Scribd Logo
Upload

Welcome to Scribd!

  • 85 views

    Pompa Namol Secundar - Ref

    Uploaded by

    Cretu Dan
    This document provides specifications for a secondary sludge pump. The pump is a VX186-368Q model that moves 370 cubic meters per hour of secondary sludge at 20 degrees Celsius. It operates at 50 Hz and has a maximum required power of 13.9 kW. The pump contains grey cast iron and high wear resistant steel components and has a blockring seal made of stainless steel and tungsten carbide. It is driven by an 18.5 kW motor and has flanged connections and a base for inline mounting. Performance test results are included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pompa Namol Secundar - Ref

    Uploaded by

    Cretu Dan
    85 views3 pages
    This document provides specifications for a secondary sludge pump. The pump is a VX186-368Q model that moves 370 cubic meters per hour of secondary sludge at 20 degrees Celsius. It operates at 50 Hz and has a maximum required power of 13.9 kW. The pump contains grey cast iron and high wear resistant steel components and has a blockring seal made of stainless steel and tungsten carbide. It is driven by an 18.5 kW motor and has flanged connections and a base for inline mounting. Performance test results are included.

    Original Description:

    Pompa Namol Secundar_ref

    Original Title

    Pompa Namol Secundar_ref

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a secondary sludge pump. The pump is a VX186-368Q model that moves 370 cubic meters per hour of secondary sludge at 20 degrees Celsius. It operates at 50 Hz and has a maximum required power of 13.9 kW. The pump contains grey cast iron and high wear resistant steel components and has a blockring seal made of stainless steel and tungsten carbide. It is driven by an 18.5 kW motor and has flanged connections and a base for inline mounting. Performance test results are included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    85 views3 pages

    Pompa Namol Secundar - Ref

    Uploaded by

    Cretu Dan
    This document provides specifications for a secondary sludge pump. The pump is a VX186-368Q model that moves 370 cubic meters per hour of secondary sludge at 20 degrees Celsius. It operates at 50 Hz and has a maximum required power of 13.9 kW. The pump contains grey cast iron and high wear resistant steel components and has a blockring seal made of stainless steel and tungsten carbide. It is driven by an 18.5 kW motor and has flanged connections and a base for inline mounting. Performance test results are included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Data sheet

    Date: 7/24/2013
    Customer:
    Project pos. no.: secondary sludge pump

    Type: VX186-368Q
    Process conditions
    Medium:
    Required volume flow:
    Pressure at inlet:
    Pressure at discharge:
    Differential pressure:
    Shaft deflection:

    Secondary sludge, 20.0 C


    370 m/h
    0.0 bar
    0.4 bar
    0.4 bar
    0.129 mm

    Density:
    Temperature:
    Viscosity:
    pH value:
    Dry matter content:

    1000.0 kg/m
    20.0 C
    1.0 mPas
    2.5 %

    Design data
    Operating points:
    m/h
    Hz
    379

    min-1
    50

    Starting torque: 486 Nm


    Operating torque: 291 Nm

    kW

    457

    13.9

    Max. requ. operating power: 13.9 kW


    Volumetric efficiency: 96.60%
    NPSHR (water, 20C): 3.00

    Pump specification
    Housing segments:
    Wear plates:
    Shaft pump chamber:
    Lobes:
    Max. free passage :
    Seal type:

    Grey cast iron 250 / Injection A


    HVSS High wear resistant special steel (-0.3mm)
    85 mm
    NBR / HiFlo / 4 Wings
    61 mm
    Blockring SS 316 Ti WC/SiC

    Seal carrier:
    Pressure disc/strain screw:
    O-rings in touch with medium:
    Buffer chamber medium:
    Buffer chamber options:
    Shaft deflection/bar:

    SS 316 Ti
    SS 316 Ti
    NBR
    Oil
    Buffer fluid tank, pressurised
    0.360 mm

    Assembly specification
    Motor manufacturer:
    Motor type:
    Drehzahl (min-1):
    Power:
    Voltage:
    Frequency:
    Isolation class:
    Motor efficiency classification:
    Thermistor sensor:

    Getriebebau Nord
    SK52-180MH/4
    457 min-1
    18.5 kW
    400/690 V
    50 Hz
    F
    IE2
    Yes

    Connector left: Gooseneck DN250, With flange according to EN1092-1/11


    PN10
    Connector right: Gooseneck DN250, With flange according to EN1092-1/11
    PN10
    Connector material: SS 316 Ti
    Base: Base, type in-line, galvanized
    Type of drive: HexaFlex 60 (60 mm/55 mm, 800/1600 Nm)
    Coupling or belt guard: Coupling guard, galvanized
    Total weight: Approx. 660 kg

    No

    Accessories/option
    Accessories:

    Remarks:

    Tests
    Idle torque check
    Synchronization check
    Pressure test buffer chamber
    Performance test**
    Hydrostatic test**

    Yes
    Yes
    Yes
    Yes
    Yes

    Alignment check* ***


    Noise level at 1 m
    General visual inspection
    Final inspection
    Customer inspection

    No
    No
    No
    No
    No

    Yes
    Yes
    Yes
    Yes
    Yes

    No
    No
    No
    No
    No

    * Test only for complete pump units incl. drive motor.


    ** test only for complete units incl. drive motor and known operating mode.

    Final inspection

    Created withCAPSpro Version 3.13.05

    Space required for maintenance work:

    Recommended anchor bolts:

    W = 700 mm required, 1000 mm recommended

    Size: M 16 / Length min 60 mm

    Flange data
    L
    R
    DIN
    DIN
    Standard
    DN DN250
    D 395 mm
    k 350 mm
    d 22 mm
    Hole number 12

    L
    H
    L1
    L2
    L3
    L4
    L5
    h
    u
    v
    x

    mm
    1961
    655
    212
    31
    1400
    0
    0
    377
    560
    510
    200

    y
    y2
    y3
    z

    250
    0
    0
    18

    DN250
    395 mm
    350 mm
    22 mm
    12

    Vogelsang data:
    Allowable horizontal forces: 1000N

    Customer:

    Allowable vertical forces: 1000N

    Quote no.:

    Allowable moments: 300Nm

    Order no.:
    Position no.:

    a
    b
    c
    d

    Not an assembly drawing. Concept sketch only!

    609
    457
    0
    120

    Gooseneck

    a
    b
    c
    d

    609
    457
    0
    120

    Gooseneck

    Pump type VX186-368Q


    Motor type SK52-180MH/4

    Type of drive HexaFlex 60 (60 mm/55 mm, 800/1600 N


    Coupling or belt guard Coupling guard, galvanized
    Base Base, type in-line, galvanized
    Total weight Approx. 660 kg

    Dimensions shown in mm
    Changes of dimensions reserved

    Hugo Vogelsang Maschinenbau GmbH


    Holthge 10-14, DE-49632 Essen (Oldenburg)

    General tolerances acc. to DIN ISO 2768 rough


    Created withCAPSpro Version 3.13.05

    www.vogelsang-gmbh.com

    Date: 7/24/2013

    CAPSpro Version 3.13.05

    Volume flow / speed at const. pressure


    VX186-368Q (HiFlo 4 Wings NBR)
    500.00

    70.00

    450.00
    60.00
    400.00

    379

    Volume flow in [m/h]

    300.00
    40.00
    250.00
    30.00
    200.00
    150.00

    Power in [kW]

    50.00

    350.00

    20.00

    100.00
    10.00
    50.00
    0.00

    0.00
    0

    100

    200

    300
    Speed in [min-1]

    400

    Theoretical volume flow

    New pump

    Pump with gap (0.5 mm)

    Operating points

    Water curve

    Operating power

    500
    Medium:

    600

    Water, 20,0 C
    P = 0.4 bar

    You might also like