Nagpur CSR

Government of Maharashtra
Public Works Region, Nagpur
Schedule of Rates 2014-2015
For Nagpur, Bhandara, Gondia, Wardha,

Chandrapur & Gadchiroli District
(w.e.f. 01/07/2014)
CURRENT SCHEDULE OF RATES 2014-2015

INDEX
Chapter
Classification of Items
General Notes
Building Works
Page No.
I
VI
Bd-A
Excavation
Bd-B
Pile Foundation
--
Bd-C
Structural Steel Work
Bd-E
Plain Cement Concrete
12
Bd-F
Reinforcement Cement Concrete
13
27
Bd-G
Brick Work
28
31
Bd-H
Stone Masonary
32
--
Bd-I
Cement Concrete Hollow Block Masonary
33
--
BD-J
Water Proofing
34
41
10
BD-J-1
Repairs & Rehabilitation
42
43
11
Bd-K
Expansion Joints
44
--
12
Bd-L
Plastering and Pointing
45
52
13
Bd-M
Paving , Flooring and Dado
53
64
14
Bd-N
Wood Finish
65
66
15
Bd-O
Oil Painting
67
75
16
Bd-P
Colour/White Washing , Distempering
76
78
17
Bd-Q
Wood Work
79
83
18
Bd-R
Roofing and Ceiling
84
99
19
Bd-T
Doors and Windows
100 130
20
Bd-U
Iron Work
131 134
21
Bd-V
Water Supply and Sanitary Fittings
135 160
22
Bd-W
Miscellaneous
a)
Antitermite and Pest control
161 164
b)
Guniting
165 166
c)
Fencing Work
167 169
d)
Dismentaling
170 178
Chapter
Classification of Items
Page No.
BR
Bridge Works
179 206
CD
Cross Drainage Works
207 209
RD
Road Works
5(A)
Excavation & Embankment
210 217
5(B)
WBM Road Construction
218 224
5(C)
Asphaltic Construction
225 243
5(D)
Concrete Pavement
244 265
5(E)
Protection Work
266 267
5(F)
Road Furniture
268 285
Survey Work
Material Rates
286 305
306 317
Labour Rates
318
9
10
Transportation Rates
Rates for Loading &
Unloading , Stacking &
Transportation, Materials
319 321
11
12
Machinary hire charges
324 325
326 -
13
Approval to C.S.R. 2014- 15
Consumption Of Cement
for different grades of
concrete
322 323
327
GENERAL NOTE
1)
The schedule of rates for the year 2014 - 2015 is applicable for Public Works Region,
Nagpur as per circular No. TS /SENAG ./ CSR / 1119 / 2014 dated 13.08.2014 with
effect from 01 /07/ 2014

2)
For the rates in notified Tribal areas, Hilly and inaccessible areas, corporation area, Municipal
Council area, Sugar producing area, Jail premises and naxalite affected area an increase of
percentage over schedule of rates prescribed as follows.
a)
Notified Tribal areas or HiIly or inaccessible areas
10%
b)
Corporation areas
5%
c)
Municipal Council areas
4%
d)
Sugar cane producing areas
5%
e)
Jail premises
15%
f)
Naxalite affected area ( For all works in

Gadchiroli District.) As per Govt. of
Maharashtra, GAD letter No.VVK2009/CR 102/Desk-1415 dated
31/12/2009.)
20%
( i ) The Superintending Engineers should specify the sugarcane producing & tribal areas
under their circle.
( ii ) If Jail premises is situated in Corporation or Municiple area, an increase of 5% or 4%
respectively shall not be added.
( iii ) For Gadchiroli District Notified Trible area, Hilly or inaccessible area, an increase shall
be (10% + 20%) = 30%
A)
If the material is supplied by the Department the above percentage shall be applied on the
cost of item after deducting the cost of material including VAT as applicable as per note No.
3 below.
B) If the material is to be brought by the Contractor the above percentage shall be applied to the
cost of item directly.
C) Items which are not included in this schedule of rates shall be adopted from schedule of
rates for National Highway works Nagpur Region for the corrosponding year.
(I)
3)
Schedule of rates are based on the following rates of materials inclusive of VAT at the rate
of 12.5% for Cement, Bitumen & Emulsion and 5% for Steel.
Rates are inclusive of VAT

at the rate of 12.5% for Cement, Bitumen & Emulsion
and 5% for Steel
Sr. No.
Material
Rates Proposed for 2014-15
Cement
Rs.5800/- Per M.T.
Mild Steel (Fe-500)
Rs.44300/-Per M.T.
TMT Steel Bars
Rs. 46000/-Per M.T.
Structural steel
Rs. 47500/-Per M.T.
Bitumen
Bulk VG-10
Rs. 52895/-Per M.T.
Bitumen
Packed VG-10
Bitumen
Bulk VG-30
7
8
10
11
(Ex-Refinery Mumbai)
Rs. 56885/-Per M.T.
Rs. 53925/-Per M.T.
Rs. 57915/-Per M.T.
Bitumen
Packed VG-30
Rs. 57580/-Per M.T.
Bitumen
Bulk VG-40
Bitumen
Packed VG-40
Rs. 61570/-Per M.T.

Medium setting Hincol

Bitumen Emulsion
i) Bulk Rs. 45446/-Per M.T.

ii) HDPE Rs. 52632/-Per M.T.
a)
The rates of bulk / packed Bitumen adopted for the items of bituminous works are based
on the prevailing rates on 01.06.2014 Exrefinery Mumbai .The rates of Medium setting
Hincol Bitumen Emulsion for packed drums are based on the prevailing Rates on
01.06.2014.
b)
The rates of cement and steel are applicable at District & Taluka headquarters.
(II)
4)
References of Standard PWD Specifications / MORTH specifications are mentioned below

the description of items.
5)
(a) For specific tests like taking bores, span load tests, plate load test etc. which are not
included in the rate analysis of the items. Estimates for these test shall be prepared on the
basis of rates approved by Superintending, Engineer, Vigilance & Quality Control Circle,
Nagpur or D.S.R. approved by MERI Nashik.
6)
(b) For angle boring & drilling in standing water the rate will be 1.5 times the usual drilling
charges.
Royalty charges are included in the basic rates of material .
7)
The charges towards quality control tests is considered in the scheduled rates.
8)
M.VAT as applicable is already considered for the different item of works in Schedule of
Rates.
9)
BUILDING WORKS
a) For Building works, basic lead upto 5 Kms. is considered for all completed items.
b) The floor is designated by the space contained within the top of the virgin slab / roof
covering below to the top of the virgin slab / roof covering above.
c(i) for every additonal floor percentage increase in the rates shall be considered for the
items in the following section as given in table without deducting the cost of cement and steel.
Sr. No
Section
Item
Percentage Increase
For Every For Every
Floor up to Floor above
4th Floor
4th Floor
BDF, BDG
R.C.C. B.B.Masonry
ii
BDF
M.S./HYSD/TMT Reinforcement
0.25
iii
BDJ
Water Proofing Treatement
iv
BDL
Plastering,Poiinting
BDM
Flooring Dado skirting treads ( except

Ceramic tiles,Glazed tiles)
vi
BDM
Ceramic tiles, Glazed tiles,flooring dado
0.25
(III)
Sr. No
Section
Item
vii
Percentage Increase
For Every For Every
Floor up to Floor above
4th Floor
4th Floor
4
a) External Painting
b) Internal Painting
BDO
viii
BDR
Mangolare tile roof,Ridges Ceiling
ix
BDT
Weather Shade Replacing External Window

shutter using scaffolding
0.25
0.25
Soil,waste,vent and rain water pipes and

sanitary wares etc.
0.25
Item not covered under Sr.No. i to xi above
0.25
BDU /BDC Structural Steel Work,Tubular trusses
xi
BDV
xii
c (ii) The precentage increase in rates as above should be on the rate of Current Schedule of
Rate for that item.
c (iii) Items to be carried out above terrace such as water proofing treatment on terrace,
water storage tank, parapet wall with coping , staircase, lift room with slab, plastering painting
etc required for the completion of building are assumed to be the items of it's lower floor.
d) In Nagpur Corporation area and Chandrapur Municipal area the use of clay bricks is
prohibited on original works. For such works only fly-ash bricks shall be used , except for
foundation of load bearing structures.The Clay Bricks can be used for Maintenance Work
only.
(IV)
e) The use of wooden centering & formwork including wooden props is prohibited. Only
plywood or steel formwork is to be used with steel props.
f) With a view to conserve the natural resources, the use of country teak wood for doors and
windows shall be avoided as for as possible, except for doors located on the external face of
the building.
g) For the items of oil painting, distempering under Bd - 0 & Bd - P, the sample shall be got
approved by Executive Engineer & a note regarding make / Company of approved sample
shall be taken by concerned Junior Engineer in measurement book. Unless that is done, the
measurement should not be treated as completes.
h) False celling shall be of Gypsum Board only, for using any other suitable material for false
celling S E's permission shall be sought.
i) The pattern of fixing flooring tiles / stones shall be got approved from Dy. Chief Architect/S
E.
j) Prior permission of Chief Engineer in writing is necessary before execution of item of paving
block as per Govt. Resolution No. CAT-10/11/ case no. 360/Building, Mantralaya Mumbai,
Dated 09/12/2011.
Items of doors and windows with Iron Oxidised fixtures and fastenings are considered. For
other types of fixtures and fastenings add percentage as given below per square metre rate.
Fixtures and Fastenings

FOR DOORS
Chromium Plated
2%
Aluminium Oxidised / Stainless

steel
5%
Stainless steel with matt finish
6%
Brass
20%
Brass Oxidised
23%
FOR WINDOWS
Chromium Plated
1%
Aluminium Oxidised / Stainless

steel
3%
Stainless steel with matt finish
4%
Brass
15%
Brass Oxidised
17%
(V)
10) ROAD WORK

a) Rates for collection of material for road work, are at quarry site with lead upto 50 mtrs.
Lead charges shall be considered separately while preparing the estimate for road
work. For concrete pavement items basic lead of 5 km is considered.
11)
For bridge work and C.D. work basic lead of 5 Km. is considered.
For working out rates for items with leads more than 5 km. the estimate should be prepared
for actual leads deducting initial lead charges of 5 km. for all completed items except items
of road work.
12 ) Additional lift for bridge items :For additional lift for various bridge items as per list given below , rate shall be increased in
percentage given below. Lift is to be measured with respect to common datum level for raft
foundation the datum level shall be raft top. For other type of foundation, average bed level
shall be treated as datum.
a) Pier ,Abutment,Returns, Wing
wall, Pier cap,Box Returns.Upto
4.00m
b) For every additional 2.00 m
beyond 4.00 m from datum
Nil
3.50%
13) Work in Foul Condition

a) For such work The rate for excavation shall be increased by 25% over the scheduled rates
of excavation.
b) For other items required to be executed in foul condition upto Ground Level / Bed Level the
rate shall be increased by 5% over schedule rates of individual items of CSR. This increase
is over and above the increase admissible under general note 2.
c) The above hike in rates of (a) & (b) shall be subject to the express condition that the prior
approval of Superintending Engineer is obtained. The foul condition shall be certified by the
Executive Engineer.
15) Hot Mix Hot Laid Bituminous Works
a) The items of hot mix hot laid bituminous works are excluding transportation of bulk bitumen
from refinery to plant site. Cost of bitumen considered in these items is as rates described in
note (3) under column 3 (inclusive of VAT 12.5%) Ex Mumbai refinery.
b) For hot mix hot laid B.T. items rates do not include any initial lead for crushed metal as
well as for hot mix material. Lead for transportation of crushed metal from quarry to plant site
and lead of transportation of hot mix material from plant to work site shall be added seprately.
c) For transportation of Hot Mix Material from plant to work site , the loose quantity of Hot Mix
Material shall be considered while preparing the estimate.
d) Quantity of bitumen has been taken from MORTH specification of Roads & Bridges 2013.
The actual quantity will depends upon the job mix formula wherever applicable.
(VI)
BD - A :
EXCAVATION
SR.NO.
&
CODE
NO.
DESCRIPTION OF ITEMS
1
BDA
1
Excavation for foundation in earth, soils of all

types, sand, gravel and soft murum,
including removing the excavated material
upto a distance of 50 m. beyond the building
area and stacking or spreading as directed,
preparing the bed for the foundation and
necessary back filling, with approved
material ramming, watering, including shoring
and strutting as necessary complete.
A) Excluding Dewatering
i. Lift upto 1.5 m.
ii. Lift above 1.5 m to 3.00 m.Depth
iii Lift above 3.00 m. Depth
B) Including Dewatering
i. Lift upto 1.5 m.
Spec.No. : Bd.A.1/Page No.259
2
BDA
2
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Cu.m
Cu.m
Cu.m
132.00
143.00
155.00
132.00
143.00
155.00
Cu.m
Cu.m
Cu.m
137.00
148.00
159.00
137.00
148.00
159.00
Cu.m
Cu.m
Cu.m
148.00
160.00
174.00
148.00
160.00
174.00
Cu.m
Cu.m
Cu.m
155.00
166.00
179.00
155.00
166.00
179.00
Excavation for foundation in hard murum

including removing the excavated material
upto distance of 50 meteRs. beyond the
building area and stacking or spreading as
directed, preparing the bed for the foundation
and necessary back filling, ramming, watering
including shoring and strutting etc. complete.
i. Lift upto 1.5 m.
i. Lift upto 1.5 m.
Spec. No. : Bd.A. 2/Page No. 259
SR.NO.
&
CODE
NO.
3
BDA
3
Excavation for foundation in Hard Murum and

boulders including removing the excavated
materials upto a distance of 50 meteRs.,
beyond the building area and stacking or
spreading as directed, preparing the bed for
the foundation and necessary back filling,
ramming, watering including shoring and
strutting etc. complete.
i. Lift upto 1.5 m.
i. Lift upto 1.5 m.
4
BDA
4
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Cu.m
Cu.m
Cu.m
160.00
173.00
184.00
160.00
173.00
184.00
Cu.m
Cu.m
Cu.m
168.00
179.00
192.00
168.00
179.00
192.00
i. Lift upto 1.5 m.
Cu.m
360.00
360.00
Cu.m
372.00
372.00
Cu.m
364.00
364.00
Cu.m
376.00
376.00
Excavation for foundation in soft rock, and

old cement or lime masonry foundations
including removing the excavated materials
upto a distance of 50 meteRs. beyond the
building area and stacking as directed
including preparing the bed for the foundation
and necessary back filling, ramming, watering,
including shoring and strutting etc.complete.
i. Lift upto 1.5 m.
SR.NO.
&
CODE
NO.
UNIT
5
BDA
5
Excavation for foundation in hard rock by

blasting including trimming and levelling the
bed by chiselling wherever necessary, and
removing the excavated materials and
stacking it in measurable heaps within a
distance of 50 metres beyond the building
area including preparing the bed for
foundation and necessary back filling,
watering, ramming, etc. complete.
i. Lift upto 1.5 m.
i. Lift upto 1.5 m.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Cu.m
Cu.m
456.00
481.00
376.00
394.00
Cu.m
461.00
377.00
Cu.m
498.00
398.00
Cu.m
Cu.m
565.00
584.00
528.00
551.00
Cu.m
Cu.m
568.00
589.00
530.00
557.00
Filling in plinth and floors with approved Cu.m.

excavated materials in 15 cm. to 20 cm.
layers including watering and compaction
complete.
66.00
66.00

6
BDA
6
7
BDA
10
Excavation for foundation in hard rock by

chiselling, wedging, line drilling, etc.
including trimming and levelling the bed,
removing the excavated materials and
stacking it in measurable heaps within a
distance of 50 meteRs. beyond the building
area, including preparing the bed for
foundation and necessary back filling,
watering, ramming, etc. complete.
i. Lift upto 1.5 m.
i. Lift upto 1.5 m.
SR.NO.
&
CODE
NO.
8
BDA
11
UNIT
Filling in plinth and floors with contractors Cu.m.

approved material / murum / stone dust in
15 cm. to 20 cm. layers including watering and
compaction complete.( Including Royalty)
RATES FOR 2014-15

(In Rs.)
Completed
Labour
300.00
71.00

9
BDA
13
Providing and filling in the foundation and Cu.m.

plinth with sand of approved quality including
watering, compaction complete.
( Including Royalty)
349.00
71.00
10
BDA
14
Providing soling using 80 mm size granite / Cu.m.

quartzite / gneiss / trap metal in 15 cm. layer
including hand packing filling voids with sand /
grit, ramming, watering etc complete.
( Including Royalty)
Spec. No. : As directed by Engineer-in-charge.
493.00
122.00
BD - B : PILE FOUNDATION
SR.NO.
&
CODE
NO.
UNIT RATES FOR 2014-15

(In Rs.)
Providing single under reamed piles of

specified diameter with following grade of
concrete including boring, under reaming in
all sorts of soils, filling the bulb and stem
with
C.C.mix
(excluding
steel
reinforcement) as per detailed specification
and drawings etc. complete.
i) 20 cm diameter
M-20 grade
M-25 grade
ii) 25 cm diameter
M-20 grade
M-25 grade
Completed
Labour
Rmt.
Rmt.
390.00
402.00
0.00
196.00
196.00
0.00
Rmt.
Rmt.
573.00
585.00
206.00
210.00
iii) 30 cm diameter
M-20 grade
M-25 grade
Rmt.
Rmt.
713.00
731.00
216.00
216.00
iv) 37.50 cm diameter

M-20 grade
Rmt.
979.00
1005.00
231.00
231.00
750.00
770.00
226.00
226.00
1155.00
1194.00
242.00
242.00
M-25 grade
Spec. No. : I.S. 2911 Part I 1964 Clause
No. 6.1.5.
2
Rmt.
Providing double under reamed piles of

specified diameter with following grade of
concrete including boring, under reaming in
all sorts of soils filling the bulbs and stem
with
C.C.
mix
(excluding
steel
reinforcement) as per detailed specification
and drawings etc. complete.
i) 30 cm diameter
M-20 grade
Rmt.
M-25 grade
Rmt.
ii) 37.50 cm diameter

M-20 grade
Rmt.
M-25 grade
Rmt.
Spec. No. : I.S. 2911 Part I 1964 Clause
No. 6.1.5.
BD - C :
SR.NO.
& CODE
NO.
1
BDC
2
STRUCTURAL STEEL WORK

UNIT
Providing and fabricating structural steel

work in rolled sections like joists, channels,
angles, tees etc. as per detailed design and
drawings or as directed including cutting,
fabricating, hoisting, erecting, fixing in position
making riveted / bolted / welded connections
without connecting plates, braces etc. and
including one coat of anticorrosive paint and
over it two coats of oil painting of approved
quality and shade complete.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
M.T.
64975.00
8150.00
M.T.
58751.00
3996.00
M.T.
64201.00
4947.00
Spec. No. : Bd.C. 2/Page No. 275

2
BDC
3
Providing and fabricating structural steel

work in rolled sections, fixed with connecting
plates or angle or angle cleats in main and
cross beams, hip and jack rafters, purlins
connecting to truss members and the like,
as per detailed design and drawings or as
directed including cutting, fabricating, hoisting,
erecting, fixing in position, making riveted/
bolted / welded connections and one coat of
anticorrosive paint and over it two coats of oil
painting of approved quality and shade
complete.
3
BDC
6
Providing structural steel work in single

stanchions composed of R.S.J. Channel etc.
with caps, bases, mild steel plates, angle
brackets, cleats, gusset plates, anchor
bolts etc. as per detailed design and drawings
or as directed including cutting, fabricating,
hoisting,erecting fixing in position, making
riveted / bolted / welded connection and one
coat of anticorrosive paint and over it two
coats of oil painting of approved quality and
shade complete.
SR.NO.
& CODE
NO.
4
BDC
8
UNIT
Providing structural steel work in trusses,

other similar trussed purlins and members with
all bracing, gusset plates etc. as per detailed
design and drawings or as directed including
cutting, fabricating, hoisting, erecting fixing in
position, making riveted /bolted/welded
connection and one coat of anticorrosive paint
and over it two coats of oil painting of
approved quality and shade complete.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
M.T.
72267.00
12865.00
M.T.
67471.00
12139.00
M.T.
74422.00
6212.00

5
BDC
10
Providing and erecting structural steel for

sakav with all bracings gusset plates etc. as
per detailed design and drawings or as
directed including cutting fabricating, hoisting,
erecting, fixing in position, making riveted,
bolted, welded connection one coat of
anticorrosive paint and two coats of oil paint of
approved quality and shade complete.
6
BDC
11
Providing, fabricating and erecting at site of

work the tubular steel structure (shed) of
standard size as per standard design and
specifications having various spans ranging
from 6 mt. to 18 mt. Length in between
trusses and in multiples of standard length of
bays as specified as per standard
specifications inclusive of cost of steel tubular
trusses, tubular columns, (3.5 m.height),
purlins, tie runners, foundation bolts, base
plates, nuts and bolts, welding wherever
required etc. as per detailed drawing inclusive
of one coat of anticorrosive paint and two
shade complete
SR.NO.
& CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Providing structural steel work of rectangular

hollow steel section for steel trusses, other
similar trussed items like purlin and members
with all bracing, gusset plates etc. as per
detailed designs and drawings or as directed
including
cutting,
fabricating,
hoisting,
erecting,
fixing
in
position
making
riveted/bolted/ welded connections and one
coat of anticorrosive paint and over it two
shade complete.
M.T.
76594.00
9681.00
8
BDC
12A
Providing Gas or Electrical welding for

structural steel sections, plates as per detailed
drawing, for less than 10 mm thick section
Cm.
3.50
1.50
BD - E : PLAIN CEMENT CONCRETE

SR.NO.
& CODE
NO.

(In Rs.)
Completed
1
BDE
1D
Providing and laying in situ, cement concrete

in 1:5:10 of trap/ granite/quartzite/gneiss
metal for foundation and bedding / below
pile caps including bailing out water,
plywood/steel formwork, compacting, finishing
uneven and honeycombed surface curing etc
complete. The Cement Mortar 1:3 plaster is
considered for rendering uneven and
honeycombed surface only. Newly laid
concrete shall be covered by gunny bag,
plastic, tarpaulin etc. (Wooden centering
will not be allowed.)
Labour
Cu.m 2638.00
519.00
Cu.m 2907.00
519.00
Spec. No. : Bd.E. 1/Page No. 287/I.S. 456

(2000)
2
BDE
1C
Providing and laying in situ, cement concrete

in 1:4:8 of trap/ granite/quartzite/gneiss metal
for foundation and bedding including bailing
out
water,
plywood/steel
formwork,
compacting,
finishing
uneven
and
honeycombed surface curing etc. complete.
The Cement Mortar 1:3 plaster is considered
for rendering uneven and honeycombed
surface only. Newly laid concrete shall be
covered by gunny bag, plastic, tarpaulin
etc. (Wooden centering will not be
allowed.)
(2000)
SR.NO.
& CODE
NO.

(In Rs.)
Completed
3
BDE
1A
Providing and laying in situ, cement concrete Cu.m. 3457.00

M-10/(1:3:6) of trap/granite/quartzite/gneiss
metal for foundation and bedding including
plywood/steel formwork bailing out water,
compacting,
finishing
uneven
and
honeycombed surface, curing etc. complete.
allowed.)
Labour
526.00

(2000)
4
BDE
1
Providing and laying in situ, cement concrete Cu.m. 4149.00

M-15 of trap/ granite/quartzite/gneiss metal
for foundation and bedding including bailing
out
water,
plywood/steel
formwork,
compacting,
finishing
uneven
and
honeycombed surface, curing etc. complete.
allowed.)
(2000)
10
542.00
SR.NO.
& CODE
NO.

(In Rs.)
Completed
5
BDE
2
Labour
Providing and casting in situ cement concrete

of
required
grade
of
trap/
granite/quartzite/gneiss metal for steps
including steel centering, plywood/steel
formwork, compacting, roughening them if
special finish is to be provided, finishing
uneven and honeycombed surface and curing
etc. complete. The Cement Mortar 1:3 plaster
is considered for rendering uneven and
honeycombed surface, only. Newly laid
Cu.m. 4314.00
a) For C.C. M-15
573.00
Cu.m. 4580.00
596.00
Providing and casting in situ cement concrete Cu.m. 4232.00

M-15 of trap/ granite/quartzite/gneiss metal
for coping to plinth or parapet, moulded or
chamfered as per drawing or as directed
formwork compacting, roughening them if
630.00
b) For C.C. M-20

(2000)
6
BDE
3

(2000)
11
SR.NO.
& CODE
NO.

(In Rs.)
Completed
7
BDE
4
8
BDE
5

of
required
grade
of
trap/
granite/quartzite/gneiss metal for bed blocks,
foundation blocks and such other items
including bailing out water, plywood/steel
formwork, compacting, roughening them if
Cu.m. 4314.00
a) For C.C. M-15
Cu.m. 4580.00
b) For C.C. M-20
(2000)
Labour
573.00
595.00

of
required
grade
of
trap/
granite/quartzite/gneiss metal for plain or
molded sills, cornice, jambs, block in
course, or architraves of required size and
shapes
including
steel
centering,
plywood/steel
formwork,
compacting,
roughening them if special finish is to be
provided,finishing uneven and honeycombed
surface and curing etc. complete. The Cement
Mortar 1:3 plaster is considered for rendering
uneven and honeycombed surface only.
Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc. (Wooden
centering will not be allowed.)
Cu.m. 4428.00
a) For C.C. M-15
620.00
Cu.m. 4692.00
635.00
b) For C.C. M-20

(2000)
12
BD - F : REINFORCED CEMENT CONCRETE

SR.NO.
&
CODE
NO.
1
BDF
1A
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour

of required grade of trap / granite /quartzite
/gneiss metal for R.C.C. pile caps as per
detailed design and drawings including bailing
out water, steel centering, plywood/ steel
formwork, compacting, finishing uneven and
honeycombed surface with C.M.1:3 of
sufficient minimum thickness to give smooth
and
even
surface
and
curing
etc.
complete.(excluding
reinforcement
,
including cover block). The Cement Mortar
1:3 plaster is considered for rendering uneven
and honeycombed surface only. Newly laid
will not be allowed)
a) For C.C.M-20
Cu.m.
4851.00
696.00
b) For C.C.M-25
Cu.m.
5016.00
726.00
Spec.No.: Bd.F.7/Page No.297/I.S. 456 (2000)
13
SR.NO.
&
CODE
NO.
2
BDF
3
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
4916.00
5060.00
696.00
726.00
Providing and laying in situ cement concrete

of required grade of trap / granite/ quartzite /
gneiss metal for R.C.C. work in foundations
like raft, grillages, strip foundations and
footings of R.C.C.columns and steel
stanchions including bailing out water,
plywood/steel formwork, compaction, curing
and roughening the surface if special finish is
to be provided, finishing uneven and
honeycombed surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface etc. complete. (Excluding
reinforcement
and
structural
steel,
including cover block) The Cement Mortar
a) For C.C.M-20
b) For C.C.M-25
Cu.m.
Cu.m.
14
SR.NO.
&
CODE
NO.
3
BDF
5
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour

of required grade of trap / granite /quartzite/
gneiss metal for R.C.C. columns as per
detailed design and drawings or as directed,
formwork, compaction, finishing uneven and
sufficient minimum thickness to give a smooth
and even surface or roughening the surface if
special finish is to be provided and curing etc.
complete. Including use of plastisizer
wherever necessary as directed by Engineer
(Excluding reinforcement, including cover
block). The Cement Mortar 1:3 plaster is
considered for rendering uneven and
a) For C.C.M-20
Cu.m.
6176.00
1084.00
b) For C.C.M-25
Cu.m.
6320.00
1114.00
Sq.m.
142.00
45.00
spec.No.: Bd.F.5/Page No. 300/I.S. 456(2000)
4
BDF
27
Providing and laying 50 mm thick layer in

cement mortar 1:8 below plinth beam
including floating, watering, curing and leveling
and ramming the bed if necessary before
laying the layer etc. complete.
Spec.No.: As directed by Engineer- in-charge.
15
SR.NO.
&
CODE
NO.
5
BDF
6A
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Cu.m.
6299.00
1316.00
Cu.m.
6448.00
1341.00

/gneiss metal for R.C.C. beams and lintels as
per detailed design and drawings or as
directed,including
steel
centering,
plywood/steel
formwork
steel
props,
compaction,
finishing
uneven
and
honeycombed surface with C.M.1:3 of
and even surface or roughening if special
finish is to be provided and curing etc.
complete. Including use of plastisizer
wherever necessary as directed by EngineerIn-charge
(Excluding
reinforcement,
including cover block). The Cement Mortar
a) For C.C.M-20
b) For C.C.M-25
16
SR.NO.
&
CODE
NO.
6
BDF
9A
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Cu.m.
6600.00
1392.00
Cu.m.
6737.00
1424.00

of required grade of trap / quartzite / granite/
gneiss metal for R.C.C. chajja as per detailed
design and drawings including steel centering,
plywood/steel
formwork,
steel
props,
compaction
finishing
uneven
and
special finish is to be provided and curing
etc.complete.(Excluding
reinforcement,
and honeycombed surface only.Newly laid
a) For C.C.M-20
b) For C.C.M-25
17
SR.NO.
&
CODE
NO.
7
BDF
10A
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour

of required grade of trap / quartzite /granite
/gneiss metal for R.C.C. canopy as per
detailed design and drawings including steel
centering, plywood / steel formwork, steel
props,compaction, finishing uneven and
and even surface or roughening surface if
complete.
(Excluding
reinforcement,
a) For C.C.M-20
Cu.m.
7064.00
1398.00
b) For C.C.M-25
Spec.No.: Bd.F.10/ Page No.304/I.S. 456
(2000)
Cu.m.
7201.00
1429.00
18
SR.NO.
&
CODE
NO.
8
BDF
16
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
8273.00
8418.00
1455.00
1487.00

of required grade of trap / granite /gneiss /
quartzite metal for R.C.C. fins of required
thickness in position as shown on the
drawings or as directed by Engineer-in-charge
including steel centering, plywood / steel
formwork, steel props, compaction, finishing
uneven and honeycombed surface with C.M.
1:3 of sufficient minimum thickness to give a
smooth and even surface or roughening the
surface if special finish is to be provided and
curing
etc.
complete.
(Excluding
reinforcement, including cover block) The
Cement Mortar 1:3 plaster is considered for
rendering uneven and honeycombed surface
only.Newly laid concrete shall be covered
by gunny bag, plastic, tarpaulin etc.
(Wooden centering will not be allowed)
a) For C.C.M-20
b) For C.C.M-25
Spec.No.: Bd.F.16/Page
(2000)
Cu.m.
Cu.m.
No.306/I.S.
19
456
SR.NO.
&
CODE
NO.
9
BDF
7A
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
7501.00
7645.00
1348.00
1379.00

/gneiss metal for R.C.C.Portals as per
detailed design and drawings or as directed
uneven and honeycombed surface with
C.M.1:3 of sufficient minimum thickness to
give a smooth and even surface or roughening
the surface if special finish is to be provided
and curing etc. complete. (Excluding
reinforcement, including cover block). The
only. Newly laid concrete shall be covered
by gunny bag, plastic, tarpaulin etc.
a) For C.C.M-20
b) For C.C.M-25
20
Cu.m.
Cu.m.
SR.NO.
&
CODE
NO.
10
BDF
15A
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour

of required grade of trap /granite / gneiss/
quartzite metal for R.C.C. arches with skew
backs as per detailed design and drawings or
as directed including steel centering,
plywood/steel
formwork,
steel
props,
compaction,
finishing
uneven
and
complete.
(Excluding
reinforcement,
and honey combed surface only. Newly laid
a) For C.C.M-20
Cu.m.
7334.00
1429.00
b) For C.C.M-25
Spec.No.: Bd.F.15/Page No.306/I.S. 456
(2000)
Cu.m.
7478.00
1462.00
21
SR.NO.
&
CODE
NO.
11
BDF
8A
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour

/gneiss metal for R.C.C slabs and landings
as per detailed design and drawings including
steel centering, plywood /steel formwork, steel
props, compaction, finishing uneven and
complete. (Excluding reinforcement, including
cover block) The Cement Mortar 1:3 plaster is
considered for rendering uneven and honey
combed surface only. Newly laid concrete
shall be covered by gunny bag, plastic,
tarpaulin etc. (Wooden centering will not be
allowed)
a) For C.C.M-20
Cu.m.
6898.00
1429.00
b) For C.C.M-25
Cu.m.
7054.00
1462.00
22
SR.NO.
&
CODE
NO.
12
BDF
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour

by using Batching Plant, transit mixer &
concret pump of trap/ granite/quartzite/gneiss
metal for R.C.C slabs and landings as per
detailed design and drawings including steel
centering, plywood/steel formwork, steel
complete. (Excluding reinforcement &
and honey combed surface only. Newly laid
plastic, tarpaulin etc. (Wooden centering will
not be allowed)
a) For C.C.M-20
Cu.m.
6893.00
1442.00
b) For C.C.M-25
Cu.m.
7026.00
1474.00
a) For C.C.M-20
Cu.m.
6830.00
1025.00
b) For C.C.M-25
Cu.m.
6797.00
1025.00
FOR BEAMS & LINTLES
23
SR.NO.
&
CODE
NO.
13
BDF
13A
UNIT
Completed
Labour
Cu.m.
6954.00
1442.00
Cu.m.
7098.00
1474.00
a) For C.C.M-20
Cu.m.
7521.00
1164.00
b) For C.C.M-25
Spec No.: As directed by Engineer-in-charge.
Cu.m.
7687.00
1196.00

/gneiss metal for R.C.C. Waist slab, and
steps of staircases as per detailed design
and drawings or as directed including steel
centering, plywood/ steel formwork, steel
complete.
(Excluding
einforcement,
and honeycombed surface only. (Newly laid
plastic, tarpaulin etc.) (Wooden centering
a) For C.C.M-20
b) For C.C.M-25
Spec.No.:
(2000)
14
BDF
23, 24
RATES FOR 2014-15

(In Rs.)
Bd.F.13/Page
No.305/I.S.
456

of required grade of trap metal for RCC grid
beam with slab as per detailed design and
drawing with centering, plywood form work,
compacting, covering newly laid concrete by
gunny bag, plastic or tarpaulin, finishing the
formed surface with C.M. 1:3 of sufficient
minimum thickness to give smooth and even
surface or roughening them if special finish is
to be provided and curing (Excluding
reinforcement, including cover block)
complete. (Wooden planks shuttering will
not be allowed)
24
SR.NO.
&
CODE
NO.
15
BDF
14A
RATES FOR 2014-15

(In Rs.)
Completed
Labour
6559.00
6704.00
1164.00
1196.00
71.00
10.00

/gneiss metal for R.C.C.newel posts of
staircase as per detailed design and drawings
uneven and honeycombed surface with
C.M.1:3 of sufficient minimum thickness to
give a smooth and even surface or roughening
the surface if special finish is to be provided
and curing etc. complete. (Excluding
reinforcement, including cover block) The
only. (Newly laid concrete shall be covered
by gunny bag, plastic, tarpaulin etc.)
a) For C.C.M-20
b) For C.C.M-25
Spec.No.: Bd.F.14/Page
(2000)
16
UNIT
Cu.m.
Cu.m.
No.305/I.S.
456
Providing and fixing in position in R.C.C. slab

during laying rectangular 2 mm thick M.S.
Sheet iron box 180 mm x 100 mm and of
required depth with holes or notches as
required, bottom and top lids of 1.6 mm thick
M.S. sheet fixed with 3.5 mm dia round head
Screwed together with Fan dia.M.S. bar bent
to shape with hooked ends (for fan hooks) as
per standard design including painting to
exposed portion complete.
25
No.
SR.NO.
&
CODE
NO.
17
BDF
8B
18
BDF
11A
19
BDF
11
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Providing and Adding Melamine based

admixture to concrete to have water
reducing
air
entraining
plastisizier/superplastisizier property to comply
with I.S.9103/1979 at 1% of cement or as per
approved manufacturer's specifications.
a) Plasticizer
b) Superplasticizer
of required grade of trap / granite / gneiss /
quartzite metal for R.C.C. pardi 75 mm thick
including steel centering, plywood /steel
formwork, compaction, finishing uneven and
and even surface or roughening them if
special finish is to be provided and curing
etc.complete.(Excluding
reinforcement,
and honeycombed surface only.( Newly laid
plastic, tarpaulin etc.) (Wooden centering
Cu.m.
Cu.m.
164.00
210.00
4.00
4.00
a) For C.C.M-20
b) For C.C.M-25
Spec.No.: Bd.F.11/Page No.304/I.S. 456
(2000)
Providing and laying in situ M-20 Cement
concrete or trap / granite / quartzite / gneiss
metal for RCC work of walls including
scaffolding,
compaction,
finishing,
plywood/steel formwork, steel centering. The
C.M. 1:3 plaster is considered for rendering
uneven and honey combed surface only.
(Excluding reinforcement) Newly laid concrete
tarpaulin etc. (Wooden centering / formwork
will not be allowed).
Cu.m.
8916.00
1708.00
Cu.m.
9061.00
1740.00
Cu.m.
8024.00
2128.00
Spec.No.:
(2000)
Bd.F.11/Page
No.304/I.S.
26
456
SR.NO.
&
CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
20
BDF
17
Labour
Providing
and
fixing
in
position
reinforcement of various diameters for
R.C.C. pile caps, footings, foundations, slabs,
beams and columns, canopies, staircases,
newels, chajjas, lintels, pardies, coping, fins,
arches etc. as per detailed design and
drawings and schedules including cutting,
bending, hooking the bars, binding with wires
or tack welding and supporting as required
completed.
a) Mild steel
M.T. 58097.00
4594.00
b) For TMT / HYSD steel bars
M.T. 59601.00
4594.00
Spec.No.: Bd.F.17/Page No.306

21
BDF
19
Providing and fixing in position after hoisting,

precast 1:2 cement mortar reinforced jali
50 mm thick of approved design on both
sides fixing in cement mortar 1:3 and curing
complete. (with 3 mm diameter mild steel bar
reinforcement)
Sq.m.
429.00
93.00
Sq.m.
598.00
112.00
Spec.No.: Bd.F.20 / Page No.307

22
BDF
19A
Providing and fixing in position after hoisting,

precast 1:2 cement mortar reinforced jali
80 mm thick of approved design on both sides
fixing in cement mortar 1:3 and curing
complete.(with 3 mm diameter mild steel bar
reinforcement)
Spec.No.: Bd.F.20 / Page No.307
27
BD - G :
BRICK MASONARY
SR.NO.
&
CODE
NO.
1
BDG
1
Providing Fly ash lime brick masonry (bricks

conforming to I.S.12894 : 1990 of size 19 cm x
9 cm x 9 cm ) in cement mortar 1:6 in
foundations and plinth of inner walls / in
plinth of external walls including bailing out
water, striking joints on unexposed faces,
racking out joints on exposed faces and
watering complete.
Spec.No.: Bd.G.1/Page No.313
2
BDG
1
Providing 2nd class Burnt Brick masonry

with conventional/I.S. type bricks in cement
mortar 1:6 in foundations and plinth of
inner walls/in plinth of external walls including
bailing out water, striking joints on unexposed
faces, racking out joints on exposed faces and
watering complete.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Cu.m.
3549.00
545.00
Cu.m.
3413.00
545.00
Cu.m.
3604.00
589.00
Cu.m.
3467.00
589.00

3
BDG
5
Providing Fly ash lime Brick masonry (

Bricks conforming to I.S.12894 : 1990 and of
size 19 cm x 9 cm x 9 cm)in cement mortar
1:6 in super structure including striking
joints, racking out joints watering and
scaffolding complete.
4
BDG
5
Providing second class Burnt Brick

masonry with conventional/ I.S. type bricks in
cement mortar 1:6 in super structure
including striking joints, racking out joints
wateringand scaffolding complete.
28
SR.NO.
&
CODE
NO.
5
BDG
7
Providing Fly ash lime Brick masonry

(Bricks conforming to I.S. 12894:1990 and of
size19 cm x 9 cm x 9 cm ) bricks in cement
mortar 1:4 in half brick thick wall including
mild steel longitudinal reinforcement of 2 bars
of 6 mm.diameter/2 hoop iron strips 25 mm x
1.6 mm placed at every third course, properly
bent and bounded at ends scaffolding, racking
out joints and watering complete
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
579.00
107.00
Sq.m.
557.00
107.00
Sq.m.
507.00
110.00
Cu.m.
3488.00
702.00

6
BDG
7
Providing second class Burnt Brick

masonry with conventional / I.S. type bricks in
cement mortar 1:4 in half brick thick wall
including mild steel longitudinal reinforcement
of 2 bars of 6 mm. diameter/2 hoop iron strips
25 mm x 1.6 mm placed at every third course,
properly bent and bounded at ends
scaffolding, racking out joints and watering
complete.
7
BDG
8
Providing Burnt Brick - on - edge masonry

with second class bricks of conventional type
in cement mortar 1:3 including mild steel
longitudinal reinforcement of 2 bars of 6 mm
diameter / one strip hoop on 25 mm x 1.6 mm
placed at every third course, properly bent and
bounded at ends scaffolding, racking out joints
and watering complete.
8
BDG
10A
Providing Second class Burnt Brick

masonry with conventional/I.S. type bricks in
cement mortar 1:4 including scaffolding,
racking joints and watering in pillars of
rectangular or square shapes as shown in
the drawings.
29
SR.NO.
&
CODE
NO.
9
BDG
10B

masonry with conventional/I.S. type bricks in
cement mortar 1:4 including scaffolding,
racking joints and watering in pillars of
curved shape as shown in the drawings.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Cu.m.
3777.00
732.00
Cu.m.
3005.00
567.00
Cu.m.
7832.00
553.00

10
BDG
13

masonry coping of conventional/ I.S. type
bricks in C.M. 1:6 of rectangular chamfered or
other shape as per detailed drawings over
plinth, parapet wall including racking out
joints and watering complete.
11
BDG
20
Providing Brick work of fire bricks to the

shape and size as shown on drawing in fire
clay 1:5 proportion including scaffolding,
racking out joints pointing and curing
complete.
Spec.No.: Bd.G.20/Page No. 323
12
BDG
Providing and laying light weight clay

perforated bricks 100 mm x 200 mm x 400
mm in C.M. 1:6 including racking out joints,
when plastering is to be done/striking joints
when no plastering is to be done, curing and
scaffolding etc. complete. ( prior permission
of C.E. is required )
Cu.m.
1315.00
84.00
13
BDG

Cu.m.
1642.00
84.00
30
SR.NO.
&
CODE
NO.
14
BDG

31
UNIT
Cu.m.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
1770.00
84.00
BD - H :
SR.NO.
&
CODE
NO.
1
BDH
1
STONE MASONARY
Providing uncoursed rubble masonry of

trap/granite/quartzite/gneiss stones in cement
mortar 1:6 in foundations and plinth of
inner walls / in plinth of external walls including
bailing out water, striking joints on unexposed
faces and watering complete.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Cu.m.
1393.00
342.00
Cu.m.
1561.00
386.00
Spec.No.: Bd.H.1/Page No.329

2
BDH
4
Providing uncoursed rubble masonry of

trap/granite/quartzite/gneiss stones in cement
mortar 1:6 in super structure including
racking out joints when plastering is to be
done/striking joints when no plastering is to be
done watering and scaffolding.
3
BHS
14
Providing coursed rubble masonry 1st sort

of trap / granite / quartzite / gneiss stones in
C.M. 1:6 in super structure including racking
out joints on the inside when plastering is to
be done watering and scaffolding etc.
complete.
Cu.m.
1717.00
589.00
4
BDH
12
Providing coursed rubble masonry 2nd sort

of trap / granite / quartzite / gneiss stones in
C.M. 1:6 in super structure including racking
out joints where plastering is to be done and
striking joints when no plastering is to be done
on the inside, watering scaffolding etc.
complete. ( To be executed with prior
permission of S.E.)
Cu.m.
1651.00
567.00
Cu.m.
2044.00
723.00

5
BDH
40
Providing coursed rubble masonry 1st sort

for pillars of trap / granite / quartzite / gneiss
stones in C.M.1:6 including pointing with
C.M.1:3 scaffolding and watering etc.
complete. (To be executed with prior
permission of S.E.)
Spec.No. : Bd.H. 40/Page No. 345
32
BD - I : BLOCK MASONARY
SR.NO.
& CODE
NO.
1
BDI
1
UNIT
Providing and laying I.S. standard C.C. Sq.m.

hollow block 100 mm x 200 mm x 400 mm
(100 mm thick) in C.M. 1:6 including racking
out joints, when plastering is to be
done/striking joints when no plastering is to be
done, curing and scaffolding etc. complete.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
392.00
173.00
804.00
261.00
Spec.No.: Bd.I.1/Page No.349
2
BDI
2
Providing and laying I.S. standard C.C.hollow Sq.m.

block 200 mm x 200 mm x 400 mm (200 mm
thick) in C.M. 1:6 for super structure
including racking out joints, when plastering is
to be done/striking joints when no plastering is
to be done curing and scaffolding etc.
complete.
Spec.No.: Bd.I.1/Page No.349
33
BD - J : WATER PROOFING
SR.NO.
&
CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed Labour
1
BDJ
2
Providing and laying damp proof course 50 mm thick in Sq.m.

(1:2:4)/ M-15 cement concrete layer and bitumen felt
using cement with water proofing compound etc.
complete.
273.00
60.00
477.00
107.00
3305.00
1220.00
Spec.No.: Bd.J.2/Page No.355

2
BDJ
7
Providing cement based water proofing treatment to Sq.m.

terrance (Indian water proofing or alike) with brick
bats laid in required slope to drain the water for any
span after cleaning the base surface. Applying a coat of
cement slurry admixed with approved water proofing
compound and laying the brick bats on bottom layer in
C.M.1:5 admixed with approved water proofing
compound filling up to half depth of brick bats, curing
this layer for 3 days, applying cement slurry over this
layer joints of brick bats with C.M.1:3 admixed with
approved water proofing compound and finally top
finishing with average 20 mm. thick layers of same
mortar added with jute fiber at 1 Kg per bag including
finishing the surface smooth with cement slurry admixed
with approved water proofing compound. Marking
finished surface with false squares of 300mm x 300 mm.
making the junctions at the parapet rounded and tapered
top for required height, with drip mould at the junction of
plaster and parapet and curing and covering 10 years
Guarantee against leakproofness on Court fee stamp
paper of Rs. 100/- including ponding test etc.
complete.
3
BDJ
9
Providing water proofing in W.C. and bath including Cu.m.

B.B. Coba in all position consisting of specialised
approved waterproofing compound and materials as per
manufacturers specifications and covering 10 years
guarantee on court fee stamp paper of Rs.100/including all lead, lift and ponding test etc. complete.
34
SR.NO.
&
CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed Labour
Providing water proof bedding for flooring of Bath and Sq.m.

WC 25 mm thick in C.M. 1:3 including using approved
water proofing compound in specified proportion as per
manufacturers specifications for per bag of cement
including leveling, curing and covering 10 years
guarantee on court fee stamp paper of Rs.100/including ponding test etc. complete.
213.00
79.00
504.00
116.00

5
Providing and laying Hyperplas standard or equivalent Sq.m.

polymeric multiple monolithic five layer water
proofing flexible, pliable and high tensile strength
membrane (3 kg/sqm) & consist of centre core of 90
micron thick High Molecular High density Polyethylene
film (HMHDPE) which is protected on both the side with
polymeric mix. Applying the membrane by thermofusing
to roof & parapet after applying thin film of hot blown
bitumen 85/25 or 90/15 grade @ 1.2 kg/sqm maximum
as per surface condition or Hyperplas primer @ 250
gms/sqm as per site condition on the surface to be
treated with 10 cm overlapping including finishing etc.
complete and covering guarantee of 10 years on stamp
paper of Rs. 100/- and as directed by Engineer-incharge. (Prior permission of S.E.in writing is
necessary before inclusion of this item in estimate).
35
SR.NO.
&
CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed Labour
Providing and laying Hyperplas Aluminum or Sq.m.

equivalent polymeric multiple monolithic five layer
water proofing flexible, pliable and high tensile
strength membrane (3 kg/sqm) which is comprise of
top with "V" shape embossed 40 micron Aluminum foil to
bear thermal expansion and avoiding delamination &
consist of centre core of 90 micron thick High Molecular
High density Polyethylene film (HMHDPE) which is
protected on both the side with polymeric mix. Applying
the membrane by thermofusing to roof & parapet after
applying thin film of hot blown bitumen 85/25 or 90/15
grade @ 1.2 kg/sqm maximum as per surface condition
or Hyperplas primer @ 250 gms/sqm as per site
condition on the surface to be treated with 10 cm
overlapping including finishing etc. complete and
covering guarantee of 10 years on stamp paper of Rs.
100/- and as directed by Engineer-in-charge. (Prior
permission of S.E.in writing is necessary before
inclusion of this item in estimate).
625.00
167.00
243.00
107.00
Spec.No.: As directed by Engineer in charge.
Providing and laying mechanical protective layer over Sq.m.

water proofing membrane with cement screed
plaster 1:5 after laying chicken mesh over membrane
including curing etc. complete 20 mm thick with cost of
chicken mesh etc. complete and covering 10 years
guarantee on court stamp paper of Rs.100/- including
necessary testing specified by Engineer (Prior
permission of S.E. is necessary before inclusion of
this item in estimate)
(Note :- This item shall be executed over item no. 5 of
BD-J Water Proofing)
36
SR.NO.
&
CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed Labour
Providing Water proofing treatment to newly laid fully Sq.m.

cured concrete slab of terraces by applying first coat of
polymer modified semi-viscous paste prepared by mixing
polymer of approved make (such as Aquatek conchem/
Master Seal 550/ brush bond / RoffSupercrete /
Webercrete / Monobond /Perma shield / Hypercrate /
Master Crete M 81) and Cement in 1 : 2 proportion ( 1
litre polymer : 2 Kg. Cement) or Rohnex water proofing
system in two coats(1kg powder,700 ml water and
polymer jelly for first coat & 1 kg powder,500 ml water &
polymer jelly for second coat )to a neatly cleaned and
dust free concrete surface and upto 300 mm. over
parapet wall prepared by removing loose and deposited
material with brush and water, laying glass fibre mesh of
10 x 10 specification of approved make over tacky
surface of first coat of polymer followed by second coat
in transverse direction, sprinkling coarse sand over it,
followed by protective mechanical cover of 40 mm to 75
mm. thick cement concrete of 1:2:3 proportion using
coarse aggregate of 10 MSA and water proofing
compound of approved make and polypropylene fibres
@ 125 gm per bag of cement within it confirming to IS, in
pannels of 3m/4m oras per site condition & filling the
joints with polt sulphide sealant(0.08 kg per sq.mt.) after
curing
including providing holler with drip moulds at the junction

and finishing the concrete surface with neat cement
slurry,polypropylene fibres @ 125 gm per bag of cement
within it confirming to IS, in pannels of 3m/4m oras per
site condition & filling the joints with polt sulphide
sealant(0.08 kg per sq.mt.) after curing including
providing holler with drip moulds at the junction and
finishing the concrete surface with neat cement
slurry,incuding curing as directed and ponding the
surface as directed etc.complete ; covering 10 years
guarantee against leakproofness on court Fee stamp
paper of Rs 100/(Note : for slanting length upto. 5.0 m )
37
1029.00
207.00
SR.NO.
&
CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed Labour
Providing Water proofing treatment to old terraces by Sq.m.

removing existing treatment, sealing of cracks by non
shrink crack fill compound applying first coat of polymer
modified semi-viscous paste prepared by mixing polymer
of approved make (such as Aquatek conchem/ Master
Seal 550/ brush bond/ RoffSupercrete / Webercrete /
Monobond / Perma shield / Hypercrate / Master Crete M
81) and Cement in 1 : 2 proportion (1 litre polymer : 2 Kg
Cement )or Rohnex water proofing system in two
coats(1kg powder,700 ml water and polymer jelly for first
coat & 1 kg powder,500 ml water & polymer jelly for
second coat) to a neatly cleaned and dust free concrete
surface and upto 300 mm over parapet wall prepared by
removing loose and deposited material with brush and
water, followed by two coat of flexible cementious
coating eg. MYK-Aqufine U.M., Monopal G. coat or
equivalent as per manufacture specification after laying
glass fibre mesh of 10 x 10 specification of approved
make over tacky surface of first coat of polymer followed
by second coat in transverse direction, sprinkling coarse
sand over it, followed by protective mechanical cover of
40 mm to 75 mm. thick cement concrete of 1:2:3
proportion using coarse aggregate of 10 MSA and water
proofing compound of approved make along with 14
guage 40 mm x 40 mm size welded mesh and
polypropylene fibres @ 125 gm per bag of cement within
it conforming to IS in
pannels of 3m/4m oras per site condition & filling the
joints with polt sulphide sealant(0.08 kg per sq.mt.) after
curing, including providing holler with drip moulds at the
junction and finishing theconcrete surface with neat
cement slurry including curing as directed and ponding
the surface as directed etc. complete; covering 10 years
guarantee against leakproofness on Court Fee Stamp
Paper of Rs. 100/(Note : for slanting length upto 5.0 m)
(Excluding grouting and Removing existing
treatment to be paid separately as required)
Spec. No. As directed by Engineer-incharge and as per
manufacturers specifications.
38
1103.00
244.00
SR.NO.
&
CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed Labour
10
Providing water proofing treatment to newly laid fully Sq.m.

cured concrete slab of terraces by applying first coat of
polymer modified semi - viscous paste prepared by
mixing polymer of approved make (such as Aquatek
conchem/ Master Seal 550 / brush bond/ RoffSupercrete
/Webercrete /Monobond / Perma shield / Hypercrate /
Master Crete M 81) and Cement in 1:2 proportion (1 litre
polymer : 2 Kg Cement)or Rohnex water proofing
polymer jelly for second coat) to a neatly cleaned and
dust free concrete surface and upto 300 mm over
in transverse direction, laying mechanical protective
cover to polymer coating treatment with brick bat coba
with burnt broken brick bats laid in C.M. 1:5 admixed
with approved water proofing compound filling up to half
depth of brick bats, curing this layer for 3 days, applying
cement slurry over this layer, joints of Brick Bats with
C.M. 1:3 admixed with approved water proofing
compound and finally top finishing with average 20mm
thick layer of same mortar added with polypropylene
fibers at 125 gm per bag of cement including finishing
the surface smooth with neat
cement slurry admixed with approved water proofing
compond, Marking finished surface by false squares of
300 mm x 300 mm, Making the junctions at the
parapet rounded and tapered top for required height,
with drip mould at the junction of plaster and prapet and
curing and covering 10 years Guarantee against
leakproofness on court fee stamp paper Rs. 100/including ponding test etc. complete
( Note :- For Slanting length more than 5.0 m)
39
965.00
167.00
SR.NO.
&
CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed Labour
11
Providing water proofing treatment of Old Terraces by Sq.m.

removing existing treatment. Sealing of cracks by non
shrink cracks fill compound by applying first coat of
polymer modified semi-viscous paste prepared by mixing
polymer of approved make (such as Aquatek conchem/
Master Seal 550/ brush bond / RoffSupercrete/
Webercrete/ Monobond / Perma shield / Hypercrate /
Master Crete M 81) and Cement in 1:2 proportion ( 1 litre
polymer : 2 Kg Cement)or Rohnex water proofing
polymer jelly for second coat) to a neatly cleaned and
dust free concrete surface and upto 300 mm over
in transverse direction, laying mechanical protective
cover to polymer coating treatment with brick bat coba
with burnt broken brick bats laid in C.M. 1:5 admixed
with approved water proofing compound, filling up to half
depth of brick bats, curing this layer for 3 days, applying
cement slurry over this layer joints of brick bats with
C.M. 1:3 admixed with approved water
proofing
compound and finally top finishing with average 20 mm
thick layers of same mortar added with polypropylene
fibres at 125 gm per
bag of cement including finishing the surface smooth
with cement slurry admixed with approved water proofing
compound, Marking finished surface by flase squares
of 300 mm x 300 mm making thejunctions at the
parapet rounded and tapered top for required height,
with drip mould at the junction of plaster and parapet and
curing and covering 10 years Guarantee against
leakproofness on court fee stamp paper of Rs. 100/including ponding test etc. complete
(Excluding grouting and Removing existing
treatment to be paid separately as required)
( Note :- For Slanting length more than 5 m)
40
1002.00
202.00
SR.NO.
&
CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed Labour
12
Providing water proofing treatment to Bath & W.C. sunk Sq.m.

by applying first coat of polymer modified semi-viscous
paste prepared by applying grouting with cement slurry
admixed with non shrink grout additives as per
manufacturers specifications, mixing polymer of
approved make (such as Aquatek conchem/ Master Seal
550/
brushbond/
RoffSupercrete/
Webercrete/
Monobond / Perma shield / Hypercrate / Master Crete M
81) and cement in 1:2 proportion (1 litre polymer : 2 Kg
Cement)or Rohnex water proofing system in two
coats(1kg powder,700 ml water and polymer jelly for first
coat & 1 kg powder,500 ml water & polymer jelly for
second coat to a netly cleaned and dust free concrete
surface prepared by removing looseand deposited
in transverse direction, sprinkling coarse sand over it
followed by protective mechanical cover of 15 to 20 mm
thick polymer modifiedplaster to coated surface of sunk
@ 2 litre per bag of cement and filling joints with non
shrink compound and covering 10 years guarantee
against leakproofness on court fee stamp paper of Rs.
100/(excluding Brick Bat Coba and plaster
below flooring )
41
1103.00
328.00
BD - J-1 : REPAIRS & REHABILITATION

SR.NO.
&
CODE
NO.
UNIT
Providing and applying water proofing treatment Sq.m.

to vertical surface of brick and R.C.C. wall,
elevated and overhead R.C.C./ brick water
tanks and sumpwell etc. in all directions by using
standard acrylic copolymer coating of Roff
Hyguard, Monopol 456, Dr. Fixit Pidilite 2K or
equivalent in two coats including cleaning the
surface by wire brush, washing and drying
including covering gurantee of 10 years on court
stamp paper of Rs. 100/-, and as directed by
Engineer in charge etc. complete.
(Prior permission of S.E.in writing is necessary
before inclusion of item in estimate).
RATES FOR 2014-15

(In Rs.)
Completed
Labour
654.00
134.00
294.00
79.00
Providing Grouting by specially prepared grout

of Weber crete / Roff Supercrete / Polyalk WP /
Monobond /Perma shield / Hypercrate or
equivalent with cement in proportion 1 : 3.5 (1
part chemical & 3.5 part cement by weight) along
with 50 ml super plasticizer Roff Plast 320 / sun
polycrete NCT/perma plast/ supercon 100 or non
shrinking non cracking antiwash high strength
polymer cement grout PC grout available in bags
or equivalent with proper water for injectable
consistency and applying it in the body of structure
like slab, beam, column, pillars , deckslab,
retaining wall, basement, underground & elevated
water storage reservoir concrete & brick wall,
crack portion of structure etc. by injecting method,
to achieve its original strength including drilling of
suitable diameter drills holes at 2 to 4 Nos. per
sqm using caps & nozzle grouting machinery
necessary, scaffolding, finishing & covering
guarantee of 10 years on court stamp paper of Rs.
100/- & necessary testing etc. complete. (Prior
permission of S.E.in writing is necessary
before inclusion of item in estimate).
42
Kg.
SR.NO.
&
CODE
NO.
UNIT
Providing & applying polymer modified plaster of Sq.m.

20mm thick in C.M. 1:3 and adding polymer such
as Webercrete, Roff Supercrete , Monobond
,Perma shield , Hypercrate, , Dr. Fixit Powercrete
at 6.00 litres in 1 bag of Cement and polyprolen
fibers @ 125 gm Polymer powder superscreed or
equivalent @ 3.3 kg / per bag of cement to
damaged structural concrete members by
removing chipping out loose concrete,cleaning
surface by wire etc including curing with covering
guarantee on court stamp paper of Rs. 100 /guarantee. (Prior permission of S.E.in writing
is necessary before inclusion of item in
estimate).
43
RATES FOR 2014-15

(In Rs.)
Completed
Labour
959.00
98.00
BD - K : EXPANSION JOINTS
SR.NO.
&
CODE
NO.
1
BDK
1A
UNIT
Providing expansion joints in R.C.C. framed

structure (interior column) with plain
premoulded filler 25mm thick including fixing
T.W. battens both faces and finishing etc.
complete as directed.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
1554.00
143.00
Sq.m.
2099.00
178.00
Sq.m.
2567.00
268.00
Sq.m.
3875.00
455.00
Spec.No.: Bd.K.1/Page No.359

2
BDK
1B

structure (exterior columns) with plain
premoulded filler 25 mm thick and 3 mm thick
aluminium plate, hold fast, fixing T.W. battens
on internal face, finishing etc. complete as
directed.
3
BDK
1C

structure (at floor level) with premoulded
filler 25mm thick and 3 mm thick aluminium
plate as required, bitumen poured filler and
fixing T.W. battens on rear faces etc.
complete as directed.
4
BDK
1D

structure (at terrace level) with premoulded
filler 25 mm thick and 3 mm thick aluminium
plate as required, bituminous poured filler,
fixing lead, flushing on upper side and T.W.
battens and inner face finishing etc. complete
as directed.
44
BD - L : PLASTERING AND POINTING

SR.NO.
&
CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
1
BDL
1A
Providing internal cement plaster 6 mm Sq.m

thick in a single coat in cement mortar 1:3
to concrete surface in all positions including
scaffolding and curing. Providing groove at
joint of B.B.Masonry and concrete members
complete.
Spec.No.: Bd.L.1/Page No.367
101.00
34.00
2
BDL
2

to concrete or brick surface in all positions
including scaffolding and curing complete.
Providing groove at joint of B.B. Masonry and
concrete members complete.
124.00
63.00
3
BDL
2A

including scaffolding and curing complete.
Providing groove at joint of B.B.Masonry and
concrete members complete.
129.00
62.00

4
BDL
2B

including scaffolding and curing. Providing
groove at joint of B.B.Masonry and concrete
members complete.
140.00
59.00
5
BDL
3
Providing internal cement plaster 20mm Sq.m

to stone masonry surfaces in all positions
groove at joint of stone masonry and concrete
members complete.
203.00
76.00
45
SR.NO.
&
CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
6
BDL
4

to concrete, brick surfaces in all positions
members complete.
204.00
77.00
7
BDL
4A

members complete.
214.00
76.00
8
BDL
4B

members complete.
221.00
78.00
9
BDL
5

thick in single coat in cement mortar 1:4 to
concrete, brick, stone surfaces in all positions
groove at joint of B.B. Masonry and concrete
members complete.
Spec.No.: Bd.L.5/Page No. 368
254.00
81.00
10
BDL
7
Providing sand faced plaster for external Sq.m.

portion in cement mortar using Kharsalia /
Kasaba or similar type of sand, in all positions
including base coat of 15 mm. Thick in C.M.
1:4 using water proofing compound at
1 kg
per cement bag, curing the same for not less
than 3 days and keeping the surface of the
base coat rough to receive the sand faced
treatment 6 to 8 mm thick in C.M. 1:4 finishing
the surface by taking out grains, making
grooves and curing for fourteen days
scaffolding etc. complete.
Spec.No.: Bd.L.7/Page NO.369
305.00
104.00
46
SR.NO.
&
CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
11
Providing rough cast cement plaster for Sq.m.

external portion in two coats to concrete,
brick or stone masonry surfaces in all
positions with base coat of 12 to 15 mm thick
in C.M. 1:4 and rough cast treatment 12 mm
thick in proportion 1:3 including scaffolding ,
making grooves and fourteen days curing
complete.
Spec.No. Bd.L.8/page No. 370
312.00
105.00
12
BDL
9
Providing rough cast cement plaster Sq.m.

externally in two coats with coloured cement
finish to concrete / brick / stone masonry
surfaces in all positions with base coat 12 to
15 mm thick in C.M. 1:4 using gray cement
and rough cast treatment 12 mm thick in
proportion of 1 : 1.5 : 3 using coloured
pigment including scaffolding, making grooves
and fourteen days curing etc. complete.
324.00
109.00
451.00
176.00
497.00
459.00
218.00
218.00

13
BDL
11
Providing exterior stonecrete facing of Sq.m.

approved colour and dressing with base coat
of 12 to 15mm thick in cement mortar 1:3
using water proofing compound at 1kg/bag to
brick or stone masonry or concrete surfaces in
all positions including final coat of stonecrete
facing of required thickness but not less than
12mm thick in proportion 1:3 using gray
cement and colour pigment scaffolding and
fourteen days curing complete. (Prior written
permission of S.E. should be taken before
inclusion of item in estimate.)
14
Providing and applying granular textured

finish 1.5mm thick to old / new surfaces in
decorative finish in approved colour and shade
as directed by engineer-in-charge including
scrapping preparing the surface scaffolding
etc. complete.
Sq.m.
a) By trawel
Sq.m.
b) By Roller spring
47
SR.NO.
&
CODE
NO.
15
UNIT
Providing and applying synthetic plaster 2.00 Sq.m.

to 2.5 mm thick to new cement plaster
surface in proper line level and finishing in
various shades as directed by engineer
incharge including cleaning, scrapping of
surface etc. complete. The item includes 2
coats of synthetic acrylilc coating scratch
plaster and 2 coats of textured paint.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
653.00
322.00
938.00
432.00
16
Providing and applying external Stonecrete

Plaster 8 to 10 mm thick in one coat of
approved colour and shade, over base coat of
8 to 12 mm thick rough cement plaster in C.M.
1:4, in ratio 1 : 1 : 2.5 [ 1 part Birla White
Cement, 1 part Dolomite / Calcite / Marble
powder and 2.5 part quartz sand /Marble chips
(Zero No.)] using water proofing compound.
(Impermo Snowcem make or equivalent) @
2% by weight of white cement and adding
synthetic inorganic colour pigments as per
desired shade, to brick or concrete surfaces in
all positions, making grooves, chiseling to give
Ashlar Stone Finish, Washing and cleaning
the surface, applying water repellent (Perma
make or equivalent)including scaffolding,
curing etc. complete.
48
Sqm
SR.NO.
&
CODE
NO.
17
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sqm
810.00
262.00
Providing and applying spray plaster in C.M. Sq.m.

1:3 made with finely graded sand in two coat,
each of 2 mm thick using putty- knife or trowel
to newly plastered or fairly even surface after
minimum 30 days gap in all position including
finishing the surface using `0' number sand
paper or fine emery paper and bringing to
required level and surface by moving paper in
round circle rubbing dust and cleaning the
surface with dry cloth and scaffolding including
all material and labour etc. complete.
201.00
56.00
7.00
7.00
Providing and applying stone grit wash

plaster on exterior walls in two layers, under
layer 12 mm thick cement plaster in c.m. 1:4 in
gray cement, furrowing the under layer with
scratching tools, applying white cement slurry
on the under layer @2kg. / per sqm. top layer
15 mm cement plaster in proportion 1: : 2
(Birla white cement : coarse sand : 2 stone
chipping 10mm nominal size) in panels with
grooves all around as per approved pattern
including scrubbing and washing the top layer
with brushes and water to expose the stone
chipping, including, scaffolding, curing etc.
complete.
18
19
Providing groove to required size at specified

location as directed by Engineer, at junction of
brick masonry wall and R.C.C beams or
Column, at junction of composite masonry,
including scaffolding, finishing, curing etc.
complete.
Spec.No. : As directed by Engineer- in-charge
49
Rmt.
SR.NO.
&
CODE
NO.
20
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Rmt.
a) 50 mm wide
Rmt.
b) 100 mm wide
Rmt.
c) 150 mm wide
Spec.No. : As directed by Engineer- in-charge.
28.00
18.00
36.00
24.00
43.00
29.00
Providing patta on concrete/ plastered surface

12 mm to 15 mm thick in C.M.1:3 in line, level,
including drip mould if necessary, scaffolding,
finishing, curing etc. complete.
21
Providing and fixing chicken mesh of 22

gauge, with about 30 cm. width at the junction
of R.C.C members and brick work, of
approved quality including fixing mesh in
position by necessary drilling in concrete
or/B.B.masonry and or tying by binding wire
etc. complete.
Rmt.
52.00
13.00
22
Providing cement paste 2.50 cm on either

side of edges of plaster for doors &
windows including scaffolding ,finishing,
curing etc. complete.
Rmt
14.00
10.00
23
Providing and fixing glass fiber mesh Alkali

resistance, 50 gsm, 10 x 10 about 30 cm.
width at the junction of R.C.C members and
brick work, of approved quality including
applying bond coat of acrylic polymer &
cement by brush in 1:1 proportation, fixing
mesh over it, tying by nails & binding wire etc.
complete.
Rmt.
55.00
50
``
Specifications for Stone Grit Wash Plaster
1)
The base plaster shall be 8 to 12 mm thick in c.m. 1 : 4 in gray cement

and should be sufficiently rough and combed by wire brush or nail
comb, freed from all dust, dirt, grease, oil etc. for proper bonding.
2)
The base plaster should be cured for 3 to 4 days before applying the
Grit Wash Plaster.
3)
A homogeneous mix of white cement, coarse sand and 10 mm nominal

size stone chippings of approved colour in proportion 1 : : 2 be
prepared.
4)
Water proofing compound be added to the mix @ 2 % by weight of

cement and be mixed homogeneously and mix then be applied on a
prepared base surface with a float applying gentle pressure. White
cement slurry shall be applied @ 2 kg/sqm. On base coat before
applying a stone grit wash plaster.
5)
After the initial setting of about 1 to 2 hours the surface of stone Grit
plaster surface be scrubbed and washed out gently with a nylon brush
and water. The cement on the surface of stone chips be washed away
exposing the aggregates.
6)
The plastered surface shall be cured for 14 days.
Specification for Stone Crete plaster.

1)
The base plaster shall be 8 to 12 mm thick in cm. 1:4, in gray cement

and should be sufficient rough and combed by wire brush or a nail
comb, freed from all dust, dirt, grease oil etc. for proper bonding.
2)
The base plaster should be cured for 3 to 4 days before applying a

Stonecrete plaster.
3)
A dry homogeneous mix of white cement and marble powder in

proportion 1:1 be prepared.
4)
Synthetic inorganic pigments be added to the above mix & be mixed

homogeneously in order to get the desired shade.
5)
Water proofing compound be added to the above mix @ 2 % by weight

of white cement.
6)
1 part of marble chips (zero no. - passing through 2.36 mm & retained
on 600 mic. I.S. Sieve) or quartz sand be added to 1 part of above mix
and be mixed homogeneously.
51
7)
``
The above mix be prepared in dry condition and potable water be added
to the dry mix in such a quantity as to get a mortar having stiff
consistancy and this mortar be applied on the prepared base surface.
White cement slurry be applied @ 2 kg/sqm. On base coat before
applying a stonecrete plaster.
8)
After initial setting of 1 to 2 hours the grooves can be cut as per the
required size and design of the panel with a sharp steel strip.
9)
After 2 to 3 days of curing, the Ashlar Stone Finish can be obtained by

chiseling the surface with a chisel and a hammer.
10)
If desired, an uneven pattern can be obtained on the plaster surface by

hammering with the help of rough rubber sheet just after the groove
cutting.
11)
The surface shall be curved again for 2 - 3 days.
12)
The surface be cleaned by wire brush and wash out all dust, dirt etc. for
good texture.
13)
After complete drying, apply Silicone coating or water repellent with the
help of a brush or a spray.
52
BD - M : PAVING, FLOORING AND DADO

SR.NO.
& CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Providing and laying hand cut polished kota

stone Flooring 20 mm to 25 mm thick plain
pattern on a bed of C.M. 1:6 including cement
float, filling joints with neat cement slurry,
curing rubbing, polishing and cleaning
complete
Spec.No.: Bd.M.3/Page No.380
Sq.m.
764.00
112.00
2
BDM
3B
Providing and laying hand cut polished kota

stone Flooring 20 mm to 25 mm thick
diamond pattern on a bed of C.M. 1:6
including cement float, filling joints with neat
cement slurry, curing rubbing, polishing and
cleaning complete
Sq.m.
814.00
124.00
3
BDM
5B
Providing and fixing in required position

skirting or dado of polished Kota stone
slabs 20 mm to 25 mm thick and required
width after making the wall portion to required
level with C.M.1:4 and fixing tiles with ready
made adhesive including cement float, filling
joints with cement slurry, curing rubbing,
polishing and cleaning complete.
Sq.m.
845.00
133.00
Sq.m.
219.00
90.00

4
BDM
7
Providing and laying cement concrete

flooring 40 mm thick with 1:2:4 cement
concrete laid to proper level and slope in
alternate bays, including compacting, PVC/
Glass/Aluminum strips at joints, marking lines
to give appearance of tiles of 30 cm x 30 cm
or other size laid diagonally/square etc.
finishing smooth(with extra cement) in any
colour as directed and curing complete.
Spec.No. : Bd. M. 7/Page No. 383
53
SR.NO.
& CODE
NO.
5
BDM
6A
Providing and laying cement concrete

flooring 50 mm thick with 1:2:4 cement
concrete laid to proper level and slope in
alternate bays, including compacting, PVC/
Glass/Aluminum strips at joints, marking lines
to give appearance of tiles of 30 cm x 30 cm
or other size laid diagonally/square etc.
finishing smooth (with extra cement) in any
colour as directed and curing complete.
a) With Iron filings and flakes in flooring
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
268.00
90.00
Sq.m.
278.00
99.00

6
BDM
8
Providing and laying flooring of plain cement

tiles of size 25cm x 25 cm and 20 mm thick
on bed of 1:6 cement mortar including neat
cement float, joints with neat cement slurry,
curing, polishing and cleaning without
border/with border /with pattern cement tiles of
gray colour.
Spec.No.:Bd.M.8/Page No.383
Sq.m.
328.00
82.00
7
BDM
9
Providing and fixing plain cement tiles of size

25 cm x 25 cm and 20 mm thick for dado and
skirting in required position after making the
wall portion to required level with C.M.1:4 and
fixing tiles with ready made adhesive including
filling joints with neat cement slurry, curing,
rubbing, polishing and cleaning complete.
Sq.m.
363.00
94.00
Sq.m.
338.00
82.00

8
BDM
10
Providing and laying plain coloured cement

tiles of size 25 cm x 25 cm and 20mm thick
approved shade of blue/green/red colour/
other than these colours for flooring in
required position on a bed of C.M. 1:6
including neat cement float, filling joints with
neat cement slurry mixed with approved shade
of pigment to match the colour of tiles, curing
and machine polishing complete without
border/with border and/or a pattern of
coloured tiles.
54
SR.NO.
& CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
373.00
94.00
10
BDM
12A
Providing and laying coloured glazed tiles of Sq.m.

all sizes and minimum thickness of 5 to 6
mm for flooring in required position laid on
bed of C.M.1:6 including neat cement float
(including all specials required like round
edge tiles, corner cups etc.) filling joints with
neat white cement slurry curing and cleaning
complete.
745.00
120.00
11
BDM
13A
Providing and fixing coloured glazed tiles of

all sizes and minimum thickness of 5 to 6
mm for dado and skirting in required
positions after making the wall portion to
required level with C.M.1:4 and fixing tiles with
ready made adhesive excluding all specials
required like round corner tiles, angles,
cups etc. filling joints with white cement
slurry, cleaning, curing complete.
Sq.m.
781.00
145.00
Sq.m.
926.00
254.00
9
BDM
11
Providing and fixing plain coloured cement

tiles of approved shade of blue/green/red
coloured/other than these colours for dado
and skirting in required position on plaster
after making the wall portion to required level
with C.M.1:4 and fixing tiles with ready made
adhesive including filling joints with neat
cement slurry mixed with approved shade of
pigment to match the colour of tiles, curing,
rubbing and polishing complete.

12
BDM
44
Providing and Laying ceramic tiles of

approved quality , required size and 5 to 6 mm
thickness for flooring in required position laid
on bed of C.M.1:4 including cement float,
filling joint with white / colour cement slurry,
cleaning, curing, complete.
55
SR.NO.
& CODE
NO.
13
BDM
44
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Providing and Laying jointless ceramic tiles

of approved quality , required size and 5 to 6
mm thickness for flooring in required
position laid on bed of C.M.1:4 including
cement float, filling joint with white / colour
cement slurry, cleaning, curing, complete.
A) Ceramic tiles of size 300 x 300 mm
Sq.m.
813.00
254.00
B) Ceramic tiles of size 400 x 400 mm
Sq.m.
910.00
254.00
Sq.m.
963.00
288.00
A) ceramic tiles of size 300 x 300 mm
Sq.m.
856.00
288.00
B) ceramic tiles of size 400 x 400 mm
Sq.m.
952.00
288.00
14
BDM
45A
Providing and fixing ceramic tiles of approved

quality , required size and 5 to 6 mm thickness
for dado and skirting in required position
with ready made adhesive mortar of approved
quality in required position after making the
wall portion in level in plaster of C.M. 1:4
including joint filling with white/colour cement
slurry cleaning curing complete.
15
BDM
45A
Providing and fixing jointless ceramic tiles of

approved quality , required size and thickness
for dado and skirting in required position
with ready made adhesive mortar of approved
quality in required position after making the
wall portion in level in plaster of C.M. 1:4
including joint filling with white/colour cement
slurry cleaning curing complete.
56
SR.NO.
& CODE
NO.
16
BDM
16
UNIT
Completed
Labour
Sq.m.
2521.00
327.00
Sq.m.
1927.00
327.00
Sq.m.
2558.00
345.00
Sq.m.
1965.00
345.00
a) For flooring
Sq.m.
3189.00
327.00
b) For dado and skirting
Sq.m.
3226.00
345.00
Providing and laying marble slabs or

equivalent of size 60 cm x 45 cm and 15 to
18 mm thick of approved quality vein and
colour with machine polished surface for
flooring in required pattern on bed of C.M. 1:6
including neat white/ coloured slurry, curing
polishing, cleaning complete.
a) White makrana marble
b) Marble other than white
marble
17
BDM
17
makrana
Providing and fixing marble slabs or

equivalent of size 60 cm x 45 cm and 15 to
18 mm thick of approved quality vein and
colour with machine polished surface for dado
and skirting after making the required portion
in level, in cement plaster 1:4 and fixing the
slabs with ready made adhesive including
filling joints with neat approved coloured
slurry, curing polishing, cleaning complete.
a) White makrana marble
marble
18
RATES FOR 2014-15

(In Rs.)
makrana
Providing and fixing granite of best quality of

approved colour and feature 15 to 18 mm
thick in required position with ready made
adhesive mortar of approved quality including
joint filling with coloured cement slurry
cleaning, curing etc. complete . (Prior
permission of S.E. is to be obtained before
inclusion of this item in the estimate)
Spec.No.: As directed by Engineer- in-charge
57
SR.NO.
& CODE
NO.
19
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Providing and fixing in position Partition of

polished Kaddappa / Marble / Granite stone
of required thickness ,including making
groove in wall / concrete surface filling joints
with slurry, curing, polishing, rounding edges,
as required cleaning etc. complete.
A ) One Side Polished
a) Kadappa Partition 25 mm to 30 mm thick
Sq.m.
626.00
205.00
b) Marble(other than makrana) Partition 15 to 18

mm thick
Sq.m.
2044.00
205.00
c) Granite Partition 15 to 18 mm thick
Sq.m.
3055.00
220.00
Sq.m.
781.00
306.00
Sq.m.
2199.00
301.00
Sq.m.
3209.00
316.00
Sq.m.
455.00
129.00
Providing and laying polished Kota Stone Sq.m.

slabs 20mm to 25 mm thick for treads and
risers of steps and staircases, with rounded
nosing and groove at edge for the treads, on a
bed of C.M. 1:4 including cement float filling
joints with neat cement slurry, curing, polishing
and cleaning complete.
871.00
194.00
B ) Both Side Polished

a) Kadappa Partition 25 mm to 30 mm thick
b) Marble(other than makrana) Partition 15 to 18
mm thick
c) Granite Partition 15 to 18 mm thick
20
Providing and fixing P.V.C./ Synthetic tiles

with ready made adhesive including cleaning
surface before laying, etc. complete.
21
BDM
22B
58
SR.NO.
& CODE
NO.
22
BDM
23
Providing and laying plain cement tiles for

treads and risers of steps and staircases
with nosing of treads moulded as per
drawings or as directed on a bed of C.M. 1:4
including cement float filling joints with neat
cement slurry, curing, polishing and cleaning
complete.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
400.00
120.00
Sq.m.
416.00
120.00
Sq.m.
2069.00
405.00
Sq.m.
785.00
128.00

23
BDM
24
Providing and laying plain coloured cement

tiles of approved shade of blue/green/red
colour or other than these colour for treads
and risers of steps and staircases with
nosing of the treads molded as per drawings
or as directed, on a bed of C.M. 1:4 including
cement float, filling joints with neat coloured
cement slurry to match the colour of the tiles,
curing, polishing and cleaning complete.
Spec.No.: Bd.M.24/Page No. 390
24
BDM
26
Providing and laying marble slabs or

equivalent 15 to 18 mm thick of approved
quality, vein and colour with machine polished
surface, for steps of stair cases on a bed of
C.M. 1:4 including rounded nosing for the
treads neat cement float, filling joints with
coloured cement slurry to match the colour of
slabs, curing, polishing, cleaning complete.
a) Marble other than white makrana marble
25
BDM
29B
Providing sills of polished Kota stone 20mm

to 25mm thick, on a bed of cement mortar 1:4
including cement float, filling joints with slurry,
curing, polishing, rounding edges, cleaning
complete.
59
SR.NO.
& CODE
NO.
26
BDM
29C
UNIT
Providing sills of polished Kaddappa stone

20mm to 25mm thick, on a bed of cement
mortar 1:4 including cement float, filling joints
cleaning complete.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
598.00
126.00
Sq.m.
1989.00
356.00
Sq.m.
3273.00
368.00
Sq.M.
383.00
118.00
Sq.M.
360.00
120.00

marble
c) Granite
27
BDM
33A
makrana
Providing and laying 25 mm. thick precast

polished chequered cement tiles for treads
of size 20 cm. x 32 cm. and 20 mm. Thick
plain cement tiles for risers of steps and
staircase with nosing of treads moulded as per
drawing or as directed on a bed of 1:4 cement
mortar in required positions including cement
float filling joints with neat cement slurry,
curing, polishing and cleaning complete.
Spec. No. Bd.M.33(a) Page No. 392
28
BDM
33A
Providing and laying 25mm thick precast

polished chequered cement tiles 25 cm x
25 cm x 20 mm thick of approved colour and
pattern with white and coloured marble chips
upto maximum size 6mm for flooring in
required position set on bed of C.M. 1:6
including neat cement float, filling joints with
neat coloured cement slurry, curing polishing
and rubbing complete.
Spec. No. Bd.M.33(a) Page No. 392
60
SR.NO.
& CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
29
Providing and laying granite of best quality

16 to 20 mm thick for treads and risers of
steps and staircases, with rounded nosing
and groove at edge for the treads on a bed of
C.M. 1:4 including cement float filling joints
with net cement slurry, curing, polishing, and
cleaning complete
Spec. No. As directed by Engineer in charge.
Sq.m
3379.00
189.00
30
BDM
33B
Providing and laying 25 mm. Thick precast

polished chequered coloured cement tiles
and pattern for treads of size 20 cm. x 32cm.
And 20 mm. Thick plain cement tiles for
risers of steps and staircase with nosing of
treads moulded as per drawing or as directed
on a bed of 1:4 cement mortar in required
positions including neat cement float filling
joints with neat cement slurry mixed with
approved shades of pigment to match the
colour of the tiles, curing, polishing and
cleaning complete.
Sq.m.
351.00
118.00
Sq.m.
370.00
120.00
Sq.m.
48.00
17.00
Spec. No. : Bd.M.33(b) Page No. 392

31
BDM
33B
Providing and laying 25mm thick precast

polished chequered coloured cement tiles
25 cm x 25 cm x 20 mm thick of approved
colour and pattern with white and coloured
marble chips upto maximum size 6mm for
flooring in required position set on bed of
C.M. 1:6 including neat cement float, filling
joints with neat coloured cement slurry, curing
polishing and rubbing complete.
Spec. No. : Bd.M.33(b) Page No. 392
32
BDM
36
Providing 15 cm thick murum flooring

including watering, ramming, finishing smooth
and applying two coats of cow dung wash
complete.
Spec.No.: Bd.M.36(B)/Page No.394
61
SR.NO.
& CODE
NO.
33
BDM
43
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m
625.00
121.00
Providing BRICK-ON-EDGE paving with IInd

class I.S./conventional type burnt bricks in
cement mortar 1:4 including sand cushion, flat
brick bedding, pointing with cement mortar 1:3
and curing complete.
Sq.m.
412.00
118.00
a) ------ do ------- Fly Ash Brick paving

Spec.No.: Bd.M.40/Page No. 396
Sq.m.
380.00
118.00
Providing Mirror Polish to New/old Marble

/Kota / granite stone flooring /dado by
polishing machine using superior polishing
stone of 0 to 6 no.of Suri Company and
equivalent and applying superior quality of
polishing material including necessary labour
and cleaning the srface etc. complete.
Sq.m.
139.00
96.00
a) 600 mm x 600 mm. size
Sq.m.
1284.00
304.00
b) 1000 mm x 1000 mm. size
Sq.m.
1626.00
304.00
Providing and fixing black Kadappa stone

steps, 25 mm thick machine polished, cutting
rounding corners, groove on edges laying in
position jointing with neat cement slurry on
cement mortar bedding in cement mortar 1:4
proportion curing etc. complete.
34
BDM
49
35
Note:-item to be executed with the prior

permission from Superintending Engineer.
36
Providing and Laying vetrified tiles of double

charged of approved make and quality of
required size and thickness for flooring in
required position laid on bed of C.M.1:4
including cement float, filling joint with white /
colour cement slurry, cleaning, curing,
complete.
62
SR.NO.
& CODE
NO.
37
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
Sq.m.
1330.00
1677.00
293.00
329.00
Sq.m.
626.00
207.00
Sq.m.
2044.00
207.00
sqm.
3071.00
207.00
a) Half moulding
Rmt.
64.00
45.00
b) Fullmoulding
Rmt.
96.00
68.00
Providing and fixing vetrified tiles of double

charged approved make and quality of
required size for dado and skirting in
required position with ready made adhesive
mortar of approved quality in required position
after making the wall portion in level in plaster
of C.M. 1:4 including joint filling with
white/colour cement slurry cleaning curing
complete.
a) 600 mm x 600 mm. size
b) 1000 mm x 1000 mm. size
38
Providing and fixing in position Shelves of

polished Kaddappa / Marble / Granite stone
of required thickness ,including making
groove in wall / concrete surface filling joints
as required cleaning etc. complete.
a) Kadappa shelves 25 mm to 30 mm thick
b) Marble other than white marble
shelves 15 to 18 mm thick
c) Granite shelves 15 to 18 mm thick
39
Providing moulding to granite / Marble / Kota

stone including polishing, rounding edges, as
required cleaning etc. complete.
63
SR.NO.
& CODE
NO.
40
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Providing and fixing Exterior grade fabricated

fiber reinforced heavy duty cement concrete
tiles of approved colour and design, 22 2
mm thick, Bayer colour pigmented as per
IS:1237-1980 reaffirmed in 2006, having
2
compressive strength more than 500 kg/cm
like
Ultra
tiles
or
equivalent,
in
plain/designed pattern on a bed of 1:6 cement
mortor including cement float, filling joints with
neat cement slurry, curing etc. complete
a) For flooring
Sq.m.
883.00
179.00
b) For dado and skirting
Sq.m.
910.00
192.00
c) For steps
Sq.m.
926.00
192.00
Sq.m.
963.00
398.00
41
Providing and fixing 60mm thick factory made

Hydraulically pressed Mechanically vibrated
and compacted precast inter locking cement
concrete paving blocks in M-40 grade of
approved size and shape as specified 50 mm in
gray cement and top surface 10 mm in white
cement with coloured pigment including cost of all
materials, manufacturing, curing, transportation of
blocks to work site including loading, unloading
and stacking as directed, laying paving blocks in
position over prepared bed of sand of 50 mm
thickness including necessary excavation in all
stratas, spreading blindge of fine sand over the
prepared bed, compacting blocks by plate vibrator
etc. complete. (Prior permission of Chief
Engineer in writing is necessary before
execution of item of paving block as per
Govt.Resolution No. CAT- 10/11/ case no.
360/Building, Mantralaya Mumbai, Dated
09/12/2011. )
64
BD - N :
SR.NO.
& CODE
NO.
WOOD FINISH
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
1
BDN
11A
Providing and applying boiled linseed oil in

one coat including knotting, preparing the
surface, scaffolding etc. complete as directed.
Labour
Sq.M.
15.00
9.00
Sq.M.
22.00
11.00
Spec. No.:Bd.N.1.1/Page No.399

2
BDN
11 B
Providing and applying boiled linseed oil in

two coats to the new wood work including
knotting, preparing the surface, scaffolding
etc. complete as directed.
Spec. No.: Bd.N.1.1/Page No 399
3
BDN
12 B
Providing and applying Wax polishing to the

old wood work including knotting, preparing
the surface, scaffolding etc. complete as
directed.
Spec. No.: Bd.N.1.2/Page No.399
Sq.M.
20.00
12.00
4
BDN
13A
Providing and applying french polishing for

required finish on wood previously
polished surface including knotting, preparing
the surface, scaffolding etc. complete as
directed.
Sq.M.
44.00
21.00
5
BDN
14A
Providing and applying varnish in one coat

on previously varnished wood work
including
knotting,
preparing
the
surface,scrapping, scaffolding etc. complete.
Sq.M.
19.00
11.00
Sq.M.
13.00
6.00

6
BDN
16A
Providing and applying coal tar in one coat

on previously painted wood including
preparing the surface, scaffolding etc.
complete.
Spec.No.: Bd.N.1.6/Page No.400
65
SR.NO.
& CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
7
BDN
16B
Labour
Sq.M.
21.00
10.00
Sq.M.
47.00
18.00
Sq.M.
20.00
15.00
Providing and applying Melamine polish of

required glossy / mat finish to wood work by
spray machine including knotting and
preparing the surface by scrapping, applying,
polishing, scaffolding, if required etc.
complete.
a)On New Surface
Sq.M.
229.00
99.00
b)For previously polished Surface
Sq.M.
102.00
39.00
Providing and applying coal tar in two coats

on new wood work including preparing the
surface, scaffolding etc. complete.
Spec.No.: Bd.N.1.6/Page No.400
8
BDR
20
Providing and applying two coats of bitumen

to roof on new dungree cloth, one coat on
each side etc. complete as directed.
9
BDR
21
Providing and applying one coats of bitumen

to roof (without cloth) including scaffolding
etc. complete as directed.
10
66
BD - O : OIL PAINTING
SR.NO.
& CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
1
BDO
1
Providing and applying two coats of Sq.m.

lead/zinc base oil paint of approved colour
and shade to new wood work and fibre
boards including preparing the surface,
knotting, scaffolding if necessary, including
primer coat complete. (Sample and brand is
to be got approved from Ex.Engineer
before use)
Spec.No.: Bd.O.1/Page No.403
47.00
18.00
2
BDO
1A
Providing and applying three coats of Sq.m.

and shade to new wood work and fibre
boards including preparing the surface,
knotting, scaffolding if necessary including
before use)
58.00
22.00
26.00
11.00

3
BDO
2
Providing and applying one coat of lead/zinc Sq.m.

base oil paint of approved colour and shade
to old wood work previously painted and
fibre boards including preparing the surface,
if necessary scaffolding, including primer coat
complete. (Sample and brand is to be got
approved from Ex. Engineer before use)
67
SR.NO.
& CODE
NO.
4
BDO
2A
UNIT

and shade to old wood work and fibre
boards previously painted including preparing
the surface, if necessary scaffolding, including
before use)
RATES FOR 2014-15

(In Rs.)
Completed
Labour
38.00
18.00
48.00
26.00
45.00
18.00
55.00
26.00

5
BDO
2B
Providing and applying three coats of lead / Sq.m.

zinc base of oil paint of approved colour and
shade on old wood work previously painted
and fibre boards, including preparing the
surface, if necessary scaffolding including
primer coat etc. complete.(Sample and brand
is to be got approved from Ex. Engineer
before use)
6
BDO
3
Providing and applying two coats of lead / Sq.m.

zinc base oilpaint of approved colour to new
structural steel work and iron work in
buildings including scaffolding if necessary,
cleaning and preparing the surface including
primer coat etc. complete. (Sample and
brand is to be got approved from Ex.
Engineer before use)
7
BDO
3A

to new structural steel work and iron work
in buildings, including scaffolding, if
necessary cleaning and preparing the surface
excluding primer coat complete. (Sample and
68
SR.NO.
& CODE
NO.
8
BDO
4
UNIT
Providing and applying one coat of Sq.m.

aluminum paint of approved make to new
structural steel work in building and
workshop including, scaffolding if necessary,
cleaning and preparing surface including
to be got approved from Ex. Engineer
before use)
RATES FOR 2014-15

(In Rs.)
Completed
Labour
52.00
11.00
66.00
18.00
77.00
24.00

9
BDO
4A

structural steel work in building and
workshops including scaffolding if necessary,
before use)
10
BDO
4B

structural steel work in buildings and
workshops including scaffolding if necessary,
before use)
69
SR.NO.
& CODE
NO.
11
BDO
5
UNIT

synthetic enamel paint of approved colour to
new structural steel work and wood work
in buildings, including scaffolding if
necessary, cleaning and preparing the surface
including primer coat complete. (Sample and
RATES FOR 2014-15

(In Rs.)
Completed
Labour
59.00
18.00
50.00
21.00
74.00
24.00
40.00
12.00

12

old structural steel work and wood work in
buildings including scaffolding if necessary,
before use)
13
BDO
5A

new and old structural steel work and
wood
work
in
buildings,
including
scaffolding if necessary, cleaning and
preparing the surface (including primer coat)
complete. (Sample and brand is to be got
14
BDO
6
Providing and applying one coat of flat oil Sq.m.

paint of approved colour to the old structural
steel work and iron work previously
painted in building including scaffolding, if
necessary, cleaning and preparing surface
70
SR.NO.
& CODE
NO.
15
BDO
6A
UNIT
Providing and applying two coats of flat oil Sq.m.

painted in building including scaffolding, if
necessary, cleaning and preparing the surface
RATES FOR 2014-15

(In Rs.)
Completed
Labour
56.00
18.00
77.00
22.00
38.00
11.00

16
BDO
6B
Providing and applying three coats of flat oil Sq.m.

painted in building scaffolding, if necessary,
before use)
Spec.No.: Bd. O. 6/Page No. 406
17
BDO
7
Providing and applying one coat of flat oil Sq.m.

paint of approved colour and shade to
internal/External
plastered
surfaces
including scaffolding if necessary, cleaning
and preparing the surface including primer
coat complete. (Sample and brand is to be
got approved from Ex. Engineer before
use)
71
SR.NO.
& CODE
NO.
18
BDO
7A
UNIT

internal / External plastered new surfaces
coat complete.(Sample and brand is to be
got approved from Ex.Engineer before use)
RATES FOR 2014-15

(In Rs.)
Completed
Labour
58.00
15.00
53.00
18.00
74.00
22.00

19
BDO
7A

internal/External plastered old surfaces
coat complete. (Sample and brand is to be
got approved from Ex. Engineer before
use)
20
BDO
7B
Providing and applying three coats of flat oil Sq.m.

internal/
External
plastered
old/new
surfaces including scaffolding if necessary,
before use)
72
SR.NO.
& CODE
NO.
21
BDO
8
UNIT
Providing and applying two coats of water Sq.m.

proof cement paint of approved manufacture
and of approved colour to new plastered
cleaning and preparing the surface, watering
for two days complete. (Sample and brand is
before use)
RATES FOR 2014-15

(In Rs.)
Completed
Labour
39.00
17.00
38.00
16.00
50.00
21.00

22
Providing and applying two coats of water Sq.m.

and of approved colour to old plastered
before use)
23
BDO
8A
Providing and applying three coats of water Sq.m.

and of approved colour to new plastered
before use)
73
SR.NO.
& CODE
NO.
24
BDO
8A
UNIT
Providing and applying three coats of water Sq.m.

and of approved colour to old plastered
before use)
RATES FOR 2014-15

(In Rs.)
Completed
Labour
49.00
21.00
23.00
9.00
17.00
9.00

25
BDO
8C
Providing and applying priming coat over Sq.m.

new wood and wood based surfaces,
including preparing the surfaces by thoroughly
cleaning oil, grease, dirt and other foreign
matter,
sand
papering
and knotting,
scaffolding etc. complete. (Sample and brand
before use)
26
BDO
8D
Providing and applying priming coat over Sq.m.

new steel and other metal surfaces
including preparing the surface by thoroughly
cleaning oil, grease, dirt and other foreign
matter and scoured with wire brushes, fine
steel wool, scrappers and sand paper,
is to be got approved from Ex.Engineer
before use)
74
SR.NO.
& CODE
NO.
27
BDO
8E
UNIT
Providing and applying priming coat on Sq.m.

concrete/masonry/
Asbestos
Cement
/plastered surfaces including scaffolding if
necessary, preparing the surface by
thoroughly cleaning oil, grease, dirt and other
foreign matter and sand papering as required.
(Sample and brand is to be got approved
from Ex. Engineer before use)
RATES FOR 2014-15

(In Rs.)
Completed
Labour
23.00
10.00
14.00
10.00
88.00
38.00

28
BDO
8F
Providing and applying one coat of seal Sq.m.

cement primer of approved manufacture and
shade including scaffolding preparing the
surface by cleaning dirt and other foreign
matters, scrapping if necessary including
before use)
Spec.No. : As directed by Engineer-in-charge.
29
Providing and applying exterior emulsion

water based water proof cement paint of
approved colour and shade to exterior old/new
surface in two coats including scaffolding
preparing the surface to receive paint etc.
complete
75
Sqm
BD - P : COLOUR/WHITE WASHING , DISTEMPERING

SR.NO.
& CODE
NO.
1
BDP
7D
UNIT
Providing and applying primer coat for wall Sq.m.

surface to receive oil bound distemper
treatment.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
12.00
5.00
2
BDP
1
Providing and applying whitewash in one Sq.m.

coat on old / new plastered or masonry
surfaces and asbestos cement sheets
including scaffolding and preparing the
surface by brushing and brooming down
complete.
Spec.No.: Bd.P.1/Page No.411
7.00
5.00
3
BDP
1A
Providing and applying whitewash in two Sq.m.

coats on old / new plastered or masonry
surfaces and asbestos cement sheets
including scaffolding and preparing the
complete.
10.00
6.00
10.00
5.00
12.00
6.00

4
BDP
2
Providing and applying colourwash of Sq.m.

approved colour and shade in one coat to
new surface including scaffolding and
preparing the surface by brushing and
brooming down (including base coat of white
wash) etc. complete.
5
BDP
2A

approved colour and shade in two coats to
76
SR.NO.
& CODE
NO.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
6
BDP
2B

approved colour and shade in three coats to
14.00
7.00
7
BDP
3

approved colour and shade in one coat to old
surfaces which are to be recoloured including
scaffolding and preparing the surfaces by
brushing and brooming down (including base
coat of white wash) etc. complete.
10.00
6.00

8
BDP
3A

approved colour and shade in two coats to
old surfaces which are to be recoloured
including scaffolding preparing the surface by
brushing and brooming down (including base
coat of white wash) etc. complete.
11.00
6.00
9
BDP
3A

approved colour and shade in three coats to
old surfaces which are to be recoloured
including scaffolding, and preparing the
(including base coat of white wash) etc.
complete.
12.00
7.00
10
BDP
5
Providing and applying washable oil bound

distemper of approved colour and shade to
surfaces in one coat including scaffolding,
preparing the surfaces (excluding the primer
coat) complete.
18.00
20.00
7.00
7.00
Sq.m.
Sq.m.
a) For old surface

b) For New surface
77
SR.NO.
& CODE
NO.
11
BDP
5A
12
BDP
6
Labour
28.00
41.00
10.00
11.00
Sq.m.
Sq.m.
56.00
80.00
17.00
17.00
Sq.m.
Sq.m.
70.00
88.00
18.00
18.00
Extra for washing and cleaning of decorated Sq.m.

wall surfaces with soap, soda and water.
2.00
2.00
66.00
40.00
Providing and applying washable oil bound

distemper of approved colour and shade to
surfaces in two coats including scaffolding,
preparing the surfaces (excluding the primer
coat) complete.
Sq.m.
a) For old surface
Sq.m.
b) For New surface
Providing and applying plastic emulsion
paint of approved quality, colour and shade to
surfaces in two coats including scaffolding
and preparing the surfaces (including the
primer coat) complete.
Providing and applying washable Acrylic

emulsion paint of approved colour and shade to
surface in two coats including scaffolding,
preparing the surface to receive paint etc.
complete.
a) For old surface

b) For New surface
14
BDP
7B
RATES FOR 2014-15

(In Rs.)
Completed
a) For old surface

b) For New surface
13
BDP
7E
UNIT
15
Providing and applying putty to old / new

plastered surfaces in two coats to receive
approved paint in all positions including all
materials,labour scaffolding and curing etc.
complete.
78
Sqm
BD - Q : WOOD WORK
SR.NO.
& CODE
NO.
1
BDQ
24A
Providing and fixing in position P.V.C. hand

rail of approved quality, make and shade
including M.S. plate of required size as
directed etc. complete. (50 mm size)
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Rmt.
315.00
49.00
Sq.m.
1254.00
472.00
Sq.m.
887.00
325.00

2
Providing and fixing double leaf steel shutter

with frame to wall cupboard of 18 gauge
M.S.sheet as per standard drawing including
oxidised fixtures and fastenings with locking
arrangment including G.I.Sheet shelves at
40 cm center to center including primer coat
and three coats of enamel paint of approved
colour and pattern finishing fixing in position
complete.
Providing and fixing double leaf steel shutter

with frame to wall cupboard of 18 gauge
M.S.sheet as per standard drawing including
oxidised fixtures and fastenings with locking
arrangement excluding shelves, including
primer coat and three coats of enamel paint of
approved colour and pattern, finishing fixing in
position complete.
79
SR.NO.
& CODE
NO.
Providing and fixing 12.5 mm. Thick

GYPSUM board (conforming be I.S.20931982) panelling on plastered/unplastered
brick block/concrete walls, Gypboard screw
fixed with dry wall screw 25 mm. at 300 mm.
Centres to perimeter channels of size 27 mm.,
0.5 mm. thick having one flange of 20 mm.
and another flange of 30 mm. alongwith
ceiling sections of 0.55 mm. Thickness having
knurled wedge of 51.5 mm. and 2 flanges of
26 mm. at 610 mm.c/c. pads with Dab fixer
placed at appropriate distances at top and
bottom under the ceiling section including
good quality of approved sundry materials and
finishing smooth including filling and finishing
with jointing compound and paper tape and
two coats of primer etc. complete upto the
satisfaction of Engineer- in-charge. ( Prior
approval shall be obtained from S.E. before
inclusion of this item)
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
694.00
336.00

5
BDQ
5
Providing and fixing country teak wood

common rafters, purlins and purlins cleats, hip
rafters, jack rafters, ridges, wall plates, post
plates and posts for roofing etc. including
scaffolding if necessary all iron work and one
coat of primer complete.
Spec.No.: Bd.Q.5/Page No.423
Cu.m.
88327.00
9850.00
6
BDQ
5A
Providing and fixing jungle wood common

rafters, purlins, and purlins cleats, hip rafters,
jack rafters, ridges, wall plates, post plates
and posts for roofing for weather shed etc.
including scaffolding if necessary, all iron work
painted with one coat of primer complete.
Cu.m.
39249.00
7482.00
80
SR.NO.
& CODE
NO.
7
BDQ
22
Providing and fixing jungle wood ballies of

approved species 85 mm average dia. for
common rafters, purlins, ridges, hip and valley
rafters, jack rafters, wall plates, post plates,
posts etc. including all iron work scaffolding if
necessary and oiling in one coat complete.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Rmt.
97.00
17.00

8
BDQ
23
Providing and fixing 100 mm dia. Country

teak wood ballies for post truss of 6.00 m.
span as per drawing or as directed by
Engineer- in-charge including all iron work,
scaffolding if necessary and oiling complete.
Spec.No.:Bd.Q.22/Page No.434
Rmt.
144.00
21.00
9
BDQ
8
Providing and constructing superior indian

teak wood hand rail of 60 mm x 70 mm as
per detailed drawings or as directed by the
Engineer, including french polishing complete.
Rmt.
704.00
177.00
Rmt.
205.00
45.00
Sq.m.
1209.00
394.00
Sq.m.
1642.00
749.00

10
BDQ
24
Providing and fixing in position PVC hand rail

of approved quality, make and shade
excluding M.S. Plate as directed complete.
11
BDQ
13
Providing and fixing shelf of 25 mm thick

black board 30cm wide with C.T.W. Wood
brackets of 45 x 35 mm at 1.2m C/C without
filletes including primer coat complete.
12
BDQ
11
Providing and fixing 20 mm thick superior

veneer board pelmet box 150 to 200 mm
wide to doors or window frames including
20mm dia. Aluminium curtain rod with sockets
and finishing with french polishing (without
top) complete.
81
SR.NO.
& CODE
NO.
13
BDQ
11A
Providing and fixing 20 mm thick Laminated

sheet board pelmet box 150 to 200mm wide
to doors or window frames including 20 mm
dia. Aluminium curtain rod with sockets and
finishing with french polishing (without top)
complete.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
2067.00
749.00
Sq.m.
1731.00
245.00

14
Providing and fixing single/double leaf PVC

shutter with frame to wall cupboard of
approved colour made out of extruded rigid
PVC hollow section DWUF-306 shutter frame
of size 33 mm x 47 mm having double wall
construction as vertical styles,and top,bottom
rail of required size and the panel in fill SPUF101 multichamber hollow plastic section of
size 20 mm x 200 mm joined each other by
tongue and groove interlocking system duly
inserted in shutter frame and all shutter
frames, lock rails, styles reinforced by
seasoned wood inserted inside for fixing of
hinges, aldrops and other required fixtures etc.
all corners should be machine cut, joined
each other by metal screw after inserting rigid
"L" bracket PVC reinforcement of size 125 mm
x 200 mm including synthetic metal fixtures
and fastenings, remaking damaged surface
etc. complete.
82
SR.NO.
& CODE
NO.
15
Providing and fixing shutter to wall

cupboards in two leaves as per detailed
drawing including outer frame in C.T.W. of
size 75 x 25 mm, shutter frame C.T.W. 50 mm
x 25 mm and panels of one side laminated 12
mm thick plywood , shelves of 90 mm thick of
marine plywood supported on teak wood
battens of size 20 mm x 40 mm including
neccessary stainless mat finish curtain rod
and finishing with one coat of primer and two
coats of oil painting etc. complete.
83
UNIT
Sq.m
RATES FOR 2014-15

(In Rs.)
Completed
Labour
2714.00
573.00
BD - R : ROOFING AND CEILING

SR.NO.
& CODE
NO.
1
BDR
5(a)
Completed
Labour
Sq.m
Sq.m
785.00
877.00
71.00
71.00
Rmt.
Rmt.
692.00
774.00
62.00
63.00
Sq.m.
405.00
65.00
Sq.m.
405.00
65.00
Providing and fixing G.I.Sheets over the

ridge, hip or valley for galvanised
corrugated iron sheet roofing including
fastening with galvanised iron screws and
bolts and lead and bitumen washers, including
filling gaps by C.M.1:3 etc.complete.
a) For 22 B.W.G.
b) For 20 B.W.G.
Spec.No.: Bd.R.6/Page No.452
3
BDR
7
RATES FOR 2014-15

(In Rs.)
Providing and fixing corrugated galvanised

iron sheets for roofing with wind ties
including fastening with galvanised iron screw
and bolts and lead and bitumen washers as
per drawing complete.
a) For 22 B.W.G.
b) For 20 B.W.G.
2
BDR
6
UNIT
Providing and fixing 6 mm thick Asbestos

Cement semi corrugated (Big size) sheet
roofing including galvanised iron J and L hook
bolts, galvanised iron and bituminous G.I.
washers, galvanised iron clamps and bolts
and nuts and scaffolding etc. complete.
4
BDR
8
Providing and fixing 6 mm thick Asbestos

Cement Semi Corrugated/ Trafford sheet
roofing including galvanised iron J and L hook
bolts, galvanised iron and bituminous
washers,galvanised iron clamps, bolts and
nuts and scaffolding etc. complete.
84
SR.NO.
& CODE
NO.
5
BDR
9
Providing and fixing 6mm thick Asbestos

Cement ridge capping for roofing including
galvanised iron hooks, bolts, galvanised iron
and bituminous washers, galvanised iron
clamps, bolts and nuts including scaffolding
etc. complete.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Rmt.
292.00
57.00
Rmt.
Rmt.
2115.00
2262.00
135.00
135.00
Rmt.
Rmt.
1657.00
1711.00
99.00
99.00
No.
66.00
15.00

6
BDR
10
7
BDR
10A
Providing and fixing valley gutter of plain

galvanised iron sheets 120 cm. wide with
brackets of 20 x 20 x 2.5 mm angles including
two coats of coal tarring the upper surface of
plank (excluding painting to under side of
plank) complete.
a) For 22 B.W.G.
b) For 20 B.W.G.
Providing and fixing valley gutter of plain
galvanised iron sheets 90 cm wide with 20 x
20 x 2.5 mm angles placed @ 90 cm C/C
including painting of angle, drilling holes
placing in position etc. (excluding painting to
under side of plank) complete.
Spec.No.: Bd.R.10/ Page No.455
a) For 22 B.W.G.
b) For 20 B.W.G.
8
BDR
14
Providing and fixing Asbestos cement cowl

ventilators in asbestos cement sheet
roofing at the required places, including all
accessories and scaffolding necessary
complete.
85
SR.NO.
& CODE
NO.
9
BDR
16
Providing and fixing false ceiling of plain

asbestos cement sheets 4mm thick with
country teak wood beading of 45 x 12 mm with
frame work of country teak wood battens of
size 70 x 60 mm at 1.20 m centre to centre
including scaffolding, if necessary, all iron
work and painting the visible surfaces of A.C.
sheet and beading with two coats of approved
oil paint complete. (excluding T.W. runner, to
be paid separately).
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
929.00
104.00
Sq.m.
1057.00
116.00
Sq.m.
1026.00
134.00

10
BDR
17
Providing and fixing false ceiling of T.W.

particle board half perforated sheet 12 mm
thick with frame work of country teak wood
battens of size 70 x 45 mm and 35 x 35 mm at
60 cm Centre to Centre including scaffolding,if
necessary, all iron work and painting the
visible surfaces of boards and beading with
two coats of approved paint etc. complete.
(excluding runner to be paid separately)
Spec.No.:Bd.R.17/Page No.461
11
BDR
18
Providing and fixing false ceiling of 15 to 20

mm thick decorative boards of fibrous
plaster of paris including scaffolding,if
necessary, frame work of countryteak wood
battens of 70 x 45 mm and 35 x 35 mm at 45
cm Centre to Centre without beading, all
architectural work like moulding, cornices,
eaves, domes, cups as per detailed drawings
and painting the visible surfaces with three
coats of approved oil paint and painting the
wood work with one coat of approved oil paint
complete. (Excluding runner and mild steel
suspenders)
Spec.No.: Bd.R.18/Page No. 461
86
SR.NO.
& CODE
NO.
12
BDR
19
Providing and fixing false ceiling of 12mm

thick acoustic boards of approved make,
with shapes and sizes as per drawings
including scaffolding, frame work of country
teak wood battens of size 70 x 45 mm and 35
x 35 mm at 60 cm centre to centre, all screws
and fastenings and finishing complete.
( runner to be paid separately).
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
1404.00
134.00
Sq.m.
1361.00
66.00
Rmt.
254.00
68.00
Rmt.
1559.00
134.00
No.
70.00
27.00

13
BDR
33
Providing and fixing skylight in R.C.C. roof

including M.S. frame with all accessories and
required fixtures and fastening fitting etc.
complete.
14
BDR
36
Providing and fixing asbestos cement (60cm

x 15cm x 23cm) valley gutters of approved
size and make including drop ends, stop ends
necessary fixtures and fastening the same as
per code of standard practise complete.

15
BDR
37
Providing and fixing valley gutters of 24

B.W.G. G.I. sheet 120cm with 20mm thick
country cut teak wood planking underneath
coal tarring etc. complete.
16
BDR
38
Providing and fixing 12 mm dia. Mild steel

bar upto 0.5 M. length for anchor rods with
necessary threading nuts and bolts etc.
complete.
87
SR.NO.
& CODE
NO.
17
BDR
39
Providing and fixing 16 mm dia. mild steel

bars upto 0.5 M. length for anchor rods with
necessary threading nuts and bolts etc.
complete.
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
82.00
29.00
Sq.m.
1102.00
178.00
Sq.m.
Sq.m.
585.00
616.00
81.00
81.00
No.

18
BDR
45
Supplying and fixing and laying in Grid

UNILOCK FALSE CEILING SYSTEM, size of
the Grid 610 mm x 610 mm of which main
runner shall be aluminium silver anodised 25
micron bulb "T" (U-202) of size 35 x 23.5 x 1.5
mm suspended at 1200 mm centre to centre
with 6 mm M.S.Hanger rod with ends
connected with G.I. clamps and adjustable
G.I.J. hooks, cross "T" shall be aluminium
silver anodised 5 micron (U-404) of size 23.5 x
23.5 x 1.5 mm fixed to wall with dash through
screws. The finished grid shall contain 9.5 mm
Gypsum board with coated ceiling tiles with
two coats of roller finish top coat complete.
(Prior permission of S.E to be obtained
before inclusion of item in estimate)

19
Providing and fixing 2mm thick fibre glass

reinforced plastic
transparent
sheet
matching with coloured asbestos profile /
G.I. profile roofing including galvanised "J"
and T hooks, bolts galvanised iron and
bituminous washer, galvanised iron clamps
and bolts nuts and scaffolding complete.
a) White Sheet
b) Coloured Sheet
88
SR.NO.
& CODE
NO.
20
Providing and fixing suspended white/colour

decorative ceiling of gypsum board which
includes G.I. Perimeter channel ( MF6) of
size 0.40 mm thick ( having one flange of 20
mm and another flange of 30 mm and web of
27 mm) along with perimeter of ceiling, screw
fixed to brick wall / partition with the help of
nylon sleeves and screws at 610 mm centers.
Thereafter suspending G.I. intermediate
channel
( MF 7) 600 mm. C/C of size
45mm (0.9 mm thick with two flanges of 15
mm each) from the soffit at 450 mm centre
with connecting angle (ie ceiling angle) of
width 25mm x 10mm x 0.40mm thick fixed to
soffit with G.I.cleat and teel expansion
fasteners. Celling sections ( MF 5 ) of 0.55
mm thickness having knurled web of 51.5
mm and two flanges of 26 mm each with lips
of 10.5 mm are then fixed to the intermediate
channel with the help of connecting clip and in
direction perpendicular to the intermediate
channel at 450 mm centers. 12.5 mm edge
Gyp board tapered
(conforming to IS 2095 - 1982) is then screw
fixed to celling section with dry wall screws
at 230 mm centers. Screw fixing is to be done
mechanically with suitable attachment. The
boards are to be joined and finished so as to
have flush look which includes filling and
finishing the tappered & square edges of the
boards with jointing compound, joint paper
tape and appropriate suitable primer and three
coats of plastic acrylic paint. The item includes
for light fitting, grill diffuseres and cut out etc.
have to be made with frame of perimeter
channels
of
size
20mm
x
30mm
x0.55mm.thick supported suitable and angle
bead is to be used at steps to get straight line
finish etc. complete.
89
UNIT
Sq.m.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
1081.00
439.00
SR.NO.
& CODE
NO.
21
UNIT
Providing and fixing and laying in grid unilock

false ceiling system size of grid 610 mm x
610 mm of which G.I. wall channel shall be of
size 0.5 mm thick 20 mm x 30 mm flanges and
web of 27 mm along the perimeter of wall
where ceiling meets the wall fixed to wall using
nylon sleeves and screw at 610 mm centres
suspended G.I. main runner size 45 x 0.9 mm
thick with 15 mm flanges from trusses at 900
mm centres using ceiling angle size 25 x 10 x
0.5 mm, nut bolt clip connected @ 300 mm
centres to the main runner or having strips of
G.I. of size that of runner for holding runner
and mesh etc. the G.I.ceiling sections having
size 51.5 mm and two flanges 26 mm each
with lips of 10.5 mm. The finished grid shall
contain 12 mm thick plain / decorative particle
boards fixed to the ceiling frame structure.
(Prior permission S.E. to be obtained
before inclusion of this item )
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
1489.00
339.00
Sq.m.
1836.00
224.00

22
BDR
21
Providing & fixing of approved make PVC

false ceiling on M.S. Rectangular hollow
section 38mm x 25mm fixed to wall with PVC
roll plugs and duly main runner & intermediate
section of M.S.square tube 25mm x 25mm
duly coated with anti corrosive primer & ceiling
panel made out of rigid PVC multichamber
hollow section of size 6mm x 250mm. Joined
with concealed screws fixed on structure and
no frame elements is visible from outside
including
suspenders
and
necessary
holes/cuts for light fixtures and remaking
damaged surface etc. (Prior permission of
S.E. to be obtained before inclusion of this
item in this estimate) complete.
Specificationincharge
as
directed
by
Engineer-
90
SR.NO.
& CODE
NO.
23
BDR
1
Providing and fixing Mangalore tiled roofing

with class "AA" tiles including securing the last
course of tiles near the eaves with steel flat 40
mm x 3 mm and 1.22 mm wire, fixing 50mm x
25mm horizontal teak wood battens and
iron works and oiling the battens complete.
(excluding ridge and hip tiles)
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
360.00
50.00
Sq.m.
371.00
54.00
Rmt.
104.00
33.00
No.
458.00
27.00
Sq.m.
136.00
17.00
No.
76.00
11.00

24
BDR
2
Providing and fixing Mangalore tiled roofing

with class "AA" tiles including securing the last
course of tiles near the eaves with steel flat 40
mm x 3 mm and 1.22 mm wire, fixing country
teak wood sloping battens of 25 mm x 12
mm, teak wood horizontal battens of 50
mm x 25 mm over the sloping battens, all
iron works and coal tarring the battens
complete. (excluding ridge and hip tiles)
25
BDR
3
Providing and fixing Mangalore tile ridge and

hip tiles of class "AA" including scaffolding if
necessary, pointing with coloured cement
mortar and curing complete.
26
BDR
11
Providing and fixing glass tiles of Mangalore

type at required places in Mangalore tile roof
including scaffolding necessary.
27
BDR
31
Providing and fixing new Mangalore tiles with

"AA" class tiles including scaffolding complete.
28
BDR
13
Providing and fixing Mangalore pattern cowl

ventilator tiles in the required places in a
Mangalore tiled roof including scaffolding
necessary.
91
SR.NO.
& CODE
NO.
29
BDR
5
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sq.m.
Sq.m.
714.00
785.00
44.00
44.00
Rmt.
82.00
7.00
Rmt.
46.00
5.00
Sqm
1341.00
85.00
Rmt.
1155.00
85.00
Providing and fixing corrugated galvanized

iron sheets for roofing without wind ties
including fastening with galvanized iron screw
and bolts and lead and bitumen washers as
per drawing complete.
a) For 20 B.W.G.
b) For 20 B.W.G.
30
BDR
29
UNIT

battens 50 mm x 25 mm for Mangalore tile
roof work with all iron work, scaffolding and
oiling the battens complete.
31
BDR
30

battens 25 mm x 25 mm for Mangalore tile
roof work with all iron work, scaffolding and
oiling the battens complete.
32
Providing
and
fixing
G.I.
precoated
metacolour sheet of 0.50 mm thick and 930
profile for roof including roof bolt and
necessary fixing arrangements ( Prior
approval of Sample and brand by Ex.
Engineer is necessary before use)
33
Providing
and
fixing
G.I.
precoated
metacolour accesories of 0.50 mm thick and
600 mm wide for ridge / valley including roof
bolt and necessary fitting arrangements ( Prior
92
SR.NO.
& CODE
NO.
34
Providing and fixing false ceiling of 12 mm

thick of fibrous plaster of paris which
includes G.I. Perimeter channel ( MF6) of size
0.40 mm thick ( having one flange of 20 mm
and another flange of 30 mm and web of 27
mm) along with perimeter of ceiling, screw
fixed to brick wall , concrete surface, partition
with the help of nylon sleeves and screws at
610 mm centers. Thereafter suspending G.I.
intermediate channel ( MF 7) 600 mm. C/C of
size 45mm (0.9 mm thick with two flanges of
15 mm each) from the soffit at 450 mm centre
with connecting angle (ie ceiling angle) of
width 25mm x 10mm x 0.40mm thick fixed to
soffit with G.I.cleat and teel expansion
fasteners. Celling sections ( MF 5 ) of 0.55
mm thickness having knurled web of 51.5
mm and two flanges of 26 mm each with lips
of 10.5 mm are then fixed to the intermediate
channel with the help of connecting clip and in
direction perpendicular to the intermediate
channel at 450 mm centers. 12.5 mm
tapered edge is then screw
fixed to celling section with dry wall screws
at 230 mm centers. Screw fixing is to be done
mechanically with suitable attachment. The
boards are to be joined and finished so as to
have flush look which includes filling and
finishing the tappered & square edges of the
boards with jointing compound, joint paper
tape and appropriate suitable primer and three
coats of oil bound distemper . The item
includes for light fitting, grill diffuseres and cut
out etc. have to be made with frame of
perimeter channels of size 20mm x 30mm x
0.55mm.thick supported suitable and angle
bead is to be used at steps to get straight line
finish etc. complete
93
UNIT
Sqm
RATES FOR 2014-15

(In Rs.)
Completed
Labour
612.00
173.00
SR.NO.
& CODE
NO.
35
Providing
and
fixing
colour
coated
Galvalume (A-Z) sheet having high
tensile(min 550 MPa in Yield strength) C.R.
steel base metal with hot dip alloy coating of
Alluminium and Zinc with 0.50 mm overall
sheet thickness for roofing with approved
profile and colour including fixing to purlins
with approved self tapping screws and
EPDM washers etc complete( Prior approval
of Sample and brand by Ex. Engineer is
necessary before use)
UNIT
RATES FOR 2014-15

(In Rs.)
Completed
Labour
Sqm
1008.00
116.00
Rmt.
567.00
92.00
No.
7500.00
549.00

36
Providing and fixing colour coated Plain

Galvalume (A-Z) sheet 60 cm wide having
high tensile (min 550 MPa in Yield strength)
C.R. steel base metal with hot dip alloy
coating of Alluminium and Zinc with 0.50 mm
overall sheet thickness for ridge,hip or valley
or eaves board
including fixing with
approved self tapping screws and EPDM
washers ,scaffolding etc complete( Prior
37
Providing and fixing Turbo Ventilator of 600

mm throat diameter of Alluminium and of
approved
make
including
fixing
on
domemanufatured from same material used
for roofing,all necessary fittings etc complete (
Prior approval of Sample and brand by Ex.
94
SR.NO.
& CODE
NO.
38
UNIT
Providing and fixing in position multiwalled

primalite (heat stoper) Poly-carbonate
sheet of approved coloured and shade of
polygal/ Lexan make or equivalent make,
sheet shall be as per manufacturer's
specifications such as it shall be solar grade
co-extruded to protect itself against yellowing
and surface wearing confirming to ASTM D1003 specifications, cutting, bending and
fixing in required piecesin radial direction
without overlaping along length with EPDM
rubber gasket, silicon sealent, self tapping
screws, labour, equipment, scaffolding and all
lead and lifts complete.
Sqm.
a) 10 mm thick
b) 8 mm thick
Sqm.
Sqm.
95
RATES FOR 2014-15

(In Rs.)
Completed
Labour
3876.00
153.00
3672.00
153.00
SR.NO.
& CODE
NO.
39a
Providing and erecting self supporting Proflex

roofing system for a godown of made up
structural grade steel of 914 millimeter width
(tolerace +/-2 millimeter), moulded at site
using mechanical press dies to the disireed
curve and shape to form 605 millimeter wide
interlocking panels. The interlocking panels
shall be pressed to close the seam forming
water tight joints for span of 15.00 meter
having arch rise as 3.00 meter and arch length
17.65 meter.The base material made up of
improrted galvolume steel complying to ASTM
A792 having base metal thickneess of 0.80
millimeter (tolerance + /-0.02 millimeter ) with
alloy coating AZ 150 and paint coating of
regular modified polyster, top coat 25 micron
and boottom coat 12 micronas per per
approved colour ,including fixing hangers,
clamps etc. as may be necessary of Proflex
standered, Including fixing sky light of 2
millimeter thick polycabonate sheet of size 2'
x 14' and turbo ventilator of 24" daimeter to be
installed at every 30 feet along the length of
roof including finishing, testing and cleaning
etc.complete.
96
UNIT
Sqm.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
2130.00
2.00
SR.NO.
& CODE
NO.
39b

etc.complete.
97
UNIT
Sqm.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
2175.00
2.00
SR.NO.
& CODE
NO.
39c

etc.complete.
98
UNIT
Sqm.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
2390.00
2.00
SR.NO.
& CODE
NO.
39d

etc.complete.
99
UNIT
Sqm.
RATES FOR 2014-15

(In Rs.)
Completed
Labour
2745.00
2.00
BD - T : DOORS AND WINDOWS

SR.NO.
& CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
1
BDT
30
Providing and fixing double leaf door,with country

teak wood shutter and panels as per detailed
drawing including iron oxidised fixtures and fastening
stoppers and finishing with one coat of primer
complete. (Excluding door frame) (Sample to be
got approved from Ex. Engineer before use)
a)
Panels of exterior grade veneered particle board

12 mm thick 3 layered flat pressed teak wood particle
board bonded with BWP type exterior grade phenol
formaldehyde synthetic resin with commercial
veneers on both sides conforming to I.S. 3097 1980
Novateak or equivalent and door conforming to
I.S.1003 - 1957(Revised)(1977)
Sq.m
3400.00
788.00
b)
Panels of 12 mm thick, exterior grade prelaminated

particle board laminated on both side.
Sq.m
3580.00
788.00
Spec.No.: Bd.T.30/Page No.496

2
BDT
31
Providing and fixing single leaf door,with country

teak wood shutter and panels as per detailed
drawing including iron oxidised fixtures and fastening
stoppers and finishing with one coat of primer
complete. (Excluding door frame) (Sample to be
a)
panels of exterior grade veneered particle board 12

mm thick 3 layered flat pressed teak wood particle
formaldehyde synthetic resin with commercial
veneers on both sides conforming to I.S. 3097 1980
Novateak or equivalent and door conforming to
I.S.1003 - 1957(Revised)(1977)
Sq.m
2800.00
788.00
b)
panels of 12 mm thick, exterior grade prelaminated

particle board laminated on both side.
Sq.m
3280.00
788.00
Spec.No.:Bd.T.31/Page No.499
100
SR.NO.
& CODE
NO.
3
BDT
34
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Providing and fixing factory made solid core flush

door in single leaf 35 mm thick, decorative types, of
exterior grade, as per detailed drawings, conforming
to I.S.:2202 - 1962 (Revised) including Burmah/
superior decorative Indian teak wood frame,
approved face veneers on both faces with/without
glazing and venetians in the positions shown on the
drawings or as directed, all necessary beads,
moulding and lipping, wrought iron holdfasts,
chromium plated fixtures and fastenings without/with
brass mortise lock, chromium plated handles on both
sides, stoppers and finishing with french-polish/
waxing complete. (without door frame).(Sample to be
got approved from Ex.Engineer before use)
a) For 35 mm thick
Sq.m
2400.00
501.00
b) For 32 mm thick
Sq.m
2171.00
501.00
a) For 35 mm thick
Sq.m
2621.00
540.00
b) For 32 mm thick
Sq.m
2387.00
540.00

4
BDT
35
Providing and fixing factory made solid core flush

door
shutters
in
double
leaves
35mm
thick,decorative type of exterior grade, as per detailed
drawings, conforming to I.S.: 2202 1966 (Revised)
including Burmah/Superior Indian teak wood
frame, approved decorative face veneers on both
sides, without glazing and venetians including
chromium oxidised fixtures and fastening, stoppers
and finishing with french polishing etc. (Excluding
door frame)(Sample to be got approved from Ex.
Spec.No.: Bd.T.35/page No.500
101
SR.NO.
& CODE
NO.
5
BDT
55
Providing and fixing rolling steel shutters fabricated

from 20 guage steel laths with slide guides, bottom
rail, brackets, door suspension shaft including rolling
springs, locking arrangement and housing box at top
including one coat of red lead primer etc. complete.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m.
2136.00
196.00
Sq.m.
2485.00
268.00
Sq.m.
2594.00
359.00
Sq.m.
545.00
90.00
Spec.No.: Bd.T.55/Page No.510.

6
BDT
56
Providing and fixing rolling steel shutters fabricated

from 20 guage steel laths with slide guides, bottom
rail, brackets, door suspension shaft, housing box at
the top including mechanical gear operation
arrangement and one coat of red lead primer etc.
complete.
Spec.No.: Bd.T.56/Page No.511.
7
BDT
57
Providing and Fixing collapsible steel gates in two

leaves with channel pickets, pivoted flat bars,
including top and bottom guides, rollers, stoppers,
handles, all fitting accessories, locking arrangement
and one coat of red lead primer etc. complete.
Spec.No. : Bd. T. 57/Page No. 511.
8
BDT
95
Providing and fixing 24 guage PLAIN ALLUMINIUM

SHEET on the face of door shutter including cutting
to required size and fixing by screws including making
good the damages if any to existing door shutter and
frame etc. complete as directed or as per detailed
drawing.
102
SR.NO.
& CODE
NO.
9
BDT
110
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Providing and fixing factory made soild core flush

door (I.S.2202 1962 Revised 1966) in single leaf
with glazed ventilator commercial type of exterior of
seasoned wood frame 60mm x 100mm with
approved commercial ply wood facing wrought iron
hold fast Aluminium fixtures and fastening and
handles on both sides finishing with oil painting 3
coats etc. complete. (Sample to be got approved
from Ex.Engineer before use)
a) For 35 mm thick
Sq.m
3414.00
692.00
b) For 32 mm thick
Sq.m
3221.00
692.00
Sq.m.
2785.00
716.00
Sq.m.
1475.00
268.00
Sq.m.
1145.00
181.00
Spec.No: As directed by Engineer- in-charge

10
BDT
118
Providing and fixing crimped wire netting single

shutter door with 60 mm x 100 mm country teak
wood door frame including oil painting 3 coats and
iron oxidised fixtures and fastening complete.
11
BDT
122
Providing and fixing M.S. grill doors weighing 22 to

24 kg per sq. meter of required size as per detailed
drawing without hot dip coating with iron oxidised
fixture and fastening and painting with 3 coats oil
paints etc. complete. (Sample to be got approved
12
BDT
134
Providing and fixing mild steel frame of door of

angle 50 x 50 x 6 mm with 16mm dia. M.S. bars
fixed horizontally at 10 cm C/C for ventilator portion
including iron holdfasts, boxes for fixing shutters
including welding, painting, finishing and tie rod of 12
mm square bar at bottom as per specification etc.
complete.
103
SR.NO.
& CODE
NO.
13
BDT
135
Providing and fixing mild steel frame of door of

angle 40 x 40 x 5 mm with 16mm dia. M.S. bars
fixed horizontally 10 cm c/c for ventilator portion
including iron holdfasts, boxes for fixing shutters
including welding, painting, finishing and tie rod of 12
complete.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m.
741.00
161.00
Sq.m.
948.00
206.00
Sq.m.
758.00
153.00
Sq.m.
785.00
170.00

14
BDT
135A
Providing and fixing cold rolled mild steel frame for

door 100 mm x 60 mm of 16 guage as per drawing
with/without ventilator including holdfasts, hinges
welded to the frame, including filling cement mortar
1:6 in hollow core and finishing with oil painting and
tie rod of 12 mm square bar at bottom as per
specification etc. complete.
15
BDT
135B
Providing and fixing door frame of mild steel hot

rolled section of standard EZ-7 conforming to I.S:
7452-1982 as per drawings with/ without ventilator,
holdfasts, hinges welded to the frame and finishing
with oil painting and tie rod of 12 mm square bar at
bottom as per specification etc. complete. (Sample
to be got approved from Ex. Engineer before use)
16
BDT
135C
Providing and fixing door frame of mild steel hot

rolled section of standard EZ-7 conforming to IS:
7452-1982 with Hot dip Zinc coating as per drawing
with/without ventilator, holdfasts, hinges welded to the
frame and finishing with oil painting and tie rod of 12
complete. (Sample to be got approved from Ex.
104
SR.NO.
& CODE
NO.
17
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m.
937.00
205.00
Sq.m.
2680.00
786.00
a) For anodised aluminium doors
Sq.m.
3564.00
573.00
b) For powder coated aluminium doors
Sq.m.
3423.00
573.00
Providing and fixing pressed steel door box frame

of M.S.sheet made of 18 guage thick of required
section with rebate of 10 mm for required thickness of
shutters and tie rod of 12mm square bar at bottom as
per specifications with or without ventilators including
holdfasts, hinges welded to the frame, filling in box
frame in C.M. 1:10 and finishing with 2 coats of oil
painting etc. complete.
18
Providing and fixing 25 mm thick 3 layers flat

pressed T.W. particle board shutters with
B.W.P.type exterior grade phenol formaldehyde resin
conforming to I.S.12823-1990 both sides laminated
and covered with M.S. box frame. (Sample to be got

19
Providing and fixing aluminium fully glazed doors

including door frame with powder coating 5 mm
thick sheet glass necessary fixtures and fastenings,
neoprene type rubber plain gaskets as per detailed
drawing and specifications etc. complete. (Sample to
be got approved from Ex. Engineer before use)
105
SR.NO.
& CODE
NO.
20
Providing and fixing factory made precast

door/window frames of C.C. M-40 grade of section
100 mm x 60 mm including reinforcement as per
I.S.6523 with polymeric blocks having screw holding
capacity of 250 kg/screw fixed in position in
R.C.C.frame as per requirement and as per
specifications without fan light including holdfasts,
carting and erecting in position and two coats of oil
paint etc. complete.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Rmt.
289.00
71.00
Sq.m.
1809.00
500.00
Sq.m.
561.00
71.00
Sq.m.
826.00
107.00

21
Providing and fixing 18 guage M.S. sheet door with

frame work 40 x 40 x 6 mm M.S. Angle including
locking arrangements, hold fast including applying
anticorrossive primer coat of red lead paint and 2
coats of oil paint and 12mm square bar at bottom
as per specification complete.
22
BDT
22
Providing and fixing of approved make PVC door

frame made out of rigid PVC hollow section of
size 38mm x 32mm. Machine cut with solid polymeric
reinforcement for holding hinges and the rod at
bottom including fixing 100mm. Long full threaded
metal screws in required Nos. in PVC roll plugs
inserted in wall as hold fast and remaking damaged
surface etc. complete.
Specification -as directed by Engineer incharge.

23
BDT
23
Providing and fixing of approved make PVC door

frames made out of rigid PVC hollow section of
size 48mm x 40mm. Machine cut with solid
polymetric reinforcement for holding hinges and tie
rod at bottom including fixing 100mm. Long full
threaded metal screws in PVC roll plugs inserted in
wall as hold fast and remaking damaged surface etc.
complete.
Specification - As directed by Engineer Incharge.
106
SR.NO.
& CODE
NO.
24
BDT
24
Providing & fixing of approved make PVC door

frames made out of rigid PVC hollow section of
size 60mm x 50mm Machine cut with solid
polymetric reinforcement for holding hinges and tie
rod at bottom including fixing 100mm long full
threaded metal screw in PVC roll plugs inserted in
wall as hold fast and remaking damaged surface etc.
complete.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m.
1030.00
134.00
Sq.m.
2468.00
179.00
Specification : As directed by Engineer-in-charge

25
BDT
25
Providing & fixing of approved make solid Panel of

29mm thick PVC single leaf door shutter of
approved colour and design made out of rigid PVC
hollow section shutter frame in configuration of A
section of size 50mm x 29mm as vertical styles, top &
bottom rails Machine cut and panel in fill of single
panel multi chambers hollow plastic section of size
25mm x 750mm. with solid polymetric 'L' corner
reinforcement holding brackets and solid polymetric
reinforcement fillers for holding hinges, aldrops, latch,
tower bolts, etc. remaking damaged surface etc.
compete.
Specification - As directed by Engineer Incharge.
107
SR.NO.
& CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
26
Providing & fixing of approved make solid Panel of

24mm thick PVCsingle leaf door shutter made out
of rigid PVC hollow section shutter frame in
configuration of A section of size 24mm x 45mm as
vertical styles, top and bottom rails Machine cut and
panel in fill plain multi chamber hollow plastic section
of size 20mm x 200mm joined each other by tongue
and groove inter locking system with polymetric 'L'
corner reinforcement holding, bracket & solid
polymeric reinforcement fillers for holding hinges,
aldrops, latch, tower bolts etc. and remaking
damaged surface etc.complete.
Specification : As directred by Engineer Incharge.
Sq.m.
2137.00
17.00
27
Providing and fixing single leaf door shutter of

approved make and colour made out of extruded
rigid PVC hollow section DWUF-306 shutter frame of
size 33 mm x 47 mm having double wall construction
as vertical styles, top and bottom rails and middle
locks rail of size 33 mm x 94 mm and the panel in fill
SPUF-101 multichamber hollow plastic section of size
20 mm x 200 mm joined each other by tongue and
groove interlocking system duly inserted in shutter
frame and all shutter frames, lock rails, styles
reinforced by seasoned wood inserted inside for fixing
of hinges, aldrops, tower bolts and door stoppers etc.
all corners should be Machine cut, joined each other
by metal screw after inserting rigid "L" bracket PVC
reinforcement of size 125 mm x 200 mm. Including
synthetic metal fixtures and fastenings, remaking
damaged surface etc. complete.
Sq.m.
2713.00
161.00
108
SR.NO.
& CODE
NO.
28
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Providing and fixing in position alluminium louvered

windows/ ventilators of various sizes as per detailed
drawings and specifications including aluminium
frames 80 x 38 mm box type 5 mm thick sheet glass
louveres, clips / rubber plain P.V.C. gaskets of
approved quality etc.complete. (Sample to be got
a) Aluminium louvered window / ventilator
Sq.m.
4049.00
178.00
b) For powder coated aluminium window /

ventilator
Sq.m.
3902.00
178.00
a) Without M.S. Box frame
Sq.m.
2098.00
243.00
b) With M.S. Box frame of size 40mm x 40mm x

2mm thickness all around
Sq.m.
2529.00
243.00

29
BDT
53
Providing and fixing steel windows of various sizes

as per detailed drawings without hot dip zinc coating
without/with ventilator including fabrication, glazing
with non-acetinic/plain/obscured glass panels of
approved type and quality, all fixtures and fastening
without teak wood boxing, and architraves and
finishing with one coat of primer complete. (Sample
to be got approved from Ex. Engineer before use)
109
SR.NO.
& CODE
NO.
30
BDT
53A
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour

as per detailed drawings without hot dip zinc coating
without/with ventilator including fabrication, glazing
with non-acetinic/plain/obscured glass panels of
approved type and quality, all fixtures and fastening
without teak wood boxing and architraves and
finishing with one coat of primer complete. (with
flash butt welding) (Sample to be got approved
Sq.m
2262.00
251.00
b) With M.S. Box frame of size 40mm x 40mm

x2mm thickness all around
Sq.m
2583.00
251.00
Sq.m
2812.00
360.00

Sq.m
3134.00
360.00

31
BDT
53A

as per detailed drawings with welded square bars 12
mm at 10cm centre to centre without hot dip Zinc
coating without/with ventilator including fabrication,
glazing with non-acetinic / plain /obscured glass
panels of approved type and quality, all fixtures and
fastenings without teak wood boxing, and architraves
and finishing with one coat of primer complete.
(Sample to be got approved from Ex. Engineer
before use)
110
SR.NO.
& CODE
NO.
32
BDT
53B
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour

as per detailed drawings with welded square bars 12
mm at 10 cm centre to centre without hot dip Zinc
coating without / with ventilator including fabrication
glazing with non- acetinic/plain/obscured glass panels
of approved type and quality, all fixtures and
fastenings without teak wood boxing, and architraves
and finishing with one coat of primer complete. (with
flash butt welding) (Sample to be got approved
Sq.m
2981.00
377.00

Sq.m
3297.00
373.00
a) Double anodised aluminium window / ventilator
Sq.m
4066.00
897.00
b) For powder coated aluminium window /

ventilator
Sq.m
3913.00
897.00
33
BDT
97
Providing and fixing in position alluminium windows

/ ventilators of various size with openable / sliding
aluminium frame, 5 mm thick plain sheet glass
shutter, glazing clips / neoprene / rubber / PVC
Gasket of approved quality, chromium plated brass
wigs, other aluminium fixture and fastenings,handle,
stopper etc. complete including making the damaged
structure to its original condition. (Sample to be got
111
SR.NO.
& CODE
NO.
34
BDT
98A
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Providing, supplying and fixing in position aluminium

casement / openable window of outer frame size
44mm x 44mm or as of required size with
proportionate change in weight of average weight @
0.90 kg per metre and shutter of 44 mm x 64 mm ( or
as required size ) of average weight of 0.30 kg per
metre (or as required) with plain sheet glass with
neoprene/rubber gasket with hinges, locking
arrangement, pegstay etc. as per approved drawing,
specification etc. complete.(as per Architect's drawing
Job No.T-MISC/ 5000 drawing No. 22 dated 3.2.1992)
(Sample to be got approved from Ex.Engineer
before use)
a) Anodised extruded aluminium window
Sq.m
4513.00
897.00
b) For powder coated aluminium window
Sq.m
4316.00
897.00
Sq.m
4115.00
966.00
Sq.m
3995.00
966.00

35
BDT
98B
Providing and fixing in position aluminium fixed

glass pannelled window having frame made out
extruded tubular section of size 34 mm x 42 mm (or
as required size in proportionate weight) of average
thickness 1.50 mm and weight 0.726 kg per metre(or
as required), mechanically assembled at corners with
glazing beading of average 0.26 kg per running metre
or required weight including plain sheet glass with
neoprene/ rubber gasket etc. complete. (As per
Architect's drawing job No. T MISC/5000/drawing
No.22 dated 3.2.1992)
a) Anodised extruded aluminium fixed glass

pannelled window
b) For powder coated aluminium window
112
SR.NO.
& CODE
NO.
36
BDT
98C
Supplying and fixing in position anodised extruded

aluminium extruded section Two track sliding
windows upto 1.2 metre height, outer frame made
from section of over all size 62 mm x 45 mm, bottom
section with or without drain section, track weighing
0.90 kg per metre and top and side section weighing
0.838 kg per running metre with shutter or sections
made of 19 mm x 40 mm size having average weight
of 0.6 kg per running metre(or as required size) with
change in proportionate weight,with 5.00 mm selected
quality plain sheet glass fixed with new neoprene
gasket shutters to be provided with nylon encased
stainless rollers, necessary locks and handles
complete. (As per Architect's drawing no.Job No. TMISC/5000 Drg.No.22 dated 3.2.1992)
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
4044.00
627.00
Sq.m
4404.00
627.00
Sq.m
4306.00
627.00

37
BDT
98D
A) Supplying and fixing in position colour anodised

extruded aluminium section Three track sliding
section with or without drain section track weighing
change in proportionate weight,with 5.00 mm
selected quality plain sheet glass fixed with new
neoprene gasket shutters to be provided with nylon
encased stainless rollers, necessary locks and
handles complete. (As per Architect's drawing no.Job
No. T- MISC/5000 Drg.No.22 dated 3.2.1992)

B) With 5.00 mm selected quality plain sheet glass
and Netlon or equivalent type extruded mosquito
proof netting.
113
SR.NO.
& CODE
NO.
38
BDT
98D
A) Supplying and fixing in position colour anodised

extruded aluminium section Four track sliding
section with or without drain section track weighing
change in proportionate weight,with 5.00 mm
selected quality plain sheet glass fixed with new
neoprene gasket shutters to be provided with nylon
encased stainless rollers, necessary locks and
handles complete. (As per Architect's drawing no.Job
No. T- MISC/5000 Drg.No.22 dated 3.2.1992)

B) With 5.00 mm selected quality plain sheet glass
and Netlon or equivalent type extruded mosquito
proof netting.
39
BDT
120
Providing and fixing M.S. iron bars 16 mm dia for

steel windows and ventilators at 10cm C/C
including M.S. flat 40 mm x 8mm at centre (vertically)
and cutting, welding and painting in two coats of oil
paint etc. complete.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
4763.00
627.00
Sq.m
4665.00
627.00
Sq.m
889.00
161.00
Sq.m
981.00
170.00
Spec.No.:As directed by Engineer- in-charge.

40
BDT
121
Providing and fixing M.S. iron bars of 16 mm dia for

steel windows and ventilators at 10cm C/C and
M.S. flat 40 mm x 6 mm at sides and 50 mm x 10 mm
at centre in windows and ventilators including cutting,
welding and oil painting in two coatsetc complete.
114
SR.NO.
& CODE
NO.
41
Providing and fixing Z-type (Staggered) stee

ventilator fully glazed with Z-section of 10
gaugeand MS mesh of 12 gauge (opening 25 x 25)
as per detailed drawing with outer frame of Z-section
including two 12 mm square bar in each panel
,fabricating,glazing with 6 mm thick wire glass and of
approved type and quality and fasteningand oil
painting two coats etc. complete.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
2453.00
427.00
Sq.m
0.00
2126.00
0.00
356.00
Sq.m
0.00
1461.00
0.00
143.00

42
BDT
123
Providing and fixing steel ventilator fully glazed

partly top hung and partly fixed as per detailed
drawing without hot dip zinc coating including
fabricating glazing with plain obscured glass panes of
approved type and quality and fastening without teak
wood boxing and architecture and oil painting two
coats etc. complete. (Sample to be got approved
43
BDT
133
Providing and fixing steel frame of angle 40 x 40 x 5

mm size with 16 mm dia bars for windows, mild steel
bar horizontally at 10 cm C/C for ventilator portion and
15 cm C/C for remaining portion with M.S. plate size
40 x 6 mm vertical at centre including iron holdfasts
boxes for fixing 40 x 6 mm fixing shutter including
welding, finishing, painting with two coats of oil paint
etc. complete (without/ with ventilator)(Sample to be
115
SR.NO.
& CODE
NO.
44
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
2496.00
357.00
a) Anodised aluminium windows
Sq.m
3989.00
627.00
b) For powder coated aluminium windows

Spec. No.: As directed by Engineer-in-charge.
Providing & fixing of approved make PVC Openable
Glazed Window frame fabricated with rigid PVC
hollow section of size 48mm x 40mm & fixing mullion
section of size 63.5mm x 40mm with concealed solid
polymeric reinforcement shall have mitre cut and fixed
with the help of 100mm long full threaded metal
screws in PVC roll plugs inserted in wall as hold fast
shutter shall be fabricated out of rigid PVC hollow
section on size 26mm x 47mm having double wall
construction duly fixed with 4mm thick clear vision
plain glass with solid polymeric reinforcement for
holding hinges, handles, windstay & stoppers at
necessary junction and remaking damages surface
etc. complete.
Sq.m
3870.00
627.00
Sq.m
2780.00
339.00
Providing and fixing steel Louvered windows /

ventilators of various sizes as per detailed drawing
without hot dip zinc coating including fabrication with
approved type and quality all fixtures and fastening
without teak wood boxing and architraves including
finishing with one coat of primer and two coats of oil
painting complete. (Sample to be got approved

45
46
BDT
45
Providing and fixing aluminium windows with

sliding shutters including aluminium frame with
powder coating, 5 mm thick sheet glass, necessary
fixtures and fastenings, neoprene / plain rubber
gaskets as per detailed drawing and specifications
etc. complete. (Sample to be got approved from
Ex. Engineer before use)
116
SR.NO.
& CODE
NO.
47
BDT
46
Providing & fixing of approved make three track

PVC sliding Glazed window frame fabricated out of
rigid PVC hollow section of size 45mm x 96mm with
concealed solid polymeric reinforcement shall have
mitre cut and fixed with the help of 100mm long full
threaded metal screws in PVC roll plugs inserted in
wall as hold fast. Sliding shutter shall be fabricated
out of rigid PVC hollow section of size 45mm x 58mm
and interlocking section of size 5mm x 33mm shall be
fixed on vertical member of sliding shutter. The snap
fit glazing bid of size 21mm x 18.5mm shall be fixed
alongwith sliding shutter for fixing the 5mm thick clear
vision glass panel. Necessary hardware such as
polyester pile seal, rubber gasket, roller bearing and
lock etc. shall be fixed at required junction.
Drainage hole shall be made at the bottom of window
frame etc. and remaking damaged surface complete.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
2978.00
356.00
Sq.m
2213.00
268.00
Spec.No. :As directed by Engineer-in-charge

48
BDT
47
Providing & fixing of approved make PVC Louvered

/ fixed Glazed window / ventilator frame fabricated
out of rigid PVC hollow section of size 48mm x 40 mm
with concealed solid polymeric reinforcement shall
have mitre cut and fixed with the help of 100mm long
full threaded metal screws in PVC roll plugs inserted
in wall as hold fast. The snap fit glazing bid of size
19mm x 19.5mm shall be fixed alongwith outer frame
for fixing the 5mm thick clear vision glass panel or
louvered. Necessary hardware such as rubber gasket,
louvered glass holding clip shall be fixied at required
junction etc. complete.
Spec. No. : As dircted by Engineer-in-charge
117
SR.NO.
& CODE
NO.
49
Providing & fixing of approved make sand witched

type PVC partition 50 mm. Thick paneled/partly
glazed in double wall construction made out of
M.S.Rectangular hollow tube section of size 38mm x
25mm with anticorrosive primer vertical horizontal
members not exceeding in the grid of 1m x 1m and
both side wall panels fixed with rigid PVC multi
chamber hollow plastic section of size 6mm x 250mm
in double wall construction and end sealing with rigid
PVC section 71mm x 20mm. The structure shall be
fixed in floor walls with PVC roll plugs and 100mm
long full threaded metal screws including clear vision
plain glass 5mm thick as required and door complete
and remaking the damaged surface etc. complete.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
2754.00
404.00
Sq.m
1806.00
295.00
Sq.m
2304.00
316.00
Specification : As directed by Engineer Incharge.

50
BDT
61
Providing and fixing partition of asbestos sheet 6

mm thick with country teak wood frame work
consisting of 70 x70 mm vertical and horizontals of 70
x 35 mm and covering battens 20 x 10 mm at 1 m
C/C on both ways including finishing with one coat of
primer/ french polishing etc complete.
Spec.No.: Bd.T.61/Page No. 513
51
BDT
66A
Providing and fixing partition of 12mm thick three

layered flat pressed prelaminated teak wood
particle board exterior grade, BWP types Bonded
with phenol formaldehyde synthetic resin conforming
to I.S.12893-1990 including C.T.W. vertical 70 x 70
mm and top central and bottom rails of 70 x 35 mm
and covering battens of 20 x 10 mm at 1 m C/C on
both ways including finishing with one coat of primer
etc complete.
118
SR.NO.
& CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
52
BDT
68
Providing and fixing partition with 4mm thick

superior Indian teak veneers on both sides including
C.T. wood frame work 80 mm x 40 mm at 60 cm
centre to centre and french polishing (without skirting)
etc complete.
Sq.m
2631.00
394.00
53
BDT
68A
Providing and fixing partitions with 6 mm thick

Indian teak veneers on one side including C.T. wood
frame work 80 mm x 40 mm at 60 cm C/C and french
polishing without skirting etc complete.
Sq.m
2010.00
394.00
Sq.m
1589.00
246.00
Sq.m
1805.00
345.00

54
BDT
79
Providing and fixing partitions using 2.1 metre

height and 12 mm thick three layered flat pressed
veneered teak wood particle board, exterior grade,
bonded with BWP type phenol formaldehyde synthetic
resin conforming to I.S.12893-1990 with commercial
veneers on both side including Aluminium frame and
verticals of size of 65 mm x 40 mm in a pannels of
1.20 m etc. complete. (As per detailed drawing)
(Sample to be got approved from Ex. Engineer
before use)

55
BDT
83
Providing and fixing partitions of 4mm thick Indian

teak veneers on one side and 4 mm. commercial type
plywood on the other side including C.T.W. frame of
70 mm x 35 mm. at 60 cm. C/C including finishing
with french polishing to veneer face and oil
painting/french polishing other face etc. (as per
detailed drawing) complete. (without skirting)
119
SR.NO.
& CODE
NO.
56
57
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Providing, supplying and fixing in position aluminium

partitions, partly glazed and partly laminated
having frame made out of extruded tubular section of
size 40mm x 65 mm with 12 mm thick three layered
flat pressed teak wood particle board bonded with
BWP type exterior grade phenol formaldehyde
synthetic resin conforming to I.S.12823-1990,
laminated on both sides, Novateak or equivalent and
5 mm thick selected quality float glass pannels fixed
with aluminium glass clips 12 mm x 12 mm and
rubber cushioning beading to glass partition as per
approved drawing etc. complete. (Sample to be got
a) Anodised extruded aluminium partitions
Sq.m
2551.00
429.00
b) For powder coating extruded aluminium

partitions
Providing, supplying and fixing in position alluminium
partitions with both sides laminated panels
having frame made out of aluminium extruded
tubular section of size 40 mm x 65 mm with 12 mm
thick three layered flat pressed teak wood particle
formaldehyde synthetic resin conforming to I.S.128231990, laminated on both sides, Novateak or
equivalent fixed with aluminium glazing clips of size
12mm x 12 mm as per approved drawing etc.
complete.(Sample to be got approved from Ex.
Sq.m
2409.00
429.00

partitions
Sq.m
Sq.m
2834.00
2681.00
356.00
356.00
120
SR.NO.
& CODE
NO.
58
59
BDT
93
60
BDT
94
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Providing and fixing in position anodised extruded

alluminium partition having frame made out of
aluminium extruded tubular section of size 65 mm x
40 mm with 12 mm thick three layered flat pressed
teak wood particle board bonded with BWP type
exterior grade phenol formaldehyde synthetic resin
conforming to I.S.12823-1990, laminated on both
sides, Novateak or equivalent, Laminated 5 mm thick
selected quality of glass pannels fixed with aluminium
glazing clips 12mm x 12mm (conical) rubber
cushioning to glass as per detailed drawings etc.
complete.(Sample to be got approved from
Ex.Engineer before use)
Sq.m
2741.00
429.00

partitions
Sq.m
2583.00
429.00
Sq.m
Sq.m
556.00
589.00
84.00
85.00
Sq.m
265.00
71.00
Providing and fixing plain G.I. sheets on top of

weather shed including scaffolding, fixing by means
of nuts and bolts or as directed or as per detailed
drawing complete. (Brackets of 70 mm x 45 mm to be
paid seperately)
a) For 22 B.W.G. plain G.I. sheet
b) For 20 B.W.G. plain G.I. sheet
Providing and fixing 4 mm thick plain A.C. sheets
on top of the weather shed including scaffolding,
fixing by means of nuts and bolts or as directed etc.
complete as per detailed drawing (Brackets of 70 mm
x 45 mm to be paid seperately).
121
SR.NO.
& CODE
NO.
61
BDT
113
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
Sq.m
600.00
643.00
71.00
71.00
Sq.m
592.00
63.00
Sq.m
1164.00
359.00
Sq.m
Sq.m
3713.00
4080.00
359.00
732.00
Providing and fixing glass panels 5.0 mm thick for

all size including putty, C.T. beading etc. partition
complete.
a) For clear glass
b) For Frosted Glass 5.0 mm thk. for all partitions.
62
Providing and fixing UV proof plastic sheet panels

of approved quality in required thickness of 3 mm
plain, clear or any colour or obscured (lining) in lieu of
glass panes to doors/windows including providing and
fixing clips, putty etc. complete. (Sample to be got
approved from Ex.Engineer before use)
63
Providing and fixing GYP board material stud single

layer partition 97.00 mm thick using single board of
12.5 mm thick on each side of 34/76/36 mm studs
fixed to floor and ceiling channel 70/32 mm at every
610 mm regular interval horizontally including
finishing the joints with jointing compounds, paper
tape and two coats of primer paint etc complete.
64
Providing and fixing decorative grill of various sizes

as per detail drawing and specification etc. complete.
(Prior permission to be obtained from S.E. before
execution of this item)
a) Alluminium
b) Stainless Steel (Weight @ 15 Kg/Sqm.)
122
SR.NO.
& CODE
NO.
65
66
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Providing and fixing acrylic plastic sheet panels of

approved quality in required thickness plain clear or
any colour or obscured linings in lieu of glass pans to
doors/windows including providing and fixing clips,
putty etc. complete.
a) For 2.00 mm thickness
b) For 3.00 mm thickness
Sq.m
Sq.m
960.00
1250.00
44.00
62.00
Providing and fixing of approved make wall

panelling of approved design and colour made out of
extruded rigid PVC double wall construction with
multichamber hollow plastic section SPUF-141, 142,
143 of size 10 mm x 150 mm on the grid horizontal,
vertical aluminum pipe section 25 mm x 25 mm as
required plastic section will be fixed with concealled
screws on frame work, corner supported with PVC "L"
section and no screws shall be visible.
Sq.m
1663.00
268.00

67
BDT
2
Providing and fixing country teak wood frame of

required section for second class doors with/without
ventilator windows and wondows fan light and clear
storey windows including all mouldings, chamfering,
rounding, and abauting holdfasts and finishing with
one coat of primer and two coats of oil painting etc.
complete.(Only for exterior doors)
123
Cu.m 101555.00 15701.00
SR.NO.
& CODE
NO.
68
Providing and Fixing C.T.W. 2nd class fully glazed

ventilator rectangular in shape as per detailed
drawing including iron oxdized fixtures and fastenings
and finishing the wood work with one coat of primer
etc. (without M.S. bar and frame) complete.(Only
for exterior windows) (Prior permission of S.E.to
be obtained for inclusion of this item in estimate.)
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
2898.00
788.00
Sq.m
5268.00
1379.00
Sq.m
3595.00
1182.00
Sq.m
3099.00
985.00

69
BDT
4A
Providing and Fixing C.T.W. 2nd class fully glazed

ventilator rectangular in shape as per detailed
drawing including iron oxidized fixtures and fastenings
and finishing the wood work with one coat of primer
etc. (with mild steel bars and frame) complete.
Spec.No.: Bd.T.4/Page No. 479
70
BDT
11
Providing and fixing country teak wood double leaf,

2nd class partly panelled and partly glazed door
without fanlight/ ventilator as per drawings including
iron oxidised fixtures and fastenings and finishing the
wood work with one coat of primer etc. (excluding
door frame) complete.
71
BDT
12
Providing and fixing country teak wood single leaf,

2nd class partly panelled and partly glazed door
without fan light / ventilator as per drawings including
iron oxidised fixtures and fastenings and finishing the
wood work with one coat of primer etc.(excluding
door frame) complete.
124
SR.NO.
& CODE
NO.
72
BDT
23
Providing and fixing country teak wood double leaf

2nd class 20mm thick false panelled door without
fanlight as per detailed drawings including iron
oxidised fixtures and finishing with one coat of primer
etc.(excluding door frame) complete.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
3227.00
1083.00
Sq.m
3099.00
985.00
Spec.No.: Bd. T. 23/ Page No. 494

73
BDT
24
Providing and fixing country teak wood single leaf,

2nd class 20 mm thick false panelled door without
ventilator as per detailed drawings including iron
oxidised fixtures and fastenings and finishing the
wood work with one coat of primer (excluding door
frame) etc. complete.
74
BDT
127A
Providing and fixing double leaf panelled door

C.C.T.W. 60 mm x 100 mm frame with ventilator,
shutters 32 to 35 mm thick as per detailed drawings
consisting of C.C.T.W. vertical styles and top rail 100
mm x 35 mm and lock and bottom rail 200mm x 35
mm including Iron oxidised fixtures and fastenings
and T.W. beading at junctions of panels, inserted
including three coats of oil painting complete.
before use)
a)
Panels of 12 mm thick 3 layered flat pressed teak

wood particle board bonded with BWP type exterior
grade phenol formaldehyde synthetic resin with
commercial veneers on both sides (conforming to I.S.
3097-1980) Novateak or equivalent
Sq.m
4356.00
887.00
b)

paticle board laminated on both side.
Sq.m
4563.00
887.00
125
SR.NO.
& CODE
NO.
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
75
BDT
127B
Providing and fixing single leaf panelled door

C.C.T.W. 60 mm x 100 mm frame with ventilator,
shutters 32 to 35 mm thick as per detailed drawings
consisting of C.C.T.W. vertical styles and top rail 100
mm x 35 mm and lock and bottom rail 200 mm x 35
mm including Cromium Plated fixtures and fastenings
and T.W. beading at junctions of panels inserted
including three coats of oil painting complete.
before use)
a)
Panels of 12 mm thick 3 layered flat pressed teak

wood particle board bonded with BWP type exterior
grade phenol formaldehyde synthetic resin with
commercial veneers on both sides (conforming to I.S.
3097-1980) Novateak or equivalent
Sq.m
3625.00
754.00
b)

paticle board laminated on both side.
Sq.m
4239.00
788.00
76
BDT
42
Providing and fixing country teak wood 25 mm thick

double leaf second class window with plain/
obscured glazed shutters without ventilator or
fanlight as per detailed drawings including iron
oxidised fixtures and fastenings stoppers and
finishing the wood work with one coat of primer
(excluding window frame) complete.
Sq.m
3334.00
1064.00
126
SR.NO.
& CODE
NO.
77
BDT
Providing and fixing 30mm thick factory made PVC

rigid foam panelled door shutters made of MS
tube 19 guage thickness size 19mm x 19 mm for
styles and 15 mm x 15 mm for top and bottom rails,
covered with heat moulded PVC "C" channel of 5 mm
thick sheet and 30 mm x 75 mm wide to form styles
and 5 mm thick and 100 mm wide PVC sheet for top
rail, lock rail and bottom rail on either sides and 5 mm
thick 20 mm wide cross PVC sheet as gap inserted
for top rail and bottom rail, panelling of 5 mm thick,
PVC sheet fitted in MS frame welded / seal to the
style and rails with 5 mm x 30 mm PVC sheet beading
on either side joint together with solvent cement
adhesive etc. complete .
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
2652.00
386.00
Sq.m
1122.00
171.00
as per manufacturer's specification and direction of

Engineer-In-Charge fixed to the frames with stainless
steel hinges of 75 mm size aluminium tower bolt 100
mm size aluminium aldrop 250 mm size handles 100
mm size including all material, labour, machinery etc
complete. ( For WC / Bath Shutters ) ( the item is
exclusive of door frame.)

78
BDT
Providing and fixing factory made PVC door frame

of approved make of size 50 mm x 45 mm with a
wall thickness of 5 mm made out of extruded 5 mm
rigid PVC foam sheet mitred at corners and joined
with 2 nos of 150 mm long bracket of 15 mm x 15 mm
M.S. square tube the vertical door profiles to be
reinforced with 19 mm x 19 mm M.S. square tube of
19 guage EPDM rubber gasket weather seal to be
provided throughout the frame. The door frame to be
fixed to the wall using M.S. screws of 65 / 100 mm
size complete as per manufacturer's specification and
direction of Engineer-In-Charge.
127
SR.NO.
& CODE
NO.
79
BDT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
Sq.m
3968.00
3749.00
919.00
919.00
a) anodised alluminium doors
Sq.m
5026.00
1451.00
Sq.m
4898.00
1451.00
Providing and fixing in position alluminium single

leaf panneled door with fan light mounted on floor
spring, outer frame of size 100 mm. X 45 mm.of
average thickness
2 mm. and weight 1.608
Kg. Per Rmt., Mechanically assembled at corner with
shutter styles of size 50 mm. x 45 mm. x 2.82 mm. @
1.351 Kg./ Rmt. top rail 50 mm. x 45 m. x 2.82 mm.
@ 1.351 Kg./Rmt. lock rail and bottom rail 150 mm. x
45 mm. x 2.2 mm. at 2.376 Kg.Rmt. glazing clips 19
mm. x 17.8 mm. x 0.9 mm. @ 0.124 Kg./Rmt. with 1.5
mm. PVC SHEET , all fixtures and fastening ,
handles, tower bolt, lock, door stopper, rubber gasket
etc. complete.
a) Anodised aluminium doors
Spec.No.: As ddirected by Engineer incharge
80
BDT
UNIT
Providing and fixing in position double leaf

panneled door with fan light mounted on floor
spring, outer frame of size 100 mm. X 45 mm. of
average thickness 2mm. and weight 1.608 Kg. Per
Rmt. mechanically assembled at corner with shtter
styles of size 50 mm. x 45 mm. x 2.82 mm. @ 1.351
Kg/Rmt. top rail 50mm.x 45 mm. x 2.82 mm. @ 1.351
Kg./Rmt. lock rail and bottom rail 150 mm. x 45 mm. x
2.2 mm. @ 2.376 Kg/Rmt. glazing clips 19 mm. x 17.8
mm x 0.9 mm. @ 0.124 Kg./Rmt. with 5 mm. float
glass, all fixtures and fastening, handles, tower bolt,
lock, door stopper, rubber gasket etc. complete.
Spec. No. : As directed by Engineer incharge
128
SR.NO.
& CODE
NO.
81
BDT
Providing and fixing FRP ( Fiber reinforced plastic)

Door shutter 25 to 30 mm. Thick having properties
such as water proof resistant to termite resistant to
mild acids and chemical. The thickness of FRP shold
of of 1.5 mm.With extra reinforcement to sides,
edges, recess for alluminium fixtures and fastenings
and commercial types as per the approved design,
including alluminium , fixtures and fastenings and two
coats of synthetic acrylic emulsion paint etc.
complete (Excluding door frame)
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
Sq.m
2744.00
788.00
Sq.m
683.00
99.00
Sq.m
1036.00
262.00
Spec.No.: As ddirected by Engineer incharge
82
BDT
Providing and fixing FRP (Fiber reinforced plastic)

sheet of 1.75 mm. To 2.00 mm. Thick in any colour
for all sizes in windows including, putty, C.T. bedding,
having properties such as water proof resistant to
termite, resistant to mild acids and chemical as per
the approved design etc. complete.
Spec.No.: As directed by Engineer incharge.
83
BDT
Providing and fixing solid core flush door in single

leaf 32mm thick commercial type of exterior grade
as per detail drawing approved commercial plywood
facing on both side without glazing and ventians all
necessary beads moulding and lipping, iron oxidised
fixtures and fastening handles on both side and finish
with one coat of primer completed(without frame).
129
SR.NO.
& CODE
NO.
84
BDT
UNIT
RATES FOR
2014-15
(In Rs.)
Completed
Labour
3755.00
3504.00
598.00
598.00
Providing & fixing ISI make commercial grade factory

made hot pressed,phenol bonded solid core flush door
in single leaf of exterior grade as per detailed drawings
conforminf to I.S. 2202-1962 (Revised) with 0.8 mm thick
matt finish lamination on both faces including Indian teak
wood frame,stainless steel matt finish fixtures &
fastenings,worth iron holdfasts with brass mortise lock,with
french polish at sides,waxing etc.complete(without door
frame).(Sample to be got approved from Ex.Engineer
before use).
Sq.m
Sq.m
a) 35 mm thick
b) 32 mm thick
Spec.No.: As directed by Engineer incharge
130
BD - U : IRON WORK
SR.NO.
& CODE
NO.
1
BDU
1A
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Providing and fixing mild steel grill work for

windows, ventilators, etc. required kg/sqm
as per drawing including fixtures necessary
welding and painting with one coat of
anticorrosive paint and two coats of oil painting
complete.
a) --------- do ---------- 20 Kg/Sqm.
Sq.m
1273.00
200.00
b) --------- do ---------- 25 Kg/Sqm.
Sq.m
1536.00
200.00
a) --------- do ---------- 20 Kg/Sqm.
Sq.m
2150.00
200.00
b) --------- do ---------- 25 Kg/Sqm.
Sq.m
2432.00
200.00
c) --------- do ---------- 30 Kg/Sqm.
Sq.m
2720.00
200.00
d) --------- do ---------- 35 Kg/Sqm.
Sq.m
3000.00
200.00
Spec.No.: Bd.U.1/Page No.537

2
BDU
1A
Providing and fixing mild steel grill railing

required kg/Sqm. with teak wood hand rail
of size 75 mm x 60 mm and sill of 75 mm x 25
mm and newel posts for staircases, including
fabricating, fixtures, erecting, the grill work with
one coat of anticorrosive paint and two coats of
oil painting with approved colours and polishing
the sill, hand rail and the newel post with french
polish.
Spec.No.: Bd.U.1/Page No.537
131
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Providing and fixing mild steel grill railing

weighing required kg/Sqm. with PVC
handrail cover and newel post for staircases,
including fabricating, fixtures, drilling holes in
concrete / other surface, erecting the grill work,
necessary welding, fixing by nuts and bolts,
fixing PVC handrail cover, with one coat of
anitcorrosive paint and two coats of oil painting
with approved colour and shade, remaking the
damaged surface, cleaning, etc. complete.
a) --------- do ---------- 20 Kg/Sqm.
Sq.m
1479.00
200.00
b) --------- do ---------- 25 Kg/Sqm.
Sq.m
1748.00
200.00
c) --------- do ---------- 30 Kg/Sqm.
Sq.m
2016.00
200.00
d)--------- do ---------- 35 Kg/Sqm.
Sq.m
2286.00
200.00
a) --------- do ---------- 20 Kg/Sqm.
Sq.m
1483.00
200.00
b) --------- do ---------- 25 Kg/Sqm.
Sq.m
1754.00
200.00
Providing and fixing mild steel grill work

railing required kg/Sqm. of rectangular
hollow sections with PVC handrail covering
as per drawing including newel posts for
staircases, drilling holes in concrete/other
surface,fabricating, fixtures, erecting grill work,
necessary welding, fixing by nuts and bolts,
fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting
with approved colour and shade, remaking
good the damaged surface, cleaning etc.
complete.
132
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Sq.m
2135.00
268.00
a) --------- do ---------- 20 Kg/Sqm.
Sq.m
1406.00
0.00
b) --------- do ---------- 25 Kg/Sqm.
Sq.m
1722.00
0.00
Providing & Fixing stainless steel railing with

top and vertical pipe of 50mm dia at 0.90 m c/c
or as required and horizontal pipes of 25mm
dia in two rows, all pipes of 2 mm thick
including buffing,fabricating fixtures and
fastening including pipe base of appropriate
diameter and ball base of 75 mm dia above
one major post etc. complete (Prior approval
of sample and brand by Ex.Engineer is
necessary before use)
Providing & Fixing mild steelgrill railing of

required kg/Sqm. with 50mm dia. MS Pipe
hand rail & sill of 25mm x 3mm & newel posts
for staircases, including fabricating, fixtures,
erecting the grill work with one coat of
anticorrossive paint & two coats of oil painting
of approved colours to the sill, hand rail and the
newel post.
133
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
16.00
4.00
24.00
6.00
8.00
2.00
12.00
4.00
Providing and fixing mat finish stainless steel

lettering of various heights as directed by
enginner incharge including material, labour,
cleaning etc. complete.
A) for single letter like A, B, C etc in English
and +,,E <in `ix
1) Upto height of 30 cm
2) From 30 to 45 cm height
B) For half letters
per
cm. of
height
per
cm. of
height
`i Ex, j, =E,
+h x] <in
per
cm. of
height
per
cm. of
height
1) Upto height of 30 cm
2) From 30 to 45 cm height
134
BD - V : WATER SUPPLY AND SANITARY FITTINGS

SR.NO.
& CODE
NO.
Providing, hoisting and fixing in position of

approved make high density polyethylene UV
stabilized conforming to I.S.12701, water
storage tank with necessary connections,
testing etc. complete. (Prior approval of
sample by Ex. Engineer is necessary
before use.)
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Ltr.
7.00
2.00
Ltr.
7.00
2.00
Providing, hoisting and fixing in position

ferrocement water storage tank with 25 mm.
Thick walling with necessary connections,
sample and brand by Ex. Engineer is
necessary before use.)
Spec.No.: As directed by Engineer-in-charge.
3
BDV
5A1
Providing and laying in trenches medium

grade (type) galvanised iron pipe having
embossed ISI Mark on it, of required diameter
with screwed, sockets, joints, necessary
galvanised iron fittings such as sockets, back
nuts, elbows, bends, tees, reducers,
enlargers, plugs, clamps etc. including
necessary excavation, back filling, fixing with
clamps, testing etc. complete. (Prior approval
of sample and brand by Ex. Engineer is
(i)
15 mm dia.
Rmt.
250.00
59.00
(ii)
20 mm dia.
Rmt.
288.00
59.00
(iii) 25 mm dia.
Rmt.
337.00
59.00
(iv) 32 mm dia.
Rmt.
368.00
63.00
(v)
40 mm dia.
Rmt.
441.00
63.00
(vi) 50 mm dia.
Rmt.
572.00
63.00
(vii) 75/80 mm dia.
Rmt.
877.00
70.00
(viii) 100 mm dia.
Rmt.
1204.00
70.00
Spec.No.: Bd.V.5/Page No.551

135
SR.NO.
& CODE
NO.
4
BDV
5
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Providing and fixing on walls/ ceiling/floors,

medium grade G.I. pipe (type) having
embossed ISI Mark on it, of required diameter
with screwed sockets, joints, necessary
galvanised iron fittings such as sockets,back
nuts,elbows, bends, tees, reducers, enlargers,
plugs, clamps etc.including necessary drilling
holes in walls, slabs etc. and remaking good
the demolished portion to restore the same in
original condition neatly and providing and
applying anticorrosive primer and two coats of
oil painting, testing, etc.complete.(Prior
approval of sample by Ex.Engineer is
(i) 15 mm dia.
Rmt.
222.00
49.00
(ii) 20 mm dia.
Rmt.
266.00
49.00
(iii) 25 mm dia.
Rmt.
310.00
49.00
(iv) 32 mm dia.
Rmt.
342.00
54.00
(v) 40 mm dia.
Rmt.
413.00
54.00
(vi) 50 mm dia.
Rmt.
544.00
54.00
(vii) 80 mm dia.
Rmt.
822.00
57.00
136
SR.NO.
& CODE
NO.
5
BDV
60A
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Providing and fixing in position ultra violet

stabilised UPVC plumbing pipe of specified
outer diameter of required standard thickness
conforming to I.S. 4985 including necessary
fittings conforming to I.S. 7834 such as PVC
bends, tees, reducers, clamps, plugs etc.
including necessary excavation trench filling,
necessary drilling holes in walls, slabs etc. and
making good the surface complete.(For 10
kg/Sq.cm Pressure) (Prior approval of
sample and brand by Ex.Engineer is
necessary before use.
(i) 15 mm dia.
Rmt.
83.00
43.00
(ii) 20 mm dia.
Rmt.
104.00
43.00
(iii) 25 mm dia.
Rmt.
113.00
43.00
(iv) 32 mm dia.
Rmt.
143.00
43.00
(v) 40 mm dia.
Rmt.
178.00
45.00
(vi) 50 mm dia.
Rmt.
203.00
45.00
(vii) 63 mm dia.
Rmt.
248.00
45.00
No.
226.00
34.00
6
BDV
8
Providing and fixing 15 mm dia. Screw down

bib/stop tap of brass including necessary
sockets,
union
nut,
testing
etc.
complete.(Prior approval of sample and
brand by Ex. Engineer is necessary before
use.)
137
SR.NO.
& CODE
NO.
7
BDV
8
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour

bib cock of symet type including necessary
sockets, union nut, testing etc. complete.
(Prior approval of sample by Ex.Engineer is
(a) Bib cock Standard
No.
190.00
28.00
(b) Bib cock Fancy
No.
316.00
29.00
(c )Bib cock Long body
No.
338.00
28.00
(d) Bib cock piller cock
No.
335.00
29.00
No.
374.00
39.00
No.
399.00
39.00
No.
302.00
29.00

8
BDV
8A
Providing and fixing 20 mm dia screw down

sockets, union nut, testing etc. complete.
(Prior approval of sample and brand by
Ex.Engineer is necessary before use.)
9
BDV
8B

sockets,
union
nut,
testing
etc.
use.)
10
BDV
9
Providing and fixing screw down 15 mm dia.

metre wheeled stop tap of brass including
necessary sockets, union nut, testing etc.
complete. (Prior approval of sample and
brand by Ex.Engineer is necessary before
use.)
138
SR.NO.
& CODE
NO.
11
BDV
9
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Providing and fixing stop cock of symet type

of specified dia. including necessary sockets,
union nut testing etc. complete. (Prior
approval of sample and brand by Ex.
Engineer is necessary before use.)
(a) Stop cock 15 mm (Male/Female)
No.
204.00
29.00
(b) Angle Stop cock 15 mm
No.
220.00
28.00
(c )Conceal Stop cock 15 mm
No.
278.00
28.00
(d) Stop cock 20 mm (Female)
No.
234.00
28.00
(e) Conceal Stop cock 20 mm
No.
299.00
28.00
No.
No.
No.
No.
No.
No.
No.
392.00
468.00
577.00
662.00
1071.00
1612.00
2457.00
38.00
38.00
38.00
44.00
44.00
52.00
52.00
No.
307.00
31.00
No.
177.00
28.00

12
BDV
9A
13
BDV
12
Providing and fixing screw down required

dia. wheeled stop tap of brass including
necessary sockets, union nut, testing etc.
use.)
a) 20 mm dia
b) 25 mm dia
c) 32 mm dia
d) 40 mm dia
e) 50 mm dia
f) 65 mm dia
g) 80 mm dia
Providing and fixing 100 mm dia. Chromium
plated brass showers rose to 15 mm dia.
Supply pipe including necessary bend and
socket, testing etc. complete. (Prior approval
(a)
------ do ------ Swivelling in symet
shower
139
SR.NO.
& CODE
NO.
14
BDV
14
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
194.00
27.00
(a) 15 mm dia.
No.
173.00
31.00
(b) 15 mm dia. push cock with nipple
No.
198.00
31.00
(c) 20 mm dia.
No.
205.00
31.00
Providing and fixing 25 mm diameter

concussion push button type brass/ gun
metal self-closing tap including necessary
No.
273.00
31.00
No.
1804.00
464.00
Providing and fixing 15 mm diameter

concussion push button type brass/ gun
metal self closing tap including necessary
Spec.No.: Bd.V.14./Page No.557
15
BDV
14
16
BDV
14A
Providing and fixing push cock (Self closing

tap) symet type of specified diameter
including necessary socket, testing etc.
use.)

17
BDV
18
Providing and fixing fittings and accessories

such as ball cock, over flow pipe with
mosquito proof coupling, scour pipe with plug,
manhole with cover and locking arrangement,
connecting pipes and embedding intake and
outflow pipes into the R.C.C. water reservoir.
140
SR.NO.
& CODE
NO.
18
Providing and fixing chromium plated wall

mixer cock of heavy duty without washer
with chromium plated showers with/without
telephonic arrangement including necessary
supply pipes 15 mm dia. and fittings like
socket union, nuts, bends, valves, reducers,
including necessary drilling holes in walls,
slabs etc and remaking good the demolished
portion to restore the same in original
condition neatly and cleaning the site after
completion of work, testing etc. complete.
(S.E.'s permission to be obtained before
execution of this item) (Prior approval of
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Each
2422.00
460.00
No.
187.00
48.00
No.
525.00
50.00
19
BDV
84
Providing and fixing 12 mm dia. Ball cock

medium type with PVC float including
sockets and necessary fittings and tested as
per municipal requirement, testing etc.
use.)
20
BDV
83
Providing and fixing 40 mm dia. Ball cock

medium type with PVC float including
sockets and necessary fittings and tested as
per municipal requirements testing etc.
use.)
141
SR.NO.
& CODE
NO.
21
BDV
74
22
BDV
77
Providing and fixing 1st class white glazed

earthenware "Orissa type" W.C.Pan 600 x
400 mm size including 'P'or 'S'trap UPVC soil
and vent pipe upto the outside face of the wall,
1:5:10 cement concrete bedding, inlet pipe
with stop tap, bracket for fixing the cistern, 32
mm dia. UPVC flush pipe with fitting and
clamps, 20 mm dia. UPVC over flow pipe with
mosquito proof coupling, chain and pulley,
painting of the exposed pipe and cutting and
making good walls and floor, testing etc.
use.)
(a) With 10 litre fibre high level flushing
cistern with fittings
(b).. Do without flushing cistern with
flush cock and necessary fittings
Providing and fixing 1st class "Orissa Type"
Colour Glazed earthenware 600 x 400 mm.
W.C. PAN including `P' or `S' trap, UPVC soil
and vent pipe upto the out side face of wall,
including 100 mm dia. UPVC plug bend, inlet
pipe with stop tap, brackets, 32 mm dia.
UPVC flush pipe with fittings and clamps, 20
mm dia. UPVC over flow pipe with mosquito
proof coupling, UPVC chain and pulley,
painting to cistern and exposed pipes, cutting
and making good to the walls and floors,
(a) With 10 litre UPVC high level flushing
cistern with fittings.
(b) ----- do ------ without flushing cistern
with flush cock and necessary fittings.
142
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
3825.00
788.00
No.
3241.00
641.00
No.
4004.00
710.00
No.
3493.00
601.00
SR.NO.
& CODE
NO.
23
BDV
57
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Providing and fixing European type white

glazed earthenware W.C.PAN with UPVC
seat and lid with chromium plated brass
hinges and rubber buffers including UPVC and
vent pipe upto the outside face of wall, pipe
and stop tap brackets for fixing cistern 32 mm
dia. UPVC flush pipe with fittings and clamps,
20 mm dia. UPVC overflow pipe, mosquito
proof couplings, G.I. chain and pulley, cutting
and making good to the walls and floors,
(a) With10 litre enamelled low level
flushing cistern with fittings.
(b) ------ do ------- with water jet and fittings
No.
3479.00
565.00
No.
3808.00
593.00
(c) ------ do ------- without flushing cistern

with flush cock and necessary fittings
(d) ------ do ------- without flushing cistern
with water jet and fittings
No.
2972.00
501.00
No.
3314.00
540.00
143
SR.NO.
& CODE
NO.
24
BDV
56
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour

glazed earthenware W.C. Pan with UPVC
hinges and rubber buffer including UPVC, soil
and vent pipe up to the outside face of the wall
and 100 mm dia. UPVC plug bend, 32 mm
dia. UPVC flush pipe with fittings and clamps,
20 mm dia. UPVC overflow pipe with mosquito
proof coupling chain and pulley, painting of the
cistern and exposed pipe and cutting and
making good to the walls and floors, testing
etc. complete. (Prior approval of sample and
use.)
(a) With 10 litres UPVC low level flushing
cistern.
No
3500.00
590.00
No.
3920.00
622.00
(c) -------- do ------ Without Flushing tank

No.
3572.00
498.00

No.
3564.00
542.00
144
SR.NO.
& CODE
NO.
25
BDV
21
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Providing and fixing European type coloured

glazed earthenware W.C PAN with Bekelite
hinges and rubber buffers including UPVC soil
and vent pipe upto the outside face of wall, 32
mm. Dia. UPVC flush pipe with fittings, and
clamps 20 mm dia. UPVC over flow pipe with
mosquito proof couplings, painting to exposed
pipe and cutting and making good to the wall
and floor, testing etc. complete. (Prior
approval of sample and brand by
(a) With 10 litre UPVC high level TANK

flushing cistern.
No.
3699.00
590.00
(b)
------ do ------- with water jet and
fittings
No.
4040.00
622.00
(c)
-------- do ------ Without Flushing
cistern with flush cock and necessary
fittings.
(d)
------ do ------- without flushing
cistern with water jet and fittings
No.
3398.00
498.00
No.
3728.00
542.00
145
SR.NO.
& CODE
NO.
26
BDV
75

glazed earthernware water closet with
syphonic trap with UPVC seat and lid with
chromium plated brass hinges including UPVC
soil and vent pipe upto the outside face of the
wall including 100 mm dia. UPVC plug bend,
inlet pipe, stop tap etc. all fittings, cutting and
making good to the walls and floor, testing etc.
use.)
(a) With syphonic low level 10 litres UPVC
cistern.
(c) -------- do ------ Without Flushing cistern
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
3564.00
542.00
No.
3927.00
575.00
No.
3182.00
456.00
No.
3517.00
493.00
No.
4036.00
580.00
No.
3650.00
528.00
27
BDV
76
Providing and fixing anglo Indian type white

earthenware W.C.Pan with UPVC seat and
lid with chromium plated brass hinges
including UPVC soil and vent pipe upto the
outside face of the wall and 100 mm dia.
UPVC plug bend, 32 mm dia. PVC flush pipe
with fittings and clamps,20 mm dia. PVC over
flow pipe with mosquito proof coupling,
G.I.chain and pulley painting of cistern and
exposed pipe and cutting and making good to
the walls and floor, testing etc. complete.
(a) With 10 litre UPVC high level flushing
cistern.
(b) -------- do ------ Without Flushing cistern
146
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
28
BDV
23
Providing
and
fixing
white
glazed
earthenware full stall type Urinal without
cistern, stop tap with inlet pipes and 32 mm
dia. UPVC flush pipe, with fitting and flushing
arrangement including UPVC soil pipe, UPVC
trap and soil pipe connection upto the outside
face of the wall, making good to damaged
surface testing etc. complete. (Prior approval
No.
4893.00
528.00
29
BDV
23A
Providing and fixing coloured glazed

earthenware full stall type Urinal without
flushing cistern with inlet pipes, UPVC flush
pipe, stop tap 32 mm dia. With fittings, UPVC
soil pipe, UPVC trap and soil pipe connection
upto the outside face of the wall, making good
to damaged surface, testing etc. complete.
No.
4948.00
528.00
No.
2246.00
393.00

30
BDV
110
Providing
and
fixing
white
glazed
earthenware semi stall type urinals without
cistern, with inlet pipes stop tap, UPVC flush
pipe with fittings and flushing arrangement
including UPVC soil pipe, UPVC trap and soil
pipe connection upto outside face of wall,
making good the damaged surface, testing
use.)
147
SR.NO.
& CODE
NO.
31
BDV
111
Providing and fixing white glazed porcelene

ware lipped flat back or corner type urinals
without flushing cistern, including glazed soil
inlet pipes lead trap connection , UPVC flush
pipe with fittings and flushing arrangement,
including PVC soil pipe, UPVC trap and soil
pipe connection upto the outside face of the
wall, making good the damaged surface,
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
1626.00
433.00
No.
2280.00
433.00
No.
2030.00
295.00
32
BDV
24
Providing
and
fixing
white
glazed
earthenware urinal squatting type without
cistern with fitting, inlet pipes, stop tap, 32 mm
dia. UPVC flush pipe with fittings and spreader
arrangement including UPVC soil pipe, UPVC
trap, soil pipe connection upto the outside face
of the wall, making good the damaged
surface, testing etc. complete. (Prior
33
BDV
26
Providing
and
fixing
white
glazed
earthenware lipped flat back corner type
Urinal without flushing cistern, inlet pipe with
stop tap, 32mm diameter UPVC pipe with
fittings, including UPVC soil pipe, trap and soil
pipe connection upto the outside face of wall,
use.)
148
SR.NO.
& CODE
NO.
34
BDV
28
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
2596.00
433.00
Rmt.
129.00
37.00
a) With cold water piller tap
No.
2081.00
256.00
b) With cold and hot water piller tap
No.
2405.00
276.00
Providing and fixing a group of two white

glazed earthenware lipped flat back type
Urinal without flushing cistern, with inlet pipe
and stop tap, UPVC flush pipe with fittings
including UPVC soil pipe, UPVC trap and soil
pipe connections upto the outside face of the
wall, making good the damaged surface,
Spec.No.: Bd.V. 28/Page No. 565
35
BDV
29
Providing and laying 100 mm dia. half round

white glazed earthenware pipes in 1:5:10
cement concrete bedding including bends,
use.)
36
BDV
30B
Providing
and
fixing
white
glazed
earthenware Wash Hand Basin of size 45
cm x 30 cm, brackets, rubber plugs and brass
chain, stop tap, chromium plated bottle trap
and necessary pipe connection including
UPVC waste pipe and trap up to the out side
face of the wall, making good the damaged
149
SR.NO.
& CODE
NO.
37
BDV
30C
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour

earthenware Wash Hand Basin of 45cm x
30cm, brackets, rubber plugs and brass chain,
stop tap, chromium plated bottle trap and
necessary pipe connection including UPVC
waste pipe and trap up to the outside face of
the wall, making good the damaged surface,
No.
2310.00
255.00
b)With cold and hot water piller tap
No.
2757.00
276.00
Providing
and
fixing
white
glazed
earthenware Wash Hand Basin of 55 cm x
40 cm size, brackets, rubber plugs and brass
and necessary pipe connections including
UPVC waste pipe and trap upto the out side
approval of sample and brand by Ex.
Engineer is necessary before use.)
No.
2184.00
266.00
No.
2546.00
284.00
Spec.No.: Bd.V.30/Page No. 565

earthenware Wash Hand Basin of 55 cm x
40 cm size, brackets, rubber plugs and brass
and necessary pipe connection including
UPVC waste pipe and trap upto the outside
No.
2460.00
276.00
No.
2790.00
284.00

38
BDV
30
39
BDV
30A
150
SR.NO.
& CODE
NO.
40
Providing and fixing moulded counter type

wash hand basin including pillar tap, cold and
hot water mixer tap, brackets, rubber plug and
brass chain, stop tap, and necessary pipe
connections including, chromium plated bottle
trap, UPVC waste pipe and trap upto out side
face of the walls, making good the damaged
surface, testing etc. complete. (S.E's prior
permission
to
be
obtained before
execution of this item.) (Prior approval of
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Each
10602.00
1182.00
Per
No.
1018.00
188.00
No.
1890.00
216.00

41
Providing and fixing high level 10 Lit

capacity PVC cistern with fittings inlet PVC
pipe with stop tap, brackets for fixing the
cistern, 32 mm dia. PVC flush pipe with fittings
and clamps 20 mm dia. PVC overflow pipe
with mosquito proof coupling, galvanized iron
chain and pulley, painting if ordered to cistern
pipe etc. and cutting and making good the
damaged walls and testing etc. complete.
Spec. No.: As directed by Engineer- in-charge.
42
BDV
31A
Providing
and
fixing
white
glazed
earthenware sink 450mm x 300mm x
200mm including all connections of the G.I.
supply and UPVC waste pipe and trap upto
the outside face of the wall, cold water
chromium plated screw down bib tap, rolled
steel or C.I. brackets, rubber plug with chain
and stop tap, making good the damaged
surface, chromium plated bottle trap, testing
use.)
151
SR.NO.
& CODE
NO.
43
BDV
31
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
2843.00
235.00
Providing and fixing Strainless Steel sink of

size 600 mm x 450 mm x 250 mm ( 1 mm
thick) UPVC waste pipe upto outside face of
wall, or upto nahani trap cold water chromium
plated screw down bib tap, rubber plug and
brass chain, making good the damaged
surface, etc. complete. (Prior approval of
Spec.No.: Bd.V.30/Page No. 565
Providing and fixing 8 cm C.I. Nahani Trap
(long arm) including symet grating, bend,
connecting piece of C.I. pipe upto the outside
No.
2861.00
334.00
No.
711.00
110.00
Providing and fixing 10cm C.I.Nahani Trap

(long arm) including symet grating, bend,
connecting piece of C.I.pipe upto the outside
No.
797.00
148.00
Providing
and
fixing
white
glazed
earthenware sink 600 mm x 450 mm x 200
mm including all connections of the G.I.
supply and UPVC waste pipe and trap upto
the outside face of the wall, cold water
chromium plated screw down bib tap, rolled
steel or C.I. brackets, rubber plug with chain
and stop tap, bottle trap, making good the
damaged surface, testing etc. complete.
44
BDV
30D
45
BDV
32
46
BDV
32A
152
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
47
Providing and fixing 8 cm. Rigid PVC. Nahani

Trap including P.V.C. grating, bend,
connecting piece of UPVC pipe up to the
outside face of the wall, making good the
damaged surface, testing etc. complete.
No.
246.00
84.00
48
Providing and fixing 10 cm Rigid PVC Nahani

Trap including PVC grating, bend, connecting
piece of P.V.C.pipe of required diameter, pipe
up to the outside face of the wall, making good
the holes and repairs, testing etc. complete.
No.
336.00
88.00

49
BDV
38
Providing and fixing 15 cm x 10 cm salt

glazed stoneware gully trap in cement
concrete 1:4:8 outside the building including
symet grating in the sink, connecting glazed
stoneware pipe, brick masonry chamber with
R.C.C. lid and Symet grating for the gully trap,
No.
788.00
112.00
50
BDV
130
Providing and fixing in position 40 mm. Heavy

type
alkathene
pipe
for
drainage
connections including cutting, boring holes in
wood work or masonry if necessary, making
connections of pipe to sink and giving test for
no leakages, making good the damaged
surface etc. complete. (Prior approval of
sample by Ex.Engineer is necessary before
use.)
Rmt.
62.00
22.00
153
SR.NO.
& CODE
NO.
51
BDV
36A
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Rmt.
Rmt.
Rmt.
201.00
254.00
282.00
59.00
102.00
115.00
Rmt.
Rmt.
Rmt.
265.00
396.00
593.00
39.00
41.00
55.00
Providing and fixing asbestos cement soil /

vent / waste pipe of required diameter with
necessary fixtures and fittings such as bends,
tees, single junction, double junction, slotted
vent, offsets on walls or in the ground
including filling joints with cement mortar 1:2,
painting with red lead oil base coat and two
coats of anticorrosive paint including fixing
pipes on walls by means of nails, driven
through wooden lugs in wooden holder
battens, fixed with concrete block and
supported on ground floor by C.C. 1:2:4, block
of 30 x 30 cm size, testing etc. complete.
(a) 75 mm dia. Pipe
(b) 100 mm dia. Pipe
(c)150 mm dia. Pipe
52
UNIT
Providing and fixing UPVC SOIL / VENT /

WASTE SWR pipe of required diameter
conforming to I.S.-13592, and I.S.-4985 to
withstand
continous
internal
hydroulic
pressure of 4 kg/cm2 including necessary
fixtures and fittings, such as bends, tees,
single junctions, double junctions and joining
with rubber rings and lubricants, on wall by
means of clips or in ground including
necessary excavation, laying refilling, trench
(a) 75 mm dia. Pipe
(b) 110 mm dia. Pipe
(c) 160 mm dia. Pipe
154
SR.NO.
& CODE
NO.
53
Providing and fixing in position unplasticized

poly venyl-chloride (UPVC) ultra voilet rays
stabilised 110 mm outer diameter rain
water SWR pipe conforming to I.S. 4985 and
I.S.13592,including necessary fittings, such as
PVC grating, bends, with door, PVC clamps,
horse shoes at bottom, rubber ring and
making connections water tight with solvent,
cement including making holes in masonary
concrete redoing the same in C.M. 1:3, curing,
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Rmt.
243.00
40.00
Rmt.
Rmt.
443.00
83.00
565.00
102.00
No.
3330.00
532.00
No.
3789.00
611.00

54
BDV
41
Providing and Laying concrete pipes of

I.S.NP.2 class of required diameter in proper
line, level and slope including necessary
collars, laying, fixing with collars in cement
mortar 1:1 and refilling the trench etc.
complete. ( Excluding Excavation )
(a ) 225 mm dia.
(b) 300 mm dia.
55
BDV
43
Providing and constructing Brick Masonry

Inspection Chamber 60 cm x 45 cm x 60 cm
including 1:4:8 cement concrete foundation,
1:2:4 cement concrete channels, Brick
Masonry, plastering from inside and airtight
R.C.C. lid with frame fixed in cement concrete,
curing, testing etc. complete.
a) Without Reinforced cement concrete raft
in B.C. soil area including cost of
reinforcement
b) With Reinforced cement concrete raft in
B.C. soil area including cost of
reinforcement
155
SR.NO.
& CODE
NO.
56
BDV
43A
57
BDV
44
58

Inspection Chamber 90 cm x 45 cm x 60 cm
including 1:4:8 cement concrete foundation,
1:2:4 cement concrete channels, Brick
Masonry, plastering from inside and airtight
R.C.C.lid with frame fixed in cement concrete,
curing, testing etc. complete.
a) Without Reinforced cement concrete raft
in B.C. soil area including cost of
reinforcement
b) With Reinforced cement concrete raft in
reinforcement
Spec.No.: Bd.V.43./Page No.574
intercepting trap Chamber 90cm x 45cm
including 1:4:8 C.C. foundation 1:2:4 C.C.
channels/salt glazed stoneware intercepting
trap with rodding pipe set in 1:4:8 cement
concrete block, brick masonry plastering
inside and outside, R.C.C.lid with frame fixed
in cement concrete, curing, testing etc.
complete.
(a) with Reinforced cement concrete raft in
reinforcement
Providing and fixing in postion unplasticized
polyvinyl chloride (UPVC) ultra violet
stabilized 110 mm outer diameter cowl
dome conforming to I.S.4985 including
making joints with solvent cement etc.
complete.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
4999.00
689.00
No.
5924.00
750.00
No.
5345.00
719.00
No.
5591.00
788.00
No.
43.00
7.00
No.
542.00
89.00
59
BDV
Providing and fixing reinforced cement

concrete cover of 7.5cm thick over manhole
and inspection chamber including mild steel
reinforcement, curing testing etc. complete.
(1.15 m x 0.6 m. size) (Prior approval of
156
SR.NO.
& CODE
NO.
60
BDV
Providing and fixing reinforced cement

concrete round cover of 7.5 cm thick over
manhole and inspection chamber including
mild steel reinforcement etc.complete. (1.25 m
dia.) (Prior approval of sample and brand
by Ex.Engineer is necessary before use.)
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
706.00
109.00
No.
909.00
316.00
61
BDV
46
Providing soak pit of size 120 cm x 120 cm x

120 cm including excavating and filling with
brick bats as per drawing etc. complete.
62
BDV
126
Providing effluent channel 1.00 M. x 1.00 M.,

filling with boulder 6 cm. to 20 cm. Size, hand
packing and spreading murum at top etc.
complete.
Rmt.
341.00
135.00
63
BDV
59
Providing and fixing 450 mm x 550 mm size

superior type mirror with 16 mm dia. Nickel
plated towel rod etc. complete. (Prior
No.
465.00
38.00
No.
172.00
40.00
64
BDV
67
Providing and fixing chromium plated towel

rod 16 mm dia. And 75cm. in length including
all accessories complete. (Prior approval of
157
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
65
BDV
86
Providing and fixing Glass Shelf 125 mm.

Wide and 600 mm. long with necessary
chromium plated brackets, providing T.W.
gutties etc. complete.
No.
116.00
48.00
66
BDV
39
P-573
Providing and fixing 100 mm dia. Salt Glazed

Stoneware pipe including fittings such as
bends, tees, single junctions, double junctions,
laying, jointing (excluding excavation and
refilling the trenches) etc. (Cement: 1.87 kg
per m)
Rmt.
197.00
84.00
Rmt.
276.00
67.00
Rmt.
316.00
68.00
67
BDV-39 Stoneware pipe including fittings such as
P-573 bends, tees, single junctions, double junctions,
refilling
the
trenches)
etc.complete
(Cement: 2.24 kg per m)
68
BD/V-39 Stoneware pipe including fittings such as
P-573 bends, tees, single junctions, double junctions,
refilling the trenches) etc. (Cement: 4.04 kg
per m)
158
SR.NO.
& CODE
NO.
69
BDV
35
70
BDV
35A
71
BDV
65
Providing and fixing 100 mm. Diameter cast

iron centrifuguly spurn soil/ vent/ waste
pipes with necessary fixtures and fitting such
as bends, tees, single junction, double
junction, slotted vent offsets on walls or in the
ground including filling joints with lead with
read lead oil paint coat and two coats of
anticorrosive paint including fixing the pipe on
walls by means of nails driven through lugs in
wooden holder/battens and supported on
ground floor by C.C. 1:2:4 of 30 cm. x 30 cm.
size blocks complete.
Spec. No.: BD.V.36 Page No. 571.
Providing and fixing 75 mm. Diameter cast
iron centrifuguly spurn soil/ vent/ waste
pipes with necessary fixtures and fitting such
as bends, tees, single junction, double
junction, slotted vent offsets on walls or in the
ground including excavation, laying, refilling
the trench and painting the exposed pipe with
oil paint complete.
Spec. No.: BD.V.35 Page No. 571.
Providing and fixing Indian type white glazed
earthenware 635 mm water closet pan
including 'S' trap with earthenware foot rests,
UPVC soil and vent pipe upto outside face of
the wall 1:2:4 brick bat lime concrete bedding
without flushing tank and its accessories
use.)
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Rmt.
958.00
118.00
Rmt.
799.00
110.00
No.
1396.00
410.00
No.
1472.00
404.00
Spec. No.; As directed by Engineer-in-charge.
72
BDV
66
Providing and fixing Indian type white glazed

earthenware 675 mm water closet pan
including 'S' trap with earthenware foot rests
UPVC soil and vent pipe upto outside face of
the wall 1:2:4 brick bat lime concrete bedding
without flushing tank and its accessories
use.)
Spec. No.: As directed by Engineer in-charge.
159
SR.NO.
& CODE
NO.
73
BDV
91
Providing and fixing white glazed pedestal

for W.H.B. of approved size and quality
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
941.00
74.00
No.
1025.00
74.00
No.
1061.00
985.00
Spec. No.: As directed by Engineer- in-charge.

74
BDV
92
Providing and fixing colour glazed pedestal

for W.H.B. of approved size and make and
quality testing etc. complete. (Prior approval
of sample and brand by Ex. Engineer is
Spec.No.: As directed by Engineer-in-charge.
75
BDV
131
Cleaning septic tank upto 1.5 Cu.m. capacity

or equivalent testing etc. complete.
Spec. No. : As directed by Engineer- incharge.
76
BDV
132
Cleaning septic tank more than 1.5 Cu.m.

capacity, add for each additional Cu.m.
capacity.
Cum.
234.00
195.00
77
Replacement of internal fittings of PVC

cisterns including removing old fittings etc.
complete.
No.
277.00
117.00
160
BD-W MISCELLANEOUS
(a) ANTITERMITE AND PEST CONTROL
SR.NO.
&
CODE
NO.
UNIT RATE FOR 2014-15

( In Rs.)
Completed Labour
15.75
8.54
No.
68.25
10.98
No.
120.75
8.54
Providing and fixing Net-lon or equivalant type Sq.m.

extruded mosquito proof netting properly cut to the
size and stiched with Nylon thread and squarely fixed
with 20 mm vetrohood and loop fastening system for
removal and refixing complete as per drawing and as
directed by Engineer- in - charge. (Prior permission of
S.E is necessary before inclusion of item in estimate)
378.00
71.98
Providing general pest control services to the Sq.m.

building to control the nuisance of the cockcroaches,
lizards, bedbugs and other insects etc. with four
operations in a year and monthly check up.
Providing general pest control services to small size

inspection chambers to control nuisance of the
cockcroaches during the year with monthly check up.
Providing general pest control services to big size

inspection chamber to control nuisance of the
cockcroaches, etc. complete during years with monthly
check up.
161
SR.NO.
&
CODE
NO.

( In Rs.)
Completed Labour
Sq.m
63.00
Providing Preconstruction Antitermite treatment by Sq.m.

treating the back fill in immediate contact with
foundation at the rate of 5 litres of an emulsion
concentrate of
one percent concentration of
CHLORPYRIFOC 20% EC ISI approved conforming to
I.S.8944 per square metre of vertical surface area by
high volume sprayer with ten years guarantee bond as
per I.S. 6313 (Part II) of 1971.
113.40
Providing Preconstructional Antitermite treatment by

treating the bottom surface and the sides of
excavation at the rate of 3 litres of emulsion concentrate
of one percent concentration of CHLORPYRIFOC 20%
EC, ISI approved conforming (I.S.8944), (i.e by diluting 5
ltr. of chlorpyrifoc 20% EC, with 95 ltr. of water) and
spraying by high volume sprayer on one square metre
surface area with ten years guarantee bond as per
I.S.6313 (Part II 1971) .

7
Providing Preconstructional Anti- termite treatment Sq.m.

by treating the top surface of plinth filling at the rate
of 5 litres of emulsion concentrate of one percent
concentration of
CHLORPYRIFOC 20% EC ISI
approved conforming (I.S.8944) to per square metre of
surface area by high volume sprayer with ten years
guarantee bond as per I.S.- 6313 (Part III) of 1971.
162
113.40
SR.NO.
&
CODE
NO.

( In Rs.)
Completed Labour
Sq.m.
152.25
Providing exhaustive Antitermite treatment to the Sq.m.

wooden frames by drilling 6 mm holes at four corners or
as directed on one side, at downward angle of 45 degree
at junction of wood work and masonry and in between,
as instructed by Engineer, as per requirement, at the
rate of 75 ml of chlorodane of 58 percent emulsion
concentrate and filling with putty, etc. with two years
guarantee bond as per I.S. 6313 (Part III) of 1971.
31.50
Providing Postconstructional Anti- termite treatment

to the soil along the external wall by punching holes of
1.2 to 1.5 cm diametre about 30 to 60 cm deep at 15 cm
centre to centre as close to the wall as possible and
inject one percent concentration of CHLORPYRIFOC
20% EC ISI approved conforming (I.S.8944)at the rate of
7.5 litre emulsion concrete per square metre and sealing
the same with proper filling with two years guarantee
bonds as per I.S.6313 (Part III) of 1971.

10
Providing exhaustive Antitermite treatment to the

wooden beams by injecting antitermite chemical
emulsion at four corners or as directed, on one side at
downward angle of 45 degree at wooden joints and
masonry and in between as instructed by engineer, as
per requirement at the rate of 80 ml of chlorodane of 58
percent emulsion concentrate per joint or more as per
requirement and filling with putty, etc. with two years
guarantee bond as per I.S.- 6313(Part III) of 1971.
163
No.
21.00
SR.NO.
&
CODE
NO.

( In Rs.)
Completed Labour
11
Providing post constructional exhaustive Antitermite

treatment to the sides of flooring by injecting one
percent of chlorodane emulsion concentrate at the rate
of 50 ml per hole of 6mm diameter drilled at a distance of
30 cm centre to centre or more as per requirement and
sealing the same with proper filling with two years
guarantee bond as per I.S. 6313 (Part III) of 1971.
No.
8.40
Rmt.
26.25

12
Providing post constructional exhaustive Antitermite

treatment around the periphery by excavating
trenches of 20 cms width and exposing the sides of
columns and plinth beams upto a depth of 300 mm by
injecting one percent of cholordane emulsion
concentrate at the rate of 2.25 litres per running metre or
more as per requirement with two years guarantee bond
as per I.S.6313 (Part III) of 1971.
164
(b) GUNITING
SR.NO.
&
CODE
NO.
1
BDW
2A
Guniting by dry mix process as per I.S. 9012 (1978) to

ceilings, soffit & sides etc. in C.M. 1:3 proportion with
admixture (guniting aid ie microsilica or sifumex-100 D
powder) as per specified thickness under pressure 2.1
kg to 2.8 kg per Sq. cm. including forms, scaffolding,
curing for 14 days etc. complete. (Excluding welded
mesh reinforcement)

(In Rs)
Completed
Labour
Sq.m
Sq.m
Sq.m
430.00
600.00
725.00
58.00
77.00
96.00
Guniting by dry mix process as per I.S. 9012 (1978) to Sq.m.

ceilings,soffit & sides etc. in C.M. 1:3 proportion with
admixture (guniting aid ie microsilica or sifumex-100 D
powder) and 50 mm thick under pressure 2.1 kg to 2.8
kg per Sq. cm. including welded mesh of size 75 mm x
75 mm x 10 guage as reinforcement with fixing by
anchor bolts with forms, scaffolding, curing for 14 days
etc. complete.
1040.00
100.00
300.00
35.00
215.00
44.00
(i) ------ do ------ 25 mm thick

(ii) ------ do ------ 40 mm thick
(iii) ------ do ------ 50 mm thick
Spec.No.: Bd.W.2./Page No.582
2
BDW
43

3
Providing and applying approved epoxy resin before Sq.m.

guniting to have perfect bond between old concrete or
masonry and guniting by nylon brushes scaffolding
labour etc. complete.
Providing and fixing welded mesh fabric for guniting Sq.m.

of mesh size 75 mm x 75 mm and 10 gauge thick
including scaffolding etc. complete.
165
SR.NO.
&
CODE
NO.

(In Rs)
Providing and applying sand blasting to concrete Sq.m

surface to clean all loose,rust,dirt by mechanical means
of compressor,blasting gun etc complete.
Completed
Labour
140.00
23.00
255.00
32.00

6
Providing and applying two coats of anticorrosive Sq.m

epoxy phenolic IPNET RB rebar protective system on
exposed reinforcement and concrete penetrating
corrosion inhibitor EPCO KP-100 or equivalent over
adjoining concrete surface including chipping out loose
concrete,cleaning the surface with wire brush etc.
complete.
166
(c) FENCING WORK

SR.NO.
&
CODE
NO.
1
BDW
3A
Providing and erecting 1.2 metre high wire

fencing with five rows of barbed wire
supported on M.S. Angles (50 mm x 50 mm x
6mm) at 2.5 m. centre to centre including
excavating pits for foundation, fixing posts in
cement concrete 1:4:8 of size 45 x 45 x 45
cm., fastening the wire and painting the M.S.
Angles with one coat of red lead primer and
two coats of painting etc. complete.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Rmt.
392.00
60.00
(a) ------- " ----------- with precast concrete

poles in M-15 concrete.
Spec.No.: Bd.W.3/Page No.583
Rmt.
382.00
60.00
2
BDW
6A
Providing and fixing mild steel grill gate as

per the detailed drawing including hinges,
locking arrangements and painting in three
coats of oil paint of approved colour and
shade etc. complete. (weight 18 kg. to 20 kg.
Per Sq.m.)
Sq.m
1660.00
135.00
3
BDW
6
Providing and fixing mild steel grill gate with

angle iron frame 65 mm x 65 mm x 10 mm
with iron bars at 150 mm C/C and diagonal
flats as per the detailed drawing including
hinges, pivot blocks locking arrangement
welding, revetting with oil painting in three
coats of approved colour shade. (Weight of
gate 35 kg/Sq.m.)
Spec.No.: Bd.W.6/Page No.585
Sq.m.
2001.00
115.00
167
SR.NO.
&
CODE
NO.
Providing and erecting 1.20 m. high chain

link fencing with chain link having hole size
65 mm x 65 mm supported on M.S.angle post
of size 50 mm x 50 mm x 6 mm with M.S. flat
of size 50 mm x 5 mm for fastening chain link
with post angle at 2.40 m c/c including
excavating pits for foundation fixing post in
C.C. 1:4:8 of size 45 cm x 45 cm x 45 cm
fixing chain link with 3.25 mm ( 10 guage ) G.I.
wire and M.S. flat of size 40 mm x 5 mm
provided at top and bottom and with oil paint
etc. complete.
Providing and erecting 1.20 mtr high welded

square mesh fencing with welded square
mesh of 3 mm thick G.I. wire &having hole
size 40 mm x 40 mm supported on M.S. angle
post of size 50 mm x 50 mm x 6 mm as with
M.S. flat of size 40 mm x 5 mm nut bolted with
support angle including fixing post in C.C.
1:4:8 block and fastening with welded square
mesh painting the exposed structural steel
work etc. complete.
168
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Rmt.
670.00
71.00
Rmt.
621.00
90.00
SR.NO.
&
CODE
NO.
Providing and erecting including fabricating

0.90 Mt.high decorative type chain link
fencing with panelling made out of M.S. angle
50 mm x 50 mm x 6 mm for frame work with
M.S. flat 40 mm x 5 mm welded for fastening
chain link with frame angle and chain link
mesh of 10 gauge & having hole size 65 mm x
65 mm panelling supported on post made of
M.S. flat 50 mm x 6 mm on either side of
pannel including fixing posts in C.C. 1:4:8
block and fastening the chain link, painting the
exposed structural steel work with oil paint
(M.S.flat post to be 1.05 Mtr. in height above
ground level), including constructing BB
masonary 23 cm thick 0.50 m. in ht. (0.20 m
below G.L. and 0.30 m. above G.L.) including
cement plaster in C.M.1:5 and colour washing
etc. complete.
(a)------ do -------- Excluding B.B. masonary
169
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Rmt.
1581.00
187.00
Rmt.
1052.00
142.00
(d) DISMANTALING
SR.NO.
&
CODE
NO.
1
BDW
8 -3E
Removing single country tiled roof with

battens and stacking the materials as directed
with all leads and lifts etc. complete.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Sq.m.
35.00
35.00

2
BDW
8B
Removing double country tiled roof and

ridge tiles with ridge and battens and stacking
the materials as directed with all leads and
lifts, complete including removing wood work
below.
Sq.m.
45.00
45.00
3
BDW
8A
Removing Manglore tiled roof and ridge tiles

with battens, ridge and barge boards, eaves
boards etc. and stacking the materials as
directed with all leads and lifts complete.
Including removing wood work below.
Sq.m.
40.00
40.00
Removing and resetting Manglore tiles from

roof including refixing loose battens.
Sq.m.
22.00
22.00
Sq.m.
23.00
23.00

5
Removing G.I. and A.C sheet roof covering

and stacking them as and where directed in
the compound, including scaffolding etc.
complete.
170
SR.NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Removing G.I. and A.C sheet roofing

including purlins and rafters etc. including
sorting out serviceable and unserviceable
material and stacking the same as and where
directed
in
the
compound,
including
Sq.m.
29.00
29.00
Removing R.S.girders of any size and span

lowering the same and stacking neatly where
ever directed in compound,scaffolding etc.
complete for all height.
M.T.
920.00
920.00
8
BDW
8-3D
Dismantling the R.C.C. work 1:2:4 and sorting

out the materials such as steel etc. as directed
and stacking them within the specified lead as
directed.
Cu.m.
792.00
792.00
9
BDW
8D
Removing planking from roof or ceiling and

stacking them as directed with all leads and
lifts etc. complete.
Sq.m.
17.00
17.00
No.
168.00
168.00
10
BDW
8E
Removing queen post truss from roof and

stacking the materials as directed with all
leads and lifts etc. complete.
171
SR.NO.
&
CODE
NO.
11
BDW
8F
Removing king post truss from roof and

leads and lifts etc. complete.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
155.00
155.00
No.
132.00
132.00
12
BDW
8G
Removing other type truss below 5 M span

from roof and stacking the materials as
directed with all leads and lifts etc. complete.
13
BDW
8J
Dismantling flat wooden or A.C. sheet

ceiling with frame work including stacking the
materials as directed with all leads, lifts etc.
complete.
Sq.m.
35.00
35.00
14
BDW
8K
Removing cloth ceiling including frame work

and stacking the materials as directed with all
leads, lifts etc.complete.
Sq.m.
10.00
10.00
15
Removing the tiles battens and dungree

cloth, purlins, rafters, ridges etc. from roof,
sorting out serviceable and unserviceable
materials and stacking the same as and where
directed in the compound scaffolding etc.
complete.
Sq.m.
31.00
31.00
172
SR.NO.
&
CODE
NO.
16
BDW
8-3F
Removing battens from roof and stacking

them as directed with all leads and lifts etc.
complete.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Rmt.
4.00
4.00
Sq.m.
2.00
2.00
17
BDW
8 -3G
Removing matting from roof and stacking as

directed with all leads and lifts etc. complete.
18
BDW
8-3H
Removing purlins from roof including

stacking as directed with all leads, lifts etc.
complete.
Rmt.
4.00
4.00
19
BDW
8-3I
Removing rafters from roof including the

complete.
Rmt.
4.00
4.00
20
BDW
8-4
Removing cloth partition with frame work

leads, lifts etc. complete.
Sq.m.
2.00
2.00
21
BDW
8-1G
Removing doors and windows with frames

No.
78.00
78.00
173
SR.NO.
&
CODE
NO.
22
BDW
8-1H
Removing ventilators and small windows

with frame and stacking the materials with all
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
No.
78.00
78.00
23
BDW
9-1I
Removing wooden or A.C. partition

including frame work and stacking the
material as directed with all leads, lifts etc.
complete.
Sq.m.
12.00
12.00
24
BDW
8-2
Removing teak wood trellies work with

frame including stacking the materials as
directed with frame all leads, lifts etc.
complete.
Sq.m.
12.00
12.00
25
BDW
8-2C
Dismantling wooden floor including beams

and joists, stacking the materials as directed
with all leads, lifts etc. complete.
Sq.m.
9.00
9.00
Sq.m.
17.00
17.00
Sq.m.
5.00
5.00
26
BDW
8-2D
Removing cement or lime plaster including

disposing of the spoils as directed with all
27
BDW
8-2E
Removing mud plaster including disposing of

the spoils as directed with all leads, lifts etc.
complete.
174
SR.NO.
&
CODE
NO.
28
BDW
8-1
Dismantling brick masonry in mud mortar

UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Cu.m.
90.00
90.00
Cu.m.
161.00
161.00
Cu.m.
99.00
99.00

29
BDW
8-1A
Dismantling brick masonry in lime or

cement mortar and stacking the materials as
directed with all leads, lifts etc. complete.
30
BDW
8-1B
Dismantling stone masonry in mud including

31
BDW
8-1C
Dismantling stone masonry in lime or

cement mortar including stacking the
complete.
Cu.m.
184.00
184.00
32
BDW
8-2.1
Removing cement tiles, or marble or

polished shahabad floor or dado without
bed concrete including stacking the materials
as directed with all leads, lifts etc. complete.
Sq.m.
45.00
45.00
33
BDW
8-2B
Removing Shahabad or Tandur stones from

floor without bed concrete including stacking
the materials as directed with all leads, lifts
etc. complete.
Sq.m.
38.00
38.00
175
SR.NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
34
BDW
8-1E
Removing rich mix cement concrete

including stacking the spoils as directed with
all leads, lifts etc. complete.
Cu.m.
853.00
853.00
35
BDW
8-1F
Removing brick bat coba including stacking

the spoils as directed with all leads, lifts etc.
complete.
Cu.m.
117.00
117.00
36
BDW
8-1D
Removing lime or lean cement concrete

including stacking the spoils as directed with
all leads, lifts etc.complete.
Cu.m.
344.00
344.00
Sq.m.
35.00
35.00
37
BDW
8-2A
Removing trap stone from floor without bed

concrete including stacking the materials as
38
BDW
8-2F
Removing wire fencing with wooden post

and stacking the material with all leads, lifts
etc. complete.
Rmt.
5.00
5.00
39
BDW
8-2G
Removing wire fencing with iron/ C.C.

fencing posts and stacking the materials as
Rmt.
7.00
7.00
176
SR.NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
40
BDW
8-2H
Removing iron pipe railing having wooden

R.C.C. or C.C. or iron posts and stacking the
materials as directed.
Rmt.
7.00
7.00
41
BDO
8B
Removing old paint from steel and other

metal surface with flame, cleaning and
making the surface even and scaffolding etc.
complete.
Sq.m.
18.00
18.00
42
BDO
82
Removing old paint from steel and other

metal surface with hand scrapping,
cleaning and making the surface even and
Sq.m.
6.00
6.00
43
BDW
15
Removing Urinal Pans or W.H.B. with frame

including disconnecting the sanitary and water
supply connections, removing the same
carefully and stacking the serviceable
materials as and where directed including
throwing the unserviceable materials outside.
No.
54.00
54.00
44
BDW
16
Removing W.C. Pan including disconnecting

the sanitary and water supply connections,
removing and breaking flooring and bed
concrete around pan centre to centre including
removing the same carefully and stacking
serviceable materials as and where directed
including throwing the unserviceable material
out side etc complete
No.
118.00
118.00
177
SR.NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
45
BDW
16
Scraping out old white wash/colour wash

by, brushing and or scraping by sand paper
and preparing the wall surface smooth
including necessary repairs to scratches etc.
complete.
Sq.m.
2.00
2.00
46
BDW
16
Scraping out old white wash/colour

wash/distemper by brushing and or scraping
by sand paper and preparing the wall
surface by applying full putty of approved
make to complete surface, scraping with sand
paper and making smooth surface to receive
further painting coats etc. complete.
Sq.m.
10.00
10.00
Transportation of material obtained from

debris of various sorts including necessary
excavation/
loosing
including
loading,
unloading and conveying and disposing as
directed.
(a) For 1 Km.
(b) For 2 Km.
Cu.m.
Cu.m.
234.00
252.00
0.00
0.00
(c ) For 3 Km.
Cu.m.
270.00
0.00
(d) For 4 Km.
Cu.m.
288.00
0.00
(e) For 5 Km.
Cu.m.
306.00
0.00

47
BDW
16
178
BR
SR.NO.
&
CODE
NO.
1
BR
3A1
:-
BRIDGE WORK
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour

types, sand, gravel soft murum etc. including
shoring and strutting as necessary and disposing
off excavated stuff within lead of 100 m as
directed etc. complete.
a) Lift upto 1.5 metre
Cu.m.
168.00
168.00
b) Above 1.50 metre to 3.00 metre
Cu.m.
184.00
184.00
c) Above 3.00 meter to 6.00 metre
Cu.m.
198.00
198.00
d) Above 6.00 metre
Cu.m.
218.00
218.00
Cu.m.
228.00
228.00
Cu.m.
251.00
251.00
Cu.m.
359.00
359.00
Cu.m.
366.00
366.00
Spec.No.: BR.3/Page No.102

2
BR
3A2

types, sand, gravel soft murum etc. for cut off
wall including shoring and strutting as necessary
and disposing off excavated stuff within a lead of
100 m as directed etc. complete.

3
Excavation for foundation and raft in marshy

soil including shoring and strutting as necessary
and disposing off excavated stuff within a lead of
100 m as directed etc. complete.
179
SR.NO.
&
CODE
NO.
4
BR
3B
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Excavation for foundation in hard murum

including shoring and strutting as necessary and
disposing off excavated stuff within lead of 100 m
as directed etc. complete.
Cu.m.
212.00
212.00
Cu.m.
226.00
226.00
Cu.m.
239.00
239.00
d) Above 6.00 metre
Cu.m.
251.00
251.00
Cu.m.
224.00
224.00
Cu.m.
240.00
240.00
Cu.m.
250.00
250.00
d) Above 6.00 metre
Cu.m.
267.00
267.00
Cu.m.
399.00
399.00
Cu.m.
405.00
405.00
Cu.m.
410.00
410.00
d) Above 6.00 metre
Cu.m.
421.00
421.00
Spec.No: BR.3/Page No.102

5
BR
3C
6
BR
3D
Excavation for foundation in hard murum and

boulders including shoring and strutting as
necessary and disposing off excavated stuff within
lead of 100 m as directed etc. complete.

Excavation for foundation in soft rock and
including shoring and strutting as necessary and
disposing off excavated stuff within lead of 100 m
180
SR.NO.
&
CODE
NO.
7
BR
3E
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Excavation for foundation including shoring and

strutting as necessary and disposing off
excavated stuff within a lead of 100 m as directed
in hard rock (blasted).
Cu.m.
457.00
295.00
Cu.m.
468.00
312.00
Cu.m.
482.00
336.00
d) Above 6.00 metre
Cu.m.
494.00
361.00
Cu.m.
634.00
570.00
Cu.m.
652.00
579.00
Cu.m.
682.00
615.00
d) Above 6.00 metre
Cu.m.
699.00
623.00

8
BR
3F
Excavation for foundation including shoring and

strutting as necessary and disposing off
excavated stuff within a lead of 100 m as directed
in hard rock. (chiselled and wedged or line
drilled)
181
SR.NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
9
Labour
Dewatering including diversion of stream,

providing cofferdams, bunds, etc. as may be
necessary for foundation and other parts of the
work and bailing out water during and after
excavation as required.
A) For Open Foundation.
i) For abutment
Cu.m
72.00 to 125.00
ii) For pier
Cu.m
114.00 to 839.00
iii) For returns
Cu.m
up to 68.00
i) For raft with cut off in Sandy strata
Sq.m.
141.00 to 276.00
ii) Other strata like B.C. soil, soft moorum etc.
Sq.m.
112.00 to 196.00
iii) Perennial river / streams in sandy / Non sandy

strata in command area of Irrigation project
having summer Irrigation
Sq.m.
558.00 to 950.00
i) All types of strata
Sq.m.
62.00 to 145.00
ii) Perennial river / streams in sandy/Non sandy

strata in command area of Irrigation project
having summer Irrigation .
Sq.m.
164.00 to 204.00
Providing and laying in situ C.C.1:3:6 of trap /

granite / quartzite / gneiss metal in foundation
as levelling course including necessary bailing
out water, including plywood/steel form work,
steel centering, compaction by vibrating finishing
etc. complete. The C.M. 1:3 plaster is considered
for rendering uneven and honeycombed surface
only. Newly laid concrete shall be covered by
centering/ formwork will not be allowed).
Cu.m.
B) For raft foundation
C) Apron with curtain walls in
10
BR
5
Spec.No.: BR5/Page No.105/I.S.456 (2000)
182
3344.00
648.00
SR.NO.
&
CODE
NO.
11
BR
5F
12
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Providing and laying in situ C.C.of required

grade of trap / granite / quartzite / gneiss
metal in foundation including necessary bailing
out water, including plywood/steel form work,
steel centering and excluding dewatering by pump
compaction by vibrating finishing uneven and
honeycombed surface with C.M.1:3 of sufficient
minimum thickness to give a smooth and even
surface or roughening the surface if special finish
is to be provided, curing etc. complete.(Excluding
reinforcement, including cover block) The C.M.
plastic,
tarpaulin
etc.
(Wooden
centering/formwork will not be allowed)
a) For C.C. M-15 grade
Cu.m.
4022.00
493.00
b) For C.C. M-20 grade
Cu.m.
4278.00
542.00
c) For C.C. M-25 grade
Cu.m.
4479.00
558.00
Cu.m.
3924.00
493.00
Spec.No.: BR.5/Page No.105/I.S.456 (2000)

Providing and laying in situ C.C. M-15 / 1:2:4 of
trap / granite / quartzite / gneiss metal for
annular filling around pier / abutment including
necessary
bailing
out
water,
excluding
dewatering by pump compaction by vibrating
finishing uneven and honeycombed surface with
C.M.1:3 of sufficient minimum thickness to give a
surface if special finish is to be provided, curing
etc. complete. The C.M. 1:3 plaster is considered
gunny bag, plastic, tarpaulin etc.
183
SR.NO.
&
CODE
NO.
13
BR
5A
14
BR
5E
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Providing and laying in situ C.C. of required

grade of trap / granite / quartzite / gneiss metal
for cut off and curtain walls including
plywood/steel
formwork,
steel
centering,
is to be provided, curing etc. complete.(Excluding
and honeycombed surface only. (excluding cost
of reinforcement) Newly laid concrete shall be
covered by gunny bag, plastic, tarpaulin etc.
(Wooden centering/formwork will not be
allowed).
Cu.m.
5375.00
1577.00
Cu.m.
5618.00
1592.00
Cu.m.
5773.00
1618.00
d) For C.C. M-30 grade
Cu.m.
5932.00
1634.00
Cu.m.
3368.00
534.00
Spec.No: BR.5/Page No.105/I.S.456 (2000)

Providing and laying in situ 1:3:6 cement
concrete of trap / granite / quartzite / gneiss
metal for levelling coures below R.C.C raft and
in foundation including necessary plywood/steel
formwork, steel centering, compaction by vibrating
finishing, curing etc. complete. The C.M. 1:3
plaster is considered for rendering uneven and
honeycombed surface only. Newly laid concrete
tarpaulin etc. (Wooden centering /formwork
184
SR.NO.
&
CODE
NO.
15
BR
5C
16
BR
5G
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Providing and laying in situ cement concrete of

required grade of trap / granite / quartzite /
gneiss metal for R.C.C raft and providing
vertical headers including plywood/steel formwork,
uneven and honeycombed surface with C.M.1:3
of sufficient minimum thickness to give a smooth
special finish is to be provided, curing etc.
complete.(Excluding reinforcement, including
cover block) The C.M. 1:3 plaster is considered
centering/formwork will not be allowed).
Cu.m.
5009.00
1476.00
Cu.m.
5162.00
1495.00

Spec.No.: BR.5/Page No. 105/I.S. 456 (2000)
Providing and fixing UPVC pipes of 110 mm
diameter and of required length for relieving
water pressure, stone filter as directed
complete.(For relieving water pressure in raft).
Cu.m.
5322.00
1518.00
Rmt.
123.00
15.00
Cu.m.
3505.00
612.00

17
Providing and laying in position Precast Plain

cement concrete M-10 grade blocks of
rectangular shape, for aprons on U/s and D/s
sides as per drawing and as directed complete.
185
SR.NO.
&
CODE
NO.
18
BR
6A
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
445.00
173.00
M.T.
58206.00
8059.00
M.T.
58206.00
8059.00
Cu.m.
5535.00
1379.00
Cu.m.
5689.00
1396.00
Cu.m.
5849.00
1420.00
Providing and laying in position trap / granite /

quartzite / gneiss stone of appoved quality for
aprons on U/s and D/s sides as per drawing and
as directed complete.Weight of atleast 80% of
stones shall be more than 40kg.( Including
Royalty charges )
Cu.m.

19
BR
8
Providing, fabricating, launching, floating and

grounding in position steel curbs for wells with
necessary steel bracing and steel cuting edges as
shown in the detailed drawings.
20
BR
10
Providing fabricating and setting out mild steel

cutting edges for R.C.C well curbs as shown on
the detailed drawings.
21
BR
12
Providing and laying in situ C.C required grade

of trap / granite / quartzite / gneiss metal for
R.C.C
well
curbs
including
necessary
compacting by vibrating, finishing and finishing
and even surface curing complete. (Excluding
reinforcement and including steel shuttering &
Spec.No.: BR.10/Page No. 110
186
SR.NO.
&
CODE
NO.
22
BR
131
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Providing and laying in situ C.C. of requierd

in well steining including compacting by
vibrating, finishing and finishing uneven and
surface,
curing
complete.
(Excluding
reinforcement and including steel shuttering &
centering / formwork will not be allowed).
Cu.m.
4801.00
837.00
Cu.m.
5047.00
872.00
Cu.m.
5200.00
887.00
187
SR.NO.
&
CODE
NO.
23
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Sinking the wells for foundation in soft strata /

boulders etc. which can be removed by grabing
& chiselling soft disintegrated rock which requires
special efforts , including blasting , large scale
dewatering heavy chiselling, cutting by pneumatic
tools and all materials available to sink trough
such strata including removal of obstacles and
use of necessary plant & machinery, drivers
etc.and proper setting of wells including all sinking
(depth 0 to 5 meters).
A) 4 m. dia. Twin well
i) Depth up to 5 m.
Rmt
35007.00
17850.00
ii) Depth 5 m. to 10 m.
Rmt.
44176.00
22316.00
iii) Depth 10 m. to 15 m.
Rmt.
48161.00
26790.00
iv) Depth 15 m. to 20 m.
Rmt.
55809.00
27668.00
i) Depth up to 5 m.
Rmt.
34403.00
10986.00
Rmt.
45151.00
14217.00
Rmt.
49086.00
15317.00
Rmt.
56619.00
17604.00
i) Depth up to 5 m.
Rmt.
55073.00
31319.00
Rmt.
72271.00
40827.00
Rmt.
78565.00
43975.00
Rmt.
90634.00
50260.00
i) Depth up to 5 m.
Rmt.
99152.00
67472.00
Rmt. 130126.00
87721.00
Rmt. 141454.00
94474.00
Rmt. 163177.00
107957.00
B) 4 m. dia. Single well
C) 6 m. dia. Single well
D) 8 m. dia Single well
188
SR.NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
E) 10 m. dia Single well

i) Depth up to 5 m.
Rmt. 116629.00
79902.00
Rmt. 153064.00
103881.00
Rmt. 166390.00
111865.00
Rmt. 191938.00
127840.00
a) Depth up to 5 m.
Rmt
73469.00
49828.00
b) Depth from 5 m. to 10 m.
Rmt
96418.00
64776.00
c) Depth from 10 m. to 15 m.
Rmt.
98932.00
65842.00
d) Depth from 15 m. to 20 m.
Rmt. 120906.00
79730.00
1) 100% Extra for depth above 20m

2) for change in diameter of well add
difference on prorata on area basis.
Note: Add 200% for sinking in soft rock and
400% in hard rock.
24
BR
14
Sinking of well 7 m. dia. for foundation through

all strata except rock by approved method
including removal of obstacle and use of
necessary plant, machinery, divers etc. and
proper seating of the well.
e) For change in diameter of well add

1) 100% Extra for depth above 20m
2) for change in diameter of well add
Note : Add 200% for soft rock.
Add 400% for hard rock.
189
SR.NO.
&
CODE
NO.
25
BR
16
Providing steel anchor dowels at the base of

the well including drilling holes upto 2.5 m. depth
in rock, placing the dowels in position and
effectively grouting the holes. (32 mm dia. steel
rod of 4.0 m. length grouted upto 2.5 m depth.)
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
No.
5172.00
575.00
No.
5521.00
627.00
Cu.m.
3964.00
788.00
Cu.m.
244.00
55.00
Cu.m.
3819.00
705.00

26
BR
16A
Providing steel anchor dowels in rock for

steining, including drilling holes upto 2.5 m. depth
in rock, placing dowels in position and effectively
grouting holes ( 32 mm diameter steel rod of 4.0
m length grouted upto 2.5 m depth.)
27
BR 17
Providing and laying in situ C.C M-15 of trap /

granite / quartzite/ gneiss metal for the bottom
plugs of wells in the dry or under water including
compaction and curing wherever necessary.
28
BR
18
Providing and filling in well with sand/rubble

and
sand/shingle
and
sand
including
compaction between the top and bottom plugs. (
Including Royalty charges )
29
BR
19
Providing and laying in situ C.C. M-15 / 1:2:4 of

trap / granite / quartzite / gneiss metal for top
plug of well including compaction by vibration
and curing .
190
SR.NO.
&
CODE
NO.
30
BR
24
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Providing and laying in situ C.C.of required

for R.C.C. well / pile cap including plywood/ steel
formwork and steel, centering, compaction by
vibrating finishing uneven and honeycombed
surface with C.M.1:3 of sufficient minimum
thickness to give a smooth and even surface or
roughening the surface if special finish is to be
provided, curing etc. complete. (Excluding M.S.
reinforcement and including shuttering &
cover block) The C.M.1:3 plaster is considered
centering/ formwork will not be allowed).
Cu.m.
4525.00
887.00
Cu.m.
4678.00
903.00
Cu.m.
4839.00
927.00
a) Liner of 750 mm dia.
Rmt.
9091.00
3517.00
b) Liner of 900 mm dia.
Rmt.
10835.00
4488.00
c) Liner of 1000 mm dia.
Rmt.
11897.00
4562.00
d) Liner of 1200 mm dia.
Rmt.
13456.00
4756.00

31
Providing, placing and driving in position 6 mm

thick permanent M.S. liner upto required depth
with 12 mm thick M.S.cutting edge of 0.50 m
length at bottom including fabricating, cutting the
M.S.sheet to required diameter and shape,
welding the joints and driving with the help of
required machineries including all materials,
labour and lift etc. complete.
191
SR.NO.
&
CODE
NO.
32
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Boring and providing specified grade R.C.C.

cast in situ bored piles each of capacity as
designed and of required diameter as directed,
place through steel shell sunk to the required
depth through all types of strata, use of bentonite
slurry as directed including placing concrete by
trimmey arrangement compaction of concrete and
withdrawal shell etc. complete. (Excluding cost
of reinforcement).
( A )For M-20
(i) 750 mm diameter
Rmt.
4743.00
633.00
(ii) 900 mm diameter
Rmt.
5749.00
720.00
(iii) 1000 mm diameter
Rmt.
6796.00
814.00
(iv) 1200 mm diameter
Rmt.
8574.00
1137.00
(i) 750 mm diameter
Rmt.
4861.00
612.00
Rmt.
5871.00
727.00
Rmt.
6923.00
821.00
Rmt.
8708.00
1143.00
(i) 750 mm diameter
Rmt.
5004.00
619.00
Rmt.
6346.00
734.00
Rmt.
7075.00
834.00
Rmt.
8869.00
1157.00
(i) 750 mm diameter
Rmt.
5088.00
633.00
Rmt.
6105.00
739.00
Rmt.
7165.00
841.00
Rmt.
8964.00
1164.00
( B )For M-25
( C )For M-30
( D )For M-35

192
SR.NO.
&
CODE
NO.
33
BR
27B
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Providing and laying C.C. of required grade of

trap / granite / quartzite / gneiss metal for cast
in situ piers, abutments, returns, wings etc.
including provision of 'V' shaped false joints to
form suitable panels on the faces to approved
design including plywood/ steel formwork, steel
centering, compaction by vibrating finishing
special finish is to be provided, curing and bailing
out water. The C.M. 1:3 plaster is considered for
rendering uneven and honeycombed surface only.
(Excluding reinforcement, including cover
block) Newly laid concrete shall be covered by
centering / formwork will not be allowed).
Cu.m.
4329.00
896.00
b) For C.C. M-20grade
Cu.m.
4573.00
912.00
Cu.m.
4749.00
937.00
Cu.m.
4888.00
959.00
Rmt.
122.00
15.00
a) Mild steel bars
M.T.
57934.00
3978.00
b) TMT/ H.Y.S.D steel bars
M.T.
59438.00
3978.00

34
BR
57D
Providing and fixing UPVC pipe of 110 mm. dia

and of required length for releving water
pressure in abutment, riding returns, including
necessary inverted filter etc. complete.
35
BR
35
Providing and cutting, bending, hooking, laying, in

position and tying bar reinforcement as per
detailed drawing for R.C.C. works etc. complete.

193
SR.NO.
&
CODE
NO.
36
BR
36A
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Providing welded joints for mild / H.Y.S.D/T.M.T

steel reinforcement bars of
a) 25 mm diameter and under.
No.
174.00
37.00
b) 28 mm diameter.
No.
196.00
37.00
c) 32 mm diameter.
No.
245.00
44.00
d) 36 mm diameter.
No.
273.00
52.00
e) 40 mm diameter.
No.
311.00
60.00
Cu.m.
4807.00
738.00
Cu.m.
4961.00
754.00
Cu.m.
5120.00
770.00

37
BR
29A
Providing and laying in situ C.C of required

grade of trap / granite / quartzite/ gneiss metal
for R.C.C caps over piers and abutments
including necessray scaffolding, plywood/ steel
etc. complete. (Excluding reinforcement and
including centering & cover block.) The C.M.
plastic, tarpaulin etc. (Wooden centering/
formwork will not be allowed).
194
SR.NO.
&
CODE
NO.
38
BR
30
39
BR
39A
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour

gneiss metal for the R.C.C concrete block
below the bearing
including scaffolding,
is to be provided, curing etc. complete.
(Excluding reinforcement and including steel
formwork, plywood centering & cover block .)
The C.M. 1:3 plaster is considered for rendering
uneven and honeycombed surface only. Newly
laid concrete shall be covered by gunny bag,
plastic,
tarpaulin
etc.
(Wooden
Cu.m.
4900.00
738.00
Cu.m.
4950.00
754.00
Cu.m.
5152.00
770.00

Providing tar paper bearing of approved quality
in proper size etc. complete.
Sq.m.
15.00
1.00
Rmt.
1264.00
98.00
Cu.
Cm.
1.00
---

40
BR
43A
Providing M.S.PLATE expansion joints as per

detailed drawings.
41
Providing elastomeric bearing in required

position testing, cuting, fixing in position as per
detailed drawing including scaffolding etc.
complete.
195
SR.NO.
&
CODE
NO.
42
BR
48
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
No.
850.00
104.00
Cu.m.
5746.00
1484.00
Cu.m.
5901.00
1500.00
c) For C.C. M-30grade
Cu.m.
6060.00
1523.00
Cu.m.
6155.00
1539.00
Providing vent holes in slab and wearing

course of 100 mm dia. of galvanised iron pipe
having tail end 300 mm. Below soffit of slab, with
mild steel sheet box (18 gauge) in conical funnel
shape with 200 mm x 200 mm size iron grating on
top as per drawing etc. complete.
43
BR
38A1
Providing and laying in situ Cement concrete of

gneiss metal for R.C.C Work in solid / deck
slab including plywood/steel formwork, steel
centering, compaction by vibrating finishing
special finish is to be provided, curing and
finishing
in
cement
plaster
(Excluding
plastic, tarpaulin etc. (Wooden centering /
Height upto 3.00 m
Note :
Add for height above 3m to 6m. - 5% (Above
average bed level)
Add for height above 6m. - 10% (Above
average bed level)
196
SR.NO.
&
CODE
NO.
44
BR
38B
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour

gneiss metal for R.C.C Work in arches
including skew back, plywood/steel formwork,
special finish is to be provided, curing etc.
complete. (Excluding reinforcement, including
centering will not be allowed).
Height upto 3.00 m

Cu.m.
7165.00
2312.00
Cu.m.
7339.00
2312.00
Note :
Add upto height above 3m to 6m. - 5% (Above
average bed level)
Add for height above 6m. - 10% (Above
average bed level)
197
SR.NO.
&
CODE
NO.
45
BR
38A
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour

gneiss metal for R.C.C. Work in main / cross,
girder, diaphragm etc. including plywood/ steel
etc. complete. (Excluding reinforcement,
including cover block) The C.M. 1:3 plaster is
considered
for
rendering
uneven
and
tarpaulin etc. (Wooden centering/formwork
Height upto 3.00 m

Cu.m
6164.00
1520.00
Cu.m
6341.00
1538.00
Cu.m
6478.00
1561.00
Cu.m
6573.00
1577.00
Providing galvanised iron 100 mm diameter 110

mm outer diameter pipe for water spouts as per
drawing.
No.
616.00
120.00
a ) UPVC (SWR) grade 110 mm pipe
No.
180.00
31.00
Note :
i) Add upto height above 3m to 6m. - 5%
(Above average bed level)
ii) Add for height above 6m. - 10% (Above
average bed level)
46
BR
55
198
SR.NO.
&
CODE
NO.
47
BR
43B
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Sq.m.
790.00
90.00
Cu.m.
3092.00
492.00
Cu.m.
354.00
82.00
a) For 15 mm Thickness
Sqm.
441.00
77.00
b) For 25 mm Thickness
Sqm.
735.00
128.00
c) For 40 mm Thickness
Sqm.
1174.00
204.00
Providing expansion joints with 25 mm thick

bitumenous pad as per detailed drawings.
Spec. No.: BR. 43/Page No. 138
48
BR
45

metal for haunch filling including compacting,
curing complete.
49
BR
46
Providing trap/granite/quartzite/ gneiss rubble

filling over haunches and arches including
hand packing.
Spec.No.: BR.46/Page No.140.
50
Providing and laying Mastic asphalt wearing

course with paving grade bitumen 14 % by
weight of total mix, filler, fine & course aggregate,
meeting the requirements given in table 500-29,
of MORT&H Specifications prepared by using
mastic cooker and laid to required level and slope
after cleaning the surface, including providing
antiskid surface with bitumen precoated
finegrained hard stone chipping of 13.2 mm
nominal size at the rate of 0.005 cum per 10 sqm
and at an approximate spacing of 10 cm center to
center in both directions, pressed into surface
when the temperature of surfaces is not less than
0
100 C, protruding 1 mm to 4 mm over mastic
surface, etc. complete (excluding tack coat, mix
design is required for each case).
Spec. No. :M.O.R.T.& H 2001 Clause No 515 P.

No. 207
199
SR.NO.
&
CODE
NO.
51
BR
47C
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
A) Providing and laying in situ Cement concrete

of required grade of trap / granite / quartzite
/gneiss metal for wearing course 8 cm. thick
including plywood/steel formwork and compaction
by vibrator, finishing uneven and honeycombed
surface with C.M.1:3 of sufficient minimum
thickness to give smooth and even surface, filling
joints with bitumen, curing etc. complete. Newly
plastic, tarpaulin etc. (Wooden formwork will
not be allowed).
(Excluding reinforcement)
i) For C.C. M-20 grade
Cu.m.
4989.00
1221.00
ii) For C.C. M-25 grade
Cu.m.
5143.00
1237.00
i) For C.C. M-20 grade
Cu.m.
9502.00
1363.00
ii) For C.C. M-25 grade
Cu.m.
9655.00
1379.00
B) Including steel fibres confirming to I.S. 2801978 and IRC- SP-46-1997 (fibre diameter 0.50
mm to 1.00 mm and length 25mm. to 50mm.)
at the rate of 40 Kg/cum Note :-a) Item to be
used for bridges only b) for item no 51 (B),
separate item of steel reinforcement shall not
be considered.
200
SR.NO.
&
CODE
NO.
52
BR
50A
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour

required grade or trap / granite / quartzite /
gneiss metal for RCC work of ballast walls,
dirt walls, kerbs, box returns box cell etc.
including scaffolding, compaction, finishing,
plywood/steel formwork, steel centering. The C.M.
and honeycombed surface only. (Excluding
reinforcement, including cover block) Newly
plastic, tarpaulin etc. (Wooden centering /

i) For kerb and ballast wall.
Cu.m.
5563.00
1381.00
ii) For box return
Cu.m.
6433.00
1484.00
i) For kerb and ballast wall.
Cu.m.
5718.00
1405.00
ii) For box return
Cu.m.
6588.00
1500.00
iii) For Box cell
Cu.m.
6926.00
1762.00
201
SR.NO.
&
CODE
NO.
53
BR
51A
Providing R.C.C. parapet with M-20 Cement

metal with cast in situ / precast panels as per
the detailed drawing height of 1.1 mt.above top of
road surface, with post of 225 mm x 190 mm at 2
meter or less at equal distance suitable to span
having 10 mm reinforcement of minimum 4 bars
and 6 mm stirrups and R.C.C panels of approved
design at clear distance of 125 mm and thickness
of 150 mm with 10mm dia. 3 no.of bars
reinforcement at top and bottom and 6 mm dia. 4
no.bars as vertical or horizontal rails of size 100
mm x 150 mm and with clear speacing of 240 mm
including
scaffolding,
steel
centering,
plywood/steel formwork, compacting finishing,
and even surface and curing etc. complete.
(Including cost of reinforcement & cover
block.) The C.M. 1:3 plaster is considered for
rendering uneven and honeycombed surface.
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Rmt.
1601.00
575.00
Rmt.
1711.00
217.00
Newly laid concrete shall be covered by gunny

bag, plastic, tarpaulin etc. (Wooden centering/
Spec.No.: BR.51(A)/Page No.144/I.S. 456(1978)
54
BR
51B
Providing railing of mild steel angle of 75mm x

75 mm x 10 mm I section of 75 mm x 35
mm/Channel section 75 mm x 40 mm x 4.4 mm/
rectangular hollow section of 66 mm x 33 mm with
3 no. of 37.5 mm G.I. bars at a distance of 370
mm C/C bottom bar is provided at 150 mm above
kerb and height of railing upto top bar is at 1.10
mt from road top surface including drilling holes,
fixing post to kerb by 25 mm dia. bolts embeded
200 mm in kerb, including scaffolding, three coats
of painting etc. as per drawing complete.
Spec.No.: BR.51(B)/Page No.145
202
SR.NO.
&
CODE
NO.
55
BR
51D
56
BR
51E
Providing removable railing of height 1.10 m

with mild steel channel size 75 mm x 40 mm of
Ht.1.225 mt. above top of road surface posts and
removable galvanised iron pipe of dia 37.5 mm 3
nos. at distance 370 mm C/C and bottom bar 150
mm above kerb as per the detailed drawings
including scaffolding and painting etc. complete.
Spec.No.: BR.51(D)/P.No.146
Providing railing of cast in situ R.C.C posts with
1:2:4 (M-15) cement concrete trap / granite /
quartzite / gneiss metal size 150 mm x 150 mm
x 1.240 mm and removable galvanised iron pipes
of dia. 37.5 mm 3 nos. at distance 370 mm C/C
and bottom bar 150 mm above kerb as per the
detailed
drawings
(including
cost
of
reinforcement)
scaffolding,steel
centering,
plywood/steel formwork etc. complete. The C.M.
plastic,
tarpaulin
etc.
(Wooden
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Rmt.
1804.00
359.00
Rmt.
1234.00
165.00
Rmt.
1675.00
148.00
Rmt.
1607.00
190.00
Spec.No.: BR.51(E)/Page No.147/I.S. 456(2000)

57
Providing and fixing in position Guard Railing as
MORTH per Drg. No. 15 Typed C dt. 20-4-79, with 3 rows
2703 of 50mm dia. G.I. pipe 30cm a part and fixed in
M.S. channels of section 125 x 65 x 6 mm spaced

2.5 C/c 1:2:4 c.c. bedding of size 45 x 30 cm as
per detailed drawing with 3 coats of approved
yellow and black paint including necessary
excavation in any strata.
Spec. No. :MORTH 2703
58
Providing and fixing in position Guard Railing as
MORTH per Drg. No. 15 Typed C dt. 20-4-79, with 3 rows
2703 of 40mm dia. G.I. pipe 30cm a part and fixed in
M.S. channels of section 100 x 50 x 6 mm spaced

2.5 C/c 1:2:4 c.c. bedding of size 45 x 30 x 30 cm
as per detailed drawing with 3 coats of approved
yellow and black paint including necessary
excavation in any strata.
203
SR.NO.
&
CODE
NO.
59
Providing and fixing Guard Railing of 1000mm
MORTH height as per Type D Drg. No. 15 dt. 20-4-79, and
2703 fixed in 40 x 40 x 6 mm iron, angle embedded in
1:2:4 cement concrete bedding patti as per

detailed drawing, with 3 coats of approved of
yellow and black paint.
60
Providing and fixing Guard Railing of 1000mm
MORTH height in 25mm M.S. square bars 100 mm C/c. as
2703 per Type drawing No. 6 dt. 20-8-85 and fixed in
50mm x 50mm x 6mm iron angle embeded in
1:2:4 C.C. bedding 55 x 45 cm and 50 x 6 iron
patti as per detailed drawing with 3 coats of
approved yellow and black paiint.
61

Providing and laying of a strip seal expansion
joint catering to maxium horizontal movement up
to 70 mm, complete as per approved drawing and
standard specifications to be installedby the
manufacturer / supplier or their authorised
representative ensuring compliance to the
manufacturer's instructions for installation.
Spec.No.:As directed by Enginer incharge.
204
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Rmt.
1563.00
158.00
Rmt.
1543.00
233.00
Rmt.
13276.00
120.00
SR.NO.
&
CODE
NO.
62
BR
56
Providing and fixing marble tablet of size and

description as per detailed drawings including
moulded marble / 1:2 C.M. border.
UNIT
RATE FOR 2014-15

(In Rs. )
Completed
Labour
Sq.m.
3372.00
992.00
Cu.m.
429.00
98.00
Cu.m.
336.00
49.00
Sq.m.
577.00
127.00
No.
1731.00
275.00

63
BR
57
Providing trap / granite / quartzite / gneiss rubble

filling behind the abutment, returns or wings
including hand packing etc. complete.
64
BR
57A
Providing and filling sand below raft and in box

return including watering and compaction
etc.complete.
65
BR
57B
Providing 90 cm thick flexible stone mat as per

standard drawing including supplying all materials
at work site spreading and compaction etc.
complete.
66
BR
55
Providing and fixing in position G.I. water spouts

having 100 mm inner dia & 110 mm outer dia
pipe with C.I. greting and funnel as per
standard drawing etc. complete.
As per M.O.R.T.& H.
205
SR.NO.
&
CODE
NO.
67
UNIT
tonne
Supplying, fitting and fixing in position true to line
capacity
and level sliding plate bearing with PTFE
surface sliding on stainless steel complete
including all accessories as per drawing and
Technical Specifications and BS: 5400, section
9.1 & 9.2
(for PTFE) and clause 2004 of
MORT&H Specifications etc. complete.
RATE FOR 2014-15

(In Rs. )
Completed
Labour
233.00
57.00
Spec. No. :M.O.R.T.& H. 2001 Clause No 2000

P. No. 535,& Clause No 2200 P. No. 571
68
Providing and fabricating structural steel plate

girder including fabrication of built up section as
per detail design and drawing including cutting,
fabricating,erecting, hoisting,fixing in position,
making riveted / bolted / welded connection and
including two coat of red oxide and two coat of oil
paint of approved quality etc. complete.
M.T. 105556.00
16641.00

69
Providing and casing special grade in controlled

cement concrete of M-35 grade for
Prestressed concrete work for main girder
including slab , cross girder , box girder and
balanced cantilever etc. including centering and
scaffolding or launching including necessary plant
and machinery for the job shuttering , vibrating
curing , finishing in C.M. 1:3 etc. complete Steel
and plywood formwork.
(MOST 12.1 / 1500 , 1600 , 1700)
a) Height upto 5.00 m
Cum
7407.00
0.00
b) Height upto 5.00 m to 10 m
Cum
7941.00
0.00
c) Height above 10.00 m
Cum
8469.00
0.00
NOTE: 1) Add 50% on basic rate for span 30.00

to 50.00 m
2) Add 75% on basic rate for span 50 m
and above.
206
C.D. :- CROSS DRAINAGE WORK

SR.NO.
&
CODE
NO.
1
CD
1
Providing rubble filling of trap / granite /

quartzite / gneiss stones in foundation including
hand packing filling gravel / sand in the voids and
watering etc. complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Cu.m.
431.00
111.00
Cu.m.
2984.00
641.00
Cu.m.
4336.00
671.00
Spec.No.: CD.1/Page No.159

2
CD
3B

1:4:8 proportion with trap / granite / quartzite /
gneiss metal in foundation including necessary
compacting and curing complete. (Including
plywood/ steel formwork) The C.M. 1:3 plaster is
considered
for
rendering
uneven
and
tarpaulin etc. (Wooden centering/formwork will
not be allowed).
3
CD
3A
Providing and laying in situ cement concrete of M15 / 1:2:4 with trap / granite / quartzite / gneiss
metal in face wall/Sidewall of builtup drains
including plywood/ steel formwork and steel
centering, compaction by vibrator, finishing uneven
and honeycombed surface with C.M.1:3 of
sufficient minimum thickness to give smooth and
even surface, filling joints with bitumen, curing etc.
complete. (Excluding cost of reinforcement.)
The C.M. 1:3 plaster is considered for rendering
uneven and honeycombed surface only. Newly
plastic,
tarpaulin
etc.
(Wooden
Spec.No.: CD.3/Page No.160 /I.S.456 (2000)
207
SR.NO.
&
CODE
NO.
4
CD
4
Providing trap / granite / quartzite / gneiss

rubble stone paving of 23 cm thickness on a
bed of 15 cm. thick cement concrete of 1:4:8
proportion and fixing stones in proper line and
level and camber, filling joints by C.M.1:4
proportion, pointing, with C.M.1:3, curing etc.
complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sq.m.
943.00
224.00
Sq.m.
927.00
251.00
Rmt.
970.00
177.00
Rmt.
1482.00
233.00
Rmt.
2354.00
260.00
Rmt.
3008.00
339.00
Rmt.
3548.00
386.00
Rmt.
4921.00
438.00
Rmt.
4851.00
429.00
Rmt.
5673.00
511.00
Rmt.
7794.00
547.00
Rmt.
6922.00
519.00
Rmt.
8829.00
549.00

5
CD
5
Providing trap / granite / quartzite / gneiss

khandki paving of 23cm. thickness in 1:4 C.M.
over bedding of 15cm thick cement concrete of
1:4:8 proportion with trap / granite / quartzite /
gneiss metal including pointing with C.M. 1:3 and
watering complete.
6
CD
7AA
Providing and laying cement concrete pipe of

I.S.458/2003 N.P. class of required diameter in
proper line, level and slope including providing,
fixing collars or spigot and socket joint by rubber
ring and in C.M.1:2 etc. complete.
Diameter of pipe
A) NP-2 Class
i) 450 mm.
ii) 600 mm.
iii) 800 mm.
iv) 900 mm.
v) 1000 mm.
vi) 1200 mm.
B) NP- 3 Class
i) 900 mm.
ii) 1000 mm.
iii) 1200 mm.
C) NP- 4 Class
i) 1000 mm.
ii) 1200 mm.
Spec. No. MORT & H 2001 Clause -2901 Page
No.663
208
SR.NO.
&
CODE
NO.
7
CD
8
Providing cast in situ block of M-15 /

1:2:4cement concrete with circular or other
shaped opening for waterway including
necessary formwork, compaction, finishing and
curing etc. complete.(for craddle)
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Cu.m.
4377.00
688.00
Cu.m.
7336.00
876.00
Cu.m.
3116.00
527.00
Cu.m.
245.00
57.00
Cu.m.
4401.00
864.00
No.
286.00
77.00
Spec.No.: CD.8/Page No.163/I.S.456 (2000)

8
CD
12
Providing PRECAST M-20 R.C.C. slabs over the

spans of Cross Drainage work as per drawings
including reinforcement, conveyance, fixing in
C.M. 1:3 and curing, finishing complete.
9
CD
13

concrete of trap / granite quartzite / gneiss
metal for haunch filling including forms,
compacting, curing and scaffolding etc. complete.
10
CD
14
Providing selected murum (having PI < 6 )

filling including laying in layers of 15 cm to 20 cm
watering and compacting etc. complete. (
Including Royalty charges )
11
CD
15A
Providing and laying in situ M-20 cement

metal for wearing course 8 cm. thick including
compacting, finishing, in C.M. 1:3 proportion
curing and filling joints with bitumen complete.
(Excluding reinforcement)
Spec.No.:D.15/Page No.168/I.S.456 (2000)
12
CD
27
Providing stream lined R.C.C. guard stone

including M-20 Cement concrete and steel
reinforcement.
209
5 RD - ROAD WORKS
5(A) EXCAVATION AND EMBANKMENT
SR.NO.&
CODE
No.
1
RD
1A
UNIT
RATE FOR 2014-15

In Rs. )
Completed
Labour
Cutting down trees including trunks and branches

and removing wood upto 1 meter below ground level
and stacking the materials neatly with a lead of 50 m
as directed with specified girths etc. Complete as
directed by Engineer-in-charge.
a) girths above 30 cm. to 60 cm.
No.
110.00
110.00
b) girths above 60 cm. to 90 cm.
No.
217.00
217.00
c) girths above 90 cm. to 180 cm.
No.
525.00
525.00
d) girths above 180 cm. to 270 cm.
No.
828.00
828.00
e) girths above 270 cm. to 450 cm.
No.
1309.00
1309.00
f) girths above 450 cm.
No.
1913.00
1913.00
Spec.No. : Rd.1 Page No. 179

2
Excavation for road way in by mechanical means

including dressing section to the required grade,
camber and side slopes and conveying the excavated
materials with all lifts and spreading for embankment or
stacking etc. as directed by Engineer-in-charge.
(a) For earth soil of all sorts, sand, gravel, & soft
murum
Cu.M.
64.00
5.00
(b) For hard murum, hard murum with boulder
Cu.M.
84.00
6.00
Spec. No. : Rd. 2 Page No. 180.

Note : The item shall be applicable for roller
width, excavation and laying of embankment,
gutter.
210
SR.NO.&
CODE
No.
UNIT
RATE FOR 2014-15

In Rs. )
Completed
Labour
Cu.M.
371.00
89.00
A) For Static Roller Having Weight 8 to

10 MT.
Cu.M.
147.00
4.00
B) For Vibratory Roller Having Static Weight 8 to 10

MT.
Cu.M.
158.00
4.00
Providing, Laying, Spreading and compacting sand

& best available murum in 30:70 proportion
including mixing & spreading in uniform layers on a
prepared Surface & compacting with Static roller
having weight 8 to 10 MT including necassary
artificial watering, all materials, labour, machinery,
guarding, barricating complete with all leads & lifts of
all materials etc. complete. (Proportion of sand &
murum may be changed as per properties of sand &
murum. Accordingly rate will change.)
Spec. No. : Rd 24,25,28,38A

P. No. 203,205,210
4
Providing earth work for embankment with

approved materials obtained from excavation by
mechanical means from Departmental land or the
approved sources including all lifts and leads, laying
in layers of 20 cm to 30 cm. thickness breaking clods
dressing to the required lines, curves, grades and
sections, watering and compacting etc. complete as
directed by Engineer in charge.
( Including Royalty Charges )

Note : The item shall be applicable for new
embankment of Road, Bridge approach and
raised causeways.
211
SR.NO.&
CODE
No.
UNIT
RATE FOR 2014-15

In Rs. )
Completed
Labour
Providing earth work in embankment with approved

materials obtained from excavation by mechanical
means and other machineries including all lifts and
leads upto 50 m. laying in layers of 20 cm. to 30 cm.
thickness breaking clods, dressing to the required
lines, curves, grade and section, watering and
compaction to 95% of standard proctor density
etc. Complete as directed by Engineer in charge.
( Including Royalty Charges )
A) For Static Roller Having Weight 8 to

10 MT.
Cu.M.
158.00
5.00

MT.
Cu.M.
169.00
5.00
Cu.M.
76.00
5.00

Note : The item shall be applicable for new
embankment of Road, Bridge approach and
raised causeways.
6
Providing earth work in embankment with

approved Fly ash obtained from Thermal power
plant including loading unloading laying in layer of
which loose thickness shall not exceed 200 mm.
breaking clods of cover soil dressing to required
lines, curves, grades & section, watering and
compaction with power roller including providing
earth work over it for minimum thickness of 0.50 m on
top and 1.0 m on side slopes including without any
flooding & compaction complete. The soil cover of
required width be provided with the core and
mechanically compacted simultaneously so as to
have through compaction of each layer of Fly ash to
the specified density as stipulated in IRC SP 58 2001
(Transportation charges for fly ash shall be
considered separately for 0.60 Cum. quantity of
fly ash only for per cum. of embankment)
212
SR.NO.&
CODE
No.
UNIT
RATE FOR 2014-15

In Rs. )
Completed
Labour
7
RD
2
Excavation for roadway in earth soil of all sorts

sand, gravel or soft murum including dressing
sectioning to the required grade, camber and side
slopes and conveying the excavated materials with all
lifts and upto a lead of 50 m and spreading for
embankment or stacking as directed Engineer-incharge.
Spec.No.: Rd.2/Page No.180
Cu.m.
99.00
99.00
8
RD
3
Excavation for roadway in hard murum including

dressing section to the required grade, camber and
side slopes and conveying the excavated materials
with all lifts and upto a lead of 50 m and spreading for
Cu.m.
109.00
109.00
Cu.m.
118.00
118.00
Cu.m.
245.00
245.00
Cu.m.
431.00
304.00

9
RD
4
Excavation for roadway in hard murum and

boulders including dressing section to the required
grade, camber and side slopes and conveying the
excavated materials with all lifts and upto a lead of 50
m and spreading for embankment or stacking as
directed Engineer-in-charge.
10
RD
5
Excavation for roadway in soft rock, including

with all lifts and upto a lead of 50 m and spreading or
stacking as directed Engineer-in-charge.
11
RD
6
Excavation for roadway in hard rock by blasting

including dressing section to the required grade,
camber and side slopes and conveying the excavated
materials with all lifts and upto a lead of 50 m and
spreading or stacking as directed Engineer-in-charge.
213
SR.NO.&
CODE
No.
12
RD
7
Excavation for roadway in hard rock by

wedging/chiselling or line drilling including
with all lifts and upto a lead of 50 m and spreading or
stacking as directed Engineer-in-charge.
UNIT
RATE FOR 2014-15

In Rs. )
Completed
Labour
Cu.m.
528.00
403.00

13
RD
9A
Excavation for catch / side water gutter in all sort

of soils, soft murum etc. to the specified section
including stacking the excavated stuff in regular bund
and disposing off unsuitable or excess stuff upto a
lead of 50 m and spreading as directed Engineer-incharge.
Cu.m.
118.00
118.00
14
RD
9B
Excavation for catch / side water gutter in hard

murum to the specified section including stacking the
excavated stuff in a regular bund and disposing off
unsuitable or excess stuff as directed Engineer-incharge.
Cu.m.
128.00
128.00
15
RD
9E

murum and boulders to the specified section
including stacking the excavated stuff in a regular
bund and disposing of unsuitable or excess stuff as
directed Engineer-in-charge.
Cu.m.
139.00
139.00
16
RD
9C
Excavation for catch / side water gutter in soft

rock to the specified section including stacking the
excavated stuff in a regular bund and disposing off
unsuitable or excess stuff as directed Engineer-incharge.
Cu.m.
262.00
262.00
Cu.m.
511.00
59.00

17
RD
9D

rock by wedging & chisselling to the specified
section including stacking the excavated stuff in a
regular bund and disposing off unsuitable or excess
stuff as directed Engineer-in-charge.
214
SR.NO.&
CODE
No.
UNIT
RATE FOR 2014-15

In Rs. )
Completed
Labour
18
RD
9F
Excavation for widening of metal strips from 3.0

m. to 5.5 m. width in all soils including dressing
section to the required grade, camber and side
slopes and conveying the excavated materials with all
lift upto a lead of 50m. and spreading for
Cu.m.
101.00
101.00
19
RD
11
Conveying materials obtained from road cutting

including all lifts, laying in layers of 20cm to 30cm
(about 8" to 12") breaking clods, dressing to the
required lines, curves, grade 3% Camber design
superelevation
and
section,
watering
and
for a lead of 50 to 300 m inclusive from site of
excavation to the site of deposition as directed
Engineer-in-charge.
Cu.m.
74.00
4.00
Cu.m.
72.00
4.00
Cu.m.
Cu.m.
Cu.m.
26.00
40.00
56.00
26.00
40.00
56.00
Cu.m.
18.00
18.00

20
RD
11A

including all lifts, laying in layers of 20cm to 30cm
breaking
clods,
dressing
to
the
required
lines,curves,grade and section , watering and
compaction to 95% of standard Proctor density
for a lead of 50 m. to 300 m. with static roller etc.
complete.
21
RD
18A

including all lifts, laying in layers, breaking clods,
dressing to 3% camber /design superelevation ,
curves, grades and presceibed section for a lead of
over 50 m.upto 300 m. as directed Engineer-incharge.
a) 50 mt to 100 mt
b) 100 mt to 200 mt
c) 200 mt to 300 mt.
22
RD
17
Laying materials obtained from road cutting in

layers, breaking clods, dressing to 3% Camber
design superelevation curve & prescribed section for
embankment within a lead of 50 m.
215
SR.NO.&
CODE
No.
UNIT
RATE FOR 2014-15

In Rs. )
Completed
Labour
23
RD
10
Watering and compacting the embankment

formed of materials obtained from the road cutting,
within a lead of 50 m, to 95% of standard proctor
density after laying them in layers of 20cm to 30cm.
with 3% Camber and design superelevation
complete.
Cu.m.
43.00
4.00
24
RD
10A
Watering and compacting the embankment

formed of materials obtained from the road cutting,
within a lead of 50 m, to 100% of standard Proctor
density after laying them in layers of 20 cm to 30 cm
with 3% Camber and design superelevation etc.
complete.
Cu.m.
47.00
4.00
Spec.No.: Rd.10/Page No. 187
25
RD
12
Providing earthwork in embankment with approved

materials obtained from excavation by mechanical
means from departmental land or the apporved
sources upto lead of 50m, including all lifts, laying in
layers of 20cm to 30 cm thickness breaking clods,
dressing to 3% Camber, design superelevation,
curves, grade and prescribed section, watering and
etc. complete.
Note :Royalty shall be added seperately
Spec.No.: Rd.12/Page No. 189
Cu.m.
165.00
85.00
26
RD
12A

materials obtained from departmental land or the
approved sources upto lead of 50 m. including all
lifts, laying in layers of 20cm to 30cm thickness
breaking clods, dressing to 3% Camber design
superelevation curves, grade and prescribed section,
watering and compaction to 100% of standard
proctor density etc. complete.
Cu.m.
171.00
88.00

216
SR.NO.&
CODE
No.
27
RD
13

approved sources including all lifts, laying in layers
of 20 cm. to 30 cm. thickness breaking clods,
dressing to the required lines, curves, grade and
section, watering and compacting with Static roller
having weight 8 to 10 MT.complete.
UNIT
RATE FOR 2014-15

In Rs. )
Completed
Labour
Cu.m.
148.00
78.00
Cu.m.
137.00
76.00

Spec.No.:Rd.13/Page No. 194
28
RD
16

approved sources including in all lifts and leads
laying in layers of 15cm to 20cm thickness
breaking clods, and dressing to the required lines,
curves, grade and section etc. complete.

Spec.No.:Rd.16/Page No. 195
217
5(B) WBM Road Construction

SR.NO.
& CODE
No.
29
RD
19
Supplying 15 cm to 23 cm. trap / granite/

quartzite / gneiss stone rubble at the road side
for soling including conveying and stacking
complete. (By blasting)
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Cu.m.
228.00
122.00
Cu.m.
223.00
172.00
Cu.m.
326.00
354.00
178.00
196.00
Cu.m.
327.00
354.00
276.00
305.00
Cu.m.
280.00
51.00
Cu.m.
250.00
43.00
Spec.No.:Rd.19/Page no.197
30
RD
19A
Supplying 15 cm. to 23 cm. trap / quartzite /

gneiss stone rubble at the road side for soling
including conveying and stacking complete. (By
breaking boulders.)
31
RD
19B
Supplying trap /granite /quartzite / gneiss stone

metal of required size by bringing the boulders
at the road side breaking them to required
gradation including conveying the boulders and
stacking the broken metal etc. complete. (Prior
approval of sample stack of broken metal by
the Ex.Engineer is necessary, the date of
approval will form part of the measurements)
32
RD
23
a) By Breaking rubble obtained by blasting

i) 80 mm metal
ii) 40 mm metal
b) By Breaking boulder (Hand broken)
i) 80 mm metal
ii) 40 mm metal
Spec.No.:Rd.19,20,21,22/Page No. 197 to 201
Supplying murum having PI < 6 at the road side,
including conveying and stacking complete.
Cu.m.
Cu.m.

33
RD
24
Supplying soft murum at the road side, including

conveying and stacking complete.
218
SR.NO.
& CODE
No.
34
RD
25
Supplying sand at the road side, including

UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Cu.m.
285.00
56.00
Cu.m.
146.00
57.00
Cu.m.
31.00
31.00

35
RD
26
Supplying gravel at the road side, including

36
RD
27
Laying 15 cm to 23 cm trap / granite / quartzite /

gneiss stone rubble soling including hand packing
with rubble chips complete. (excluding cost of
material).
37
RD
28
Spreading gravel / sand / soft murum /avilable

murum over rubble soling /W.B.M.surface
blanketing berms etc.complete.
Cu.m.
18.00
18.00
38
RD
29A
Spreading
complete.
Cu.m.
31.00
31.00
Cu.m.
27.00
27.00
A) For Static Roller Having Weight 8 to 10 MT.
Sq.m.
13.00
3.00

MT.
Sq.m.
15.00
2.00
80 mm metal including sectioning

39
RD
29
Spreading 40 mm metal including sectioning

complete.
40
RD
32
Compacting the sub grade/gravel/ oversize

metal (200 mm loose) layers for all widths with
power roller including necessary, labour, materials
and artificial watering complete.
Spec.No.:Rd.32/Page No.205
219
SR.NO.
& CODE
No.
41
RD
33A
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sq.m.
6.00
6.00
Sq.m.
13.00
3.00

MT.
Sq.m.
17.00
3.00
Sq.m.
8.00
2.00

MT.
Sq.m.
11.00
2.00
Sq.m.
3.00
1.00

MT.
Sq.m.
5.00
1.00
Cu.m.
728.00
285.00
Picking the road surface including sectioning

complete. (WBM suface)
42
RD
35
Compacting the sub grade/gravel/ size metal

(100 mm loose) layers for all widths with
power roller including necessary, labour, materials
and artificial watering complete.

43
RD
38A
Compacting the hard murum / kankar for all

widths (200 mm. loose) with power roller
including necessary artificial watering complete.

44
RD
40A
Compacting the hard murum side widths layer

on each side with power roller including
necessary artificial watering complete .

45
RD
41A
Supplying crushed metal 40 mm of trap / granite

/ quartzite / gneiss stone metal at the road side
including conveying and stacking for use in
bituminous road work.
220
SR.NO.
& CODE
No.
46
RD
41B
Supplying crusher broken 25 mm. of trap /

granite / quartzite / gneiss stone metal at the
road side including conveying and stacking for use
in bituminous road work.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Cu.m.
747.00
303.00
Cu.m.
779.00
232.00
Cu.m.
501.00
195.00
Cu.m.
501.00
195.00
Cu.m.
475.00
171.00
Cu.m.
210.00
17.00
Sq.m.
1.00
1.00

47
RD
41C
Supplying crusher broken 20 mm. Trap / granite/

quartzite / gneiss stone aggregate at the road
side including conveying and stacking for use in
bituminous work.
48
RD
41D
Supplying crusher broken 12 mm trap / granite /

quartzite / gneiss stone aggregate at the road
side including conveying and stacking for use in
bituminous road work.
49
RD
41E
Supplying 10 mm. trap/granite/ quartzite / gneiss

stone aggregate at the road side including
conveying and stacking for use in bituminous road
work.
50
RD
41F
Supplying 6 mm trap / granite / quartzite / gneiss

stone aggragate at the road side including
conveying and stacking for use in bituminous road
work.
51
RD
41G
Supplying stone dust of trap / granite / quartzite

/ gneiss stone aggregate at the road side
including conveying and stacking for use in
bituminous road surface.
52
RD
82
Picking up loose metal including stacking at the

road side complete.
221
SR.NO.
& CODE
No.
53
Providing pick and roll surface by picking the

old WBM surface to the required standard, adding
30% of 40mm size metal and required quantity of
murum including laying sectioning, watering,
compacting with Static roller having 8 to 10MT.
with thin layer of murum blindage on carrageway,
watering and compacting by static roller, including
cost of all materials, loading, unloading, stacking
and labour etc. complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sq.m.
49.00
32.00
Cum.
768.00
16.00
Cum.
610.00
13.00
54
Granular Sub-Base with Close Graded Material
A) Plant Mix Method

Providing & laying granular sub-base using
grading II close graded Material, mixing in a
mechanical mix plant at OMC, carriage of mixed
Material to work site, spreading with motor grader
of adequate capacity having hydraulically controled
Blader in uniform layers on prepared subgrade and
compacting with Vibratory roller having static
weight of 8 to 10 MT.to achieve the 98% to
maximum dry density etc. complete.
i) Grading-II Material
B) Granular Sub-Base with Coarse Graded Material
Providing & laying granular sub-base usign
grading II material as per table 400-1 including,
spreading in uniform layers on prepared surface,
mixing by mix in place method at OMC, and
compacting with Vibratory roller having static
weight 8-10 MT to achieve the 98% of maximum
dry density so as to have CBR not less than 30, etc
complete.
i) Grading-II Material
Spec. No. M.O.R.T.& H. - 2001 Cl. 401 P. No. 101
222
SR.NO.
& CODE
No.
55
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Providing, laying, spreading and compacting WBM

with aggregates of specific grading including
spreading in uniform thickness, hand packing,
rolling with vibratory roller having static weight
8-10 MT. in stages to proper grade and camber,
applying and brooming requisite type of screening /
material same as per course aggregates binding
Materials to fill up the interstices of coarse
aggregate, watering and compacting to the
required
density
as
directed
etc.
complete.(Compacted thickness of each layer shall
be 75 mm)
(a) For grade I material, using stone screening
type B
Cum.
1079.00
146.00
(b) For grade II material, using stone screening

type B
Cum.
1180.00
146.00
Sq.m.
93.00
18.00
Spec. No. M.O.R.T.& H. - 2013 Cl. 404 P.121
56
Providing and laying Tech fab India CE marked
MORTH Needle Punched and mechanically bonded non
700
woven Geotextile indigenously manufactured from
high quality poly Propylene staple fibers
(continuous filament will not be accepted) on the
prepared subgrade for Seperation. TFI-TECHGO =
PR-15
223
SR.NO.
& CODE
No.
57
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Cum.
1444.00
275.00
Cum.
1220.00
18.00
Water Bound Macadam ( For Patch Repairs Only )

Filling pot holes & patch repairs by Providing, laying,
spreading and compacting crushed stone aggregates of
specific sizes to water bound macadam specification
including making good disturbed / erroded /
undulated portion on existing road surface. The
undulations / patches / errossion formed on
existing road surface shall be developed in regular
shape such as a square or a rectangle as per
demand of the erroded shape using chisel, making
walls of the dipression / pot holes verticle on all
sides , taking photographs / video for such spots
before , during execution & after execution of work
& loading the same on computer of sub Division /
Division office etc. complete spreading in uniform
thickness, hand packing, rolling with Static roller having
weight 8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite type of
screening/ binding Materials to fill up the interstices of
coarse aggregate, watering and compacting to the
required density as directed etc. complete.
( For Patch Repairs only )
For metal Grading - I Using stone screening type A

(13.2 mm agg.)
Spec. No. M.O.R.T.& H. - 2001 Cl. 404 P.112
58
Providing, laying, spreading and compacting graded

course aggregate confirming with table 400-13 to wet
mix macadam specification including premixing the
Material with water at OMC in mechanical mix plant
carriage of mixed Material by tipper to site, laying in
uniform layers with paver finisher in sub- base / base
course on well prepared surface and compacting
with vibratory roller having static weight 8 to 10
MT. to achieve the desired density as directed etc
complete.(Excluding transportation of materials.)
Spec. No. M.O.R.T.& H. - 2001 Cl. 406 P. 123
224
5(C) ASPHALTIC CONSTRUCTION

SR. NO.
&
CODE
NO.
59
Brooming the W.B.M. surface by wire Brushes, coir
MORTH brushes, dusting, cleaning etc. for receiving the
404
bituminous treatment complete. Brooming the Water
Bound Macadam surface by wire.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sqm.
6.00
6.00
Sqm.
130.00
10.00
Spec. No. : MORTH 404
60
RD
64
Providing single coat surface dressing on W.B.M.

road surface including supplying all materials,
preparing and cleaning the base, heating and
applying bitumen of VG-30 grade, spreading chips
use of tools, plant and equipments and rolling, with
cstatic roller of 8-10 tonnes etc. complete.
Spec. No. : MORTH 509 / Page No.194
61
RD
64
Providing single coat surface dressing on

bituminous surface including supplying all
materials, cleaning the road surface, heating and
applying bitumen of
VG-30 grade , spreading chips, use of tools, plant
and equipments and rolling, with static roller of 8-10
tonnes etc. complete.
Sqm.
88.00
10.00
62
Providing and constructing 75 mm. thick Modified

Penetraction Macadam (MPM) road surface
including all materials, preparing the existing road
surface, spreading 40 mm. stone metal layers 30%
crusher broken metal + 70% Hand broken (by
breaking rubble obtained by blasting) heating and
spraying the bitumen of VG-30 grade @ 2
Kg/sqm, spreading 12 mm.size chips compacting
with three wheel static roller having weight 8 to 10
MT. to achive the desired degree of compaction as
per Technical Specification Clause 506 etc.
complete. Including picking of existing WBM
surface. (only for patch repair)
Sqm.
195.00
11.00
Spec. No. : As direced by Engineer-in-charge
225
SR. NO.
&
CODE
NO.
,63

Penetraction Macadam (MPM)
road surface
surface, spreading 40 mm. stone layers metal 30%
crusher broken metal + 70% Hand broken metal (By
breaking Rubble obtained by blasting) , heating and
spraying the bitumen of VG-30 grade @ 2 kg / sqm ,
spreading 12mm.size chips compacting with three
wheel static roller having weight 8 to 10 MT. to achive
the desired degree of compaction as per Technical
Specification Clause 506 etc.complete, including
applying tack coat of VG 10 grade bitumen at the rate
of 0.30 Kg./ Sqm. on existing bitumen surface.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sqm.
212.00
11.00
Sqm.
158.00
9.00
64

Penetraction Macadam (MPM)
road surface
including all mataerials, preparing the existing road
surface, spreading 40mm. stone metal layers 30%
crusher broken metal + 70% Hand broken (by breaking
rubble obtained by blasting) heating and spraying the
bitumen of VG-30 grade @ 1.75 kg/sqm, spreading
12mm.size chips compacting with three wheel static
roller having weight 8 to 10 MT. to achive the desired
degree of compaction as per Technical Specification
Clause 506 etc. complete. Including picking of
existing WBM surface.
226
SR. NO.
&
CODE
NO.
65
For Patch repairs only

Filling pot holes & patch repairs by Providing and
laying 50 mm. thick Modified Penetraction
Macadam (MPM) road surface using 40 mm. stone
metal layers spread over the clean surface in
proportion of 30% crusher broken metal & 70%
Hand broken metal Hand broken metal obtained by
blasting) ,making good disturbed / erroded /
undulated portion on existing road surface, heating
and spraying the bitumen of VG-10 grade bitumen
@ 1.75 kg / sqm, spreading 12mm.size chips
compacting with three wheel roller having Static
weight 8 to 10 MT. to achive the desired degree of
compaction as per Technical Specification Clause
506 etc. complete. The undulations / patches /
errossion formed on existing road surface shall be
developed in regular shape such as a square or a
rectangle as per demand of the erroded shape using
chisel, making walls of the depression / pot holes
vertical on all sides , taking photographs / video for
such spots before , during execution & after
execution of work & loading the same on computer
of sub Division / Division office etc. complete ( Over
WBM Surface ) (For patch repairs only)
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sqm.
158.00
10.00
Sqm.
175.00
7.00

66

Penetraction Macadam (MPM) road surface
surface, spreading 40mm. stone layers metal 30%
crusher broken metal + 70% Hand broken metal (By
breaking Rubble obtained by blasting) , heating and
spraying the bitumen of VG-30 @ 1.75 kg / sqm,
spreading 12mm.size chips compacting with three
wheel Static roller having weight 8 to 10 MT. to
achive the desired degree of compaction as per
Technical Specification Clause 506 etc.complete,
including applying tack coat at the rate of 0.30 Kg./
Sqm.(on existing bitumen surface.)
227
SR. NO.
&
CODE
NO.
67
For Patch repairs only

Filling pot holes & patch repairs by Providing
and laying 50 mm. thick Modified Penetraction
Macadam (MPM) road surface using 40mm. stone
metal layers spread over the clean surface in
proportion of 30% crusher broken metal & 70%
Hand broken metal Hand broken metal obtained by
blasting) ,making good disturbed / erroded /
and spraying the bitumen of VG-10 grade @ 1.75
kg / sqm, spreading 12mm.size chips compacting
with three wheel Static roller having weight 8 to 10
MT. to achive the desired degree of compaction as
per
Technical
Specification
Clause
506
etc.complete including applying tack coat at the
rate of 0.30 Kg./ Sqm.on existing bitumen surface.
The undulations / patches / errossion formed on
existing road surface shall be developed in regular
shape such as a square or a rectangle as per
demand of the erroded shape using chisel, making
walls of the dipression / pot holes verticle on all
sides , taking photographs / video for such spots
before , during execution & after execution of work &
loading the same on computer of sub Division /
Division office etc. complete ( Over B.T.surface )
(For patch repairs only)
68
RD
64
Providing and laying single coat premix surface

dressing including supplying materials & bitumen of
VG-30 grade @ 2 kg./sqm., preparing and cleaning
the road surface, diversion, heating bitumen,
applying tack coat, mixing bitumen and chips in
bitumen mixer, laying bitumenous single coat premix
surface dressing over W.B.M. road surface
compacting by static roller having weight 8 to 10 MT.
complete.
Spec. No. : Rd. 64 / Page No. 233
228
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sqm.
186.00
10.00
Sqm.
138.00
10.00
SR. NO.
&
CODE
NO.
69
RD
63
Providing 20 mm thick open graded premix

bituminous carpet including supplying all materials &
bitumen of VG-30 grade @ 1.51 kg./sqm., preparing
and cleaning the base, heating bitumen, applying tack
coat of VG-10 grade @ 0.3 kg /sqm mixing hot
bitumen and chips, laying the carpet and compaction,
with static roller having weight 8 to 10 MT. etc.
complete. (over B.T.Surface) ( Cold mix )
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sqm.
152.00
15.00
Sqm.
169.00
13.00
Spec. No. : MORT & H 2013 Clause -510 Page No.

198 & IRC 16-2008
70
For Patch Repairs Only

Filling pot holes & patch repairs by providing &
laying 20mm thick open graded bituminous premix
carpet including supplying all materials, preparing and
cleaning the base, making good disturbed / eroded /
bitumen of VG-10 grade, applying tack coat of @
0.30 kg /sqm mixing hot bitumen & chips with VG-10
grade bitumen @ 1.51 kg./sqm., laying the carpet &
compaction with static roller having weight 8 to 10
MT. The undulation / pathches / Errossion formed
on existing road surface shall be developed in
regular shape such as a square or a rectangle as
per demand of the eroded shape using chisel,
making walls of the depression / pot holes verticle
on all sides. Taking photograph / Video for such
spots before, during execution & after execution of
work & loading the same on computer of Sub
Division / Division office etc complete.
( Cold mix over B.T. Surface)
Specification :- Rd 63 / page no. 233 & Govt. of

Mah. P.W.D. circular no. 2011/PK 467/Roads-1, dt.
21/11/2011. & IRC 16-2008
229
SR. NO.
&
CODE
NO.
71
RD
66
Providing bituminousType A liquid seal coat on

bituminous surface including supplying all
materials & bitumen of VG-30 grade preparing
existing road surface, heating and applying bitumen
@ 0.98 Kg./Sqm. by mechanical means, spreading
chips and rolling, by static roller having weight 8
to 10 MT. etc. complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sqm.
66.00
10.00
Sqm.
86.00
9.00
Sqm.
62.00
7.00
Spec. No. MORT & H 2013 Clause -511 Page No.

205
72
RD
66
Providing bituminous premix seal coat for Patch

repair works to black top surface including
supplying all materials, including all leads, preparing
existing road surface, heating and applying bitumen,
spreading chips and rolling, by static roller of 8 to 10
Tonne weight (Including cost of cleaning )
including taking photographs / Vedio for such
spots before, during & after execution of works
& loading the same on Computers of Subdivision / Division office etc. complete.
205
73
Providing bituminous Type B Premix seal coat on

bituminous surface, including supplying all
materials & bitumen of VG-30 grade @0.68 Kg/cm ,
preparing existing road surface, heating bitumen
including in suitable drum mix plant, mixing, laying
with paver finisher and rolling by static roller having
weight 8 to 10 MT. etc. complete. (Tack coat shall
not be added)
a) Laying with paver finisher
205
230
SR. NO.
&
CODE
NO.
74
Providing and laying of Type - B premix seal coat

with HMP of approprate capacity not less than 75
tonne / hour using crushed stone chipping 6.70 mm
size and penetration bitumen of VG-30 grade @
0.68 Kg / Sqm. , preparing existing road surface ,
laying with paver finisher hydrostatic with sensor
attachment and rolling by smooth wheeled static
roller having weight 8 to 10 MT. etc. complete.
(Tack coat shall not be added)
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sqm.
74.00
7.00
a) Type - A
Sqm.
176.00
2.00
b) Type - B
Sqm.
160.00
2.00
Spec. No. MORT & H 2013 Clause -511Page No.

205
75
Providing, laying and compacting of Close-Graded

Premix Surfacing / Mixed Seal Surfacing of 20 mm
thickness composed of 11.2 mm to 0.09 mm (TypeA)
or 13.2 mm to 0.09 mm (Type-B) aggregates
using bitumen of ( VG-30 Grade) for Type A @ 2.20
Kg/Sq.m & for Type B @ 1.90 Kg/Sq.m for mixing
to the required line, grade and level to serve as
wearing course on a previously prepared base,
including mixing in a hotmix plant, laying bituminous
mix with paver finisher and compacting with a
Smooth wheeled power roller 8-10 tonne capacity,
finishing to required level and grade including cost of
tack coat of VG-10 grade bitumen @ 0.3 Kg /
Sqm on B.T. surface.

192
231
SR. NO.
&
CODE
NO.
76
Providing, laying and compacting of Close - graded

premix surfacing / Mixed seal surfacing of 20 mm
thickness composed of 12.2 mm to 0.09 mm (TypeA) aggregates using bitumen of VG-30 grade for
Type A @ 2.20 Kg/Sq.m & for Type B @ 1.90
Kg/Sq.m for mixing to the required line, grade and
level to serve as wearing course on a previously
prepared base, including mixing in Batch mix type
Hotmix Plant - 80- 120 TPH Capacity with SCADA,
laying with paver finisher hydrostatic with sensor
attachment and rolling with a smooth wheeled roller
8-10 M.T.capacity, finished to required level and
grades. Including tack coat of VG-10 grade Bitumen
@ 0.30 kg/ Sq.m etc complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
a) Type - A
Sqm.
191.00
2.00
b) Type - B
Sqm.
175.00
2.00
Sqm.
22.00
2.00
Sqm.
46.00
5.00

192
77
Providing & applying tack coat of Bitumen VG-10

grade @ 0.30 Kg/Sqm. on BT Surface / granular
surface treated with primer / cement concrete
pavement by mechanical sprayers including
cleaning surface, conveying, heating and cost of
bitumen etc. complete.
Spec.No.: IRC 16-2008
169
78
Providing & applying Prime coat with Bitumen VG10 grade on WBM / WMM of granular base ,
spraying bitumen @ 0.75 kg/sqm with the help of
self propelled or towed bitumen pressure sprayer
equiped with suitable nozels to achive uniform dose,
including cleaning of road surface by power
mechanical sweepers etc. complete.
MORTH specification for Raods & Bridge work fifth
revision 2013 section 502 / Page No. 166
232
SR. NO.
&
CODE
NO.
79
Providing, laying and rolling open - graded premix

surfacing (Hot Mix Hot Laid) of 20 mm thickness
composed of 13.2 mm to 5.6 mm aggregates using
bitumen of VG-30 grade @ 1.46kg./sqm.to required
line, grade and level to serve as wearing course on
a previously prepared base, including mixing in a
suitable drum mix plant, laying with paver finisher
and rolling with a smooth wheeled roller 8-10 MT
capacity, finished to required level and grades.
Including tack coat of VG-10 grade Bitumen @
0.30kg / sqm. etc complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Sqm.
146.00
3.00
Sqm.
158.00
7.00
Spec.No.: MORT&H 2013 clause - 510 P. No.198

80
Providing, laying and rolling of open - graded

premix surfacing (Hot Mix Hot Laid) of 20 mm
thickness composed of 13.2 mm to 5.6 mm
aggregates using bitumen of VG-30 grade @ 1.46
kg./sqm. to required line, grade and level to serve
as wearing course on a previously prepared base,
including mixing in Batch mix type Hotmix Plant - 80120 TPH Capacity with SCADA, laying with paver
finisher hydrostatic with sensor attachment and
rolling with a smooth wheeled roller 8-10
M.T.capacity, finished to required level and grades.
Including tack coat of VG-10 grade Bitumen @
0.30 kg/ Sq.m etc complete.
Spec.No.: MORT & H 2013 clause 510 P. No. 198
233
SR. NO.
&
CODE
NO.
81
Providing and laying Hot Mix Hot Laid Bituminous

Macadam 50 / 75 mm Average thickness with 3.4
% bitumen of VG-30 grade by weight of total mix
for levelling course to remove irregularities, including
all material and crushed aggregates of grading II,
premixed with bituminous binder, including diversion
of traffic, heating bitumen and chips in drum mix
plant, laying bituminous macadam over a previously
prepared surface by paver finisher to the required
grade, level & alignment, including compacting with
Vibratory roller having static weight 8 to10 MT to
achieve desired density as directed by Engineer in
charge, transportation and cost of all materials,
cleaning etc. complete. (excluding tack coat)
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Cum
5960.00
34.00
Cum.
5990.00
34.00
Spec.No.:M.O.R.T.& H. 2013. Clause.No. 504 P.

No. 170
82

Macadam 50 / 75 mm Average thickness with 3.4
% bitumen of VG-30 grade by weight of total mix
for levelling course to remove irregularities, including
all material and crushed aggregates of grading II,
premixed with bituminous binder, including diversion
of traffic, heating bitumen and chips in drum mix
plant, laying bituminous macadam over a previously
prepared surface by Hydrostatic paver finisher
with sensor control to the required grade, level &
alignment, including compacting with Vibratory
roller having static weight 8 to 10 MT to achieve
desired density, transportation and cost of all
materials, cleaning etc. complete. (excluding tack
coat)
No. 170
234
SR. NO.
&
CODE
NO.
83

Macadam of thickness 50 to 75 mm with 3.4 %
bitumen of VG 30 Grade by weight of total mix for
levelling course to remove irregularities, including all
material and crushed aggregates of grading II,
premixed with bituminous binder, heating bitumen
and chips in hot mix plant, transported to site with
VTS, laying bituminous macadam over a previously
prepared surface including diversion of traffic,
finished to the required grade, level, alignment and
rolling to achieve the desired compaction with
vibratory roller having static weight 8 to10 MT to
achieve the desired compaction as per MORT&H
specification complete in all respect Using 80-120
TPH Batch mix type hot mix plant with SCADA,
Sensor
Paver,
Intelligent
Compactor
with
compaction analyzer and VSAT attachment.
(excluding cost of tack coat)
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Cum.
6230.00
34.00
Cum.
8970.00
36.00

No. 170
84
Providing and laying Bituminous Concrete of

thickness 30 to 40 mm on prepared surface with
specified graded crushed stone aggregates
premixed with Bitumen of VG 30 Grade and 2%
filler as cement by total weight of aggregate as per
Job Mix, including diversion of traffic, heating
bitumen and chips, mixing bitumen, chips and filler
in drum mix plant, transporting the mix to the work
site, laying with a paver finisher to the required
grade, level and alignment, compacting with
vibratory roller having static weight 8 to 10 MT to
achieve the desired compaction as per MORT&H
specification complete in all respect excluding cost
of tack coat. ( The rate is for Bitumen content @
5.4 % by weight of total mix )
No. 188
235
SR. NO.
&
CODE
NO.
85

premixed with Bitumen of VG-30 Grade and 2% filler
as cement by total weight of aggregate as per Job
Mix, including diversion of traffic, heating bitumen
and chips, mixing bitumen, chips and filler in hot mix
plant, transporting the mix to the work site, laying
with a hydrostatic paver finisher with sensor
control to the required grade, level and alignment,
compactiong with vibratory roller having static
weight 80 to 10 MT to achieve the desired
compaction as pre MORTH&H specification
complete in all respect excluding cost fo tack coat.
(The rate is for Bitumen content @ 5.4% by weight
of total mix)
86

No. 188
premixed with Bitumen of VG 30 Grade and 2%
filler as cement by total weight of aggregate as per
Job Mix, including diversion of traffic, heating
bitumen and chips, mixing bitumen, chips and filler
in drum mix plant, transporting the mix to the work
site with VTS, laying with a hydrostatic paver
finisher with sensor control to the required grade,
level and alignment, compacting with vibratory roller
having static weight 8 to 10 MT to achieve the
desired compaction as per MORT&H specification
complete in all respect Using 80-120 TPH Batch
mix type hot mix plant with SCADA, Sensor
Paver, Intelligent Compactor with compaction
analyzer and VSAT attachment. (excluding cost
of tack coat) ( The rate is for Bitumen content @
5.4 % by weight of total mix )
No. 188
236
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Cum.
9020.00
36.00
Cum.
9280.00
36.00
SR. NO.
&
CODE
NO.
87
Providing and laying dense graded bituminous

macadam of required thickness on prepared
surface with specified graded crushed aggregates
for base / binding course, premixed with bitumen of
VG 30 Grade and 2 % filler as cement of total
weight of aggregate as per Job Mix Formula,
transporting the hot mix to work site, laying with a
paver finisher to the required grade , level and
alignment, compacting with vibratory roller having
static weight 8 to 10 MT to achieve the desired
compaction as per MORT&H specification complete
in all respect, excluding cost of tack coat.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
a) For grading I material ( 37.5 mm nominal size )

for 75 to 100 mm thickness. Bitumen 4%
Cum.
7180.00
35.00
b) For grading II material ( 26.5 mm nominal size

) for 50 to 75 mm thickness. Bitumen 4.50%
Cum.
7750.00
35.00

Cum.
7240.00
35.00

Cum.
7800.00
35.00

No. 174
88
Providing and laying Dense Graded Bituminous

Macadam of required thickness on prepared surface
with specified graded crushed aggregates for base /
binding course premixed with bitumen of VG-30
grade and 2 % filler as cement of total weight of
aggregate as per Job Mix Formula, transporting the
hot mix to work site, laying with a hydrostatic paver
finisher with senser control to the required grade,
level and alignment,compacting with Vibratory
roller having Static weight 8 to 10 MT to achieve
the desired density as per MORT & H specification
complete in all respect, excluding cost of tack coat
etc complete.

No. 174
237
SR. NO.
&
CODE
NO.
89
Providing and laying dense graded bituminous

macadam of required thickness on prepared
surface with specified graded crushed aggregates
for base / binding course, premixed with bitumen of
VG 30 Grade and 2 % filler as cement of total
weight of aggregate as per Job Mix Formula,
transporting the hot mix to work site with VTS, laying
with a hydrostatic paver finisher with sensor
control to the required grade , level and alignment,
compacting with vibratory roller having static
weight 8 to 10 MT to achieve the desired
compaction as per MORT&H specification complete
in all respect Using 80-120 TPH Batch mix type hot
mix plant with SCADA, Sensor Paver, Intelligent
Compactor with compaction analyzer and VSAT
attachment. (excluding cost of tack coat)
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour

Cum.
7480.00
35.00

Cum.
8050.00
35.00

No. 174
90
Labour for metal patch repairs including preparing

surface, adding required quantity of metal, murum,
watering, ramming etc complete.
Sqm.
28.00
28.00
91
Labour for screening metal chips etc complete.
Cum.
33.00
33.00
238
SR. NO.
&
CODE
NO.
92
Design of overlay for existing B.T. surface with
MORTH carrying out testing by Benkelman Beam method as
per guide lines in IRC 81:1997 including design &
testing at site. The charges for transportation of
Benkelman Beam, loaded truck labour for testing
and traffic control are not included..
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Km.
5940.00
0.00
Km.
361.00
35.00
Km.
722.00
62.00
Spec. No. : As directed by Engineer in charge

93
Carrying out roughness index / road unevenness
MORTH test with car mounted / Jeep towed ARUR machine
(Automatic Road Unevenness Recorder) calibrated
from C.R.R.I. New Delhi (Central Road Research
institute) or any other equivalent authority including
taking observations, feeding data and giving
computerised test results including hire charges of
all machinary and labour etc. complete.
i) Road surface Single lane(B.T / W.B.M.) 3.75 m
width
94
i) Road surface Single lane(B.T / W.B.M.) 5.50 m. to
7.00 m width
239
SR. NO.
&
CODE
NO.
95
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Km.
361.00
35.00
Km.
13.00
1.00
i) Road surface Single lane(B.T / W.B.M.) Each

additional lane width
96
Dead Journey charges for Transporation of
MORTH machine / vehicle for Carrying out roughness index
/ road unevenness test with car mounted / Jeep
towed ARUR machine (Automatic Road Unevenness
Recorder) calibrated from C.R.R.I. New Delhi
(Central Road Research institute) or any other
equivalent authority including taking observations,
feeding data and giving computerised test results
including hire charges of all machinery and labour
etc. complete.
240
SPECIFICATIONS FOR BITUMINOUS BOUND MACADAM

Item : Providing and laying 50/75 mm thick bituminous bound macadam (BBM) road
surface including supplying all materials, preparing the existing road surface, spreading
40 mm stone metal layers, heating and spreading the bitumen, spreading 12 mm size
chips, compacting with power roller etc. complete.
(a) Including picking of existing WBM surface.
(b) Including applying tack coat at the rate of 50 Kg / 100 Sqm on existing bituminous
surface.
1.
General
The work consists of supply of all materials and labour required for providing and laying
bituminous bound macadam surface for compacted thickness of 50/75 mm. The item
includes preparing the existing road surface to receive the bituminous bound macadam
course, spreading of 40 mm size hand broken metal laying in required thickness with
compacted with static roller, heating and spraying bitumen with equipment plant etc.
spreading key aggregates, 12 mm chips and final compaction with static roller etc.
complete. The work shall be finished in accordance with the requirement of this
specification and in close conformity with grades, lines, cross sections and thickness as
per approved drawings or as directed by the Engineer in charge.
2.
Diversions
Temporary diversions shall be constructed and maintained by the contractor at his own
cost. Diversions shall be watered if dust is likely to blow on to the road being
bituminised.
3.
Materials:
(A)
Aggregates: The aggregates for providing B.B.M. surface shall comply with
specification Nos. Rd-41 for 40 mm and 12 mm size metal, and shall normally comply
with the following according to size and quality of aggregate and grade and quantities of
bitumen:
Rate of application for 100 Sqmt.
Description
75 mm
50 mm
On
On W.B.M.
On asphalt On W.B.M.
asphalt
Surface
surface
Surface
surface
a)
40 mm size hand
9.00
9.00 Cum
6.00 Cum 6.00 Cum
broken metal
Cum
b)
12 mm size chips
1.80 Cum 1.80 Cum
1.20 Cum
1.20 Cum
c)
Bitumen for
200 Kg
200 Kg
175 Kg
175 Kg
grouting I.S.grade
S35 with VG-40
(30/40) penetration
or S 65 with VG-30
(60/70)
d)
Tack coat for
50 Kg
-50 Kg
-existing bituminous
surface.
Note :Hand broken metal is preferred. However upto 30 % of total quality of 40
mm size metal, 40 mm crusher broken metal can be used.
(B)
Bitumen : The bitumen shall be paving bitumen suitable penetration grade
within the range S 35 to S 65 or A 35 to 65 (VG-40 to VG-30) (30/40 to 60/70) as per
Indian Standard Specification for 'Paving Bitumen' IS : 73-1992.
241
4.
Preparing the base :
Any pothole in the existing bituminous road surface and broken edges shall be patched
well and the surface shall be brought to correct level and camber with additional metal
and bitumen as required which will be paid separately. Before starting the work the
bituminous surface shall be swept clean of all the dirt, mud cakes, animal droppings &
other loose foreign material.
If so required by the Engineer, the contractor shall keep the side width & nearby
diversion watered to prevent dust from blowing over the surface to be bituminised.
Existing water bound macadam surface shall be picked for and surface loosened for a
depth of 2.5 cm and the picked surface shall be brought approximately to the correct
camber and section Edge line shall be correctly marked by dog belling the surface to
form a continuous vee notch.
There shall always be sufficient length of prepared surface ahead of the bituminous
surfacing operations as directed by the Engineer to keep these operations continuous.
5.
Tack coat on bitumen surface :
Applying tack coat for existing B.T.surface only at the rate of 50 Kg/100 m2 as per
specification No. RD 47.3.3.
6.
Picking of existing W.B.M. Surface :
Picking of existing W.B.M. surface for receiving bituminous bound macadam as per Rd
33.
7.
Spreading and Compaction :
7.1 : Spreading of 40 mm metal - 40 mm metal shall be spread only at the specified
rate of 9 cubic metric / 6 cubic metre per 100 sqm of area so as to form a layer over the
width of road correct camber / super elevation as required. Any foreign matter, organic
matter, dust, grass etc. shall be removed immediately. The sections shall be checked
with camber board and straight edge batten etc. Any irregularities shall be made good
by adding aggregates in case of depressions and removing aggregates from high spots
checked with camber board and straight edge batten etc. Any irregularities shall be
made good by adding aggregates in case of depressions and removing aggregates
from high spots.
7.2 : Compaction of 40 mm size metal - The surface of 40 mm metal layer after
bringing it to necessary grades and sections shall be rolled with the sue of 8 to 10
tonnes power roller. Rolling shall commence from the edges and progress towards
centre longitudinally except on super elevated portion it shall progress from the lower to
upper edge parallel to the centre line of pavement. When the roller has passed over the
whole area any high spots or depressions, which become apparent shall be corrected
by removing or adding aggregates. The rolling shall then be continued till the entire
surface has been rolled to desired compaction such that there is no crashing of
aggregates and all roller marks have been eliminated. Each pass of roller shall
uniformly overlap not less than one third of the track made in the preceding pass.
8.
Application of Bitumen :
Bitumen of I.S.grade S.35 or S.35 supplied for the work shall be heated to temperature
of 177 Celsius to 191 Celsius (350 F to 375 F) in a bitumen boiler and temperature shall
be maintained at the time of actual application. The hot bitumen shall be applied
through a pressure sprayer on the road surface uniformly at the rate of 200 Kg / 100
Sqmt. or 175 Kg / 100 Sqmt. The road surface shall be divided into suitable rectangles
marked by chalk so as to ensure correct rate of application of the bitumen.
242
9.
Key Aggregates :
On completion of bitumen application, 12 mm size key aggregate shall be spread
immediately at a uniform rate of 1.8 cubic meter / 1.2 cubic meter per 100 square meter
of area when entire surface is in hot condition. Brooms shall be used to ensure even
distribution of key aggregate.
10.
Final Compaction :
Immediately after spraying of bitumen and spreading of key aggregate, the surface
shall be rolled with a power roller to obtain full compaction and to force the blindage of
key aggregate into the interstices of the coarse aggregate. The rolling shall continue till
the asphalt surface hardens and key aggregates stop moving under poser roller.
11.
Surface finish and quality control :
The surface finish shall conform to requirements of clause 902 of specifications for
Road and bridges by Ministry of Surface Transport (copy enclosed) Quality Control Test
and their frequencies shall be as per table below :
Sr.No.
Test
Frequency
1
Quality of binder
Two samples per lot to be subjected to all or some
test as directed by the Engineer.
2
Aggregate Impact Value
One test per 200 cubic meter of aggregate.
3
4
Water absorption of
aggregates
6
7
Aggregate grading
Temperature of binder at
application.
Rate of spreading for
binder
12.
(i)
(ii)
(iii)
(iv)
(v)
(vi)
(vii)
13.
Flankiness Index and

Elongation Index
Stripping value

Initially one set of three representative specimen
for each source of supply subsequently when
warranted by changes in the quality of aggregate.
Initially one set of three representative specimen
for each source of supply subsequently when
warranted by changes in the quality of aggregate.
At regular close intervals.
One test per 500 cubic meter of area.
Items to include :
Diversions unless separately provided in the tender.
Preparing the road surface.
Applying tack coat on existing B.T. or picking the existing W.B.M. surface.
Supplying spreading and compaction of 40 mm and 12 mm size aggregate.
Supplying, heating and spraying bitumen.
Supplying, spreading and compaction of 12 mm size chips.
All labour, materials, including bitumen and aggregates used of tools,
plants and equipment for completing the item satisfactorily.
Mode of Measurement and payment: The contract rate shall be for 100 Sqm. The
measurements shall be for the width of the road as executed, limiting it to the width
specified or as ordered by the Engineer and the length measured along the center line.
The measurement dimensions shall be recorded correct upto two places of decimals of
a meter and the area worked out correct upto one place of decimal of a Sqm.
243
5(D) CONCRETE PAVEMENT

SR. NO.
&
CODE
NO.
97
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Providing and Laying in situ cement concrete of

required grade, of trap/ granite/quartzite/gneiss
metal for cement concrete pavement including
mixing in
mixer ,
ramming plywood/steel
formwork,steel centering curing , applying oil on both
side of centering compaction by vibrating using plate
, needle and screed vibrator as required brooming
concrete surface to get serration levelling the surface
to the camber as directed and curing etc. complete
including use of plastisizer as directed by Engineer
incharge.(excluding cost of reinforcement) newly laid
concrete shall be covered by gunny bag plastic,
tarpolin etc.(wooden centering /formwork will not
allowed) as per specification given and directed by
Engineer-incharge Item include cement vata in
C.M.1:8 at 0.6 m. x 0.6 m.c/c admeasuring 80 mm.
at bottom and 40 mm.at top and depth of 75 mm. and
maintaining the same throughout 28 days curing
period and removing the same thereafter by using
light tools without damaging pavement as directed by
Engineer-incharge.
(including initial lead of 5 Km)

As directed by Engineer-incharge.
By using NonTilting Mixer & Weight batcher of
approved quality
a) M-30 Grade
Cu.m.
5401.00
474.00
b) M-35 Grade
Cu.m.
5505.00
474.00
c) M-40 Grade
Cu.m.
5574.00
474.00
244
SR. NO.
&
CODE
NO.
98
99
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Providing and laying ready mix Cement concrete

pavement of M-30 grade with 25% fly Ash of trap /
granite / quartzite /gneiss metal including mixing in
ready mix plant of approved make including
transportation of concrete mix for wearing course ,
including plywood/steel formwork, steel centering and
compaction by vibrating using plate, needle and
screed vibrator as required grooming the concrete
surface to get serrations leveling to the surface as
directed & curring etc. complete including use of
plastisizers and retarders as directed by engineer in
charge (excluding cost of reinforcement) Newly laid
concrete shall be covered by gunny bag, plastic,
tarpolin, etc. (Wooden centering / formwork will not
be allowed) as per specification given and directed by
Engineer in charge. Item includes cement vata in CM
1:8 at 0.60 m x 0.60 m centre to centre admeasuring
80 mm at bottom and 40 mm at top & depth of 75 mm
and maintaining the same throughout 28 days curring
period and removing the same
thereafter by using light tool without damaging
pavement (Including transportation of Concrete
mix up to work site & including initial lead of 5.00
Km for raw materials up to plant site).
a) M-30 Grade
Cu.m.
5668.00
173.00
b) M-35 Grade
Cu.m.
5723.00
173.00
c) M-40 Grade
Cu.m.
5777.00
173.00
No.
234.00
31.00
Providing and fixing in position mild steel dowel

bars precoated with anticorrosive epoxy paint of
32 mm. Dia. 60 cms. Long and at 30.00 cm. C/C &
wherever directed including handling, straightening,
necessary cutting supported by HYSD chairs with
proper alignment by using properly designed
assembly of Bulkheads lubricating half length with
bituminous paint as directed etc. complete.
245
SR. NO.
&
CODE
NO.
100
Providing and fixing in position HYSD tie bars

precoated with anticorrosive epoxy paint of 12
mm dia. 70 cms.long and at 30.00 cm. C/C &
wherever directed including handling, straightening
wrapping with paper of approved quality for half
length, necessary cutting, handling, straightening ,
supported by assembly of HYSD chairs with proper
alignment etc. complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
No.
28.00
5.00
Rmt.
68.00
22.00
Rmt.
205.00
10.00
101
Cutting transverse contraction joints 3 to 4 mm

wide and depth 60mm. .in concrete slab using
concrete cutting machine with diamond studded saw
within 48 hours of casting of bay / slab etc. complete
including subsequent widening of the groove 8 to 10
mm. wide at top having depth of 15 mm. as directed
by Engineer incharge.
102
Providing to contraction joints polysuphide

sealent (Pouring grade) confirming to BS : 5212 1989 into sawed groove widened at top for sealent
reservoir of specified size and shape as per detailed
drawing including fixing Polyethylene foam back up
rod of required diameter (appraox. 25% larger than
the initial 3 mm.to 4 mm. joint) overlaid with bond
breaking tape as per detailed drawing. Item includes
cleaning the joints with water jet / air compressor &
allowing joint to become thoroughly dry before sealent
is applied and applying primer.
(A) Contraction & longidudinal joints (15 mm. deep x
8 mm.wide)
246
SPECIFICATIONS FOR RIGID PAVEMENT

1.
Scope
1.1
The work shall consist of construction of unreinforced dowel jointed plain

cement concrete pavement in accordance with the requirement of these
specifications and in conformity with the lines, grades and cross section
shown on the drawing or as directed by the Engineer-in-Charge. The work
shall include furnishing of all plants and equipments, materials and labour
and performing all operations in connection with the work as approved by
the Engineer-in-Charge.
The design parameters viz. thickness of pavement slab, grade of concrete,
joint details etc. shall be as stipulated in the drawings.
1.2
2.
Materials
2.1
Source of Materials :
The Contractor shall indicate to the Engineer-in-Charge the source of all
materials to be used in the concrete work sufficiently in advance, and the
approval of the Engineer-in-Charge for the same shall be obtained before
the scheduled commencement of the work. If the Contractor later
proposes to obtain materials from a different source, he shall notify the
same to Engineer-in-Charge for his approval before such materials are to
be used.
Cement :
Ordinary Portland Cement for use on the works shall comply in every
respect with the requirements of the IS-8112 amended from time to time.
The cement used in the works shall be manufactured in India and shall be
of a make and quality approved by the Engineer-in-Charge. Only 43 grade
Ordinary Portland Cement shall be used. The Contractor shall provide and
maintain proper and sufficient storage sheds for the cement on the
worksite. The floor of the stores shall be raised at least 23 cm. from the
ground in order to protect the bags from moisture. Cement damaged by
exposure or otherwise will not be allowed to be used in the Work and
same shall be removed from the site at once.
2.2
2.3
Admixtures :
Admixtures conforming to IS : 9103 and IS : 6925 shall be permitted to
improve workability of the concrete or extension of setting time on
satisfactory evidence that it will not have any adverse effect on the
properties of concrete with respect to strength, volume change, durability
and has no deleterious effect on steel bars. The particulars of the
admixture and the quantity to be used, must be furnished to the Engineer in-Charge in advance to obtain his approval before use.
247
2.4
Coarse Aggregate :
(i)
(ii)
Aggregates for pavement concrete shall be natural material

complying with IS : 383 with a Los Angeles Abrasion Test limits not
more than 35 percent. The limits of deleterious materials shall
not exceed the requirements set out in IS : 515. No aggregate
having water absorption more than 2% shall be used.
Coarse aggregate shall consist of clean, hard, strong, dense, non
porous and durable pieces of crushed stone or crushed gravel and
shall be devoid of pieces of disintegrated stone, soft, flaky
elongated, very angular or splintery pieces. The maximum size of
coarse aggregate shall be 20 mm. for M-40 grade pavement
concrete and for dense lean concrete (DLC) it shall be 25 mm.
Continuously graded or gap graded aggregates may be used as
stipulated in IRC 44 and IRC 59 respectively, depending on the
grading of the fine aggregate.
The aggregate shall not be alkali reactive. Dumping and stacking of
aggregates shall be done in an approved manner. In case the
Engineer-in-Charge considers that the aggregate are not free from
dirt, the same may be washed and drained for at least 72 hours
before batching as directed by the Engineer-in-Charge. In such
situation the absorbed moisture content shall be carefully monitored
for controlling water cement ratio.
(iii)
Fine Aggregate :
The fine aggregate shall consist of clean, natural sand conforming
to IS:383. Fine aggregate shall be free from soft particles, clay,
shale, loam, cemented particles, mica and organic and other foreign
matter.
(iv)
2.5
Sand shall be of approved quality with fineness modulus between

2.4 to 3.0 as per approved mix design. The same will have to be
screened to remove the oversize particles and washed to reduce
the silt contents below 4% by volume after 24 hour and to bring it
within the permissible range of fineness modulus. Blending of sand
of fine and coarse quality may be permitted to achieve the required
FM if it is found necessary to give desired results. The fine
aggregates will be tested and retested as directed by the Engineerin-Charge till they satisfy the required norms as per IS and as
specified above.
Water :
Water used for mixing and curing of concrete shall be clean and free from
injurious amount of oil, salt, acid, vegetable matter, or other substances
harmful to the finished concrete. It shall meet the requirements stipulated
in IS : 456-2000.
248
2.6
(i)
The rate proposed in this tender for all concrete and allied works
are inclusive of water cost. The Contractor shall have to make their
own arrangements at their cost for bringing adequate water of
potable quality for mixing concrete, curing purposes and for this no
extra payment will be made.
(ii)
The water brought for concreting and curing etc. shall be got tested
from the laboratory as approved by Engineer-in-Charge to verify
whether it is suitable for above purposes whenever directed. This
testing will be done at Contractors cost.
Premoulded Joint Filler :

Premoulded joint filler for expansion joint shall be of thickness shown in
the drawing with tolerance of + 1.5 mm. It shall be 25 mm. less in depth
than the thickness of the slab with tolerance of + 3 mm. and provided to
the full width between side forms. Holes to accommodate dowel bars shall
be accurately bored or punched out to give a sliding fit on the dowel bars.
The joint filler shall comply with the requirements of IS:1838 Part I and II
Specifications for Premoulded fillers for Expansion joint in concrete.
2.7
Joint sealing compound :

Cold applied sealent Polysulphide base (Pouring Grade) conforming to
BS-5212 Part II and IS 11433 shall be used. If primers are recommended
by the manufacturer, they shall be applied neatly with an appropriate
brush.
2.8
Steel :
The steel shall conform to the requirement of IS : 432, IS : 1139 and IS :
1786 as relevant. The dowel bars shall conform to Grade S 240 and tie
bars to grade S 425 of IS. If steel mesh is used, it shall conform to IS :
1566. The steel shall be coated with epoxy paint for protection against
corrosion.
3.
Proportion of concrete mix
3.1
Immediately upon the receipt of work order, the Contractor shall inform the
Engineer-in-Charge the exact location of source of the accepted materials.
After approval of all the materials to be used in Pavement Quality
Concrete, the Contractor shall submit the mix design based on proportion
by weight of all ingredients for the approval of Engineer-in-Charge. The
mix design shall be submitted to the Engineer-in-Charge at least one
month in advance of commencing the paving operation.
249
3.2
For design of cement concrete mixes guidance may be had from IRC-44
Tentative guidelines for cement concrete mix design for road pavement
and IS-10262 and IS-SP-23 Hand book on concrete mixes.
The minimum cement content for Dry Lean Concrete and Pavement
Quality Concrete shall be as follows :
Dry Lean Concrete (DLC)
Grade M-10
220 Kg. per Cum.
Pavement Quality Concrete (PQC) Grade M-40
350 Kg. per Cum.
If this minimum cement content is not sufficient to produce in the field,
concrete of the strength specified in the design, it shall be increased as
necessary without additional compensation under the Contract. The
maximum cement content shall, however, not exceed the limits as
specified in relevant IRC Codes.
3.3
3.4
Specification criteria for mix design.

a)
Cement content
b)
W/C ratio
c)
Cement
As specified in Work Specific
d)
MSA
technical specifications.
e)
Flexural strength
Concrete Strength :
3.4.1 Even though, it is the obligatory duty of the Contractor to have an up to

date laboratory at site as stipulated under subsection B of section V of this
volume and carryout the necessary tests as per standard forms in this
laboratory, they shall submit at least, once in two weeks, additional 3
cubes of M-40 cement concrete work for testing at the approved
Laboratory for 28 days strength, 3 flexural beams alongwith the
corresponding 3 C.C. cubes for testing flexural as well as compressive
strength. The Contractor shall arrange to send the cubes and flexural
beams to approved material testing laboratory at least seven days before
the date of testing of the cubes, failing to which penalty of Rupees 500/per day will be imposed and recovered from the Contractor's bill. The
charges for the testing of cubes and beams shall be borne by the
Contractor.
The cubes shall also be tested for 7 days and 28 days strength at the
Contractors laboratory in the presence of Engineer-in-Charge or his
representative. Whenever any material, cubes and beams are required to
be sent to the Regional/ District Laboratory, the same shall be transported
to the Government Laboratory by the Contractor at his own cost. However,
the Contractor shall cast cubes during concreting of each slab and test the
cubes at field laboratory in accordance with IS : 516 for 7 days and 28
days strength. The acceptance criteria for test result shall be in
accordance with IS4562000.
250
3.4.2 While designing the mix in the laboratory, correlation between flexural and
compressive strength of concrete shall be established on the basis of tests
on samples for any adjustment in design. However, be ensured that in
such case the materials and mix proportions remain unaltered. The water
content shall be the minimum required to provide the specified workability
for full compaction of the concrete to the required density.
3.4.3 At least three cube specimens, one each for 7 days and 28 days strength
testing, shall be cast for every 50 Cum. or part thereof of concrete placed
during construction. On each day's work, not less than nine cubes shall be
cast and the same shall be tested in presence of the Engineer-in-Charge
or his representative in accordance with the testing procedure.
3.4.4 The ratio between the 7 and 28 days strength shall be established for the
mix to be used in the slab in advance, by trial design mix. The average
strength of the 7 days cubes shall be divided by the average strength of
the 28 days for each work and the ratio 'R' shall be determined. The ratio
'R' shall be expressed to three decimal places.
3.4.5 If during the construction the value of 7 days test results fall below the
required 7 days strength as per the design mix then the cement content of
the concrete shall , without extra payment, be increased by 5%. The
increased cement content shall be maintained atleast until the 28 days
strength have been assessed for its conformity with the requirements.
Whenever the cement content is increased, the concrete mix shall be
readjusted to maintain the required workability.
3.4.6 In case the cube test for 28 days period fails, cores shall be taken from the
concrete slab and will be tested at Contractor's cost. The core will be 100
mm dia. If it fails, action as contemplated here under clause no 9.4.12
shall be taken.
3.4.7 The density of the compacted concrete shall be such that the total air
voids are not more than 3%. The air voids shall be derived from the
difference between the theoretical maximum dry density of the concrete
calculated from the specific gravities of the constituents of the concrete
and mix. The average value of three direct density measurements made
on cores of at least of 150 mm diameter. If the average of any two
consecutive measurements of density of core is below the minimum
required, the extent of defective concrete shall be determined by additional
cores as directed by the Engineer-in-Charge and if required the concrete
shall be removed and replaced with new materials in accordance with the
specification.
3.4.8 All cores taken for density measurements shall also be checked for
thickness . In case of doubt, additional cores may be ordered by the
Engineer-in-Charge and taken at locations decided by him to check the
depth or density of concrete slab without any compensation being paid for
the same. Thickness of the slab at any point checked as mentioned above
shall be within a tolerance of 5mm. of the specified thickness as per
251
drawing. The cost of core samples to be taken and their testing shall be
borne by the Contractor. The test samples shall be taken by the agencies
approved by the Superintending Engineer.
3.4.9 In calculating the density, allowance shall be made for any steel in cores.
Cores shall be reinstated with compacted concrete with mix proportions of
1 part of Portland cement, 2 parts of fine aggregate and 2 parts of 10 mm
nominal size single sized coarse aggregate by weight or as directed by the
Engineer-in-Charge at the Contractors cost. In case the cores are taken
from the road already opened to traffic, the mix/material adopted for filling
shall be such as will develop the requisite strength in a minimum of time.
The holes created by cores shall be so filled that these do not shrink, if
necessary non-shrink grout shall be used by the Contractor at his own
cost.
3.4.10 At each site of work, minimum 6 cores shall be taken for testing. Core
density test shall be carried out in accordance with relevant I.S. codes. For
testing of cores for strength, refer para 9.4.11 below.
3.4.11 The results of crushing strength tests on these cores shall not be less than
0.8 times the corresponding cube crushing strength requirement, where
the height to diameter ratio of the core is two. Where height to diameter
ratio is varied, then the necessary corrections would be made in
calculating the crushing strength of cores in the following manner.
The crushing strengths of cylinders with height to diameter ratio between 1
and 2 may be corrected to correspond to the standard cylinder of height to
diameter ratio of 2 by multiplying with the correction factor obtained from
the following equation:f =
0.11 n + 0.78
f =
n =
Correction factor and

height to diameter ratio
Where
The corrected test results shall be analysed for conformity with the
specification requirements for cube samples. Where the core tests are
satisfactory, they shall have precedence for assessing concrete quality
over the results of moulded specimens. The diameter of cores shall not be
less than 150 mm.
3.4.12 If the tests on cores of the concrete is not satisfying the strength
requirements, then the payment for the slab shall be withheld for the
period as decided by Engineer-in-Charge. Slab under reference shall be
kept under observation during this period and if defects are noted, then
further course of action as deemed fit including replacement of the slab will
be taken as decided by the Superintending Engineer, whose decision will
be final. In such cases, the decision of the Superintending Engineer,
regarding release of payment, fully or partly, on such slabs, will be binding
on the Contractor.
252
3.4.13 Acceptance criteria for concrete

Average 28 days flexural strength of the batch of 4 beams should not be
less than the specified characteristic strength plus 0.3 mpa. Any concrete
that fails to meet the strength specified shall be removed and replaced at
Contractor's expense.
3.5
Workability
3.5.1 The workability of the concrete at the point of placing shall be adequate for
the concrete to be full compacted and finished without undue flow. The
optimum workability for the mix to suit the paving plant being used shall be
determined by the Contractor and approved by the Engineer-in-Charge.
3.5.2 The workability shall be determined by the compacting factor test or VeeBee test in accordance with IS 1199 at the minimum rate of one test per
50 cum of concrete or 5 times per day whichever is greater. Tests for
workability shall be carried out at the point of placing in conjunction with
tests for strength. The workability shall be maintained at the optimum
within the range of Compacting factor as Specified in Work specific
technical specifications.
3.5.3 Any alteration to the optimum workability necessitated by change in
conditions shall be rejected only after the same is agreed to by the
Engineer-in-Charge. If any determination of the workability gives a result
outside the tolerance further test shall be made immediately on the next
available load of concrete. The average of two consecutive results and
the difference between them shall be calculated, if the average is not
within 0.03 C of the optimum value or the difference is greater than 0.06
for CF or other value agreed with the Engineer-in-Charge subsequent
samples shall be taken from the delivery vehicle which shall not be
allowed to discharge into the works until compliance with the specification
has been established.
3.6
Design Mix
3.6.1 The Contractor shall carry out laboratory trials of design mixes with the
materials from the approved sources to be used. Trial mixes shall be
made in presence of the Engineer-in-Charge or his representative and
shall be subject to the approval of the Engineer-in-Charge. They shall be
repeated, if necessary until the proportions that will produce a concrete
which complies in all respects with this specification, and conforms to the
requirement of the design/drawings has been determined.
3.6.2 The proportions determined as a result of the laboratory trial mixes may be
adjusted if necessary during start of the construction. Thereafter, neither
the materials nor the mix proportions shall be varied in anyway except with
the written approval of the Engineer-in-Charge.
253
3.6.3 Any change in the source of materials or mix proportions proposed by the
Contractor during the course of work shall be assessed by making
laboratory trial mixes unless approval is given by the Engineer-in-Charge
for minor adjustments like compensation for moisture content in
aggregates or minor fluctuations in the grading of aggregate.
4.
Separation Membrane
5.
A separation membrane shall be used between the concrete slab and the
DLC. Separation membrane shall be impermeable plastic sheeting 125
microns thick laid flat without creases. Before placing the separation
membrane, the DLC shall be swept clean of all the extraneous materials
using air compressor. Where overlap of plastic sheet is necessary, the
same shall be at least 300 mm and any damaged sheeting shall be
replaced. The separation membrane may be stuck to the lower layer wild
patches of adhesives or appropriate tape or concrete nails with washer so
that sheet does not move during placement of concrete.
Forms
5.1
Steel Forms
All side forms shall be of mild steel only. The steel forms shall be mild
steel channel sections of depth equal to the thickness of the pavement or
a few millimeters less than the thickness of the pavement to match with
the plus level tolerances specified for sub-base. In the latter case, the
forms shall be leveled by using metal wedges or shims. The thickness of
flange and web shall not be less than 6 mm. and shall be capable of
resisting all loads applied in the paving process. The length of form shall
not be less than 3m except in the case of installations along curves. The
sections shall have a length of at least 3 m except on curves of less than
45 m radius, where shorter sections may be used. When set to grade and
staked in place, the maximum deviation of the top surface of any section
from a straight line shall not exceed 2 mm in the vertical plane and 5 mm
in the horizontal plane. The method of connection between sections shall
be such that the joint formed shall be free from difference in level, play of
movement in any direction. The use of bent, twisted or worn-out forms will
not be permitted. At least three stake pockets for bracing pins of minimum
25 mm dia or stakes shall be provided for each 3m of form and the bracing
and support must be ample to prevent springing of the forms under the
pressure of concrete or the weight or thrust of machinery operating on the
forms.
5.2
Setting of Forms
The forms shall be jointed neatly and shall be set with exactness to the
required grade and alignment. Both before and after the forms are placed
and set, the subgrade or sub-base under the forms shall be thoroughly
tamped in an approved manner. Sufficient rigidity shall be obtained to
support the forms in such a position till during the entire operation of
compacting and finishing of concrete they shall not at any time deviate
254
more than 3 mm from a straight edge 3 m in length. Forms which show a

Variation from the required rigidity or alignment and levels shown in the
drawing, shall be reset or removed, as directed. The length and number of
stakes shall be such as to maintain the forms at the Correct line and
grade. All forms shall he cleaned and oiled each time before they are
used. Forms shall be set ahead of the actual placing of concrete for the
entire day's work.
6.
Joints
The location and type of joint shall be as shown in the drawing. Joint shall
be constructed depending upon their functional requirement as detailed in
the following paragraphs. The location of the joints should be transferred
accurately at the site and mechanical saw cutting of joints done as per
stipulated dimensions. It should be ensured that the full required depth of
cut is made from edge to edge of the pavement. Sawing of joints shall be
carried out with diamond studded blades soon after the concrete has
hardened to take the load of the sawing machine and personnel without
damaging the texture of the pavement. Sawing operation could start as
early as 6-8 hours depending upon the season.
6.1
Transverse joints
Transverse joints shall be contraction and expansion joints constructed at
the spacing described in the Drawings. Transverse joints shall be straight
within the following tolerances along the intended line of joints which is the
straight line transverse to the longitudinal axis of the carriageway at the
position proposed by the Contractor and agreed to by the Engineer-inCharge except at road junctions or roundabouts where the position shall
be as described in the drawings.
6.1.1 Deviations of the filler board in the case of expansion joints from the
intended line of the joint shall not be greater than 10 mm.
6.1.2 The best fit straight line through the joint grooves as constructed shall be
not more than 25 mm from the intended line of the joint.
6.1.3 Deviations of the joint groove from the best fit straight line of the joint shall
not be greater than 10 mm.
6.1.4 Transverse joints on each side of the longitudinal joint shall be in line with
each other and of the same type and width. Transverse joints shall have a
sealing groove which shall be sealed in compliance with Clause 602.11 of
MORT and H specifications (Fourth Revision)
6.2
Contraction joints
Contraction joints shall consist of a mechanical sawn joint groove, 3 to 5
mm wide and 1/4 to 1/3 depth of the slab 5 mm or as stipulated in the
drawings and dowel bars complying with Clause 602.6.5 of MORT and H
255
specifications (Fourth Revision)and as detailed in the drawings. The

contraction joints shall be cut as soon as the concrete has undergone
initial hardening and is hard enough to take the load of joint sawing
machine without causing damage to the slab.
6.3
Expansion joints
The expansion joints shall consist of a joint filler board complying with
Clause 602.2.7 of MORT and H specifications (Fourth Revision) and dowel
bars complying with Clause 602.6.5 MORT and H of specifications (Fourth
Revision)and as detailed in the drawings. The filler board shall be
positioned vertically with the prefabricated joint assemblies along the line
of the joint within the tolerances given in Clause 602.6.2.1 of MORT and H
specifications (Fourth Revision) and at such depth below the surface as
will not impede the passage of the finishing straight edges or oscillating
beams of the paving machines. The adjacent slabs shall be completely
separated from each other by providing joint filler board. Space around
the dowel bards, between the sub-base and the filler board shall be
packed with a suitable compressible material to block the flow of cement
slurry.
6.4
Longitudinal joint
The longitudinal joints shall be saw cut as per details of the joints shown in
the drawing. The groove may be cut after the final set of the concrete.
Joints should be sawn to at least 1/3 the depth of the slab 5 mm as
indicated in the drawing.
7.
Dowel bars
7.1
Dowel bars shall be mild steel rounds in accordance with MORT and H
specifications (Fourth Revision) Clause 602.2.6 with details / dimensions
as indicated in the drawing and free from oil, dirt, loose rust or scale. They
shall be straight, free of irregularities and burring restricting slippage in the
concrete. The sliding ends shall be sawn or cropped cleanly with no
protrusions outside the normal diameter of the bar. The dowel bar shall be
supported on cradles/dowel chairs in pre-fabricated joint assemblies
positioned prior to the construction of the slabs or mechanically inserted
with vibration into the plastic concrete by a method which ensures correct
placement of the bars besides full recompaction of the Concrete around
the dowel bars. The dowel used in contraction joint shall be provided with
plastic sheath with closed end over 60 per cent of the length. The dowels
also can be coated with polyethylene. The thickness of sheath or
polyethylene coating shall not exceed 0.50 mm.
7.2
Unless shown otherwise on the drawing dowel bars shall be portioned at

mid depth of the slab within a tolerance of + 20 mm and centered equally
256
about intended lines of the joint within a tolerance of + 25mm. They shall
be aligned parallel to the finished surface of the slab and to the centre line
of the carriageway and to each other within tolerance as given hereunder.
7.2.1 For bars supported on cradles prior to the laying of the slab .
a)
All bars in a joint shall be within 3 mm per 300 mm length of bar.
b)
2/3rd of the bars shall be within 2 mm per 300 mm length of bar
c)
No bar shall differ in alignment from an adjoining bar by more than
3 mm per 300 mm length of bar in either the horizontal or vertical
plane.
d)
Cradles supporting dowel bar shall not extend across the line of
joint i.e. no steel bar of the cradle assembly shall be continuous
across the joint.
7.2.2 For all bars inserted after laying of the slab.
a)
Twice the tolerance for alignment as indicated in (a) above. Dowel
bars supported on cradles in assemblies, when subject to a load of
110 N applied at either end and in either the vertical or horizontal
direction (upwards and downwards and both directions horizontally)
shall conform to be within the following limits.
i)
Two thirds of the number of bars of any assembly tested
shall not deflect more than 2 mm per 300 mm. length of bar.
ii)
The remainder of the bars in that assembly shall not deflect
more than 3 mm per 300 mm length of bar
Dowel bars shall be covered by a thin plastic sheath for at least 60 per
cent of the length from one end, for dowel bars in contraction joints or half
the length plus 50 mm for expansion joints. The sheath shall be tought,
durable and of an average thickness not greater than 0.5 mm and shall
have closed end. The sheathed bar shall comply with the following pull
out test.
7.4
Four bars shall be taken at random from stock and without any special
preparation shall be covered by sheaths as required in above Clause. The
ends of the dowel bars which have been sheathed shall be cast centrally
into concrete specimens 150x150x600 mm. made of the same mix
proponions to be used in the pavement, but with a maximum nominal
aggregate size of 20 mm and cured in accordance with IS 516. At 7 days
a tensile load shall be applied to achieve a movement of the bar of at least
0.25 mm. The average bond stress to achieve this movement shall not be
greater than 0.14 MPa.
7.5
For expansion joints, a closely fitting cap 100 mm long with closed end
consisting of GI pipe 3 mm thickness with closed ends shall be placed
over the sheathed end of each dowel bar. An expansion space at least
equal in length to the thickness of the joint filer boards shall be formed
between the end of the cap and the end of the dowel bar by using
compressible sponge to block the entry of cement slurry between dowel
and cap. It may be taped all round.
257
8.
Tie bars
8.1
The bars in longitudinal joints shall be plain mild steel bars conforming to
IS: 432 or deformed steel bars complying with IS: 1786 and in accordance
with the requirements given below. The bars shall be free from oil, dirt,
loose rust and scale.
Tie bars projecting across the longitudinal joint shall be protected from
corrosion for 75 mm on each side of the joint by a protective coating of
bituminous paint with the approval of the Engineer-in-Charge. The coating
shall be dry when the tie bars are used.
8.2
Tie bars in longitudinal joints shall be made up into rigid assemblies with
adequate supports and fixings to remain firmly in position during the
construction of the slab. Alternatively, tie bars at longitudinal joints may be
mechanically or manually inserted into the plastic concrete from above by
vibration using a method which ensures correct placement of the bars and
recompaction of the concrete around the tie bars. Tie bars are also
inserted mechanically or manually from sides. During side insertion in
fixed form paving they may be bent so that half length remains along the
form. After removal of forms, bars shall be straightened so that they
extend into the concrete placed on the other side of the concrete.
8.3
Tie bars shall be positioned to remain within the middle third of the slab
depth as indicated in the drawings and approximately parallel to the
surface and approximately perpendicular to the line of the joint, with the
centre of each bar on the intended line of the joints within a tolerance of
50 mm, and with a minimum cover of 30 mm below the joint groove .
9.
Weather and seasonal limitations
9.1
Concreting during Monsoon Months

When concrete is being placed during monsoon months and when it may
be expected to rain, sufficient supply of tarpaulin or other waterproof cloth
shall be provided along the line of work in addition to the portable tents.
Any time when it rains, all freshly laid concrete which had not been
covered for curing purposes shall be adequately protected by means of
tarpaulins or other waterproof cloth. Any damage caused to the surface or
texture shall be corrected as decided by the Engineer.
9.2
Concreting in Hot Weather:

As placing of concrete in air temperatures above 35 C, is associated with
defects, like loss of workability through accelerated setting, formation of
plastic shrinkage cracks, etc. it is recommended that unless adequate
precautions are taken no concreting shall be done in conditions more
severe than the above. The procedures recommended for adoption in
case of hot weather concreting are given in IRC:61" Tentative Guidelines
for the Construction of Cement Concrete Pavements in Hot Weather."
258
9.3
The execution of work shall only be allowed for ambient temperature not
exceeding 35C. The time for execution of C.C. pavement i.e. the laying of
DLC and PQC shall be 6 P.M. to 2 AM next day. The Contractor will have
to ensure, adequate lighting arrangement during the night working.
10.
Joint construction
The placement of concrete at construction joint is particularly critical
Therefore, care must be taken to ensure that only quality concrete is used
in their construction. The concrete used to construct these joints should
be the same as for the remainder of the slab. The practice of modifying
the mix at the joints is not recommended. It should be kept in mind that
load transfer across a doweled joint is greatly affected by the quality of
concrete and compaction around the dowels. The placement of Dowels
should be carefully verified soon after paving begins.
10.1
Sawing
10.1.1 It is recommended that all joints be sawed. The sawing of transverse

contraction and longitudinal joints should be a two phase operation. The
initial sawing is intended to cause the pavement to crack at the intended
joint. It should be made to required depth as directed. The second sawing
provides the necessary shape factor for the Sealant material.
10.1.2 When a lengthy period is anticipated between the initial sawing of the joint
and the final sawing and sealing, consideration should be given to filling
the joint with a temporary filler. This filler material should keep any loose
material out of the joint and reduce the potential for spalling.
10.2
Cleaning joints
Air compressors use for cleaning joints shall be equipped with suitable
traps capable of removing all surplus water and oil in the compressed air.
Immediately after sawing the joint the resulting slurry shall be completely
removed from the joint and immediate area by flushing with a jet of water
under pressure.
10.3
Installing Backup material

A resilient rod type backup material will be installed in a manner that will
produce the shape factor specified. If the sealant bonds to the backup
material, a bond breaking tape is essential.
11.
Surface Texture
After the final regulation of the slab and before the application of the curing
membrane, the surface of Concrete slab shall be brush textured in a
direction at right angles to the longitudinal axis of the carriageway. For
details reference shall be made to clause No. 9.9.4 of IRC-15-2002.
259
12.
Surface Tolerances
The levels of the subgrade and different pavement courses as
constructed, shall not vary from those calculated with reference to the
longitudinal and cross profile of the road shown on the drawings or as
directed by the Engineer-in-Charge beyond the tolerances mentioned
below.
12.1
Tolerances in surface levels.
Sub grade
Granular Sub-base/WBM Layer
Dry lean concrete or rolled concrete
Cement concrete pavement.*
+ 20 mm
-- 25 mm
+ 10 mm
-- 20 mm
+ 10 mm
-- 10 mm
+ 5 mm
-- 6 mm
This may not exceed -8 mm at 0-30 cm from the edges.
Provided, however that the negative tolerance for wearing course shall not
be permitted in conjunction with the positive tolerance for base/sub course.
12.2
For checking compliance with the above requirement for subgrade , sub
base courses, measurements, of the surface levels shall be taken on a
grid of point placed at 6.25 m longitudinally and 3.5 m transversely or any
other grid approved by the Engineer-in-Charge. For any 10 consecutive
measurements taken longitudinally or transversely, not more than one
measurement shall be permitted to exceed the tolerance as above. This
one measurement being not in excess of 5 mm greater than the permitted
tolerance.
12.3
For checking compliance with the above requirement for concrete

pavements measurements of the surface levels shall be taken on a grid of
6.25 m x 3.5 m or 3.75m or any other grid directed by the Engineer-inCharge. In any length of pavement, compliance shall be deemed to be
met for the final road surface, only if the tolerance given above is satisfied
for any point on the surface.
12.4
Surface regularity of pavement courses.

The longitudinal profile shall be checked with a 3 metre long straight
edge/moving straight-edge as desired by the Engineer-in-Charge at the
middle of each traffic lane along a line parallel to the centre line of the
road.
The maximum permitted number of surface irregularities shall be as per
Table below.
260
Irregularity
Length (m)
National Highways/
Expressways
Roads
of
lower
category
Surface of Carriageways and paved shoulders

4 mm
7 mm
300
75
300
75
20
9
2
1
40
18
Note : Category of each section of road as described in the Contract.

12.5
The maximum allowable difference between the road surface and

underside of a 3 m straight-edge when placed parallel with, or at angles to
the centre line of the road at points decided by the Engineer-in-Charge
shall be:
For pavement surface
4 mm
For granular sub-base/base courses and
sub-bases under concrete pavements
10 mm
12.6
Horizontal alignment
The horizontal alignment shall be checked with respect to the centre line of
the carriageway as shown in the drawings. The edges of the carriageway
as constructed shall be corrected within a tolerance of 10 mm therefrom.
12.7
Acceptance criteria for cracked concrete slabs:

Concrete slabs may develop cracks of minor to serious nature unless
appropriate precautions are taken to prevent their occurrence either during
the construction phase or post-construction period. Cracks can appear
generally due to the following reasons.
12.7.1
Plastic shrinkage of concrete surface due to rapid loss of moisture
12.7.2
Drying shrinkage
12.7.3
High wind velocity associated with low humidity
12.7.4
High ambient temperature.8
12.7.5
Delayed sawing of joints
12.7.6
Rough and uneven surface of the base on which concrete slabs

are constructed.
12.7.7 Combination of the above factors.

The slabs with full depth cracks are totally unacceptable as it amounts to
structural failure. Besides, other cracks which are deep and are likely to
261
progress in depth with time are also to be considered as serious in nature.

Fine crazy cracks, however, are not serious. An acceptance criteria for
cracked concrete slabs are
12.8
The concrete slabs can be accepted in the following situations:
12.8.1 Plastic shrinkage cracks- The discrete crack which is less than 500 mm
length and with its depth of penetration less than half the thickness of the
slab and which does not intersect with a longitudinal edge or formed joint.
The cumulative length of such cracks in each slab shall not be more than
1.0 m length. Cores can be cut to ascertain the depth of cracks where
doubt arises.
12.8.2 Fine hairline crazy cracks
The concrete slabs are to be rejected where the cracks formed are not
complying with the above stipulation . Therefore, the slabs which are to be
rejected are :
i)
Slabs with cracks running transversely or longitudinally penetrating
to full depth and length of the slab.
ii)
Slabs with cracks which are penetrating to more than half the
depth.
iii)
Discrete crack which is more than 500 mm length although its
depth of penetration is less than half of the depth.
iv)
When the total length of all discrete crack is more than 1.0 m whose
depth of penetration is less than half the depth.
13.
Clean Up
The pavement surface shall be swept and/or washed down to remove all
dirt, debris or foreign material prior to opening to traffic.
14.
Opening to traffic
The Contractor shall not permit traffic on the pavement until the concrete
has attained a desired compressive strength.
15.
Other Equipment
Other tools and plants required to carry out pavement concrete work are
as below.
15.1
All equipment necessary for the proper preparation of the subgrade, sub
base and batching, mixing, placing, finishing and curing of the concrete
pavement shall be on the project in good working conditions and shall
have been inspected by the Engineer-in-Charge before the paving
operations are permitted to start. Throughout the construction of the
project, the construction agency shall maintain adequate equipment in first
class working condition to ensure proper execution of the work.
262
15.2
Batching Devices
All batching of materials should be by weight. Weighing equipment shall
be of such design and construction that the materials for each batch can
be quickly and accurately weighed . A weighing accuracy of a 1 percent
may be considered satisfactory. The equipment shall conform to the
requirement laid down in IS 2722-1964 Specifications for portable swing
weight Batchers for concrete (Single and Double bucket type). It shall be
so constructed that the operator can readily shovel out the excess material
in over charged hoppers and the material released all at one time when
the hoppers are discharged.
15.3
Mixer
Concrete mixer of adequate capacity shall be provided and it shall be of
the non tilting type, conforming to the requirements of IS 1791
"Specification for Concrete Mixer (First Revision)" and shall have a rated
capacity of not less than 2 cement bags of mixed concrete. The mixer
shall be equipped with an approved water measuring device capable of
accurate measurement of water required per batch, the mixer shall
preferably be equipped with a mechanically operated pump for filling the
mixer tank.
The mixer if specially specified, shall be equipped with an approved timing
device which will automatically lock the discharge level during the full time
to mixing and release it at the end of mixing period, the device shall also
be equipped with a bell or adjusted to ring each time the lock is released.
If the timing device gets broken or out of order, the mixer will be permitted
to be used while the same is being repaired, provided an approved timepiece equipped with minute and second hand, is provided and that each
batch is mixed for one and half minutes .
15.4
Water supply Equipment

The water supply equipment shall be of such capacity and nature as to
ensure at all time ample supply and adequate pressure for all the
requirement of sprinkling subgrade, make sub base, mixing and curing of
concrete etc. and all other requirement of the work.
15.5
Sub Grade Template or Strike Board

The subgrade template or strike board shall be of a rigid construction
approximately 100 mm wide and shall weigh at least 45 kg.
15.6
Hand Tamper
The tamper shall be shaped to the cross profile of the slab and shall weigh
not less than 10 kg/m. It shall be constructed of 75 mm thick timber or of
263
steel channel cross-section, two feet longer than the proposed width
pavement slab and sufficiently strong and rigid to retain its shape under all
working conditions. If it is of timber it shall be fitted with steel plate at
bottom. The tamper shall be provided with handles which are resilient
and sufficiently long to enable tamping operation to be performed by men
in standing position.
15.7
Screed Board Concrete Vibrator

Screed board vibrator used for compaction and finishing of concrete shall
comprise of a wooden or mild steel screed with suitable handles. The
screed shall be driven by vibrating device mounted thereon either
electrically or by compressed air or by Petrol engine and propelled or
made to travel on sideforms, shall conform to IS: 2506 Specification for
Screed Board Concrete Vibrators.
15.8
Immersion Vibrator
Immersion vibrator shall comprise of a vibrating head with suitable motive
power either of compressed air, electrical or of a Petrol driven engine, rigid
enough to ensure proper control, and manipulation in the mass of
concrete. It shall conform to IS: 2505 Specification for concrete vibrators,
immersed type (First Revision). They shall be employed to ensure
compaction of concrete along the forms and to avoid any tendency in
honey combing at the edges of the slab. In case of road slab exceeding
125 mm thickness, they shall be used at suitable spacing for compacting
the concrete over the entire width of the slabs in addition to screed board
vibrator.
15.9
Longitudinal Float
The longitudinal float shall not be less than 3.75m in length, 150 mm wide
and shall be properly stiffened to prevent flexing and warping.
15.10 Bridges
The bridges shall be so designed that when placed straddling the forms,
no parts shall come in contact with the pavement. They shall be
sufficiently rigid.
15.11 Long Handled wooden float
The blade of the float shall be at least 1500 mm long and 150 mm wide.
Minimum of two floats shall be provided.
15.12 Belts
The belts of canvas shall not be less than 150 mm wide and shall be at
least 600 mm longer than width of the slab. A minimum of two belts shall
be provided.
15.13 Push Brooms
The push brooms shall not be less than 450 mm width and be made from
good quality base fibre. The handle shall be least 300 mm longer than
half the width of the slab. Minimum of four push brooms shall be provided.
264
15.14 Straight edge

The straight edge shall remain true and rigid under working conditions and
shall be swing from suitable handles. The size shall be 3.0 m
15.15 Edging tool
The edging tool shall have a radius of 6 mm . The vertical limb shall
extend to the required depth. A minimum two edging tools shall be
provided.
15.16 Master straight edge
The master straight edge shall be of known accuracy so that it may be
used for checking other straight edges. It shall be made of steel or other
suitable materials of sufficient length, and of sufficient rigidity to maintain
its accuracy.
15.17 Other small tools
Other small tools and equipment such as spades, shovel, iron pans, water
pots, rods etc. necessary to complete the work in accordance with the
intent and meaning of above Specification shall also be provided.
265
5(E) PROTECTION WORKS GEOSYNTHETICS

SR. NO.
&
CODE
NO.
103
RD
73

In Rs. )
Providing dry rubble stone pitching 23 cm

(about 9" ) thick including all material, quarry
spalls, labour etc. complete.
( lead to be considered seperately )
Completed
Labour
Sqm.
157.00
85.00
Spec. No. : Rd. 73 P. No. 246

104
RD
73

Spec. No. : Rd. 73 P. No.246
Sqm.
177.00
88.00
105
RD
73

Spec. No. : Rd. 73 P. No.246
Sqm.
240.00
106.00
106
RD
74
Providing dry trap / granite / quartzite/ gneiss

rubble stone masonry including all material,
quarry spalls, labour etc. complete.
Cum.
414.00
134.00
1948.00
544.00
Spec. No. : Rd. 74 P. No.247

107 Providing and Constructing gabion structure of
MORTH required section made up of soft mechanically
2500 woven hexagonal shaped G.I. wire confirming to
BS:443 having zinc plus PVC coating of overall
diameter of 3.70 mm having mesh of size 10 x
12 cm or less with edge wire confirming to
BS:443 of overall diameter 4.4 mm edges being
mechanically selvedge including placing in
position, filling neatly with rubble all loose ends
to be securely tied etc. complete. (Size 1M x 1M
x 1M)
266
No.
SR. NO.
&
CODE
NO.

In Rs. )

x 2M)
Completed
Labour
No.
3431.00
950.00
No.
5180.00
1566.00

x 3M)
267
5(F) ROAD FURNITURE

SR. NO.
&
CODE
NO.
110
RD
78
Providing and fixing R.C.C. 1:2:4 boundary stone

of size (15 X 15 X 90 cm ) including cost of
reinforcement @ 100 kg / Cum as per type design
including painting, numbering, fixing in standard
size (45 X 45 X 75 cm ) C.C. 1:4:8 block etc
complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
No.
750.00
156.00
No.
305.00
110.00
No.
3161.00
781.00
No.
1700.00
470.00
Spec. No. : As directed by Engineer - in - charge.
111
RD
78 A
Providing and fixing R.C.C. 1:2:4 200 m. stone of

size (15 X 10 X 65 cm ) as per I.R.C. design (IRC
26-1967) including cost of reinforcement @ 100 kg
/ cum), painting, numbering, fixing in standard size
(35 X 30 X 40 cm ) C.C. 1:4:8 block etc complete.
112
RD
78 A
Providing R.C.C. 1:2:4 5'th Km. Stone on S.H .

and M.D.R. etc. including cost of reinforcement @
100 kg / cum), painting, numbering etc. complete
as per IRC design (IRC 8-1980) for highway 5th
km. Stones and fixing in standard size (55 X 80 X
60 cm ) C.C. 1:4:8 block etc complete.
113
RD
80
Providing R.C.C 1:2:4 ordinary km. Stones

including cost of reinforcement @ 100 kg / cum)
painting numbering etc. complete for S.H. way and
M.D.R. as per IRC design (IRC 8-1980) for
highway km stone and fixing in standard size (63 X
63 X 60 cm ) C.C. 1:4:8 block etc complete.
268
SR. NO.
&
CODE
NO.
114
RD
81
Providing R.C.C. 1:2:4 ordinary km. stones, for

ODR and V.R. including cost of reinforcement @
100 kg / cum) painting numbering etc. complete as
per I.R.C. design (IRC 8-1980) for highway
km.stone and fixing in standard size (67 X 50 X 60
cm ) C.C. 1:4:8 block etc complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
No.
1395.00
390.00
No.
1657.00
805.00
115
Providing and fixing R.C.C. precast cement

concrete M-15 pedestal OF SIZE 0.75 X 0.75 X
0.20 m including cost of steel reinforcement
for Km.stone as per detailed drawing and
specification including transportation of pedestal
Block , all lifts etc. complete.
269
SR. NO.
&
CODE
NO.
116
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Retro-Reflectorised Traffic Signs

Providing and fixing of retro- reflectorised
cautionary, mandatory and informatory sign as
per IRC: 67 made of high intensity grade
sheeting vide clause 801.3 / High intensity
Prismatic grade sheeting as per ASTM D 4956 ,
fixed over aluminium sheeting, 2.00 mm thick,
duly painted on back side with two coats of
grey stove enamel paint & supported on a mild
steel angle iron post 75 mm x 75 mm x 6 mm, 3.5
mt long firmly fixed to the ground by means of
properly designed foundation with M15 grade
cement concrete 45 cm x 45 cm x 60 cm, 55 cm
below ground level as per approved drawing. The
angle iron post shall be duly painted with one coat
of epoxy primer and two coats of epoxy finish
paints having alternate black and white bands of 25
cm width including GI fixures and transportation etc
complete.The nut bolts of board with angle iron
post/supporting structure after fixing at site has to
be electrically welded.Retroreflective sheeting
should be with seven years written warrenty from
the
manufacture
&
authorised
distributer/convertor,for
satisfactory
field
performance,
durability
&
stipulated
retroreflectance of retroreflective sheeting.This
certificate in original should be submitted to the
Engineer in charge
by the contractor/supplier.
i) 90 cm equilateral triangle
Each
3960.00
165.00
ii) 60 cm equilateral triangle
Each
iii) 60 cm Circular
Each
2783.00
3564.00
165.00
165.00
iv) 80 cm x 60 cm rectangular
Each
4774.00
165.00
v) 60 cm x 45 cm rectangular
Each
3487.00
165.00
vi) 60 cm x 60 cm square
Each
4037.00
165.00
vii) 90 cm high octagon
Each
5951.00
165.00
Spec. No. : M.O.R.T & H 2013 Clause No 801 P.No.

325
270
SR. NO.
&
CODE
NO.
117
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
8063.00
153.00
Direction and Place Indentification

Signs upto 0.9 sqm Size Board.
Providing and erecting direction and place
identification retro-reflectorised sign as per
IRC:67 made of high intensity grade sheeting
vide clause 801.3 / High intensity Prismatic grade
sheeting as per ASTM D 4956, fixed over
aluminium sheeting, 2 mm thick with area not
exceeding 0.9 sqm,duly painted on back side with
two coats of grey stove enamel paint & supported
on a mild steel single angle iron post 75 x 75 x 6
mm, 3.5 m long firmly fixed to the ground by
means of properly designed foundation with M15
grade cement concrete 45 x 45 x 60 cm, 55 cm
below ground level as per approved drawing.The
angle iron post shall be duly painted with one coat
of epoxy primer and two coats of epoxy finish
paints having alternate black and white bands of 25
cm width including GI fixures and transportation etc
should be with seven years written warrenty from
the
manufacture
&
authorised
distributer/convertor,for satisfactory field
performance, durability & stipulated
retroreflectance of retroreflective sheeting.This

certificate in original should be submitted to the
Engineer in charge by the contractor/supplier.
Spec. No. :M.O.R.T & H 2013 Clause No 801
P.No. 325
271
Sqm.
SR. NO.
&
CODE
NO.
118
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
9295.00
305.00
Direction and Place Indentification

Signs with size more than 0.9 sqm size board
Providing and erecting direction and place
identification retro- reflectorised sign as per IRC
:67 made of High intensity grade sheeting vide
clause 801.3/ High intensity Prismatic grade
sheeting as per ASTM D 4956, fixed over
aluminium sheeting, 2 mm thick with area
exceeding 0.9 sqm,duly painted on back side with
two coats of grey stove enamel paint & supported
on a mild steel angle iron post 75 mm x 75 mm x 6
mm,3.5 m long, 2 Nos.properly cross braced with
angle iron of size 50x50x5 mm, firmly fixed to the
ground by means of properly designed foundation
with M 15 grade cement concrete 45 cm x 45 cm x
60 cm, 55 cm below ground level as per approved
drawing including M.S. angle iron frame for board
of size 35x35x3 mm. The angle iron post including
bracing shall be duly painted with one coat of
epoxy primer and two coats of epoxy finish paints
having alternate black and white bands of 25 cm
width including GI fixures and transportation etc
be electrically welded.
Retroreflective sheeting should be with seven

years written warrenty from the manufacture &
authorised distributor/convertor,for satisfactory field
performance,durability & stipulated retroreflectance
of retroreflective sheeting.This certificate in original
should be submitted to the Engineer in charge by
the contractor/supplier.
272
Sqm.
SR. NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
119
Labour
Overhead Signs
Providing and erecting overhead signs with a
corrosion resistant 2 mm thick aluminum alloy
sheet reflectorised with high intensity retroreflective sheeting vide clause 801.3/ High
intensity Prismatic grade sheeting as per ASTM D
4956, with vertical and lateral clearance given in
clause 802.2 and 802.3 duly painted on back side
with two coats of grey stove enamel paint and
installed as per clause 802.7 over a designed
support system of structural steel work trestles
and trusses of sections and type as per structural
design requirements and approved plans, including
painting with one coat of epoxy primer & two coats
of epoxy finish paint. The nut bolts of board with
angle iron post/supporting structure after fixing at
site has to be electrically welded.Retroreflective
sheeting should be with seven years written
warrenty from the manufacture & authorised
distributer/convertor,for
satisfactory
field
performance,durability & stipulated retroreflectance
of retroreflective sheeting.This certificate in original
should be submitted to the Engineer in charge by
the contractor/supplier.
M.T. 67980.00
a) Truss and Vertical Support
Sqm.
b) Aluminium Alloy Plate for Over Head sign
Spec. No. :M.O.R.T & H 2013 Clause No 802
P.No. 335
273
6160.00
2135.00
73.00
SR. NO.
&
CODE
NO.
120
RSC-3
Providing and fixing informatory sign boards in

square or rectangular shape of any size made out
16 guage (1.6 mm) thick mild steel sheet painted
with one coat of zinc chromate-stoveing primer and
two coats green stove enamel paint on front side
and grey stove enamel on back side and border /
message / symbols etc. with cut out of white
retroreflective sheeting of engineering grade,
including M.S. angle frame of 35 mm x 35 mm x 3
mm and two M.S. angle iron post of size 65 mm x
65 mm x 6mm, 3.65 m long properly cross braced
with angle iron of size 50 mm x 50 mm x 5 mm duly
painted with alternate black and white bands of 25
cm width including G.I. fixtures etc. and fixing the
board in 1:4:8 concrete block of size 60 cm x 60
cm x 75 cm including transportation etc. complete.
The nut bolts of board with angle iron
should be with five years written warrenty from the
manufacture & authorised distributor/convertor,for
satisfactory field retroreflectance of retroreflective
sheeting.
performance,durability & stipulated This certificate

in original should be submitted to the Engineer in
charge by the contractor/supplier.
Spec. No. : As per IRC-67, 2012 & M.O.R.T & H
Circular No. RW/NH-33023/31/88 D.O.III Dated 2-51994
274
UNIT
Sq.m.
RATE FOR 2014-15

( In Rs. )
Completed
Labour
7018.00
1830.00
SR. NO.
&
CODE
NO.
121
RSE-1
Supplying rolled steel channel post of 100 x 50 mm

(ISMC) drilled on top and painted with one coat of
epoxy primer and two coats of epoxy finish paint
having black and white bands of 25 cm last part of
the post 0.75 m below ground level is painted with
three coats of red lead paint with 2 nos. of high
tensile G.I. bolt and nut of size 10 mm Dia. of 25
mm long including transportation etc. complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Rmt.
693.00
143.00
Rmt.
501.00
128.00
Rmt.
363.00
78.00

122
RSE-2
Supplying M.S. Angle iron post of size 65 mm x

65 mm x 6 mm drilled on top and painted with one
coat of epoxy primer and two coats of epoxy finish
paint having black and white bands of 25 cm, last
part of the post 0.75 m below ground level is
painted with three coats of red lead paint with 2
nos. of high tensile G.I. bolt and nut of size 10 mm
dia. of 25 mm long including transportation etc.
complete.
123
RSE-3

65 mm x 6 mm duly painted with one coat of red
oxide paint and two coats of synthetic enamel finish
paint having black and white bands of 25 cm width
including 2 nos of G.I. bolt and nut of size 10 mm
dia. And 20 mm long including transportation etc.
complete.
275
SR. NO.
&
CODE
NO.
124
RSE-4

50 mm x 5 mm duly painted with one coat of red
oxide paint and two coats of synthetic enamel finish
paint having black and white bands of 25 cm width
including 2 nos of G.I. bolt and nut of size 10 mm
dia. And 20 mm long including transportation etc.
complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Rmt.
308.00
78.00
Rmt.
185.00
78.00
Rmt.
175.00
78.00

125
RSE-5
Supplying M.S. Angle iron frame for informatory

sign boards of size 35 mm x 35 mm x 3 mm
welded and painted with one coat of epoxy primer
and two coats epoxy finish paint etc. complete.
126
RSE-6
Supplying M.S. Angle iron frame for informatory

sign boards of size 35 mm x 35 mm x 3 mm
welded and painted with one coat of stoving primer
and two coats stove enamel paint etc. complete.
276
SR. NO.
&
CODE
NO.
127
RSE-7
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
A)Providing and fixing aluminium casted CAT

EYE STUD of size 10 cm x 10 cm at base with
M.S. Zinc coated nails of size 12 mm dia. of 12 cm
long having both sides (Dual Direction) high impact
ABC 3 Nos. of eyes of 16 mm dia. on both sides
containing 7 beads each i.e. 42 beads in
retroreflective etc. complete.
Each
385.00
67.00
B)Providing and fixing raised Pavement Marker

with epoxy adhesive conforming to ASTM D 4280
type H, electrically welded Microprismatic lenses
6000 nos. per sq. inch having reflectivity 279, 167,
and 69 for white, yellow & red respectively at 0
entrance & 20 degree observation angle
etc.complete.
Each
220.00
18.00
Each
1166.00
598.00
Sq.m.
450.00
13.00
No.
12.00
2.00

128
RSE-9
Fixing sign board in cement concrete 1:4:8 block of

size 0.60 m x 0.60 m x 0.75 m including excavation
curing transportation of all materials, all lifts etc.
complete.
129
Providing and laying of hot applied thermoplastic

compound 2.5 mm thick including reflectorising
glass beads @ 250 gms per sqm area, thickness
of 2.5 mm is exclusive of surface applied glass
beads as per IRC:35 .The finished surface to be
level, uniform and free from streaks and holes etc
complete.
Spec. No. :M.O.R.T. & H. 2001,
Clause No. 803 P. No. 320
130
RD 83
Painting letters upto 20 cm. height including

cleaning the surface & painting etc. complete.
Spec. No. :As directed by Engineer-in-charge.
277
SR. NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
131
RD 85
Painting and numbering trees with white back

ground and black lettering etc complete. (23 x
23cm)
No.
19.00
14.00
132
RD
93 A
Painting with approved enamel paint in two coats

including cleaning surface and lettering for
CAUTIONARY / MANDATORY SIGN BOARDS
etc complete.
No.
74.00
33.00
No.
88.00
49.00
No.
12.00
8.00
133
RD
93 B
Painting INFORMATORY SIGN BOARDS/

VILLAGE NAME BOARDS with approved enamel
paint in two coats and lettering including cleaning
surface etc. complete.
134
RD
93 C
Painting Nallah flow direction, span no. and

location on masonry work with approved enamel
paint in two coats including background painting
and lettering including cleaning surface etc.
complete.
278
SR. NO.
&
CODE
NO.
135
RD
93 D
Painting 5th K.M. stone with approved enamel

paint in two coats complete and lettering including
cleaning surface etc.complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
No.
91.00
56.00
No.
75.00
49.00
No.
30.00
14.00
No.
7.00
4.00
112.00
118.00
34.00
34.00
136
RD
93 E
Painting Ordinary K.M. stone with approved

enamel paint in two coats complete and lettering
including cleaning surface etc. complete.
137
RD
93 F
Painting Two Hundred Metre Stone with

approved enamel paint in two coats complete and
lettering including cleaning surface etc. complete.
138
RD
93 G
Painting Boundary Stones with approved enamel

paint in two coats complete and lettering including
cleaning surface etc. complete.
139
Providing line, dashes, arrows etc. on roads in

two coats with ready mixed road marking paint
including cleaning the surface of all dirt. dust &
other foreign matter demarkation at site and traffic
control etc. complete.
a) over 10 cm. in width (white and yellow)
b) upto 10 cm. in width
279
Sq.m.
Sq.m.
SR. NO.
&
CODE
NO.
140
RD
94
Providing white and colour washing to road side

trees in 2 coats in 2 bands of white and one red
band at centre of 30cm. height each including
preparing the surface, cost of material, conveying
etc. complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
No.
28.00
21.00
Sq.m.
12.00
7.00
1144.00
354.00

141
RD
94
Dressing of side shoulder by mechanical means

including excavation of cutting shrubs and bushes
spreading the excavated stuff & sectioning to the
required line, level and slope etc. complete.

142
Breaking and removing by mechanical means Cu.m.

the existing cement concrete pavement to full
width & depth including lean concrete, cutting
dowel bars breaking the removed C.C.slab pieces
in to 50 to 75mm size, disposing the dismantalled
material upto a lead of 50 m etc. complete
143
Dismantalling of flexible pavements & disposal

of dismantalled material upto a lead of 50
meter,stacking serviceable & unserviceable
materials seperately including compaction of same
with power roller etc. complete.
(A) By Manual means
i) Bituminous course
ii) Granular course
Cu.m.
Cu.m.
567.00
354.00
567.00
354.00
(B) By Mechanical means

i) Bituminous course
Cu.m.
140.00
140.00
Spec. No. : M.O.R.T.& H 2001 Clause No 202, P.

No. 44
280
SR. NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
144
Refixing the disturbed guard stone in position

and in line with necessary excavation fixing in 1:4:8
c.c. block of size 45 x 45 x 45 cm, ramming etc.
complete.
No.
229.00
54.00
145
Providing and laying shoulder drain of trap

rubble of 0.45 x 0.45 meter section at 450 angle to
the road edge including hand packing, filling voids
with sand/shingle of approved quality and ramming
etc. complete as desired.
Rmt.
197.00
126.00
Sq.m.
781.00
18.00

146
Providing and painting with REFLIT RETRO

REFLECTIVE PAINT of approved make on New
concrete / plastered or any other surfaces after
applying two coats of white base coat over road
furniture like Kilometer stones, Guard stones, road
dividers, kerb stones, Parapet walls, Pipe/ concrete
railings, concrete sign boards, Delinators, & also
over Electric poles, road side trees, fire hydrants,
Crash barriers, Road machineries lying on road
sides or any other temporary road marking for
delination purpose etc complete ( Including cost of
labour, material, transportation and all taxes etc
complete.)
281
SR. NO.
&
CODE
NO.
147
UNIT
Providing and painting with REFLIT RETRO Sq.m.

REFLECTIVE PAINT of approved make on old
concrete / plastered or any other surfaces after
applying two coats of white base coat over road
furniture like Kilometer stones, Guard stones, road
dividers, kerb stones, Parapet walls, Pipe/ concrete
railings, concrete sign boards, Delinators, & also
over Electric poles, road side trees, fire hydrants,
Crash barriers, Road machineries lying on road
sides or any other temporary road marking for
delination purpose etc complete ( Including cost
of labour, material, transportation and all taxes etc
complete.)
RATE FOR 2014-15

( In Rs. )
Completed
Labour
721.00
18.00
2698.00
207.00

148
Providing and fixing single sided "W" beam

metalic anti crash barrier as per IRC-5 & MORTH
specifications fixed on M.S. Post 'C' type channel
of size 150 x 75 x 5 mm. 1.90 mtr. Long with "W"
beam confirming IS:5386 grade Fe 410 of size 311
x 82.5 x 3 mm. including zinc coating to channel
post, "W" beam and all nut bolts and fixing the post
in 350 x 350 x 1140 mm. CC M-15 block at 2.00 m.
centre to centre of channel post including providing
and fixing of suitable reflective (luminous) diveces
on the traffic face of the barrier at intervals to
ensure adequate visibility during night and foggy
conditions etc. complete.
Spec.No.: MORTH CL.No. 810 and IRC-5 Clause

No. 115-4.
Metal Beam Crash Barrier
282
Rmt.
SR. NO.
&
CODE
NO.
149
Providing and erecting "W" metal beam crash

barrier comprising of 3 mm thick corrugated sheet
metal beam rail, 70 cm above road/ground level,
fixed on ISMC channel vertical post of size 150 x
75 x 5 mm spaced 2 m centre to centre, 1.8m in
height and 1.10m below ground/road level, all steel
parts and fitments to be galvanised by hot dip
process, all fittings to conform to IS:1367 and
IS:1364, metal beam rail to be channel section 150
x 75 x 5mm, 330mm long including fixing in
cement concrete block of M-15 grade of size
400mm x 400mm x 800mm at lower portion and
of size 600mm x 600mm x 300mm at upper
portion projecting 100mm above GL etc.
complete as per M.O.R.T. & H. clause 810 etc.
complete.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Rmt
3117.00
100.00
Rmt
4556.00
143.00
Type - A, "W" : Metal Beam Crash Barrier

Spec. No. :M.O.R.T.& H. 2001 Clause No 810 P.
No. 330
150
Providing and erecting "Thrie" metal beam

crash barrier comprising of 3 mm thick corrugated
sheet metal beam rail, 85 cm above road/ground
level, fixed on ISMC channel vertical post of size
150 x 75 x 5 mm spaced 2 m centre to centre, 2.00
m in height and 1.15 m below ground level, all steel
parts and fitments to be galvanised by hot dip
process, all fittings to conform to IS:1367 and
IS:1364, metal beam rail to be fixed on the vertical
post with a space of channel section 150 x 75 x 5
mm, 546 mm long complete as per M.O.R.T.& H.
clause 810 etc. complete.
Type - B, "THRIE" : Metal Beam Crash Barrier

No. 330
283
SR. NO.
&
CODE
NO.
151
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
Provision of an Reinforced cement concrete

crash barrier at the edges of the road,
approaches to bridge structures and medians,
constructed with required grade concrete with
HYSD reinforcement conforming to IRC:21 and
dowel bars 25 mm dia, 450 mm long at expansion
joints filled with pre-moulded asphalt filler board,
keyed to the structure on which it is built and
installed as per design given in the enclosure to
MOST circular No. RW/NH - 33022/1/94-DO III
dated 24 June 1994 as per dimensions in the
approved drawing and at locations directed by the
Engineer, all as specified etc. complete.
a)
R.C.C. M-20 Grade
Rmt
5931.00
214.00
b)
R.C.C. M-25 Grade
Rmt
6047.00
214.00
c)
R.C.C. M-30 Grade
Rmt
6186.00
214.00
Rmt.
1793.00
324.00

No. 329
152
Flexible Crash Barrier, Wire Rope Safety Barrier
MORTH (Providing and erecting a wire rope safety barrier
810
with vertical posts of medium weight RS Joist
(ISMB series) 100 mm x 75 mm (11.50 Kg/m), 1.50
m long 0.85 m above ground and 0.65 m below
ground level, split at the bottom for better grip,
embedded in M-15 grade cement concrete 450 x
450 x 450 mm, 1.50 m center to center and with 4
horizontal steel wire rope 40 mm dia and anchored
at terminal posts 15 m apart. Terminal post to be
embedded in M-15 grade cement concrete
foundation 2400 x 450 x 900 mm (depth)
strengthened by a strut of RS Joist 100 x 75 mm, 2
m long at 450 inclination and a tie 100x 8 mm,
1.50 m long at the bottom, all embedded in
foundation concrete as per approved design and
drawing, rate excluding excavation and cement
cocrete.)
284
SR. NO.
&
CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs. )
Completed
Labour
153
Supplying precast conventional reflective delinators
MORTH on four sides for road signs
806
No
280.00
57.00
154
Providing and fixing including conveyance charges
MORTH upto a distance of 200 Km. precast concrete post
806
delinators, post of size 130 x 90 x 1300 mm
consisting of 4 B.T. wires with 14,000 Kg/cm2 C.C.
M-20 grade 16mm dia. hold fast, including
excavation & C.C. 1:4:8 foundation block, oil
painting post with 3 coats and Red fluorescent tape
75 x 75mm and white floursent border 20mm wide
around the red tape on all the four sides with
necessary adhesive and laminations etc. complete
No
375.00
92.00
1.00
0.25
6450.00
1056.00

155
Providing and fixing reflective fluorescent tape on
MORTH old road sign including cleaning / scraping the
existing board complete.
Sq.m.
156
Providing and fixing with apex point upward
MORTH prepared on fibre reinforced plate 3.0 milimeter
801
thick bonded with white retroreflective sheeting on
Engineering grade having pressure sensitive / heat
activated adhesive retrorflective white back ground
and red border and back side gray retoreflective
symbols, letters, numerals, arrows, one M.S. angle
post of 65 x 65 x 6 mm size and 3.65 meter long
inflated bottom and drilled on top and painting
posts with white and black border of 25
centimetres, fitting board to post with 2 numbers of
strong G.I. bolts and nuts including transportation
and fixing in p.c.c. 1:4:8 etc. complete. (The work
to be executed with prior approval of
Superintending Engineer)
No.
i) Cautionary sign boards 90 cm equilateral triangle

Spec. No. :MORTH 801 IRC 57 of 2001
285
SURVEY WORK
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
2533.00
Reconnaissance survey for road work including

study of survey sheet , maps etc. alignment
including 3 dimension of apexes, fixing pegs,
chain & compass or cross staff survey
necessary level if required, fixing apex stones
of size 0.15 x 0.15 x 0.60 meter in cc 1:2:4 at
every apex points and all types of compliances,
if required from the department.
Per Km
4356.00
Procurement of Village map / Forest map/ Land

plan from Forest / Revenue authority for
preparation of land plan record etc. completed
including necessary payment for the plans and
other documents as necessary for this survey
and plotting and demarcation works etc.
complete.
Per No
357.00
Survey for Preparation of land plans and fixing

boundaries of road using pegs including
carrying out detailed plain table survey / chain
and compass survey of the area on the both
sides of center line of the road up to 100 m or
Per Km
3220.00
Carrying out plotting works of the area surveyed

by the surveyors on AutoCAD / tracing sheet. -------------- ----------------------------------
Per Km
708.00
Preparation of land plans Tracing on AUTO

CAD / tracing film of approved marks 60/65
micron one side matt and taking out prints and
binding the same etc. ----------------------------------------------------------------------------------
Per Km
293.00
286
2029.00
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Providing 10 Ammonia copies/ Computer prints

of each sheet of land plan of size 60 cm x 40
cm including preparing road wise sets in plastic
cover with printing the required information on
the cover etc. complete.
Labour
Per Km
220.00
Preliminary survey of road alignment including

fixing three dimensions of apexes, verification
of type of land, chain and compass survey,
fixing reference pegs wherever necessary
including collection of other essential data with
the help of theodolite levels where ever
necessary etc, complete in plain area.
As directed by Engineer in charge.
[As per "Guidelines for preparation of Road
Project" by P.W.D.]
/ Km
3264.00
2698.00
Detailed survey of road alignment with chain

and compass, levels by Auto level and other
essential instruments including setting of final
centre line, locating curves, establishing B.M.,
fixing of apex stone of size 0.15m x 0.15m x
0.60m in CC 1:2:4 wherever necessary and
taking L-section, cross section, fly leveling trial
pits (0.60m x 0.60m x 0.60m) at 200 mtr.
interval etc, complete in plain area.
Project" by P.W.D.]
/ Km
6439.00
5196.00
Preparing and providing detailed plans and

estimates of road including typing in 5 copies in
proper file including colouring ammonia prints of
plans, indexing and paging etc. complete and
all type of compliance, if required from
department, including L/S and C/S at every
30mtr. intervals and quantity calculation.
Project" by P.W.D.]
Taking output for 2 km.
Per Km
1415.00
287
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
10
Survey of catchment area of stream up to 100

Acres by visual inspection by use of chain and
compass etc. complete (Approximate 100 Acres
area as per village map)
Per No
348.00
164.00
11
Preparing and providing detailed estimates of

C.D.works in 5 copies in proper file including
taking L - section of road preparing catchment
area plan by traverse method and taking one
trial pit of size 1.50m x 1.50m x 1.5m and all
types of compliance, if required from
department.
Project" by P.W.D.]
Taking output 3 No.
Per No
1320.00
799.00
12
Carrying out detailed survey for Raised

causeway including reconnaissance taking Lsection of existing road necessary cross
sections one at defined, one at vergin one at
alternate proposed site and L/Section of stream
up to sufficient length with chain and compass,
taking two trial pits of size 2.00 x 2.00 x 3.00 M
collecting of samples from T.P. for ascertaining
the silt factor preparation of details survey data
and submission of the project in 5 copies with
colouring of the ammonia prints/ computer print
site plan and other drawing etc. complete and
all necessary compliance, if required from
department.
Project" by P.W.D.]
Each
24916.00
21163.00
288
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
13
Preparing and submitting detailed plans and

estimate of Raise causeway in 5 copies based
on detailed survey data approved by competent
authority with ammonia prints, of site plan and
other drawing, colouring of plans, proper filling,
indexing and paging etc. complete and all types
of compliance, if required from department.
Project" by P.W.D.]
14 Carrying out details survey of Minor Bridge

including Reconnaissance taking L - section of
existing road and necessary cross section, one
at U/S, and one at D/S, one vergin cross
section. one cross section at alternate proposed
site and L - section of stream up to sufficient
length with chain and compass, taking three
trial pits of size 2.00 x 2.00 x 3.00 M.collecting
samples of bed materials from trial pit for
ascertaining the silt factor, submission of survey
data in three computerized copies and
colouring of the prints, site plans and other
drawing etc, completed. As directed by
Engineer in charge.
Project" by P.W.D.]
Considering ( Working in 5 days )
289
Each
Labour
2645.00
Each 31963.00
27436.00
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
15
Preparation of detailed drawing / plans and

estimate of Minor Bridge based on approved
detailed survey data by the competent authority
including 5 copies of ammonia prints/ computer
print site plan other drawings with colouring of
plans, proper filling , indexing and paging etc.
complete and all types of compliance, if
required from department.
Project" by P.W.D.]
/ Each
Labour
2990.00
Carrying out detailed survey for major bridge

including Reconnaissance taking L-section of
existing road, necessary cross sections, One at
U/s and one at D/s, one end C/s at U/s (500m)
& one end C/s at D/s (500m), one vergin cross
section and one cross section as alternate
proposed site and L/Section of stream up to
sufficient lengths including chain and compass,
taking five trial pits three in bed, two on banks
of size 2.00 x 2.00 x 3.00m for collecting
samples from trial pit for ascertaining the silt
factor, from Government approved laboratories
(testing charges to be borne by agency.) and
preparation of detailed survey data, submission
of the project fully typed, colouring of the
ammonia prints, site plan and other drawing
etc. complete and all types of compliance, if
required from department. (Excluding taking
trial bores and contouring)
Project" by P.W.D.] -
16
A) 0.00 up to 150.oo mtr. [Bed Width]
Each 57244.00
42240.00
B) above 150 mtr
Each 62968.00
46530.00
290
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
17
Preparing and submitting detailed plans and

Each or No.
estimate of major bridge in 5 copies based on
detailed survey data and technical note
approved from the competent authority
including ammonia / computer prints, of site
plan, and other drawing with colouring of plans,
proper filling, indexing and paging etc. complete
and all types of compliance, if required from
department.
Project" by P.W.D.]
18
Taking trial bores for detailed investigation with

NX diamond drill double tube in all sorts of soil
like soft murum, hard murum and boulders
including all materials such as casing pipes,
accessories, grease, steel boolsam and other
such materials and or as required including
conveying such materials and machinery to site
of works, preserving the loose samples in glass
plastic jar and core samples serially numbered
at site of work and conveying the same to the
head quarter of concerned office as directed
and submission of detailed bore log sheet
completed.
Project" by P.W.D.]
A) Over Burden (all sorts of soil like soft
murum, hard murum and boulders)
4431.00
i) Over Burden (all sorts of soil like soft murum,

hard murum and boulders)
/ Rmt
2192.00
ii) for Trial Bores Drilling In Standing Water
/ Rmt
2600.00
291
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
19
Taking trial bores for detailed investigation with

NX diamond drill double tube in all sorts of soil
in soft rock / weathered rock including all
materials such as casing pipes, accessories,
grease, steel boolsam and other such materials
and or as required including conveying such
materials and machinery to site of works,
preserving the loose samples in glass plastic jar
and core samples serially numbered at site of
work and conveying the same to the head
quarter of concerned office as directed and
submission of detailed bore log sheet,
completed.(Excluding Core box)
B) soft rock / weathered rock
Project" by P.W.D.]
i) soft rock / weathered rock
/ Rmt
ii)for Trial Bores Drilling In Standing Water

20
2588.00
2996.00
Taking trial bores for detailed investigation in

rock other than quartzite with NX diamond drill
double tube boring including all materials such
as casing pipes, accessories, grease, steel
boolsam and other such materials and or as
required including conveying such materials
and machinery to site of works and core
samples serially numbered at site of work and
conveying the same to the head quarter of
concerned office as directed and submission of
detailed bore log sheet, completed. (Excluding
core box.)
Rock other than quartzite. [As directed by
Engineer in charge.]
Project" by P.W.D.]
( for 2.5 mt. Output )
i)Hard Rock other than quartzite.
292
/ Rmt
3857.00
4850.00
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
21
22

quartzite rock with NX diamond drill double tube
boring including all materials such as casing
pipes, accessories, grease, steel boolsam and
other such materials as required including
conveying such materials and machinery to site
of works, core samples serially numbered on
site of work and conveying the same to the
head quarter of concerned office as directed
and submission of detailed bore log sheet,
completed. As directed by Engineer in charge.
( Excluding core box.) --------------------
i) BY NX Drill
/ Rmt
7340.00
/ Rmt
9429.00
/ Rmt
6341.00

quartzite rock with BX diamond drill double
tube boring including all materials such as
casing pipes, accessories, grease, steel
boolsam and other such materials as required
including conveying such materials and
machinery to site of works, core samples
serially numbered on site of work and
detailed bore log sheet, completed. As directed
by Engineer in charge.
( Excluding core box.)
1) BY BX Drill
Project" by P.W.D.]
293
7740.00
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
23
Labour

quartzite rock with AX diamond drill double
tube boring including all materials such as
casing pipes, accessories, grease, steel
boolsam and other such materials as required
including conveying such materials and
machinery to site of works, core samples
serially numbered on site of work and
detailed bore log sheet, completed. As directed
by Engineer in charge.
(Excluding core box.)
1) BY AX Drill
Project" by P.W.D.]
( Rate for 2 Rmt. Output )
/ Rmt
5448.00
/ Rmt
6435.00
Per No
2253.00
24
Providing core box of Non Teak wood / jungle

wood of size 1.5 m. x 0.35 m. x 0.10 m. for
preserving core sample with all fixtures &
fastening, painting, handles, locking
arrangement including material and labour etc.
complete
Rate for 1 Box.
25
Preparing and providing contour survey map of

river / stream on U/S and D/S. of proposed
bridge site including chain and compass survey
and taking levels survey at every (15M x 15M)
Preparing contour map and supplying ammonia
prints in 5 sets etc. complete.
Project" by P.W.D.]
294
/Sq.Km. 23138.00
13179.00
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
26
Preparing land, plans and land schedule

including carrying out plain table survey for
private / forest land on both side of road in
Rural and Urban areas. The work of plotting
and, certificate from D.I.L.R. or other authorities
shall be obtained for corrections of prepared
plans, tracing and taking out prints and
preparing the requisite booklets duly bounds
and printing with all materials etc.Three land
plans booklets along with original tracing shall
be supplied along with of village maps / forest
land plans from concerned authorities.
Note : The item includes following points. (1)
Carring out plain table survey of the
private/forest land, along the road upto required
width On either side from the road centre. (2)
Plotting of duly surveyed area. (3) Collection of
data from D.I.L.R. Authorities and verification of
survey maps of D.I.L.R. Authorities. (4)
Preparing three booklets of survey maps,
including taking out prints of survey maps,
binding etc.
/ Sq.Km 20120.00

Project" by P.W.D.]
27
Providing and carrying out "Traffic Census" for

7 days on N.H. / S.H. / M.D.R. by employing a
team of skilled person for counting each type of
vehicle running on the highways, recording
their numbers as per method suggested by
Engineer-in -charge / IRC, calculating traffic
intensity/P.C.U. including labour, materials
stationary and rental charges of tables, chairs,
red flags, etc. complete and giving final report
of traffic.
As directed by Engineer in charge. -[As per IRC
Guideline]
(A) Count post having traffic intensity upto
10,000 M.T./Day
Consider output 7 days
295
Per Day
4111.00
Labour
11460.00
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
28

Engineer-in -charge, calculating traffic
of traffic.As directed by Engineer in charge. [As per IRC
Guideline]
Count post having traffic intensity above 10,
000 MT/DAY AND upto 20,000 M.T./Day
Per Day
6009.00
29

Engineer-in -charge, calculating traffic
of traffic.
As directed by Engineer in charge. [As per IRC
Guideline]
(C) Count post having traffic intensity more than
20,000 M.T./Day
/ Per Day
7809.00
296
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
30
a)
Updating of following maps

Updation of Nagpur District map in Marathi
under Road Development Plan 1981-2001 and
making new C.D. .
( Coloured Map )
b)
No.
2420.00
Updation of Nagpur District map in English

under Road Development Plan 1981-2001 and
making new C.D. .
( Coloured Map )
No.
2420.00
c)
Updation of 13 taluka maps of Nagpur District

map in Marathi under Road Development Plan
1981-2001 and making new C.D.
No.
1452.00
d)
Updation of 13 taluka maps of Nagpur District

map in English under Road Development Plan
1981-2001 and making new C.D. . ( Coloured
Map )
No.
1452.00
e)
Taking B./W tracing print of District map in

English and Marathi on double matt tracing film.
No.
847.00
f)
Taking B./W tracing print of taluka map of

Nagpur District on double matt tracing film.
No.
726.00
g)
Final colour prints of District map on white

paper after making correction in Drawings.
No.
424.00
h)
Final colour prints of taluka map on white paper

after making correction in Drawings.
No.
424.00
i)
Trial plot on fit to scale of District map making

corrections on white paper.
No.
121.00
j)
Trial plot on fit to scale of taluka map making

corrections on white paper.
No.
121.00
297
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
31
32
Carrying of detailed topographic survey by

using Total station along the proposed road
alignment including taking L - Section and cross
section at every 30 meter upto ROW, taking at
least 10 spot level per cross section, picking up
all existing detail inside the ROW like electric
telephone lines, encroachments, structure etc.
connecting all the primary total station control
points by G.T.S. Bench marks level or
whichever available with department using auto
level and preparing Auto CAD plan by using
(xyz) co-ordinate using above data taking out
one set of black & white printout on 50 micron
polyester film sheet A1 size and two sets of
coloured printouts on which sheet A1 size
submitting soft copy of all data on C.D.
Project" by P.W.D.]
a) By Total Station
Per Km 22425.00
b) By Auto Level
Per Km 16819.00
Carrying of detailed topographic survey for road

work by using Total station along the proposed
road alignment including taking L - Section and
cross section at every 10 meter upto ROW,
taking at least 10 spot level per cross section,
picking up all existing detail inside the ROW like
electric telophone lines, encroachments,
structure etc. connecting all the primary total
station control points, available with department
using auto level and preparing Auto CAD plan
one set of black & white printout on 50 micron
polyester filmsheet A1 size and two sets of
coloured printouts on which sheet A1 size
submitting soft copy of all data on C.D. ( Not
Including Preparation of L/s & Computation of
Quantities by C/s )
By Partly using Departmental Staff & Jeep
Per Km 11247.00
298
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
33
Carry of Detailed topographic survey by using

Total station, picking up all land boundary
points, existing building, road, electric &
telephone poles, trees, encroachments,
structure detailed etc. connecting all the primary
total station control points, grid contour at every
10 meter both way and preparing AutoCAD
Plan with contour at 1.00 meter interval in
necessary scale, area statement of land and
existing building, taking out three set of black &
white printout & one set on tracing film in
necessary size and submitting soft copy of all
data on C. D. and as per instructions given by
engineerin- charge
34
Carry of Detailed topographic survey by using

Total station, picking up all land boundary
points, existing building, road, electric &
telephone poles, trees, encroachments,
structure detailed etc. connecting all the primary
total station control points, grid contour at every
10 meter both way and preparing AutoCAD
Plan with contour at 1.00 meter interval in
necessary scale, area statement of land and
existing building, taking out three set of black &
white printout & one set on tracing film in
necessary size and submitting soft copy of all
data on C. D. and as per instructions given by
engineerin- charge
( Mode of Measurement = Area including actual
plot area with building , Main & side road in
Sqm)
By Partly using Departmental Staff
299
sqm
2.00
Per Sqm
1.50
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
35
Preparation of roadway drawing (plan & profile)

using available user data computer in Auto Cad
at required scale specified in / as per IRC and
submitting on C.D. including template,
necessary project details on each drawing
Assuming daily output 1.00 Km.
Project" by P.W.D.]
Per km
2244.00
36
Preparation of roadway drawing ( profile/ Lsection) using available user data computer in
Auto Cad at required scale spacified in / as per
IRC and submitting on C.D. including template,
necessary project details on each drawing
by partly using departmental Staff
Per km
1196.00
37
Geometrical design of roads for horizontal and

vertical curves at designed speed specified by
I.R.C. with proposed grades as per I.R.C.
standard in detail along the proposed alignment
including taking trial curves, super elevation
design including submitting initial proposed
grades & curve designs and finally approved
designs with all data on 3 C.D. & 3 hard copies
etc. complete.
Assuming daily output 1.00 Km.
Project" by P.W.D.]
No
3457.00
38
Computation of quantities of earthwork

pavement and other road elements as per the
approved grade & curves for four lane estimate
excluding bridges / C.D. works including rate
analysis for lead charges and preparation of
final abstract and detailed estimate.
Assuming daily output of 1.00 Km.
Project" by P.W.D.]
Km
4867.00
300
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
39
Computation of quantities of earthwork

pavement and other road elements as per the
approved grade & curves for two lane
excluding bridges / C.D. works including
preparation of final abstract .
By Partly using Departmental Staff
Km
3152.00
40
Preparation of final design and feasibility report

including specification writing for all
construction items and executive summary
stating scope of work, rates adopted, key points
of execution salient feature of the project etc.
complete and submitting in 3 hard copies and
C.D, etc. complete, Time required and
expenses incurred for every 5 Km.
Project" by P.W.D.]
Km
3991.00
41
Taking purely fly levels to carry G.T.S. Bench

mark as and where required and as directed
etc. complete.
Rate for 5 Km.
Project" by P.W.D.]
Km
398.00
301
Labour
133.00
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
42
Providing and carrying out O & D Survey for 7

days on predefined count posts for up and
down traffic on N. H. / S. H. / M. D. R. etc. The
survey shall be conducted round the clock in
three shifts at predefined count posts as
instructed by Engineer In charge, The O & D
survey shall be made to intercept all vehicles
passing through these check post. The
procedure and necessary formats of O & D
survey shall be got approved from competent
authority before starting the actual work.
The survey shall include tracing
the movements of all vehicles ( except two
wheelers) its origin (Place and distance) and
destination points (Place and dist. factory etc.)
types of vehicle (LCV, Trucks trailer, Tanker,
Buses, Minibuses), types of commodity being
carried out, approximate weight of vehicles,
total distance to be travelled by vehicles.
Vehicles carring container, gas cylinder, flat etc.
shall also be included in survey. For all vehicles
loaded and empty mode shall also be recorded
under each commodity. Hourly vehicle count
shall also be segregated if required to find pick
hour traffic.
The survey shall be carried out by
employing team of skilled and experianced
supervisor and persons for counting and
carrying out OD survey. Necessary slips shall
be issued to vehicals to enumarate the vehicale
if required as directed by engineer incharge.
The survey data shall be submitted
in the presentable form in soft copy as well as
hard copy with binding wigh all statistical
calculations, as per requirement of engineer
incharge. The survey shall be carried out as per
relevent latest applicable IRC. The work is
inclusive of all labour materials, stationary,
rentalcharges, departmental charges, typing
printing, binding other expencess and taxes etc
complete.
Consider 7 Days output
302
per Day
10980.00
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Labour
Per Sqm
2.00
2.00
Per Km
3042.00
43
Cleaning the site removing bushes, including

removal of roots upto 20cm. Circumference and
disposal of above stuffs upto a lead of 10mtr. or
as directed by Egnineer-In-Charge.
44
Preparation of road way drawing ( Plan &

Profile ) on computersing Auto cad at required
scale showing all topo feature and proposed
construction details such as carriage way
median service road, toe lines, retaining walls,
cross drainage works, major structures
including indexing level table, legend basic
information of project and design detail.s etc.
complete
45
Carrying out deatailed survey and design of

junction with total station indicating length
proposed to be improved traffic is land of
perticular size and shape of road. Layout of
traffic sign information board, breaks in median
verge as per IRC standards etc. complete and
based upon it the junction improvement drawing
to be prepared as per the standard plate of
MOSRT & H and supplying nine copies with
providing or details along with C D works etc.
complete.
No
3300.00
46
Carrying out Tree Census of all trees within

proposed right of way including calssication per
girth and type of spices and listing out trees to
cut / shifted for proposed alignment.
Per Km
2184.00
47
Carrying out listing of permanent and temporary

structure within proposed right of way including
type and age of structure list of persons
affected by projects and details of area to be
acquired structure wise with approximate
valuation etc. complete.
Km
3300.00
303
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
VIDEO PHOTOGRAPHY
1 Preparing and carrying out vido shooting of
One Hour
road, bridges, other structures and programme,
Compact
including preliminarys survey, still shots, moving
Disc
shooting, necessary board for video shooting
hiring of vehicle, equipents for video shooting
tranportation of all equipments, persons,
requried for shooting, lighting arrangement as
may be necessary, editing, mixing, titiling,
lettering, sonding including cost of coloured
casset of approved quality etc. complete.
i) Rate cassette/ hour
Spec. No. :- As directed by Engineer- in charge.
550.00
Preparing and carrying out vido shooting of

road, bridges, building, other programme
including hiring of vehicle equipments for video
shooting, tilting,lighening, mixing,lettering
editing including cost of two colour cassetts of
approved make and quality etc. complete.
Spec. No. :- As directed by Engineer- in charge.
A) within 50 kms.
I) Work up to 5 Hours
Per day
Per day
2200.00
1100.00
B) beyound 50 Km.
i) Work up to 5 Hours
Per day
Per day
2400.00
1200.00
304
Labour
SR.NO.
& CODE
NO.
UNIT
RATE FOR 2014-15

( In Rs.)
Completed
Shooting of still photographs outdoor and

indoor of construction and other works of
building, bridges, roads etc. in Nagpur and
outside Nagpur distt. at any distances.
Spec. no.:- As directed by Engineer-incharge.
ii) 4"x6" Size

iii) 5"x 7" Size
Extra copies- 4"x6"Size
Extra copies- 5"x7"Size
Each set
Each set
Each
Each
Carrying out 24 hours continuous video

shooting for traffic count at proposed toll plaza
or other required location excluding junction,
covering traffic from all lanes and in both
directions with submission of auto generated
vehicle category wise report by Count from
Video using image processing software and
report in prescribed format including audit of
entire video and report , submission of
annotated
video
and
time
stamped
categorywise thumbnail view of each vehicle on
USB ( 3 copies), traffic analysis , graphical
presentation as directed by Engineer-in-Charge
with accuracy more than 95% including remarks
compliance and preserving copy of annotated
video and submitted report (backup) for any
future requirement etc. complete.
Per day 74800.00

two
direction
305
88.00
143.00
10.00
17.00
Labour
MATERIAL RATES
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
TRAP HEADER (17X22X60 TO 75 CM) APP. 60 CM LONG
No.
33.00
TRAP HEADER APP. 75 CM LONG
No.
35.00
RUBBLE STONE (BLASTED)
Cu.m.
210.00
SAND (SCREENED)
Cu.m.
450.00
CEMENT
Bags
290.00
M. S. BARS OF V/S SIZES
M. T.
44300.00
BINDING WIRES
Kg.
68.00
NAILS
Kg.
68.00
10
HIGH TENSILE (TOR) STEEL
M. T.
Deleted
10
10a TMT STEEL
M.T.
46000.00
11
15
RUBBLE AT QUARRY ( MASONRY)
Cu.m.
240.00
12
18
GRAVEL AT NALLA BED
Cu.m.
130.00
13
19
FIRE WOOD
Quintal
310.00
14
20
BITUMEN BULK VG 40 (30/40) AT MUMBAI w.e.f. 01/06/2014
M. T.
57580.00
15
20a BITUMEN PACK TIN VG 40 (30/40) AT MUMBAI w.e.f.

21 01/06/2014
BITUMEN BULK VG30 ( 60/70) AT MUMBAI w.e.f. 01/06/2014
M. T.
61570.00
M. T.
53925.00
21a BITUMEN PACK TIN VG30 ( 60/70) AT MUMBAI

21b w.e.f.01/06/2014
BITUMEN BULK VG10 (80/100) AT MUMBAI w.e.f. 01/06/2014
M. T.
57915.00
M. T.
52895.00
16
17
18
19
22
SOLVANT (LDO)
Ltr.
62.00
20
27
GUARD STONE (STD. SIZE) (Stone)
No.
Deleted
21
28
BOUNDARY STONE (Stone)
No.
Deleted
22
30
PIN HEADER ( STD. SIZE) (Stone)
No.
42.00
23
31
QUARRY SPALLS ( TRAP RUBBLE)
Cu.m.
170.00
24
32
TR. HEADER / THROUGH ST. (Stone)
No.
Deleted
25
33
TR. HEADER (Stone)
No.
Deleted
26
34
TRAP METAL BLASTED 60 mm.
Cu.m.
Deleted
27
35
TRAP METAL 60 mm. (UNBLASTED)
Cu.m.
Deleted
28
36
TRAP METAL 50 MM. (BLASTED)
Cu.m.
295.00
29
37
TRAP METAL 50 MM. (UNBLASTED)
Cu.m.
320.00
30
38
TRAP METAL 40 MM. (BLASTED)
Cu.m.
305.00
31
39
TRAP METAL 40 MM. (UNBLASTED)
Cu.m.
320.00
32
40
TRAP METAL 40 MM. (CRUSHED)
Cu.m.
650.00
33
41
Cu.m.
700.00
34
42
Cu.m.
750.00
35
43
TRAP METAL 10 MM. / 12 MM (CRUSHED)
Cu.m.
460.00
36
44
HARD MURUM
Cu.m.
225.00
306
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
37
45
SOFT MURUM
Cu.m.
200.00
38
46
Cu.m.
450.00
39
905 Stone Dust
200.00
40
49
BRICKS AGGREGATE ( 20 TO 40 MM)
Cu. M.
Cu.m.
41
53
STEEL FOR STRUCTURAL WORK
M. T.
47500.00
42
54
STEEL PLATES
M. T.
52000.00
43
54a SAND UNSCREEN FOR BUILDING
Cu.m.
400.00
44
55
SAND UNSCREEN FOR ROAD (Nallah Bed)
Cu.m.
225.00
45
56
LIME SLAKED ( FINE LIME)
Kg.
12.00
46
61
BRICK BATS
Cu.m.
600.00
47
79
BRICKS ( II CLASS)
No.
4.50
48
80
BRICKS ( I CLASS)
No.
Deleted
49
80a FLY ASH BRICKS
No.
4.00
50
82
FIRE BRICKS
No.
20.00
51
86
KHANDKIES
No.
Deleted
52
92
CORNER STONES 38X20X30 CM.
No.
65.00
53
93
POLI. SHAHABAD (M. CUT 25 MM TH.)
Sq. m.
Deleted
54
95
ROUGH SHAHABAD (12-20 MM TH.)
Sq. m.
180.00
55
97
WATER PROOFING COMPOUND
Kg.
90.00
56
98
POLISH SHAHA. FOR STEPS (25 MM.)
Sq. m.
Deleted
57
99
CHEQ. CEMENT TILES
Sq. m.
200.00
58
100 TANDUR POLISHED FOR STEPS
Sq. m.
Deleted
59
101 NEERU.
Kg.
Deleted
60
103 KOTA STONE ( MACHINE CUT) 25MM.TH
Sq. m.
425.00
61
104 ROUGH SHAHABAD ( 25 TO 30 MM. TH)
Sq. m.
Deleted
62
Sq. m.
Deleted
63
Sq. m.
Deleted
64
108 TANDOOR ( HAND CUT) 25 MM. TH
Sq. m.
Deleted
65
109 TANDOOR 25 MM. TH. (MACHINE CUT)
Sq. m.
Deleted
66
110 PLAIN CEMENT TILES
Sq. m.
180.00
67
111 CEMENT COLOUR TILES
Sq. m.
185.00
68
112 WHITE GLAZED TILES 15X15 CM.
Doz.
Deleted
69
113 WHITE GLAZED TILES 10X10 CM.
Doz.
Deleted
70
114 WHITE MAKRANA MARBLE SLAB (12mm TO 15mm )
Sq. m.
1600.00
71
114a WHITE MARBLE (12mm TO 15mm ) (Other than Makrana)
Sq. m.
1200.00
72
115 MARBLE CHIPS
Kg.
Deleted
73
116 MARBLE COLOUR POWDER
Kg.
Deleted
307
315.00
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
Per 50
Kg.
Bag
Kg.
750.00
74
117 WHITE CEMENT
75
118 COLOURED CEMENT
76
119 MARBLE MOSAIC CHEQ. TILES(GREY)
Sq. m.
250.00
77
122
Sq. m.
375.00
78
124 COL. MOZAIC TILES ( GREY CEMENT)
Sq. m.
Deleted
79
125 MARBLE MOSAIC TILES ( GREY CEMENT)
Sq. m.
Deleted
80
127 KOTA STONE STEP (POLISHED)
Sq. m.
475.00
81
129 COL. MOZAIC TILES ( WHITE CEMENT)
Sq. m.
Deleted
82
131 CHEQUERED TILES (GRAY CEMENT)
Sq. m.
170.00
83
138 LINSEED OIL DOUBLE BOILED
Ltr.
100.00
84
139 TURPENTINE
Ltr.
70.00
85
141 FRENCH POLISH
Ltr.
170.00
86
142 VARNISH
Ltr.
150.00
87
143 COAL TAR
Kg.
55.00
88
144 COMERCIAL SPIRIT
Ltr.
55.00
89
145 WHITE ZINC PAINT
Kg.
180.00
90
150 ALUMINIUM PAINT
Ltr.
250.00
91
151 SYNTHETIC PAINT
Ltr.
250.00
92
152 ENAMEL PAINT / FLAT PAINT
Ltr.
250.00
93
154 RED OXIDE PAINT
Kg.
140.00
94
155 PLASTIC EMULSION PAINT
Kg.
280.00
95
158 COLOUR POWDER (YELLOW EARTH)
Kg.
10.00
96
159 WASHABLE DISTEMPER
Kg.
85.00
97
160 OIL BOUND DISTEMPER
Kg.
100.00
98
163 WATER PROOF CEMENT PAINT
Kg.
50.00
99
164 T. W. PLANKS 1.2 M. LENGTH
Cu. M.
75000.00
100
175 T. W. PLANKS ABOVE 2.5 M. LENGTH
Cu. M.
77000.00
101
177 T.W. PLANK 25 TO 50 MM TH. 10-15 CM Wide
Cu. M.
77000.00
102
178 T.W. GIRDER (JOIST)
Cu. M.
78000.00
103
180 T.W. PLANKS 20 MM. TH (10-15 CM Wide)
Cu. M.
75000.00
104
Cu. M.
56000.00
105
180a Teak Wood Battens

183 T.W.BULLIES 100 MM DIA
Rmt.
150.00
106
184 T.W. BULLIES 125 MM DIA.
Rmt.
160.00
107
185 T.W. BULLIES 150 MM DIA.
Rmt.
175.00
108
186 JUNGLE WOOD PLANKS & IN GENERAL
Cu. M.
30000.00
109
190 G.I. SCREW BOLTS
No.
3.00
110
191 G.I. 'J' HOOKS 6 MM. DIA.
No.
6.50
KADAPPA ( MACH CUT) 25 MM TH.
308
100.00
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
111
192 G.I. WASHERS
No.
0.75
112
193 MANGLORE TILES CLASS ''A''
No.
10.00
113
196 J.W.BALLIES 150 MM. DIA
Rmt.
70.00
114
197 MANGLORE RIDGE/HIP TILES
No.
20.00
115
199 G.C.I. SHEETS (CORRUGATED ) 20 BWG.
M. T.
66000.00
116
199a G.I.SHEET COLOUR
M. T.
68000.00
117
200 G.I. WASHERS
Kg.
90.00
118
201 G.I.NUT AND BOLTS
Kg.
95.00
119
206 STRONG IRON BOLTS 10 MM. DIA.
Kg.
100.00
120
208 RIDGE CAP (PLAIN G.I.)
M. T.
66000.00
121
210 BITUMINOUS WASHERS
Kg.
100.00
122
211 A.C. SHEET RIDGE
Pair.
270.00
123
211a Googly Bolt With Bitumenous Washer
Kg.
80.00
124
213 MANGLORE GLASS TILE
No.
350.00
125
215 A.C. PLAIN SHEET 6 MM. TH.
Sq. m.
Deleted
126
218 A.C.CORRUGATED SHEET 6 MM. TH.
Sq. m.
Deleted
127
222 PLAIN A.C. SHEET 4 MM. TH.
Sq. m.
Deleted
128
223 HARD BOARD 6 MM. TH.
Sq. m.
155.00
129
224 PLY WOOD 12 MM. TH. Commertial
Sq. m.
400.00
130
225 PLY WOOD 6 MM. TH. Commertial
Sq. m.
305.00
131
225a PLY WOOD 4 MM. TH. Commertial
Sq. m.
170.00
132
226 PARTICAL BOARD (12 MM.TH.)
Sq. m.
385.00
133
226a Marine Ply 12 mm
Sq. m.
600.00
134 226b Marine Ply 6 mm
Sq. m.
430.00
135
226c Marine Ply 4 mm
Sq. m.
275.00
136
227 INDIAN SUPERIOR T. W. FRAME
Cum
89000.00
137
228 IRON HOLD FAST 300X40X5MM
No.
45.00
138
229 BUTT HINGES ALUMINIUM 75 MM
No.
55.00
139
No.
60.00
140
No.
65.00
141
232 TOWER BOLT ALUMINIUM 150 MM
No.
50.00
142
No.
60.00
143
No.
70.00
144
235 HANDLE ALUMINIUM 125 MM.
No.
50.00
145
236 HANDLE AND EYES ALUMN. 225 MM
No.
30.00
146
239 GLASS 5.5 MM. THICK (PLAIN)
Sq. m.
500.00
147
241 HANDLE IRON OXI. 100 MM.
No.
30.00
309
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
148
242 TOWER BOLT 150 MM. IRON
No.
30.00
149
243 HOOK & EYE IRON OXI. 75 MM
No.
18.00
150
245 HANDLE IRON OXI. 125 MM
No.
35.00
151
246 HOOKS AND EYES 225 MM IRON OXI
No.
20.00
152
247 MORTICE LOCK SUPERIOR
No.
725.00
153
248 SLIDING DOOR BOLT (TADI)
No.
65.00
154
249 ALDROP ALUMINIUM 300 X 16 MM
No.
180.00
155
250 BUTT HINGES IRON OXI. 125 MM
No.
35.00
156
251 BUTT HINGES IRON OXI.100 MM
No.
30.00
157
252 BUTT HINGES IRON OXI. 90 MM
No.
22.00
158
253 ALDROP IRON OXI. 300 MM (20 MM DIA.)
No.
120.00
159
254 IR. OXI. TOWER BOLT 150 MM.
No.
65.00
160
255 TOWER BOLT IRON OXI. 250 MM.
No.
80.00
161
256 TOWER BOLT IRON OXI.200 MM
No.
70.00
162
257 LATCH 250 MM LONG IRON OXI.
No.
45.00
163
258 BLACK HINGES
No.
12.00
164
259 STR. BUTT HINGE BR.OXI 150 MM.
No.
75.00
165
260 STR. STRAP HINGE BR.OXI 200 MM.
No.
85.00
166
261 STR. BUTT HINGE BR.OXI 100 MM.
No.
65.00
167
262 TOWER BOLT IRON OXI.300 MM
No.
95.00
168
263 CHAIN AND STARLE IRON
No.
35.00
169
264 BR.OXI, TOWER BOLT 250 MM.
No.
185.00
170
265 IRON OXI. STRAP HINGE
No.
30.00
171
266 B.R. ORNAMENTAL HANDLE
No.
185.00
172
269 HANDLE FOR STEEL WINDOWS
No.
32.00
173
272 SOLID CORE T.W. VENEER 35 MM
Sq. m.
1350.00
174
273 BRASS DOUBLE ACTING SPRING HINGES
No.
170.00
175
274 SOLID CORE (COMME)SHUTTER 35 MM
Sq. m.
1100.00
176
276 X.P.M. 12 MM X 18 GAUGE
Sq. m.
130.00
177
277 HANDLE IRON OXI.150 MM
No.
40.00
178
278 STOPPER FOR STEEL WINDOW
No.
35.00
179
279 FLY PROOF G.I. WIRE MESH
Sq. m.
185.00
180
288 HAMP ROPE
Kg.
80.00
181
292 FERRUL FOR C.I. PIPE 100 MM
No.
140.00
182
293 COUPLING C.I.80 MM.
No.
130.00
183
294 COUPLING CAST IRON 100 MM
No.
135.00
184
296 BELL MOUTH COVER (100 MM) DIA
No.
65.00
310
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
185
304 CLAMP FOR G.I. PIPE
No.
8.50
186
310 C.I.COVER 45X30 CM. WITH FRAME
No.
Deleted
187
319 BIB STOP TAP BR. HEAVY 15 MM.
No.
185.00
188
No.
275.00
189
No.
325.00
190
322 SOCKET FOR 15 MM. TAP
No.
15.00
191
No.
21.00
192
No.
26.00
193
326 WHEEL STOP TAP OF BRASS 15 MM
No.
225.00
194
No.
310.00
195
No.
480.00
196
331 GUN M. STOP TAP & CR. WH. 20 MM
No.
220.00
197
332 GUN M. STOP TAP & CR.WH 25 MM
No.
260.00
198
334 SHOWER ROSE CHR PLATED BR 10 CM
No.
240.00
199
340 BALLCOCK 15 MM. DIA. P.V.C. FLOAT
No.
160.00
200
341 BALLCOCK 25 MM. DIA. P.V.C. FLOAT
No.
265.00
201
348 W.C. PANS 63 CM. Indian Closet WITH TRAP
No.
585.00
202
349 10 LTR. FLU. TANK WITH ACCESSORIES (CI)
No.
Deleted
203
350 FOOT REST CHEQUERED 25 X 10 CM
Pair.
120.00
204
352 W.C. PAN 63 CM. IST CL(ORISA)
No.
950.00
205
No.
1000.00
206
353 W.C. PAN 63 CM (ORRISA TYPE) CM. IST CLASS WITH

354 TRAP
HALF STALL TYPE URINAL
No.
1750.00
207
356 LIPPED TYPE URINAL
No.
550.00
208
357 HALF ROUND E.W. PIPE 100 MM.
Rmt.
45.00
209
358 WASH BASIN (45X30 CM COL. GLAZE)
No.
700.00
210
359 W/GLAZED E.W.SINK 0.600.2X0.45 with acc.
No.
1650.00
211
360 15 MM DIA CRO.PLATED BIB COCK
No.
190.00
212
362 WHITE GLAZED W.H. BASIN 0.45X0X0.3X0.2
No.
600.00
213
366 A.C.RAIN WATER PIPE 75 MM. DIA
Rmt.
65.00
214
367 BIB TAP 15 MM BRASS MEDIUM
No.
135.00
215
368 BIB TAP 15 MM CAST IRON
No.
Deleted
216
369 C.I. COWL/VENT 75 MM. DIA
No.
245.00
217
No.
275.00
218
No.
350.00
219
372 C.I.COLLER 75 MM. DIA
No.
200.00
220
373 C.I.COLLER 100 MM.DIA
No.
220.00
221
374 C.I.COLLER 150 MM. DIA
No.
300.00
311
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
222
375 G.I.PIPE 15 MM. DIA MEDIUM TYPE
Rmt.
140.00
223
376 G.I.PIPE 20 MM. DIA MEDIUM
Rmt.
165.00
224
Rmt.
205.00
225
Rmt.
255.00
226
Rmt.
300.00
227
Rmt.
410.00
228
Rmt.
500.00
229
Rmt.
640.00
230
Rmt.
900.00
231
384 EUROPEAN TYPE W.C. PAN 68 C.M. (WHITE)
No.
1250.00
232
393 C.I.GRATING 75 MM. DIA
No.
45.00
233
394 C.I.GRATING 100 MM. DIA
No.
50.00
234
395 A.C. PIPE 100 MM. DIA
Rmt.
60.00
235
396 A.C. PIPE 75 MM.DIA. SHOE
No.
50.00
236
397 SALT GLAZED S.W. GULLY TRAP
No.
120.00
237
398 STONE WARE PIPE 100 MM. DIA
Rmt.
90.00
238
407 U.P.V.C.PIPE 15 MM. DIA.10kGF/Cm2 PRESSURE
Rmt.
50.00
239
Rmt.
60.00
240
Rmt.
70.00
241
Rmt.
90.00
242
Rmt.
110.00
243
Rmt.
125.00
244
Rmt.
155.00
245 413B U.P.V.C.PIPE 75 MM. DIA.10kGF/Cm2 PRESSURE
Rmt.
225.00
246 413C U.P.V.C.PIPE 90 MM. DIA.10kGF/Cm2 PRESSURE
Rmt.
280.00
247
414 COLOUR EUROPEAN TYPE W.C. PAN
No.
1300.00
248
415 COLOUR WASH H.BASIN 45 CM X 30 CM
No.
850.00
249
420 GUN. M. STOP COCKS 15 MM CL. WHEEL
No.
175.00
250
422 BRASS WHEEL STOP TAP 32 MM. DIA
No.
490.00
251
424 BRASS WHEEL STOP TAP40 MM. DIA
No.
520.00
252
No.
1020.00
253
No.
1375.00
254
No.
2400.00
255
432 GUN METAL STOPCOCK C. WHEEL 20 MM
No.
385.00
256
No.
510.00
257
No.
630.00
258
442 WH. GL. FULL STALL URINAL
No.
3300.00
312
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
259
446 WH. GL. WASH BASIN 63 X 45 CM.
No.
925.00
260
447 COL. GL. WASH BASIN 63 X 45 CM.
No.
1320.00
261
456 C.I.Y. JUNCTION 75 MM DIA
No.
260.00
262
No.
330.00
263
No.
415.00
264
459 A. C. COLLER
No.
26.00
265
460 C.I. PLUG BENT 150 MM DIA
No.
950.00
266
461 A.C. DOUBLE 'Y' JUNCTION 100 MM
No.
88.00
267
No.
115.00
268
No.
75.00
269
464 A.C. PIPE 150 MM DIA.
Rmt.
80.00
270
465 A. C. PLUG BEND 150 MM DIA.
No.
85.00
271
466 STONE WARE PIPE 150 MM DIA.
Rmt.
145.00
272
467 STONE WARE PIPE 225 MM DIA.
Rmt.
190.00
273
591 COL. GLAZED TILES 15 X 15 CM.
Doz.
165.00
274
597 ALLUMINIUM ROD 25 MM DIA.
Rmt.
50.00
275
598 VENEER 4 MM THICK T.W.
Sq. M.
410.00
276
602 WIRED GLASS 6 MM THICK
Sq. M.
575.00
277
603 C. I. PIPE 75-80 MM. DIA.
Rmt.
650.00
278
604 C. I. PIPE 100 MM DIA.
Rmt.
790.00
279
605 C. I. PIPE 150 MM DIA.
Rmt.
1200.00
280
622 GULLY TRAP COVER WITH FRAME C.I.
No.
180.00
281
626 A. C. SHOE 100 MM. DIA
No.
60.00
282
628 A. C. COWL. VENT. ( 100 MM DIA.)
No.
55.00
283
630 A. C. BEND 75 MM
No.
50.00
284
631 A. C. BEND 100 MM
No.
53.00
285
632 C. I. BEND 100 MM
No.
300.00
286
No.
160.00
287
635 TOWEL ROD WITH CLAMPS ( 16MM DIA) Cromium Plated

CM 125 MM Cromium Plated
641 60
HINGES
No.
55.00
288
642 TOWER BOLTS 300 MM CR. PLATED (IRON)
No.
70.00
289
643 TOWER BOLTS 200 MM. CR. PLATED (IRON)
No.
55.00
290
644 ALDROP 300 X 16 MM CR. PLATED
No.
160.00
291
645 HANDLE 125 MM CR. PLATED
No.
55.00
292
647 HOOKS AND EYES CR. PLATED
No.
30.00
293
648 BR. OXI. BUTT. HINGES 125 MM
No.
82.00
294
649 BR. OXI. ALDROP 300 X 16 MM.
No.
385.00
295
650 BR. OXI. HANDLES 125 MM
No.
90.00
313
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
296
651 BR. OXIDE TOWER BOLTS 300 MM
No.
220.00
297
652 BR. OXI. TOWER BOLTS 200 MM
No.
165.00
298
653 BR. OXI. HOOKS AND EYES 200 MM
No.
60.00
299
655 BR. OXI. HINGES 100 MM.
No.
75.00
300
656 HINGES IRON 100 MM
No.
30.00
301
659 WELDED MESH 50 X 50 X 2.54 MM (10 GAUGE)
Sq. M.
300.00
302
663 BARBED WIRE
Kg.
70.00
303
664 BAMBOO 50 MM DIA.
Rmt.
30.00
304
665 COIR STRING
Kg.
50.00
305
666 BAMBOO 25 MM DIA.
Rmt.
20.00
306
708 RED POWDER / GERU
Kg.
12.00
307
719 NON TEAK / JUNGLE WOOD
Cu. M.
29000.00
308
721 CHICKEN PROOF JALI
Sq. M.
40.00
309
755 CEMENT BASE PUTTY
Kg.
50.00
310
801 T. W. PARTICLE BOARD, BOTH FACE LAMINATED 12MM
Sq. M.
700.00
311
837 A. C. COWL. DOME 3" (75 MM) DIA.
No.
35.00
312
838 A. C. COWL. DOME 4" (100 MM) DIA.
No.
45.00
SYMET BATH FITTINGS.

313
839 WASTE COUPLING 31/32 MM (H/T/F/T)
No.
65.00
314
840 GRATING DOOM 100 MM
No.
40.00
315
841 GRATING DOOM 125 MM
No.
42.00
316
842 GRATING DOOM WASTE HOLE 125 MM
No.
40.00
317
843 GRATING ROUND 140 MM
No.
60.00
318
844 GRATING SQUARE 150 MM
No.
115.00
319
845 GRATING SQUARE WASTE HOLE 150 MM
No.
115.00
320
846 GRATING SQUARE FITTINGS 100 MM
No.
95.00
321
847 GRATING SQUARE 150 MM
No.
Deleted
322
848 BIBCOCK STANDARD 15 MM.
No.
125.00
323
849 BIBCOCK FANCY WITH FLANGE 15 MM
No.
185.00
324
850 BIBCOCK LONG BODY WITH FLANGE 15 MM
No.
220.00
325
851 FLANGE 15 MM
No.
20.00
326
852 EXTNSION NIPPLE 15 MM
No.
30.00
327
853 PILLAR COCK 15 MM
No.
265.00
328
854 PUSHCOCK ( 20 MM FEMALE THREADS) 15 MM.
No.
160.00
329
855 PUSHCOCK (-DO-) WITH NIPPLE 15 MM
No.
140.00
330
856 PUSHCOCK ( 15 MM FEMALE THREADS) 10 MM
No.
100.00
331
857 STOPCOCK (15 MM MALE / FEMALE) 15 MM.
No.
140.00
314
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
332
858 STOPCOCK (FEMALE THREAD) 20 MM.
No.
145.00
333
859 PRESSURE FLUSH COCK ( HEAVY)
No.
440.00
334
860 ANGLE STOP COCK WITH FLANGE 15 MM
No.
175.00
335
861 CONCEALED STOPCOCK 15 MM
No.
260.00
336
862 CONCEALED STOPCOCK 20 MM
No.
285.00
337
863 BALLCOCK COMPLETE WITH EPOXY 15 MM
No.
175.00
338
864 BALLCOCK COMPLETE DO- 20 MM
No.
200.00
339
865 BALLCOCK COMPLETE DO- 25 MM
No.
385.00
340
866 SWIVELLING SHOWER 15 MM
No.
155.00
341
867 SHOWER ARM WITH FLANGE 225 MM
No.
100.00
342
868 URINAL SPREADER 15 MM
No.
130.00
343
869 MORTICE LOCK HANDLE
No.
170.00
344
870 BUTT HINGE (3") 75X60 MM
No.
40.00
345
871 BUTT HINGE (4")100X75 MM
No.
52.00
346
872 REFLEX HINGE L & R (3')75X69 MM
No.
44.00
347
873 TOWER BOLT (4 ") 100 MM
No.
40.00
348
No.
50.00
349
No.
60.00
350
876 UPVC SANITORY GRADE PIPE 75 MM
Rmt.
155.00
351
Rmt.
235.00
352
Rmt.
360.00
Cast Iron Spigot Socket Pipe I.S. 1536 / 1989 Class LA

353
879 80 mm Dia
Rmt.
715.00
354
880 100 mm Dia
Rmt.
900.00
355
881 125 mm Dia
Rmt.
1150.00
356
882 150 mm Dia
Rmt.
1350.00
357
883 200 mm Dia
Rmt.
2200.00
358
884 250 mm Dia
Rmt.
2400.00
359
885 300 mm Dia
Rmt.
3300.00
360
886 CERAMIC TILES 300mm x 300mm

STAINLESS STEEL SINK 600MM X 450MM X 250MM (1 mm
887 Thick ) WITH ACCE.
888 PVC FLUSHING TANK 10 LIT. CAPACITY WITH ACCE.
Sqm
475.00
No.
2000.00
No.
660.00
889 L.D.O
890 Vetrified Tiles 600 mm x 600 mm, 8 mm thick
Litre
75.00
Sqm
890.00
891 Vetrified Tiles 1000 mm x 1000 mm, 10 mm thick

892 Gypsum Board 9 mm Thick
Sqm
1100.00
Sqm
300.00
892a Gypsum Board 12.5 mm Thick
Sqm
310.00
361
362
363
364
365
366
315
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
893 P.O.P. Celling Sheet 12.5 mm Thick

894 Plasticizer
Sqm
160.00
Litre
Deleted
Litre
100.00
No.
40.00
150
No.
45.00
150
No.
55.00
No.
300.00
374
mm Oxidised Parliamentry Hinges size 75mm x

899 Brass
150
900 mm
Brass Oxidised Parliamentry Hinges size 100 mm x 150 mm
No.
320.00
375
901 Brass Oxidised Parliamentry Hinges size 125 mm x 150 mm
No.
350.00
376
902 Glass 3.0 MM. THICK ( plain )
Sqm.
Deleted
367
368
369
370
371
372
373
895 Super Plasticizer

896 Iron Oxidised Parliamentry Hinges size 75 mm x
897 Iron Oxidised Parliamentry Hinges size 100 mm x
898 mm
Iron Oxidised Parliamentry Hinges size 125 mm x
150 mm
902a Glass 4.0 MM. THICK ( plain )
Deleted
902b Glass 5.0 MM. THICK ( plain )
400.00
902c Glass 6.0 MM. THICK ( plain )
495.00
902d Glass 8.0 MM. THICK ( plain )
740.00
902e Glass 10.0 MM. THICK ( plain )
925.00
377
903 Glass 3.0 MM. THICK ( Bajri )
Sqm.
235.00
378
904 Emulsion water based (water proof cement paint)
Litre
165.00
379
906 FLY ASH
M. T.
40.00
380
907 ANGLO INDIAN TYPE W.C.PAN
NO.
1450.00
381
908 WATER JET WITH PIPE FOR W.C. S.S.
NO.
500.00
382
909 BIB COCK SWAN NECK LONG HEADED FOAM FLOW
NO.
650.00
383
910 SUNMICA 0.8MM
Sqm
140.00
384
911 FOURMICA 1MM
Sqm
380.00
385
912 ADDESIVE (FEVICAL)
KG
135.00
386
913 BAISON BOARD 8 MM
Sqm
275.00
913a BAISON BOARD 12 MM
Sqm
400.00
387
914 GRADE-I CRUSHED METAL (45 MM TO 90 MM)
Cu. M.
540.00
388
915 GRADE-II CRUSHED METAL (45 MM TO 63 MM)
Cu. M.
600.00
389
916 GRADE-III CRUSHED METAL (22.5 MM TO 53 MM)
Cu. M.
625.00
Kg.
65.00
No
150.00
Kg
60.00
390
391
50
Steel fibre (M.S. Crimped Flat)

Fuse
392
47
Blasting Powder
393
573 Welding electrode
No
2.45
394
669 Oxi acetylene gas
Cylinder
3000.00
395
162 Zink based oil paint
396
672 Steel pipe for roof 50 mm dia
Liter
Rmt
318.00
158.00
397
Rmt
127.00
316
Sr. Code
No.
Description
Unit
Rate for
2014-15
(Rs.)
398
Rmt
106.00
399
54
Kg.
70.00
400
291 Nut & Bolt 16 mm dia.
Kg
125.00
Sqm
650.00
Gusset plate
401
--
Plywood centering 15 mm thick
402
--
Steel Props (12' Height)
No
1600.00
403
--
Fan hook box
No
200.00
404
--
Melamine based admixture plasticizer
Liter
112.50
405
--
R.C.C. Jali 50 mm thick
Sqm
350.00
406
--
R.C.C. Jali 80 mm thick
Sqm
390.00
407
--
Hallow block
No
70.00
408
--
Polymeric membrane & primer
Kg
365.60
409
Polymer
Kg
355.00
410
--
Glass / Fiber mesh
Sqm
31.50
411
--
Polypropylene fiber
Kg
450.00
412
--
Integral water proofing compound
Liter
225.00
413
--
Non shrink grout
Kg
300.00
414
--
Nozzles for grouting
each
30.00
415
--
Textured paint (Mix putty)
416
--
Water repellant (Perma make or equivalent)
Liter
Liter
1500.00
393.75
Sqm
31.50
417
721 Fiber mesh alkali resistance
418
--
Nail wires etc.
Kg
100.00
419
--
Synthetic tile
Sqm
400.00
420
--
Adhesive (Royal make) 20 Kg
Bag
650.00
421
--
Pigment for tile
Kg
75.00
422
114 White makarana marble 20 mm thick / 15 mm thick
Sqm
3000.00
423
131 Colour chequred cement tile
Sqm
150.00
424
--
Cow dung
Bag
35.00
425
--
Polishing stone
No
100.00
426
--
Bituminous pad 25 mm thick / AC Flexi board
Sqm
325.00
427
202 G.I. Screw 50 mm
Gross
50.00
428
133 Alluminium strip
Kg
260.00
429
575 Bitumen joint filler / A.C. polyseal
Kg
180.00
Lead pipe / plate
Kg
260.00
431
Hollow clay bricks 4"
No
66.00
432
No
89.00
433
No
98.00
430
--
317
8. LABOUR
Sr.
No.
Code
RATES
Description
Unit
Rate For CSR

2014-2015
(Rs.)
BLACK SMITH WITH TOOLSM II CLASS
DAY
283.00
STONE CUTTER WITH TOOLS, SEMI-SKL
DAY
283.00
MASON I ST CLASS SKILLED
DAY
286.00
MASON II ST CLASS SKILLED
DAY
283.00
CARPENTER I ST. CLASS SKILLED
DAY
283.00
CARPENTER II ST. CLASS SKILLED
DAY
283.00
PLUMBER WITH TOOLS, SKILLED.
DAY
283.00
GLAZIER WITH TOOLS SKILLED.
DAY
283.00
TIN SMITH WITH TOOLS, SEMI-SKL.
DAY
283.00
10
10
PAINTER I ST. CLASS, SKILLED.
DAY
286.00
11
11
PAINTER II ST. CLASS, SKILLED.
DAY
283.00
12
12
HEAD FITTER WITH TOOLS SKILLED.
DAY
286.00
13
13
MECHANIC.
DAY
286.00
14
14
LORRY DRIVER / MIXER OPERATOR
DAY
286.00
15
16
WELDER/DRILLER, SKILLED.
DAY
286.00
16
17
POLISHMAN, SEMISKILLED
DAY
283.00
17
18
ASSISTANT PLUMBER, SKILLED
DAY
286.00
18
21
VIBRATOR OPERATOR (SKILLED)
DAY
286.00
19
24
ASPHALT SPRAYER SKILLED.
DAY
286.00
20
26
QUARRY MAN, SEMI SKILLED.
DAY
283.00
21
27
PAINTER (WHITE WASHER),SEMI SKILLED.
DAY
283.00
22
29
TILE TURNER, SEMI SKILLED
DAY
283.00
23
31
BAR BENDER, SKILLED.
DAY
286.00
24
32
BHISTI (MIXING/CURING), SEMI-SKILLED.
DAY
283.00
25
34
TAR HANDLER, SEMI SEMI-SKILLED.
DAY
283.00
26
37
NAVAGHANI
DAY
279.00
27
38
MAZDOOR, UNSKILLED HEAVY
DAY
279.00
28
39
MAZDOOR, UNSKILLED LIGHT./ FEMALE
DAY
279.00
29
41
FITTER I ST. CLASS WITH TOOLS SKILLED.
DAY
286.00
30
42
FITTER II ST. CLASS WITH TOOLS SKILLED.
DAY
283.00
31
55
WELDER
DAY
283.00
32
59
ELECTRICIAN
DAY
283.00
33
62
WATCHMAN
DAY
283.00
34
64
SUPERVISOR
DAY
283.00
318
RATES FOR TRANSPORTATION OF METAL FOR YEAR

2014 - 2015 ( Including Service Tax )
LEAD IN K.M.
RATES FOR 2014-2015

(Rs.)
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
10.5
11
11.5
12
12.5
13
13.5
14
14.5
15
15.5
16
16.5
17
17.5
18
18.5
19
19.5
20
78.00
86.00
94.00
103.00
111.00
119.00
127.00
135.00
144.00
151.00
159.00
166.00
175.00
182.00
190.00
198.00
205.00
213.00
219.00
225.00
232.00
238.00
245.00
251.00
258.00
264.00
271.00
277.00
283.00
290.00
295.00
301.00
306.00
311.00
317.00
322.00
327.00
333.00
338.00
344.00
319
LEAD IN K.M.
RATES FOR 2014-2015

(Rs.)
20.5
21
21.5
22
22.5
23
23.5
24
24.5
25
25.5
26
26.5
27
27.5
28
28.5
29
29.5
30
349.00
354.00
360.00
365.00
370.00
376.00
381.00
386.00
392.00
397.00
402.00
407.00
412.00
417.00
421.00
426.00
431.00
436.00
441.00
446.00
NOTE :-
1. AFTER KM. 30 ADD FOR EACH

SUBSEQUENT KM FROM KM 30/0 to
km. 60/0
Rs. 8.50 Per km/cum
2. ADD FOR EACH SUBSEQUENT KM Rs. 6.70 Per km/cum

FROM KM 60/0 TO KM. 100/0
3. ADD FOR EACH SUBSEQUENT KM
FROM KM 100/0 AND ABOVE
Rs. 6.10 Per km/cum
RATE FOR TRANSPORTATION OF R.C.C. PIPES AND COLLERS.

I] Lead upto 15 km.
Rs. 20.30 per KM / MT
II] Lead from 15 km to 50 km.
III] Beyond 50 km.
Note :-Above Rate of transportation of pipe and collers do not include loading and
unloading charges.
320
RATE FOR TRANSPORTATION OF BITUMEN
Transportation of Max phalt pack tin.

Same as per rates for transportation of
metal for store delivery only. For delivery
of pack tin from refinery.
Transportation of Bulk Bitumen from
refinery.
Heating and unloading bulk
bitumen. Rs. 154.40 per MT
321
10. RATES FOR LOADING , UNLOADING, STACKING AND

TRANSPORTATION OF MATERIALS FOR THE YEAR 2014-2015
Sr.No.
Materials
Unit
Rates for
Loading
carriage of
materials
upto a lead
of 50 Mtrs.
Rates for Rates for Rates for

Unloading Stacking Transportation
including
carriage of
materials
up to a
lead of 50
Mtrs.
Boulders
Rubbles &
Masonry stones
Metal of all
sizes
Cu.M.
(in Rs.)
21.12
(in Rs.)
17.60
(in Rs.)
10.56
Cu.M.
21.12
17.60
10.56
Moorum Sand
Earth & Loose
material
Lime
Cu,.M.
17.60
16.53
7.04
15% Below the rates for

Transportation of metal
Cu.M.
24.64
22.29
8.21

Shahabad/
Sikosa
Sq.M.
1.07
1.07
0.96
1/5 of the the rates for

Fuel Wood
(Babul)
M.T.
19.95
17.60
4.69
1/2 of the rates for

Cement
M.T.
30.61
22.29
14.08
Mild Steel bars

of all sizes.
M.T.
37.65
30.61
18.77

for delivery other than
factory and Railway
station.
2
3
Timber
10
Maxphal Pack
Tin
10-A
Carting of bulk
Bitumen
A) From refinery
10-B
Bituminous &
Metal mix (mix
material)
transportation
10% Extra over the rates

for Transportation of
metal
As per schedule
attached
Cu,M.
22.29
16.43
8.21
M.T.
24.64
22.29
10.56
----
----
----
----
----
----
M.T.
322


Sr.No.
Materials
Unit
Rates for
Loading
carriage of
materials
upto a lead
of 50 Mtrs.
Rates for Rates for Rates for

Unloading Stacking Transportation
including
carriage of
materials
up to a
lead of 50
Mtrs.
(in Rs.)
18.77
(in Rs.)
18.77
(in Rs.)
12.91
11
Bricks
Cu.M.
12
Manglore tiles
including
Ridgeing and
Hipping
1000
Nos
21.12
18.77
15.89

13
Single Allahbad
tiles and country
tiles
1000
Nos
21.12
18.77
15.89

14
Flooring Tiles
size 0.30m x
0.30 m
1000
Nos
21.12
18.77
15.89

15
A.C.sheets
M.T.
23.47
18.77
9.39

16
Bamboos
1000
Nos
42.35
30.61
27.09
1.5 Times the rates for

17
Ballies of all
Diameters
Rmt.
0.32
0.32
0.32
1/10th time the rates for

18
Gravel
Cu.M.
10.56
8.21
5.87
5% Extra over the rates

for Transportation of
metal
19
Steam Coal
M.T.
23.47
17.60
8.21
Same as the rates for

20
G.I.Sheets
M.T.
22.29
17.60
8.21

21
R.C.C.Pipes
and Collers
M.T.
47.04
36.48
8.21
323
Same as per rates for

Machinery Hire Charges For CSR 2014-2015

Sr.No.
DESCRIPTION
UNIT
Rate for
2014-15
in Rs.
Power Roller (8 to 10 mt.)
Hour
643.00
Water Tanker (7.5 Ton) Cap.
Hour
625.00
Vibrator (Diesel)
Hour
123.00
Hour
117.00
3 (I) Vibrator (Electrical)

4
Concrete Mixer (10/7 cft.)
Hour
195.00
Asphalt Mixer 7/5. Cft.
Hour
290.00
Boiler (Asphlat) C 1125 Lit
Hour
13.00
Air Compressor 210 cfm. To 225 c.
Hour
687.00
Guniting Gun.
Hour
212.00
Day
290.00
10
Rent for Steel Water Tank.( 3000 Liter capacity

)
Bouser (7.5 M.T.)
K.M.
41.00
11
Paver Finisher (H.P. 400 to 43.5)
Hour
1004.00
12
Hour
2672.00
13
Paver Finisher Hydrostatic with sensor control

100 TPH
Hotmix plant (30 to 40 t.) (excluding heating)
Hour
2789.00
14
Heating charges for H.M. plant.
Hour
2455.00
15
Crusher (Major stone crusher 16"x10")
Hour
569.00
16
Tile Polishing Machine with Polishman.
Day
614.00
17
Welding Machine (Diesel Welding Plant)-30 HP
Hour
372.00
18
Chain and Pully
Day
184.00
19
Rotary core Driller Machinary
Day
837.00
20
Pile boring machinary 325 400 mm. Dia.
129.00
21
Builder hoist (1 ton. Cap)
Running
meter
Hour
22
Water Pump 10 to 19 H.P.
Hour
210.00
23
Generator 100 KVA
Hour
978.00
24
Generator 200 KVA
Hour
2035.00
25
Generator set 21 to 30 KVA
Hour
393.00
26
Crane (12.5 M.T. capacity)
Hour
1027.00
27
Maxi. Mix Vibratory Earth Rammer (4 H.P.)
Hour
128.00
28
Tipper (10 Cum.cap.)
Hour
718.00
324
223.00
Sr.No.
DESCRIPTION
UNIT
Rate for
2014-15
in Rs.
29
Mechanical Sprayer.
M.T.
1088.00
30
Excavator Hind Marin, 101 M capacity 2.3 cum.
Hour
2805.00
31
Motorgrader HP-145 for Light land levelling
Hour
1674.00
32
Motorgrader 3.35 blade GSB/WBM
Hour
2342.00
33
Bouzer heating( asphalt)
M.T.
165.00
34
Self propelled paver finisher H.P. 40 & 43.5
Hour
1004.00
35
Truck for roller transport (10-12 M.T.)
K.M.
68.00
36
Truck (7.5 M.T.)
K.M.
53.00
37
Hot Mix mini plant (H.P. 14)
Hour
960.00
38
Tractor-IH Super BMD
Hour
406.00
39
Tractor with Rotavator
Hour
390.00
40
Loaders (H.P. 62)
Hour
1255.00
41
Front end Loader 1 Cum. bucket Capacity
Hour
806.00
42
Poclain LC-80 (Cap. 0.9/0.95 cum. H.P. 90)
Hour
1665.00
43
Wheel Loader JCB - 3 C. (Cap 1.2 cum.)
Hour
1417.00
44
Drawn Scraper
Hour
234.00
45
Sismopactor 850-S
Hour
1709.00
46
Maxi mix Vibratory Road Roller
Hour
460.00
47
Pavement Braker
Hour
285.00
48
Wet Mix Plant 60 TPH
Hour
1283.00
49
Wet Mix Plant 75 TPH
Hour
1824.00
50
Bitumen Boiler oil Fired
Hour
192.00
51
Mastic Cooker
Hour
67.00
52
Mechanical broom Hydrolic
Hour
390.00
53
Wagon Drill
Day
4177.00
54
Dozer CAT.D.8.K
Hour
4316.00
55
Dozer CAT.D.4.E
Hour
1542.00
56
Vibratory Roller
Hour
2102.00
325
CEMENT CONSUMPTION
The standard rate of consumption of Cement for different grades

of concrete considered in schedule of rates
C.C. 1:4:8
3.40 bag/cum
C.C. M-10 /1:3:6
4.40 bag/cum
C.C.M-15/ 1:2:4
6.27 bag/cum
C.C. M-20
7.10 bag/cum
C.C. M-25
7.50 bag/cum
C.C. M-30
8.00 bag/cum
C.C. M-35
8.30 bag/cum
C.C. M-40
8.50 bag/cum
326

Nagpur CSR

Uploaded by

Copyright:

Available Formats

Nagpur CSR

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nagpur CSR

Uploaded by

Copyright:

Available Formats

Government of Maharashtra

Public Works Region, Nagpur

Schedule of Rates 2014-2015

For Nagpur, Bhandara, Gondia, Wardha,

CURRENT SCHEDULE OF RATES 2014-2015

Structural Steel Work

Plain Cement Concrete

Reinforcement Cement Concrete

Cement Concrete Hollow Block Masonary

Repairs & Rehabilitation

Plastering and Pointing

Paving , Flooring and Dado

Colour/White Washing , Distempering

Roofing and Ceiling

Doors and Windows

Water Supply and Sanitary Fittings

Antitermite and Pest control

Cross Drainage Works

Excavation & Embankment

WBM Road Construction

Machinary hire charges

Approval to C.S.R. 2014- 15

effect from 01 /07/ 2014

Notified Tribal areas or HiIly or inaccessible areas

Municipal Council areas

Sugar cane producing areas

Naxalite affected area ( For all works in

Rates are inclusive of VAT

Rs.5800/- Per M.T.

Mild Steel (Fe-500)

TMT Steel Bars

Rs. 46000/-Per M.T.

Rs. 47500/-Per M.T.

Rs. 52895/-Per M.T.

Rs. 61570/-Per M.T.

Medium setting Hincol

i) Bulk Rs. 45446/-Per M.T.

References of Standard PWD Specifications / MORTH specifications are mentioned below

Water Proofing Treatement

Flooring Dado skirting treads ( except

Ceramic tiles, Glazed tiles,flooring dado

Mangolare tile roof,Ridges Ceiling

Weather Shade Replacing External Window

Soil,waste,vent and rain water pipes and

Item not covered under Sr.No. i to xi above

BDU /BDC Structural Steel Work,Tubular trusses

Fixtures and Fastenings

Aluminium Oxidised / Stainless

Stainless steel with matt finish

Aluminium Oxidised / Stainless

Stainless steel with matt finish

10) ROAD WORK

13) Work in Foul Condition

Excavation for foundation in earth, soils of all

RATES FOR 2014-15

Excavation for foundation in hard murum

Excavation for foundation in Hard Murum and

RATES FOR 2014-15