Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Manual ID 800

    Uploaded by

    akibae
    This document provides instructions for using an IDL-800 digital logic prototyping system. It describes the various components of the system including a function generator, voltmeter, breadboarding area, switches to control logic levels, and displays to monitor output. The summary provides an overview of the key components and their functions: The IDL-800 logic prototyping system allows users to create and test digital circuits using components like a function generator, voltmeter, breadboarding area, switches to control logic levels, and displays to monitor output. It provides power sources, switches to set logic levels, and LED displays to observe output for testing circuits on a breadboarding area. The document provides detailed instructions on using each component and setting

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Manual ID 800

    Uploaded by

    akibae
    1K views7 pages
    This document provides instructions for using an IDL-800 digital logic prototyping system. It describes the various components of the system including a function generator, voltmeter, breadboarding area, switches to control logic levels, and displays to monitor output. The summary provides an overview of the key components and their functions: The IDL-800 logic prototyping system allows users to create and test digital circuits using components like a function generator, voltmeter, breadboarding area, switches to control logic levels, and displays to monitor output. It provides power sources, switches to set logic levels, and LED displays to observe output for testing circuits on a breadboarding area. The document provides detailed instructions on using each component and setting

    Original Description:

    Diseño Digital

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for using an IDL-800 digital logic prototyping system. It describes the various components of the system including a function generator, voltmeter, breadboarding area, switches to control logic levels, and displays to monitor output. The summary provides an overview of the key components and their functions: The IDL-800 logic prototyping system allows users to create and test digital circuits using components like a function generator, voltmeter, breadboarding area, switches to control logic levels, and displays to monitor output. It provides power sources, switches to set logic levels, and LED displays to observe output for testing circuits on a breadboarding area. The document provides detailed instructions on using each component and setting

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    1K views7 pages

    Manual ID 800

    Uploaded by

    akibae
    This document provides instructions for using an IDL-800 digital logic prototyping system. It describes the various components of the system including a function generator, voltmeter, breadboarding area, switches to control logic levels, and displays to monitor output. The summary provides an overview of the key components and their functions: The IDL-800 logic prototyping system allows users to create and test digital circuits using components like a function generator, voltmeter, breadboarding area, switches to control logic levels, and displays to monitor output. It provides power sources, switches to set logic levels, and LED displays to observe output for testing circuits on a breadboarding area. The document provides detailed instructions on using each component and setting

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 7

    IDL-800 DIGITAL LAB

    Probador lgico
    El principal propsito de este evaluador de circuitos es proveer convenientemente a los usuarios de
    una fuente de CD, un generador de funciones, un vltmetro digital, un arreglo 8 bits de LEDs, dos
    displays de 7 segmentos y switches lgicos, todo en el mismo aparato. Permite tambin crear una
    interface entre ste equipo e instrumentos perifricos a travs de los adaptadores tipo banana y
    BNC que trae integrados.

    IDL-800 Prototyping System


    TheIDL800logicpanelsarepowerfultoolsforanylogicdesigner.They
    enableawiderangeofICstobeusedinabreadboardexperiment.
    I.

    Quick Overview of IDL Prototyping Unit

    A.BecomefamiliarwiththeIDL800chassisNotethattherearpanel
    (forwardfacingnearverticalpanelatthebackofunit)containsthe
    masterpoweronoffswitch.Inaddition,theleftsideofthepanel
    containsafunctiongeneratorwhichcangenerateanelectricalsignal
    inthreeforms:sinusoidal,triangular,andsquarewave.Boththe
    frequencyandamplitudecanbevaried.Ontherightsideofthepanel,
    thereisadigitalvoltmeterthatcanmeasurevariousvoltagesapplied
    tocircuits.Notethatthevoltmetercanbeconnectedeithertobanana
    plugsorthesmallwireconnectorsthatareusedtoconnectcircuit
    pinstogether.
    B.StudytheflatportionoftheIDL800chassis.Ontheleftsideare
    two+5VDC(nonvariable)poweroutputs,plusavariableDCsupplywith

    outputsof015and0(15)V.Ontherightarewireconnectortobanana
    plugadaptersandotherinputs(whichwillnotbeusedinthis
    lab).Atthebottomaresomefunctionswitchesthatcanapply+/ 5V,

    andtwopulseswitcheswhichwillapplya1(5V)or0(0V)aslongas
    theyarehelddown.Therearealso8dataswitchesthatcanbe
    switchedtoapply1or0(5Vor0V)toanyinput.Attherearofthe
    flatboardaredataindicators,includingtwosevensegmentdisplays
    whichwilldisplaynumbers,and8lightemittingdiode(LED)indicators
    whichcanbeconnectedtocircuitpinstoindicatewhetheraone(5V)
    ora0(0V)ispresent.A1willlightuptheLED;a0turnsitoff.
    C.Thecenteroftheflatchassisareaistheprototypeboard.Atthetop
    andbottomarepowerbusses.Whentheseareconnectedbythesmall
    solidcopperwirestooneofthesupplies(redto+,bluetogroundor
    0),alltheotherholesintherespectivelinesconnecttothatvoltage
    element.
    D.Notethattheprototypeboardcontainstwomainareasofpins.Whena
    chipispluggedintoanysetofpinsinsuchawaythatitbridgesthe
    widespaceinthemiddleofeachpingroup,allpinholesineach
    verticalcolumnwhichcontainsachippinarealsoconnectedtothat
    pin.Thusothercomponents,inputs,orvoltagescanbeconnectedto
    eachpinofthecircuitbeingevaluated.

    E.Takesometimetostudythechassis,andaskquestionsofthe
    instructororTAifnecessary.

    II. IDL Control Panels (Used)


    A.PowerSourcePanel:Thepowersourcepanelisdirectlytotheleftof
    thebreadboard.YouwilluseittopowerandgroundyourICs.There
    isa+5V hole nexttoeachpowerbusstripandaground hole nextto
    eachgroundbusstrip.Connecttheseholestothebusstripswhenyou
    conductyourexperiments.
    Donot usethe+V,-5V,orV holes.Yourexperimentwillnotwork.
    B.3WaySwitchPanel:The3wayswitchpanelisdirectlybelowthepower
    sourcepanel.Youwillusetheseswitchestoprovideaconstantsignal
    of0or1,thatyoucanchangeovertime.

    Theseswitcheshavethreesettings:+5V,0V,and5V.Usethe0V
    settingtorepresent0andthe+5Vsettingtorepresenta1.
    Bothoftheholesnexttoeachswitchareoutputholes.
    C.PulseSwitchPanel:Thepulseswitchpanelisdirectlytotherightof
    the3wayswitchpanel.Useittosupplyasignalthatisazeromost
    ofthetimeandmomentarilya1.
    Youcanalsouseittosupplyasignalthatis1mostofthetimeand
    momentarily0.Thiscanbehandyasaslowmotionclocksignal.
    TheholesnexttoAandBprovide0untiltheswitchispressed.A1is
    momentarilyprovidedandthenthesignalgoesbackto0.Theholes
    nexttoA(Acomplement)andB(Bcomplement)provide1untilthe
    switchispressed.A0ismomentarilyprovidedandthenthesignalgoes
    backto1.
    Bothoftheholesnexttoeachswitchareoutputholes
    D.8bitDataSwitchPanel:The8bitdataswitchpanelisdirectlyto
    the
    rightofthepulseswitchpanel.Youcanuseanyoftheswitchesto
    provideaconstantsignalof1or0.Theonlydifferencebetweenthese
    switchesandthe3wayswitchesisthattheseswitchescantsupplya
    5Vsignal.
    Bothoftheholesnexttoeachswitchareoutputholes
    E.8BitDataDisplayPanel:The8bitdatadisplaypanelisdirectly
    belowthedigitalvoltmeterpanel.Thispanelallowsyoutoobservethe
    valueof8differentsignalatthesametime.Ifa0issuppliedtoa
    datadisplay,thelightwillbeof.Ifa1issuppliedtoadata
    display,thelightwillbeon.
    Therearetwoholesforeachdatadisplay.Usetheleftholeforinput
    tothedisplayandtherightholetosendthesignaltosomeother
    locationifrequired.

    F.SignalGenerationPanel:Thesignalgenerationpanelislocatedinthe
    upperlefthandcorneroftheIDLpanel.Itcontains:
    a.TheON-OFF switchfortheentirelogicpanel
    b.AdiallabeledAmplitude whichcontrolstheintensityofthe8
    bitdatadisplaylamps.
    c.Aswitchwith5differentFrequency-range settings.
    d.ADiallabeled1-10whichcontrols/adjuststheoutputfrequency
    withaselectedrange.
    e.AholelabeledOut.Whenyouwanttosetupaperiodicclock
    signalconnectawirefromthisholetoyourcircuit(08V).
    f.Aswitchwhichselects3differentSignal-waveform settings.
    Keepthisswitchatthesquarewavesetting.

    III. IDL Control Panels (Not used)


    A.DigitalVoltmeterPanel:Thedigitalvoltmeter(DVM)panelisinthe
    upperrighthandcorneroftheIDLpanel.Youwillnotusethispanel
    inyourexperimentssincetheonlyvoltagesweareusingare0Vand5V.
    B.SevenSegmentDisplayPanel:Thesevensegmentdisplaypanelis
    directlybelowthesignalgenerationpanel.Youwillnotusethispanel
    inyourexperiments.
    C.AdapterPanel:TheAdapterpanelisdirectlytotherightofthe

    breadboard.Youwillnotusethispanelinyourexperimentssinceit
    hastodowiththereceivingsignalsfromexternalsources.

    IV. IDL Logic Panel


    A.BusStrips:Therearepairsofbusstripsonthetop,middle,and
    bottomofthebreadboard.Theredlineisnexttooneofthebusstrips
    ineachpair,andabluelinenexttotheotherbusstrip.Usethebus
    stripnexttotheredlineforpower(+5V).Usethebusstripnextto
    thebluelineforground.
    Therearetwogroupsofconnectedholesonabusstrip.Onegroup
    startsathole#3onthebreadboardandendsathole#31.Theother
    groupstartsathole#34onthebreadboardandendsathole#62.
    Whenyousupplypowertohole#3youautomaticallysupplypowertoall
    theotherholesinthatgroup.Thismeansyoucanuseshortwiresto
    powerandgroundyourICs.
    Caution: Sincethetwogroupsofconnectedholesarenotconnectedto
    eachother,connectthembyplacingoneendofashortjumperwirein
    hole#31andtheotherendinhole#34ofthebusstrip.
    B.ICConnections:Inbetweenthebusstripstherearetwo10X64matrices
    ofholes.IneachmatrixtherowsareassignedthelettersAJandthe
    columnsarenumbered164.ThereisachannelrunningbetweenrowsE
    andF.WhenyoubuildyourlogiccircuitshalfofthepinsoftheIC
    willbeinrowEandtheotherhalfwillbeinrowF.
    Foranygivencolumn,theholesfromrowsAEareconnectedandthe
    holesfromFJareconnected.Thismakesiteasytosendtheoutputof
    aparticularpinofanICtouptofourdifferentlocations.For
    example,supposeyouhaveanICwithanoutputpininhole#E25.If
    youinsertawireinA25,B25,C25,orD25theotherendofthe
    wirewillhavethesamevoltageasthatoutputpin,E25.

    V. Guidelines to Setup Logic Panel


    UsethewiringsetupprocedureprovidedintheLABASSIGNMENT
    sheet.Ifonehasnotbeenprovidedoryouareconnectingyouown
    designyoumayusethefollowingstepsasaguide:
    1.MakesuretheIDLlogicpanelisturnedoff.
    2.Connectthetwogroupsofeachbusstripbyplacingashort
    wirefromhole#31tohole#34oneachbusstrip.
    3.Connectpowertoeachbuspowerstrip.
    4.Connectgroundtoeachgroundbusstrip.
    5.Findthefirstchipinyourcircuit.
    6.First,groundthechipbyconnectingthechipsgroundpin,
    normallypin7(checkICdiagram),tothenearestgroundbus
    strip.
    7.Next,supplypowertothechipbyconnectingthechipspower
    pin,Vcc,normallypin14(checkICdiagram),tothenearest
    powerbusstrip.
    8.Repeatsteps57foreachICinyourcircuit.
    9.MakeconnectionsbetweentheICaccordingtoyourcircuit
    design(ortheinstructionsontheLABASSIGNMENTsheets).

    10.Finally,turntheIDLlogicpanelon andconductthe
    experiment.
    Note:Ifnopower,checkthattheworkbenchselectricalplug
    striphasalsobeenturnedon.
    VI. IC Hardware Configurations
    1.TheICsusedinthislabareTTLlogicpartswhichcontain
    multiplecopies,2,4,6,or8,ofalogicgate.
    2.Thechipsmayhave14,16,18,22,ormorepinsforaccessingthe
    logicfunctions.Thepinsprovideforaccesstothelogic
    operatorsinputandoutputsignals,andthechipspowervoltage
    (Vcc)andground.

    3.Eachchiphasanotch(ordimple)ononeend.Thepinsarenumber

    counterclockwisestartingwithpin1.Pin1isalwaysthefirst
    physicalpintotheleftofthechipsnotchwhenviewedfrom
    above.
    ChecktheICsdatasheettodeterminewhichpinsareusedfor
    powerandgroundconnection.Donotconnectthesevoltages
    backwards.ThisistheeasiestmethodtodestroyanIC.
    ICsaresusceptibletostaticelectricitybutareotherwisevery
    rugged.YouTAwillshowyouhowprotecttheICs.Unfortunately
    thelabsdonothavegroundingstraps.
    4.CaremustbetakenwhenpluggingICsintothebreadboard.The
    pinsareeasilybentandmaybreakoff.Especiallyiftheyhave
    beenbentinseveralpreviouslabs.ICsmaybeharderto
    installiftheyarenew.Therowsofpinspointslightly
    outward,awayfromeachother.Wheninsertingthechip,tipit
    slightlytothesideandstartthepinsfromonesidefirst.
    Whentheyareintheirrespectiveholes,tiptheothersidedown.
    Ifthepinsarenotquitealignedapplyasmallamountof

    pressureorevenuseapenciltohelpadjustindividualpins.If
    youhavetoforceitsomethingiswrong!Stopandtryagain.
    5.TheIDL800sareruggedbutneedyourspecialattention.Wires
    orpins,whilebeinginsertedintoholesonthecontrolpanelor
    thebreadboardarea,maybebrokenoffintheseholes.TheIDL
    maynolongerbeuseable.TheIDLunithasredundantholesbut
    thoseareonlyatemporaryfixandmayprohibitsomeofthemore
    complexexperimentslaterinclasswheremultipleconnectionsare
    needed.InformyourTAofanysuchproblemsthatyoudiscover.

    You might also like