Scribd
Upload
58 views2 pages

Type Specific Training (English) 5 TimeTable) 2-1

The document outlines a type-specific ECDIS training syllabus that covers: 1) familiarization with available functions, menu structure, display setup, safety values, alarms, route planning, monitoring, and backup systems; 2) loading charts and licenses and updating software; 3) references various onboard materials and manuals related to ECDIS operation.

Uploaded by

Gustavo P S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
58 views2 pages

Type Specific Training (English) 5 TimeTable) 2-1

The document outlines a type-specific ECDIS training syllabus that covers: 1) familiarization with available functions, menu structure, display setup, safety values, alarms, route planning, monitoring, and backup systems; 2) loading charts and licenses and updating software; 3) references various onboard materials and manuals related to ECDIS operation.

Uploaded by

Gustavo P S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Type-Specific ECDIS Training Syllabus Outline

Covered area for Type-specific ECDIS training


Familiarization with available functions
Familiarization with the menu structure
Display setup
Setting of safety values
Recognition of alarms and malfunction indicators and the actions to be taken
Route planning
Route monitoring
Changing over to backup systems
Loading charts and licenses
Updating of software

References
Item

Description
Onboard
Materials

Operation of Power On/ Off


Description of the ECDIS System
Configuration

How to Power On/ Off the ECDIS


Description of configuration of Software (Operation software, Application software)

Instruction
Manual

(7ZPNZ4056A)

2-1

3-20,24

8-3

10-8/10-10

8-1

10-6

Operation of Shifting the chart

Description of operation of ECDIS under ship power blackout


Description of configuration of Navigation sensor connected
Description of automatically Shifting the chart according to the own ship position

3-18

3-161

Description of the menu structure

How to shift the chart with the hand-cursor


How to shift the chart by entering the position from entry panel
How to shifting the chart with the cross-cursor
Description of the menu structure

2-7
2-7
2-7
2-5

3-58
3-59
3-57
2-19/23

Description of configuration of SDD (C:) and HDD (D: & E: )


Description of displaying the status for malfunction of HDD
How to switch HDD (D:) overt to HDD (E:)
* D: No.1 HDD, E: No.2 HDD
Description of time for Replacement of consumables
HDD: 2 years, UPS: 3 years, LCD backlight: 5 years

Displaying information on the


Electric Navigational charts.

How to display information of charts with "ENC/C-MAP/ARCSinformation" function

3-96
3-98

Description of the Display panel

How to displaying information added on the electronic navigation charts with "Other information" function
Description of Information of navigation sensor
Description of different between the GPS displaying position and the own-ship position (the CCRP ) displayed on the ECDIS

3-1

2-8

3-1
3-1
3-1
3-1

3-193/3-194
2-8,7-13/7-14
2-9
2-9
2-12

3-2

2-13/2-14

3-4
3-4
3-4
2-7/3-4
2-6

2-15
2-15
2-15,3-71/3-72
2-15
2-15,3-60/3-63

Description chart information available for display


+ Selecting the category of chart information for display ("Display base"/ "Standard display"/ "All other information" )
+ Selecting the object and text belonging each chart information category for display

3-7

3-64,3-168/
3-177

How to select the motion mode for the ship displayed on the chart.
How to select the azimuth mode for the ship displayed on the chart
How to measure the distance and bearing by EBL /VRM functions
Description of the alarm initiated on the ECDIS
+ Description the alarm provided in the ECDIS
+ Description user's action for alarm initiated on the ECDIS

3-9
3-9
2-8

3-66/3-69
3-66/3-69
3-99/3-113
3-30/3-36

How to set up of design parameters for route planning


(route width, arrival circle radius (normal route), navigation line type (Great circle/ Rhumb Line)
How to plan the route with table editing
+ Adding the WPT, + Inserting the WPT, + Deleting the WPT, + Moving the WPT, + Changing details parameters of WPT,
+ Changing the navigation leg

4-2

4-4/4-7

4-4

4-8/4-31

How to plan the route with graphic editing


+ Adding the WPT, + Inserting the WPT, + Deleting the WPT, + Moving the WPT, + Changing details parameters of WPT,
+ Changing the navigation leg

4-7

4-32/4-64

4-10

4-63
4-29/4-31

Description of the own ship position offset function and attention of this function
Displaying time and how to change UTC time over local time
Description of length of course vector and heading vector
Description of sounding depth
Description of route monitor panel
+ Selecting of the plan route, hand-operated setting of WPT
Description of the other information of the own ship
+ Average speed calculation for aim arrival time, + Estimated arrival time calculation by the setting average speed
How to input the event mark on the chart
Description of MOB (Men over board) function
Description of list of ports function and port registration
Description of home position function
Description Zoom out/in the chart functions

Route Planning

Route monitoring
Setting of ECDIS

How to check the safety status on the planned route


Description of the other function for planning route
+ Exporting the file of the route, + Importing the file of the route, + Editing the route with Microsoft Excel
How to select of the route and information for route monitoring
How to select WPT in the short cut of planned route
How to set up of TT/ AIS display
+ Display of TT/AIS, + Setting Target filter and CPA/TCPA
How to display of the RADAR echo
How to Set up of own ship information
+ Selecting Own ship display symbol , + Setting of Heading and course vectors, + Setting of danger detection vector
and sector , + Setting of Own ship navigation tracking
How to set up of Chart display
Description of anchor watch function
Description of the user map function Drawing " No go line" and "No go area" and entering text
Description of updating chart with manual
How to Set up for alarm detection
+Setting dangerous detection vector and sector, +Setting alarm for route monitoring,
+Selecting of the dangerous detection object and area

Charts installation and updating


Automatic sailing

Updating of the software


Explain of difference points for
Model

How to set up of ship navigation log


+ Setting record timing,, +Selecting logging item for display on the log, + Exporting navigation log with CSV file
How to set up of volume of Buzzer
How to register SA Certificate and Cell permit
How to install and update the electronic charts
How to change in the contract detail
How to creating the route ( including description of "Safety Check/Limit check" function
How to start automatic sailing
How to Start the turn
How to Stop automatic sailing
Description of updating of the software

5-1
5-6
3-24
3-27
3-13

in house
time(h)

on board
time(h)

0.25

0.25

0.5

0.5

0.5

0.25

0.25

0.25

0.25

0.25

1.25

1.25

1.75

1.25

1.5

1.25

0.5

0.5

0.25

0.25

3-17
2-12
3-40/3-45,
3-184/3-186
3-37/3-39
3-152/3-158

3-17

3-159/3-177
3-115/3-116
3-31
3-95,5-9/5-18
5-19/5-40
3-14,15,16 7-15/7-16

7-1

3-150/3-151
3-26

(6-4)
6-2,3
6-2,3
6-5

4-20/4-21
6-8/6-11
6-8/6-11
6-12

Explain of difference points between Non B-type (JAN-701/901/901M) and B-type (JAN-701B/901B/2000) in accordance with "Difference table".

0.5
10.5

0.5
8.5

a
b
c
d
e
f
g
h
i
j

Covered area for Type-specific ECDIS training


a

You might also like