Desmodur RE BMS

Product Information
DESMODUR RE
Polyisocyanate Crosslinking Agent
Description
Desmodur RE polyisocyanate is a solution of triphenylmethane-4,4,4-triisocyanate in ethyl acetate.

Application
Desmodur RE polyisocyanate is a highly effective

crosslinker for adhesives based on Desmocoll
polyurethane, natural rubber or synthetic rubber.
Desmodur RE polyisocyanate is also useful for
improving adhesion to rubber-based materials.
After adding Desmodur RE polyisocyanate to a
polyurethane or rubber-based adhesive, the ready-touse two-component mixture must be used within its
pot life. Pot life is not only governed by the polymer
content of the adhesive but also by its other components (resins, antioxidants, plasticizers, solvents, etc.).
At the end of the pot life, which can vary from
several hours to one working day, the adhesive
becomes increasingly difficult to process and its
viscosity increases rapidly. Finally, irreversible gelling
occurs. The following guide values are suggested for
determining the amount of crosslinker to be used.
Amounts given are parts by weight (pbw).
To crosslink 100 pbw adhesive: Desmocoll (hydroxyl polyurethane) based adhesives (containing
20% polyurethane) should be crosslinked with 4 - 7
pbw Desmodur RE polyisocyanate. Baypren
(polychloroprene rubber) based adhesives (containing
approximately 20% rubber content) should be
crosslinked with 4 - 7 pbw Desmodur RE
polyisocyanate.
Product Specifications
Property
NCO content of solution
(DIN EN ISO 11 909,
Annex A)(%)
Value
9.3 0.2
Typical Properties*
Property
Form supplied
Non-volatile content
(DIN EN ISO 3251)
Density at 20C (DIN 53 217/5)
Viscosity at 20C (DIN 53 015)
Solvent
Flash Point (DIN 51 755)
Appearance
Value
approx. 27% in ethyl acetate
approx. 27%
approx. 1.0 g/cm
approx. 3 mPas
ethyl acetate
-4C
yellow-green or red-brown
to dark violet liquid
The color does not influence the quality of the bonds. The
product may contain flaky deposits
Storage
Desmodur RE polyisocyanate will remain stable for

six months after receipt of material by customer,
when stored in its sealed original containers at
temperatures of 10 - 25C
All Desmodur grades are highly sensitive to moisture
and react with water to form carbon dioxide and
insoluble ureas. The containers must therefore be
kept tightly sealed. Exposure to water in any form
(e.g. from damp containers or solvents or moist air)
must be avoided in order to prevent the formation of
carbon dioxide, which may cause a dangerous
increase in pressure in the containers. Exposure to
air and/or light accelerates yellowing but this has, in
general, no effect on the processing properties of the
adhesive.
* These items are provided as general information only. They are approximate values and are not part of the product specifications.
Page 1 of 2 Document contains important information and must be read in its entirety.
Health and Safety Information
Packaging
Desmodur RE polyisocyanate is supplied in metal

bottles or cans containing 0.75 kg or 55 kg respectively.
Appropriate literature has been assembled which

provides information pertaining to the health and
safety concerns that must be observed when handling Desmodur RE polyisocyanate. For materials
mentioned that are not Bayer products, appropriate
industrial hygiene and other safety precautions
recommended by their manufacturer should be
followed. Before working with any product mentioned in this publication, you must read and become
familiar with available information concerning its
hazards, proper use, and handling. This cannot be
overemphasized. Information is available in several
forms such as material safety data sheets and
product labels. For further information contact your
Bayer MaterialScience representative or the Product
and Regulatory Affairs Department in Pittsburgh, Pa.
Note: The information contained in this bulletin is current as of July 2002. Please contact Bayer
MaterialScience to determine whether this publication has been revised.
Bayer MaterialScience LLC
100 Bayer Road Pittsburgh, PA 15205-9741 Phone: 1-800-662-2927
www.BayerMaterialScienceNAFTA.com
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by
way of production evaluations), including any suggested formulations and recommendations are beyond our control. Therefore, it is imperative that you test
our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications.
This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental
standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our
standard conditions of sale. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. It is
expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with
the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us.
Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or
in fact granted under the claims of any patent.
Sales Offices
17320 Redhill Avenue, Suite 175, Irvine, CA 92614-5660 1-949-833-2351 Fax: 1-949-752-1306
1000 Route 9 North, Suite 103, Woodbridge, NJ 07095-1200 1-732-726-8988 Fax: 1-732-726-1672
2401 Walton Boulevard, Auburn Hills, MI 48326-1957 Phone: 1-248-475-7700 Fax: 1-248-475-7701
7/02
Page 2 of 2 Document contains important information and must be read in its entirety.

Desmodur RE BMS

Uploaded by

Copyright:

Available Formats

Desmodur RE BMS

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Desmodur RE BMS

Uploaded by

Copyright:

Available Formats

Product Information

Desmodur RE polyisocyanate is a solution of triphenylmethane-4,4,4-triisocyanate in ethyl acetate.

Desmodur RE polyisocyanate is a highly effective

Desmodur RE polyisocyanate will remain stable for

Health and Safety Information

Desmodur RE polyisocyanate is supplied in metal

Appropriate literature has been assembled which

You might also like