580N

ENGINE
Model

Case F5C,
Tier 4 Interim Emissions Certified

Type

Diesel 4-stroke, turbocharged

Cylinders
Bore/Stroke

4
3.90 x 4.33 in
(99 x 110 mm)

Displacement

207 in3 (3.4 L)

Fuel injection

Direct, high pressure

common rail HPCR

Fuel

Diesel

Fuel filter

w/ water trap

Air intake

Cross-flow

Cooling
Engine speeds*
Rated speed full load
Low idle
High idle no load
Horsepower @ 2200 RPM:
Gross
Net w/ viscous fan**
Net

Liquid
RPM
2200
875 1025
2300 2450
85 hp (63 kW)
83 hp (62 kW)
78 hp (59 kW)

Maximum torque @ 1400 RPM:

Gross
276 lbft (374 Nm)
Net w/ viscous fan
274 lbft (372 Nm)
Net
268 lbft (364 Nm)
Torque rise at rated speed

36%

Radiator:
Core type
Core size area
Rows of tubes

Square wave
486 in2 (3145 cm2)
4

39 degree fan:
Style
Diameter
Ratio

7 blade suction
19.65 in (499 mm)
1.1:1

Water pump style

Integral

Engine oil pump:

Deep sump plate cooler w/ pressurized
under-piston nozzles
Pump operating angle ratings:
Side to side
Rated 35
Fore and aft
Rated 35
Oil filtration
Replaceable,

full flow spin on
NOTE: *Meets federal emission regulations.
**Viscous fan included w/ Cab
Convenience package.

LOADER / BACKHOE
TIER 4 INTERIM CERTIFIED

POWERTRAIN

OPERATOR ENVIRONMENT

Transmission standard:
4F-4R Power Shuttle Synchromesh
Transmission manual gear shift, fully
synchronized

ROPS / FOPS certified protective canopy;

Anti-vandalism cover for dash w/ canopy only;
Rear fenders extensions; Coat hook w/ garment
strap; Interior rearview mirror, convex
3.54 in (90 mm) wide x 10.83 in (275 mm) high;
Non-suspension seat 180 swivel Vinyl; 2
in (50 mm) retractable seat belt; Cup holder/
storage tray mounted on left-hand fender;
Right-hand storage compartment w/ lid.

Transmission optional:
Powershift S-Type, 4F-3R fully synchronized
Specifications below apply to both Power
Shuttle and Powershift S-Type transmission
unless otherwise indicated.
Gear ratios
1st
2nd
3rd
4th

Forward / Reverse
5.603 / 4.643
3.481 / 2.884
1.584 / 1.313
0.793 / 0.657*

Travel speeds

Forward
mph (kph)

Reverse
mph (kph)

3.8 (6.1)
6.1 (9.8)
12.9 (20.8)
24.3 (39.1)

4.5 (7.3)
7.3 (11.7)
15.5 (24.9)
29.1 (46.9)*

1st
2nd
3rd
4th

NOTE: Travel speeds at 2293 engine RPM

w/ 19.5 L x 24.0 tires. Speeds decrease

w/ 17.5 L x 24.0 rear tires.

*4R not available on Powershift S-Type.

Torque converter ratio

On-the-go
push-button activation

Front 4WD / Rear axle:

Differential ratio
Planetary hub ratio
Total reduction ratio

2.0 / 2.5
6.0 / 6.4
12.0 / 16.0

Service brakes:
Individually applied, power assisted,
hydraulically actuated, maintenance-free,
self-adjusting, outboard mounted, wet disc,
2 per side.
Disc area

384 in2 (0.25 m2)

Parking brakes

Trans Mounted
spring-applied
hydraulic release SAHR

ELECTRICAL
Voltage

Warning lights:
Air cleaner restriction; Alternator; A/C high
pressure; Cold start; Engine oil pressure low;
Hydraulic oil filter bypass; Parking brake
engagement; Low fuel.
Audible alarms:
Coolant temperature; Engine oil pressure;
Parking brake engagement; Shuttle
engagement / seat position; Backup.
Horn

3.2

Differential lock

Gauges:
Engine water temperature; Converter oil
temperature; Fuel level; Tachometer/
hourmeter; Voltmeter.

dual switched front and rear

OPERATING WEIGHT
Configuration 1 SAE Transport:
82 in (2.08 m) LL bucket, 2WD, 17.5 L x 24.0
rear tires, standard dipper, 24 in (610 mm)
Trenching bucket, standard cast stabilizer pads,
ROPS canopy, vinyl-suspension seat, dual
battery, no operator, fully fueled:



14,564 lb (6607 kg)
Configuration 2 SAE Transport:
82 in (2.08 m) bucket, 4WD,
19.5 L x 24.0 rear tires, Extendahoe,
24 in (0.61 m) HD bucket, flip stabilizer pads,
1,100 lb (500 kg) counterweight, ROPS cab,
cloth, air-suspension seat, dual battery, no
operator, mechanical backhoe quick coupler
and 40 gal (151 L) plastic fuel tank:



17,454 lb (7917 kg)
Add-on weights:

12 Volts, negative ground

Alternator

120 amp

Cab over canopy

Fabricated stabilizer pads

0 lb (0 kg)
141 lb (64 kg)

Battery

850 cold-cranking amps

Counterweights

700 lb (318 kg)

Opt. batteries (2)

850 cold-cranking amps

Extendahoe

285 lb (129 kg)

4WD w/ driveshaft guard

283 lb (128 kg)

Power plugs (2)

30 amps total

Buckets:
82 in (2.08
82 in (2.08
93 in (2.36
24 in (0.61

Page 1 of 7

m)
m)
m)
m)

4 IN 1
1,451 lb (658.0
Long Lip
683 lb (310.0
Long Lip
1,188 lb (539.0
Heavy-Duty Universal:
427 lb (193.5

kg)
kg)
kg)

kg)

HYDRAULICS

SERVICE CAPACITY

OTHER SPECIFICATIONS

Pump:
Parker P330 Single Section Gear Pump

Fuel tank

42.0 gal (159 L)

Turning diameter*:

Hydraulic system:
Total
w/ Extendahoe
Reservoir w/ filter
Reservoir w/o filter

112 qt (106.0
118 qt (111.7
58 qt (55.0
56 qt (53.0

Standard main relief pressure:

3,350 +/- 50 psi @ 28.5 gpm

(231 +/- 3.5 bar @ 108 L / min)
Filtration:
7 micron, return line, full flow, spin on
element, condition indicator light for filter.
Oil cooler

Heavy-duty

Loader flow @ rated engine RPM:

28.5 gpm @ 3,000 psi

(108 L / min @ 207 bar)
Loader control valve:
Two- or three-spool open center monoblock
valve. Two- and three-spool valves have
a single lever manual control for lift and
tilt functions. Three-spool valve uses a
proportional Electro-Hydraulic control for
the auxiliary function. The lift lever has
a positive hold Float position and a
return-to-dig feature. System Main Relief
valve is single stage w/ Manual Backhoe
Controls, dual stage relief valve
w/ Pilot Backhoe Controls.
Loader auxiliary hydraulics proportional thumb
switch w/ detent on loader control handle.
Loader auxiliary hydraulics w/ full
available flow:


0 28.5 gpm (0 108 L /min)
Backhoe flow @ rated engine RPM:

28.5 gpm @ 3,000 psi

(108 L / min @ 207 bar)
Manual backhoe control valve:
Six- or seven-spool monoblock open
center control valve. Features Pro-Control
which includes custom designed spools for
each individual function along w/ swing
cushioning valve for zero-wag swing control.
Basic control valve has an open center
parallel circuit for all functions.
Pilot backhoe control valve:
Six-, seven- or eight-spool sectional closed
center control valve. Features Pro-Control
which includes custom designed spools for
each individual function along w/ swing
cushioning valve for zero-wag swing control.
Basic control valve is closed center,
w/ circuits in parallel w/ a post-compensated,
flow sharing feature for simultaneous
operation of all circuits.
Unidirectional Auxiliary Hydraulics:
Unidirectional hydraulic valve is equipped
w/ an adjustable LS relief valve to control
attachment pressure and a 6 position flow
control selector for 6 detented, distinct
flow settings.

L)
L)
L)
L)

Transmission total system:

2WD Standard
2WD Powershift
4WD Standard
4WD Powershift

18
23
21
22

4WD Front axle:

Differential
Planetaries each

8.1 qt (7.7 L)
0.5 qt (0.5 L)

qt
qt
qt
qt

(17.0
(21.7
(19.4
(20.7

L)
L)
L)
L)

2WD:
Brakes on
Brakes off

(cont.)

10 ft 8 in (3.24 m)
12 ft 4 in (3.79 m)

4WD engaged:
Brakes on
Brakes off

11 ft 4 in (3.45 m)
13 ft 10 in (4.21 m)

4WD disengaged:
Brakes on
Brakes off

11 ft 0 in (3.36 m)
12 ft 3 in (3.72 m)

Rear axle:
Differential and planetaries

14.4 qt (13.6 L)

Backhoe:
Over center design, fabricated S boom;
Open-center hydraulics pro control system;
15,700 lbft (21 297 Nm) swing torque;
198 bucket rotation; Foot-swing w/ 3-lever
control; Wing stabilizers w/ cleated dirt pad.

Engine oil w/ filter

14.4 qt (13.6 L)

Backhoe bucket sizes:

Cooling system:
w/ heater
w/o heater

17.8 qt (16.8 L)
17.0 qt (16.1 L)

Width

Weight

Heaped

General Purpose Trenching Buckets

18 in
(457 mm)

231.5 lb
(105.0 kg)

4.70 ft3
(0.13 m3)

OTHER SPECIFICATIONS

24 in
(610 mm)

272.0 lb
(123.4 kg)

6.26 ft3
(0.18 m3)

Front tires:
2WD
4WD

11.0 L x 16.0, 10-ply rating

12.0 L x 16.5, 8-ply rating

12 in
(305 mm)

294.5 lb
(133.6 kg)

3.40 ft3
(0.10 m3)

Rear tires:
2 / 4WD
2 / 4WD
2 / 4WD

19.5 L x 24.0, 10-ply rating

17.5 L x 24.0, 10-ply rating
16.9 L x 28.0, 10-ply rating

18 in
(457 mm)

356.3 lb
(161.6 kg)

5.30 ft3
(0.15 m3)

24 in
(610 mm)

426.6 lb
(193.5 kg)

7.70 ft3
(0.22 m3)

30 in
(762 mm)

489.4 lb
(222.0 kg)

10.20 ft3
(0.29 m3)

36 in
(914 mm)

552.3 lb
(250.5 kg)

12.70 ft3
(0.36 m3)

Window washer reservoir

3.0 qt (2.8 L)

Universal Buckets

Loader:
Bucket position indicator; Lifting lugs on
standard bucket; Single lever control w/ selfleveling and return-to-dig; Hand operated
clutch disconnects on loader and shift levers,
single lever 4-function loader control: lift,
dump, clutch cut-out, differential lock.
Loader bucket sizes:
Width

Weight

Struck

Heaped

Long Lip Bucket w/o bolt-on edge

82 in
(2.08 m)

683 lb
(310 kg)

0.87 yd3
(0.67 m3)

1.03 yd3
(0.79 m3)

93 in
( 2.36 m)

1,188 lb*
(539 kg)

1.07 yd3
(0.82 m3)

1.25 yd3
(0.96 m3)

4 IN 1 Bucket w/ bolt-on edge

82 in
(2.08 m)

1,451 lb*
(658 kg)

0.85 yd3
(0.65 m3)

1.04 yd3
(0.80 m3)

NOTE: *Weight of 4 IN 1 bucket includes edges,

cylinders and tube lines.

Actuation:
Manual backhoe controls cab floor pedal
Pilot controls left-hand joystick

580N Page 2 of 7

High Capacity Buckets

24 in
(610 mm)

446.7 lb
(202.6 kg)

8.50 ft3
(0.24 m3)

NOTE: *Turning diameter dimensions curb to curb

w/ 17.5 L x 24.0 rear tires and 4 IN 1 bucket.

D
F

A
B

N
E
H

C
G

O
M

Line drawings are for illustrative purpose only and may not be exact representation of unit.

LOADER DIMENSIONS*

Long Lip Bucket

4 IN 1 Bucket

A.

13 ft 9 in (4.18 m)

13 ft 8 in (4.16 m)

11 ft 3 in (3.42 m)

11 ft 3 in (3.42 m)

13.6 in (345 mm)

13.6 in (345 mm)

47

47

8 ft 10 in (2.69 m)

8 ft 11 in (2.71 m)

9 ft 8 in (2.96 m)

31.5 in (801 mm)

29.1 in (738 mm)

15.3 in (388 mm)

G. @ Groundline

42

42

H. @ SAE carry

42

42

Adjustable

Adjustable

6.1 in (155 mm)

4.8 in (122 mm)

Overall operating height fully raised

Height to:
B. Bucket hinge pin fully raised
C. Bucket hinge pin at SAE carry
D. Dump angle at full height
E.

Dump clearance at full height, 45 dump:

Bucket

Clam open

F.

Dump reach at full height, 45 dump:

Bucket

Clam open

Bucket rollback:

J.

@ Full height

K. Digging depth below grade:

Bucket flat

Clam open dozing

L.

Reach from front axle centerline bucket on ground

Lift capacity to full height

4.1 in (103 mm)

6 ft 1 in (2.08 m)

6 ft 1 in (2.03 m)

6,803 lb (3086 kg)

6,454 lb (2930 kg)

Breakout force:

Lift cylinders

Dump cylinders

Bucket cutting edge width

9,506 lb (4228 daN)

9,276 lb (4126 daN)

10,622 lb (4724 daN)

11,312 lb (5032 daN)

82.5 in (2.09 m)

82.0 in (2.08 m)

Maximum grading angle

114

114

Maximum clam opening

38.3 in (972 mm)

Moldboard height

36.8 in (934 mm)

Raising time to full height

4.6 sec

4.6 sec

Bucket dumping time

1.1 sec

1.1 sec

Lowering time:

Power down

2.6 sec

2.6 sec

Return-to-dig

3.6 sec

3.6 sec

Clam:

Open time

1.0 sec

Close time

1.0 sec

NOTE: *Loader dimensions taken with 4WD, 19.5 L x 24.0 rear tires.

580N Page 3 of 7

DIMENSIONS

2WD with 19.5 L x 24.0 tires

4WD with 19.5 L x 24.0 tires

M. Overall transport length:

Long Lip bucket with Quick Coupler

23 ft 5 in (7.14 m)

23 ft 4 in (7.10 m)

4 IN 1 bucket with Quick Coupler

23 ft 3 in (7.07 m)

23 ft 1 in (7.04 m)

Long Lip bucket with Straight Links

23 ft 6 in (7.15 m)

23 ft 4 in (7.12 m)

4 IN 1 bucket with Straight Links

23 ft 3 in (7.09 m)

23 ft 2 in (7.06 m)

6 ft 10 in (2.07 m)

6 ft 10 in (2.07 m)

8 ft 9 in (2.66 m)

8 ft 9 in (2.66 m)

8 ft 11 in (2.72 m)

8 ft 11 in (2.72 m)

Overall transport width rear tires

Height:

To top of canopy

To top of cab

To top of exhaust stack

N. Transport
Ground clearance at backhoe frame

8 ft 7 in (2.62 m)

8 ft 7 in (2.61 m)

10 ft 10 in (3.30 m)

11 ft 1 in (3.37 m)

15.0 in (380 mm)

15.0 in (380 mm)

15.3

19.0

Angle of departure
Front wheel tread:

11.0 L x 16.0

67.5 in (1.71 m)

67.5 in (1.71 m)

12.0 L x 16.5

67.7 in (1.72 m)

67.7 in (1.72 m)

Rear wheel tread:

17.5 L x 24.0

63.1 in (1.60 m)

63.1 in (1.60 m)

19.5 L x 24.0

61.2 in (1.55 m)

61.2 in (1.55 m)

Width over tires:

11.0 L x 16.0

79.3 in (2.01 m)

79.3 in (2.01 m)

12.0 L x 16.5

81.1 in (2.06 m)

81.1 in (2.06 m)

17.5 L x 24.0

81.7 in (2.07 m)

81.7 in (2.07 m)

19.5 L x 24.0

81.4 in (2.07 m)

81.4 in (2.07 m)

84.0 in (2.13 m)

84.5 in (2.15 m)

O. Wheelbase

CYLINDERS

Bore Diameter

Rod Diameter

Stroke

Closed Length

Loader:

Lift (2)

3.25 in (82.6 mm)

1.75 in (44.5 mm)

28.86 in (733.0 mm)

41.81 in (1062.0 mm)

Dump (2)

3.00 in (76.2 mm)

1.50 in (38.1 mm)

20.33 in (516.5 mm)

30.31 in ( 769.9 mm)

4 IN 1 clam (2)

3.00 in (76.2 mm)

1.75 in (44.5 mm)

9.08 in (230.6 mm)

19.62 in (498.3 mm)

Backhoe:

Boom

4.50 in (114.3 mm)

2.25 in (57.2 mm)

38.22 in (971.5 mm)

52.82 in (1341.6 mm)

Dipperstick

4.25 in (108.0 mm)

2.25 in (57.2 mm)

25.14 in (628.5 mm)

39.65 in (1007.0 mm)

Bucket

3.25 in (82.6 mm)

2.25 in (57.2 mm)

35.35 in (897.9 mm)

48.17 in (1223.6 mm)

Extendahoe

3.00 in (76.2 mm)

1.75 in (44.5 mm)

42.05 in (1068.0 mm)

56.22 in (1428.0 mm)

Swing (2)

3.75 in (95.3 mm)

2.00 in (50.8 mm)

11.50 in (292.0 mm)

24.44 in (620.8 mm)

Stabilizer (2)

4.25 in (108.0 mm)

2.25 in (57.2 mm)

21.37 in (542.9 mm)

33.87 in (860.2 mm)

AXLE RATINGS

Front 2WD

Rear

Front 4WD

Maximum static

70,821 lb (32 124 kg)

90,145 lb (40 889 kg)

64,613 lb (29 308 kg)

Dynamic operating

44,261 lb (20 076 kg)

56,200 lb (25 492 kg)

39,328 lb (17 839 kg)

17,704 lb (8030 kg)

22,480 lb (10 197 kg)

15,732 lb (7136 kg)

22 total 11% side to side

22 total 11% side to side

Static operating
Oscillation front axle

580N Page 4 of 7

BACKHOE LIFT CAPACITIES

Standard Backhoe
Boom Lift

Lift Capacity
lb (kg)

Extendahoe
Retracted

Extended

Lift Capacity
lb (kg)

Lift Capacity
lb (kg)

+16 ft (4.87 m)

1,693 (768)

+14 ft (4.27 m)

2,472 (1121)

2,271 (1030)

1,979 (897)

+12 ft (3.66 m)

2,857 (1296)

2,644 (1199)

2,124 (964)

+10 ft (3.05 m)

2,966 (1345)

2,748 (1246)

2,172 (985)

+8 ft (2.44 m)

2,983 (1353)

2,761 (1252)

2,169 (984)

+6 ft (1.83 m)

2,963 (1344)

2,739 (1242)

2,173 (985)

+4 ft (1.22 m)

2,929 (1329)

2,701 (1225)

2,165 (982)

+2 ft (0.61 m)

2,892 (1312)

2,662 (1207)

2,153 (977)

Ground Level

2,858 (1297)

2,625 (1191)

2,153 (977)

-2 ft (0.61 m)

2,834 (1285)

2,598 (1178)

2,145 (973)

-4 ft (1.22 m)

2,827 (1282)

2,588 (1174)

2,143 (972)

-6 ft (1.83 m)

2,853 (1294)

2,609 (1183)

2,154 (977)

-8 ft (2.44 m)

2,949 (1338)

2,698 (1224)

2,189 (993)

-10 ft (3.05 m)

3,319 (1506)

3,053 (1385)

2,270 (1030)

-12 ft (3.66 m)

2,429 (1102)

-14 ft (4.27 m)

3,115 (1413)

Dipper Lift:
+14 ft (4.27 m)

3,154 (1431)

+12 ft (3.66 m)

4,343 (1970)

4,139 (1877)

2,981 (1352)

+10 ft (3.05 m)

4,027 (1827)

3,826 (1735)

2,823 (1281)

+8 ft (2.44 m)

4,112 (1865)

3,910 (1774)

2,855 (1295)

+6 ft (1.83 m)

4,563 (2070)

4,357 (1976)

3,010 (1365)

+4 ft (1.22 m)

5,398 (2449)

5,177 (2348)

2,948 (1337)

+2 ft (0.61 m)

3,486 (1581)

BACKHOE OPERATIONAL DATA

Standard Backhoe

Extendahoe

Retracted

Extended

14 ft 10 in (4.50 m)

14 ft 9 in (4.50 m)

18 ft 3 in (5.55 m)

Digging depth:

Maximum

2 ft (610 mm) flat bottom

14 ft 8 in (4.46 m)

14 ft 8 in (4.46 m)

18 ft 1 in (5.52 m)

8 ft (2.44 m) flat bottom

13 ft 8 in (4.16 m)

13 ft 8 in (4.16 m)

17 ft 4 in (5.29 m)

21 ft 11 in (6.68 m)
18 ft 4 in (5.57 m)

21 ft 11 in (6.68 m)
18 ft 4 in (5.57 m)

25 ft 4 in (7.72 m)
21 ft 8 in (6.60 m)

11 ft 9 in (3.59 m)

11 ft 9 in (3.59 m)

14 ft 1 in (4.30 m)

6 ft 9 in (2.04 m)

6 ft 9 in (2.04 m)

9 ft 4 in (2.84 m)

180

180

180

175.6
198.0

175.6
198.0

175.6
198.0

9 ft 5 in (2.87 m)
9 ft 9 in (2.97 m)

9 ft 5 in (2.87 m)
9 ft 9 in (2.97 m)

9 ft 5 in (2.87 m)
9 ft 9 in (2.97 m)

11,334 lb (50 414 N)

6,710 lb (29 484 N)

11,334 lb (50 414 N)

6,710 lb (29 484 N)

11,334 lb (50 414 N)

4,887 lb (21 738 N)

12.8
13.8

12.8
13.8

12.8
13.8

Overall reach from:

Rear axle centerline

Swing pivot

Loading height
Loading reach dipper retracted
Swing arc
Bucket rotation:

Straight links
Mechanical coupler

Stabilizer spread centers

Flip pad

Cast Pad
Digging force:

Bucket cylinder
Dipper cylinder

Leveling angle:

Flip pad
Cast pad

580N Page 5 of 7

STANDARD EQUIPMENT
OPERATOR ENVIRONMENT

POWERTRAIN

LOADER

See page 1

Front axle, as selected:

2WD heavy-duty front axle with
11.0 L x 16.0 tires
4WD heavy-duty mechanically driven front
axle with 12.0 L x 16.5 tires and drive
shaft guard

See page 2

Rear axle:
2 / 4WD heavy-duty outboard planetary drive
with 17.5 L x 24.0 tires

Replaceable, molded front bumpers

ENGINE
Case F5C diesel
Cooled EGR
Diesel Particulate Filter
Full flow engine oil filter
Air cleaner replaceable dry type
with radial seal
Aspirated air cleaner
Muffler, non spark arresting
Radiator with de-aeration bottle
Antifreeze to -34 F (-37 C)
Throttles, both hand and foot
Self adjusting belt tensioner
Glow plugs cold start
In line fuel strainer

4F-4R Power Shuttle Synchromesh

transmission
Torque converter 11.8 in (300 mm)
On-the-go electric 4WD control
Electric F/R shuttle control
Electric differential lock control, push-button
activation on the loader control lever
Park brake, spring-applied, hydraulic
release SAHR
HYDRAULICS
Pump 28.5 gal / min @ 3,000 lb / in
(107.9 L / min @ 207 bar)
Heavy-duty hydraulic oil cooler
7 micron, spin on oil filter

BACKHOE
See page 2
OTHER
Forward tilt engine hood
Front / Rear tie downs
Reflective logos
Lights cab and canopy:
2 rear tail / stop
2 front flashers / turn
2 rear flashers / turn
Lights cab only:
2 front driving lights 55 W

Adjustable halogen work lights 55 W:

2 front
2 side left and right
4 rear

Lights canopy only:

2 front driving lights 55 W
Adjustable halogen work lights 55 W:
2 side left and right
2 rear

OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT

ENGINE

BACKHOE

Auto Ride Control 4WD models

Cold Weather Starting Aid

with dual 12 Volt batteries

Auxiliary hydraulics with flow from

0 to 36 gal / min (0 to 136 L/min)

Standard Ride Control 2WD models

Comfort Steer with momentary latching
switch, two-speed steering pump and
3rd/4th gear cutout
ROPS/FOPS certified protective cab with rear
wipers and floor mat
Cab Convenience Package containing
pull-down sun visor, window washer front
and rear, left-hand storage tray, deluxe
interior package, tilt steering column, Sound
Reduction Package for cab models levels
reduced to 72 dB (A), right-hand .threshold
storage box, viscous fan
Air-conditioning for cab models
Mechanical suspension seat with flip-up
armrests, 180 swivel, cloth or vinyl,
adjustable seat and weight, backrest angle,
lumbar and cushion angle
Air Ride suspension seat with flip-up armrests,
180 swivel
Electric height adjustment, adjustable backrest
and lumbar support cab units cloth,
canopy units vinyl
Pull-down sun visor for canopy models
Radio, AM/FM Stereo/WB, MP3 auxiliary
input cab models

Block heater

Extendahoe

POWERTRAIN

Two-lever controls backhoe or Extendahoe

Powershift S-Type transmission, 4F-3R fully

synchronized, electronic transmission
controller and kick down in loader control
lever 2WD or 4WD

Pilot operated control system

Heavy-duty outboard planetary drive

without 19.5 L x 24.0 tires
HYDRAULICS
Auxiliary backhoe unidirectional hydraulics
Auxiliary backhoe bidirectional hydraulics:
Hand lever operated for manual controls
Button operated for pilot controls
LOADER
Auxiliary hydraulics for loader-mounted
equipment with thumb-operated
proportional control

Fingertip proportional Electro-Hydraulic

stabilizer controls
Thumb-operated proportional ElectroHydraulic Extendahoe control
Thumb-operated horn button
Thumb-operated auxiliary hydraulic control
Infinitely adjustable towers
In-cab switchable excavator to backhoe.
control pattern change
Flip over stabilizer pads
Cemetery / Street pads
Case mechanical quick coupler
Bucket retrofit kits

Hydraulic front quick coupler

Buckets see page 2

Bolt-on cutting edges

OTHER

Loader linkage without loader bucket

11.0 L x 16.0 10-ply, 12.0 L x 16.5 8-ply or

17.5 L x 24.0 10-ply front tires

Tool portfolio of additional attachments

Buckets see page 2

19.5 L x 24.0 10-ply rear tires

Rotating beacon
Special paint

3 in (75 mm) seat belt for mechanical and

air-suspension seat

Canopy lights Additional 2 front and 2 rear

halogen lights (55 W)
Tool box bolt-on, step-mounted
Lift hooks export
Front counterweights:
700 lb and 1,100 lb (318 kg and 500 kg)
Master disconnect switch and remote jump
start terminals

580N Page 6 of 7

NOTE: All specifications are stated in accordance with SAEStandards or Recommended Practices,
where applicable.
NOTE: All engines meet current EPA emissions requirements.
IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications without
notice and without incurring any obligation relating to such change. Case Construction Equipment Inc.
does not warrant the safety or reliability of attachments from other manufacturers.
Case is a registered trademark of CNHAmerica LLC. Any trademarks referred to herein, in association
with goods and/or services of companies other than CNHAmerica LLC, are the property of those
respective companies.
Form No. CCE201305580N
Replaces form no. CCE201207580N

Printed in U.S.A.
580N Page 7 of 7
All Case construction equipment is biodiesel ready.

www.casece.com
2013 CNHAmerica LLC
All Rights Reserved