Ammonyx LO: CH3 - CH3 (CH2) X - N - O - CH3

Product
Name
Chemical
Structure
AMMONYX LO
CH3
|
CH3(CH2)x N > O
|
CH3
x = 11 (predominantly)
CAS Registry No.
1643-20-5
INCI Name
Lauramine Oxide
Applications
Functional Properties
Foam Enhancer
Foam Stabilizer
Viscosity Builder
Lubricant*
Bleach Stable
(*For the textile industry)
End Product Uses

Personal Care
Shampoos
Handsoaps
Bath Products
Creams & Lotions
Hair Conditioners
Household & I&I
Dishwashing Detergents
Cleansers
Hard Surface Cleaners

(which contain acids or bleach)
Emulsifier*
Wetting Agent*
Dye Dispersant*
Can be formulated with anionic, nonionic and cationic materials.
Acid Stable
Typical
Properties
Appearance at 25C.......................... Clear liquid

Amine Oxide (MW 251), %.............................. 30
Free Amine (MW 235), %............................. 0.49
pH, 10% aqueous .......................................... 8.0
Cloud Point (as is), C (F) ....................... -1 (30)
Boiling Point, C (F) ............................ 100 (212)
Preservative .................................... Not required
Color (APHA), as is ....................... 100 max.

Viscosity, cps at 25C.............................. 18
Flash Point (PMCC), C (F) ...... >94 (>201)
Density, g/ml (lbs/U.S. gal). .... 0.968 (8.05)
RVOC, U.S. EPA, %.................................. 0
Free Peroxide, % ................................. 0.13
Biodegradability
Product is readily biodegradable. A detailed biodegradability statement is available upon request.
Toxicity
The available toxicity data shows AMMONYX LO to be slightly toxic orally to rats, (LD50 = 3600 mg/kg). At
2.5% active, AMMONYX LO may cause severe eye irritation and minimal irritation to the skin.
Storage &
Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling
AMMONYX LO. Contact with the eyes and prolonged contact with the skin should be avoided. Wash
thoroughly after handling material.
It is recommended that AMMONYX LO be stored in sealed containers and kept at temperatures not lower
than 50F (10C) nor higher than 120F (49C). Avoid overheating or freezing.
Bulk Storage Information: Tanks, with a conservation vent, made of 316L stainless steel or fiberglass with an
Atlac 382 corrosion liner are recommended. Centrifugal or positive displacement gear pumps and piping
should be 316L stainless steel. Recommended storage for bulk tanks is 20-52C (68-125F).
Standard Packaging: AMMONYX LO is available in bulk and in 55 gallon drums (net weight 425 lb/193 kg).
Clearances
All components of AMMONYX LO are listed in the following countries; the registration numbers for the active
ingredients are included in parentheses: United States (TSCA 1643-20-5), Europe (EINECS 216-700-6),
Japan (ENCS 2-198), Canada (DSL 1643-20-5), Australia (AICS 1643-20-5), Korea (ECL Serial No. KE-
March 2013
Supersedes:
May 2010
AMMONYX , AMPHOSOL , STEOL , STEPANOL and NINOL are registered trademarks of Stepan Company.
Page 1 of 2
Clearances
11348), Philippines (PICCS 1643-20-5) and China (EICS 1643-20-5).

AMMONYX LO is cleared for use user 40 CFR 180.910, pre- and post-harvest applications.
AMMONYX LO meets DfE screen and is listed on www.cleangredients.org (an on-line database for green
formulators). For further information, visit www.cleangredients.org. Additional Stepan ingredient listing can be
found at www.stepan.com.
Formulations
CONDITIONING SHAMPOO
Ingredients
Wt, % (as is)
Function
32.8
Cosurfactant
1.
AMPHOSOL CA
2.
AMMONYX LO
32.0
Cosurfactant
3.
AMMONYX 4
1.7
Conditioning Agent
4.
Preservative, Dye, Fragrance
q.s.
Additives
5.
Citric Acid (50%)
q.s.
pH Adjuster
6.
Distilled Water
q.s. to 100.0
Solvent, Carrier
7.
Sodium Chloride
q.s.
Thickener
Mixing Procedure:
Add AMPHOSOL CA, AMMONYX LO and AMMONYX 4 to water. Heat with mixing to 40-50C (104-122F),
until AMMONYX 4 is completely blended into solution. Cool to 30-35C (86-95F). Add perfume, preservative
and dye, as desired. Adjust pH with citric acid to 6.0 - 6.5. Add sodium chloride to achieve desired viscosity.
Changing pH changes properties.
Physical Properties:
pH (as is) ................................................................................................................................. 6.0 - 6.5
Appearance at 25C .................................................................................................................... Liquid
GENTLE SHAMPOO
Additional
Safety
Information
Wt, % (as is)

Function
Ingredients
30.0
Primary Surfactant
1.
STEOL CS-330
15.0
Secondary Surfactant
2.
STEPANOL AM-V
3.
AMMONYX LO
1.0
Foam Enhancer/Foam Stabilizer
2.0
Foam Enhancer/Viscosity Booster
4.
NINOL 40-CO
5.
Glycerin
3.0
Humectant
6.
Methocel E4M (Dow Chemical)
0.4
Thickener
7.
Sodium Chloride
1.0
Thickener
8.
Citric Acid (50%)
q.s.
pH Adjuster
9.
Preservative, Dye, Fragrance
q.s.
Additives
10.
Distilled Water
q.s. to 100.0
Solvent, Carrier
Mixing Procedure:
Heat one third of the required water to 80C (176F). Add Methocel E4M and agitate until all particles have
been dispersed. Turn off heat and add the remainder of the water. Agitate until the solution is clear and particle
free. Add items 1 through 6 and blend until homogeneous. Adjust pH with citric acid to 6.0 - 6.5. Viscosity may
be modified by adjusting the sodium chloride content.
Physical Properties:
pH (as is) ................................................................................................................................. 6.0 - 6.5
Appearance at 25C .................................................................................................................... Liquid
A Material Safety Data Sheet is available upon request.
Nothing contained herein grants or extends a license, express or implied, in connection with patents, issued or pending, of
the manufacturer or others. The information contained herein is based on the manufacturer's own study and the works of
others. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or adequacy of
the information contained herein. The manufacturer shall not be liable (regardless of fault) to the vendee's employees, or
anyone for any direct, special or consequential damages arising out of or in connection with the accuracy, completeness,
adequacy or furnishing of such information.
Stepan
March 2013
Supersedes:
May 2010
Page 2 of 2
Corporate Headquarters
Northfield, Illinois 60093, U.S.A.
847-446-7500
847-501-2100 fax
Website: www.stepan.com
2013, Stepan Company. All rights reserved.
For Technical Service Call: Northfield, IL USA 800-745-7837

Longford Mills, Canada 705-326-7329 Mexico City, Mexico +52-555-533-1697
Voreppe, France +33-476-505-100 Bogota, Colombia +57-1-6362808
Stalybridge, United Kingdom +44-141-338-9083
Manila, Philippines +632-891-1708

Ammonyx LO: CH3 - CH3 (CH2) X - N - O - CH3

Uploaded by

Copyright:

Available Formats

Ammonyx LO: CH3 - CH3 (CH2) X - N - O - CH3

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ammonyx LO: CH3 - CH3 (CH2) X - N - O - CH3

Uploaded by

Copyright:

Available Formats

Product

CAS Registry No.

End Product Uses

Creams & Lotions

Household & I&I

Hard Surface Cleaners

Appearance at 25C.......................... Clear liquid

Color (APHA), as is ....................... 100 max.

Product is readily biodegradable. A detailed biodegradability statement is available upon request.

11348), Philippines (PICCS 1643-20-5) and China (EICS 1643-20-5).

Wt, % (as is)

2013, Stepan Company. All rights reserved.

For Technical Service Call: Northfield, IL USA 800-745-7837

You might also like