590 Safety Manual

ATLAS COPCO
Drilling Solutions
SAFETY MANUAL
MODEL: ECM590/592
Carefully read all safety messages in this manual and on your

machines safety labels. Keep safety labels in good condition. Replace
all missing or damaged safety labels.
Learn how to operate the machine and how to use the controls
properly. Do not let anyone operate this machine without proper
instruction.
If you do not understand any part of this manual and need assistance,
contact your local Atlas Copco dealer.
The Safety Labels shown in this manual and on the machine are for
operator protection. Replacement Safety Labels can be obtained at no
cost from your local Atlas Copco dealer or representative or by
contacting the factory at:
Atlas Copco Company

Drilling Solutions
2100 North First Street
Garland, TX 750402288
(972) 4967400
The position of the Safety Labels shown in this manual are the same
for all 700 Series machines unless otherwise noted.
DANGER IS USED TO INDICATE THE PRESENCE OF A

HAZARD WHICH WILL CAUSE SEVERE INJURY OR
DEATH IF THE WARNING IS IGNORED.
WARNING IS USED TO INDICATE THE PRESENCE OF A

HAZARD WHICH CAN CAUSE SEVERE INJURY OR
DEATH IF THE WARNING IS IGNORED.
CAUTION IS USED TO INDICATE THE PRESENCE OF A

HAZARD WHICH WILL OR CAN CAUSE PERSONAL
INJURY, OR PROPERTY DAMAGE IF THE WARNING IS
IGNORED.
Notice is used to notify people of installation, operation, or

maintenance information which is important but not hazard
related.
SAFETY MANUAL MUST BE KEPT

WITH MACHINE AT ALL TIMES.
REPLACE SAFETY MANUAL WHEN
LOST OR DAMAGED.
SAFETY MANUAL
INSIDE
51792414
51777357
Back Of
Cylinder
Mount
Back Of
Guide
NOTE: IF NO ROD BOX, MOUNT
TO PLATE BEHIND ROD BOX
51993145
51777373
51777373
CALIFORNIA
PROPOSITION 65 WARNING
DIESEL ENGINE EXHAUST AND SOME OF ITS
CONSTITUENTS ARE KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER, BIRTH
DEFECTS, AND OTHER REPRODUCTIVE HARM.
51996593
Passengers on moving
machine.
51949691
51777456
Both Sides
Of Carousel
Pivot
51777456
To Left Side
Of Console
Fall Hazard.
Do not use this as a step.
52326428
51949709
WARNING
Improper operation
of this equipment can cause
severe
injury or death.
Read safety instructions

supplied with this
equipment before
operating or servicing.
52292844
WARNING
Modification or
alteration of this
machine
can result in severe
injury or death.
ADVERTENCIA
La modificacin or alteracin de esta
mquina puede resultar en lesionamiento
grave o la muerte.
No cambie o modifique
esta mquina sin el consentimiento expreso por
escrito del fabricante.
WARNUNG
Eine Modifikation
oder nderung dieser Maschine kann zu
schweren Verletzungen oder zum Tod
fhren.
Diese Maschine darf ohne

ausdrckliche schriftliche
Zustimmung vom Hersteller
nicht gendert oder modifiziert werden.
Do not alter or modify

this machine without
the express written
consent of the
manufacturer.
AVERTISSEMENT
Des modifications
cette machine peuvent
causer des blessures
graves ou la mort.
Napportez aucune
modification cette machine sans laccord crit
du fabricant.
AVVERTENZA
Modifiche o alterazioni
di questa macchina.
Possono causare
infortuni gravi o morte.
Non alterare o modificare

questa macchina senza
aver prima ottenuto lespresso consenso scritto
del fabbricante.
52292851
51778876
51917904
51777704
51792695
51792695
51792695
51792695
51792695
51777464
Side of Cooler
Through Rear
Access Door
51357408
51357408
51777381
INSIDE DOOR
51777381
51777449
Each Side Of Boom
51777365
51778868
Avoid injury from

airborne particles.
Shut down engine before
washing cooler fans.

INSIDE DOOR
51777407
51777407
51777407
51777407

51777407
Through Rear
Access Door
51777407
51777415
51777415
51777415
Next To Regulator
On Dust Collector
51777415
51985968
51985968
POWER UNIT ENCLOSURE (REF.)
DUST COLLECTOR (REF.)
51985968
51780906
Tram only with boom

fully retracted.
51777423
51991867
SAFETY DEVICES
Keep all safety devices on your machine in proper
working condition. Unauthorized modifications to
these devices may impair the function and/or safety
of the machine.
Make sure all safety devices, including shields are
installed and functioning properly.
Visually inspect the machine daily before starting
the machine. Do not operate the machine with
loose, worn, or broken parts.
Operate all safety devices to ensure proper working
order.
If you do not understand any part of this manual and
need assistance, contact your local Atlas Copco
dealer.
TRAM CONTROL CONSOLE (MOUNTED TO FRAME)
Emergency Stop Button This button is used to shut

down the machine in an emergency situation.
Pushing this button will stop the machine completely. To
release the button after being pressed; twist and pull up on
the button to release it from its engaged or shutoff position.
DRILL CONSOLE (MOUNTED ON BOOM)
Emergency Stop Button This button is used to shut

down the machine in an emergency situation.
Pushing this button will stop the machine completely. To
release the button after being pressed; twist and pull up on
the button to release it from its engaged or shutoff position.
Atlas Copco Drilling Solutions, LLC

A Company Within the Atlas Copco Group
P.O. Box 462288, 2100 North First Street
www.atlascopco.com/drillingsolutions

590 Safety Manual

Uploaded by

Copyright:

Available Formats

590 Safety Manual

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

590 Safety Manual

Uploaded by

Copyright:

Available Formats

What safety hazards are mentioned in the manual?

What safety hazards are mentioned in the manual?

What are some of the safety devices described?

What are some of the safety devices described?

ATLAS COPCO

Carefully read all safety messages in this manual and on your

Atlas Copco Company

DANGER IS USED TO INDICATE THE PRESENCE OF A

WARNING IS USED TO INDICATE THE PRESENCE OF A

CAUTION IS USED TO INDICATE THE PRESENCE OF A

Notice is used to notify people of installation, operation, or

SAFETY MANUAL MUST BE KEPT

Read safety instructions

Diese Maschine darf ohne

Do not alter or modify

Non alterare o modificare

Each Side Of Boom

Avoid injury from

POWER UNIT ENCLOSURE (REF.)

DUST COLLECTOR (REF.)

Tram only with boom

TRAM CONTROL CONSOLE (MOUNTED TO FRAME)

Emergency Stop Button This button is used to shut

DRILL CONSOLE (MOUNTED ON BOOM)

Emergency Stop Button This button is used to shut

Atlas Copco Drilling Solutions, LLC

You might also like