Scribd Logo
Upload

Welcome to Scribd!

  • 55 views

    Pipe Specification A106 Specification A106 NPS 1/8 - 48 ANSI Schedules To 160

    Uploaded by

    Denise Koh Chin Hui
    Pipe Specification A106 covers seamless carbon steel pipe for high-temperature service suitable for bending and flanging. It specifies the pipe dimensions, materials, testing requirements, and markings. Pipe sizes range from 1/8 inch to 48 inch nominal pipe size (NPS) in ANSI pressure class schedules up to 1600. The specification outlines the allowed steel grades, chemical and tensile requirements, permissible variations in wall thickness and dimensions, required testing including hydrostatic and mechanical tests, and markings to be included on each pipe length.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pipe Specification A106 Specification A106 NPS 1/8 - 48 ANSI Schedules To 160

    Uploaded by

    Denise Koh Chin Hui
    55 views1 page
    Pipe Specification A106 covers seamless carbon steel pipe for high-temperature service suitable for bending and flanging. It specifies the pipe dimensions, materials, testing requirements, and markings. Pipe sizes range from 1/8 inch to 48 inch nominal pipe size (NPS) in ANSI pressure class schedules up to 1600. The specification outlines the allowed steel grades, chemical and tensile requirements, permissible variations in wall thickness and dimensions, required testing including hydrostatic and mechanical tests, and markings to be included on each pipe length.

    Original Description:

    Pipe Specification a106

    Original Title

    Pipe Specification a106

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Pipe Specification A106 covers seamless carbon steel pipe for high-temperature service suitable for bending and flanging. It specifies the pipe dimensions, materials, testing requirements, and markings. Pipe sizes range from 1/8 inch to 48 inch nominal pipe size (NPS) in ANSI pressure class schedules up to 1600. The specification outlines the allowed steel grades, chemical and tensile requirements, permissible variations in wall thickness and dimensions, required testing including hydrostatic and mechanical tests, and markings to be included on each pipe length.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    55 views1 page

    Pipe Specification A106 Specification A106 NPS 1/8 - 48 ANSI Schedules To 160

    Uploaded by

    Denise Koh Chin Hui
    Pipe Specification A106 covers seamless carbon steel pipe for high-temperature service suitable for bending and flanging. It specifies the pipe dimensions, materials, testing requirements, and markings. Pipe sizes range from 1/8 inch to 48 inch nominal pipe size (NPS) in ANSI pressure class schedules up to 1600. The specification outlines the allowed steel grades, chemical and tensile requirements, permissible variations in wall thickness and dimensions, required testing including hydrostatic and mechanical tests, and markings to be included on each pipe length.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Pipe Specification A106

    NPS 1/8 -- 48 ANSI Schedules to 160

    Specification

    A106

    Scope

    Covers SEAMLESS carbon steel nominal wall pipe for high-temperature service, suitable for bending, flanging
    and similar forming operations.
    NPS 1 1/2 and under may be either hot finished or cold drawn. NPS 2 and larger shall be hot finished unless otherwise
    specified.
    Killed Steel
    Open-hearth
    Electric-furnace
    Basic-oxygen
    Not covered in specification.

    Kinds of Steel
    Permitted For
    For Pipe Material
    Hot-Dipped
    Galvanizing
    Permissible Variations
    in Wall Thickness
    Chemical
    Requirements

    Tensile
    Requirements

    Hydrostatic
    Testing
    Permissible Variations
    in Weights per Foot
    Permissible
    Variations in
    Outside Diameter

    Mechanical Tests
    Specified

    Number of
    Tests Required

    Lengths

    Required Markings
    on Each Length
    (On Tags attached to
    each Bundie in case
    of Bundled Pipe)
    General
    Information

    The minimum wall thickness at any point shall not be more than 12.5% under the nominal wall thickness specified.
    Grade A
    Grade B
    Grade C
    Carbon max. %.. 0.25
    0.30
    0.35
    Manganese % 0.27 to 0.93
    0.29 to 1.06
    0.29 to 1.06
    Phosporous, max. %. 0.025
    0.025
    0.025
    Sulfur, max. % 0.025
    0.025
    0.025
    Silicon, min. % 0.10
    0.10
    0.10
    Seamless
    Grade A
    Grade B
    Grade C
    Tensile Strength, min., psi.. 48,000
    60,000
    70,000
    Yield Strength, min., psi. 30,000
    35,000
    40,000
    Inspection test pressures produce a stress in the pipe wall equal to 60% or specified minimum yield strength
    (SMYS) at room temperature. Maximum Pressures are not to exceed 2500 psi for NPS 3 and under and 2800 psi
    for the larger sizes. Pressure is maintained for not less than 5 seconds.
    Weight of any length shall not vary more than 10% over and 3.5% under that specified.
    NOTE -- NPS 4 and smaller -- weighed in lots. Larger sizes -- by length
    Outside Diameter at any point shall not vary from standard specified more than-NPS
    Over
    Under
    1 1/2 and smaller
    1/64"
    1/32"
    2 -- 4
    1/32"
    1/32"
    5 -- 8
    1/16"
    1/32"
    10 -- 18
    3/32"
    1/32"
    20 -- 26
    1/8"
    1/32"
    Tensile Test -- NPS 8 and larger -- either transverse or longitudinal acceptable
    Smaller than NPS 8 -- weighed in lots. Larger sizes -- by length.
    Flattening Test -- NPS 2 and larger.
    Bending Test(Cold) -- NPS 2 and under.
    Degree of Bend
    Diameter of Mandrel
    For Normal A106 uses
    90
    12 x nom. dia. of pipe
    For Close Coiling
    180
    8 x nom. dia. of pipe
    NPS
    On One Length From Each Lot of
    Tensile
    5 and smaller
    400 or less
    6 and larger
    200 or less
    Bonding
    2 and smaller
    400 or less
    Flattening
    2 through 5
    400 or less
    6 and over
    200 or less
    Lengths required shall be specified on order. No "jointers" permitted unless otherwise specified.
    If no definite lengths required, following practice applies:
    Single Random -- 16' - 22'. 5% may be 12' - 16'
    Double Random -- Minimum length 22', Minimum average 35'. 5% may be 16' - 22'.
    Rolled Stamped or Stenciled (Mfgrs. option)
    Manufacturer's name or brand.
    Length of pipe.
    A106 A, A106 B, A106 C.
    ANSI schedule number.
    Hydrostatic test pressure and/or NDE.
    Weight per foot (NPS 4 and larger)
    or NH if neither is specified.
    Additional "S" if tested supplementary requirements.
    * Unless otherwise specified, pipe furnished with plain ends.
    * Purchaser may specify NDE
    * Surface finish standards are outlined in specification.
    in lieu of hydrostatic test or neither

    You might also like