Reddy CV 2013

Resume of J.N.
Reddy
RESUME OF
J.N. REDDY
e-mail: [email protected]
http://isihighlycited.com/ http://www.tamu.edu/acml
http://en.wikipedia.org/wiki/J._N._Reddy
SUMMARY
Dr. Reddy is a Distinguished Professor, Regents Professor, and inaugural holder of the Oscar S.
Wyatt Endowed Chair in Mechanical Engineering at Texas A&M University, College Station,
Texas. Dr. Reddy earned a Ph.D. in Engineering Mechanics in 1974 (Advisor: J. T. Oden). He
worked as a Post-Doctoral Fellow in Texas Institute for Computational Mechanics (TICOM) at
the University of Texas at Austin, Research Scientist for Lockheed Missiles and Space Company,
Huntsville, during l974-75, and taught at the University of Oklahoma from 1975 to 1980,
Virginia Polytechnic Institute & State University from 1980 to 1992, and Texas A&M University
from 1992 till now.
Dr. Reddy is the author of nearly 500 journal papers and 18 books (several with second
and third editions) on energy principles, variational methods, plates and shells, composite
materials, mechanics of solids, and the finite element method and its applications. The books
authored by Dr. Reddy include: An Introduction to Continuum Mechanics with Applications,
Cambridge University Press (2004, 2nd ed. 2013); Theory and Analysis of Elastic Plates and Shells,
Taylor & Francis (1999, 2nd ed., 2007); An Introduction to the Finite Element Method, McGraw-Hill
(1984, 3rd ed., 2006); An Introduction to Nonlinear Finite Element Analysis, Oxford University Press,
2004; Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press (1999, 2nd
ed., 2004); Energy Principles and Variational Methods in Applied Mechanics, John Wiley (1984, 2nd
ed., 2002); Applied Functional Analysis and Variational Methods in Engineering, McGraw-Hill, 1986.
Dr. Reddy has delivered over 120 plenary, keynote lectures, or general invited lectures at
international conferences and institutions; taught over 90 short courses on finite elements,
composite materials, and nonlocal structural theories; and advised 32 postdoctoral fellows and
research visitors and over 100 graduate theses (60 Ph.D. and 45 M.S. students).
Dr. Reddy is the first recipient of the University of Oklahomas College of Engineering's
Award for Outstanding Faculty Achievement in Research, the 1984 Walter L. Huber Civil Engineering
Research Prize of the American Society of Civil Engineers (ASCE), the 1985 Alumni Research
Award at Virginia Polytechnic Institute, and 1992 Worcester Reed Warner Medal and 1995 Charles
Russ Richards Memorial Award of the American Society of Mechanical Engineers (ASME). He
received German Academic Exchange (DAAD) and von Humboldt Foundation (Germany)
research awards. Most recently, he received the 1997 Melvin R. Lohmann Medal from Oklahoma
State University's College of Engineering, Architecture and Technology, the 1997 Archie Higdon
Distinguished Educator Award from the Mechanics Division of the American Society of
Engineering Education, the 1998 Nathan M. Newmark Medal from the American Society of Civil
Engineers, the 2000 Excellence in the Field of Composites and 2004 Distinguished Research Award
from the American Society for Composites, the 2000 Faculty Distinguished Achievement Award for
Research from Texas A&M University, the 2003 Texas A&M Bush Excellence Award for Faculty in
International Research award, the 2003 Computational Solid Mechanics award from USACM, and
Resume of J.N. Reddy
2007 Distinguished Achievement in Teaching Award, Association of Former Students (AFS), Texas
A&M University. Dr. Reddy received a Technical Achievement Award from the National
Academy of Engineering for outstanding contributions to engineering education and
research. He has also received Certificates of Teaching Excellence at Virginia Polytechnic Institute
and Outstanding Graduate Teaching award from Texas A&M University. Recently, he is selected
as the Honorary Member of the American Society of Mechanical Engineers, 2011. Dr. Reddy
received honorary degrees (Honoris Causa) from the Technical University of Lisbon, Portugal
in 2009 and Odlar Yurdu University, Baku, Azerbaijan in 2011.
Dr. Reddy is a life fellow of the American Society of Mechanical Engineers (ASME), and a
fellow of the American Academy of Mechanics (AAM), the American Institute of Aeronautics
and Astronautics (AIAA), the American Society of Civil Engineers (ASCE), the American
Society for Composites (ASC), International Association of Computational Mechanics (IACM),
U.S. Association of Computational Mechanics (USACM), the Aeronautical Society of India, and
the Institution of Structural Engineers, U.K.
Dr. Reddy serves on the editorial boards of about two-dozen journals, including Annals of
Solid and Structural Mechanics, Composite Structures, International Journal for Numerical Methods in
Engineering, International Journal for Numerical Methods in Biomedical Engineering, and International
Journal of Non-Linear Mechanics. He is the Editor-in-Chief of Mechanics of Advanced Materials and
Structures, International Journal of Computational Methods in Engineering Science and Mechanics, and
International Journal of Structural Stability and Dynamics. Dr. Reddy served as the chair of the
ASME (Appied Mechanics Division) Committee on Computing in Applied Mechanics, the
ASCE (Engineering Mechanics Division) Committee on Computational Mechanics, the
Executive Committee and Advisory Board of the Engineering Mechanics Division of ASCE. Dr.
Reddy is also a member of the International Association of Computational Mechanics, former
co-editor of its bulletin, a founding member and former president of the U.S. Association of
Computational Mechanics.
As a result of Dr. Reddys extensive publications of archival journal papers and books in
wide range of topics in applied sciences and engineering, Dr. Reddy is one of the selective
researchers in engineering around world who is recognized by ISI Highly Cited Researchers with
over 13,000 citations (without self-citations over 12,000) with h-index of over 54 as per Web of
Science, 2013; as per Google Scholar the number of citations is over 29,000 and h-index is 71. A
more complete resume with links to journal papers can be found at (this web site lists only
highly cited researchers in engineering around the world): http://isihighlycited.com/ or
http://www.tamu.edu/acml.
CURRICULUM VITAE
PERSONAL
Naturalized U.S. citizen
EDUCATION
B.E. (5yr Course), Mechanical Engineering, Osmania University, Hyderabad, Andhra
Pradesh, India, 1968.
M.S., Mechanical Engineering, Oklahoma State University, Stillwater, Oklahoma, 1970.
Ph.D., Engineering Mechanics (Advisor: Dr. J. T. Oden), University of Alabama in
Huntsville, Alabama, 1973.
Post Doctoral Fellow, Texas Institute for Computational Mechanics, University of Texas at
Austin, 1973-1974.
PROFESSIONAL EXPERIENCE
1974-1975: Research Scientist, Lockheed Missiles and Space Company, Huntsville, Alabama.
1975-1978: Assistant Professor, School of Aerospace, Mechanical, and Nuclear Engineering,
University of Oklahoma, Norman.
1978-1980: Associate Professor, School of Aerospace, Mechanical, and Nuclear Engineering,
University of Oklahoma, Norman.
1980-1985: Professor, Engineering Science and Mechanics Department, Virginia Polytechnic
Institute and State University, Blacksburg, Virginia.
1986-1992: Clifton C. Garvin Professor of Engineering Science and Mechanics, Virginia
Polytechnic Institute and State University, Blacksburg, Virginia.
2006-2007: Head of Engineering Science Programme, National University of Singapore,
Singapore (an honorary position to provide intellectual leadership, vision, and policy
making).
1992-present: Oscar S. Wyatt, Jr. Chair in Mechanical Engineering; adjunct faculty
appointments in Department of Civil Engineering, Department of Aerospace Engineering,
and Department of Mathematics, Texas A&M University, College Station, Texas.
1998-present: Distinguished Professor, Texas A&M University, College Station, Texas.
2010-present: Regents Professor, Texas A&M University, College Station, Texas.
RESEARCH BACKGROUND AND INTERESTS

General: Mathematical formulation and analysis of problems in applied mechanics including
solid and structural mechanics, computational fluid mechanics, computational heat transfer,
Development of refined mathematical models and computational (FEM) schemes for the
analysis of composite materials and structures, plate and shell theories, and energy and
variational principles.
Current Research Activities: Analysis of laminated composite plates and shells with
actuators/sensors; health-monitoring of composite structures with damage; thermo-mechanical
analysis of functionally graded materials; multiscale analysis of carbon nanotube-reinforced
composite materials; development of robust and efficient computational technology for the
solution of critical problems of mechanics (e.g., least-squares based computational algorithms
for the analysis of fluid flows and plate and shell structures); and formulation and numerical
simulation of biomechanics problems including stress and deformation of biological cells and
soft tissues.
HONORS AND AWARDS

Significant National and International Awards
Recognition for Career Achievement, presented by the organizers of the 17th International
Conference on Composite Structures (ICCS/17), at the University of Porto, Porto, Portugal, 1721 June 2013.
Distinguished Visiting Fellowship, The Royal Academy of Engineering, London, UK, 2013.
Top 100 Scientists, International Biographical Centre, Cambridge, England, October 2012.
Satish Dhawan Visiting Professor, Department of Aerospace Engineering, Indian Institute of
Science, Bangalore, 2012-2013.
"Alternative Least-Squares Finite Element Models of Navier-Stokes Equations for PowerLaw Fluids," (coauthored with V. P. Vallala and K.S. Surana), Engineering Computations
(International Journal for Computer-Aided Engineering and Software), Vol. 28 No. 7, pp.
828-852, 2011. Selected as a Highly Commended paper at the Literati Network Awards for
Excellence 2012.
The Japanese Society of Mechanical Engineers (JSME) Computational Mechanics Award 2012,
October 2012.
Alternative least-squares finite element models of Navier-Stokes equations for power-law
fluids, (by V. Vallala, J.N. Reddy, and K.S. Surana) published in Engineering Computations
Dec 2010, has been chosen as a Highly Commended Award Winner at the Emerald Literati
Network Awards for Excellence 2012.
Leading Scientists of the World, International Biographical Centre, Cambridge, England,
August 2012.
Bharat Jyoti Award, India International Friendship Society, New Delhi, India, January 2012.
Honorary Member, American Society of Mechanical Engineers (ASME), Nov. 2011.
Honorary Doctorate Degree, Odlar Yurdu University, Baku, Azerbaijan, September 2011.
Life Fellow, American Society of Mechanical Engineers (ASME), June 2011.
Award for Career Achievement, presented by the organizers of the ACE-X 2010, Paris, France,
July 2010.
Continuous Sensitivity Analysis of Fluid-Structure Interaction Problems Using LeastSquares Finite Elements, (authored by Douglas Wickert, Robert Canfield, and J.N. Reddy)
AIAA Paper 2008-5931, the 2008 AIAA Best Paper; certificate presented by the AIAA
Multidisciplinary Design Optimization Technical Committee, September 2010.
The Bert Distinguished Lecture, School of Aerospace and Mechanical Engineering, University
of Oklahoma, Norman, OK, March 6, 2009.
The 2009 Landis-Epic Lecture (presented once in 5 years), Department of Civil and
Environmental Engineering, University of Pittsburgh, Pittsburgh, March 20, 2009.
Distinguished Lecture Series Lecturer, College of Engineering, West Virginia University,
Morgantown, WVA, March 27, 2009.
Honoris Causa, Honorary degree from the Technical University of Lisbon, Portugal, Feb. 16,
2009.
JN Reddy Symposium, Symposium organized in honor of J.N. Reddy for life time
achievements and contributions to composite materials, the 23rd Annual Technical Conference
on Composite Materials, American Society of Composite Materials, Memphis, Tennessee, 9-11
September 2008.
Editor-in-Chief, Applied Mechanics Reviews, American Society of Mechanical Engineers, New
York, October 2007.
JN Reddy Book prizes, presented to the top students in 1st, 2nd, and 4th year of the Engineering
Science Programme at the National University of Singapore (instituted in 2006).
B. R. Seth Memorial Lecture, the 51st Congress of Indian Society of Theoretical and Applied
Mechanics (ISTAM), December 18-21, 2006, Andhra University, Visakhapatnam, INDIA.
Fellow of the Institution of Structural Engineers, Singapore, 2005.
Fellow of the American Institute of Aeronautics and Astronautics, May 2005.
Distinguished Research Award of the American Society for Composites, October 2004.
The Dow Chemical Best Paper Award for the paper Assessment of Plastic Failure of Polymers
due to Surface Scratches, (with G. T. Lim and H.-J. Sue) in the General Category of the
Failure Analysis and Prevention Special Interest Group at ANATECH 2004, Chicago, 2004.
Winner of the Poster Competition in the International Conference on Polyolefins, Houston,
Texas, 2004.
Computational Solid Mechanics award of the US Association for Computational Mechanics,
July 2003.
C. S. Krishnamoorthy Memorial Lecture, Indian Institute of Technology, Madras, December 10,
2002.
Fellow of the American Society for Composites (ASC), October 2002.
Alumni of Achievement, the University of Alabama in Huntsville, Alabama, February 4, 2002.
TANA Award for Excellence in Education and Research from the Telugu Association of North
America, July 2001, New York.
Distinguished Alumni (Engineering) from the University of Alabama in Huntsville,
Huntsville, Alabama, May 11, 2001.
Nanyang Professorship, Nanyang Technological University, Singapore, 2002-2005.
Excellence in the Field of Composites Award from the American Society for Composites,
September 2000.
The Nathan M. Newmark Medal from the American Society of Civil Engineers, October 1998.
Outstanding Educator Award from the American Telugu Association (ATA), Detroit,
Michigan, July 1998.
Fellow of the International Association of Computational Mechanics (IACM), 1998.
The Melvin R. Lohmann Medal from Oklahoma State University, Stillwater, Oklahoma, 1997.
The Archie Higdon Distinguished Educator Award from the American Society of Engineering
Education, June 1997.
Karunesh Memorial Lecture, the 42nd Congress of the Indian Society of Theoretical and
Applied Mechanics (ISTAM), Regional Engineering College, Surat, Gujrat, India, Dec 28,
1997.
Charles Russ Richards Memorial Award, the American Society of Mechanical Engineers, 1995.
Distinguished Visiting Professor, Institute for High Performance Computing (IHPC) and the
National University of Singapore, 1998-1999.
Technical Achievement Award of the National Academy of Engineering (NAE), 1995.
Fellow of the U.S. Association of Computational Mechanics (USACM), 1995.
Visiting Professor, Institute for Computer Applications and Design, University of Stuttgart,
Germany, 1994.
NATO Fellow, Middle East Technical University, Ankara, Turkey, 1994.
Fellow of the American Society of Civil Engineers (ASCE), 1992.
The Neelakantam Memorial Lecture, presented at the Annual Convention of the Aeronautical
Society of India, December 11, 1992, Bangalore, India.
The Worcester Reed Warner Medal of the American Society of Mechanical Engineers, 1992.
Invited Speaker, Southwest Mechanics Lecture Series (University of Oklahoma, Texas A&M
University, Rice University, and University of Houston), 1991.
Fellow of the Aeronautical Society of India, 1991.
Oscar S. Wyatt, Jr., Chair Lecture, Texas A&M University, November 11, 1991.
Fellow of the American Society of Mechanical Engineers (ASME), 1989.
Visiting Scientist, Alcoa Centennial Technical Seminars on Mechanics, Hilton Head, 1987.
Visiting Professor, University of Missouri-Rolla, 1986.
The Alexander von Humboldt Foundation Research Fellowship, Germany, 1986.
The German Academic Exchange Service Research Grant, Germany, 1986.
Fellow of the American Academy of Mechanics (AAM), 1985.
Walter L. Huber Civil Engineering Research Prize, American Society of Civil Engineers, 1983.
Who's Who in Computational Science and Engineering, 2003.
Ralph R. Teetor Education Award, Society of Automotive Engineers (SAE), l976.
2000 Outstanding Scholars of the 21st Century, First Edition, 2001.
Whos Who in Executives and Professionals, 2001.
Highly Cited Researchers, 2000.
Outstanding Man of the 21st Century, 2000.
Dictionary of International Biography, 27th Edition, l998.
Five Hundred Leaders of Influence, l998.
Five Thousand Personalities of the World, 6th Edition, l998.
The International Directory of Distinguished Leadership, l998, 2001.
Outstanding People of the 20th Century, l998.

Whos Who in Engineering Education, Academic Keys, 2005.
Who's Who in America, 52nd Edition, l998.
Men of Achievement, l994.
Most Admired Men & Women of the Year, l994.
Who's Who Among Asian Americans, l994.
Who's Who in Science and Engineering, 2nd Edition, l994.
Who's Who in Technology, 1979-present, 6th Edition, 1988.
Personalities of America, 4th Edition, l985.
Outstanding Young Men of America, l979.
American Men and Women of Science, 17th Ed., l978.
Who's Who in the South and Southwest, l976-1996 (24th Ed.)
Who's Who in Computer Education and Research, l975.
Who's Who in America, 2004 (59th edition).
American Medal of Honor (American Biographical Institute), 2006.
2000 Outstanding Intellectuals of the 21st Century (International Biographical Centre,
Cambridge, England), 2006.
Significant Institutional Awards
Regents Professor, Texas A&M University, College Station, Texas, December 2010.
Distinguished Achievement in Teaching Award, Association of Former Students (AFS), Texas
A&M University, 2007.
Distinguished Lecture of the Sigma Xi, Texas A&M University, October 2005.
Distinguished Research Award of the Sigma Xi, Texas A&M University, March 2005.
Texas A&M Bush Excellence Award for Faculty in International Research, 2003.
Distinguished Achievement in Teaching Award, Association of Former Students (AFS), Texas
Lockheed Martin Fort Worth Company Excellence in Teaching, Texas A&M University, College
Station, TX 2002.
Distinguished Achievement in Research Award, Association of Former Students (AFS), Texas
Outstanding Graduate Teaching award, Department of Mechanical Engineering, Texas A&M
University, 1995.
Oscar S. Wyatt, Jr. Chair, Texas A&M University, 1992-present.
Clifton C. Garvin Professorship, Virginia Polytechnic Institute and State University, 1985-1992.
Certificates of Teaching Excellence, Virginia Polytechnic Institute and State University, 1981
and 1990.
The Alumni Research Award, Virginia Polytechnic Institute and State University, l985.
Finalist for Sporn Teaching Award, Virginia Polytechnic Institute and State University, 1983.
Outstanding Faculty Achievement in Research (the FIRST recipient), University of Oklahoma,

l979.
Purple Shaft Award (for a caring but tough faculty member) University of Oklahoma, 1978.
EDITORSHIP OF ARCHIVAL JOURNALS AND SERIES
Editor-in-Chief, Mechanics of Advanced Materials and Structures (formerly, Mechanics of

Composites Materials and Structures, John Wiley & Sons, Chichester, UK, 1994-1996); Taylor
and Francis, Philadelphia (1997-present).
Editor-in-Chief, International Journal for Computational Methods in Engineering Science and

Mechanics, Taylor and Francis, Philadelphia (2005-present); formerly, International Journal
of Computational Engineering Science (IJCES, World Scientific, Singapore).
Editor-in-Chief (with Y. B. Yang and C. M. Wang) International Journal of Structural

Stability and Dynamics (IJSSD), World Scientific, Singapore, (2001-present).
Series Editor Computational Mechanics and Applied Mathematics, CRC Press, Boca Raton,
Florida, (1995-present).
Associate Editor, Journal of Engineering Mechanics, the American Society of Civil Engineers
(ASCE), New York, (2012-present).
MEMBERSHIP ON EDITORIAL BOARDS OF JOURNALS

Present Memberships
1. Computer Methods in Applied Mechanics and Engineering, Elsevier Science, England (1997present).
2. International Journal for Numerical Methods in Engineering, John Wiley & Sons, London (1984present).
3. International Journal of Non-Linear Mechanics (Contributing Editor and Editor of Software
Survey Section, 1982-1992, Pergamon Press, London; member of the editorial board 1996present.
4. International Journal for Numerical Methods in Biomedical Engineering, John Wiley & Sons,
London (1984-present).
5. Composite Structures, Elsevier, London (2011-present)
6. Engineering Computations, MCB University Press, West Yorkshire, England (1984-present).
7. Engineering Structures, Elsevier Science, Oxford, England (1997-present).
8. Finite Elements in Analysis and Design (the international journal of applied finite elements
and computer aided engineering), Elsevier, London; member of the editorial board, 2001present.
9. Annals of Solid and Structural Mechanics, Springer-Verlag, Member of Editorial Board (2009present).
10. Latin American Journal of Solids and Structures (www.lajss.org), University of Sao Paulo,
Brazil, member of International Advisory Board, 2010-present.
11. Interaction and Multiscale Mechanics (IMM), An International Journal, Techno-Press, Daejeon,
S. Korea, Member of Editorial Board, 2009-present.
12. International Journal for Multiscale Computational Engineering, Begell House, Inc., NY,
(Editorial Board member, 2000-present).
13. Asian Journal of Civil Engineering (Building and Housing), The Building and Housing
Research Centre, Tehran, Iran, member of Editorial Advisory Board, 1999-present.
14. Journal of Solid Mechanics (www.jsm-iauarak.com), Department of Mechanical Engineering,
Islamic Azad University, Arak Branch, Iran, member of Editorial Board, 2009-present.
15. International Journal of Applied Mechanics, Imperial College Press (published by World
Scientific, Singapore), member of Editorial Board, 2009-present.
16. International Journal of Mechanics and Materials in Design, University of Toronto, Canada;
member of the editorial board (2002-present).
17. Interaction and Multiscale Mechanics: an International Journal (IMMIJ), Techno-Press, member
of the Editorial Board (2002-present).
18. International Journal for Integrated Computer-Aided Engineering (ICAE), ISO Press, member of
the Editorial board (2007-present).
19. Journal of Engineering and Applied Sciences (IJEAS), Member of Honorary Editorial Board
(2009-present).
20. International Journal of Computational Materials Science and Engineering (IJCMSE), published
by Imperial College Press, Member of the Editorial Board (2011-present).
21. Journal of Computational and Applied Research in Mechanical Engineering (JCARME), Member
of the Advisory Board (2012-present) http://jcarme.srttu.edu.
22. International Journal of Aerospace and Lightweight Structures (IJALS), published by
Imperial College, Member of the Editorial Board Member (2011-present).
23. Computer and Experimental Simulations in Engineering and Science (CESES), published by
Malliarispedia (www.j-ceses.com), member of Editorial Board, 2008-present.
24. International Journal of Virtual Technology and Multimedia, published by Inderscience
(www.inderscience.com), member of the Editorial Board, 2008-present.
25. Chinese Journal of Solid Mechanics (English title of Acta Mechanica Solida Sinica), Huazhong
University of Science and Technology, Wuhan, Hubei, 430074, 1996-present.
26. International Journal of Computational and Numerical Analysis and Applications, Bulgaria, 2001present.
Past Memberships
1.
Editor, Applied Mechanics Reviews, the American Society of Mechanical Engineers, 2006-2011
2.
Editor, USACM Newsletter, the U.S. Association of Computational Mechanics, 1988-1993.
3.
Associate Editor, Journal of Applied Mechanics, American Society of Mechanical Engineers,

New York (1992-2006).
4.
Associate Editor, Journal of Engineering Mechanics, the American Society of Civil Engineers
(ASCE), New York, (1992-1994).
5.
Scholarly Research Exchange, Hindawi Publishing Corporation (www.hindawi.com),

Member of the Advisory Board, 2008-2009).
6.
Manufacturing Technology & Research, An International Journal, Birla Institute of Technology,

Mesra, Ranch, INDIA; member of the editorial board (2003-present).
7.
Journal of Mathematical and Physical Sciences, the Indian Institute of Technology, Madras,
India (1989-present).
8.
Journal of the Aeronautical Society of India, the Aeronautical Society of India, New Delhi, India
(1995-present).
9.
Journal of Aerospace Sciences and Technologies, the Aeronautical Society of India, Bangalore,
India (2003-present).
10. The Institution of Engineers, Singapore, six journals published by IES, (International
Advisory Panel member, 1998-present).
11. Sadhana (Academy Proceedings in Engineering Sciences), Indian Academy of Sciences,
Bangalore, India, 2001-2008.
12. Iranian Journal of Science and Technology (Transactions: Technology), School of Engineering,
Shiraz, Iran, 1996-2008.
13. Asian Journal of Structural Engineering, The Building and Housing Research Centre and Iran
University of Science and Technology, Tehran, Iran (1993-2008).
14. Computers & Structures, Pergamon Press, London (1985-2002).
15. International Journal for Numerical Methods in Fluids, John Wiley, London (1984-2002).
16. Journal of Applied Mechanics, the American Society of Mechanical Engineers, ASME, New York,
(Associate Editor, 1992-1999).
17. Journal of Engineering Mechanics, the American Society of Civil Engineers, ASCE, New York,
(Associate Editor, 1992-1996).
18. Computational Mechanics Advances, an official publication of the International Association
for Computational Mechanics (IACM), North-Holland, The Netherlands (1992-1996).
19. Mathematical Modeling and Scientific Computing, the International Association for
Mathematical and Computer Modeling, Principia Scientia, St. Louis, 1993-1995.
20. Modeling and Computational Experiment in Engineering and Technology, University of Kocaeli,
Izmit, Turkey, 1994-1996.
21. IACM Bulletin, Newsletter of the International Association of Computational Mechanics,
IACM, John Wiley, London, (Editor, 1992-1996).
22. USACM Newsletter, the U.S. Association of Computational Mechanics (USACM), (Editor,
1988-1993).
23. Meccanica, International Journal of the Italian Association of Theoretical and Applied
Mechanics, Kluwer, Netherlands (1989-1994).
24. IACM Expressions, magazine of the International Association of Computational Mechanics,
IACM, IACM Secretariat, Barcelona, Spain, (member, 1996-2000).
25. Structural Engineering and Mechanics, Techno-Press, S. Korea, 1999-2009.
10
KEY NOTE AND PLENARY LECTURES AND SPECIAL SEMINARS DELIVERED

1.
J.N. Reddy, Recent Developments in the Analysis of Composite Plates and Shell
Structures, Symposium on Mechanics of Structures, Faculty of Engineering, University of
Rome II, Italy, May 4-7, 1982.
2.
J.N. Reddy, Nonlinear Analysis of Layered Composite Structures, FEMSA/83

Symposium, Jan. 10-12, 1983, University of Cape Town, South Africa.
3.
J.N. Reddy, A Shear Deformable Shell Element for Laminated Composites, NASA
Lewis/University/ Industry Workshop on Nonlinear Analysis for Engine Structures,
April 19-20, 1983, NASA Lewis Research Center, Cleveland, OH.
4.
J.N. Reddy, On the Transient Response of Laminated Anisotropic Shells, the 17th Israel
Convention on Mechanical Engineering, July 12-14, 1983, Tel Aviv University, Tev Aviv,
Israel.
5.
J.N. Reddy, Unilateral Contact Approach to Laminated Plates, the CISM Symposium on
Unilateral Problems in Structural Analysis, September 22-24, 1983, Ravello, Italy.
6.
J.N. Reddy, On Mixed and Displacement Finite Element Models of a Refined Shear
Deformation Theory for Laminated Anisotropic Plates, Fourth International Conference
on Applied Numerical Modeling, National Cheng Kung University, Tainan, Taiwan, Dec.
28-31, l984.
7.
J.N. Reddy, On Computational Schemes for Global-Local Stress Analysis, Workshop on

Computational Methods for Structural Mechanics and Dynamics, NASA Langley Research
Center, Hampton, VA, June 20-21, 1985.
8.
J.N. Reddy, Finite Element Models of Fluid Flow, International Symposium on

Variational Methods in Geosciences, University of Oklahoma, October 15-17, 1985.
9.
J.N. Reddy, Finite Element Models of Plates and Shells, Applications of Mathematics in
Mechanics, Ecole Nationale dngenieurs de Tunis, Monastir, Tunisia, July 17-19, 1986.
10.
J.N. Reddy, A Mixed, Updated Lagrangian Computational Model for Plane Elastic
Contact Problems, Symposium on Unilateral Problems in Mechanics, The International
Society for the Interaction of Mechanics and Mathematics, Universita di Roma 2, April 68, 1987.
11.
J.N. Reddy, On Refined Theories of Composite Laminates, Alcoa Laboratories,

Centennial Technical Seminar on Mechanics: Micromechanics to Product Design Symposium,
Hilton Head, SC, April 8-11, 1987.
12.
J.N. Reddy, An Overview of Computational Methods in Composites, Keynote

Lecture, the 10th Conference on Computer Methods in Mechanics, May 22-28, 1989, Rytro,
Poland.
13.
J.N. Reddy, A Computational Model for Study of Local Effects, Inter. Conference on
Engineering Software, December 4-7, 1989, Indian Institute of Technology, New Delhi,
India.
14.
J.N. Reddy, On New Developments in the Refined Theories of Plates, New

Developments in Structural Mechanics, University of Catania, Italy, July 4-6, 1990.
15.
J.N. Reddy, Modeling of Delamination in Composite Laminates Using a Layer-Wise

Plate Theory, Indo-US Workshop on Composites for Aerospace Applications, Bangalore,
India, July 23-27, 1990.
11
16.
J.N. Reddy, Current Research in the Modeling of Laminated Composite Structures,

EMRC's Conference and Lecture Program, Engineering Mechanics Research Corporation,
Troy, MI, Oct. 3, 1990.
17.
J.N. Reddy, Finite Element Modeling of Structural Vibrations: Recent Developments,

Keynote Lecture delivered at the International Congress on Recent Developments in Air- and
Structure-Borne Sound and Vibration, March 6-8, 1990, Auburn University, AL.
18.
J.N. Reddy, On the Modeling of Thick Composite Laminates, Keynote Lecture, the
First U. S. National Congress on Computational Mechanics, Chicago, IL, July 21-24, 1991.
19.
J.N. Reddy, Advances in the Modeling of Laminated Plates, Keynote Lecture, the First
International Conference on Computational Structures Technology, Heriot-Watt University,
Edinburg, U.K., August 20-22, 1991.
20.
J.N. Reddy, Global-Local Analysis of Composite Laminates Using Hierarchical Finite

Elements and Mesh Superposition, Keynote Lecture, the IBM Europe Institute on
Structural Analysis, Oberlech, Austria, July 20-24, 1992.
21.
J.N. Reddy, Analysis of Composite Laminates Using Variable Kinematic Finite

Elements, Keynote Lecture, the 7th Brazilian Symposium on Piping and Pressure Vessels,
October 7-9, 1992, Florianopolis, Santa Catarina, Brazil.
22.
J.N. Reddy, The Modeling of Composite Laminates: Intuition to Generality and Theory
to Practice, the Neelakantam Memorial Lecture presented at the Annual Convention of
the Aeronautical Society of India, December 11, 1992, Bangalore, India.
23.
J.N. Reddy, Global-Local Computational Methodologies for the Analysis of Composite

Laminates, Keynote Lecture, the International Congress on Computational Method in
Engineering, Shiraz, Iran, May 3-5, 1993.
24.
J.N. Reddy, On Computational Strategies for the Analysis of Thick Composites,

Keynote Lecture, the Advanced Technology on Design and Fabrication of Composite Materials
and Structures, Politecnico di Torino, Torino, Italy, May 24-28, 1993.
25.
J.N. Reddy, Recent Developments in the Modeling of Laminated Composite

Structures," Keynote Lecture, the Nonlinear Finite Element Analysis and ADINA, Boston,
MA, June 23-25, 1993.
26.
J.N. Reddy, An Evaluation of Equivalent-Single-Layer and Layerwise Theories of

Composite Laminates, Keynote Lecture, the Seventh International Conference on
Composite Structures, University of Paisley, Scotland, 5-7 July 1993.
27.
J.N. Reddy, Modeling of Composite Structures," Plenary Lecture, the Advanced Study
Institute on Computational Methods for Engineering Analysis and Design, Indian Institute of
Technology, Madras, India, August 2-11, 1993.
28.
J.N. Reddy, A Multiple Model Approach for Laminated Composite Structures,"

Keynote Lecture, the First Pan-Pacific Conference on Computational Engineering, Korea
Advanced Study Institute of Science and Technology, Seoul, Korea, November 1-5, 1993.
29.
J.N. Reddy, An Hierarchical Mulit-Model Approach to the Analysis of Laminated

Composite Structures, Keynote Lecture, the Third World Congress on Computational
Mechanics (WCCM III), Chiba, Japan, August 1-5, 1994.
30.
J.N. Reddy, Recent Developments in the Modeling of Composite Structures," Keynote

Lecture, presented at the Energy Technology Conference & Exhibition (ETCE), Houston,
January 28-February 2, 1996.
12
31.
J.N. Reddy, A Computational Methodology for Global-Local Analysis of Composite

Structures," Keynote Lecture, the Mathematics of Finite Elements and Applications IX
(MAFELAP 1996), Brunel University, Uxbridge, U.K., June 25-28, 1996.
32.
J.N. Reddy, Refined Theories and Computational Procedures for the Modeling of Smart
Composite Structures," Keynote Lecture, the First International Conference on Composite
Science and Technology, Durban, South Africa, June 18-20, 1996.
33.
J.N. Reddy, Computational Structural Dynamics: Present and Future," Keynote Lecture
the 67th Shock & Vibration Symposium, Monterey, CA, November 18-22, 1996.
34.
J.N. Reddy, Recent Developments in Mechanics of Composite Materials," Keynote

Lecture, the Second International Conference on the Application of Numerical Methods in
Engineering, Universiti Pertanian Malaysia, Malaysia, June 23-25, 1997.
35.
J.N. Reddy, Developments in Computational Structural Dynamics," Keynote Lecture,

the Sixth International Conference on Recent Advances in Structural Dynamics, The Institute
of Sound and Vibration Research, University of Southampton, England, July, 14-17 1997.
36.
J.N. Reddy, Recent Developments in Mechanics of Smart Structures," Plenary Lecture,

the Symposium on Mechanics of Composite Materials (Simpsio em Mecnica dos Materialis
Compsitos), Instituto de Engenharia Mecnica (IDMEC), Instituto Superior Tecnico
(IST), Lisbon, Portugal, July 22, 1997.
37.
J.N. Reddy, Theoretical Models and Computational Procedures for the Analysis of
Plate Structures, Karunesh Memorial Lecture of the 42nd Congress of the Indian Society of
Theoretical and Applied Mechanics (ISTAM), Regional Engineering College, Surat, Gujrat,
India, December 28-31, 1997.
38.
J.N. Reddy, Computational Mechanics: Current Trends and Future Directions,

Keynote Lecture, the 20th World Conference on the Boundary Element Method (BEM20)
University of Central Florida, Orlando, FL, August 19-21, 1998.
39.
J.N. Reddy, Computational Modeling of Local Stress Fields and Delamination Failures
in Composite Laminates, Keynote Lecture, the Integrity Reliability Failure, An
International Conference University of Porto, Portugal, July 19-22, 1999.
40.
J.N. Reddy, An Overview and Recent Developments in Vibrations of Laminated

Composite Plates and Shells, Keynote Lecture, the Asia-Pacific Vibration Conference '99
(A-PVC`99), Nanyang Technological University, Singapore, December 12-14, 1999.
41.
J.N. Reddy, Future Directions in Computational Methods and Simulations, Keynote

Lecture, the Fourth Asia-Pacific Conference on Computational Mechanics (APCOM`99),
National University of Singapore, Singapore, December 14-16, 1999.
42.
J.N. Reddy, Recent Developments and Future Directions in Theoretical and

Computational Mechanics, Keynote Lecture, the Twentieth Southeastern Conference on
Theoretical and Applied Mechanics (SECTAM XX), Callaway Gardens, Pine Mountain,
Georgia, April 16-18, 2000.
43.
J.N. Reddy, Developments in Structural Dynamics with Special Focus on Shear

Deformation Theories of Plates and Shells, Keynote Lecture, the International Conference
on Structural Stability and Dynamics, Taipei, Taiwan, December 7-9, 2000.
44.
J.N. Reddy, Developments in Theoretical and Computational Mechanics of Composite

Materials and Structures, Keynote Lecture, the National Conference on Theoretical and
Applied Mechanics, Taipei, Taiwan, December 10-11, 2000.
13
45.
J.N. Reddy, `À New Mathematical and Computational Basis for BVP and IVP,
Keynote Lecture, the Fifth World Congress on Computational Mechanics, Vienna, Austria,
July 7-12, 2002.
46.
J.N. Reddy, On Computational Modeling of Functionally Graded Materials and Smart

Structures, Keynote Lecture, the Second World Engineering Congress, Kuching, Sarawak,
Malaysia, July 22-25, 2002.
47.
J.N. Reddy, ``Computational Modeling of Advanced Materials and Structures, C. S.

Krishnamoorthy Memorial Lecture, Indian Institute of Technology, Madras, December
10, 2002.
48.
J.N. Reddy, The k-Version Finite Element Method: A New Computational Methodology
for Boundary Value Problems, Plenary Lecture, International Conference on Smart
Materials Structures and Systems, Indian Institute of Science, Bangalore, India, Dec 12-14,
2002.
49.
J.N. Reddy, An Accurate and Robust Computational Methodology for Structural

Dynamics Problems, Plenary Lecture, the International Conference on Structural Stability
and Dynamics, Singapore, December 16-18, 2002.
50.
J.N. Reddy, Computational Modeling of Advanced Materials and Structures, Keynote

Lecture, the VII National Congress on Applied and Computational Mechanics, vora,
Portugal, April 14-16, 2003.
51.
J.N. Reddy, Novel Computational Procedures for Modeling of Problems of Mechanics,

Seth Memorial Lecture, 48th ISTAM (Indian Society of Theoretical and Applied
Mechanics) Congress, Dec. 18-21, 2003, Birla Institute of Technology (BIT) Mesra,
Ranchi, INDIA.
52.
J.N. Reddy, A Robust Computational Methodology for Numerical Simulation of

Physical Processes, Guest and Plenary Lecture (and Guest of Honor) at the International
Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM
2004), Indian Institute of Technology, Kharagpur, India, December 28-30, 2004.
53.
J.N. Reddy, Computational Modeling of Materials and Structures and New

Computational Methodology, the US-Africa Workshop on Mechanics and Materials,
University of Cape Town, South Africa, January 23-28, 2005.
54.
J.N. Reddy, Advances in Computational Modeling of Materials and Structures, Key

Note Lecture, the Fifth International Conference on Composite Science & Technology
(ICCT05) and International Conference on Modeling, Simulation & Applied Optimization
(ICMSAO'05), American University of Sharjah, Sharjah (UAE), February 1-3, 2005.
55.
J.N. Reddy, A Refined Finite Element for Geometrically Nonlinear Analysis of Shell
Structures, Keynote Lecture, the 5th International Conference on Computation of Shell
and Spatial Structures June 1-4, 2005 Salzburg, Austria.
56.
J.N. Reddy, Refined Computational Models of Functionally Graded and Smart

Structures and Materials, Keynote Lecture, II ECCOMAS Thematic Conference on Smart
Structures and Materials, Instituto Superior Tcnico, Lisbon, Portugal, 18-21 July 2005.
57.
J.N. Reddy, Novel Computational Methods and Materials Modeling, Plenary Lecture,
XXVI Iberian Latin American Congress on Computational Methods in Engineering (CILAMCE
2005), October 19-21, 2005, Guarapari, Esprito Santo, Brazil.
14
58.
J.N. Reddy, A Consistent Shell Element for Nonlinear Analysis of Composite and
Functionally Graded Structures, Opening Plenary Lecture (and Guest of Honor) at
International Conference on Advances in Structural Dynamics and Its Applications (ICASDA2005), 7-9 December 2005, Visakhapatnam, Andhra Pradesh, India.
59.
J.N. Reddy, A Finite Deformation Shell Formulation for the Analysis of Composite and
Functionally Graded Material Structures, Symposium on Physics and Mechanics of
Advanced Materials, January 18-20, 2006, Singapore.
60.
J.N. Reddy, Role of Computational Engineering Science in Modeling of Physical

Phenomena, Symposium on Engineering Science, April 20, 2006, Singapore.
61.
J.N. Reddy, A Consistent Finite Element Model for Nonlinear Analysis of Composite
and Functionally Graded Shell Structures, Opening Plenary Lecture, at International
Conference on Composite Materials and Nano-Structures (IC2MS-06), April 26-29, 2006, Shah
Alam (Kaula Lumpur), Malaysia.
62.
J.N. Reddy, Nonlinear Analysis of Composite and FGM Shell Structures Using TensorBased Shell Elements, Keynote Lecture, III European Conference on Computational
Mechanics, Solids, Structures and Coupled Problems in Engineering, Laboratrio Nacional de
Engenharia Civil, (LNEC), Lisbon, Portugal, June 5-8, 2006.
63.
J.N. Reddy, Nonlinear Analysis of Functionally Graded Shell Structures Using TensorBased Shell Element, Opening Plenary Lecture, 5th International Conference on
Mechanics and Materials in Design (M2D2006), Porto, Portugal, July 24-26, 2006.
64.
J.N. Reddy, On Nonlinear Analysis of Composite and Functionally Graded Shell

Structures, Tenth East Asia Pacific Conference on Structural Engineering and Construction,
August 2-4, 2006, Bangkok, Thailand.
65.
J.N. Reddy, Computational Models of Viscous Flows and Shell Structures, Opening
Plenary Lecture, International Conference on Enhancement and Promotion of Computational
Methods in Engineering Science and Mechanics, Changchun, China, Aug 10-12, 2006.
66.
J.N. Reddy, Nonlinear Analysis of Composite and FGM Shell Structures Using TensorBased Shell Elements, International Workshop in Mechanics of Composites, Bad Herrenab,
Germany, November 26-29, 2006.
67.
J.N. Reddy, Forty Years of Significant Developments in Mechanics of Composite

Materials and Structures" Special Invited Lecture, International Workshop in Mechanics of
Composites, Bad Herrenab, Germany, November 26-29, 2006.
68.
J.N. Reddy, Computational Engineering Science: The Third Scientific Methodology for
the 21st Century and Beyond, B. R. Seth Memorial Lecture at the 51st Congress of Indian
Society of Theoretical and Applied Mechanics (ISTAM), December 18-21, 2006, Andhra
University, Visakhapatnam, INDIA.
69.
J.N. Reddy, The Finite Element Method in Structures and Beyond, Plenary Lecture,
SPDC ASME USB (Student Professional Development Conference), University of Simon
Bolivar, Caracas, Venezuela, May 9-13, 2007.
70.
J.N. Reddy, Coupled Blood Arterial Wall Analysis Using Fluid Biphasic Interface
Models (with Ginu Unnikrishnan and Vinu U Unnikrishnan), Keynote Lecture
presented in Mechanics of Nano-, Bio- and Cellular Materials session at McMat 2007, ASME
Applied Mechanics and Materials Conference, June 3-7, 2007, University of Texas at Austin,
Austin, Texas.
15
71.
J.N. Reddy, Nonlinear Analysis of Composite and FGM Shells using Tensor-Based
Finite Elements, (with R. A. Arciniega), Keynote Lecture, The Fifth International
Conference on Nonlinear Mechanics (ICNM-V), June 11-14, 2007, Shanghai University,
Shanghai, China.
72.
J.N. Reddy, Engineering Science: Educating Engineer-Scientists, Lecture presented on

the occasion of the appointment of Consultant Professor at South China University of
Technology, Guangzhou, June 14, 2007.
73.
J.N. Reddy, Continuum Modeling of the Cell, Second GEM4 Summer School on Cell and
Molecular Mechanics in Biomedicine with a focus on cancer (in connection with the GEM4
Conference on Cancer 2007), June 25-July 6, 2007, National University of Singapore.
74.
J.N. Reddy, Role of Engineering Science in Education with Special Focus on Modeling
of Nanosystems, Teaching Nanoscience and Nanoengineering at International Conference
on Materials for Advanced Technologies 2007, 1-6 July 2007, Suntec Singapore
International Convention and Exhibition Centre, Singapore.
75.
J.N. Reddy, A New Mathematical and Computational Framework for BVP and IVP,
Keynote Lecture, delivered in the session The k-Version of the Finite Element Method and hp-k Adaptive Processes at the 9th US National Congress on Computational Mechanics, San
Francisco, CA, July 22-26, 2007.
76.
J.N. Reddy, Tensor-Based Shell Element and Modeling of Biological Cells, Plenary
Lecture (and Guest of Honor), the International Conference on Recent Developments in
Structural Engineering (RDSE-2007), Manipal Institute of Technology, Manipal, India, 29
August 1 September, 2007.
77.
J.N. Reddy, Simulation Based Computational Engineering Science: Least-Squares

FEM, Lindberg Lecture Series, Department of Mechanical Engineering, University of
Wisconsin, Madison, September 27, 2007.
78.
J.N. Reddy, A First-Order Shell Theory with Thickness Stretch and Locking-Free Shell
Finite Element, Opening Plenary Lecture (and Chief Guest), International Conference
on Computer Aided Engineering, December 13-16, 2007, Indian Institute of TechnologyMadras, Chennai, India.
79.
J.N. Reddy, Thermomechanical Analysis of FGM Shells, (with Roman A. Arciniega), a

Keynote Lecture presented at the Sixth International Conference on Computation of Shell &
Spatial Structures (Spanning Nano to Mega), International Association of Shell Structures
(IASS) International Association of Shell Structures (IASS) and International Association
of Computational Mechanics (IACM), Cornell University, Ithaca, May 28-31, 2008.
80.
J.N. Reddy, Computational Modeling of Glucose Distribution in Hollow Fiber

Membrane Bioreactors, (with V. U. Unnikrishnan and G.U. Unnikrishnan), a Keynote
Lecture presented at the Sixth International Conference on Computation of Shell & Spatial
Structures (Spanning Nano to Mega), International Association of Shell Structures (IASS)
and International Association of Computational Mechanics (IACM), Cornell University,
Ithaca, May 28-31, 2008.
81.
J.N. Reddy, Multiscale Computational Analysis of Biomechanical Systems, (with V. U.

Unnikrishnan and G.U. Unnikrishnan) Invited Lecture presented at the IUTAM
Symposium on Multi-Functional Material Structures and Systems, Indian Institute of Science,
Bangalore, INDIA, 10-13 December 2008.
16
82.
J.N. Reddy, Multiscale Analysis of Biomaterials and Nanostructures, Plenary Lecture

and (and Guest of Honor), International Conference on Computational Methods in
Engineering and Sciences, January 8-10, 2009, Hyderabad, India.
83.
J.N. Reddy, Analysis of Composite and FGM Shells Using a Refined Shear Flexible
Shell Finite Element, Bert Lecture in the School of Aerospace and Mechanical
Engineering, University of Oklahoma, Norman, March 6, 2009.
84.
J.N. Reddy, Modeling and Simulation of Complex Structures: From Physical to

Biological Systems, The 2009 Landis-Epic Lecture, University of Pittsburgh Department
of Civil and Environmental Engineering, Friday March 20, 2009, Frick Fine Arts
Auditorium, Pittsburgh.
85.
J.N. Reddy, Nonlinear Analysis of Laminated Composite Structures Using a Refined

Shell Finite Element, Distinguished Lecture in the Department of Mechanical
Engineering, University of West Virginia, Morgantown, Mar 27, 2009.
86.
J.N. Reddy, Micromechanics Based Biphasic Model Of Biological Cells, (with G.U.
Unnikrishnan, V. U. Unnikrishnan), Keynote Lecture presented in the Symposium on Cell
& Molecular Biomechanics - Experiments & Computation at International Conference on
Computational and Experimental Engineering Sciences (ICCES09), Phuket, Thailand, 8-13
April 2009.
87.
J.N. Reddy, Developments in the Mathematical Modeling and Numerical Simulation of

Composite Materials and Structures, Plenary Lecture presented at the IISc Centenary
International Conference and Exhibition on Aerospace Engineering (ICEAE2009), Indian
Institute of Science, Bangalore, India, 18 22 May 2009.
88.
J.N. Reddy, Numerical modeling of complex structures: shells and cells, Opening
Plenary Lecture, at the 3rd International Conference on Advanced Computational Engineering
and Experimenting (ACE-X 2009), Rome, Italy, 22-23, June, 2009.
89.
J.N. Reddy, Multiscale Thermal Analysis of Nanostructures (with V. U. Unnikrishnan

and D. Banerjee), Keynote Lecture at the Third International Conference on Integrity,
Reliability and Failure: Challenges and Opportunities (IRF2009), University of Porto, Porto,
Portugal, July 20-24, 2009.
90.
J.N. Reddy, Computational Mechanics: Present and Future, Opening Plenary Lecture
at the VII Congreso Colombiano de Modelamiento Numerico, Universidad de los
Andes, Bogota, Colombia, August 10-14, 2009.
91.
J.N. Reddy, Recent Developments in the Analysis of Carbon Nanotubes and Nonlinear
Shell Theories, (with Romn A. Arciniega and C. M. Wang) , Opening General Lecture
presented at the 9th Conference on Shell Structures, Theory and Applications, Gdask-Jurata,
Poland, 14-16, October 2009.
92.
J.N. Reddy, Nonlinear Analysis of Laminated Composite and FGM Structures Using a
Refined Shell Element, Plenary Lecture (Track 11), 2009 ASME International Engineering
Congress & Exposition, November 18, 2009, Lake Buena Vista, Florda.
93.
J.N. Reddy, Multiscale Analysis and Nutrient Transport in Carbon Nanotube

Reinforced Nanofiber Bioreactor, (with V. U. Unnikrishnana and G.U. Unnikrishnan),
Plenary Lecture and Honorary Chairman, 2nd International Symposium on Computational
Mechanics and 12th International Conference on Enhancement and Promotion of Computational
Methods in Engineering and Science, Nov 30 Dec 3, 2009, Hong Kong Macau, China.
17
94.
J.N. Reddy and G. S. Payette, Least-Squares Finite Element Technology in Fluid

Dynamics and Structural Mechanics, Opening Plenary Lecture,4th International
Conference on Advanced Computational Engineering and Experimenting (ACE-X2010) 08-09
July 2010, Hotel Concordia La Fayette, Paris, France.
95.
J.N. Reddy, K.S. Surana, and G. S. Payette, Least-Squares Finite Element Models and
the k_version FEM: an Overview and Recent Developments, Semi-Plenary Lecture, 9th
World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational
Mechanics (WCCM/APCOM 2010), Sydney, Australia, 19 23 July 2010.
96.
J.N. Reddy, Computational Modeling of Materials and Structures: Composite Shells

and Biological Cells, Keynote Lecture, International Conference on Applied Mechanics,
Materials and Manufacturing (ICAMMM), Sultan Qaboos University, Muscat, Oman, 13
15 December 2010.
97.
J.N. Reddy, V. U. Unnikrishnan, and G.U. Unnikrishnan, Multiscale Modelling of

Biological Systems, Plenary Lecture, Second International Conference on Multiscale
Modeling and Simulation (ICMMS 2010), Guangzhou, China, 17 19 December 2010.
98.
J.N. Reddy, Nanocomposites, Plenary Lecture, International Conference on Composites

for 21st Century: Current and Future Trends, Indian Institute of Science, Bangalore, Jan 4-7,
2011.
99.
J.N. Reddy, Multiscale Processes in Analysis of Nanotube Reinforced Tissue

Engineering Bioreactors, Plenary Lecture, 2nd International Conference on Mathematical
and Computational Biomedical Engineering - CMBE2011, March 30 - April 1, 2011, Goerge
Mason University, Washington D.C.
100.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Biomechanics of Breast

Density and Collagen Content in Cancer Formation, Invited Lecture, Workshop on
Microscale Modeling in Biomechanics and Mechanobiology, Hotel Vila Gal, Ericeira, Portugal,
May 30 - June 1, 2011.
101.
J.N. Reddy, Modelling of Composite and Functionally Graded Structures: Theories and
Computational Models, Plenary Lecture, 16th International Conference on Composite
Structures (ICCS 16), June 28-30, 2011, University of Porto, Porto, Portugal
102.
J.N. Reddy and A. Muliana, Thermomechanical Response of Functionally Graded

Structures, Plenary Lecture, 5thInternational Conference on Advanced Computational
Engineering and Experimenting, ACE-X 2011 Algarve, Portugal, 3 -6 July, 2011.
103.
J.N. Reddy, V. U. Unnikrishnan, and R. Arciniega, Analysis of Composite and

Multifunctional Materials: Recent Developments, Guest and Opening Plenary Lecture,
International Symposium on Advances in Applied Mechanics and Modern
InformationTechnology 2011 (AAM&MIT'11), 22-23 Sep. 2011, Baku , Azerbaijan.
104.
G. Payette and J.N. Reddy, Recent Developments in Shell Finite Elements for Large
Deformation Analysis," Semi-Plenary Speaker, Third International Symposium on
Computational Mechanics (ISCM III) in conjunction with the Second Symposium on
Computational Structural Engineering (CSE II), Taipei, Taiwan, 5-7 December 2011.
105.
J.N. Reddy, Modified Couple Stress Theories of Functionally Graded Shear Deformable
Beams and Plates, Plenary Lecture, Fourth International Conference on Structural Stability
and Dynamics, Malavia National Institute of Technology, Jaipur, India, 4-6 January 2012.
18
106.
J.N. Reddy, Numerical Simulations: The Third Scientific Methodology, Plenary

Lecture, Pragyan 2012, National Institute of Technology, Trichy, India, 23-26 Feb 2012.
107.
J.N. Reddy and Gregory S. Payette, A Higher-Order Spectral/hp Shell Finite Element
for the Nonlinear Analysis of Laminated Composites and Functionally Graded Elastic
Shell Structures, Opening Plenary Lecture, International Iranian Mechnical Engineering
Conference, Shiraz University, May 14-17, 2012, Shiraz, Iran.
J.N. Reddy A Nonlinear Modified Couple Stress-Based Theories of Functionally
Graded Beams and Plates, Opening Technical Plenary Lecture, International Conference
on Mechanics of Nano, Micro and Macro Composite Structures, 18-20 June 2012, Politecnico
di Torino, Italy.
G. S. Payette and J.N. Reddy, "A General Shell Element with Thickness Stretch for Large
Deformation Analysis of Composite Structures," Plenary Lecture, SOMIM Conference,
Salamanca, Mexico, 19-21 September 2012.
J.N. Reddy Modified Couple Stress-Based Theories of Functionally Graded Beams and
Plates, Plenary Lecture, International Conference in Innovations in Design and
Manufacturing (InnDeM 2012), 5-7 Dec 2012, IIITDM Jabalpur, India.
G. S. Payette and J.N. Reddy A General Shell Finite Element for Large Deformation
Analysis of Composite Structures, Opening Plenary Lecture, International Congress on
Computational Mechanics and Simulation (ICCMS2012), Indian Institute of Technology,
Hyderabad, India, 10-12, Decmber 2012.
J.N. Reddy, Spectral Finite Element Technology for Large Deformation Analysis of
Composite Shells, Keynote Lecture, Indo-US Workshop on Recent Developments in
Composite Materials and Structures, JFWTC- GE Global Tech. Center, Bangalore, India,
March 18-20, 2013.
108.
109.
110.
111.
112.
113.
114.
115.
116.
117.
118.
J.N. Reddy, G. S. Payette, and V. Vallala, A Spectral/hp Shell Finite Element for the
Nonlinear Analysis of Laminated Composites and Functionally Graded Elastic
Structures, Opening Guest and Plenary Lecture, the Fourth International Symposium on
Solid Mechanics - MecSol 2013, Porto Alegre, Rio Grande do Sul, Brazil, 18-19 April 2013.
J.N. Reddy, G. S. Payette, and V. Vallala, Spectral/hp Approximations in the Finite
Element Analysis of Solid and Fluid Mechanics Problems, Plenary Lecture, Fourth
International Conference on Mathematical and Computational Applications (ICMCA 2013),
June 11-13, 2013, Manisa, Turkey.
J.N. Reddy, Refined Theories and Computational Models of Composite Beams, Plates,
and Shells, Plenary Lecture, the 17th International Conference on Composite Structures
(ICCS/17), at the University of Porto, Porto, Portugal, 17-21 June 2013.
J.N. Reddy, On Nonlocal Elasticity and Peridynamics with Applications to Beams and
Plates, Plenary Lecture, 6th ECCOMAS Thematic Conference on Smart Structures and
Materials (SMART2013), 24-26 June 2013, Politecnico di Torino, Torino, Italy.
J.N. Reddy and A. R. Srinivasa, On Microstructural Length Scales and Discrete
Peridynamics for Beams and Plates, Opening Talk (Keynote Lecture) presented in a
session on nano systems at the 7th International Conference on Advanced Computational
Engineering and Experimenting (ACEX2013 ), 1-4 July 2013, Madrid, Spain.
Greg Payette, V. Vallala, and J.N. Reddy, Higher-Order Spectral/hp Finite Element
Technology for Large Deformation Analysis of Shell Structures, Plenary Lecture
presented at the 2nd International Conference on Advances in Computational Modeling and
Simulation, 17-19 July 2013, Kunming, China.
19
119.
120.
121.
122.
J.N. Reddy and A. R. Srinivasa, On Rotation Gradient Dependent Elasticity and

Specialization to Beams and Plates with Moderate Rotation, Plenary Lecture presented
at the 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM2013), 23-26 July
2013, Montreal, Canada.
J.N. Reddy Incorporation of Material Length Scales in Structural Theories of Beams and
Plates, Plenary Lecture, International Conference on Science and Technology of
Heterogeneous Materials and Structures, Wuhan University, Wuhan, China, 11-13 October
2013.
J.N. Reddy and A. R. Srinivasa, On Nonlocal Gradient Elasticity Models with
Application to Beams and Plates, Key-Note Lecture, International Conference on
Computer Aided Engineering, Indian Institute of Technology Madras, Chennai, India, 1921 December 2013.
A. Srinivasa and J.N. Reddy Probablistic Peridynamics Enhanced Finite Element
Modeling of Damage, Plenary Lecture, First International Conference on Mechanics of
Composites, State University of New York at Stony Brook, Long Island, June 8-12, 2014.
20
ARCHIVAL PUBLICATIONS
BOOKS
1.
J. T. Oden and J.N. Reddy, Variational Methods in Theoretical Mechanics, Springer-Verlag,

NY, 1976; Second Edition, 1982.
2.
J. T. Oden and J.N. Reddy, A Mathematical Theory of Finite Elements, John Wiley & Sons,
New York, 1976.
3.
J.N. Reddy and M. L. Rasmussen, Advanced Engineering Analysis, John Wiley, New York,
1982; reprinted by Krieger, Melbourne, FL, 1990.
4.
J.N. Reddy, An Introduction to the Finite Element Method, McGraw-Hill, New York, 1984.
An Introduction to the Finite Element Method, Second Edition, McGraw-Hill, NY, 1993.
An Introduction to the Finite Element Method, Third Edition, McGraw-Hill, NY, 2006.
Introduction to the Finite Element Method, Fourth Edition, McGraw-Hill, NY, in
preparation.
Solutions Manual for Introduction to the Finite Element Method, Fourth Edition,
McGraw-Hill, NY, in preparation.
5.
J.N. Reddy, Energy and Variational Methods in Applied Mechanics, John Wiley, NY, 1984.
Energy Principles and Variational Methods in Applied Mechanics, Second Edition, John
Wiley, NY, 2002.
Solutions Manual to Energy Principles and Variational Methods in Applied Mechanics,
Second Edition, John Wiley, NY, 2002.
6.
J.N. Reddy, Applied Functional Analysis and Variational Methods in Engineering, McGrawHill, NY, 1986; reprinted by Krieger, Melbourne, FL, 1991.
7.
O. O. Ochoa and J.N. Reddy, Finite Element Analysis of Composite Laminates, Kluwer
Academic Publishers, The Netherlands, 1992.
8.
J.N. Reddy and A. Miravete, Practical Analysis of Laminated Composite Structures, CRC
Press, FL, 1995.
9.
J.N. Reddy, Mechanics of Laminated Composite Plates: Theory and Analysis, CRC Press, Boca
Raton, FL, 1996.
Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press, Boca
Raton, FL, Second Edition, 2004.
Solutions Manual to Mechanics of Laminated Composite Plates and Shells: Theory and
Analysis, CRC, Boca Raton, FL, 2004.
10.
J.N. Reddy and D. K. Gartling, The Finite Element Method in Heat Transfer and Fluid
Dynamics, CRC Press, FL, 1997.
The Finite Element Method in Heat Transfer and Fluid Dynamics, Second Edition, CRC
Press, FL, 2001.
The Finite Element Method in Heat Transfer and Fluid Dynamics, Third Edition, CRC
Press, FL, 2010.
21
11.
J.N. Reddy, Theory and Analysis of Elastic Plates, Taylor & Francis, Philadelphia, PA, 1999.
Theory and Analysis of Elastic Plates and Shells, Second Edition, Taylor & Francis,
Philadelphia, PA, 2007.
Solutions Manual to Theory and Analysis of Elastic Plates and Shells, Second Edition,
Taylor & Francis, Philadelphia, PA, 2007.
12.
C. M. Wang, J.N. Reddy, and K.H. Lee, Shear Deformation Theories of Beams and Plates.
Relationships with Classical Solution, Elsevier, U.K., 2000.
13.
J.N. Reddy, An Introduction to Nonlinear Finite Element Analysis, Oxford University Press,
Oxford, U.K., 2004.
An Introduction to Nonlinear Finite Element Analysis, Second Edition, Oxford
University Press, Oxford, U.K., 2014 (in preparation).
14.
C. M. Wang, C. Y. Wang, and J.N. Reddy, Exact Solutions for Buckling of Structural
Members, CRC Press, Boca Raton, FL, 2005.
15.
J.N. Reddy, An Introduction to Continuum Mechanics with Applications, Cambridge

University Press, New York, 2008
An Introduction to Continuum Mechanics, Second Edition, Cambridge University Press,
New York, 2013.
16.
J.N. Reddy, Principles of Continuum Mechanics. A Study of Conservation Principles with

Applications, Cambridge University Press, New York, 2010.
Principles of Continuum Mechanics. A Study of Conservation Principles with Applications,
Second Edition, Cambridge University Press, New York, 2014 (in preparation).
17.
R. T. Fenner and J.N. Reddy, Mechanics of Solids and Structures, 2nd ed., CRC Press, Boca
Raton, Florida, 2012.
18.
S. Roy and J.N. Reddy, Computational Modelling of Polymer Composites, A Study of Creep
and Environmental Effects, CRC Press, Boca Raton, Florida, 2013.
19.
K.S. Surana and J.N. Reddy, Continuum Thermodynamics, Cambridge Univertsity Press,
New York, in preparation.
MONOGRAPHS EDITED
1.
Penalty Finite Element Methods in Mechanics, AMD-Vol. 51, American Society of

Mechanical Engineers, NY, 1982.
2.
Finite Element Analysis for Engineering Design, (with C. S. Krishnamoorthy and K. N.

Seetharamu), Lecture Notes in Engineering, Vol. 37, Springer-Verlag, Berlin, 1988.
3.
Mechanics of Composite Materials and Structures, (with J. L. Teply), AMD-Vol. 100, ASME,
New York (papers presented at the Third Joint ASCE/ASME Mechanics Conference), La
Jolla, CA, July 9-12, 1989), 1989.
4.
Nonlinear Vibrations, Stability and Dynamics of Structures and Mechanisms, (with A. H.

Nayfeh and D. T. Mook), Pergamon Press, Oxford, 1990 (A special issue of the J. NonLinear Mechanics, Vol. 25, No. 1, 1990).
5.
Proceedings of the Indo-U.S. Workshop on Composites for Aerospace Applications, Parts I and
II, (with A. V. Krishna Murty), Indian Institute of Science, Bangalore, India, July 1990.
22
6.
Enhancing Analysis Techniques for Composite Materials, (with L. Schwer and A. Mal), NDEVol. 10, American Society of Mechanical Engineers, NY, 1991.
7.
Advances in Finite Element Analysis in Fluid Dynamics-1991, (with M. N. Dhaubhadel and

M. S. Engelman), FED-Vol. 123, American Society of Mechanical Engineers, NY, 1991.
8.
Advances in Finite Deformation Problems in Materials Processing and Structures, (with N.

Chandra), AMD-Vol. 125, ASME, NY, 1991.
9.
Composite Structures: Testing, Analysis, and Design, (with A. V. Krishna Murty), Narosa,
New Delhi, 1992.
10.
Local Mechanics Concepts for Composite Material Systems, Proceedings of the IUTAM
Symposium held in Blacksburg, Virginia, October 1991, (with K. L. Reifsnider), SpringerVerlag, New York, 1992.
11.
Advances in Finite Element Analysis in Fluid Dynamics-1992, (with M. N. Dhaubhadel and

M. S. Engelman), FED-Vol. 137, ASME, New York, 1992.
12.
Mechanics of Composite Materials, (Selected Works of Nicholas J. Pagano), Kluwer

Academic Publishers, The Netherlands, 1994.
13.
Proceedings of the Third U.S. National Congress on Computational Mechanics, Department of

Mechanical Engineering, Texas A&M University, College Station, 1995.
14.
Advances in Computational Mechanics, Part I (In Honour of J. Tinsley Oden on the

Occasion of His 60th Birthday), L. Demkowicz and J.N. Reddy (eds.), Elsevier,
Amsterdam, 1997.
15.
Advances in Computational Mechanics, Part II (In Honour of J. Tinsley Oden on the

Occasion of His 60th Birthday), L. Demkowicz and J.N. Reddy (eds.), Elsevier,
Amsterdam, 1997.
16.
Special Issue of Mechanics of Advanced Materials and Structures (Dedicated to Y. Stavsky),

edited by J.N. Reddy, C. W. Bert, and I. Elishakoff, Vol. 11, Nos. 4-5, 2004.
17.
Proceedings of the International Conference in Structural Stability and Dynamics, 19-22 June
2005, Gaylord Palms Resort and Convention Center, Kissimmee, Florida (J.N. Reddy,
editor); only electronic version is available.
Structural Stability and Dynamics, Proceedings of the International Conference held
during 4-6 January 2012 at Malavia National Institute of Technology, Jaipur, India, 2012;
edited by J.N. Reddy and M.K. Shrimali, Excel India Publishers, New Delhi, India, 2012.
18.
19.
Proceedings of the IJSSD Symposium 2012 on Progress in Structural Stability and Dynamics,
14-16 April 2012, Nanjing China, edited by C. M. Wang, Y. B. Yang, and J.N. Reddy,
Southeast University Press, Nanjing, China, 2012.
BOOK CHAPTERS
1.
On the Finite Element Method with Penalty for Incompressible Fluid Flow Problems,
The Mathematics of Finite Elements with Applications III, J. R. Whiteman (ed.), Academic
Press, London, pp. 227-285, 1979.
2.
A Comparative Study of Numerical Schemes for the Solution of Two-Dimensional

Advection Flows, (with J. D. Warburton), Nonlinear Partial Differential Equations in
Engineering and Applied Science, R. L. Sternberg, et al. (eds.), Marcel Dekker, NY, pp. 187212, 1980.
23
3.
A Finite Element Approach to Combined Conductive and Radiative Heat Transfer in a

Planar Medium, (with R. Fernandes and J. Francis), Heat Transfer and Thermal Control,
A. L. Crosbie (ed.), Progress in Astronautics and Aeronautics, Vol. 78, pp. 92-109, 1980.
4.
Analysis of Layered Composite Plates Accounting for Large Deflections and Transverse
Shear Strains, Recent Advances in Nonlinear Computational Mechanics, E. Hinton, D. R. J.
Owen and C. Taylor (eds.), Pineridge Press, Swansea, U.K., pp. 155-202, 1982.
5.
Mechanics of Bimodular Composite Structures, (with C. W. Bert) in Mechanics of

Composite Materials: Recent Advances, Z. Hashin and C. T. Herakovich (eds.), Pergamon
Press, pp. 323-337, 1983 (Proceedings of IUTAM Symposium held at Virginia
Polytechnic Institute and State University, June 1982).
6.
Penalty Function Methods in Conduction and Convection Heat Transfer, Numerical

Methods in Heat Transfer, Vol. 2, R. W. Lewis, K. Morgan, and B. A. Schrefler (eds.), John
Wiley, London, pp. 145-178, 1983.
7.
On a Third-Order Shear Deformation Theory of Laminated Composite Plates,

Developments in Theoretical and Applied Mechanics, Vol. XII, (selected papers from the
proceedings of the Twelfth Southeastern Conference on Theoretical and Applied
Mechanics, May 10-11, 1984), Auburn University, AL, pp. 397-420, 1985.
8.
On Delamination in Plates: A Unilateral Contact Approach, (with A. Grimaldi),

Unilateral Problems in Structural Analysis, G. Del Piero and F. Maceri (eds.), CISM Courses
and Lectures No. 288, Springer-Verlag, NY, pp. 299-314, 1985.
9.
On Mixed Finite-Element Formulations of a Higher-Order Theory of Composite

Laminates, Finite Element Methods for Plate and Shell Structures, T. J. R. Hughes and E.
Hinton (eds.), Pineridge Press, U.K., pp. 31-57, 1986.
10.
The Penalty-Finite Element Method, Finite Element Handbook, H. Kardestuncer (ed.),

McGraw-Hill, NY, p. 2.233, 1987.
11.
Standard Results for Linear-Elliptic Boundary-Value Problems, Finite Element

Handbook, H. Kardestuncer (ed.), McGraw-Hill, NY, p. 2.315, 1987.
12.
Finite-Element Analysis of Adhesive Joints, Adhesive Bonding, (L. H. Lee, ed.), Ch. 21,
pp. 359-394, Plenum Press, NY, 1991.
13.
Recent Developments and Trends in Computational Natural Convection, (with D. H.

Pelletier and J. A. Schetz), Annual Review of Numerical Fluid Mechanics and Heat Transfer,
Vol. 2, C. L. Tien and T. C. Chawla (eds.), Hemisphere, Washington, DC, pp. 39-85, 1989.
14.
Mathematics, Chapter 2 of Eshbach's Handbook of Engineering Fundamentals, B. Tapley

(ed.), 4th ed., John Wiley, New York, 1990.
The following chapters are contributions to Finite Element Analysis for Engineering Design, J.N. Reddy, C. S.
Krishnamoorthy and K. N. Seetharamu (eds.), Springer-Verlag, Berlin, 1988:
15.
Chapter 1: `À Review of the Equations of Mechanics, pp. 1-15.
16.
Chapter 2: ``Variational Formulations and Methods, pp. 16-39.
17.
Chapter 3: An Introduction to the Finite Element Method, pp. 41-69.
18.
Chapter 10: Two-Dimensional Theories of Plates, pp. 249-270.
19.
Chapter 14: Mechanics of Composite Structures, pp. 338-359.
20.
Chapter 15: Analysis of Laminated Composite Structures, pp. 361-423.
24
21.
On the Generalization of Displacement-Based Laminate Theories, Mechanics PanAmerica 1989, (selected and revised proceedings of the January 1989 Rio de Janeiro PanAmerican Congress of Applied Mechanics), C. R. Steele, A. W. Leissa, and M. R. M.
Crespo da Silva (eds.), ASME Press, NY, pp. S213-S222, 1989.
22.
A Unified Formulation of Micromechanics Models of Fiber-Reinforced Composites,

(with J. L. Teply), Inelastic Deformation of Composite Materials (IUTAM Symposium, Troy,
NY, May 29-June 1, 1990), G. J. Dvorak (ed.), Springer-Verlag, NY, pp. 341-370, 1990.
23.
On the Modeling of Free-Edge Stress Fields and Delaminations in Thick Composite

Laminates, (with D. H. Robbins ), Composite Structures, Testing, Analysis, and Design,
J.N. Reddy and A. V. Krishna Murty (eds.), Narosa, New Delhi, pp. 33-74, 1992.
24.
Analysis of Interlaminar Stresses and Failures Using a Layer-Wise Laminate Theory,

(with D. H. Robbins and Y. S. N. Reddy), Local Mechanics Concepts for Composite Material
Systems (IUTAM Symposium, Blacksburg, VA, October 1991), J.N. Reddy and K. L.
Reifsnider (eds.), Springer-Verlag, NY, pp. 307-339, 1992.
25.
Three-Dimensional Finite Element Analysis of Non-Newtonian Fluid Flows, (with M.

P. Reddy), Computational Fluid Dynamics Techniques, W. G. Habashi and M. M. Hafez
(eds.), Gordon and Breach, NY, pp. 437-485, 1995.
26.
Numerical Simulation of Flows of Non-Newtonian and Viscoelastic Fluids, (with D. K.

Gartling), Computational Fluid Dynamics Review 1995, M. Hafez and K. Oshima (eds.),
John Wiley, NY, pp. 731-754, 1995.
27.
Modeling Delamination Using a Layerwise Element with Enhanced Strains, (with C.

M. Dakshina Moorthy), in Damage Mechanics in Engineering Materials, G. Z. Voyiadjis, J.W.W. Ju, and J.-L. Chaboche (eds.), Elsevier, NY, 1998.
28.
On Locking-Free Shear Deformable Beam Finite Elements, in Advances in

Computational Mechanics, pp. 113-132, L. Demkowicz and J.N. Reddy (eds.), Elsevier,
Amsterdam, 1997.
29.
A Hybrid BE/FE Method for the Analysis of Laminated Structures, (with F. T.

Kokkinos), Chapter 7 in Properties of Discontinuous Materials, M. Bush (ed.), Elsevier, NY,
1998.
30.
Theory and Analysis of Laminated Composite Plates, Chapter 1 in Mechanics of

Composite Materials, C. A. Mota Soares, et al. (eds.), Kluwer , Netherlands, pp. 1-79, 1999.
31.
On Shear Deformation Plate Solutions: Relationships to the Classical Solutions, in

Advances in the Mechanics of Plates and Shells, D. Durban, D. Givoli, and J. G. Simmonds
(eds.), Kluwer , The Netherlands, pp. 259-276, 2001.
32.
J.N. Reddy, `Àn Introduction to the Finite Element Method" in Dynamics of Earths Fluid
System, S. N. Rai, D. V. Ramana, and A. Magnik (eds.), Oxford & IBH Publishing Co.,
New Delhi, India, pp. 199-226, 2002.
33.
J.N. Reddy, Finite Element Models of Flows of Viscous Incompressible Fluids, in

Dynamics of Earths Fluid System, S. N. Rai, D. V. Ramana, and A. Magnik (eds.), Oxford
& IBH Publishing Co., New Delhi, India, pp. 227-251, 2002.
34.
J.N. Reddy and D. H. Robbins, Jr., Computational Modelling of Damage and Failures in
Composite Laminates, Chapter 13 in Encyclopedia of Computational Mechanics, Vol. 2:
Solids and Structures, E. Stein, R. de Borst, and T. J. R. Hughes (eds.), John Wiley,
Chichester, UK, pp. 431-460, 2004.
25
35.
G. T. Lim, J.N. Reddy, and H. -J. Sue, Finite Element Modeling for Scratch Damage of
Polymers, Stimuli-Responsive Polymeric Films and Coatings, ACS Book Series, Vol. 912, pp.
166-180, 2005.
36.
J.N. Reddy and R. A. Arciniega, Mechanical and Thermal Buckling of Ceramic-Metal

Plates, Chapter 6 in Analysis and Design of Plated Structures, Statics, N. E. Shanmugam
and C. M. Wang (eds), Wood-Head Publishing, Oxford, UK, pp. 138-160, 2005.
37.
J.N. Reddy and R. A. Arciniega, Vibration of Functionally Graded Ceramic-Metal

Plates, in Analysis and Design of Plated Structures: Dynamics, N. E. Shanmugam and C.
M. Wang (eds), Wood-Head Publishing, Oxford, UK, pp. 293-321, 2007.
38.
J.N. Reddy, V. U. Unnikrishnan, and G.U. Unnikrishnan, Computational

Homogenization of Polymeric Nanofiber Scaffolds and Biological Cells, in Advances in
Mathematical Modeling and Experimental Methods for Materials and Structures: The Jacob
Aboudi Volume (Solid Mechanics and Its Applicfations), Rivka Gilat and Leslie Banks-Sills
(eds), Springer-Verlag, Berlin, 2009.
39.
V.U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Multiscale Computational

Analysis of Biomechanical Systems, in IUTAM Symposium on Multi-Functional Material
Structures and Systems (Proceedings of the IUTAM Symposium held at Indian Institute of
Science, Bangalore, December 10-12, 2008), B. Dattaguru, S. Gopalakrishnan, and V .K .
Aatre (eds), Springer-Verlag, Berlin, Vol. 19, pp. 123-131, 2010.
40.
J.N. Reddy, R. A. Arciniega, V. U. Unnikrishnan, and G.U. Unnikrishnan, Numerical

Modeling of Complex Structures: Shells and Biological Cells, in Materials with Complex
Behaviour: Modelling, Simulation, Testing, and Applications, A. Ochsner et al. (eds.),
Springer-Verlag, Berlin, pp. 127-137, 2010.
41.
J.N. Reddy, R. A. Arciniega, and F. Moleiro, Finite Element Analysis of Composite

Plates and Shells, in Encyclopedia of Aerospace Engineering, R. Blockley and W. Shyy
(eds), John Wiley & Sons, Chichester, UK, pp. 1683-1702, 2010.
42.
Wang, C.M., Zhang, Y.Y. and Reddy, J.N., Modeling and Analysis of Carbon Nanotube
Structures, Encyclopedia of Nanoscience and Nanotechnology, H.S. Nalwa (ed.), American
Scientific Publishers, Vol. 16, pp. 257-280, 2011.
43.
J.N. Reddy, Numerical Methods, The Finite Element, Chapter in Encyclopedia of Solid
Earth Physics, Vol. 2, Harsh K Gupta (ed.), Springer-Verlag, 2011.
44.
J.N. Reddy and V. Unnikrishnan, Developments in the Multiscale Analysis of

Multifunctional Nanocomposite Materials, Wiley Encyclopedia of Composites, 2nd Ed.,
Luigi Nicolais and Assunta Borzacchiello (eds), John Wiley &Sons, Hoboken, New
Jersey, 2012 (ISBN: 978-0-470-12828-2).
Sukanya Doshi, Amir Sohrabi, Anastasia Muliana, and JN Reddy, "Analyses of
multifunctional layered composite beams," Chapter 7 of Smart Composites: Mechanics
and Design, Rani Elhajjar, ?Valeria La Saponara, ?Anastasia Muliana (eds.), pp. 213-242,
2013, CRC Press, Boca Raton, FL (Print ISBN: 978-1-4398-9591-7).
45.
PUBLISHED REVIEWS OF BOOKS

Solid Mechanics: A Variational Approach by C. L. Dym and I. H. Shames,McGraw-Hill, New
York, 1973 for Mechanical Engineering, 1978.
26
Hamilton's Principle in Continuum Mechanics by A. Bedford, Pitman, Boston, 1985, xiv+106

pp., ISBN 0-273-08730-4, Research Notes in Mathematics, Vol. 139, for SIAM\ Review, Vol.
31(3), pp. 512-513, 1989.
Introduction to Analytical Dynamics by N.M.J. Woodhouse, Oxford Scientific Publishers,
Clarendon Press, London, 1987, for Applied Mechanics Reviews, Vol. 44, No. 10, October
1991.
Dynamics of Multibody Systems by R. E. Roberson and R. Schwertassek, Springer-Verlag,
Berlin, 1988, for Applied Mechanics Reviews (ASME), 1988.
Computational Mechanics of Probabilistic and Reliability Analysis by Wing Kam Liu and Ted
Belytschko (eds.), ELME Press International Lausanne, Switzerland, 1989, for Computer
Meth. Appl. Mech. Engineering.
Finite Elements for Solids, Fluids, and Optimization by G. A. Mohr, published by Oxford
University Press Inc., New York, 1992, Applied Mechanics Reviews.
Mechanics of Composite Structures by V. V. Vasiliev, published by Taylor & Francis,
Washington, D. C. 1993, AIAA Journal.
Finite Element Procedures by K.-J. Bathe, published by Prentice Hall, Englewood Cliffs,
New Jersey, 1996, Applied Mechanics Reviews.
Stress Analysis of Fiber Reinforced Composite Materials by M. W. Hyer, published by
WCB/McGraw-Hill, Boston, 1998, 627 pp. ISBN 0-07-016700-1, AIAA Journal.
Vibration of Mindlin Plates: Programming the p-Version Ritz Method by K.-M. Liew, et al.,
published by Elsevier, Oxford, U.K., 1998, 202 pp. ISBN 0-08-043341-3 Applied Mechanics
Reviews, Vol. 52, No. 9, B93, September 1999.
Least-Squares Finite Element Method: Theory and Applications in Computational Fluid Dynamics
and Electromagnetics by Bo-nan Jiang, published by Springer-Verlag, Berlin, U.K., 1998, 418
pp. ISBN 3-540-63934-9 Applied Mechanics Reviews, Vol. 53, No. 1, B1, January 2000.
JOURNAL PAPERS
1.
J. T. Oden and J.N. Reddy, Mixed Conjugate Finite Element Approximations of Linear
Operators," Journal of Structural Mechanics, Vol. 1, No. 1, pp. 113-131, 1972.
2.
J. T. Oden and J.N. Reddy, Note on an Approximate Method for Computing Consistent
Conjugate Stresses in Elastic Finite Elements," International Journal for Numerical Methods
in Engineering, Vol. 6, No. 1, pp. 55-61, 1973.
3.
J. T. Oden and J.N. Reddy, Convergence of Mixed Finite Element Approximations of a

Class of Linear Boundary Value Problems," Journal of Structural Mechanics, Vol. 2, No. 2,
pp. 83-108, 1973.
4.
J. T. Oden and J.N. Reddy, On Dual-Complementary Variational Principles in

Mathematical Physics," International Journal of Engineering Science, Vol. 12, No. 1, pp. 129, 1974.
5.
J. T. Oden and J.N. Reddy, Mixed Finite-Element Approximations of Linear Boundary

Value Problems," Quarterly of Applied Mathematics, Vol. 33, No. 3, pp. 255-280, 1975.
6.
J.N. Reddy, A Note on Mixed Variational Principles for Initial Value Problems,
Quarterly Journal of Mechanics and Applied Mathematics, Vol. 28, Part 1, pp. 123-132,
February 1975.
27
7.
J. T. Oden and J.N. Reddy, Some Observations on Properties of Certain Mixed Finite
Element Approximations," International Journal for Numerical Methods in Engineering, Vol.
9, No. 4, pp. 933-938, 1975.
8.
J. T. Oden and J.N. Reddy, On Mixed Finite Element Approximations," SIAM Journal of
Numerical Analysis, Vol. 13, No. 3, pp. 393-404, 1976.
9.
J.N. Reddy, Modified Gurtin's Variational Principles in the Linear Dynamic Theory of
Viscoelasticity, International Journal of Solids and Structures, Vol. 12, pp. 227-235, 1976.
10.
J.N. Reddy, Variational Principles for Linear Coupled Dynamic Theory of

Thermoviscoelasticity, International Journal of Engineering Science, Vol. 14, pp. 605-616,
1976.
11.
J.N. Reddy, Finite Element Analysis of the Initial Stages of Hypervelocity Impact,
Computer Methods in Applied Mechanics and Engineering, Vol. 9, pp. 47-63, 1976.
12.
J.N. Reddy, On Complementary Variational Principles for the Linear Theory of Plates,
Journal of Structural Mechanics, Vol. 4, pp. 417-436, 1976.
13.
J.N. Reddy, Existence and Uniqueness of Solutions to a Stationary Finite Element

Model of the Biharmonic Equation, Computers and Mathematics with Applications, Vol. 3,
pp. 135-147, 1977.
14.
J.N. Reddy and C. S. Tsay, Stability and Vibration of Thin Rectangular Plates by
Simplified Mixed Finite Elements," Journal of Sound and Vibration, Vol. 55, No. 2, pp. 289302, 1977.
15.
J.N. Reddy and V. D. Murty, Finite Element Solution of Integral Equations Arising in
Radiative Heat Transfer and Laminar Boundary-Layer Theory, Numerical Heat Transfer,
Vol. 1, pp. 389-401, 1978.
16.
C. S. Tsay and J.N. Reddy, Bending, Stability and Free Vibration of Thin Orthotropic
Plates by Simplified Mixed Finite Elements, Journal of Sound and Vibration, Vol. 59, No.
2, pp. 307-311, 1978.
17.
J.N. Reddy, On the Accuracy and Existence of Solutions to Primitive Variable Models of
Viscous Incompressible Fluids, International Journal of Engineering Science, Vol. 16,
No.12, pp. 921-929, 1978.
18.
J.N. Reddy and R. Gera, An Accurate Finite Difference Analysis of Bending of Thin
Rectangular Elastic Plates, Computers & Structures, Vol. 10, pp. 431-438, 1979.
19.
J.N. Reddy, Finite Element Modeling of Structural Vibrations: A Review of Recent

Advances, The Shock and Vibration Digest, Vol. 11, No. 1, pp. 25-39, January 1979.
20.
J.N. Reddy, Free Vibration of Antisymmetric, Angle-Ply Laminated Plates Including

Transverse Shear Deformation by the Finite Element Method, Journal of Sound and
Vibration, Vol. 66, No. 4, pp. 565-576, 1979.
21.
A. K. Satake and J.N. Reddy, A Numerical Method for Elastic-Plastic Torsion by

Variational Inequality, International Journal of Solids and Structures, Vol. 16, No. 1, pp. 118, 1980.
22.
R. G. Belie and J.N. Reddy, Direct Prediction of Fracture for Two-Dimensional Plane
Stress Structures, Computers & Structures, Vol. 11, pp. 49-53, 1980.
28
23.
Y. K. Sasake and J.N. Reddy, A Comparison of Stability and Accuracy of Some

Numerical Models of Two-Dimensional Circulation, International Journal for Numerical
Methods in Engineering, Vol. 16, pp. 149-170, 1980.
24.
J.N. Reddy, A Penalty Plate-Bending Element for the Analysis of Laminated

Anisotropic Composite Plates, International Journal for Numerical Methods in Engineering,
Vol. 15, No. 8, pp. 1187-1206, 1980.
25.
J.N. Reddy and W. C. Chao, Finite-Element Analysis of Laminated Bimodulus

Composite-Material Plates, Computers & Structures, Vol. 12, pp. 245-251, 1980.
26.
J.N. Reddy and A. Satake, A Comparison of a Penalty Finite Element Model with the
Stream Function-Vorticity Model of Natural Convection in Enclosures, Journal of Heat
Transfer, Vol. 102, pp. 659-666, 1980.
27.
J.N. Reddy and Y. S. Hsu, Effects of Shear Deformation and Anisotropy on the Thermal
Bending of Layered Composite Plates, Journal of Thermal Stresses, Vol. 3, pp. 475-493,
1980.
28.
J.N. Reddy, C. W. Bert, Y. S. Hsu, and V. S. Reddy, Thermal Bending of Thick

Rectangular Plates of Bimodulus Material, Journal of Mechanical Engineering Science
(Institution of Mechanical Engineers, London), Vol. 22, No. 6, pp. 297-304, 1980.
29.
J.N. Reddy and I. R. Singh, Large Deflections and Large-Amplitude Free Vibrations of
Straight and Curved Beams, International Journal for Numerical Methods in Engineering,
Vol. 17, pp. 829-852, 1981.
30.
J.N. Reddy and W. C. Chao, A Comparison of Closed-Form and Finite Element

Solutions of Thick, Laminated, Anisotropic Rectangular Plates, Nuclear Engineering and
Design, Vol. 64, pp. 153-167, 1981.
31.
J.N. Reddy, C. L. Huang and I. R. Singh, Large Deflection and Large Amplitude
Vibrations of Axisymmetric Circular Plates, International Journal for Numerical Methods
in Engineering, Vol. 17, pp. 527-541, 1981.
32.
J.N. Reddy and C. L. Huang, Nonlinear Axisymmetric Bending of Annular Plates with
Varying Thickness, International Journal of Solids and Structures, Vol. 17, pp. 811-825,
1981.
33.
C. W. Bert, J.N. Reddy, C. W. Chao, and V. S. Reddy, Vibration of Thick Rectangular

Plates of Bimodulus Composite Material, Journal of Applied Mechanics, Vol. 48, pp. 371376, 1981.
34.
J.N. Reddy and W. C. Chao, Large-Deflection and Large-Amplitude Free Vibrations of

Laminated Composite-Material Plates, Computers & Structures, Vol. 13, pp. 341-347,
1981.
35.
C. W. Bert, J.N. Reddy, V. Sudhakar Reddy, and W. C. Chao, Bending of Thick

Rectangular Plates Laminated of Bimodulus Composite Material, AIAA Journal, Vol. 19,
No. 10, pp. 1342-1349, 1981.
36.
Y. S. Hsu, J.N. Reddy, and C. W. Bert, Thermoelasticity of Circular Cylindrical Shells

Laminated of Bimodulus Composite Materials, Journal of Thermal Stresses, Vol. 4, pp.
155-177, 1981.
37.
J.N. Reddy and W. C. Chao, Nonlinear Bending of Thick, Rectangular, Laminated

Composite Plates, International Journal of Non-Linear Mechanics, Vol. 16, No. 3/4, pp.
291-301, 1981.
29
38.
J.N. Reddy and C. L. Huang, Large Amplitude Free Vibrations of Annular Plates of
Varying Thickness, Journal of Sound and Vibration, Vol. 79, No. 3, pp. 387-396, 1981.
39.
J.N. Reddy, Finite-Element Modeling of Composite Plates and Shells: A Review of

Recent Advances, The Shock and Vibration Digest, Vol. 13, No. 12, pp. 3-14, 1981.
40.
J.N. Reddy, R. J. Stein and J. S. Wickham, Finite-Element Modeling of Folding and

Faulting, International Journal for Numerical and Analytical Methods in Geomechanics, Vol.
6, pp. 425-440, 1982.
41.
J. S. Wickham, G. S. Tapp, and J.N. Reddy, Finite-Element Modeling of Fracture

Density in Single Layer Folds, International Journal for Numerical and Analytical Methods
in Geomechanics, Vol. 6, pp. 441-459, 1982.
42.
J.N. Reddy, On Penalty Function Methods in the Finite-Element Analysis of Fluid

Flow, International Journal for Numerical Methods in Fluids, Vol. 2, pp. 151-171, 1982.
43.
J.N. Reddy and W. C. Chao, Nonlinear Oscillations of Laminated, Anisotropic

Rectangular Plates, Journal of Applied Mechanics, Vol. 49, pp. 396-402, 1982.
44.
J.N. Reddy, Large Amplitude Flexural Vibration of Layered Composite Plates with
Cutouts, Journal of Sound and Vibration, Vol. 83, pp. 1-10, 1982.
45.
J.N. Reddy, On the Solutions to Forced Motions of Rectangular Composite Plates,

Journal of Applied Mechanics, Vol. 49, pp. 403-408, 1982.
46.
J.N. Reddy and C. W. Bert, On the Behavior of Plates Laminated of Bimodulus

Composite Materials, ZAMM, Vol. 62, pp. 213-219, 1982.
47.
J.N. Reddy, Penalty-Finite-Element Analysis of 3-D Navier-Stokes Equations,

Computer Methods in Applied Mechanics and Engineering, Vol. 35, pp. 87-106, 1982.
48.
J.N. Reddy, Transient Response of Laminated, Bimodular-Material, Composite

Rectangular Plates, Journal of Composite Materials, Vol. 16, pp. 139-152, 1982.
49.
J.N. Reddy, Bending of Laminated Anisotropic Shells by a Shear Deformable Finite

Element, Fibre Science and Technology, Vol. 17, No. 1, pp. 9-24, 1982.
50.
J.N. Reddy, Dynamic (Transient) Analysis of Layered Anisotropic Composite-Material

Plates, International Journal for Numerical Methods in Engineering, Vol. 19, pp. 237-255,
1983.
51.
J.N. Reddy and W. C. Chao, Nonlinear Bending of Bimodular-Material Plates,

International Journal of Solids and Structures, Vol. 19, No. 3, pp. 229-237, 1983.
52.
J.N. Reddy, Geometrically Nonlinear Transient Analysis of Laminated Composite

Plates, AIAA Journal, Vol. 21, No. 4, pp. 621-629, 1983.
53.
T. Kuppusamy and J.N. Reddy, A Three-Dimensional Nonlinear Analysis of Cross-ply

Rectangular Composite Plates, Computers & 7 Structures, Vol. 18, No. 2, pp. 263-272,
1984.
54.
T. Kuppusamy, A. Nanda, and J.N. Reddy, Materially Nonlinear Analysis of

Laminated Composite Plates, Composite Structures, Vol. 2, pp. 315-328, l984.
55.
J.N. Reddy, A Note on Symmetry Considerations in the Transient Response of

Unsymmetrically Laminated Anisotropic Plates, International Journal for Numerical
Methods in Engineering, Vol. 20, pp. l75-l94, l984.
30
56.
N. S. Putcha and J.N. Reddy, A Mixed Shear Flexible Finite Element for the Analysis of
Laminated Plates, Computer Methods in Applied Mechanics and Engineering, Vol. 44, pp.
213-227, 1984.
57.
J.N. Reddy, Exact Solutions of Moderately Thick Laminated Shells, Journal of

Engineering Mechanics, ASCE, Vol. ll0, No. 5, pp. 794-809, 1984.
58.
J.N. Reddy, A Simple Higher-Order Theory for Laminated Plates, Journal of Applied
Mechanics, Vol. 5l, pp. 745-752, l984.
59.
J.N. Reddy, A Refined Nonlinear Theory of Plates with Transverse Shear Deformation,
Int. J. Solids and Structures, Vol. 20, No. 9/l0, pp. 88l-896, l984.
60.
J.N. Reddy and W. C. Chao, Analysis of Laminated Composite Shells Using a

Degenerated 3-D Element, International Journal for Numerical Methods in Engineering,
Vol. 20, pp. l99l-2007, l984.
61.
J.N. Reddy and T. Kuppusamy, Natural Vibrations of Laminated Anisotropic Plates

Using 3D-Elasticity Theory, Journal of Sound and Vibration, Vol. 94, No. l, pp. 63-69, l984.
62.
J.N. Reddy and K. Chandrashekhara, Nonlinear Analysis of Laminated Shells

Including Transverse Shear Strains, AIAA Journal, Vol. 23, No. 3, pp. 440-44l, l985.
63.
J.N. Reddy and C. F. Liu, A Higher-Order Shear Deformation Theory of Laminated

Elastic Shells, International Journal of Engineering Science, Vol. 23, No. 3, pp. 319-330,
1985.
64.
J.N. Reddy and N. D. Phan, Stability and Vibration of Isotropic, Orthotropic, and
Laminated Plates According to a Higher-Order Shear Deformation Theory, Journal of
Sound and Vibration, Vol. 98, No. 2, pp. 157-170, 1985.
65.
J.N. Reddy and K. Chandrashekhara, Geometrically Nonlinear Transient Analysis of

Laminated, Doubly Curved Shells, International Journal of Non-Linear Mechanics, Vol. 20,
No. 2, pp. 79-90, 1985.
66.
J.N. Reddy, A Review of the Literature on Finite-Element Modeling of Laminated

Composite Plates, The Shock and Vibration Digest, Vol. 17, No. 4, pp. 3-8, 1985.
67.
P. R. Heyliger and J.N. Reddy, Reduction of Free Edge Stress Concentration in

Symmetric Composite Laminates, Journal of Applied Mechanics, Vol. 52, pp. 801-805,
December 1985.
68.
N. D. Phan and J.N. Reddy, Analysis of Laminated Composite Plates Using a HigherOrder Shear Deformation Theory,International Journal for Numerical Methods in
Engineering, Vol. 21, pp. 2201-2219, 1985.
69.
J.N. Reddy, On the Numerical Solution of Differential Equations by the Finite Element
Method, Part I: An Introduction to the Finite Element Method (The Ritz Models),
Indian Journal of Pure and Applied Mathematics, Vol. 16, No. 11, pp. 1341-1376, November
1985.
70.
J.N. Reddy, On the Numerical Solution of Differential Equations by the Finite Element
Method, Part II: Alternative Finite Element Formulations, Indian Journal of Pure and
Applied Mathematics, Vol. 16, No. 12, pp. 1512-1528, December 1985.
71.
N. S. Putcha and J.N. Reddy, A Refined Mixed Shear Flexible Finite Element for the
Nonlinear Analysis of Laminated Plates, Computers & Structures, Vol. 22, No. 4, pp. 529538, 1986.
31
72.
N. S. Putcha and J.N. Reddy, Stability and Natural Vibration Analysis of Laminated
Plates by Using a Mixed Element Based on a Refined Plate Theory, Journal of Sound and
Vibration, Vol. 104, No. 2, pp. 285-300, 1986.
73.
M. Dhaubhadel, D. Telionis, and J.N. Reddy, Penalty Finite-Element Analysis of

Coupled Fluid Flow and Heat Transfer for In-Line Bundle of Cylinders in Cross Flow,
International Journal of Non-Linear Mechanics, Vol. 21, No. 5, pp. 361-373, 1986.
74.
J.N. Reddy and D. Sandidge, Mixed Finite Element Models for Laminated Composite
Plates, Journal of Engineering for Industry, ASME, Vol. 109, pp. 39-45, 1987.
75.
J.N. Reddy, A Generalization of the Two-Dimensional Theories of Laminated

Composite Plates, Communication in Applied Numerical Methods, Vol. 3, pp. 173-180,
1987.
76.
P. R. Heyliger and J.N. Reddy, A Mixed Computational Algorithm for Plane Elastic
Contact Problems-I. FormulationI. Formulation, Computers & Structures, Vol. 26, No.
4, pp. 621-634, 1987.
77.
P. R. Heyliger and J.N. Reddy, A Mixed Computational Algorithm for Plane Elastic
Contact Problems-I. FormulationII. Numerical Examples, Computers & Structures,
Vol. 26, No. 4, pp. 635-653, 1987.
78.
J.N. Reddy and A. K. Pandey, A First-Ply Failure Analysis of Composite Laminates,

Computers & Structures, Vol. 25, No. 3, pp. 371-393, 1987.
79.
J.N. Reddy, A Small Strain and Moderate Rotation Theory of Laminated Anisotropic
Plates, Journal of Applied Mechanics, Vol. 54, pp. 623-626, 1987.
80.
J.N. Reddy, A. A. Khdeir, and L. Librescu, Lvy Type Solutions for Symmetrically
Laminated Rectangular Plates Using First-Order Shear Deformation Theory, Journal of
Applied Mechanics, Vol. 54, No. 3, pp. 740-742, 1987.
81.
M. D. Dhaubhadel, D. P. Telionis, and J.N. Reddy, Finite Element Analysis of Fluid

Flow and Heat Transfer for Staggered Bundle of Cylinders in Cross Flow, Int. J.
Numerical Methods in Fluids, Vol. 7, pp. 1325-1342, 1987.
82.
A. A. Khdeir, J.N. Reddy, and L. Librescu Analytical Solution of a Refined Shear

Deformation Theory for Rectangular Composite Plates, International Journal of Solids and
Structures, Vol. 23, No. 10, pp. 1447-1463, 1987.
83.
L. Librescu, A. A. Khdeir, and J.N. Reddy, A Comprehensive Analysis of the State of

Stress of Elastic Anisotropic Flat Plates Using Refined Theories, Acta Mechanica, Vol. 70,
pp. 57-81, 1987.
84.
P. R. Heyliger and J.N. Reddy, A Mixed Updated Lagrangian Formulation for Plane
Elastic Bodies, Journal of Composites Technology & Research, Vol. 9, No. 4, pp. 131-140,
1987.
85.
J.N. Reddy and V. A. Padhye, Penalty Finite Element Model for Axisymmetric Flows of
Non-Newtonian Fluids, Numerical Methods for Partial Differential Equations, Vol. 4, pp.
33-56, 1988.
86.
P. R. Heyliger and J.N. Reddy, On a Mixed Finite Element Model for Large
Deformation Analysis of Elastic Solids, International Journal of Non-Linear Mechanics,
Vol. 23, No. 2, pp. 131-145, 1988.
87.
S. Roy and J.N. Reddy, Non-Linear Analysis of Adhesively Bonded Joints,

International Journal of Non-Linear Mechanics, Vol. 23, No. 2, pp. 97-112, 1988.
32
88.
C. L. Liao, S. P. Engelstad, and J.N. Reddy, A Solid-Shell Transition Element for

Geometrically Nonlinear Analysis of Laminated Composite Structures,International
Journal for Numerical Methods in Engineering, Vol. 26, pp. 1843-1854, 1988.
89.
S. Roy and J.N. Reddy, Nonlinear Viscoelastic Analysis of Adhesively Bonded Joints,
Tire Science and Technology, Vol. 16, No. 3, pp. 146-170, 1988.
90.
S. Roy and J.N. Reddy, A Finite Element Analysis of Adhesively Bonded Composite
Joints with Moisture Diffusion and Delayed Failure,Computers & Structures, Vol. 29, No.
6, pp. 1011-1033, 1988.
91.
R. Schmidt and J.N. Reddy, A Refined Small Strain and Moderate Rotation Theory of
Elastic Anisotropic Shells, Journal of Applied Mechanics, Vol. 55, pp. 611-617, 1988.
92.
J.N. Reddy, A Primer on the Finite Element Method, The Engineering Science
Perspective, Vol. 6, pp. 21-31, 1987/1988.
93.
P. R. Heyliger and J.N. Reddy, A Higher-Order Beam Finite Element for Bending and
Vibration Problems, Journal of Sound and Vibration, Vol. 126, No. 2, pp. 309-326, 1988.
94.
S. Roy and J.N. Reddy, Finite Element Models of Viscoelasticity and Diffusion in
Adhesively Bonded Joints, International Journal for Numerical Methods in Engineering,
Vol. 26, pp. 2531-2546, 1988.
95.
A. A. Khdeir and J.N. Reddy, Dynamic Response of Antisymmetric Angle-Ply

Laminated Plates Subjected to Arbitrary Loading, Journal of Sound and Vibration, Vol.
126, No. 3, pp. 437-445, 1988.
96.
E. Yogeswaren and J.N. Reddy, A Study of Contact Stresses in Pin-Loaded Orthotropic

Plates, Computers & Structures, Vol. 30, No. 5, pp. 1067-1077, 1988.
97.
S. Roy, J.N. Reddy, D. R. Lefebvre, and D. A. Dillard A Model for the Diffusion of
Moisture in Adhesive Joints, Part III: Numerical Simulations, Journal of Adhesion Science,
Vol. 27, pp. 41-62, 1989.
98.
C. L. Liao and J.N. Reddy, A Continuum-Based Stiffened Composite Shell Element for
Geometrically Nonlinear Analysis, AIAA Journal, Vol. 27, No. 1, pp. 95-101, 1989.
99.
A. A. Khdeir and J.N. Reddy, Exact solutions for the Transient Response of Symmetric
Cross-Ply Laminates Using a Higher-Order Plate Theory, Composites Science and
Technology, Vol. 34, pp. 205-224, 1989.
100.
L. Librescu and J.N. Reddy, A Few Remarks Concerning Several Refined Theories of
Anisotropic Composite Laminated Plates, International Journal of Engineering Science,
Vol. 27, No. 5, pp. 515-527, 1989.
101.
A. A. Khdeir and J.N. Reddy, On the Forced Motions of Antisymmetric Cross-Ply

Laminated Plates, International Journal of Mechanical Sciences, Vol. 31, No. 7, pp. 499-510,
1989.
102.
J.N. Reddy and A. A. Khdeir, Buckling and Vibration of Laminated Composite Plates
Using Various Plate Theories, AIAA J., Vol. 27, No. 12, pp. 1808-1817, 1989.
103.
E. J. Barbero, J. L. Teply, and J.N. Reddy, A Plate Bending Element Based on a

Generalized Laminate Plate Theory, International Journal for Numerical Methods in
33
104.
M. Iga and J.N. Reddy, Penalty Finite Element Analysis of Free Surface Flows of PowerLaw Fluids, International Journal of Non-Linear Mechanics, Vol. 24, No. 5, pp. 383-399,
1989.
105.
A. A. Khdeir, J.N. Reddy, and D. Frederick, A Study of Bending, Vibration and

Buckling of Cross-Ply Circular Cylindrical Shells with Various Shell Theories,
International Journal of Engineering Science, Vol. 27, No. 11, pp. 1337-1351, 1989.
106.
J.N. Reddy, On Refined Computational Models of Composite Laminates, International

Journal for Numerical Methods in Engineering, Vol. 27, pp. 361-382, 1989.
107.
J.N. Reddy and A. A. Khdeir, Dynamic Response of Cross-Ply Laminated Shallow

Shells According to a Refined Shear Deformation Theory, Journal of the Acoustical Society
of America, Vol. 85, No. 6, pp. 2423-2431, 1989.
108.
J.N. Reddy, On the Generalization of Displacement-Based Laminate Theories, Applied

Mechanics Reviews, Vol. 42, No. 11, pp. S213-S222, 1989.
109.
M. P. Singh, A. A. Khdeir, G. O. Maldonado, and J.N. Reddy, Random Response of

Antisymmetric Angle-Ply Laminated Plates, Structural Safety, Vol. 6, pp. 115-127, 1989.
110.
E. J. Barbero, J. L. Teply, and J.N. Reddy, An Accurate Determination of Stresses in

Thick Laminates Using a Generalized Plate Theory, International Journal for Numerical
111.
E. J. Barbero, J.N. Reddy, and J. L. Teply, General Two-Dimensional Theory of

Laminated Cylindrical Shells, AIAA Journal, Vol. 28, No. 3, pp. 544-552, March 1990.
112.
A. D. Gotsis, D. G. Baird, and J.N. Reddy, Comparison of Experimental Data with the
Numerical Simulation of Planar Entry Flow: Role of the Constitutive Equation,
International Journal for Numerical Methods in Fluids, Vol. 10, pp. 373-400, 1990.
113.
L. Librescu, A. A. Khdeir, and J.N. Reddy, Further Results Concerning the Dynamic
Response of Shear Deformable Elastic Orthotropic Plates, ZAMM, Vol. 70, No. 1, pp.
23-33, 1990.
114.
L. Liao and J.N. Reddy, Analysis of Anisotropic, Stiffened Composite Laminates Using
a Continuum-Based Shell Element, Computers & Structures, Vol. 34, No. 6, pp. 805-815,
1990.
115.
A. A. Khdeir and J.N. Reddy, Influence of Edge Conditions on Modal Characteristics of

Cross-Ply Laminated Shells, Computers & Structures, Vol. 34, No. 6, pp. 817-826, 1990.
116.
J.N. Reddy, A Review of Refined Theories of Laminated Composite Plates, Shock and
Vibration Digest, Vol. 22, No. 7, pp. 3-17, July 1990.
117.
R. C. Averill and J.N. Reddy, On the Behavior of Plate Elements Based on the FirstOrder Shear Deformation Theory, Engineering Computations, Vol. 7, No. 1, pp. 57-74,
1990.
118.
E. J. Barbero and J.N. Reddy, The Jacobian Derivative Method for Three-Dimensional
Fracture Mechanics, Communications in Applied Numerical Methods, Vol. 6, No. 7, pp.
506-518, 1990.
119.
J. Moorthy, J.N. Reddy, and R. H. Plaut, Parametric Instability of Laminated Composite

Plates with Transverse Shear Deformation, International Journal of Solids and Structures,
Vol. 26, No. 7, pp. 801-811, 1990.
34
120.
J.N. Reddy, A General Non-Linear Third-Order Theory of Plates with Moderate

Thickness, International Journal of Non-Linear Mechanics, Vol. 25, No. 6, pp. 677-686, 1990.
121.
R. Bhumbla, J. B. Kosmatka, and J.N. Reddy, Free Vibration Behavior of Spinning Shear
Deformable Plates Composed of Composite Materials, AIAA Journal, Vol. 28, No. 11,
pp. 1962-1970, 1990.
122.
A. F. Palmerio, J.N. Reddy, and R. Schmidt, On a Moderate Rotation Theory of

Laminated Anisotropic ShellsPart 1. Theory, International Journal of Non-Linear
Mechanics, Vol. 25, No. 6, pp. 687-700. 1990.
123.
A. F. Palmerio, J.N. Reddy, and R. Schmidt, On a Moderate Rotation Theory of

Laminated Anisotropic ShellsPart 2. Finite-Element Analysis, International Journal of
Non-Linear Mechanics, Vol. 25, No. 6, pp. 701-714, 1990.
124.
E. J. Barbero and J.N. Redddy, Nonlinear Analysis of Composite Laminates Using a

Generalized Laminated Plate Theory, AIAA Journal, Vol. 28, No. 11, pp. 1987-1994, 1990.
125.
J. L. Teply, E. J. Barbero, and J.N. Reddy, Bending, Vibration and Stability of ARALL
Laminates Using a Generalized Laminate Plate Theory, International Journal of Solids and
126.
A. A. Khdeir, J.N. Reddy, and D. Frederick, On the Transient Response of Cross-Ply

Laminated Circular Cylindrical Shells, International Journal of Impact Engineering, Vol. 9,
No. 4, pp. 475-484, 1990.
127.
J.N. Reddy, On Refined Theories of Composite Laminates, Meccanica, Vol. 25, No. 4,
pp. 230-238, 1990.
128.
A. Nosier and J.N. Reddy, A Study of Non-Linear Dynamic Equations of Higher-Order

Shear Deformation Plate Theories, International Journal of Non-Linear Mechanics, Vol. 26,
No. 2, pp. 233-249, 1991.
129.
R. T. Arenburg and J.N. Reddy, Analysis of Metal-Matrix Composite Structures-I.

Micromechanics Constitutive Theory, Computers & Structures, Vol. 40, No. 6, pp. 13571368, 1991.
130.
R. T. Arenburg and J.N. Reddy, Analysis of Metal-Matrix Composite Structures-II.

Laminate Analysis, Computers & Structures, Vol. 40, No. 6, pp. 1369-1385, 1991.
131.
D. H. Robbins and J.N. Reddy, Analysis of Piezoelectrically Actuated Beams Using a

Layer-Wise Displacement Theory, Computers & Structures, Vol. 41, No. 2, pp. 265-279,
1991.
132.
J.N. Reddy and R. C. Averill, Advances in the Modeling of Laminated Plates,

Computing Systems in Engineering, Vol. 2, No. 5/6, pp. 541-555, 1991.
133.
E. Sacco and J.N. Reddy, Analysis of Thick Bimodular Composite Plates Using an
Energy-Based Constitutive Model, Computers & Structures, Vol. 39, No. 1/2, pp. 149154, 1991.
134.
P. Wung and J.N. Reddy, A Transverse Deformation Theory of Laminated Composite

Plates, Computers & Structures, Vol. 41, pp. 821-833, 1991.
135.
A. A. Khdeir and J.N. Reddy, Analytical Solutions of Refined Plate Theories of CrossPly Composite Laminates, Journal of Pressure Vessel Technology, ASME, Vol. 113, No. 4,
pp. 570-578, 1991.
35
136.
A. A. Khdeir and J.N. Reddy, Thermal Stresses and Deflections of Cross-Ply Laminated
Plates using Refined Plate Theories, Journal of Thermal Stresses, Vol. 14, No. 4, pp. 419438, 1991.
137.
E. J. Barbero and J.N. Reddy, Modeling of Delamination in Composite Laminates Using

a Layer-Wise Plate Theory, International Journal of Solids and Structures, Vol. 28, No. 3,
pp. 373-388, 1991.
138.
E. Sacco and J.N. Reddy, A Constitutive Model for Bimodular Materials with an
Application to Plate Bending, Journal of Applied Mechanics, Vol. 59, pp. 220-221, 1992.
139.
E. Sacco and J.N. Reddy, On First- and Second-Order Moderate Rotation Theories of
Laminated Plates, International Journal for Numerical Methods in Engineering, Vol. 33, No.
1, pp. 1-17, 1992.
140.
A. A. Khdeir, M. D. Ragab, and J.N. Reddy, Thermal Effects on the Response of CrossPly Laminated Shallow Shells, International Journal of Solids and Structures, Vol. 29, No.
5, pp. 653-667, 1992.
141.
Q. Gu and J.N. Reddy, Non-Linear Analysis of Free-Edge Effects in Composite

Laminates Subjected to Axial Loads, International Journal of Non-Linear Mechanics, Vol.
27, No. 1, pp. 27-41, 1992.
142.
M. P. Reddy and J.N. Reddy, Finite-Element Analysis of Flows of Non-Newtonian

Fluids in Three-Dimensional Enclosures, International Journal of Non-Linear Mechanics,
Vol. 27, No. 1, pp. 9-26, 1992.
143.
R. C. Averill and J.N. Reddy, An Assessment of Four-Noded Plate Finite Elements

Based on a Generalized Third-Order Theory, International Journal for Numerical Methods
in Engineering, Vol. 33, pp. 1553-1572, 1992.
144.
M. P. Reddy and J.N. Reddy, Numerical Simulation of Forming Processes Using a

Coupled Fluid Flow and Heat Transfer Model, International Journal for Numerical
145.
M. Savoia and J.N. Reddy, A Variational Approach to Three-Dimensional Elasticity

Solutions of Laminated Composite Plates, Journal of Applied Mechanics, Vol. 59, No. 2,
Part 2, pp. S166-S175, 1992.
146.
A. Nosier and J.N. Reddy, Vibration and Stability Analyses of Cross-Ply Laminated
Circular Cylindrical Shells, Journal of Sound and Vibration, Vol. 157, No. 1, pp. 139-159,
1992.
147.
Y. S. N. Reddy and J.N. Reddy, Linear and Non-Linear Failure Analysis of Composite
Laminates with Transverse Shear, Composites Science and Technology, Vol. 44, pp. 227255, 1992.
148.
S. P. Engelstad, J.N. Reddy, and N. F. Knight, Jr., Postbuckling Response and Failure
Prediction of Graphite-Epoxy Plates Loaded in Compression, AIAA Journal, Vol. 30, No.
8, pp. 2106-2113, 1992.
149.
J.N. Reddy and M. Savoia, The Layer-Wise Shell Theory for Postbuckling of Laminated
Circular Cylindrical Shells, AIAA Journal, Vol. 30, No. 8, pp. 2148-2154, 1992.
150.
M. P. Reddy, J.N. Reddy, and H. U. Akay, Penalty Finite-Element Analysis of

Incompressible Flows Using Element-by-Element Solution Algorithms, Computer
Methods in Applied Mechanics and Engineering, Vol. 100, pp. 69-205, 1992.
36
151.
A. Nosier and J.N. Reddy, On Boundary Layer and Interior Equations for Higher-Order
Theories of Plates, ZAMM, Vol. 72, No. 12, pp. 657-666, 1992.
152.
D. H. Robbins, Jr. and J.N. Reddy, Analysis of Composite Laminates Using Variable
Kinematic Finite Elements, RBCM-Journal of the Brazilian Society of Mechanical Sciences,
Vol. 14, No. 4, pp. 299-326, 1992.
153.
A. Nosier and J.N. Reddy, On Vibration and Buckling of Symmetric Laminated Plates
According to Shear Deformation Theories. Parts I and II, Acta Mechanica, Vol. 94, Nos.
3-4, pp. 123-170, 1992.
154.
D. H. Robbins, Jr. and J.N. Reddy, Modeling of Thick Composites Using a Layer-Wise
Laminate Theory, International Journal for Numerical Methods in Engineering, Vol. 36, pp.
655-677, 1993.
155.
S. P. Engelstad and J.N. Reddy, Probabilistic Nonlinear Finite Element Analysis of

Composite Structures, AIAA Journal, Vol. 31, No. 2, pp. 362-369, 1993.
156.
R C. Averill, G. P. Carman, J.N. Reddy, and K. L. Reifsnider, Optimization of Fiber

Coatings to Minimize Stress Concentrations in Composite Materials, Journal of
Composite Materials, Vol. 27, No. 6, pp. 589-612, 1993.
157.
D. H. Robbins, Jr. and J.N. Reddy, The Effects of Kinematic Assumptions on Computed
Strain Energy Release Rates for Delaminated Composite Plates, Mathematical Modeling
and Scientific Computing, Vol. 1, Nos. 1-2, pp. 50-66, 1993.
158.
Y. S. N. Reddy and J.N. Reddy, Three-Dimensional Finite Element Progressive Failure

Analysis of Composite Laminates Under Axial Extension, ASTM Journal of Composites
Technology and Research, Vol. 15, No. 2, pp. 73-87, 1993.
159.
J.N. Reddy, Finite Element Analysis of Viscous Incompressible Flows Using Primitive
Variables, Computers & Structures, Vol. 47, Nos. 4/5, pp. 857-870, 1993.
160.
G. S. Reddy, W. J. Mascarenhas, and J.N. Reddy, Numerical Simulation of Solidification

of Molten Aluminum Alloys in Cylindrical Molds, Metallurgical Transactions, Vol. 24B,
pp. 677-684, 1993.
161.
A. Nosier, R. K. Kapania, and J.N. Reddy, Free Vibration Analysis of Laminated Plates
Using a Layerwise Theory, AIAA J., Vol. 31, No. 12, pp. 2335-2346, 1993.
162.
F. Fraternali and J.N. Reddy, A Penalty Model for the Analysis of Laminated
Composite Shells, International Journal of Solids and Structures, Vol. 30, No. 24, pp. 33373355, 1993.
163.
M. P. Reddy, L. G. Reifschneider, J.N. Reddy, and H. U. Akay, Accuracy and

Convergence of Element-by-Element Iterative Solvers for Incompressible Fluid Flows
Using Penalty Finite Element Model, International Journal of Numerical Methods in Fluids,
Vol. 17, pp. 1019-1033, 1993.
164.
B. V. K. Satya Sai, K. N. Seetharamu, Ashwatha Narayana, and J.N. Reddy, Finite

Element Analysis of the Effect of Radius Ratio on Natural Convection in an Annular
Cavity, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 3, No.4, pp.
305-318, 1993.
165.
J.N. Reddy and J. H. Starnes, Jr., General Buckling of Stiffened Circular Cylindrical
Shells According to a Layerwise Theory, Computers & Structures, Vol. 49, No. 4, pp. 605616, 1993.
37
166.
D. H. Robbins, Jr. and J.N. Reddy, A Simultaneous Multiple Model Approach for the
Analysis of Composite Laminates, Journal of the Aeronautical Society of India, Vol. 45, pp.
157-177, 1993.
167.
A. V. Krishna Murty and J.N. Reddy, Residual Compressive Strength of Laminates

Containing Delaminations, Journal of the Aeronautical Society of India, Vol. 45, pp. 246252, 1993.
168.
J.N. Reddy, An Evaluation of Equivalent-Single-Layer and Layerwise Theories of

Composite Laminates, Composite Structures, Vol. 25, pp. 21-35, 1993.
169.
A. Nosier, R. K. Kapania, and J.N. Reddy, Low-Velocity Impact of Laminated

Composites Using a Layerwise Theory, Computational Mechanics, Vol. 13, No. 5, pp. 360379, 1994.
170.
S. P. Engelstad and J.N. Reddy, Probabilistic Methods for the Analysis of Metal-Matrix
Composites, Composites Science and Technology, Vol. 50, pp. 91-107, 1994.
171.
J.N. Reddy and D. H. Robbins, Jr., Structural Theories and Computational Models for
Composite Laminates, Applied Mechanics Reviews, Vol. 47, No. 6, Part 1, pp. 147-170,
1994.
172.
F. T. Kokkinos and J.N. Reddy, Non-Linear Analysis of Plane Elastic Bodies with
Inclusions by BEM-FEM Approach, Communications in Numerical Methods in
173.
A. A. Khdeir and J.N. Reddy, Free Vibration of Cross-Ply Laminated Beams with
Arbitrary Boundary Conditions, International Journal of Engineering Science, Vol. 32, No.
12, pp. 1971-1980, 1994.
174.
J.N. Reddy, A. Nosier and R. K. Kapania, Forced Vibration and Low-Velocity Impact of
Laminated Composite Plates, Sadhana, Vol. 19, Part 3, pp. 509-541, 1994.
175.
M. Savoia and J.N. Reddy, Post-Buckling Behavior of Stiffened Cross-Ply Cylindrical

Shells, Journal of Applied Mechanics, Vol. 61, pp. 998-1000, 1994.
176.
M. Savoia and J.N. Reddy, Three-Dimensional Thermal Analysis of Laminated

Composite Plates, International Journal of Solids and Structures, Vol. 32, No. 5, pp. 593608, 1995; Authors' Closure appeared in Vol. 34, Nos. 35-36, pp. 4653-4654, 1997.
177.
J. A. Mitchell and J.N. Reddy, A Study of Embedded Piezoelectric Layers in Composite

Cylinders, Journal of Applied Mechanics, Vol. 62, pp. 166-173, 1995.
178.
C. M. Dakshina Moorthy, J.N. Reddy, and R. H. Plaut Three-Dimensional Vibrations of

Inflatable Dams, Thin-Walled Structures, Vol. 21, pp. 291-306, 1995.
179.
J. A. Mitchell and J.N. Reddy, A Refined Hybrid Plate Theory for Composite Laminates
with Piezoelectric Laminae, Journal of Solids and Structures, Vol. 32, No. 16, pp. 23452367, 1995.
180.
F. K. Kokkinos and J.N. Reddy, BEM and Penalty FEM Models for Viscous
Incompressible Fluids, Computers and Structures, Vol. 56, No. 5, pp. 849-859, 1995.
181.
F. K. Kokkinos and J.N. Reddy, A Layerwise Boundary Integral Equation Model for
Layers and Layered Media, Journal of Elasticity, Vol. 38, pp. 221-259, 1995.
182.
J.N. Reddy and J. A. Mitchell, Refined Nonlinear Theories of Laminated Composite

Structures with Piezoelectric Laminae, Sadhana (Journal of the Indian Academy of
Sciences), Vol. 20, Parts 2-4, pp. 721-747, 1995.
38
183.
Y. S. N. Reddy, C. M. D. Moorthy, and J.N. Reddy, Non-linear Progressive Failure

Analysis of Laminated Composite Plates, Journal of Non-Linear Mechanics, Vol. 30, No. 5,
pp. 629-649, 1995.
184.
D. H. Robbins, Jr. and J.N. Reddy, Variable Kinematic Modeling of Laminated

Composite Plates, Int. J. Numer. Methods in Engineering, Vol. 39, pp. 2283-2317, 1996.
185.
R. Krishna Kumar and J.N. Reddy, Stress Distributions during Fiber Pull Out, Journal
of Applied Mechanics, Vol. 63, pp. 301-306, 1996.
186.
M. P. Reddy and J.N. Reddy, Multigrid Methods to Accelerate Convergence of

Element-by-Element Solution Algorithms for Viscous Incompressible Flows,
Computational Methods in Applied Mechanical Engineering, Vol. 132, pp. 179-193, 1996.
187.
D. H. Robbins, Jr. and J.N. Reddy, An Efficient Computational Model for the Stress
Analysis of Smart Plate Structures, Smart Materials & Structures, Vol. 5, pp. 353-360,
1996.
188.
F. T. Kokkinos and J.N. Reddy, Layerwise Fundamental Solutions and ThreeDimensional Model for Layered Media" Journal of Applied Composite Materials, Vol. 3, pp.
277-300, 1996.
189.
P. Klosowski, R. Schmidt, and J.N. Reddy, Nonlinear Transient Analysis of Composite

Laminates Undergoing Moderate Rotations, Journal of Applied Mathematics and
Mechanics, Vol. 76, pp. 369-372, 1996.
190.
A. Khdeir and J.N. Reddy, Buckling of Cross-Ply Laminated Beams with Arbitrary
Boundary Conditions, Composite Structures, Vol. 37, No.1, pp. 1-3, 1997.
191.
C.M. Wang and J.N. Reddy, Buckling Load Relationship Between Reddy and Kirchhoff
Plates of Polygonal Shape with Simply Supported Edges, Mechanics Research
Communications, Vol. 24, No. 1, pp. 103-108, 1997.
192.
J.N. Reddy, C.M. Wang, and K.Y. Lam, Unified Finite Elements Based on the Classical
and Shear Deformation Theories of Beams and Axisymmetric Circular Plates, Commun.
Numerical Methods in Engineering Vol. 13, pp. 495-510, 1997.
193.
C.M. Wang, J.N. Reddy, and K.H. Lee, Relationship Between Bending Solutions of
Classical and Shear Deformation Beam Theories, International Journal of Solids &
194.
J.N. Reddy, On Locking-Free Shear Deformable Beam Finite Elements, Computer

Methods in Applied Mechanics and Engineering, Vol. 149, pp. 113-132, 1997.
195.
J.N. Reddy and C.M. Wang, Relationships Between Classical and Shear Deformation
Theories of Axisymmetric Bending of Circular Plates, AIAA Journal, Vol. 35, No. 12, pp.
1862-1868, 1997.
196.
I. Kreja and R. Schmidt, and J.N. Reddy, Finite Elements Based on a First-Order Shear
Deformation Moderate Rotation Shell Theory with Application to the Analysis of
Composite Structures, International Journal of Non-Linear Mechanics, Vol. 32, No. 6, pp.
1123-1142, 1997.
197.
A. Khdeir and J.N. Reddy, An Exact Solution for the Bending of Thin and Thick CrossPly Laminated Beams, Composite Structures, Vol. 37, pp. 195-203, 1997.
198.
D. C. Lagoudas, D. Moorthy, M. A., Qidwai, and J.N. Reddy, Modeling of the

Thermomechanical Response of Active Laminates with SMA Strips Using the Layerwise
39
Finite Element Method, Journal of Intelligent Material Systems and Structures, Vol. 8, pp.
476-488, 1997.
199.
A. Khdeir and J.N. Reddy, Free and Forced Vibration of Cross-Ply Laminated
Composite Shallow Arches, Int. J. Solids & Structures, Vol. 34, No.10, pp. 1217-1234,
1997.
200.
K. Y. Lam, X. Q. Peng, G. R. Liu, and J.N. Reddy, A Finite-Element Model for

Piezoelectric Composite Laminates, Smart Materials and Structures, Vol. 6, No.5, pp. 583591, 1997.
201.
S. K. Kassegne and J.N. Reddy, A Layerwise Shell Stiffener and Stand-Alone Curved
Beam Element, Asian Journal of Structural Engineering, Vol. 2 Nos. 1 and 2, pp. 1-14,
1997.
202.
Y. Y. Wang, K. Y. Lam, G. R. Liu, J.N. Reddy, and J. Tani A Strip Finite Element Method
for Bending Analysis of Orthotropic Plates, JSME International Journal (A), Japan, Vol.
40, No.4, pp. 398-406, 1997.
203.
G. Rengarajan, R. Krishna Kumar, and J.N. Reddy, Numerical Modeling of Martensitic

Phase Transformations in Shape Memory Alloys, International Journal of Solids &
204.
T. Y. Ng, K. Y. Lam, and J.N. Reddy, Parametric resonance of a rotating cylindrical shell
subjected to periodic axial loads, Journal of Sound & Vibration, Vol. 214, No. 3, pp. 513529, 1998.
205.
G. N. Praveen and J.N. Reddy, Nonlinear Transient Thermoelastic Analysis of

Functionally Graded Ceramic-Metal Plates, Journal of Solids and Structures, Vol. 35, No.
33, pp. 4457-4476, 1998.
206.
T. Y. Ng, K. Y. Lam, and J.N. Reddy, Dynamic Stability of Cross-Ply Laminated

Composite Cylindrical Shells, Int. J. Mechanical Sciences, Vol. 40, No. 8, pp. 805-823,
1998.
207.
J.N. Reddy and C. M. Wang, Deflection Relationships between Classical and ThirdOrder Plate Theories, Acta Mechanica, Vol. 130, No. 3-4, pp. 199-208, 1998.
208.
G. N. Praveen and J.N. Reddy, Transverse Matrix Cracks in Cross-Ply Laminates: Stress
Transfer, Stiffness Reduction and Crack Opening Profiles, Acta Mechanica, Vol. 130, No.
3-4, pp. 227-248, 1998.
209.
S. K. Kassegne and J.N. Reddy, Local Behavior of Discretely Stiffened Composite Plates
and Cylindrical Shells," Composite Structures, Vol. 41, pp. 13-26, 1998.
210.
P. Bose and J.N. Reddy, Analysis of Composite Plates Using Various Plate Theories, art
1: Formulation and Analytical Results," Structural Engineering and Mechanics, Vol. 6, No.
6, pp. 583-612, 1998.
211.
P. Bose and J.N. Reddy, Analysis of Composite Plates Using Various Plate Theories,
Part 2: Finite Element Model and Numerical Results" Structural Engineering and
Mechanics, Vol. 6, No. 7, pp.727-746, 1998.
212.
C. M. Dakshina Moorthy and J.N. Reddy, Modeling of Laminates Using a Layerwise

Element with Enhanced Strains, Int. J. Numer. Meth. Engng., Vol. 43, pp. 755-779, 1998.
213.
J.N. Reddy and C. D. Chin, Thermomechanical Analysis of Functionally Graded

Cylinders and Plates, J. Thermal Stresses, Vol. 26, No. 1, pp. 593-626, 1998.
40
214.
J.A. Mitchell and J.N. Reddy, A Multilevel Hierarchical Preconditioner for Thin Elastic
Solids, Int. Journal for Numerical Methods Engineering, Vol. 43, pp. 1383-1400, 1998.
215.
A. Rao and J.N. Reddy, Computational Study of Shear-Induced Crystallization in

Polymers, Numerical Heat Transfer, Part A: Applications, Vol. 34(4), pp.357-368, 1998.
216.
J.N. Reddy, On Laminated Composite Plates with Integrated Sensors and Actuators,
Engineering Structures, Vol. 21, pp. 568-593, 1999.
217.
S. W. Gong, K. Y. Lam and J.N. Reddy, The Elastic Response of Functionally Graded
Cylindrical Shells to Low Velocity Impact, International Journal of Impact Engineering,
Vol. 22, No. 4, pp. 397-417, 1999.
218.
A. A. Khdeir and J.N. Reddy, Jordan Canonical Form Solution for Thermally Induced
Deformations of Cross-Ply Laminated Composite Beams, J. Thermal Stresses, Vol. 22(3),
pp. 331-346, 1999.
219.
T. Y. Ng, K. Y. Lam, and J.N. Reddy, Dynamic Stability of Cylindrical Panels with
Transverse Shear Effects" Int. J. Solids and Structures, Vol. 36(23), pp. 3483-3496, 1999.
220.
G. N. Praveen, C. D. Chin, and J.N. Reddy, Thermoelastic Analysis of a Functionally

Graded Ceramic-Metal Cylinder, ASCE Journal of Engineering Mechanics, Vol. 125, No.
11, pp. 1259-1267, 1999.
221.
C. T. Loy, K. Y. Lam, and J.N. Reddy, Vibration of Functionally Graded Cylindrical

Shells, Int. J. Mechanical Sciences, Vol. 41(3), pp. 309-324, 1999.
222.
J. A. Mitchell and J.N. Reddy, A High Performance Iterative Solution Procedure for the
Analysis of Structural Problems, J. High Performance Computing, Vol. 5, No. 1, pp. 3-13,
1999.
223.
J.N. Reddy, On the Dynamic Behavior of the Timoshenko Beam Finite Elements,
Sadhana (Journal of the Indian Academy of Sciences), Vol. 24, Part 3, pp. 175-198, 1999.
224.
A. A. Khdeir and J.N. Reddy, Free Vibrations of Laminated Composite Plates Using
Second-Order Shear Deformation Theory, Computers & Structures, Vol. 71(6), pp. 617626, 1999.
225.
C. M. Dakshina Moorthy and J.N. Reddy, Recovery of Interlaminar Stresses and Strain
Energy Release Rates in Composite Laminates, Finite Elements in Analysis and Design,
Vol. 33, pp. 1-27, 1999.
226.
J.N. Reddy, C. M. Wang, and S. Kitipornchai Axisymmetric Bending of Functionally

Graded Circular and Annular Plates, European Journal of Mechanics, Vol. 18, pp. 185-199,
1999.
227.
G. Shi, K. Y. Lam, S. T. E. Tay and J.N. Reddy, Assumed Strain Quadrilateral C0

Laminated Plate Element Based on Third-Order Shear Deformation Theory, Structural
Engineering Mechanics, Vol. 8(6), pp. 623-637, 1999.
228.
C.M. Wang, J.N. Reddy, and S. Kitipornchai, Relationship between Vibration

Frequencies of Reddy and Kirchhoff Polygonal Plates with Simply Supported Edges,
ASME Journal of Vibration and Acoustics, Vol. 122 (1), pp. 77-81, 2000.
229.
J.N. Reddy, Analysis of Functionally Graded Plates, Int. J. Numer. Meth. Engng., Vol.
47, pp. 663-684, 2000.
230.
Q. Liu and K. Y. Lam and J.N. Reddy, Substructure Simulation of Viscoelastic-Elastic

Multibody Systems, Journal of Vibration and Control, Vol. 6, No. 2, pp. 163-188, 2000.
41
231.
J. A. Mitchell and J.N. Reddy, A Hierarchical Iterative Procedure for the Analysis of
Composite Laminates, Comput. Meth. Appl. Mech. Engng., Vol. 181, pp. 237-260, 2000.
232.
J.N. Reddy and J. I. Barbosa, On Vibration Suppression of Magnetostrictive Beams,

Smart Materials and Structures, Vol. 9, pp. 49-58, 2000.
233.
K. K. Ang, J.N. Reddy and C.M. Wang, Displacement Control of Timoshenko Beams
via Induced Strain Actuators, Smart Materials and Structures, Vol. 9, pp. 1-4, 2000.
234.
J.N. Reddy, On the Derivation of the Superconvergent Timoshenko Beam Finite

Element, Int. J. Comput. Civil and Struct. Engng., Vol. 1, No. 2, pp. 71-84, 2000.
235.
J.N. Reddy and C. M. Wang, An Overview of the Relationships Between Solutions of

the Classical and Shear Deformation Plate Theories, Composites Science and Technology,
Vol. 60, pp. 2327-2335, 2000.
236.
S. C. Pradhan, C.T. Loy, K. Y. Lam, and J.N. Reddy, Vibration Characteristics of

Functionally Graded Cylindrical Shells Under Various Boundary Conditions, Applied
Acoustics, Vol. 61, pp. 111-129, 2000.
237.
J. P. Pontaza and J.N. Reddy, Numerical Simulation of Tubular Blown Film

Processing, Numerical Heat Transfer, Part A- Applications, Vol. 37, pp. 227-247, 2000.
238.
S. Mukherjee, J.N. Reddy and C. S. Krishnamoorthy, Convergence Properties and

Derivative Extraction of the Linear Independent Interpolation Shear Flexible Beam
Element, Int. J. Numer. Meth. Engng., Vol. 190, pp. 3475-3500, 2001.
239.
C. M. Wang, G. T. Lim, J.N. Reddy and K. H. Lee, Relationships Between Bending

Solutions of Reissner and Mindlin Plate Theories," Engineering Structures, Vol. 23, pp.
838-849, 2001.
240.
J.N. Reddy and Z.-Q Cheng, Three-Dimensional Solution of Smart Functionally Graded
Plates, Journal of Applied Mechanics, Vo. 68, pp. 234-241, March 2001.
241.
J.N. Reddy and Z.-Q Cheng, Deformations of Piezothermoelastic Laminates with

Internal Electrodes, ZAMM, Vol. 81, No. 5, pp. 347-359, 2001.
242.
J.A. Mitchell and J.N. Reddy, Study of Interlaminar Stresses in Composite Laminates
Subjected to Torsional Loading, AIAA J., Vol. 39, No. 7, pp. 1374-1382, 2001.
243.
G. Rengarajan and J.N. Reddy, On the Inelastic Behavior of Crystalline Silicon at

Elevated Temperatures, Journal of the Mechanics and Physics of Solids, Vol. 49, pp. 16651700, 2001.
244.
S. C. Pradhan, T.Y. Ng, K.Y. Lam and J.N. Reddy, Control of Laminated Composite
Plates Using Magnetostrictive Layers," Smart Materials and Structures, Vol. 10, pp. 657667, 2001.
245.
J.N. Reddy and S. Krishnan, Vibration Control of Laminated Plates Using Embedded
Smart Layers, Structural Engineering and Mechanics, Vol. 12, No. 2, pp. 135-156, 2001.
246.
A. Yavari and S. Sarkani and J.N. Reddy, ``General Solutions of Beams with Jump
Discontinuities on Elastic Foundation, Archive of Applied Mechanics, Vol. 71, No. 9, pp.
625-639, 2001.
247.
J.N. Reddy, C.M. Wang, G.T. Lim, and K.H. Ng Bending Solutions of the Levinson
Beams and Plates in Terms of the Classical Theories," Int. J. Solids & Structures, Vol. 38,
pp. 4701-4720, 2001.
42
248.
Y. Xiang and J.N. Reddy, ``Buckling and Vibration of Stepped, Symmetric Cross-Ply
Laminated Rectangular Plates, International Journal of Structural Stability and Dynamics,
Vol. 1, No. 3, pp. 385-408, 2001.
249.
A. Yavari, S. Sarkani and J.N. Reddy, `Òn Nonuniform Euler-Bernoulli and Timoshenko
Beams with Jump Discontinuities: Application of Distribution Theory, International
Journal of Solids and Structures, Vol. 38, pp. 8389-8406, 2001.
250.
T.Y. Ng, K. Y. Lam, K. M. Liew and J.N. Reddy, ``Dynamic Stability Analysis of
Functionally Graded Cylindrical Shells under Periodic Axial Loading, International
Journal of Solids and Structures, Vol. 38, pp. 1295-1309, 2001.
251.
J.N. Reddy and S. Mukherjee, A Practical Hybrid Interior Error Estimator for Localized
h-Adaptive FEA, Engineering Computations, Vol. 18, No. 5/6, pp. 480-515, 2001.
252.
J.N. Reddy and Z.Q. Cheng, Three-Dimensional Thermomechanical Deformations of

Functionally Graded Rectangular Plates, European Journal of Mechanics, A/Solids, Vol. 20,
No. 5, pp.841-860, 2001.
253.
Z.-Q. Cheng and J.N. Reddy, Octet Formalism for Kirchhoff Anisotropic Plates,
Proceedings of the Royal Society, London, A, Vol. 458, pp. 1499-1517, 2001.
254.
K.S. Surana, S. R. Petti, A. R. Ahmadi and J.N. Reddy, `òn p-Version Hierarchical
Interpolation Functions for Higher-Order Continuity Finite Element Models,
International Journal of Computational Engineering Science, Vol. 2, No. 4, pp. 653-673, 2001.
255.
Z. Q. Cheng and J.N. Reddy, Membrane-Like Vibration of Simply Supported Spherical

Shallow Shells of Polygonal Planform, J. Sound & Vibration, Vol. 249(1), pp. 189-195,
2002.
256.
C. M. Wang, Y.C. Yang and J.N. Reddy, Problems and Remedy for the Ritz Method in
Determining Stress Resultants of Corner Supported Rectangular Plates, Computers and
Structures, Vol. 80, pp. 145-154, 2002.
257.
C. M. Wang, Y.C. Yang, J.N. Reddy, and V. Thevendran, Improved Computation of

Stress Resultants in the p-Ritz method, Journal of Structural Mechanics, ASCE, Vol. 128,
No. 2, pp. 249257, February 2002.
258.
Z.-Q. Cheng and J.N. Reddy, Asymptotic Theory for Laminated Piezoelectric Circular
Cylindrical Shells, AIAA Journal, Vol. 40, No. 3, pp. 553-558, March 2002.
259.
G. R. Liu, X. L. Chen and J.N. Reddy, ``Buckling of Symmetrically Laminated Composite

Plates Using the Element-Free Galerkin Method, International Journal of Structural
Stability and Dynamics, Vol. 2, No. 3, pp. 281-294, 2002.
260.
K. M. Liew, Y. Q. Huang and J.N. Reddy, `À Hybrid Moving Least Squares and
Differential Quadrature (MLSDQ) Meshfree Method, International Journal of
Computational Engineering Science, Vol. 3, No. 1, pp. 1-12, 2002.
261.
J.N. Reddy and Z.-Q. Cheng, Frequency Correspondence Between Membranes and
Functionally Graded Spherical Shallow Shells of Polygonal Planform," Int. J. of
Mechanical Sciences, Vol. 44, No. 5, pp. 967-985, 2002.
262.
P. R. Gupta and J.N. Reddy, Buckling and Vibration of Orthotropic Plates with an
Internal Hinge, International Journal of Structural Stability and Dynamics, Vol. 2, No. 4, pp.
457-486, 2002.
263.
K. M. Liew, T.Y. Ng, X. Zhao, G. P. Zou, and J.N. Reddy, Harmonic Reproducing
Kernel Particle Method for Free Vibration Analysis of Rotating Cylindrical Shells,
43
Computer Methods in Applied Mechanics and Engineering, Vol. 191, No. 37-38, pp. 41414157, 2002.
264.
K.S. Surana, A. R. Ahmadi and J.N. Reddy, The k-Version of Finite Element Method for
Self-Adjoint Operators in BVP, International Journal of Computational Engineering Science,
Vol. 3, No. 2, pp. 155-218, 2002.
265.
K. H. Ng, J.N. Reddy and C. M. Wang, Bending of Sectorial Plates: Relationships with
Classical Solutions, Mechanics of Structures and Machines (current title: Mechanics Based
Design of Structures and Machines), Vol. 30, No. 4, pp. 579-612, 2002.
266.
S. Marfia, E. Sacco, and J.N. Reddy, Superelastic and Shape Memory Effects in
Laminated Shape-Memory-Alloy Beams, AIAA Journal, Vol. 41, No. 1, pp. 100-109,
January 2003.
267.
K. M. Liew, Y. Q. Huang, and J.N. Reddy, Moving Least Squares Differential

Quadrature Method and Its Application to the Analysis of Shear Deformable Plates, Int.
Journal Numerical Methods in Engineering, Vol. 56, No. 15, pp. 2331-2351, 2003.
268.
K. M. Liew, Y. Q. Huang, and J.N. Reddy, Vibration Analysis of Symmetrically

Laminated Plates Based on FSDT Using the Moving Least Squares Differential
Quadrature Method, Computer Methods in Applied Mechanics and Engineering, Vol. 192,
No. 19, pp. 2203-2222, 2003.
269.
Y. Xiang and J.N. Reddy, Natural Vibration of Rectangular Plates with Internal Line
Hinge Using the First Order Shear Deformation Plate Theory, Journal of Sound and
Vibration, Vol. 263, pp. 285-297, 2003.
270.
G. T. Lim and J.N. Reddy, On Canonical Bending Relationships for Plates, Int. J. Solids
271.
Z. Q. Cheng and J.N. Reddy, In-plane Rotational and Thickness-Twist Vibrations of

Polygonal Plates and Spherical Shallow Shells, Journal of Sound & Vibration, Vol. 263,
pp. 443-450, 2003.
272.
J.N. Reddy and Z.-Q. Cheng, Frequency of Functionally Graded Plates with ThreeDimensional Asymptotic Approach, Journal of Engineering Mechanics, Vol. 129 (8), pp.
896900, 2003.
273.
J. P. Pontaza and J.N. Reddy, Spectral/hp Least-Squares Finite Element Formulation for
the Navier-Stokes Equations, Journal of Computational Physics, Vol. 190, No. 2), pp.
523549, 2003.
274.
Z. Q. Cheng and J.N. Reddy, An Asymptotic Theory for Vibrations of

Inhomogeneous/Laminated Piezoelectric Plates, IEEE Transactions on Ultrasound,
Ferroelectrics and Frequency Control, Vol. 50, No. 11, pp. 15631569, 2003.
275.
K. M. Liew, J. Z. Zhang, T. Y. Ng and J.N. Reddy, Dynamic Characteristics of Elastic

Bonding in Composite Laminates: A Free Vibration Study, Journal of Applied Mechanics,
Vol. 70, No. 6, pp. 860870, Nov 2003.
276.
K.S. Surana, A. R. Ahmadi and J.N. Reddy, ``The k-Version of Finite Element Method for
Non-Self-Adjoint Operators in BVP, International Journal of Computational Engineering
Science, Vol. 4, No. 4, pp. 737812, 2003.
277.
A. Chakraborty, S. Gopalakrishnan, and J.N. Reddy, A New Beam Finite Element for
the Analysis of Functionally Graded Materials, International Journal of Mechanical
Sciences, Vol. 45, No. 3, pp. 519-539, 2003.
44
278.
Z. -Q Cheng and J.N. Reddy, Greens Functions for Infinite and Semi-Infinite
Anisotropic Thin Plates, Journal of Applied Mechanics, Vol. 70, No. 2, pp. 260267, 2003.
279.
S. J. Lee, J.N. Reddy, and F. Rostam-Abadi, Transient Analysis of Laminated Composite

Plates with Embedded Smart Material Layers, Finite Elements in Analysis and Design.,
Vol. 40, Nos. 5-6, pp. 463484, 2004
280.
J. P. Pontaza, D. Xu, J.N. Reddy, and K.S. Surana, Least-squares finite element models
of two-dimensional compressible flows, Finite Elements in Analysis and Design, Vol. 40,
Nos. 5-6, pp. 629644, 2004.
281.
A. Laulusa and J.N. Reddy, On Shear and Extensional Locking in Nonlinear Composite
Beams, Engineering Structures, Vol. 26, No. 2, pp. 151170, 2004.
282.
S. C. Pradhan and J.N. Reddy, Vibration Control of Composite Shells Using Embedded
Actuating Layers," Smart Materials and Structures, Vol. 13, No. 5, pp. 1245-1257, Oct 2004.
283.
K.S. Surana, A. R. Ahmadi and J.N. Reddy, `` The k-Version of Finite Element Method
for Nonlinear Operators in BVP, International Journal of Computational Engineering
Science, Vol. 5, No. 1, pp. 133-207, 2004.
284.
Z.-Q. Cheng and J.N. Reddy, Laminated Anisotropic Thin Plate with an Elliptic
Inhomogeneity, Mechanics of Materials, Vol. 36, No. 7, pp. 647-657, 2004.
285.
Z. Q. Cheng and J.N. Reddy, Greens Functions for Anisotropic Thin Plate with a Crack
or Anticrack, Int. J. Engineering Science, Vol. 42, pp. 271-289, 2004.
286.
R. Garcia Lage, C. M. Mota Soares, C. A. Mota Soares and J.N. Reddy, Layerwise Partial
Mixed Finite Element Analysis of Magneto-Electro-Elastic Plates, Computers &
287.
J. P. Pontaza and J.N. Reddy, Space-Time Coupled Spectral/hp Least-Squares Finite

Element Formulation for the Incompressible Navier-Stokes Equations, Journal of
Computational Physics, Vol. 197, No. 2, pp. 418-459, 2004.
288.
K. M. Liew, Y. Q. Huang, and J.N. Reddy, Analysis of General Shaped Thin Plates by
Moving Least Squares Differential Quadrature Method, Finite Elements in Analysis and
Design, Vol. 40, pp. 1453-1474, 2004.
289.
J. P. Pontaza and J.N. Reddy, Mixed Plate Bending Elements Based on Least-Squares
Formulation, International Journal for Numerical Methods in Engineering, Vol. 60, pp. 891922, 2004.
290.
K. M. Liew, X. L. Chen, and J.N. Reddy, Mesh-Free Radial Basis Function Method for
Buckling Analysis of Non-uniformly Loaded Arbitrarily Shaped Shear Deformable
Plates, Computer Methods in Applied Mechanics and Engineering, Vol. 193, Nos. 3-5, pp.
205-224, 2004.
291.
M. C. Ray and J.N. Reddy, Optimal Control of Thin Circular Cylindrical Laminated
Composite Shells Using Active Constrained Layer Damping Treatment, Smart Materials
and Structures, Vol. 13, pp. 64-72, 2004.
292.
M. C. Ray and J.N. Reddy, Effect of Delamination on the Active Constrained Layer
Damping of Laminated Composite Beams, AIAA Journal, Vol. 42, No. 6, 1219-1226,
2004.
293.
R. Garcia Lage, C. M. Mota Soares, C. A. Mota Soares and J.N. Reddy, Modeling of
Piezolaminated Plates using Layerwise Mixed Finite Elements, Computers & Structures,
Vol. 82, Nos. 23-26, pp. 1849-1863, 2004.
45
294.
J. E. Semedo Garo, C. M. Mota Soares, C. A. Mota Soares and J.N. Reddy, Analysis of
Laminated Adaptive Plate Structures Using Layerwise Finite Element Models,
Computers & Structures, Vol. 82, Nos. 23-26, pp. 1939-1959, 2004.
295.
R. Arciniega, P. B. Goncalves, and J.N. Reddy, Buckling and Postbuckling of Laminated

Cylindrical Shells Using the Third-Order Shear Deformation Theory, International
Journal of Structural Stability and Dynamics, Vol. 4, No. 3, pp. 293-312, 2004.
296.
R. Ranjan, J. Irudayaraj, J.N. Reddy, A. S. Mujumdar, Finite Element

Simulation and Validation of Stepwise Drying of Bananas, Journal of Numerical Heat
Transfer, Part A- Applications, Vol. 45, No. 10, pp. 997-1012, Jun 2004.
297.
J.N. Reddy and R. A. Arciniega, Shear Deformation Plate and Shell Theories: Stavsky to
Present, Mechanics of Advanced Materials and Structures, Vol. 11, No. 6, Part II, pp. 535516, 2004.
298.
P. Schembri, D. L. Crane and J.N. Reddy, A Three-Dimensional Computational

Procedure for Reproducing Meshless Methods and the Finite Element Method,
International Journal for Numerical Methods in Engineering, Vol. 61 (6), pp. 896-927, 2004.
299.
R. Garcia Lage, C. M. Mota Soares, C. A. Mota Soares and J.N. Reddy, Analysis of
Adaptive Plate Structures using Mixed Layerwise Finite Elements, Composite Structures,
Vol. 66, Nos. 1-4, pp. 269-276, 2004.
300.
M. Wong, G. T. Lim, A. Moyse, J.N. Reddy, and H.-J. Sue, A New Test Methodology for
Evaluating Scratch Resistance of Polymers, Wear, Vol. 256, No. 11-12, pp.1214-1227, Jun
2004.
301.
S. J. Lee and J.N. Reddy, Nonlinear Deflection Control of Laminated Plates Using the
Shear Deformation Theory, International Journal of Mechanics and Materials in Design,
Vol. 1, No. 1, pp. 33-61, 2004.
302.
M. C. Ray and J.N. Reddy, Performance of Piezoelectric Fiber Reinforced Composites

for Active Structural-Acoustic Control of Laminated Plates, IEEE Transactions on
Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 51, No. 11, pp. 1477-1490, 2004.
303.
T. Y. Ng, T. Y. Jiang, H. Li, K. Y. Lam, and J.N. Reddy, A Coupled Field Study on The
Non-Linear Dynamic Characteristics of an Electrostatic Micropump, Journal of Sound
and Vibration, Vol. 273, pp. 989-1006, Jun 2004.
304.
S. J. Lee and J.N. Reddy, Vibration Suppression of Laminated Shell Structures

Investigated by Higher-Order Shear Deformation Theory, Smart Materials and
Structures, Vol. 13, No. 5, pp. 1176-1194, Oct 2004.
305.
W. Aliaga and J.N. Reddy, Nonlinear Thermoelastic Response of Functionally Graded

Plates Using the Third-Order Plate Theory, International Journal of Computational
Engineering Science, Vol. 5, No. 4, pp. 753-780, 2004.
306.
J. P. Pontaza and J.N. Reddy, Least-Squares Finite Element Formulation for ShearDeformable Shells, Computer Methods in Applied Mechanics and Engineering, Vol. 194 (2124), pp. 2464-2493, 2005.
307.
G. T. Lim, M. -H. Wong, J.N. Reddy, and H.-J. Sue, An Integrated Approach towards
the Study of Scratch Damage of Polymer, Journal of Coatings Technology Research (JCT
Research), Vol. 2, No. 5, pp. 361-369, 2005.
46
308.
J. P. Pontaza and J.N. Reddy, Least-Squares Finite Element Formulation for OneDimensional Reactive Transfer, Journal of Quantitative Spectroscopy and Radiative
Transfer, Vol. 95, pp. 387-406, 2005.
309.
S. J. Lee and J.N. Reddy, Non-linear Response of Laminated Composite Plates Under
Thermomechanical Loading, International Journal of Non-Linear Mechanics, Vol. 40 (7),
pp. 971-985, 2005.
310.
K. M. Liew, J. Ren, and J.N. Reddy, Numerical Simulation of Thermomechanical

Behaviours of Shape Memory Alloys via a Nonlinear Meshfree Galerkin Formulation,
International Journal for Numerical Methods in Engineering, Vol. 63, No. 7, pp. 1014-1040,
June 2005.
311.
Z. Q. Cheng and J.N. Reddy, ``Structure and Properties of the Fundamental Elastic Plate
Matrix, ZAMM, Vol. 85, No. 10, pp. 721-739, 2005.
312.
M. C. Ray and J.N. Reddy, Active control of laminated cylindrical shells using
piezoelectric fiber reinforced composites, Composites Science and Technology, Vol. 65, pp.
1226-1236, 2005.
313.
Y. Urthaler and J.N. Reddy, A Corotational Finite Element Formulation for the Analysis
of Planar Beams, Communications in Numerical Methods in Engineering, Vol. 21, No. 10,
pp. 553-570, 2005.
314.
D. H. Robbins, Jr., J.N. Reddy, and F. Rostam-Abadi, An Efficient Continuum Damage

Model and its Application to Shear Deformable Laminated Plates, Mechanics of
Advanced Materials and Structures, Vol. 12, No. 6, pp. 391-412, 2005.
315.
H. Santos, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy, A Semi-Analytical

Finite Element Model for the Analysis of Laminated 3D Axisymmetric Shells: Bending,
Free Vibration and Buckling, Composite Structures, Vol. 71, Nos. 3-4, pp. 273-281, Dec
2005.
316.
R. A. Arciniega and J.N. Reddy, A Consistent Third-Order Shell Theory with

Application to Bending of Laminated Composite Cylindrical Shells, AIAA Journal, Vol.
43, No. 9, pp. 2024-2038, 2005.
317.
V. U. Unnikrishnan and J.N. Reddy, Characteristics of Silicon-Doped CNT-Reinforced

Nanocomposites, Int. Journal for Multiscale Computational Engineering, Vol. 3, No. 4, pp.
437-450, 2005.
318.
Z. Q. Cheng, J.N. Reddy, and Y. Xiang Buckling of a Thin Circular Plate by In-Plane
Gravity, Journal of. Applied Mechanics, Vol. 72, Issue. 2, pp.296-298, 2005.
319.
J. P. Pontaza, H.C. Chen and J.N. Reddy, A local-analytic-based discretization

procedure for the numerical solution of incompressible flows, International Journal for
Numerical Methods in Fluids, Vol. 49, No. 6, pp. 657-699, 2005.
320.
D. H. Robbins, J.N. Reddy and F. Rostam-Abadi, Layerwise modeling of progressive

damage in fiber-reinforced composite laminates, International Journal of Mechanics and
Materials in Design, Vol. 2, pp. 165-182, 2005.
321.
Y. Y. Lee, H. Y. Sun, and J.N. Reddy, Nonlinear Finite Element Modal Approach for the
Large Amplitude Free Vibration of Symmetric and Unsymmetric Composite Plates,
International Journal for Numerical Methods in Engineering, Vol. 65, pp. 45-61, 2006.
322.
N. Murgude and J.N. Reddy, Nonlinear Analysis of Microbeam under Electrostatic

Loading, Mechanics of Advanced Materials and Structures, Vol. 13, No. 1, pp. 13-32, 2006.
47
323.
J. P. Pontaza and J.N. Reddy, Least-squares finite element formulations for viscous
compressible and incompressible fluid flows, Computer Methods in Applied Mechanics
and Engineering, vol. 195, 2454-2494, 2006.
324.
K.S. Surana, R. K. Maduri, P. W. TenPas, J.N. Reddy, Elastic Wave Propagation in

Laminated Composites Using the Space-Time Least-Squares Formulation in h,p,k
Framework, Mechanics of Advanced Materials and Structures, Vol. 13, No. 2, pp. 161-196,
2006.
325.
K.S. Surana, A. Rajwani, and J.N. Reddy, The k-Version Finite Element Method for
Singular Boundary-Value Problems with Application to Linear Fracture Mechanics,
International Journal of Computational Methods in Engineering Science and Mechanics, Vol. 7,
No. 3, pp. 217-239, 2006.
326.
M. McCutcheon, T. Creasy, and J.N. Reddy, Damping Composite Materials by Machine

Augmentation, Journal of Sound and Vibration, Vol. 294, Nos. 4-5, pp. 828-840, 2006.
327.
C. W. Lim, Z. -Q. Cheng, and J.N. Reddy, Natural Frequencies of Laminated

Piezoelectric Plates Containing Internal Electrodes, ZAMM, Vol. 86, No. 5, pp. 410-420,
2006.
328.
H. Santos, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy, A Finite Element
Model for the Analysis of 3D Axisymmetric Laminated Shells with Piezoelectric Sensors
and Actuators, Composite Structures, Vol. 75, No. 1-4, pp. 170-178, Sep 2006.
329.
V. Prabhakar and J.N. Reddy, Spectral/hp Penalty Least-Squares Finite Element

Formulation for the Steady Incompressible Navier-Stokes Equations, Journal of
Computational Physics, Vol. 215, No. 1, pp. 274-297, Jun 2006.
330.
K.S. Surana, P. Gupta, P.W. Tenpas and J.N. Reddy, h, p, k Least Squares Finite
Element Processes for 1-D Helmholtz Equation, International Journal for Computational
Methods in Engineering Science and Mechanics, Vol. 7, No. 4, pp.263-291, 2006.
331.
K.S. Surana, A. Mohammed, J.N. Reddy, P. W. Tenpas, k-Version of Finite Element

Method in 2-D Polymer Flows: Oldroyd-B Constitutive Model , International Journal of
Numerical Methods in Fluids, Vol. 52, No. 2, pp. 119-162, Sep 2006.
332.
S. J. Lee, J.N. Reddy, and F. Rostam-Abadi, Nonlinear Finite Element Analysis of

Laminated Composite Shells with Actuating Layers, Finite Elements in Analysis and
Design, Vol. 43, No. 1, pp. 1-21, Nov 2006.
333.
V. Prabhakar and J.N. Reddy, Orthogonality of Modal Bases in hp Finite Element

Models, International Journal of Numerical Methods for Fluids, Vol. 54, No. 11, pp. 12911312, 2007.
334.
K.S. Surana, S. Allu, P. W. Tenpas, and J.N. Reddy, k-Version Finite Element Method
in Gas Dynamics: Higher Order Global Differentiability Numerical Solutions,
International Journal for Numerical Methods in Engineering, Vol. 69, No. 6, pp. 1109-1157,
2007.
335.
R. A. Arciniega and J.N. Reddy, Tensor-based Finite Element Formulation for

Geometrically Nonlinear Analysis of Shell Structures, Computer Methods in Applied
Mechanics and Engineering, Vol. 196, Nos. 4-6, pp. 1048-1073, 2007.
336.
K.S. Surana, J.N. Reddy, and S. Allu, The k-version of Finite Element Method for Initial
Value Problems: Mathematical and Computational Framework, Int. J. Comp. Meth.
Engng. Sci. Mech., Vol. 8, No. 3, pp. 123-136, 2007.
48
337.
K.S. Surana, M. K. EngelKemier, J.N. Reddy and P.W. TenPas, k-version Least Squares
Finite Element Processes for 2-D Generalized Newtonian Fluid Flows, Int. J. Comp.
Meth.. Eng. Sci. and Mechanics, Vol. 8, 243-261, 2007.
338.
R. A. Arciniega and J.N. Reddy, Large Deformation Analysis of Functionally Graded

Shells, International Journal of Solids and Structures, Vol. 44, No. 6, pp. 2036-2052, 2007.
339.
R. S. Karedla and J.N. Reddy, Modeling of Crack Tip High Inertia Zone in Dynamic
Brittle Fracture, Engineering Fracture Mechanics, Vol. 74(13), pp 2084-2098, 2007.
340.
G.U. Unnikrishnan , V. U. Unnikrishnan, and J.N. Reddy, Constitutive Material

Modeling of Cell: A Micromechanics Approach, Journal of Biomechanical Engineering
Transactions of ASME, Vol. 129, No. 3, pp. 315-323, 2007.
341.
H. Jiang, G. T. Lim, J.N. Reddy, and H. J. Sue, Finite Element Method Parametric Study
on Scratch Behavior of Polymers, Journal of Polymer Science Part B-Polymer Physics, Vol.
45, No. 12, pp. 1435-1447, Jun 2007.
342.
K.S. Surana, P. Gupta, and J.N. Reddy, Galerkin and Least-Squares Finite Element
Processes for 2-D Helmholtz Equation in h, p, k Framnework, Int. J. Comp. Meth. Engng.
Sci. Mech., Vol. 8, No. 5, pp. 341-361, 2007.
343.
J.N. Reddy, Nonlocal Theories for Bending, Buckling and Vibration of Beams,
International Journal of Engineering Science, Vol. 45, pp. 288-307, 2007.
344.
K.S. Surana, R. Kanthi Mahanthi, and J.N. Reddy, Galerkin/Least-Squares Finite

Element Processes for BVP in h, p, k Mathematical Framnework, Int. J. Computational
Methods in Engineering Science and Mechanics, Vol. 8, No. 6, pp. 439-462, 2007.
345.
V. U. Unnikrishnan, G.U. Unnikrishnan, J.N. Reddy, and C. T. Lim, "AtomisticMesoscale Coupled Mechanical Analysis of Polymeric Nanofibers," Journal of Materials
Science, Vol. 42, No. 21, pp. 8844-8852, 2007.
346.
V. Prabhakar and J.N. Reddy, "A Stress-based Least-Squares Finite-element Model for
Incompressible Navier-Stokes Equations," International Journal for Numerical Methods in
Fluids, Vol. 54, No. 11, pp. 1369-1385, 2007.
347.
P. Lu, P. Q. Zhang, H.P. Lee, C.M. Wang, and J.N. Reddy, Nonlocal Elastic Plate
Theories, Proceedings of the Royal Society A Mathematical Physical and Engineering
Sciences, London, Vol. 463, pp. 3225-3240, 2007.
348.
J. Ju, B. D. Pickle, R. J. Morgan, and J.N. Reddy, An Initial and Progressive Failure
Analysis for Cryogenic Composite Fuel Tank Design, Journal of Composite Materials, Vol.
41, pp. 2545-2568, 2007.
349.
V. Prabhakar, J. Pontaza, and J.N. Reddy, A Collocation Penalty Least-squares Finite

Element Formulation for Incompressible Flows, Computer Methods in Applied Mechanics
and Engineering, Vol. 197, pp. 449-463, 2008.
350.
F. Moleiro, C. M. Mota Soares, C. A. Mota Soares, J.N. Reddy, Mixed Least Squares
Finite Element Model for the Static Analysis of Laminated Composite Plates, Computers
& Structures , Vol. 86(9), pp 826-838, 2008.
351.
K.S. Surana, L. R. Anthoni, S. Allu, and J.N. Reddy, Strong and Weak Form of the
Governing Differential Equations in Least Squares Finite Element Processes in h, p. k
Framework, Int. J. Computational Methods in Engineering Science and Mechanics, Vol. 9,
No. 1, pp. 1-24, 2008.
49
352.
D. H. Robbins, Jr. and J.N. Reddy, Adaptive Hierarchical Kinematics in Modeling

Progressive Damage and Global Failure in Fiber-Reinforced Composite Laminates,
Journal of Composite Materials, Vol. 42, No. 6, pp. 569-592, 2008.
353.
H. Santos, C. M. Mota Soares, C.A. Mota Soares, J.N. Reddy, A Finite Element Model
for the Analysis of 3D Axisymmetric Laminated Shells with Piezoelectric Sensors and
Actuators: Bending and Free Vibrations, Computers & Structures, Vol. 86 (9), pp 940-947,
2008.
354.
Y. Urthaler and J.N. Reddy, A Mixed Finite Element for the Nonlinear Bending
Analysis of Laminated Composite Plates based on FSDT, Mechanics of Advanced
Materials and Structures, Vol. 15, No. 5, pp. 335-354, 2008.
355.
R. Gunes and J.N. Reddy, Nonlinear Analysis of Functionally Graded Circular Plates
Under Different Loads and Boundary Conditions, International Journal of Structural
Stability and Dynamics, Vol. 8, No. 1, pp. 131-159, 2008.
356.
J.N. Reddy and S. D. Pang, ``Nonlocal Continuum Theories of Beams for the Analysis of
Carbon Nanotubes, Applied Physics Letters, Vol. 103, pp. 023511-1 to 023511-16, 2008.
357.
K.S. Surana, S. Bhola, J.N. Reddy, and P. W. TenPas, k-Version of finite element method
in 2D-polymer flows: Upper convected Maxwell model, Computers and Structures, Vol.
86, Nos. 17-18, pp. 1782-1808, 2008.
358.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Multiscale Homogenization

Based Analysis of Polymeric Nanofiber Scaffolds, Mechanics of Advanced Materials and
359.
Rakesh Ranjan and J.N. Reddy, Convective Heat Transfer in Porous Materials,
Encyclopedia of Agricultural, Food, and Biological Engineering, April 2008.
360.
V. Prabhakar and J.N. Reddy, Spectral/hp Penalty Least-squares Finite Element

Formulation for Unsteady Incompressible Flows, International Journal of Numerical
Methods for Fluids, Vol. 58 (3), pp. 287-306, 2008.
361.
V. U. Unnikrishnan, D. Banerjee, and J.N. Reddy, Atomistic-Mesoscale Interfacial

Resistance Based Thermal Analysis of Carbon Nanotube Systems, International Journal
of Thermal Sciences, Vol. 47, No. 12, pp. 1602-1609, 2008.
362.
K.S. Surana, S. Allu, J.N. Reddy and P. W. TenPas, Least-Squares Finite Element
Processes in h,p,k Mathematical and Computational Framework for a non-linear
conservation law, Int. J. Num. Methods in Fluids, Vol. 57, No. 10, pp. 1545-1568, 2008.
363.
H. Santos, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, A Semi-Analytical Finite
Element Model for the Analysis of Cylindrical Shells Made of Functionally Graded
Materials Under Thermal Shock, Composite Structures, Vol. 86, pp. 10-21, 2008 .
364.
V. U. Unnikrishnan, J.N. Reddy, D. Banerjee, and F. Rostam-Abadi, Thermal

Characteristics of Defective Carbon Nanotube-Polymer Nanocomposites, Interaction and
Multiscale Mechanics, An International Journal, Vol. 1, No. 4, pp. 397-410, 2008.
365.
Z. S. Shao, K. K. Ang, J.N. Reddy, and T. J. Wang, Nonaxisymmetric Thermomechanical

Analysis of Functionally Graded Hollow Cylinders, Journal of Thermal Stresses, Vol. 31,
pp. 515-536, 2008.
366.
H.M. Ma, X.-L. Gao, and J.N. Reddy, A Microstructure-Dependent Timoshenko Beam
Model Based on a Modified Couple Stress Theory, Journal of the Mechanics and Physics of
Solids, Vol. 56, pp. 3379-3391, 2008.
50
367.
V. U. Unnikrishnan, Unnikrishnan, G.U., Reddy, J.N., and F. Rostam-Abadi Spectral/hp

based Asymptotic Expansion Homogenization of Heterogeneous Media: Analysis of
Carbon Nanotube Nanostructures, Computer and Experimental Simulations in Engineering
and Science, Issue 3, pp. 61-78, December 2008.
368.
Sai Sudha Ramesh, C. M. Wang, J.N. Reddy, and K.K. Ang, Computation of Stress
Resultants in Plate Bending Problems using Higher-Order Triangular Elements,
Engineering Structures, Vol. 30, pp. 26872706, 2008.
369.
A. Ahmadi, K.S. Surana, R. K. Maduri, A. Romkes, and J.N. Reddy, Higher Order
Global Differentiability Local Approximations for 2-D Distorted Quadrilateral
Elements, International Journal of Computational Methods in Engineering Science and
Mechanics, Vol. 10, No. 1, pp. 1-19, 2009.
370.
F. Moleiro, C.M. Mota Soares, C.A. Mota Soares and J.N. Reddy, Mixed Least-Squares
Finite Element Models for Static and Free Vibration Analysis of Laminated Composite
Plates, Computer Methods in Applied Mechanics and Engineering, Vol. 198 (21-26), pp.
1848-1856, 2009.
371.
R. Maduri, K.S. Surana, A. Romkes, and J.N. Reddy, Higher Order Global Differentiability
Local Approximations for 2-D Distorted Triangular Elements, International Journal of
Computational Methods in Engineering Science and Mechanics, Vol. 10, No. 1, pp. 20-25,
2009.
372.
K.S. Surana, K. M. Deshpande, A. Romkes, and J.N. Reddy, Numerical Simulations of

BVPs and IVPs in Fiber Spinning using Giesekus Constitutive Model in hpk
Framework, International Journal of Computational Methods in Engineering Science and
373.
M. Bayat, B. B. Sahari, M. Saleem, A. M. S. Hamouda, and J.N. Reddy, Thermo Elastic

Analysis of Functionally Graded Rotating Disks with Temperature-Dependent Material
Properties: Uniform and Variable Thickness, International Journal of Mechanics and
Materials in Design, Vol. 5, No. 3, pp. 263-279, 2009.
374.
S. Allu, K.S. Surana, A. Romkes, and J.N. Reddy, Numerical Solutions of BVPs in 2-D
Viscous Compressible Flows using hpk Framework, International Journal of
Computational Methods in Engineering Science and Mechanics, Vol. 10(2), pp. 158-171, 2009.
375.
K.S. Surana, K. M. Deshpande, A. Romkes, and J.N. Reddy, Computations of

Numerical Solutions in Polymer Flows Using Giesekus Constitutive Model in the hpk
Framework with Variationally Consistent Integral Forms, International Journal of
Computational Methods in Engineering Science and Mechanics, Vol. 10(5), pp. 317-344, 2009.
376.
G.U. Unnikrishnan, V. U. Unnikrishnan, J.N. Reddy, Tissue-fluid Interface Analysis

using Biphasic Finite Element Method, Computer Methods in Biomechanics and Biomedical
Engineering, Vol. 12, no. 2, pp. 165-172, 2009.
377.
K.S. Surana, S. Allu, A. Romkes, and J.N. Reddy, Evolution, Propagation, Reflection,
and Interactions of 1D-Normal Shocks in Air and fc70 Using hpk Finite Element
Computational Framework, International Journal of Computational Methods in Engineering
Science and Mechanics, Vol. 10, No. 5, pp. 370-392, 2009.
378.
D.D.T.K. Kulathunga, K.K. Ang, and J.N. Reddy, Accurate Modeling of Buckling of
Single- and Double-Walled Carbon Nanotubes based on Shell Theories, Journal of
Physics, Condensed Matter, Vol. 21, No. 43, 435301 (8 pp), 2009.
51
379.
D. Nunez, K.S. Surana, A. Romkes, and J.N. Reddy, J-Integral for Mode I Linear Elastic
Fracture Mechanics in h, p, k Mathematical and Computational Framework,
International Journal of Computational Methods in Engineering Science and Mechanics, Vol.
10, No. 5, pp. 345-369, 2009.
380.
Sai Sudha Ramesh, C. M. Wang, J.N. Reddy, and K.K. Ang, A Higher-Order Plate
Element for Accurate Prediction of Interlaminar Stresses in Laminated Composite
Plates, Composite Structures, Vol. 91, No. 3, pp. 337-357, 2009.
381.
J.N. Reddy and C. W. Wang, Bending, Buckling, and Frequency Relationships between
the Euler-Bernoulli and Timoshenko Non-Local Beam Theories, Asian Journal of Civil
Engineering (Building and Housing), Vol. 10, No. 3, 2009.
382.
H. Santos, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy, A Semi-Analytical

Finite Element Model for the Analysis of Cylindrical Shells Made of Functionally
Graded Materials, Composite Structures, Vol. 91, No. 4, 99. 427-432, 2009.
383.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Multiscale Nonlocal ThermoElastic Analysis of Graphene Nanoribbons, Journal of Thermal Stresses, Vol. 32, No. 10,
pp. 1087-1100, 2009.
384.
R. Aghababaei and J.N. Reddy, Nonlocal Third-Order Shear Deformation Plate Theory
with Application to Bending and Vibration of Plates, Journal of Sound and Vibration, Vol.
326, Nos. 1 and 2, pp. 277-289, 2009.
385.
C. Maletta, A. Falvo, F. Furgiuele, and J.N. Reddy, A Phenomenological Model for

Superelasticity in NiTi Alloys, Smart Materials and Structures, Vol. 18, No. 2, Article
number 025005, 2009.
386.
Wook Jin Na and J.N. Reddy, Delamination In Cross-Ply Laminated Beams Using the
Layerwise Theory, Asian Journal of Civil Engineering (Building and Housing), Vol. 10, No. 4,
pp. 451-480, 2009.
387.
Rakesh Ranjan and J.N. Reddy,hp-Spectral Finite Element Analysis of Shear

Deformable Beams and Plates, Journal of Solid Mechanics, Vol. 1. No. 3, pp. 245-259, 2009.
388.
J.N. Reddy, Canonical Relationships between Bending Solutions of Classical and Shear
Deformation Beam and Plate Theories, Annals of Solid and Structural Mechanics, Vol. 1,
No.1, pp. 9-27, 2010 (DOI: 10.1007/s12356-009-0002-4).
389.
L. M. S. Castro, A. J. M. Ferreira, S. Bertoluzza, R. C. Batra, and J.N. Reddy, A wavelet

collocation method for the static analysis of sandwich plates using a layerwise theory,
Composite Structures, Vol. 92, pp. 1786-1792, 2010 (doi:10.1016/j.compstruct.2010.01.021).
390.
M. Amabili and J.N. Reddy, A new Non-linear Higher-order Shear Deformation Theory
for Large-amplitude Vibrations of Laminated Doubly Curved Shells, International
Journal of Non-Linear Mechanics, Vol. 45, No. 4, pp. 409-418, 2010
(doi:10.1016/j.ijnonlinmec.2009.12.013).
391.
Y. Y. Lee, X. Zhao, and J.N. Reddy, Postbuckling analysis of functionally graded plates
subject to compressive and thermal loads, Computer Methods in Applied Mechanics and
Engineering, Vol. 199, 1645-1653, 2010(doi:10.1016/j.cma.2010.01.008).
392.
Wooram Kim and J.N. Reddy, Novel Finite Element Models for Nonlinear Analysis of
Plates, Latin American Journal of Solids and Structures, Vol. 7, No.2, pp. 201-226, 2010.
393.
Ameeta Raut and J.N. Reddy, Evaluation of Least-Squares Finite Element Models of
Beams, Asian Journal of Civil Engineering (Building and Housing), Vol. 11, No. 1, 2010.
52
394.
Feifei Cheng, G.U. Unnikrishnan, and J.N. Reddy Micro-Constituent Based Viscoelastic
Finite Element Analysis of Biological Cell, International Journal of Applied Mechanics, Vol.
2, No. 2, pp. 229-249, 2010.
395.
Nellie Rajarova and J.N. Reddy, Least-squares finite element models of the poisson
equation in two dimensions, Computer and Experimental Simulations in Engineering and
Science, Issue 7, pp. 48-61, 2010.
396.
C. M. Wang, Y. Y. Zhang, Y. Xiang, and J.N. Reddy, Recent studies on buckling of

carbon nanotubes, Applied Mechanics Reviews, vol. 63, 030804-1 to 030804-18, May 2010.
397.
Wook Jin Na and J.N. Reddy, Multiscale analysis of transverse cracking in cross-ply
laminated beams using the layerwise theory, Journal of Solid Mechanics, Vol. 2, No. 1, pp.
1-18, 2010.
398.
Douglas P. Wickert, Robert A. Canfield, and J.N. Reddy, Least-squares continuous

sensitivity shape optimization for structural elasticity applications, AIAA Journal, Vol.
48, No. 12, pp. 2752-2762, December 2010.
399.
K.S. Surana, Y. Ma, A. Romkes, and J.N. Reddy, Development of Mathematical Models
and Computational Framework for Multi-physics Interaction Processes, Mechanics of
Advanced Materials and Structures, Vol. 17, No. 7, pp. 488-508, 2010.
400.
K.S. Surana, Y. Ma, A. Romkes, and J.N. Reddy, The Rate Constitutive Equations and
Their Validity for Progressively Increasing Deformation, Mechanics of Advanced
Materials and Structures, Vol. 17, No. 7, pp. 509-533, 2010.
401.
G. S. Payette and J.N. Reddy, Nonlinear quasi-static finite element formulations for
viscoelastic euler-bernoulli and timoshenko beams, International Journal for Numerical
Methods in Biomedical Engineering, Vol. 26, No. 12, pp. 1736-1755, 2010.
402.
H. M. Ma, X.-L. Gao, and J.N. Reddy, A non-classical reddy-levinson beam model
based on a modified couple stress theory, International Journal for Multiscale
Computational Engineering, Vol. 8, No. 2, pp. 167-180, 2010.
403.
D D T K Kulathunga, K. K. Ang, and J.N. Reddy, Molecular dynamics analysis on

buckling of defective carbon nanotubes, Journal of Physics: Condensed Matter, Vol. 22,
No. 34, 345301, 2010.
404.
F. Moleiro, C. M. Mota Soares, C. A. Mota Soares, J.N. Reddy, Layerwise mixed leastsquares finite element models for static and free vibration analysis of multilayered
composite plates, Composite Structures, Vol. 92, No. 9, pp. 2328-2338, 2010.
405.
J.N. Reddy, Nonlocal nonlinear formulations for bending of classical and shear
deformation theories of beams and plates, International Journal of Engineering Science,
Vol. 48, No. 11, pp. 1507-1518, 2010.
406.
K.S. Surana, J.N. Reddy, and A. Romkes, h, p, k Mathematical and computational finite
element framework with variationally consistent integral forms for boundary value and
initial value problems, Acta Mechanica Solida Sinica, Vol. 23(special issue), pp. 12-25,
December 2010.
407.
J.N. Reddy, G.U. Unnikrishnan, and V. U. Unnikrishnan, multiscale modeling of

biological systems,Acta Mechanica Solida Sinica, Vol. 23 (special issue), pp. 26-32,
December 2010.
53
408.
J. V. Araujo dos Santos and J.N. Reddy, A Model for Free Vibration Analysis of
Timoshenko Beams with Couple Stress, Acta Mechanica Solida Sinica, Vol. 23 (special
issue), pp. 240-248, December 2010.
409.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Thermo-mechanical Analysis

of Nano-Graphene Systems,Acta Mechanica Solida Sinica, Vol. 23(special issue), pp. 303306, December 2010.
410.
K.S. Surana, Y. T. Ma, J.N. Reddy, and A. Romkes, Development of mathematical

models for multi-physics interaction processes, Acta Mechanica Solida Sinica, Vol.
23(special issue), pp. 307-311, December 2010.
411.
G.U. Unnikrishnan, V. U. Unnikrishnan, Reddy, J.N., and Lim, C.T., Review on the
constitutive models of tumor tissue for computational analysis, Applied Mechanics
Reviews, Vol. 63, No. 4, 2010.
412.
Wooram Kim and J.N. Reddy, A comparative study of least-squares and the weak-form
galerkin finite element models for the nonlinear analysis of timoshenko beams, Journal
of Solid Mechanics, Vol. 2, No.2, pp. 101-114, 2010.
R. Ranjan and J.N. Reddy, "hp-spectral method based analysis of updated lagrangian
formulations for modelling large deformations of structures," International Journal:
Computer and Experimental Simulations in Engineering and Science, Vol. 1, No. 6, pp. 76-91,
2010. (a figure from the figure was selected as the cover for the issue).
R. Ranjan and J.N. Reddy, Convective heat transfer: porous materials, Encyclopedia of
Agricultural and Biological Engineering (EAFE), Part2, October 2010.
413.
414.
415.
C. M. C. Roque, A. J. M. Ferreira, A. M. A. Neves, C. M. Mota Soares, J.N. Reddy, and R.

M. N. Jorge, Transient analysis of composite plates by radial basis functions in a
pseudospectral framework, Computers and Structures, Vol. 29, pp. 161-169, 2011.
416.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Multiscale analysis of carbon

nanotube-reinforced nanofiber scaffolds Composite Structures, Vol. 93, No. 2, pp. 1008-1014, 2011.
417.
R. Gunes, M. Aydin, M. K. Apalak, and J.N. Reddy, The elasto-plastic impact analysis
of functionally graded circular plates under low-velocities, Composite Structures, Vol. 93,
No. 2, pp. 860-869, 2011.
418.
R. Aghababaei, S. P. Joshi, and J.N. Reddy, Nonlocal continuum crystal plasticity with
internal residual stresses, Journal of the Mechanics and Physics of Solids, Vol. 59, pp. 713731, 2011.
419.
G. S. Payette and J.N. Reddy, On the roles of minimization and linearization in least
squares finite element models of nonlinear boundary-value problems, Journal of
Computational Physics, Vol. 230, No. 9, pp. 3589-3613, 2011, doi:10.1016/j.jcp.2011.02.002.
420.
A. J. M. Ferreira, C. M. C. Roque, A. M. A. Neves, R. M. N. Jorge, C. M. Mota Soares, and

J.N. Reddy, Buckling analysis of isotropic and laminated plates by radial basis
functions according to a higher-order shear deformation theory, Thin-Walled Structures,
Vol. 49, No. 7, pp. 804-811, 2011 (DOI:10.1016/j.tws.2011.02.005).
421.
Yiping Liu and J.N. Reddy, A non-local curved beam model based on a modified
couple stress theory, International Journal of Structural Stability and Dynamics, Vol. 11,
No. 3, pp. 495-512, 2011 (DOI: 10.1142/S0219455411004233).
54
422.
K.S. Surana, L. Euler, J.N. Reddy, and A. Romkes, Methods of approximation in hpk
framework for odes in time resulting from decoupling of space and time in IVPs,
American Journal of Computational Mathematics, Vol. 1, No. 2, pp. 83-103, June 2011
(published Online doi:10.4236/ajcm.2011.12009; http://www.scirp.org/journal/ajcm).
423.
C. M. C. Roque, A. J. M. Ferreira, and J.N. Reddy, Analysis of Timoshenko nanobeams

with a nonlocal formulation and meshless method, International Journal of Engineering
Science, Vol. 49, pp. 976-984, 2011.
424.
F. Moleiro, C. M. Mota Soares, C. A. Mota Soares, J.N. Reddy, A layerwise mixed leastsquares finite element model for static analysis of multilayered composite plates,
Computers and Structures, Vol. 89, pp. 1730-1742, 2011
(10.1016/j.compstruc.2010.10.008).
425.
J.N. Reddy, Microstructure-dependent couple stress theories of functionally graded

beams, Journal of the Mechanics and Physics of Solids, Vol. 59, pp. 2382-2399, 2011
(doi:10.1016/j.jmps.2011.06.008).
426.
J.N. Reddy, A general nonlinear third-order theory of functionally graded plates,

International Journal of Aerospace and Lightweight Structures, Vol. 1, No. 1, pp. 1
21, 2011.
Wooram Kim and J.N. Reddy, Nonconventional finite element models for nonlinear
analysis of beams, International Journal of Computational Methods, Vol. 8, No. 3, pp. 349368, 2011.
427.
428.
V. U. Unnikrishnan and J.N. Reddy, Multiscale analysis of the core nanotube in a nanocomposite system, Finite Elements in Analysis and Design, Vol. 49, No. 1, pp. 13-18, 2011
(doi:10.1016/j.finel.2011.08.015).
429.
M. K. Apalak, R. Gunes, M. Aydin, and J.N. Reddy, Impact performance of Al/SiC

functionally graded circular plates, International Journal of Materials and Product
Technology, Vol. 42, Nos. 1-2, pp. 56-65, 2011.
430.
V. P. Vallala, J.N. Reddy, and K.S. Surana, Alternative least-squares finite element
models of navier-stokes equations for power-law fluids, Engineering Computations
International Journal for Computer-Aided Engineering and Software, Vol. 28 No. 7, pp. 828852, 2011 (DOI: 10.1108/02644401111178785). Selected as a Highly Commended paper
at the Literati Network Awards for Excellence 2012.
431.
H. M. Ma, X.-L. Gao, and J.N. Reddy, A Non-classical Mindlin plate model based on a
modified couple stress theory, Acta Mechanica, Vol. 220, pp. 217-235, 2011 (DOI
10.1007/s00707-011-0480-4).
432.
C. M. C. Roque, A. J. M. Ferreira, A. M. A. Neves, C. M. Mota Soares, J.N. Reddy, and R.

M. N. Jorge, Transient analysis of composite and sandwich plates by radial basis
functions, Journal of Sandwich Structures and Materials, Vol. 13, No. 6, pp.681-704, 2011.
433.
C. K. Hui, Y. Y. Lee, J.N. Reddy, Approximate elliptical integral solution for the large
amplitude free vibration of a rectangular single mode plate backed by a multi-acoustic
mode cavity, Thin-Walled Structures, Vol. 49, No. 9, pp. 1191-1194, 2011.
434.
A. J. M. Ferreira, L. M. Castro, C. M. C. Roque, J.N. Reddy, S. Bertoluzza, Buckling

analysis of laminated plates by wavelets, Computers & Structures, Vol. 89, Nos. 78, pp.
626-630, 2011.
55
435.
J.N. Reddy, S. Doshi, and A. Muliana, ``Theoretical formulations for finite element
models of functionally graded beams with piezoelectric layers, Journal of Solid
436.
J.N. Reddy and J. Kim, "A nonlinear modified couple stress-based third-order theory of
functionally graded plates," Composite Structures, Vol. 94, pp. 1128-1143, 2012
(doi:10.1016/j.compstruct.2011.10.006).
437.
S. Mitra, L. V. Hai, K. K. Ang, J.N. Reddy, and B.C. Khoo, A 3-D fully coupled analysis
of nonlinear sloshing and ship motion, Ocean Engineering, Vol. 39, pp. 1-13, 2012
(doi:10.1016/j.oceaneng.2011.09.015).
438.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Finite element model for
nutrient distribution analysis of a hollow fiber membrane bioreactor, International
Journal for Numerical Methods in Biomedical Engineering, Vol. 28, No. 2, pp. 229-238, 2012.
439.
R. Ranjan and J.N. Reddy, On multigrid methods for the solution of least-squares finite
element models of viscous flows, International Journal of Computational Fluid Dynamics,
Vol 26(1), pp. 45-65, 2012.
440.
Md. Ishaquddin, P. Raveendranath, and J.N. Reddy, Flexure and torsion locking
phenomena in out-of-plane deformation of Timoshenko curved beam element, Finite
Elements in Analysis and Design, Vol. 51, pp. 22-30, 2012.
441.
J.N. Reddy and A. Arbind, Bending relationships between the modified couple stressbased functionally graded Timoshenko beams and homogeneous Bernoulli-Euler
beams" Annals of Solid and Structural Mechanics, Vol. 3, No. 1, pp. 15-26, 2012 (DOI:
10.1007/s12356-012-0026-z).
442.
K.S. Surana, D. Nunez, J.N. Reddy, and A. Romkes, Rate constitutive theory for
ordered thermoelastic solids, Annals of Solid Mechanics, Vol. 3, No. 1, pp. 27-54, 2012
(DOI: 10.1007/s12356-012-0027-y).
443.
F. Moleiro, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy, Assessment of a

layerwise mixed least-squares model for analysis of multilayered piezoelectric
composite plates, Computers and Structures, Vol. 108-109, pp. 14-30, 2012.
(http://dx.doi.org/10.1016/j.compstruc.2012.04.002).
444.
V. P. Vallala, G.S. Payette, and J.N. Reddy, Spectral/hp finite element formulation for
viscoelastic beams based on an higher-order beam theory, International Journal of
Applied Mechanics, Vol. 4, No. 1, pp. 1--28, 2012.
445.
G. S. Payette, K. B. Nakshatrala, and J.N. Reddy, On the performance of high-order

finite elements with respect to maximum principles and the nonnegative constraint for
diffusion-type equations, International Journal for Numerical Methods in Engineering, Vol.
91, pp. 742-771, 2012.
446.
J.N. Reddy and Jessica Berry, Modified couple stress theory of axisymmetric bending of
functionally graded circular plates, Composites Structures, Vol. 94, pp. 3664-3668, 2012.
447.
V. Vallala, A. Ruimi, and J.N. Reddy, Nonlinear viscoelastic analysis of orthotropic

beams using a general third-order theory, Composite Structures, Vol. 94, pp. 3759-3768,
2012.
448.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Biomechanics of breast tumor:

effect of collagen and tissue density, International Journal of Mechanics & Materials in
Design, Vol. 8, pp. 257-267, 2012.
56
449.
J. V. Araujo dos Santos and J.N. Reddy, Vibration of Timoshenko beams using nonclassical elasticity theories, Shock and Vibration, Vol. 19, No. 3, pp. 251-256, 2012.
450.
Andre Laulusa and J.N. Reddy, A critical evaluation of various nonlinear beam finite
elements, International Journal of Computational Methods, Vol. 9, No. 4, pp. 2012 (DOI:
10.1142/S0219876212500454 1250045).
V. U. Unnikrishnan and J.N. Reddy, "Multiscale analysis of the core nanotube in a nanocomposite system," Finite Elements in Analysis and Design, Vol. 49, No. 1, pp. 13-18, 2012.
451.
452.
Cesar Y. Kiyono, Emilio C. N. Silva, and J.N. Reddy, Design of laminated

piezocomposite shell transducers with arbitrary fiber orientation using topology
optimization approach, International Journal for Numerical Methods in Engineering, Vol.
90, No. 12, pp. 14521484, 2012.
453.
J. V. Araujo dos Santos and J.N. Reddy, Free vibration and buckling analyses of
Timoshenko beams with couple stress and Poisson's effects," International Journal of
Applied Mechanics (IJAM-D-11-00100), Vol. 4, No. 3, pp. 1250056-1 (28 pages), 2012.
454.
C. M. C. Roque, D. S. Fidalgo, A. J. M. Ferreira, and J.N. Reddy, A study of a

microstructure-dependent composite laminated Timoshenko beam using a modified
couple stress theory and a meshless method, Composite Structures, Vol. 96, pp. 532-537,
2013.
C. M. C. Roque, A. J. M. Ferreira, and J.N. Reddy, Analysis of Mindlin micro plates
with a modified couple stress theory and a meshless method, Applied Mathematical
Modelling, http://dx.doi.org/10.1016/j.apm.2012.09.063, Vol. 37, pp. 46264633, 2013.
455.
456.
A. Srinivasa and J.N. Reddy, A model for a constrained, finitely deforming, elastic solid
with rotation gradient dependent strain energy, and its specialization to von Karman
plates
and
beams,
Journal
of
Physics
and
Mechanics
of
Solids,
http://dx.doi.org/10.1016/j.jmps.2012.10.008, Vol. 61, No. 3, pp. 873885, March 2013.
457.
M. C. Ray and J.N. Reddy, Active damping of laminated cylindrical shells conveying
fluid using 1-3 piezoelectric composites, Composite Structures, Vol. 98, pp. 261-271, 2013.
458.
A. Arbind and J.N. Reddy, Nonlinear analysis of functionally graded microstructuredependent beams, Composite Structures, Vol. 98, pp. 272-281, 2013.
P. Ghosh, J.N. Reddy, and A. R. Srinivasa, Development and implementation of a
beam theory model for shape memory polymers, International Journal of Solids and
Structures, Vol. 50, Nos. 3-4, pp. 595-608, February 2013.
K.S. Surana, Y. Mendoza, and J,. N. Reddy, Constitutive theories for thermoelastic
solids in Lagrangian description using Gibbs potential, Acta Meccanica, Vol. 224, No. 5,
pp. 1019-1044, 2013 (DOI 10.1007/s00707-013-0805-6).
459.
460.
461.
K.S. Surana, D. Nunez, J.N. Reddy, and A. Romkes, Rate constitutive theories for
ordered thermofluids, Continuum Mechanics and Thermodynamics (CMAT-D-11-00041),
Vol. 25, No. 5, pp. 625-662, 2013.
462.
M. imek and J.N. Reddy, Bending and vibration of functionally graded microbeams
using a new higher order beam theory and the modified couple stress theory,
International Journal of Engineering Science, Vol. 64, pp. 37-53, 2013.
463.
Anuj Chaudhry, Ginu Unnikrishnan, J.N. Reddy, Thomas A. Krouskop, Raffaella

Righetti1, Effect of permeability on the performance of elastographic imaging
techniques, IEEE Transactions on Medical Imaging, Vol. 32, No. 2, pp. 189-199, 2013 (doi:
10.1109/TMI.2012.2219317).
57
464.
Md. Ishaquddin, P. Raveendranath, and J.N. Reddy, Coupled polynomial field

approach for elimination of flexure and torsion locking phenomena in the timoshenko
and eulerbernoulli curved beam elements, Finite Elements in Analysis and Design, Vol.
65, pp. 17-31, 2013.
465.
G. S. Payette and J.N. Reddy A nonlinear finite element framework for viscoelastic
beams based on the highorder Reddy beam theory, Journal of Engineering Materials
and Technology, Vol. 135, No. 1, pp. 011005-1 to 011005-11, 2013.
466.
M. imek and J.N. Reddy, A unified higher order beam theory for buckling of a
functionally graded microbeam embedded in elastic medium using modified couple
stress theory, Composite Structures, Vol. 101, pp. 47-58, 2013.
(http://dx.doi.org/10.1016/j.compstruct.2013.01.017).
467.
J. Kim and J.N. Reddy, Analytical solutions for bending, vibration, and buckling of
FGM plates using a couple stress-based third-order theory, Composite Structures, Vol.
103, pp. 8698, 2013 (http://dx.doi.org/10.1016/j.compstruct.2013.03.007).
468.
B. Mirzavand, M. R. Eslami, and J.N. Reddy, Dynamic thermal postbuckling analysis of

shear deformable piezoelectric-fgm cylindrical shells, Journal of Thermal Stresses, Vol. 36,
No. 3, pp. 189-206, 2013.
469.
Jian-Feng Wen, Shan-Tung Tu, Xin-Lin Gao, J.N. Reddy, Simulations of creep crack
growth in 316 stainless steel using a novel creep-damage model, Engineering Fracture
Mechanics, Vol. 98, pp. 169-184, 2013.
470.
V. U. Unnikrishnan, G.U. Unnikrishnan, J.N. Reddy, and F. Rostam-Abadi, Multiscale

Analysis of Impact Mitigation in Soft Tissues using Nanotube Reinforced Composites,"
International Journal of Mechanics and Materials in Design, Vol. 9, No. 2, pp. 181189, 2013.
471.
X.-L. Gao, J. X. Huang, and J.N. Reddy, A non-classical third-order shear deformation
plate model based on a modified couple stress theory, Acta Meccanica, Vol. 224, No. 11,
pp. 26992718, 2013.
472.
K.S. Surana, T. Moody, and J.N. Reddy, Ordered Rate Constitutive Theories in
Lagrangian Description for Thermoviscoelastic Solids without Memory, Acta Meccanica,
Vol. 224, No. 11, pp. 27852816, 2013.
473.
J.N. Reddy and Patrick Mahaffey, Generalized Beam Theories Accounting for von
Karman Nonlinear Strains with Application to Buckling and Post-Buckling, Journal of
Coupled Systems and Multiscale Dynamics, Vol. 1, No.1, pp. 120-134, 2013.
Francesco Tornabene and J.N. Reddy, "FGM and Laminated Doubly-Curved and
Degenerate Shells Resting on Nonlinear Elastic Foundations: A GDQ Solution for Static
Analysis with a Posteriori Stress and Strain Recovery," Special Issue On "High
Performance Advanced Composites," Journal of the Indian Institute of Science, Vol. 93, No.
4, pp. 635-688, 2013.
474.
475.
M. Komijani, J.N. Reddy, M. R. Eslami, and M. Bateni, An analytical approach for

thermal stability analysis of two-layer Timoshenko beams, International Journal of
Structural Stability and Dynamics, Vol. 13, No. 8, pp. 1350036-1 to 1350036-14, 2013.
476.
Jayavel Arumugam, A. R. Srinivasa, and J.N. Reddy, A thermodynamic model for ionic
polymer-metal composites and finite volume-finite element solution, Composite
Structures, Vol. 106, pp. 461469, 2013.
58
477.
J. N. Reddy, V.U. Unnikrishnan, and G.U. Unnikrishnan, Recent advances in the

analysis of nanotube reinforced polymeric biomaterials, Journal of the Mechanical
Behavior of Materials, Vol. 22 (5-6), pp. 137148, 2013.
478.
A. Arbind, J.N. Reddy, and A. Srinivasa, Modified couple stress-based third-order

theory for nonlinear analysis of functionally graded beams, Latin American Journal of
Solids and Structures, Vol 11, No 3, pp. 459487, 2014.
479.
Mohammad Ebrahim Torkia, Mohammad Taghi Kazemib, J.N. Reddy, Hassan

Haddadpoud, and Saeid Mahmoudkhani, Dynamic stability of functionally graded
cantilever cylindrical shells under distributed axial follower forces, Journal of Sound and
Vibration, Vol. 333, pp. 801-817, 2014.
480.
Francesco Tornabene, Nicholas Fantuzzi, Erasmo Viola, and J.N. Reddy, Winklerpasternak foundation effect on the static and dynamic analyses of laminated doublycurved and degenerate shells and panels, Composites, Part B: Engineering, Vol. 57, pp.
269-296, 2014.
481.
J.-F. Wen, S.-T. Tu, X.-L. Gao, and J.N. Reddy, New model for creep damage analysis
and its application to creep crack growth simulations, Materials Science and Technology,
Vol. 30, No.1, pp. 32-37, 2014.
482.
K.S. Surana, M. Powell, and J.N. Reddy, A simple mixture theory for n newtonian
and generalized Newtonian constituents, Continuum Mechanics and Thermodynamics,
Vol. 26, pp. 3365, 2014.
483.
M. Komijani, J.N. Reddy, and R. Eslami, Nonlinear analysis of microstructuredependent functionally graded piezoelectric material actuators, Journal of Mechanics
and Physics of Solids, Vol. 63, pp. 214227, 2014.
R. Gunes, M. K. Apalak, and J.N. Reddy, "Experimental and numerical investigations of
low velocity impact on functionally graded circular plates," Composites Part B, Vol. 59,
pp. 2132, 2014.
484.
Manuscripts Accepted (in press)

485.
K.S. Surana, D. Nunez, J.N. Reddy, and A. Romkes, Theory of rate constitutive
equations for ordered thermoviscoelastic fluids: polymers, Continuum Mechanics and
Thermodynamics, in press (published onine in 2013).
486.
K.S. Surana, T. Moody, and J.N. Reddy, Rate constitutive theories of order zero in
Lagrangian description for thermoelastic solids, Mechanics of Advanced Materials and
Structures, in press.
487.
V. P.Vallala, R. Sadr, and J.N. Reddy, Higher-order spectral/hp finite element models
of the Navier-Stokes equations, Journal of Computational Fluid Dynamics, in press.
488.
G. S. Payette and J.N. Reddy, A robust general locking-free shell element for large
deformation analysis of FGM and composite structures, Computer Methods in Applied
Mechanics and Engineering, in press.
489.
K.S. Surana, D. Nunez, and J.N. Reddy, Giesekus constitutive model for
thermoviscoelastic fluids based on ordered rate constitutive theories, Journal of Research
Updates in Polymer Science, accepted for publication.
490.
M. Komijan, J.N. Reddy, and A. Ferreira, Nonlinear stability and vibration of pre/postbuckled FGPM actuators, Meccanica, to appear (published online in November 2013).
59
491.
F. Cheng, L. Hu, J.N. Reddy, I. Karaman, E. Hoffman, and M. Radovic, Temperaturedependent thermal properties of a shape memory alloy/max phase composite:
experiments and modeling, Acta Materialia, to appear.
492.
M. Komijani, S.E. Esfahani, J.N. Reddy, Yiping Liu, and M.R. Eslami, Nonlinear
thermal stability and vibration of pre/post-buckled temperature- and
microstructuredependent FGM beams resting on elastic foundation, Composite
Structures, in press.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Biomechanical analysis of
myometrium: effect of scarring and parturition, Journal of Connective Tissue Research, in
review.
493.
494.
Luis MS Castro, J.N. Reddy, Silvia Bertoluzza, and A.J.M. Ferreira, A wavelet
collocation method for the static and vibration analysis of laminated composite plates
using a higher-order theory, Composite Structures, in review.
495.
Md. Ishaquddin, P. Raveendranath, and J.N. Reddy, Locking-free curved beam finite
element models based on coupled displacement fields for out-of-plane free vibration
analysis, Computers and Structures, in review.
496.
R. Ranjan, Y. Feng, and J.N. Reddy Stabilized formulations for solving incompressible
flow problems, International Journal for Numrical Methods in Fluids, in review.
497.
Nol Challamel, Zhen Zhang, C. M. Wang, and J.N. Reddy, On non-conservativeness of

Eringens nonlocal elasticity in beam mechanics, Archives of Applied Mechanics, in press.
498.
Kiran Sahu, Jukka Tuhkuri, and J.N. Reddy, `Àctive attenuation of sound transmission
through a soft-cored sandwich panel into acoustic enclosure using volume velocity
cancellation, Journal of Sound & Vibration, in review.
60
SEMINARS AND PAPERS PRESENTED AT CONFERENCES

1.
A General Treatment of Complementary Variational Principles in Mathematical

Physics, Seminar on Approximations in Nonlinear Mechanics, University of Alabama in
Huntsville, January 1972.
2.
Mixed Finite Element Approximations for Nonlinear Boundary Value Problems by the
Method of Conjugate Projections, (with J. T. Oden) 1972 SIAM Fall Meeting, Austin,
Texas, October 1972.
3.
Accuracy and Convergence of Mixed Finite Element Approximations of Thin Bars,

Membranes and Plates on Elastic Foundation, Proc. of the Fourth Southwestern Graduate
Research Conference in Applied Mechanics, Paper 1B.5, 1973.
4.
Some Mathematical Properties of Certain Mixed Galerkin Approximations in

Nonlinear Elasticity, Computational Methods in Nonlinear Mechanics, J. T. Oden et al. (ed.),
University of Texas at Austin, Austin, pp. 627-635, October 1974.
5.
Mathematical Consideration of Mixed Finite Element Approximations in Mechanics,

Solid Mechanics Seminar Series, Division of Engineering, Brown University, Providence,
Rhode Island, February 4, 1974.
6.
Consistency, Stability and Convergence of Mixed Finite Element Approximations,

TICOM Seminar, Texas Institute for Computational Mechanics, The University of Texas
at Austin, March 14, 1974.
7.
Dual Complementary Variational Principles in Mechanics, Seminar, School of

Aerospace, Mechanical and Nuclear Engineering, University of Oklahoma, Norman,
July 25, 1974.
8.
A Finite Element Solution of Nonlinear PDE's in the Hydrodynamics of Hypervelocity

Impact, Advances in Computer Methods for Partial Differential Equations, R.
Vichnevetsky (ed.), Rutgers University, pp. 220-224, 1975.
9.
On Mixed Hybrid Finite Element Approximations of the Biharmonic Equation, SIAMSIGNUM 1975 Fall Meeting, San Francisco, Dec. 3-5, 1975.
10.
Some Computational Aspects of Mixed Finite Element Approximations, Proceedings,

12th Annual Meeting of the Society of Engineering Science, University of Texas, Austin, pp.
965-980, October 1975.
11.
On Hydrodynamics of Hypervelocity Impact by the Finite Element Method, ASCE

National Structural Engineering Convention, New Orleans, April 14-18, 1975, Meeting
Preprint No. 2417.
12.
On Mixed Finite Element Approximations in Continuum Mechanics: Theory and

Practice, The 14th International Union of Theoretical and Applied Mechanics, Delft, The
Netherlands, Aug. 30-Sept. 4, 1976.
13.
A Finite Element Formulation of High-Velocity Impact, Proceedings of the

AIAA/ASME/SAE 17th Structures, Structural Dynamics and Materials Conference, King of
Prussia, Pennsylvania, May 5-7, pp. 313-323, 1976.
14.
Alternate Finite Element Formulation of Incompressible Fluid Flow with Application to

Geological Folding" (with K. H. Patil), Applications of Computer Methods in Engineering,
Vol. I, L. C. Wellford, Jr. (ed.), University of Southern California, Los Angeles, pp. 179190, 1977.
61
15.
Numerical Solution of Linear Integral Equations by the Finite Element Method" (with
V. D. Murty), 15th Midwestern Mechanics Conference, Chicago, IL, March 23-25, 1977.
16.
Dynamic Response of a Geometrically Nonlinear Composite Elastic-Viscoelastic

Cylinder" (with A. K. Neighbors and T. L. Cost), CANCAM 77, Vancouver, B.C., May 30June 3, 1977.
17.
Stability of Thin Rectangular Plates Using a Simplified Finite Element" (with ChenShyh Tsay), 15th Midwestern Mechanics Conference, Chicago, IL, March 23-25, 1977.
18.
Mixed Rectangular Finite Elements for Plate Bending" (with C. S. Tsay), Proceedings of
the Oklahoma Academy of Science, Vol. 57, pp. 144-148, 1977.
19.
Large Deflection and Large Amplitude Free Vibrations of Thin Rectangular Plates
Using Mixed Isoparametric Elements" (with J. D. Stricklin), Applications of Computer
Methods in Engineering, Vol. II, L. C. Wellford, Jr. (ed.), University of Southern California,
Los Angeles, pp. 1323-1335, 1977.
20.
Free Vibration of Thin Rectangular Plates by a Mixed Finite Element" (with C. S. Tsay),
Sixth ASME Mechanical Vibrations Conference, Chicago, Illinois, Sept. 26-28, 1977, ASME
Paper No. 77-DET-143.
21.
Mathematical Theory of Mixed and Penalty Finite Element Methods Applied to Thin
Elastic Plates and Incompressible Fluid Flow Problems, Seminar, Institute of
Mathematics, University of Rome, Italy, November, 1977.
22.
Mixed Finite Elements in Bending, Stability, and Vibration of Thin Plates, Seminar,
Institute of Structural Engineering, Univ. of Rome, Italy, Nov., 1977.
23.
Theory of Finite Elements, a series of lectures delivered to the Department of

Structures, University of Calabria, Cosenza, Italy, November, 1977.
24.
Design of Stable Numerical Schemes in Atmospheric Models, presented at the Joint

IUTAM/IUGG Symposium on Monsoon Dynamics, December 5-9, 1977, New Delhi, India.
25.
The Finite Element Method in Engineering Science and Mechanics, Mathematics

Colloquium, Oklahoma State University, Stillwater, 1978.
26.
Primitive Variable Finite Element Formulations of Incompressible Fluid Flow: Theory

and Application" (with K. H. Patil), Developments in Theoretical and Applied Mechanics
(proceedings of Ninth SECTAM) Vanderbilt University, Nashville, pp. 113-123, 1978.
27.
On the Finite Element Method with Penalty for Incompressible Fluid Flow Problems,
Proceedings of MAFELAP (The Mathematics of Finite Elements and Applications III J. R.
Whiteman (ed.), Academic Press, London, pp. 227-235, 1979), Brunel University,
Uxbridge England, April 1978.
28.
Penalty Velocity-Stream Function Finite Element Models for Free Convection Heat
Transfer Problems" (with D. R. Mamidi), Recent Advances in Engineering Science, R. L.
Sierakowski (ed.), University of Florida, Gainesville, pp. 381-386, 1978.
29.
Simple Finite Elements with Relaxed Continuity for Nonlinear Analysis of Plates,
Finite Element Methods in Engineering (Proc. 3rd Int. Conference in Australia on Finite
Element Methods), A. P. Kabaila and V. A. Pulmano (eds.), The University of New South
Wales, Sydney, pp. 265-281, 1979.
62
30.
Penalty Finite Element Methods for the Solution of Advection and Free Convection
Flows, Finite Element Methods in Engineering, (Proc. 3rd Int. Conference in Australia on
Finite Element Methods), A. P. Kabaila and V. A. Pulmano (eds.), The University of New
South Wales, Sydney, pp. 583-598, 1979.
31.
Mathematics of Finite Elements, a series of lectures delivered at Tata Institute of

Fundamental Research, Bangalore (on the campus of the Indian Institute of Science), July
1979.
32.
On the Existence and Accuracy of Solutions to Penalty Finite Element Models of

Viscous Incompressible Flows, paper presented at the l6th Annual Meeting of the Society
of Engineering Science, Northwestern University, Evanston, Sept. 5-6, 1979.
33.
Penalty-Finite Elements for Nonlinear Problems with Linear Equality Constraints,

invited by the Mathematical Methods Committee of the Third ASCE/EMD Specialty
Conference, University of Texas, Austin, Texas, Sept. 17-19, 1979.
34.
A Penalty Finite Element for Nonlinear Analysis of Thin and Moderately Thick Plates,
Developments in Mechanics, Vol. 10 (Proceedings of the 16th Midwestern Mechanics
Conference), S. C. Sinha, et al. (eds.), Kansas State University, Manhattan, Sept. 19-21,
pp. 213-217, 1979.
35.
Finite Element Analysis of Free Convection in Enclosures, Seminar on Numerical

Methods in Engineering, Wichita State University, Wichita, Kansas, October 1979.
36.
Analysis of Plates Constructed of Fiber Reinforced Bimodulus Materials, (with C. W.

Bert), Mechanics of Bimodulus Composite Materials, session at the Winter Annual Meeting
of ASME, New York City, New York, December 2-7, 1979. Mechanics of Bimodulus
Materials (edited by C. W. Bert), ASME AMD Vol. 33, pp. 67-83, 1979. Appeared in
Mechanics of Bimodulus Materials (edited by C. W. Bert), ASME AMD Vol. 33, pp. 67-83,
1979.
37.
A Comparison of Closed-Form and Finite-Element Solutions of Layered Composite

Plates, Seminar, Department of Engineering Science and Mechanics, Virginia
Polytechnic Institute and State University, Blacksburg, VA, February, 1980.
38.
The Finite Element Analysis of Thick Laminated Anisotropic Rectangular Plates, Solid
Mechanics Seminar, Department of Applied Mechanics and Engineering Sciences,
University of California, San Diego, May, 1980.
39.
Analysis of Thick Rectangular Plates Laminated of Bimodulus Composite Material"

(with C. W. Bert, V. S. Reddy, and W. C. Chao), AIAA/ASME/ASCE and AHS 21st
Structures, Structural Dynamics and Materials Conference, Seattle, May 12-14, 1980.
40.
On the Mathematical Theory of Penalty-Finite Elements for Navier-Stokes Equations,

Third Int. Conf. on Finite Elements in Flow Problems, Banff, Alberta, Canada, June 10-13, pp.
146-154, 1980.
41.
A Finite Element Approach to Combined Conductive and Radiative Heat Transfer in a

Planar Medium" (with R. Fernandes and J. Francis), 15th AIAA Thermophysics Conference,
July 14-16, 1980, Snowmass, Colorado.
42.
Large Deflection and Large Amplitude Free Vibrations of Laminated CompositeMaterial Rectangular Plates" (with W. C. Chao), Symposium on Computational Methods in
Nonlinear Structural and Solid Mechanics, George Washington Unviversity, October 6-8,
pp. 371-376, 1980.
63
43.
On the Development of a Shear Deformable Finite Element for the Analysis of Layered
Composite Plates and Shells, 17th Annual Meeting of the Society of Engineering Science,
December 10-12, 1980, Georgia Institute of Technology, Atlanta.
44.
Thermal Bending of Thick Rectangular Plates of Bimodulus Composite Materials" (with

C. W. Bert et al.), 17th Annual Meeting of the Society of Engineering Science, December 1012, 1980, Georgia Institute of Technology, Atlanta.
45.
The Finite Element Method in Incompressible Fluid Flow, lectures delivered at a short
course, Advances in Computational Fluid Dynamics, The University of Tennessee Space
Institute, TN, December, 1980.
46.
Numerical Solution of Three-Dimensional Navier-Stokes Equations by a Penalty

Function Formulation, Seventeenth Midwestern Mechanics Conference, May 6-8, 1981, The
University of Michigan, Ann Arbor, Michigan.
47.
Bending and Free Vibration of Thick Beams Made of Bimodulus Materials, (with C.
W. Bert and A. D. Tran) Seventeenth Midwestern Mechanics Conference, University of
Michigan, Ann Arbor, MI, May 6-8, 1981.
48.
A Finite-Element Analysis of Bimodulus Composite Plates and Shells, Proc. IX th

International Congress on the Application of Mathematics in Engineering, June 28-July 5, 1981,
Weimar, DDR (East Germany), pp. 30-34, 198l.
49.
The Finite Element Method in the Analysis of Incompressible Fluid Flows, Seminar,
Bhabha Atomic Research Center, Bombay, India, June 30, 1981.
50.
Finite-Element Analysis of Three-Dimensional Navier-Stokes Equations by the Penalty

Function Method, Seminar, Department of Chemical Engineering, University of Naples,
Italy, July 2, 1981.
51.
On the Nonlinear Analysis of Layered Composite-Plates: A Review of Recent

Advances, Seminar, Department of Structures, University of Calabria, Cosenza, Italy,
July 4, 1981.
52.
On Thermal Bending of Layered Composite Plates and Shells of Bimodulus Materials"

(with C. W. Bert and Y. S. Hsu), Numerical Methods in Thermal Problems, Vol. II, R. W.
Lewis, et al. (eds.), Pineridge Press, Swansea, U.K., 1981, pp. 384-395 (paper presented at
the Second Int. Conf. Numer. Meth. in Thermal Problems, July 7-10, 1981, Venice, Italy).
53.
On the Finite-Element Analysis of Ordinary and Bimodulus-Material Plates and

Shells, Seminar, The International Center for Mechanical Sciences, Udine, Italy, July 9,
1981.
54.
Natural Convection Between Concentric (Horizontal) Circular Cylinders by a PenaltyFinite Element Method, (with A. Satake), Numerical Methods in Laminar and Turbulent
Flow, C. Taylor and B. A. Shrefler (eds.), Pineridge Press, Swansea, U.K., 1981, pp. 969980 (paper presented at the Second Int. Conf. in Numer. Meth. in Laminar and Turbulent
Flows, July 10-13, 1981, Venice, Italy.)
55.
Large-Deflection Vibration of Cross-Ply Laminated Rectangular Plates with Certain

Edge Conditions, (with W. C. Chao), 18th Annual Meeting of the Society of Engineering
Science, September 2-4, 1981, Brown University, RI.
56.
Nonlinear Vibration of Layered Composite Plates Including Transverse Shear and

Rotatory Inertia, 1981 (ASME) Vibration Conference, September 20-23, 1981, Hartford,
Connecticut ASME Paper No. 81-DET-144.
64
57.
Large Deflection Analysis of Thick, Orthotropic, Axisymmetric Annular Plates,

presented at ASME Winter Annual Meeting, November 15-20, 1981, Washington, D.C.,
ASME Paper No. 81-WAM/DE-3.
58.
Nonlinear Oscillations of Laminated, Anisotropic, Thick Rectangular Plates, (with W.

C. Chao), Symposium on Structures and Materials II: Impact and Vibrations of Composites and
Structures, ASME Winter Annual Meeting, November 15-20, 1981, Washington, D.C.;
Advances in Aerospace Structures and Materials, AD-01, pp. 115-125, 1981.
59.
A Finite-Element Analysis of Large-Deflection Bending of Laminated Anisotropic

Shells, Symposium on Nonlinear Finite-Element Analysis of Shells, 1981 ASME Winter
Annual Meeting, November 15-20, 1981, Washington, D.C.; Nonlinear Finite Element
Analysis of Plates and Shells, AMD-Vol. 48, pp. 249-264, 1981.
60.
Vibration and Buckling of Thick Cylindrical Shells of Bimodulus Composite Materials,

(with C. W. Bert), Symposium on Structures and Materials II: Impact and Vibrations of
Composites and Structures, ASME Winter Annual Meeting, November 15-20, 1981,
Washington, D.C.; Advances in Aerospace Structures and Materials, AD-01, pp. 109-114,
1981.
61.
Nonlinear Transient Analysis of Composite Plates, Seminar, Department of Mechanical

Engineering, Texas A&M University, College Station, Texas, January 29, 1982.
62.
Analysis of Bimodular-Material Composite Plates, Solid Mechanics Seminar, Division of

Applied Mechanics, Stanford University, Stanford, CA, Feb. 4, 1982.
63.
Finite Element Simulation of Three-Dimensional Viscous Incompressible Fluid Flows"

Fluid Mechanics Seminar, Department of Aeronautics and Astronautics, Stanford
University, Stanford, CA, Feb. 2, 1982.
64.
Finite Element Applications to Incompressible 3D Fluid Flow Problems, Seminar in the

Joint Inst. for Aeronaut. and Acoust., Stanford University, Feb. 1, 1982.
65.
Nonlinear Vibration of Rectangular Composite Plates with Rectangular Cutouts, Proc.

Eleventh Southeastern Conference on Theoretical and Applied Mechanics, April 8-9, 1982,
Developments in Theoretical and Applied Mechanics, T. J. Chung and G. R. Karr (eds.),
University of Alabama in Huntsville, pp. 329-240, 1982.
66.
A Penalty-Finite Element with Variable Penalty Parameter for Incompressible Fluid

Flow, Eleventh Southeastern Conference on Theoretical and Applied Mechanics, April 8-9,
1982, University of Alabama in Huntsville, Alabama.
67.
Computational Aspects of the Large Deformation Dynamic Response of Structures

Subjected to Intense Impulsive Loading, ARO Workshop on Computational Aspects of
Penetration Mechanics, Ballistic Research Laboratory, Aberdeen Proving Ground,
Maryland, 27-29 April, 1982.
68.
Finite-Element Analysis of Bimodular Composite Plates, Symposium on Finite Element

Methods and Their Applications, International Congress on Technology and Technology
Exchange, 3-6 May 1982, Pittsburgh(PA).
69.
Mechanics of Bimodular Composite Structures, (with C. W. Bert) in Mechanics of

Composite Materials: Recent Advances, Z. Hashin and C. T. Herakovich (eds.), Pergamon
Press, pp. 323-337, 1983 (Proc. IUTAM Symp. held at Virginia Polytechnic Institute, June
1982).
65
70.
Transient Analysis of Layered Composite Plates Using a Shear Deformation Theory,

(with D. J. Mook) Computational Methods and Experimental Measurements, G. A. Keramidas
and C. A. Brebbia (eds.), Springer-Verlag, Berlin, pp. 737-748, June 30-July 2, 1982,
Washington, D. C.
71.
Finite-Element Simulation of Natural Convection in Three-Dimensionl Enclosures,

AIAA/ASME Fluid, Plasma, Thermophysics, and Heat Transfer Conference, June 7-9, 1982, St.
Louis, Mo., ASME Paper No. 82-HT-71.
72.
Finite-Element Analysis of Three Dimensional Incompressible Flows by Penalty

Function Methods, Fourth International Symposium on Finite Element Methods in Flow
Problems, July 26-29, 1982, Tokyo, Japan.
73.
On Penalty Function Finite Element Models for the Analysis of Three-Dimensional

Flows, 10th IMACS World Congress on Systems Simulation and Scientific Computation,
August 8-13, 1982, Montreal, Canada.
74.
Nonlinear Transient Response of Layered Composite Plates, International Conference on

Finite Element Methods, August 2-6, 1982, Shanghai, Peoples' Republic of China.
75.
Nonlinear Transient Analysis of Composite Plates, Mechanics of Composites Review, The

Materials Laboratory, Wright-Patterson Air Force Base, October 5-7, 1982.
76.
Computational Strategy for Nonlinear Analysis of Bimodular-Material Structures,

ASCE National Convention, New Orleans, October 25-29, 1982.
77.
Forced Motions of Anisotropic Composite Plates, Dynamics of Composite Materials,

session at the 19th Annual Meeting of the Society of Engineering Science, University of
Missouri-Rolla, October 27-29, 1982.
78.
On an Isoparametric Finite Difference Energy Method and a Five-Node Finite Element

for the Solution of Fluid Flow Problems, (with R. Tam), 19th Annual Meeting of the
Society of Engineering Science, October 27-29, 1982, University of Missouri-Rolla, Rolla.
79.
Large Deflection Bending of Laminated Shells, (with W. C. Chao), 19th Annual Meeting
of the Society of Engineering Science, October 27-29, 1982, University of Missouri-Rolla,
Rolla.
80.
Geometrically Nonlinear Analysis of Layered Composite Shells, (with W. C. Chao),

Advances in Aerospace Structures and Materials, AD-03, pp. 25-28, 1982 Winter Annual
Meeting of ASME, Phoenix, Arizona, Nov. 14-19, 1982.
81.
Three-Dimensional Finite-Element Analysis of Layered Composite Plates, (with N. S.

Putcha), Advances in Aerospace Structures and Materials, AD-03, pp, 29-35, 1982 Winter
Annual Meeting of ASME, Phoenix, Arizona, Nov. 14-19, 1982.
82.
Penalty Function Methods in Mechanics: A Review of Recent Advances, Penalty Finite

Element Methods in Mechanics, AMD-Vol. 51 pp. 1-20, 1982, The American Society of
Mechanical Engineers, New York.
83.
Nonlinear Analysis of Layered Composite Plates, Proceedings of FEMSA-83

International Symposium on Design and the Finite Element Method, University of Cape
Town, Jan. 10-12, 1983.
84.
Four lectures on The Techniques and Formulations in Finite Element Analysis of

Composite Structures and Fluid Dynamics, National Research Institute for Mathematical
Sciences, Council for Scientific and Industrial Research, Pretoria, South Africa, Jan. 17-21,
1983.
66
85.
Application of Penalty Function-Finite Elements to Problems in Fluids and Solids,

Mechanical and Aerospace Engineering Department, West Virginia University, April, 1983.
86.
A Shear Deformable Shell Element for Laminated Composites, (with W. C. Chao)

Proceedings of the NASA Lewis/University/Industry Workshop on Nonlinear Analyses for
Engine Structures, NASA Lewis Research Center, April 19-20, 1983.
87.
On a Refined Theory of Plates, Seminar, Department of Mechanical Engineering, The

City College of the City University of New York, New York, May 1984.
88.
On Exact Solutions of Cross-Ply Laminated Thick Shells, Proc. of the l8th Midwestern
Mechanics Conference, University of Iowa, Iowa City, May 16-18, 1983.
89.
Dynamic Response of Layered Anisotropic Composite Plates by a 3-D Element, (with

N. S. Putcha) ASCE/EMD Speciality Conference, May 23-25, 1983, Purdue University,
West Lafayette, Indiana.
90.
A Unilateral Contact Approach to Debonding in Layered Composite Plates, (with

A.Grimaldi), Second U.S.-Japan Conference on Composite Materials, June 6-8, 1983, NASA
Langley Research Center, Hampton, Virginia.
91.
Mechanical Behavior of Bimodular-Material Composite Plates Under Dynamic Loads,

Ninth U.S. National Congress of Applied Mechanics, June 21-25, 1983, Cornell University,
Ithaca, New York.
92.
Elastic-Plastic and Nonlinearly-Elastic Analysis of Laminated Composites, (with T.

Kuppusamy) Int. Symposium on Current Theories of Plasticity and Their Applications,
University of Oklahoma, Norman, July 30-August 3, l984.
93.
A Unilateral-Contact Approach to Delamination in Plates, (with A. Grimaldi) Proc.

Fourth International Conference on Mathematical Modelling, Zurich, Switzerland, August 1517, 1983.
94.
On Delamination in Plates: A Unilateral Contact Approach, (with A. Grimaldi),

Proceedings of the Second Meeting on Unilateral Problems in Structural Analysis, Ravello,
Italy, September 22-24, 1983.
95.
Large Deformation Analysis of Layered Composite Shells, (with W. C. Chao),

Mechanics of Composite Materials and Structures, AMD-Vol. 58, pp. 19-31, Winter Annual
Meeting of ASME, November 15-18, 1983, Boston.
96.
A Mixed Shell Finite Element for Laminated Composites, (with N. S. Putcha, Advances
in Aerospace Structures, Materials and Dynamics, AD-06, pp. 31-39, Winter Annual Meeting
of ASME, November 15-18, 1983, Boston.
97.
An Accurate Prediction of Natural Frequencies of Laminated Plates by a Higher-Order

Theory, Advances in Aerospace Structures, Materials and Dynamics, AD-06, pp. 157-162,
Winter Annual Meeting of ASME, November 15-18, 1983, Boston.
98.
Influence of Rotatory Inertia and Transverse Shear Deformation on Flexural Vibration

of Plates, (with N. D. Phan) 12th Southeastern Conf. on Theoret. and Appl. Mech., Callaway
Gardens, GA, May 10-11, 1984.
99.
On Extensions of Hencky-Kromm Theories of Plates, 12th Southeastern Conf. on Theoret.

and Appl. Mech., Callaway Gardens, GA (hosted by Auburn University), May 10-11, 1984.
100.
On the Numerical Study of Non-Newtonian Fluids in Two-Dimensional Enclosures,

(with D. G. Baird), 12th Southeastern Conference on Theoretical and Applied Mechanics,
Callaway Gardens, GA (hosted by Auburn University), May 10-11, 1984.
67
101.
Numerical Experiments with the Five-Node Rectangular Element in the Analysis of

Incompressible Fluids, 1984 ASCE Spring Convention, May 14-16, 1984, Atlanta, GA.
102.
A Refined Shear Deformation Theory for Laminated Anisotropic Plates, Second Army
Conference on Applied Mathematics and Computing, Rensselaer Polytechnic Institute, Troy,
New York, May 22-25, l984.
103.
Dynamic Analysis of Laminated Plates Using a Higher-Order Theory, (with N. D.

Phan) 25th Structures, Structural Dynamics and Materials Conference, Palm Springs, CA,
May l4-l6, l984, pp. 20l-205.
104.
A Refined Higher-Order Theory of Laminated Composite Shells, 1984 ASCE-EMD

Specialty Conference, University of Wyoming, August 1984.
105.
Elastic-Plastic and Nonlinearly-Elastic Analysis of Laminated Composites, (with T.

Kuppusamy) Int. Symp. on Current Theories of Plasticity and Their Applications, University
of Oklahoma, Norman, OK, July 30 - Aug. 3, l984.
106.
A Refined Transverse Shear Deformation Theory for Laminated Anisotropic Plates,

Mechanical Engineering Seminar, Yale University, New Haven, Connecticut, September
1984.
107.
A Refined Shear Deformation Theory for Laminated Composite Plates, Seminar,

Department of Mechanical Engineering, Florida State University, Tallahassee, FL,
September, 1984.
108.
Nonlinear Material Models for Laminated Composite Plates and Shells, (with K.
Chandrashekhara) 21st Annual Meeting of the Soc. of Engng. Sci., VPI&SU, Blacksburg,
Oct. 15-17, 1984.
109.
A Refined Shear Deformation Theory for Laminated Shells, (with C. F. Liu) 21st
Annual Mtg. of the Soc. of Engng. Sci., VPI&SU, Blacksburg, Oct. 15-17, 1984.
110.
Free Edge Stress Reduction in a Capped Laminate, (with P. R. Heyliger) 21st Annual
Mtg. of the Soc. of Engng. Sci., VPI&SU, Blacksburg, Oct. 15-17, 1984.
111.
On Dynamics of Laminated Anisotropic Plates Using a Refined Mixed Plate Element,

(with N. S. Putcha), Dynamics and Vibrations, 1984 ASME Winter Annual Meeting, New
Orleans, Dec. 1984.
112.
On Modeling of Delamination in Laminated Plates, (with A. Grimaldi and D.

Frederick), Advances in Fracture Research, Vol. 4, edited by S. R. Valluri, et al., ( Proc. of the
Sixth Int. Conf. on Fracture, New Delhi, India, Dec. 4-l0, l984), pp. 2923-293l.
113.
On Mixed and Displacement Finite Element Models of a Refined Shear Deformation

Theory for Laminated Anisotropic Plates, Proc. Fourth International Conference on Applied
Numerical Modeling, National Cheng Kung University, Tainan, Taiwan, Dec. 27-29, l984,
pp. 64-72, l984.
114.
The Finite Element Method -- A Child of the Computer Age, Seminar, Wright State
University, Dayton, Ohio, March 1985.
115.
The Finite Element Method in Engineering Science, Seminar, Chemical and

Metallurgial Engineering Department, University of Nevada, Reno, March 1985.
116.
Computational Models of Contact Stress Problems, ONR Workshop on Computational

Methods and Shell Structures, Stanford University, Stanford, CA, March 26-27, l985.
68
117.
Penalty Function Method in the Finite-Element Analysis of Problems in Mechanics,

Seminar, Department of Mechanical Engineering, Auburn University, Auburn, Alabama,
April 1985.
118.
Computational Solid Mechanics: Global/Local Analysis, Seminar, George Washington

University on NASA Langley Research Center, Hampton, VA, May 1985.
119.
On the Solvability and Computational Aspects of a Higher-Order Shear Deformation

Theory of Plates, Third Army Conference on Applied Mathematics and Computing, Georgia
Institute of Technology, Atlanta, GA, May l3-l6, l985.
120.
Analysis of Adhesive Joints: Computational Methods and Experiments, (with D. Post),

Adaptive Mesh Refinements and Nonlinear Analyses session of Recent Advances in
Computational Mechanics, Joint ASME/ASCE Mechanics Conference, Albuquerque, New
Mexico, June 24-26, l985.
121.
On Mixed Formulations of Various Plate Theories, Reduced Integration and Mixed

Elements session of Recent Advances in Computational Mechanics, Joint ASME/ASCE
Mechanics Conference, Albuquerque, New Mexico, June 24-26, l985.
122.
Recent Developments and Trends in Computational Natural Convection, (with D.

Pelletier and J. Schetz) Computational Fluid Mechanics session of Recent Advances in
Computational Mechanics, Joint ASME/ASCE Mechanics Conference, Albuquerque, New
Mexico, June 24-26, l985.
123.
On Computational Schemes for Global-Local Stress Analysis, Workshop on

Computational Methods for Structural Mechanics and Dynamics, W. J. Stroud, et al. (eds.),
Conference Publication 3034, pp. 123-134, NASA Langley Research Center, Hampton,
VA, June 29-21, 1985.
124.
On a Higher Order Shear Deformation Theory for Laminated Plates, Seminar, L.T.A.S.
Dynamique des Constructions Mechaniques, Universite de Liege, June 1985.
125.
Mixed Formulations of Various Plate Theories, Seminar, School of Aerospace,

Mechanical and Nuclear Engineering, University of Oklahoma, October, 1985.
126.
Stress Prediction in Composite Panels, Seminar, NASA Langley Research Center,

Hampton, VA, November 15, 1985.
127.
On Higher-Order Shear Deformation Plate Theories and Mixed Finite Element

Models, Seminar, Civil and Environmental Engineering, University of Rhode Island,
Kingston, Rhode Island, November, 1985.
128.
Finite Element Methods of Fluid Flow, Seminar, Defense Metallurgical Research

Laboratory, Hyderabad, India, Nov. 25, 1985.
129.
Nonlinear Analysis of Composite Laminates, Seminar, Defense Metallurgical Research

Laboratory, Hyderabad, India, Nov. 26, 1985.
130.
Nonlinear Material Models of Composite Plates and Shells, Seminar, Bhabha Atomoic
Research Center, Trombay, India, Dec. 5, 1985.
131.
Nonlinear Finite Element Models of Laminated Plates and Shells, (with K.

Chandrashekhara), Int. Conference on Finite Elements in Computational Mechanics, Indian
Institute of Technology, Bombay, India, Dec. 2-6, 1985.
132.
The Finite Element Method: Intuition to Generality and Practice, The Clifton C. Garvin
Distinguished Professorship Lecture, Dec. 10, 1985, Virginia Polytechnic Institute,
Blacksburg, VA 24061.
69
133.
The Finite Element Method: A Decade of Innovation and Maturity, Seminar, The City
College of New York and Columbia University Joint Seminars in Engineering Mechanics
(the first seminar), Feb. 19, 1986.
134.
Some Ideas on the Modeling of Thick-Section Composites, Navy Workshop on Stiffened

Shell Structures, Washington, D.C., March 17-18, 1986.
135.
On Kinematic and Constitutive Models of Laminated Composite Plates, ARO

Workshop on Constitutive Models, Virginia Polytechnic Institute and State University,
Blacksburg, March 24-26, 1986.
136.
Penalty Variational Formulation of Viscous Incompressible Fluid Flows, Variational

Methods in Geosciences, Y. K. Sasaki (ed.), Elsevier, Amesterdam, 1986.
137.
Mixed Variational Formulations of Various Theories of Laminated Composite Plates,

Computational Mechanics '86 Theory and Applications, Vol. 1 (G. Yagawa and S. N. Atluri,
eds.), pp. IV-213 to IV-223, Springer-Verlag, Tokyo, 1986.
138.
On a Third-Order Shear Deformation Theory for Laminated Composite Shells, (with

C. F. Liu), Proc. Int. Symp. on Composite Materials and Struct., Beijing, China, June 10-13,
1986, pp. 288-294.
139.
Nonlinear Analysis of Composite Laminates Accounting for Elastic-Plastic Material

Behavior, (with K. Chandrashekhara), Proc. Int. Symp. on Composite Materials and Struct.,
Beijing, China, June 10-13, 1986, pp. 162-167.
140.
On Refined Theories of Laminated Composite Plates, Space Science and Technology

Colloquia, ISRO-IISC Space Technology Cell, Indian Institute of Science, Bangalore, India,
25 June 1986.
141.
Current Research Trends in Composite Mechanics, Seminar, ISRO Satellite Center,

Bangalore, India, June 27, 1986.
142.
Finite Element Models of Fluid Flow with Heat Transfer, Seminar, Indian Institute of
Technology, Madras, India, June 30, 1986.
143.
Nonlinear Vibrations of Laminated Composite Plates Using Mixed Shear Deformable

Elements, (with C. F. Liu), 1986 Joint ASME PVP and Computer Engng. Div. Conference d
Exhibition, July 20-24, 1986, Chicago, Illinois.
144.
Analysis of Laminated Composite Plates Using Higher-Order Shear Deformation

Theories, Seminar, Technical University of Munich, West Germany, July 24, 1986.
145.
Nonlinear Analysis of Laminated Composite Plates and Shells, Seminar, University of

Wuppertal, West Germany, August 14, 1986.
146.
Transient Analysis of Laminated Plates and Shells with Elastic-Plastic Material

Behavior, (with K. Chandrashekhara) 23rd Annual Meeting of the Society of Engineering
Science, State University of New York, Buffalo, August 25-27, 1986.
147.
A First-Ply-Failure Analysis of Composite Laminates, (with A. Pandey), 23rd Annual

Meeting of the Society of Engineering Science, State University of New York, Buffalo,
August 25-27, 1986.
148.
On the Solutions of Shear Deformation Theories of Plates, (with A. Khdeir and L.

Librescu), 23rd Annual Meeting of the Society of Engineering Science, State University of
New York, Buffalo, August 25-27, 1986.
70
149.
A Critical Review and Generalization Shear Deformable Plate Theories, (with L.

Librescu) EUROMECH Colloquium 219 On Refined Dynamical Theories of Beams, Plates, and
Shells and Their Applications, Gesamthochschule Kassel Universitt, West Germany, Sept.
23-26, 1986.
150.
A Generalization of the Theory of Anisotropic Laminated Composite Plates, (with L.

Librescu), First Conference on Composite Materials, Dayton, OH, October 7-9, 1986.
151.
n Refined Kinematic Modeling of Thick Laminated Composite Plates, Solid Mechanics

Seminar Series, Department of Mechanical and Industrial Engineering, Clarkson
University, Potsdam, TN, December 9, 1986.
152.
Some Recent Developments in the Modeling of Thick Laminated Composite Plates,

Graduate Mechanics Seminar, Department of Engineering Science and Mechanics,
University of Tennessee, Knoxville, TN, October 14, 1986.
153.
On Refined Theories of Laminated Composite Plates, Seminar, Department of

Engineering Mechanics, Ohio State University, Columbus, OH, October 17, 1986.
154.
On the Numerical Modeling of Laminated Composite Structures, Seminar, General

Motors Research Laboratories, January 9, 1987.
155.
Nonlinear Viscoelastic Analysis of Adhesively Bonded Joints,(with S. Roy) Tire Society

Meeting, University of Akron, OH, March 1987.
156.
Mixed, Updated Lagrangian Computational Model for Plane Elastic Contact

Problems, Symposium on Unilateral Problems in Mechanics, The International Society for
the Interaction of Mechanics and Mathematics, Universita di Roma 2, April 6-8, 1987.
157.
A Post-First-Ply Failure Analysis of Composite Laminates, (with A. K. Pandey), 28th

AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference,
Monterey, CA, April 6-8, 1987.
158.
Geometric and Material Nonlinear Analysis of Laminated Composite Plates and

Shells, (with D. Rourk), 28th Structures, Structural Dynamics and Materials Conference,
Monterey, CA, April 6-8, 1987.
159.
A Locally Implicit Scheme for Navier-Stokes Equations, (with K. C. Reddy and S.

Nayani), Fifth SSME CFD Working Group Meeting, NASA Marshall Space Flight Center,
Alabama, April 21-23, 1987.
160.
Penalty Finite-Element Analysis of Free Surface Flows of Power-Law Fluids, (with M.

Iga), The Mathematics of Finite Elements and Applications, Brunel University, Uxbridge,
ngland, April 28-May 1, 1987.
161.
A Refined Nonlinear Theory of Laminated Composite Plates, The 5th Army Conference
on Applied Mathematics and Computing, U.S. Military Academy, West Point, June 15-18,
1987 (Transactions, pp. 183-202).
162.
A Penalty Finite Element Model for Flows of Non-Newtonian Fluids, (with A. Padhye
and M. Iga), Numerical Methods in Laminar and Turbulent Flow, Part 2, C. Taylor, W. G.
Habashi and M. M. Hafez (eds.), pp. 1153-1165, Concordia University, Montreal, July 610, 1987.
163.
Finite Element Models of Fluid Flow, First Int. Conf. on Industrial and Applied
Mathematics, Paris, France, June 29-July 3, 1987.
71
164.
Small Strain and Moderate Rotation Shear Deformation Theories for Anisotropic Plates
and Shells, First Int. Conf. on Industrial and Applied Mathematics, Paris, France, June 29July 3, 1987.
165.
On a Moderate Rotation Theory of Elastic Anisotropic Shells, (with R. Schmidt and L.

Librescu), Proc. 20th Midwestern Mechanics Conference, Purdue University, W. Lafayette,
August 31-Sept. 2, 1987, pp. 616-622.
166.
Geometric and Viscoelastic Nonlinear Analysis of Adhesive Joints, (with S. Roy and
H. F. Brinson), Mechanical Behavior of Adhesive Joints (EUROMECH 227), Saint-Etienne,
France, Aug. 31-Sept. 2, 1987.
167.
On a Generalization of Refined Plate Theories, Joint Colloquium, Department of

Mechanical Engineering and Center for Space Structures and Controls, The University of
Colorado at Boulder, Sept. 18, 1987.
168.
On Refined Theories of Laminated Anisotropic Composite Plates, 1987 Annual Meeting

of the Society of Engineering Science, University of Utah, Salt Lake City, Sept. 20-23, 1987.
169.
NOVA: A Nonlinear Viscoelastic Analysis Program, (with S. Roy), Proceedings of the

19th International SAMPE Technical Conference on the Nation's Future Material Needs, edited
by T. Lynch, et al., SAMPE, Crystal City, VA, October 15-17,1987, pp. 87-99.
170.
On a Penalty Function Method in the Finite-Element Analysis of Problems in

Mechanics, Graduate Seminar, Department of Mechanical Engineering, University of
Pittsburgh, Pittsburgh, PA, October 23, 1987.
171.
A General Shear Deformation Theory of Laminated Composite Plates, Graduate

Seminar, Department of Mechanical Engineering and Applied Mathematics, University
of Virginia, Charlottesville, VA, Nov. 20, 1987.
172.
A General Theory of Laminated Composite Plates, Winter Seminar Series, CCMS,

VPI&SU, Blacksburg, VA, December 1987.
173.
A Small Strain and Moderate Rotation Theory of Elastic Anisotropic Plates, ASME
Winter Annual Meeting, Boston, December 13-18, 1987.
174.
The Diffusion of Gases and Vapors in Polymers: Effect of Strain and Boundaries with
Applications to the Durability of Adhesive Joints, (with D. R. Lefebvre, S. Roy, D. A.
Dillard, and H. F. Brinson), 1988 Adhesion Society Meeting, February, Charleston, NC.
175.
Finite Element Models of Laminated Composite Plates, Seminar, Swanson Analysis

Systems, Inc., April, 1988.
176.
On Recent Developments in Refined Theories of Composite Laminates, Colloquium,

Department of Aerospace Engineering and Mechanics, University of Minnesota,
Minneapolis, April, 1988.
177.
On Computational Models of Fluid Flow and Composite Laminates, Seminar, ICASE,

NASA Langley, Hampton, VA, April, 1988.
178.
A Plate Bending Element Based on a Generalized Laminate Plate Theory, (with E. J.

Barbero and J. L. Teply), 29th Structures, Structural Dynamics and Materials Conference,
April 18-20, Williamsburg, VA (AIAA 88-2322, pp. 927-943 of the proceedings).
179.
A Direct Incorporation of the Aboudi Micromechanical Constitutive Model into

Lamination Theory, (with R. T. Arenburg) ASCE/EMD Specialty Conference, Virginia
Poltechnic Institute, Blacksburg, VA, May 22-25, 1987.
72
180.
An Accurate Prediction of Stress and and Natural Frequencies in Laminated Composite

Plates, (with E. J. Barbero) ASCE/EMD Specialty Conference, Virginia Polytechnic
Institute, Blacksburg, VA, May 23-25, 1987.
181.
On Dynamic Stability of Plates Using Shear Deformation Theories, (with E.

ogeswaren), ASCE/EMD Specialty Conference, Virginia Polytechnic Institute, Blacksburg,
VA, May 23-25, 1987.
182.
A Moderate Rotation Plate Finite Element for Composite Laminates, (with F. A.

Palmerio and R. Schmidt), ASCE/EMD Specialty Conference, Virginia Polytechnic Institute
and State University, Blacksburg, VA, May 23-25, 1987.
183.
On Computational Models for the Nonlinear Analysis of Bolted and Adhesively

Bonded Joints, Applied Mechanics Seminar Series, Montana State University, Bozeman,
Montana, May 1988.
184.
Modeling of Composite Laminates, Composites Seminar, David Taylor Research Center,

Annapolis, June 1988.
185.
Predictive Modeling of Adhesively Bonded Joints, (with S. Roy), Thirty-Fifth Sagamore

Materials Research Conference, June 26-30, 1988, Manchester, New Hampshire.
186.
On Analytical Modeling of Thick Composites, (with E. J. Barbero and J. L. Teply),

Third Int. Conf. on CAD/CAM Robotics & Factories of the Future, August 14-17, 1988,
Southfield, Michigan.
187.
Finite-Element Analysis of Shell Structures, Seminar, Nuclear Systems Division, Indira

Gandhi Center for Atomic Research, Kalpakkam, Tamilnadu, India, August 1988.
188.
Recent Advances in the Finite Element Analysis of Composite Structures, Seminar,

Structural Engineering Research Center (CSIR), Taramani, Madras, India, August 1988.
189.
A Layer-Wise Shear Deformation Theory for Composite Laminates, Seminar,

Aeronautical Development Agency, Bangalore, India, August 1988.
190.
An Overview of Shear Deformation Plate Theories, Seminar, Department of Aerospace

Engineering, Indian Institute of Science, Bangalore, August, 1988.
191.
Analysis of Composite Structures, Seminar, The Aeronautical Society of India (Madras

Branch), Madras, India, August 1988.
The following lectures were delivered at the Advanced Study Institute on Finite Element
Analysis for Engineering Design, 1-10 Aug. 1988, Indian Institute of Technology-Madras,
India:
192.
Review of the Equations of Mechanics."
193.
Variational Formulations and Methods."
194.
An Introduction to the Finite Element Method."
195.
Two-Dimensional Theories of Plates."
196.
Mechanics of Composite Structures."
197.
Analysis of Laminated Composite Structures.
198.
The Finite Element Method in Engineering Science, Seminar Chaitanya Bharati

Institute of Technology, Hyderabad, India, August 1988.
199.
Numerical Simulation of Viscoelastic Flows Using a Penalty Finite Element Model,

(with M. Iga), International Conference on Computational Methods in Flow Analysis,
(ICCMFA '88), Sept. 5-8, 1988, Okayama, Japan (pp. 257-265 of the proceedings).
73
200.
A Refined Small Strain and Moderate Rotation Theory of Elastic Anisotropic Shells,
(with R. Schmidt), 1988 Winter Annual Meeting of ASME, November 27-Dec. 2, 1988,
Chicago, IL.
201.
Effect of Moisture Diffusion on Stress Distributions in Adhesive Joints, (with S. Roy),

in session on Advances in Adhesively Bonded Joints, 1988 Winter Annual Meeting of ASME,
November 27-December 2, 1988, Chicago, IL.
202.
A Review and Generalization of Displacement Based Theories, First Pan American

Congress of Applied Mechanics (PACAM), Rio de Janeiro, Brazil, Jan 3-6, 1989, pp. 597-600.
203.
On the Finite Element Modeling of Problems in Solid and Fluid Mechanics, Seminar,
Laboratorion National de Computacao Cientifica (LNCC), Rio de Janeiro, Brasil, January
5, 1989.
204.
On Penalty Finite Element Models in Fluid and Structural Problems, Seminar, COPPE,
Federal University of Rio de Janeiro, Brazil, January 6, 1989.
205.
On Refined Theories of Laminated Composite Plates, Seminar, Department of

Mechanical Engineering, Florida State University, Tallahassee, Florida, March 27, 1989.
206.
Nonlinear Analysis of Composite Laminates Using a Generalized Laminated Plate

Theory, (with E. J. Barbero), Sixth Annual Review, Center for Composite Materials and
Structures, Virginia Tech., Blacksburg, April 9-11, 1989.
207.
The Penalty Function Method in the Formulation of Incompressible Fluids and Shear
Deformable Plates, Civil Engineering/Applied Mechanics Seminar, University of Virginia,
Charlottesville, VA, May 2, 1989.
208.
A General Nonlinear Theory of Laminated Anisotropic Composite Plates, (with E. J.

Barbero and J. L. Teply) The First USSR-USA Symposium on Mechanics of Composite
Materials, May 23-26, 1989, Riga, Latvian SSR, USSR, (pp. 177-186 of the proceedings).
209.
On Modeling of Delamination in Composite Laminates, Seminar, General Dynamics,

Ft. Worth Division, July 6, 1989.
210.
Applications of the Aboudi Micromechanics Theory to Metal Matrix Composites,

(with R. T. Arenburg), The Third-Joint ASCE/ASME Mechanics Conference, July 9-12, 1989,
University of California, San Diego, CA; paper appeared in: Mechanics of Composite
Materials and Structures, J.N. Reddy and J. L. Teply (eds.), AMD-Vol. 100, pp. 33-40, The
American Society of Mechanical Engineers, New York, 1989.
211.
An Accurate Determination of Stresses in ARALL Laminates Using a Generalized

Laminate Plate Theory, (with E. J. Barbero and J. L. Teply), The Third-Joint ASCE/ASME
Mechanics Conference, July 9-12, 1989, University of California, San Diego, CA; paper
appeared in: Mechanics of Composite Materials and Structures, J.N. Reddy and J. L. Teply
(eds.), AMD-Vol. 100, pp. 55-62, The American Society of Mechanical Engineers, New
York, 1989.
212.
Probabilistic Micromechanics for Metal-Matrix Composites, (with S. P. Engelstad) The

Third-Joint ASCE/ASME Mechanics Conference, July 9-12, 1989.
213.
On Finite Element Models of the Buckling and Vibration of Composite Laminates, The
1989 ASME Pressure Vessels and Piping Conference, July 23-27, 1989, Honolulu, Hawaii;
paper appeared in: Dynamics of Plates and Shells-1989, H. Chung, G. Yamada and Y.
Narita (eds.), PVP-Vol. 1 78, pp. 1-16, The American Society of Mechanical Engineers,
New York, 1989.
74
214.
Analisis de Placas de Materiales Compuestos con Delaminacion y Pandeo, (with E. J.

Barbero), X Congresso Ibero-Latino-Americano Sobre Methodos Computacionais em Engennaria
(MECOM-89), Porto, Portugal, Sept. 25-27, 1989.
215.
An Application of the Generalized Laminate Plate Theory to Delamination Buckling,

(with E. J. Barbero), Fourth Technical Conference on Composite Materials, American Society
for Composites, Virginia Tech., Blacksburg, October 3-6, 1989.
216.
Numerical Stress Intensity Factor Determination of Notched Laminated Specimens,

(with D. Turlier), Mechanics and Mechanisms of Damage in Composites and Multimaterials,
St. Etienne, France, Nov. 15-17, 1989.
217.
A Computational Model for Study of Local Effects, (with E. J. Barbero), International

Conference on Engineering Software-89, Indian Institute of Technology, Delhi, India,
December 4-9, 1989.
218.
Vibrations of Laminated Composite Plates Using a Generalized Laminated Plate

Theory, (with E. J. Barbero), 1989 ASME\Winter Annual Meeting, Dec. 14, 1989, San
Francisco.
219.
A Critical Review of the Third-Order Theories of Laminated Composite Plates,

Seminar, National Aeronautical Laboratory, Bangalore, India, December 15, 1989.
220.
A Study of Delamination in Composite Laminates with a Layer-Wise Laminate Plate

Theory, Seminar, Indian Institute of Science, Bangalore, India, December 15, 1989.
221.
Characterization of Delamination in Thick Composite Laminates, Seminar, Bell

Helicopter Textron, Inc., Fort Worth, TX, January 19, 1990.
222.
On a Layerwise Laminate Plate Theory with Application to Delamination, Seminar,

Mechanics of Materials Branch, NASA Langley Research Center, Hampton, VA, January
22, 1990.
223.
Finite-Element Analysis of Structural Vibrations: Recent Developments, Proceedings of

the International Congress on Recent Developments in Air & Structure Borne Sound and
Vibration, edited by M. J. Crocker, pp. 291-305, Auburn University, Alabama, 1990.
224.
A Study of Delamination Buckling in Composite Laminates Using the Generalized

Laminate Plate Theory, (with E. J. Barbero), SECTAM XV (Southeastern Conference on
Theoretical and Applied Mechanics), Georgia Tech, Atlanta, GA, March 22-23, 1990.
225.
Dynamic Instability of Composite Plates Using the First-Order Shear Deformation

Theory, (with J. Moorthy and R. H. Plaut), SECTAM XV (Southeastern Conference on
Theoretical and Applied Mechanics), Georgia Tech, Atlanta, GA, March 22-23, 1990.
226.
Computational Aspects of Finite Elements, Seminar on Engineering and Scientific

Computing, Department of Mathematics, Virginia Polytechnic Institute and State
University, Blacksburg, VA, March 26, 1990.
227.
On the Finite Element Modeling of Physical Processes, Seminar, General Electric

Company, Evendale, Ohio, May 9, 1990.
228.
A Unified Formulation of Micromechanics Models of Fiber-Reinforced Composites,

(with J. L. Teply), IUTAM Symposium on Elastic Behavior of Composite Materials, May 29June 1, 1990, Renesselaer Polytechnic Institute, Troy, NY. Appeared in Inelastic
Deformation of Composite Materials, G. J. Dvorak (Ed.), Springer-Verlag, New York, pp.
341-370.
75
229.
On a Layer-Wise Plate Theory for Composite Laminates, Engineering Mechanics

Seminar, Ohio State University, June 1, 1990.
230.
On Recent Developments in the Refined Theories of Composite Laminates, Seminar,

University of Rome, Italy, June 26, 1990.
231.
On a Layer-Wise Laminate Plate Theory for Thick Composites, Seminar, University of

Rome 2, 'Tor Vergata,' Rome, June 27, 1990.
232.
Penalty Finite-Element Analysis of Non-Newtonian Fluids in Three-Dimensional

Enclosures, Seminar, University of Rome 2, June 28, 1990.
233.
Advances in the Analysis of Laminated Composite Plates, Seminar, Salerno, Italy, July
2, 1990.
234.
On New Developments in the Refined Theories of Plates, New Developments in

Structural Mechanics, University of Catania, Italy, July 4-6, 1990.
235.
Characterization of Local Effects in Laminated Composite Plates, Workshop on

Composite Materials, Indian Institute of Technology, Delhi, India, July 20, 1990.
236.
Modeling of Delamination in Composite Laminates Using a Layer-Wise Plate Theory,

(with E. J. Barbero), Indo-US Workshop on Composites for Aerospace Applications, Bangalore,
India, July 23-27, 1990.
237.
Interlaminar Shear Stress Effects on the Postbuckling Response of Graphite-Epoxy

Panels, (with S. P. Engelstad and N. F. Knight, Jr.), Advances in Structural Testing,
Analysis and Design, (Proc. Int. Conf. on Structural Testing, Analysis and Design, July 29Aug. 3, 1990, Bangalore, India), Tata McGraw-Hill, New Delhi, pp. 102-107, 1990.
238.
On the Modeling of Thick Composites Using a Layer-Wise Laminate Theory, Int. Conf.
on Mechanics, Physics and Structure of Materials, Thessaloniki, Greece, Aug. 19-24, 1990.
239.
A Computational Model for Smart Composite Structures with Embedded Actuators,

(with D. H. Robbins, Jr.) Second World Congress on Computational Mechanics, University of
Stuttgart, West Germany, August 27-31, 1990.
240.
On the Kinematic Modeling of Thick Composite Laminates, Joint Seminar, Center for
Composite Materials and Structures, Rensselaer Polytechnic Institute, Troy, New York,
October 11, 1990.
241.
On the Modeling of Local Stress Fields in Composite Laminates, Seminar, Department

of Aerospace Engineering, University of Maryland, College Park, MD, Oct. 12, 1990.
242.
On Buckling and Post-Buckling of Circular Cylindrical Shells with and without

Stiffeners, Seminar, General Dynamics, Space Systems Division, San Diego, CA, Nov.
26, 1990.
243.
Buckling of Stiffened Circular Cylindrical Shells Using a Layer-Wise Shell Theory,

Seminar, Madras Institute of Technology (MIT), Madras, Jan. 7, 1991.
244.
Postbuckling Response and Failure Prediction of Flat Rectangular Graphite-Epoxy

Plates Loaded in Axial Compression, (with S. P. Engelstad and N. F. Knight, Jr.), 32nd
Structures, Structural Dynamics and Materials (SDM) Conference, April 8-10, 1991,
Baltimore, Maryland (AIAA-91-0910-CP, pp. 888-895, Part 2 of the proceedings).
245.
Modeling of Actuators in Intelligent Structures, (with D. H. Robbins, Jr.), 1991 Spring

Meeting of Materials Research Society, Anaheim, California, April 29-May 3, 1991.
76
246.
Energy and Variational Methods in Applied Mechanics, Lecture 1 at Instituto de

Aeronautica e Espaco (Institute for Aeronautics and Space)- CTA, Sao Jose does
Campos-SP, Brasil, May 6, 1991.
247.
Finite Element Analysis of Problems in Solid Mechanics, Fluid Mechanics, and Heat
Transfer, Lecture 2 at Instituto de Aeronautica e Espaco (Institute for Aeronautics and
Space)-CTA, So Jose dos Campos-SP, Brasil, May 7, 1991.
248.
On Refined Theories of Plates and Shells, Lecture 3 at Instituto de Aeronautica e

Espaco (Institute for Aeronautics and Space)-CTA, So Jose dos Campos-SP, Brasil, May
8, 1991.
249.
Mechanics of Anisotropic Plates and Shells, Lecture 4 at Instituto de Aeronautica e

Espaco (Institute for Aeronautics and Space)-CTA, So Jose does Campos-SP, Brasil,
May 9, 1991.
250.
Recent Advances on the Modeling of Laminated Composite Structures, Seminar at

Universidade de So Paulo (University of So Paulo), Department of Civil Engineering,
So Paulo, Brasil, May 10, 1991.
251.
Accurate Determination of Stresses in Aralltm Laminates, (with D. H. Robbins, Jr. and

J. L. Teply), International Aerospace Congress 1991, May 12-16, Melbourne, Australia.
252.
Nonlinear Probabilistic FEM for Composite Shells, (with S. P. Engelstad), ASCE

Engineering Mechanics Specialty Conference, May 19-22, 1991, Columbus, OH.
253.
Computational Models for the Stress Analysis of Woven Composite Structures,

Seminar, Computational Mechanics Branch, NASA Langley Research Center, Hampton,
VA, May 24, 1991.
254.
Probabilistic Micromechanics for Metal Matrix Composites, (with S. P. Engelstad and

D. A. Hopkins), 1991 ASME Applied Mechanics and Biomechanics Summer Conference,
June 17-19, 1991, Columbus, Ohio; appeared in Mechanics of Composites at Elevated and
Cryogenic Temperatures, S. N. Singhal, W. F. Jones, and C. T. Herakovich (eds.), AMDVol. 118, ASME, New York, 1991, pp. 181-193.
255.
On Solution Methods for Nonlinear Equations, Seminar Series in Engineering Mechanics,

Ohio State University, Columbus, OH, June 20, 1991.
256.
Analysis of Laminated Composite Plates Using First- and Second-Order Moderate

Rotation Theories, (with E. Sacco), International Conference on Industrial and Applied
Mathematics, (ICIAM 91), July 8-12, 1991, Washington, D.C.
257.
Axisymmetric Flows Through a Sudden Enlargement with Heat Transfer Using

Consistent Penalty FEM, (with G. Subhas Babu et al.) Seventh Int. Conf. on Numerical
Methods in Thermal Problems, Stanford University, Stanford, CA, July 8-12, 1991.
258.
Numerical Simulation of Fluid Flow and Heat Transfer During Forming Processes,
(with M. P. Reddy), Seventh Int. Conf. on Numerical Methods in Thermal Problems, Stanford
University, CA, July 8-12, 1991.
259.
Nonlinear Probabilistic Finite Element Modeling of Composite Shells, (with S. P.

Engelstad), First U. S. National Congress on Computational Mechanics, Chicago, IL, July 2124, 1991.
260.
A Critical Evaluation of Plate and Shell Elements with Shear and Membrane
Constraints, (with R. Averill), First U. S. National Congress on Computational Mechanics,
Chicago, IL, July 21-24, 1991.
77
261.
A Study of Local and Strain Fields in Composites, (with J. L. Teply), First U. S. National
Congress on Computational Mechanics, Chicago, IL, July 21-24, 1991.
262.
A Layer-Wise Plate Bending Finite Element for Composite Laminates, (with D. H.

Robbins, Jr.), First U. S. National Congress on Computational Mechanics, Chicago, IL, July
21-24, 1991.
263.
On Three-Dimensional Elasticity Solutions of Laminated Composite Plates, (with M.

Savoia), First International Conference on Computational Structures Technology, Heriot-Watt
University, Edinburgh, U.K., August 20-22, 1991.
264.
Element-by-Element Methods for the Solution of Incompressible, Three-Dimensional

Flows, (with M. P. Reddy), Second North American-Soviet Workshop on Computational
Aerodynamics, Montreal Canada, Sept. 3-5, 1991.
265.
A Probabilistic Postbuckling Analysis of Composite Shells, (with S. P. Engelstad), First

Int. Conf. on Computational Stochastic Mechanics, Corfu, Greece, Sept. 17-19, 1991;
Computational Stochastic Mechanics, P. D. Spanos and C. A. Brebbia (eds.), Elsevier, pp.
839-850, 1991.
266.
On Refined Theories of Laminated Composite Plates, Seminar, Technical University of

Athens, Greece, Sept. 19, 1991.
267.
A Layer-Wise Plate Bending Finite Element for Composite Laminates, (with D. H.

Robbins), Twenty-Second Midwestern Mechanics Conference, University of Misouri-Rolla,
Rolla, MO, Oct. 6-9, 1991.
268.
Stability of Thick Composite Laminates Using the Layer-Wise Theory, (with J. L.

Teply), Sixth Technical Conference on Composite Materials, American Society for
Composites, Albany, NY, Oct. 7-9, 1991.
269.
A Penalty FEM and EBE Solution Methods for Incompressible Three-Dimensional

Flows, Seminar, McDonell-Douglas Aircraft Co., St. Louis, MO, Oct. 7, 1991.
270.
Accurate Prediction of Stresses and Failures in Thick Composite Laminates, (with D. H.

Robbins, Jr. and Y. S. N. Reddy) Second USSR- U. S. Symposium on Mechanics of Composite
Materials, Albany, NY, Oct. 10-11, 1991.
271.
A Layer-Wise Laminate Theory for the Simulation of Imbedded Actuators and Local
Failures, (with D. H. Robbins and Y. S. N. Reddy), IUTAM Symposium on Local
Mechanics Concepts for Composite Material Systems, Blacksburg, VA, Oct. 27-31, 1991.
272.
Modeling of Thick Composite Laminates Using Multiple Assumed Displacement

Fields, Oscar S. Wyatt, Jr. Chair Seminar, Texas A&M University, College Station, TX,
Nov. 11, 1991.
273.
FEM Analysis of Heat Transfer in a Developing Turbulent Pipe Flow -- A Comparative

Study of Nine Models, (with M. S. Ravisankar, K. N. Seetharamu, P. A. Aswatha
Narayana), The Eleventh National Conference on Heat and Mass Transfer, Madras, India,
December 1991.
274.
On the Modeling of Delamination in Thick Composites, (with D. H. Robbins and A. V.

Krishna Murty) in Engineering Analysis Techniques for Composite Materials, L. Schwer, J.N.
Reddy and A. Mal (eds.), NDE-Vol. 10, American Society of Mechanical Engineers, New
York, 1991.pp. 133-149.
78
275.
A 3-D Penalty Finite Element Model of Forming Processes, (with M. P. Reddy and H.
U. Akay) in Advances in Finite Element Analysis in Fluid Dynamics, M. N. Dhaubhadel, M.
S. Engelman, J.N. Reddy (eds.), FED-Vol. 123, American Society of Mechanical
Engineers, New York, 1991 (Proc. of the Symposium held at ASME Winter Annual
Meeting, Atlanta, GA, Dec. 4-6, 1991), pp. 61-76.
276.
Numerical Simulation of Solidification of Aluminum Alloy Castings, (with G. S.

Reddy and W. J. Mascarendhas), in Advances in Finite Element Analysis in Fluid Dynamics,
M. N. Dhaubhadel, M. S. Engelman, J.N. Reddy (eds.), FED-Vol. 123, American Society
of Mechanical Engineers, New York, 1991 (Proc. of the Symposium held at ASME Winter
Annual Meeting, Atlanta, GA, Dec. 4-6, 1991), pp. 39-46.
277.
A Finite Element Simulation of Mold Filling Processes, (with M. P. Reddy) in Advances

in Finite Deformation Problems in Materials Processing and Structures, N. Chandra and J.N.
Reddy (eds.), AMD-Vol. 125, American Society of Mechanical Engineers, New York,
1991 (Proc. of the Symposium held at ASME\ Winter Annual Meeting, Atlanta, GA, Dec.
4-6, 1991), pp. 65-74.
278.
Modeling of Laminated Composite Plates and Shells Using a Layer-Wise Shell Theory,
Asian Pacific Conference on Computational Mechanics, University of Hong Kong, Hong
Kong, Dec. 11-13, 1991; also appeared in Computational Mechanics, Vol. 2, Y. K. Cheung, J.
H. Law and A. Y. T. Leung (eds.), A. A. Balkena, Netherlands, 1991, pp. 1031-1036.
279.
Computational Models of Inelasticity in Composite Laminates, (with S. P. Engelstad

and R. T. Arenburg), COMPLAS\ III: Third Int. Conf.on Computational Plasticity
Fundamentals and Applications, Barcelona, Spain, April 6-10, 1992.
280.
On the Application of Incremental Theory of Plasticity with Endochronic Hardening

Rule, (with S. P. Engelstad and S. K. Jain), COMPLAS\ III: Third Int. Conf.on
Computational Plasticity Fundamentals and Applications, Barcelona, Spain, April 6-10, 1992.
281.
Global/Local Analysis of Laminated Composite Plates Using Variable Kinematic

Elements, (with D. H. Robbins, Jr.), AIAA/ASME/ASCE/AHS/ASC 33rd Structures,
Structural Dynamics, and Materials (SDM) Conference, April 13-15, 1992, Dallas, Texas.
282.
Recent Developments in the Kinematic Modeling of Laminated Composite Plates and

Shells, Sixteenth South Eastern Conference on Theoretical and Applied Mechanics,, University
of Tennessee Space Institute, Nashville, April 16, 1992.
283.
Variable Kinematic Models and Mesh Superposition Techniques for the Analysis of
Composite Laminates, Seminar, Lockheed Aeronautical Systems Company, Marietta,
Georgia, April 22, 1992.
284.
Modeling of Thick Composite Laminates Using Multiple Assumed Displacement

Fields, Structural Mechanics Seminar, Georgia Tech, April 23, 1992.
285.
Consistent Definition of Unit Cell for Nonlinear Analysis of Fibrous Composites, (with
J. L. Teply) 1992 ASME Applied Mechanics, Materials and Aerospace Summer Meeting, April
28-May 1, 1992, Scottsdale, Arizona.
286.
Nonlinear Analysis of Composite Structures by the Finite Element and Boundary

Element Methods, (with F. Kokkinos), Third National Congress on Mechanics, June 25-27,
1992, Athens, Greece.
79
287.
Failure Prediction in Composite Laminates According to the Layerwise Plate Theory,

(with Y. S. N. Reddy), First World Congress of Nonlinear Analysts, August 19-26, 1992,
Tampa, Florida.
288.
Analysis of Composite Laminates Using Variable Kinematic Finite Elements, (with D.

H. Robbins, Jr.), Proceedings of the 7th Brazilian Symposium on Piping and Pressure Vessels
(SIBRAT), C. A. C. Selke and C. S. Baecellos (eds.), University of Santa Catarina,
Florianopolis, Brazil, pp. 47-68, 1992.
289.
A Global-Local Computational Procedure for the Analysis of Thick Composite

Laminates, TAM Seminar, Department of Theoretical and Applied Mechanics, Cornell
University, Ithaca, October 14, 1992.
290.
Analysis of Thick Composite Laminates Using Variable Kinematic Finite Elements,

Seventh Technical Conference on Composite Materials, American Society for Composites,
October 14-17, 1992, Pennsylvania State University, State College, PA.
291.
A Global-Local Computational Procedure Based on Layerwise Theory of Composite

Laminates, TICOM Seminar, University of Texas at Austin, October 22, 1992.
292.
An Adaptive, Multilevel Numerical Scheme for the Solution of the Navier-Stokes

Equations, (with R. M. Fithen) the ASME Winter Annual Meeting, Anaheim, CA,
November 9-13, 1992. Appeared in Adaptive, Multilevel and Hierarchical Computational
Strategies, AMD-Vol. 157, A. K. Noor (ed.), ASME, New York, pp. 275-292, 1992.
293.
Geometrically Nonlinear Analysis of Laminated Composite Shells Using a MacroMicro Cumulative Damage Model, (with R. C. Averill) the ASME Winter Annual
Meeting, Anaheim, CA, November 9-13, 1992. Damage Mechanics in Composites, AMDVol. 150 and AD-Vol. 32, D. H. Allen and D. C. Lagoudas (eds.), ASME, New York, pp.
255-273, 1992.
294.
A Macro-Micro Mechanics Procedure for Geometrically Nonlinear Analysis of

Laminated Composite Shells with Cumulative Damage, (with R. C. Averill) Symposium
on Damage Mechanics, at the ASME Winter Annual Meeting, Anaheim, CA, November 913, 1992.
295.
The Finite Element Method in Engineering Science, Seminar, Department of

Mechanical Engineering, Indian Institute of Science, Bangalore, India, December 4, 1992.
296.
On the Modeling of Composite Laminates: Intuition to Generality and Theory to

Practice, the Neelakantam Memorial Lecture at the Annual Convention of the Aeronautical
Society of India, December 11, 1992, Bangalore, India.
297.
Global-Local Hierarchical Modeling of Composite Laminates Using Variable Kinematic

Finite Elements and Mesh Superposition, (with D. H. Robbins, Jr.), Proceedings of the
IMACS International Symposium on Mathematical Modelling and Scientific Computing, S. K.
Dey and E. J. Kansa (eds.), Bangalore, India, pp. 209-228, 1992.
298.
A Layerwise Laminate Theory and Global-Local Computational Schemes, Seminar,

Sandia National Laboratory, Albuquerque, NM, February 1, 1993.
299.
A Study of the Effect of Embedded Piezoelectric Layers in Composite Cylinders, (with

J. A. Mitchell) SPIE's 1993 North American Conference on Smart Structures and Materials,
Albuquerque, New Mexico, February 1-4, 1993.
80
300.
On the Modeling of Actuators in Laminated Composite Structures," (with D. H.

Robbins, Jr.) SPIE's 1993 North American Conference on Smart Structures and Materials,
Albuquerque, New Mexico, February 1-4, 1993.
301.
A Hierarchical Computational Procedure for Accurate Modeling of Local Effects in

Composite Laminates," AFOSR/NA Seminar, Air Force Office of Scientific Research,
Bolling AFB, February 12, 1993.
302.
Global-Local Computational Procedures Based on Variable Kinematic Finite Elements

and Mesh Superposition Techniques," Seminar, Dept. of Civil Engineering, University of
Minnesota, March 5, 1993.
303.
A Simultaneous Multiple Model Approach for Laminated Composite Structures," Joint

Seminar by the Center for Mechanics of Composites, Texas A & M University, College
Station, Texas, April 6, 1993.
304.
The Finite Element Method in Engineering Science, Seminar, Department of Civil

Engineering, Texas Tech University, Lubbock, April 13, 1993.
305.
Free Vibration Analysis of Laminated Plates Using a Layer-Wise Theory, (with A.

Nosier and R. K. Kapania), AIAA/ASME/ASCE/AHS/ASC 34th Structures, Structural
Dynamics, and Materials ( SDM) Conference, April 1993, La Jolla, CA, Paper No. AIAA-931320-CP.
306.
Thermomechanical Postbuckling Analysis of Laminated Composite Shells, (with R. C.

Averill), AIAA/ASME/ASCE/AHS/ASC 34th Structures, Structural Dynamics and Materials
(SDM) Conference, La Jolla, CA, April 1993.
307.
On a Hierarchical Computational Model for the Analysis of Composite Laminates,

Seminar, University of Bologna, Bologna, May 22, 1993.
308.
Stability of Laminated Cylindrical Shells According to the Layerwise Shell Theory,

Seminar, University of Rome II, May 28, 1993.
309.
Mechanics of Composite Laminates and Associated Computational Models, a series of

lectures presented at University of Naples, Naples, Italy, May 30-June 2, 1993.
310.
A Simultaneous Multiple Model Approach for Accurate Modeling of Composite

Laminates, Seminar, University of Rome II, June 3, 1993.
311.
Buckling and Postbuckling Behavior of Eccentrically Stiffened Laminated Cylinders

under Axial Extension, (with M. Savoia) Seventh Italian Convention on Computational
Mechanics, Trieste, Italy, June 1-3, 1993.
312.
Through-Thickness Effects Thermomechanical Postbuckling of Laminated Structures,

(with R. C. Averill), MEET'N'93: ASME-AMD, ASCE-EMD, and SES Conference, June 6-9,
Charlottesville, VA 1993.
313.
Postbuckling Analysis of Composite Shells Using Probabilistic Finite Elements, (with

S. P. Engelstad), MEET'N'93: ASME-AMD, ASCE-EMD, and SES Conference, June 6-9,
314.
Application of Finite Element Method to Composite Materials, (with J. L. Teply),

MEET'N'93: ASME-AMD, ASCE-EMD, and SES Conference, June 6-9, Charlottesville, VA
1993.
315.
Analysis of Discretely Stiffened Laminated Cylindrical Shells, (with S. Kassegne),

1993.
81
316.
A Novel Computational Procedure for the Analysis of Thick Composite Laminates,

(with D. H. Robbins, Jr.), MEET'N'93: ASME-AMD, ASCE-EMD, and SES Conference,
June 6-9, Charlottesville, VA 1993. Appeared in Mechanics of Thick Composites, Y. D. S.
Rajapakse (ed.), AMD-Vol. 162, American Society of Mechanical Engineers, New York,
pp. 51-66, 1993
317.
Structural Response of Composite Laminates with Piezoelectric Layers, (with J. A.

Mitchell), MEET'N'93: ASME-AMD, ASCE-EMD, and SES Conference, June 6-9,
318.
Buckling and Postbuckling of Eccentrically Laminated Cylinders, (with M. Savoia),

1993.Appeared in Mechanics of Composite Materials-Nonlinear Effects, M. W. Hyer (ed.),
AMD-Vol. 159, American Society of Mechanical Engineers, New York, pp. 127-142, 1993.
319.
Finite Element Analysis of Viscous Incompressible Flows Using Primitive Variables,

Proceedings of the 9th ADINA Conference, MIT, Cambridge, MA, 23-25 June, 1993.
320.
On Hierarchical Finite Elements and Mesh Superposition Techniques, Seminar, L. G.

Mouchel & Partners Ltd., Consulting Engineers, Weybridge, Surrey, U. K., June 29, 1993.
321.
A Computational Model for Composite Laminates, Research Colloquium, Department

of Civil Engineering, University College of Swansea, Swansea, Wales, U. K., July 1, 1993.
322.
A Global-Local Computational Procedure for Composite Laminates, Seminar, British

Aerospace, Warton, U. K., July 2, 1993.
323.
Refined Theories of Laminated Plates and Shells, Seminar, Department of

Mathematical Applications, Zaragoza University, Zaragoza, Spain, July 8, 1993.
324.
Theory and Analysis of Laminated Plates and Shells, Seminar, Department of

325.
Computational Fluid Dynamics-An Overview, Seminar, Department of Mathematical

Applications, Zaragoza University, Zaragoza, Spain, July 9, 1993.
326.
Finite Element Analysis of Convective Heat Transfer, Seminar, Department of

327.
Hierarchical Plate Elements and Mesh Superposition for Determination of Local Stress
Fields in Composite Laminates, (with D. H. Robbins), Second U. S. National Congress of
Computational Mechanics, Hyatt Regency Hotel, Washington, DC , August 16-18, 1993.
328.
Homogenization Techniques Using the Finite Element Method, (with J. L. Teply),

Second U. S. National Congress of Computational Mechanics, Hyatt Regency Hotel,
Washington, D. C., August 16-18, 1993.
329.
Free Vibration and Impact Response of Laminated Composites Using a Layer-Wise

Theory, (with A. Nosier and R. K. Kapania), Army Symposium on Solid Mechanics 1993,
Plymouth, MA, August 17-19, 1993.
330.
An Accurate Prediction of Failures in Composite Laminates Using a Layerwise

Theory, (with Y. S. N. Reddy) Ninth International Conference on Composite Materials
(IICM-9), Madrid, Spain, 12-16 July 1993.
331.
Global-Local Computational Procedures for the Analysis of Composite Laminates,

Seminar, Department of Engineering Science & Mechanics, Penn State University, State
College, PA, December 8, 1993.
82
332.
Variable Kinematic Finite Elements and Mesh Superposition Method for the Analysis
of Composite Laminates, Graduate College Seminar on Modeling and Discretization of
Continua, University of Stuttgart, Stuttgart, Germany, December 16, 1993.
333.
Postbuckling Behavior of Stiffened Cylindrical Shells According to the Layerwise

Theory, (with M. Savoia), ASCE Space `94, Albuquerque, NM, February 17-19, 1994.
334.
An Accurate Stress Analysis Procedure for Laminated Systems, Seminar, Intel

Corporation, Phoenix, March 1, 1994.
335.
On Global Local Computational Models for Laminated Structures, Aeronautical and

Astronautical Engineering Seminars, University of Illinois, Urbana, March 16, 1994.
336.
A New Strain Energy Release Rate Concept for Interfacial Cracks, (with A. V. Krishna
Murty and H. K. Harikumar), Fracture Mechanics, Proceedings of the Indo-German
Workshop held at the Indian Institute of Science, Bangalore, India, March 28-April 1,
1994.
337.
On a Practical Analysis Procedure for Laminated Composite Structures, Seminar to

Ford Finite Element User Group, Ford Motor Company, Dearborn, Michigan, May 13,
1994.
338.
An Hierarchical Global-Local Computational Procedure for the Analysis of Laminated

Composite Plates with Piezoelectric Layers, Twelfth U.S. National Congress of Applied
Mechanics, University of Washington, Seattle, June 26-July 1, 1994.
339.
An Hierarchical Multi-Model Approach to the Analysis of Laminated Composite

Structures, Third World Congress on Computational Mechanics, Chiba, Japan, August 1-5,
1994.
340.
Modeling of Composite Laminates with Piezoelectric Laminae." A seminar presented at

the Centre for Computational Mechanics, National University of Singapore, August 4, 1994.
341.
Stiffness Reduction in Composite Laminates due to Transverse Matrix Crack Damage,

(with G. N. Praveen), IUTAM Symposium on Microstructure-Property Interactions in
Composite Materials, Aalborg, Denmark, August 23-25, 1994.
342.
Non-Darcy Natural Convection in a Porous Cavity with Constant Heatflux on One

Vertical Wall, (with K. N. Seetharamu, B. V. K. Satya Sai, and P.A. Aswatha Narayana),
Tenth Int. Heat Transfer Conf., Brighton, UK, August, 1994.
343.
Recent Advances in Modeling of Composite Structures, NISA Users' Conference,

Detroit, October 3-4, 1994.
344.
BEM and Penalty FEM Models for Viscous Incompressible Fluids, (with F. Kokkinos)
Society of Engineering Science 31st Annual Technical Meeting, Texas A&M University,
College Station, October 10-12, 1994.
345.
Global-Local Finite Element Modeling of Wave Propagation in Composite Laminates,

(with G. Rengarajan) Society of Engineering Science 31st Annual Technical Meeting, Texas
A&M University, College Station, Oct. 10-12, 1994.
346.
Stiffness reduction in Composite Laminates due to Transverse Matrix Cracks, (with G.

N. Praveen) Society of Engineering Science 31st Annual Technical Meeting, Texas A&M
University, College Station, Oct. 10-12, 1994.
347.
A Continuum Formulation for the Analysis of Laminates with Piezoelectric Lamina,

(with J. A. Mitchell) Society of Engineering Science 31st Annual Technical Meeting, Texas
A&M University, College Station, October 10-12, 1994.
83
348.
Thermal Postbuckling of Stiffened Multilayered Cylinders, (with M. Savoia),

Symposium on Buckling and Postbuckling of Composite Structures session at the ASME
Winter Annual Meeting, Chicago, November 6-11, 1994.
349.
Finite Element Analysis of Composite Materials, a course given at the Middle East
technical University, Ankara, Turkey, December 5-9, 1994.
The following four seminars were presented in a course on Mechanics of Composite Materials" in
Graduate College Seminar on Modeling and Discretization of Continua, University of Stuttgart, Germany:
350.
Higher-Order Shear Deformation Theories, December 13, 1994.
351.
Analytical Solutions of Laminate Theories, December 14, 1994.
352.
Finite Element Models of Laminate Theories, December 15, 1994.
353.
Layerwise Theory and Finite Element Models, December 16, 1994.
354.
Analytical Solutions for the Response of Laminated Composites with Piezoelectric

Laminae, (with J. A. Mitchell), Finite Element Modeling of Active Systems session at the
1995 North American Conference on Smart Structures and Materials, San Diego,
February 16-March 3, 1995.
355.
Nonlinear Formulations of Laminated Plates with Piezoelectric Laminae, (with J. A.

Mitchell), Smart Materials and Structures session at the ASCE/EMD Conference, Boulder,
Colorado, May 21-24, 1995.
356.
Hierarchical Modeling of Laminated Composite Structures, Seminar in Mechanics,

University of Paderborn, Paderborn, Germany, July 3, 1995.
357.
Variable Kinematic Models for Global-Local Analysis of Laminated Composite

Structures, Seminar, Institute of Structural Mechanics, German Aerospace Research
Establishment, Braunschweig, Germany, July 4, 1995.
358.
Computational Approaches for Nonlinear Analysis of Laminated Composite

Structures, SIAM International Conference, Hamburg, Germany, July 6-8, 1995.
359.
Evaluation of the Shear Deformation Plate Theories of Composite Laminates, (with P.

Bose), Computational Methods for Composite Structures session at the International
Conference on Computational Engineering Science, Hawaii, 30 July-3 August, 1995.
360.
Recent Developments in the Modeling of Composite Structures, Energy Technology

Conference & Exhibition (ETCE), Houston, Texas, January 28-February 2, 1996 (see
Composite Materials Design & Analysis, Book V, Volume I, pp.1-36), ASME International.
361.
Hierarchical Global-Local Modeling of Composite Structures, Seminar, Center for

Computational Mechanics, National University of Singapore, February 1996.
362.
Global-Local and Hierarchical Computational Procedures for Laminated Composite

Structures, Seminar, Department of Mechanical and Production Engineering, Nanyang
Technological University, Singapore, April 4, 1996.
363.
Refined Theories and Computational Procedures for the Modeling of Smart Composite
Structures, First International Conference on Composite Science and Technology, Durban,
South Africa, 18-20 June 1996. (see Composites Science and Technology, S. Adali and V. E.
Verijenko (eds.), University of Natal, Durban, South Africa, pp. 421-429).
364.
Recent Advances in Numerical Modeling of Composites and Smart Structures, Seventh

Workshop on Composite Materials, University of Zaragoza, Spain, 24 June 1996.
84
365.
A Computational Methodology for Global-Local Analysis of Composite Structures,

Mathematics of Finite Elements and Applications IX (MAFELAP 1996), Brunel University,
Uxbridge, U.K., 25-28 June 1996. Appeared in The Mathematics of Finite Elements and
Applications, Highlights 1996, J. R. Whiteman (ed.), John Wiley, Chichester, UK, pp. 313331, 1997.
366.
FEM Modeling of the Thermomechanical Response of a Composite Laminate with

Shape Memory Alloy Layers, (with D. C. Lagoudas, et al.) Second National Congress on
Computational Mechanics, Greek Association of Computational Mechanics, University of
Patras, Patras, Greece, July 26-28, 1996.
367.
Variable Kinematic Models for Global-Local Analysis of Structures, Seminar, National

Aerospace Laboratory, Bangalore, India, July 20, 1996.
368.
Developments in Global-Local Modeling of Composite Structures, Seminar, Reactor

Design & Development Group, Bhabha Atomic Research Centre, Trombay, Mumbai,
India, August 3, 1996.
369.
Finite Element Solutions for Some Problems Involving Smart Materials, (with G.
Rengarajan) Inelastic Behavior of Materials, session at 33rd Annual Technical Meeting of the
Society of Engineering Science, October 20-23, 1996, Arizona State University, Tempe, AZ.
370.
Crystal Inelasticity of Shape Memory Alloy Single Crystals - A Micromechanics

Model, (with G. Rengarajan) Smart Structures and Materials, session at 33rd Annual
Technical Meeting of the Society of Engineering Science, October 20-23, 1996, Arizona State
University, Tempe, AZ.
371.
On Locking-Free Finite Elements, TICAM Seminar, Department of Aerospace

Engineering and Engineering Mechanics, The University of Texas at Austin, November
7, 1996.
372.
Recent Developments and Future Directions in Computational Structural Dynamics,

Seminar presented in the Center for Computational Mechanics, National University of
Singapore, Dec 5, 1996.
373.
Numerical Modeling of Shape Memory Behavior Using a Continuum Constitutive

Model, (with G. Rengarajan) SPIE Far East and Pacific Symposium on Smart Materials,
Structures, and MEMS, December 11-14, 1996, Indian Institute of Science, Bangalore,
India.
374.
Quasicontinuum Analysis of Phase Transformations in Shape Memory Alloys, (with

G. Rengarajan) SPIE Far East and Pacific Symposium on Smart Materials, Structures, and
MEMS, December 11-14, 1996, Indian Institute of Science, Bangalore, India.
375.
Locking-Free Finite Elements of Shear Deformation Beams and Circular Plates,

Advances in Computational Mechanics, University of Texas, Austin, January 13-15, 1997.
376.
Interlaminar Stress Recovery Near Free Edge Using a Layerwise Element with
Enhanced Strains, (with C. M. Dakshina Moorthy and J. A. Mitchell) Energy Week '97,
Houston, January 28-30, 1997 (Proceedings of the 8th Annual International Energy Week
Conference & Exhibition, Houston, Texas, Book IV, Energy Engineering I, pp. 50-59).
377.
Global-Local Modeling of Composite Laminates Using Variable Kinematic Elements,

Seminar, Polytechnic University (`Brooklyn Poly'), February 7, 1997.
85
378.
Hierarchical Modeling of Composite Laminates: Computational Procedures for GlobalLocal Analysis, Seminar, Mechanical Engineering and Materials Science Department,
Rice University, February 24, 1997.
379.
Accurate Determination of Stresses and Failures in Composite Laminates, Seminar,

Metallurgical and Materials Seminar, Metal Casting Technology Center, University of
Alabama, Tuscaloosa, Alabama, March 13, 1997.
380.
Finite Element Analysis of Coupled Fluid Flow and Heat Transfer, Seminar, Thermal
and Fluid Sciences, Texas A&M University, March 24, 1997.
381.
Global-Local Modeling of Laminated Plates Using Variable Kinematic Finite Elements

and Mesh Superposition, Seminar, College of Engineering, Architecture, and
Technology, Oklahoma State University, Stillwater, April 21, 1997.
382.
Thermomechanical Behavior of Functionally Graded Materials, Seminar, The Centre

for Computational Mechanics, Mechanical and Production Engineering, National
University of Singapore, June 3, 1997.
383.
Modeling Delamination Using a Layerwise Element with Enhanced Strains, (with C.

M. Dakshina Moorthy) McNU'97, Northwestern University, Evanston, IL, 29 June-July 2,
1997.
384.
On the Nonlinear Transient Thermomechanical Response of Functionally Gradient

Plates Subjected to Surface Heating, (with G. N. Praveen) McNU'97, Northwestern
University, Evanston, IL, 29 June-July 2, 1997.
385.
Buckling of Circular Plates Based on Reddy Plate Theory, (with C.M. Wang and K.H.
Lee) ASME ASIA'97 Congress and Exhibition, Singapore, September 30-October 2, 1997.
386.
Kinematic Models and Computational Procedures for the Analysis of Laminated

Composite Structures, Seminar, Department of Mechanical Engineering and Applied
Mechanics, University of Michigan, Ann Arbor, October 10, 1997.
387.
Hierarchical Computational Procedures for the Global-Local Analysis of Laminated

Composite Structures, Seminar, Department of Mechanical Engineering, University of
Delaware, Newark, October 30, 1997.
388.
On the Role of Microstructure in Modeling Inelastic Behavior of Shape Memory

Alloys, (with G. Rengarajan) IMECE'97 (1997 International Mechanical Engineering
Congress & Exposition), Dallas, November 16-21, 1997.
389.
Nonlinear Transient Thermoelastic Analysis of Functionally Graded Ceramic-Metal

Plates, (with G. N. Praveen) IMECE'97 (1997 International Mechanical Engineering
Congress & Exposition), Dallas, November 16-21, 1997.
390.
Thermoelastic Analysis of Functionally Graded Cylinders and Plates, (with G. N.

Praveen) 12th Engineering Mechanics Conference, San Diego, CA, May 17-20, 1998.
391.
On Locking-Free Finite Elements and Interdependent Interpolations, Graduate College

Seminar on Modeling and Discretization of Continua and Structures, University of Stuttgart,
Germany, June 4, 1998.
392.
Thermomechanical Analysis of Functionally Graded Materials, Graduate College

Seminar on Modeling and Discretization of Continua and Structures, University of Stuttgart,
Germany, June 8, 1998.
86
393.
A Micromechanical Study of Inelastic Behavior of Silicon, (with G. Rengarajan)

Thirteenth US National Congress of Applied Mechanics, June 21-26, 1998, University of
Florida, Gainesville, Florida.
394.
On Modeling of FGMs and Blown Films, Graduate Seminar, June 25, 1998, Department
of Engineering Science and Mechanics, Virginia Polytechnic Institute and State
University, Blacksburg, Virginia.
The following six lectures were presented at the NATO Advanced Study Institute on Mechanics of Composite
Materials and Structures, 12-24 July 1998, Tria, Portugal:
395.
Mechanics of Composite Materials".
396.
Classical and Refined Shear Deformation Theories of Laminated Plates".
397.
Linear and Nonlinear Finite Element Analysis of Composite Laminates".
398.
Hierarchical Modeling of Laminated Composite Plates".
399.
On Laminated Composite Plates with Integrated Sensors and Actuators".
400.
Thermomechanical Analysis of Functionally Graded Plates".
401.
Nonlinear Thermomechanical Analysis of Functionally Graded Plates, Seminar,

Bhabha Atomic Research Center (BARC), Trombay, India, August 3, 1998.
402.
On Timoshenko Beam Finite Elements, Seminar, Department of Mechanical

Engineering, Indian Institute of Technology, Bombay, India, August 4, 1998.
403.
Recent Developments in Computational Solid Mechanics, Seminar, Defense Research

and Development Laboratory (DRDL), Hyderabad, India, August 5, 1998.
404.
An Introduction to the Finite Element Method, Seminar, Department of Mathematics,

Bangalore University, Bangalore, India, August 10, 1998.
405.
A Nonlinear Thermomechanical Formulation of Through-Thickness Functionally

Gradient Plates , Seminar, Department of Mechanical Engineering, Indian Institute of
Science, Bangalore, India, August 11, 1998.
406.
An Alternate Derivation of the Superconvergent Timoshenko Beam Finite Element,

Seminar, Space Science and Technology Colloquia (138th Session), Indian Institute of
Science, Bangalore, India, August 12, 1998.
407.
Global-local Analysis of Composite Plates, Seminar, U.S. Army TACOM (Tank

Automotive Command), Detroit, MI, October 23, 1998.
408.
An Overview of Shear Deformation Theories and Their Relationships to the Classical

Theory, Symposium on Micromechanics and Laminate Analysis, (in honor of Dr. Nicholas J.
Pagano's 65th Birthday), IMECE'98, Anaheim, CA, Nov. 16-20, 1998.
409.
A Constitutive Model for Ferroelectric Ceramics, Symposium on Phase Transformations

and Active Composites, IMECE'98, Anaheim, CA, Nov. 16-20, 1998.
410.
On the Derivation of Locking-Free Timoshenko Beam Finite Element, Numerical

Analysis Seminar, Department of Mathematics, Texas A&M University, College Station,
Dec. 9, 1998.
411.
On Alternative Formulations of the Locking-Free Superconvergent Timoshenko Beam

Finite Element, Seminar, Institute for High Performance Computing, Singapore, January
15, 1999.
87
412.
Vibration Suppression of Magnetostrictive Beams and Plates, Seminar, Institute for

High Performance Computing, and Faculty of Engineering at National University of
Singapore, Singapore, January 25, 1999.
413.
On the Dynamic Behavior of the Locking-Free Superconvergent Timoshenko Beam

Finite Element, Seminar, Department of Civil Engineering, University of California,
Davis, February 25, 1999.
414.
A Procedure for the Recovery of Interlaminar Stresses, (with C. M. Dakshina Moorthy)

invited paper presented at 3rd National Congress on Computational Mechanics, Volos,
Greece, 24-26 June, 1999.
The following four invited lectures were presented at the Fifth SERC School on Advanced Geophysical Fluid
Dynamics, June 15-July 15, 1999, National Geophysical Research Institute, Hyderabad, India:
415.
An Introduction to the Finite Element Method, June 29, 1999.
416.
Finite Element Models of Flows of Viscous Incompressible Fluids, July 2, 1999.
417.
Vibration Suppression of Composite Laminates with Magnetostrictive Layers" (with J.

I. Barbosa), invited paper presented at International Conference on Smart Materials,
Structures and Systems, 7-10 July 1999, Indian Institute of Science, Bangalore, India.
418.
On the Penalty Function Formulation of Viscous and Viscoleastic Flows, seminar

presented at CMMS, National Aerospace Laboratories, Bangalore, India, July 9, 1999.
The following two invited lectures were presented at the Symposium on Mechanics of Composite Materials
and Structures, July 15, 1999, Departamento de Engenharia Civil and Departamento de Engenharia
Mecnica, Faculdade de Cincias e Tecnologia da, Polo II-UC, Universidade de Coimbra, Portugal:
419.
Thermomechanical Analysis of Functionally Graded Plates, July 15, 1999.
420.
Analysis of Laminated Beams and Plates with Embedded Magnetostrictive Layers,

July 15, 1999.
421.
Mindlin Plate Solutions of Functionally Graded Circular Plates, (with C. M. Wang)

Fifth U. S. National Congress on Computational Mechanics, University of Colorado, Boulder,
August 4-6, 1999.
422.
Nonlinear Finite Element Analysis of Functionally Graded Plates, Fifth U. S. National

Congress on Computational Mechanics, University of Colorado, Boulder, August 4-6, 1999.
423.
A Hierarchical Iterative Procedure for the Analysis of Composite Laminates, Fifth U.

S. National Congress on Computational Mechanics (with J.A. Mitchell), University of
Colorado, Boulder, August 4-6, 1999.
424.
Relationships Between Classical and Shear Deformation Beam and Plate Theories,
Seminar, Faculty of Mechanical Engineering, Electrical and Electronics, University of
Guanajuato (Universidad de Guanajuato), Salamanca, Mexico, October 27, 1999.
425.
Nonlinear Thermomechanical Analysis of Functionally Graded Plates, Fifth

International Meeting of Mechanical Engineering, Instituto Tecnologico de San Luis Potosi,
Mexico, October 27-29, 1999.
426.
Nonlinear Thermomechanical Analysis of Through-Thickness Graded Plates, Seminar,

Department of Mechanical Engineering, Tulane University, New Orleans, Nov 12, 1999.
427.
Development of Locking-Free Elements Using a Modified First-Order Shear

Deformation Theory of Laminated Composite Beams and Plates, paper presented at the
Symposium Honoring the 70th Birthdays of Profs. Charles W. Bert and Jack R. Vinson,
IMECE'99, Nashville, November 15, 1999.
88
428.
The Penalty Function Method in the Numerical Simulation of Viscous Incompressible

Fluids and Shear Deformable Plates, Seminar, Department of Computational Science,
National University of Singapore, 6 January 2000.
429.
Relationships Between Classical and Shear Deformation Theories for the Development
of Locking-Free Finite Elements, Workshop on Recent Research Activities in Computational
Mechanics, Center for Advanced Computation in Engineering Sciences (ACES), National
University of Singapore, 6 January 2000.
430.
Control of Composite Laminates Using Magnetostrictive Layers, Seminar, The Institute

of High Performance Computing and Singapore-MIT Alliance (SMA), National
University of Singapore, 12 January 2000.
431.
Exact Relationships Between Classical and Shear Deformation Plate Theories,

Structural Engineering Seminar Series, Department of Civil Engineering, University of
Illinois, Urbana-Champaign, 27 March 2000.
432.
Relationships Between Classical and Shear Deformation Beams and Plate Theories,
with Application to the Development of Locking-Free Finite Elements, Seminar, School
of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA, 18 April 2000.
433.
Finite Element Analysis of Film Blowing Process, Finite Elements in Fluids (with R.
Mayavaram), University of Texas at Austin, May 1-5, 2000.
434.
Recent Advances in Shear Deformation Plate Solutions: Relationships to the Classical

Plate Theory, Seminar, University of Zaragoza, Zaragoza, Spain, June 9, 2000.
435.
Vibration Control of Laminated Composite Plates and Adaptive Structures," Seminar,

Technical University of Lisbon, Portugal, June 15, 2000.
436.
Relationships between the Solutions of Shear Deformation Plate Theories and the
Classical Plate Theory," Seminar, Technical University of Lisbon, Portugal, June 15, 2000.
437.
Finite Element Analysis of Non-Isothermal Viscoelastic Fluid Using a Conformation

Tensor Model" (with Achuth Rao), Forum on Finite Element Applications in Fluid Dynamics
at the 2000 Fluids Engineering Summer Meeting, June 2000, Boston, MA.
438.
Modeling of Molecular Orientation and Phase Transition in Polymers During the Film
Blowing Process" (with Achuth Rao), ASME National Heat Transfer Conference, August
2000, Pittsburgh, PA.
439.
Bending Solutions of the Levinson Plate Theory in Terms of the Classical Plate Theory"
(with C. M. Wang and G. T. Lim), 15th Annual Technical Conference of the American Society
of Composites, September 24-27, 2000, Texas A&M University, College Station, TX.
440.
Reddy, J.N., Advances in Computational Modeling of Composite Materials and

Multiscale Computations," Seminar, Department of Mechanical Engineering,
Aeronautical Engineering and Mechanics, Rensselaer Polytechnic Institute, October 17,
2000.
441.
Vibration Control of Laminated Composite Plates Using Magnetostrictive Layers,

(with S. Krishnan) Proceedings of Adaptive Structures and Material Systems, IMECE 2000,
November 5-10, Walt Disney Dolphin, Orlando, FL, 2000.
442.
Relationships between the Solutions of Shear Deformation Plate Theories and the
Classical Plate Theory" Workshop on Structural Mechanics, December 5, 2000, National
Taiwan University, Taipei, Taiwan.
89
443.
On Health-Monitoring of Composite Structures Using Embedded Smart Layers"

Workshop on Structural Mechanics, December 5, 2000, National Taiwan University, Taipei,
Taiwan.
444.
Analysis of Shear Deformation in Plate Structures," Seminar, National Institute for

Aviation Research, Wichita State University, March 2, 2001.
445.
Recent Advances and Future Directions in Computational Modeling of Advanced

Materials, Seminar, Mechanical and Aerospace Engineering Department, North
Carolina State University, Raleigh, NC, April 2, 2001.
446.
Development of Locking-Free Beam Finite Elements, Seminar, Dipartimento di

Meccanica, Strutture, Ambiente e Territorio, University of Cassino, Cassino, Italy, April
23, 2001.
447.
Thermomechanical Modeling of Functionally Graded Plates, Seminar, Dipartimento di

Meccanica, Strutture, Ambiente e Territorio, University of Cassino, Cassino, Italy, April
24, 2001.
448.
Relationships Between Shear Deformation Theories and the Classical Theory and Their
Use in the Development of Locking-Free Finite Elements, Seminar, Dipartimento di
Meccanica, Strutture, Ambiente e Territorio (Department of Industrial Engineering),
University of Cassino, Cassino, Italy, April 24, 2001.
449.
Modeling of Materials with Special Focus on Functionally Graded Plates and Smart
Structures, Seminar, Department of Civil Engineering, University of Rome, Tor Vergata,
Italy, Rome, Italy, April 26, 2001.
450.
On Shear Deformable Finite Elements, Seminar, Department of Mechanical

Engineering, University of Zaragoza, Zaragoza, Spain, May 14, 2001.
451.
Relationships between Classical and Shear Deformable Plate Solutions, Seminar,

Departmento de Ingeniera Mecnica, Universidad Carlos III de Madrid, Madrid, Spain,
May 16, 2001.
452.
Vibration Control Of Laminated Composite Plates Using Shear Deformation Theories,

Symposium on Modeling, Testing and Damage Identification of Adaptive Composite Structures,
IDMEC/IST - Instituto Superior Tchnico, Technical University of Lisbon, P'olo I.S.T.,
Lisbon, Portugal, May 21, 2001.
453.
Canonical Forms Of The Bending Relationships between Various Shear Deformation

Theories and The Classical Plate Theory, Symposium on Modeling, Testing and Damage
Identification of Adaptive Composite Structures, IDMEC/IST - Instituto Superior Tchnico,
Technical University of Lisbon, P'olo I.S.T., Lisbon, Portugal, May 21, 2001.
454.
``Vibration Suppression of Laminated Composite Plates Using Magnetostrictive Inserts,

(with S. C. Pradhan, K. Y. Lam, T. Y. Ng, and J.N. Reddy) First MIT Conference on
Computational Mechanics, MIT, Cambridge, MA, June 2001.
455.
Modeling of Adaptive Composite Structures using Layerwise Theory, (J. E. Semedo

Garo, C. M. Mota Soares, C. A. Mota Soares and J.N. Reddy) Computational Fluid and
Solid Mechanics, Ed. K. J. Bathe, Elsevier, Amsterdam, Vol. 1, pp. 471-472, 2001.
456.
``Recent Advances in Computational Modeling of Advanced Materials, (seminar) Hong

Kong Institution of Engineers (HKIE), Civil Division, Hong Kong, June 21, 2001.
457.
`Àn Overview of Research in Modeling of Materials and Structures, seminar,

Department of Civil Engineering, National University of Singapore, July 12, 2001.
90
458.
``Recent Developments in Smart Structures, seminar, Department of Civil Engineering,

The National University of Singapore, Singapore, July 19, 2001.
459.
``Finite Element Modeling of Convective Heat Transfer with Particle Tracking, seminar,
National Geophysical Research Institute (NGRI), Hyderabad, India, July 30, 2001.
460.
``Parallel Optimization in a Structural Mechanics Code Applied to the Problem of

Fatigue in Metals: Part I, A Parallel 3D Meshless Code, (with P. Schembri and D.
Crane), Sixth U.S. National Congress on Computational Mechanics Conference (USNCCM VI),
Hyatt Regency Dearborn, Dearborn, MI, August 1-3, 2001.
461.
`Òn Least Squares Finite Element Models of Boundary Value Problems with
Applications to Plate Bending, (seminar), National University of Singapore, Singapore,
January 10, 2002.
462.
`Òn Least-Squares Finite Element Formulations of Compressible Flows, (seminar),

Institute for High Performance Computing, Singapore, January 12, 2002.
463.
``Vibration Suppression of Cross-Ply Laminated Plates with Magnetostrictive Layers,

(with F. Rostam-Abadi and S. J. Lee), 21st South Eastern Conference on Theoretical and
Applied Mechanics (SECTAM XXI), University of Central Florida, Orlando, FL, May 1921, 2002.
464.
Modelos Multi-Lmina para a Anlise de Placas Laminadas Adaptativas, (J. E.

Semedo Garo, C. M. Mota Soares, C. A. Mota Soares, J.N. Reddy) Proc. V Congreso
Mtodos Numericos en la Ingenieria, ed. J. M. Goicolea, C. A. Mota Soares, M. Pastor and G.
Bugeda, SEMINI, Espaa 2002.
465.
Modeling of Layerwise Piezolaminated Structures, (C. M. Mota Soares, C. A. Mota

Soares, J. E. Semedo Garo and J.N. Reddy) Smart Structures and Integrated Systems, ed.
By L. Porter Davies, SPIE, The International Society of Optical Engineering, Vol. 4701,
paper n. 17, 2002.
466.
``Laminated SMA Beam Finite Elements, (with S. Marfia and E. Sacco), Fifth World
Congress on Computational Mechanics (WCCM V), Vienna, Austria, July 7-12, 2002.
467.
``Modelling of Adaptive Structures Using Layerwise Finite Element Shell Model, (with
J. E. Semendo Garcao, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy), Fifth
World Congress on Computational Mechanics (WCCM V), Vienna, Austria, July 7-12, 2002.
468.
J.E. Semedo Garo, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, Modelling of
Adaptive Structures Using Layerwise Models, Proc. Sixth International Conference on
Computational Structures Technology, Ed. B. H. V. Topping and Z. Bittner, Civil-Comp
Pres, Stirling, Scotland, Paper 127, pp 1-17, 2002.
469.
R. Garcia Lage, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, Modelling of
Piezolaminated Plates Using Layerwise Mixed Finite Elements, Proc. Sixth International
Conference on Computational Structures Technology, Ed. B. H. V. Topping and Z. Bittner,
Civil-Comp Pres, Stirling, Scotland, Paper 127, pp 1-17, 2002.
470.
R. Garcia Lage, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, Mixed Layerwise
Finite Elements for the Analysis of Piezolaminated Plate Structures, Proc. Ninth Annual
International Conference on Composites Engineering, ICCE/9, Ed. David Hui, College of
Engineering, University of New Orleans, pp. 431-432, 2002.
471.
``Computational Mechanics: Present and Future, DCISSE and CSAM Colloquium Series,
University of Arkansas at Littlerock, Littlerock, AR, September 27, 2002.
91
472.
`À Computational Framework for the Analysis of Engineering Problems, Seminar (with
K.S. Surana), Wright-Patterson Air Force Base, Ohio, October 7, 2002.
473.
``Computational Models for Composite Materials, Lecture 1 in a One-Day Workshop

on Modeling of Advanced Materials and Structures, Indian Institute of Science, Bangalore,
December 9, 2002.
474.
``Theories and Analysis of Composite Plates, Lecture 2 in a One-Day Workshop on

Modeling of Advanced Materials and Structures, Indian Institute of Science, Bangalore,
December 9, 2002.
475.
`Ànalysis of Functionally Graded Plates and Laminates with Smart Material Layers,
Lecture 3 in a One-Day Workshop on Modeling of Advanced Materials and Structures,
Indian Institute of Science, Bangalore, December 9, 2002.
476.
``The k-Version of the Finite Element Method, A New Computational Technology,

Lecture 4 in a One-Day Workshop on Modeling of Advanced Materials and Structures,
Indian Institute of Science, Bangalore, December 9, 2002.
477.
``Computational Modeling of Advanced Materials and Structures, C. S. Krishnamoorthy

Memorial Lecture, Indian Institute of Technology, Madras, December 10, 2002.
478.
``Future Directions in the Computational Modeling of Materials and Structures,

Nanyang Professor Lecture, Nanyang Technological University, Singapore, December 23,
2002.
479.
``Least-Squares Finite Element Formulations of the Navier-Stokes Equations, Seminar in

Singapore-MIT Alliance (SMA) Program, National University of Singapore, Singapore,
March 13, 2003.
480.
Modelao de Estruturas Adaptativas utilizando Elementos Finitos Mistos

Multilmina, (R. Garcia Lage, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy),
Proc. VII Congresso de Mecnica Aplicada e Computacional, Ed. J. Infante Barbosa, Dep.
Fsica, Universidade de vora, Vol. II, pp. 597-606, 2003.
481.
``Mixed Plate Bending Elements Based on Least-Squares Formulation, Seminar, Institute

for High Performance Computing, Singapore, March 14, 2003.
482.
``Modeling of FGM and Smart Plate Structures and a New Computational

Methodology, Workshop on Advanced Materials, Rio de Janeiro, Brazil, June 9-13, 2003.
483.
Least Squares Finite Element Models of Laminated Composite Plates, Seminar,

IDMEC/IST, Technical University of Lisbon, Portugal, June 20, 2003.
484.
A formulation for functionally graded smart plate structures, Seminar, IDMEC/IST,

485.
``Variationally Consistent Higher-Order Global Differentiability Finite Element

Processes for Elastic Wave Propagation in Laminated Composites, (with K.S. Surana et
al) US National Congress of Computational Mechanics, Albuquerque, NM, July 27-31, 2003.
486.
`À High-Order Space-Time Coupled Least-Squares Finite Element Formulation for

Incompressible Fluid Flows, (with J. P. Pontaza) US National Congress of Computational
Mechanics, Albuquerque, NM, July 27-31, 2003.
487.
``Pollution Free Finite Element Processes for Helmholtz Equation for any Wave
Number, (with K.S. Surana et al) US National Congress of Computational Mechanics,
Albuquerque, NM, July 27-31, 2003.
92
488.
``Computational Mechanics: Present and Future, Seminar, Mechanical Engineering

Academy Seminar Series, Texas Tech University, Lubbock, Texas, October 3, 2003.
489.
``Numerical Simulations of Materials and Mechanics, Seminar, Mechanical Engineering

Department Faculty Seminar Series, Texas A&M University, College Station, Texas,
October 13, 2003.
490.
``Some Thoughts on Effective Technical Writing, Lecture presented in MEEN 689

Course on Technical Writing (taught by Ted Hartwig), Texas A&M University, College
Station, Texas, November 3, 2003.
491.
Nonlinear Thermoelastic Analysis of Functionally Graded Plates, (with W. Aliaga)

Modeling and Design of Functionally Graded Materials Symposium at International
Mechanical Engineering Conference and Exhibition (IMECE), November 17, 2003.
492.
Mechanical modeling and experimental observation of surface damage phenomena of

polymers, (with Lim, G.T., Sue, H.-J., Wong, M., Moyse A.), Proceedings of the
International Conference on Polyolefins, Houston, pp. 577-584, 2003.
493.
Scratch damage phenomena of polyolefin materials, (with M. Wong, M., Lim, G.T.,
Rood, P.R., Moyse A., and Sue, H.-J.), Proceedings of the TPOs in Automotives,
Netherlands, 2003.
494.
Mechanical modeling and surface characterization of scratch in polymers, (with G. T.

Lim, H.-J. Sue, M. Wong, and A. Moyse), Annual Technical Conference - ANTEC,
Conference Proceedings, Vol. 3, pp. 3618-3622, 2003.
495.
Mixed Layerwise Finite Element Model for the Free Vibration Analysis of
Piezolaminated Plate Structures, (R. Garcia Lage, C. M. Mota Soares, C. A. Mota Soares,
and J.N. Reddy) Proceedings ICCE/10 Tenth Annual International Conference on
Composites/Nano Engineering, ed. David Hui, University of New Orleans, New Orleans,
pp. 375-376, 2003.
496.
Novel Computational Techniques for Numerical Simulation of Flow and Deformation,

Institute Lecture, at National Institute of Technology (NIT), Warangal, India, January 1,
2004.
497.
Layerwise Mixed Finite Elements for the Analysis of Piezolaminated Plates, (R. M.
Lage, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy), Proceedings of MDP-8,
Cairo University Conference on Mechanical Design and Production, Cairo, Egypt,
January 4-6, 2004.
498.
Hierarchical Modeling of Damage in Composite Structures, (with D. H. Robbins, Jr.

and F. Rostam-Abadi), 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics, Palm Springs, CA, April 19-22, 2004.
499.
Assessment of Plastic Failure of Polymers due to Surface Scratches, (with G. T. Lim,

H.-J. Sue, and J.N. Reddy,) Annual Technical Conference, SPE, Chicago, 2004 (pp. 40444048).
500.
A New Computational Methodology for Problems of Mechanics, Seminar, Mechanical

Engineering Seminars, The Ohio State University, Columbus, May 7, 2004.
501.
On Least-Squares Based Finite Element Models for Problems of Mechanics, Seminar,

Department of Mechanical Engineering, Indiana University-Purdue University at
Indianapolis (IUPUI), Indianapolis, June 11, 2004.
93
502.
On K-version Finite Element Method for Problems of Engineering, Seminar,

Department of Mechanical Engineering, Indiana University-Purdue University at
Indianapolis (IUPUI), Indianapolis, June 11, 2004.
503.
Mechanics of Carbon Nanotube Based Composites with Molecular Dynamics and

Mori-Tanaka Methods, (with V. U. Unnikrishnan and F. Rostam-Abadi), International
Conference on Scientific and Engineering Computation, June 30th July 2, 2004, Singapore.
504.
Mechanical and Thermal Buckling of Functionally Graded Ceramic-Metal Plates,

(with R. A. Arciniega), U.S.-South America Workshop on Mechanics and Advanced Materials
in Research and Education, Rio de Janeiro, Brazil, August 3-6, 2004.
505.
Mechanics of Carbon Nanotube Based Composites with Molecular Dynamics and

Mori-Tanaka Methods, (with V. U. Unnikrishnan) U.S.-South America Workshop on
Mechanics and Advanced Materials in Research and Education, Rio de Janeiro, Brazil, August
3-6, 2004.
506.
Vibration control of composite structures using smart material layers, Seminar, China
Academy of Sciences, Railway Science and Technology & Research & Development
Center, August 30, 2004.
507.
A least-squares based computational models of problems in mechanics, Seminar,

China Academy of Sciences, Railway Science and Technology & Research &
Development Center, August 31, 2004.
508.
Relationships Between The Classical And Shear Deformation Theories, Seminar 1,

Institute of Auto-Body and Die Engineering, Jilin University, Nanling Campus,
Changchun, China, September 2, 2004.
509.
A least-squares based finite element analysis of plate and shell structures, Seminar 2,
510.
Computational modeling of advanced materials and structures, Seminar 3, Institute of

Auto-Body and Die Engineering, Jilin University, Nanling Campus, Changchun, China,
September 3, 2004.
511.
On least-squares finite element models of problems in fluid mechanics, Seminar 4,

512.
Least-squares finite element formulations for shear-deformable plates and shells,

(with J. P. Pontaza), Sixth World Congress of Computational Mechanics, Beijing, China,
September 5-9, 2004.
513.
Vibration control of composite laminates using smart material layers, (with F. RostamAbadi), Sixth World Congress of Computational Mechanics, Beijing, China, September
5-9, 2004.
514.
On Least-Squares Finite Element Models of Problems in Solid Mechanics, Seminar,

Department of Solid Mechanics, Royal Technical Institute (KTH), Stockholm, Sweden,
October 4, 2004.
515.
`Òn Least-Squares Finite Element Models of Solid and Fluid Mechanics, Seminar,
Lockheed Martin, Marietta, Georgia, October 19, 2004.
94
516.
On Least-Squares Finite Element Models of Problems in Solid Mechanics, Seminar,

Department of Solid Mechanics, Royal Technical Institute (KTH), Stockholm, Sweden,
October 4, 2004.
517.
Finite Element Models of Fluid and Solid Mechanics Problems Based on Least-Squares
Variational Principles, Seminar, Department of Civil and Materials Engineering,
University of Illinois at Chicago (UIC), Chicago, October 29, 2004.
518.
Computational Modeling of Materials and Structures, Invited lecture presented at the

US-Africa Workshop on Mechanics and Materials, University of Cape Town, South Africa,
January 24-28, 2005.
519.
A Semi-Analytical Finite Element Model for the Analysis of Laminated Axisymmetric

Shells: Static and Free Vibrations, (H. Santos, C. M. Mota Soares, C. A. Mota Soares, and
J.N. Reddy), Proc. Fifth International Conference on Composite Science and TechnologyICCST/5, Ed.A. Al Tamimi, H. El Kadi, T Ibrahim and N Qaddoumi, School of
Engineering , American University of Sharjah, UAE, February 1-3,pp. 167-172, 2005.
520.
Computational Modeling of Smart and FGM Materials and Structures, Seminar in the
Small Smart Systems Center, Department of Mechanical Engineering at University of
Maryland, College Park, May 11, 2005.
521.
Computational Models for the Analysis of Materials and Structures, Seminar presented
in Aerospace Engineering Department at the Indian Institute of Science, Bangalore,
INDIA, May 30, 2005.
522.
Computational Engineering Science Degree Program, Public Lecture presented in the

Faculty of Engineering at the National University of Singapore, Singapore, June 9, 2005.
523.
H. Santos, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy, Modelo de Elementos
Finitos Semi-Analtico para a Anlise de Cascas Laminadas Axissimetricas, Congreso de
Mtodos Numricos em Ingeniera 2005, Granada, 4 a 7 de Julio, Espaa, 2005.
524.
The k-Version of Finite Element Method for Initial Value Problems: Mathematical and
Computationa Framework, (K.S. Surana, S. Allu, and J.N. Reddy), 8th U.S. National
Congress of Computational Mechanics, University of Texas at Austin, Austin, Texas, July
25-27, 2005.
525.
On the Divergence-Free Constraint and Proper Velocity-Pressure Coupling for LeastSquares Formulations of Incompressible Flow, (J.P. Pontaza and J.N. Reddy), 8th U.S.
National Congress of Computational Mechanics, University of Texas at Austin, Austin,
Texas, July 25-27, 2005.
526.
Homogenization of an Adherent Cell Using Rule of Mixtures, (Ginu Unnikrishnan

and J.N. Reddy), 8th U.S. National Congress of Computational Mechanics, University of
Texas at Austin, Austin, Texas, July 25-27, 2005.
527.
Multiscale Analysis of Carbon Nanotube Reinforced High Density Polyethylene

Composites, (V. Unnikrishnan and J.N. Reddy), 8th U.S. National Congress of
Computational Mechanics, University of Texas at Austin, Austin, Texas, July 25-27, 2005.
528.
A Semi-Analytical Finite Element Model for The Analysis of Laminated Piezo-Electric

3D axisymmetric Cylindrical Shells, (H. Santos, C. M. Mota Soares, C. A. Mota Soares,
and J.N. Reddy), Proc. II European Conference on Adaptive Structures, ECCOMASII,Lisbon, July 18-21, 2005, Ed. By C.A. Mota Soares et al, in CD-ROM, IDMEC/IST/
Instituto Superior Tcnico.
95
529.
h, p, k Galerkin/Weak Form and Least Squares Finite Element Processes for 1-D and 2D Helmholtz Equations, (K. Surana, P. Gupta, J.N. Reddy, and P. TenPas), 8th U.S.
National Congress of Computational Mechanics, University of Texas at Austin, Austin,
Texas, July 25-27, 2005.
530.
Computational Mechanics: The Third Scientific Methodology, SixmaXi Distinguished

Scientist Lecture, Texas A&M University, Oct 26, 2005.
531.
Thermo-mechanical Analysis of Composite Under Combined Conduction Heating and

Large Deflection Bending, (with J.Y. Ju, R. J. Morgan and J.N. Reddy), Proc. of the ASME
Materials Division, Vol. 100, pp. 243-253, ASME International Mechanical Engineering
Congress and Exposition, Nov 5-11, 2005, Orlando, FL.
532.
Computational Models of Materials and Structures, Seminar presented at Indian

Institute of Technology, Madras, Chennai, India, Nov. 30, 2005.
533.
Least-squares Based Finite Element Models of Viscous Incompressible Flows, Seminar

presented at the Ramaiah School of Advanced Studies, Bangalore, India, Dec. 2, 2005.
534.
Nonlinear Analysis of Composite and Functionally Graded Shell Structures, Seminar

presented at the Indian Institute of Technology, Bangalore, India, Dec. 2, 2005.
535.
Linear and Nonlinear Analysis of Shells, Lecture delivered at the Workshop on

Computational Methods in Structural Mechanics and Fluid Flows (COSMECFLOWS),
Osmania University, Hyderabad, India, Dec 5, 2005.
536.
Least-squares Finite Element Formulations for Viscous Incompressible and

Compressible Flows, Lecture delivered at the Workshop on Computational Methods in
Structural Mechanics and Fluid Flows (COSMECFLOWS), Osmania University,
Hyderabad, India, Dec 5, 2005.
537.
A Finite Deformation Shell Formulation for the Analysis of Composite and

Functionally Graded Material Structures, Invited Lecture presented at Symposium on
Physics and Mechanics of Advanced Materials, Jan 18-20, 2006, Singapore.
538.
Role of Computational Engineering Science in Modeling of Physical Phenomena,

Invited Lecture presented at Symposium on Engineering Science, Apr 20, 2006, Singapore.
539.
A Consistent Finite Element Model for Nonlinear Analysis of Composite and

Functionally Graded Shell Structures, Opening Plenary Lecture presented at
International Conference on Composite Materials and Nano-Structures (IC2MS-06), April 2629, 2006, Shah Alam (Kaula Lumpur), Malaysia.
540.
A New Mathematical and Computational Framework for Finite Element Processes for
BVP & IVP Based on h, p, k, Seminar presented at the Army Research Office, Research
Triangle Park, NC, May 10, 2006.
541.
Nonlinear Analysis of Composite and FGM Shell Structures Using Tensor-Based Shell
Elements, III European Conference on Computational Mechanics, Solids, Structures and
Coupled Problems in Engineering, C.A. Mota Soares et al. (eds.), Lisbon, Portugal, June 5-8,
2006.
542.
Mixed Finite Elements based on Least-Squares Formulation for the Static Analysis of
Laminated Composite Plates, (F. Moleiro, C. M. Mota Soares, C. A. Mota Soares, and
J.N. Reddy), III European Conference on Computational Mechanics, Solids, Structures and
Coupled Problems in Engineering, C.A. Mota Soares et al. (eds.), Lisbon, Portugal, June 5-8,
2006.
96
543.
H. Santos, C.M. Mota Soares, C.A. Mota Soares, and J.N. Reddy, A Finite Element
Model for the Analysis of 3D Axisymmetric Laminated Shells with Embedded
Piezoelectric Sensors and Actuators, III European Conference on Computational Mechanics:
Solids, Structures and Coupled Problems in Engineering, C.A. Mota Soares et al. (eds.),
Lisbon, Portugal, 5-8 June 2006.
544.
F. Moleiro, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, Mixed least-squares finite
element model for the static analysis of laminated composite plates", in C.A. Mota
Soares et al., (Editors), Proceedings of the III European Conference on Computational
Mechanics: Solids, Structures and Coupled Problems in Engi-neering (CD-ROM), Paper 1508,
LNEC, Lisbon, Portugal, 5-8 June, 2006.
545.
H. Santos, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy, A Three Dimensional
Semi-Analytical Finite Element Model for the Analysis of Piezoelectric Shells of
Revolution, Proceedings of the Eight International Conference on Computacional Structures
Technology(CD-ROM), Ed. B.H.V. Topping, G. Montero and R. Montenegro, Civil-Comp
Press , Stirlingshire, Scotland, Paper 105, pp 1-18, 2006.
546.
Finite Element Simulations in Structures and Beyond, Lecture presented at Institution

of Engineers Singapore (IES), IStructE Joint Committee (Singapore Division) on July 6,
2006.
547.
Nonlinear Analysis of Functionally Graded Shell Structures Using Tensor-Based Shell

Element, Key Note Lecture, 5th International Conference on Mechanics and Materials in
Design (M2D2006), Porto, Portugal, July 24-26, 2006.
548.
On Nonlinear Analysis of Composite and Functionally Graded Shell Structures,

Invited Lecture, Tenth East Asia Pacific Conference on Structural Engineering and
Construction, August 2-4, 2006, Bangkok, Thailand.
549.
Computational Models of Viscous Flows and Shell Structures, Invited Lecture,

International Conference on Enhancement and Promotion of Computational Methods in
Engineering Science and Mechanics (CMESM 2006), Changchun, China, Aug 10-12, 2006.
550.
C. M. Mota Soares, H. Santos, C. A. Mota Soares, and J.N. Reddy, A Semi-Analytical

Finite Element Model for the Analysis of Piezoelectric Cylindrical Shells, Proc. Smart
Structures and Materials 2006: Modeling, Signal Processing, and Control, Ed. By D.K.
Lindner, Proc. SPIE, Vol. 6166, 61661 Q-1-8, 2006.
551.
A Tensor-Based Element for Nonlinear Analysis of Shell Structures, Seminar,

Department of Mechanical and Materials Engineering at Univerisiti Kebangsaan
Malaysia (UKM), August 28, 2006.
552.
Simulation-Based Computational Engineering Science, Seminar, Engineering Science

Programme, National University of Singapore, August 25, 2006.
553.
Nonlinear Analysis of Shell Structures using Tensor-Based Shell Finite Element,

Seminar, School of Civil and Environmental Engineering, Cornell University, Ithaca,
Sept. 5, 2006.
554.
F. Moleiro, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, A mixed finite element
model based on least-squares formulation for the static analysis of laminated composite
plates, in B.H.V. Topping, G. Montero, R. Montenegro, (Editors), Proceedings of the
Eighth International Conference on Computational Structures Technology, Civil-Comp Press,
Stirlingshire, UK, Paper 106, Las Palmas de Gran Canaria, Spain, 12-15 September, 2006.
97
555.
J.N. Reddy, Numerical Simulation-Based Engineering Science: The Third Scientific

Methodology, Public Lecture presented on behalf of the National University of
Singapore at Woodlands Public Library, September 23, 2006.
556.
J.N. Reddy, Nonlinear Analysis of Composite and FGM Shell Structures Using TensorBased Shell Elements, International Workshop in Mechanics of Composites, Bad Herrenab,
Germany, November 26-29, 2006.
557.
J.N. Reddy, Forty Years of Significant Developments in Mechanics of Composite

Materials and Structures" Special Invited lecture, International Workshop in Mechanics of
Composites, Bad Herrenab, Germany, November 26-29, 2006.
558.
J.N. Reddy, Computational Engineering Science: The Third Scientific Methodology for
the 21st Century and Beyond, B. R. Seth Memorial Lecture at the 51st Congress of Indian
Society of Theoretical and Applied Mechanics (ISTAM), December 18-21, 2006, Andhra
University, Visakhapatnam, INDIA.
559.
H. Santos, C.M. Mota Soares, C.A.Mota Soares, J.N. Reddy, A Semi-Analytical Finite
Element Model for the Analysis of Cylindrical Shells Made of Functionally Graded
Materials, Sixth International Conference on Composite Science and Technology, Durban,
South Africa, 22-24 January 2007.
560.
J.N. Reddy, On the k-Version Least-Squares Finite Element Models of Problems in

Mechanics, Graduate Aeronautics Engineering Seminar, California Institute of Technology,
Pasadena, CA, March 9, 2007.
561.
J.N. Reddy, The Finite Element Method in Structures and Beyond, SPDC ASME USB
(Student Professional Development Conference), University of Simon Bolivar, Caracas,
Venezuela, May 9-13, 2007.
562.
J.N. Reddy, Least-squares Based Finite Element Formulations for Newtonian and nonNewtonian Fluid Flows, (with V. Prabhakar) paper presented in Computational
Methodologies for Navier-Stokes and Turbulence session, at McMat 2007, ASME Applied
Mechanics and Materials Conference, June 3-7, 2007, University of Texas at Austin, Austin,
Texas.
563.
J.N. Reddy, Coupled Blood Arterial Wall Analysis Using Fluid Biphasic Interface
Models (with Ginu Unnikrishnan and Vinu U Unnikrishnan), Keynote Lecture
presented in Mechanics of Nano-, Bio- and Cellular Materials session at McMat 2007, ASME
Applied Mechanics and Materials Conference, June 3-7, 2007, University of Texas at
Austin, Austin, Texas.
564.
Vinu U. Unnikrishnan, Ginu Unnikrishnan, J.N. Reddy, and C.T. Lim, Mechanical
Analysis of Polymeric Nanofibers Using Multiscale Methods, paper presented in
Mechanics of Nano-, Bio- and Cellular Materials session at McMat 2007, ASME Applied
Mechanics and Materials Conference, June 3-7, 2007, University of Texas at Austin,
Austin, Texas.
565.
J.N. Reddy, Nonlinear Analysis of Composite and FGM Shells using Tensor-Based
Finite Elements, (with R. A. Arciniega) The Fifth International Conference on Nonlinear
Mechanics (ICNM-V), June 11-14, 2007, Shanghai University, Shanghai, China.
566.
J.N. Reddy, Locking-Free Nonlinear Shell Finite Element, Seminar, Department of

Aerospace Engineering and Engineering Mechanics, Tongji University, Shanghai, China,
June 13, 2007.
98
567.
J.N. Reddy, Engineering Science: Educating Engineer-Scientists, Invited Lecture

presented on the occasion of the appointment of Consultant Professor at South China
University of Technology, Guangzhou, June 14, 2007.
568.
J.N. Reddy, Role of Engineering Science in Education with Special Focus on Modeling
of Nanosystems, Invited Lecture presented in Teaching Nanoscience and Nanoengineering
at International Conference on Materials for Advanced Technologies 2007, 1-6 July 2007,
Suntec Singapore International Convention and Exhibition Centre, Singapore.
569.
J.N. Reddy, Continuum Modelling of the Cell, invited lecture (with G.U.
Unnikrishnan) presented at Second GEM4 Summer School on Cell and Molecular Mechanics
in Biomedicine with a focus on cancer (in connection with the GEM4 Conference on Cancer
2007), June 25-July 6, 2007, National University of Singapore.
570.
H. Santos, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy, Development of A

Semi-Analytical Model For the Analysis of Axisymmetric Shells Made of Functionally
Graded Materials,Proceedings of the 15th Annual International Conference on
Composites/Nano Engineering, Haikou, Hainan, China, July 15-21, 2007.
571.
J.N. Reddy, A New Mathematical and Computational Framework for BVP and IVP,
Key Note Lecture (with K.S. Surana and A. Romkes), The k-Version of the Finite Element
Method and h-p-k Adaptive Processes at the 9th US National Congress on Computational
Mechanics, San Francisco, CA, July 22-26, 2007.
572.
R. A. Arciniega and J.N. Reddy, Thermomechanical Modeling of Functionally Graded

Shells, in Computational Solid Mechanics: Recent Advances at the 9th US National Congress
on Computational Mechanics, San Francisco, CA, July 22-26, 2007.
573.
Wookjin Na and J.N. Reddy, Multiscale Damage Analysis of Beam Bending Using
Layerwise Theory, in Computational Solid Mechanics: Recent Advances at the 9th US
National Congress on Computational Mechanics, San Francisco, CA, July 22-26, 2007.
574.
A. Romkes, Tyler Stone, K.S. Surana, and J.N. Reddy, A Priori Error Estimation for hpk
FE Analyses, The k-Version of the Finite Element Method and h-p-k Adaptive Processes at the
9th US National Congress on Computational Mechanics, San Francisco, July 22-26, 2007.
575.
S. Allu, K.S. Surana, and J.N. Reddy, Computations of Viscous Compressible Flows in
h, p, k Framework, in the session The k-Version of the Finite Element Method and h-p-k
Adaptive Processes at the 9th US National Congress on Computational Mechanics, San
Francisco, CA, July 22-26, 2007.
576.
A. Dumbre, R. Romkes, K.S. Surana, and J.N. Reddy, A Mathematical Model and
Computational Approach for Fluid- Solid Interaction, in the session The k-Version of the
Finite Element Method and h-p-k Adaptive Processes at the 9th US National Congress on
Computational Mechanics, San Francisco, CA, July 22-26, 2007.
577.
S. Basaran, A. Romkes, K.S. Surana, and J.N. Reddy, h, p, k Computational Framework

for Solid Continuum using Eulerian Description, (with) in the session The k-Version of
the Finite Element Method and h-p-k Adaptive Processes at the 9th US National Congress on
578.
S. Allu, K.S. Surana, and J.N. Reddy, A New Computational Framework for Numerical
Solutions of Polymer Flows for High Deborah Numbers, in the session The k-Version of
the Finite Element Method and h-p-k Adaptive Processes at the 9th US National Congress on
99
579.
R. Maduri, K.S. Surana, and J.N. Reddy, Higher Order Global Differentiability Local
Approximations for Triangular Elements, (with) in the session The k-Version of the Finite
Element Method and h-p-k Adaptive Processes at the 9th US National Congress on
580.
F. Moleiro, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, New developments on
mixed least-squares finite element models for laminated composite plates: static and free
vibration analysis, Proceedings of the 9th US National Congress on Computational Mechanics
(CD-ROM), Paper 131, San Francisco, California, EUA, 22-26 July, 2007.
581.
J.N. Reddy, A General Introduction to the Finite Element Method, lecture presented in
the Pre-International Conference Workshop on Advanced Finite Element Method and
Computational Techniques (ASFCT-2007), Manipal Institute of Technology, Manipal,
India, August 29, 2007.
582.
J.N. Reddy, Least Squares Finite Element Models of Bars, Beams, Plates and Shells,
lecture presented in the Pre-International Conference Workshop on Advanced Finite Element
Method and Computational Techniques (ASFCT-2007), Manipal Institute of Technology,
Manipal, India, August 29, 2007.
583.
J.N. Reddy, Tensor-Based Shell Element and Modeling of Biological Cells, Plenary
Lecture, the International Conference on Recent Developments in Structural Engineering
(RDSE-2007), Manipal Institute of Technology, Manipal, India, 30 August 1 September,
2007.
584.
J.N. Reddy, On Least-Squares Finite Element Models of Problems in Mechanics,

Mechanical Engineering Seminar, Department of Mechanical Engineering, University of
Wyoming, Laramie, September 24, 2007.
585.
J.N. Reddy, Simulation Based Computational Engineering Science: Least-Squares

FEM, Lindberg Lecture Series, Department of Mechanical Engineering, University of
Wisconsin, Madison, September 27, 2007.
586.
J.N. Reddy, A Shell Finite Element for the Nonlinear Analysis of Composite and
Functionally Graded Structures, seminar, Department of Mechanical and Aerospace
Engineering, University of Alabama, Tuscaloosa, October 4, 2007.
587.
J.N. Reddy, A Tensor-Based Shell Element and Modeling of Biological Cells, Seminar,
School of Mechanical Engineering, Purdue University, W. Lafayette, Nov. 15, 2007.
588.
Functionally Graded Structures, seminar, Mechanics and Life Prediction Branch, NASA
Glenn Research Center, Cleveland, Ohio, November 16, 2007.
589.
J.N. Reddy, Least-Squares Finite Element Models of Problems in Fluid and Solid
Mechanics, seminar, Turbomachinery and Propulsion Division, NASA Glenn Research
Center, Cleveland, Ohio, November 16, 2007.
590.
J. Ju, R. J. Morgan, T. S. Creasy, J. Jeon , and J.N. Reddy, "Development of a

Multifunctional Evaporative Surface Cooling System to Minimize Infrared Detection," in
a session on Transport Properties of Micro-Structured Media and Composite Materials,
the 44th Annual Technical Meeting of the Society of Engineering Science, Texas A&M
University, College Station, October 2007.
100
591.
Functionally Graded Structures, Seminar, Department of Mechanical Engineering,
Erciyes University, Kayseri, Turkey, October 17, 2007.
592.
J.N. Reddy, On Least-Squares Finite Element Models of Problems in Mechanics,

Seminar, Department of Mechanical Engineering, Erciyes University, Kayseri, Turkey,
October 18, 2007.
593.
J.N. Reddy, Mechanical Engineering Education at Texas A&M University, Seminar,

Department of Mechanical Engineering, Erciyes University, Kayseri, Turkey, October 18,
2007.
594.
F. Moleiro, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, New developments on
mixed least-squares finite element models for laminated composite plates: static and free
vibration analysis, in I.H. Marshall (Editor), Proceedings of the 14th International
Conference on Composite Structures, Melbourne, Australia, 19-21 November, 2007.
595.
J.N. Reddy, A First-Order Shell Theory with Thickness Stretch and Locking-Free Shell
Finite Element, Opening Plenary Lecture and (and Chief Guest), International Conference
on Computer Aided Engineering, December 13-16, 2007, Indian Institute of TechnologyMadras, Chennai, India.
596.
H. Santos, C.M. Mota Soares, C.A. Mota Soares, and J.N. Reddy, Recent Developments
on the Modeling of Piezolaminated Cylinders by the Semi-Analytical Finite Element
Method, Proc. Progress in Computational Mechanics in honour of Professor Arantes e Oliveira
73rd Birthday, (Eds.) E. Stein, V. Leito, C.A. Duarte, Published by ICIST-IST: 151-164,
December 2007.
597.
Albert Romkes, Karan S. Surana, Tyler M. Stone, and J.N. Reddy, Error Estimation for
the k-Version of the Finite Element Method, International Conference on Multiscale
Modelling and Simulation, Indian Institute of Science, Bangalore, January 2-4, 2008.
598.
K.S. Surana, Albert Romkes, and J.N. Reddy, A New Mathematical and Computational
Framework for BVP and IVP, International Conference on Multiscale Modelling and
Simulation, Indian Institute of Science, Bangalore, January 2-4, 2008.
599.
K.S. Surana, S. Allu, and J.N. Reddy, Computations of Viscous Compressible flows in
h,p,k framework, International Conference on Multiscale Modelling and Simulation, Indian
Institute of Science, Bangalore, January 2-4, 2008.
600.
Unnikrishnan, V. U., G.U. Unnikrishnan, and J.N. Reddy, "Multiscale Multiphysical

Modeling Of Biomaterial and Nutrient Transport In Tissue Engineering," International
Conference on Multiscale Modeling and Simulation, 2-4 January 2008, Bangalore, India.
601.
N. Singh, V. U. Unnikrishnan, D. Banerjee, and J.N. Reddy, Multiscale Analysis of

Transient Thermal Interfacial Resistance between CNT Nanofins and Various Fluids,
International Conference on Multiscale Modelling and Simulation, Indian Institute of Science,
Bangalore, January 2-4, 2008.
602.
J.N. Reddy, On Least-Squares Finite Element Models of Problems in Fluid and Solid
Mechanics, seminar, University of Calabria, Cosenza, Italy, March 11, 2008.
603.
J.N. Reddy, On Least-Squares Finite Element Models: A Critical Assessment, AFOSR

seminar, Air Force Institute of Technology, Wright-Patterson Air Force Base, Ohio, March
17, 2008.
101
604.
J.N. Reddy, Nonlinear Response Using a Simultaneous, Coupled Least-Squares Finite

Element Formulation for Fluid-Structure Interaction (by Cody Rasmussen, R. A.
Canfield, and J.N. Reddy), Proceedings of the 49th AIAA/ASME/ASCE/ASC Structures,
Structural Dynamics, and Materials Conference, 7-10 April 2008, Schaumburg, IL, AIAA
Paper 2008-1821.
605.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Computational Modeling of

Glucose Distribution in Hollow Fiber Membrane Bioreactors, The Mechanics Conference
to Celebrate the 100th Anniversary of the Department of Engineering Science and Mechanics,
Blacksburg, Virginia, 28-30 May, 2008.
606.
J.N. Reddy, On the K-version of the finite element method with applications to solid
mechanics, Seminar, IDMEC/IST, Technical University of Lisbon, Portugal, June 18,
2008.
607.
J.N. Reddy, Modelling of biological cells and soft tissues, Seminar, IDMEC/IST,
608.
J.N. Reddy, Nonlinear Analysis of Shell Structures Using a Refined Shell Element,
Seminar, Department of Structural Engineering, University of Cassino, Cassino, Italy, 23
June, 2008.
609.
A Refined Shell Element for the Nonlinear Analysis of Composite and FGM Shells,
Seminar, Department of Structural Engineering, University of Rome II, Rome, Italy, 24
June, 2008.
610.
J.N. Reddy, Nonlinear Analysis of Composite and Functionally Graded Shells,

Seminar, Department of Civil and Structural Engineering, University of Salerno, Salerno,
Italy, 26 June, 2008.
611.
J.N. Reddy, On Least-Squares Finite Element Models of Solid and Fluid Mechanics,
Seminar, Department of Civil and Structural Engineering, University of Salerno, Salerno ,
Italy, 27 June, 2008.
612.
H. M. Ma, X.-L. Gao, and J.N. Reddy, A new Timoshenko beam model based on a
modified couple stress theory, the 8th World Congress on Computational Mechanics
(WCCM8), Venice, Italy, June 30 - July 4, 2008.
613.
F. Moleiro, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, A layerwise mixed leastsquares finite element model for static analysis of multilayered composite plates, in
B.H.V. Topping, M. Papadrakakis, (Editors), Proceedings of the Ninth International
Conference on Computational Structures Technology, Civil-Comp Press, Stirlingshire, UK,
Paper 5, Athens, Greece, 2-5 September, 2008.
614.
N. Singh, V. U. Unnikrishnan, J.N. Reddy, and D. Banerjee, "Molecular Dynamics

Simulation of Interfacial Thermal Resistance of Nano-Fins, 3rd Energy Nanotechnology
International Conference, 10-14, August, 2008, Jacksonville, Florida.
615.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, "Multiscale Biomechanical

Analysis of Uterine Tissue, 23rd Annual Technical Conference on Composite Materials,
American Society of Composites, 9-11 September 2008, Memphis, Tennessee.
616.
Cody Rasmussen, R. A. Canfield, and J.N. Reddy, Advantages and Disadvantages of a

Simultaneously Couples Least-Squares Finite Element Formulation for Fluid-Structure
Interaction, Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and
102
Optimization Conference, 10-12 September 2008, Victoria, British Columbia, Canada,

AIAA Paper 2008-5859 (24 pages).
617.
K.S. Surana and J.N. Reddy, Least-Squares Finite Element Technology for the Solution
of Fluid Dynamics Problems, NASA John H. Glenn Research Center, Cleveland, Ohio,
Sep 28, 2008.
618.
Douglas P. Wickert, R. A. Canfield, and J.N. Reddy, Continuous Sensitivity Analysis of

Fluid-Structure Interaction Problems using Least Squares Finite Elements, Proceedings of
the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10-12
September 2008, Victoria, British Columbia, Canada, AIAA Paper 2008-5931 (14 pages).
619.
J.N. Reddy, On Least-Squares Finite Element Formulations with Applications to

Problems in Fluid and Solid Mechanics, Seminar in the Department of Mechanical
Engineering, University of Minnesota, Minneapolis-St. Paul, 19 November, 2008.
620.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Multiscale Computational

Analysis of Biomechanical Systems, IUTAM Symposium on Multi-Functional Material
Structures and Systems, Indian Institute of Science, Bangalore, India, 1013 December,
2008.
621.
J.N. Reddy, Nonlinear Analysis of Composite and FGM Structures by a Refined

Continuum Shell Element, Seminar, Thapar Centre for Industrial Research and
Development, Thapar Technology Campus, Thapar University, Patiala, Punjab, India, 15
Dec 2008.
622.
J.N. Reddy, Nonlinear Analysis of Structures by Refined Continuum Shell Element,

Seminar, Department of Earthquake Engineering, Indian Institute of Technology,
Roorkee, Uttaranchel, India, Dec 18, 2008.
623.
J.N. Reddy, The Finite Element Method: A Powerful Numerical Analysis Tool,
Seminar, Sreenidhi Institute of Science and Technology, Gatkesar, Hyderabad, Dec. 22,
2008.
624.
K.S. Surana, Y. T. Ma, A. Romkes, and J.N. Reddy, Fluid-Solid Interaction of

Incompressible Media in h, p, k Mathematical and Computational Framework
International Conference on Computational Methods in Engineering and Sciences, January 810, 2009, Hyderabad, India.
625.
K.S. Surana, A. Stone, A. Romkes, and J.N. Reddy, Adaptivity in Finite Element
Processes in h, p, k Mathematical and Computational Framework, International
Conference on Computational Methods in Engineering and Sciences, January 8-10, 2009,
Hyderabad, India.
626.
D. Nunez, K.S. Surana, J.N. Reddy, and A. Romkes, J-Integral Computations for Mode I
Linear Elastic Fracture in h, p, k Framework, International Conference on Computational
Methods in Engineering and Sciences, January 8-10, 2009, Hyderabad, India.
627.
J.N. Reddy, Nonlinear Analysis of Shell Structures using a Refined Shell Finite
Element, Seminar in the Department of Building and Construction, City University of
Hong Kong, 12 Jan 2009.
628.
J.N. Reddy, Nonlinear Analysis of Laminated Composite Structures using a Refined

Shell Finite Element, Seminar in the School of Civil and Environmental Engineering,
Georgia Institute of Technology, Atlanta, Feb 27, 2009.
103
629.
J.N. Reddy, Analysis of Composite and FGM Shells using a Refined Shear Flexible Shell
Finite Element, The Bert Lecture, School of Aerospace and Mechanical Engineering,
University of Oklahoma, Norman, OK, March 6, 2009.
630.
J.N. Reddy, Nonlinear Analysis of Composite and FGM Shells using a Novel Shell
Finite Element, Seminar in the Department of Civil Engineering, Vanderbilt University,
Nashville, TN, March 9, 2009.
631.
J.N. Reddy, Modeling and Simulation of Complex Structures: from Physical to

Biological Systems, The 2009 Landis-Epic Lecture (presented once in 5 years) Department
of Civil and Environmental Engineering, University of Pittsburgh, Pittsburgh, March 20,
2009.
632.

Shell Finite Element, Distinguished Lecture Series, College of Engineering, West Virginia
University, Morgantown, WVA, March 27, 2009.
633.
Douglas P. Wickert, Robert A. Canfield, and J.N. Reddy, Least-Squares Continuous

Sensitivity Shape Optimization for Structural Elasticity Applications, AIAA, ASME,
ASC Structures, Structural Dynamics, and Materials Conference, Florida, April 2009.
634.
F. Moleiro, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, Layerwise mixed leastsquares finite element models for static and free vibration analysis of multilayered
composite plates, in A.J.M. Ferreira (Editor), Proceedings of the 15th International
Conference on Composite Structures (CD-ROM), Paper 194, FEUP, Porto, Portugal, 15-17
June, 2009.
635.
J.N. Reddy, Least-Squares Finite Element Models of Fluid and Solid Mechanics
Problems, seminar at University of Parma, Parma, June 15, 2009, 2009.
636.
J.N. Reddy, Relationships between Classical and Shear Deformation Theories of

Plates, Department of Civil Engineering, University of Rome II, TorVergata, Rome,
Italy, June 23, 2009.
637.
J.N. Reddy, On a Critical Review of Least-Squares Finite Element Models, seminar in

Department of Civil Engineering University of Salerno, Fisciano, ITALY, 25 June 2009.
638.
J.N. Reddy, Novel Computational Approaches for Problems in Mechanics, seminar in

Department of Civil Engineering University of Salerno, Fisciano, ITALY, 29 June 2009.
639.
F. Moleiro, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, Analysis of multilayered
composite plates by layerwise mixed least-squares finite element models, in J.A.C.
Ambrsio, M.P.T. Silva (Editors), Proceedings of the 7th EUROMECH Solid Mechanics
Conference, Paper 938, IST, Lisbon, Portugal, 7-11 September, 2009.
640.
J.N. Reddy, Role of Computational Mechanics in Engineering Analysis and Design,

Seminar in the Mechanical Engineering Program, Texas A&M University at Qatar, Doha,
Qatar, October 12, 2009.
641.
J.N. Reddy, Romn A. Arciniega and C. M. Wang, Recent Developments in the

Analysis of Carbon Nanotubes and Nonlinear Shell Theories, the 9th Conference on Shell
Structures, Theory and Applications, Gdask-Jurata, Poland, 14-16, October 2009.
642.
N. Singh, V. U. Unnikrishnan, J.N. Reddy, and D. Banerjee, Molecular Dynamics

Simulation of Interfacial Thermal Resistance of Nanofins, 2008 Proceedings of 3rd Energy
Nanotechnology International Conference, ENIC 2008, Pages 123-127, 2009.
104
643.
J.N. Reddy, Structural Theories for the Analysis of Laminated Composite Plates: An
Overview, Seminar in the Departamento de Engenharia Mecatrnica e de Sistemas
Mecnicos, Escola Politcnica da Universidade de So Paulo, So Paulo, BRAZIL, 4
November 2009.
644.
J.N. Reddy, Least-Squares Finite Element Models of Problems in Solid Mechanics,

Seminar in the Departamento de Engenharia Mecatrnica e de Sistemas Mecnicos,
Escola Politcnica da Universidade de So Paulo, So Paulo, BRAZIL, 5 November 2009.
645.
J.N. Reddy, Least-Squares Finite Element Models for Flows of Viscous Incompressible
Fluids, Seminar in the Departamento de Engenharia Mecatrnica e de Sistemas
Mecnicos, Escola Politcnica da Universidade de So Paulo, So Paulo, BRAZIL, 6
November 2009.
646.
J.N. Reddy ,Nonlinear Analysis of Laminated Composite Structures Using a Refined

Shell Finite Element, Seminar in the Departamento de Engenharia Mecatrnica e de
Sistemas Mecnicos, Escola Politcnica da Universidade de So Paulo, So Paulo,
BRAZIL, 11 November 2009.
647.
J.N. Reddy, Least-Squares Finite Element Models of Fluid and Solid Mechanics
Problems, seminar presented in Distinguished Lecture Series in Structural Engineering and
Mechanics, University of California, Los Angeles, March 2, 2010.
648.
J.N. Reddy, Theories and Computational Models for the Analysis of Composite
Materials and Structures, Seminar presented in the Mechanical Engineering Program at
Texas A&M University, Qatar, March 17, 2010.
649.
J.N. Reddy, Mechanics Modelling of Shell Structures and Biological Cells, Seminar
presented in the Biomedical Engineering Department at Florida International University,
Miami, Florida, on April 2, 2010.
650.

Shell Finite Element, Seminar presented in the School of Engineering, University of
Western Sydney, Penrith, NSW, Australia, July 16, 2010.
651.
J.N. Reddy, K.S. Surana, and G. S. Payette, Least-Squares Finite Element Technology
in Fluid Dynamics and Structural Mechanics, 9th World Congress of Computational
Mechanics (WCCM) and 4th Asian Pacific Conference on Computational Mechanics (APCOM),
July 19-23, 2010, Sydney, Australia.
652.
Ramin Aghababaei, Shailendra S. Joshi, J.N. Reddy, A Non-local Continuum Crystal

Plasticity Framework with Energetic and Dissipative Hardening, 9th World Congress of
Computational Mechanics (WCCM) and 4th Asian Pacific Conference on Computational
Mechanics (APCOM), July 19-23, 2010, Sydney, Australia.
653.
Douglas Wickert, Robert Canfield, and J.N. Reddy, Continuous Sensitivity Analysis of
Fluid-Structure Interaction Problems Using Least-Squares Finite Elements, AIAA Paper
2008-5931 (selected as the 2008 AIAA Best Paper by the AIAA Multidisciplinary Design
Optimization Technical Committee), 13th AIAA/ISSMO Multidisciplinary Analysis
Optimization Conference, Renaissance Worthington Hotel, Fort Worth, Texas, 13 - 15 Sep
2010.
654.
R. Gunes,M. K. Apalak, M. Aydin, and J.N. Reddy, Low-Velocity Impact Behavior of

Functionally Graded Circular Plates, 11th International Symposium on Multiscale,
105
Multifunctional, and Functionally Graded Materials, 26-29 September 2010, Guimares,

Portugal.
655.
M. K. Apalak, R. Gunes, M. Aydin, and J.N. Reddy, Impact Performance of Al/SiC

Functionally Graded Circular Plates, 11th International Symposium on Multiscale,
Multifunctional, and Functionally Graded Materials, 26-29 September 2010, Guimares,
Portugal.
656.
J.N. Reddy, Nonlinear Analysis of Laminated Composite and Functionally Graded

Structures, Seminar presented in the Department of Aerospace Structures, TU Delft
(Technical University of Delft), Delft, The Netherlands, Dec 8, 2010.
657.
V. U. Unnikrishnan, G.U. Unnikrishnan, and J.N. Reddy, Thermo-Mechanical Analysis

of Nano-Graphene Based Systems, International Conference on Multiscale Modelling and
Simulation (Nano-, Micro-, and Macro-Mechanics of Materials and Systems), 17-19
December 2010, Guangzhou, China.
658.
J. V. Arajo dos Santosa and J.N. Reddy, A Model for Free Vibration Analysis of
Timoshenko Beams with Couple Stress Effects, International Conference on Multiscale
Modelling and Simulation (Nano-, Micro-, and Macro-Mechanics of Materials and
Systems), 17-19 December 2010, Guangzhou, China.
659.
K.S. Surana, Y. T. Ma, J.N. Reddy, and A. Romkes, Development of Mathematical

Models for Multi-physics Interaction Processes, International Conference on Multiscale
Modelling and Simulation (Nano-, Micro-, and Macro-Mechanics of Materials and
Systems), 17-19 December 2010, Guangzhou, China.
660.
J.N. Reddy, A Robust Shell Finite Element for Nonlinear Analysis of Composite and
Functionally Graded Shells, Seminar, GE Global Research, Bangalore, India, January 6,
2011.
661.
J.N. Reddy, Least-Squares Finite Element Models of Problems of Fluids and Solids,
Seminar, Centre of Mathematics, University of Minho, Guimares, Portugal - 30 June
2011.
662.
J.N. Reddy, V. U. Unnikrishnan, and R. Arciniega, Analysis of Composite and

Multifunctional Materials: Recent Developments, Proceedings of the International
Symposium on Advances in Applied Mechanics and Modern InformationTechnology 2011
(AAM&MIT'11), pp. 22-46, Special edition of The Scientific and Pedgogical News of
Odlar Yurdu University, Baku , Azerbaijan, 2011.
663.
J.N. Reddy, Analogies in Structural Mechanics: Relationships between Solutions of

Various Theories, Seminar, Department of Civil Engineering, University of Houston,
October 12, 2011.
664.
J.N. Reddy, Multisacale Processes in Analysis of Nanotube Reinforced Engineering

Bioreactors, Distinguished Speaker Seminar, School of Mechanical and Aerospace
Engineering, Oklahoma State University, Stillwater, October 13, 2011.
665.
J.N. Reddy, A Shell Finite Element for Nonlinear Analysis of Multifunctional

Structures, Seminar, Department of Mechanical Engineering, University of Washington,
October 18, 2011.
666.
J.N. Reddy, Spectral/hp Finite Elements for Nonlinear Analysis of Shells and Viscous
Fluids, Seminar, Department of Mechanical Engineering and Materials Science, Duke
University, Durham, North Carolina, October 27, 2011.
106
667.
K.S. Surana and J.N. Reddy, Constitutive Theories in Lagrangian and Eulerian
Descriptions for Finite Deformation of Thermoelastic Solids, Fourth Internatioal
Conference on Structural Stability and Dynamics, Malvia National Institute of Technology,
Jaipur, India, 4-6 January 2012.
668.
K.S. Surana and J.N. Reddy, h,p,k Finite Element Processes for Linear and Non-Linear
BVPs and IVPs in Solid and Structural Mechanics, Fourth Internatioal Conference on
Structural Stability and Dynamics, Malvia National Institute of Technology, Jaipur, India,
4-6 January 2012.
669.
V. Vallala, A. Ruimi, and J.N. Reddy, Viscoelastic Analysis of Beams Using a General
Third-Order Theory with The Von Krmn Nonlinear Strains, Fourth Internatioal
Conference on Structural Stability and Dynamics, Malvia National Institute of Technology,
Jaipur, India, 4-6 January 2012.
670.
J.N. Reddy, A General Nonlinear Third-Order Theory of Functionally Graded Plates,

Colloquium: Advances in Computational Science, Engineering, and Mathematics, January 1920, 2012, University of Texas at Austin, Austin.
671.
J.N. Reddy, The Finite Element Method: A Powerful Computational Tool for Numerical
Simulations, Seminar, 25th Anniversary of PhD program in MEDICIS, Universidad de
Guanajuato, Apartado Postal 215A, Salamanca, Gto., 36730, MEXICO
672.
J.N. Reddy, Numerical Simulations: The Third Scientific Methodology, Plenary

Lecture, Pragyan 2012, National Institute of Technology, Trichy, India, 23-26 February,
2012.
673.
J.N. Reddy, Spectral/hp Finite Elements for Nonlinear Analysis of Shells and Viscous
Fluids, Seminar, Department of Mechanical Engineering, University of Puerto Rico,
March 23, 2012.
674.
J.N. Reddy, A Least-Squares Based Computational Techniques for Viscous Flows and a
Robust Shell Finite Element, Seminar, Department of Civil Engineering, University of
Houston, March 30, 2012.
675.
J.N. Reddy and J. Kim, Modified Couple Stress Theories of Functionally Graded Beams
and Plates, Proceedings of the IJSSD Symposium 2012 on Progress in Structural Stability and
Dynamics, 14-16 April 2012, Nanjing, China (edited by C. M. Wang, Y. B. Yang, and J.N.
Reddy), pp. 18, Southeast University Press, Nanjing, 2012.
676.
J.N. Reddy and Gregory S. Payette, A Higher-Order Spectral/hp Shell Finite Element
for the Nonlinear Analysis of Laminated Composites and Functionally Graded Elastic
Shell Structures, Opening Plenary Lecture, International Iranian Mechnical Engineering
Conference, Shiraz University, May 14-17, 2012, Shiraz, Iran.
677.
J.N. Reddy "A Nonlinear Modified Couple Stress-Based Theories of Functionally Graded
Beams and Plates," Opening Technical Plenary Lecture, International Conference on
Mechanics of Nano, Micro and Macro Composite Structures, 18-20 June 2012, Politecnico di
Torino, Italy.
678.
A. Srinivasa and J.N. Reddy, Development of Rotation Gradient Dependent Elasticity

and Specialization to Beams and Plates with Moderate Rotation, International Conference
on Mechanics of Nano, Micro and Macro Composite Structures, 18-20 June 2012, Politecnico
di Torino, Italy.
107
679.
J.N. Reddy, The Finite Element Method: A Powerful Tool for Numerical Simulations,
Seminar, Applied Mathematics and Computation Center, Celal Bayar University,
Manisa, Turkey, 28 June 2012.
680.
J.N. Reddy, A Shell Finite Element for Nonlinear Analysis of Multifunctional Materials
and Structures, Seminar, Applied Mathematics and Computation Center, Celal Bayar
University, Manisa, Turkey, 28 June 2012.
681.
J.N. Reddy, Mathematical Models and Numerical Simulations Using the Finite Element
Method, Challenge Lecture, Indian Institute of Technology, Hyderabad, India, 8 August
2012.
682.
J.N. Reddy, "Development of Rotation Gradient Dependent Elasticity and Specialization

to Beams and Plates with Moderate Rotation, Seminar, Department of Mechanical
Engineering, Indian Institute of Science, Bangalore, India, 16 August 2012.
683.
J.N. Reddy, "Nonlinear Nonlocal and Modified Couple Stress Theories of Functionally
Graded Beams and Plates, Satish Dhawan Seminar, Department of Aerospace
Engineering, Indian Institute of Science, Bangalore, India, 17 August 2012.
684.
G. S. Payette and J.N. Reddy, "A General Shell Element with Thickness Stretch for Large
Deformation Analysis of Composite Structures, Plenary Lecture, SOMIM Conference,
Salamanca, Mexico, 19-21 September 2012.
J.-F. Wen, S.-T. Tu, X.-L. Gao, and J.N. Reddy, New model for creep damage analysis
and its application to creep crack growth simulations, 9th International Conference in
Creep and Fatigue at Elevated Temperatures, 25 - 27 Sep 2012, London, UK.
685.
686.
J.N. Reddy, "A General Shell Element with Thickness Stretch for Large Deformation
Analysis of Composite Structures, Seminar, Department of Civil and Environmental
Engineering, University of Macau, Macau, China, 22 October 2012.
687.
J.N. Reddy, "Modified Couple Stress-Based Theories of Functionally Graded Beams and
Plates," Plenary Lecture, International Conference in Innovations in Design and
Manufacturing (InnDeM 2012), 5-7 Dec 2012, IIITDM Jabalpur, India.
688.
G. S. Payette and J.N. Reddy "A General Shell Finite Element for Large Deformation
Analysis of Composite Structures," Opening Plenary Lecture, International Congress on
Computational Mechanics and Simulation (ICCMS2012), Indian Institute of Technology,
Hyderabad, India, 10-12, December 2012.
689.
J.N. Reddy, Numerical Simulations of Problems in Science and Engineering Using the
Finite Element Method, Lecture on 125th Birth Anniversary of Ramanujam, Department of
Mathematics, National Institute of Technology, Warangal, India, 22 December 2012.
690.
J.N. Reddy, Numerical Simulations of Problems in Science and Engineering Using the
Finite Element Method, Institute Lecture, Department of Civil Engineering, Indian
Institute of Technology, Kanpur, India, 2 January 2013.
691.
J.N. Reddy, A Refined Shell Element and Least-Squares Finite Elements for Flows of
Incompressible Fluids, Seminar, Department of Civil Engineering, Indian Institute of
Science, Bangalore, India, 8 January 2013.
J.N. Reddy, Spectral Finite Element Technology for Large Deformation Analysis of
Composite Shells, Keynote Lecture, Indo-US Workshop on Recent Developments in
Composite Materials and Structures, JFWTC- GE Global Tech. Center, Bangalore, India,
March 18-20, 2013.
692.
108
693.
R. Gunes, K. Arslan, M. K. Apalak, and J.N. Reddy, ``Numerical Investigations on the

Ballistic Performance of Honeycomb Sandwich Structures Reinforced by Functionally
Graded Plates, 13th International Symposium on Multiscale, Multifunctional and
Functionally Graded Materials (MM&FGM), October 19-22, 2014; Taua Resort, SP, Brazil.
109
694.
J.N. Reddy, V. Vallala, and Gregory S. Payette, A Spectral/hp Shell Finite Element for
the Nonlinear Analysis of Laminated Composites and Functionally Graded Elastic
Structures, Opening Guest and Plenary Lecture, the Fourth International Symposium on
Solid Mechanics - MecSol 2013, Porto Alegre, Rio Grande do Sul, Brazil, 18-19 April 2013.
695.
J.N. Reddy, On Couple Stress-Based Theories of Functionally Graded Beams and

Plates, Seminar, Department of Applied Mechanics, Aalto University, Finland, 17 May
2013.
J.N. Reddy and V. P. Vallala, Spectral/hp Approximations in the Finite Element
Analysis of Solid and Fluid Mechanics Problems, Plenary Lecture, Fourth International
Conference on Mathematical and Computational Applications, June 11-13, 2013, Manisa,
Turkey.
J.N. Reddy, Refined Theories and Computational Models of Composite Beams, Plates,
and Shells, Plenary Lecture, the 17th International Conference on Composite Structures
(ICCS/17), at the University of Porto, Porto, Portugal, 17-21 June 2013.
F. Moleiro, C. M. Mota Soares, C. A. Mota Soares, and J.N. Reddy, Layerwise Models
for the Coupled Electromechanical Analysis of Multilayered Plates using Mixed LeastSquares Formulation, the 17th International Conference on Composite Structures (ICCS/17),
at the University of Porto, Porto, Portugal, 17-21 June 2013.
J.N. Reddy, A. Srinivasa, A. Arbind, and P. Khodabakhshi, On Nonlocal Elasticity and
Peridynamics with Applications to Beams and Plates, Plenary Lecture, 6th ECCOMAS
Thematic Conference on Smart Structures and Materials (SMART2013), 24-26 June 2013,
Politecnico di Torino, Torino, Italy.
696.
697.
698.
699.
700.
J.N. Reddy, Least-Squares Finite Element Models of Flows of Incompressible Fluids,

Seminar, Gregorio Millan Institute Fluid Dynamics, Nanoscience and Industrial
Mathematics, Escuela Politecnica Superior, Universidad Carlos III de Madrid, Spain,
July 2, 2013.
701.
J.N. Reddy, On Nonlocal Theory of Eringen and Gradient Elasticity Theory Beams and
Plates, Seminar, Department of Continuum Mechanics and Structural Analysis, Escuela
Politecnica Superior, Universidad Carlos III de Madrid, Spain, July 2, 2013.
J.N. Reddy and A. R. Srinivasa, On Microstructural Length Scales and Discrete
Peridynamics for Beams and Plates, Opening Talk (Keynote Lecture) presented in a
session on nano systems at the 7th International Conference on Advanced Computational
Engineering and Experimenting (ACEX2013 ), 1-4 July 2013, Madrid, Spain.
Greg Payette, V. Vallala, and J.N. Reddy, Higher-Order Spectral/hp Finite Element
Technology for Large Deformation Analysis of Shell Structures, Plenary Lecture
presented at the 2nd International Conference on Advances in Computational Modeling and
Simulation, 17-19 July 2013, Kunming, China.
J.N. Reddy and A. R. Srinivasa, On Rotation Gradient Dependent Elasticity and
Specialization to Beams and Plates with Moderate Rotation, Plenary Lecture presented
at the 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM2013), 23-26 July
2013, Montreal, Canada.
702.
703.
704.
110
ORGANIZATION OF CONFERENCES AND SESSIONS

ORGANIZATION OF CONFERENCES
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Midwest Mechanics Conference, University of Oklahoma, Norman (member, Organizing

Committee).
2lst Annual Meeting of the Society of Engineering Science, Virginia Polytechnic Institute,
Blacksburg, Oct. l5-l7, l984 (member, Organizing Committee and Chairman of
Proceedings).
International Symposium on Variational Methods in Geosciences, (member, Organizing
Committee), University of Oklahoma, September 1985.
Fifth International Conference on Mathematical Modeling, July 29-3l, l985, University of
California, Berkeley (member, Organizing Committee).
International Conference on Finite Elements in Computational Mechanics, Indian Institute of
Technology, Bombay, December 2-6, l985 (member, Technical Organizing Committee).
ARO Workshop on Constitutive Models, Virginia Polytechnic Institute, Blacksburg, VA,
March 24-26, 1986 (Organizer).
ASCE Engineering Mechanics Division Specialty Conference, Virginia Polytechnic Institute,
May 23-26, 1988 (member, Organizing Committee).
Advanced Study Institute on Finite Element Analysis for Engineering Design, Indian Institute
of Technology, Madras, India, August 1-10, 1988 (Co-Chairman).
Seventh International Conference on Finite Element Methods in Flow Problems, The University
of Alabama in Huntsville, April 3-7, 1989 (member, Organizing Committee).
Seventh International Conference on Mathematical and Computer Modeling, Chicago, IL,
August 2-5, 1989 (member, International Advisory Board).
Fourth Technical Conference on Composite Materials, Virginia Polytechnic Institute and
State University, Blacksburg, VA, October 3-6, 1989 (member, Organizing Committee).
First U.S. Conference on Discrete Element Methods (DEM), Colorado School of Mines,
Golden, Co, Oct. 17-20, 1989 (member, Technical Committee).
Second International Conference on Engineering Software, Indian Institute of Technology,
Delhi, India, Dec. 4-7, 1989 (member, Technical Organizing Committee).
Indo-U.S. Workshop on Composites for Aerospace Applications, Indian Institute of Science,
Bangalore, India, July 23-27, 1990 (Co-Chairman).
International Conference on Structural Testing, Analysis and Design, Indian Institute of
Science, Bangalore, July 29-August 3, 1990 (Member, International Steering and
Organization Committees).
Second World Congress on Computational Mechanics (WCCM II), Stuttgart, West Germany,
August 27-31, 1990 (member, International Consulting Board).
International Conference on the Mechanics, Physics, and Structure of Materials, Aug. 19-24,
1990, Aristotle University, Thessaloniki, Greece (Aristotle's 23 Centuries Celebration)
(member, International Organizing Committee).
First U.S. National Congress on Computational Mechanics, Chicago, IL, July 21-24, 1991
(member, International Advisory Committee).
First International Conference on Computational Structures Technology, Heriot-Watt
University, Edinburgh, Scotland, August 20-22, 1991 (member, Conference Editorial
Board).
IUTAM Symposium on Local Mechanics Concepts for Composite Materials, Virginia
Polytechnic Institute and State University, Blacksburg, Oct. 27-31, 1991 (Co-Chairman).
111
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
Second International Congress on Recent Developments in Air- & Structure-Borne Sound and
Vibration, Auburn University, Auburn, Alabama, March 4-6, 1992 (member, Scientific
Committee).
Third International Conference on Computational Plasticity Fundamentals and Applications,
Barcelona, Spain, April 6-10, 1992 (member, Technical Advisory Committee).
Eighth International Conference on Mechanics of Composite Materials, Riga, Latvia, April 2022, 1993 (member, International Advisory Board).
Ninth International Conference on Mathematical and Computer Modeling, University of
California, Berkeley, CA, July 26-29, 1993 (member, Organizing Committee).
Second Asian-Pacific Conference on Computational Mechanics, Sydney, Australia, August 36, 1993 (member, International Scientific Committee).
Second U. S. National Congress on Computational Mechanics, Washington, D.C., August
1993 (member of International Advisory Committee).
Advanced Study Institute on Engineering Analysis and Design, Indian Institute of
Technology, Madras, India, August 2-11, 1993 (Co-Organizer).
First Pan-Pacific Conference on Computational Engineering, Seoul, Korea, November 1-5,
1993 (member of the International Scientific Committee)
Seventeenth Southeastern Conference on Theoretical and Applied Mechanics, hosted by
Louisiana Tech University and University of Arkansas at Hot Springs National Park,
Arkansas, April 10-12, 1994 (Editorial Committee Member).
Third World Congress on Computational Mechanics (WCCM III), Tokyo, Japan, August 1-4,
1994 (International Consulting Board Member).
Second International Conference on Computational Structures Technology, Athens, Greece,
August 30-September 1, 1994 (Conference Editorial Board Member).
First Industry/University Symposium on High Speed Civil Transport Vehicle, North Carolina
A & T State University, Greensboro, NC 27411, December 4-6, 1994 (member of the
Advisory Committee).
Fourth Pan American Congress of Applied Mechanics (PACAM IV), University of Salvador,
Buenos Aires, Argentina, January 3-6, 1995 (member of the Organizing Committee).
Fourth International Conference on Computational Plasticity Fundamentals and Applications,
Barcelona, Spain, April 3-6, 1995 (member of the Technical Advisory Committee).
Tenth Engineering Mechanics Conference, University of Colorado, Boulder, May 21-24, 1995
(member of the National Steering Committee).
International Conference on Stability of Structures (ICSS 95), June 7-9, 1995, Coimbatore,
India (member of International Technical Committee).
Third U. S. National Congress of Computational Mechanics, Dallas, June 12-14, 1995
(General Chairman).
International Conference on Computational Engineering Science (ICES'95), Hawaii, July 30August 3, 1995 (member of International Scientific Committee).
Advances in Structured and Heterogeneous Continua II, August 14-18, 1995, Moscow, Russia
(member of Scientific Committee).
International Conference on Engineering Computation and Computer Simulation, November
27-29, 1995, Changsha, China (member of Scientific Committee).
Second ECCOMAS Conference on Numerical Methods in Engineering, and Third ECCOMAS
Computational Fluid Dynamics Conference, Paris, France, September 9-13, 1996 (member of
the International Support Committee).
112
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
SPIE's 4th Symposium on Smart Structures and Materials, San Diego, 3-6 March 1997
(member of the Program Committee on Control in Smart Structures).
Second International Conference on the Application of Numerical Methods in Engineering,
Universiti Pertanian Malaysia, Malaysia, 23-25 June 1997 (member of the International
Fourth U. S. National Congress of Computational Mechanics, San Francisco, August 6-8, 1997
(member of the Scientific Program Committee).
Second International Conference on Composite Science and Technology, University of Natal,
Durban, South Africa, 9-11 June 1998 (member of the International Advisory Committee).
NATO Advanced Study Institute on Mechanics of Composite Materials and Structures, Tria,
Portugal, July 12-24, 1998; organized by Instituto de Engenharia Mecnica, Lisbon,
Portugal (co-organizer).
Fourth International Conference on Advances in Materials and Processing Technologies
(AMPT`98), organized by University Putra Malaysia, Mines Beach Resort, Kuala
Lumpur, Malaysia, August 24-28, 1998 (member of the International Scientific Advisory
Committee (ISAC)).
International Conference on Theoretical, Applied, Computational, and Experimental Mechanics,
Indian Institute of Technology, Kharagpur, India, December 1-5, 1998 (member of the
International Advisory Board).
Integrity, Reliability, Failure, An International Conference, University of Porto, Porto,
Portugal, July 19-22, 1999 (member of the International Scientific Committee).
Fifth U.S. National Congress on Computational Mechanics, University of Colorado, Boulder,
August 4-6, 1999 (member of the International Advisory Committee).
Civil & Environmental Engineering Conference - Year 2000, New Frontiers & Challenges,
Asian Institute of Technology, Thailand, 8-12 November, 1999 (member of the Honorary
Fourth Asia-Pacific Conference on Computational Mechanics (APCOM`99), University of
Singapore, Singapore, December 15-17, 1999 (member of the Scientific Program
Committee).
Fourth International Colloquium on Computation of Shell & Spatial Structures (IASS - IACM
2000), June 5-7, 2000, Chania - Crete, Greece (member of the Scientific Committee).
9th International Conference on Mechanics and Technology of Composite Materials, September
11-14, 2000, Sofia, Bulgaria (member of the International Organizing Committee).
CADCOMP 2000, September 13-15, 2000, Bologna, Italy (member of the International
Scientific Advisory Committee).
Twentieth South Eastern Conference on Theoretical and Applied Mechanics (SECTAM XX),
April, 2000, Callaway Gardens, GA (organized by Auburn University) (member of the
Scientific Advisory Committee).
ICSSD 2000 - International Conference on Structural Stability and Dynamics, Dec. 7-9, 2000,
Taipei, Taiwan (member of the Organizing Committee).
SPIE International Conference on Smart Materials and MEMS, 13-16 December 2000,
Melbourne, Australia (member of the Program Committee).
First M.I.T. Conference on Computational Fluid and Solid Mechanics, June 12-14, 2001, MIT,
Cambridge, MA (member of the Scientific Advisory Board).
The Second European Conference on Computational Mechanics (ECCM-2000), June 26-29,
2001, Polish Academy of Sciences, Polish Association for Computational Mechanics,
Cracow University of Technology (member of the International Scientific Committee).
113
61.
62.
63.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
79.
International Conference on Materials for Advanced Technologies (ICMAT 2001), Symposium

K: Advances in Polymers and Composites, 1-6 July 2001, Singapore (member of the
International Scientific Committee).
First Congress of the Asian-Pacific Association for Computational Mechanics, Sydney,
Australia, October/November 2001 (member of the International Scientific Committee).
New Trends in Design and Manufacture, An International Symposium, November 3-7,
2001, Aswan, Egypt (member of the International Scientific Committee).
International Conference on Advances in Civil Engineering, January 3-5, 2002, Indian
Institute of Technology, Kharagpur, India, (member of the International Advisory Board).
The Second World Engineering Congress, July 22-25, 2002, Kuching, Sarawak, Malaysia
(member of the International Advisory Committee and Advisor to the Mechanical &
Aerospace Engineering Conference).
Fourth International Conference on Nonlinear Mechanics (ICNM-IV) & IUTAM Symposium
on Duality-Complementarity-Symmetry in Nonlinear Mechanics (IUTAM-SCDS), Shanghai,
China, August 14-17, 2002 (member of the Steering Committee).
Mechanics & Materials in Design (M2 D-4), 4th International Conference, Nagoya
University, Nagoya, Japan, June 5-8, 2002 (member of the International Scientific
Committee).
International Conference on Scientific and Engineering Computation, December 3-5, 2002,
National University of Singapore, Singapore (member of the International Scientific
Second International Conference on Structural Stability and Dynamics, December 16-18, 2002,
National University of Singapore, Singapore (member of the Organizing Committee).
VII Congresso de Mecnica Aplicada e Computacional, Universidade de vora, April 14-16,
2003, Evora, Portuagal (member of the International Scientific Advisory Committee).
International Conference Bioengineering and Biosciences Conference (BBC) Singapore,
June, 2003 (member of the International Scientific Advisory Committee).
International Conference in Structural Engineering and Mechanics (ASEM04), Seoul, S.
Korea, September 2-4, 2004 (member of the International Scientific Advisory Committee).
Seventh International Conference on Computational Structures Technology, Lisbon, Portugal,
September 7-9, 2004 (member of the Conference Editorial Board).
International Conference on Theoretical, Applied, Computational and Experimental Mechanics
(ICTACEM 2004), IIT, Kharagpur, INDIA, December 28-30, 2004 (member of the
International Scientific Advisory Committee).
Third International Conference on Structural Stability and Dynamics, June 19-23, 2005,
Kissemmee, Florida (General Chair and Organizer).
Eighth U.S. National Congress on Computational Mechanics, University of Texas, Austin,
July 4-6, 2005 (member of the International Advisory Committee).
International Conference on Advances in Structural Dynamics and Its Applications, ICASDA2005, Gandhi Institute of Technology and Management, Visakhapatnam, INDIA,
December 7-9, 2005 (member of the International Advisory Committee).
First International Symposium on Design Modelling and Experiments of Adaptive Structures
and Smart Systems (DeMEASS I), July 10-12, 2006, Bardonecchia (Turin), Italy (member
of the Advisory Board).
Seventh World Congress on Computational Mechanics, co-hosted by Northwestern
University and University of California, Los Angeles, Century Plaza Hotel & Spa, Los
Angeles, California, July 16-22, 2006 (member of the Scientific Advisory Board).
114
80.
81.
82.
83.
84.
85.
86.
87.
88.
89.
90.
91.
92.
93.
94.
95.
96.
97.
98.
5th International Conference on Mechanics and Materials in Design, July 24 - 26, 2006, Porto,
Portugal (Member of International Scientific Committee).
Tenth East Asia Pacific Conference on Structural Engineering and Construction (EASEC-10),
Asian Institute of Technology, Bangkok, Thailand, August 2-4, 2006 (member of the
International Steering Committee).
International Conference on Enhancement and Promotion of Computational Methods in
Engineering Science and Mechanics, Changuchun, China, 10-12 August, 2006 (coOrganizer).
Multiscale and Functionally Graded Materials (FGM2006), October 14-18, 2006, Hawaii,
USA. (member of the International Scientific Committee).
Trends in Product Life Cycle- Modeling, Simulation and Synthesis, PLMSS, Bangalore,
INDIA, December 18-19, 2006 (member of International Advisory Committee).
Fifth International Conference on Nonlinear Mechanics (ICNM-V), June 11-14, 2007,
Shanghai, China (member of the International Steering Committee).
Ninth U.S. National Congress on Computational Mechanics (USNNCM9), July 22-26, 2007,
San Francisco (member of the Scientific Program Committee).
International Conference on Computational Ballistics 2007 (CBAL2007), (member of the
Scientific Advisory Committee), Wessex Institute of Technology, England.
Second International Symposium on Design, Modelling and Experiments of Adaptive Structures
and Smart Systems (DeMEASS II), October 14-17, 2007 in Bad Herrenalb, Germany
(member of the Scientific Advisory Committee).
International Conference on Multiscale Modelling and Simulation (Nano-, Micro-, and MacroMechanics of Materials and Systems), ICMMS08, 2 4 January 2008, Bangalore, INDIA
(General Chair of the Conference).
Eighth World Congress on Computational Mechanics, Venice, Italy, June 30-July 4, 2008
(member of the Scientific Advisory Board).
Sixth International Conference on Computation of Shell & Spatial Structures (Spanning Nano
to Mega), International Association of Shell Structures (IASS) and International
Association of Computational Mechanics (IACM), Cornell University, Ithaca, May 2831, 2008 (member of the Scientific Committee).
An International Symposium on Computational Structural Engineering (CSE 09), Shanghai,
China, June 22-24, 2009 (member of the International Advisory Committee).
Third International Conference on Integrity, Reliability and Failure: Challenges and
Opportunities (IRF2009), University of Porto, Porto, Portugal, July 20-24, 2009 (member of
the International Scientific Committee).
International Conference on Computational Methods in Engineering and Sciences, January 810, 2009, Hyderabad, India (member of Advisory Committee).
International Conference on Materials, Mechanics, and Management (ICMMM), Department
of Civil Engineering, College of Engineering, Trivandrum, Kerala, India, 2009 (member
of the Advisory Committee).
IISc Centenary International Conference and Exhibition on Aerospace Engineering
(ICEAE2009), Indian Institute of Science, Bangalore, India, 18 22 May 2009 (member of
the International Advisory Committee).
International Symposium on Computational Structural Engineering (CSE 09), Shanghai,
China, on June 22-24, 2009 (member of International Advisory Committee).
9th Conference on Shell Structures, Theory and Applications, Gdask-Jurata, Poland, 14-16,
October 2009 (member of International Advisory Board).
115
99.
100.
101.
102.
103.
104.
105.
106.
107.
108.
109.
110.
111.
112.
113.
114.
115.
116.
5th Civil Engineering Conference in the Asian Region (CECAR5) and Australian Structural
Engineering Conference (ASEC 2010), 8-12 August 2010, Sydney Convention and
Exhibition Centre, Sydney, Australia, 2010 (member of International Scientific Committee).
Tenth U.S. National Congress for Computational Mechanics, Greater Columbus Convention
Center, Columbus, Ohio, 16 19 July 2009 (member of the International Scientific
Committee).
Workshops on Computational and Mathematical Challenges in Material Science and
Engineering. Multifunctional Materials: Couled Field Theories, Composites and Materials
Failure (co-organized with Jay Walton and Dimitris Lagoudas), The Institute for Applied
Mathematics and Computational Science (IAMCS), Texas A&M University, Sep 30 Oct
1, 2009.
Shell Structures Theory and Applications, SSTA: the 9th Conference 2009, Gdansk-Jurata
Poland, October 14-16, 2009 (member of International Advisory Board).
Fifth European Conference on Computational Fluid Dynamics (ECCOMAS CFD 2010),
National Civil Engineering Laboratory, Lisbon, Portugal, 14-17 June 2010 (member of
the Scientific Committee).
4th Intewrnational Conference on Advanced Computational Engineering and Experimenting,
ACE-X 2010, 8 and 9 July 2010, Paris, France (member of Scientific Committee).
ICMMS 2010 International Conference on Multiscale Modelling and Simulation (Nano-,
Micro-, and Macro-Mechanics of Materials and Systems), 17-19 December 2010,
Guangzhou, CHINA (General Chair of the Conference).
2nd International Conference on Computational and Mathematical Biomedical Engineering,
CMBE11 (member of Scientific Advisory Committee).30 March 2011 1 April 2011, George
Mason University, Washington, DC.
16th International Conference on Composite Structures (member of Advisory Committee) June
27-30, University of Porto, Portugal.
ACE-X 2011, 4 -6 July 2011, Algarve, Portugal (member of Scientific Committee).
The Second Joint American-Canadian Conference on Composites, Sep 26-28, 2011, Montreal,
Canada (member of the Scientific Committee).
11th US National Congress of Computational Mechanics (member of Scientific Committee)
July 25-29, University of Minnesota, Minneapolis-St. Paul.
International Confernce on Advances in Modelling and Computing, Indian Institute of
Technology (member of International Adviory Committee), 5-7 Dec. 2011, Indian Institute
of Technology-Roorkee, Roorkee, India.
Third International Conference on Manufacturing Engineering (ICME2011), 27-29 Dec ember
2011, University of Tehran, Tehran, Iran (member of international advisory committee).
Fourth International Conference on Structural Stability and Dynamics (ICSSD2012), 4-6
January 2012, Malaviya National Institute of Technology, Jaipur, Rajasthan, India
(General Chair of the conference).
ACE-X 2011, 1-4 July 2012, Istanbul, Turkey (member of Scientific Committee).
International Construction Congress 2012, 11-13 October 2012, Suleyman Demirel
University, Isparta, Turkey (member of International Scientific Committee).
International Conference on Innovations in Design & Manufacturing (InnDem 2012), Indian
Institute of Information Technology, Design & Manufacturing, Jabalpur (IIITDM
Jabalpur), December 5-7, 2012 (member of the International Advisory Committee).
116
117.
118.
119.
120.
121.
122.
123.
124.
125.
126.
127.
128.
129.
130.
131.
4th International Congress on Computational Mechanics and Simulation (ICCMS 2012),

Indian Institute of Technology Hyderabad and Indian Association for Computational
Mechanics, 10-12 December 2012, Hyderabad (member of Advisory Committee).
5th Asian-Pacific Congress on Computational Mechanics 2013 (APCOM 2013), National
University of Singapore, (member of International Scientific Committee).
Global Conference on Women Leadership (GCWL) on 21st and 22nd Feb, 2013, School of
Management, SRM University, Kattankulathur, Tamilnadu, India (member of the
Advisory Board).
MecSol2013, International Symposium on Solid Mechanics, UFRGS - Federal University of
Rio Grande do Sul, Porto Alegre, Rio Grande do Sul, Brazil, April 18-19, 2013 (member
of the Scientific Committee).
4th Canadian Conference on Nonlinear Mechanics (CanCNSM2013), Montreal, Canada, July
23-26, 2013 (member of the International Scientific Committee).
Sixth International Conference on Nonlinear Mechanics (ICNM-VI), Shanghai, China,
August 12-15, 2013 (member of the Steering Committee).
17th International Conference on Composite Structures (ICCS/17), the University of Porto,
Porto, Portugal, 17-21 June 2013 (member of the International Scientific Committee).
4th International Conference on Integrity, Reliability & Failure (IRF2013), Funchal, Madeira,
Portugal, 23-27 June 2013 (member of the International Scientific Committee).
Third African Conference on Computational Mechanics, Livingston, Zambia, 30 July - 2
August 2013 (member, International Advisory Committee).
Composites 2013: IV ECCOMAS Thematic Conference on the Mechanical Response of
Composites, S. Miguel, Azores, Portugal, 25-27 September 2013 (member of the Scientific
Committee).
International Conference on Science and Technology of Heterogeneous Materials and Structures,
Wuhan University, Wuhan, China, 11-13 October 2013 (member of the Scientific
Committee).
3rd International Conference on Computational and Mathematical Biomedical Engineering,
(CMBE13), City University of Hong-Kong, 16-18 December 2013 (member of the
International Advisory Committee).
1st International Conference on Mechanics of Composites (MECHCOMP2014), State
University of New York at Stony Brook, Long Island, June 8-12, 2014 (member of the
Scientific Committee).
Pan-American Congress on Computational Mechanics PANACM, Buenos Aires, Argentina,
27-29 April 2015 (member of the International Scientific Committee).
Multiscale, Multifunctional and Functionally Graded Materials 2014 (MM&FGM2014),
October 19-22, 2014; Taua Resort, SP, Brazil (http://mmfgm2014.org; member of the
Scientific Committee).
ORGANIZATION OF SYMPOSIA AND SESSIONS

1.
Penalty Finite Elements" for the Mathematical Methods Committee of ASCE at the
Third ASCE/EMD Specialty Conference, Sept. 17-19, 1979, The University of Texas at
Austin, Austin, TX.
117
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Computational Methods for Hypervelocity Impact Calculations, Sixteenth Annual

Meeting of the Society of Engineering Science, Sept. 5-7, 1979, Northwestern University,
Evanston, IL.
Nonlinear Analysis of Composite Plates and Shells, Eighteenth Annual Meeting of the
Society of Engineering Science, Sept. 2-4, 1981.
Recent Developments in Finite Elements, (two sessions) Eleventh Southeastern
Conference on Theoretical and Applied Mechanics (SECTAM XI), April 8-9, 1982, The
University of Alabama in Huntsville, Alabama.
Finite-Elements in Fluid Flow, Nineteenth Annual Meeting of the Society of Engineering
Science, October 27-29, 1982, University of Missouri-Rolla, Rolla, Missouri.
Penalty-Finite Element Methods in Mechanics, for ASME Committee on Computing in
Applied Mechanics (CONCAM), 1982 ASME Winter Annual Meeting, November 14-19,
1982, Phoenix, Arizona.
Computational Methods-II: Recent Developments, 20th Annual Meeting of the Society of
Engineering Science, August 22-24, 1983, University of Delaware, Newark, Delaware.
Vibrations of Plates and Shells, (two sessions) XII Southern conference on Theoretical and
Applied Mechanics, Callaway Gardens, GA, May 10-11, 1984.
Computational Methods in Fluid Flow, 1984 ASCE Spring Convention, Atlanta, May 1417, 1984.
Non-Newtonian Flows, 21st Meeting of the Society of Engineering Science, Virginia
Polytechnic Institute, Blacksburg, October 1984.
Analysis of Composite Material Structures, 2lst Annual Meeting of the Society of
Engineering Science, Virginia Polytechnic Institute and State University, Blacksburg, VA,
October l5-l7, l984.
Constitutive Modeling, 21st Annual Meeting of the Society of Engineering Science,
Virginia Polytechnic Institute and State University, Blacksburg, VA, October 15-17, l984.
Computational Methods in Composites, ASME Pressure Vessels & Piping Conference,
New Orleans, LA, June 1985.
Computational Methods in Composites, Joint Meeting of ASME and ASCE,
Albuquerque, NM, June 23-25, 1985.
Symposium on Recent Advances in Computational Mechanics, ASME/ASCE Summer
Meeting, Albuquerque, NM, June 23-25, l985.
Stress Analysis of Adhesively Bonded Joints, 22nd Annual Technical Meeting of the
Society of Engineering Science, The Pennsylvania State University, State College, PA,
October 7-9, 1985.
Computational Methods for Plate and Shell Problems, ASCE/EMD Specialty
Conference Virginia Polytechnic Institute and State University, Blacksburg, VA, May 2325, 1988.
Modeling of Non-Newtonian Viscoelastic Flows, Seventh Int. Conference on Finite
Element Methods in Flow Problems, University of Alabama in Huntsville, Alabama, April
3-7, 1989.
Mechanics of Laminated Composite Structures, Twelfth Canadian Congress of Applied
Mechanics, Carleton University, Ottawa, Canada, May 28-June 2, 1989.
Micromechanics of Composite Materials, Third Joint ASCE/ASME Mechanics Conference,
San Diego, CA, July 9-12, 1989.
118
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
Recent Advances in Refined Plate and Shell Elements for Composites, (with R. K.
Kapania) First U. S. National Congress on Computational Mechanics, Chicago, IL, July 21-24,
1991.
Computational Models for Study of Local Effects in Composites, (with J. L. Teply),
First U. S. National Congress on Computational Mechanics, Chicago, IL, July 21-24, 1991.
Mechanics of Composite Structures, (with N. F. Knight, Jr.) 28th Annual Technical
Meeting of the Society of Engineering Science, Gainesville, FL, Nov. 6-8, 1991.
Enhancing Analysis Techniques for Composite Materials, (seven sessions organized
with L. Schwer and A. Mal), 1991 ASME Winter Annual Meeting, Atlanta, GA, Dec. 4-6,
1991.
Advances in Finite Element Analysis in Fluid Dynamics, (two sessions organized with
M. N. Dhaubhadel and M. S. Engelman) 1991 ASME Winter Annual Meeting, Atlanta,
GA, Dec. 4-6, 1991.
Advances in Finite Deformation Problems in Materials Processing and Structures,
(three sessions organized with N. Chandra) 1991 ASME Winter Annual Meeting, Atlanta,
GA, Dec. 4-6, 1991.
Inelastic Deformation of Composite Materials, Third Int. Conference on Computational\
Plasticity and Applications, Barcelona, Spain, April 6-10, 1992.
Advances in Finite Element Analysis in Fluid Dynamics, (Two sessions organized
with M. N. Dhaubhadel and M. S. Engelman) 1992 ASME Winter Annual Meeting,
Anaheim, CA, November 9-14, 1992.
Computational Modeling of Composites, (Three sessions organized with N. Chandra
and A. K. Noor) First Joint Meeting of ASCE-EMD, ASME-AMD, and SES, Charlottesville,
Virginia, June 6-9, 1993.
Micro and Macromechanical Studies of Composites, (with P. K. Banerjee), Second U. S.
National Congress of Computational Mechanics, August 16-18, 1993, Washington, D.C
Failure Mechanics for Composite Materials, (with J. Whitcomb), Second U. S. National
Congress of Computational Mechanics, August 16-18, 1993, Washington, D.C.
Recent Advances in Computational Mechanics, Twelfth U. S. National Congress of
Applied Mechanics, June 26-July 1, 1994, University of Washington, Seattle, Washington.
Computational Fluid Dynamics and Heat Transfer, Society of Engineering Science 31st
Annual Meeting, October 12-14, 1994, Texas A&M University, College Station, Texas.
Composite Materials and Structures, the Second International Conference on
Computational Structures Technology, August 30-September 1, 1994, Athens, Greece.
Mechanics of Composites with Application to Infrastructure, (with E. J. Barbero) Tenth
ASCE Engineering Mechanics Conference, May 21-24, 1995, University of Colorado,
Boulder, Colorado.
Analytical and Computational Models for Composites, (with E. J. Barbero) Tenth
ASCE Engineering Mechanics Conference, May 21-24, 1995, University of Colorado,
Boulder, Colorado.
Damage and Failure of Composites, Tenth ASCE Engineering Mechanics Conference,
May 21-24, 1995, University of Colorado, Boulder, Colorado.
Modeling of Smart and Intelligent Structures, Tenth ASCE Engineering Mechanics
Conference, May 21-24, 1995, University of Colorado, Boulder.
New Developments in Plate and Shell Finite Elements, Tenth ASCE Engineering
Mechanics Conference, May 21-24, 1995, University of Colorado, Boulder, Colorado.
119
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
Micromechanics of Composites, (with E. J. Barbero) Fourth Pan American Congress of

Applied Mechanics (PACAM IV), January 3-5, 1995, Buenos Aires, Argentina.
Damage Mechanics of Composites, (with E. J. Barbero) Fourth Pan American Congress of
Applied Mechanics (PACAM IV), January 3-5, 1995, Buenos Aires, Argentina.
Numerical Modeling of Composites, (with E. J. Barbero) Fourth Pan American Congress
of Applied Mechanics (PACAM IV), January 3-5, 1995, Buenos Aires, Argentina.
Computational Modeling of Damage Initiation, Evolution and Identification in
Composite Materials and Structures, (with Ronald C. Averill) a three-session
symposium organized at the 1996 International Mechanical Engineering Congress and
Exposition (IMECE'96), November 17-22, 1996, Atlanta, Georgia.
Functionally Graded and Shape Memory Materials, (with Cate Brinson) a threesession symposium organized at the 1997 International Mechanical Engineering Congress
and Exposition (IMECE'97), November 16-21, 1997, Dallas, Texas.
Constitutive and Computational Models of Shape Memory and Functionally Graded
Materials, a two-session symposium organized at the Engineering Mechanics Specialty
Meeting of ASCE, University of California, San Diego, May 17-20, 1998.
Micromechanics and Damage Characterization of Advanced Materials, (with Shaker
A. Meguid) a four-session symposium organized at the 13th U.S. National Congress of
Applied Mechanics (USNCAM), University of Florida, Gainesville, Florida, June 21-26,
1998.
Mechanics of Composite Materials and Structures, a symposium organized in honor
of the 60th Birthday Celebration of Robert M. Jones at the 15th Annual Technical
Conference of the American Society of Composites, September 24-27, 2000, Texas A&M
University, College Station, TX.
Adaptive Structures and Material Systems, (with Diann Brei, University of Michigan)
a symposium organized at the IMECE'00, November 5-10, 2000, Walt Disney World
Dolphin, Orlando, Florida.
Modeling and Design of Functionally Graded Materials (FGMs)" (with Glaucio Paulino,
University of Illinois and Florin Bobaru, University of Nebraska), a symposium
organized at the IMECE'03, November 16-21, 2003, Washington, DC.
Mechanics of Composite Materials and Structures, a Mini-Symposium organized
(with C. A. Mota Soares and A. Benjeddou) at III European Conference on Computational
Mechanics, Solids, Structures and Coupled Problems in Engineering, 5-8 June 2006, LNEC,
Lisbon, Portugal.
Least-Squares Finite Element Models, a minisymposium organized (with Juan P.
Pontaza and ) at Seventh World Congress on Computational Mechanics, co-hosted by
Northwestern University and University of California, Los Angeles, Century Plaza Hotel
& Spa, Los Angeles, California, July 16-22, 2006.
Nested Nonlinear Micromechanics and Structural Models, a mini symposium
organized (with Anastasia Muliana and Rami Haj-Ali) at Seventh World Congress on
Computational Mechanics, co-hosted by Northwestern University and University of
California, Los Angeles, Century Plaza Hotel & Spa, Los Angeles, California, July 16-22,
2006.
Computational Solid Mechanics: Recent Advances, (organized by: J.N. Reddy, Jon
Bass, and Jin-Rae Cho), a symposium organized in honor of the 70th birthday of
Professor J. T. Oden at the Ninth U.S. National Congress for Computational Mechanics, San
Francisco, CA, July 23-27, 2007 (8 sessions).
120
54.
55.
56.
57.
58.
59.
60.
61.
62.
The k-Version of the Finite Element Method and h-p-k Adaptive Processes,
(Organizers: Albert Romkes, Karan S. Surana, and J.N. Reddy), a symposium organized
in honor of the 70th birthday of Professor J. T. Oden at the Ninth U.S. National Congress for
Cell & Molecular Biomechanics - Experiments & Computation, (Organizers: C. T. Lim,
Takami Yamaguchi, J.N. Reddy, and Mohammad R. K. Mofrad), International Conference
on Computational and Experimental Engineering Sciences (ICCES09), Phuket, Thailand, 8-13
April 2009.
Computational Modeling and Experimental Investigation of Biological Cells and Soft
Tissues, (Organizers: J.N. Reddy, V. U. Unnikrishnan, G.U. Unnikrishnan, and C. T.
Lim), the Tenth U.S. National Congress for Computational Mechanics, Greater Columbus
Convention Center, Columbus, Ohio, 16 19 July 2009.
The k-Version of the Finite Element Method and h-p-k Adaptive Processes,,
(Organizers: Albert Romkes, Karan S. Surana, and J.N. Reddy), a symposium at the Tenth
U.S. National Congress for Computational Mechanics, Greater Columbus Convention
Center, Columbus, Ohio, 16 19 July 2009.
IJSSD Symposium Progress in Structural Stability and Dynamics (with H.A. Rashid,
CM Wang, and YB Yang) at Sixth International Conference on Advances in Steel Structures
(ICASS 09), Hong Kong, 16-18 December 2009.
Computational Modeling and Experimental Investigation of Hard and Soft Tissues,
(with V. U. Unnikrishnan, G.U. Unnikrishnan, and C. T. Lim), minisymposium
organized at the 11th U.S. National Congress of Computational Mechanics (USNCCM 11),
University of Minnesota, Minneapolis, July 25-29, 2011.
Mathematical Modeling of Continua and Computational Approaches, (with A.
Romkes, K.S. Surana), minisymposium organized at 11th U.S. National Congress of
Computational Mechanics (USNCCM 11), University of Minnesota, Minneapolis, July 2529, 2011.
Multiscale modeling and simulation in tissue biomechanics(with Prof. Franco Maceri
of the University of Rome II) minisymposium organized for MATHMOD 2012 (7th
Vienna International Conference on Mathematical Modelling), 15-17 February 2012, Vienna
University of Technology, Vienna.
IJSSD Symposium 2012 on Progress in Structural Stability and Dynamics, 14-16 April 2012,
Nanjing China (organized by C. M. Wang, Y. B. Yang, and J.N. Reddy), Southeast
University, Nanjing, 2012.
121
POST-DOCTORAL FELLOWS AND GRADUATE STUDENTS

POST-DOCTORAL FELLOWS AND RESEARCHERS ADVISED
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
Elio Socco, University of Rome II, Rome, Italy (1985,1988).

Fraternali, University of Salermo, Salermo, Italy (1987).
Marco Savoia, University of Bologna,Bologna, Italy (1990, 1993).
Anil Tayal, University of Delhi, New Delhi, India (1990).
G.S. Reddy, National Defence Metallurgical Laboratory, Hyderabad, India (1990).
K. Krishna Kumar, Indian Institute of Technology, Madras (February-December, 1994).
A.F. Palmerio, Brazilina Air Force, Brazil (Spring 1994).
Emilio Larrod, University of Zaragoza, Zaragoza, Spain (Spring 1997).
Kohji Suzuki, Department of Engineering, University of Tokto, Tokyo, Japan (June 1998May 1999).
Joaquim Barbosa, Instituto de Engenharia Mecnica (Institute of Mechanical
Engineering) Technical University of Lisbon, Lisbon, PORTUGAL (Spring 1999).
Zhen-Qiang Cheng, University of Science and Technology of China, China (March 1999March 2004).
Siddhartha Mukherjee, Indian Institute of Technology, Madras, India (June 1999-August
2001).
Eugnio S. Gaco, Instituto de Engenharia Mecnica (Institute of Mechanical
Engineering) Technical University of Lisbon, Lisbon, PORTUGAL (January - July 2000).
Elio Sacco, Department of Mechanics, Structures and Environment, University of
Cassino, Cassino, Italy (July-August 2001).
Manas Chandra Ray, Department of Mechanical Engineering, Indian Institute of
Technology, Kharagpur, INDIA (May - July 2002 and Sept. 2003-May 2004).
Juan P. Pontaza, Department of Mechanical Engineering, Texas A&M University
(January 2003-2006).
Roman A. Arciniega, Department of Mechanical Engineering, Texas A&M University
(January 2005-2006).
Recep Gnes, Department of Mechanical Engineering, Erciyes University, Kayseri
Turkey (Sep 2007-Aug 2008).
Vinu U. Unnikrsihnan, Department of Mechanical Engineering, Texas A&M University
(August 2007-2012).
Ginu U. Unnikrsihnan, Department of Mechanical Engineering, Texas A&M University
(May 2008-2010).
Roman Arciniega, Department of Mechanical Engineering, Texas A&M University
(August 2008-2009).
Jose Viriato Santo, Technical University of Lisbon, Portugal (Mar-Aug 2009).
Yiping Liu, Department of Mechanics, South China University of Technology,
Guanzhou, China (Sep. 2008-August 2010).
Anirudh Shukla, Department of Aerospace Engineering, Technical University of
Delft, The Netherlands (Sep-Dec 2011).
Jianfeng Wen, School of Mechanical and Power Engineering, East China University of
Science and Technology (ECUST), Shanghai, China (September 1, 2011 to August
31, 2012.
122
26. Manas Chandra Ray, Department of Mechanical Engineering, Indian Institute of

Technology, Kharagpur, India (July-Aug, 2012).
27. Recep Ekici, Department of Mechanical Engineering, Erciyes University, Kayseri,
Turkey (Sep 2012-May 2013).
28. Mustafa Yildirim, Department of Mechanical Engineering, Erciyes University, Kayseri,
Turkey (Oct 2012-May 2013).
29. Ginu U. Unnikrsihnan, Department of Mechanical Engineering, Boston University (JanAugust 2013).
30. Bozkurt Burak Ozhan, Department of Mechanical Engineering, Celal Bayar
University, Manisa, Turkey 45140 (Jul 2013-Oct 2013).
31. Gultekin Sinir, Department of Civil Engineering, Celal Bayar University, Manisa,
Turkey 45143 (12 Aug 2013- 11 Aug 2014).
32. Jani Romanoff, Department of Solid Mechanics, AaltoUniversity, P.O.Box 15300,
00076 Aalto, Finland (Sep 2013-Dec 2013).
DOCTORAL STUDENTS ADVISED (an asterisk indicates that the person is employed by
an academic institution)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Robert Belie, Fracture Prediction in Plane Elasto-Plastic Problems by the Finite Element
Method, University of Oklahoma, Norman, OK, 1978.
John D. Warburton, The Use of the Finite Element Method in Meteorological
Modeling,(coadvised by S. Sasaki) University of Oklahoma, Norman, OK, 1979.
Akio Satake, Numerical Analysis of Certain Constrained Optimization Problems in
Nonlinear Mechanics, University of Oklahoma, Norman, OK, 1980.
Wei-Chang Chao, Geometrically Nonlinear Analysis of Layered Composite Plates and
Shells, Virginia Polytechnic Institute and State University, Blacksburg, VA, 1983.
N. S. Putcha, A Mixed Shear Flexible Finite Element for Geometrically Nonlinear
Analysis of Laminated Plates, Virginia Polytechnic Institute and State University,
Blacksburg, VA, l984.
K. Chandrashekhara*, Geometric and Material Nonlinear Analysis of Laminated
Composite Plates and Shells, Virginia Polytechnic Institute and State University,
Blacksburg, VA, 1985.
C. F. Liu*, Geometrically Nonlinear Analysis of Composite Laminates Using a Refined
Shear Deformation Shell Theory, Virginia Polytechnic Institute and State University,
Blacksburg, VA, 1985.
P. R. Heyliger*, A Mixed Computational Algorithm Based on Updated Lagrangian
Formulation for Plane Elastic Contact Problems, Virginia Polytechnic Institute and
State University, Blacksburg, VA, June 1986.
A. A. Khdeir*, Analytical Solutions for the Statics and Dynamics of Rectangular
Laminated Composite Plates Using Shear Deformation Theories, Virginia Polytechnic
Institute and State University, Blacksburg, VA, October 1986.
D. Rourk, Geometric and Material Nonlinear Effects in Elastic-Plastic and Failure
Analyses of Anisotropic Laminated Structures, Virginia Polytechnic Institute and State
University, Blacksburg, VA, December, 1986.
C. L. Liao*, An Incremental Total Lagrangian Formulation for General Shell-Type
Structures, Virginia Polytechnic Institute and State University, Blacksburg, June 1987.
123
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
A. K. Pandey, A Nonlinear Computational Model for the Strength and Failure of

Composite Plates and Shells, Virginia Polytechnic Institute and State University,
Blacksburg, June 1987.
S. Roy*, A Finite Element Analysis of Adhesively Bonded Joints Including Geometric
Nonlinearity, Non-Linear Viscoelasticity, Moisture Diffusion and Failure, Virginia
Polytechnic Institute and State University, Blacksburg, November 1987.
Ariovaldo F. Palmerio*, On a Moderate Rotation Theory for Anisotropic Shells,
Virginia Polytechnic Institute and State University, Blacksburg, September 1988.
Robert T. Arenburg, Analysis of Metal Matrix Composite Structures Using a
Micromechanical Constitutive Theory, Virginia Polytechnic Institute and State
University, Blacksburg, Virginia, December 1988.
Pey M. Wung, Large Deformation Analysis of Laminated Composite Structures by a
Continuum-Based Shell Element with Transverse Deformation, Virginia Polytechnic
Institute and State University, Blacksburg, VA, June 1989.
Ever J. Barbero*, On a Generalized Laminate Theory with Application to Bending,
Vibration, and Delamination Buckling in Composite Laminates, Virginia Polytechnic
Institute and State University, Blacksburg, VA, September 1989.
A. Nosier*, A Study of Damped and Undamped Vibration and Stability Problems of
Laminated Plates and Shells According to Various Shear Deformation Theories,
Virginia Polytechnic Institute and State University, Blacksburg, VA, Dec. 1990.
M. P. Reddy, Numerical Simulation of Three-Dimensional Casting, Extrusion, and
Forming Processes, Virginia Polytechnic Institute and State University, Blacksburg, VA,
Dec. 1990.
S. P. Engelstad, Nonlinear Probabilistic Finite Element Modelling of Composite Shells,
Virginia Polytechnic Institute and State University, Blacksburg, VA, Dec. 1990.
Ronald C. Averill*, Nonlinear Analysis of Laminated Composite Shells Using a
Micromechanics-Based Progressive Damage Model, Virginia Polytechnic Institute and
State University, Blacksburg, VA, June 1992.
Y. S. N. Reddy, Numerical Simulation of Damage and Progressive Failures in
Composite Laminates Using the Layerwise Plate Theory, Virginia Polytechnic Institute
and State University, August 1992.
S. K. Kassegne*, Layerwise Theory for Discretely Stiffened Laminated Cylindrical
Shells, Virginia Polytechnic Institute and State University, December 1992.
Ching Yi Tsai, Modeling of Chemical Vapor Infiltration Process, (coadvisor with S.
Desu,) Virginia Polytechnic Institute and State University, June 1993.
Robert M. Fithen*, Adaptive Finite Element Simulation of Incompressible Viscous
Flow, Virginia Polytechnic Institute and State University, August 1993.
Donald H. Robbins, Jr., Hierarchical Modeling of Laminated Composite Plates Using
Variable Kinematic Finite Elements and Mesh Superposition, Virginia Polytechnic
Institute and State University, November 1993.
F. T. Kokkinos*, Three-Dimensional Layerwise Modeling of Layered Media with
Boundary Integral Equations, Virginia Polytechnic Institute and State University,
December 1995.
C. M. Dakshina Moorthy, Modeling Laminates Using a Layerwise Finite Element with
Enhanced Strains for Interlaminar Stress Recovery and Delamination Characteristics,
Texas A&M University, April 1997.
124
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
John A. Mitchell, A High Performance Iterative Solution Procedure for Solving

Problems in Structural Mechanics Using the Finite Element Method, Texas A&M
University, May 1997.
Hussein Allaboun, Growth and Coalescence of Bubbles During Late Stages of Polymer
Foaming Processes, (coadvised with W. Flumerfelt) Texas A&M University, April 1998.
Govind Rengarajan, On the Inelastic Behavior of Crystalline Solids, Texas A&M
University, September 1998.
Achuth Rao, Study of Molecular Orientation and Phase Transition in Polymers During
the Film Blowing Process, Texas A&M University, September 1998.
Grama N. Praveen, Modeling Inelasticity in Materials with Application to
Superplasticity, Texas A&M University, February 1999.
Philip Schembri, A 3D Meshless Computational Procedure for Nonlinear Analysis of
Structures, Texas A&M University, September 2002.
Juan P. Pontaza, Least-Squares Variational Principles and the Finite Element Method:
Theory, Formulations, and Models for Solids and Fluid Mechanics Texas A&M
University, December 2003.
Seung Joon Lee, Nonlinear Analysis of Composite Laminated Plate and Shell Structures
with Smart Material Laminae Texas A&M University, January 2004.
J. Eugnio Semendo Garo*, Modeling of Adaptive Structures (co-advised with Drs.
C. A. Mota Soares and C. M. Mota Soares), Universidade Tcnica de Lisboa Instituto
Superior Tcnico (Technical University of Lisbon), October 2004.
Ravisankar S. Mayavaram, Modeling and Simulation of Film Blowing Process Texas
A&M University, November 2004.
Goy Teck Lim, Scratch Behavior of Polymers Texas A&M University, June 2005.
Roman A. Arciniega*, On Tensor-Based Finite Elements Model for the Analysis of Shell
Structures, Texas A&M University, October 2005.
Ravi S. Karedla, Modeling of Crack Tip High Inertia Zone in Dynamic Brittle Fracture,
Texas A&M University, May 2006.
Wilson Aliaga, Analysis of Smart Functionally Graded Plates, Texas A&M University,
May 2006.
Vivek Prabhakar, Least Squares Based Finite Element Formulations and Their
Applications in Fluid Mechanics, Texas A&M University, December 2006.
Yetzirah Urthaler, On Simple and Accurate Finite Element Models for Nonlinear
Bending Analysis of Beams and Plates, Texas A&M University, December 2006.
Vinu U. Unnikrishnan*, Multiscale Analysis of Nanocomposite and Nanofibrous
Structures, Texas A&M University, August 2007.
Wook Jin Na, Damage Analysis of Laminated Composite Beams under Bending Loads
using the Layerwise Theory, Texas A&M University, November 2007.
Ginu Unnikrishnan, Computational Modelling of Biological Cells and Soft Tissues,
Texas A&M University, May 2008.
Henrique Santos, A Semi-Analytical Finite Element for Analysis of Shells of
Revolution (coadvised with Drs. C. A. Mota Soares and C. M. Mota Soares),
Universidade Tcnica de Lisboa Instituto Superior Tcnico (Technical University of
Lisbon), Portugal, October 2008.
Filipa Andreia de Matos Moleiro*, Mixed Least-Squares Finite Element Models for
Analysis of Multilayered Composite Plates (coadvised with Drs. C. A. Mota Soares and
125
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
C. M. Mota Soares), Universidade Tcnica de Lisboa Instituto Superior Tcnico

(Technical University of Lisbon), Portugal, February 2009.
James Steuber*, A Model for Nonlinear Electrokinetics in Electric Field Guided
Assembly of Colloids, Texas A&M University, October 2009.
Rakesh Ranjan, hp-Spectral Element Methods in Structural Mechanics and
Computational Fluid Dynamics, Texas A&M University, November 2009.
Greg Payette, Spectral/hp Finite Element Models for Fluids and Structures, Texas
A&M University, Spring 2012.
Ramin Aghababaei , "Modeling Slip Gradients and Internal Stresses in Crystalline
Microstructures with Distributed Defects," (coadvised with Shailendra Joshi), National
University of Singapore, August 2012.
Pritha Ghosh, Model Development and Simulation of the Response of Shape Memory
Polymers, (coadvised with Arun Srinivasa), Texas A&M University, College Station,
August 2012.
Abhilash Nair, Discrete Micromechanics of Random Fibrous Architectures, (coadvised
with Shailendra Joshi), National University of Singapore, December 2012.
Venkat V. Vallala, Higher-Order Spectral/hp Finite Element Technology for Structures
and Fluid Flows, Texas A&M University, College Station, August 2013.
Seyed Hamid Reza Mirkhani, Crystal Plasticity Modeling and Simulation of
Nanotwinned Metals (coadvised with Shailendra Joshi), National University of
Singapore, Spring 2013.
Feifei Cheng, Multi-scale Computational Modeling of Multiphase Composites with
Damage, Texas A&M University, College Station, December 2013.
Ashwin Rao, Structural Thermomechanical Models for Shape Memory Alloy (SMA)
Components, May 2014 (coadvised with Arun Srinivasa).
Ozgu Ozsoy, Investigation of Interfaces under Mechanical and Thermal Loading Using
a Cohesive Zone Model, Texas A&M University, College Station, May 2014.
M.S. STUDENTS ADVISED

1.
2.
3.
4.
5.
6.
7.
C. S. Tsay, Bending, Stability, and Vibration of Thin Rectangular Plates by Stationary

Finite Element Models" University of Oklahoma, Norman, OK, 1977.
V. D. Murty, Solution of Integral Equations by the Finite Element Method, University
of Oklahoma, Norman, OK, 1977.
R. Gera, An Accurate Finite-Difference Analysis of Bending of Thin Rectangular Elastic
Plates, University of Oklahoma, Norman, OK, 1977.
I. R. Singh, Large Deflection and Large Amplitude Free Vibrations of Beams and
Circular Plates by the Finite Element Method, University of Oklahoma, Norman, OK,
1978.
F. Irani, Higher Order Conventional and Mixed Finite Elements Including Shear
Deformation and Rotatory Inertia for Dynamic Analysis of Beams, University of
Oklahoma, Norman, OK, 1978.
D. R. Mamidi, A Penalty Finite-Element Model for the Numerical Solution of Free
Convection Heat Transfer in Rectangular Enclosures, University of Oklahoma,
Norman, OK, 1979.
Y. S. Hsu, Thermal Stress Analysis of Composite Plates and Shells by the Finite Element
Method, University of Oklahoma, Norman, OK, 1980.
126
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
C. L. Huang, Large Deflection Bending and Vibrations of Thick Annular Plates with
Variable Thickness, University of Oklahoma, Norman, OK, 1980.
W. C. Chao, Finite-Element Analysis of Laminated Composite (Ordinary and
Bimodular-Material) Plates, University of Oklahoma, Norman, OK, 1980.
J. D. Mook, Large Deflection Transient Response of Layered Composite Plates,
Virginia Polytechnic Institute and State University, Blacksburg, VA, 1982.
N. D. Phan, Exact and Finite-Element Analysis of Laminated Plates Using a HigherOrder Theory, Virginia Polytechnic Institute and State University, Blacksburg, VA,
l984.
V. A. Padhye, A Penalty-Finite Element Model for Axisymmetric Flows of Viscoelastic
Fluids, by Virginia Polytechnic Institute and State University, Blacksburg, VA,
November 1986.
Q. Gu, Nonlinear Analysis of Free-Edge Effects in Symmetric Laminates Under Axial
Loading, Virginia Polytechnic Institute and State University, February 1987.
Ravinder Bhumbla, A Study of Vibrations in Rotating Laminated Composite Plates
Accounting for Shear Deformation and Rotary Inertia, Virginia Polytechnic Institute
and State University, Blacksburg, VA, April 1989.
Didier Turlier, Numerical Stress Intensity Factor Determination of Notched Laminated
Specimens, (coadvised with Don H. Morris), Virginia Polytechnic Institute and State
University, Blacksburg, VA, April 1989
Jayashree Moorthy, Dynamic Stability of Composite Laminated PlatesVirginia
Polytechnic Institute and State University, Blacksburg, VA, June 1989.
M. P. Reddy, Finite Element Analysis of Coupled Heat Transfer and Fluid Flow of NonNewtonian, Incompressible Fluids in Three-Dimensional Enclosures, Virginia
Polytechnic Institute and State University, June 1989.
R. C. Averill, On the Behavior of Shear Deformable Plate Elements, Virginia
Polytechnic Institute and State University, August 1989.
John A. Mitchell, The Effects of Embedded Piezoelectric Layers in Composite Cylinders
and Applications, Virginia Polytechnic Institute and State University, July 1992.
Stiffness Reduction and Stress Transfer in Composite Laminates with Transverse
Matrix Cracks, by G. N. Praveen, Texas A&M University, September 1994.
P. Bose, A Critical Evaluation of Various Higher-Order Plate Theories, Virginia
Polytechnic Institute and State University, December 1995.
C.-D. Chin, A Parametric Study of Thermomechanical Behavior of Functionally
Gradient Materials, Texas A&M University, October 1996.
Sivasubramaniam Krishnan, Vibration Suppression of Laminated Composite Plates
Using Embedded Smart Material Layers," Texas A&M University, July 2000.
Nikhil C. Murgude, Geometric Nonlinear Analysis of Microbeams Under Electrostatic
Loading, Texas A&M University, December 2001.
Praveen Gupta, Buckling and Vibration of Orthotropic Plates with an Internal Hinge,
Texas A&M University, December 2001.
Raghavendra K. Shenoy, Analysis of Three-Dimensional Frames Using Shear-LockingFree Beam Elements Based on the Third-Order Shear Deformation Theory, Texas A&M
University, December 2001.
Nauman. M. Sheikh, The Formulation and Computer Implementation of Element-Free
Galerkin Method for Euler-Bernoulli Beam Theory, Texas A&M University, December
2001.
127
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
Rahul Joshi, An Implementation of the Extended Finite Element Method (XFEM) for a
Linear Elastic Domain with Fracture, (coadvised with T. Strouboulis), Texas A&M
University, May 2004.
David Matthew McCutcheon, Machine Augmented Composite Materials for Damping
Purposes, (coadvised by Terry Creasy), Texas A&M University, December 2004.
Brent D. Pickle, Evaluation of Stress in BMI-Carbon Fiber Laminate to Determine the
Onset of Microcracking, (coadvised with Roger Morgan), December 2004.
Anmol Agrawal, Hingeless Flow Control over an Airfoil via Distributed Actuation,
(coadvised by Othon Rediniotis), Texas A&M University, August 2005.
Gregory P. Payette, Mathematical Modeling of Evaporative Cooling of Moisture
Bearing Epoxy Composite Plates, (coadvised with Roger Morgan), Texas A&M
University, March 2006.
Ryan Petrus, Dynamics Analysis of Fluid Conveying Pipes, Texas A&M University,
May 2006.
Wooram Kim, Unconventional Finite Element Models for Nonlinear Analysis of Beams
and Plates, May 22, 2007.
Britt Pratt, Least Squares Finite Element and Meshless Methods in Heat Transfer,
Texas A&M University, March 2008.
Feifei Cheng, A Study on Continuum-Based Computational Models of Living Cell,
Texas A&M University, Oct. 2008.
Venkat Vallala, Alternative Least-Squares Finite Element Models of Navier-Stokes
Equations for Power-Law Fluids, Texas A&M University, May 2009.
Ameeta Raut, Linear and Nonlinear Finite Element Analysis of Beams Using LeastSquares Finite Element Model, Texas A&M University, May 2009.
Nellie Rajarova, An Assessment of Alternative Finite Element Models Problems in Heat
Transfer and Fluid Mechanics, Texas A&M University, May 2009.
Dhatri Gaddamanugu, Finite Element Modeling and Molecular Dynamic Simulation of
Carbon Nanotubes/Polymer Composites, Texas A&M University, May 2009.
Jayavel Aumugam, Ionic Polymer-Metal Composite Beams, Thermodynamical
Modeling and Simulation,(coadvsed with Arun Srinivasa), Texas A&M University,
August 2012.
Archana Arbind, Nonlinear Analysis of Conventional and Microstructure Dependent
Functionally Graded Beam under Thermo-Mechanical Loads, Texas A&M University,
August 2012.
Sukanya Doshi, Study of Thermo-mechanical Coupling in Functionally Graded MetalCeramic Composites, (coadvsed with Anastasia Muliana), Texas A&M University, Dec
2012.
Patrick Mahaffey, Bending, Vibration and Buckling Response of Modified EulerBernoulli and Timoshenko Beam Theories Accounting for the von Karman Geometric
Nonlinearity," Texas A&M University, August 2013.
Sandeep Pidaparti, A Computational Study on the Leakage of Supercritical Carbon
Dioxide Through Labyrinth Seals, (coadvised with Dr. Devesh Ranjan), Texas A&M
University, Dec 2013.
128
GRADUATE STUDENTS CURRENTLY ADVISED

M.S. Theses in Progress (Titles are tentative):
1. Sravani Nuti, Surgical Thread Simulations Based on a Novel Information Theory
Approach, (coavised with Dr. Annie Ruimi, TAMU-Q).
Dissertations in Progress (Titles are tentative):

1. Jinseok Kim, ``Multiscale Damage in Fiber-Reinforced Composites and Life Prediction
using Higher-Order Theories, December 2013.
2. Jessica Berry, Damage and Failures in Composite and Multifunctional Materials, May
2014.
3. Helnaz Soltani, Fluid-Solid Interaction with Application to Blood Flow in Arteries,
May 2015.
4. Michael Powell, Computational Framework for the Analysis of Fluid-Solid Interaction
Problems, May 2015.
5. Wooram Kim, "Novel Time-Integration Schemes for Structural Mechanics," May 2016.
6. Archana Arbind, Functionally Graded Structures with Modified Couple Stress Effects,
May 2016.
7. Parisa Khodabakhshi, Discrete Peridynamics for Damage in Structures, Fall 2016.
8. Miguel Gutierrez Rivera, A Shell Element with Higher-Order Spectral Approximations
for Damage Prediction, Fall 2016.
9. Namhee Kim, title not finalized
SPECIAL STUDENTS ADVISED

1. Steven Ulrick, Jr., Finite Element Analysis Validation Techniques, (MS No-Thesis
Option Project Report), Texas A&M University, College Station, April 1995.
2. Robert Pandorf, Construction and Finite Element Analysis of Laminated Plate
Structures, (Konstruktiver Entwurf), Texas A&M University, December 1995.
3. Payal Pawliwal, Finite Element Analysis of Functionally Graded Beams Using the
Third Order Shear Deformation Theory, (MS Non-Thesis Option Project Report), Texas
A&M University, College Station, May 2004.
4. Ruchir Patwa, Analysis of Single-Walled Carbon Nanotubes Using Structural
Mechanics Approach, (MS Non-Thesis Option Project Report), Texas A&M University,
College Station, May 2004.
5. Karthik Aruru, Exact Solutions for Bucking of Timoshenko Columns (MS Non-Thesis
Option Project Report) Texas A&M University, College Station, October 2004.
129
SPONSORED RESEARCH PROJECTS

The amounts indicated do not include the cost-sharing by the receiving institution; where listed
as a co-principal investigator, the amounts are equally divided between the two co-principal
investigators unless stated otherwise.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Mixed and Hybrid Finite Element Analysis of Problems in Structural Mechanics, NSF
Research Initiation Grant, National Science Foundation (ENG75-10265), April, 1975March, 1977, $17,000.
Installation of NONSAP Computer Program on IBM 370/158 at the University of
Oklahoma, March, 1976-June, 1976, $4,000.
Feasibility of the Finite Element Method as a Tool for Petroleum Exploration, (Coprincipal Investigator), Exxon, Chevron, General Crude and Atlantic Richfield, June,
1976-Jan., 1978, $67,500.
Computer Simulation of Folding in the Blueridge, Central Appalachians, (Coprincipal Investigator), NSF (EAR77-20873), March, 1978-August, 1979, $39,600.
Prediction of Fracture Porosity in Rocks, (Co-principal Investigator), Energy
Resources Center, University of Oklahoma, Oct., 1978-June, 1979, $18,400.
Accurate Representation of the Earth's Orography in Numerical Forecast Models by the
Finite Element Method, (Co-principal Investigator), NSF (ATM77-23111), Jan., 1978June, 1980, $l66,300.
Extraction of Heat from Hot Dry Rock, Energy Resources Center, University of
Oklahoma, Jan., 1980-July, 1980, $5,857.
Nonlinear Analysis of Laminated, Bimodulus Composite-Material Structures, (Coprincipal Investigator), ONR (NOOO14-78-C-0647) $80,000, Sept., 1978-Aug., 1980).
Nonlinear Analysis of Laminated, Bimodulus, Composite-Material Structures, ONR
(NOOO14-78-C-0647); Sept. 1980-Aug., 1983, $72,735.
Nonlinear Transient Analysis of Layered Composite Plates and Shells, Phase I: Plates,
AFOSR (AFOSR-81-0142), April 1981-June, 1982, $48,288.
Graduate Research Projects in Nonlinear and 3-D Structural Analysis, NASA-Lewis
(NAG 3-208), August, 198l-August, 1984, $89,933.
Nonlinear Transient Analysis of Layered Composite Plates and Shells, Phase II:
Shells, AFOSR, June, 1982 to December, 1983, $58,653.
A Refined Nonlinear Analysis of Laminated Composite Plates and Shells, NASA
Langley, March l984-June l985, $93,000.
Analysis of Stresses in Adhesive Joints by the Finite Element Method, ONR (Materials
Division), June l984-Sept. 30, l985, $76,000.
Refined Nonlinear Analysis of Laminated Composite Plates and Shells, Army
Research Office (Mathematics Division), March l5, l985-June l5, l987, $83,4l4.
Travel Grant to present a paper at the Sixth International Conference on Fracture, New
Delhi, India, Dec. 4-l0, l984, NSF, $2,300.
Development of Processing Methods for Self-Reinforcing and Other Composite
Thermoplastics, CIT, Virginia Tech., (with D. G. Baird), l5 October, l984-l5 April, l986,
$10,000.
Frictional Phenomena in Contact Stress Problems, (Co-principal investigator with
Daniel Post), ONR (Mechanics Division), July 15, l984-March 14, l988; $3l3,277, personal
share: $206,119.
130
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
Closure and Plasticity of Small Cracks Under Cyclic Loading, (with Norman
Dowling), USAF/ASD, July 1, 1985-December 31, 1989, $135,888.
Analysis of Stresses in Adhesive Joints by the Finite Element Method, ONR (Materials
Division), Oct. 1, 1985-Sept. 30, 1988, $219,510.
Advanced Study Institute on the Finite Element Analysis for Engineering Design, NSF
(International Programs), April 1, 1987-Sept. 30, 1989, $27,000.
Probabilistic Micromechanics for High Temperature Composites, NASA Lewis
Research Center, Oct. 1, 1988-March 30, 1992, $227,098.
Modeling of Complex Flows with Heat Transfer, NSF (International Programs), Jan. 1,
1989-Dec. 31, 1991, ($28,908 to JNR plus Indian Institute of Technology, Madras $124,203
to IIT-Madras).
A Study of Failures and Delamination Buckling and Growth in Composite Laminates,
NASA Langley Research Center, October 1, 1989-Dec. 31, 1991, $116,210.
Thermo-Mechanical Analysis of Composite Shells Using a Small Strain and Moderate
Rotation Theory, NASA Head Quarters, July 1, 1989-June 30, 1992, $62,000.
Residual Strength of Delaminated Composite Panels under Compressive Loads, NSF
(International Programs), Oct. 1, 1989-Sept. 30, 1992 ($28,133 to JNR + $76,114 to Indian
Institute of Science, Bangalore).
Indo-U.S. Workshop on Composites for Aerospace Applications, NSF (International
Programs, Travel Grant, Nov. 1, 1989-October 31, 1990, $32,000.
Design Oriented Analysis of Geodesically-Stiffened Composite Cylindrical Shells
Accounting for Local Effects, (Co-principal Investigator), NASA Langley Research
Center, Personal Share: Jan. 16, 1990-December 1, 1992, $56,084.
Local Mechanics Concepts for Composite Material Systems, (Co-principal investigator
with K. L. Reifsnider), NSF, Nov. 15, 1990-April 30, 1992, , $11,695.
Global-Local Finite Element Analysis of Geodesically Stiffened Cylindrical Shells,
NASA Head Quarters, Sept. 19, 1990-January 1, 1993, $44,000.
Study of Wave Propagation and Dynamic Response of Laminated Composite
Structures, (Co-principal Investigator with R. Kapania at VPI), Army Research Office,
June 1, 1990-November 30, 1993, $240,206.
Dynamic Behavior of Inflatable Dams, (Co-principal Investigator with R. H. Plaut and
D. Walker), NSF, Dec. 1, 1990-May 31, 1993; $ 134,253, personal share: $42,691.
Development of a Modular Finite Element Analysis Computer Program for
Geotechnical Engineering, (Co-principal Investigator with J. M. Duncan), U. S. Army
Corps of Engineers, July 15, 1992-November 30, 1993, $62,764.
Residual strength of Delaminated Composite Panels Under Compressive Loads, NSF
(International Programs), August 1, 1992-July 31, 1994, Cooperative Science Program
with the Indian Institute of Science (India), $44,230.
Hierarchical Global-Local Finite Element Modeling of Stress Wave Propagation Using
Mesh Superposition, U. S. Army Corps of Engineers, January 1, 1993-December 31,
1994, $30,135.
Residual Strength of Delaminated Composite Panels under Compressive Loads,
National Science Foundation (International Programs), October 1, 1993-March 31, 1995,
$21,840.
Mechanics of Composite Materials and Structures, Sandia National Laboratory, June
1, 1993-September 30, 1995, $64,000.
131
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
Nonlinear Progressive Failure Analysis of Laminated Composite Plates, University of

Texas at San Antonio, September 1, 1995-August 31, 1996, $38,620.
Constitutive Modeling Finite Element Simulation of Polymer Film Blowing, (with
Lynden Archer) Interdisciplinary Research Initiative, TAMU, FY95-96, $24,935.
Thermomechanical Behavior of Functionally Graded Materials, Air Force Office of
Scientific Research (F49620-95-1-0342), May 1, 1995-July 1, 1998, $250,522.
Computational Approaches for Smart Materials and Structural Systems Including NonLinearities, Army Research Office (DAAH04-96-1-0080), May 1, 1996-April 30, 1999,
$210,000.
A study of structure-property relationships in blown polymeric films, National
Science Foundation (with H.-J. Sue and Lynden Archer) September 1, 1997-August 31,
2000; $399,989 (personal share: $299,000).
Numerical Simulation of Polymer Film Blowing, Consortium of companies (Equistar,
Exxon, Clorox, Texas Eastman, Union Carbide, and Phillips)(with H.-J. Sue and K. R.
Rajagopal); June 1, 1997-May 31, 2001, $875,000.
A Meshless Computational Methodology for Nonlinear Dynamic Simulation of
Structures" (`Parallel Optimization in a Structural Mechanics Code Applied to the
Problem of Fatigue in Metals') Los Alamos National Laboratory, Los Alamos National
Laboratory, Los Alamos, Nov. 1, 1999-October 31, 2001, $100,000.
Damage Models and Computational Tools for Health-Monitoring of Smart Composite
Structures," U.S. Army Research Office, May 1, 2001-April 30, 2004 (3 yrs.), $297,000.
Scratch Behavior of Metals and Coatings," Consortium of companies (Formosa Plastics,
Luzenac, Solvay, and Visteon) (with H.-J. Sue) $15,000/company/yr., April 1, 2001December 31, 2005.
A Multiscale Computational Model for Predicting Damage Evolution in Viscoelastic
Composites Subjected to Impact Loading," U.S. Army Research Office, August 1, 2001Oct. 31, 2004 (3 yrs.), $227,000.
Development of k-Version of the Finite Element Method: A Robust Mathematical and
Computational Procedure, U.S. Air Force of Office of Scientific Research, March 1,
2003-December 31, 2005, $150,000.
Morgan, R. and Reddy, J.N., Development of Ultra High Temperature, Light Weight
Carbon Composites," Texas Higher Education Coordinating Board, Jan. 1, 2004-Dec. 31,
2005 (2 yrs.), $98,500.
A New Computational Methodology for Structural Dynamics Problems, U.S. Army
Research Office, April 1, 2005-March 31, 2008, $217,381.
Thermal Protection/Light Weight Materials, Development of Future Air Force
Vehicles (with R. J. Morgan and T. Creasy) U.S. Air Force of Office of Scientific
Research, April 1, 2006-March 31, 2009, $418,661 (personal share: $150k).
Renewable Energy and Environmental Sustainability Using Biomass from Animal
Production Systems, US Department of Energy, Golden, CO (with K. Annamalai, et al.)
June 1, 2006-May 31, 2007; $495,000 (personal share $42,713/year).
Controllable Active Materials via Internally Generated Pressure Phase II, US Army
Aviation Missile Command (Bell Helicopter Textron, Inc. is sub-recipient) (with T. S.
Creasy, PI, and J.N. Reddy and R. J. Morgan as co PIs), 1 October 2006 to 30 September
2009, $730,595 (personal share: $137K).
132
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
Multiscale Modelling and Simulation (Nano-, Micro-, and Macro-Mechanics) of

Materials and Systems with Applications to Nanosystems and Soft Tissues, March 26,
2007-March 31, 2009, S$150,000, National University of Singapore (WBS R-533-000-004112).
Multiphase Analysis of Reservoir Flow, Terra Nova Sciences, LLC, Houston; $148,330,
March 1, 2008-28 Feb, 2009.
Micro and Nano Systems Assembly using Virtual and Physical Environments, New
Mexico State University, $3,000, 25 Aug, 2008-30 Sep 2008.
Development of Rate Constitutive Equations for Solids, Liquids, and
Gases,subcontract from University of Kansas, Army Research Office, $15,000, 1 Oct
2009-30 June 2010.
On Strongly Coupled Partitioned Schemes for Solving Fluid-Structure Interaction
Problems Using High Order Finite Element Models Based on Minimization Principles,
Sandia National Labs, $20,000 (matching of $20,000 from TAMU) for Graduate
Fellowship of Gregory Payette, 1 Sep, 2010, 31 August 2011.
Numerical Simulation of Nonlinear Sloshing and Wave Loads on the LNG Carriers,
Qatar University, $61,250, 1 Sep 2009-31 Aug 2012.
Effects of Micro- and Nano-Sized Spheres Moving Through a Quiescent Viscous Fluid,
Reza Sadr and J.N. Reddy, Qatar National Research Foundation, $996,085, 29 Nov. 2010June 2014.
(MURI09) Synthesis, Characterization and Modeling of Functionally Graded
Multifunctional Hybrid Composites for Extreme Environments, Air Force Office of
Scientific Research, $4,726,332, 15 Sep 2009-14 Sep 2012 (Option 1 $3,010,588 15 Sep 201214 Sep 2014), multi-university and multi-investigator grant; personal share: $141,211 (15
Sep 2009- 14 Sep 2010); $124,291 (15 Sep 2010- 14 Sep 2011); $211,915 (15 Sep 2011- 14 Sep
2012) - project continued.
Nonlinear Field-Coupling Responses of Adaptive Functionally Graded Structures,
National Science Foundation, $364,223, Sep 1, 2010-Aug 31, 2013 [with A. Muliana (PI)
and M. Rodovic].
Modeling and Computational Methodologies for the Stimulation of the Response of
Multifunctional Programmable Materials, National Science Foundation, $377,447, Sep
1, 2010-Aug 31, 2013 (with A. R. Srinivasa as the PI).
Strongly Coupled Fluid-Structure Interaction with Application to Blood Flow in
Deformable Arteries, National Science Foundation, $385,098, July 15, 2011-July 14, 2014
(with K. Nakshatrala as the co-PI).
A New Mathematical and Computational Framework for BVPs and IVPs in Solids,
Fluids, Gases and Their Interactions, Army Research Office (through a subcontract with
University of Kansas), $90,000, July 15, 2011-July 14, 2014.
Surgical Threads Simulations Based on a Novel Information-Theory Approach, Qatar
National Research Foundation (with Annie Ruimi, et al.), $ 954,611, Sep 2012Aug 2015.
Equipment Acquisition for the Enhancement of Computational Infrastructure for
Research in the Mathematical Modeling and Numerical Simulation of Multiphysics and
Interaction Processes," Army Research Office (through a subcontract with University of
Kansas), $81,816, 7 August 2012- 7 August 2013.
133
PROFESSIONAL SERVICE ACTIVITIES

PROFESSIONAL AFFLIATIONS
Current Memberships
Aeronautical Society of India (Fellow)
American Academy of Mechanics (Life Fellow, Honorary Member)
American Institute of Aeronautics and Astronautics (Fellow)
American Society of Composites (Fellow)
American Society of Civil Engineers (Fellow)
American Society of Mechanical Engineers (Fellow)
International Association for Computational Mechanics (Fellow)
US Association of Computational Mechanics (Fellow)
Registered Professional Engineer, State of Oklahoma (P.E. # 11031)
Past Memberships
American Association for the Advancement of Science
American Society for Engineering Education
International Association for Analog Computation (AICA)
National Society of Professional Engineers
New York Academy of Science
Phi Kappa Phi
Pi Tau Sigma
Sigma Xi
Society of Automotive Engineers
Society of Industrial and Applied Mathematics
The Adhesion Society
Society of Engineering Science
PROFESSIONAL OFFICES HELD

Local (State and Campus)
Member, Search Advisory Committee for Head of Aerospace Engineering, Texas A & M
University, 2012-2013.
Member, Honorary Degree Committee, Texas A & M University, 2010-present.
Member, Advisory Committee, Department of Mechanical Engineering, Texas A & M
University, 2010-present.
Member, Department Post-Tenure Review Committee, Department of Mechanical
Engineering, 2008-present.
Member (2010-2013) and Chair (2011) of Tenure and Promotion Committee, Department
of Mechanical Engineering, Texas A & M University.
134
Member (2002-2005) and Chair (2003-2004 and 2010-2013) of Tenure and Promotion
Committee, Department of Mechanical Engineering, Texas A & M University.
Member, Search Advisory Committee for Head of Mechanical Engineering, Texas A &
M University, 2003-2004 and 2010-2012.
Member, Council of Principal Investigators, Texas A & M University, 2010-present.
Member, Distinguished Professors Committee, College of Engineering, Texas A&M
Member, Search Advisory Committee for the Dean of Faculty, Texas A & M University,
2012-2013.
Research Standards Officer, Texas A & M University, 1999-2005 (6 year term).
Director, Computational Sciences and Engineering Simulations Graduate Program, Texas A &
M University, 2000-2004.
Associate Director, Institute for Scientific Computation, Texas A & M University, 19992004.
Evaluator of Endowed Professorships and Endowed Chairs of the College, Texas A&M
Member, Faculty Recruiting Committee, Department of Mechanical Engineering, Texas
A & M University, 2003-2004.
Member, Selection Committee for the Texas A&M University Bush Excellence Award for
Faculty in International Research, Texas A & M University, 2003-2004.
Member, Search Advisory Committee for Dean of Engineering, Texas A & M University,
2001-2002.
Member, Committee on the Selection of Endowed Chair Position Holders, Dept. of Civil
Engineering, Texas A & M University, 2000-2001.
Member of Advisory Committee, Dept. of Mechanical Engineering, Texas A & M
Member of Strategic Planning Committee, Dept. of Mechanical Engineering, Texas A & M
Member, Committee on the Selection of Marcus C. Easterling Chair Holder, Dept. of
Mechanical Engineering, Texas A & M University, 1999-2000.
Member, Committee on the Selection of Named Professorship Holders, Dept. of Civil
Member, Committee on the Selection of Forsyth Chair Holder, Dept. of Mechanical
Member, Promotion and Tenure Committee, College of Engineering, Texas A & M
University, 1993-1995; Chair of the Committee: 1995 and 1996.
Chair, Committee on the Selection of Kotzebue and Wyatt Professorships, Dept. of
Mechanical Engineering, Texas A & M University, 1993-1994.
Member, Graduate Committee, Dept. of Mechanical Engineering, Texas A & M
Member, Computer Committee, Dept. of Mechanical Engineering, Texas A & M
Member, Promotion and Tenure Committee, Dept. of Mechanical Engineering, Texas A
& M University, 1993-1997.
Member, Departmental Research Executive Committee, Texas A & M University, 19921994.
135
Member, College Alumni Honor Awards Committee, Texas A & M University, 19931994.
Member, University Planning Coordinating Committee, Virginia Polytechnic Institute,
1990-1991.
Co-Chairman, IUTAM Symposium on Local Mechanics Concepts for Composite
Material Systems, Oct. 27-31, 1991, Virginia Polytechnic Institute and State University,
Blacksburg, VA 24061 (with K. L. Reifsnider).
Member of the Organizing Committee of the Fourth Technical Conference on Composite
Materials, Virginia Polytechnic Institute and State University, Blacksburg, October 3-6,
1989.
Member, Organizing Committee, ASCE/EMD Speciality Conference, Virginia
Polytechnic Institute and State University, May 23-25, 1988.
Organizer and host, The ARO Workshop on Constitutive Models, Virginia Polytechnic
Institute and State University, Blacksburg, VA, March 24-26, 1986.
Chairman, Computational Methods Technical Interest Group, Virginia Polytechnic
Institute and State University, 1981-l985.
Member, Alumni Research Award Committee, Virginia Polytechnic Institute and State
Executive Member, Engineering Faculty Organization, Virginia Polytechnic Institute,
1981-1982.
Member, Promotions and Tenure Committee, Department of Engineering Science and
Mechanics, Virginia Polytechnic Institute, 1981-1984 and 1987-1990; Chairman, 19891990.
Member, Faculty Recruiting Committee, Department of Engineering Science and
Mechanics, Virginia Polytechnic Institute and State University, 1981-1982.
Member, Graduate Committee, Department of Engineering Science and Mechanics,
Virginia Polytechnic Institute and State University, 1982-1992.
Member, Long Range Goals Committee, Department of Engineering Science and
Mechanics, Virginia Polytechnic Institute, 1981-1992.
Member, Executive Cabinet, Department of Engineering Science and Mechanics,
Virginia Polytechnic Institute, 1987-1992.
Member, Local Arrangements Committee, IUTAM Symposium on Mechanics of
Composite Materials, Virginia Polytechnic Institute and State University, Blacksburg,
August 16-19, 1982.
Chairman of the Proceedings and Member of the Organizing Committee, the 21st
Annual Meeting of the Society of Engineering Science, Virginia Polytechnic Institute,
Blacksburg, Oct. 15-17, l984.
Chairman (1979-80) and Vice-Chairman (1978-79), Engineering Sciences Section,
Oklahoma Academy of Science.
Vice-Chairman, Membership, Central Oklahoma Section of ASME, 1976-77; Mem., Exec.
Comm., 1976-80.
Member, Executive Committee (Committee A), School of Aerospace, Mechanical and
Nuclear Engineering University of Oklahoma, 1978-1980.
Faculty Advisor, Student Section of ASME, University of Oklahoma, 1976-1979.
136
National and International
Head, Engineering Science Programme, National University of Singapore, Aug. 2006-Jul

2008.
Secretary of Fellows, American Academy of Mechanics (1993-1998)
Board of Directors, Society of Engineering Science (1991-1993)
Executive Committee of the International Association for Computational Mechanics
(IACM), Joint Secretary and Co-Editor (1991-93) and Editor (1993-present) of IACM
Bulletin.
The Executive Committee of the U.S. Association for Computational Mechanics
(USACM), member, 1988-1992 and 2012-present; Secretary (1991-1992); Treasurer (19921994); Vice-President (1994-1996); and President (1996-1998); Editor of USACM
Newsletter (1988-1993).
ASME Committee on Computing in Applied Mechanics, Applied Mechanics Division,
American Society of Mechanical Engineers, member (1981-1993); ViceChairman (19931995); Chairman (1995-1997).
Computational Methods Committee, Society of Engineering Science, member (19771983), Chairman (1983-1985)
ASME Committee on Composite Materials, American Society of Mechanical Engineers,
(member) 1982-present.
Mathematical Methods Committee, Engineering Mechanics Division, ASCE, (member)
1983-1987.
Elasticity Committee, ASCE, (member) 1985-1988.
Computational Mechanics Committee, ASCE, Member (1990-1992), Chairman (19921994).
Stability Committee, ASCE, Member (1992-present).
Executive Committee of the Engineering Mechanics Division, ASCE, Member (19921996); Chairman (1995-1996).
Advisory Board of the Engineering Mechanics Division, ASCE, Member (1996-2002);
Chairman (1997-1999).
Structures Technical Committee of AIAA, Member (1995-2000).
REVIEWER
Journals
Acta Mechanica
AIAA Journal
Applied Mechanics Reviews, ASME
Asian Journal of Civil Engineering
Commun. Appl. Numerical Methods
Composite Structures
Composites Science and Technology
Computational Mechanics
Computers & Structures
Computers & Fluids
Computer Methods in Appl. Mech.
and Engineering
Computing Systems in Engineering
137
Engineering Computations
Engineering Fracture Mechanics
Engineering Structures
Experimental Mechanics
European Journal of Mechanics: A.
Solids
Finite Elements in Analysis and
Design
Foundations of Physics
Indian Journal of Pure & Applied
Mathematics
Indian National Science Academy
Journals
Int. J. Computational Engineering

Science
Int. J. Engineering Analysis and
Design
Int. J. Engineering Science
Int. J. Mechanical Sciences
Int. J. Numer. Methods in Engng.
Int. J. Numer. Meth. Fluids
Int. J. Numer. Analytical Methods
Geomechanics
Int. J. Plasticity
Int. J. Solids and Structures
Int. J. Structural Stability and
Dynamics
Iranian Journal of Science and
Technology
J. Adhesion
J. Adhesion Science and Technology
J. Aeronautical Society of India
J. Aerospace Engineering of ASCE
J. Aircraft
J. the Acoustical Society of America
J. Applied Mechanics, ASME
J. Composite Materials
J. Composites Technology and
Research
J. Computational Physics
J. Computational Structures
Technology
J. Dynamic Systems, Measurement,
and Control
J. Elasticity
J. Engineering Mechanics, ASCE
J. Heat Transfer, ASME
J. Intel. Mater. Systems and
Structures
J. Mathematical and Physical
Sciences
J. Mechanics and Physics of Solids
J. Non-Linear Mechanics
J. Numerical Heat Transfer
J. Optimization Theory and
Applications
J. Pressure Vessel Technology, AME
J. Sound and Vibration
J. Structural Mechanics
138
J. Thermal Stresses
J. Thermophysics and Heat Transfer
J. University of Kuwait (Science)
J. of Vibration, Acoustics, Stress and
Reliability, ASME
Mathematics & Mechanics of Solids
Meccanica
Mechanics of Composite Materials
and Structures
Mechanics Research Commun.
Mechanism and Machine Theory
Numerical Methods for Partial
Differential Equations
Proceedings of the Indian Academy
of Sciences
Q. Applied Mathematics
Q. J. Mechanics and Applied
Mathematics
Sadhana (Indian Academy of
Sciences)
Shock and Vibration Bulletin
SIAM Journal of Scientific and
Statistical Computing
SIAM Review
Smart Materials & Structure
Structural Engineering and
Mechanics
Tectonophysics
ZAMM
Addison Wesley Publishing

Company
Advances in Water Resources
AIAA Book Reviews
Applied Mechanics Reviews
Army Research Office
ASME Press
ASTM Special Technical
Publications
Australian Research Council
CRC Press
Energy Research Center,
Morgantwon, WVA
John-Wiley & Sons, Inc.
Kluwer Academic Publishers
Kuwait Foundation for the
Advancement of Sciences
Longman Higher Education &

Reference
McGraw-Hill Book Company
NATO Collaborative Research
Grants Proposals
National Research Council, USA
National Research Council, Canada
National Research Council,
Australia
National Science Foundation

Springer-Verlag
Many more (not keeping track of

reviewer of recent journals)
139
CONSULTANT SERVICES
Aerojet (Strategic Propulsion Co.), Sacramento, CA

Alcoa Technical Laboratory, Alcoa Center, PA
Appl Engineering Company, Norman, OK
Atlantic Research Corporation, Gainesville, VA
Autoclave Engineers, Inc., Erie, PA
Battelle Laboratories, Research Triangle Park, NC
Bell Helicopter Textron Inc., Ft. Worth, TX
Computational Mechanics Company, Austin, TX
Concept Analysis, Plymouth, MI
Engineering Mechanics Research Corporation, Troy, MI
General Dynamics, Space Systems Div., San Diego, CA
Hartford Boiler and Insurance Company, Hartford, CT
Humana Medical City Dallas, Dallas, TX
Lockheed Aeronautical Systems Company, Marietta, GA
Omega Engineering Consultants, Coral Springs, FL
Owens/Corning Fiberglass, Granville, OH
RADIAN Corporation, Austin, Texas
Swanson Analysis Systems, Houston, PA
Technalysis Inc., Indianapolis, IN
Texas Tech University, Health Sciences Center, Lubbock, TX
The Hartford Steam Boiler Inspection and Insurance Co., Hartford, CT
University of Tennessee Space Institute, Tullahoma, TN
U.S. Army & Missile Command, Huntsville, AL
U.S. Tank Automotive Command (TACOM), Warren, MI
Technical University of Lisbon (as a member of the Scientific Advisory
Council that is responsible for the evaluation of five research programs)
Corning, Inc., Corning, New York
SHORTCOURSES TAUGHT
1.
2.
3.
4.
5.
6.
7.
Advances in Computational Fluid Dynamics, The University of Tennessee Space

Institute, Tullahoma, TN, December 1982 (with K. C. Reddy).
Finite Element Methods in Fluid Mechanics, Purdue University at Indianapolis, March
15-18, 1983 (with A. Ecer and H. Akay).
Finite Element Methods in Fluid Mechanics and Heat Transfer, Purdue University at
Indianapolis, March 12-16, 1984 (with A. Ecer and H. Akay).
An Introduction to the Finite Element Method, NASA Marshall Space Center,
Huntsville, Alabama, June 1987 (with K. C. Reddy).
140
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
Finite Element Calculation Methods and Their Application to Turbomachinery Flows,

von Krman Institute for Fluid Dynamics, Belgium, May 11-15, 1987 (with W. G.
Habashi).
Analysis of Laminated Composite Structures, The University of Tennessee Space
Institute, Tullahoma, TN, October 24-28, 1988.
Finite Element Method in Computational Fluid Dynamics and Heat Transfer, Purdue
University at Indianapolis, March 7-11, 1988 (with A. Ecer and H. Akay).
Introduction to the Finite Element Method, (EG-5520), 3M Company, Minneapolis,
MN, May 8-10, 1989.
Advanced Concepts in the Finite Element Method, (EG-5521) 3M Company, St. Paul,
MN, May 11-12, 1989.
University at Indianapolis, May 15-19, 1989 (with A. Ecer and H. Akay).
Introduction to the Finite Element Method, 3M Company, St. Paul, MN, Nov. 20-22,
1989.
The Finite Element Method in Engineering Science, Brakes India Ltd., Padi, Madras,
India, December 18-21, 1989.
Introduction to the Finite Element Method, 3M Company, St. Paul, MN, March 12-15,
1990.
University at Indianapolis, May 6-11, 1990.
An Advanced Course on the Finite Element Method, Michelin Americas Research and
Development Corporation, Greenville, SC, Sept. 17-21, 1990.
The Finite Element Method in Engineering Science, Holiday Inn, Cleveland, OH, July
15-19, 1991.
An Introduction to the Finite Element Method, U. S. Army Waterways Engineering
Experiment Station, Vicksburg, Mississippi, May 11-15, 1992.
The Finite Element Method in Computational Fluid Mechanics and Heat Transfer,
Concordia University, Montreal, Canada, May 18-22, 1992 (with W. G. Habashi).
The Finite Element Method in Engineering Science, Indian Institute of Science,
Bangalore, India, November 20-25, 1992.
Singer Island, Florida, October 11-15, 1993.
Purdue University at Indianapolis, September 11-16, 1994 (with A. Ecer and H. Akay).
Analysis of Laminated Composite Plates, NATO Sponsored short course presented at
Middle East technical University, Ankara, Turkey, December 3-9, 1994.
Finite Element Modeling of Smart Structures, at 1995 North American Conference on
Smart Structures and Materials, San Diego, February 25, 1995 (with Vasu V. Varadan).
Mechanics of Composite Materials and Structures, Defense Science Organization,
Ministry of Defense, Singapore, May 6-9, 1996.
Refined Theories and Finite Element Models of Laminated Plates, Centre for
Computational Mechanics, National University of Singapore, Singapore, December 6,
1996.
Applications of the Finite Element Techniques in Fluid Mechanics and Heat Transfer,
Bhabha Atomic Research Centre, Trombay, Mumbai, India, Dec. 16-20, 1996.
141
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
Mechanics of Laminated Composite Plates: Theory and Analysis, University of

Queensland, Brisbane, Australia, June 17-18, 1997.
Theory and Analysis of Laminated Composite Plates, University Putra Malaysia
(UPM), Serdang, Selangor, Malaysia, June 21, 1997.
The Finite Element Method in Engineering Science" National Aerospace Laboratory,
Bangalore, India, July 22-25, 1998.
Mechanics of Composite Materials and Structures, Defence Evaluation and Research
Agency (DERA), Rosyth Royal Dockyard, Dunfermline, Fife KY11 2XR, Scotland, U.K.,
September 6-11, 1998.
Nonlinear Finite Element Analysis of Structural Dynamics, Defence Evaluation and
Research Agency (DERA), Rosyth Royal Dockyard, Dunfermline, Fife KY11 2XR,
Scotland, U.K., August 22-25, 1999.
`Èngineering Design & Practice Using FEM, The City University of Hong Kong, Hong
Kong, June 14-19, 2001.
`Èngineering Design & Practice Using FEM, The City University of Hong Kong, Hong
Kong, June 14-19, 2001.
``Mechanics of Composite Materials and Structures, US-Brazil Workshop on Advanced
Materials, Rio de Janeiro, Brazil, June 9-10, 2004.
`Òn k-Version of the Finite Element Method, Short course presented at the WrightPatterson Air Force Base, OH, August 13-15, 2004.
Analysis of Composite Materials and Structures, Short course presented at the
National University of Singapore, August 24-25, 2004.
Structural Analysis and Failure Assessment of Composite Materials, Short course
presented (with R. Talreja and Kristofer Gamstedt) at the Royal Institute of Technology,
(KTH), Stockholm, Sweden, October 5-8, 2004.
Mechanics of Laminated Composite Materials and Structures, Short course presented
at the University Putra Malaysia (UPM), Kuala Lampur, Malaysia, December 20, 2004.
Linear and Nonlinear Finite Element Analysis, Short Course presented at the USAfrica Workshop on Mechanics and Materials, University of Cape Town, South Africa,
January 28, 2005.
An Introduction to the Finite Element and Finite Difference Methods with Applications
to Heat Transfer and Fluid Flow, National Geographical Research Institute (NGRI),
Hyderabad, India, May 16-19, 2005.
Least-squares Finite Element Formulations for Viscous Incompressible and
Compressible Flows, Workshop on Computational Methods in Structural Mechanics and
Fluid Flows (COSMECFLOWS), Osmania University, Hyderabad, India, December 5,
2005.
Mechanical Engineering Design, a course in Mechanical Engineering at University of
Calabria, Italy, March 13-17, 2006.
Nonlinear Finite Element Analysis, a short course presented at Green Park Hotel,
Chennai (organized by SAE India), December 14-16, 2006.
Laminated Composite Structures, a course in Mechanical Engineering at University of
Calabria, Cosenza, Italy, May 21-23, 2007.
Mechanics of Laminated Composite Materials and Structures, a course in DIMNP at
University of Pisa, Italy, May 16-20, 2007.
142
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
The Finite Element Method: Theory and Applications, a two-day course presented at
the Air Force Research Laboratory (AFRL), Wright-Patterson Air Force Base, Dayton,
Ohio, May 30-31, 2007.
A General Introduction to the Finite Element Method, Lectures presented in the PreInternational Conference Workshop on Advanced Finite Element Method and Computational
Techniques (ASFCT-2007), Manipal Institute of Technology, Manipal, India, August 29,
2007.
Nonlinear Finite Element Analysis, A pre-conference course held at the International
Conference on Computer Aided Engineering, Chennai, India, December 10-12, 2007.
How to Teach a Course on the Finite Element Method, two-day course taught at RMK
College of Engineering, Kavaraipettai, INDIA, December 13-14, 2007.
Advanced Finite Element Analysis, a four-day course held at Gayatri Vidya Parishad
College of Engineering, Visakhapatnam (AP), India, December 20-24, 2007.
Nonlinear Finite Element Analysis, a four-day short course presented at Cranes
Software, Bangalore, India, January 7-10, 2008.
An Introduction to the Finite Element Method, a one-day course presented at the
Padre Conceio College of Engineering, Agnel Ashram, Agnel Ganv, Goa, India,
January 13, 2008.
Nonlinear Finite Element Analysis with Applications, Bhabha Atomic Research
Centre, Bombay, India, January 14-16, 2008.
Mechanics of Composite Materials, a course in Mechanical Engineering at University
of Calabria, Italy, March 10-11, 2008.
The Finite Element Method with Applications to Solid and Structural Mechanics,
Bombay, India, August 19-22, 2008.
Chennai, India, August 26-29, 2008.
Singapore, September 1-3, 2008.
Finite Element Analysis with Applications to Solid and Structural Mechanics, Kuala
Lumpur, Malaysia, October 23-25, 2008.
Linear and Nonlinear Finite Element Analysis with Applications to Solid and Structural
Mechanics, Bhabha Atomic Research Centre (BARC), Bombay, India, Dec 4-9, 2008.
Mechanics, Vikram Sarabhai Space Center (VSSC), India, Dec 29-31, 2008.
Mechanics, Defense Research and Development Laboratory (DRDL), Hyderabad, India,
Jan 5-7, 2009.
Finite Element Analysis with Applications to Solid and Structural Mechanics,
Mumbai, INDIA, May 6-9, 2009.
An Introduction to the Finite Element Method, Bharat Heavy Electrical Limited,
Bangalore, India, May 11-14, 2009.
Buckling
of
Laminated
Composite
Plates: Theories
and
Analyses,
Department of Applied Mechanics, Finnish Graduate School of Engineering
Mechanics, Helsinki University of Technology, Helsinki, Finland, June 8-12, 2009.
A Short Course on the Finite Element Method, Dept. of Mechanical Engineering,
Universidad de los Andes, Bogota, Colombia, August 8-11, 2009.
143
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
79.
80.
81.
82.
83.
84.
85.
86.
87.
A Short Course on The Finite Element Method, South China University of

Technology, Wuhan, Guangzhou, China, Dec. 2-8, 2009.
The Finite Element Method An Advanced Course, Ritz-Carlton Hotel, Kuala
Lumpur, Malaysia, 8-10 February 2010.
The Finite Element Method Application to Composite Materials, Saint James &
Albany Hotel-SPA, Paris, France, 11-13 October 2010.
The Finite Element Method: with a Focus on Nonlinear Solid Mechanics, Novotel Sao
aulo Morumbi, Sao Paulo, Brazil, 1-3 December 2010.
The Finite Element Method An Introduction, South China University of Technology,
Wuhan, Guangzhou, China, 16-17 December 2010.
The Finite Element Method (with applications to heat transfer, fluid mechanics, and
solid mechanics), SRM University, Kattankulathur, Chennai, India, 22-24 December
2010.
Analysis of Composite Materials and Structures, Preconference Short course at
International Conference on Composites for 21st Century: Current & Future Trends, J.N. Tata
Auditorium, Indian Institute of Science, Bangalore, INDIA, 4 January, 2011.
Theory and Analysis of Laminated Composite Structures, a preconference course
presented during the 16th International Conference on Composite Structures (ICCS/16),
University of Porto, Porto, Portugal, 26-27 June 2011.
The Finite Element Method with Applications to Solids and Fluids, University of
Puerto Rico, Mayaguez, PR 00681-9045, March 22-23, 2012; organized by the Department
of Mechanical Engineering Department.
Theory and Analysis of Laminated Composite and Functionally Graded Structures,
16-17 June 2012, Torino, Italy.
"Theory and Analysis of Laminated Composite Structures," 17-18 October 2012,
University of Macau, Macau, China.
"The Finite Element Method - An Introduction", 19-21 October 2012, South China
University of Technology, Wuhan, Guangzhou, China,
The Finite Element Method (with applications to heat transfer, fluid mechanics, and
solid mechanics), 3-5 December, 2012; Sultan Qaboos University, Muscat, Sultanate of
Oman.
The Finite Element Method (with applications to heat transfer and fluid, solid, and
biomechanics) 12-15 December 2012, SRM University, Kattankulathur, Chennai, India.
Finite Element Method with Applications to Solid Mechanics, Heat Transfer and Fluid
Mechanics, 19-21 December 2012, Indian Institute of Technology, Hyderabad, INDIA.
Finite Element Method (with applications to heat transfer, fluid mechanics, and solid
mechanics), 3-5 March 2013, University of Guanajuato, Salamanca, Mexico.
Finite Element Method with applications to Heat Transfer and Solid and Fluid
Mechanics, 21-23 March 2013, National Institute of Technology, Tiruchirappalli, India.
Recent Developments in Beam and Plate Theories (with focus on FGM, nonlocal
elasticity, and microstructural length scale effects), 10 June 2013, Celal Bayar
University, Manisa, Turkey.
Recent Developments in Theory and Analysis of Laminated Composite and
Functionally Graded Beams, Plates, and Shells (with focus on nonlocal elasticity,
modified couple stress theories, and peridynamics), 15-16 June 2013, a preconference
course presented during the ICCS17-17th International Conference on Composite Structures,
Porto, Portugal, June 17-21, 2013.
144
88.
Advances in Nonlinear Structural Mechanics Modelling and Finite Element

Simulation of Isotropic, Composite and Smart Structures, 16-20 September 2013,
Aachen, Germany (cotaught with Dr. Rudiger Schmidt).
89.
Advanced Finite Element Analysis, 16-18 December 2013, Computer Aided

Engineering Laboratory, Department of Mechanical Engineering, Indian Institute of
Technology-Madras, Chennai, India.
90.
Nonlinear Finite Element Analysis (with Applications to Solid Mechanics, Fluid

Mechanics and Heat Transfer), 26-28 December 2013, Indian Institute of Technology,
Hyderabad, India.
91.
Recent Developments in the Analysis of Laminated Composite and Functionally

Graded Beams, Plates, and Shells (with focus on nonlocal elasticity, modified couple
stress theories, and peridynamics), 7-8 June 2014, Hilton Stony Brook, New York (A
preconference course presented during the First International Conference on Mechanics of
Composites, Stony Brook University, Long Island, USA, June 8-12, 2014).
145

Reddy CV 2013

Uploaded by

Copyright:

Available Formats

Reddy CV 2013

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Reddy CV 2013

Uploaded by

Copyright:

Available Formats

Resume of J.N.

Resume of J.N. Reddy

Resume of J.N. Reddy

RESEARCH BACKGROUND AND INTERESTS

Resume of J.N. Reddy

HONORS AND AWARDS

Resume of J.N. Reddy

Resume of J.N. Reddy

Resume of J.N. Reddy

Outstanding People of the 20th Century, l998.

Resume of J.N. Reddy

Outstanding Faculty Achievement in Research (the FIRST recipient), University of Oklahoma,

EDITORSHIP OF ARCHIVAL JOURNALS AND SERIES

Editor-in-Chief, Mechanics of Advanced Materials and Structures (formerly, Mechanics of

Editor-in-Chief, International Journal for Computational Methods in Engineering Science and

Editor-in-Chief (with Y. B. Yang and C. M. Wang) International Journal of Structural

MEMBERSHIP ON EDITORIAL BOARDS OF JOURNALS

Resume of J.N. Reddy

Editor, USACM Newsletter, the U.S. Association of Computational Mechanics, 1988-1993.

Associate Editor, Journal of Applied Mechanics, American Society of Mechanical Engineers,

Scholarly Research Exchange, Hindawi Publishing Corporation (www.hindawi.com),

Manufacturing Technology & Research, An International Journal, Birla Institute of Technology,

Resume of J.N. Reddy

Resume of J.N. Reddy

KEY NOTE AND PLENARY LECTURES AND SPECIAL SEMINARS DELIVERED

J.N. Reddy, Nonlinear Analysis of Layered Composite Structures, FEMSA/83

J.N. Reddy, On Computational Schemes for Global-Local Stress Analysis, Workshop on

J.N. Reddy, Finite Element Models of Fluid Flow, International Symposium on

J.N. Reddy, On Refined Theories of Composite Laminates, Alcoa Laboratories,

J.N. Reddy, An Overview of Computational Methods in Composites, Keynote

J.N. Reddy, On New Developments in the Refined Theories of Plates, New

J.N. Reddy, Modeling of Delamination in Composite Laminates Using a Layer-Wise

Resume of J.N. Reddy

J.N. Reddy, Current Research in the Modeling of Laminated Composite Structures,

J.N. Reddy, Finite Element Modeling of Structural Vibrations: Recent Developments,

J.N. Reddy, Global-Local Analysis of Composite Laminates Using Hierarchical Finite

J.N. Reddy, Analysis of Composite Laminates Using Variable Kinematic Finite

J.N. Reddy, Global-Local Computational Methodologies for the Analysis of Composite

J.N. Reddy, On Computational Strategies for the Analysis of Thick Composites,

J.N. Reddy, Recent Developments in the Modeling of Laminated Composite

J.N. Reddy, An Evaluation of Equivalent-Single-Layer and Layerwise Theories of

J.N. Reddy, A Multiple Model Approach for Laminated Composite Structures,"

J.N. Reddy, An Hierarchical Mulit-Model Approach to the Analysis of Laminated

J.N. Reddy, Recent Developments in the Modeling of Composite Structures," Keynote

Resume of J.N. Reddy

J.N. Reddy, A Computational Methodology for Global-Local Analysis of Composite

J.N. Reddy, Recent Developments in Mechanics of Composite Materials," Keynote

J.N. Reddy, Developments in Computational Structural Dynamics," Keynote Lecture,

J.N. Reddy, Recent Developments in Mechanics of Smart Structures," Plenary Lecture,

J.N. Reddy, Computational Mechanics: Current Trends and Future Directions,

J.N. Reddy, An Overview and Recent Developments in Vibrations of Laminated

J.N. Reddy, Future Directions in Computational Methods and Simulations, Keynote

J.N. Reddy, Recent Developments and Future Directions in Theoretical and

J.N. Reddy, Developments in Structural Dynamics with Special Focus on Shear

J.N. Reddy, Developments in Theoretical and Computational Mechanics of Composite

Resume of J.N. Reddy

J.N. Reddy, On Computational Modeling of Functionally Graded Materials and Smart

J.N. Reddy, ``Computational Modeling of Advanced Materials and Structures, C. S.