PW 100 PIR Watt Stopper

12:
SENSORS
00
PW-100 Passive Infrared Wall Switch Occupancy

Sensor
High sensitivity and dense
coverage for exceptional
performance
Selectable operation, walk-through, test

and presentation modes for increased
energy savings and convenience
No neutral wire required

Color-matched lens and
low profile for appealing design
Defaults to Manual-ON operation

for maximum energy savings
PROJECT
LOCATION/TYPE
Occupancy & Vacancy
Product
Overview
Description
Manual-on Control
The
PW-100 passive infrared (PIR) wall switch
sensor can turn lights OFF and ON based on
occupancy. It is characterized by high sensitivity to
small and large movements, appealing aesthetics,
and a variety of features.
Factory default operation is for Manual-ON, so

that users turn lights on only when needed. This
control strategy is proven to save more energy
than Auto-ON, and is in ASHRAE 90.1-2010. If
desired, the PW-100 may be reconfigured to turn
lights on automatically.
Operation
The PW-100 replaces existing wall switches and
fits in a single gang junction box. It uses advanced
PIR technology to detect occupancy and keep
lighting ON when it is needed. Once the space is
vacated and the time delay elapses, lights automatically turn OFF. DIP switch settings allow for a
variety of control options such as Auto-ON operation, walk-through and test modes.
Features
Detection Signature Processing eliminates false

triggers and provides immunity to RFI and EMI
www.wattstopper.com
800.879.8585
The PW-100 sensor is well suited for small,

enclosed spaces with clear line of sight of the
occupant. Common applications include small
office, small conference room and lunch/break
rooms.
Zero-crossing for long relay life
In automatic mode, sensor returns automatically to Auto-ON after lights are turned off
manually; ideal for presentations
Vandal resistant lens combines precise coverage with durability
LED indicates occupancy detection

Optional light level sensing with simple setup
Choice of Manual-ON or Auto-ON operation
Service mode allows sensor to operate as a

service switch in the unlikely event of a failure
Selectable walk-through mode turns lights off

three minutes after the room is initially occupied
if no motion is detected after the first 30 seconds
C43
Applications
Sensor coverage tested to NEMA Guide

Publication WD 7-2000
Test mode allows quick and easy adjustments
Compatible with decorator wall plates
Selectable audible and/or visual alerts for

impending shutoff
Qualifies for ARRA-funded public works projects
12:
00
Specifications
PW-100: 120/277 VAC; 50/60 Hz

@ 120 VAC, 0-800 W ballast or tungsten,1/6 hp
@ 277 VAC, 0-1200 W ballast
PW-100-347: 347 VAC; 50/60Hz; 0-1500 W
ballast
Time delays: 5, 10, 15, 20, 25 or 30 minutes, walkthrough, test-mode
Product Controls
Coverage: Major motion 35 x 30

Minor motion 20 x 15
Sensitivity adjustment: PIR (high/low)
Dimensions: 2.73 x 1.76 x 1.83
(69.3mm x 44.7mm x 46.5mm) L x W x D
ULand cUL listed
Five year warranty
DIPSwitch Settings
ON/OFF Button
Time Delay
TRIG GE R
ON
5 minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
Service
ALE R TS
R LY 1 M AN
R LY 2 MA N
DEL AY
WALK
PIR 50 %
Test
DIP Switches
Walk-Through
Walk-Through
Audible Alerts
PIR Sensitivity
PIR Sensitivity
High
Low, 50%
Disabled
Enabled
Visible Alert
Disabled
Enabled
Service bypasses occupancy

& light level functions. Control the
load manually using ON/OFF button.
Detection LED
ON Mode
Visible
Not Used
Alerts
Time
Delay
1 2 3
SENSORS
Controls &
Settings
Audible Alert
Disabled
Enabled
ON Mode
Auto On
Manual On
Switch 9 is not used
=ON
=OFF
=Factory Setting
PIR Lens
Coverage &
Wiring
Coverage Pattern
Wiring Diagrams
Neutral
Major motion
Load
Minor motion
PIR
Coverage
Line
35
(10.6m)
Red
Black
Ground
Green
20
(6.1m)
15
(4.5m)
7.5
(2.2m)
4
(1.2m)
0
Ordering
Information
20
(6.1m)
35
(10.6m)
For best performance, WattStopper recommends

using this sensor in spaces no larger than 15 x 12.
Catalog No. Color Voltage

PW-100-W
PW-100-W-U
White
PW-100-LA
Lt.Almond
PW-100-I
PW-100-I-U
Ivory
PW-100-G
Grey
Load Rating
120/277 VAC; 50/60 Hz
@ 120 VAC, 0-800 W ballast or tungsten,1/6 hp
2-wire sensor; no neutral
@ 277 VAC, 0-1200 W ballast
connection
PW-100-B
Black
PW-100-347-W
White
347 VAC; 50/60 Hz
PW-100-347-LA
Lt.Almond
2-wire sensor; no neutral
PW-100-347-I
Ivory
connection
PW-100-347-G
Grey
PW-100-347-B
Black
Occupancy & Vacancy
Ground
Green/Yellow
0-1500 W ballast
Order wall plate separately.

-U = ARRA compliant. Product produced in the U.S.
Pub. No. 23305 rev. 5/2013
www.wattstopper.com | 8 0 0 . 8 7 9 . 8 5 8 5
C44

PW 100 PIR Watt Stopper

Uploaded by

Copyright:

Available Formats

PW 100 PIR Watt Stopper

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PW 100 PIR Watt Stopper

Uploaded by

Copyright:

Available Formats

12:

PW-100 Passive Infrared Wall Switch Occupancy

Selectable operation, walk-through, test

No neutral wire required

Defaults to Manual-ON operation

Occupancy & Vacancy

Factory default operation is for Manual-ON, so

Detection Signature Processing eliminates false

The PW-100 sensor is well suited for small,

Zero-crossing for long relay life

Vandal resistant lens combines precise coverage with durability

LED indicates occupancy detection

Choice of Manual-ON or Auto-ON operation

Service mode allows sensor to operate as a

Selectable walk-through mode turns lights off

Sensor coverage tested to NEMA Guide

Test mode allows quick and easy adjustments

Compatible with decorator wall plates

Selectable audible and/or visual alerts for

Qualifies for ARRA-funded public works projects

PW-100: 120/277 VAC; 50/60 Hz

Coverage: Major motion 35 x 30

Service bypasses occupancy

Switch 9 is not used

For best performance, WattStopper recommends

Catalog No. Color Voltage

120/277 VAC; 50/60 Hz

@ 120 VAC, 0-800 W ballast or tungsten,1/6 hp

2-wire sensor; no neutral

@ 277 VAC, 0-1200 W ballast

347 VAC; 50/60 Hz

2-wire sensor; no neutral

Occupancy & Vacancy

Order wall plate separately.

Pub. No. 23305 rev. 5/2013

You might also like