Instrumentation Training Courses 2015 PDF

Instrumentation Training Courses for Engineers and
Technicians

By Eng. Mahmoud Abdel Fatah
Instrumentation Expert and Trainer
Experience 33Years
Instrument Engineer
To be specialized as
Instrument Technician
Trainer :Eng. Mahmoud Abdel Fatah Ahmed
[email protected]
Mob. 01148695492 Egypt
Trainer Videos on youtube

www.youtube.com/user/controlinstrument/videos
:
: Intex
Intex

: .
.
:
Intex
E.Mail mahmodcontrol @yahoo.com
01148695492
:
:
:
Mob. 01155560031
Mob. 01098290468
:
:

E.Mail mahmodcontrol @yahoo.com
Training Course 1
Operation and Control of Hydraulic and Pneumatic Systems

Course Content
- Components and Symbols of both Pneumatic and Hydraulic Systems .
- Directional Control Valves - Pilot Controlled Directional Control Valves .
- Operation Maintenance of Solenoids & Relays and Limit Switches .
- Constructions of Solenoids & Relays & Switches .
Test and Troubleshooting of Solenoids & Relays and Switches .
- Proximity Limit switches ( Inductive , Capacitive and Optical ) .
- Actuation of Single and Double Acting Cylinder.
- Electro pneumatic Circuits .
- Electrically Actuated Directional Control Valves .
- Applications of Pneumatic Directional Control Valves .
- Electrically Actuated Directional Control Valves and PLC applications .
- Solid-state relays and Bench Testing .
- Hydraulic Control systems and symbols .
- Hydraulic Pumps and Motors .
-Electro Hydraulic Proportional Directional control Valves and Actuators.
- CONSTRUCTION EQUIPMENT Hydraulics Forklift , Loader and Excavator )
- Hydraulic servo directional control valves .
- Hydraulic Pump , Cylinder and Motor Calculations .
Training Course 1
Training Course 2
Instrumentation Process Measurements

Course Content
- Definitions of Process Measuring and Control Instrumentation .
- Measurements of Process Variables (Temperature, Level , Pressure and Flow ).
- Temperature Measurement :
- Industrial applications of Thermocouples TC and Resistance Temperature
Detectors RTDs .
- Digital temperature Indicator Controllers .
- Test of TC and RTDs , Tables of TC and RTDs
- Temperature switches ( Calibration , Set and Reset )
- Applications of temperature Instruments in Control Systems .
Level Measurement:
- Level gauges , Bubbler tubes and Calibration of Level Switches
- Level Measurement by Hydrostatic Head for Open and Closed Tank .
- Level Transmitters : Differential Pressure Transmitter , Ultrasonic Transmitter ,
Transmitter , Magnetic Level Transmitter , Smart Level Transmitters
- Calibration and Configuration of Level Transmitters .
- Level switches ( Calibration , Set and Reset )
- Applications of Level Instruments in Control Systems .
- Pressure measurement :
- Practical Methods for Pressure Measurements
- Calibration and Maintenance of Pressure Gauges , and Ordering Gauges
- pressure switches ( Calibration , Set and Reset )
- Calibration and Configuration of Pressure Transmitters .
- Applications of Pressure Instruments in Control Systems .
Flow Measurement :
- Flow Measurement by using orifice plate- Differential pressure (d/p) meters

- Flow Rate Measurements by using(d/p) Transmitters and Installation
- smart transmitters Configuration and Calibration .
- Digital Flow rate Indicator Totalizer ( Calibration and Configuration )
- Flow Rate Transmitters and Square Root Extractor Input and Output
-Variable Area Flow meters - Purge-Flow Regulators
- Magnetic Flow Meters and Transmitters Turbine flow meters
- Applications of Flow Instruments in Control Systems .
Training Course 2
Instrumentation Process Measurements
Training Course 3
Control Valves
- Control valve function in process systems
- Applications of control valves used in process industries
- Installation, and calibration of valves and actuators., troubleshooting,
parts replacement, and calibration of control valves, actuators and positioners.
- Fisher Control valve single act position control Fisher 3660
- Control valves efficiency, product quality, maintenance safety
- Operation and calibration of Valve positioners
- Electro Pneumatic Positioner
-Electric Valve Actuators
- Control Valve Sizing
- Selection the correct control valve, actuator and accessories to operate through a
full range of process conditions.
Training Course 3
Control Valve
Training Course 4
Instrumentation Process Control
Proportional Integral Derivative Control ( PID )
Course Content
- Process Control Loops (Sensors , Transmitters , Controllers , Control Valves )
- Process Control by Digital Indicator controllers .
- Cascade Control Applications
- Control Modes :
On/OFF (Two Position Controller ) Differential Gap Controller
Cascade Control Ratio Control
PID Control ( Proportional Integral Derivative )
- Practical PID Control Algorithm
- Proportional Control (Proportional Band , Gain , Offset )
- Integral) (I) Reset Action
PI Control MPR ( Minutes Per Repeat)
- RPM (Repeats Per Minute) - Manual reset
- Derivative Action rate action .
- PI Proportional Plus Integral Action .
- PID Control Responses .
- Universal Digital Controllers .
- Programming and Configuration of Digital Controllers .
- Reverse and Direct Control Action .
- Process and Instrument Symbols .
- Process & Instrument Diagrams ( P& ID ) .
- Process Controller tuning methods .
- Troubleshooting of Process Control Loops .
- Troubleshooting of Process Control Loops
Training Course 4
Instrumentation Process Control
Proportional Integral Derivative Control ( PID )

Instrumentation Training Courses 2015 PDF

Uploaded by

Copyright:

Available Formats

Instrumentation Training Courses 2015 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Instrumentation Training Courses 2015 PDF

Uploaded by

Copyright:

Available Formats

Instrumentation Training Courses for Engineers and

Trainer Videos on youtube

- Flow Measurement by using orifice plate- Differential pressure (d/p) meters

You might also like