curriculum framework can still be used to satisfy the hands-on lab requirement.
However, teachers should ensure they choose six guided-inquiry labs out of the total
16 labs to be performed. Such labs should align with the learning objectives within the
curriculum framework, which directly point to students designing their own experiment
and engaging in the science practices of guided inquiry. To support the guided-inquiry lab
component of the AP Chemistry course, the following is a sample of learning objectives
pointing to students engagement in student-directed laboratory experiences in a guidedinquiry format:
Sample learning objectives supported by laboratory work
LO 1.16 The student can design and/or interpret the results of
an experiment regarding the absorption of light to determine the
concentration of an absorbing species in a solution. [See SP 4.2, 5.1]
LO 1.19 The student can design, and/or interpret data from, an
experiment that uses gravimetric analysis to determine the concentration
of an analyte in a solution. [See SP 4.2, 5.1, 6.4]
LO 1.20 The student can design, and/or interpret data from, an
experiment that uses titration to determine the concentration of an
analyte in a solution. [See SP 4.2, 5.1, 6.4]
LO 2.10 The student can design and/or interpret the results of a
separation experiment (filtration, paper chromatography, column
chromatography, or distillation) in terms of the relative strength of
interactions among and between the components. [See SP 4.2, 5.1, 6.4]
LO 2.22 The student is able to design or evaluate a plan to collect and/
or interpret data needed to deduce the type of bonding in a sample of a
solid. [See SP 4.2, 6.4]
LO 3.9 The student is able to design and/or interpret the results of an
experiment involving a redox titration. [See SP 4.2, 5.1]

109

experiment regarding the factors (i.e., temperature, concentration,
surface area) that may influence the rate of a reaction. [See SP 4.2, 5.1]
experiment in which calorimetry is used to determine the change in
enthalpy of a chemical process (heating/cooling, phase transition, or
chemical reaction) at constant pressure. [See SP 4.2, 5.1, 6.4]
LO 6.9 The student is able to use Le Chateliers principle to design a set
of conditions that will optimize a desired outcome, such as product yield.
[See SP 4.2]
LO 6.18 The student can design a buffer solution with a target
and
buffer capacity by selecting an appropriate conjugate acid-base pair and
estimating the concentrations needed to achieve the desired capacity.
[See SP 2.3, 4.2, 6.4]

110
Participating in the AP Course Audit
Participating in the AP Course

Audit
Schools wishing to offer AP courses must participate in the AP Course Audit.
Participation in the AP Course Audit requires the online submission of two documents:
the AP Course Audit form and the teachers syllabus. The AP Course Audit form is
submitted by the AP teacher and the school principal (or designated administrator) to
confirm awareness and understanding of the curricular and resource requirements. The
syllabus, detailing how course requirements are met, is submitted by the AP teacher for
review by college faculty.
The curricular and resource requirements, derived from the AP Chemistry curriculum
framework, are outlined below. Teachers should use these requirements in conjunction
with the AP Course Audit resources at www.collegeboard.org/apcourseaudit to support
syllabus development.
Curricular Requirements
Students and teachers use a recently published (within the last 10 years) collegelevel chemistry textbook.
The course is structured around the enduring understandings within the big ideas
as described in the AP Chemistry curriculum framework.
Students are provided with opportunities to meet the learning objectives within
each of the big ideas as described in the AP Chemistry curriculum framework.
These opportunities must occur in addition to those within laboratory
investigations.
The course provides students with the opportunity to connect their knowledge
of chemistry and science to major societal or technological components (e.g.,
concerns, technological advances, innovations) to help them become scientifically
literate citizens.
Students are provided the opportunity to engage in investigative laboratory work
integrated throughout the course for a minimum of 25 percent of instructional
time, which must include a minimum of 16 hands-on laboratory experiments
while using basic laboratory equipment to support the learning objectives listed
within the AP Chemistry curriculum framework.
The laboratory investigations used throughout the course allow students to apply
the seven science practices defined in the AP Chemistry curriculum framework.
At minimum, six of the required 16 labs are conducted in a guided-inquiry format.

111
The course provides opportunities for students to develop, record, and maintain
evidence of their verbal, written, and graphic communication skills through
laboratory reports, summaries of literature or scientific investigations, and oral,
written, and graphic presentations.
Resource Requirements
The school ensures that each student has a college-level chemistry textbook
published within the past 10 years.
The school ensures that the teacher has a copy of a college-level chemistry
textbook published within the past 10 years and other appropriate materials to
support instruction.
The school ensures that each student has access to the AP Chemistry GuidedInquiry Experiments: Applying the Science Practices or other inquiry-based or
student-directed lab activities that meet the objectives of those listed in the AP
Chemistry curriculum framework.
The school ensures that students have access to scientific equipment/materials,
all necessary resources, and adequate time to conduct college-level chemistry
laboratory investigations that meet the objectives as outlined in the AP Chemistry
curriculum framework and/or other inquiry-based or student-directed lab
activities that are listed in the teachers course syllabus.

112
Exam Information
Exam Information
The AP Chemistry Exam consists of two sections: multiple choice and free response.
Both sections include questions that assess the students understanding of the big ideas,
enduring understandings, and essential knowledge, and how they can be applied through
the science practices. These may include questions on the use of modeling to explain
chemistry principles, the use of mathematical processes to explain concepts, making
predictions and justifying phenomena, experimental design, and manipulation and
interpretation of data.
Starting with the 2015 exam, the exam will be 3 hours and 15 minutes long and include
both a 90-minute multiple-choice section and a 105-minute free-response section. The
multiple-choice section accounts for half of each students exam grade, and the freeresponse section accounts for the other half.
Section
I
II
Question Type
Multiple Choice
Long Free Response
Short Free Response
Number of Questions
60
3
4
Timing
90 minutes
105 minutes
Section I consists of 60 multiple-choice questions, either as discrete questions or question

sets, that represent the knowledge and science practices outlined in the AP Chemistry
curriculum framework, which students should understand and be able to apply. Question
sets are a new type of question: They provide a stimulus or a set of data and a series of
related questions.
Section II contains two types of free-response questions (short and long), and each
student will have a total of 105 minutes to complete all of the questions. Section II of the
exam will contain questions pertaining to experimental design, analysis of authentic lab
data and observations to identify patterns or explain phenomena, creating or analyzing
atomic and molecular views to explain observations, articulating and then translating
between representations, and following a logical/analytical pathway to solve a problem.
Students will be allowed to use a scientific calculator on the entire free-response section
of the exam. Additionally, students will be supplied with a periodic table of the elements
and a formula and constants chart to use on both the multiple-choice and free-response
sections of the exam.
The sample exam questions in this course and exam description represent the kinds of
questions that are included on the AP Chemistry Exam. The concepts, content, application
of science practices, and the level of difficulty in these sample questions are comparable to
what students will encounter on an actual AP Exam. As of the May 2014 administration
of the AP Chemistry Exam, multiple-choice questions contain four answer options,
rather than five. This change saves students valuable time without altering the rigor of the
exam in any way. A students total score on the multiple-choice section is based on the

113
number of questions answered correctly. Points are not deducted for incorrect answers or
unanswered questions.
Each sample multiple-choice and free-response question is followed by a box that shows
the questions alignment with the essential knowledge statements, science practices, and
learning objectives provided in the AP Chemistry curriculum framework. An answer key
to the multiple-choice questions can be found on page 135. The scoring guidelines for the
free-response questions can be found on page 142.
Calculators
The policy regarding the use of calculators on the AP Chemistry Exam was developed to
address the rapid expansion of the capabilities of scientific calculators, which include not
only programming and graphing functions but also the availability of stored equations
and other data. For the section of the exam during which calculators are permitted,
students should be allowed to use the calculators to which they are accustomed, except
as noted below.* On the other hand, they should not have access to information in their
calculators that is not available to other students, if that information is needed to answer
the questions. Therefore, calculators are not permitted on the multiple-choice section
of the AP Chemistry Exam.
The purpose of the multiple-choice section is to assess the breadth of students knowledge
and understanding of the basic concepts of chemistry. The multiple-choice questions
emphasize conceptual understanding as well as qualitative and simple quantitative
applications of principles. Many chemical and physical principles and relationships are
quantitative by nature and can be expressed as equations. Knowledge of the underlying basic
definitions and principles, expressed as equations, is a part of the content of chemistry that
should be learned by chemistry students and will be assessed in the multiple-choice section.
However, any numeric calculations that require use of these equations in the multiple-choice
section will be limited to simple arithmetic so that they can be done quickly, either mentally
or with paper and pencil. Also, in some questions the answer choices differ by several orders
of magnitude so that the questions can be answered by estimation. Students should be
encouraged to develop their skills in estimating answers and in recognizing answers that are
physically unreasonable or unlikely. Calculators (with the exceptions previously noted) will
be allowed only during the free-response section of the exam.
*Any programmable or graphing calculator may be used.
Equation Tables
Tables containing equations commonly used in chemistry will be provided for students to
use during the entire AP Chemistry Exam. In general, the equations for each years exam
are printed and distributed with the course description at least a year in advance so that
students can become accustomed to using them throughout the year. However, because
the equation tables will be provided with the exam, students will NOT be allowed to bring
their own copies to the exam room. The latest version of the equations and formulas list
is included in this course and exam description. One of the purposes of providing the
114
Exam Information
tables of commonly employed equations for use with the exam is to address the issue of
equity for those students who do not have access to equations stored in their calculators.
The availability of these equations to all students means that in the scoring of the exam,
little or no credit will be awarded for simply writing down equations or for answers
unsupported by explanations or logical development.
The equations in the tables express relationships that are encountered most frequently in
an AP Chemistry course and exam. However, they do not include all equations that might
possibly be used. For example, they do not include many equations that can be derived
by combining others in the tables. Nor do they include equations that are simply special
cases of any that are in the tables. Students are responsible for understanding the physical
principles that underlie each equation and for knowing the conditions in which each
equation is applicable. The equations are grouped in tables according to major content
category. Within each table, the symbols used for the variables in that table are defined.
However, in some cases the same symbol is used to represent different quantities in
different tables. It should be noted that there is no uniform convention among textbooks
for the symbols used in writing equations. The equation tables follow many common
conventions, but in some cases consistency was sacrificed for the sake of clarity. In
summary, the purpose of minimizing numerical calculations in both sections of the exam
and providing an equations table is to place greater emphasis on the understanding and
application of fundamental chemical principles and concepts. For solving problems and
writing essays, a sophisticated programmable or graphing calculator, or the availability of
stored equations, is no substitute for a thorough grasp of the chemistry involved.
Time Management
Students need to learn to budget their time to allow them to complete all parts of the
exam. Time left is announced by proctors, but students are not forced to move to the
next question, and they may not budget enough time to complete all the multiple-choice
questions in Section I and all of the free-response questions in Section II. Students
often benefit from taking a practice exam under timed conditions prior to the actual
administration.

115
How the Curriculum Framework Is Assessed

The following guidelines are presented to show teachers how the curriculum framework
is assessed on the exam:
All big ideas, enduring understandings, and essential knowledge components are
required and therefore must be taught in the AP Chemistry course. The learning
objectives should be used to guide teaching and learning.
The exam will assess the application of the science practices.
Questions on the AP Chemistry Exam will require a combination of specific
knowledge from the concept outline as well as its application through the science
practices.
For the free-response questions, students will be expected to provide appropriate
scientific evidence and reasoning to support their responses.
For the entire free-response section of the AP Chemistry Exam, students will be
allowed to use a scientific calculator.
To emphasize the application of quantitative skills and mathematical reasoning,
students will not be required to recall specific formulas. An equations and
formulas list will be provided within the exam materials.

116
Exam Information
Sample Multiple-Choice Questions

Section I Directions:
YOU MAY NOT USE YOUR CALCULATOR FOR SECTION I. YOU MAY USE THE
PERIODIC CHART AND EQUATIONS TABLE FOR THE ENTIRE EXAM.
Each of the questions or incomplete statements below is followed by four suggested
answers or completions. Select the answer that is best in each case and then fill in the
corresponding circle on the answer sheet.
Note: For all questions, assume that the temperature is
, the pressure is
, and solutions are aqueous unless otherwise specified.
1. A kinetics experiment is set up to collect the gas that is generated when a sample
of chalk, consisting primarily of solid
, is added to a solution of ethanoic
acid,
. The rate of reaction between
and
is
determined by measuring the volume of gas generated at
and
as a
function of time. Which of the following experimental conditions is most likely to
increase the rate of gas production?
(A)
Decreasing the volume of ethanoic acid solution used in the experiment
(B) Decreasing the concentration of the ethanoic acid solution used in the
experiment
(C)
Decreasing the temperature at which the experiment is performed
(D) Decreasing the particle size of the
by grinding it into a fine powder
Essential Knowledge
4.A.1 The rate of a reaction is influenced by the concentration or pressure of

reactants, the phase of the reactants and products, and environmental factors such as
temperature and solvent.
Science Practice
question.
Learning Objective
4.1 The student is able to design and/or interpret the results of an experiment
regarding the factors (i.e., temperature, concentration, surface area) that may
influence the rate of a reaction.

117
2. A
sample of a metal was heated to
and then quickly transferred to
an insulated container holding
of water at
. The temperature of the
water rose to reach a final temperature of
. Which of the following can be
concluded?
(A) The metal temperature changed more than the water temperature did;
therefore the metal lost more thermal energy than the water gained.
(B) The metal temperature changed more than the water temperature did, but
the metal lost the same amount of thermal energy as the water gained.
(C) The metal temperature changed more than the water temperature did;
therefore the heat capacity of the metal must be greater than the heat
capacity of the water.
(D) The final temperature is less than the average starting temperature of the
metal and the water; therefore the total energy of the metal and water
decreased.
Essential Knowledge
5.B.3 Chemical systems undergo three main processes that change their energy:
heating/cooling, phase transitions, and chemical reactions.
Science Practice
2.3 The student can estimate numerically quantities that describe natural
phenomena.
Learning Objective
5.6 The student is able to use calculations or estimations to relate energy changes
associated with heating/cooling a substance to the heat capacity, relate energy
changes associated with a phase transition to the enthalpy of fusion/vaporization,
relate energy changes associated with a chemical reaction to the enthalpy of the
reaction, and relate energy changes to
work.
3. Which of the following particulate diagrams best shows the formation of water
vapor from hydrogen gas and oxygen gas in a rigid container at
(A)
(B)

118
Exam Information
(C)
(D)
Essential Knowledge
1.E.1 Physical and chemical processes can be depicted symbolically; when this is
done, the illustration must conserve all atoms of all types.
Science Practice
Learning Objective
1.17 The student is able to express the law of conservation of mass quantitatively and
qualitatively using symbolic representations and particulate drawings.
Questions 47 refer to the following.
A
sample of an acid,
, of unknown molarity is titrated, and the
of the
resulting solution is measured with a
meter and graphed as a function of the volume
of
added.

119
4. At point R in the titration, which of the following species has the highest
concentration?
(A)
(B)
(C)
(D)
Essential Knowledge
6.C.2 The pH is an important characteristic of aqueous solutions that can be

controlled with buffers. Comparing pH to
allows one to determine the
protonation state of a molecule with a labile proton.
Science Practice
Learning Objective
6.19 The student can relate the predominant form of a chemical species involving
a labile proton (i.e., protonated/deprotonated form of a weak acid) to the pH of a
solution and the
associated with the labile proton.
5. Which of the following is the best particulate representation of the species (other
than
) that are present in significant concentrations in the solution at point U
in the titration?
(A)
(B)

120
Exam Information
(C)
(D)
Big Idea
3 Changes in matter involve the rearrangement and/or reorganization of atoms and/

or the transfer of electrons.
Science Practice
7.1 The student can connect phenomena and models across spatial and temporal
scales.
Learning Objective
3.1 Students can translate among macroscopic observations of change, chemical

equations, and particle views.
6. At which point on the titration curve is

(A)
(B)
(C)
(D)
closest to twice that of
Essential Knowledge
6.C.1 Chemical equilibrium reasoning can be used to describe the proton-transfer

reactions of acid-base chemistry.
Science Practice
Learning Objective
6.13 The student can interpret titration data for monoprotic or polyprotic acids
involving titration of a weak or strong acid by a strong base (or a weak or strong
base by a strong acid) to determine the concentration of the titrant and the
for a
weak acid, or the
for a weak base.

121
7. A student carries out the same titration but uses an indicator instead of a
meter. If the indicator changes color slightly past the equivalence point, what will
the student obtain for the calculated concentration of the acid?
(A)
Slightly less than
(B)
Slightly more than
(C)
Slightly less than
(D)
Slightly more than
Essential Knowledge
1.E.2 Conservation of atoms makes it possible to compute the masses of substances

involved in physical and chemical processes. Chemical processes result in the
formation of new substances, and the amount of these depends on the number and
the types and masses of elements in the reactants, as well as the efficiency of the
transformation.
Science Practice
Learning Objective
1.20 The student can design, and/or interpret data from, an experiment that uses
titration to determine the concentration of an analyte in a solution.
Questions 810 refer to three gases in identical rigid containers under the conditions
given in the table below.
Container
Gas
Methane
Ethane
Butane
Formula
Molar mass
16
30.
58
Temperature
27
27
27
Pressure
2.0
4.0
2.0
8. The average kinetic energy of the gas molecules is

(A)
greatest in container A
(B)
greatest in container B
(C)
greatest in container C
(D)
the same in all three containers

122
Exam Information
Essential Knowledge
5.A.1 Temperature is a measure of the average kinetic energy of atoms and

molecules.
Science Practices
Learning Objective
5.2 The student is able to relate temperature to the motions of particles, either via
particulate representations, such as drawings of particles with arrows indicating
velocities, and/or via representations of average kinetic energy and distribution of
kinetic energies of the particles, such as plots of the Maxwell-Boltzmann distribution.
9. The density of the gas, in
, is
(A)
greatest in container A
(B)
greatest in container B
(C)
greatest in container C
(D)
the same in all three containers
Essential Knowledge
2.A.2 The gaseous state can be effectively modeled with a mathematical equation
relating various macroscopic properties. A gas has neither a definite volume nor a
definite shape; because the effects of attractive forces are minimal, we usually assume
Science Practice
phenomena.
Learning Objective
2.6 The student can apply mathematical relationships or estimation to determine

macroscopic variables for ideal gases.
10. If the pressure of each gas is increased at constant temperature until condensation
occurs, which gas will condense at the lowest pressure?
(A) Methane
(B) Ethane
(C) Butane
(D)
All the gases will condense at the same pressure.
Essential Knowledge
2.B.1 London dispersion forces are attractive forces present between all atoms and
molecules. London dispersion forces are often the strongest net intermolecular force
between large molecules.
Science Practice
Learning Objective
2.11 The student is able to explain the trends in properties and/or predict properties
of samples consisting of particles with no permanent dipole on the basis of London
dispersion forces.

123
Questions 1115 refer to the following.
decomposes into
and
according to the equation above. A pure
sample of
is placed in a rigid, evacuated
container. The initial pressure
of the
is
. The temperature is held constant until the
reaches
equilibrium with its decomposition products. The figures below show the initial and
equilibrium conditions of the system.
11. Which of the following is the most likely cause for the increase in pressure
observed in the container as the reaction reaches equilibrium?
(A) A decrease in the strength of intermolecular attractions among molecules
in the flask
(B) An increase in the strength of intermolecular attractions among molecules
in the flask
(C) An increase in the number of molecules, which increases the frequency of
collisions with the walls of the container
(D) An increase in the speed of the molecules that then collide with the walls
of the container with greater force
Essential Knowledge
2.A.2 The gaseous state can be effectively modeled with a mathematical equation
relating various macroscopic properties. A gas has neither a definite volume nor a
definite shape; because the effects of attractive forces are minimal, we usually assume
Science Practice
Learning Objective
2.4 The student is able to use KMT and concepts of intermolecular forces to make
predictions about the macroscopic properties of gases, including both ideal and
nonideal behaviors.

124
Exam Information
12. As the reaction progresses toward equilibrium, the rate of the forward reaction
(A) increases until it becomes the same as the reverse reaction rate at
equilibrium
(B)
stays constant before and after equilibrium is reached
(C)
decreases to become a constant nonzero rate at equilibrium
(D)
decreases to become zero at equilibrium
Essential Knowledge
6.A.3 When a system is at equilibrium, all macroscopic variables, such as

concentrations, partial pressures, and temperature, do not change over time.
Equilibrium results from an equality between the rates of the forward and reverse
.
Science Practice
Learning Objective
6.3 The student can connect kinetics to equilibrium by using reasoning about
equilibrium, such as Le Chateliers principle, to infer the relative rates of the forward
and reverse reactions.
13. If the decomposition reaction were to go to completion, the total pressure in the
container will be
(A)
(B)
(C)
(D)
Essential Knowledge
3.A.2 Quantitative information can be derived from stoichiometric calculations

that utilize the mole ratios from the balanced chemical equations. The role of
stoichiometry in real-world applications is important to note, so that it does not
Science Practice
phenomena.
Learning Objective
3.3 The student is able to use stoichiometric calculations to predict the results
of performing a reaction in the laboratory and/or to analyze deviations from the
expected results.
14. Which of the following statements about

reaction, is correct?
, the equilibrium constant for the
(A)
(B)
(C)
(D) It cannot be determined whether
additional information.
, or
without

125
Essential Knowledge

.
Science Practice
phenomena.
Learning Objective
6.5 The student can, given data (tabular, graphical, etc.) from which the state of a
system at equilibrium can be obtained, calculate the equilibrium constant, K.
15. Additional
is injected into the system at equilibrium. Which of the
following graphs best shows the rate of the reverse reaction as a function of
time? (Assume that the time for injection and mixing of the additional
negligible.)
is
(A)
(B)
(C)
(D)

126
Exam Information
Essential Knowledge

.
Science Practice
Learning Objective
6.3 The student can connect kinetics to equilibrium by using reasoning about
equilibrium, such as Le Chateliers principle, to infer the relative rates of the forward
and reverse reactions.
Questions 1620
The elements K and react directly to form the compound

according to the
equation above. Refer to the information above and the table below to answer the
questions that follow.
16. How much heat is released or absorbed when

?
(A)
is released
(B)
is released
(C)
is absorbed
(D)
is absorbed
mol of
is formed from
Essential Knowledge
5.B.3 Chemical systems undergo three main processes that change their energy:
heating/cooling, phase transitions, and chemical reactions.
Science Practices
phenomena.
phenomena.
Learning Objective
5.6 The student is able to use calculations or estimations to relate energy changes
associated with heating/cooling a substance to the heat capacity, relate energy
changes associated with a phase transition to the enthalpy of fusion/vaporization,
relate energy changes associated with a chemical reaction to the enthalpy of the
reaction, and relate energy changes to
work.

127
17. What remains in the reaction vessel after equal masses of

and
have
reacted until either one or both of the reactants have been completely consumed?
(A)
only
(B)
and K only
(C)
and
(D)
, K, and
only
Essential Knowledge
3.A.2 Quantitative information can be derived from stoichiometric calculations

that utilize the mole ratios from the balanced chemical equations. The role of
stoichiometry in real-world applications is important to note, so that it does not
Science Practice
phenomena.
Learning Objective
3.4 The student is able to relate quantities (measured mass of substances, volumes of
solutions, or volumes and pressures of gases) to identify stoichiometric relationships
for a reaction, including situations involving limiting reactants and situations in
which the reaction has not gone to completion.
18. Which of the values of

for a process in the table is (are) less than zero (i.e.,
indicate(s) an exothermic process)?
(A)
z only
(B)
y and z only
(C)
x, y, and z only
(D)
w, x, y, and z
Essential Knowledge/
Enduring Understanding
5.D Electrostatic forces exist between molecules as well as between atoms or ions,
and breaking the resultant intermolecular interactions requires energy.
Science Practice
phenomena.
Learning Objective
5.8 The student is able to draw qualitative and quantitative connections between
the reaction enthalpy and the energies involved in the breaking and formation of
chemical bonds.

128
Exam Information
19. It is observed that the reaction producing

from its elements goes essentially to
completion. Which of the following is a true statement about the thermodynamic
favorability of the reaction?
(A)
The reaction is favorable and driven by an enthalpy change only.
(B)
The reaction is unfavorable and driven by an entropy change only.
(C)
The reaction is favorable and driven by both enthalpy and entropy changes.
(D)
The reaction is unfavorable due to both enthalpy and entropy changes.
Essential Knowledge
5.E.2 Some physical or chemical processes involve both a decrease in the internal
energy of the components
under consideration and an increase in
the entropy of those components
. These processes are necessarily
thermodynamically favored
.
Science Practice
Learning Objective
5.13 The student is able to predict whether or not a physical or chemical process
is thermodynamically favored by determination of (either quantitatively or
qualitatively) the signs of both
and
, and calculation or estimation of
when needed.
20.
Which of the following expressions is equivalent to
represented above?
for the reaction
(A)
(B)
(C)
(D)
Essential Knowledge
5.C.2 The net energy change during a reaction is the sum of the energy required
to break the bonds in the reactant molecules and the energy released in forming
the bonds of the product molecules. The net change in energy may be positive for
endothermic reactions where energy is required, or negative for exothermic reactions
where energy is released.
Science Practice
scales.
Learning Objective
5.8 The student is able to draw qualitative and quantitative connections between
the reaction enthalpy and the energies involved in the breaking and formation of
chemical bonds.

129
21. N2 molecules absorb ultraviolet light but not visible light. molecules absorb
both visible and ultraviolet light. Which of the following statements explains the
observations?
(A) More energy is required to make
make molecules vibrate.
molecules vibrate than is required to
(B) More energy is required to remove an electron from an

required to remove an electron from a molecule.
molecule than is
(C) Visible light does not produce transitions between electronic energy levels
in the molecule but does produce transitions in the molecule.
(D)
The molecular mass of
is greater than the molecular mass of
Essential Knowledge
1.D.3 The interaction of electromagnetic waves or light with matter is a powerful

means to probe the structure of atoms and molecules and to measure their
concentration.
Science Practice
4.1 The student can justify the selection of the kind of data needed to answer a
particular scientific question.
Learning Objective
1.15 The student can justify the selection of a particular type of spectroscopy to
measure properties associated with vibrational or electronic motions of molecules.
22.
Element
Common
Oxidation
State
Metallic
Melting
Radius (pm) Point
144
128
144
1064
1085
961
To make Au stronger and harder, it is often alloyed with other metals, such as
and . Consider two alloys, one of
and Cu and one of Au and , each with
the same mole fraction of . If the / alloy is harder than the / alloy,
then which of the following is the best explanation based on the information in
the table above?
(A)
has two common oxidation states, but
(B) has a higher melting point than

point than
has.
has only one.
has, but
has a lower melting
(C) atoms are smaller than

atoms, thus they interfere more with the
displacement of atoms in the alloy.
(D) atoms are less polarizable than are
interparticle forces.
or
atoms, thus
has weaker

130
Exam Information
Essential Knowledge
2.D.2 Metallic solids are good conductors of heat and electricity, have a wide range of
melting points, and are shiny, malleable, ductile, and readily alloyed.
Science Practice
Learning Objective
2.25 The student is able to compare the properties of metal alloys with their
constituent elements to determine if an alloy has formed, identify the type of alloy
formed, and explain the differences in properties using particulate level reasoning.
23.

The photoelectron spectra above show the energy required to remove a 1s
electron from a nitrogen atom and from an oxygen atom. Which of the following
statements best accounts for the peak in the upper spectrum being to the right of
the peak in the lower spectrum?
(A)
Nitrogen atoms have a half-filled p subshell.
(B) There are more electron-electron repulsions in oxygen atoms than in

nitrogen atoms.
(C) Electrons in the p subshell of oxygen atoms provide more shielding than
electrons in the p subshell of nitrogen atoms.
(D)
Nitrogen atoms have a smaller nuclear charge than oxygen atoms.
Essential Knowledge
1.B.1 The atom is composed of negatively charged electrons, which can leave the
atom, and a positively charged nucleus that is made of protons and neutrons. The
attraction of the electrons to the nucleus is the basis of the structure of the atom.
Coulombs law is qualitatively useful for understanding the structure of the atom.
Science Practice
6.2 The student can construct explanations of phenomena based on evidence

produced through scientific practices.
Learning Objective
1.5 The student is able to explain the distribution of electrons in an atom or ion
based upon data.

131
24.
Consider the molecules represented above and the data in the table below.
Molecular
Formula
Compound
Molar Mass
Boiling Point
Nonane
128
151
2,3,4-trifluoropentane
126
89
Nonane and 2,3,4-trifluoropentane have almost identical molar masses, but

nonane has a significantly higher boiling point. Which of the following statements
best helps explain this observation?
(A) The
is easier to break than the
(B) The
is more polar than the
.
.
(C) The carbon chains are longer in nonane than they are in
2,3,4-trifluoropentane.
(D) The carbon chains are farther apart in a sample of nonane than they are in
2,3,4-trifluoropentane.
Essential Knowledge
2.B.3 Intermolecular forces play a key role in determining the properties of

substances, including biological structures and interactions.
Science Practice

Learning Objective
2.16 The student is able to explain the properties (phase, vapor pressure, viscosity,
etc.) of small and large molecular compounds in terms of the strengths and types of
intermolecular forces.

132
Exam Information
25.
Boiling Point
1695
3600
O2
Ionic Radius
(pm)
76
72
133
181
140
Based on the data in the tables above, which of the following statements provides
the best prediction for the boiling point of
?
(A) will have a lower boiling point than
attractions are weaker in
than in
.
because the coulombic
(B) will have a boiling point between that of

and
because the
covalent character of the bonds in
is intermediate between that of
and
.
(C) will have a higher boiling point than
spaced farther apart in
.
because the ions are
(D) will have a higher boiling point than

because the energy
required to transfer electrons from the anion to the cation is larger in
than in
.
Big Idea
2 Chemical and physical properties of materials can be explained by the structure

and the arrangement of atoms, ions, or molecules and the forces between them.
Science Practice
scales.
Learning Objective
2.1 Students can predict properties of substances based on their chemical formulas
and provide explanations of their properties based on particle views.

133
26.
A sample of
was placed in an evacuated container, and the reaction
represented above occurred. The value of
, the partial pressure of
was measured during the reaction and recorded in the table below.
Time (min)
0
150
5.0
0.0067
100
75
4.3
0.013
200
38
3.6
0.027
300
19
2.9
0.053
Which of the following correctly describes the reaction?

(A)
The decomposition of
is a zero-order reaction.
(B)
is a first-order reaction.
(C)
is a second-order reaction.
(D)
The overall reaction order is 3.
Essential Knowledge
4.A.2 The rate law shows how the rate depends on reactant concentrations.
Science Practice
Learning Objective
4.2 The student is able to analyze concentration versus time data to determine the
rate law for a zeroth-, first-, or second-order reaction.

134
Exam Information
Answers to Multiple-Choice Questions

1. D
9. B
17. C
25. A
2. B
10. C
18. B
26. B
3. C
11. C
19. A
4. A
12. C
20. C
5. B
13. B
21. C
6. C
14. B
22. C
7. B
15. B
23. D
8. D
16. C
24. C

135
Sample Free-Response Questions

Section II Directions: Question 1 is a long constructed-response question that should
require about 20 minutes to answer. Questions 2, 3, and 4 are short constructed-response
questions that should require about 7 minutes each to answer. Read each question carefully
and write your response in the space provided following each question. Your responses to
these questions will be scored on the basis of the accuracy and relevance of the information
cited. Explanations should be clear and well organized. Specific answers are preferable
to broad, diffuse responses. For calculations, clearly show the method used and the steps
involved in arriving at your answers. It is to your advantage to do this, since you may obtain
partial credit if you do and you will receive little or no credit if you do not.
1. A student performs an experiment in which the conductivity of a solution

of
is monitored as the solution is titrated with
. The
original volume of the
solution is
. A precipitate of
formed during the titration. The data collected
from the experiment are plotted in the graph above.
(a) As the first
of
are added to the
solution,
two types of chemical reactions occur simultaneously. On the lines
provided below, write the balanced net-ionic equations for (i) the
neutralization reaction and (ii) the precipitation reaction.

(i)
Equation for neutralization reaction:
(ii)
Equation for precipitation reaction:
(b) The conductivity of the

solution decreases as the volume of
added
changes from
to
.

136
Exam Information
(i) Identify the chemical species that enable the solution to conduct
electricity as the first
of
are added.
(ii) On the basis of the equations you wrote in part (a), explain why the
conductivity decreases.
(c) Using the information in the graph, calculate the molarity of the original
solution.
(d) Calculate the concentration of
point (after exactly
of
in the solution at the equivalence

are added).
(e) The concentration of

in the solution decreases as the volume of
added
increases from
to
. Explain.
Big Idea
1.E.2 Conservation of atoms makes it possible to compute the masses of substances

involved in physical and chemical processes. Chemical processes result in the
formation of new substances, and the amount of these depends on the number and
the types and masses of elements in the reactants, as well as the efficiency of the
transformation.
Big Idea 3 Changes in matter involve the rearrangement and/or reorganization of
atoms and/or the transfer of electrons.
3.A.1 A chemical change may be represented by a molecular, ionic, or net ionic
equation.
6.C.3 The solubility of a substance can be understood in terms of chemical
equilibrium.
Science Practices
question.
scales.
Learning Objectives
1.19 The student can design, and/or interpret data from, an experiment that uses
gravimetric analysis to determine the concentration of an analyte in a solution.
3.1 Students can translate among macroscopic observations of change, chemical
equations, and particle views.
3.2 The student can translate an observed chemical change into a balanced chemical
equation and justify the choice of equation type (molecular, ionic, or net ionic) in
terms of utility for the given circumstances.
6.23 The student can interpret data regarding the relative solubility of salts in terms
of factors (common ions, pH) that influence the solubility.

137
2.
It is proposed that the reaction represented above proceeds via the mechanism
represented by the two elementary steps shown below.
(a) Step I of the proposed mechanism involves the collision between

and molecules. This step is slow even though such collisions occur very
frequently in a mixture of
and
. Consider a specific collision
between a molecule of
and a molecule of .

(i) One factor that affects whether the collision will result in a reaction
is the magnitude of the collision energy. Explain.
(ii) Identify and explain one other factor that affects whether the
collision will result in a reaction.
(b) Consider the following potential rate laws for the reaction. Circle the rate
law below that is consistent with the mechanism proposed above. Explain
the reasoning behind your choice in terms of the details of the elementary
steps of the mechanism.

Enduring Understanding

4.B.1 Elementary reactions can be unimolecular or involve collisions between two or
more molecules.
4.B.2 Not all collisions are successful. To get over the activation energy barrier,
the colliding species need sufficient energy. Also, the orientations of the reactant
molecules during the collision must allow for the rearrangement of reactant bonds to
form product bonds.
4.C Many reactions proceed via a series of elementary reactions.
Science Practices

6.5 The student can evaluate alternative scientific explanations.
scales.
Learning Objectives
4.4 The student is able to connect the rate law for an elementary reaction to the
frequency and success of molecular collisions, including connecting the frequency
and success to the order and rate constant, respectively.
4.5 The student is able to explain the difference between collisions that convert
reactants to products and those that do not in terms of energy distributions and
molecular orientation.
4.7 The student is able to evaluate alternative explanations, as expressed by reaction
mechanisms, to determine which are consistent with data regarding the overall
rate of a reaction, and data that can be used to infer the presence of a reaction
intermediate.

138
Exam Information
3. The structures of a water molecule and a crystal of

are represented above.
A student prepares a
solution by dissolving 4.2 g of
in enough water
to make
of solution.
(a) In the space provided below, show the interactions of the components of
by making a drawing that represents the different particles present
in the solution. Base the particles in your drawing on the particles shown
in the representations above. Include only one formula unit of
and no
more than 10 molecules of water. Your drawing must include the following
details.

identity of ions (symbol and charge)

the arrangement and proper orientation of the particles in the
solution
(b) The student passes a direct current through the solution and observes
that chlorine gas is produced at the anode. Identify the chemical species
produced at the cathode and justify your answer using the information

139
Essential Knowledge
2.A.3 Solutions are homogenous mixtures in which the physical properties are
dependent on the concentration of the solute and the strengths of all interactions
among the particles of the solutes and solvent.
3.C.3 Electrochemistry shows the interconversion between chemical and electrical
energy in galvanic and electrolytic cells.
Science Practices
Learning Objectives
2.8 The student can draw and/or interpret representations of solutions that show the
interactions between the solute and solvent.
3.13 The student can analyze data regarding galvanic or electrolytic cells to identify
properties of the underlying redox reactions.
4.
The indicator HIn is a weak acid with a
value of 5.0. It reacts with water as
represented in the equation above. Consider the two beakers below. Each beaker
has a layer of colorless oil (a nonpolar solvent) on top of a layer of aqueous buffer
solution. In beaker X the pH of the buffer solution is 3, and in beaker Y the pH
of the buffer solution is 7. A small amount of
is placed in both beakers. The
mixtures are stirred well, and the oil and water layers are allowed to separate.
(a) What is the predominant form of

in the aqueous buffer in beaker Y,
the acid form or the conjugate base form? Explain your reasoning.
(b) In beaker X the oil layer is yellow, whereas in beaker Y the oil layer is
colorless. Explain these observations in terms of both acid-base equilibria
and interparticle forces.

140
Exam Information
Essential Knowledge
2.B.3 Intermolecular forces play a key role in determining the properties of

substances, including biological structures and interactions.
6.C.2: The pH is an important characteristic of aqueous solutions that can be
controlled with buffers. Comparing pH to pKa allows one to determine the
protonation state of a molecule with a labile proton.
Science Practices
phenomena.
Learning Objectives
2.15 The student is able to explain observations regarding the solubility of ionic
solids and molecules in water and other solvents on the basis of particle views that
include intermolecular interactions and entropic effects.
6.19 The student can relate the predominant form of a chemical species involving
a labile proton (i.e., protonated/deprotonated form of a weak acid) to the pH of a
solution and the pKa associated with the labile proton.

141
Scoring Guidelines
Scoring Guidelines for Free-Response Question 1 (10 points)
A student performs an experiment in which the conductivity of a solution of

is monitored as the solution is titrated with
. The original volume of the
solution is
. A precipitate of
formed during the
titration. The data collected from the experiment are plotted in the graph above.
(a) As the first
of
are added to the
solution,
two types of chemical reactions occur simultaneously. On the lines
provided below, write the balanced net-ionic equations for (i) the
neutralization reaction and (ii) the precipitation reaction.

(i)
Equation for neutralization reaction:
(ii)
Equation for precipitation reaction:

1 point is earned for each correct product.
1 point is earned for the correct reactants
with atoms and charges balanced in both
reactions.
(b) The conductivity of the

changes from

solution decreases as the volume of added

to
.
(i) Identify the chemical species that enable the solution to conduct
electricity as the first
of
are added.
and/or
1 point is earned for either ion.

142
Exam Information
(ii) On the basis of the equations you wrote in part (a), explain why the
conductivity decreases.
As the titration proceeds before the
equivalence point,
1 point is earned for each correct

explanation.
ions are removed from solution

by the precipitation reaction, and
Note: Response must refer to both

reactions for full credit.
ions are removed from solution

by the neutralization reaction.
(c) Using the information in the graph, calculate the molarity of the original
solution.
1 point is earned
for the correct
determination of the
number of moles of
titrant added at the
equivalence point
(can be implicit).
1 point is earned for
the correct calculation
of the original
concentration of
.
(d) Calculate the concentration of
point (after exactly
of
in the solution at the equivalence

are added).
1 point is earned for the correct
calculation based on .
(e) The concentration of

in the solution decreases as the volume of
added
increases from
to
. Explain.

143
Because of the common ion effect,

adding sulfate ions to an equilibrium
reaction involving sulfate ions will cause
the reaction to consume the added ions
as a new equilibrium is established.
Consequently, more
is formed,
causing the
concentration to
decrease.
1 point is earned for a correct explanation,

which must use an equilibrium argument
(for example, citing the common ion effect
or Le Chateliers principle) rather than a
stoichiometric argument.
Scoring Guidelines for Free-Response Question 2: (4 points)

It is proposed that the reaction represented above proceeds via the mechanism
represented by the two elementary steps shown below.
(a) Step I of the proposed mechanism involves the collision between

and molecules. This step is slow even though such collisions occur very
frequently in a mixture of
and
. Consider a specific collision
between a molecule of
and a molecule of .

(i) One factor that affects whether the collision will result in a reaction
is the magnitude of the collision energy. Explain.
Successful molecular collisions must have

sufficient energy in order to result in
reaction. Only collisions with sufficient
energy to overcome the activation energy
barrier, , will be able to reach the
transition state and begin to break the
bond.

1 point is earned for a correct explanation

that makes reference to the activation
energy of the reaction.
(ii) Identify and explain one other factor that affects whether the
collision will result in a reaction.

144
Exam Information
For a collision to be successful, the

molecules must have the correct
orientation.
1 point is earned for identifying the relative

orientation of the colliding molecules.
1 point is earned for an explanation that

Only collisions with the correct orientation makes reference to specific parts (atoms or
will be able to begin to form an
bond bonds) of the reacting molecules.
and begin to break an
bond as the
transition state is approached (that is, the
molecules must contact each other at very
specific locations on their surfaces for the
transition state to be accessible).
(b) Consider the following potential rate laws for the reaction. Circle the rate
law below that is consistent with the mechanism proposed above. Explain
the reasoning behind your choice in terms of the details of the elementary
steps of the mechanism.

The rate law that is consistent with the

mechanism is the one on the right above
.
Step I is the slower step and the ratedetermining step in the mechanism. Since
Step I is an elementary reaction, its rate
law is given by the stoichiometry of the
reacting molecules,
.
1 point is earned for identifying the correct

rate law with a proper explanation.
The explanation must correlate the overall
rate law with the rate law derived from
the stoichiometry of the slow step in the
mechanism).
Note: A statement relating the coefficients
of the reactants in Step I to the exponents
in the rate law indicates a correct
understanding.

145
The structures of a water molecule and a crystal of

are represented above. A
student prepares a
solution by dissolving 4.2 g of LiCl(s) in enough water to make
of solution.
(a) In the space provided below, show the interactions of the components of
by making a drawing that represents the different particles present
in the solution. Base the particles in your drawing on the particles shown
in the representations above. Include only one formula unit of
and no
more than 10 molecules of water. Your drawing must include the following
details.

identity of ions (symbol and charge)
the arrangement and proper orientation of the particles in the solution

146
Exam Information
The sketch should clearly show:

1. a clear representation of at least one
ion and one
ion separated from
each other, labeled, and charged;
2. each ion surrounded by at least two
molecules; and
3. molecules with the proper
orientation around each ion (i.e., the
oxygen end of the water molecules
closer to the lithium ion and the
hydrogen end of the water molecules
closer to the chloride ion).
1 point is earned for a correctly drawn

and labeled particulate representation of
the ions. (Representation must indicate
that the smaller ion is . Representations
that include more than one formula unit
of
(dissolved or undissolved) are
acceptable as long as at least one of them is
separated, labeled, and charged.)
1 point is earned for a correctly drawn
particulate representation of water
molecules of hydration surrounding the
ions.
1 point is earned for correctly representing
the orientation of the water molecules of
hydration with the proper polarity.
(b) The student passes a direct current through the solution and observes
that chlorine gas is produced at the anode. Identify the chemical species
produced at the cathode and justify your answer using the information
The hydrogen atoms in

are reduced
to at the cathode because this reaction
has a higher (more favorable or less
negative) standard reduction potential
than the reduction of lithium ions to
.
1 point is earned for correctly identifying

either of the chemical species produced at
the cathode with the proper justification.
Note: The justification must clearly
indicate that higher means less
negative. A lower magnitude negative
value also earns the point.

147

The indicator
is a weak acid with a
value of 5.0. It reacts with water as represented
in the equation above. Consider the two beakers below. Each beaker has a layer of
colorless oil (a nonpolar solvent) on top of a layer of aqueous buffer solution. In beaker
X the pH of the buffer solution is 3, and in beaker Y the pH of the buffer solution is 7. A
small amount of
is placed in both beakers. The mixtures are stirred well, and the oil
and water layers are allowed to separate.
(a) What is the predominant form of

in the aqueous buffer in beaker Y,
the acid form or the conjugate base form? Explain your reasoning.
The conjugate base form,
, is the
predominant form of the indicator in the
aqueous
buffer in beaker Y. This is
because the pH is greater than the
of
HIn, causing the equilibrium to form a
significant amount of products,
and
.
1 point is earned for correctly identifying

as the predominant form in the
aqueous layer of beaker Y because the
solution is not acidic (may be implicit).
1 point is earned for stating that
and that this causes the equilibrium to
favor products.
(b) In beaker X the oil layer is yellow, whereas in beaker Y the oil layer is
colorless. Explain these observations in terms of both acid-base equilibria
and interparticle forces.

148
Exam Information
At
the acid form,
,
predominates in the aqueous layer of
beaker X because
. Since
is a neutral molecule, some of it can
dissolve in the oil layer of beaker X because
of London dispersion interactions with the
oil, causing the oil layer to be yellow.
Since
is charged, it will
preferentially dissolve in the aqueous
layer of beaker Y because of ion-dipole
interactions with the water, leaving the oil
layer colorless.
1 point is earned for explaining the yellow

color in the oil layer of beaker X in terms
of acid-base equilibrium and interparticle
forces between
molecules and oil
molecules.
1 point is earned for explaining the
colorless oil layer of beaker Y in terms of
interparticle forces between
ions and
water molecules.

149
Appendix A: Preparing Students

for Success in AP Chemistry
In order to provide teachers with the information they need to incorporate the science
practices and required course concepts into the AP Chemistry classroom, this section
includes a description of desired performance (what students should know and be able
to do) for high achievement in an introductory college-level chemistry course (which is
comparable to an AP Chemistry course).

150
Appendix A
Competence
Mastery
Big Idea 1: Atomic Structure

Periodicity
Uses the shell structure of the

atom to determine electron
configurations and relates
these to the structure of the
periodic table. Communicates
the form and basic
consequences of Coulombs
law. Recounts the shape of the
s and p atomic orbitals.
Portrays the properties

of atoms and/or binary
compounds by recounting
periodic trends. Analyzes
elementary atomic data/
properties through the
context of the shell model
of the atom. States what
evidence regarding the atom
requires shifts between
different models of the atom.
Given a set of data, delineates

periodic trends, or deviations
from periodicity, using
Coulombs law, including
electron shielding and the
concept of effective nuclear
charge. Uses the concept
of periodicity in predicting
reactivity and properties of
binary compounds. Explains
the agreement between data
and various models of the
atom, and explains how this
influences the utility of a
particular model.
Spectroscopy
States the types of molecular

motions that are related
to the different spectral
ranges. Applies Beers law to
determine the concentration
of an absorbing species in
a solution. Uses Plancks
equation to calculate
energy of a photon. Uses
conservation of energy to
connect energy of the photon
to the energies involved in
the processes induced by the
photon.
Justifies the choice of a

particular type of spectroscopy
to probe a target aspect of a
molecule. Analyzes data from a
spectroscopy experiment using
Beers law. Communicates
the basic structure of a
spectroscopy experiment (i.e.,
electromagnetic radiation
[light] of different wavelengths
is passed through a system,
and the amount absorbed or
emitted is measured). Relates
mass spectra to abundances of
the relevant chemical species.
Designs an experiment
involving spectroscopy to
quantify the concentration/
amount of a substance.
Interprets data in which
spectroscopy is used for
qualitative analysis (e.g.,
connecting the data to
symbolic representations,
such as electron
configurations, or affirming
that spectral patterns often
indicate the presence of a
particular functional group).
Stoichiometry
Uses the mole concept

to connect quantities
between the macroscopic
and particulate levels,
both quantitatively and
qualitatively. Performs
routine stoichiometric
computations of reactants to
products, including balancing
an equation. Successfully
communicates and flexibly
uses different measures of
a substance (e.g., volume,
mass, concentration, density).
Recognizes connections
between macroscopiclevel and particulate-level
representations.
States the utility of the mole

to connect measurements
made at the macroscopic
level to the particulate level.
Applies conservation of
number of atoms to analyze
systems both quantitatively
and qualitatively. Interprets
experiments designed to
determine concentration
and composition, such as
gravimetric analysis, titrations,
and Beers law. Compares
isotopic distributions to the
average atomic mass, both
qualitatively and quantitatively.
Translates between different
representations related to
amounts and concentrations,
including macroscopiclevel data and particulatelevelviews.
Uses stoichiometric
reasoning in situations that
involve impure substances.
Designs experiments to
determine concentration,
composition, and identity
of a substance. Generates
appropriate representations of
chemical mixtures, including
macroscopic-level and
particulate-level views.

151
Competence
Mastery
Big Idea 2: StructureProperty Relations

Predicts trends in
Classification of Communicates and visually
represents
the
basic
structural
macroscopic properties,
Substances
Predicts trends in
macroscopic properties,
based on predicted structure
and strength of atomiclevel interactions for cases
in which the properties
reported are unfamiliar,
the data is ambiguous, and/
or the materials lie within
the boundaries between
material types. Draws clear
connections between the
atomic-level forces and
Coulombs law.
features of different classes

of solids metallic, ionic,
network covalent, and
molecular. Relates the
gross features of different
solids (e.g., conductivity,
boiling point, etc.) to the
types of forces between
atoms. Predicts trends in
macroscopic properties based
on recollection of general
trends.
based on predicted structure

and strength of atomiclevel interactions for cases
in which the properties
reported are familiar, the
data is unambiguous, and the
materials clearly fall within
one of the familiar types:
metals, alloys, ionic solids,
network covalent solids,
molecular solids, gases, or
liquids.
Molecules
Uses Lewis dot structures

and VSEPR to predict the
bond orders, 3-D structure,
and polarity of a molecule.
Communicates why
these models are useful
for determining which
compounds are likely to be
stable.
Based on molecular structure,

predicts the types and
strengths of intermolecular
forces. Based on molecular
structure, predicts molecular
properties such as relative
strengths of acids. Interprets
separation experiments based
on predictions regarding
intermolecular forces.
Relates multiple factors

influencing molecular
structure, such as resonance
and formal charge. Designs
separation experiments based
on predictions regarding
intermolecular forces. Relates
solutesolvent interactions
based on intermolecular
forces. Recounts the
properties of polymers based
on intermolecular forces.
Solutions
Uses and applies solution

stoichiometry in a variety
of contexts. Selects
appropriate particulate-level
representations of a solution,
showing interactions between
solute and solvent.
Interprets particulate-level
representations of a solution.
Relates the factors that
influence solubility of a salt
in water.
Generates and translates

between various particulatelevel representations of
a solution. Relates the
distinction between
homogeneous and
heterogeneous solutions.
Explains relative solubilities
(including solubilities in nonaqueous solvents) in terms of
intermolecular interactions.
Phases of
Matter
Generates representations
of the different phases of
matter. Uses the ideal gas law
to interrelate gas properties.
States the basic elements
of the kinetic molecular
theory. Describes with some
inaccuracy the relationship of
pressure to a particulate-level
view. Distinguishes constant
pressure from constant
volume conditions.
Predicts or analyzes data

regarding melting and
boiling points in terms of
the arrangement of particles
in the different phases
and estimated magnitudes
of intermolecular forces.
Accurately states the
particulate-level nature of
pressure and its relation to
the volume and temperature.
Describes the properties of
ideal gases based on kinetic
molecular theory.
Predicts or analyzes data

regarding deviations from
ideal gas behavior based on
kinetic molecular theory
and estimated strengths
of intermolecular forces.
Explains, on a particulate
level, why the ideal gas model
applies over a broad range.
Accurately explains the
relation between temperature
and kinetic energy, including
the distribution of kinetic
energies and meaning of
absolute zero temperature.

152
Appendix A
Competence
Mastery
Big Idea 3: Transformations

Physical and
Chemical
Processes
Given a reaction, predicts the

effects of this reaction on a
collection of molecules and
identifies whether the process
corresponds to a precipitation,
acidbase, or redox reaction.
From data, determines
expected amount and
product yield for a reaction.
Distinguishes between
exothermic and endothermic
reactions using data.
From data regarding a

chemical process, generates
an appropriate reaction
and identifies the process
as being a precipitation,
acidbase, or redox reaction.
Translates between symbolic,
macroscopic, and particulatelevel views of a chemical
process.
Identifies connections
between symbolic
representations of reactions
and energies associated with
change and equilibrium
(e.g., recounting that not all
reactions go to completion).
Classifies evidence as
suggesting a physical
versus chemical change,
for ambiguous cases (e.g.,
dissolution of a salt).
Electrochemistry
Writes a redox reaction in

terms of its half-cell reactions.
Uses half-cell potentials to
predict whether a redox
reaction will or will not occur
between a solid metal and
an aqueous ion. Identifies
the connection between the
standard cell potential and
of the reaction.
Relates the structure of

an electrochemical cell to
the processes occurring at
electrodes, the transport of
ions in the salt bridge, and
the flow of electrons through
the circuit. Distinguishes
electrolytic from galvanic cells
and the different processes
occurring in each. Predicts
the extent of a reaction using
Faradays law. Interprets data
from a redox titration.
Predicts products of
an electrolysis reaction
depending on the redox
potentials of the solute species
and solvent. Designs a redox
titration experiment.

153
Competence
Mastery
Big Idea 4: Kinetics

Rate and
Collision
Theory
Provides a basic definition

of reaction rate and explains
that reaction rate is
influenced by factors such
as temperature, surface area,
and concentration. Accurately
identifies the rate law for
reactions of various orders
and uses this to compute the
rate. Connects half-life with
rate constant for a first-order
reaction. Explains that the
rate is influenced by the
number of collisions and the
energy and orientation of
those collisions.
Identifies the connection

between the influence of
concentration on the reaction
rate, a particulate-level view,
and collision theory, with not
all collisions being successful.

between the influence of
temperature on the reaction
rate, a particulate-level
view, and a reaction energy
profile (e.g., Boltzmann
distributions and activation
energy). Explains why the
rate of the reaction changes
as the reaction progresses.
Explains when half-life is
concentration independent.
Mechanism
Distinguishes between a
mechanism and an overall
reaction. Relates that catalysts
increase the rate of a reaction
and are not consumed by the
reaction.
Given a simple mechanism,

predicts the rate law. Identifies
reaction intermediates and
catalysts.
Predicts the rate for

mechanisms in which the
first step is not rate limiting.
Uses experimental data to
distinguish between various
proposed mechanisms,
including affirming that
multiple mechanisms may
be consistent with the
observations. Relates catalysis
to mechanistic steps and to
a particulate-level view of a
reaction.
Observations
(Measurement)

between direct measures of
concentration and the rate
of the underlying reaction.
Qualitatively distinguishes
fast from slow reactions.

between less direct
observations (intensity of
color, color changes) made
at the macroscopic level and
the rate law of an underlying
reaction.
Designs an experiment to
determine the rate law of
a reaction. Articulates the
distinction and relation
between the rate law and
integrated rates, and uses
these to determine rate laws
from experimental data
regarding either initial rates
or changes in concentration
versus time.

154
Appendix A
Competence
Mastery
Big Idea 5: Thermodynamics

Nature of Heat
and Transfer
Identifies subsystems involved

in a heat transfer process
and the type of process
occurring in each subsystem,
for simple cases (e.g., a metal
bar in water). Articulates that
temperature is a measure of
average kinetic energy, and
heat transfer is kinetic energy
transfer. Solves simple heat
transfer problems (e.g., those
involving heat transfer in
which no phase changes or
reactions occur).
Identifies subsystems for

more complex situations,
such as situations involving
work or reactions occurring
in solution. Solves heat
transfer problems that involve
phase transitions. Relates
average particle velocities to
temperature and mass (e.g.,
less massive particles move
faster at a given temperature),
including connections to
particulate representations.
Solves heat transfer problems

that involve chemical
reactions. Delineates the
distribution of kinetic
energies present at a given
temperature, including
connections to particulate
representations.
Nature of
Chemical
Energy
States that breaking a

bond requires energy. Uses
mathematical relations that
relate heat to heat capacity, for
simple situations. Generates
and interprets graphical
representations, capturing
the relative state energies of
chemical substances.
Connects the bond energies

of reactants and products
to the heat of reaction.
Delineates qualitatively the
origins and consequences of
substances that have different
heat capacities and recognizes
the distinction between heat
and temperature. Explains
relative magnitudes of
thermodynamic properties in
terms of molecular structure
of materials and the strength
and nature of chemical
bonds and intermolecular
forces. Interprets a graph of
energy versus interparticle
separation. Analyzes energy
transformations for complex,
multicomponent, or multistep
processes.
Generates and interprets

diagrams showing the
relationship between energy
and interparticle separation.
Reasons accurately about
heat and energy in complex
systems, such as those arising
in biological systems.
Free Energy and States a form of the second

law of thermodynamics.
Work
Estimates the magnitude of

the entropy change associated
Qualitatively ranks the
with a process, using
entropy changes associated
particulate-level reasoning.
with various chemical
From information about the
processes. Calculates free
occurrence of an endothermic
energy for a process given
process, identifies that the
the change in enthalpy and
entropy must be increasing.
entropy, and identifies the
Explains the use of coupled
sign of the result as indicating processes to drive unfavorable
favorability. Communicates
thermodynamic processes,
that both enthalpy and
such as the use of a battery to
entropy must be considered to drive an electrolytic cell.
determine spontaneity.
Describes how heat is

connected to PV work and
explains that the second law
limits the ability to convert
heat to work. Relates the
consequences of positive
versus negative
; for
instance, articulates that
processes with
may
still occur, depending on
initial conditions. Explains the
distinction between processes
that are thermodynamically
unfavorable versus reactions
that are too kinetically slow to
be observed.

155
Big Idea 5: Thermodynamics (continued)

Calorimetry
States the connection

between calorimetry and
the law of conservation of
energy. Interprets data from
a calorimetry experiment to
determine the heat liberated
by a chemical process.
Explains that the value of
is tied to a particular equation
and when coefficients are
multiplied, the value of
is
also multiplied and when the
equation is reversed, the sign
changes.
of
Interprets data from a

calorimetry experiment to
determine heat capacity or
heat of fusion. Uses Hesss
law to add together steps of a
chemical process to determine
overall reaction enthalpy
or establish a reaction as
endothermic or exothermic.
Interprets data from a

calorimetry experiment to
determine heat of reaction
or dissolution. Designs a
calorimetry experiment.

156
Appendix A
Competence
Mastery
Big Idea 6: Equilibrium

Equilibrium
Generates the equilibrium

expression for a given
reaction and manipulates
it for reaction reversal, etc.
Uses Le Chateliers principle
for simple situations (e.g.,
simple stress applied to a
single reaction). Given a set
of concentrations, computes
Q and compares it to K to
determine direction of a
reaction. Solves equilibrium
problems involving a single
reaction. Communicates
that at equilibrium reactions
continue to occur.
Maps real systems (e.g.,

solubility of salts and
molecules, vapor pressures)
onto equilibrium processes.
Given data, identifies the
point at which a system
reaches equilibrium and
relates this to a balance of
forward and reverse rates.
Clearly recognizes the
distinction between initial
and equilibrium and relates
this to a balance of forward
and reverse rates. Clearly
recognizes the distinction
between initial and
equilibrium and conditions
and how these are related via
the equilibrium expression.
Understands that there
are many different sets of
concentrations that satisfy the
equilibrium expression and
that Le Chateliers principle
predicts a shift from one
equilibrium state to another
equilibrium state in response
to a stress.
Can use Le Chateliers

principle and stoichiometry
to reason about complex
situations, such as liquid
vapor equilibria in systems
with different volumes or
addition of an inert gas at
constant volume. Understands
the connection between
equilibrium constants and
forward/reverse rate constants
for single-step reactions. Can
use equilibrium reasoning
to design conditions that
optimize a desired result,
such as product yield. Can
connect reasoning based
on Le Chateliers principle
to reasoning based on a
comparison of Q and K.
AcidBase
When discussing acids

and bases, affirms the
definitions of strong/weak
versus concentrated/dilute.
Determines pH of a strong
acid solution. Determines pH
of a strong base. Interprets
titration curves for simple
situations, such as titration
of a monoprotic acid with
a strong base. Presents the
components of a buffer.
Interrelates pH, , and for

solutions of a single strong or
weak acid or base. Articulates
and justifies, and generates
representations of, which
species will be present in large
versus small concentrations
in simple solutions, such
as a single component acid
solution. Identifies the
ionization state of a weak
acid, given the pH and
. Identifies a particular
mixture as being a buffer
solution, estimates the pH,
and identifies the reactions
occurring upon addition of
an acid or base. Describes
and/or interprets changes in
a titration curve for acids of
different strengths or different
concentrations of the same
acid. Generates particulate
representations of buffer
solutions.
Articulates and justifies, both

through computation and
estimation, which species
will be present in large
versus small concentrations
in equilibrium systems
containing mixtures of
acids, bases, salts, etc.
Interprets titration curves
for unfamiliar situations,
including identifying the
majority species at any point.
Designs buffers with a target
pH and buffer capacity.
Explains the consequences of
the temperature dependence
of .

157
Big Idea 6: Equilibrium (continued)

Solubility
Accurately relates solubility

to
for salts. Ranks
solubilities based on
for
salts with identical numbers
of ions.
Accurately relates solubility

to
for arbitrary salts.
Explains the meaning of
saturated solution and the
relation to solubility and .
Uses Le Chateliers principle
to reason qualitatively about
the common ion effect and
solubility.
Articulates when the ranking

of solubility does and does
not follow the ranking of .
Equilibrium
and Thermodynamics
Uses the mathematical

relation connecting free
energy to the equilibrium
constant. States that there is a
connection between the heat
of dissolution and the nature
of the interparticle forces.
Explains qualitatively the

consequences of the relations
between free energy and the
equilibrium constant.
Articulates and cites

inferences about the relation
between the magnitude of
K and the thermodynamic
notion of
, indicating
favorability. Articulates and
cites inferences about the
conditions (
and )
under which K is close to 1.
Identifies and explains free
energy in complex systems,
such as biological systems.
Relates at the particulate
level the enthalpic and
entropic effects accompanying
dissolution of a salt.

158
Appendix A
Competence
Mastery
Investigative and Communication Skills

Experimental
Design
Identifies the variable being

changed in an experiment.
Recounts the types of
information gathered
byfamiliar experiments.
Correctly selects and uses
tools to measure desired
quantities.
Clearly articulates which

variables are being varied and
which are being controlled
in an experiment. Identifies
likely sources of error.
Portrays principled design

in experiments that vary a
desired variable and control
other relevant variables.
Describes the impact of errors
on the experimental results
and refines experiments to
reduce the impact of such
errors.
Data Analysis
Presents data in the format

most familiarly used
for a particular class of
experiments. Calculates
the target quantities from
experimental data. Handles
units correctly.
Reports data to the

appropriate level of precision.
Translates between various
representations of the data,
e.g., graphical or tabular.
Estimates the uncertainty

of the target quantity based
on uncertainties in the
measured quantities, e.g.,
uses a computational tool
to estimate error in a linear
regression and/or rejects
outliers.
Terminology
Identifies domain-specific
terms, with occasional errors
in use of terms that have
similar meanings.
Consistently and accurately

uses domain-specific terms.
Consistently and accurately

uses domain-specific terms.
Modeling
Identifies what a model is

and recounts that modelbuilding is central to science.
Articulates that models are
derived from observations
and are attempts to explain
data; but do not replace
reality (i.e., that models are a
human invention). Recounts
models that were experienced
previously and applies
those models to simple, but
unfamiliar, situations.
Selects appropriate models

to address a given situation.
States that the best models
have predictive value. Affirms
that models have limitations.
Applies multiple models to a

complex situation. Identifies
when a model is insufficient
to explain a certain
phenomenon.

159

160
Appendix B
Appendix B: AP Chemistry
Equations and Constants

161

162
Appendix C
Appendix C:
How to Set Up a Lab Program
Preparing Students for AP Chemistry Investigations
Observations and Data Manipulation
Students must practice the art of making careful observations and of recording accurately
what they observe. Too frequently students confuse what they see with what they think
they are supposed to see. They should be encouraged to be accurate reporters even when
their findings Seem to conflict with what the textbook or laboratory procedure has led
them to expect. Proper interpretation of observations is also important. Students should
be familiar with finding evidence of chemical change (color change, precipitate formation,
temperature change, gas evolution, etc.) and its absence (for example, in the identification
of spectator ions). Students should know how to make and interpret quantitative
measurements correctly. This includes knowing which piece of apparatus is appropriate.
Communication, Group Collaboration, and the Laboratory Record
Laboratory work is an excellent means through which students can develop and practice
communication skills. Success in subsequent work in chemistry depends heavily on an
ability to communicate about chemical observations, ideas, and conclusions. Students
must learn to recognize that an understanding of chemistry is relatively useless unless
they can communicate their knowledge effectively to others. By working together in
a truly collaborative manner to plan and carry out experiments, students learn oral
communication skills and teamwork. Students must be encouraged to take full individual
responsibility for the success of the collaboration and not be a sleeping partner ready to
blame the rest of the team for failure.
Physical Manipulations
Students must learn the skills necessary to use the following ordinary equipment:
beakers, flasks, test tubes, crucibles, evaporating dishes, watch glasses, burners,
plastic and glass tubing, stoppers, valves, spot plates, funnels, reagent bottles, wash
bottles, droppers, and measuring equipment, including:
balances (single pan, double pan, triple beam), thermometers
, barometers,
graduated cylinders, burets, volumetric pipets, graduated pipets, volumetric flasks,
ammeters, voltmeters, pH meters, spectrophotometers

163
Processes and Procedures

Familiarity (more than a single days experience) with such general types of chemical
laboratory work as the following is important:
synthesis of compounds (solid and gas)
separations (precipitation and filtration, dehydration, centrifugation, distillation,
chromatography)
titration using indicators and meters
spectrophotometry/colorimetry
gravimetric analysis
Laboratory Safety
A successful AP Chemistry laboratory program will instill in each student a true, lifelong
safety sense that will ensure his or her safe transition into more advanced laboratory
work in college or university laboratories or into the industrial workplace environment.
The conditions under which AP Chemistry courses are offered vary widely in
terms of facilities and equipment. This is also true for colleges and universities
offering general chemistry courses. It is important that certain concerns regarding
laboratory safety be addressed in all programs. All facilities should conform to
federal, state, and local laws and guidelines pertaining to the safety of students and
instructors.
Teachers with a limited background in chemistry should receive additional safety
training specific to chemistry laboratories before beginning teaching
AP Chemistry.
Laboratory experiments and demonstrations should not be carried out if they
could expose the students to unnecessary risks or hazards (e.g., explosion
experiments that do not have any learning objective).
Students should be fully informed of potential laboratory hazards relating to
chemicals and apparatuses before performing specific experiments. If possible,
students themselves research safety information online or at a library or local
college before engaging in laboratory work.
Storage and disposal of hazardous chemicals must always be done in accordance
with local regulations and policies. Instructors and students should know what
these regulations are.
Basic laboratory safety instruction for students should be an integral part of each
laboratory experience. Topics that should be covered include:

164
Appendix C
simple first aid for cuts and thermal and chemical burns;
use of safety goggles, eye washes, body showers, fire blankets, and fire
extinguishers;
safe handling of glassware, hot plates, burners and other heating devices, and
electrical equipment;
proper interpretation of Material Safety Data Sheets (MSDS) and hazard warning
labels; and
proper use and reuse practices (including proper labeling of interim containers)
for reagent bottles.
Microscale Experiments
One important change in chemistry laboratory instruction in recent years has been the
introduction of microscale experiments. While the initial goal in this development may
have been to improve safety by reducing the amounts of hazardous materials handled,
several other benefits have been realized. These include:
decreased cost of chemicals acquisition and disposal;
reduced storage space requirements and safer storage;
less need for elaborate laboratory facilities in schools;
greater care needed by students to obtain and observe results;
shorter experiment times as well as easier and faster cleanup; and
ability to carry out some experiments that were once restricted to demonstrations
because of their hazards in macroscale.
Textbooks
Publishers of general chemistry textbooks typically market an associated laboratory
manual. Most laboratory manuals have instructors guides or instructors versions
that provide invaluable help in preparing equipment and solutions. Many contain
prelaboratory exercises for each experiment and special sections on safety, general
techniques for using equipment, and instructions for writing laboratory reports. Another
important resource for laboratory reports is the ACS Style Guide (3rd edition, 2006),
which is available from the American Chemical Society (www.acs.org). Teachers who
are beginning or adapting laboratory programs will find other helpful resources at AP
Central. The Resource section of the AP Teacher Community for Chemistry offers reviews
of textbooks, articles, websites, and other teaching resources. At AP Central, teachers can
also subscribe to the AP Teacher Community and request advice or opinions regarding all
issues relating to the teaching of AP Chemistry, including the laboratory.

165
Teacher Preparation Time and Professional Development

Because of the nature of the AP Chemistry course, the teacher needs extra time to prepare
for laboratory work. Therefore, adequate time must be allotted during the academic year
for teacher planning and testing of laboratory experiments. In the first year of starting an
AP Chemistry course, one month of summer time and one additional period each week are
also necessary for course preparation work. In subsequent years, an AP Chemistry teacher
routinely requires one extra period each week to devote to course preparation. AP Chemistry
teachers need to stay abreast of current developments in teaching college chemistry. This
is done through contact with college faculty and with high school teacher colleagues.
Schools should offer stipends and travel support to enable their teachers to attend
workshops and conferences. An adequate budget should be established at each school
to support professional development of the AP Chemistry teacher. The following are
examples of such opportunities.
One- or two-week AP Summer Institutes (supported by the College Board) are
offered in several locations.
One-day AP conferences are sponsored by College Board regional offices. At
these, presentations are made by experienced AP or college-level teachers, many of
whom have been AP Exam Readers or members of the Development Committee.
AP institutes covering several disciplines are offered as two- or three-day sessions
during the school year. These are also organized by College Board regional offices
and are held at hotels or universities. Additional opportunities are often provided
by local colleges or universities, or by local sections of the American Chemical
Society. These can be in the form of one-day workshops, weekend retreats, or
summer courses. All offer excellent networking possibilities for AP Chemistry
teachers, who can exchange ideas with their colleagues and build long-term
support relationships.

166
Contact Us
New York Office
New England Regional Office
45 Columbus Avenue
New York, NY 10023-6992
212-713-8000
212-713-8277/55 (Fax)
Serving Connecticut, Maine, Massachusetts,

New Hampshire, Rhode Island, and Vermont
1601 Trapelo Road, Suite 12
Waltham, MA 02451-7333
866-392-4089
781-663-2743 (Fax)
Email: [email protected]
AP Services for Educators

P.O. Box 6671
Princeton, NJ 08541-6671
212-632-1781
877-274-6474 (toll free in the U.S. and Canada)
610-290-8979 (Fax)
AP Canada Office
2950 Douglas Street, Suite 550
Victoria, BC, Canada V8T 4N4
250-472-8561
800-667-4548 (Toll free in Canada only)
College Board International

Serving all countries outside the U.S. and Canada
45 Columbus Avenue
New York, NY 10023
212-373-8738
646-417-7350 (Fax)
Middle States Regional Office

Serving Delaware, District of Columbia, Maryland,
New Jersey, New York, Pennsylvania, Puerto Rico,
and the U.S. Virgin Islands
Three Bala Plaza East, Suite 501
Bala Cynwyd, PA 19004-1501
866-392-3019
610-227-2580 (Fax)
Midwestern Regional Office

Serving Illinois, Indiana, Iowa, Kansas, Michigan,
Minnesota, Missouri, Nebraska, North Dakota,
Ohio, South Dakota, West Virginia, and Wisconsin
8700 West Bryn Mawr Avenue, Suite 900N
Chicago, IL 60631-3512
866-392-4086
847-653-4528 (Fax)
Southern Regional Office

Serving Alabama, Florida, Georgia, Kentucky,
Louisiana, Mississippi, North Carolina, South
Carolina, Tennessee, and Virginia
3700 Crestwood Parkway, Suite 700
Duluth, GA 30096-7155
866-392-4088
770-225-4062 (Fax)
Southwestern Regional Office

Serving Arkansas, New Mexico, Oklahoma,
and Texas
4330 Gaines Ranch Loop, Suite 200
Austin, TX 78735-6735
866-392-3017
512-721-1841 (Fax)
Western Regional Office

Serving Alaska, Arizona, California, Colorado,
Hawaii, Idaho, Montana, Nevada, Oregon, Utah,
Washington, and Wyoming
2001 Gateway Place, Suite 220W
San Jose, CA 95110-1017
866-392-4078
408-367-1459 (Fax)
www.collegeboard.org/apcentral
140086109
14b-9851

Ap Chemistry Course and Exam Description PDF

Uploaded by

Copyright:

Available Formats

Ap Chemistry Course and Exam Description PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ap Chemistry Course and Exam Description PDF

Uploaded by

Copyright:

Available Formats

AP CHEMISTRY

Course and Exam Description

Course and Exam Description

The College Board

About the College Board

AP Equity and Access Policy

AP Chemistry Curriculum Framework................................................................... 5

Science Practices for AP Chemistry.......................................................................................82

The Laboratory Investigations .............................................................................. 107

2014 The College Board.

Participating in the AP Course Audit................................................................... 111

Exam Information...................................................................................................... 113

Appendix A: Preparing Students for Success in AP Chemistry .................. 150

2014 The College Board.

About This Edition

About This Edition

Spring 2014 revisions

1. Substitutional alloys form between

Essential Knowledge 2.D.3 Covalent network solids generally have

Covalent network solids have properties

Return to the Table of Contents