May/June 2010(1)

EEE
1. (a) A square lamina of 40 mm side is perpendicular to H.P One of its sides is 20
mm above
H.P and 15 mm in front of V.P. Draw its projections.
(b) A square lamina of 40 mm is perpendicular to both planes. Draw projections
with lamina 25
mm above H.P and 40 mm in front of V.P.
(c) An equilateral triangle lamina of side 60 mm is perpendicular to H.P and
inclined to V.P at
an angle of 300.Draw its projections.
May/June 2010(2)
EEE
2. (a) A circular lamina of 42 mm diameter has its surface parallel to HP and
perpendicular to VP.
Its center is 15 mm above HP and 30 mm in front of VP. Draw its projections.
(b) An equilateral triangular lamina of side 50 mm is perpendicular to both planes.
Draw its
projections.
May/June 2010(3)
EEE
3. (a) A rectangular lamina of sides 40 mm X 30 mm is perpendicular to both HP and
VP. Draw its
projections
(b) Draw the projections of a pentagonal plane figure of side 28 mm resting with
one of its
edges on HP, such that the plane figure is inclined at 30 0 to HP and
perpendicular to VP.
May/June 2010(4)
EEE
4. (a) Draw the projections of a pentagonal plane figure of side 28 mm resting with
one of its
edges on HP, such that the plane figure is inclined at 30 0 to VP perpendicular to
HP.
(b) A thin square plate ABCD of side 40 mm is perpendicular to both HP and VP
.Draw its
projections.
May/June 2010(1)
ECE
5. (a) An equilateral triangular lamina of side 30 mm is perpendicular to H.P and
parallel to V.P.
One of its edges is 15mm above H.P and 25 mm in front of V.P. Draw its
projections.
(b) A rectangular plate of negligible thickness and having 40X60 mm dimensions is
perpendicular to both planes. It's longer side is perpendicular to V.P and is in H.P
and 20
mm in front of V.P. Draw its projections.
May/June 2010(2)

ECE
6. (a) A rectangular lamina of sides 30 mm X 40 mm is perpendicular to HP and
inclined at 300 to
VP. Draw its projections.
(b) A square lamina ABCD of side 40 mm is perpendicular to HP and parallel to VP.
Draw its
projections.
May/June 2010(3)
ECE
7. (a) A circular plate of 50 mm diameter is perpendicular to both planes. Its center is
60 mm
above H.P and 50 mm in front of V.P. Draw its projections.
(b) A rectangular cardboard ABCD of edges AB=30 mm and BC=40 mm is placed
such that
the edge AB is
i) perpendicular to HP and parallel to VP. ii) perpendicular to VP and parallel to
HP.

May/June 2010(4)
ECE
8. (a) A square lamina ABCD of 50 mm side is perpendicular to V.P and parallel to
H.P.It is 20
mm above H.P and 30 mm in front of V.P. Draw its projections.
(b) A square lamina of 40 mm side has a corner on H.P. and 20 mm in front of V.P.
All sides
are equally inclined to H.P and parallel to V.P. Draw its projections.
May/June 2010(1)
CSE
9. (a) A circular plate is parallel to H.P Its radius is 30 mm and center is 50 mm above
and 20 mm
in front of V.P. Draw its projections of planes.
(b) A regular pentagon of 25 mm side has one of its edge on V.P. Its plane is
inclined at 450 to
V.P. Draw its projections.
May/June 2010(2)
CSE
10. (a) A pentagonal plate of 35 mm side is perpendicular to V.P and parallel to H.P
One of its
edges is perpendicular to V.P. Draw its projections.
(b) A square lamina of side 40 mm is perpendicular to VP and parallel to HP. Draw
its
projections.
May/June 2010(3)
CSE
11. (a) A square lamina of 50 mm side is inclined at 450 to V.P and parallel to H.P
Draw it
projections.

(b) An equilateral triangle lamina of side 30 mm parallel to H.P. and to V.P. One of
its side is
20 mm in front of V.P. and 30 mm above H.P. Draw its projections.
May/June 2010(4)
CSE
12. (a) A regular pentagon of 25 mm side has one side on the ground. Its plane is
inclined to H.P
at 450 and perpendicular to V.P Draw its projections
(b) Draw the projections of circle diameter of 5 cm having its plane vertical and
inclined at 300
to the V.P Its center is 3 cm above H.P and 2 cm in front of V.P.

May/June 2010(R7)
Civil Engineering
13. Draw the projections of a cylinder, base 30 mm diameter and axis 40 mm
long, rests
with a point of its base circle on H.P. such that the axis is making an angle
of 300
with H.P. and its top view perpendicular to V.P.
May/June 2011(1)
EEE
14. (a) A square lamina of 50 mm side is inclined at 45 0 to V.P and parallel to
H.P Draw
it projections.
(b) An equilateral triangle lamina of side 30 mm parallel to H.P. and to V.P.
One of its
side is 20 mm in front of V.P. and 30 mm above H.P. Draw its
projections.

May/June 2011(2)
EEE
15. (a) A regular pentagon of 25 mm side has one side on the ground. Its
plane is
inclined to H.P at 450 and perpendicular to V.P Draw its projections
(b) Draw the projections of circle diameter of 5 cm having its plane
vertical and
inclined at 300 to the V.P Its center is 3 cm above H.P and 2 cm in
front of V.P.
May/June 2011(3)
EEE
16. (a) A regular hexagonal lamina of 30 mm side rests on H.P with its plane
surface
vertical and inclined at 450 to V.P Draw its projections of the plane

(b) A square plate of side 30 mm is perpendicular to V.P and inclined at

May/June 2011(1)
ECE
18. (a) An equilateral triangular lamina of 30 mm side with the surface
inclined at
600 to H.P.lines with One of its sides on H.P. The edge on which it
rests is
inclined to V.P.at 600 to V.P. and its surface making an angle of 450
withH.P.
(b) A rectangular plane of 60mmX40mm is resting on shorter edge
on the
ground and inclined at 450 to V.P. The plane surface is inclined at
300 to
H.P. Draw its projections.
May/June 2011(2)
ECE
19. (a) A rectangular lamina of sides 40X60 rests on H.P on one of its
longer
sides the lamina is tilted about an edge on which it rests till the
plane is
inclined to H.P. at 450. The edge on which it rests is
perpendicular to V.P.
Draw its projections
(b) Draw the projections of regular hexagon of 25 mm side having
one of its
edge in H.P and inclined at 600 to V.P and its surface making an
angle of
600 to H.P.

May/June 2011(3)
ECE
20. (a) A square ABCD of 50 mm side has its corners A in H.P its
diagonal AC is
inclined at 300 to H.P and the diagonal BD is inclined at 450 to
V.P and
parallel to H.P .Draw its projections.
(b) A thin 300-600 set square has its longest edge in V.P and inclined
at 300 to
H.P. Its surface makes an angle of 450 with V.P. Draw its
projections.
May/June 2011(4)
ECE
21. Draw the projections regular pentagon of 40 mm side, having its
surface
inclined 300 to HP and a side parallel to the HP. And inclined at
angle of 600
to VP.
May/June 2011(1)
CSE
22. (a) Draw the projections of a circle of 50 mm diameter resting in
the H.P. on a
point A on the circumference, its plane inclined at 450 to the H.P.
and the
top view of the diameter AB making 300 an angle with the V.P.
(b) A thin rectangular plate of sides 6omm X 30mm has its shorter
side in the
V.P. and inclined at 300 to the H.P. Project its top view if its front
view is a
square of 30 mm long sides
May/June 2011(2)
CSE
23. (a) An equilateral triangular plane ABC of side 40 has its plane parallel to
V.P. and
20 away from it. Draw its projections of the planes. (i) Perpendicular to
H.P. (ii)
parallel to H.P. and (iii) inclined to H.P at an angle of 45 0.

(b) Draw the equilateral triangle of 75 mm side and inscribe a circle in it.
Draw the
projections of figure , when its plane is vertical and inclined at 30 0 to
VP and one
of the sides of the triangle is inclined at 45 0 to HP

May/June 2011(3)
CSE
24. (a) A square ABCD of 50mm side has its corner A in the H.P., its
diagonal AC
inclined at 300 to the H.P. and the diagonal BD inclined at 450 to
the H.P.
Draw its projections.
(b) Draw the projections of a circle of 5 cm diameter, having its
plane vertical
and inclined at 300 to V.P. Its center is 3 cm above the H.P. and 2
cm in
front of the V.P.

May/June 2011(4)
CSE
25. The top view of a plate, the surface of which is perpendicular to the
V.P. and
inclined at 600 to the H.P. is a circle of 60 mm diameter. Draw its
top view
May 2012(1)
CSE
26. (a) A square lamina ABCD of 50 mm side is perpendicular to V.P and parallel to H.P.
It is 20 mm above H.P and 30 mm in front of V.P. Draw its projections
(b) A square lamina of 40 mm side has a corner on H.P. and 20 mm In front of V.P.
All sides are equally inclines to H.P and parallel to V.P.
May 2012(2)
CSE
27. (a) A circular plate is parallel to H.P Its radius is 30 mm and center is 50 mm above
and 20 mm in front of V.P. Draw its projections of planes.
(b) A regular pentagon of 25 mm side has one of its edges on V.P its plane is inclined
at 450 to V.P. Draw its projections.
May 2012(3)
CSE

28. (a) A square lamina of 50 mm side is inclined at 450 to V.P and parallel to H.P Draw
it projections.
(b) An equilateral triangle lamina of side 30 mm parallel to H.P. and to V.P .One of its
side is 20 mm in front of V.P. and 30 mm above H.P .Draw its projections.
May 2012(4)
CSE
29. (a) A square ABCD of 50 mm side has its corners A in H.P its diagonal AC is
inclined at 300 to H.P and the diagonal BD is inclined at 450 to V.P and parallel to
H.P .Draw its projections.
(b) A thin 300-600 set square has its longest edge in V.P and inclined at 300to H.P. Its
surface makes an angle of 450 with V.P. Draw its projections.
May/June 2011(1)
ECE
30. (a) An equilateral triangular lamina of 30 mm side with the surface
inclined at
600 to H.P.lines with One of its sides on H.P.The edge on which it
rests is
inclined to V.P. at 600 to V.P. and its surface making an angle of 450
with H.P.
(b) A rectangular plane of 60mmX40mm is resting on shorter edge
on the
ground and inclined at 450 to V.P. The plane surface is inclined at
300 to
H.P. Draw its projections.

May/June 2011(2)
ECE
31. (a) A rectangular lamina of sides 40X60 rests on H.P on one of its
longer
sides the lamina is tilted about an edge on which it rests till the
plane is
inclined to H.P. at 450. The edge on which it rests is
perpendicular to V.P.
Draw its projections
(b) Draw the projections of regular hexagon of 25 mm side having
one of its
edge in H.P and inclined at 600 to V.P and its surface making an
angle of
600 to H.P.
May/June 2011(3)
ECE

32. (a) A square ABCD of 50 mm side has its corners A in H.P its
diagonal AC is
inclined at 300 to H.P and the diagonal BD is inclined at 450 to
V.P and
parallel to H.P .Draw its projections.
(b) A thin 300-600 set square has its longest edge in V.P and inclined
at 300 to
H.P. Its surface makes an angle of 450 with V.P. Draw its
projections.
May/June 2011(4)
ECE
33. Draw the projections regular pentagon of 40 mm side, having its
surface
inclined 300 to HP and a side parallel to the HP. And inclined at
angle of 600
to VP.
May 2012(1)
EIE
34. An equilateral triangle of 50 side, has its plane parallel to H.P and 30 away from it.
Draw the projections when one of its sides is (i) perpendicular to V.P (ii) parallel to VP
(iii) inclined to VP at angle of 450.
May 2012(2)
EIE
35. Draw the projections of regular pentagon of 25 mm side having its surface inclined at
300 to H.P and side parallel to H.P. and inclined at an angle of 600 to V.P.
May 2012(3)
EIE
36. (a) A rectangular lamina of sides 30 mm X 40 mm is perpendicular to HP and
inclined at 300 to VP. Draw its projections.
(b) A square lamina ABCD of side 40 mm is perpendicular to HP and parallel to VP.
Draw its projections.

May 2012(4)
EIE
37. (a) A pentagonal plate of 35 mm side is perpendicular to V.P and parallel to H.P One
of its edges is perpendicular to V.P. Draw its projections.

(b) A square lamina of side 40 mm is perpendicular to VP and parallels to HP. Draw its
projections.
November/December 2011(R7)
EEE
38. A line AB, 80 mm long, makes an angle of 30 with VP and lies in a plane
perpendicular to both the HP and V.P. Its end A is in the H.P and the end B is in the V.P.
Draw the projections of the line.

December 2010.(R09)
EEE
39. (a) A circular plate is parallel to H.P Its radius is 30 mm and center
is 50 mm above and 20 mm in front of V.P. Draw its projections of
planes.
(b) A regular pentagon of 25 mm side has one of its edge on V.P its
plane is inclined at 450 to V.P. Draw its projections..
December 2010.(R09)
ECE
40. (a) A square lamina ABCD of 50 mm side is perpendicular to V.P
and parallel to H.P.It is 20 mm above H.P and 30 mm in front of V.P.
Draw its projections
(b) A square lamina of 40 mm side has a corner on H.P. and 20 mm In
front of V.P. All sides are equally inclines to H.P and parallel to V.P.
December 2010.(R09)
CSE
41. A rectangular plane of size 60x30 has its shorter side on H.P and
inclined at 300 to V.P. Draw the projections of the plane. If its surface is
inclined at 450to the H.P.
December 2010.(R7)
CSE
42. Draw the projections of a cylinder, base 30 mm diameter and axis of 40 mm
long, rests with a point of its base
circle on H.P. such that the axis is making an angle of 300 with H.P. and its top view
perpendicular to V.P.

November/December 2011(R09)
EEE

43. (a) A square plane ABCD of side 30 is parallel to H.P.and 20 away from it.
Draw its
projections of the plane. i)parallel to V.P. ii) inclined at 30 0 to V.P.
(b) A regular pentagon of 30 mm side, has one of its corner on VP and Its
surface is
inclined at 600 to VP .The edge, opposite to corner on VP, makes an angle of
450 with
HP .draw the projections of the plane.
November/December 2011(R09)
ECE
44. (a) A square lamina of 40 mm side is perpendicular to H.P One of its sides
is 20 mm
above H.P and 15 mm in front of V.P. Draw its projections.
(b) A square lamina of 40 mm is perpendicular to both planes. Draw
projections with
lamina is 25 mm above H.P and 40 mm in front of V.P.
November/December 2011(R09)
CSE
45. (a) An equilateral triangular lamina of side 30 mm is perpendicular to H.P
and parallel to V.P One of its edges 15mm above H.P and 25 mm in front of
V.P Draw its projections
(b) A rectangular plate of negligible thickness and having 40X60 mm
dimensions is
perpendicular to both planes .It is longer side is perpendicular to V.P and in
H.P and 20
mm in front of V.P Draw its projections.
November/December 2011(R7)
EEE
46. A line AB, 80 mm long, makes an angle of 30 with VP and lies in a plane
perpendicular to both the HP and V.P. Its end A is in the H.P and the end B is in the V.P.
Draw the projections of the line.