MODULE 24
ARRAYING
LEARNING OUTCOME
After the completion of this module, you will be able to:
Utilize the ARRAY command to enhance drawing productivity.
Arraying
There are commands in AutoCAD that can be used to increase your drawing
productivity and ARRAY is one of them. You can use this command to produce
copies of an object in rectangular and circular patterns.
Using the Array Command
The ARRAY command is used to create copies of objects in rectangular or polar
(circular) patterns.
Command
Keyboard input / Alias
Array
Array / AR
Icon
Menu
Modify > Array
When you start the ARRAY command, the ARAAY dialogue box is prompted. In
this dialogue box, you have two options:
Rectangular Array
Polar (circular) Array
AutoCAD 2D II
- 74 -
Module 24: Arraying
Institute of Applied Technology
Rectangular Array
The following steps describe the procedure to use the ARRAY command to
produce rectangular patterns.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 1: Select "Rectangular Array". This will array the object in a row/column
pattern.
Step 2: Next select the object you want to array, by pressing the button in the top
right corner. Select the objects and then press Enter when finished.
Step 3: Enter the
number of rows and
Column Offset
column.
Step 4: Enter the
Row offset. In the
figure
shown
for
example, the row
Row Offset
offset is 20.
AutoCAD 2D II
- 75 -
Module 24: Arraying
Institute of Applied Technology
Step 5: Enter the Column offset. In the above figure, the Column offset is 15.
Step 6: Enter the Angle of array. The default value is 0.
Step 7: Press the Preview button to see the result before accepting.
Step 8: If you are happy with the result press Accept, if not press Modify to make
the necessary changes.
Polar Array
The following steps describe the procedure to use the ARRAY command to
produce circular patterns.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 1: Select "Polar Array". This will array the object in a circular pattern.
Step 2: Next select the object you want to array, by pressing the button in the top
right corner. Select the objects and then press Enter when finished.
AutoCAD 2D II
- 76 -
Module 24: Arraying
Institute of Applied Technology
Step 3: Enter the center point of the circular pattern.
Step 4: Select the method you want to use to array. You have three different
methods to select form.
Step 5: Enter the total number of items.
Step 6: Enter the angle to fill.
Step 7: Press the Preview button to see the result before accepting. If you are
happy with the result press Accept, If not press Modify to make the necessary
changes.
Exercise 1: Draw the following object. Utilize the array command.
AutoCAD 2D II
- 77 -
Module 24: Arraying
Institute of Applied Technology
In this exercise, after drawing the circle and the rectangle, enter the required data
as shown below.
Select this
object.
Select the
center of the
circle.
Tick this
box.
Exercise 2: Draw the following object. Utilize the array command.
AutoCAD 2D II
- 78 -
Module 24: Arraying
Institute of Applied Technology
In this exercise, after drawing the circle and the rectangle, enter the required data
as shown below.
Select this
object.
Select the
center of the
circle.
Press More
and set the
Object
base point.
Untick the
box if it is
ticked.
Select the Midpoint of the diagonal.
Note:
In the Array command, if you are not rotating items as they copied you should
in most cases select the center of the object to be arrayed as the object
base point.
AutoCAD 2D II
- 79 -
Module 24: Arraying
Institute of Applied Technology
Task1 Details
Drawing Specifications
Name
Template
Units
Text Style
Font
AutoCAD 2D Exe- 24-1
IAT Module Template A3
Millimeters
N/A
N/A
Color
Linetype
Lineweight
Green
Continuous
N/A
Layering Scheme
Objects on Layer
Name
Construction Objects
Construction
All Objects
Object
Black/White
Continuous
N/A
Centerlines
Center
Blue
Center
N/A
Instructions:
1. Open the template IAT Module Template A3.
2. Setup the layers as per the layering scheme.
3. Draw the chair shown below. Your starting point is 175,150.
l
Start Point
175,150
AutoCAD 2D II
- 80 -
Module 24: Arraying
Institute of Applied Technology
4. Use the Array command to arrange the chairs as shown below. The row and
column offset is 25.
AutoCAD 2D II
- 81 -
Module 24: Arraying
Institute of Applied Technology
Task2 Details
Drawing Specifications
Name
Template
Units
Text Style
Font
AutoCAD 2D Exe- 24-2
IAT Module Template A3
Millimeters
N/A
N/A
Color
Linetype
Lineweight
Green
Continuous
N/A
Layering Scheme
Objects on Layer
Name
Construction Objects
Construction
All Objects
Object
Black/White
Continuous
N/A
Centerlines
Center
Blue
Center
N/A
Instructions:
1. Open the template IAT Module Template A3.
2. Setup the layers as per the layering scheme.
3. Draw the object shown below. Your starting point is 190,160.
Start Point
190,160
AutoCAD 2D II
- 82 -
Module 24: Arraying
Institute of Applied Technology
Module 24 Review Questions
1. You can use the Array command to produce copies of an object in
rectangular and _______ patterns.
a. square
b. circular
c. triangular
d. hexagonal
2. The number of rows in the following pattern is ______.
a. 4
b. 5
c. 6
d. 2
3. The alias used to start the Array command is _______.
a. AR
b. ARR
c. ARRAY
d. RAY
4. Which of the following represents the Array command icon?
a.
b.
c.
d.
5. What is the column offset in the object shown?
a. 5
b. 10
c. 15
d. 20
AutoCAD 2D II
- 83 -
Module 24: Arraying
Institute of Applied Technology
6. By default, if the row offset is ________ the rows are added downward.
a. positive
b. negative
c. negative or positive
d. big
7. By default, if the column offset is ________ the columns are added to the
left.
a. positive
b. negative
c. negative or positive
d. big
8. In the object shown the total number of items and angle to fill are ____
and _____ , respectively.
a. 8, 180
b. 8, 360
c. 8, 90
d. 7, 180
9. In the object shown the items were _______ as copied.
a. rotated
b. not rotated
c. deleted
d. refreshed
10. In the Array command, if you are not rotating items as they copied you
should in most cases select the ________ of the object to be arrayed as
the object base point.
a. end
b. center
c. bottom
d. top
AutoCAD 2D II
- 84 -
Module 24: Arraying
